Turkey's leading testing, inspection companies to you as unique accuracy, experienced experts in the field, all the standard tests below with superior inspection methods, we provide audit and certification.
TS EN 1015-2 Masonry mortar - Test methods - Part 2: Sampling from mortar stacks used in manufacturing and preparation for testing
TS EN 1015-6 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar
TS EN 1015-19 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar
TS EN 1015-11 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar
TS EN 1015-9 Masonry mortar - Test methods - Part 9: Determination of the processing and correcting time of fresh mortar
TS EN 13395-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 4: Application of repair mortars used in ceilings
TS EN 13813 Screed materials and floor screeds - Screed materials - Specifications and requirements
TS EN 13892-1 Screed materials - Test methods - part 1: Sampling, preparation and curing for experiments
TS EN 13892-2 Screed materials - Test methods - part 2: Determination of flexural and compressive strength
TS EN 13892-4 Screed materials - Test methods - part 4: Determination of abrasion resistance of Bca-by Bca method
TS EN 1015-18 Masonry mortar - Test methods - Part 18: Determination of water absorption coefficient of hardened mortar due to capillary effect
TS EN 1015-21 Masonry mortar - Test methods - Part 21: Determination of the compatibility of coarse plaster mortars made as one layer with the base materials
TS EN 13813 Screed materials and floor screeds - Screed materials - Specifications and requirements
TS EN 13892-1 Screed materials - Test methods - Part 1: Sampling, preparation and curing for experiments
TS EN 13892-2 Screed materials - Test methods - Part 2: Determination of flexural and compressive strength
TS EN 13892-4 Screed materials - Test methods - Part 4: Determination of abrasion resistance of Bca
TS EN 13892-5 Screed materials - Test methods - Part 5: Determination of abrasion resistance of screed material used as wear layer by means of rotary wheel
TS EN 13892-6 Screed materials - Test methods - Part 6: Determination of surface hardness
TS EN 13892-7 Screed materials - Test methods - Part 7: Determination of abrasion resistance of screed materials and floor coverings against rotating wheel
TS EN 13892-8 Screed materials - Test methods - Part 8: Determination of bond strength
TS EN ISO 10426-2 Oil and gas industry - Cements and materials for well cementing - Part 2: Tests of well cements (ISO 10426-2: 2003)
TS EN 13454-1 Binders, composite binders and factory made mixtures - Calcium sulphate based - Used as screed material - Part 1: Definitions and required properties
TS EN 14117 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the viscosity of cement based injection products
TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster
TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster
TS EN 480-5 Chemical additives - For concrete, mortar and grout - Test methods - Part 5: Determination of capillary water absorption
TS EN 480-12 Chemical additives - For concrete, mortar and grout - Test methods - part 12: Determination of alkali content
TS EN 1015-19 / A1 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar
TS EN 14647 / AC Calcium aluminate cement - Composition, properties and conformity criteria
TS 13353 Boron active belite cement - Definitions, composition, properties and conformity criteria
TS EN 1015-1 / A1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis)
TS EN 14246 / AC Gypsum elements - Used in suspended ceilings - Definitions, requirements and test methods
TS EN 196-7 Cement test methods - Part 7: Sampling and sample preparation methods from cement
TS EN 14566 + A1 Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods
TS EN 196-7 Cement test methods - Part 7: Methods of sampling and preparation of cement
TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers
TS EN 12808-4 Joint fillers - For tiles - Part 4: Determination of shrinkage
TS EN 15824 Exterior and interior plasters - Organic binder - Features
TS EN 196-6 Cement test methods - Part 6: Determination of fineness
TS EN 196-8 Cement test methods - Part 8: Heat of hydration - Solution method
TS EN 196-9 Cement test methods - Part 9: Heat of hydration - Adiabatic method
tkt 201184265 Wood based interior door frame
TS EN 14647 Cement - Calcium aluminate - Composition, properties and conformity criteria
TS EN 14647 / AC Cement - Calcium aluminate - Composition, properties and conformity criteria
TS 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades
TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers
TS EN 12859 Gypsum blocks - Definitions, requirements and test methods
TS EN 12808-4: 2009 / AC: 2011 Joint fillers - For tiles - Part 4: Determination of shrinkage
TS EN 197-1 Cement - Part 1: General cements - Composition, properties and conformity criteria
TS 13516 Determination of potential alkali reactivity of aggregates (mortar stick method)
TS 13518 Potential alkali reactivity of cement aggregate mixtures (mortar stick method)
TS EN 197-1 Cement - Part 1: General cements - Composition, properties and conformity criteria
TS EN 480-8: 2012 (EN) Chemical additives - Test methods for concrete, mortar and grout - Part 8: Determination of solids content
TS 13566 Cement-based adhesives - for thermal insulation board
TS EN 1015-6 / A1 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar
TS EN 1015-9 / A1 Masonry mortar - Test methods - Part 9: Determination of the processing and correction time of fresh mortar
TS EN 1015-10 / A1 Masonry mortar - Test methods - Part 10: Determination of the hollow dry unit volume of hardened mortar
TS EN 1015-11 / A1 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar
TS EN 1015-19 / A1 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar
TS EN 12808-3 Joint fillers - For tiles - Part 3: Determination of flexural and compressive strength
TS EN 12808-2 Joint fillers - For tiles - Part 2: Determination of abrasion resistance
TS EN 12808-4 Joint fillers - For tiles - Part 4: Determination of shrinkage
TS EN 12808-5 Joint fillers - For tiles - Part 5: Determination of water absorption
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS EN 1015-18 Masonry mortar - Test methods - Part 18: Determination of water absorption coefficient of hardened mortar due to capillary effect
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TS EN 13971 Carbonated calcification agents - Determination of reactivity - Potentiometric titration method with hydrochloric acid
TS EN 934-5 Chemical additives - For concrete, mortar and grout - Part 5: Shotcrete admixtures - Definitions, requirements, conformity, marking and labeling
TS EN 12808-1 Joint fillers - For tiles - Part 1: Determination of the chemical resistance of reaction resin mortars
TS 11052 Cement test methods - Determination of expansion - Autoclave method
TS EN 196-2 Cement test methods - Part 2: Chemical analysis of cement
TS EN 196-2 Cement test methods - Part 2: Chemical analysis of cement
tst 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades
TS EN 14496 Gypsum based adhesives - For composite sheets and gypsum sheets for thermal / sound insulation - Definitions, requirements and test methods
TS EN 15824 Exterior and interior plasters - Organic binder - Features
TS EN 1015-21 Masonry mortar - Test methods - Part 21: Determination of the compatibility of the coarse plaster mortars applied as a single layer with the base materials
TS EN 197-2 Cement- Part 2: Conformity assessment
TS EN 13279-2 Gypsum binders and building gypsum - Part 2: Test methods
TS EN 13395-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 1: Spatial determination of thixotropic mortars
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TSE K 236 Metal frame components used in cementitious particleboard systems - Definitions, requirements and test methods
TS 21 Cement - White portland cement - Composition, properties and conformity criteria
TS 1769 Sorel Cement (MgO-based binder) Intermediate
TSE K 308 Organic or inorganic binder coatings applied indoors
TSE CEN / TR 16632 Cement - Concentration calorimetry (ICC) at constant temperature for the determination of heat of hydration - New developments report and Recommendations
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 13963 Joint materials - For gypsum boards - Definitions, requirements and test methods
TS EN 14190 Gypsum board products - Recycled material - Definitions, requirements and test methods
TS EN 12878 Pigments for the coloring of cement and / or lime based construction materials - Properties and test methods
TSE CEN / TR 16632 Determination of heat of hydration of cement by isothermal conduction calorimeter (ICC): Reports and recommendations on recent developments
TSE CEN / TR 14245 Cement - EN 197-2 Guidance for conducting conformity assessment
TS EN 480-1 Chemical additives - For concrete, mortar and grout - Test methods - Part 1: Test concrete and test mortar for tests
TS EN 13279-2 Building gypsum and plaster - Part 2: Test methods
TS EN 197-2 Cement - Part 2: Conformity assessment
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 12859 Gypsum blocks - Definitions, requirements and test methods
TS EN 13963 Joint materials - For gypsum boards - Definitions, requirements and test methods
TS EN 14190 Gypsum boards - Recycled - Recipes, requirements and test methods
TS EN 14353 + A1 Metal bearings and connection profiles - Used in combination with gypsum boards - Definitions, requirements and test methods
TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications
TS EN ISO 10426-1 / AC Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications - Technical correction 1
TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods
TS EN 13892-3 Screed materials - Test methods - Part 3: Determination of wear resistance - Böhme
TSE K 471 Mold gypsum used in ceramic industry-Features and test methods
TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods
TSE K 415 Polyurethane Topcoat Alkyd Based - Two Component
TS 13687 Cement-based plaster - for thermal insulation board
TSE EN 16572 Conservation of cultural heritage - Glossary of technical terms related to masonry mortars, renders and plasters used in cultural heritage
TS EN 459-1 Building lime - Part 1: Definitions, specifications and eligibility criteria
TS EN 480-13 Chemical additives - For concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for tests of mortar chemical additives
TS EN 14216 Cement - Special cements - Very low temperature - composition, properties and conformity criteria
TS EN 15743: 2010 + A1 Super sulphate cements - Composition, properties and conformity criteria
TS 1475-2 Applications with gypsum board - Part 2: Rules for the application of curtain wall
TS 1475-3 Applications with plasterboard - Part 3: Rules for the application of suspended ceilings
TS 1475-4 Applications with plasterboard - Part4: Rules for the application of finishing works
TS 1475-1 Applications with gypsum board - Part 1: Partition wall application rules
TS EN 459-1 Building lime - Part 1: Definitions, specifications and conformity criteria
TS ISO 13007-4 Ceramic tiles - Sorbets and binders - Part 4: Test methods for sorbets
TS ISO 13007-5 Ceramic tiles - Sorbets and binders - Part 5: Requirements, test methods, conformity assessment and brief demonstration of waterproofing membranes applied as binders under the bonded ceramic tile
TS EN 13279-2 / D1 Building gypsum and plaster - Part 2: Test methods
TS EN 13914-1 Design, preparation and application of exterior and interior plasters - Part 1: Exterior plaster
TS EN 13914-2 Design, preparation and application of external and internal plasters - Part 2: Internal plasters
TS EN 196-1 Cement test methods - Part 1: Determination of strength
TS EN 196-10 Cement test methods - Part 10: Determination of water soluble chromium (vi) content of cement
TS EN 1015-12 Masonry mortar - Test methods - Part 12: Determination of adhesion strength of hardened plaster and masonry mortar to the substrate
TS EN 413-2 Cement - Mortar cement - Part 2: Test methods
TS EN 196-3 Cement test methods - Part 3: Determination of setting times and expansion
TS EN 998-2 Masonry mortar - Specifications - Part 2: Masonry mortar
TS EN 998-1 Masonry mortar - Specifications - Part 1: Rough and fine plaster mortar
tst 2017116141 Transport Principles of Bulk Cement
TS EN 196-3 Cement test methods - Part 3: Determination of setting times and expansion
TS EN 998-1 Masonry mortar - Specifications - Part 1: Rough and fine plaster mortar
TS EN 998-2 Masonry mortar - Specifications - Part 2: Masonry mortar
TS EN 1015-12 Masonry mortar - Test methods - Part 12: Determination of adhesion strength of hardened plaster and masonry mortar to the substrate
TS 13687 / tst T1 Cement based plaster - for thermal insulation board
TS EN 12004-1 Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of performance continuity, classification and marking
TS EN 12004-2 Adhesives for ceramic tiles - Part 1: Test methods
TS EN 16908 Cement and building lime - Environmental product declarations - Product category to complement EN 15804
TS 13779 Hardened concrete - Standard practice for petrographic inspection - Inspection under polarized microscope
TS 21 / Tadil G Çimento - White portland cement - Composition, properties and conformity criteria
TS 25 / T1 Natural pozzolan (used in cement and concrete) - Definitions, requirements and eligibility criteria
TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals
TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals
TS EN 196-8 Cement test methods - Part 8: Heat of hydration - Solution method
TS EN 196-9 Cement test methods - Part 9: Heat of hydration - Semi-adiabatic method
TSE CEN / TR 196-4 Cement test methods - Part 4: Determination of component content
TS EN 413-1: 2011 Mortar cement - Part 1: Composition, properties and conformity criteria
TS EN 459-2 Building lime - Part 2: Test methods
TS EN 459-2 Building lime - Part 2: Test methods
TS EN 480-6 Chemical additives - For concrete, mortar and grout - Test methods - part 6: Infrared analysis
TS EN 520 + A1 Gypsum boards - Definitions, requirements and test methods
TS EN 934-6 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 934-6 / A1 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 934-5 Chemical additives for concrete, mortar and grout - Part 5: Sprayed concrete admixtures - Definitions and characteristics, conformity, marking and labeling
TS EN 1015-1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis)
TS EN 1015-3 Masonry mortar- Test methods- Part 3: Determination of fresh mortar consistency (with spreading table)
TS EN 1015-4 Masonry mortar - Test methods - Part 4: Determination of fresh mortar consistency (using dip tip)
TS EN 1015-7 Masonry mortar - Test methods - Part 7: Determination of air content of fresh mortar
TS EN 1015-10 Masonry mortar - Test methods - Part 10: Determination of the dry bulk volume volume of the hardened mortar
TS EN 1015-17 Masonry mortar - Test methods - Part 17: Determination of water-soluble chloride content in fresh mortars
TS EN 1015-3 / A1 Masonry mortar - Test methods - Part 3: Determination of fresh mortar consistency (with spreading table)
TS EN 1015-11 / A1 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar
TS EN 1015-2 / A1 Masonry mortar - Test methods - Part 2: Sampling from mortar stacks used in manufacturing and preparation for testing
TS EN 1015-3 / A2 Masonry mortar - Test methods - Part 3: Determination of fresh mortar consistency (with spreading table)
TS EN 1015-6 / A1 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar
TS EN 1015-10 / A1 Masonry mortar - Test methods - Part 10: Determination of the hollow dry unit volume of hardened mortar
TS EN 1015-9 / A1 Masonry mortar - Test methods - Part 9: Determination of the processing and correction time of fresh mortar
TS EN 1015-17 / A1 Masonry mortar - Test methods - Part 17: Determination of water-soluble chloride content in fresh mortars
TS EN 1015-1 / A1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis)
TS EN 1347 tile adhesives - Determination of wettability
TS 3322 Concrete - Hardened concrete tests - Determination of length changes in cement mortar and concrete samples
TS 3322 Determination of length changes in cement mortar and concrete samples
TS 3322 Concrete - Hardened concrete tests - Determination of length changes in cement mortar and concrete samples
TS 3722 Construction, maintenance and application rules of perlite plaster and plaster mortars
TS 4447 Gypsum - ground (used in agriculture)
TS EN 4591 Building lime - Part 1: Definitions, specifications and conformity criteria
TS 10157 / Tadil G Cement - Sulfate resistant cement - Composition, properties and conformity criteria
TS EN ISO 10426-3 Steel products - Inspection documents - Information and recipes list
TS EN ISO 10426-4 Oil and gas industry - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement mortars at atmospheric pressure
TS EN ISO 10426-5 Oil and gas industry-Cements and materials for well cementing-Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications
TS EN ISO 10426-6 Oil and gas industry-Cements and materials for well cementing-Part 6: Methods for determination of statil gel strength of well cement formulations
tst EN ISO 10426-2 (Priority *) Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements
TS EN ISO 10426-2 / AC Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements
TS EN ISO 10426-2 / A1 Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements
TS 11051 Drilling cement-Manufacturing additives-General rules
TS 11669 Limestone (limestone) - used in lime manufacturing
TS EN 12190 Concrete structures - Products and systems for protection and repair - Test methods - Determination of compressive strength of repair mortar
TS EN 12808-2 Joint fillers - For tiles - Part 2: Determination of abrasion resistance
TS EN 12808-1 Joint fillers - For tiles - Part 1: Determination of the chemical resistance of reaction resin mortars
TS EN 12808-5 Joint fillers - For tiles - Part 5: Determination of water absorption
TS EN 12808-3 Joint fillers - For tiles - Part 3: Determination of flexural and compressive strength
TS 451 EN 12859 / tst A1 Gypsum blocks - Definitions, properties and tests and test methods
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS EN 13395-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 2: Determination of spreading in slurry or mortar
TS EN 13454-1 Binders, composite binders and factory made mixtures for calcium sulphate based screed materials - part 1: Definitions and characteristics
TS EN 13454-2 + A1 Binders, composite binders and ready mixes - Calcium sulfate based - For use on floor screeds - Part 2: Test methods
TS EN 13639 / AC Limestone - Determination of total organic carbon
TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster
TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster
TS EN 13815 Fiber reinforced prefabricated gypsum products - Definitions, requirements and test methods
TS EN 13888 Joint filler for tiles - Requirements, conformity assessment, classification and demonstration
TS EN 13892-6 Screed materials - Test methods - Part 6: Determination of surface hardness
TS EN 13892-8 Screed materials - Test methods - Part 8: Determination of bond strength
TS EN 13892-5 Screed materials - Test methods - Part 5: Determination of abrasion resistance of screed material used as wear layer against rotating wheel
TS EN 14209 Preformed gypsum board angle - Definitions, requirements and test methods
TS EN 14246 Gypsum elements - Used in suspended ceilings - Definitions, requirements and test methods
TS EN 14353 + A1 Metal bearings and connection profiles - Used in combination with gypsum boards - Definitions, requirements and test methods
TS EN 14496 Gypsum based binders - Composite sheets and gypsum sheets for heat / sound insulation - Definitions, requirements and test methods
TS EN 14647 Calcium aluminate cement - Composition, properties and conformity criteria
TS EN 14944-3 The effect of cementitious products on human consumption waters - Test methods - Part 3: Release of substances from factory-made cementitious products
TSE CEN / TR 15225 Masonry mortar - Designed - Guidance on factory production control for Ce marking (conformity verification system 2 +)
TS EN 15283-2 + A1 Fiber reinforced gypsum boards - Definitions, requirements and test methods - Part 2: Gypsum boards reinforced with cellulosic fibers
TS EN 15318 Design and implementation of gypsum blocks
TS EN 15319 General principles based on the design of fibrous plaster applications
TS EN 196-5: 2011 Cement test methods - Part 5: Pozzolanic property test in pozzolanic cements
TS EN 13318 Screed materials and screed application - Recipes
tkt 200769812 Anti-lime powder