Building Materials and Buildings, Construction Industry Standards

All standards in the construction industry are as follows. Our company performs all of the following standards: testing, inspection and certification.

TS ISO 7976-1 Building tolerances-Measurement methods of buildings and elements used in building 1: Methods and devices

TS ISO 7976-2 Building tolerances-Measurement methods of buildings and elements used in building 2: Position of measuring points

TS EN 1337-11 Structural bearings - Part 11: Transport, storage and assembly

TS EN 1542 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adhesion strength by pulling method

TS EN 1337-1 Structure of bearings - Part 1: General design rules

TS EN 1993-1-1 Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)

TS EN 1992-1-1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)

TS EN 12833 Roof windows and rotating shutters: Resistance to snow load - Test method

TS EN 1991-1-2 Effects on structures - Part 1-2: General effects - Effects on structures exposed to fire (eurocode 1)

TS EN 1990 Eurocade - Fundamentals of building design

TS EN 1991-1-1 Eurocode 1: Structure effects section 1-1: General effects densities, self-weight and loads affecting structures

TS EN 1991-1-1 Impacts on structures - Part 1-1: General effects - Densities, weight of buildings and other loads to which they are exposed (eurocode 1)

TS EN 1991-1-2 European rule 1 - Principles of design and impact of structures - Part 2-2: Building effects - Effects on structures exposed to construction

TS EN 1991-1-3 Eurocode 1: Effects on structures - Part 1-3: General effects - Snow loads

TS EN 1337-4 Bearings - Used in structures - Part 4: Roller bearings

TS EN 1337-6 Bearings - Used in structures - Part 6: Cradle bearings

TS EN 1337-2 Bearings - Used in structures - Part 2: Sliding elements

TS EN 1337-7 Bearings - Used in structures - Part 7: Spherical and cylindrical ptfe bearings

TS EN 1991-1-3 Impacts on structures - Part 1-3: General effects - Snow loads (eurocode 1)

TS EN 1991-1-4 Impacts on structures - Part 1-4: General effects - Wind effects (eurocode 1)

TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings

TS EN 1993-1-10 Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (Eurocode 3)

TS EN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints

TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning

TS EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and building rules

TS EN 1991-1-4 Eurocode 1: Design and impact guidelines for buildings - Part 1-4: Building effects - Wind impact

TS EN 1337-5 Bearings - Used in structures - Part 5: Cup bearings

TS EN 1337-3 Bearings - Used in structures - Part 3: Elastomeric bearings

TS EN 1990 / A1 Eurocode - Fundamentals of building design

TS EN 1991-3 Impacts on structures - Part 3: Impacts of cranes and construction equipment (Eurocode 1)

TS EN 1992-3 Eurocode 2: Design of concrete structures - Part 3: Fluid retention and storage structures

TS EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges

TS EN 1999-1-1 Design of aluminum structures - Part 1-1: General rules - Rules for buildings

Eurocode 1999: Design of aluminum structures - Part 1-2: General rules - Structural fire design TS EN 9-1-2

TS EN 1999-1-3 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)

TS EN 1994-2 / AC Design of steel and concrete composite structures - Part 2: General rules and rules to be applied to bridges (eurocode 4)

TS EN 1991-1-2 / AC Effects on structures - Part 1-2: General effects - Effects on structures exposed to fire (eurocode 1)

TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules for buildings (eurocode 3)

TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Structural fire design (Eurocode 5)

TS EN 1991-1-4 / AC Impacts on structures - Part 1-4: General effects - Wind effects (Eurocode 1)

TS EN 1993-1-8 / AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)

TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules for buildings (eurocode 4)

TS EN 1997-1 / AC Geotechnical design - Part 1: General rules (eurocode 7)

TS EN 1999-1-2 / AC Eurocode 9: Design of aluminum structures - Part 1-2: General rules - Structural fire design

TS EN 1997-2 / AC: 2010 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)

TS EN 1996-1-2 / AC Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design

TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)

TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)

TS EN 1994-1-1 Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)

tst 2017 Modular coordination-Terms

TS 2020 Modular coordination principles and rules

Eurocode 1993: Design of steel structures - Part 1-3: General rules

1999-1-3: 2007 / A1 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)

TS EN 1999-1-4 / A1 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)

TS EN 62337 Commissioning of control systems and electrical equipment in the process industry - Specific phases and main considerations

TS ISO 1791 Building construction - Modular compatibility - Terms

TS EN 1991-1-2: 2002 / AC European rule 1 - Design and impact principles of buildings - Part 1-2: Building effects - Effects on structures exposed to fire

1991-1-6: 2005 / AC Impacts on structures - Part 1-6: General effects - Impacts during construction (eurocode 1)

TS EN 1991-4: 2006 / AC Eurocode 1: Design and effect of structures - Part 4: Silo and tank effects

1996-1-1: 2005 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (eurocode 6)

TS EN 1991-3: 2006 / AC Impacts on structures - Part 3: Effects of cranes and construction equipment (eurocode 1)

TS EN 1998-1: 2004 / A1 Eurocode 8: Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings

TS EN 1997-1 / A1 Eurocode 7: Geotechnical design - Part 2: General rules

TS EN 15804 + A1 Sustainability of buildings - Environmental declarations on products - Main rules for the product category of building products

Eurocode 1999: Design of aluminum constructions - Part 1-1: General structural rules TS EN 2-9-1 / A1

TS EN 16485 Round and sawn timber - Environmental product disclosures - Product category for timber and wood-based products used in buildings

TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project

TS EN 1992-2 Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)

TS EN 1992-3 Design of concrete structures - Part 3: Liquid retention and containment structures (Eurocode 2)

TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)

TS ISO 2848 Building construction - Modular compatibility - Principles and rules

TS ISO 2848 Building construction - Modular coordination - Principles and rules

TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)

TS EN 1995-1-2 Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)

TS EN 1995-1-1 / AC Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)

TS EN 1995-1-1 / A1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)

TS EN 1995-1-1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)

TS EN 1993-1-1 / A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)

TS EN 1995-1-1 / A2 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)

1991-1-7 / A1 Impacts on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)

TS ISO 1791 Building construction - Modular coordination - Terms

TS EN 1995-2 Design of wooden structures - Part 2: Bridges (Eurocode 5)

TS EN 1996-1-1 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (Eurocode 6)

TS EN 1337-10 Bearings - Used in structures - Part 10: Inspection and maintenance

TS EN 1994-1-2 / tstA1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project

tst EN 15804 + A1 Sustainability of structures - Environmental declarations on products - Main rules for the product category of construction products

tst EN 16485 Round and sawn timber - Environmental product declarations - Product category rules for wood and timber products used in buildings

TS EN 1337-11 Structural bearings - Part 11: Transport, storage and assembly

TS EN 1337-8 Bearings - Used in structures - Part 8: Guide bearings and movement restricted bearings

TS EN 1991-1-7 Effects on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)

TS EN 1991-1-7 / AC Effects on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)

1991-1-7 / A1 Impacts on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)

TS EN 1992-1-1 / A1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)

TS EN 1991-2 / AC Impacts on structures - Part 2: Traffic loads on bridges (Eurocode 1)

TS EN 1991-4 / AC Impacts on structures - Part 4: Silos and tanks (Eurocode 1)

TS EN 1991-4 Impacts on structures - Part 4: Silos and tanks (Eurocode 1)

TS EN 1991-2 Impacts on structures - Part 2: Traffic loads on bridges (Eurocode 1)

TS EN 1991-1-6 Effects on structures Section 1-6: General effects - Impacts during application (Eurocode 1)

TS EN 1991-3 Impacts on structures - Part 3: Impacts of cranes and construction equipment (Eurocode 1)

tst EN 1999-1-1 Design of aluminum structures - Part 1-1: General structural rules (Eurocode 9)

TSE K 473 Solar energy systems for roofs: Structural connection requirements for solar panels

tst EN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints

TS EN 1993-1-8 / tst AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)

TS EN 1993-1-4 / A1 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel

TS EN 1993-1-1 / tst A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)

tst EN 1993-1-10 Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (Eurocode 3)

TS EN 1993-1-10 / tst AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)

tst EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components

TS EN 1993-1-11 / tst AC Design of steel structures - Part 1-11: Design of structures with tension components (eurocode 3)

tst EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade

TS EN 1993-1-12 / tst AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)

tst EN 1993-1-3 Eurocode 3: Design of steel structures - Part 1-3: General requirements - For cold-formed thin-gauge elements and sheet metal

TS EN 1993-1-3 / tst AC Eurocode 3 - Part 1-3: General rules - Supplementary rules for cold-Formed members and sheeting

Eurocode 1993: Design of steel structures - Part 1-4: General rules - Additional rules for stainless steel TS EN 1-3-1

tst EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect

TS EN 1993-1-5 / tst AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)

tst EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures

TS EN 1993-1-6 / tst AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)

tst EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates

TS EN 1993-1-7 / tst AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)

tst EN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints

tst EN 1993-1-9 Eurocode 3: Design of steel structures - Part 1-9: General rules - Fatigue

TS EN 1993-1-9 / tst AC Design of steel structures - Part 1-9: Fatigue (eurocode 3)

tst EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges

TS EN 1993-2 / tst AC Design of steel structures - Part 2: Steel bridges (eurocode 3)

tst EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles

TS EN 1993-3-1 / tst AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)

tst EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys

tst EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos

TS EN 1993-4-1 / tst AC Design of steel structures - Part 4-1: Silos (eurocode 3)

tst EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses

TS EN 1993-4-2 / tst AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)

tst EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines

TS EN 1993-4-3 / tst AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)

tst EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles

tst EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures

TS EN 1993-6 / tst AC Design of steel structures - Part 6: Crane support structures (eurocode 3)

TS EN 1993-5 / tst AC Design of steel structures - Part 5: Piles (eurocode 3)

Impacts on structures - Part 1991-1: General effects - Snow loads (eurocode 3) TS EN 2003-1-1: 3 / A1

TSE CEN / TR 16970 Sustainability of structures - Guidelines for the implementation of EN 15804

TS EN 1993-1-1 / NA Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)

TS EN 1993-1-1 / D1 Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)

TS EN 1993-1-5 / NA Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect

TS EN 1993-1-8 / NA Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints

TS EN 16908 Cement and building lime - Environmental product declarations - Product category to complement EN 15804

TS ISO 6512 Modular coordination floor heights and volume heights for housing

TS EN 1996-3 / AC Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures

TS ISO 1006 Building construction-Modular structures-Basic structure

TS EN 1337-9 Bearings- Used in structures- Part 9: Protection

TS EN 1337-2 Bearings - Used in buildings - Part 2: Sliding elements

TS EN 1337-7 Bearings - Used in structures - Part 7: Spherical and cylindrical ptfe bearings

TS EN 1337-1 Bearings - Used in structures - Part 1: General design rules

TS EN 1337-3 Bearings - Used in structures - Part 3: Elastomeric bearings

TS EN 1337-4 Bearings - Used in structures - Part 4: Roller bearings

TS EN 1337-4 / AC Bearings - Used in structures - Part 4: Roller bearings

TS EN 1337-5 Bearings - Used in structures - Part 5: Cup bearings

TS EN 1337-6 Bearings - Used in structures - Part 6: Cradle bearings

TS EN 1337-8 Bearings - Used in structures - Part 7: Guide bearings and thrust bearings

TS EN 1337-10 Bearings - Used in structures - Part 10: Inspection and maintenance

TS EN 1990 / A1 / AC Building design principles (eurocode)

TS EN 1990 Building design principles (eurocode)

TS EN 1990 / A1 Building design principles (eurocode)

TS EN 1991-1-4 / AC Impacts on structures - Part 1-4: General effects - Wind effects (eurocode 1)

TS EN 1991-2 Eurocode 1: Effects on structures - Part 2: Traffic loads on bridges

TS EN 1991-1-5 Eurocode 1: Effects on structures - Part 1-5: General effects - Thermal effects

TS EN 1991-1-6 Eurocode 1: Impacts on structures section 1-6: General impacts - Impacts during operation

TS EN 1991-4 Eurocode 1: Principles of design and impact of structures - Part 4: Silo and tank effects

Impacts on structures - Part 1991-1: General effects - Wind effects (eurocode 4) TS EN 1-1-4 / A1

TS EN 1991-1-5 / AC Effects on structures - Part 1-5: General effects - Thermal effects (eurocode 1)

TS EN 1991-1-3 / AC Impacts on structures - Part 1-3: General effects - Snow loads (eurocode 1)

TS EN 1991-2 / AC Eurocode 1: Effects on structures - Part 2: Traffic loads on bridges

TS EN 1991-1-7 / AC Effects on structures - Part 1-7: General effects - Accidental effects

TS EN 1991-1-7 Effects on structures - Part 1-7: General effects - Accidental effects

TS EN 1991-1-1 / AC Effects on structures - Part 1-1: General effects - Densities, self-weight of buildings and other loads to which they are subjected (eurocode 1)

TS EN 1992-1-1 / AC Design of concrete structures - Part 1-1: General rules and rules applicable to buildings (eurocode 2)

TS EN 1992-2 Eurocode 2: Design of concrete structures - Part 2: Concrete bridges

TS EN 1992-1-2 Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)

1992-1-1: 2004 / AC: 2010 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)

TS EN 1992-1-2 / AC Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)

TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (eurocode 2)

TS EN 1993-1-5 / AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)

TS EN 1993-1-12 / AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)

TS EN 1993-1-6 / AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)

TS EN 1993-1-7 / AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)

TS EN 1993-1-9 / AC Design of steel structures - Part 1-9: Fatigue (eurocode 3)

TS EN 1993-2 / AC Design of steel structures - Part 2: Steel bridges (eurocode 3)

TS EN 1993-3-1 / AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)

TS EN 1993-4-2 / AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)

TS EN 1993-4-3 / AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)

TS EN 1993-4-1 / AC Design of steel structures - Part 4-1: Silos (eurocode 3)

TS EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles

TS EN 1993-1-1 Eurocode3: Design of steel structures - Part 1-1: General rules and building rules

TS EN 1993-1-2 Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)

TS EN 1993-1-9 Eurocode 3: Design of steel structures - Part 1-9: General rules - Fatigue

TS EN 1993-1-3 Eurocode 3: Design of steel structures - Part 1-3: General requirements - For cold-formed thin-gauge elements and sheet metal

TS EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar structures without lateral load effect

TS EN 1993-1-10 / AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)

TS EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures

TS EN 1993-1-11 / AC Design of steel structures - Part 1-11: Design of structures with tensile components (eurocode 3)

TS EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures

TS EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates

TS EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys

TS EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos

TS EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses

TS EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines

TS EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles

TS EN 1993-6 / AC Design of steel structures - Part 6: Crane support structures (eurocode 3)

TS EN 1993-5 / AC Design of steel structures - Part 5: Piles (eurocode 3)

TS EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components

TS EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade

TS EN 1993-1-2 / AC Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)

TS EN 1994-2 Eurocode 4: Design of steel and concrete composite structures - Part 2: General rules and rules for bridges

TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)

TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire

TS EN 1995-1-1 / AC Eurocode 5: Design of wooden structures section 1-1: General rules and building rules

TS EN 1995-2 Eurocode 5 - Design of wooden structures - Part 2: Bridges

TS EN 1995-1-1 Eurocode 5: Design of wooden structures section 1-1: General rules and building rules

TS EN 1995-1-2 Eurocode 5: Design of wooden structures section 1-2: General rules - Design of structural fire

TS EN 1995-1-1 / A1 Design of wooden structures - Part 1: General - General rules and rules to be applied to buildings (eurocode 5)

TS EN 1996-1-2 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design

TS EN 1996-2 Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...

TS EN 1996-3 Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures

TS EN 1996-2 / AC Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...

TS EN 1999-1-4 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)

TS EN 1999-1-5 Design of aluminum structures - Part 1-5: Shell structures (eurocode 9)

TS EN 1999-1-1 / A1 Design of aluminum structures - Part 1-1: General structural rules (eurocode 9)

TS 2015 Modular coordination "large modules" for horizontal coordination dimensions

TS 2018 Modular coordination Coordination dimensions for interior and exterior doors

TS 2019 Modular coordination Coordination dimensions for flat, rigid sheets and panels used in buildings

TS ISO 4463-1 Building measurement methods - Determination of limits and measurement - Part 1: Planning and organization, measurement procedures, acceptance criteria

TS ISO 4463-2 Building measurement methods - Determination of limits and measurement - Part 2: Measuring stations and target points

TS ISO 4463-3 Building measurement methods - Determination of limits and measurement - Part 2: Checklist for studies and procurement of measuring services

TS 7045 Measurement methods in buildings-General principles and procedures for determination of suitability in terms of size

TS 8024 Reliability of structures - General terms

TS 8276 General control rules for external wall dilatation in buildings