Turkey's top quality inspection testing company, has been providing inspection and certification services. It provides test and audit certification services to all of the following standards.

TS EN 678 Gas and foam concrete-Dry density determination 

TS EN 29048 Joint materials used in building construction - Determination of the gushing ability of the sealing material using standardized devices 

TS EN 932-1 Tests for general properties of aggregates-Part 1 sampling methods 

Tests for general properties of aggregates 10088: Process and terminology for simplified petrographic identification 

TS EN 991 Gas concrete or lightweight aggregate porous concrete - Determination of pre-structured components 

TS EN 1521 Determination of tensile strength of bending of lightweight aggregate porous concrete 

TS EN 1351 Determination of tensile strength in bending of aerated concrete 

TS EN 1355 Gas concrete or lightweight aggregate porous concrete - Determination of creep under pressure

TS EN 1170-6 Prefabricated concrete products-Glass fiber reinforced cement (CTT) test method-Part 6: Determination of water absorption and dry density by immersion in water 

TS EN 932-2 Tests for general properties of aggregates part 2: Method of reduction of laboratory samples 

TS EN 772-3 Masonry units - Test methods - Part 3: Determination of net volume and percentage of cavity in water by weighing method 

TS EN 772-4 Masonry units - Test methods - Part 4: Determination of the total and apparent porosity of natural stone masonry units and the volume volume of void and void volume 

TS EN 772-9 Masonry units - Test methods - Part 9: Determination of the void volume and percentage and net volumes of lime sandstone masonry units by sand filling method 

TS EN 933-7 Tests for geometric properties of aggregates - Part 7: Determination of shell content in coarse aggregates - Percentage of shell 

TS EN 1015-2 Masonry mortar - Test methods - Part 2: Sampling from mortar stacks used in manufacturing and preparation for testing 

TS EN 1015-6 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar 

TS EN 1015-19 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar

TS EN 1737 Prefabricated components made of aerated concrete and lightweight aggregate porous concrete - Determination of shear strength at welded joints of mesh and mesh reinforcement 

TS EN 1741 Prefabricated components made of aerated concrete or lightweight aggregate porous concrete - Determination of shear strength against out-of-plane forces in joints between components 

TS EN 538 Roof tiles made of clay discontinuous bending strength test 

TS EN 1015-11 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar

TS EN 1015-9 Masonry mortar - Test methods - Part 9: Determination of the processing and correcting time of fresh mortar 

TS EN 1169 Prefabricated concrete products - General rules for factory production control of glass fiber reinforced cements 

TS EN 1849-1 Flexible sheets for waterproofing - Determination of thickness and unit area mass - Part 1: Bituminous sheets for roof waterproofing 

TS EN 1850-1 Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bituminous sheets for roof waterproofing 

TS EN 1925 Natural stones - Test methods - Determination of water absorption coefficient due to capillary effect 

TS EN 1946-1 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties section 1: General criteria 

TS EN 1946-2 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 2: Enclosed hot plate method 

TS EN 1946-3 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurement using heat flow meter method 

TS EN ISO 10545-2 Ceramic tiles section 2: Determination of size and surface quality 

TS EN ISO 10545-3 Ceramic tiles section 3: Determination of water absorption, apparent porosity, apparent relative density and volume mass 

TS EN ISO 10545-10 Ceramic tiles section 10: Determination of moisture expansion

TS EN 12310-2 Flexible sheets for waterproofing - Determination of tear resistance - Part 2: Plastic and rubber sheets for waterproofing on roofs 

TS EN 12390-4 Concrete - Hardened concrete tests - Part 4: Compressive strength - Characteristics of test machines 

TS EN 1877-1 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 1: Determination of epoxy equivalents 

TS EN 1877-2 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 2: Determination of amine functions using the total number of bases 

TS EN 1946-4 Thermal performance of building materials and components - Specific criteria for the evaluation of laboratories where heat transfer properties are measured - Part 4: Measurements with hot box methods 

TS EN 772-13 Heavy units - Test methods - Part 13: Determination of net and gross dry unit volume masses of masonry units (excluding natural stone) 

TS EN 772-15 Masonry units - Test methods - Part 15: Determination of water vapor permeability in aerated concrete masonry units

TS 5694 EN 12670 Natural stones - Terms and definitions

TS EN 1946-3 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurements by heat flow meter method

TS EN 1844 Flexible sheets for waterproofing - Determination of ozone resistance - Plastic and rubber sheets for waterproofing on roofs 

TS EN 1848-2 Flexible sheets for waterproofing - Determination of length, width and smoothness - Part 2: Plastic and rubber sheets for waterproofing on roofs 

TS EN 1850-2 Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for waterproofing on roofs 

TS EN 495-5 Flexible sheets for waterproofing - Determination of low temperature foldability - Part 5: Plastic and rubber sheets for waterproofing on roofs

TS EN 1107-2 Flexible sheets for waterproofing - Determination of dimension stability - Part 2: Plastic and rubber sheets for waterproofing on roofs

TS EN 1296 Flexible sheets for waterproofing - Bituminous plastic and rubber sheets used in roofs - Artificial aging method by long-term exposure to high temperatures 

TS EN 12606-2 Bitumen and bituminous binders - Determination of paraffin wax content - Part 2: Extraction method

TS EN 772-6 Masonry and masonry products - Part 6: Determination of bending resistance of concrete masonry units 

TS EN 772-14 Masonry units-Test methods-Section 14: Determination of moisture movement of concrete and artificial stone masonry units

TS EN 1744-3 Tests for chemical properties of aggregates 

TS EN 13408 Test methods for setting and fixing of floor surfaces and determination of bond strength 

TS EN 13409 Test methods to be applied to the compounds which can be used in calendering and / or leveling works and can be set in hydraulic setting - Determination of setting time 

TS EN 13470 Thermal insulation products for industrial plants and building equipment - Determination of apparent density of preformed thermal insulation products in tubular form 

TS EN 13579 Concrete structures-Products and systems for protection and repair-Test methods-Drying test for hydrophobic impregnation 

TS EN 13639 Determination of total organic carbon in limestone 

TS EN 13383-1 Protection layer stones section 1: Features 

TS EN ISO 14438 Used in glass structures - Determination of energy balance value - Calculation method 

TS 2717 EN 13139 Aggregates - For mortar construction

TS EN 772-14 Masonry units - Test methods - Part 14: Determination of the moisture movement of concrete and artificial stone masonry units 

TS 7043 EN 13450 Aggregates for railway ballasts 

TS EN 13408 Test methods to be applied to hydraulically setting compounds used in finishing and / or leveling works - Determination of bond strength 

TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment 

TS EN 13409 Test methods to be applied to the compounds which can be used in calendering and / or leveling works and can be set in hydraulic setting - Determination of setting time 

TS EN 13579 Concrete structures - Products and systems for protection and repair - Test methods - Drying test for hydrophobic impregnation 

TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 3: Determination of spreading in repair concrete 

TS EN 13395-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 4: Application of repair mortars used in ceilings

TS EN 13043 Bituminous mixtures and aggregates for surface applications in roads, airports and other open traffic areas 

TS EN 13813 Screed materials and floor screeds - Screed materials - Specifications and requirements 

TS EN 13494 Thermal insulation materials - Used in buildings - Determination of bonding strength of adhesive and floor covering materials to thermal insulation materials by tensile method 

TS EN 13495 Thermal insulation materials - Used in buildings - Externally used composite thermal insulation systems (etıcs) - Determination of breaking resistance perpendicular to the surface by foam block test 

TS EN 13498 Thermal insulation materials - Used in buildings - external composite thermal insulation systems (etıcs) - Determination of sinking resistance

TS EN 13639 Limestone - Determination of total organic carbon 

TS EN 13892-1 Screed materials - Test methods - part 1: Sampling, preparation and curing for experiments 

TS EN 13892-2 Screed materials - Test methods - part 2: Determination of flexural and compressive strength 

TS EN 13892-4 Screed materials - Test methods - part 4: Determination of abrasion resistance of Bca-by Bca method 

TS EN ISO 14438 Glass - Used in buildings - Determination of energy compensation value - Calculation method

TS EN 13383-1 Protection layer stones (armor stone) - Part 1: Specifications 

TS EN 1015-18 Masonry mortar - Test methods - Part 18: Determination of water absorption coefficient of hardened mortar due to capillary effect 

TS EN 1015-21 Masonry mortar - Test methods - Part 21: Determination of the compatibility of coarse plaster mortars made as one layer with the base materials 

TS EN 13043 Aggregates - For surface treatment and bituminous mixtures to be used in roads, airports and other open traffic areas 

TS EN 12600 Glass - Used in buildings - Pendulum test - Impact test and performance characteristics for flat glass 

TS EN 13373 Natural stones-Test methods-Determination of geometric properties of units 

TS EN 13494 Thermal insulation products - Used in buildings - Determination of bonding strength of adhesives and flooring materials to thermal insulation materials by tensile method 

TS EN 13495 Thermal insulation products - Used in buildings - Determination of tensile-Tensile strength of external composite thermal insulation systems (en 13495: 2002) 

TS EN 13497 Thermal insulation products - Used in buildings - Determination of impact strength of external composite thermal insulation systems (en 13497: 2002) 

TS EN 13498 - thermal insulation products - Used in buildings - Determination of penetration resistance of external composite thermal insulation systems (en 13498: 2002) 

TS EN ISO 13787 Thermal insulation products for construction equipment and industrial plants Determination of declared thermal conductivity 

TS EN 13813 Screed materials and floor screeds - Screed materials - Specifications and requirements 

TS EN 13892-1 Screed materials - Test methods - Part 1: Sampling, preparation and curing for experiments 

TS EN 13892-2 Screed materials - Test methods - Part 2: Determination of flexural and compressive strength 

TS EN 13892-4 Screed materials - Test methods - Part 4: Determination of abrasion resistance of Bca 

TS EN 13892-5 Screed materials - Test methods - Part 5: Determination of abrasion resistance of screed material used as wear layer by means of rotary wheel 

TS EN 13892-6 Screed materials - Test methods - Part 6: Determination of surface hardness 

TS EN 13892-7 Screed materials - Test methods - Part 7: Determination of abrasion resistance of screed materials and floor coverings against rotating wheel 

TS EN 13892-8 Screed materials - Test methods - Part 8: Determination of bond strength

TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment 

TS EN ISO 15148 Hygothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion 

TS EN ISO 10426-2 Oil and gas industry - Cements and materials for well cementing - Part 2: Tests of well cements (ISO 10426-2: 2003) 

TS EN 13499 Thermal insulation materials for buildings - Composite systems for external thermal insulation based on expanded polystyrene 

TS EN 13500 Thermal insulation materials - For buildings - Composite systems for external thermal insulation based on glass wool (etıcs) - Specifications 

TS EN 13793 Thermal insulation products for building applications - Determination of behavior under repeated loads 

TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment 

TS 8403 EN ISO 7390 Building construction - Joint materials - Determination of leakage resistance of sealing materials

TS 213-2 EN 13748-2 Terrazo tiles - For outdoor use 

TS EN 13500 Thermal insulation materials - Used in buildings - mineral wool based external composite thermal insulation systems (etıcs) - Features

TS EN 12504-4 Concrete tests - Part 4: Determination of ultrasound transmission rate

TS EN 13454-1 Binders, composite binders and factory made mixtures - Calcium sulphate based - Used as screed material - Part 1: Definitions and required properties 

TS EN 13454-1 Binders, composite binders and factory made mixtures - Calcium sulphate based - Used as screed material - Part 1: Definitions and required properties

TS EN 14016-1 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions and specifications 

TS EN 14016-2 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods 

TS EN 14063-1 Thermal insulation materials and products - On-site castings - Expanded clay lightweight aggregate used - Part 1: Pre-assembly properties of loose-filled products 

TS EN 14117 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the viscosity of cement based injection products

TS EN 13970 Flexible sheets - For waterproofing - Bituminous sheets controlling water vapor transmission - Definitions and features 

TS EN 772-9 / A1 Masonry units - Test methods - Part 9: Determination of the net volume and percentage and net volumes of clay and lime sandstone masonry units by sand filling method 

TS EN 1928 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of waterproofing

TS EN 13970 Flexible sheets - For waterproofing - Bituminous sheets controlling water vapor transmission - Definitions and features 

TS EN 772-9 / A1 Masonry units - Test methods - Part 9: Determination of the net volume and percentage and net volumes of clay and lime sandstone masonry units by sand filling method 

TS EN 1928 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of waterproofing

TS EN 858-1 / A1 Separation systems for light liquids (such as oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control

TS 25 Natural pozzolan - Used in cement and concrete - Definitions, requirements and eligibility criteria

tst 1247 Concrete construction, casting and maintenance rules (under normal weather conditions)  

TS 3323 Concrete - Preparation of pressure test specimens, accelerated spheres and tests

TS EN 13969 Waterproofing flexible covers - Moisture resistant bituminous schists, including those used for storage on the ground floor - Definitions and characteristics

TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt" - Modification ac 

TS EN 13383-1 / AC Protection layer stones (armor stone) - Part 1: Specifications 

TS 7043 EN 13450 / AC Aggregates for railway ballasts

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster 

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster

TS EN 12504-3 Concrete tests in buildings - Part 3: Determination of pulling load

TS EN 14575 Geosynthetic barriers - Determination test method for determination of resistance to oxidation

TS EN 1928 Flexible sheets - For waterproofing - Determination of water resistance 

TS EN 1931 + AC Flexible sheets - For waterproofing - Determination of water vapor transmission properties

TS EN 480-5 Chemical additives - For concrete, mortar and grout - Test methods - Part 5: Determination of capillary water absorption 

TS EN 480-5 Chemical additives - For concrete, mortar and grout - Test methods - Part 5: Determination of capillary water absorption 

TS EN 480-12 Chemical additives - For concrete, mortar and grout - Test methods - part 12: Determination of alkali content 

TS EN 480-12 Chemical additives - For concrete, mortar and grout - Test methods - part 12: Determination of alkali content

TS EN 450-2 Fly ash - For use in concrete - Part 2

TS EN 13450 / AC Aggregates for railway ballasts 

TS EN 13383-1 / AC Protection layer stones (armor stone) - Part 1: Specifications 

TS EN 933-5 / A1 Tests for geometric properties of aggregates - Part 5: Determination of the percentage of crushed and broken surfaces in coarse aggregates

TS EN 1015-19 / A1 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar 

TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt" 

TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt"

TS EN 14845-2 Fibers - For use in concrete - Test methods - Part 2: Effect on concrete

TS EN 14647 / AC Calcium aluminate cement - Composition, properties and conformity criteria 

TS EN 1744-5 Tests for chemical properties of aggregates - Part 5: Determination of acid-soluble chloride salts 

TS EN 1744-6 Tests for chemical properties of aggregates - Part 6: Determination of the effect of recovered aggregate extract on cement setting time 

TS EN 480-14 Chemical additives - For concrete, mortar and grout - Test methods - Part 14: Determination of the effect on the susceptibility of reinforcing steel to corrosion by potentiostatic electrochemical testing 

TS EN 13969 / A1 Waterproofing flexible covers - Moisture resistant bituminous shales, including those used for storage on the ground floor - Definitions and characteristics

TS EN 13969 / A1 Flexible sheets for waterproofing - Bituminous moisture insulating boards, including boards for storage in basements - Descriptions and specifications

TS EN 13970 / A1 Flexible sheets for waterproofing - Bituminous water vapor control layers - description and specifications

TS ISO 8142 Thermal insulation - Glued preformed artificial mineral fiber pipe sections - Specifications 

TS 13353 Boron active belite cement - Definitions, composition, properties and conformity criteria 

TS EN 1015-1 / A1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis) 

TS EN 1936 Natural stones- Test methods- Determination of real density, apparent density, total and open porosity 

TS EN 14991 Precast concrete products - Basic elements 

TS EN 14843 Precast concrete products - Stairs

TS EN 12664 Building materials and products - Determination of thermal resistance by means of protected table heater and heat flux meter - Dry and damp products with medium and low thermal resistance

TS EN 12794 + A1 Precast concrete products - Foundation piles 

TS EN 1367-1 Tests for thermal and degradation properties of aggregates - Part 1: Determination of resistance to freezing and thawing 

TS EN 1739 Prefabricated components made of aerated concrete or porous lightweight concrete - Determination of shear strength against joint forces with joints between components 

TS EN 15323 Bitumen and bituminous binders - Accelerated long-term aging / conditioning-Rotating roller method (RCAT) 

TS EN 15361 Reinforced prefabricated components made of aerated concrete - Determination of the effect of the corrosion protection coating on the anchor capacity of the anchor rods in the transverse direction

TS EN 14246 / AC Gypsum elements - Used in suspended ceilings - Definitions, requirements and test methods

TS EN 445 Sherbet - For pretension reinforcement - Test methods 

TS EN 1548 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Bitumen exposure method

TS EN 12794 + A1 / AC Precast concrete products - Foundation piles 

TS EN 196-7 Cement test methods - Part 7: Sampling and sample preparation methods from cement 

TS EN 12737 + A1 Precast concrete products - Slabs for livestock 

TS EN 13242 + A1 Aggregates for bonded and hydraulic bonded materials used in civil engineering works and road construction 

TS EN 15285 / AC Stacked stones - Modular tiles for floor and stair covering (internal and external) 

TS 706 EN 12620 + A1 Concrete aggregates 

TS EN 13242 + A1 Aggregates for bonded and hydraulic bonded materials used in civil engineering works and road construction 

TS EN 14566 + A1 Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods 

TS EN 196-7 Cement test methods - Part 7: Methods of sampling and preparation of cement 

TS EN 934-1 Chemical additives - For concrete, mortar and grout - Part 1: General requirements 

TS EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 7: Determination of grain density of fill - Picnometer method 

TS EN 1367-6 Tests for thermal and wear properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) 

TS EN 15037-1 Precast concrete products - Gear laying systems - Part 1: Beams 

TS EN 15422 Precast concrete products - Properties of glass fiber reinforcement material used in mortars and concretes

TS EN 14488-4 + A1 Shotcrete - Tests - Part 4: Determination of bond strength in cores by direct tensile strength 

TS EN 13172 Thermal insulation products - Conformity assessment

TS EN 12390-5 Concrete - Hardened concrete tests - Part 5: Determination of flexural strength of test specimens 

TS EN 12350-1 Concrete - Fresh concrete tests - Part 1: Sampling 

TS EN 12350-2 Concrete - Fresh concrete tests - Part 2: Slump test 

TS EN 12350-3 Concrete - Fresh concrete tests - Part 3: Mid-term test 

TS EN 12350-6 Concrete - Fresh concrete tests - Part 6: Density 

TS EN 12350-7 Concrete - Fresh concrete tests - Part 7: Determination of air content - Pressure methods

TS EN 12390-6 Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of splitting test specimens

TS EN 13263-1 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria

TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers 

TSE CEN / TR 15840 Conformity assessment of fly ash used in concrete - Guidelines for the application of EN 450-2

TS EN 12350-1 Concrete - Fresh concrete tests - Part 1: Sampling 

TS EN 12350-2 Concrete - Fresh concrete tests - Part 2: Slump test 

TS EN 12350-3 Concrete - Fresh concrete tests - Part 3: Mid-term test 

TS EN 12350-4 Concrete - Fresh concrete tests - Part 4: Degree of compressibility 

TS EN 12350-5 Concrete - Fresh concrete tests - Part 5: Spreading table test 

TS EN 12350-6 Concrete - Fresh concrete tests - Part 6: Density 

TS EN 12350-7 Concrete - Fresh concrete tests - Part 7: Determination of air content - Pressure method 

TS EN 12390-2 Concrete - Hardened concrete tests - Part 2: Preparation and curing of test specimens to be used in strength tests 

TS EN 12390-3 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens 

TS EN 12390-5 Concrete - Hardened concrete tests - Part 5: Determination of flexural strength in test specimens 

TS EN 12390-7 Concrete - Hardened concrete tests - Part 7: Determination of hardened concrete density 

TS EN 12390-8 Concrete - Hardened concrete tests - Part 8: Determination of depth of water treatment under pressure 

TS EN 12504-1 Concrete - Concrete tests in structure - Part 1: Core samples - Core drilling, inspection and determination of compressive strength 

TS EN 12808-4 Joint fillers - For tiles - Part 4: Determination of shrinkage 

TS EN 12850 Bitumens and Bituminous binders - Determination of ph value of bitumen emulsions

TS EN 480-10 Chemical additives - For concrete, mortar and grout - Test methods - Part 10: Determination of soluble chloride content in water

TS EN 12440 Natural stones - Naming criteria 

TS EN 15824 Exterior and interior plasters - Organic binder - Features 

TS EN 196-6 Cement test methods - Part 6: Determination of fineness

TS EN 14604 / AC Smoke alarm devices 

TS EN 934-4 Chemical additives for concrete, mortar and grout - Part 4: Grout additives for prestressing steel - Definitions, specifications, conformity, marking and labeling 

TS EN 1367-2 Tests for thermal and degradation properties of aggregates part 2: Magnesium sulfate test 

TS EN 12390-6 Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of splitting test specimens

TS EN 14695 Flexible slabs - For waterproofing - Reinforced bitumen slabs for concrete bridge decks and other open traffic areas - Definitions and features

tst EN 13707 + A2 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and features

TS EN 196-8 Cement test methods - Part 8: Heat of hydration - Solution method 

TS EN 196-9 Cement test methods - Part 9: Heat of hydration - Adiabatic method 

TS EN 15304 Aerated concrete - Determination of resistance to freeze-thaw effect

TS EN ISO 10426-1 / AC Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications

TS EN 12350-8 Concrete - Fresh concrete tests - Part 8: Self-compacting concrete - Slump propagation test 

TS EN 12350-9 Concrete - Fresh concrete tests - Part 9: Self-compacting concrete - V funnel test 

TS EN 12350-11 Concrete - Fresh concrete tests - Part 11: Self-compacting concrete - Sieve separation test 

TS EN 12350-12 Concrete - Fresh concrete tests - Part 12: Self compacting concrete - J ring test 

TSE K 108 Asmolen blocks - Made of aerated concrete

TS EN ISO 1716 Fire reaction tests of building products - Determination of combustion temperature (calorific value)

TS EN 14151 Geosynthetics - Determination of explosion strength 

TS EN 12350-8 Fresh concrete tests section 8: Self-compacting concrete- Sinking-Spreading test

TS EN 12350-9 Fresh concrete tests section 9: Self-compacting concrete- Sump-V funnel test 

TS EN 12350-11 Fresh concrete tests section 11: Self-compacting concrete- Sinking-Screening test

tkt 201184265 Wood based interior door frame  

TS EN 15599-1 Thermal insulation products for industrial insulation and building equipment-On-site thermal insulation from expanded perlite (ep) - Part 1: Pre-placement properties of bonded and filled materials 

TS EN 15599-2 Thermal insulation products for industrial and building equipment-On-site thermal insulation from expanded perlite (ep) -Chapter 2: Properties of installed materials 

TS EN 15600-1 Thermal insulation products for industrial insulation and building equipment-Thermal insulation applied at the place of use with scaly vermiculite (pv) products -Part 1: Pre-placement properties of bonded and filled materials

TS EN ISO 8394-2 Building construction-Joint materials-Part 2: Determination of the gushing property of joint sealants using standardized equipment 

TS EN ISO 8394-1 Building construction-Joint materials-Part 1: Determination of the gushing properties of joint sealing materials

TS EN 12059 + A1 Natural stone products - Dimensional stones - Requirements

TS EN 13170 + A1 Thermal insulation products for buildings - Factory made oak cork products (ICB) - Specifications

tst ISO 3934 Vulcanized and thermoplastic tires - Preformed gaskets for construction - Classification, determination and testing methods

TS EN ISO 23993 Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity 

TS EN 15551 + A1 Railway applications-Railway moving materials-Buffers 

TS EN ISO 11925-2 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding 

TS 13508 Estimation of concrete strength by maturity method 

TS EN 1367-5 Tests for thermal and degradation properties of aggregates - Part 5: Determination of resistance to thermal shock

TS EN 14647 Cement - Calcium aluminate - Composition, properties and conformity criteria 

TS EN 14647 / AC Cement - Calcium aluminate - Composition, properties and conformity criteria 

TS EN 12371 Natural stones-Test methods-Determination of frost resistance 

TS 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades 

TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers 

TS EN 12859 Gypsum blocks - Definitions, requirements and test methods 

TS EN 12846-1 Bitumens and bituminous binders-Determination of flow time of bitumen emulsions with flow viscometer-Part 1: Bituminous emulsions 

Safety regulations - For electrical appliances used in domestic and similar areas - Part 60335-2: Particular requirements for roasters, grills and similar portable cooking appliances 

TS EN 16140 Natural stone test methods - Determination of sensitivity to changes in appearance caused by thermal cycles 

TS EN 12808-4: 2009 / AC: 2011 Joint fillers - For tiles - Part 4: Determination of shrinkage 

TS 407 Concrete products - Flooring systems - suspended concrete block 

TS EN 15812 Polymer modified thick bituminous coatings for waterproofing - Determination of crack coverage 

TS EN 15813 Polymer modified thick bituminous coatings for waterproofing - Determination of flexibility at low temperatures 

TS EN 15816 Polymer modified bitumen thick covers for waterproofing - Resistance to rain 

TS EN 15820 Polymer modified bitumen thick covers for waterproofing - Determination of waterproofness 

TS EN 197-1 Cement - Part 1: General cements - Composition, properties and conformity criteria

TS EN 772-11 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, gas concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units 

TS EN 772-11 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, gas concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units

TS EN 544 Bituminous syringes - Mineral and / or synthetic reinforced - Product properties and test methods 

TS EN ISO 11600 / A1 Building construction - Joint materials - Classification and requirements for sealing materials

TS EN 772-16 Heavy units - Test methods - Part 16: Determination of dimensions 

8394-2: Clay geosynthetic barriers - Determination of permeability to gases 

TS EN 772-21: 2011 Masonry units - Test methods - Part 21: Determination of cold water absorption and water absorption of clay and silica sandstone masonry units

TS EN 544 Bituminous syringes - Mineral and / or synthetic reinforced - Product properties and test methods 

TS EN 1858 + A1 Chimneys - Components - Concrete chimney blocks

TS EN 12390-3: 2009 / AC Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens 

TS EN ISO 11600: 2003 / A1 Building construction - Joint materials - Classification and requirements for sealing materials 

TS EN 445 Sherbet - For prestressed tendons - Test methods 

TS EN 446 Grout - for prestressed tendons - Grouting 

TS EN 447 Sherbet - For prestressed tendons - Basic requirements 

TS 13519 Determination of length change in concrete due to alkali silica reaction 

TS 13517 Determination of potential alkali silica reactivity of binder materials and aggregate mixtures (accelerated mortar stick method) 

TS 13516 Determination of potential alkali reactivity of aggregates (mortar stick method) 

TS 13518 Potential alkali reactivity of cement aggregate mixtures (mortar stick method) 

TS EN 491 Concrete roof tiles and fittings for roofing and wall covering - Test methods 

TS EN 197-1 Cement - Part 1: General cements - Composition, properties and conformity criteria

TS EN 12390-3 / AC Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens

TS 1261 Clay products - Flooring systems - Non-static clay block

TS EN 12504-3 Concrete tests in buildings - Part 3: Determination of pulling load 

TS EN 12504-4 Concrete tests - Part 4: Determination of ultrasonic pulsed wave velocity 

TS EN 772-16 Masonry units - Test methods - Part 16: Determination of dimensions 

TSE CEN / TS 772-22 Masonry units - Test methods - Part 22: Determination of freeze-thaw resistance of clay masonry units 

TS EN 772-18 Paper units - Test methods - Part 18: Determination of freeze-thaw resistance in lime sandstone masonry units

TS EN 933-3 Tests for geometric properties of aggregates part 3: Determination of grain shape flatness index 

TS EN 12839 Precast concrete products - Fence elements 

TS EN 14844: 2006 + A2: 2011 Prefabricated concrete products - Box lattices

TSE K 143 Clay masonry units with insulation layer 

TSE K 143 Clay masonry units with insulation layer 

TS 13546 Concrete tests in buildings - Use of electromagnetic concrete thickness gauge 

TS 13537 Test method for determination of sinking resistance of hardened concrete 

TS EN 13172 Thermal insulation products - Conformity assessment 

TS EN 932-5 Tests for general properties of aggregates - Part 5: General instruments and calibration 

TS EN 1744-7 Tests for chemical properties of aggregates - Part 7: Determination of combustion loss of aggregate (MIBA aggregate) in municipal ash incinerator

TS EN 14630 Concrete structures - Products and systems for protection and repair - Test methods - Determination of carbonation depth in hardened concrete by phenolphthalene method 

TS EN 13224: 2011 Precast concrete products - Threaded pavers 

TS EN 1024 Roof tiles made of clay - Determination of non-continuous geometric properties 

TS EN 15050 + A1 Precast concrete products - Bridge elements 

TS EN 58 Bituminous binders - Sampling 

TS EN 1428 Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method

TS 13540 Standard test method for corrosion potential of unprotected reinforcing steel in concrete 

TS EN 1467 Natural stones - Raw blocks - Specifications 

TS EN 1468 Natural stones - unprocessed boards - Specifications 

TS EN 14617-4 Agglomerated stones - Test methods - Part 4: Determination of abrasion resistance 

TS EN 14617-5 Agglomerated stones - Test methods - Part 5: Determination of freezing and melting resistance

TS EN 14617-6 Agglomerated stones - Test methods - Part 6: Determination of resistance to thermal shock 

TS EN 14617-10 Agglomerated stones - Test methods - Part 10: Determination of chemical resistance 

TS EN 14617-12 Agglomerated stones - Test methods - Part 12: Determination of dimensional stability

TSE K 163 Expanded polystyrene (eps) products - Flooring systems - Non-static eps block 

TSE K 154 Thermal insulation board - For buildings - Ceramic foam based 

TSE K 154 Thermal insulation board - For buildings - Ceramic foam based

TS EN 12059: 2008 + A1: 2011 Natural stone products - Sizing of stones - Features

TS EN 15050: 2007 + A1 Precast concrete products - Bridge elements 

TS EN 480-8: 2012 (EN) Chemical additives - Test methods for concrete, mortar and grout - Part 8: Determination of solids content 

TS EN 1425 Bitumen and bituminous binders - Determination of sensory properties 

TS EN ISO 9047 / AC Building construction - Joint materials - Determination of adhesion / cohesion properties of sealing materials at various temperatures

tkt 201187071 Jambs - Facade profiles - Acrylic based

TS EN 14769 Bituminous and bituminous binders - Accelerated long-term aging process with pressurized aging container (pav) 

TS EN 14770 Bitumen and bituminous binders - Complex cutting module and determination of phase angle - Dynamic cutting rheometer (dsr) 

TS EN 14771 Bitumen and bituminous binders - Determination of creep rigidity in bending - Bending beam rheometer (bbr) 

TS 13539 Standard test method for the measurement of concrete layer thickness and p-wave velocity using the Pulse-Echo method

tst prEN 15101-1 Thermal insulation products for buildings - Loose-filled cellulose products on site - Part 1: Specifications for products before installation  

tst prEN 15101-2 Thermal insulation products for buildings - Loose-filled cellulose products on site - Part 2: Specification for finished products after installation

TS EN 13967 Flexible sheets - For waterproofing - Plastic and rubber damp insulation boards, including plastic and rubber sheets for bundling insulation in basements - Definitions and features 

TS EN 13596 Flexible sheets for waterproofing - Insulation of bridge deck concretes and other concrete surfaces open to traffic - Determination of bond strength 

TSE CEN / TR 15840 Conformity assessment of fly ash used in concrete - Guidelines for the application of EN 450-2 

TS EN 1024 Roof tiles - Made of clay - Discontinuous (overlap) - Determination of geometric properties 

TSE K 175 Mineral and acrylic based composite systems - used for thermal insulation 

TS 13565 Insulated laminated sandwich lightweight units 

TS 13566 Cement-based adhesives - for thermal insulation board 

TS 407 / T1 Concrete products - Flooring systems - Asmolene lightweight concrete block that does not participate in static work 

TS 3440 Evaluation of water, soils and gases with harmful effects to concrete - Principles, limit values, sampling and analysis of water and soils 

TS 2518 Test method for determination of Portland cement dosage in hardened concrete 

TS 3262 Test method for the determination of abrasion resistance in concrete by sandblasting

TS 3455 Determination of permeability coefficient in concrete

tst 201391339 Concrete inspection application guide  

TS 13567 Application guide for visual inspection of concrete in construction

TS 1261 / T1 Clay products - Flooring systems - Non-static clay block 

TS EN 1015-6 / A1 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar 

TS 13586 Strength evaluation of existing reinforced concrete buildings 

TS EN 1015-9 / A1 Masonry mortar - Test methods - Part 9: Determination of the processing and correction time of fresh mortar 

TS EN 1015-10 / A1 Masonry mortar - Test methods - Part 10: Determination of the hollow dry unit volume of hardened mortar 

TS EN 1015-11 / A1 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar

TS EN 1015-19 / A1 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar 

TS EN 12372 Natural stones - Test methods - Determination of bending strength under heavy loads 

TS EN 1926 Natural stones - Test methods - Determination of uniaxial compressive strength 

TS EN 12407 Natural stones - Test methods - Petrographical investigation 

TS EN 12808-3 Joint fillers - For tiles - Part 3: Determination of flexural and compressive strength 

TS EN 12808-2 Joint fillers - For tiles - Part 2: Determination of abrasion resistance 

TS EN 12808-4 Joint fillers - For tiles - Part 4: Determination of shrinkage 

TS EN 12808-5 Joint fillers - For tiles - Part 5: Determination of water absorption 

TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements 

TS 202 / T1 Ceramic tiles - Tiles 

TS 13619 Guide for pre-repair evaluation of reinforced concrete structures 

TS 13607 Loading tests of concrete structures-methods, test load size, test procedures and acceptance criteria 

TS EN 1015-18 Masonry mortar - Test methods - Part 18: Determination of water absorption coefficient of hardened mortar due to capillary effect 

TS EN 14706 Thermal insulation products for building equipment and industrial installations - Determination of the maximum service temperature 

TS EN 14707 Thermal insulation products for building equipment and industrial installations - Determination of the maximum service temperature for pre-formed pipe insulation

TS EN 13469 Thermal insulation products - For building equipment and industrial plants - Determination of water vapor permeability properties of preformed pipe insulation products 

TS EN 13472 Thermal insulation products - For building equipment and industrial plants - Determination of short-term water absorption by partial immersion of pre-formed pipe insulation products 

TS EN 15732 Lightweight filler and thermal insulation products - For civil engineering structures - Expanded clay lightweight aggregate products 

TS EN ISO 10545-16 Ceramic tiles - Part 16: Determination of small color differences 

TS EN ISO 10545-6 Ceramic tiles section 6: Determination of deep wear resistance in unglazed tiles

TS EN 933-1: 2012 (EN) Tests for geometric properties of aggregates part 1: Determination of particle size distribution - Screening method 

TS EN 1168 + A3 Precast concrete products - Hollow slabs 

TS EN 14909 Flexible sheets for waterproofing - Plastic and rubber waterproofing sheets - Definitions and features 

TS EN 450-1 Fly ash - Used in concrete - Part 1: Description, specifications and conformity criteria

TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling 

TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling

tst 201391944 Guideline for non-destructive testing methods applied near the surface and used to assess concrete strength  

TS 13610 Test method for determining the first superficial water absorption of concrete 

TS 13632 Test method for measuring the dynamic modulus of elasticity 

TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling

TS EN 1467 Natural stones - Raw blocks - Specifications 

TS EN 1468 Natural stones - Untreated plates - Specifications

TS EN 14618 Agglomerate stones - Terms and classification 

TS EN 15388 Agglomerated stones - Plates and dimensional products for bathroom and kitchen worktops 

TS EN 14617-1 Agglomerated stones - Test methods - Part 1: Determination of apparent density and water absorption 

TS EN 13583 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to impact impact of solid grains

TS EN 12390-1 Concrete - Hardened concrete tests - Part 1: Shape, size and other properties of test specimens and molds 

TS EN 12504-2 Concrete tests in buildings - Part 2: Non-destructive testing - Determination of the number of bounces 

TS EN 1744-1: Tests for chemical properties of aggregates - Part 2009: Chemical analysis 

TS EN 1013-2 Plastic profile sheets - Transmissible - For single-layer roof coverings - Part 2: Properties and test methods of fiberglass reinforced polyester resin (ctp) sheets  

TS EN 16345 Bitumen and bituminous binders - Bituminous emulsions - Determination of flow time - Redwood no. II Using Viscometer 

TS EN 13161 Natural stones - Test methods - Determination of bending strength under constant moments 

TS EN 13971 Carbonated calcification agents - Determination of reactivity - Potentiometric titration method with hydrochloric acid 

TS EN 13755 Natural stones - Test methods - Determination of water absorption at atmospheric pressure 

TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor wear 

TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression 

TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus 

TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient 

TS EN 14146 Natural stones - Test methods - Determination of dynamic elasticity modulus (by measuring basic resonance frequency) 

TS EN 13225 Precast concrete products - Structural bar elements 

TS EN 13369 Precast concrete products - General rules 

TSE CEN / EN 16443: 2013 EN 450-1: 2005 + A1 revision history: 2007 - Fly ash for concrete 

TS EN 1013-2 Plastic profile sheets - Transmissible - For single-layer roof coverings - Part 2: Properties and test methods of fiberglass reinforced polyester resin (ctp) sheets

TS EN 14315-1 Thermal insulation products - For buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam spray products prepared on site - Part 1: Particularly for rigid foam spraying system prior to application 

TS EN 14318-1 Thermal insulation products for buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam distributed on site - Part 1 Before application Specification for rigid foam dispensing system 

TS EN 14318-2 Thermal insulation products for buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products distributed on site: Part 2 Specification for applied insulation products 

TS EN 14319-1 Thermal insulation products for building equipment and industrial applications - Rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 1 Characteristics of rigid foam distribution system before application 

TS EN 14319-2 Thermal insulation products for building equipment and industrial applications - Hard polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 2 Properties of applied insulation products 

TS EN 14320-1 Thermal insulation products for building equipment and industrial applications - Rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 1 Characteristics of rigid foam distribution system before application 

TS EN 14320-2 Thermal insulation products for building equipment and industrial applications - Hard polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 2 Properties of applied insulation products

TS EN 13984 Flexible sheets - For waterproofing - Plastic and rubber sheets for water vapor control - Definitions and features 

TS EN 1603 Thermal insulation materials for buildings - Determination of dimensional stability under constant normal laboratory conditions (23 c /% 50 relative humidity) 

TS EN 1608 Thermal insulation materials - For buildings - Determination of tensile strength parallel to surfaces 

TS EN 1609 Thermal insulation materials - For buildings - Determination of short-term water absorption by partial immersion 

TS EN 12085 Thermal insulation materials for buildings - Determination of linear dimensions of test specimens 

TS EN 12086 Thermal insulation materials - Thermal insulation materials - For buildings - Determination of water vapor permeability 

TS EN 12087 Thermal insulation materials for buildings - Determination of long term water absorption by immersion 

TS EN 12088 Thermal insulation materials for buildings - Determination of water absorption due to long-term diffusion by immersion 

TS EN 12089 Thermal insulation materials for buildings - Determination of bending behavior 

TS EN 12430 Thermal insulation materials for building applications - Determination of behavior under point load 

TS EN 12431 Thermal insulation materials for buildings - Determination of thickness for suspended ceiling materials 

TS EN 1109 Flexible sheets - For waterproofing - Bituminous sheets for roof waterproofing - Determination of flexibility at low temperature

TS EN 14157 Natural stones - Determination of wear resistance 

TS EN 14158 Natural stones - Test methods - Determination of breaking energy 

tst EN 14205 Natural stones - Test methods - Determination of knoop hardness  

TS EN 16140 Natural stones - Test methods - Determination of sensitivity to changes in appearance caused by thermal cycles

TS EN 933-9 + A1 Tests for geometric properties of aggregates - Part 9: Determination of fine grains - Methylene blue test 

TS EN 1097-1 Tests for mechanical and physical properties of aggregates - Part 1: Determination of abrasion resistance (micro-Deval) 

TS EN 1097-2 Tests for mechanical and physical properties of aggregates - Part 2: Methods for determination of fragmentation resistance 

TS EN 1097-5 Tests for mechanical and physical properties of aggregates - Part 5: Determination of water content by drying in air circulation oven 

tst EN 15551 + A1 Railway applications - Railway moving materials - Bumpers  

TS EN 934-5 Chemical additives - For concrete, mortar and grout - Part 5: Shotcrete admixtures - Definitions, requirements, conformity, marking and labeling

TS EN 12808-1 Joint fillers - For tiles - Part 1: Determination of the chemical resistance of reaction resin mortars 

TS 3454 Concrete - Hardened concrete tests - Determination of creep under pressure 

TS 11052 Cement test methods - Determination of expansion - Autoclave method 

TS 10966 Liquid curing materials - Membrane forming - Applied to concrete surface - Specifications 

TS 10967 Concrete tests-Curing agents applied on concrete surface-Determination of water retention 

TS 10514 Mixing ratios and rules for the production of fiber-reinforced concrete 

TS 10515 Reinforced Concrete-Steel wire-Bending strength test method  

tst 3234 Bimsbeton construction rules, mixture calculation and test methods  

TS 2511 Mixture calculation principles of lightweight concrete 

TS 4106 Determination of water release percentage in fresh concrete  

TS EN 13361 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams

TS EN 12839 Precast concrete products - Fence elements 

TS EN 12620 Concrete aggregates

tst EN 12620 Concrete aggregates

tst EN 13043 Bituminous mixtures and aggregates for surface applications in roads, airports and other open traffic areas

tst EN 13139 Aggregates - For mortar making

tst EN 13242 Aggregates for non-binding and hydraulic bonding materials for civil engineering works and road construction  

TS EN 15037-4: 2010 + A1 Precast concrete products - Gear laying systems - part 4: Expanded polystyrene (eps) blocks 

TS EN 15037-4: 2010 + A1 Precast concrete products - Gear laying systems - Part 4: Expanded polystyrene (EPS) blocks 

TS EN 15037-5 Precast concrete products - Gear laying systems - part 5: Lightweight blocks for simple formwork

tst EN 16236 Aggregate conformity assessment - Initial Type Testing and Factory Production Control  

TS EN 196-2 Cement test methods - Part 2: Chemical analysis of cement 

TS EN 196-2 Cement test methods - Part 2: Chemical analysis of cement

TS EN 1097-6 Tests for mechanical and physical properties of aggregates part 6: Determination of grain density and water absorption rate 

TS EN 1097-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and limited compressive strength of lightweight aggregates 

TS EN 13383-2 Protection layer stones (armor stone) - Part 2: Test methods

TS EN 15322 Bitumen and bituminous binders - for the identification of katbek and thinned bituminous binders - General principles 

TS EN 1429 Bitumen and bituminous binders - Determination of sieving residue in bitumen emulsions and determination of storage stability by sieving process 

TS EN 13808 Bitumen and bituminous binders - General principles for the identification of cationic bitumen emulsions

TS EN 933-2 Tests for geometric properties of aggregates part 2: Determination of particle size distribution-Test sieves, screen sizes 

TS EN 15286 Agglomerated stones - Slabs and tiles for wall coverings (external and internal) 

TS 13543 Non-destructive testing (NDT) methods for reinforced concrete structures 

TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications

TS EN ISO 12571 Hygothermal performance of building materials and products - hygroscopic sorption properties 

TSE CEN / TR 16563 Principles of equivalent durability procedure 

TSE CEN / TR 16496 Construction Products - Assessment of the release of hazardous substances - Use of harmonized horizontal assessment methods 

TSE CEN / TS 16516 Construction products - Assessment of the release of hazardous substances - Determination of indoor air emissions

TS EN 15101-1 Thermal insulation products for buildings - Loose-filled cellulose products formed on site - Part 1: Specifications for products before installation 

TS EN 15101-2 Thermal insulation products for buildings - Loose-filled cellulose products on site - Part 2: Specification for products after installation 

TS EN 12390-13 Hardened Concrete Tests - Part 13: Determination of modulus of elasticity under pressure 

TSE CEN / TR 16625 Flexible sheets for waterproofing - manufacturer's limit value Statistical definition of declaration and declaration value (MLV and MDV) -% 95 statistic 

TS 13565 / T1 Sandwich lightweight masonry units with insulation layer 

tst 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades  

TS 105 Bitumen used as roofing material 

TS EN 12086 Thermal insulation products - For buildings - Determination of water vapor transmission properties 

TS EN 14496 Gypsum based adhesives - For composite sheets and gypsum sheets for thermal / sound insulation - Definitions, requirements and test methods 

TS EN 13820 Thermal insulation materials - For buildings - Determination of organic content 

TS EN 826 Thermal insulation products - For buildings - Determination of pressure behavior 

TS EN 15824 Exterior and interior plasters - Organic binder - Features 

TS EN ISO 1182 Response of building products to fire tests - Flammability test (ISO 1182: 2010) 

TS EN 680 Aerated concrete - Determination of drying shrinkage 

TS EN 12390-1 Concrete - Hardened concrete tests - Part 1: Shape, size and other properties of test specimens and molds

TS EN 1015-21 Masonry mortar - Test methods - Part 21: Determination of the compatibility of the coarse plaster mortars applied as a single layer with the base materials

tst 201496182 Asbestos removal and disposal methods

TS EN 13496 Thermal insulation materials - Used in buildings - Determination of mechanical properties of glass fiber based reinforcing nets for exterior thermal insulation systems 

TS EN 14509 Self-supporting double surface metal cladding insulating panels - Factory manufactured - Features

TS EN 13823 + A1 Fire reaction tests for construction products - Construction products other than floors exposed to thermal effects with a single combustion element 

TS EN 16416 Geosynthetic clay barriers-Determination of water flow index-Constant level flexible wall permeameter method 

TS EN 14618 Agglomerate stones - Terms and classification 

TSE CEN / TR 16369 Use of control charts in concrete manufacturing 

TSE CEN / TR 16349 Specification framework to avoid harmful Alkaline-Silica Reaction (ASR) in concrete 

TS EN ISO 6927 Structures and civil engineering works - Joint sealing materials - Glossary 

TS EN 14315-1 Thermal insulation products - For buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam spray products prepared on site - Part 1: Specifications for rigid foam spraying system before application 

TS EN 13362 Geosynthetic barriers - Characteristics required for use in duct construction 

TS EN 13362 Geosynthetic barriers - Characteristics required for use in the construction of ducts 

TS EN 13491 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and related underground structures 

TS EN 13491 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and related underground structures 

TS EN 13493 Geosynthetic barriers - Characteristics required for use in solid waste storage and disposal sites 

TS EN 13493 Geosynthetic barriers - Characteristics required for use in solid waste storage and disposal sites 

TS EN 15285 Agglomerate stones - Modular tiles for indoor and outdoor cladding (indoor and outdoor) 

TS EN 15285 / AC Agglomerated stones - Modular tiles for floor and stair covering (internal and external) 

TS 13515 Complementary standard for the implementation of TS EN 206 

TS EN 197-2 Cement- Part 2: Conformity assessment 

TS EN 13279-2 Gypsum binders and building gypsum - Part 2: Test methods 

TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test 

TS EN 13395-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 1: Spatial determination of thixotropic mortars

TS EN 450-1 Fly Ash - Used in concrete - Part 1: Description, specifications and conformity criteria 

TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria 

TS EN 15167-2 Ground blast furnace slag - For use in concrete, mortar and grout - Part 2: Conformity assessment 

TS EN 12504-2 Concrete tests in buildings - Part 2: Non-destructive testing - Determination of the number of bounces 

TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling 

TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling 

TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling 

TS EN 13492 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary depots 

TS EN 13924-2 Bitumen and bituminous binders - Specification frame for special coating bitumen - Multi-quality flooring bitumen 

TS 13655 Masonry units - Specifications - Foam concrete masonry units 

TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test 

TSE K 236 Metal frame components used in cementitious particleboard systems - Definitions, requirements and test methods 

TS EN 13361 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams

TSE CEN / TR 16639 k-value concept, equivalent concrete performance concept and use of equivalent performance concepts of combinations 

TS 13685 On-site determination of compressive strength in structures and precast concrete components - Complementary standard for the application of TS EN13791 

TS 13653 Test methods for the determination of in situ density of fresh and hardened concrete, including roller compacted concrete (RCC) by nuclear method 

TSE K 269 Surface coating impregnated with elastomeric liquid plastic insulation material to polyester, polyamide or similar synthetic carrier fibers

TS 21 Cement - White portland cement - Composition, properties and conformity criteria 

TS 1769 Sorel Cement (MgO-based binder) Intermediate 

TS EN 14617-4 Agglomerated stones - Test methods - Part 4: Determination of abrasion resistance 

TS EN 14617-5 Agglomerated stones - Test methods - Part 5: Determination of freezing and melting resistance 

TS EN 14617-6 Agglomerated stones - Test methods - Part 6: Determination of thermal shock resistance 

TS EN 14617-8 Agglomerated stones - Test methods - Part 8: Determination of resistance to fixation (with dowels) 

TS EN 14617-9 Agglomerated stones - Test methods - Part 9: Determination of impact resistance 

TSE K 308 Organic or inorganic binder coatings applied indoors 

TS EN 14617-10 Agglomerated stones - Test methods - Part 10: Determination of chemical resistance 

TS EN 14617-11 Agglomerated stones - Test methods - Part 11: Determination of the coefficient of linear thermal expansion 

Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for roasters, grills and similar portable cooking appliances 

TS EN 14617-12 Agglomerated stones - Test methods - Part 12: Determination of dimensional stability 

TS EN 14617-13 Agglomerated stones - Test methods - Part 13: Determination of electrical resistivity 

TS EN 1097-4 Tests for mechanical and physical properties of aggregates - Part 4: Determination of voids of dry compacted filling material 

TS EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 7: Determination of grain density of filler material - Pycnometer method 

TS EN 14617-15 Agglomerated stones - Test methods - Part 15: Determination of compressive strength 

TS EN 14617-16 Agglomerated stones - Test methods - Part 16: Determination of dimensions, geometric properties and surface quality of modular tiles 

TS EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of stone polishing value 

TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test 

TS EN 932-5 Tests for general properties of aggregates - Part 5 - General devices and calibration 

TS EN 1097-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and limited compressive strength of lightweight aggregates 

TS EN 933-1 Tests for geometric properties of aggregates - Part 1: Determination of particle size distribution - Screening method 

TS EN 1097-6 Tests for mechanical and physical properties of aggregates - Part 6: Determination of grain density and water absorption rate 

tst EN 13383-2 Protection layer stones - Section 2: Test methods  

TS EN 933-3 Tests for geometric properties of aggregates - Part 3: Determination of grain shape - Flatness index 

TS EN 933-4 Tests for geometric properties of aggregates - Part 4: Determination of grain shape - Shape index

tst EN 933-9 + A1 * Tests for geometric properties of aggregates - Part 9: Evaluation of fine material - Methylene blue test  

TS EN 933-10 Tests for geometric properties of aggregates - Part 10: Determination of fine material - Classification of fine filling materials by particle size (air jet sieving) 

TS EN 933-11 Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components 

TS EN 933-11: Tests for geometric properties of aggregates 2010 / AC - Part 11: Classification test for recovered coarse aggregate components 

TS EN 1367-4 Tests for thermal and decomposition properties of aggregates - Part 4: Determination of drying shrinkage 

TS EN 1367-5 Tests for thermal and decomposition properties of aggregates - Part 5: Determination of thermal shock resistance 

TS EN 1367-6 Tests for thermal and decomposition properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) 

TS EN 1744-1 + A1 Tests for chemical properties of aggregates - Part 1: Chemical analysis 

TS EN 1744-7 Tests for chemical properties of aggregates - Part 7: Determination of combustion loss of aggregate (MIBA aggregate) in municipal ash incinerator 

EN 771-3:2011+A1:2015 -  

TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability 

TS EN 14487-2 Shotcrete - Part 2: Application 

TS EN 14488-1 Shotcrete - Tests - Sampling from fresh and hardened concrete 

TS EN 933-9 + A1: Tests for the geometric properties of aggregates - Part 2013: Determination of fine material - Methylene blue test 

TS EN 933-6 Tests for geometric properties of aggregates - Part 6: Determination of surface characteristics - Determination of flow coefficient in aggregates 

TS EN 1367-7 Tests for thermal and wear properties of aggregates - Part 7: Determination of resistance of lightweight aggregates to freezing and thawing 

TS EN 1367-8 Tests for thermal and wear properties of aggregates - Part 8: Determination of the resistance of lightweight aggregates to disintegration 

TS EN 932-5 / AC Tests for general properties of aggregates - Part 5: General devices and calibration 

TS EN 1097-10 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water absorption height 

TSE CEN / TR 16632 Cement - Concentration calorimetry (ICC) at constant temperature for the determination of heat of hydration - New developments report and Recommendations 

TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods 

TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods 

TS EN 13963 Joint materials - For gypsum boards - Definitions, requirements and test methods

TS EN 14190 Gypsum board products - Recycled material - Definitions, requirements and test methods 

TSE CEN / TS 16637-1 Construction products - Evaluation of the release of hazardous substances - Part 1: Extraction tests and guidance for the determination of additional test steps 

TSE CEN / TS 16637-2 Construction products - Assessment of hazardous substance release - Part 2: Horizontal dynamic surface extraction test 

TS EN 12878 Pigments for the coloring of cement and / or lime based construction materials - Properties and test methods 

TS EN 16566 Paints and varnishes - Sealants for interior and / or exterior work - Sealants for compliance with European standards 

TS EN 14488-2 Shotcrete - Tests - Part 2: Compressive strength of new (young) shotcrete 

TS EN 13859-1 Flexible sheets - For waterproofing - Definitions and characteristics of substrates - Part 1: Used as substrate for discontinuous roofing sheets 

TS EN 13859-2 Flexible sheets - For waterproofing - Definitions and characteristics of substrates - Part 2: Used as substrate for walls 

TSE CEN / TS 15963 Bitumen and bituminous binders - Determination of fracture strength temperature by three point bending test on notched sample 

TS EN 12597 Bitumen and bituminous binders - Terms and definitions 

TS EN ISO 10545-8 Ceramic tiles - Part 8: Determination of linear thermal expansion 

TS EN ISO 10545-4 Ceramic tiles - Part 4: Determination of the breaking and breaking strength module (ISO 10545-4: 2014) 

TS EN 12326-1 Slate and stone products for discontinuous roofing and siding - Part 1: Specification for slate and carbonated slate 

TSE CEN / TS 15548-1 Thermal insulation products for building equipment and installations in industrial plants - Determination of thermal resistance by protected hot plate method Section 1: Measurements at elevated temperatures from 100 ° C to 850 ° C 

TS EN 14488-5 Shotcrete - Tests - Part 5: Determination of energy absorption capacity in fiber-reinforced plate samples 

TS EN 933-6 Tests for geometric properties of aggregates - Part 6: Determination of surface characteristics - Determination of flow coefficient of aggregates 

TS EN 1367-7 Tests for thermal and wear properties of aggregates - Part 7: Determination of resistance of lightweight aggregates to freezing and thawing 

TS EN 1097-10 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water absorption height 

TS EN 1367-8 Tests for thermal and wear properties of aggregates - Part 8: Determination of the resistance of lightweight aggregates to disintegration

TS 699 / T1 Natural building blocks - Examination and laboratory test methods 

TS 699 / T1 Natural building blocks - Examination and laboratory test methods

TSE CEN / TR 16632 Determination of heat of hydration of cement by isothermal conduction calorimeter (ICC): Reports and recommendations on recent developments 

TS EN 14488-6 Shotcrete - Tests - Part 6: Thickness of concrete on substrate 

TS EN 14488-7 Shotcrete - Tests: Part 7: Fiber content of fiber reinforced concrete 

TSE CEN / TS 15324 Bitumen and bituminous binders - Determination of the co-viscosity temperature on the basis of low shear viscosity using dynamic shear rheometer in low frequency vibration mode 

TSE K 314 Foam concrete on-site casting, non-bearing wall elements - for buildings 

TS EN 14488-3 Shotcrete - Tests - Part 3: Flexural strength of fiber reinforced beam specimens (Initial cracking, final and residual bending strengths) 

TS EN 14488-4 + A1 Shotcrete - Tests - Part 4: Determination of bond strength in cores by direct tensile strength 

TS EN 14889-1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and suitability 

TSE CEN / TR 14245 Cement - EN 197-2 Guidance for conducting conformity assessment 

TS EN 480-1 Chemical additives - For concrete, mortar and grout - Test methods - Part 1: Test concrete and test mortar for tests 

TS EN 480-1 Chemical additives - For concrete, mortar and grout - Test methods - Part 1: Test concrete and test mortar for tests 

TS EN ISO 10545-1 Ceramic tiles - Sampling and acceptance principles 

TS EN 13279-2 Building gypsum and plaster - Part 2: Test methods 

TSE CEN / TS 16516 Construction products - Evaluation of the release of hazardous substances - Determination of the release of hazardous substances into the indoor air 

EN 12592: 2014 Bitumen and bituminous binders - Determination of solubility  

EN 12596: 2014 Bitumens and bituminous binders-Kinematic viscosity determination -Vacuum capillary method  

EN 12595: 2014 Bitumen and bituminous binders-Kinematic viscosity determination

TS EN 14889-2 Fibers - For use in concrete - Part 2: Polymer fibers - Definitions, specifications and compatibility 

TS EN 14651 + A1 Metal fiber concrete - Test method - Determination of tensile strength at bending (LOP) 

TS EN 14845-2 Fibers - For use in concrete - Test methods - Part 2: Effect on concrete 

TS EN 14845-1 Fibers - For use in concrete - Test methods - Part 1: Blank concretes 

TS EN 14844: 2006 + A2 Precast concrete products - Box lattices 

TS EN 197-2 Cement - Part 2: Conformity assessment 

TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods 

TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods

TS EN 12859 Gypsum blocks - Definitions, requirements and test methods 

TS EN 13963 Joint materials - For gypsum boards - Definitions, requirements and test methods 

TS EN 14190 Gypsum boards - Recycled - Recipes, requirements and test methods 

TS EN 12390-13 Hardened Concrete Tests - Part 13: Determination of secant modulus of elasticity under pressure 

TS EN 932-5 / AC Tests for general properties of aggregates - Part 5: General instruments and calibration 

TS EN ISO 12571 Hygothermal performance of building materials and products - Determination of hygroscopic water absorption properties (ISO 12571: 2013)

TS EN 534 + A1 Bituminous sheets - Corrugated - Product properties and test methods 

TS EN 14509 Self-supporting double-surface metal-coated insulating panels - Factory manufactured - Features 

TS EN 15101-1 Thermal insulation products for buildings - Loose-filled cellulose (LFCI) products on site - Part 1: Specification for pre-installation products 

TS EN 15101-2 Thermal insulation products for buildings - Loose-filled cellulose (LFCI) products on site - Part 2: Specification for installed products 

TS EN ISO 10545-8 Ceramic tiles - Part 8: Determination of linear thermal expansion 

TS EN 12087 Thermal insulation materials for buildings - Determination of long term water absorption by immersion 

TS EN 1849-2 Flexible sheets for waterproofing - Determination of thickness and unit area mass - Part 2: Plastic and rubber sheets 

TS EN 13859-1 Flexible sheets - For waterproofing - Descriptions and characteristics of substrates - Part 1: Substrates for discontinuous roofing 

TS EN 13859-2 Flexible sheets - For waterproofing - Definitions and characteristics of substrates - Part 2: Substrates for walls 

TS EN 13956 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics 

TS EN 13967 Flexible sheets - For waterproofing - Plastic and rubber damp insulation boards, including plastic and rubber sheets for bundling insulation in basements - Definitions and characteristics 

tst 201498522 Prefabricated reinforced foam concrete building elements  

TS EN 14353 + A1 Metal bearings and connection profiles - Used in combination with gypsum boards - Definitions, requirements and test methods 

TSE CEN / TR 16349 Frame specification to prevent damage from alkali-silica reaction (ASR) in concrete 

TSE CEN / TR 16369 Use of control charts in concrete manufacturing  

TSE CEN / TR 16563 Principles of equivalent durability processes 

TSE CEN / TS 16637-1 Construction products - Assessment of hazardous substance release - Part 1: Guidance for surface extraction tests and determination of additional test steps 

TSE CEN / TS 16637-2 Construction products - Evaluation of the release of hazardous substances - Part 2: Horizontal dynamic surface extraction test 

TSE CEN / TR 16639 k-value concept, equivalent concrete performance concept and use of equivalent performance concepts of combinations 

TS EN 13225 Precast concrete products - Structural bar elements 

TS EN 13369 Precast concrete products - General rules 

TS EN 13747 + A2 Precast concrete products - Slab plates for laying systems 

TS 13272 Standard application for sampling of materials according to probability principle  

TSE K 325 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings 

TS EN ISO 1716 Fire reaction tests of building products - Determination of gross combustion temperature (calorific value) (ISO 1716: 2010) 

TS 802 Concrete mix design calculation principles 

TSE CEN / TS 15963 Bitumen and bituminous binders - Determination of fracture strength temperature by three point bending test on notched sample 

TS EN 1109 Flexible sheets - For waterproofing - Bituminous sheets for roofs - Determination of low temperature flexibility 

TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications 

TS EN ISO 10426-1 / AC Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications - Technical correction 1 

TS EN ISO 10545-4 Ceramic tiles - Part 4: Determination of breaking module and fracture strength (ISO 10545-4: 2014) 

TS EN 12326-1 Slate and stone products for discontinuous roofing and siding - Part 1: Specification for slate and carbonated slate 

TS EN 14303 Thermal insulation products for building equipment and installations in industrial plants - Factory made mineral wool (MW) products - Specifications 

TS EN 14313 Thermal insulation products for building equipment and installations in industrial plants - Factory made polyethylene foam (PEF) products - Specifications 

TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods 

TS EN 13892-3 Screed materials - Test methods - Part 3: Determination of wear resistance - Böhme 

TS EN 13823: 2010 + A1: 2014 Fire reaction tests for construction products - Thermal products with a single combustion element - Construction products other than slabs 

TS EN 12089 Thermal insulation materials for buildings - Determination of bending behavior 

TSE CEN / TS 15548-1 Thermal insulation products for building equipment and installations in industrial plants - Determination of thermal resistance by protected hot plate method Section 1: Measurements at elevated temperatures from 100 ° C to 850 ° C 

TS EN 12310-2 Flexible sheets for waterproofing - Determination of tear resistance - Part 2: Plastic and rubber sheets for waterproofing on roofs 

TS EN 12311-2 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for waterproofing on roofs 

TS EN 15258 Precast concrete products - Retaining wall elements 

TS 13652 Spacers and support elements - For use in reinforced steel reinforcement - Features and performance requirements

TS 13652 Spacers and support elements - For use in reinforced steel reinforcement - Features and performance requirements 

TS EN 15304 Determination of freeze-thaw resistance of aerated concrete 

tkt 201497679 Epoxy Resin Based Polymer Bonded Glass Fiber Reinforced Reinforcement Bar  

TSE CEN / CLC Guide Guidance for users' access to harmonized European Standards, Eurocodes and National Annexes covered by the 28 Construction Products Regulation ” 

TS EN 13496 Thermal insulation products for building applications - Determination of mechanical properties of glass fiber mats used as reinforcement in composite exterior thermal insulation systems with plaster 

TS EN 13224 Precast concrete products - Threaded pavers 

TS EN 1168 + A3 Precast concrete products - Hollow slabs 

TS EN 15191 Precast concrete products - Classification of glass fiber reinforced concrete performance 

TS EN 15422 Precast concrete products - Properties of glass fiber reinforcement material used in mortars and concretes 

TS EN 13162 + A1 Thermal insulation products for buildings - Fabricated mineral wool (MW) - Specifications

TS EN 13164 + A1 Thermal insulation products - For buildings - Fabricated products with extruded polystyrene foam (XPS) - Specifications

TS EN 13167 + A1 Thermal insulation products - For buildings - Fabricated products with cellular glass (CG) - Specifications 

TS EN 13168 + A1 Thermal insulation products - For buildings - Fabricated products with planer chip (WW) - Specifications 

TS EN 13171 + A1 Thermal insulation products for buildings - Wood fiber (WF) fabricated products - Specifications 

TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and features 

TS EN 13707 + A2 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications  

TS EN 15435 Precast concrete products - Normal and lightweight concrete curtain blocks - Product characteristics and performance 

TSE K 367 Glass fiber reinforced polymer composite bars for concrete reinforcement 

TSE K 471 Mold gypsum used in ceramic industry-Features and test methods 

TSE K 274 Precast concrete sleeper - for low voltage, medium voltage and high voltage lines - Definitions, requirements and test methods 

TS EN 12597 Bitumen and bituminous binders - Terms and definitions 

TS EN 12596 Bitumen and bituminous binders - Determination of kinematic viscosity - Vacuum capillary extraction method

TS EN 12311-2 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof sealing 

TS EN 12592 Bitumen and bituminous binders - Determination of solubility 

TS EN 12594 Bitumen and bituminous binders - Preparation of test specimens 

TS EN 12595 Bitumen and bituminous binders - Determination of kinematic viscosity 

TS EN 12607-1 Bitumen and bituminous binders - Determination of hardening resistance under the influence of heat and air - Part 1: RTFOT method 

TS EN 12607-2 Bitumen and bituminous binders - Determination of hardening resistance under the influence of heat and air - Part 2: TFOT method 

TS EN 12607-3 Bitumen and bituminous binders - Determination of curing resistance under the influence of heat and air - Part 3: RTF method 

TS EN 15814 + A2 Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements 

TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods 

TS EN 15564 Precast concrete products - Resin bonded concrete - Requirements and test methods 

TSE CEN / TR 15739 Precast concrete products - Concrete surfaces - Description 

TS EN 15498 Precast concrete products - Concrete block blocks with wood chip - Product characteristics and performance 

TS EN 13693 + A1 Precast concrete products - Special roof elements 

TS EN 14721 + A1 Metal fiber concrete - Test method - Measurement of fiber content in fresh and hardened concrete 

tst 13565 Insulated laminated sandwich lightweight units  

TS EN 1469 Natural stone products - Plates used in veneer - Specifications 

TS EN 12057 Natural stone products - Modular tiles - Specifications 

TS EN 12058 Natural stone products - Slab and stair cladding slabs - Specifications 

TS EN 13169 + A1 Thermal insulation products - For buildings - Fabricated products with expanded perlite sheet (EPB) - Specifications 

TS EN 13170 + A1 Thermal insulation products - For buildings - Fabricated products with expanded cork (ICB) - Specifications 

TS EN 16012 + A1 Thermal insulation for buildings - Reflective insulation products - Determination of declared thermal performance 

TS EN 16069 + A1 Thermal insulation products for buildings - Fabricated products made of polyethylene foam (PEF) - Specifications

TSE K 415 Polyurethane Topcoat Alkyd Based - Two Component

tkt 2015102413 Epoxy based anchoring compound  

prEN 16863 -  

ISO / DIS 10545-16 -  

TS 13687 Cement-based plaster - for thermal insulation board 

TS 13729 Thermal insulation products for buildings - Gas concrete board - Specifications 

TS 13729 Thermal insulation products for buildings - Gas concrete board - Specifications 

TS EN 15037-1 / D1 Precast concrete products - Threaded flooring systems - Part 1: Beams 

TS EN 14066 Natural stones - Test methods - Determination of the resistance to wear by thermal shock 

TS 3523 Determination of surface moisture content of concrete aggregates 

TS EN 12390-11 Hardened concrete tests-Determination of concrete chloride resistance, one-way diffusion 

TS EN 771-1: 2011 + A1 Masonry units - Specifications - Part 1: Clay masonry units 

TS EN 771-2: 2011 + A1 Masonry units - Specifications - Part 2: Lime sandstone masonry units 

TS EN 771-3: 2011 + A1 Masonry units - Specifications - section 3: Concrete masonry units (dense and light aggregate) 

TS EN 771-4: 2011 + A1 Masonry units - Specifications - Part 4: Aerated concrete masonry units 

TS EN 771-5: 2011 + A1 Masonry units - Specifications - Part 5: Artificial stone masonry units 

TS EN 771-6: 2011 + A1 Masonry units - Specifications - Part 6: Natural stone masonry units 

TSE K 480 Flat sheets - Manufactured using magnesium oxide and magnesium chloride - Product properties and test methods 

TS EN 1097-2 / D1 Tests for mechanical and physical properties of aggregates - Part 2: Methods for determination of fragmentation resistance 

TS ISO 3934 Vulcanized and thermoplastic tires - Preformed gaskets for construction - Classification, determination and test methods 

tkt 2015103654 Expandable Polystyrene Raw Material with Flame Retardant Properties  

TS EN 771-1 + A1 Masonry units - Specifications - Part 1: Clay masonry units 

TS EN 771-2 + A1 Masonry units - Specifications - Part 2: Lime sandstone masonry units 

TS EN 771-3 + A1 Masonry units - Specifications - Part 3: Concrete masonry units (Dense and light aggregate) 

TS EN 771-4: 2011 + A1 Masonry units - Specifications - Part 4: Aerated concrete masonry units  

TS EN 771-5: 2011 + A1 Masonry units - Specifications - Part 5: Artificial stone masonry units  

TS EN 771-6: 2011 + A1 Masonry units - Specifications - Part 6: Natural stone masonry units  

TS EN 12390-11 Hardened concrete tests-Determination of resistance of concrete to chloride ions, one-way diffusion  

TSE CEN / TR 16797-1 Building materials: Hazardous substances release assessment -Stational assessment of declared values-Section 1-Principles and application rules 

TS EN 459-3 Building lime-Part 3: Compliance 

tst EN 1469 Natural stone products - Plates used in cladding - Specifications  

TS EN 12057 Natural stone products - Modular tiles - Requirements 

tst EN 12058 Natural stone products - Slab and stair cladding slabs - Specifications  

TS 13565 / T2 Sandwich lightweight masonry units with insulation layer 

TSE EN 16572 Conservation of cultural heritage - Glossary of technical terms related to masonry mortars, renders and plasters used in cultural heritage 

TS EN 459-1 Building lime - Part 1: Definitions, specifications and eligibility criteria 

Tests for geometric properties of aggregates - Part 933: Determination of fine grains - Determination of sand equivalent 

TS EN 480-13 Chemical additives - For concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for tests of mortar chemical additives 

772: 1 + A2011 Masonry units - Test methods - Part 1: Determination of compressive strength 

TS EN 16687 Construction products - Evaluation of release of hazardous substances - Terminology 

TS EN 14216 Cement - Special cements - Very low temperature - composition, properties and conformity criteria 

TS EN 15743: 2010 + A1 Super sulphate cements - Composition, properties and conformity criteria 

TS 1475-2 Applications with gypsum board - Part 2: Rules for the application of curtain wall 

TS 1475-3 Applications with plasterboard - Part 3: Rules for the application of suspended ceilings 

TS 1475-4 Applications with plasterboard - Part4: Rules for the application of finishing works 

TS 1475-1 Applications with gypsum board - Part 1: Partition wall application rules 

TS EN 12730 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to static loads 

TS EN 1426 Bitumen and bituminous binders - Determination of needle penetration depth 

TS EN 1427 Bitumen and bituminous binders - Determination of softening point - Ring and ball method 

TS EN 12606-1 Bitumen and bituminous binders-Determination of paraffin wax content-Part 1: Distillation method 

TS EN 12593 Bitumen and bituminous binders - Fraas break / break point determination

tst 3078-1 Seals used as waterstops in joints in concrete structures - Thermoplastic - Part 1: Definitions and shape characteristics  

tst 3078-2 Sealing seals used as waterstops in joints in concrete structures - Thermoplastic - Part 2: Material requirements, tests and inspections

TS 4203 Concrete - Fresh concrete tests - Determination of mixer efficiency 

TSE K 480 / T1 Magnesium oxide based building panels - product properties and test methods 

TS EN 13808 Bitumen and bituminous binders - General principles for the identification of cationic bitumen emulsions 

tst EN 13163 + A2 Thermal insulation products - For buildings - Fabricated products of expanded polystyrene (EPS) - Specifications   

TS ISO 1920-10 Concrete tests-Part 10: Determination of static elastic modulus under pressure 

tst 2015105379 Guidance for mass concrete design and determination of proportions  

TS EN 14303 Thermal insulation products - For building installation and industrial applications - Fabricated mineral wool products - Features 

TS EN 14313 Thermal insulation products - For building installation and industrial applications - Fabricated polyethylene foam (pef) products - Specifications 

TS EN 459-1 Building lime - Part 1: Definitions, specifications and conformity criteria 

TS 13515 / T1 Complementary standard for the implementation of TS EN 206 

TS EN 16025-1 Thermal and / or soundproofing products for building construction - Connected EPS - Part 1: Pre-mixed dry EPS mortar in the factory 

TS EN 16025-2 Thermal and / or soundproofing products for building construction - Connected EPS - Part 2: Processing of pre-mixed dry EPS mortar in the factory 

tst 2015105472 (TSE K 480) Flat plates - Manufactured using magnesium oxide and magnesium chloride - Product properties and test methods

TS ISO 13007-1 Ceramic tiles - Sorbets and binders - Part 1: Terms, descriptions and specifications for binders 

TS ISO 13007-2 Ceramic tiles - Sorbets and binders - Part 2: Test methods for binders 

TS ISO 13007-4 Ceramic tiles - Sorbets and binders - Part 4: Test methods for sorbets 

TS ISO 13007-4 Ceramic tiles - Sorbets and binders - Part 4: Test methods for sorbets 

TS ISO 13007-3 Ceramic tiles - Sorbets and binders - Part 3: Terms, descriptions and specifications for sorbets 

TS ISO 13007-5 Ceramic tiles - Sorbets and binders - Part 5: Requirements, test methods, conformity assessment and brief demonstration of waterproofing membranes applied as binders under the bonded ceramic tile 

TS ISO 13007-5 Ceramic tiles - Sorbets and binders - Part 5: Requirements, test methods, conformity assessment and brief demonstration of waterproofing membranes applied as binders under the bonded ceramic tile 

TS ISO 4635 Tires-Preformed joint fillers-For joints between concrete pavements on highways 

TS 13565 Insulated laminated sandwich lightweight units 

TS EN 13279-2 / D1 Building gypsum and plaster - Part 2: Test methods 

tst EN 13162 + A1 Thermal insulation products - For buildings - Fabricated mineral wool (MW) - Specifications  

tst EN 13164 + A1 Thermal insulation products for buildings - Fabricated products with extruded polystyrene foam (XPS) - Specifications  

tst EN 13165 + A2 Thermal insulation products - For buildings - Rigid polyurethane foam (PU) fabricated products - Specifications  

TS EN 14304 Thermal insulation products for installation and industrial applications - Factory made flexible elastomeric foam (fef) products - Specifications 

TS EN 14304 Thermal insulation products for building equipment and installations in industrial plants - Fabricated flexible elastomeric foam (FEF) products - Specifications 

TSE K 325 / T1 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings 

TS 13744 Adhesion enhancing acrylic dispersion primers for plasters and adhesives - Specifications 

TS EN 15388 / D1 Agglomerated stones - Plates and dimensional products for bathroom and kitchen worktops 

TS 2902 Glazed bricks 

tst 2016107915 Plastic jacket anchors - Used for fixing exterior thermal insulation  

TS EN 1110: 2010 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of yield strength at high temperatures  

TS EN 1297 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Artificial aging methods with long-term exposure to UV radiation, high temperature and water combination  

TS EN 12691 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of impact resistance 

TS EN 12730 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to static loads  

TS EN 13583 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to impact impact of solid grains  

tst EN 12039 Flexible sheets for waterproofing - Bituminous sheets for roof waterproofing - Determination of adhesion to granules  

TS EN 13897 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof insulation - Determination of water tightness after stretching at low temperature  

TS EN 13948 Waterproofing-Flexible sheets-Bitumen, plastic and rubber sheets used in waterproofing of roofs- Determination of resistance to penetration of plant roots

TS EN 14196 Geosynthetics - Test methods - Determination of unit area mass of clay geosynthetic barriers 

Hygothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion TS EN ISO 15148 / A1 

TS EN 494 + A1 Corrugated sheets and fittings - Manufactured using fiber-reinforced cement - Product specifications and test methods 

TS EN 16622 Silica calcium fume for concrete - Definitions, requirements and eligibility criteria 

TSE CEN / TR 15728 Precast concrete elements - Design and use of studs for lifting and transporting elements 

TS ISO 3869 Composite anglomera mushroom (composite cork) - Used as filler material in expansion joints in buildings and buildings - Descriptive properties, packaging and marking 

TS 13515 / T2 Complementary standard for the implementation of TS EN 206 

TS EN ISO 10545-14 Ceramic tiles - Part 14: Determination of stain resistance 

TS ISO 3869 Composite anglomera mushroom (composite cork) - Used as filler material in expansion joints in buildings and buildings - Descriptive properties, packaging and marking 

TS EN 16659 Bitumen and bituminous binders-Multiple creep stress and recovery test (MSCRT) 

tst 2810-1 Sealing seals used as waterstops in joints in concrete structures - Elastomer - Part 1: Definitions and shape characteristics  

TS EN 14308 Thermal insulation products - For building installation and industrial applications - Fabricated hard polyurethane (pur) and hard polyisocyanate (pır) foam products - Features 

Hygothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion TS EN ISO 15148 / A1 

TSE K 480 / T2 Flat plates - Manufactured using magnesium oxide and magnesium chloride - Product properties and test methods 

TS EN 16724 Thermal insulation products for building applications - Installation and fixing instructions for determining the reaction of external composite thermal insulation systems to fire 

TS EN 15501 Thermal insulation products for building equipment and industrial applications - Factory made (prefabricated) expanded perlite (EP) and Scaly vermiculite (EV) products - Specifications 

TS EN 14314 Thermal insulation products - For building installation and industrial applications - Fabricated phenolic foam (pf) products - Specification 

TS EN 14309 Thermal insulation products - For building installation and industrial applications - Fabricated expanded polystyrene (eps) products - Features 

TS EN 14307 Thermal insulation products - For building installation and industrial applications - Fabricated polystyrene (xps) foam products 

TS EN 14306 Thermal insulation products - For building installation and industrial applications - Fabricated calcium silicate (cs) products - Features 

TS EN 14305 Thermal insulation products -For building installation and industrial applications -Propored glass (cg) products manufactured by fabrication -Features 

TSE K 161 Lightweight masonry units - Made of glass fiber reinforced composite 

TS EN 772-5 Masonry units - Test methods - Part 5: Determination of active soluble salt content of clay masonry units 

TS EN 13914-1 Design, preparation and application of exterior and interior plasters - Part 1: Exterior plaster 

TS EN 13914-2 Design, preparation and application of external and internal plasters - Part 2: Internal plasters 

TS EN 196-1 Cement test methods - Part 1: Determination of strength 

TS EN 13055 Lightweight aggregates 

TS EN 196-10 Cement test methods - Part 10: Determination of water soluble chromium (vi) content of cement 

TS EN 13719 Geosynthetics - Determination of long-term protection efficiency of geosynthetics in contact with geosynthetic sets 

TS EN 13230-5 Railway applications - Road - Concrete sleepers and supports - Part 5: Special elements 

TS EN 13230-1 Railway applications - Railway - Concrete sleepers and supports - Part 1: General rules 

TS EN 13230-2 Railway applications - Railway - Concrete sleepers and supports - Part 2: Prestressed monolithic sleepers 

TS EN 13230-3 TS EN 13230-3: 2015 Railway applications - Road - Concrete sleepers and supports - Part 3: Reinforced twin sleepers 

TS EN 13230-4 Railway applications - Road - Concrete sleepers and supports - Part 4: Pretension bearings for shears and cruisers 

TS EN 12039 Flexible sheets for waterproofing - Bituminous sheets for waterproofing on roofs - Determination of adhesion to granules 

TS EN 492 + A1 Fiber cement boards and fittings - Product specifications and test methods 

TS EN 1015-12 Masonry mortar - Test methods - Part 12: Determination of adhesion strength of hardened plaster and masonry mortar to the substrate 

TS EN 13165 + A2 Thermal insulation products - For buildings - Rigid polyurethane foam (PU) fabricated products - Specifications 

TS EN 13166 + A2 Thermal insulation products - For buildings - Fabricated phenolic foam (PF) - Specifications 

TS EN 12467 + A1 Flat sheets - Manufactured using fiber reinforced cement - Product properties and test methods 

TS EN 14411 Ceramic tiles - Definitions, classification, specifications, conformity assessment and marking 

TSE CEN / TS 16637-3 Construction products - Evaluation of the release of hazardous substances - Part 2: Horizontal gliding test 

tkt Fire-resistant acoustic foam - Open-pore flexible polyurethane foam impregnated with fire-resistant inorganic mineral Fire-resistant acoustic foam - Open-pore flexible polyurethane foam impregnated with fire-resistant inorganic mineral 

TS EN 14889-1 / D1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and compatibility 

TSE K 34 / T1 Plastic roofing tiles and fittings 

TS EN 12602 Prefabricated reinforced concrete elements 

TS EN 1304 Roof tiles and fittings - Made of clay - recipes and features 

TS EN 16382 Thermal insulation products for building applications - Determination of the tensile strength of plate anchors from thermal insulation products 

TS EN 16383 Thermal insulation products for building applications - Determination of heat and moisture behavior of exterior plasters and exterior thermal insulation composite systems

TS EN 413-2 Cement - Mortar cement - Part 2: Test methods 

TS EN 196-3 Cement test methods - Part 3: Determination of setting times and expansion 

TS EN 206: 2013 + A1 Concrete - Specification, performance, manufacturing and conformity 

TS EN 998-2 Masonry mortar - Specifications - Part 2: Masonry mortar 

TSE CEN / TR 16886 Guidance on the application of statistical methods to determine the properties of masonry units 

TS EN 13163: 2012 + A2 Thermal insulation products for buildings - Fabricated products of expanded polystyrene (EPS) - Specifications 

TS EN 13075-1 Bitumen and bituminous binders - Determination of fracture behavior - Part 1: Determination of fracture value of cationic bitumen emulsions by mineral filler method 

TS EN 13075-2 Bitumen and bituminous binders - Determination of fracture behavior - Part 2: Determination of the mixing time of cationic bitumen emulsions with fine mineral substances 

TS EN 16849 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Dry balance method 

TS EN 13587 Bitumen and bituminous binders - Determination of tensile properties of bituminous binders by tensile test method 

tkt 480 Magnesium oxide based building panels - Product properties and test methods  

TS EN 539-2 Clay roof tiles for discontinuous roofing - Determination of physical characteristics - Part 2: Frost resistance test 

tst EN 1304 Roof tiles and fittings - Made of clay - recipes and features  

tst EN 772-1: 2011 + A1 Masonry units - Test methods - Part 1: Determination of compressive strength  

TSE K 412 Plastic jacket anchors - Used for fixing exterior thermal insulation

TSE K 127 Thermal paints 

tst 2810-2 Sealing seals used as waterstops in joints in concrete structures - Elastomer- Part 2: Material properties and tests  

TS EN 998-1 Masonry mortar - Specifications - Part 1: Rough and fine plaster mortar 

tst EN 539-2 Clay roof tiles for discontinuous roofing - Determination of physical characteristics - Part 2: Frost resistance test  

TS EN 16809-2 Thermal insulation products for buildings - In situ formed from loose filled expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Requirements for bonded and loose filled articles after installation 

TS EN ISO 10545-13 Ceramic tiles - Part 13: Determination of resistance to chemicals 

TS EN 490 + A1 Concrete roofing tiles and fittings for roofing and wall covering - Product features 

TSE CEN / TR 17024 Natural stones - a guide to the use of natural stones 

TSE CEN / TS 12390-9 Concrete - Hardened concrete tests - Part 9: Freeze-thaw resistance with de-icing salts - Scaling 

tst 2017114870 (TSE K 274) Precast concrete sleeper - for low voltage, medium voltage and high voltage lines - Definitions, requirements and test methods  

TS 13307 Tartan surfaces applied in sports fields 

tst EN 12467 + A1 Flat plates - Manufactured using fiber-reinforced cement - Product properties and test methods  

tst 2017116141 Transport Principles of Bulk Cement  

TS EN 196-3 Cement test methods - Part 3: Determination of setting times and expansion  

TS EN 998-1 Masonry mortar - Specifications - Part 1: Rough and fine plaster mortar  

TS EN 998-2 Masonry mortar - Specifications - Part 2: Masonry mortar  

TS EN 1015-12 Masonry mortar - Test methods - Part 12: Determination of adhesion strength of hardened plaster and masonry mortar to the substrate  

TS EN 12602 Prefabricated reinforced concrete elements  

TS 13687 / tst T1 Cement based plaster - for thermal insulation board  

TSE K 539 Thermal insulation pipes and blocks made of expanded perlite 

TS EN 12004-1 Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of performance continuity, classification and marking 

TS EN 12004-2 Adhesives for ceramic tiles - Part 1: Test methods 

TS EN 12004-2 Adhesives for ceramic tiles - Part 1: Test methods 

TS EN 14891 Waterproof products for use under ceramic tiles bonded with adhesives - Requirements, test methods, evaluation and verification of performance continuity, classification and marking 

TS EN 14891 Waterproof products for use under ceramic tiles bonded with adhesives - Requirements, test methods, evaluation and verification of performance continuity, classification and marking 

TS EN 14891 Waterproof products for use under ceramic tiles bonded with adhesives - Requirements, test methods, evaluation and verification of performance continuity, classification and marking 

TS EN 12039 / AC Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion to granules 

TS EN 13653 Flexible sheets for waterproofing - For waterproofing on concrete bridge decks and other concrete surfaces open to traffic - Determination of shear strength 

TS EN 14223 Flexible sheets for waterproofing - For waterproofing on concrete bridge decks and other concrete surfaces open to traffic - Determination of water absorption 

TS EN 14691 Flexible sheets for waterproofing - For waterproofing of concrete bridge decks and other concrete surfaces open to vehicle traffic - Compatibility through heat treatment 

TS EN 14692 Flexible sheets for waterproofing - For waterproofing of concrete bridge decks and other concrete surfaces open to traffic - Determination of resistance to compaction of asphalt layer 

TS EN 14694 Flexible sheets for waterproofing - For waterproofing of concrete bridge decks and other concrete surfaces open to traffic - Determination of resistance to dynamic water pressure after damage caused by pretreatment 

TS EN 16908 Cement and building lime - Environmental product declarations - Product category to complement EN 15804 

TSE CEN / TR 17068 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Guidelines for CE marking and Declaration of Performance (DoP) 

TS EN 772-5 / AC Masonry units - Test methods - Part 5: Determination of active soluble salt content of clay masonry units

TS EN 15651-5 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 5: Evaluation and verification of performance continuity, marking and labeling 

TS EN 15651-4 Joint sealants - For non-structural use in joints in buildings and pedestrian paths - Part 4: Joint sealants used in floor joints of pedestrian paths 

TS EN 15651-3 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 3: Joint sealants used in wet spaces of buildings 

TS EN 15651-2 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 2: Joint sealants used in glass parts of buildings 

TS EN 15651-1 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 1: Joint sealants used in exterior facades of buildings 

TS 13779 Hardened concrete - Standard practice for petrographic inspection - Inspection under polarized microscope 

TSE K 545 Electromagnetic wave absorbing units - made of aerated concrete 

TSE K 97 / Revision Thermal insulation products - Used in buildings - Non-woven geotextile polyester felt products  

TS EN 206: 2013 + A1 Concrete - Specification, performance, manufacturing and conformity  

TS EN 12467 + A1 Flat sheets - Manufactured using fiber reinforced cement - Product properties and test methods  

TS EN 13499 / D1 Thermal insulation materials for buildings - Expanded polystyrene based composite thermal insulation systems (etics) - Specifications 

TSE K 10 Acrylic dispersion based, adherence and impermeability additive for plaster and screed

tst 407 Asmolen - Lightweight aggregate concrete block

TS 21 / Tadil G Çimento - White portland cement - Composition, properties and conformity criteria

TS 25 / T1 Natural pozzolan (used in cement and concrete) - Definitions, requirements and eligibility criteria 

TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals 

TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals

TSE K 50 Cold patch bitumen mixture for asphalt pavement repair 

TSE K 50 Cold patch bitumen mixture for asphalt pavement repair

TS EN 15819: 2011 Polymer modified bituminous thick covers for waterproofing - Fully dried layer thickness reduced 

TSE K 97 Thermal insulation products - Used in buildings - Non-woven geotextile felt products

TS 112 EN 12970 Mastic asphalt for waterproofing - recipes, specifications and test methods

TS EN 196-5 Cement test methods - Part 5: Pozzolanic property test in pozzolanic cements

TS EN 196-8 Cement test methods - Part 8: Heat of hydration - Solution method 

TS EN 196-9 Cement test methods - Part 9: Heat of hydration - Semi-adiabatic method 

TSE CEN / TR 196-4 Cement test methods - Part 4: Determination of component content 

TSE CEN / TR 196-4 Cement test methods - Part 4: Determination of component content

TS 202 Ceramic tiles - Tiles 

TS 202 / Tadil G Ceramic Tiles - Tile  

TS EN 206-1 / tst T Concrete - Part 1: Feature, performance, manufacturing  

TS 213-1 EN 13748-1 / T1 Terrazo tiles - For indoor use

tst 213-2 EN 13748-2 / T2 Terrazo tiles - for outdoor use  

tkt 200978363 Chemical anchors

TS EN 413-1: 2011 Mortar cement - Part 1: Composition, properties and conformity criteria 

TS 415 EN 12939 Thermal performance of building materials and products-Determination of thermal resistance by enclosed hot plate device and heat flow meter methods-High and medium heat resistant thick products 

TS EN 446 Sherbet - For prestressed reinforcement - Sherbet processing 

TS EN 447 Sherbet - For prestressed reinforcement - Basic requirements 

TS EN 450-2 Fly ash - Used in concrete - Part 2: Conformity assessment 

TS EN 451-2 Fly ash - Test method - Part 2: Determination of fineness by wet sieving 

TS EN 451-1 Fly ash - Test method - part 1: Determination of free calcium oxide content

TS EN 459-2 Building lime - Part 2: Test methods

TS EN 459-2 Building lime - Part 2: Test methods

TS EN 480-14 Chemical additives - For concrete, mortar and grout - Test methods - part 14: Determination of the effect of the additive on the susceptibility of reinforcing steel to corrosion - Potentiostatic electrochemical test 

TS EN 480-2 Chemical additives for concrete, mortar and grout-Test methods-Part 2: Determination of setting time 

TS EN 480-6 Chemical additives - For concrete, mortar and grout - Test methods - part 6: Infrared analysis 

TS EN 480-6 Chemical additives - For concrete, mortar and grout - Test methods - part 6: Infrared analysis 

TS EN 480-11 Chemical additives - For concrete, mortar and grout - Test methods - part 11: Determination of air gap properties in hardened concrete 

TS EN 480-4 Chemical additives - For concrete, mortar and grout - Test methods - part 4: Determination of amount of perspiration in concrete

TS EN 495-5 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Part 5: Determination of low temperature foldability 

TS EN 520 + A1 Gypsum boards - Definitions, requirements and test methods 

TS EN 534 + A1 Bituminous sheets - Corrugated - Product properties and test methods 

TS 537 Cemented adobe blocks - For walls 

TS 537 Cemented adobe blocks - For walls 

TS 537 / tst T Cemented adobe blocks - For walls  

TS 537 / tst T Cemented adobe blocks - For walls  

TS EN 539-1 Roof tiles - Made of clay - For discontinuous roofing - Determination of physical properties - Part 1: Water impermeability 

TS EN 588-2 Pipes - Made of fibrous cement - For drainage and sewage - Part 2: Inspection manholes and inspection chambers

TS EN 772-2 Masonry units - Test methods - Part 2: Determination of the percentage of void area of ​​the concrete masonry units (by means of paper extraction) 

TS EN 772-7 Masonry units - Test methods - Part 7: Determination of water absorption by water boiling method in clay masonry waterproofing layer units 

TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units 

TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units

TS EN 772-19 Masonry units - Test methods - Part 19: Determination of moisture expansion of large masonry units with horizontal holes 

TS EN 772-20 Masonry units - Test methods - Part 20: Determination of surface smoothness of masonry units made of aggregate, sand stone and natural stone 

TS EN 772-20 Masonry units - Test methods - Part 20: Determination of surface smoothness of masonry units made of aggregate, sand stone and natural stone

TS EN 772-11: 2011 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units 

TS EN 772-11: 2011 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units 

772: 18: Masonry units - Test methods - Part 2011: Determination of freeze-thaw resistance of silica sandstone masonry units 

TS EN 772-6 Masonry units - Test methods - Part 6: Determination of tensile strength of bending of concrete masonry units 

TS EN 772-2 / A1 Masonry units - Test methods - Part 2: Determination of the percentage of the space area of ​​the masonry units (by the method of paper tracing) 

TS EN 772-20 / A1 Masonry units - Test methods - Part 20: Determination of surface smoothness in masonry units 

TS EN 772-20 / A1 Masonry units - Test methods - Part 20: Determination of surface smoothness in masonry units

TS EN 858-1 Separation systems for light liquids (eg oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control 

TS 901-2 Fiber sound insulation materials - used in buildings

TS EN 932-6 Tests for general properties of aggregates - Part 6: Recipes for repeatability and adaptability 

TS EN 933-5 Tests for geometric properties of aggregates - Part 5: Determination of the percentage of crushed and crushed surfaces in coarse aggregates

TS EN 933-5 / A1 Tests for the geometric properties of aggregates - Part 5: Determination of the percentage of crushed and broken surfaces in coarse aggregates 

TS EN 933-10 Tests for geometric properties of aggregates - Part 10: Determination of fine material - Classification of fine filling materials by particle size (air jet sieving) 

TS EN 933-11 / AC Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components 

TS EN 933-4 Tests for geometric properties of aggregates - Part 1: Determination of grain shape - Index of shape 

TS EN 933-11 Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components 

TS EN 934-6 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment 

TS EN 934-6 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment 

TS EN 934-4 Chemical additives - For concrete, mortar and grout - Part 4: Chemical additives used in grout for prestressing tendons - Definitions, requirements, conformity, marking and labeling 

TS EN 934-6 / A1 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment 

TS EN 934-6 / A1 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment 

TS EN 934-5 Chemical additives for concrete, mortar and grout - Part 5: Sprayed concrete admixtures - Definitions and characteristics, conformity, marking and labeling 

TS EN 989 Determination of the adherence behavior of aerated concrete reinforcement bars by stripping test

TS EN 990 Aerated concrete and lightweight porous concrete - Verification of corrosion protection of reinforcement - Test methods 

TS EN 992 Lightweight aggregate porous concrete - Determination of dry density

TS EN 1008 Concrete - Mixed water - Sampling, testing and determination of the suitability of water as concrete mixed water, including water recovered from processes in the concrete industry

TS EN 1015-1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis) 

TS EN 1015-3 Masonry mortar- Test methods- Part 3: Determination of fresh mortar consistency (with spreading table) 

TS EN 1015-4 Masonry mortar - Test methods - Part 4: Determination of fresh mortar consistency (using dip tip) 

TS EN 1015-7 Masonry mortar - Test methods - Part 7: Determination of air content of fresh mortar 

TS EN 1015-10 Masonry mortar - Test methods - Part 10: Determination of the dry bulk volume volume of the hardened mortar 

TS EN 1015-17 Masonry mortar - Test methods - Part 17: Determination of water-soluble chloride content in fresh mortars 

TS EN 1015-3 / A1 Masonry mortar - Test methods - Part 3: Determination of fresh mortar consistency (with spreading table) 

TS EN 1015-11 / A1 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar 

TS EN 1015-2 / A1 Masonry mortar - Test methods - Part 2: Sampling from mortar stacks used in manufacturing and preparation for testing 

TS EN 1015-3 / A2 Masonry mortar - Test methods - Part 3: Determination of fresh mortar consistency (with spreading table) 

TS EN 1015-6 / A1 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar 

TS EN 1015-10 / A1 Masonry mortar - Test methods - Part 10: Determination of the hollow dry unit volume of hardened mortar 

TS EN 1015-9 / A1 Masonry mortar - Test methods - Part 9: Determination of the processing and correction time of fresh mortar 

TS EN 1015-17 / A1 Masonry mortar - Test methods - Part 17: Determination of water-soluble chloride content in fresh mortars 

TS EN 1015-1 / A1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis)

TS EN 1024 / T1 Roofing tiles - Made of clay - Determination of non-continuous geometric properties 

TS 2962-1 EN 1051-1 Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features 

TS 2962-1 EN 1051-1 / T1 (Number modification, TS EN 1051-1) Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features

TS EN 1097-3 Tests for physical and mechanical properties of aggregates part 3: Determination of loose bulk density and void volume 

TS EN 1097-2 Tests for mechanical and physical properties of aggregates part 2: Methods for determination of fragmentation resistance 

TS EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of stone polishing value 

TS EN 1097-5 Tests for mechanical and physical properties of aggregates - Part 5: Determination of water content by drying in air circulation oven 

TS EN 1097-1: Tests for mechanical and physical properties of aggregates - Part 2011: Determination of abrasion resistance (micro-deval) 

TS EN 1097-4 Tests for mechanical and physical properties of aggregates - Part 4: Determination of cavities of dry compacted filler material

TS EN 1107-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for roof waterproofing - Determination of dimensional stability 

TS EN 1108 Waterproofing covers-Bitumen covers for roof waterproofing-Determination of the ability to maintain its shape under the influence of temperature cycling

TS EN 1110: 2010 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of yield strength at high temperatures

TS EN 1170-1 Prefabricated concrete products-Glass fiber reinforced cement (ctç) test method - Part 1: Measurement of matrix consistency, "slamp test" method 

TS EN 1170-2 Prefabricated concrete products-Glass fiber reinforced cement test method - Part 2: Measurement of fiber content in fresh ctç "washing test 

TS EN 1170-3 Prefabricated concrete products-Glass fiber reinforced cement (ctç) test method - Part 3: Measurement of fiber content of spray ctc 

TS EN 1170-4 Prefabricated concrete products - Glass fiber reinforced cement (CTT) test method - Part 4: Determination of flexural strength "simple flexural test" method 

TS EN 1170-5 Prefabricated concrete products-Glass fiber reinforced cement (ctc) test method - Part 5: Determination of flexural strength "full flexural test" method

TS EN 1170-7 Prefabricated concrete products-Glass fiber reinforced cement test method - Part 7: Measurement of the greatest dimensional changes due to moisture 

TS EN 1170-8 Test method for glass-fiber-reinforced cement - Part 8: Repetitive weathering type test 

TS EN ISO 1182 The reaction of building products to fire tests - Flammability test 

TS 1247 Concrete construction, casting and maintenance rules (under normal weather conditions)

TS 1248 Concrete preparation, casting and maintenance rules - In abnormal weather conditions 

TS 1248 Concrete construction, casting and maintenance rules -In abnormal weather conditions  

TS 1260 / tst T Carrier flooring bricks (participating in static work)

TS EN 1296 Flexible sheets - Bitumen, plastic and rubber sheets for waterproofing on roofs - Artificial aging method by long-term exposure to high temperatures 

TS EN 1297 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Artificial aging methods with long-term exposure to UV radiation, high temperature and water combination

TS EN 1347 tile adhesives - Determination of wettability 

TS EN 1352 Gas concrete or lightweight aggregate porous concrete - Determination of static elasticity modulus under pressure 

TS EN 1353 Determination of gas concrete-Moisture content 

TS EN 1354 Porous lightweight concrete - Determination of compressive strength 

TS EN 1356 Gas concrete or lightweight aggregate porous concrete - Performance testing of pre-reinforced reinforced components under lateral loads 

TS EN 1367-2 Tests for thermal and degradation properties of aggregates - part 2: Magnesium sulfate test 

TS EN 1367-3 Tests for thermal and decomposition properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt" 

TS EN 1367-1 Tests for the determination of thermal and decomposition properties of aggregates - part 1: Determination of resistance to freezing and thawing 

TS EN 1367-4 Tests for thermal and wear properties of aggregates - Part 4: Determination of drying shrinkage

TS EN 1430 Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions 

TS EN 1431 Bitumens and bituminous binders - Determination of binder and distilled petroleum product content by distillation from bitumen emulsions 

tst EN 1520 / AC: 2003 (Priority 2) Prefabricated reinforced concrete components - Made of porous lightweight concrete

TS EN 1543 Concrete structures - Products and systems for protection and repair - Test methods - Determination of tensile strength increase in polymers 

TS EN 15815: 2011 Polymer modified bitumen thick covers for waterproofing - Compression resistance

TS EN 1738 Reinforced components made of aerated concrete - Determination of stresses in reinforcement under no load 

TS EN 1739 Prefabricated components made of aerated concrete or lightweight aggregate, porous concrete - Determination of shear strength in joints between components against forces in joint plane 

TS EN 1740 Prefabricated reinforcing components made of aerated concrete or lightweight aggregate porous concrete - Performance test on components subjected to loads in the longitudinal direction predominantly (vertical components) 

TS EN 1742 Prefabricated components made of aerated concrete or lightweight aggregate porous concrete - Determination of shear strength between different layers of multilayer components 

TS EN 1744-3 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by extraction of aggregates 

TS EN 1744-6 Tests for chemical properties of aggregates - Part 6: Determination of the effect of recovered aggregate extract on the setting time of cement 

TS EN 1744-4 Tests for chemical properties of aggregates - Part 4: Determination of water sensitivity of filler aggregates used in bituminous mixtures 

TS EN 1744-5 Tests for chemical properties of aggregates - Part 5: Determination of acid-soluble chloride salts 

TS EN 1847 Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing on roofs - Methods of exposure to liquid chemicals, including water 

TS EN 1848-1 Flexible sheets for waterproofing - Determination of deviation from length, width and direction - Part 1: Bituminous sheets for roof waterproofing 

TS EN 1849-2 Flexible sheets for roof waterproofing - Determination of thickness and unit area mass - Part 2: Plastic and rubber sheets

TS EN 1881 Concrete structures - Products and systems for protection and repair - Inspection methods - Pull-out test method for anchoring products 

TS EN 15817: 2011 Polymer modified bitumen thick covers for waterproofing - Water resistance

TS EN 1931 Flexible sheets - For water tightness - Roofing bitumen, plastic and rubber sheets - Determination of water vapor permeability 

TS EN 1937 Hydraulic setting test method of compounds used in troweling and / or leveling - Standard mixing application rules 

TS EN 1946-5 Thermal performance of building materials and elements - Specific criteria for the assessment of laboratories where heat transfer properties are measured - Part 5: Pipe test methods and measurements 

TS EN 1946-1 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 1: General criteria 

TS EN 1946-2 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 2: Measurements by enclosed hot table method

tkt 201081971 Coating material - used for thermal insulation - Mineral based

TS 2517 Determination of potential alkali silica reactivity of aggregates - chemical method 

TS 2517 Determination of potential alkali silica reactivity of aggregates - chemical method

tst 2941 Determination of unit weight, yield and air content in fresh concrete by weight method

TS 2987 Determination of setting time of concrete by measuring penetration resistance 

TS 2987 Determination of setting time in concrete

tst 3234 Bimsbeton construction rules, mixture calculation and test methods  

tst 3260 Determination of approximate concrete strength by concrete surface hardness  

TS 3261 Determination of the amount of air in fresh concrete by volume method

TS 3322 Concrete - Hardened concrete tests - Determination of length changes in cement mortar and concrete samples 

TS 3322 Determination of length changes in cement mortar and concrete samples  

TS 3322 Concrete - Hardened concrete tests - Determination of length changes in cement mortar and concrete samples

tst 3449 Determination of strength factor in concrete under rapid freezing and thawing conditions

TS ISO 1920-8: 2009 Concrete tests - Part 8: Determination of drying shrinkage of concrete for samples prepared on site or in laboratory

tst 3455 Method of determination of permeability coefficient in concrete

TS 3505 Prefabricated concrete canal saddles 

TS 3505 / T1 Prefabricated reinforced concrete canal saddles

TS 3528 Aggregate - Used in concrete - Determination of light material 

TS 3528 Determination of lightweight content in concrete aggregates

TS 3531 Prefabricated reinforced concrete canals 

TS 3531 / T1 Prefabricated reinforced concrete canals 

TS 3540 Prefabricated reinforced concrete duct sealing gaskets 

TS 3540 Prefabricated reinforced concrete duct sealing gaskets

tst 3624 Method for determining specific gravity, water absorption and void ratio in hardened concrete

TS ISO 3648 / cor 1 Aviation fuels - Net specific energy forecast; Technical printing error 1 

TS ISO 3648 Aviation fuels - Net specific energy forecast 

TS 3683 Prefabricated reinforced concrete canal stands and foundation blocks 

TS 3722 Construction, maintenance and application rules of perlite plaster and plaster mortars

TS EN 4131 / AC Aerospace series - Bolts, normal hex head, coarse tolerant thread, medium length thread, made of heat-resistant nickel-based alloy, with aluminum iv coated - Classification: 1250 mpa (at ambient temperature) / 425 ° c

TS 4447 Gypsum - ground (used in agriculture) 

tst 7044-1 ISO 4463-1 Building measurement methods - Specifying boundaries and measuring - Part 1: Planning and organization, measuring procedures, acceptance criteria  

TS 4562 / tst T Factory Bricks - For Walls - Clinker Bricks  

TS EN 4591 Building lime - Part 1: Definitions, specifications and conformity criteria 

TS 4790 Test method of brick and tile soils

tst 4834 Concrete related terms

TS 5410 Chamotte and high alumina refractory bricks - used in cement rotary kilns 

TS 5695 Building and cladding stones - Sure - Classification 

TS 5762 Diabase-Used as building and cladding stone 

TS 5762 / T1 Diabase-Modification used as building and cladding stone 1 

TS 5762 / tst T2 Diabase-Modification used as building and cladding stone 2  

TS 5893 ISO 3893 Concrete - Classification according to compressive strength

TS 5961 Serpentine - used as building and cladding stone 

TS 5961 / T1 Serpentine - Modification used as a building and cladding stone 1 

TS 5961 / tst T2 Serpentine - Modification used as building and cladding stone 2  

TS 6084 EN ISO 7389 Building construction - Joint materials - Determination of elastic recovery of sealing materials 

TS 6234 Granite - used as a building and cladding stone 

TS 6234 / T1 Granite - Modification used as building and cladding stone 1 

TS 6234 / tst T2 Granite - Modification used as building and cladding stone 2  

tst 7232 Tubular fibrous thermal insulation material

TS 7509 Preformed snap-on compression solid vulcanized sealing materials (used in rubber construction seals)

TS EN ISO 8339 Building construction-Joint materials-Joint sealing materials-Determination of tensile properties 

TS EN ISO 8340 Building construction-Joint materials-Joint sealing materials-Determination of tensile properties at constant elongation

TS EN ISO 9046 Building construction - Joint sealing materials - Determination of adhesion and cohesion properties at constant temperature

Tests for general characteristics of aggregates - Part 10088: Process and terminology for simplified petrographic identification TS 932 EN 3-1 / A3

TS 10157 / Tadil G Cement - Sulfate resistant cement - Composition, properties and conformity criteria  

TS EN ISO 10426-3 Steel products - Inspection documents - List of information and recipes

TS EN ISO 10426-4 Oil and gas industry - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement mortars at atmospheric pressure 

TS EN ISO 10426-5 Oil and gas industry-Cements and materials for well cementing-Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure 

TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications 

TS EN ISO 10426-6 Oil and gas industry-Cements and materials for well cementing-Part 6: Methods for determination of statil gel strength of well cement formulations 

tst EN ISO 10426-2 (Priority *) Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements  

TS EN ISO 10426-2 / AC Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements 

TS EN ISO 10426-2 / A1 Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements 

TS 10449 Marble-Calcium carbonate based-Used as building and cladding stone 

TS 10449 / T1 Marble-Calcium carbonate-based modification used as structure and cladding stone 1 

TS 10449 / tst T2 Marble-Calcium carbonate-based modification used as building and cladding stone 2

tst 10465 Concrete test methods - Sampling of hardened concrete in building and structural components and determination of compressive strength (destructive method)

TS EN ISO 10545-5 Ceramic tiles section 5: Determination of impact strength- By measuring bounce coefficient

TS EN ISO 10545-7 Ceramic tiles- Part 7: Glazed tiles- Determination of surface abrasion resistance 

TS EN ISO 10545-9 Ceramic tiles - Part 9: Determination of heat shock resistance 

TS EN ISO 10545-11 Ceramic tiles - Part 11: Glazed tiles - Determination of crack strength of glaze 

TS EN ISO 10545-12 Ceramic tiles section 12: Determination of frost resistance

TS EN ISO 10545-15 Ceramic tiles - Part 15: Determination of extracted lead and cadmium from glazed tiles

TS EN ISO 10563 Building construction - Joint materials - Determination of mass and volume changes 

TS EN ISO 10590 Building construction - Determination of adhesion and cohesion properties under shrinkage after immersion of joint materials in water 

TS EN ISO 10591 Building construction - Determination of adhesion and cohesion properties after dipping joint materials into water 

TS 10834 Gabbro-used as a building and cladding stone 

TS 10834 / T1 Modification used as gabbro-building and cladding stone 1 

TS 10834 / tst T2 Gabro-modification used as a building and cladding stone 2  

TS 10835 Andesite-Used as building and cladding stone 

TS 10835 / T1 Andesite - Modification used as building and cladding stone 1 

TS 10835 / tst T2 Andesite - Modification used as a building and cladding stone 2

TS 11051 Drilling cement-Manufacturing additives-General rules

TS 11135 Trakit - Used as a building and cladding stone 

TS 11135 / T1 Trakit - Modification used as building and cladding stone 1 

TS 11135 / tst T2 Trakit - Modification used as building and cladding stone 2  

TS 11137 Limestone (limestone) - used as building and cladding stone 

TS 11137 / T1 Limestone (limestone) - Modification used as a building and cladding stone 1 

TS 11137 / tst T2 Limestone (limestone) - Modification used as a building and cladding stone 2  

TS 11143 Travertine - used as building and cladding stone

TS 11143 / T1 Travertine - Modification used as building and cladding stone 1 

TS 11143 / tst T2 Travertine - Modification used as building and cladding stone 2  

TS 11145 Conglomerate - used as building and cladding stone 

TS 11145 / T1 Conglomerate - Modification used as building and cladding stone 1 

TS 11145 / T2 Conglomerate - used as building and cladding stone 

TS 11145 / tst T2 Conglomerate - Modification used as building and cladding stone 2  

TS EN ISO 11431 Building construction - Joint materials - Determination of adhesion / cohesion properties of sealing materials after exposure to heat, water and artificial light passing through glass 

TS EN ISO 11432 Building construction - Joint materials - Determination of compressive strength 

TS 11443 / tst T2 Onyx marble - Calcium carbonate based - Modification used as building and cladding stone 2  

TS 11444 / tst T2 Dolomite - Modification used as building and cladding stone 2  

TS 11553 Syenite - used as building and cladding stone 

TS 11553 / T1 XenUM-Modification used as a building and cladding stone 1 

TS 11553 / tst T2 XenUM-Modification used as a building and cladding stone 2  

TS EN ISO 11600 Building construction - Joint materials - Classification and requirements for sealing materials 

TS 11669 Limestone (limestone) - used in lime manufacturing

TS 11746 Concrete chemical additives - Concrete antifreeze (fresh concrete and mortar frost protection agent in cold weather)

TS EN ISO 11925-2: 2010 / AC: 2011 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding 

TS 11929 Geothermal energy-Non-metallic sealing materials-Simulated geothermal test fluid immersion method

TS EN 12190 Concrete structures - Products and systems for protection and repair - Test methods - Determination of compressive strength of repair mortar 

TS EN 12190 Concrete structures - Products and systems for protection and repair - Test methods - Determination of compressive strength of repair mortar 

TS EN 12269-2 Determination of bonding behavior between reinforcing steel and aerated concrete - By beam test - Part 2: Long term test 

TS EN 12269-1 Determination of bonding behavior between reinforcing steel and aerated concrete by "beam test" part 1: Short term test 

TS EN 12310-1 Flexible waterproofing sheets - Part 1: Bitumen roof waterproofing sheets - Determination of tear resistance (with nails) 

TS EN 12311-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of tensile properties

TS EN 12316-1 Flexible waterproofing boards - Part 1: Bitumen roof waterproofing boards - Determination of the separation resistance of the joint 

TS EN 12316-2 Flexible sheets for waterproofing - Determination of the peel strength of adherent joints - Part 2: Plastic and rubber sheets for roof sealing 

TS EN 12317-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of shear strength of joints 

TS EN 12317-2: 2010 Flexible sheets for waterproofing - Determination of shear strength of bonded joints - Part 2: Plastic and rubber sheets for roof sealing

tst 12349 Corrugated sheets and special parts - Organic fiber - Bituminous - Used in waterproofing under tiles  

TS EN 12350-10 Concrete - Fresh concrete tests - Part 10: Self compacting concrete - L box test 

TS EN 12350-10: 2010 Fresh concrete tests section 10: Self-compacting concrete- Sinking-L box test 

TS EN 12350-12: 2010 Fresh concrete tests section 12: Self-compacting concrete- Sinking-J ring test

TS EN 12350-4 Concrete - Fresh concrete tests - Part 4: Degree of compressibility 

TS EN 12350-5 Concrete - Fresh concrete tests - Part 5: Spreading table test 

TS EN 12370 Natural stones - Test methods - Determination of resistance to salt crystallization 

TS EN 12371 Natural stones - Test methods - Determination of resistance to frost

TS EN 12390-3 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens 

TS EN 12390-7 Concrete - Hardened concrete tests - Part 7: Determination of hardened concrete density 

TS EN 12390-8 Concrete - Hardened concrete tests - part 8: Determination of the depth of water treatment under pressure 

TS EN 12390-2 Concrete - Hardened concrete tests - Part 2: Preparation and curing of test specimens to be used in strength tests 

TS EN 12390-6 / tstAC Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of test specimens in splitting

TS EN 12390-3 / tst AC: 2011 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens

TS EN 12440 Natural stones - Naming criteria

TS EN 12504-1 Concrete - Concrete tests in building - Part 1: Core samples - Core drilling, inspection and determination of compressive strength 

TS EN ISO 12570 Hygiene performance of building materials and products - Determination of moisture content by drying at high temperature

TS 12596 Armor steel - Casting homogeneous

TS EN 12600 Glass - Used in buildings - Pendulum test - Impact test and classification for flat glass

TS EN 12636 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adherence of concrete to concrete 

TS EN 12667 Thermal performance of building materials and products-Determination of thermal resistance by enclosed hot plate and heat flow meter methods-High and medium heat resistant products

TS EN 12706 Adhesives - Test methods for hydraulic adjustment, flattening and / or leveling compounds - Flow determination 

TS EN 12737 + A1 Precast concrete products - flooring plates for livestock

TS EN 12794 + A1 Precast concrete products - Foundation piles 

TS EN 12808-2 Joint fillers - For tiles - Part 2: Determination of abrasion resistance 

TS EN 12808-1 Joint fillers - For tiles - Part 1: Determination of the chemical resistance of reaction resin mortars 

TS EN 12808-5 Joint fillers - For tiles - Part 5: Determination of water absorption 

TS EN 12808-3 Joint fillers - For tiles - Part 3: Determination of flexural and compressive strength 

TS EN 12843 Precast concrete products - Poles and columns

TS EN 12846-2: 2011 Bitumens and bituminous binders-Determination of flow time of bitumen emulsions with flow viscometer-Part 2 - Floor-Bek and thinned bitumen binders 

TS EN 12847 Bitumens and bituminous binders - Determination of precipitation tendencies of bitumen emulsions 

TS EN 12848 Bitumen and bituminous binders - determination of the stability of bitumen emulsions with cement 

TS EN 12849 Bitumen and bituminous binders - Determination of penetration power of bitumen emulsions " 

TS 451 EN 12859 / tst A1 Gypsum blocks - Definitions, properties and tests and test methods

TS EN 13009 Hygothermal performance of construction materials - Determination of hygric expansion coefficient

TS EN 13074-2: 2011 Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation - Part 1: Stabilization after recovery by evaporation 

TS EN 13074-1: 2011 Bitumen and bituminous binders - Recovery of binders from bitumen emulsions by evaporation - Part 1: Recovery by evaporation

TS EN 13084-5 Chimneys - Free standing - Part 5: Material for brick lining - Product specifications 

TS EN 13111 Flexible sheets for waterproofing - Supports for parted roof and wall coverings - Determination of resistance to water penetration

tst EN 13167 Thermal insulation products - Used in buildings - Factory made glass wool products -

TS EN 13198 Precast concrete products - Urban furniture and garden products

TS EN 13263-2 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria 

TS EN 13263-1 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria 

TS 13272 Standard application for sampling of materials according to probability principle

TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements 

TS EN 13301 Bitumen and bituminous binders - Determination of the tendency of bitumen to stain 

TS EN 13302 Bitumen and bituminous binders - Determination of the dynamic viscosity of bituminous binders using a rotary tube 

TS EN 13303 Bitumens and bituminous binders - Determination of mass loss of industrial bitumen by heating 

TS EN 13304 Bitumen and bituminous binders - Basic properties of oxidized bitumen 

TS EN 13305 Bitumen and bituminous binders - Basic properties of hard bitumen used in industry

TS EN 13358: 2010 Bitumen and bituminous binders - Determination of distillation properties of mineral powder and bitumen binders made of mineral powder "

TS 13362 Hemodialysis centers - General rules

TS EN 13373 Natural stones - Test methods - Determination of geometric properties of natural stone products 

TS EN 13375 Flexible sheets for waterproofing - Waterproofing systems for concrete bridge decks and other concrete pavements open to traffic - Rules for sampling and test sample preparation   

TS EN 13395-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 2: Determination of spreading in slurry or mortar

TS EN 13398 Bitumen and bituminous binders - Determination of elasticity of treated bitumen 

TS EN 13454-1 Binders, composite binders and factory made mixtures for calcium sulphate based screed materials - part 1: Definitions and characteristics 

TS EN 13454-1 Binders, composite binders and factory made mixtures for calcium sulphate based screed materials - part 1: Definitions and characteristics 

TS EN 13454-2 + A1 Binders, composite binders and ready mixes - Calcium sulfate based - For use on floor screeds - Part 2: Test methods

TS EN 13454-2 + A1 Binders, composite binders and ready mixes - Calcium sulfate based - For use on floor screeds - Part 2: Test methods 

TS EN 13467 Thermal insulation products for industrial plants and building equipment-Determination of dimensions, deflection and linearity of preformed thermal insulation products in tubular form 

TS EN 13468 Thermal insulation products for industrial plants and building equipment Determination of water soluble trace concentrations of chloride, fluoride, silicate and sodium ions and ph

TS EN 13471 Thermal insulation materials for industrial plants and building equipment Determination of coefficient of thermal expansion

TS EN 13497 Thermal insulation materials - Used in buildings - External composite thermal insulation systems (etıcs) - Determination of impact resistance 

TS EN 13499 Thermal insulation materials - Used in buildings - Expanded polystyrene based external composite thermal insulation systems (etıcs) - Specifications 

TS ISO 13543 Copper, lead and zinc sulphide concentrates - Calculation of metal mass in batch 

TS ISO 13543 Copper, lead and zinc sulphide concentrates - Calculation of metal mass in batch 

TS EN 13577 Concrete - Chemical effects - Determination of harmful carbon dioxide in water 

TS EN 13581 Concrete structures - Products and systems for protection and repair - Test methods - Determination of mass loss after freeze thawing of hydrophobic impregnated and sliced ​​concrete under salt pressure

TS EN 13588 Bitumen and bituminous binders - Determination of cohesion of bituminous binders - By pendulum test  

TS EN 13589 Bitumen and bituminous binders - Determination of tensile properties of treated bitumen by ductilometry

TS EN 13632 Bitumen and bituminous binders - Visual determination of polymer dispersion in polymer modified bitumen 

TS EN 13639 / AC Limestone - Determination of total organic carbon

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster 

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster 

TS EN 13693 + A1 Precast concrete products - Special roof elements 

TS EN 13702 Bitumen and bituminous binders - Determination of dynamic viscosity in modified bitumen by cone and plate method

TS EN 13747 + A2 Precast concrete products - Slab plates for laying systems 

TS 213-1 EN 13748-1 Terrazo tiles - For indoor use 

TS 213-2 EN 13748-2 / T1 Terrazo tiles - For outdoor use

TS EN 13815 Fiber reinforced prefabricated gypsum products - Definitions, requirements and test methods 

TS EN 13820 Insulation products - Used in buildings - Determination of organic content

TS EN 13888 Joint filler for tiles - Requirements, conformity assessment, classification and demonstration

TS EN 13892-6 Screed materials - Test methods - Part 6: Determination of surface hardness 

TS EN 13892-8 Screed materials - Test methods - Part 8: Determination of bond strength 

TS EN 13892-5 Screed materials - Test methods - Part 5: Determination of abrasion resistance of screed material used as wear layer against rotating wheel 

TS EN 13897 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof insulation - Determination of water tightness after stretching at low temperature  

TS EN 13915 Gypsum boards - Prefabricated - Hollow coreboard panels - Definitions, requirements and test methods 

TS EN 13948 Waterproofing-Flexible sheets-Bitumen, plastic and rubber sheets used in waterproofing of roofs- Determination of resistance to penetration of plant roots

TS EN 13978-1 Precast concrete products - Precast concrete garages - Part 1: Requirements for single-piece or monolithic reinforced concrete garages

TS EN 14016-2 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods 

TS EN 14016-1 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions and specifications 

TS EN 14063-1 Thermal insulation materials and products - On-site thermal insulation of expanded lightweight aggregate (lwa) - Part 1: Pre-placement properties of loose-filled materials 

TS EN 14063-1 / AC Thermal insulation materials and products - On-site thermal insulation of expanded clay lightweight aggregate (lwa) - Part 1: Pre-placement properties of loose-filled materials 

TS EN 14064-1 Thermal insulation products for buildings - On-site thermal insulation of loose textured mineral wool (mw) products - Part 1: Pre-placement properties of loose-filled materials 

TS EN 14064-2 Thermal insulation products for buildings - On-site thermal insulation of loose textured mineral wool (mw) products - Part 1: Properties of installed materials

TS EN 14068 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water tightness of injection filled cracks    

TS EN 14146 Natural stone test methods - Determination of dynamic elastic modulus (by measuring the basic resonance frequency) 

TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor deposition 

TS EN 14157 Natural stone - Determination of abrasion resistance   

TS EN 14158 Natural stone test methods - Determination of breaking energy    

TS EN 14188-3 Joints and gaskets - Part 3: Specifications

TS EN 14205 Natural stone test methods - Determination of knoop hardness 

TS EN 14209 Preformed gypsum board angle - Definitions, requirements and test methods

TS EN 14224 Flexible sheets for waterproofing - Waterproofing of concrete bridge tops and other concrete surfaces exposed to vehicle traffic - Determination of crack covering 

TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment 

TS EN 14246 Gypsum elements - Used in suspended ceilings - Definitions, requirements and test methods

tst EN 14304 Thermal insulation products for plumbing and industrial applications - Factory made flexible elastomeric foam (fef) products - Specifications

TS EN 14316-1 Thermal insulation materials - For buildings - On-site thermal insulation from expanded perlite (ep) - Part 1: Pre-placement properties of bonded and loose-filled materials 

TS EN 14316-2 Thermal insulation materials for buildings - On-site thermal insulation from expanded perlite (ep) - Part 2: Installed product specifications 

TS EN 14317-1 Thermal insulation products - Thermal insulation products used in buildings - Thermal insulation applied at the place of use with scaly vermiculite (pv) products - Part 1: Properties of bonded and loose-filled products prior to installation 

TS EN 14317-2 Thermal insulation materials for buildings - Thermally insulated vermiculite products - Part 2: Specification for installed products 

TS EN 14346 Characterization of wastes - Determination of dry matter or water content and determination of amount of dry matter

TS EN 14353 + A1 Metal bearings and connection profiles - Used in combination with gypsum boards - Definitions, requirements and test methods

TS EN 14474 Precast concrete products - Concrete using wood chips as agraga - Required properties and test methods   

TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability 

TS EN 14487-2 Shotcrete - Part 2: Application 

TS EN 14488-1 Shotcrete - Tests - Sampling from fresh and hardened concrete 

TS EN 14488-2 Shotcrete - Tests - Part 2: Compressive strength of new (young) shotcrete 

TS EN 14488-3 Shotcrete - Tests - Part 3: Flexural strength of fiber reinforced beam specimens (initial crack, final and residual bending strengths) 

TS EN 14488-5 Shotcrete - Tests - Part 5: Determination of energy absorption capacity in fiber-reinforced plate samples 

TS EN 14488-6 Shotcrete - Tests - Part 6: Thickness of concrete on the base 

TS EN 14488-7 Shotcrete - Tests - Part 7: Fiber content in fiber-reinforced concrete 

TS EN 14496 Gypsum based binders - Composite sheets and gypsum sheets for heat / sound insulation - Definitions, requirements and test methods

TS EN 14575 Geosynthetic barriers - Test methods - Determination test method for determination of resistance to oxidation 

TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression 

TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus 

TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient 

TS EN 14617-1 Agglomerated stones - Test methods - Part 1: Determination of apparent density and water absorption

TS EN 14617-9 Agglomerated stones - Test methods - Part 9: Determination of impact resistance

TS EN 14617-11 Agglomerates - Test methods - Part 11: Determination of the coefficient of linear thermal expansion 

TS EN 14617-15 Agglomerates - Test methods - Part 15: Determination of compressive strength 

TS EN 14617-13 Agglomerated stones - Test methods - Part 13: Determination of electrical resistance 

TS EN 14617-16 Agglomerates - Test methods - Part 16: Determination of dimensions, geometric properties and surface quality of modular tiles 

TS EN 14617-8 Agglomerated stones - Test methods - Part 8: Determination of resistance to fixation (with dowels)

TS EN 14647 Calcium aluminate cement - Composition, properties and conformity criteria 

TS EN 14649 Precast concrete products - Test method - Determination of the strength of cement and glass fiber in concrete (hot test) 

TS EN 14650 Precast concrete products - General rules for factory production control of metal fiber concrete 

TS EN 14651 + A1 Metal fiber concrete - Test method - Determination of tensile strength at bending (loc limit, residual)

TS EN 14693 Flexible slabs for waterproofing - Concrete bridge bases and waterproofing of other concrete surfaces open to vehicle traffic - Determination of the behavior of bituminous slabs in mastic asphalt application

TSE ISO / TR 14697 Fire tests - Guidance on selection of substrate for construction products

TS EN 14721 + A1 Metal fiber concrete - Test method - Measurement of fiber content in fresh and hardened concrete

TS EN 14845-1 Fibers - Used in concrete - Test methods - Part 1: Blank concretes 

TS EN 14889-1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and suitability 

TS EN 14889-2 Fibers - For use in concrete - Part 2: Polymer fibers - Definitions, specifications and compatibility

TS EN 14944-3 The effect of cementitious products on human consumption waters - Test methods - Part 3: Release of substances from factory-made cementitious products 

TS EN 14967 Flexible sheets for waterproofing - Bituminous waterproofing sheets - Definitions and features 

TS EN 14991 Precast concrete products - Basic elements 

TS EN 15035 Heating boilers-70 with special rules for the liquid fuel combustion chamber sealing unit up to kw 

TS EN 15037-1 Precast concrete products - Gear laying systems - Part 1: Beams

TS EN 15037-2 + A1 Precast concrete products - Threaded laying systems - Part 2: Concrete blocks 

TS EN 15037-3 + A1 Precast concrete products - Gear laying systems - Part 3: Clay blocks 

TS EN 15057 Corrugated sheets - Manufactured using fiber-reinforced cement - Impact resistance test method 

TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria 

TS EN 15167-2 Ground blast furnace slag - For use in concrete, mortar and grout - Part 2: Conformity assessment 

TS EN 15191 Precast concrete products - Classification of glass fiber reinforced concrete performance 

TSE CEN / TR 15225 Masonry mortar - Designed - Guidance on factory production control for Ce marking (conformity verification system 2 +) 

TS EN 15258 Precast concrete products - Retaining wall elements 

TS EN 15283-2 + A1 Fiber reinforced gypsum boards - Definitions, requirements and test methods - Part 2: Gypsum boards reinforced with cellulosic fibers 

TS EN 15285 Stacked stones - Modular tiles for floor and stair covering (internal and external) 

TS EN 15318 Design and implementation of gypsum blocks 

TS EN 15319 General principles based on the design of fibrous plaster applications

TS EN 15326 + A1 Bitumen and bituminous binders-Determination of density and specific mass-Capillary cap pycnometer method 

TS EN 15368 + A1: 2010 Hydraulic connectors for non-structural applications - Definitions, specifications and conformity criteria 

TS EN 15388 Agglomerated stones - Plates and sized products for toilets and kitchens 

TS EN 15435 Precast concrete products - Normal and lightweight concrete curtain blocks - Product characteristics and performance 

TS EN 15498 Precast concrete products - Concrete chipboard curtain blocks - Product characteristics and performance

TS EN 15564 Precast concrete products - Resin bonded concrete - Requirements and test methods 

TS EN 15600-2: 2010 Thermal insulation products for industrial insulation and building equipment-Thermal insulation for use with scaly vermiculite (pv) products - Part 2: Properties of laid-out materials 

TS EN 15715 Thermal insulation products - Installation and fixing instructions for reaction to fire test -Fabricated products

TSE CEN / TR 15739 Precast concrete products - Concrete surfaces - Description

TS EN 16002 Flexible sheets for waterproofing - Determination of wind load resistance of mechanically screwed sheets for roof waterproofing 

TS EN 15818: 2011 Polymer-modified bitumen thick covers for waterproofing - Determination of dimensional stability at high temperatures

TS EN 196-5: 2011 Cement test methods - Part 5: Pozzolanic property test in pozzolanic cements

TS 13473 Concrete pipes and fittings - Dn 1750 larger than mm 

TSE K 118 Precast concrete elements - Quality management systems

tst 1260 Carrier flooring bricks (participating in static work)

TS EN 13084-5 / AC Chimneys - Free standing - Part 5: Material for brick lining - Product specifications

tst EN 14305 Thermal insulation products -For building installation and industrial applications -Profile fabricated porous glass (cg) products -Features  

tst EN 14306 Thermal insulation products - For building installation and industrial applications - Fabricated calcium silicate (cs) products - Features  

tst EN 14307 Thermal insulation products - For building installation and industrial applications - Fabricated polystyrene (xps) foam products - Features  

tst EN 14308 Thermal insulation products - For building installation and industrial applications - Fabricated rigid polyurethane (pur) and rigid polyisocyanate (py) foam products - Features  

tst EN 14309 Thermal insulation products - For building installation and industrial applications - Fabricated expanded polystyrene (eps) products - Features

tkt 200769812 Anti-lime powder  

TS 13491 Thermal insulation products - For buildings - Expanded polystyrene foam sheets (eps) - Application rules