Our company offers the test, audit and certification services of the following standards to its customers by considering the sector requirements.
TS EN 932-1 Tests for general properties of aggregates-Part 1 sampling methods
Tests for general properties of aggregates 10088: Process and terminology for simplified petrographic identification
TS EN 932-2 Tests for general properties of aggregates part 2: Method of reduction of laboratory samples
TS EN 772-3 Masonry units - Test methods - Part 3: Determination of net volume and percentage of cavity in water by weighing method
TS EN 772-4 Masonry units - Test methods - Part 4: Determination of the total and apparent porosity of natural stone masonry units and the volume volume of void and void volume
TS EN 772-9 Masonry units - Test methods - Part 9: Determination of the void volume and percentage and net volumes of lime sandstone masonry units by sand filling method
TS EN 933-7 Tests for geometric properties of aggregates - Part 7: Determination of shell content in coarse aggregates - Percentage of shell
TS EN 1925 Natural stones - Test methods - Determination of water absorption coefficient due to capillary effect
TS EN 772-13 Heavy units - Test methods - Part 13: Determination of net and gross dry unit volume masses of masonry units (excluding natural stone)
TS EN 772-15 Masonry units - Test methods - Part 15: Determination of water vapor permeability in aerated concrete masonry units
TS 5694 EN 12670 Natural stones - Terms and definitions
TS EN 13364 Natural stones-Test methods-Determination of the breaking load in the stud hole
TS EN 1744-3 Tests for chemical properties of aggregates
TS EN 13639 Determination of total organic carbon in limestone
TS EN 13383-1 Protection layer stones section 1: Features
TS 2717 EN 13139 Aggregates - For mortar construction
TS 7043 EN 13450 Aggregates for railway ballasts
TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment
TS EN 13043 Bituminous mixtures and aggregates for surface applications in roads, airports and other open traffic areas
TS EN 13639 Limestone - Determination of total organic carbon
TS EN 13383-1 Protection layer stones (armor stone) - Part 1: Specifications
TS EN 13043 Aggregates - For surface treatment and bituminous mixtures to be used in roads, airports and other open traffic areas
TS EN 13373 Natural stones-Test methods-Determination of geometric properties of units
TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment
TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment
TS EN 858-1 / A1 Separation systems for light liquids (such as oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control
S EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt" - Modification ac
TS EN 13383-1 / AC Protection layer stones (armor stone) - Part 1: Specifications
TS 7043 EN 13450 / AC Aggregates for railway ballasts
TS EN 13450 / AC Aggregates for railway ballasts
TS EN 13383-1 / AC Protection layer stones (armor stone) - Part 1: Specifications
TS EN 933-5 / A1 Tests for geometric properties of aggregates - Part 5: Determination of the percentage of crushed and broken surfaces in coarse aggregates
TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt"
TS EN 1744-5 Tests for chemical properties of aggregates - Part 5: Determination of acid-soluble chloride salts
TS EN 1744-6 Tests for chemical properties of aggregates - Part 6: Determination of the effect of recovered aggregate extract on cement setting time
TS EN 1936 Natural stones- Test methods- Determination of real density, apparent density, total and open porosity
TS EN 13242 + A1 Aggregates for bonded and hydraulic bonded materials used in civil engineering works and road construction
TS EN 15285 / AC Stacked stones - Modular tiles for floor and stair covering (internal and external)
TS 706 EN 12620 + A1 Concrete aggregates
TS EN 13242 + A1 Aggregates for bonded and hydraulic bonded materials used in civil engineering works and road construction
TS EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 7: Determination of grain density of fill - Picnometer method
TS EN 1367-6 Tests for thermal and wear properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
TS EN 1367-2 Tests for thermal and degradation properties of aggregates part 2: Magnesium sulfate test
TS EN 12059 + A1 Natural stone products - Dimensional stones - Requirements
TS EN 1367-5 Tests for thermal and degradation properties of aggregates - Part 5: Determination of resistance to thermal shock
TS EN 12371 Natural stones-Test methods-Determination of frost resistance
TS EN 16140 Natural stone test methods - Determination of sensitivity to changes in appearance caused by thermal cycles
TS EN 772-11 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, gas concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
TS EN 772-16 Heavy units - Test methods - Part 16: Determination of dimensions
TS EN 772-21: 2011 Masonry units - Test methods - Part 21: Determination of cold water absorption and water absorption of clay and silica sandstone masonry units
TS EN 933-3 Tests for geometric properties of aggregates part 3: Determination of grain shape flatness index
TS EN 932-5 Tests for general properties of aggregates - Part 5: General instruments and calibration
TS EN 1744-7 Tests for chemical properties of aggregates - Part 7: Determination of combustion loss of aggregate (MIBA aggregate) in municipal ash incinerator
TS EN 1467 Natural stones - Raw blocks - Specifications
TS EN 1468 Natural stones - unprocessed boards - Specifications
TS EN 14617-4 Agglomerated stones - Test methods - Part 4: Determination of abrasion resistance
TS EN 14617-5 Agglomerated stones - Test methods - Part 5: Determination of freezing and melting resistance
TS EN 14617-6 Agglomerated stones - Test methods - Part 6: Determination of resistance to thermal shock
TS EN 14617-10 Agglomerated stones - Test methods - Part 10: Determination of chemical resistance
TS EN 14617-12 Agglomerated stones - Test methods - Part 12: Determination of dimensional stability
TS EN 12059: 2008 + A1: 2011 Natural stone products - Sizing of stones - Features
TS EN 12372 Natural stones - Test methods - Determination of bending strength under heavy loads
TS EN 1926 Natural stones - Test methods - Determination of uniaxial compressive strength
TS EN 12407 Natural stones - Test methods - Petrographical investigation
TS EN 933-1: 2012 (EN) Tests for geometric properties of aggregates part 1: Determination of particle size distribution - Screening method
TS EN 1467 Natural stones - Raw blocks - Specifications
TS EN 1468 Natural stones - Untreated plates - Specifications
TS EN 14618 Agglomerate stones - Terms and classification
TS EN 15388 Agglomerated stones - Plates and dimensional products for bathroom and kitchen worktops
TS EN 14617-1 Agglomerated stones - Test methods - Part 1: Determination of apparent density and water absorption
TS EN 1744-1: Tests for chemical properties of aggregates - Part 2009: Chemical analysis
TS EN 13161 Natural stones - Test methods - Determination of bending strength under constant moments
TS EN 13755 Natural stones - Test methods - Determination of water absorption at atmospheric pressure
TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor wear
TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression
TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus
TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient
TS EN 14146 Natural stones - Test methods - Determination of dynamic elasticity modulus (by measuring basic resonance frequency)
TS EN 14157 Natural stones - Determination of wear resistance
TS EN 14158 Natural stones - Test methods - Determination of breaking energy
tst EN 14205 Natural stones - Test methods - Determination of knoop hardness
TS EN 16140 Natural stones - Test methods - Determination of sensitivity to changes in appearance caused by thermal cycles
TS EN 933-9 + A1 Tests for geometric properties of aggregates - Part 9: Determination of fine grains - Methylene blue test
TS EN 1097-1 Tests for mechanical and physical properties of aggregates - Part 1: Determination of abrasion resistance (micro-Deval)
TS EN 1097-2 Tests for mechanical and physical properties of aggregates - Part 2: Methods for determination of fragmentation resistance
TS EN 1097-5 Tests for mechanical and physical properties of aggregates - Part 5: Determination of water content by drying in air circulation oven
TS EN 12620 Concrete aggregates
tst EN 12620 Concrete aggregates
tst EN 13043 Bituminous mixtures and aggregates for surface applications in roads, airports and other open traffic areas
tst EN 13139 Aggregates - For mortar making
tst EN 13242 Aggregates for non-binding and hydraulic bonding materials for civil engineering works and road construction
tst EN 16236 Aggregate conformity assessment - Initial Type Testing and Factory Production Control
TS EN 1097-6 Tests for mechanical and physical properties of aggregates part 6: Determination of grain density and water absorption rate
TS EN 1097-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and limited compressive strength of lightweight aggregates
TS EN 13383-2 Protection layer stones (armor stone) - Part 2: Test methods
tst EN 16236 Aggregate conformity assessment - Initial Type Testing and Factory Production Control
TS EN 1097-6 Tests for mechanical and physical properties of aggregates part 6: Determination of grain density and water absorption rate
TS EN 1097-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and limited compressive strength of lightweight aggregates
TS EN 13383-2 Protection layer stones (armor stone) - Part 2: Test methods
TS EN 15286 Agglomerated stones - Slabs and tiles for wall coverings (external and internal)
TS EN 14618 Agglomerate stones - Terms and classification
TS EN 15285 Agglomerate stones - Modular tiles for indoor and outdoor cladding (indoor and outdoor)
TS EN 15285 / AC Agglomerated stones - Modular tiles for floor and stair covering (internal and external)
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN 15167-2 Ground blast furnace slag - For use in concrete, mortar and grout - Part 2: Conformity assessment
TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test
TS EN 14617-4 Agglomerated stones - Test methods - Part 4: Determination of abrasion resistance
TS EN 14617-5 Agglomerated stones - Test methods - Part 5: Determination of freezing and melting resistance
TS EN 14617-6 Agglomerated stones - Test methods - Part 6: Determination of thermal shock resistance
TS EN 14617-8 Agglomerated stones - Test methods - Part 8: Determination of resistance to fixation (with dowels)
TS EN 14617-9 Agglomerated stones - Test methods - Part 9: Determination of impact resistance
TS EN 14617-10 Agglomerated stones - Test methods - Part 10: Determination of chemical resistance
TS EN 14617-11 Agglomerated stones - Test methods - Part 11: Determination of the coefficient of linear thermal expansion
TS EN 14617-12 Agglomerated stones - Test methods - Part 12: Determination of dimensional stability
TS EN 14617-13 Agglomerated stones - Test methods - Part 13: Determination of electrical resistivity
TS EN 1097-4 Tests for mechanical and physical properties of aggregates - Part 4: Determination of voids of dry compacted filling material
TS EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 7: Determination of grain density of filler material - Pycnometer method
TS EN 14617-15 Agglomerated stones - Test methods - Part 15: Determination of compressive strength
TS EN 14617-16 Agglomerated stones - Test methods - Part 16: Determination of dimensions, geometric properties and surface quality of modular tiles
TS EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of stone polishing value
TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test
TS EN 932-5 Tests for general properties of aggregates - Part 5 - General devices and calibration
TS EN 1097-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and limited compressive strength of lightweight aggregates
TS EN 933-1 Tests for geometric properties of aggregates - Part 1: Determination of particle size distribution - Screening method
TS EN 1097-6 Tests for mechanical and physical properties of aggregates - Part 6: Determination of grain density and water absorption rate
tst EN 13383-2 Protection layer stones - Section 2: Test methods
TS EN 933-3 Tests for geometric properties of aggregates - Part 3: Determination of grain shape - Flatness index
TS EN 933-4 Tests for geometric properties of aggregates - Part 4: Determination of grain shape - Shape index
tst EN 933-9 + A1 * Tests for geometric properties of aggregates - Part 9: Evaluation of fine material - Methylene blue test
TS EN 933-10 Tests for geometric properties of aggregates - Part 10: Determination of fine material - Classification of fine filling materials by particle size (air jet sieving)
TS EN 933-11 Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components
TS EN 933-11: Tests for geometric properties of aggregates 2010 / AC - Part 11: Classification test for recovered coarse aggregate components
TS EN 1367-4 Tests for thermal and decomposition properties of aggregates - Part 4: Determination of drying shrinkage
TS EN 1367-5 Tests for thermal and decomposition properties of aggregates - Part 5: Determination of thermal shock resistance
TS EN 1367-6 Tests for thermal and decomposition properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
TS EN 1744-1 + A1 Tests for chemical properties of aggregates - Part 1: Chemical analysis
TS EN 1744-7 Tests for chemical properties of aggregates - Part 7: Determination of combustion loss of aggregate (MIBA aggregate) in municipal ash incinerator
TS EN 933-9 + A1: Tests for the geometric properties of aggregates - Part 2013: Determination of fine material - Methylene blue test
TS EN 933-6 Tests for geometric properties of aggregates - Part 6: Determination of surface characteristics - Determination of flow coefficient in aggregates
TS EN 1367-7 Tests for thermal and wear properties of aggregates - Part 7: Determination of resistance of lightweight aggregates to freezing and thawing
TS EN 1367-8 Tests for thermal and wear properties of aggregates - Part 8: Determination of the resistance of lightweight aggregates to disintegration
TS EN 932-5 / AC Tests for general properties of aggregates - Part 5: General devices and calibration
TS EN 1097-10 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water absorption height
TS EN 12326-1 Slate and stone products for discontinuous roofing and siding - Part 1: Specification for slate and carbonated slate
TS EN 933-6 Tests for geometric properties of aggregates - Part 6: Determination of surface characteristics - Determination of flow coefficient of aggregates
TS EN 1367-7 Tests for thermal and wear properties of aggregates - Part 7: Determination of resistance of lightweight aggregates to freezing and thawing
TS EN 1097-10 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water absorption height
TS EN 1367-8 Tests for thermal and wear properties of aggregates - Part 8: Determination of the resistance of lightweight aggregates to disintegration
TS 699 / T1 Natural building blocks - Examination and laboratory test methods
TS EN 932-5 / AC Tests for general properties of aggregates - Part 5: General instruments and calibration
TSE K 325 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TS EN 12326-1 Slate and stone products for discontinuous roofing and siding - Part 1: Specification for slate and carbonated slate
TS EN 1469 Natural stone products - Plates used in veneer - Specifications
TS EN 12057 Natural stone products - Modular tiles - Specifications
TS EN 12058 Natural stone products - Slab and stair cladding slabs - Specifications
TS EN 14066 Natural stones - Test methods - Determination of the resistance to wear by thermal shock
TS EN 771-6: 2011 + A1 Masonry units - Specifications - Part 6: Natural stone masonry units
TS EN 1097-2 / D1 Tests for mechanical and physical properties of aggregates - Part 2: Methods for determination of fragmentation resistance
TS EN 771-6: 2011 + A1 Masonry units - Specifications - Part 6: Natural stone masonry units
tst EN 1469 Natural stone products - Plates used in cladding - Specifications
TS EN 12057 Natural stone products - Modular tiles - Requirements
tst EN 12058 Natural stone products - Slab and stair cladding slabs - Specifications
Tests for geometric properties of aggregates - Part 933: Determination of fine grains - Determination of sand equivalent
TSE K 325 / T1 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TS EN 15388 / D1 Agglomerated stones - Plates and dimensional products for bathroom and kitchen worktops
TS EN 13055 Lightweight aggregates
TSE CEN / TR 17024 Natural stones - a guide to the use of natural stones
TS 13307 Tartan surfaces applied in sports fields
TSE K 50 Cold patch bitumen mixture for asphalt pavement repair
TS 699 Natural building blocks - Examination and laboratory test methods
TS EN 772-7 Masonry units - Test methods - Part 7: Determination of water absorption by water boiling method in clay masonry waterproofing layer units
TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units
TS EN 772-19 Masonry units - Test methods - Part 19: Determination of moisture expansion of large masonry units with horizontal holes
TS EN 772-20 Masonry units - Test methods - Part 20: Determination of surface smoothness of masonry units made of aggregate, sand stone and natural stone
TS EN 772-11: 2011 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
TS EN 772-20 / A1 Masonry units - Test methods - Part 20: Determination of surface smoothness in masonry units
TS EN 858-1 Separation systems for light liquids (eg oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control
TS EN 933-5 / A1 Tests for the geometric properties of aggregates - Part 5: Determination of the percentage of crushed and broken surfaces in coarse aggregates
TS EN 933-10 Tests for geometric properties of aggregates - Part 10: Determination of fine material - Classification of fine filling materials by particle size (air jet sieving)
TS EN 933-11 / AC Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components
TS EN 933-4 Tests for geometric properties of aggregates - Part 1: Determination of grain shape - Index of shape
TS EN 933-11 Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components
TS EN 1097-3 Tests for physical and mechanical properties of aggregates part 3: Determination of loose bulk density and void volume
TS EN 1097-2 Tests for mechanical and physical properties of aggregates part 2: Methods for determination of fragmentation resistance
TS EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of stone polishing value
TS EN 1097-5 Tests for mechanical and physical properties of aggregates - Part 5: Determination of water content by drying in air circulation oven
TS EN 1097-1: Tests for mechanical and physical properties of aggregates - Part 2011: Determination of abrasion resistance (micro-deval)
TS EN 1097-4 Tests for mechanical and physical properties of aggregates - Part 4: Determination of cavities of dry compacted filler material
TS 1260 / tst T Carrier flooring bricks (participating in static work)
TS EN 1367-2 Tests for thermal and degradation properties of aggregates - part 2: Magnesium sulfate test
TS EN 1367-3 Tests for thermal and decomposition properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt"
TS EN 1367-4 Tests for thermal and wear properties of aggregates - Part 4: Determination of drying shrinkage
TS EN 1744-3 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by extraction of aggregates
TS EN 1744-6 Tests for chemical properties of aggregates - Part 6: Determination of the effect of recovered aggregate extract on the setting time of cement
TS EN 1744-4 Tests for chemical properties of aggregates - Part 4: Determination of water sensitivity of filler aggregates used in bituminous mixtures
TS EN 1744-5 Tests for chemical properties of aggregates - Part 5: Determination of acid-soluble chloride salts
TS 2517 Determination of potential alkali silica reactivity of aggregates - chemical method
TS 3528 Determination of lightweight content in concrete aggregates
TS 4562 / tst T Factory Bricks - For Walls - Clinker Bricks
TS 4790 Test method of brick and tile soils
TS 5410 Chamotte and high alumina refractory bricks - used in cement rotary kilns
TS 5695 Building and cladding stones - Sure - Classification
TS 5762 Diabase-Used as building and cladding stone
TS 5762 / T1 Diabase-Modification used as building and cladding stone 1
TS 5762 / tst T2 Diabase-Modification used as building and cladding stone 2
TS 5961 Serpentine - used as building and cladding stone
TS 5961 / T1 Serpentine - Modification used as a building and cladding stone 1
TS 5961 / tst T2 Serpentine - Modification used as building and cladding stone 2
TS 6234 Granite - used as a building and cladding stone
TS 6234 / T1 Granite - Modification used as building and cladding stone 1
TS 6234 / tst T2 Granite - Modification used as building and cladding stone 2
Tests for general characteristics of aggregates - Part 10088: Process and terminology for simplified petrographic identification TS 932 EN 3-1 / A3
TS 10449 Marble-Calcium carbonate based-Used as building and cladding stone
TS 10449 / T1 Marble-Calcium carbonate-based modification used as structure and cladding stone 1
TS 10449 / tst T2 Marble-Calcium carbonate-based modification used as building and cladding stone 2
TS 10834 Gabbro-used as a building and cladding stone
TS 10834 / T1 Modification used as gabbro-building and cladding stone 1
TS 10834 / tst T2 Gabro-modification used as a building and cladding stone 2
TS 10835 Andesite-Used as building and cladding stone
TS 10835 / T1 Andesite - Modification used as building and cladding stone 1
TS 10835 / tst T2 Andesite - Modification used as a building and cladding stone 2
Tests for general characteristics of aggregates - Part 10088: Process and terminology for simplified petrographic identification TS 932 EN 3-1 / A3
TS 10449 Marble-Calcium carbonate based-Used as building and cladding stone
TS 10449 / T1 Marble-Calcium carbonate-based modification used as structure and cladding stone 1
TS 10449 / tst T2 Marble-Calcium carbonate-based modification used as building and cladding stone 2
TS 10834 Gabbro-used as a building and cladding stone
TS 10834 / T1 Modification used as gabbro-building and cladding stone 1
TS 10834 / tst T2 Gabro-modification used as a building and cladding stone 2
TS 10835 Andesite-Used as building and cladding stone
TS 10835 / T1 Andesite - Modification used as building and cladding stone 1
TS 10835 / tst T2 Andesite - Modification used as a building and cladding stone 2
TS EN 12370 Natural stones - Test methods - Determination of resistance to salt crystallization
TS EN 12371 Natural stones - Test methods - Determination of resistance to frost
TS EN 12372 Natural stones - Test methods - Determination of bending strength under heavy load
TS EN 12440 Natural stones - Naming criteria
TS EN 13084-5 Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
TS EN 13373 Natural stones - Test methods - Determination of geometric properties of natural stone products
TS EN 14146 Natural stone test methods - Determination of dynamic elastic modulus (by measuring the basic resonance frequency)
TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor deposition
TS EN 14157 Natural stone - Determination of abrasion resistance
TS EN 14158 Natural stone test methods - Determination of breaking energy
TS EN 14205 Natural stone test methods - Determination of knoop hardness
TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment
TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression
TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus
TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient
TS EN 14617-1 Agglomerated stones - Test methods - Part 1: Determination of apparent density and water absorption
TS EN 14617-9 Agglomerated stones - Test methods - Part 9: Determination of impact resistance
TS EN 14617-11 Agglomerates - Test methods - Part 11: Determination of the coefficient of linear thermal expansion
TS EN 14617-15 Agglomerates - Test methods - Part 15: Determination of compressive strength
TS EN 14617-13 Agglomerated stones - Test methods - Part 13: Determination of electrical resistance
TS EN 14617-16 Agglomerates - Test methods - Part 16: Determination of dimensions, geometric properties and surface quality of modular tiles
TS EN 14617-8 Agglomerated stones - Test methods - Part 8: Determination of resistance to fixation (with dowels)
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN 15167-2 Ground blast furnace slag - For use in concrete, mortar and grout - Part 2: Conformity assessment
TS EN 15285 Stacked stones - Modular tiles for floor and stair covering (internal and external)
TS EN 15388 Agglomerated stones - Plates and sized products for toilets and kitchens
tst 1260 Carrier flooring bricks (participating in static work)
TS EN 13084-5 / AC Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
TS EN 1936 Natural stones - Test methods - Determination of actual density, apparent density, total and open porosity
TS EN 933-2 Tests for geometric properties of aggregates part 2: Determination of particle size distribution-Test sieves, screen sizes
TS EN 933-5 Tests for geometric properties of aggregates - Part 5: Determination of the percentage of crushed and crushed surfaces in coarse aggregates