All the standards mentioned below are tested, inspected and inspected by us and we provide fast and reliable certification services based on customer satisfaction.
TS EN 524-1 Steel strip sheaths - Test methods for prestressed reinforcement - Part 1: Determination of shape and dimensions
TS EN 524-2 Steel strip sheaths - Test methods for prestressed reinforcement part 2: Determination of bending behavior
TS EN 524-5 Steel strip sheaths - Test methods for prestressed reinforcement - Part 5: Determination of resistance to tensile load
TS EN 1770 Concrete structures - Products and systems for protection and repair - Test methods - Determination of heat expansion coefficient
TS EN ISO 12944-3 Paints and varnishes - Steels - Corrosion protection of steel structures by protective paint systems - Part 3: Design
TS EN ISO 12944-8 Paints and varnishes - Steels - Corrosion protection of steel structures by protective paint systems - Part 8: Development of features for new operation and maintenance
TS EN 12189 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the processing time of the adhesives used in the structure
TS EN 1542 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adhesion strength by pulling method
TS EN 846-10 Masonry - Auxiliary components - Test methods - Part 10: Load capacity and load-displacement properties of cantilever holders
TS EN 846-3 Masonry - Auxiliary components - Test methods - Part 3: Determination of the shear load capacity of pre-welded horizontal joint reinforcement welds
TS EN 1337-1 Structure of bearings - Part 1: General design rules
TS EN 1877-1 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 1: Determination of epoxy equivalents
TS EN 1877-2 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 2: Determination of amine functions using the total number of bases
TS EN 1993-1-1 Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 1992-1-1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN ISO 12944-3 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design criteria
TS EN ISO 12944-8 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 8: Specification for new application and maintenance
TS EN 846-13 Masonry - Auxiliary components - Part 13: Determination of resistance to impact, wear and corrosion of organic coatings
TS EN 846-4 Masonry-Auxiliary components-Test methods part 4: Determination of load-city characteristics and load capacities of tapes
TS EN 1052-3 Paper-Test methods-Part 3: Determination of initial shear strength
TS EN 12617-4 Concrete structures - Test methods for products and systems for protection and repair - Part 4: Determination of shrinkage and expansion
TS EN 13057 Concrete structures - Test methods for products and systems for protection and repair - Determination of resistance to capillary water absorption
TS EN 13579 Concrete structures-Products and systems for protection and repair-Test methods-Drying test for hydrophobic impregnation
TS EN 13687-1 Concrete structures-Products and systems for protection and repair-Test methods-Determination of thermal compatibility-Part 1: Freezing in de-icing salt-Thawing test
TS EN 13687-2 Concrete structures-Products and systems for protection and repair-Test methods-Determination of thermal compatibility-Part 2-Heavy rain repetitions (thermal shock)
TS EN 13687-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 3: Thermal cycle without de-icing salt effect
TS EN 13687-4 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility section 4: Dry
TS EN 13687-5 Concrete structures - Test methods for products and systems for protection and repair - Determination of thermal compatibility - Part 5: Resistance to heat shocks
TS EN 13733 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the strength of structural bonding materials
TS EN 13395-1 Concrete structures-Products and systems for protection and repair-Test methods-Determination of workability-Part 1: Fluid determination test of water-repellent mortars
TS EN 13395-4 Concrete structures-Products and systems for protection and repair-Test methods-Determination of machinability-Part 4: Application of repair mortars used on the surface
TS EN 13395-2 Concrete structures-Products and systems for protection and repair-Test methods-Determination of workability-Part 2: Free and mortar flow test
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods, determination of workability - Part 3: Test for the fluency of repair concrete
TS EN 1075 Wooden structures - Test methods - Joints with perforated sheet metal binders
TS EN 13057 Concrete structures - Products and systems for protection and repair - Test methods - Determination of resistance to capillary water absorption
TS EN 13579 Concrete structures - Products and systems for protection and repair - Test methods - Drying test for hydrophobic impregnation
TS EN 13687-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 2: Rain effect with high temperature difference (thermal shock)
TS EN 13687-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 3: Thermal cycles without de-icing salt effect
TS EN 13687-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 4: Thermal cycles in dry environments
TS EN 13733 Concrete structures - Products and systems for protection and repair - Test methods - Determination of strength of adhesives used in construction
TS EN 13395-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 1: Spatial determination of thixotropic mortars
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 3: Determination of spreading in repair concrete
TS EN 13395-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 4: Application of repair mortars used in ceilings
TS 5190 EN 26891 Wooden structures - Joints made with mechanical binders - General principles for determination of strength and deformation properties
TS EN 13271 Wood fasteners - Characteristic load carrying capacity and slip modulus for joints using fasteners
TS EN 13529 Concrete structures - Products and systems for protection and repair - Test methods - Resistance to severe chemical effects
TS EN 1504-10 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 1771 Concrete structures - Products and systems for protection and repair - Test methods - Determination of injectability and splitting test
TS EN 12617-2 Concrete structures - Products and systems for protection and repair - Test methods - Part 2: Shrinkage of cracked injection products with polymer binders: Volumetric shrinkage
TS EN 12618-2 Concrete structures - Products and systems for protection and repair - Test methods - Part 2: Determination of adhesion of injection products with or without thermal cycling - Determination of adhesion by bond tensile strength
TS EN 12618-3 Concrete structures - Products and systems for protection and repair - Test methods - Part 3: Determination of adhesion of injection products with or without thermal cycling - Inclined cutting method
TS EN 12637-1 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete
TS EN 14251 Round building wood - Test method
TS EN 14406 Concrete structures - Products and systems for protection and repair - Test methods - Determination of expansion rate and evaluation of expansion
TS EN 14497 Concrete structures - Products and systems for protection and repair - Test method - Determination of filtration stability stability
TS EN 14498 Concrete structures - Products and systems for protection and repair - Volume and mass changes at the end of air drying and retention cycles in water
TS EN 1504-2 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-4 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 4: Structural bonding
TS EN 12614 Concrete structures - Products and systems for protection and repair - Test methods - Determination of glass transition temperature of polymers
TS EN 14374 Timber constructions - Layered structural veneer wood - Requirements
TS EN 14251 Round wood - Structural purposes - Test methods
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning
TS EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and building rules
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS EN 1504-3 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 1504-10 / AC Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 846-8 / A1 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 1504-6 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 6: Anchoring of steel reinforcing bars
TS EN 1504-7 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 7: Corrosion protection of reinforcement
TS EN 1992-3 Eurocode 2: Design of concrete structures - Part 3: Fluid retention and storage structures
TS EN 13412 Concrete structures - Products and systems for protection and repair - Test methods - Determination of modulus of elasticity in pressure
TS EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges
TS EN 383 Timber - Test methods - Basic values of anchor type fasteners and determination of burying strength
TS EN 1999-1-1 Design of aluminum structures - Part 1-1: General rules - Rules for buildings
Eurocode 1999: Design of aluminum structures - Part 1-2: General rules - Structural fire design TS EN 9-1-2
TS EN 13791 Determination of compressive strength in situ of structures and precast concrete components
TS EN 1504-10 / AC Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1999-1-3 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)
TS EN 1052-3 / A1 Masonry - Test methods - Part 3: Determination of initial shear strength
TS EN 14592 + A1 Wooden structures - Dowel fasteners - Requirements
TS EN 14545 Wooden structures - Connectors - Requirements
TS EN 1090-3 Steel and aluminum construction applications - Part 3: Technical requirements for aluminum structures
TS EN 1994-2 / AC Design of steel and concrete composite structures - Part 2: General rules and rules to be applied to bridges (eurocode 4)
TS EN 1994-2 / AC Design of steel and concrete composite structures - Part 2: General rules and rules to be applied to bridges (eurocode 4)
TS EN 13670 Construction of concrete structures
TS EN 14545 Wooden structures - Connectors - Requirements
TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules for buildings (eurocode 3)
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Structural fire design (Eurocode 5)
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 14250 Wooden structures - Prefabricated structural elements combined with riveted metal plates - Product requirements
TS EN 1993-1-8 / AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules for buildings (eurocode 4)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules for buildings (eurocode 4)
TS EN 1999-1-2 / AC Eurocode 9: Design of aluminum structures - Part 1-2: General rules - Structural fire design
TS EN 1996-1-2 / AC Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TSE CEN / TR 15177 Determination of freeze-thaw resistance of concrete - Structural internal damage
TS EN 1994-1-1 Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1994-1-1 Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 594 Wooden structures - Test methods - Durability and durability of wooden frame wall plates against loads parallel to the planes
TS EN 15241 / AC Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
TS EN 1090-2: 2008 + A1 Steel and aluminum construction applications - Part 2 - technical requirements for steel structures
TS EN 594 Timber - Test methods - Strength and durability of wooden framed panels against loads parallel to the planes
Eurocode 1993: Design of steel structures - Part 1-3: General rules
1999-1-3: 2007 / A1 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)
TS EN 1999-1-4 / A1 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 1090-1: 2009 + A1 Steel construction applications - Part 1: Requirements for conformity assessment of structural components
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 1745 Masonry and masonry products - Methods for determination of thermal properties
TS EN 1745 Masonry and masonry products - Methods for the determination of thermal properties
TS EN 1999-1-4 / AC Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 1999-1-5 / AC Design of aluminum structures - Part 1-5: Shell structures (eurocode 9)
TS EN 12617-4 Concrete structures - Test methods for products and systems for protection and repair - Part 4: Determination of shrinkage and expansion
TS 13606 Tensile strength of concrete surfaces and test method for determination of bond strength or tensile strength of concrete repair and coating materials by direct tensile method (pull-off method)
TS 13609 Test method for the evaluation of asphalt-paved reinforced concrete bridge decks using soil radar (GPR) technique
TS EN 13412 Concrete structures - Products and systems for protection and repair - Test methods - Determination of modulus of elasticity in pressure
1996-1-1: 2005 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (eurocode 6)
TS EN 846-5 Masonry - Auxiliary components - Test methods - Part 5: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (double test)
TS EN 846-6 Masonry - Auxiliary components - Test methods - Part 6: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (single-end test)
TS EN 846-7 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics (couplet test for mortar joint connections)
TS EN 846-14 Test methods for masonry auxiliary components - Part 14: Determination of initial shear strength between the top of the wall and the prefabricated part of the composite lintel
TS EN 1090-3 Steel and aluminum construction applications - Part 3 - Technical requirements for aluminum structures
tst 2510 Masonry walls calculation and construction rules
TS EN 1090-1 + A1 Steel and aluminum construction applications - Part 1: Conformity assessment requirements of bearing elements
TS EN 991 Gas concrete or lightweight aggregate porous concrete - Determination of pre-structured components
Eurocode 1999: Design of aluminum constructions - Part 1-1: General structural rules TS EN 2-9-1 / A1
TS ISO 16204 Durability - Service life design of concrete structures
TS 13515 Complementary standard for the implementation of TS EN 206
TS EN 16485 Round and sawn timber - Environmental product declarations - Product category rules for wood and timber products used in buildings
TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 1992-2 Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 1992-3 Design of concrete structures - Part 3: Liquid retention and containment structures (Eurocode 2)
TS 13685 On-site determination of compressive strength in structures and precast concrete components - Complementary standard for the application of TS EN13791
TS 500 / T3 Design and construction rules of reinforced concrete structures
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN 1995-1-2 Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN 1995-1-1 / AC Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 / A1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1993-1-1 / A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)
TS EN 1995-1-1 / A2 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
FprEN 1090-5 -
TSE K 317 Modular construction systems - Modular cabins made of glass fiber reinforced polyester material that can be installed and removed on site
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 1995-2 Design of wooden structures - Part 2: Bridges (Eurocode 5)
TS EN 1996-1-1 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (Eurocode 6)
TS EN 1994-1-2 / tstA1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 1994-1-2 / tstA1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 13391 Mechanical tests for post-tensioning systems
TS EN 13294 Concrete structures - Products and systems for protection and repair - Test methods - Determination of curing time
TS EN 13578 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility with fresh concrete
TS EN 13580 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water absorption and resistance to alkalis for hydrophobic impregnations
tst EN 13381-4 Test method for the determination of the contribution of structural elements to fire resistance - Part 4: Passive protection applied to steel elements
TS ISO 16204 Durability - Lifecycle design of concrete structures
tst EN 16485 Round and sawn timber - Environmental product declarations - Product category rules for wood and timber products used in buildings
TS EN 1992-1-1 / A1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 1075 Wooden structures - Test methods - Joints with perforated metal binders
EN 14592: 2008 + A1: 2012 Wooden structures - Dowel fasteners - Requirements
tst EN 1999-1-1 Design of aluminum structures - Part 1-1: General structural rules (Eurocode 9)
Bus stops for TSE K 474 city transport
TS EN 1993-1-8 / tst AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)
TS EN 1993-1-4 / A1 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 13381-9 Test methods for the determination of the contribution of fire resistance of structural elements - Part 9: Fire protection systems for web spans steel beams
tst 2015104593 Sealing rules for joints in concrete structures with water retaining gasket
TS EN 1993-1-1 / tst A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)
TS EN 1993-1-10 / tst AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)
tst EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components
TS EN 1993-1-11 / tst AC Design of steel structures - Part 1-11: Design of structures with tension components (eurocode 3)
tst EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade
TS EN 1993-1-12 / tst AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)
TS EN 1993-1-3 / tst AC Eurocode 3 - Part 1-3: General rules - Supplementary rules for cold-Formed members and sheeting
tst EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
Eurocode 1993: Design of steel structures - Part 1-4: General rules - Additional rules for stainless steel TS EN 1-3-1
tst EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect
TS EN 1993-1-5 / tst AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)
tst EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures
TS EN 1993-1-6 / tst AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)
tst EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates
TS EN 1993-1-7 / tst AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)
tst EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges
TS EN 1993-2 / tst AC Design of steel structures - Part 2: Steel bridges (eurocode 3)
tst EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles
TS EN 1993-3-1 / tst AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)
tst EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
tst EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos
TS EN 1993-4-1 / tst AC Design of steel structures - Part 4-1: Silos (eurocode 3)
tst EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses
TS EN 1993-4-2 / tst AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)
tst EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS EN 1993-4-3 / tst AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
tst EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles
tst EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
TS EN 1993-6 / tst AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS EN 1993-5 / tst AC Design of steel structures - Part 5: Piles (eurocode 3)
prEN 1090-4 -
TS 13515 / T1 Complementary standard for the implementation of TS EN 206
TSE K 506 Metal constructions for terrestrial solar power plants - Structural design, production, inspection and testing methods
TS ISO 2394 General principles for security of buildings
TS ISO 2394 General principles for security of buildings
TS EN 1381 Wooden structures - Test methods - Load bearing connections made using hooks
TS EN 1382 Wooden structures-Test methods-Retracting capacity of wood binders
TS EN 1383 Wooden structures-Test methods-Resistance of wooden elements to the tensile strength of wooden binders
TS EN 13381-3 Test methods for the determination of the contribution of structural elements to fire resistance - Part 3: Protection applied to concrete elements
TS 13515 / T2 Complementary standard for the implementation of TS EN 206
TS EN 1052-2 Masonry test methods - Part 2: Determination of flexural strength
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 14038-1 Electrochemical realkalization and chloride extraction processes for reinforced concrete - part 1: realkalization
TS EN 14358 Wooden structures - Calculation of characteristic values and acceptance criteria
TS EN 16784 Wooden structures - Test methods - Determination of long-term behavior of coated and uncoated anchor type fasteners
TS EN 845-1 + A1 Masonry - Auxiliary components - Specifications - Part 1: Ties, straps, hangers and cantilever holders
TS EN 845-2 + A1 Masonry - Auxiliary Components - Specifications - Part 2: Lintels
TS EN 845-3 + A1 Masonry - Auxiliary Components - Specifications - Part 3: Wire mesh steel reinforcement for bearing joints
TS EN 1504-8 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Evaluation and verification of quality control and performance continuity (AVCP)
TS EN 1993-1-1 / NA Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 13381-5 Test methods for the determination of the contribution of structural elements to fire resistance - Part 5: Protection applied to concrete / profiled steel sheet composite element
TSE CEN / EN 17052 EN 1090-1: Guidelines for the application of 2009 + A1: Applications of steel structures and aluminum structures - Part 2011: Requirements for conformity assessment of structural components
tst 2017114868 (TSE K 506) Metal constructions for terrestrial solar power plants - Structural design, production, inspection and testing methods
TS EN 1993-1-1 / D1 Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 1993-1-4 / NA Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-5 / NA Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect
TS EN 1993-1-8 / NA Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 845-2 + A1 Masonry - Auxiliary Components - Specifications - Part 2: Lintels
TS EN 1052-2 / AC Masonry test methods - Part 2: Determination of flexural strength
TS EN 1766 Concrete structures - Products and systems for protection and repair - Test methods - Reference concretes to be used in tests
TS EN 1090-5 Steel structure and aluminum construction applications - Part 5: Cold formed structural aluminum elements and technical requirements for roof, ceiling, floor and wall applications
TS EN 1090-5 Steel structure and aluminum construction applications - Part 5: Cold formed structural aluminum elements and technical requirements for roof, ceiling, floor and wall applications
TSE K 35 Flagpoles
TSE K 79 Modular building systems - Modular metal cabinets that can be installed and removed on site
TS EN 380 Timber - Test methods - General principles for static loading tests
TS EN 383 Wooden structures - Test methods - Determination of burying strength and defermation values for anchor type fasteners
TS EN 409 Timber - Test methods - Determination of bending moment of anchor type fasteners
TS 500 Design and construction rules of reinforced concrete structures
TS 500 / T1 Design and construction rules of reinforced concrete structures
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS EN 524-3 Steel strip sheaths - Test methods for prestressed reinforcement - Part 3: Forward-backward bending test
TS EN 524-4 Steel strip sheaths - Test methods for prestressed reinforcement part 4: Determination of resistance to lateral load
TS EN 524-6 Steel strip sheaths - Test methods for prestressed reinforcement - Part 6: Water tightness determination (water loss determination)
TS EN 595 Timber - Test methods - Determination of strength and deformation movements of trusses
TS EN 595 Timber - Test methods - Determination of strength and deformation movements of trusses
TS EN 596 Timber - Test methods - Impact impact test with a soft mass on wood-framed panels
TS 647 Calculation and construction rules of wooden structures
TS 648 Calculation and construction rules of steel structures
TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units
TS EN 846-2 Masonry - Auxiliary components - Test methods - Part 2: Determination of bond strength of pre-made horizontal joint reinforcement used in mortar joints
TS EN 846-8 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 846-11 Masonry - Auxiliary components - Test methods - Part 11: Determination of the deviation of size and shape of lintels
TS EN 846-4 / A1 Masonry-Auxiliary components-Test methods section 4: Determination of load-city characteristics and load capacities of the tapes
TS EN 846-13 Masonry - Auxiliary components - Test methods - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
TS EN 846-8 / A1 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 912 Wood binders - Properties of wood binders
TS EN 1996-3 / AC Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures
TS EN 992 Lightweight aggregate porous concrete - Determination of dry density
TS EN 1052-1 Masonry - Test methods - Section 1: Determination of compressive strength
TS EN 1052-4 Masonry-Test methods-Part 4: Determination of shear strength in joints with waterproofing layer
TS EN 1052-3 Masonry - Test methods - Part 3: Determination of initial shear strength
TS EN 1052-3 / A1 Masonry - Test methods - Part 3: Determination of initial shear strength
TS EN 1052-5 Masonry - Test methods - Part 5: Determination of bond strength by rotational forcing method
TS EN 1090-2: 2008 + A1: 2011 Steel and aluminum construction applications - Part 2: Technical requirements for steel structures
TS EN 1194 Timber - Glued laminated timber - Strength classes and determination of characteristic values
TS EN 1195 Timber - Test methods - Performance of floor covering in buildings
TS EN 1380 Wood structures - Test methods - Load-bearing nails, screws, dowels and bolts
TS EN 1504-7 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 7: Protection of reinforcement against corrosion
TS EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-4 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 4: Structural bonding
TS EN 1504-1 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 1: Recipes
TS EN 1504-10 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1504-3 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 1504-6 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 6: Anchoring of steel reinforcing bars
TS EN 1543 Concrete structures - Products and systems for protection and repair - Test methods - Determination of tensile strength increase in polymers
TS EN 1544 Concrete structures - Products and systems for protection and repair - Inspection methods - Synthetic resin products used for anchoring of reinforcing bars (pc) - Determination of creep under continuous tensile loads
TS EN 1767 Concrete structures - Products and systems for protection and repair - Test methods - Analysis for infrared light
TS EN 1771 / AC Concrete structures - Products and systems for protection and repair - Test methods - Determination of injectability and splitting test
TS EN 1799 Concrete structures - Products and systems for protection and repair - Test methods - Tests for measuring the applicability of adhesives used in the structure to the concrete surface
TS EN 1992-1-1 / AC Design of concrete structures - Part 1-1: General rules and rules applicable to buildings (eurocode 2)
TS EN 1992-2 Eurocode 2: Design of concrete structures - Part 2: Concrete bridges
TS EN 1992-1-2 Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
1992-1-1: 2004 / AC: 2010 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 1992-1-2 / AC Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (eurocode 2)
TS EN 1993-1-5 / AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)
TS EN 1993-1-12 / AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)
TS EN 1993-1-6 / AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)
TS EN 1993-1-7 / AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)
TS EN 1993-2 / AC Design of steel structures - Part 2: Steel bridges (eurocode 3)
TS EN 1993-3-1 / AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)
TS EN 1993-4-2 / AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)
TS EN 1993-4-3 / AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
TS EN 1993-4-1 / AC Design of steel structures - Part 4-1: Silos (eurocode 3)
TS EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles
TS EN 1993-1-1 Eurocode3: Design of steel structures - Part 1-1: General rules and building rules
TS EN 1993-1-2 Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)
TS EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar structures without lateral load effect
TS EN 1993-1-10 / AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)
TS EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
TS EN 1993-1-11 / AC Design of steel structures - Part 1-11: Design of structures with tensile components (eurocode 3)
TS EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures
TS EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates
TS EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
TS EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos
TS EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses
TS EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles
TS EN 1993-6 / AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS EN 1993-5 / AC Design of steel structures - Part 5: Piles (eurocode 3)
TS EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components
TS EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade
TS EN 1993-1-2 / AC Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)
TS EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1994-2 Eurocode 4: Design of steel and concrete composite structures - Part 2: General rules and rules for bridges
TS EN 1994-2 Eurocode 4: Design of steel and concrete composite structures - Part 2: General rules and rules for bridges
TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)
TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)
TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire
TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire
TS EN 1995-1-1 / AC Eurocode 5: Design of wooden structures section 1-1: General rules and building rules
TS EN 1995-2 Eurocode 5 - Design of wooden structures - Part 2: Bridges
TS EN 1995-1-1 Eurocode 5: Design of wooden structures section 1-1: General rules and building rules
TS EN 1995-1-2 Eurocode 5: Design of wooden structures section 1-2: General rules - Design of structural fire
TS EN 1995-1-1 / A1 Design of wooden structures - Part 1: General - General rules and rules to be applied to buildings (eurocode 5)
TS EN 1996-1-2 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN 1996-2 Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...
TS EN 1996-3 Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures
TS EN 1996-2 / AC Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...
TS EN 1999-1-4 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 1999-1-5 Design of aluminum structures - Part 1-5: Shell structures (eurocode 9)
TS EN 1999-1-1 / A1 Design of aluminum structures - Part 1-1: General structural rules (eurocode 9)
TS 2510 Masonry walls calculation and construction rules
TS 3233 Calculation and construction rules of prestressed concrete structures
TS 3233 / T1 Calculation and construction rules of prestressed concrete structures
TS 7720 Horizontal joints between load-bearing walls and reinforced concrete slabs - Mechanical laboratory tests - Effects of vertical loads and moments transmitted from slabs
TS EN ISO 8970 Wood structures - Testing of joints made with mechanical binders - Wood density criteria
tst 9967 Building elements, bearing systems and buildings - Prefabricated reinforced concrete and prestressed concrete - Calculation and production rules
TS EN 12188 Concrete structures - Products and systems for protection and repair - Test methods - Determination of bonding properties used in the structure by bonding steel to steel
TS EN 12192-1 Concrete structures - Determination of particle size distribution of products and systems for protection and repair - Part 1: Test method for dry components in premixed mortars
TS EN 12192-2 Concrete structures - Products and systems for protection and repair - Determination of particle size distribution - Part 2: Test method for fillers of polymeric adhesives
TS EN 12269-2 Determination of bonding behavior between reinforcing steel and aerated concrete - By beam test - Part 2: Long term test
TS EN 12269-1 Determination of bonding behavior between reinforcing steel and aerated concrete by "beam test" part 1: Short term test
TS EN 12512 Wooden structures-Test methods-Cyclic loading test for joints made with mechanical fasteners
TS EN 12614 Concrete structures - Products and systems for protection and repair - Test methods - Determination of glass transition temperature in polymers
TS EN 12615 Concrete structures - Products and systems for protection and repair - Test methods - Determination of shear strength in joining tendency
TS EN 12617-3 Concrete structures - Test methods for products and systems for protection and repair - Part 3: Determination of linear shrinkage of structural bonding materials shortly after application
TS EN 12617-1 Concrete structures - Products and systems for protection and repair - Test methods - Part 1: Determination of linear shrinkage for surface protection systems (sps) and polymers
TS EN 12618-1 Concrete structures - Products and systems for protection and repair - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility
TS EN 12637-3 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers
TS EN ISO 12944-1 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 1: General information
TS EN ISO 12944-2 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 2: Classification of the environment
TS EN ISO 12944-4 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 4: Surface types and surface preparation
TS EN ISO 12944-7 Paints and varnishes - Corrosion protection of steel structures with protective paint systems section 7: Application and inspection of painting processes
TS EN 13062 Concrete structures - Products and systems for protection and repair - Test method - Determination of water repulsion of products for protection of reinforcement
TS EN 13294 Concrete structures-Products and systems for protection and repair-Test methods-Determination of solidification time
TS EN 13391 Mechanical tests for post-tensioning systems
TS EN 13395-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 2: Determination of spreading in slurry or mortar
TS EN 13396 Concrete structures - Products and systems for protection and repair - Test methods - Chloride ion input measurement
TS EN 13578 Concrete structures - Products and systems for protection and repair - Test method - Compatibility with fresh concrete
TS EN 13580 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water absorption and resistance to alkalis for hydrophobic impregnations
TS EN 13581 Concrete structures - Products and systems for protection and repair - Test methods - Determination of mass loss after freeze thawing of hydrophobic impregnated and sliced concrete under salt pressure
TS EN 13584 Concrete constructions - Products and systems for protection and repair - Test methods - Determination of the compression of repair products under pressure
TS EN 13670 Construction of concrete structures
TS EN 13687-5 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock
TS EN 13687-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 1: Freezing immersed in de-icing salt solution - Thawing cycles
TS EN 13791 Determination of compressive strength of structures and precast concrete components in situ
TS EN 13894-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of fatigue under dynamic loads - Part 2: After hardening
TS EN 14068 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water tightness of injection filled cracks
TS EN 14250 Wooden structures - Prefabricated structural structural elements combined with riveted metal plates - Product requirements
TS EN 14374 Timber constructions - Structural laminated timber with peeling layer - Requirements
TS EN 14497 / AC Concrete structures - Products and systems for protection and repair - Test method - Determination of filtration stability stability
TS EN 14629 Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete
TS EN ISO 14713-2 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 2: Hot dip galvanizing
TS EN ISO 14713-3 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TS EN ISO 14713-3 / AC Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TSE CEN / TR 15177 Determination of freeze-thaw resistance of concrete - Structural internal damage
TS EN 15183 Concrete structures - Products and systems for protection and repair - Inspection methods - Corrosion protection test
TS EN 15184 Concrete structures - Products and systems for protection and repair - Inspection methods - Determination of adhesion of coated steel reinforcement to concrete by shear test
TS EN 15736 Wooden structures - Test methods - Tensile capacity of riveted metal plate fasteners used for the transport and assembly of prefabricated trusses
TS EN 15737 Wooden structures - Test methods - Torsional strength of screws during screwing
TS EN 1337-1 Structure of bearings - Part 1: General design rules
TS ISO 2394 General principles for security of buildings
TS ISO 2394 General principles for security of buildings
TS EN 13381-5 Test methods for the determination of the contribution of structural elements to fire resistance - Part 5: Protection applied to concrete / profiled steel sheet composite element