All of the following standards are realized by our high level service quality. We are interested in the testing, inspection and certification services of the following standards which are necessary for you.
TS 9336 Construction and excavation machinery - operating equipment
TS 11422 Hoisting Technology
TS ISO 10264 Construction and excavation machines-Locking first motion (contact) systems
TS ISO 10266 Construction and excavation machines-Determination of slope limits for the operation of machine fluid systems-Static test method
TS ISO 10268 Construction and excavation machines-Speed reducers for dump trucks and crawler scrapers-Performance tests
TS 10279 EN ISO53 (Former number: TS 10279 ISO53) Construction and excavation machinery, tractors, agricultural and forestry machinery-Seat reference point
TS 9916-2 ISO 6405-2 Construction and excavation machinery - Symbols for operator controls and other displays section 2: Special symbols for machines, equipment and accessories
TS ISO 11862 Construction and excavation machinery - Auxiliary start system electrical connection
TS 12194 Construction and excavation machines-Ripper inserts
TS ISO 9247 Construction and excavation machinery-Electrical wires and cables-Introduction and marking principles
TS EN 61057 1 insulating boom antenna elements used in operation under voltage exceeding kv aa
TS 1543 ISO 251 Conveyor belts - Width and lengths
TS ISO 8925 Construction and excavation machinery - Fluid inspection holes
TS EN 12530 Swivel castors and castors - Swivel castors and castors for indoor applications
TS EN 12533 Swivel castors and wheels - Swivel castors and castors for applications with speeds from 1,1 m / s (4 km / h) to 4,4 m / s (16 km / h)
TS EN 45510-6-8 Power station equipment supply guide - Section 6-8: Turbine aids - Cooling water systems
TS EN ISO 505 Conveyor belts - Test method for resistance to tear in carcass
TS 3964 ISO 5048 Continuous mechanical conveying equipment - Conveyor belt conveyors - Calculation of operating force and tensile forces
TS 1230 ISO 7129 Construction excavators - Inserts for tractors dozer, graders and scrapers - Main shapes and basic dimensions
TS EN 13411-5 + A1 Terminators for steel wire ropes - Safety - part 5: U-bolt wire rope terminals
TS EN 13414-1 + A2 Steel wire rope slings - Safety - Part 1: Slings for general lifting applications
TS EN 13414-2 + A2 Steel wire rope slings - Safety - part 2: Information for use and maintenance information to be provided by the manufacturer
TS EN 13414-3 + A1 Steel wire rope slings - Safety - part 3: Endless rope slings
TS EN 1757-3 Safety in industrial vehicles - Pedestrian-controlled, manual and semi-automatic vehicles - Part 3: Vehicles with platform
TS EN 13827 Conveyor belts with steel cord - Determination of lateral and vertical play of steel cords
TS 10279 ISO53: 1996 / T1 (Number modified, TS 10279 EN ISO53) Construction and excavation machinery, tractors, agricultural and forestry machinery - seat reference point
TS EN 13411-7 + A1 Terminators for steel wire ropes - Safety - Part 7: Symmetrical wedge socket
TS EN ISO 21183-1 Lightweight conveyor belts - Part 1: Main characteristics and applications
TS EN 474-3 + A1 Construction and excavation machinery - Safety - Part 3: Specifications for loaders
TS EN 474-10 + A1 Construction and excavation machinery - Safety - part 10 - Features for trenchers
TS EN ISO 3449 Construction and excavation machinery - Protective structures against falling materials - Laboratory tests and performance characteristics
TS EN 1756-1 + A1 Tail lifts - Platform lifts for wheeled vehicles - Safety regulations - Part 1: Tail lifts for lifting goods
TS EN 818-1 + A1 Short link chain - For lifting purposes - Safety - Part 1: General acceptance requirements
TS EN 818-3 + A1 Short link chain - For lifting purposes - Safety - part 3: Medium tolerance chain for chain slings - Quality class 4
TS EN 818-4 + A1 Short link chain - For lifting purposes - Safety - section 4: Chain slings - Quality class 8
TS EN 818-5 + A1 Short link chain - For lifting purposes - Safety - section 5: Chain slings - Quality class 4
TS EN 818-6 + A1 Short link chain - For lifting purposes - Safety - part 6: Chain slings - Technical specification for use and maintenance information to be provided by the manufacturer
TS EN 818-7 + A1 Short link chain - For lifting purposes - Safety - Part 7: Fine-tolerance chain hoist, quality class t (type t, type dat and type dt)
TS EN 1677-2 + A1 Sling components - Safety - part 2: Ratchet, forged steel lifting hooks, quality class 8
TS EN 1677-3 + A1 Sling components - Safety - part 3: Self-locking forged steel hooks - Quality class 8
TS EN 12077-2 + A1 Safety on cranes - Health and safety regulations - Part 2: Limiting and indicating devices
TS EN 13586 + A1 Cranes - Access
TS EN 818-4 + A1 Short link chain - for lifting purposes - Safety - Part 4: Chain slings - Quality class 8
TS EN 818-5 + A1 Short link chain - for lifting purposes - Safety - Part 5: Chain slings - Quality class 4
TS EN 1677-1 + A1 Sling components - Safety - Part 1: Forged steel elements - Quality class 8
TS EN 1677-4 + A1 Sling components - Safety - Part 4: Links - Quality class 8
TS EN 1677-5 + A1 Sling components - Safety - Part 5: Ratchet forged steel lifting hooks - Quality class 4
TS EN 1677-6 + A1 Sling components - Safety - Part 6: Links - Quality class 4
TS EN 12644-2 + A1 Cranes - Operating and test instructions - Part 2: Marking
TS EN ISO 3471 Construction and excavation machines-Roll-over protective structures-Laboratory tests and performance rules
TS EN ISO 3450 Construction and excavation machines - Wheeled or high-speed rubber tracked machines - Performance characteristics and testing of braking systems
TS EN 1526 + A1 Safety of industrial vehicles - Additional requirements for automatic functions on vehicles
TS EN ISO 3449 Construction and excavation machines-Protective structures against falling materials-Laboratory tests and performance characteristics
TS EN ISO 6682 Access to comfort zones and controls for construction and excavation machinery
TS EN 12053 + A1 Safety of industrial cargo vehicles - Test methods for the measurement of noise emissions
TS EN 12644-1 + A1 Cranes - Operating and test instructions - Section 1: Instructions
TS EN 12644-2 + A1 Cranes - Operating and test instructions - Part 2: Marking
TS EN 1677-5 + A1 Sling components - Safety - part 5: Ratchet forged steel lifting hooks - Quality class 4
TS EN 1677-6 + A1 Sling components - Safety - Part 6: Links - Quality class 4
TS EN 13889 + A1 Forged steel locks - D-shaped and spring type for general lifting purposes - Quality class 6 - Safety
TS EN 13059 + A1 Safety of industrial trucks - Test methods for vibration measurement
TS EN 13827 Conveyor belts with steel cord - Determination of lateral and vertical displacement of steel cords
TS EN 13414-1 + A2 / T1 Steel wire rope slings - Safety - Part 1: Slings for general lifting applications
TS EN 13531 + A1 Construction and excavation machines - Roll-over protection for compact excavators (dkky) -Laboratory tests and performance characteristics
TS EN 1494 + A1 Jacks and associated lifting equipment, which can be moved when loaded or not moved (loaded when unloaded)
TS EN 1492-4 + A1 Textile slings - Safety - Part 4: Made of natural and man-made fibers for general use
TS EN 1492-2 + A1 Textile slings - Safety - Part 2: Round slings made of man-made fibers for general use
TS EN 1492-1 + A1 Textile slings - Safety - Part 1: Plain thick woven slings made of man-made fibers for general use
TS EN 14010 + A1 Safety in machinery - Power driven parking equipment in motor vehicles - Safety and emu requirements during design, manufacturing, installation and commissioning
TS EN 14010 + A1 Safety in machinery - Power driven parking equipment in motor vehicles - Safety and emu requirements during design, manufacturing, installation and commissioning
TS EN 1459 + A3 Safety in industrial vehicles - self-propelled variable access vehicles
TS ISO 9249 Construction and excavation machinery - Engine test rules - Net power
TS EN 1495 + A2 Lifts-Column working platforms
TS EN 13448 + A1 Agricultural and forestry machines-Row mowing units-Safety
TS EN 14492-1 + A1 Cranes - Cranes and hoists - Power driven - Part 1: Power driven cranes
TS EN 14492-1 + A1 Cranes - Cranes and hoists - Power driven - Part 1: Power driven cranes
TS EN 13889 + A1 Forged steel connection locks - For general lifting purposes (d and spring type) - Quality class 6 - Safety
TS EN 1495 + A2 / AC Lifting platforms - Column work platforms
TS EN 1495 + A2 Platforms - Columnar work platforms
TS EN 1495 + A2 / AC Lifting platforms - Column work platforms
TS EN 60204-32 Safety in machinery - Electrical devices in machinery - Part 32: Requirements for hoisting machines
TS EN 13411-3 + A1 / T1 Terminators for steel wire ropes - Safety - part 3: Clamps and clamp safety
TS 11493 Construction and excavation machinery-Pallet bolts
TS EN ISO 3266 Bolts - for general lifting purposes, of forged steel, with ring head - quality class 4
TS EN 14492-2 + A1 / AC Cranes - Cranes and hoists - Power driven cranes - Part 1: Power driven cranes
TS EN 818-6 + A1 Short link chain - Safety for lifting purposes - Part 6: Chain slings - Technical specifications for operating and maintenance information to be provided by the manufacturer
tst EN ISO 9856 Conveyor belts - Determination of flexibility module
TS EN 14658 + A1 Continuous transport equipment and systems - Continuous transport equipment used in open pit lignite mines - General safety rules
TS EN 1493: 2010 Vehicle lifts
TS EN 619 + A1 Continuous transport equipment and systems - Safety and emu requirements for mechanical transport of unit loads
TS EN 15878 Steel static storage systems - Terms and definitions
TS EN 617 + A1 Continuous transport equipment and systems - Safety and electromagnetic compatibility (emu) for equipment used for storing bulk material in silos, bunkers, warehouses and warehouses
TS EN 618 + A1 Continuous conveying equipment and systems - Safety and emu rules for the mechanical handling of bulk materials, except fixed belt conveyors
TS EN 620 + A1 Continuous transport equipment and systems - Safety and emu rules for fixed belt conveyors for the transport of bulk materials
TS EN 620 + A1 Continuous transport equipment and systems - Safety and emu rules for fixed belt conveyors for the transport of bulk materials
TS EN 619: 2002 + A1: 2010 Continuous transport equipment and systems - Safety and emu requirements for mechanical transport of unit loads
TS EN 617: 2001 + A1: 2010 Continuous transport equipment and systems - Safety and electromagnetic compatibility (emu) for equipment used for storing bulk material in silos, bunkers, warehouses and warehouses
TS 1702 Shovels, slips and handles
TS 11422 Hoisting Technology
tst 9511 Construction and excavation machinery - Dumpers - Terms and general specifications
TS EN 618 + A1 Continuous conveying equipment and systems - Safety and emu rules for the mechanical handling of bulk materials, except fixed belt conveyors
TS EN 1175-3 + A1 Industrial - Safety in vehicles - Electrical requirements - Part 3: Particular requirements for the electrical transmission systems of vehicles with internal combustion engines
TS EN 1175-1 + A1 Safety in industrial vehicles - Electrical requirements - Part 1: General requirements for battery-powered vehicles
TS EN 1756-1 + A1 Tail lifts - Platform lifts for wheeled vehicles - Safety regulations - Part 1: Tail lifts for lifting goods
TS EN 13557 + A2 Cranes - controls and controls
TS EN 13586 + A1 Cranes - Access
TS EN 818-2 + A1 Short link chain-For lifting purposes -Safety-Section 2: Medium tolerance chain for chain slings-Quality class 8
TS EN 818-3 + A1 Short link chains - For lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings
TS EN 818-7 + A1 Short link chain - For lifting purposes - Safety - Part 7: Precision-tolerant lifting chain, quality class T (type T, type DAT and type DT)
TS EN 818-1 + A1 Short link chain for lifting purposes - Safety - Part 1: General acceptance requirements
TS EN 1677-2 + A1 Sling components - Safety - Part 2: Latched, forged steel hooks, quality class 8
TS EN 1677-3 + A1 Sling components - Safety - Part 3: Self-locking forged steel hooks -Quality class 8
TS ISO 6405-1 Construction and excavation machinery - Symbols for operator controls and other displays - Part 1: Common symbols
TS EN ISO 22721 Conveyor belts - textured with textile carcass rubber or plastic for underground mines - Specifications
TS EN 1492-4 + A1 Textile slings - Safety - Part 4: Lifting slings made of natural and man-made ropes for general services
TS EN ISO 2867 Construction and excavation machinery-Access systems
TS EN 13411-8 Terminators for steel wire ropes - Safety - Part 8: Forging terminals and die forging (pinching)
TS 11508 Material handling equipment (used for military purposes)
TS EN ISO 3450 Construction and excavation machines-Brake systems of rubber wheeled machines -Systems and working characteristics and test principles
tst 483 Iron Trolleys
TS EN 14985 Cranes - Crane
TS EN 474-4 + A2 Construction and excavation machinery - Safety - Part 4: Specifications for backhoe loaders
TS EN 15830 Vehicles with variable access on rough terrain - Visibility - Test methods and verification
TS ISO 2139 Continuous mechanical conveying equipment for bulk granular materials - Rocking gutters and tubular gutters rocking or reciprocating feeders
TS ISO 2109 Continuous mechanical handling equipment for bulk granular materials - Light duty belt conveyors
TS EN ISO 6165 Construction and excavation machinery - Basic types - Definition, terms and descriptions
TS ISO 1537 Continuous mechanical conveying equipment for bulk granular materials - Corrugated belt conveyors (excluding portable conveyors) - Rollers
TS ISO 1050 Continuous mechanical handling equipment for bulk granular materials - Screw conveyors
TS ISO 1535 Continuous mechanical conveying equipment for bulk granular materials - Corrugated belt conveyors (excluding portable conveyors) - Belts
TS ISO 1807 Continuous mechanical conveying equipment for bulk granular materials - Vibrating conveyors with rectangular or trapezoidal grooves and rocking or reciprocating feeders
TS ISO 6015 Soil diggers - Hydraulic excavators and backhoe loaders
TS ISO 1816 Continuous mechanical handling equipment for bulk materials and unit loads - Belt conveyors - Key features of motor-driven rollers
TS ISO 1815 Continuous mechanical handling equipment for bulk materials - Vibrating feeders and pipe corrugated conveyors
TS ISO 3739-3 Industrial tires and wheels - Part 3: Wheels
TS EN 12999 + A1 Cranes - Loader cranes
TS 1228 Steel Wire Rope Puller
TS 1228 Steel Wire Rope Puller
TS ISO 5049-1 Portable equipment for the continuous transport of bulk materials - Part 1: Rules for the design of steel structures
TS EN ISO 1120 Conveyor belts - Determination of the strength of mechanical connections - Static test method
TS EN 1554 Conveyor Belts - Drum Friction Test
TS EN 12999 + A1 Cranes - Loader cranes
TS 11530 Track bushes for tracked construction and excavation machinery
TS EN 13001-3-1 + A1 Cranes - General design - Part 3-1: Boundary conditions and adequacy verification of steel structures
TS EN ISO 284 Conveyor belts - Electrical conductivity - Specification and test method
TS EN ISO 15147 Lightweight conveyor belts - Length and width tolerances on cut light conveyor belts
TS EN ISO 14890 Conveyor belts - For general purposes - Properties of conveyors with rubber or plastic coated textile carcasses
TS EN 13135 Cranes safety; design; Requirements for equipment
TS EN 16307-5 Industrial trucks - Safety requirements and verification - Part 5: additional requirements for pedestrian motor trucks
TS EN ISO 21180 Lightweight conveyor belts - Determination of maximum tensile strength
TS EN ISO 21181 Lightweight conveyor belts - Determination of elastic method in free state
TS EN ISO 21182 Lightweight conveyor belts - Determination of coefficient of friction
TS EN ISO 21179 Lightweight conveyor belts - Determination of the electrostatic field generated by the lightweight conveyor belts in operation
TS EN ISO 21178 Lightweight conveyor belts - Determination of electrical resistance
TS EN 12077-2 + A1 Safety on cranes - Health and safety regulations - Part 2: Limiting and indicating devices
TS ISO 7132 Earthmoving machinery - Tipper - Terminology and commercial properties
TS EN ISO 14890 Conveyor belts - For general purposes - Properties of conveyors with rubber or plastic coated textile carcasses
TS ISO 7132 Earthmoving machines - Dumpers - Terms and Commercial Properties
TS 12510 Authorized services - Rules for construction and excavation machinery
TS 10116 Cranes - Test and inspection methods
TS EN 13001-3-1 + A1 Cranes-General design-Section 3-1: Boundary conditions and adequacy verification of steel structures
TS EN ISO 8094 Conveyor belts with steel cord - Test of adhesion strength of coating to belt carcass
TS EN ISO 16851 Textile conveyor belts - Endless (two ends joined together) - Net length determination test method
TS EN 474-5 + A3 Construction and excavation machinery - Safety - Part 5: Features for hydraulic excavators
TS EN ISO 3164 Construction and excavation machines-Laboratory evaluation of protective structures-Deviation limit volume properties
TS EN 1837 + A1 Safety in machinery - Lighting systems integrated in machinery
TS 11987 / T1 Chains, steel, round section, quality class 3- calibrated
TS EN 474-1 + A4 Construction and excavation machinery - Safety - Part 1: General features
TS EN 13852-1 Cranes - Off-shore cranes - Part 1: Off-shore cranes
TS 12205 Road rollers
TS EN 13411-8 Terminators for steel wire ropes - Safety - Part 8: Forged connectors and die forging
TS EN 474-1 + A4 / AC Construction and excavation machinery - Safety - Part 1: General features
TS EN 12643 Construction and excavation machines - Tire wheeled machines - Guidance rules
TS EN 15011 + A1 Cranes - Bridge and portal cranes
TS 10689 Stability stackers and pallet stackers
TS 10689 Stability stackers and pallet stackers
TS EN 474-5 + A3 Construction and excavation machinery - Safety - Part 5: Features for hydraulic excavators
TS EN 474-1 + A4 Construction and excavation machinery - Safety - Part 1: General features
TS EN 474-4 + A2 Construction and excavation machinery - Safety - Part 4: Specifications for backhoe loaders
TS EN 474-1 + A4 / AC Construction and excavation machinery - Safety - Part 1: General features
TS EN 280 + A1 Mobile work platforms that can be upgraded - Design calculations - Balance criteria - Construction - Safety - Inspection and tests
TS EN 15011 + A1 Cranes - Bridge and portal cranes
TS ISO 7363 Cranes and lifting equipment - Technical characteristics and acceptance documents
TS ISO 13202 Cranes - Measurement of speed and time parameters
TS ISO 14518 Cranes - Rules for test loads
TS ISO 11629 Cranes - Measuring the mass of a crane and its components
TS EN 16307-6 Industrial vehicles - Safety requirements and verification - Part 6: Additional requirements for load and personnel carriers
TS EN 16203 Safety in industrial vehicles - Dynamic tests for verification of lateral stability - Stability-weighted vehicles
TS EN 12881-1 Conveyor belts - Flammability test with fire simulation section 1: Propane combustion test
TS EN 13000: 2010 + A1 Cranes - mobile cranes
TS EN 13001-2 Crane safety - General design - Part 2: Load effects
TS EN 13001-2 Crane safety - General design - Part 2: Load effects
TS 12194 Construction and excavation machines-Ripper inserts
TS 12310 Construction and excavation machines - Backhoe and plunger tips "
TS ISO 5006 Earthmoving Machinery - Field of view of the operator - Test method and performance criteria
TS ISO 6395 Acoustic-Measurement of external noise emitted by construction and excavation machines-Dynamic test conditions
TS ISO 6395 Acoustics - Construction and excavation machines - Determination of sound power level - Dynamic test conditions
TS ISO 6396 Construction and excavation machinery - Determination of emission sound pressure level in operator position - Dynamic test conditions
TS ISO 12509 Construction and excavation machinery - Lighting, signaling and marking lamps and reflector devices
TS ISO 10265 Construction and excavation machines - Crawler machines - Performance characteristics and test procedures for brake systems
tst ISO 10968 Construction and excavation machinery-Operator controls
TS ISO 10570 Construction and excavation machines - Articulated chassis lock - Performance requirements
TS ISO 7451 Construction and excavation machinery - Volumetric capacities for excavator type and grab type buckets of hydraulic excavators and backhoe loaders
TS ISO 10567 Construction and excavation machines - Hydraulic diggers - Lifting capacity
TS ISO 10567 Construction and excavation machines-Hydraulic excavators-Lifting capacity
TS ISO 12117-2 Earthmoving - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Rollover t Protective structures for Excavator (ROPS) above 6
TS EN 13001-3-2 Cranes - General design - Part 3-2: Competence limit conditions and durability of wire ropes in rigging systems
TS EN 16307-6 Industrial vehicles - Safety requirements and verification - Part 6: Additional requirements for freight and personnel carriers
TS EN 16203 Safety in industrial vehicles - Dynamic tests for verification of lateral stability - Counterweight vehicles
TS ISO 12117-2 Construction and excavation machinery - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Rolling protection structures for excavators on 6 t (YKKY)
TS ISO 10265: 2008 Construction and excavation machines - Crawler machines - Performance characteristics and test procedures for brake systems
TS ISO 10570 Construction and excavation machines-Articulated chassis lock-Performance requirements
TS ISO 22915-1 Industrial vehicles - Verification of stability - Part 1: General
TS ISO 22915-8 Industrial vehicles - Verification of stability - Part 8: Stability tests for vehicles operating under special conditions for stacking, with the carriage tilted forward and backward
TS EN ISO 6682 Construction and excavation machinery - Access to comfort zones and controls
Construction and excavation machinery - Laboratory assessment of operator seat vibration (ISO 7096: 2008) TS EN ISO 2009: 7096 / AC: 2000
TS EN ISO 7096 Construction and excavation machinery - Laboratory evaluation of operator seat vibration (ISO 7096: 2000)
TS EN 1570-2 Safety rules for lifting tables - Fixed descends more than 2 for lifting tables. Goods with vertical travel speed not exceeding 0,15 m / s
TS EN 1570-1: 2011 + A1 Safety regulations for lifting tables - Part 1: Lift tables operating for two fixed positions
TS ISO 13202 Crane - measurement of speed and time parameters
TS ISO 22915-1 Industrial vehicles - Verification of stability - Part 1: General
TS EN 13001-3-3 Cranes - General design - Part 3-3: Verification of the boundary conditions and suitability of wheel / rail contacts
TS ISO 12117-2 / Cor 1 Earthmoving - Performance requirements for laboratory tests and protective structures of excavators - Part 2: Rollover t Over 6 Protective structures for excavators (ROPS)
TS ISO 12117-2 / cor 1 Construction and excavation machinery - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Roll-over protection structures for excavators over 6 ton (YKKY)
TS EN 13001-3-3 Cranes - General design - Part 3-3: Verification of the boundary conditions and suitability of wheel / rail contacts
TS EN 14973 Conveyor belts for use in underground installations - Electrical and flammability safety features
TS EN 14492-2 + A1 Cranes - Cranes and winches with power drives - Part 2: Power driven winches
TS EN 14492-2 + A1 / AC Cranes - Cranes and hoists - Power driven cranes - Part 1: Power driven cranes
TS EN 15095 + A1 Powered mobile storage carousel system, sorting and shelving system and storage lift - Safety rules
TS ISO 11629 Cranes - Mass measurement of a crane and its components
ISO ISO 22915-8 Industrial vehicles - Verification of stability - Part 8: Additional stability tests for vehicles operating under special conditions for stacking, with the carriage tilted forward and backward
TS ISO 12509 Construction and excavation machinery - Lighting, signaling and marking lamps and reflector devices
TS ISO 21573-1 Construction machinery and equipment-Concrete pump - Part 1: Terminology and commercial characteristics
TS ISO 21573-1 Construction machinery and equipment-Concrete pump - Part 1: Terminology and commercial characteristics
TS ISO 7451 Construction and excavation machinery - Volumetric capacities for excavator type and grab type buckets of hydraulic excavators and backhoe loaders
TSE K 360 Tire repair materials
TS ISO 14518 Cranes - Rules for test loads
TS ISO 7363 Cranes and lifting equipment - Technical characteristics and acceptance documents
TS EN 13000: 2010 + A1 Cranes - mobile cranes
tkt 2015101574 GENERAL DRAWINGS
TS ISO 6396 / Cor 1 Construction and excavation machinery - Determination of emission sound pressure level at operator position - Dynamic test conditions REVOLUTION 1
TSE K 398 Seats for tractors and heavy machinery
TS ISO 4306-2 Cranes - Terms and definitions - Part 2: Overhead traveling cranes
TSE K 501 Refrigerated boxes
TS EN ISO 3411 Construction and excavation machines-Physical dimensions of operators and smallest dimensions of operator compartment
TSE K 414 Roller Tire Used in Conveyor Belt Systems
TSE K 438 Scraper eraser made of polyurethane
TSE K 417 Grinding Mills Coating Elements
TS ISO 9244 Construction and excavation machinery-Machine safety signs-General principles
TS ISO 11660-2 Cranes-Access, enclosures and holders-Section 2: Overhead cranes
TS ISO 9942-1 Cranes-Information labels-Part 1: General
TS ISO 10261 Construction and excavation machinery - Numbering system for product promotion
TS ISO 433 / Amd 1 Conveyor belts - Marking
TS ISO 5285 Conveyor belts - Storage and transport rules
TS ISO 4195 Conveyor belts - Heat resistance - Test method and properties
TS ISO 10247 / Amd 1 Conveyor belts - Properties of coatings - Classification
TS ISO 16877 Short link chains for lifting purposes - Quality TH for hand operated handpieces, precision tolerance
TS ISO 16872 Short link chains for lifting purposes - Quality class VH for hand operated hoists, with precision tolerance
TS ISO 4250-3 Construction and excavation machinery - Tires and wheels - Part 3: Wheels
TS ISO 10262 / Cor 1: 2009 Construction and excavation machines - Hydraulic excavators - Operating characteristics of operator protective housings - Laboratory tests
TS ISO 6393 Acoustic-Measurement of external noise emitted from construction and excavation machines-Constant test condition
TS ISO 6394 Acoustic-Measurement of external noise emitted from construction and excavation machines at operator position-Constant test conditions
High lift trucks with TS ISO 6055 drive - Overhead protectors - Feature and test
TS ISO 7135 Construction and excavation machinery - Hydraulic excavators - Terms and commercial specifications
TS ISO 10968 Construction and excavation machinery-Operator controls
TS ISO 8566-1 Cranes-Cabins-Section 1: General
TS ISO 10263-3 Construction and excavation machinery-Environmental conditions at the operator's premises-Section 3: Test method for pressurizing the operator compartment
TS ISO 10263-4 Construction and excavation machinery-Environmental conditions in the operator's premises-Section 4: Ventilation, heating and / or air conditioning test method of the operator compartment
TS ISO 10263-6 Construction and excavation machinery-Environmental conditions at the operator's premises-Section 6: Determination of the heating effect of the sun on the operator's compartment
TS ISO 9533 Construction and excavation machines - Front and rear mounted audible warning devices sound test method
TS ISO 4305 Overhead traveling cranes - Determination of stability
TS ISO 6292 Reinforced industrial trucks and dozers - Brake performance and strength of parts
TS ISO 13459 Construction and excavation machinery-Tipper trucks-Educational seat / compartment
TS ISO 4309 Cranes - Wire ropes - Application rules for inspection and decommissioning
TS ISO 9928-1 Cranes - Crane Operating Manual Section 1: General
TS ISO 9927-1 Cranes-Inspections-Part 1: General
TS ISO 10263-1 Construction and excavation machinery -Environmental conditions within the operator's compartment-Section 1 general and recipes
TS ISO 10263-2 Construction and excavation machinery - Environmental conditions in the operator compartment section 2 air filter test
TS ISO 10263-5 Construction and excavation machinery -Environmental conditions in the operator department -Chapter 5: Test method of primary de-icing system
TS ISO 22915-13: 2012 Industrial trucks - Verification of stability - Part 13: Rough terrain trucks with mast
TS ISO 22915-14: 2010 Industrial trucks - Verification of stability - Part 14: Rough terrain variable stacker trucks
TS ISO 11112: 1995 / Amd 1: 2001 Earthmoving Machinery - Operator's Seat - Dimensions and requirements; Change 1
TS ISO 12488-1: 2012 Crane - Tolerances for wheels and travel and traversing parts - Part 1: General
TS ISO 12482 Cranes - Crane monitoring for design working period
TS ISO 22883: 2004 Wheels and wheels - requirements for applications up to 1,1 m / s (4 km / h)
TS ISO 22884: 2004 Wheels and wheels - requirements for 1,1 m / s (4 km / h) and up applications 4,4 m / s (16 km / h)
TS ISO 3189-1: 1985 / Cor 1: 2002 Slot for general purpose wire ropes - Part 1: General specifications and acceptance requirements
TS ISO 22915-8: 2008 Industrial trucks - Stability Verification - Part 8: additional stability test for trucks operating special case stacking with mast forward curved and raised load
9247: 1990 / Amd 1: 1998 Earthmoving machines - Electrical wires and cables - Identification and marking Principles; Change 1
10532: 1995 / Amd 1: 2004 Construction and excavation machinery - Rescue equipment connected to the machine - Performance requirements; Change 1; Technical Fix 1
TS ISO 12488-1: 2012 Crane - Tolerances for wheels and travel and sleeper rails - Part 1: General
TS ISO 5006 Technical Corrigendum 1 Machines earthmoving - Operator field vision - Test method and performance criteria; Technical Corrigendum 1
TS EN 1808 Hanging access hardware safety rules - design calculations, stability criteria, construction - Tests
TS EN 13001-1 Cranes - General design - Part 1: General principles and rules
TS EN 280 + A1 Upgradeable mobile work platforms - Design calculations - Balance criteria - Construction - Safety - Inspection and tests
TS EN 12882 Conveyor belts - General purpose - Electrical and flammability safety rules
TS ISO 22915-13: 2012 / Cor 1: 2013 Industrial trucks - Stability Verification - Part 13: Rough terrain trucks with mast; Technical Corrigendum 1
TS ISO 5293 Conveyor belts - Formula for passage distance between three equal distance conveyor rollers and end drum
TS ISO 5293: 2004 / Cor 1: 2008 Conveyor belts - The formula for the passage distance between the three equal distance conveyor rollers and the end drum; Technical Corrigendum 1
tst EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
TS EN 1993-6 / tst AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS EN 13001-3-2 Cranes - General design - Part 3-2: Verification of boundary conditions and conformity of wire ropes in rope winding systems
TS ISO 3512 Power transmission elements - Chains and sprockets - Twisted link, for heavy duty
TS EN ISO 7623 Steel braided conveyor belts adhesion test of mesh to coating-Original and after heat treatment
TS EN ISO 283 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at reference load - Test method
TS EN ISO 7622-1 Steel braided conveyor belts-Longitudinal tensile test-Section 1: Elongation measurement
tst 10113 Lifting equipment-Classification-Section 2: Mobile cranes
TSE K 509 Short link chain - For lifting purposes - Safety - Chain slings - Quality class 10
TS EN ISO 3691-5 Industrial vehicles - Safety requirements and verification - Part: 5 - Pedestrian-controlled vehicles
TS EN 1808 Hanging access hardware safety rules - design calculations, stability criteria, construction - Tests
TS EN ISO 3691-2 Industrial vehicles - Safety requirements - Part: 2 - Self Propelled Variable Access Vehicles
TS EN 1459-2 Rugged Off-Road Vehicles - Safety Rules and Verification - Part 1: Variable Access Rotating Vehicles
TS EN 12895 Industrial vehicles - Electromagnetic compatibility
TS EN ISO 3691-6 Industrial vehicles - Safety requirements and verification - Part: 6 - Cargo and Personnel carriers
TS EN 1755 Industrial vehicles - Safety rules and verification - Complementary requirements for operation in potentially explosive atmospheres
TS EN ISO 3691-5 Industrial vehicles - Safety requirements and verification - Part: 5 - Pedestrian-controlled vehicles
TS EN ISO 3266 / A1 Screws - for general lifting purposes, of forged steel, with ring head - quality class 4
tst EN ISO 7623 Steel braided conveyor belts adhesion test of mesh to coating-Original and after heat treatment
tst EN ISO 283 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at reference load - Test method
tst EN ISO 7622-1 Steel braided conveyor belts-Longitudinal tensile test-Section 1: Elongation measurement
TS EN 14973 Conveyor belts for use in underground installations - Safety requirements for electrical and flammability
tst EN ISO 3266 / A1 Screws - for general lifting purposes, of forged steel, with ring head - quality class 4
TS ISO 4301-2 Cranes - Classification - Part 2: Overhead Cranes
TS ISO 4301-2 Cranes - Classification - Part 2: Overhead Cranes
TS EN ISO 3691-1 Industrial vehicles - Safety requirements and verification - Part 1: Self-propelled industrial vehicles except driverless trucks, variable-access trucks and cargo-carrying trucks
TS EN 12882 Conveyor belts - General purpose - Electrical and flammability safety rules
TS EN 12881-1 Conveyor belts - Flammability test with fire simulation section 1: Propane combustion test
TS EN 16307-1: 2013 + A1 Industrial Trucks - Safety Rules and verification - Part 1: Additional requirements for self-propelled industrial trucks except driverless trucks, variable-access trucks and cargo-carrying trucks
TS EN 1459-2 Rugged off-road vehicles - Safety requirements and verification - Part 2: Rotary vehicles with variable access
TS EN 1459-3 Rugged off-road vehicles - Safety requirements and verification - Part 3: Interface between variable access vehicles and work platform
TS EN 16681 Steel static storage systems - Adjustable pallet racking systems - Design rules for earthquakes
TS EN ISO 3691-1 / AC Industrial vehicles - Safety requirements and verification - Part 1: Self-propelled industrial vehicles except driverless trucks, variable-access trucks and cargo-carrying trucks
Industrial vehicles - Safety requirements and verification - Part: 3691 - Pedestrian-controlled vehicles TS EN ISO 5-5 / AC Industrial vehicles
TS EN ISO 3691-6 / AC Industrial vehicles - Safety requirements and verification - Part: 6 - Cargo and personnel carriers
TS ISO 18878 Upgradeable mobile work platforms -Operator (driver) training
TS EN 13001-3-5 Cranes - General design - Part 3-5: Boundary status of latch hooks and verification of suitability
TS EN 13001-3-5 Cranes - General design - Part 3-5: Boundary status of latch hooks and verification of suitability
TS EN 16974 Conveyor belts - Requirements, test - Conveyor belts depending on belt width Indentation rolling resistance
TS ISO 3739-3 / D1 Industrial tires and wheels - Part 3: Wheels
TSE CEN / TR 16829 Protection and prevention of bucket elevators from fire and explosion
TS EN ISO 9856 Conveyor belts - Determination of flexibility module
TS EN ISO 15236-1 Conveyor belts with steel cord - Part 1 - Design, dimensions and mechanical properties for general purpose conveyor belts
Industrial vehicles - Safety requirements - Part: 3691 - Self Propelled Variable Access Vehicles TS EN ISO 2-2016: 2 / AC Industrial vehicles
TS EN 16796-1 Energy efficiency of industrial trucks - Test methods - Part 1: General
TS EN 16796-2 Energy efficiency of industrial trucks - Test methods - Part 2: Operator controlled self-propelled trucks, tow tractors and load-carrying trucks
TS EN 16796-3 Energy efficiency of industrial trucks - Test methods - Part 3: Container transport lift trucks
TS ISO 22915-2 Industrial trucks - Verification of stability - Part 2: Mast-balanced trucks
TS ISO 18878 Upgradeable mobile work platforms - Operator training
TS EN 1570-2 Safety rules for lifting tables - Fixed descends more than 2 for lifting tables. Goods with vertical travel speed not exceeding 0,15 m / s
tst EN ISO 15236-1 Conveyor belts with steel cord - Part 1 - Design, dimensions and mechanical properties for general purpose conveyor belts
tst EN 16974 Conveyor belts - Requirements, test - Conveyor belts depending on belt width Indentation rolling resistance
tst EN 13001-3-5 Cranes - General design - Part 3-5: Boundary status of latch hooks and verification of suitability
tst EN 13001-3-5 Cranes - General design - Part 3-5: Boundary status of latch hooks and verification of suitability
TS EN ISO 703 Conveyor belts - Transverse flexibility (corrugation) - Test method
TS EN ISO 15236-2 Conveyor belts with steel cord - Part 2: Preferred belt types
TS EN 16851 Cranes - Lightweight crane systems
TS EN ISO 3691-3 Industrial vehicles - Safety requirements and verification - Part 3: Additional safety requirements for trucks with operator position elevation and trucks designed to move with raised load
TS EN 1496 Fall protection - Rescue lifting equipment
TS EN 13000: 2010 + A1 Cranes - mobile cranes
TS EN ISO 703 Conveyor belts - Transverse flexibility (corrugation) - Test method
TS EN ISO 15236-2 Conveyor belts with steel cord - Part 2: Preferred belt types
TS 12205 / T1 Road rollers
TS 4 Excavations
TS 4 / T1 Excavations
TS EN 81-43 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 43: Elevators for cranes
TSE K 100 Parachute winches for boats
TSE K 100 / T1 Parachute winches for boats
TS EN ISO 252 Conveyor belts - Bonding between main elements - Test methods
TS ISO 282 Conveyor belts - Sampling
TS ISO 433 Conveyor belts - Marking
TS EN 474-8 + A1 Construction and excavation machinery - Safety - part 8: Features for graders
TS EN 474-2 + A1 Construction and excavation machinery - Safety - Part 2: Features for tractor dozers
TS EN 474-6 + A1 Construction and excavation machinery - Safety - part 6: Specification for tipper trucks
TS EN 474-7 + A1 Construction and excavation machinery - Safety - part 7: Features for scrapers
TS EN 474-9 + A1 Construction and excavation machinery - Safety - part 9 - Specification for pipelayers
TS EN 474-11 + A1 Construction and excavation machinery - Safety - part 11: Specification for soil and garbage compactors
TS EN 474-12 + A1 Construction and excavation machinery - Safety - Part 12: Features for rope diggers
TS 483 Iron Trolleys
TS 483 / T1 Iron Trolleys
TS 483 Iron Trolleys
tst EN 500-1 + A1 Mobile road construction machinery-Safety rules-Part 1-General rules
TS EN ISO 505 Conveyor belts - Method for determination of tear resistance in textile conveyor belts
TS EN 528 Rail storage and retrieval equipment - Safety
TS EN ISO 583 Textile conveyor belts - Total belt thickness and thickness of main elements - Test methods
TS EN 741 + A1 Continuous loading, transport and unloading equipment and systems - Safety requirements for pneumatic loading, transport and unloading systems and components of bulk materials
TS EN 818-2 + A1 Short link chain - For lifting purposes - Safety - part 2: Medium tolerance chain for chain slings - Quality class 8
TS ISO 938 Trolleys - main dimensions
TS 943 ISO 1084 Industrial tractors - Description and rated capacity
TS ISO 1044 Lead-acid traction accumulators for industrial vehicles-Electric vehicles-Preferred voltages
tst 1544 ISO 1049 Continuous mechanical conveying equipment for bulk granular materials - Rectangular or trapezoidal corrugated rocking conveyors and conveyors
TS ISO 1049 Continuous mechanical conveying equipment for bulk granular materials - Rectangular or trapezoidal corrugated rocking conveyors and conveyors
TS EN 1175-2: 1998 + A1: 2010 Safety in industrial vehicles - Electrical requirements section 2: for vehicles with an internal combustion engine - General requirements
TS 1230-1 Construction and excavation machines-Blades cutting edges (for graders, dozers, scrapers)
TS 1230-2 ISO 7129 Construction excavators-Inserts for tractors dozer, graders and scrapers-Main shapes and basic dimensions
TS 1230 ISO 7129 / T1 The number of this standard is modified as ts 1230-2 iso 7129TS 1363 ISO 610 Chain conveyors and coal plows - High tensile steel chains (round ring)
TS 1364 ISO 1082 Clamp type fasteners used in mining-chain conveyors
TS EN 1398 Mobile loading ramps
TS EN 1492-2 + A1 Textile slings - Safety - Part 2: Round slings made of man-made fibers for general use
TS EN 1492-1 + A1 Textile slings - Safety - Part 1: Plain thick woven slings made of man-made fibers for general use
TS EN 1493 Vehicle lifting equipment
TS EN 1494 + A1 Movable or movable jacks and combined lifting equipment
TS EN 1525 Industrial vehicles - Safety - Driverless vehicles and systems
TS EN 1526 + A1 Safety of industrial vehicles - Additional requirements for automatic functions on vehicles
TS ISO 1536 Continuous mechanical conveying equipment for bulk granular materials - Belt drums for corrugated belt conveyors (other than portable conveyors)
tst ISO 1536 Continuous mechanical conveying equipment for bulk granular materials - Belt drums for corrugated belt conveyors (except for portable conveyors)
tst 1547 ISO 1536 Continuous mechanical conveying equipment for bulk particulate matter - Corrugated belt conveyors (excluding portable conveyors) - Belt drums
TS EN 1757-3 Safety in industrial vehicles - Pedestrian-controlled, manual and semi-automatic vehicles - Part 3: Vehicles with platform
TS EN 1837 + A1 Safety in machinery - Integrated lighting of machinery
TS 1943 Continuous mechanical conveying equipment for bulk granular materials - Dimensions of elbows used in pneumatic transport
TS 1944 Continuous mechanical handling equipment - Mobile and portable conveyors - Structural features
TS 1977 Continuous mechanical transport equipment for bulk particulate matter - Safety rules for wagon pads (swivel, side and top discharge) that unload rail cars
TS ISO 1977 Conveyor chains, equipment and sprockets
TS EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
TS EN 1993-6 / AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS 2088 Handling equipment - Terms
TS ISO 2140 Continuous conveying equipment - For loose bulk materials - Articulated conveyors
TS 2270 Continuous conveying equipment for bulk granular materials
TS 2340 Hooks (for lifting load)
TS ISO 2374 Lifting machines - Range of maximum capacities for main models
TS EN ISO 2860 Smallest inlet dimensions for construction and excavation machinery
TS 3013 Continuous mechanical handling equipment - Classification and symbolization of bulk particulate matter
TS 3014 Continuous mechanical conveying equipment for bulk particulate matter - Safety rules for pneumatic conveying hoses and fittings
TS ISO 3056 Lifting chain and chain slings with uncalibrated round steel links, operation and maintenance
TS ISO 3075 Short link chain for lifting purposes - Quality class s (6), used in uncalibrated chain slings etc.
TS ISO 3189-1 General purpose wire rope sockets-Section 1: General specifications and acceptance requirements
TS ISO 3189-2 General purpose wire rope sockets - Part 2: Special requirements for sockets made by forging or stock removal
TS ISO 3189-3 General purpose wire rope sockets - Part 3: Particular requirements for sockets manufactured by casting
TS ISO 3287 Motor vehicles - Symbols for operator controls and other displays
TS EN ISO 3411 Construction and excavation machines-Physical dimensions of operators and smallest dimensions of operator compartment
TS EN ISO 3457 Construction and excavation machinery - Protectors - Recipes and rules
TS ISO 3569 Continuous mechanical transport equipment-Classification of unit loads
TS ISO 3676 Packaging-Unit load sizes-Dimensions
TS 3803 ISO 6014 Construction and excavation machines-Determination of speed in the field
TS 3804 Soil excavation and transport machines-Dumper bodies-Volume determination
TS 3804 / T1 Soil excavation and transport machines - Tipper bodies - Volume determination
TS 3805 ISO 6484 Construction and excavation machines-Elevators scrapers-Volumetric capacities
TS 3806 Soil excavation and transport machinery - Tractor open body scraper volume determination method
TS ISO 3870 Conveyor belts (textile carcass - up to 300 meters between roller centers for loose bulk materials - Adjustment of tensioning device
TS 3902 Continuous mechanical handling equipment - Classification of bucket elevators
TS ISO 4123 Belt conveyors-Discs for return rollers and impact rings for conveyor rollers-Main dimensions
TS ISO 4301-4 Cranes and related equipment-Classification-Part 4: Jib cranes
TS ISO 4301-5 Cranes-Classification-Part 5: Overhead traveling cranes and gantry cranes
TS ISO 4304 Cranes other than traveling and floating cranes - General requirements for stability
TS ISO 4306-5 Cranes - Terms - Part 5: Bridge and gantry cranes
TS ISO 4306-3 Cranes - Terms - Section 3: Tower cranes
TS ISO 4306-1 Cranes - Terms - Part 1: General
TS ISO 4510-2 Construction and excavation machinery-Service hand tools part 2: Mechanical puller and thrusters
TS ISO 4778 Chain slings-Welded-Quality classes m (4), s (6) and t (8)
TS 4803-1 ISO 6746-1 Construction and excavation machines-Description of dimensions and symbols-Section 1: Main machine
TS 4803-2 ISO 6746-2 Construction and excavation machines-Description of dimensions and symbols-Section 2: Equipment
TSE ISO / TR 5045 Continuous mechanical transport equipment - Safety rule for belt conveyors - Examples of enclosure of pinch points
TSE ISO / TR 5046 Continuous mechanical transport equipment - Safety rule for chain conveyors and elevators - Examples of enclosure of the clamping points
TSE ISO / TR 5047 Continuous mechanical conveying equipment - Chain conveyors with conveyors or load carriers - Examples of protection against injuries caused by load carriers
TS ISO 5050 Continuous mechanical conveying equipment - Calibrated round steel link chain, vertical bucket elevators - General features
TS ISO 5053 Motorized industrial vehicles - Terms
TS 5054 Crane rails
TS ISO 5057 Industrial vehicles - Inspection and repair of fork lift forks in use
TS27 Loaders (used with farm tractors)
TS27 / T1 preloaders (used with farm tractors)
TS ISO 5612 Scraper bars for mining chain conveyors
TS ISO 5613 Mining - Drive gear groups for chain conveyors
TS ISO 6392-2 Construction and excavation machines-Lubrication connections-Part 2: Grease gun nozzles
TS 6642 Mining machines - main dimensions of the flat deep bucket bucket
TS EN ISO 6683 Construction and excavation machinery - Seat belt and seat belt fasteners - Performance rules and tests
TS ISO 6750 Construction and excavation machinery - Operation and maintenance manuals
TS ISO 6973 Chains for conveyors forged, without rivet
TS EN ISO 7096 / AC Construction and excavation machinery - Laboratory evaluation of operator seat vibration
TS EN ISO 7096 Construction and excavation machinery - Laboratory evaluation of operator seat vibration
TS ISO 7189 Continuous mechanical conveying equipment - apron conveyors - Design rules
TS 7273 Soil - Determination of the center of gravity of construction equipment
TS ISO 7296-2 Cranes - Graphic symbols - Part 2: Overhead cranes
TS ISO 7546 Construction and excavation machinery-Loader and front-loading excavator buckets-Volumetric capacities
TS EN ISO 7590 Conveyor belts with steel cord - Methods for determination of total thickness and coating thickness
TS ISO 7592 Lifting chains with calibrated round steel link - Convenient operation and maintenance manual
TS 8422 Portable belt conveyors (used in agriculture)
TSE ISO / TR 8435 Continuous mechanical conveying equipment - Safety rule for belt conveyors - Examples of protection of clamping points on conveyor rollers
TS ISO 8566-2 Cranes-Cabins-Section 2: Mobile cranes
TS ISO 8566-3 Cranes-Cabins-Section 3: Tower cranes
TS ISO 8566-4 Cranes-Cabins-Section 4: Jib cranes
TS ISO 8566-5 Cranes-Cabins-Section 5: Overhead traveling and gantry cranes
TS ISO 8643 Construction and excavation machinery - Controlled boom lowering control for hydraulic diggers and backhoe loaders - Features and tests
TS ISO 8813 Construction and excavation machines - Lifting capacity of pipelayers, rubber wheel dozers or side boom loaders
TSE ISO / TR 8865 Mining - Guidance on verification of sprocket sizes for chain conveyors
TS ISO 8927 Construction and excavation machines-Machine availability-Terms
TSE ISO / TR 9172 Continuous mechanical conveying equipment - Safety rule for screw conveyors - Examples of enclosure and breaking points
TS 9184 Earthmoving machines - Blade screw heads - Shape and dimensions (excluding thread sizes)
TS ISO 9245 Construction and excavation machinery-Machine productivity terms, symbols and units
TS ISO 9246 Construction and excavation machines-Crawler and rubber wheel dozer blades-Volumetric ratios
TS ISO 9248 Construction and excavation machinery - Units of dimensions, performance and capacities and their measurement accuracy
TS ISO 9373 Cranes and equipment-Accuracy properties of measurement variables during the test
TS ISO 9374-1 Cranes-Information for supply - Part 1: General
TS ISO 9374-4 Cranes-Information for supply-Section 4: Jib cranes
TS ISO 9374-5 Cranes-Information for supply-Part 5: Overhead traveling cranes and gantry cranes
TS ISO 9386-2 Power-driven lifting platforms for mobility-impaired people - Safety, dimensions and functional requirements - Part 2: Power-driven stair lift for moving users, standing users and wheelchair users in a tilted plane
TS ISO 9386-1 Power-driven lifting platforms for the disabled - Requirements for safety, dimensions and functional operation - Part 1: Vertical lifting platforms
TS 9491 ISO 6012 Construction and Excavation - Machines & Equipment
TS 9670 ISO 7136 Construction Excavators - Pipe Layers - Recipes and Technical Specifications
TS 9724 ISO 7133 Construction and excavation machines-Tractor scrapers-Terms and commercial features
TS 9725 Construction and excavation machinery - Principles for operator training
TS 9726 ISO 7134 Construction and excavation machinery-Graders-Term and commercial properties
TS 9727 ISO 7457 Construction and excavation machines - Determination of rotational dimensions of rubber wheeled machines
TS ISO 9926-1 Cranes-Training of operators-Section 1: General
TS 10111 ISO 1837 Lifting hooks - designation
TS 10118 Construction and excavation machines-Tensile rod measurement method
TS 10119 Construction and excavation machinery - Training of operation and maintenance technicians
TS 10123 ISO 2328 Stackers (fork fibers) - Hook type fork arms and fork carriage trays-Coupling dimensions
TS 10124 fork lift forks-Dimensions
TS 10125 stacker (fork lift) - Hook type - Fork arms - Terms
TS 10162 Mobile cranes - Drum and pulley dimensions
TS 10201 ISO 3184 Stackers - Transport and pedestal type - Stability tests
TS 10203 Construction and excavation machinery-Rollers, roller and tire wetting systems
TS ISO 10245-5 Cranes-Limiting and warning devices-Section 5: Overhead traveling cranes and gantry cranes
TS ISO 10247 Conveyor belts - Properties of coatings - Classification
TS ISO 10262 Construction and excavation machines - Hydraulic excavators - Operating characteristics of operator protective housings - Laboratory tests
TS 10278 ISO 6747 Construction and Excavating Machinery - Tractor Dozers - Terms and Commercial Properties
TS 10280 Construction and excavation machinery-Protection and storage
TS 10286 Excavators and loaders for construction and excavation machinery
TS 10327 ISO 7131 Construction and Excavators - Loaders - Terms and Commercial Properties
TSE ISO / TR 10357 Conveyor belts - Formula for the passage distance of three equal length conveyor rollers (new method)
TS ISO 10532 Construction and excavation machines-Rescue equipment connected to the machine-Working conditions
TS ISO 10533 Construction and excavation machinery - Lifting arm support equipment
TS ISO 10658 Industrial vehicles - Additional stability test operating under special stacking conditions where the load is laterally displaced by motorized devices
TS 10690 Construction and excavation machinery-Loaders tipping loads and methods of measuring buoyancy of equipment
TS 10699 Agricultural machinery-Screw conveyor-Portable
TS 10819 ISO 6016 Construction and excavation machinery - Methods of measuring the mass of the machine with equipment and parts
TS 10823 ISO 2330 Forklifts - Forks - Technical characteristics and testing
tst ISO 10972-5 Cranes - Specification for mechanisms - Part 5: Bridge and gantry cranes
tst ISO 10972-1 Cranes - Features for Mechanisms Section 1: General
TS ISO 10973 Cranes - Spare Parts Manual
TS ISO 11112 Construction and excavation machines-Dimensions and features of the operator seat
TS 11340 Construction and Excavators - Track Shoe
TS 11340 / T1 Construction and Excavating Machines - Track Shoe
TS 11340 / T2 Construction and Excavating Machines - Track Shoe
TS 11420 Rope pulleys for lifting machines
TS 11491 Construction and Excavation Machines - Track Pin
TS 11491 / T1 Construction and Excavation Machinery - Track Pin
TS 11492 Construction and excavation machines-Pallet links
TS 11492 / T1 Construction and excavation machines-Pallet links
TS 11492 / T2 Construction and excavation machines-Pallet links
TS 11492 / T3 Construction and excavation machines-Pallet links
TS 11529 Towing hook - for construction and excavation machinery
TS 11530 Track bushes for tracked construction and excavation machinery
TS 11609 Construction and excavation machines - Pallet nuts
TS ISO 11630 Cranes - Measuring wheel parallelism
TS 11737 Draw frame gear - for construction and excavation machinery
TS 11737 / T1 Draw frame gear - for construction and excavation machinery
TSE ISO / TR 11762 Thin metal containers - Open-top round boxes for gas-filled liquid products - Classification of box sizes by type of construction
TSE ISO / TR 11776 Thin metal containers - Non-round open top boxes - Cans according to rated capacity
TS 11810 Bar bending tool
TS 11987 Chains - Steel - Round section, quality class 3 - Calibrated
TS ISO 11994 Cranes - Usability - Terms and definitions
TS EN 12053 + A1 Safety of industrial cargo vehicles - Test methods for measuring noise emissions
TS 12155 Construction and excavation machines-Pallet roller bush
TS 12156 Construction and excavation machines - Track roller cap
TS 12157 Construction and digging machines - Track roller spindle
tst EN 12159 + A1 Construction cranes - For transporting personnel and materials - With vertical guide rail, with cab
TS 12178 Construction machinery
TS 12188 Road rollers - Steel rollers
TS 12189 Road rollers scrapers
TS EN 12195-4 Load holding devices on road vehicles - Safety - Part 4: Steel load ropes "
TS EN 12195-3 Load holding devices on road vehicles - Safety - Part 3: Chains
TS EN 12195-3 Load holding devices on road vehicles - Safety - Part 3: Chains
TS ISO 12210-4 Cranes - Fastening devices for working and non-working conditions - Part 4: Jib cranes
TS ISO 12210-1 Cranes - Fastening devices for working and non-working conditions - Part 1: General
TS 12224 Construction and excavation machinery
TS 12310 Construction and excavation machines - Backhoe and plunger tips "
TS 12311 Construction and excavation machinery - Diggers, plungers and ripper inserts - Adapters (spacers)
TS ISO 12478-1 Cranes-Maintenance Manual-Section 1: General
TS ISO 12480-1 Cranes - Safe operation - Part 1: General
TS 12490 Construction equipment - Dozer operator
TS 12491 Construction machinery-Excavator operator
TS 12492 Construction machinery-grader operator
TS 12493 Loader operator
TS ISO 12508 Construction and excavation machines-Operator's and maintenance areas-Rounding edges
TS ISO 12511 Construction and excavation machinery
TS EN 12527 Swivel tongs and wheels - Test methods and apparatus
TS EN 12532 Swivel castors and wheels - Swivel castors and wheels for applications up to 1,1 m / s (4 km / h)
TS EN 12644-1 + A1 Cranes - Operating and testing information section 1: Instructions
TS 12662 Tractor operator - for agricultural work
TS EN 12881-2 + A1 Conveyor belts - Flammability test with fire simulation section 1: Propane combustion test
tst EN 13155 Cranes - Safety - Slings for unsecured loads.
TS EN 13155 + A2 Cranes - Safety - Slings for non-fixed loads.
TS EN 13157 + A1 Cranes - Safety - Manually operated lifting gear
TS 13199 Forged steel locks - for general lifting purposes (d and spring type)
TS ISO 13200 Cranes - Safety signs and hazard signs - General principles
TS ISO 13333 Construction and excavation machinery - Dump truck support and operator cab tilt support devices
TS 13387 Authorized services - Rules for load-bearing belts
TS EN 13411-1 + A1 Terminators for steel wire ropes - Safety - part 1: ferrules for steel wire rope slings
TS EN 13411-2 + A1 Terminators for steel wire ropes - Safety - part 2: Knitted eyes for wire rope slings
TS EN 13411-3 + A1 Terminators for steel wire ropes - Safety - part 3: Clamps and clamp safety
tst EN 13490 Safety of industrial vehicles - Mechanical vibration - Measurement and laboratory evaluation on the operator seat
TS EN 13490 + A1 Mechanical vibration - Industrial trucks - Operator seat vibration characteristics and laboratory evaluation
TS 13506 Businesses - Providing rental of construction equipment - General rules
TS EN 13531 + A1 Construction and excavation machines - Roll-over protection for compact excavators (dkky) - Laboratory tests and performance characteristics
TS EN 14238 + A1 Cranes - Hand-operated load handling devices
TS EN 14439 + A2 Cranes - Safety - Tower cranes
TS EN 14492-1 + A1 / AC Cranes - Cranes and winches with power drives - Part 2: Power driven winches
TS EN 14492-1 + A1 / AC Cranes - Cranes and winches with power drives - Part 2: Power driven winches
TS EN 14492-2 + A1 Cranes - Cranes and winches with power drives - Part 2: Power driven winches
TS EN 14502-1 Cranes - Equipment for person lifting - Part 1: Hanging baskets
TS EN 14502-2 + A1 Cranes - Equipment for lifting people - Part 1: Elevation control stations
TS EN 14658 + A1 Continuous transport equipment and systems - Continuous transport equipment used in open pit lignite mines - General safety
TS EN 15056 + A1 Cranes - Specification for container carrier distributors
TS EN 15095 + A1 Powered mobile storage carousel system, sorting and shelving system and storage lift - Safety rules
TS EN 15056 + A1 Cranes - Specification for container carrier distributors
TS EN 15095 + A1 Powered mobile storage carousel system, sorting and shelving system and storage lift - Safety rules
TS EN 1756-2 + A1 Tail lifts - Platform lifts for wheeled vehicles - Safety regulations - Part 2: Tail lifts for humans
tst EN ISO 284 Conveyor belts - Electrical conductivity - Specification and test method
TS ISO 22986 Cranes - Stiffness - Gantry Cranes
TSE K 114 Rubber elements - used in conveyor systems