Building Elements Our company, which performs testing, auditing and certification services, meets all of the following standards.
TS EN 501 Roofing sheets-Metal-Fitting on the roof-Made of zinc plate-Features
TS EN 1522 Window, door, roller shutter, roller shutter - Bullet resistance - Properties and classification
TS EN 1933 External awnings - Resistance to water flow load - Test method
TS EN 1192 Doors - Classification according to strength properties
TS EN 12046-2 Operating forces - Test methods - Part: 2 doors
TS EN 12154 Curtain walls - Water impermeability - Performance requirements and classification
TS EN 12208 Doors and windows - Waterproofing - Classification
TS EN 12219 Doors - Climate effects - Characteristics and classification
TS EN 1529 Door leaves - Height, width, square - Rules for granting tolerance
TS EN 504 Roofing sheets - Metal - Fits all - Copper sheets -
TS EN 846-10 Masonry - Auxiliary components - Test methods - Part 10: Load capacity and load-displacement properties of cantilever holders
TS EN 846-3 Masonry - Auxiliary components - Test methods - Part 3: Determination of the shear load capacity of pre-welded horizontal joint reinforcement welds
TS EN 1121 Doors - Working in two separate environments - Test method
TS EN 12056-3 Drainage systems - Indoor - Part 3: Design and calculation of terrace drainage
TS EN 12155 Curtain walls - Waterproofing - Laboratory tests under static pressure
TS EN 12310-2 Flexible sheets for waterproofing - Determination of tear resistance - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 12489 Doors - Industrial, commercial and garage doors - Resistance to water penetration - Test method
TS EN 12604 Doors - Industrial, commercial and garage doors - Mechanical aspects - Specifications
TS EN 12605 Doors - Industrial, commercial and garage doors - Mechanical aspects - Test methods
TS EN 12056-4 Drainage systems - Indoor - Part 4: Design and calculation of waste water pumping stations
TS EN 12154 Curtain walls - Waterproofing - Performance requirements and classification
TS EN 12219 Doors - Climate effects - Features and classification
TS EN 12605 Doors - Used in industrial and commercial buildings and garages - Mechanical aspects - Test methods
TS EN 12152 Curtain walls - Air permeability - Performance requirements and classification
TS EN 13051 Curtain walls - Water tightness - On-site testing
TS EN 12833 Roof windows and rotating shutters: Resistance to snow load - Test method
TS ISO 4736 Fire tests - Small chimneys - Test at elevated temperatures
TS EN 12833 Roller shutters for conservatories and lightings - Resistance to snow loads - Test methods
TS EN 13115 Windows - Classification of mechanical properties - Tensile, torsional and operating forces
TS EN 13116 Curtain walls - Wind load resistance - Performance rules
TS EN 13123-1 Windows, doors and shutters - Explosion resistance - Properties and classification - Part 1: Impact tunnel
TS EN 13124-1 Windows, doors and shutters - Explosion resistance - Test method - Part 1: Impact tunnel
TS EN 13125 Shutters and blinds - Additional thermal resistance - Determination of finished air permeability class
TS EN 13213 Hollow slabs
TS EN 495-5 Flexible sheets for waterproofing - Determination of low temperature foldability - Part 5: Plastic and rubber sheets for waterproofing on roofs
TS EN 1107-2 Flexible sheets for waterproofing - Determination of dimension stability - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 12444 Doors and gates -Used in industrial and commercial spaces and garages -Resistance to wind load -Exercise and calculation
TS EN 12445 Doors and gates for commercial establishments and garages - Industrial construction - Safety of use of power operated doors - Test methods
TS EN 12453 Doors and gates for commercial and industrial premises - Industrial building
TS EN 1296 Flexible sheets for waterproofing - Bituminous plastic and rubber sheets used in roofs - Artificial aging method by long-term exposure to high temperatures
TS EN 13051 Curtain walls - Water impermeability - Site test
TS EN 12152 Curtain walls-Air permeability-Performance characteristics and classification
TS EN 1933 External awnings - Load resistance due to water collection - Test method
TS EN 951 Door leaves - Method for measuring height, width, thickness and edge steepness
TS ISO 13785-1 Fire reaction tests for building façades and additional coatings - Part 1: Medium-scale test
TS ISO 13785-2 Fire reaction tests for building façades and additional coatings - Part 2: Large-scale test
TS EN 13502 Chimneys - Requirements and test methods for clay / ceramic chimney heads
TS EN 60335-2-83 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2 - 83: Particular requirements for electrically heated strainers for roof drainage
TS EN 12400 Windows and doors suitable for pedestrians - Mechanical durability - Requirements and classification
TS EN 13049 Windows - Light and severe mass impact - Test method, safety requirements and classification
TS EN 13330 Louvers-Hard mass impact-Test method
TS EN 13502 Chimneys - Characteristics and test methods for clay / ceramic chimney heads
TS EN 60335-2-83 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-83: Particular requirements for electrically heated strainers for roof drainage
TS EN 12365-2 Building equipment - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 2: Test methods for linear clamping force
TS EN 12365-3 Building hardware - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 3: Test method for determination of deformation recovery
TS EN 12365-4 Building hardware - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 4: Test method for the determination of accelerated post-aging strain recovery
TS EN 12412-2 Thermal performance of windows, doors and shutters-Determination of thermal conductivity by hot box method 2: Framework
TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal permeability by hot box method 4: Movable louver boxes
TS EN 12412-2 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 2: Frames
TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 4: Roll louver boxes
TS EN 13330 Shutters - Hard mass impact - Test method
TS EN 12519 Windows and doors for pedestrians - Terms and descriptions
TS EN 14608 Windows - Determination of resistance to sag force
TS EN 14609 Windows - Determination of resistance to static torsion
TS EN 12951 Prefabricated roof accessories - Fixed roof ladders - Product specifications and test methods
TS EN 13216-1 Chimneys - Test methods for system chimneys - General test methods
TS EN 14716 Stretched ceilings - Required properties and test methods
TS EN 1462 Cantilever clamps - for rain gutters - Requirements and tests
TS EN 12951 Ready-made accessories for roofs - Fixed roof ladders - Product specifications and test methods
TS EN 14716 Tension ceilings - Requirements and test methods
TS EN 13069 Chimneys - Clay / ceramic exterior walls for system chimneys - Requirements and test methods
TS EN 13084-4 Industrial chimneys - Free standing - Part 4: Brick cladding - Design and implementation
TS EN 1462 Cantilever clamps -For rain gutters -Features and tests
TS EN 517 Auxiliary equipment for roofs - Roof hooks
TS EN 516 Ready-made accessories for roofs -Roof transport facilities -Walking path, wide and narrow steps
TS EN 517 Ready-made accessories for roofs - Roof hooks
TS EN 13063-1 + A1 Chimneys - Chimneys with clay / ceramic lining - Part 1: Rules and test methods for resistance to soot ignition
TS EN 1634-3 / AC Fire resistance test-Doors and shutters-Part 3: Smoke control doors and shutters
TS EN 1806 Chimneys - Clay / ceramic blocks for single-row chimneys / features and test methods
TS EN 13084-4 / AC Chimneys - Free standing - Part 4: Brick lining - Design and application
TS 1904 / tst T1 Door frames - Sheet steel
TS EN 14220 Wood and wood-based material in exterior windows, exterior door sashes and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based material in interior windows, interior door sashes and interior door frames - Requirements and features
TS EN 13084-1 Industrial chimneys - Free standing - Section 1: General features
TS EN 60335-2-97 Safety regulations - Part for household electrical appliances 2-97: Particular requirements for drives for winding shutters, awnings, sun visors and similar equipment
TS EN 14024 Metal profiles - Thermal barrier - Mechanical performance - Requirements, evidence and tests for evaluation
TS EN 14024 Metal profiles - Thermal barrier - Mechanical performance - Requirements, evidence and tests for evaluation
TS EN 1997-2 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)
TS EN 13063-3 Chimneys - System chimneys with clay or ceramic fume lining - Properties and test methods for air
TSE CEN / TS 15680 Prefabricated wooden stairs - Mechanical test methods
TS EN 1997-2 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)
TS EN 13063-3 Chimneys - System chimneys with clay or ceramic fume lining - Properties and test methods for air
TSE CEN / TS 15680 Prefabricated wooden stairs - Mechanical test methods
TS EN 14963 Roofing - Continuous plastic roof windows with or without collar - Classification, requirements and test methods
TS EN 14964 Rigid substrates - for discontinuous roofing materials - Recipes and specifications
TS EN 15287-2 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for appliances integrated into the room
TS EN 60335-2-10 / A1 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-10: Particular requirements for floor maintenance machines and wet scrubbing machines
tst 11386 Chimneys - for residential buildings and similar buildings - Design and construction rules
TS EN 12978 + A1 Doors and gates - Used in industrial and commercial spaces and garages - Safety devices for power-operated gates and entrances - Rules and test methods
TS EN 60335-2-83 / A1 Safety regulations - For household and similar electrical appliances - Part 2-83: Particular requirements for electrically heated sieves for roof drainage
TS EN 12635 + A1 Doors - Used in industrial and commercial buildings and garages - Installation and operation
TS EN 12635 + A1 Doors - used in industrial and commercial buildings and garages - installation and use
TS EN 1856-2 Chimneys - Requirements for metal chimneys - Part 2: metal chimney linings and chimney connection pipes
TS EN 60311 / A2 Electric irons - For household and similar use - Methods for measuring performance
TS EN 60335-2-97 / A11 Safety regulations - Part for household and similar electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and the like
TS EN 60335-2-97 / A2 Safety regulations - Part for household and similar electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and the like
10077-1 / AC Thermal performance of windows, doors and louvers - Calculation of heat conduction - Part 1: Simplified method
TS EN 1856-1 Chimneys - Rules for metal chimneys - Part 1: Ready chimney components
TS EN 1856-1 Chimneys - Requirements for metal chimneys - Part 1: Chimney system components
TS EN 1859 + A1 Chimneys - Metal chimneys - Test methods
TS EN 1634-3 / AC Fire resistance and smoke control tests - Openable windows and building hardware elements - Part 3: Smoke control test for doors and rolling shutters
TS EN ISO 12567-1 Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 1: Complete windows and doors
TS EN 15080-12 Extended application of the results of fire resistance tests-Part 12: Load-bearing masonry walls
TS EN ISO 11925-2 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding
TS EN 15269-10 Comprehensive application of results from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 10: Fire resistance of steel roller shutter assemblies
TS EN 1627 Door sets for pedestrians, windows, curtain walls, balustrades and shutters - Burglar resistant - Rules and classification
TS 12655 Steel doors, burglar resistant
TS EN ISO 13079 Laboratory glass and plastic materials - tubes for measuring erythroycin sedimentation rate by Westerngren method
TS EN 15287-2 Chimneys - Design, installation and commissioning of chimneys - part 2: Chimneys for devices integrated into the room
TS EN 15287-1 + A1 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-chamber heating devices
TS EN 13063-3 Chimneys - Chimney systems with clay / ceramic fume lining - Part 3: Test methods and specifications for air smoke duct chimney systems
TS EN ISO 10077-2 Thermal performance of doors, windows and shutters - Calculation of thermal conduction - Part 2: Numerical method for safes
TS EN 1457-1 Chimneys - Chimneys with smoke lining clay / ceramics - Part 1: Fume duct linings operating in dry conditions - Requirements and test methods
TS EN 1457-2 Chimneys - Chimneys made of clay / ceramic with smoke lining - Part 2: Wet lining under wet conditions - Requirements and test methods
TS EN 1024 Roof tiles made of clay - Determination of non-continuous geometric properties
TS EN 594 Wooden structures - Test methods - Durability and durability of wooden frame wall plates against loads parallel to the planes
TSE K 170 Hinged and sliding mosquito nets for windows and doors
TS EN 1856-2 Chimneys - Requirements for metal chimneys - Part 2: Metal chimney linings and chimney connection pipes
TS EN 1634-1 Fire resistance and smoke control tests for doors and rolling shutters, windows and elements of building hardware - Part 1: Fire resistance test for doors and rolling shutters and opening windows
TS EN 1634-2 Fire resistance and smoke control tests for doors, rolling shutters and window fittings and building hardware elements - Part 2: Test for characterizing fire resistance for building hardware elements
TS EN 16005 Motor-driven door sets - For pedestrians - Safety in use - Requirements and test methods
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 13084-7 Chimneys - Free standing - Section 7: Technical specifications for cylindrical steels for single-walled steel chimneys and steel linings
TS EN 14992 + A1 Precast concrete products - Wall elements
tst 12655 Steel doors - burglar resistant
TS EN 1858 + A1 Chimneys - Components - Concrete chimney blocks
10077-2 / AC Thermal performance of doors, windows and louvers - Calculation of thermal conductivity - Part 2: Numerical methods for frames
TS EN 846-5 Masonry - Auxiliary components - Test methods - Part 5: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (double test)
TS EN 846-6 Masonry - Auxiliary components - Test methods - Part 6: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (single-end test)
TS EN 15269-2 Application of test results for openable window assemblies, fire resistance and / or smoke control including extended doors, shutters and building hardware elements - Part 2: fire resistance of hinged and pivoted steel door sets
TS EN 15254-7 Extended application of results from fire resistance tests - Non-load-bearing ceilings - Part 7: Metal sandwich panel construction
TS EN 1191 Windows and doors - Resistance to repeated opening and closing - Test method
TS EN 15269-3 Extended application of test results for fire resistance and / or smoke control for doors, shutters and openable window components, including elements of building equipment - Part 3: Fire resistance of hinged or revolving wooden door sets and openable wooden frame windows
TS EN 14024 Metal profiles - Thermal insulation - Mechanical properties - Requirements assessment and tests
TS EN 14024 Metal profiles - Thermal insulation - Mechanical properties - Requirements assessment and tests
TS EN 12211 Oil, petrochemical and natural gas industry - Spiral surface heat exchangers
TS EN 594 Timber - Test methods - Strength and durability of wooden framed panels against loads parallel to the planes
TS EN 12428 Doors - Used in industrial and commercial buildings and garages - Thermal conductivity - Data required for calculation
TS EN 502 Roofing sheets - Metal - Fully fitted - Stainless steel sheet -
TS EN 505 Roofing sheets-Metal-Fitting-Steel plate-Features
TS EN 1859 + A1: 2013 Chimneys - Metal chimneys - Test methods
TS 13630 Lifts - F90 Class fire resistant sliding doors
tst 1905 Prefabricated wooden doors
TS EN 13741 Thermal performance acceptance tests of mechanical airflow series wet cooling towers
TS 1905 Prefabricated wooden doors
tst 1904 Door frames - Sheet steel
tst 2510 Masonry walls calculation and construction rules
TS EN 14241-1 Chimneys - Elastomeric seals and elastomeric seals - Material requirements and test methods - Part 1: Seals used in chimney linings
TS EN 14297 Chimneys - Freeze-thaw resistance test methods for flue products
TS EN 1366-5 Fire resistance tests for service installations - Part 5: Service channels and gaps
TS EN 1932 Exterior blinds and shutters - Resistance to wind loads - Test method and performance conditions
TS EN 14076 Wooden stairs - Terminology
TSE CEN / TS 16459 Fire resistance of roof and roof coverings - Extended application of test results in CEN / TS 1187
TS EN 651 Elastic floor coverings - Polyvinyl chloride (pvc) - Foam backing - Specifications
TS EN 14241-1 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals used in flue linings
TS EN 16240 Light-emitting solid solid polycarbonate (PC) sheets for interior and exterior use on roofs, walls and ceilings-Requirements and test methods
TS EN 14759 Louvers - Acoustic insulation for airborne sound - Demonstrating performance
TS EN 1457-1 Chimneys - Chimneys with clay / ceramic fume lining - Part 1: Fume lining working in dry conditions - Requirements and test methods
TS EN 13823 + A1 Fire reaction tests for construction products - Construction products other than floors exposed to thermal effects with a single combustion element
TS EN 1457-2 Chimneys - Chimneys with clay / ceramic fume lining - Part 2: Smoke lining working in wet conditions - Rules and test methods
tst EN 1997-2 Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)
TS EN 1997-2 / tst AC Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)
TS EN 13964 Suspended ceilings - Requirements and test methods
TS EN 1634-1 Fire resistance tests-Doors and shutters-Part 1: Fire doors and shutters
TS EN 1364-3 Fire resistance tests for non-live components - Part 3: Curtain walls - Full layout
TS EN 15254-6 Non-load-bearing walls-Expanded application of the results of fire resistance tests Part 6: Curtain Wall
TS EN 13120 + A1 Interior blinds - Performance requirements including safety
TS EN 16433 Interior blinds - Choking hazards Protection - Test methods
TS EN 16434 Interior blinds - Choking hazards Protection - Requirements and test methods for safety devices
TS EN 1364-4 Fire resistance tests of load-bearing elements - Part 4: Façade - Part configuration
tst prEN 14351-2 Windows and doors - Product standard, performance characteristics - Part 2: Interior doors ready for pedestrian passage - Without resistance to fire and / or smoke leak characteristics
TS 103 Bituminous primer for roofing, moisture insulation and waterproofing
TS EN 607 Rain gutters and fittings-Made of PVC-U-Recipes-Features and tests
TS EN 13084-7 Chimneys - Free standing - Part 7: Technical characteristics of cylindrical steel products for single walled steel chimneys and steel linings
TSE K 260 Shutter profiles made of rigid polyvinyl chloride (PVC-U)
prEN 14351-2 Windows and doors - Product standard, performance characteristics - Part 2: Interior doors ready for pedestrian passage - No resistance to fire or smoke leak characteristics
TS EN 508-1 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 1: Steel
TS EN 14471 + A1 Chimneys - Smoke path plastic lined chimney systems - Rules and test methods
TSE K 317 Modular construction systems - Modular cabins made of glass fiber reinforced polyester material that can be installed and removed on site
TS EN 16481 Wooden stairs - Structural design - Calculation methods
tst 13630 Lifts - F90 Class fire resistant sliding doors
TSE CEN / TR 16676 Loss of energy in industrial doors
TS EN 16034 Pedestrian door sets, industrial, commercial, garage doors and opening windows - Product standard, performance and characteristics - Fire resistance and / or smoke control features
TS EN 15659 Safe storage units - Classification and test methods for fire resistance - First fire storage units
tst 201599393 Windows and doors - Product standard, performance characteristics - Part 2: Interior doors ready for pedestrian passage - Without resistance to fire and / or smoke leak characteristics
TS EN 13964 Suspended ceilings - Requirements and test methods
TS EN 12365-1 Building equipment - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 1: Performance requirements and classification
TS EN 508-1 Roof and wall cladding sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 1: Steel
TS EN 508-2 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 2: Aluminum
TS EN 508-3 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 3: Stainless steel
TS EN 14500 Blinds and shutters - Thermal comfort and visibility comfort - Test and calculation methods
TS EN 1364-3 Fire resistance tests for non-bearing elements - Part 3: Curtain wall - Full installation (full equipment)
TS EN 1364-4 Fire resistance tests of load-bearing elements - Part 4: Façade - Part configuration
TS EN 14600 Door systems and windows with fire resistance and / or smoke control features - Rules and classification
TSE CEN / TS 1187 Test methods for exposed roofs
TS EN 1366-5 Fire resistance tests for service installations - Part 5: Service ducts and manholes
TS EN 1013 + A1 Transparent, single-layer, plastic-profile sheets for use in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
tst EN 14076 Wooden stairs - Terminology
tst EN 16481 Wooden stairs - Structural design - Calculation methods
TSE K 329 Multi-layer roof and facade cladding - For buildings - Hard plastic - Definitions, requirements and test methods
TS EN 14471 + A1: 2015 Chimneys - System chimneys - Plastic smoke lining - Rules and test methods
TS EN 13823: 2010 + A1: 2014 Fire reaction tests for construction products - Thermal products with a single combustion element - Construction products other than slabs
TS EN 60335-2-97: 2006 / A12 Safety regulations - Part for household electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and similar equipment
TS EN 60335-2-103 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2- 103: Particular requirements for drives for doors, doors and windows
TS EN 16487 Acoustics - Test code for suspended ceilings - Sound absorption
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 14992 + A1 Precast concrete products - Wall elements
TS EN 16005 Power-operated pedestrian doors suitable for pedestrian passage - Safety in use - Rules and test methods
tkt 2015101690 MANUAL ROTATING DOORS
TS EN 1013 + A1 Transparent, single-skinned, corrugated plastic sheets for roofing, walls and ceilings indoors and outdoors - Requirements and test methods
TSE K 449 Door systems - Sliding, sliding doors with glass panels
TS EN 13120: 2009 + A1: 2014 / AC Interior blinds - Performance requirements including safety
tkt 2015102210 AUTOMATIC SHUTTER AND DOOR SYSTEMS
TS 12655 / T1 Steel doors, burglar resistant
TS EN 16153 + A1 Polycarbonate (PC) flat sheets - Transparent - Closed corrugated (with chamber) - Used in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
TS EN 16497-1 Chimneys - Concrete System Chimneys - Part 1: Unstable smoke duct applications
TSE K 446 Accordion Door - Plasticizer Unpolished Polyvinyl Chloride (PVC-U)
TSE K 456 Water heater and boiler combustion chamber insulation plate
TS EN 16034 Pedestrian door sets, industrial, commercial, garage doors and opening windows - Product standard, performance and features angFire resistance and / or smoke control features
TSE K 473 Solar energy systems for roofs: Structural connection requirements for solar panels
TS EN 13384-2 Chimneys - Methods for calculating heat and fluid dynamics - Part 2: Chimneys connected to multiple heating devices
TS EN 12217 Doors - Operating forces - Necessary features and classification
TS EN 13830 Façade - Product standard
TS EN 13561 Exterior blinds - Performance requirements including safety
TS EN 13659 Shutters - Performance requirements including safety
TS EN 16580 Windows and doors - Resistance of door leaves to splash water and wetness - Test and classification
tst EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
TSE CEN / TS 1187 Test methods for roofs exposed to external fire
TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements
TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements
TSE CEN / TS 15680 Prefabricated wooden stairs - Mechanical test methods
TS EN 1628 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance under static loading
TS EN 1629 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance under dynamic loading
TS EN 1630 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance to manual theft interference
TS EN 1873 + A1 Auxiliary equipment for roofs - Plastic, single roof skylights - Product specifications and test methods
TS EN ISO 16283-3 Area measurement of sound insulation in acoustic-structural elements and structures - Part 3: Sound insulation in the first stage
TS EN ISO 16283-2 Sound measurement of acoustic components and structures - Part 2: Impact sound insulation
TS EN 16703 Acoustics - Test rule for steel screwed gypsum board systems - Insulation of airborne sound
TS 12558 Authorized Services - Door, window and barrier systems - Rules
TS EN 13084-6: 2015 Chimneys-Free-standing 6: Steel linings - Design and application
TS EN 16475-7: 2016 Chimneys - Accessories - Part 7: Rain caps - Specifications and Test Methods
TS EN 16654 Child protection products - Consumer-compatible finger protection devices for doors - Safety rules and test methods
TS EN 1026 Doors and windows - Air permeability - Test method
TS EN 1027 Doors and windows - Waterproofing - Test method
TS EN 12210 Windows and doors - Resistance to wind load - Classification
TS EN 12211 Windows and doors - Resistance to wind load - Test method
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 16475-3: 2016 Chimneys - Accessories - Part 3: Draft regulators, stop opening devices and combined secondary air devices - Specifications and Test Methods
TSE K 335 Plastic Chimney Terminal
TS EN 14019 Curtain walls - Impact resistance - Performance requirements
TS EN 16361 + A1 Power-driven doors suitable for pedestrian passage - Product standard, performance characteristics - Ready-made doors suitable for pedestrian passage, except for crash type doors, which are primarily designed to be operated with power.
TS EN 13119 Curtain walls - Terms and recipes
TS EN 13501-5: 2016 Construction products and building elements - Fire classification - Part 5: Classification using data obtained from the exposure of roofs to external fires
TS EN 15269-1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 1: General rules
TS EN 15269-3 Extended application of test results for fire resistance and / or smoke control for doors, shutters and openable window components, including elements of building equipment - Part 3: Fire resistance of hinged or revolving wooden door sets and openable wooden frame windows
TS EN 15269-7 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, blinds and openable window fittings (including building components) - Part 7: Fire resistance for steel sliding door sets
TS EN 15269-10 Comprehensive application of results from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 10: Fire resistance of steel roller shutter assemblies
TS EN 15269-20 Comprehensive application of the results obtained from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including structural elements) - Part 20: Hinged and studded glazed doors with steel, timber and metal frames
TS EN 14351-1: 2006 + A2 Windows and doors - Product standard, performance characteristics - Part 1: Windows and ready-made exterior doors suitable for pedestrian passage
TS EN 16758 Façade - Determination of strength of joints exposed to shear - Test method and requirements
tst EN 16153 + A1 Polycarbonate (PC) flat sheets - Transparent - Closed corrugated (with chamber) - Used in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
TS EN 12608-1 Rigid polyvinylchloride (pvc-U) profiles - Used in fabrication of windows and doors - Classification, properties and test methods
TS EN 15269-5 + A1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 5: Glazed door sets with hinged and swiveling metal frames and opening windows fire resistance
tkt 2016114159 Gypsum Board Systems Intervention Doors and Doors
TS EN 12608-1 Rigid polyvinylchloride (pvc-U) profiles - Used in fabrication of windows and doors - Classification, properties and test methods
tst 2017114313 Floor coverings in workplaces and workplaces at risk of slipping - Basic requirements and tests
TS EN 1365-1 / AC Fire resistance tests - For load-bearing elements - Part 1: Walls
TS 1905 / T1 Prefabricated wooden doors
TSE CLC / TR 50670 External fire exposure to roofs with photovoltaic (PV) arrays - Test method (s)
TS EN 12207 Windows and doors - Air permeability - Classification
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 16475-2 Chimneys - Accessories - Part 2: Requirements and test methods
TS EN 16497-2 Chimneys - Concrete System Chimneys - Part 2: Balanced smoke path applications
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 13830 Façade - Product standard
TS EN 14351-1: 2006 + A2 Windows and doors - Product standard, performance characteristics - Part 1: Windows and ready-made exterior doors suitable for pedestrian passage
TSE K 79 Modular building systems - Modular metal cabinets that can be installed and removed on site
TS 7251 EN 107 Windows-Test methods-Mechanical tests
TS 113 Roofing - Bitumen emulsions used as protective coatings - Specifications
TS EN 130 Doors-Test methods-Determination of the change of stiffness of door leaves by repeated torsion
TS 132 Roofing - Bitumen emulsions used as protective coatings - Test methods
TS EN 477 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of impact strength in main profiles - Mass reduction method
TS EN 478 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors, appearance after exposure to 150 c - Test method
TS EN 479 Non-plasticizing polyvinyl chloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of permanent thermal elongation
TS EN 506 Roofing sheets - Metal - Self-supporting - Made of copper or zinc - Specifications
TS EN 507 Roofing Sheets-Metal Fitting-Aluminum Plate-Features
TS EN 508-2 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 2: Aluminum
TS EN 508-3 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 3: Stainless steel
TS EN 516 Auxiliary equipment for roofs - Roof transport facilities - Walkways, wide and narrow steps
TS 538 Fastening door leaves
TS 538 / T1 Fastening door leaves
TS 538 / tst T Fastening door leaves
TS 539 Wooden door panels, with panel (mirror), glass, panel and glass
TS 539 / T1 Wooden door leaves - with panel (mirror), glass, panel and glass
TS 539 / tst T Wooden door panel, with panel, mirror, panel, panel and panel
TS 543 Calculation and construction rules of brick slabs
TS EN 612 Rain gutters and stitched rain pipes, reinforced with cord on the front side, made of metal sheet
TS 675 Pressed wooden door leaves
TS 675 / T1 Pressed wooden door leaves
TS 675 / T2 Pressed wooden door leaves
TS 675 / T3 Pressed wooden door leaves
TS 675 / tst T Pressed wooden door leaves
TS 734 Definitions of classification and dimensioning of building and space elements
TS 806 Wooden door frames
TS 806 / T1 Wooden door frames
TS 806 / tst T Wooden door frames
TS EN 846-2 Masonry - Auxiliary components - Test methods - Part 2: Determination of bond strength of pre-made horizontal joint reinforcement used in mortar joints
TS EN 846-8 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 846-11 Masonry - Auxiliary components - Test methods - Part 11: Determination of the deviation of size and shape of lintels
TS EN 948 Hinged and revolving doors - Determination of static torsional resistance
TS EN 950 Door leaves - Determination of resistance to hard object impact
TS EN 952 Door leaves - General and regional flatness - Measurement method
TS EN 1024 / T1 Roofing tiles - Made of clay - Determination of non-continuous geometric properties
TS EN 1121 Doors - Behavior between two different environments - Test method
TS EN 1154 Building equipment - Controlled door closing devices - Features and test methods
TS EN 1195 Timber - Test methods - Performance of floor covering in buildings
TS EN 1294 Door leaves - Determination of the behavior under the effect of moisture changes in consecutive uniform climatic conditions
TS EN 1443 Chimneys - General rules
TS EN ISO 1522 Paints and varnishes - Pendulum damping test
TS EN 1523 Window, door - Shutters and shutters - Bullet resistance - Test method
TS EN 1530 Door leaf - General and position uniformity - Tolerance classes
tst ENV 1627 Windows, doors, shutters - Theft resistance - Terms and classification
TS EN 1634-2 Fire resistance tests - Doors and shutters - Part 1: Fire resistance and smoke control tests for doors, shutters and shutters and building hardware components - Part 2: Test for characterization of fire resistance
TS EN 1856-1 / AC Chimneys - Requirements for metal chimneys - Part 1: Ready chimney components
TS EN 1857 Chimneys - Components - Concrete chimney linings
TS 1904 Door frames - Sheet steel
TS EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
TS 2166 Design and regulation of waste chimneys in buildings
TS 2167 Installation chimney and duct design and regulation rules
TS 2510 Masonry walls calculation and construction rules
TS 3613 Modular coordination - Building ladders and stairwell coordination dimensions
TS 4046 / tst T Prefabricated wall panels, made of lightweight aggregate concrete, with hollow
TS 4060 Sills - Made of concrete, ready
TS 4063 Parapets - Made of concrete, ready
TS 4192 Wood floor blocks - Terms, definitions
TS 4193 Wood floor blocks - General features
TS 4194 Wood floor wedges - Appearance characteristics of hard wood wedges
TS 6007 EN 949 Windows and curtain walls, doors, blinds and louvers - Determination of impact resistance with soft and heavy objects on doors
tst ISO / TR 6167 Fire resistance tests - Supporting suspended ceilings for the protection of steel beams in floor and roof construction
TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity -Calculation method
TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity - Calculation method
TS ISO 2444 Joints - Generated in buildings - Terms and recipes
TS ISO 9882 Performance standards in construction-Prefabricated concrete slabs-Performance test-Behavior under non-point loading
TS ISO 9883 Performance standards in construction-Prefabricated concrete slabs-Performance test-Behavior under point loading
TS EN ISO 10077-1 Thermal performance of windows, doors and louvers - Calculation of heat conduction - Part 1: Simplified method
TS 11380 Side air fittings (auxiliary air regulators) - for residential and similar building chimneys
TS 11382 Chimneys-Steel (industrial)
TS 11384 Chimneys-Housing etc. building chimneys - Fittings design and construction rules
TS 11385 Chimneys-Housing etc. for buildings - conditions and evaluation criteria for test chimneys
TS 11386 Chimneys - for residential buildings and similar buildings - Design and construction rules
TS 11387 Chimneys - Rules for the construction of chimney sweeps in residential and similar buildings
TS 11602 Glass putty
TS 11797 EN 947 Hinged and swing doors - Determination of resistance to vertical load
TS EN ISO 11925-2: 2010 / AC: 2011 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding
TS EN 12045 Shutters and blinds operated by motor power - Operating safety - Measurement of the transmitted force
TS EN 12046-2 Operating forces - Test method - Part 2: Doors
TS EN 12056-3 Attractive drainage systems - Indoor - part 3: Roof drainage - Design and calculation
TS EN 12095 Plastic pipe systems - Supports for rainwater pipe systems -Support resistance test
TS EN 12114 Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test methods
TS EN 12153 Curtain walls - Air permeability - Test method
TS EN 12155 Curtain walls - Water tightness - Laboratory test under static pressure
TS EN 12179 Curtain walls - Resistance to wind loads - Test method
TS EN 12194 Indoor and outdoor louvers - Improper use - Test methods
TS EN 12208 Windows and doors - Waterproofing - Classification
TS 12225 Workplaces - Door or window systems made of rigid pvc - General rules
TS EN 12365-1 Building hardware - Seals and sealing seals for doors, windows, shutters and curtain walls - Part: 1 performance rules and classification
TS EN 12400 Windows and doors suitable for pedestrians - Mechanical durability - Features and classification
TS EN 12424 Doors - Used in industrial and commercial buildings and garages - Resistance to wind load - Classification
TS EN 12425 Doors - Used in industrial and commercial buildings and garages - Resistance to water penetration - Classification
TS EN 12426 Doors - Used in industrial and commercial buildings and garages - Air permeability - Classification
TS EN 12427 Doors - Used in industrial and commercial buildings and garages - Air permeability - Test method
TS EN 12433-1 Doors - Industrial and commercial buildings and garages - Terms and descriptions - Part 1: Door types
TS EN 12445 Doors and gates - Used in industrial and commercial areas and in garages - Safety of use of powered doors - Test methods
TS EN 12446: 2011 Chimneys - Components - Concrete wall elements
TS EN 12453 Doors and gates - Used in industrial and commercial areas and in garages - Safety in the use of force-operated doors - Rules
TS EN 12489 Doors - Used in industrial and commercial buildings and garages - Resistance to water penetration - Test method
TS EN 12519 Windows and pedestrian doors - terms and descriptions
TS EN ISO 12567-2 Thermal performance of windows and doors - Determination of thermal conductivity by hot box method - Part 2: Roof windows and other protruding windows "
Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 12567: Complete windows and doors
TS EN 12604 Doors - used in industrial and commercial buildings and garages - mechanical aspects - Requirements
TS CR 12695 Metal chimneys - Corrosion resistance properties and test methods
TS EN 12825 Raised floor systems
TS EN 12835 Airtight shutters - Air permeability test
TS 451 EN 12859 / tst A1 Gypsum blocks - Definitions, properties and tests and test methods
TS EN 12978 + A1 Doors and gates - Security for power-operated doors and gates used in industrial and commercial spaces and garages
TS EN 13049 Windows - Light and severe mass impact - Test method, safety rules and classification
TS EN 13050: 2011 Façade - Water tightness - Laboratory test under dynamic air pressure and water spray effect
TS EN 13063-2 + A1 Chimneys - Chimneys with clay / ceramic fume lining system - part 2: Rules and test methods applied in wet conditions
TS EN 13069 Chimneys - System chimneys with clay / ceramic outer walls - rules and test methods
TS EN 13084-4 Chimneys-Free-standing-Section 4: Brick lining - Design and application
TS EN 13084-5 Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
TS EN 13084-8 Industrial chimneys - Free standing - Part 8: Chimney system suspended on a supporting structure - Design and application
TS EN 13084-2 Chimneys - Free standing - Part 2: Concrete chimneys
TS EN 13084-4 / AC Chimneys - Free standing - Part 4: Brick lining - Design and application
Industrial chimneys - Free standing - Section 13084: General features
TS EN 13084-1 Chimneys - Free standing - Part 1: General rules
TS EN 13116 Curtain walls - Wind load resistance - Performance requirements
TS EN 13123-2 Windows, doors and shutters - Explosion resistance - Necessary specifications and classification - Part 2: Classification test
TS EN 13124-2 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Classification test
TS EN 13213 Low floors
TS EN 13216-1 Chimneys - Test methods for system chimneys - Part 1: General test methods
TS EN 13384-3 Chimneys - Thermal and fluid dynamic calculation method - Part 3: Method for creating diagrams and charts for chimneys serving a heating device
TS EN 13420: 2011 Windows- Behavior in different climates-Test method
TS EN 13527 Shutters and shutters- Test methods- Working force measurement
TS EN ISO 13786 Thermal performance of building components - Dynamic thermal properties - Calculation methods
TS EN 14201 Blinds and shutters - Resistance to repeated operations (mechanical strength) - Test methods "
TS EN 14202 Blinds and shutters - Suitable for use with tubular and square motor vehicles - Rules and test methods
TS EN 14203 Blinds and roller shutters - Availability of gearboxes with swivel arm - Rules and test methods "
TS EN 14220 Wood and wood based materials used in exterior windows, exterior door casings and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based materials used in interior windows, interior door casings and interior door frames - Requirements and features
TS EN 14246 Gypsum elements - Used in suspended ceilings - Definitions, requirements and test methods
TS EN 14297 Chimneys - Freeze-thaw test for determination of durability of chimney products
TS EN 14437 Determination of the uplift resistance of clay or concrete roof tiles placed on the roof - Roof system test method
TS EN 14500 Shutters and shutters - Thermal and visual comfort - Test and calculation methods
TS EN 14501 Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification "
TS EN 14600 Door systems and windows with fire resistance and / or smoke control characteristics - Rules and classification "
TS EN 14608 Windows - Determination of resistance to sag force
TS EN 14609 Windows - Determination of resistance to static torsion
TS EN 14637 Building equipment - Electrically controlled open holding systems for fire / smoke doors - Features, test methods, application and maintenance
TS EN 14759 Louvers - Acoustic insulation according to airborne sound - demonstrating performance "
TS EN 14782 Self-supporting sheet metal for roofs, outer claddings and interior linings
TS EN 14782 Self-supporting sheet metal for roofs, outer claddings and interior linings
TS EN 14963 Roof coverings - Continuous roof skylights - Plastic - with or without skirt - Classification, requirements and test methods
TS EN 14964 Rigid substrates - for discontinuous roofing - recipes and specifications
TS EN 14975 + A1 Ceiling stairs - Rules markings and tests
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 15080-8 Extended application of the results of fire resistance tests - Part 8: Beams
TS EN 15254-5 Comprehensive application of results from fire resistance tests - Non-bearing walls - Part 5: Metal sandwich panel construction
TS EN 15269-7 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, blinds and openable window fittings (including building components) - Part 7: Fire resistance for steel sliding door sets
TS EN 15269-20 Comprehensive application of the results obtained from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including structural elements) - Part 20: Hinged and studded glazed doors with steel, timber and metal frames
TS EN 15269-1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 1: General rules
TS EN 15287-1 + A1: 2010 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-chamber heating devices
TS EN 15644 Prefabricated solid wood staircase with traditional design - Features and requirements
TS EN 13084-5 / AC Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
TS EN 15080-8 Extended application of the results of fire resistance tests - Part 8: Beams