Our company provides accredited testing, inspection, certification and inspection services to all of the following Soil Excavation Machines standards with international approval.
TS 9336 Construction and excavation machinery - operating equipment
TS ISO 10264 Construction and excavation machines-Locking first motion (contact) systems
TS ISO 10266 Construction and excavation machines-Determination of slope limits for the operation of machine fluid systems-Static test method
TS ISO 10268 Construction and excavation machines-Speed reducers for dump trucks and crawler scrapers-Performance tests
TS 10279 EN ISO53 (Former number: TS 10279 ISO53) Construction and excavation machinery, tractors, agricultural and forestry machinery-Seat reference point
TS 9916-2 ISO 6405-2 Construction and excavation machinery - Symbols for operator controls and other displays section 2: Special symbols for machines, equipment and accessories
TS ISO 11862 Construction and excavation machinery - Auxiliary start system electrical connection
TS 12194 Construction and excavation machines-Ripper inserts
TS ISO 9247 Construction and excavation machinery-Electrical wires and cables-Introduction and marking principles
TS ISO 8925 Construction and excavation machinery - Fluid inspection holes
TS 1230 ISO 7129 Construction excavators - Inserts for tractors dozer, graders and scrapers - Main shapes and basic dimensions
TS 10279 ISO53: 1996 / T1 (Number modified, TS 10279 EN ISO53) Construction and excavation machinery, tractors, agricultural and forestry machinery - seat reference point
TS EN 474-3 + A1 Construction and excavation machinery - Safety - Part 3: Specifications for loaders
TS EN 474-10 + A1 Construction and excavation machinery - Safety - part 10 - Features for trenchers
TS EN ISO 3449 Construction and excavation machinery - Protective structures against falling materials - Laboratory tests and performance characteristics
TS EN ISO 3471 Construction and excavation machines-Roll-over protective structures-Laboratory tests and performance rules
TS EN ISO 3450 Construction and excavation machines - Wheeled or high-speed rubber tracked machines - Performance characteristics and testing of braking systems
TS EN ISO 3449 Construction and excavation machines-Protective structures against falling materials-Laboratory tests and performance characteristics
TS EN ISO 6682 Access to comfort zones and controls for construction and excavation machinery
TS EN 13531 + A1 Construction and excavation machines - Roll-over protection for compact excavators (dkky) -Laboratory tests and performance characteristics
TS ISO 9249 Construction and excavation machinery - Engine test rules - Net power
TS 11493 Construction and excavation machinery-Pallet bolts
tst 9511 Construction and excavation machinery - Dumpers - Terms and general specifications
TS ISO 6405-1 Construction and excavation machinery - Symbols for operator controls and other displays - Part 1: Common symbols
TS EN ISO 2867 Construction and excavation machinery-Access systems
TS EN ISO 3450 Construction and excavation machines-Brake systems of rubber wheeled machines -Systems and working characteristics and test principles
TS EN 474-4 + A2 Construction and excavation machinery - Safety - Part 4: Specifications for backhoe loaders
TS EN ISO 6165 Construction and excavation machinery - Basic types - Definition, terms and descriptions
TS ISO 6015 Soil diggers - Hydraulic excavators and backhoe loaders
TS 11530 Track bushes for tracked construction and excavation machinery
TS ISO 7132 Earthmoving machinery - Tipper - Terminology and commercial properties
TS ISO 7132 Earthmoving machines - Dumpers - Terms and Commercial Properties
TS 12510 Authorized services - Rules for construction and excavation machinery
TS EN 474-5 + A3 Construction and excavation machinery - Safety - Part 5: Features for hydraulic excavators
TS EN ISO 3164 Construction and excavation machines-Laboratory evaluation of protective structures-Deviation limit volume properties
TS EN 474-1 + A4 Construction and excavation machinery - Safety - Part 1: General features
TS 12205 Road rollers
TS EN 474-1 + A4 / AC Construction and excavation machinery - Safety - Part 1: General features
TS EN 12643 Construction and excavation machines - Tire wheeled machines - Guidance rules
TS EN 474-5 + A3 Construction and excavation machinery - Safety - Part 5: Features for hydraulic excavators
TS EN 474-1 + A4 Construction and excavation machinery - Safety - Part 1: General features
TS EN 474-4 + A2 Construction and excavation machinery - Safety - Part 4: Specifications for backhoe loaders
TS EN 474-1 + A4 / AC Construction and excavation machinery - Safety - Part 1: General features
TS 12194 Construction and excavation machines-Ripper inserts
TS 12310 Construction and excavation machines - Backhoe and plunger tips "
TS ISO 5006 Earthmoving Machinery - Field of view of the operator - Test method and performance criteria
TS ISO 6395 Acoustic-Measurement of external noise emitted by construction and excavation machines-Dynamic test conditions
TS ISO 6395 Acoustics - Construction and excavation machines - Determination of sound power level - Dynamic test conditions
TS ISO 6396 Construction and excavation machinery - Determination of emission sound pressure level in operator position - Dynamic test conditions
TS ISO 12509 Construction and excavation machinery - Lighting, signaling and marking lamps and reflector devices
TS ISO 10265 Construction and excavation machines - Crawler machines - Performance characteristics and test procedures for brake systems
tst ISO 10968 Construction and excavation machinery-Operator controls
TS ISO 10570 Construction and excavation machines - Articulated chassis lock - Performance requirements
TS ISO 7451 Construction and excavation machinery - Volumetric capacities for excavator type and grab type buckets of hydraulic excavators and backhoe loaders
TS ISO 10567 Construction and excavation machines - Hydraulic diggers - Lifting capacity
TS ISO 10567 Construction and excavation machines-Hydraulic excavators-Lifting capacity
TS ISO 12117-2 Earthmoving - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Rollover t Protective structures for Excavator (ROPS) above 6
TS ISO 12117-2 Construction and excavation machinery - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Rolling protection structures for excavators on 6 t (YKKY)
TS ISO 10265: 2008 Construction and excavation machines - Crawler machines - Performance characteristics and test procedures for brake systems
TS ISO 10570 Construction and excavation machines-Articulated chassis lock-Performance requirements
TS EN ISO 6682 Construction and excavation machinery - Access to comfort zones and controls
Construction and excavation machinery - Laboratory assessment of operator seat vibration (ISO 7096: 2008) TS EN ISO 2009: 7096 / AC: 2000
TS EN ISO 7096 Construction and excavation machinery - Laboratory evaluation of operator seat vibration (ISO 7096: 2000)
TS ISO 12117-2 / Cor 1 Earthmoving - Performance requirements for laboratory tests and protective structures of excavators - Part 2: Rollover t Over 6 Protective structures for excavators (ROPS)
TS ISO 12117-2 / cor 1 Construction and excavation machinery - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Roll-over protection structures for excavators over 6 ton (YKKY)
TS ISO 12509 Construction and excavation machinery - Lighting, signaling and marking lamps and reflector devices
TS ISO 21573-1 Construction machinery and equipment-Concrete pump - Part 1: Terminology and commercial characteristics
TS ISO 7451 Construction and excavation machinery - Volumetric capacities for excavator type and grab type buckets of hydraulic excavators and backhoe loaders
TS ISO 6396 / Cor 1 Construction and excavation machinery - Determination of emission sound pressure level at operator position - Dynamic test conditions REVOLUTION 1
TSE K 398 Seats for tractors and heavy machinery
TS EN ISO 3411 Construction and excavation machines-Physical dimensions of operators and smallest dimensions of operator compartment
TS ISO 9244 Construction and excavation machinery-Machine safety signs-General principles
TS ISO 10261 Construction and excavation machinery - Numbering system for product promotion
TS ISO 4250-3 Construction and excavation machinery - Tires and wheels - Part 3: Wheels
TS ISO 10262 / Cor 1: 2009 Construction and excavation machines - Hydraulic excavators - Operating characteristics of operator protective housings - Laboratory tests
TS ISO 6393 Acoustic-Measurement of external noise emitted from construction and excavation machines-Constant test condition
TS ISO 6394 Acoustic-Measurement of external noise emitted from construction and excavation machines at operator position-Constant test conditions
TS ISO 7135 Construction and excavation machinery - Hydraulic excavators - Terms and commercial specifications
TS ISO 10968 Construction and excavation machinery-Operator controls
TS ISO 10263-3 Construction and excavation machinery-Environmental conditions at the operator's premises-Section 3: Test method for pressurizing the operator compartment
TS ISO 10263-4 Construction and excavation machinery-Environmental conditions in the operator's premises-Section 4: Ventilation, heating and / or air conditioning test method of the operator compartment
TS ISO 10263-6 Construction and excavation machinery-Environmental conditions at the operator's premises-Section 6: Determination of the heating effect of the sun on the operator's compartment
TS ISO 9533 Construction and excavation machines - Front and rear mounted audible warning devices sound test method
TS ISO 13459 Construction and excavation machinery-Tipper trucks-Educational seat / compartment
TS ISO 10263-1 Construction and excavation machinery -Environmental conditions within the operator's compartment-Section 1 general and recipes
TS ISO 10263-2 Construction and excavation machinery - Environmental conditions in the operator compartment section 2 air filter test
TS ISO 10263-5 Construction and excavation machinery -Environmental conditions in the operator department -Chapter 5: Test method of primary de-icing system
TS ISO 11112: 1995 / Amd 1: 2001 Earthmoving Machinery - Operator's Seat - Dimensions and requirements; Change 1
9247: 1990 / Amd 1: 1998 Earthmoving machines - Electrical wires and cables - Identification and marking Principles; Change 1
10532: 1995 / Amd 1: 2004 Construction and excavation machinery - Rescue equipment connected to the machine - Performance requirements; Change 1; Technical Fix 1
TS ISO 5006 Technical Corrigendum 1 Machines earthmoving - Operator field vision - Test method and performance criteria; Technical Corrigendum 1
TS 12205 / T1 Road rollers
TS EN 474-8 + A1 Construction and excavation machinery - Safety - part 8: Features for graders
TS EN 474-2 + A1 Construction and excavation machinery - Safety - Part 2: Features for tractor dozers
TS EN 474-6 + A1 Construction and excavation machinery - Safety - part 6: Specification for tipper trucks
TS EN 474-7 + A1 Construction and excavation machinery - Safety - part 7: Features for scrapers
TS EN 474-9 + A1 Construction and excavation machinery - Safety - part 9 - Specification for pipelayers
TS EN 474-11 + A1 Construction and excavation machinery - Safety - part 11: Specification for soil and garbage compactors
TS EN 474-12 + A1 Construction and excavation machinery - Safety - Part 12: Features for rope diggers
tst EN 500-1 + A1 Mobile road construction machinery-Safety rules-Part 1-General rules
TS 1230-1 Construction and excavation machines-Blades cutting edges (for graders, dozers, scrapers)
TS 1230-2 ISO 7129 Construction excavators-Inserts for tractors dozer, graders and scrapers-Main shapes and basic dimensions
TS 1230 ISO 7129 / T1 The number of this standard has been modified as ts 1230-2 iso 7129
TS EN ISO 2860 Smallest inlet dimensions for construction and excavation machinery
TS EN ISO 3411 Construction and excavation machines-Physical dimensions of operators and smallest dimensions of operator compartment
TS EN ISO 3457 Construction and excavation machinery - Protectors - Recipes and rules
TS 3803 ISO 6014 Construction and excavation machines-Determination of speed in the field
TS 3804 Soil excavation and transport machines-Dumper bodies-Volume determination
TS 3804 / T1 Soil excavation and transport machines - Tipper bodies - Volume determination
TS 3805 ISO 6484 Construction and excavation machines-Elevators scrapers-Volumetric capacities
TS 3806 Soil excavation and transport machinery - Tractor open body scraper volume determination method
TS ISO 4510-2 Construction and excavation machinery-Service hand tools part 2: Mechanical puller and thrusters
TS 4803-1 ISO 6746-1 Construction and excavation machines-Description of dimensions and symbols-Section 1: Main machine
TS 4803-2 ISO 6746-2 Construction and excavation machines-Description of dimensions and symbols-Section 2: Equipment
TS EN ISO 6683 Construction and excavation machinery - Seat belt and seat belt fasteners - Performance rules and tests
TS ISO 6750 Construction and excavation machinery - Operation and maintenance manuals
TS EN ISO 7096 / AC Construction and excavation machinery - Laboratory evaluation of operator seat vibration
TS EN ISO 7096 Construction and excavation machinery - Laboratory evaluation of operator seat vibration
TS 7273 Soil - Determination of the center of gravity of construction equipment
TS ISO 7546 Construction and excavation machinery-Loader and front-loading excavator buckets-Volumetric capacities
TS ISO 6392-2 Construction and excavation machines-Lubrication connections-Part 2: Grease gun nozzles
TS ISO 8643 Construction and excavation machinery - Controlled boom lowering control for hydraulic diggers and backhoe loaders - Features and tests
TS ISO 8813 Construction and excavation machines - Lifting capacity of pipelayers, rubber wheel dozers or side boom loaders
TS ISO 8927 Construction and excavation machines-Machine availability-Terms
TS 9184 Earthmoving machines - Blade screw heads - Shape and dimensions (excluding thread sizes)
TS ISO 9245 Construction and excavation machinery-Machine productivity terms, symbols and units
TS ISO 9246 Construction and excavation machines-Crawler and rubber wheel dozer blades-Volumetric ratios
TS ISO 9248 Construction and excavation machinery - Units of dimensions, performance and capacities and their measurement accuracy
TS 9491 ISO 6012 Construction and Excavation - Machines & Equipment
TS 9670 ISO 7136 Construction Excavators - Pipe Layers - Recipes and Technical Specifications
TS 9724 ISO 7133 Construction and excavation machines-Tractor scrapers-Terms and commercial features
TS 9725 Construction and excavation machinery - Principles for operator training
TS 9726 ISO 7134 Construction and excavation machinery-Graders-Term and commercial properties
TS 9727 ISO 7457 Construction and excavation machines - Determination of rotational dimensions of rubber wheeled machines
TS 10118 Construction and excavation machines-Tensile rod measurement method
TS 10119 Construction and excavation machinery - Training of operation and maintenance technicians
TS 10203 Construction and excavation machinery-Rollers, roller and tire wetting systems
TS ISO 10262 Construction and excavation machines - Hydraulic excavators - Operating characteristics of operator protective housings - Laboratory tests
TS 10278 ISO 6747 Construction and Excavating Machinery - Tractor Dozers - Terms and Commercial Properties
TS 10280 Construction and excavation machinery-Protection and storage
TS 10286 Excavators and loaders for construction and excavation machinery
TS 10327 ISO 7131 Construction and Excavators - Loaders - Terms and Commercial Properties
TS ISO 10532 Construction and excavation machines-Rescue equipment connected to the machine-Working conditions
TS ISO 10533 Construction and excavation machinery - Lifting arm support equipment
TS 10690 Construction and excavation machinery-Loaders tipping loads and methods of measuring buoyancy of equipment
TS 10819 ISO 6016 Construction and excavation machinery - Methods of measuring the mass of the machine with equipment and parts
TS 10831 Construction and excavation machinery-Service tools-Part 1-For general maintenance and adjustment-Type and dimensions
TS ISO 11112 Construction and excavation machines-Dimensions and features of the operator seat
TS 11340 Construction and Excavators - Track Shoe
TS 11340 / T1 Construction and Excavating Machines - Track Shoe
TS 11340 / T2 Construction and Excavating Machines - Track Shoe
TS 11491 Construction and Excavation Machines - Track Pin
TS 11491 / T1 Construction and Excavation Machinery - Track Pin
TS 11492 Construction and excavation machines-Pallet links
TS 11492 / T1 Construction and excavation machines-Pallet links
TS 11492 / T2 Construction and excavation machines-Pallet links
TS 11492 / T3 Construction and excavation machines-Pallet links
TS 11529 Towing hook - for construction and excavation machinery
TS 11530 Track bushes for tracked construction and excavation machinery
TS 11609 Construction and excavation machines - Pallet nuts
TS 11737 Draw frame gear - for construction and excavation machinery
TS 11737 / T1 Draw frame gear - for construction and excavation machinery
TSE ISO / TR 11776 Thin metal containers - Non-round open top boxes - Cans according to rated capacity
TS 12155 Construction and excavation machines-Pallet roller bush
TS 12156 Construction and excavation machines - Track roller cap
TS 12157 Construction and digging machines - Track roller spindle
TS 12178 Construction machinery
TS 12188 Road rollers - Steel rollers
TS 12189 Road rollers scrapers
TS 12202 Construction and excavation machines-Pallet chains-Dimensions
TS 12224 Construction and excavation machinery
TS 12310 Construction and excavation machines - Backhoe and plunger tips "
TS 12311 Construction and excavation machinery - Diggers, plungers and ripper inserts - Adapters (spacers)
TS 12491 Construction machinery-Excavator operator
TS 12492 Construction machinery-grader operator
TS 12493 Loader operator
TS ISO 12508 Construction and excavation machines-Operator's and maintenance areas-Rounding edges
TS ISO 12511 Construction and excavation machinery
TS 12662 Tractor operator - for agricultural work
TS ISO 13333 Construction and excavation machinery - Dump truck support and operator cab tilt support devices
TS 13506 Businesses - Providing rental of construction equipment - General rules
TS EN 13531 + A1 Construction and excavation machines - Roll-over protection for compact excavators (dkky) - Laboratory tests and performance characteristics
TS EN 15573 Soil excavators - Design rules for roaming on the road