Turkey's top quality inspection testing company, has been providing inspection and certification services. It provides test and audit certification services to all of the following standards.
TS EN 678 Gas and foam concrete-Dry density determination
TS EN 991 Gas concrete or lightweight aggregate porous concrete - Determination of pre-structured components
TS EN 1521 Determination of tensile strength of bending of lightweight aggregate porous concrete
TS EN 1351 Determination of tensile strength in bending of aerated concrete
TS EN 1355 Gas concrete or lightweight aggregate porous concrete - Determination of creep under pressure
TS EN 1170-6 Prefabricated concrete products-Glass fiber reinforced cement (CTT) test method-Part 6: Determination of water absorption and dry density by immersion in water
TS EN 1737 Prefabricated components made of aerated concrete and lightweight aggregate porous concrete - Determination of shear strength at welded joints of mesh and mesh reinforcement
TS EN 1741 Prefabricated components made of aerated concrete or lightweight aggregate porous concrete - Determination of shear strength against out-of-plane forces in joints between components
TS EN 1169 Prefabricated concrete products - General rules for factory production control of glass fiber reinforced cements
TS EN 12390-4 Concrete - Hardened concrete tests - Part 4: Compressive strength - Characteristics of test machines
TS EN 1877-1 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 1: Determination of epoxy equivalents
TS EN 1877-2 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 2: Determination of amine functions using the total number of bases
TS EN 772-6 Masonry and masonry products - Part 6: Determination of bending resistance of concrete masonry units
TS EN 772-14 Masonry units-Test methods-Section 14: Determination of moisture movement of concrete and artificial stone masonry units
TS EN 772-14 Masonry units - Test methods - Part 14: Determination of the moisture movement of concrete and artificial stone masonry units
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 3: Determination of spreading in repair concrete
TS 213-2 EN 13748-2 Terrazo tiles - For outdoor use
TS EN 12504-4 Concrete tests - Part 4: Determination of ultrasound transmission rate
TS EN 772-9 / A1 Masonry units - Test methods - Part 9: Determination of the net volume and percentage and net volumes of clay and lime sandstone masonry units by sand filling method
tst 1247 Concrete construction, casting and maintenance rules (under normal weather conditions)
TS 3323 Concrete - Preparation of pressure test specimens, accelerated spheres and tests
TS EN 13978-1 Precast concrete products - Precast concrete garages - Part 1: Garages formed by monolithic or room-sized parts
TS EN 12504-3 Concrete tests in buildings - Part 3: Determination of pulling load
TS EN 480-5 Chemical additives - For concrete, mortar and grout - Test methods - Part 5: Determination of capillary water absorption
TS EN 480-12 Chemical additives - For concrete, mortar and grout - Test methods - part 12: Determination of alkali content
TS EN 450-2 Fly ash - For use in concrete - Part 2
TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt"
TS EN 480-2 Chemical additives - For concrete, mortar and grout - Test methods - Part 2: Determination of setting time
TS EN 14845-2 Fibers - For use in concrete - Test methods - Part 2: Effect on concrete
TS EN 480-14 Chemical additives - For concrete, mortar and grout - Test methods - Part 14: Determination of the effect on the susceptibility of reinforcing steel to corrosion by potentiostatic electrochemical testing
TS EN 14991 Precast concrete products - Basic elements
TS EN 14843 Precast concrete products - Stairs
TS EN 14843 Precast concrete products - Stairs
TS EN 12794 + A1 Precast concrete products - Foundation piles
TS EN 1367-1 Tests for thermal and degradation properties of aggregates - Part 1: Determination of resistance to freezing and thawing
TS EN 1739 Prefabricated components made of aerated concrete or porous lightweight concrete - Determination of shear strength against joint forces with joints between components
TS EN 15361 Reinforced prefabricated components made of aerated concrete - Determination of the effect of the corrosion protection coating on the anchor capacity of the anchor rods in the transverse direction
TS EN 445 Sherbet - For pretension reinforcement - Test methods
TS EN 12794 + A1 / AC Precast concrete products - Foundation piles
TS EN 12737 + A1 Precast concrete products - Slabs for livestock
TS EN 934-1 Chemical additives - For concrete, mortar and grout - Part 1: General requirements
TS EN 15037-1 Precast concrete products - Gear laying systems - Part 1: Beams
TS EN 15422 Precast concrete products - Properties of glass fiber reinforcement material used in mortars and concretes
TS EN 14488-4 + A1 Shotcrete - Tests - Part 4: Determination of bond strength in cores by direct tensile strength
TS EN 934-1 Chemical additives - For concrete, mortar and grout - Part 1: Common requirements for additives
TS EN 12390-5 Concrete - Hardened concrete tests - Part 5: Determination of flexural strength of test specimens
TS EN 12350-1 Concrete - Fresh concrete tests - Part 1: Sampling
TS EN 12350-2 Concrete - Fresh concrete tests - Part 2: Slump test
TS EN 12350-3 Concrete - Fresh concrete tests - Part 3: Mid-term test
TS EN 12350-6 Concrete - Fresh concrete tests - Part 6: Density
TS EN 12350-7 Concrete - Fresh concrete tests - Part 7: Determination of air content - Pressure methods
TS EN 12390-6 Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of splitting test specimens
TS EN 13263-1 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria
TSE CEN / TR 15840 Conformity assessment of fly ash used in concrete - Guidelines for the application of EN 450-2
TS EN 12350-1 Concrete - Fresh concrete tests - Part 1: Sampling
TS EN 12350-2 Concrete - Fresh concrete tests - Part 2: Slump test
TS EN 12350-3 Concrete - Fresh concrete tests - Part 3: Mid-term test
TS EN 12350-4 Concrete - Fresh concrete tests - Part 4: Degree of compressibility
TS EN 12350-5 Concrete - Fresh concrete tests - Part 5: Spreading table test
TS EN 12350-6 Concrete - Fresh concrete tests - Part 6: Density
TS EN 12350-7 Concrete - Fresh concrete tests - Part 7: Determination of air content - Pressure method
TS EN 12390-2 Concrete - Hardened concrete tests - Part 2: Preparation and curing of test specimens to be used in strength tests
TS EN 12390-3 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 12390-5 Concrete - Hardened concrete tests - Part 5: Determination of flexural strength in test specimens
TS EN 12390-7 Concrete - Hardened concrete tests - Part 7: Determination of hardened concrete density
TS EN 12390-8 Concrete - Hardened concrete tests - Part 8: Determination of depth of water treatment under pressure
TS EN 12504-1 Concrete - Concrete tests in structure - Part 1: Core samples - Core drilling, inspection and determination of compressive strength
TS EN 480-10 Chemical additives - For concrete, mortar and grout - Test methods - Part 10: Determination of soluble chloride content in water
TS EN 14604 / AC Smoke alarm devices
TS EN 934-4 Chemical additives for concrete, mortar and grout - Part 4: Grout additives for prestressing steel - Definitions, specifications, conformity, marking and labeling
TS EN 12390-6 Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of splitting test specimens
TS EN 15304 Aerated concrete - Determination of resistance to freeze-thaw effect
TS EN 12350-8 Concrete - Fresh concrete tests - Part 8: Self-compacting concrete - Slump propagation test
TS EN 12350-9 Concrete - Fresh concrete tests - Part 9: Self-compacting concrete - V funnel test
TS EN 12350-11 Concrete - Fresh concrete tests - Part 11: Self-compacting concrete - Sieve separation test
TS EN 12350-12 Concrete - Fresh concrete tests - Part 12: Self compacting concrete - J ring test
TSE K 108 Asmolen blocks - Made of aerated concrete
TS EN 12350-8 Fresh concrete tests section 8: Self-compacting concrete- Sinking-Spreading test
TS EN 12350-9 Fresh concrete tests section 9: Self-compacting concrete- Sump-V funnel test
TS EN 12350-11 Fresh concrete tests section 11: Self-compacting concrete- Sinking-Screening test
TS 13508 Estimation of concrete strength by maturity method
TS 407 Concrete products - Flooring systems - suspended concrete block
TS EN 772-11 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, gas concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
TS EN 1858 + A1 Chimneys - Components - Concrete chimney blocks
TS EN 12390-3: 2009 / AC Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 445 Sherbet - For prestressed tendons - Test methods
TS EN 446 Grout - for prestressed tendons - Grouting
TS EN 447 Sherbet - For prestressed tendons - Basic requirements
TS 13519 Determination of length change in concrete due to alkali silica reaction
TS 13517 Determination of potential alkali silica reactivity of binder materials and aggregate mixtures (accelerated mortar stick method)
TS EN 491 Concrete roof tiles and fittings for roofing and wall covering - Test methods
TS EN 12390-3 / AC Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS 1261 Clay products - Flooring systems - Non-static clay block
TS EN 12504-3 Concrete tests in buildings - Part 3: Determination of pulling load
TS EN 12504-4 Concrete tests - Part 4: Determination of ultrasonic pulsed wave velocity
TS EN 12839 Precast concrete products - Fence elements
TS EN 14844: 2006 + A2: 2011 Prefabricated concrete products - Box lattices
TSE K 143 Clay masonry units with insulation layer
TS 13546 Concrete tests in buildings - Use of electromagnetic concrete thickness gauge
TS 13537 Test method for determination of sinking resistance of hardened concrete
TS EN 14630 Concrete structures - Products and systems for protection and repair - Test methods - Determination of carbonation depth in hardened concrete by phenolphthalene method
TS EN 13224: 2011 Precast concrete products - Threaded pavers
TS EN 15050 + A1 Precast concrete products - Bridge elements
TS 13540 Standard test method for corrosion potential of unprotected reinforcing steel in concrete
TSE K 163 Expanded polystyrene (eps) products - Flooring systems - Non-static eps block
TSE K 154 Thermal insulation board - For buildings - Ceramic foam based
TS EN 15050: 2007 + A1 Precast concrete products - Bridge elements
TS 13539 Standard test method for measuring concrete layer thickness and p-wave velocity using Pulse-Echo method.
TSE CEN / TR 15840 Conformity assessment of fly ash used in concrete - Guidelines for the application of EN 450-2
TS 13565 Insulated laminated sandwich lightweight units
TS 407 / T1 Concrete products - Flooring systems - Asmolene lightweight concrete block that does not participate in static work
TS 3440 Evaluation of water, soils and gases with harmful effects to concrete - Principles, limit values, sampling and analysis of water and soils
TS 2518 Test method for determination of Portland cement dosage in hardened concrete
TS 3262 Test method for the determination of abrasion resistance in concrete by sandblasting
TS 3455 Determination of permeability coefficient in concrete
tst 201391339 Concrete inspection application guide
TS 13567 Application guide for visual inspection of concrete in construction
TS 1261 / T1 Clay products - Flooring systems - Non-static clay block
TS 13586 Strength evaluation of existing reinforced concrete buildings
TS 13619 Guide for pre-repair evaluation of reinforced concrete structures
TS 13607 Loading tests of concrete structures-methods, test load size, test procedures and acceptance criteria
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 450-1 Fly ash - Used in concrete - Part 1: Description, specifications and conformity criteria
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TS 13620 Test method for determination of unit deformation in hardened concrete
tst 201391944 Guideline for non-destructive testing methods applied near the surface and used to assess concrete strength
TS 13610 Test method for determining the first superficial water absorption of concrete
TS 13632 Test method for measuring the dynamic modulus of elasticity
TS EN 12390-1 Concrete - Hardened concrete tests - Part 1: Shape, size and other properties of test specimens and molds
TS EN 12504-2 Concrete tests in buildings - Part 2: Non-destructive testing - Determination of the number of bounces
TS EN 13225 Precast concrete products - Structural bar elements
TS EN 13369 Precast concrete products - General rules
TSE CEN / EN 16443: 2013 EN 450-1: 2005 + A1 revision history: 2007 - Fly ash for concrete
TS 13631 Precast concrete products - Slab and stair cladding plates - Requirements
TS 3454 Concrete - Hardened concrete tests - Determination of creep under pressure
TS 10966 Liquid curing materials - Membrane forming - Applied to concrete surface - Specifications
TS 10967 Concrete tests-Curing agents applied on concrete surface-Determination of water retention
TS 10514 Mixing ratios and rules for the production of fiber-reinforced concrete
TS 10515 Reinforced Concrete-Steel wire-Bending strength test method
tst 3234 Bimsbeton construction rules, mixture calculation and test methods
TS 2511 Mixture calculation principles of lightweight concrete
TS 4106 Determination of water release percentage in fresh concrete
TS EN 12839 Precast concrete products - Fence elements
TS EN 15037-4: 2010 + A1 Precast concrete products - Gear laying systems - part 4: Expanded polystyrene (eps) blocks
TS EN 15037-4: 2010 + A1 Precast concrete products - Gear laying systems - Part 4: Expanded polystyrene (EPS) blocks
TS EN 15037-5 Precast concrete products - Gear laying systems - part 5: Lightweight blocks for simple formwork
TS 13543 Non-destructive testing (NDT) methods for reinforced concrete structures
TSE CEN / TR 16563 Principles of equivalent durability procedure
TS EN 12390-13 Hardened Concrete Tests - Part 13: Determination of modulus of elasticity under pressure
TS 13565 / T1 Sandwich lightweight masonry units with insulation layer
TS EN 680 Aerated concrete - Determination of drying shrinkage
TS EN 12390-1 Concrete - Hardened concrete tests - Part 1: Shape, size and other properties of test specimens and molds
TSE CEN / TR 16369 Use of control charts in concrete manufacturing
TSE CEN / TR 16349 Specification framework to avoid harmful Alkaline-Silica Reaction (ASR) in concrete
TS 13515 Complementary standard for the implementation of TS EN 206
TS EN 450-1 Fly Ash - Used in concrete - Part 1: Description, specifications and conformity criteria
TS EN 12504-2 Concrete tests in buildings - Part 2: Non-destructive testing - Determination of the number of bounces
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TS 13655 Masonry units - Specifications - Foam concrete masonry units
TSE CEN / TR 16639 k-value concept, equivalent concrete performance concept and use of equivalent performance concepts of combinations
TS 13685 On-site determination of compressive strength in structures and precast concrete components - Complementary standard for the application of TS EN13791
TS 13653 Test methods for the determination of in situ density of fresh and hardened concrete, including roller compacted concrete (RCC) by nuclear method
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN 14487-2 Shotcrete - Part 2: Application
TS EN 14488-1 Shotcrete - Tests - Sampling from fresh and hardened concrete
TS EN 14488-2 Shotcrete - Tests - Part 2: Compressive strength of new (young) shotcrete
TS EN 14488-5 Shotcrete - Tests - Part 5: Determination of energy absorption capacity in fiber-reinforced plate samples
TS EN 14488-6 Shotcrete - Tests - Part 6: Thickness of concrete on substrate
TS EN 14488-7 Shotcrete - Tests: Part 7: Fiber content of fiber reinforced concrete
TSE K 314 Foam concrete on-site casting, non-bearing wall elements - for buildings
TS EN 14488-3 Shotcrete - Tests - Part 3: Flexural strength of fiber reinforced beam specimens (Initial cracking, final and residual bending strengths)
TS EN 14488-4 + A1 Shotcrete - Tests - Part 4: Determination of bond strength in cores by direct tensile strength
TS EN 14889-1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and suitability
TS EN 480-1 Chemical additives - For concrete, mortar and grout - Test methods - Part 1: Test concrete and test mortar for tests
TS EN 14889-2 Fibers - For use in concrete - Part 2: Polymer fibers - Definitions, specifications and compatibility
TS EN 14651 + A1 Metal fiber concrete - Test method - Determination of tensile strength at bending (LOP)
TS EN 14845-2 Fibers - For use in concrete - Test methods - Part 2: Effect on concrete
TS EN 14845-1 Fibers - For use in concrete - Test methods - Part 1: Blank concretes
TS EN 14844: 2006 + A2 Precast concrete products - Box lattices
TS EN 12390-13 Hardened Concrete Tests - Part 13: Determination of secant modulus of elasticity under pressure
tst 201498522 Prefabricated reinforced foam concrete building elements
TSE CEN / TR 16349 Frame specification to prevent damage from alkali-silica reaction (ASR) in concrete
TSE CEN / TR 16369 Use of control charts in concrete manufacturing
TSE CEN / TR 16563 Principles of equivalent durability processes
TSE CEN / TR 16639 k-value concept, equivalent concrete performance concept and use of equivalent performance concepts of combinations
TS EN 13225 Precast concrete products - Structural bar elements
TS EN 13369 Precast concrete products - General rules
TS EN 13747 + A2 Precast concrete products - Slab plates for laying systems
TS 802 Concrete mix design calculation principles
TS EN 15258 Precast concrete products - Retaining wall elements
TS 13652 Spacers and support elements - For use in reinforced steel reinforcement - Features and performance requirements
TS EN 15304 Determination of freeze-thaw resistance of aerated concrete
tkt 201497679 Epoxy Resin Based Polymer Bonded Glass Fiber Reinforced Reinforcement Bar
TS EN 13224 Precast concrete products - Threaded pavers
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 15191 Precast concrete products - Classification of glass fiber reinforced concrete performance
TS EN 15422 Precast concrete products - Properties of glass fiber reinforcement material used in mortars and concretes
TS EN 15435 Precast concrete products - Normal and lightweight concrete curtain blocks - Product characteristics and performance
TSE K 367 Glass fiber reinforced polymer composite bars for concrete reinforcement
TSE K 274 Precast concrete sleeper - for low voltage, medium voltage and high voltage lines - Definitions, requirements and test methods
TS EN 15564 Precast concrete products - Resin bonded concrete - Requirements and test methods
TSE CEN / TR 15739 Precast concrete products - Concrete surfaces - Description
TS EN 15498 Precast concrete products - Concrete block blocks with wood chip - Product characteristics and performance
TS EN 13693 + A1 Precast concrete products - Special roof elements
TS EN 14721 + A1 Metal fiber concrete - Test method - Measurement of fiber content in fresh and hardened concrete
tst 13565 Insulated laminated sandwich lightweight units
TS 13729 Thermal insulation products for buildings - Gas concrete board - Specifications
TS EN 15037-1 / D1 Precast concrete products - Threaded flooring systems - Part 1: Beams
TS 3523 Determination of surface moisture content of concrete aggregates
TS EN 12390-11 Hardened concrete tests-Determination of concrete chloride resistance, one-way diffusion
TS EN 771-3: 2011 + A1 Masonry units - Specifications - section 3: Concrete masonry units (dense and light aggregate)
TS EN 771-4: 2011 + A1 Masonry units - Specifications - Part 4: Aerated concrete masonry units
TS EN 771-5: 2011 + A1 Masonry units - Specifications - Part 5: Artificial stone masonry units
TS EN 771-3 + A1 Masonry units - Specifications - Part 3: Concrete masonry units (Dense and light aggregate)
TS EN 771-4: 2011 + A1 Masonry units - Specifications - Part 4: Aerated concrete masonry units
TS EN 771-5: 2011 + A1 Masonry units - Specifications - Part 5: Artificial stone masonry units
TS EN 12390-11 Hardened concrete tests-Determination of resistance of concrete to chloride ions, one-way diffusion
TS 13565 / T2 Sandwich lightweight masonry units with insulation layer
TS 4203 Concrete - Fresh concrete tests - Determination of mixer efficiency
TS ISO 1920-10 Concrete tests-Part 10: Determination of static elastic modulus under pressure
tst 2015105379 Guidance for mass concrete design and determination of proportions
TS 13515 / T1 Complementary standard for the implementation of TS EN 206
TS 13565 Insulated laminated sandwich lightweight units
TS EN 16622 Silica calcium fume for concrete - Definitions, requirements and eligibility criteria
TSE CEN / TR 15728 Precast concrete elements - Design and use of studs for lifting and transporting elements
TS 13515 / T2 Complementary standard for the implementation of TS EN 206
TS EN 13230-5 Railway applications - Road - Concrete sleepers and supports - Part 5: Special elements
TS EN 13230-1 Railway applications - Railway - Concrete sleepers and supports - Part 1: General rules
TS EN 13230-2 Railway applications - Railway - Concrete sleepers and supports - Part 2: Prestressed monolithic sleepers
TS EN 13230-3 TS EN 13230-3: 2015 Railway applications - Road - Concrete sleepers and supports - Part 3: Reinforced twin sleepers
TS EN 13230-4 Railway applications - Road - Concrete sleepers and supports - Part 4: Pretension bearings for shears and cruisers
TS EN 14889-1 / D1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and compatibility
TS EN 12602 Prefabricated reinforced concrete elements
TS EN 206: 2013 + A1 Concrete - Specification, performance, manufacturing and conformity
TS EN 490 + A1 Concrete roofing tiles and fittings for roofing and wall covering - Product features
TSE CEN / TS 12390-9 Concrete - Hardened concrete tests - Part 9: Freeze-thaw resistance with de-icing salts - Scaling
tst 2017114870 (TSE K 274) Precast concrete sleeper - for low voltage, medium voltage and high voltage lines - Definitions, requirements and test methods
TS EN 12602 Prefabricated reinforced concrete elements
TS EN 12004-2 Adhesives for ceramic tiles - Part 1: Test methods
TSE K 545 Electromagnetic wave absorbing units - made of aerated concrete
TS EN 206: 2013 + A1 Concrete - Specification, performance, manufacturing and conformity
tst 407 Asmolen - Lightweight aggregate concrete block
TSE K 50 Cold patch bitumen mixture for asphalt pavement repair
TSE CEN / TR 196-4 Cement test methods - Part 4: Determination of component content
TS EN 206-1 / tst T Concrete - Part 1: Feature, performance, manufacturing
TS 213-1 EN 13748-1 / T1 Terrazo tiles - For indoor use
tst 213-2 EN 13748-2 / T2 Terrazo tiles - For outdoor use TS EN 446 grout - For prestressed reinforcement - Grouting
TS EN 447 Sherbet - For prestressed reinforcement - Basic requirements
TS EN 450-2 Fly ash - Used in concrete - Part 2: Conformity assessment
TS EN 451-2 Fly ash - Test method - Part 2: Determination of fineness by wet sieving
TS EN 451-1 Fly ash - Test method - part 1: Determination of free calcium oxide content
TS EN 480-14 Chemical additives - For concrete, mortar and grout - Test methods - part 14: Determination of the effect of the additive on the susceptibility of reinforcing steel to corrosion - Potentiostatic electrochemical test
TS EN 480-2 Chemical additives for concrete, mortar and grout-Test methods-Part 2: Determination of setting time
TS EN 480-6 Chemical additives - For concrete, mortar and grout - Test methods - part 6: Infrared analysis
TS EN 480-11 Chemical additives - For concrete, mortar and grout - Test methods - part 11: Determination of air gap properties in hardened concrete
TS EN 480-4 Chemical additives - For concrete, mortar and grout - Test methods - part 4: Determination of amount of perspiration in concrete
TS EN 679 Gas concrete - Determination of compressive strength
TS EN 680 Determination of gas concrete-drying shrinkage
TS EN 772-2 Masonry units - Test methods - Part 2: Determination of the percentage of void area of the concrete masonry units (by means of paper extraction)
TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units
TS EN 772-20 Masonry units - Test methods - Part 20: Determination of surface smoothness of masonry units made of aggregate, sand stone and natural stone
TS EN 772-11: 2011 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
TS EN 772-6 Masonry units - Test methods - Part 6: Determination of tensile strength of bending of concrete masonry units
TS EN 772-2 / A1 Masonry units - Test methods - Part 2: Determination of the percentage of the space area of the masonry units (by the method of paper tracing)
TS EN 772-20 / A1 Masonry units - Test methods - Part 20: Determination of surface smoothness in masonry units
TS EN 934-6 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 934-4 Chemical additives - For concrete, mortar and grout - Part 4: Chemical additives used in grout for prestressing tendons - Definitions, requirements, conformity, marking and labeling
TS EN 934-6 / A1 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 989 Determination of the adherence behavior of aerated concrete reinforcement bars by stripping test
TS EN 990 Aerated concrete and lightweight porous concrete - Verification of corrosion protection of reinforcement - Test methods
TS EN 992 Lightweight aggregate porous concrete - Determination of dry density
TS EN 1008 Concrete - Mixed water - Sampling, testing and determination of the suitability of water as concrete mixed water, including water recovered from processes in the concrete industry
TS EN 1170-1 Prefabricated concrete products-Glass fiber reinforced cement (ctç) test method - Part 1: Measurement of matrix consistency, "slamp test" method
TS EN 1170-2 Prefabricated concrete products-Glass fiber reinforced cement test method - Part 2: Measurement of fiber content in fresh ctç "washing test
TS EN 1170-3 Prefabricated concrete products-Glass fiber reinforced cement (ctç) test method - Part 3: Measurement of fiber content of spray ctc
TS EN 1170-4 Prefabricated concrete products - Glass fiber reinforced cement (CTT) test method - Part 4: Determination of flexural strength "simple flexural test" method
TS EN 1170-5 Prefabricated concrete products-Glass fiber reinforced cement (ctc) test method - Part 5: Determination of flexural strength "full flexural test" method
TS EN 1170-7 Prefabricated concrete products-Glass fiber reinforced cement test method - Part 7: Measurement of the greatest dimensional changes due to moisture
TS 1247 Concrete construction, casting and maintenance rules (under normal weather conditions)
TS 1248 Concrete preparation, casting and maintenance rules - In abnormal weather conditions
TS 1248 Concrete construction, casting and maintenance rules -In abnormal weather conditionsTS EN 1352 Gas concrete or lightweight aggregate porous concrete-Determination of static elasticity modulus under pressure
TS EN 1353 Determination of gas concrete-Moisture content
TS EN 1354 Porous lightweight concrete - Determination of compressive strength
TS EN 1356 Gas concrete or lightweight aggregate porous concrete - Performance testing of pre-reinforced reinforced components under lateral loads
TS EN 1367-1 Tests for the determination of thermal and decomposition properties of aggregates - part 1: Determination of resistance to freezing and thawing
tst EN 1520 / AC: 2003 (Priority 2) Prefabricated reinforced concrete components - Made of porous lightweight concrete
TS EN 1543 Concrete structures - Products and systems for protection and repair - Test methods - Determination of tensile strength increase in polymers
TS EN 1738 Reinforced components made of aerated concrete - Determination of stresses in reinforcement under no load
TS EN 1739 Prefabricated components made of aerated concrete or lightweight aggregate, porous concrete - Determination of shear strength in joints between components against forces in joint plane
TS EN 1740 Prefabricated reinforcing components made of aerated concrete or lightweight aggregate porous concrete - Performance test on components subjected to loads in the longitudinal direction predominantly (vertical components)
TS EN 1742 Prefabricated components made of aerated concrete or lightweight aggregate porous concrete - Determination of shear strength between different layers of multilayer components
TS EN 1881 Concrete structures - Products and systems for protection and repair - Inspection methods - Pull-out test method for anchoring products
tst 2941 Determination of unit weight, yield and air content in fresh concrete by weight method
TS 2987 Determination of setting time of concrete by measuring penetration resistance
TS 2987 Determination of setting time in concrete
tst 3234 Bimsbeton construction rules, mixture calculation and test methods
tst 3260 Determination of approximate concrete strength by concrete surface hardness
TS 3261 Determination of the amount of air in fresh concrete by volume method
TS 3323 Preparation of concrete pressure test specimens, accelerated curing and compressive strength test
tst 3449 Determination of strength factor in concrete under rapid freezing and thawing conditions
TS ISO 1920-8: 2009 Concrete tests - Part 8: Determination of drying shrinkage of concrete for samples prepared on site or in laboratory
tst 3455 Method of determination of permeability coefficient in concrete
TS 3505 Prefabricated concrete canal saddles
TS 3505 / T1 Prefabricated reinforced concrete canal saddles
TS 3528 Aggregate - Used in concrete - Determination of light material
TS 3531 Prefabricated reinforced concrete canals
TS 3531 / T1 Prefabricated reinforced concrete canals
TS 3540 Prefabricated reinforced concrete duct sealing gaskets
TS ISO 3648 / cor 1 Aviation fuels - Net specific energy forecast; Technical printing error 1
TS ISO 3648 Aviation fuels - Net specific energy forecast
TS 3683 Prefabricated reinforced concrete canal stands and foundation blocks
TS EN 4131 / AC Aerospace series - Bolts, normal hex head, coarse tolerant thread, medium length thread, made of heat-resistant nickel-based alloy, with aluminum iv coated - Classification: 1250 mpa (at ambient temperature) / 425 ° c
tst 7044-1 ISO 4463-1 Building measurement methods - Specifying boundaries and measuring - Part 1: Planning and organization, measuring procedures, acceptance criteria
tst 4834 Concrete related terms
TS 5893 ISO 3893 Concrete - Classification according to compressive strength
tst 10465 Concrete test methods - Sampling of hardened concrete in building and structural components and determination of compressive strength (destructive method)
TS 11553 Syenite - used as building and cladding stone
TS 11553 / T1 XenUM-Modification used as a building and cladding stone 1
TS 11746 Concrete chemical additives - Concrete antifreeze (fresh concrete and mortar frost protection agent in cold weather)
TS EN 12190 Concrete structures - Products and systems for protection and repair - Test methods - Determination of compressive strength of repair mortar
TS EN 12269-2 Determination of bonding behavior between reinforcing steel and aerated concrete - By beam test - Part 2: Long term test
TS EN 12269-1 Determination of bonding behavior between reinforcing steel and aerated concrete by "beam test" part 1: Short term test
TS EN 12350-10 Concrete - Fresh concrete tests - Part 10: Self compacting concrete - L box test
TS EN 12350-10: 2010 Fresh concrete tests section 10: Self-compacting concrete- Sinking-L box test
TS EN 12350-12: 2010 Fresh concrete tests section 12: Self-compacting concrete- Sinking-J ring test
TS EN 12350-4 Concrete - Fresh concrete tests - Part 4: Degree of compressibility
TS EN 12350-5 Concrete - Fresh concrete tests - Part 5: Spreading table test
TS EN 12390-3 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 12390-7 Concrete - Hardened concrete tests - Part 7: Determination of hardened concrete density
TS EN 12390-8 Concrete - Hardened concrete tests - part 8: Determination of the depth of water treatment under pressure
TS EN 12390-2 Concrete - Hardened concrete tests - Part 2: Preparation and curing of test specimens to be used in strength tests
TS EN 12390-6 / tstAC Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of test specimens in splitting
TS EN 12390-3 / tst AC: 2011 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 12504-1 Concrete - Concrete tests in building - Part 1: Core samples - Core drilling, inspection and determination of compressive strength
TS 12596 Armor steel - Casting homogeneous
TS EN 12636 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adherence of concrete to concrete
TS EN 12737 + A1 Precast concrete products - flooring plates for livestock
TS EN 12794 + A1 Precast concrete products - Foundation piles
TS EN 12843 Precast concrete products - Poles and columns
TS EN 13198 Precast concrete products - Urban furniture and garden products
TS EN 13263-2 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria
TS EN 13263-1 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria
TS ISO 13543 Copper, lead and zinc sulphide concentrates - Calculation of metal mass in batch
TS EN 13577 Concrete - Chemical effects - Determination of harmful carbon dioxide in water
TS EN 13581 Concrete structures - Products and systems for protection and repair - Test methods - Determination of mass loss after freeze thawing of hydrophobic impregnated and sliced concrete under salt pressure
TS EN 13693 + A1 Precast concrete products - Special roof elements
TS EN 13747 + A2 Precast concrete products - Slab plates for laying systems
TS 213-1 EN 13748-1 Terrazo tiles - For indoor use
TS 213-2 EN 13748-2 / T1 Terrazo tiles - For outdoor use
TS EN 13978-1 Precast concrete products - Precast concrete garages - Part 1: Requirements for single-piece or monolithic reinforced concrete garages
TS EN 14068 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water tightness of injection filled cracks
TS EN 14474 Precast concrete products - Concrete using wood chips as agraga - Required properties and test methods
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN 14487-2 Shotcrete - Part 2: Application
TS EN 14488-1 Shotcrete - Tests - Sampling from fresh and hardened concrete
TS EN 14488-2 Shotcrete - Tests - Part 2: Compressive strength of new (young) shotcrete
TS EN 14488-3 Shotcrete - Tests - Part 3: Flexural strength of fiber reinforced beam specimens (initial crack, final and residual bending strengths)
TS EN 14488-5 Shotcrete - Tests - Part 5: Determination of energy absorption capacity in fiber-reinforced plate samples
TS EN 14488-6 Shotcrete - Tests - Part 6: Thickness of concrete on the base
TS EN 14488-7 Shotcrete - Tests - Part 7: Fiber content in fiber-reinforced concrete
TS EN 14649 Precast concrete products - Test method - Determination of the strength of cement and glass fiber in concrete (hot test)
TS EN 14650 Precast concrete products - General rules for factory production control of metal fiber concrete
TS EN 14651 + A1 Metal fiber concrete - Test method - Determination of tensile strength at bending (loc limit, residual)
TS EN 14721 + A1 Metal fiber concrete - Test method - Measurement of fiber content in fresh and hardened concrete
TS EN 14845-1 Fibers - Used in concrete - Test methods - Part 1: Blank concretes
TS EN 14889-1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and suitability
TS EN 14889-2 Fibers - For use in concrete - Part 2: Polymer fibers - Definitions, specifications and compatibility
TS EN 14991 Precast concrete products - Basic elements
TS EN 15037-1 Precast concrete products - Gear laying systems - Part 1: Beams
TS EN 15037-2 + A1 Precast concrete products - Threaded laying systems - Part 2: Concrete blocks
TS EN 15037-3 + A1 Precast concrete products - Gear laying systems - Part 3: Clay blocks
TS EN 15191 Precast concrete products - Classification of glass fiber reinforced concrete performance
TS EN 15258 Precast concrete products - Retaining wall elements
TS EN 15435 Precast concrete products - Normal and lightweight concrete curtain blocks - Product characteristics and performance
TS EN 15498 Precast concrete products - Concrete chipboard curtain blocks - Product characteristics and performance
TS EN 15564 Precast concrete products - Resin bonded concrete - Requirements and test methods
TSE CEN / TR 15739 Precast concrete products - Concrete surfaces - Description
TS 13473 Concrete pipes and fittings - Dn 1750 larger than mm
TSE K 118 Precast concrete elements - Quality management systems