Concrete Structures We report the results by conducting the necessary tests and audits in our standards with our expert staff. We provide testing, inspection and certification services to all of the following standards.
TS EN 524-1 Steel strip sheaths - Test methods for prestressed reinforcement - Part 1: Determination of shape and dimensions
TS EN 524-2 Steel strip sheaths - Test methods for prestressed reinforcement part 2: Determination of bending behavior
TS EN 524-5 Steel strip sheaths - Test methods for prestressed reinforcement - Part 5: Determination of resistance to tensile load
TS EN 1770 Concrete structures - Products and systems for protection and repair - Test methods - Determination of heat expansion coefficient
TS EN 12189 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the processing time of the adhesives used in the structure
TS EN 1542 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adhesion strength by pulling method
TS EN 1877-1 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 1: Determination of epoxy equivalents
TS EN 1877-2 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 2: Determination of amine functions using the total number of bases
TS EN 1992-1-1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 12617-4 Concrete structures - Test methods for products and systems for protection and repair - Part 4: Determination of shrinkage and expansion
TS EN 13057 Concrete structures - Test methods for products and systems for protection and repair - Determination of resistance to capillary water absorption
TS EN 13062 Concrete structures - Products and systems for protection and repair - Test method - Determination of water repulsion of products for protection of reinforcement
TS EN 13294 Concrete structures-Products and systems for protection and repair-Test methods-Determination of solidification time
TS EN 13391 Mechanical tests for post-tensioning systems
TS EN 13395-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 2: Determination of spreading in slurry or mortar
TS EN 13396 Concrete structures - Products and systems for protection and repair - Test methods - Chloride ion input measurement
TS EN 13578 Concrete structures - Products and systems for protection and repair - Test method - Compatibility with fresh concrete
TS EN 13580 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water absorption and resistance to alkalis for hydrophobic impregnations
TS EN 13581 Concrete structures - Products and systems for protection and repair - Test methods - Determination of mass loss after freeze thawing of hydrophobic impregnated and sliced concrete under salt pressure
TS EN 13584 Concrete constructions - Products and systems for protection and repair - Test methods - Determination of the compression of repair products under pressure
TS EN 13670 Construction of concrete structures
TS EN 13687-5 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock
TS EN 13687-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 1: Freezing immersed in de-icing salt solution - Thawing cycles
TS EN 13791 Determination of compressive strength of structures and precast concrete components in situ
TS EN 13894-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of fatigue under dynamic loads - Part 2: After hardening
TS EN 14068 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water tightness of injection filled cracks
TS EN 14497 / AC Concrete structures - Products and systems for protection and repair - Test method - Determination of filtration stability stability
TS EN 14629 Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete
TS EN 13579 Concrete structures-Products and systems for protection and repair-Test methods-Drying test for hydrophobic impregnation
TS EN 13687-1 Concrete structures-Products and systems for protection and repair-Test methods-Determination of thermal compatibility-Part 1: Freezing in de-icing salt-Thawing test
TS EN 13687-2 Concrete structures-Products and systems for protection and repair-Test methods-Determination of thermal compatibility-Part 2-Heavy rain repetitions (thermal shock)
TS EN 13687-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 3: Thermal cycle without de-icing salt effect
TS EN 13687-4 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility section 4: Dry
TS EN 13687-5 Concrete structures - Test methods for products and systems for protection and repair - Determination of thermal compatibility - Part 5: Resistance to heat shocks
TS EN 13733 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the strength of structural bonding materials
TS EN 13395-1 Concrete structures-Products and systems for protection and repair-Test methods-Determination of workability-Part 1: Fluid determination test of water-repellent mortars
TS EN 13395-4 Concrete structures-Products and systems for protection and repair-Test methods-Determination of machinability-Part 4: Application of repair mortars used on the surface
TS EN 13395-2 Concrete structures-Products and systems for protection and repair-Test methods-Determination of workability-Part 2: Free and mortar flow test
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods, determination of workability - Part 3: Test for the fluency of repair concrete
TS EN 13057 Concrete structures - Products and systems for protection and repair - Test methods - Determination of resistance to capillary water absorption
TS EN 13579 Concrete structures - Products and systems for protection and repair - Test methods - Drying test for hydrophobic impregnation
TS EN 13687-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 2: Rain effect with high temperature difference (thermal shock)
TS EN 13687-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 3: Thermal cycles without de-icing salt effect
TS EN 13687-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 4: Thermal cycles in dry environments
TS EN 13733 Concrete structures - Products and systems for protection and repair - Test methods - Determination of strength of adhesives used in construction
TS EN 13395-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 1: Spatial determination of thixotropic mortars
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 3: Determination of spreading in repair concrete
TS EN 13395-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 4: Application of repair mortars used in ceilings
TS EN 13529 Concrete structures - Products and systems for protection and repair - Test methods - Resistance to severe chemical effects
TS EN 1504-10 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 1771 Concrete structures - Products and systems for protection and repair - Test methods - Determination of injectability and splitting test
TS EN 12617-2 Concrete structures - Products and systems for protection and repair - Test methods - Part 2: Shrinkage of cracked injection products with polymer binders: Volumetric shrinkage
TS EN 12618-2 Concrete structures - Products and systems for protection and repair - Test methods - Part 2: Determination of adhesion of injection products with or without thermal cycling - Determination of adhesion by bond tensile strength
TS EN 12618-3 Concrete structures - Products and systems for protection and repair - Test methods - Part 3: Determination of adhesion of injection products with or without thermal cycling - Inclined cutting method
TS EN 12637-1 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete
TS EN 14406 Concrete structures - Products and systems for protection and repair - Test methods - Determination of expansion rate and evaluation of expansion
TS EN 14497 Concrete structures - Products and systems for protection and repair - Test method - Determination of filtration stability stability
TS EN 14498 Concrete structures - Products and systems for protection and repair - Volume and mass changes at the end of air drying and retention cycles in water
TS EN 1504-2 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-4 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 4: Structural bonding
TS EN 12614 Concrete structures - Products and systems for protection and repair - Test methods - Determination of glass transition temperature of polymers
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning
TS EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and building rules
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS EN 1504-3 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 1504-10 / AC Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 1504-6 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 6: Anchoring of steel reinforcing bars
TS EN 1504-7 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 7: Corrosion protection of reinforcement
TS EN 1992-3 Eurocode 2: Design of concrete structures - Part 3: Fluid retention and storage structures
TS EN 13412 Concrete structures - Products and systems for protection and repair - Test methods - Determination of modulus of elasticity in pressure
TS EN 13791 Determination of compressive strength in situ of structures and precast concrete components
TS EN 1504-10 / AC Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1994-2 / AC Design of steel and concrete composite structures - Part 2: General rules and rules to be applied to bridges (eurocode 4)
TS EN 13670 Construction of concrete structures
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules for buildings (eurocode 4)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TSE CEN / TR 15177 Determination of freeze-thaw resistance of concrete - Structural internal damage
TS EN 1994-1-1 Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 15241 / AC Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 12617-4 Concrete structures - Test methods for products and systems for protection and repair - Part 4: Determination of shrinkage and expansion
TS 13606 Tensile strength of concrete surfaces and test method for determination of bond strength or tensile strength of concrete repair and coating materials by direct tensile method (pull-off method)
TS 13609 Test method for the evaluation of asphalt-paved reinforced concrete bridge decks using soil radar (GPR) technique
TS EN 13412 Concrete structures - Products and systems for protection and repair - Test methods - Determination of modulus of elasticity in pressure
TS EN 991 Gas concrete or lightweight aggregate porous concrete - Determination of pre-structured components
TS ISO 16204 Durability - Service life design of concrete structures
TS 13515 Complementary standard for the implementation of TS EN 206
TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 1992-2 Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 1992-3 Design of concrete structures - Part 3: Liquid retention and containment structures (Eurocode 2)
TS 13685 On-site determination of compressive strength in structures and precast concrete components - Complementary standard for the application of TS EN13791
TS 500 / T3 Design and construction rules of reinforced concrete structures
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 1994-1-2 / tstA1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 13391 Mechanical tests for post-tensioning systems
TS EN 13294 Concrete structures - Products and systems for protection and repair - Test methods - Determination of curing time
TS EN 13578 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility with fresh concrete
TS EN 13580 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water absorption and resistance to alkalis for hydrophobic impregnations
TS ISO 16204 Durability - Lifecycle design of concrete structures
TS EN 1992-1-1 / A1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
tst 2015104593 Sealing rules for joints in concrete structures with water retaining gasket
TS 13515 / T1 Complementary standard for the implementation of TS EN 206
TS EN 13381-3 Test methods for the determination of the contribution of structural elements to fire resistance - Part 3: Protection applied to concrete elements
TS 13515 / T2 Complementary standard for the implementation of TS EN 206
TS EN 14038-1 Electrochemical realkalization and chloride extraction processes for reinforced concrete - part 1: realkalization
TS EN 1504-8 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Evaluation and verification of quality control and performance continuity (AVCP)
TS EN 1766 Concrete structures - Products and systems for protection and repair - Test methods - Reference concretes to be used in tests
TS 500 Design and construction rules of reinforced concrete structures
TS 500 / T1 Design and construction rules of reinforced concrete structures
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS EN 524-3 Steel strip sheaths - Test methods for prestressed reinforcement - Part 3: Forward-backward bending test
TS EN 524-4 Steel strip sheaths - Test methods for prestressed reinforcement part 4: Determination of resistance to lateral load
TS EN 524-6 Steel strip sheaths - Test methods for prestressed reinforcement - Part 6: Water tightness determination (water loss determination)
TS EN 992 Lightweight aggregate porous concrete - Determination of dry density
TS EN 1504-7 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 7: Protection of reinforcement against corrosion
TS EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-4 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 4: Structural bonding
TS EN 1504-1 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 1: Recipes
TS EN 1504-10 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1504-3 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 1504-6 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 6: Anchoring of steel reinforcing bars
TS EN 1543 Concrete structures - Products and systems for protection and repair - Test methods - Determination of tensile strength increase in polymers
TS EN 1544 Concrete structures - Products and systems for protection and repair - Inspection methods - Synthetic resin products used for anchoring of reinforcing bars (pc) - Determination of creep under continuous tensile loads
TS EN 1767 Concrete structures - Products and systems for protection and repair - Test methods - Analysis for infrared light
TS EN 1771 / AC Concrete structures - Products and systems for protection and repair - Test methods - Determination of injectability and splitting test
TS EN 1799 Concrete structures - Products and systems for protection and repair - Test methods - Tests for measuring the applicability of adhesives used in the structure to the concrete surface
TS EN 1992-1-1 / AC Design of concrete structures - Part 1-1: General rules and rules applicable to buildings (eurocode 2)
TS EN 1992-2 Eurocode 2: Design of concrete structures - Part 2: Concrete bridges
TS EN 1992-1-2 Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
1992-1-1: 2004 / AC: 2010 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 1992-1-2 / AC Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (eurocode 2)
TS EN 1994-2 Eurocode 4: Design of steel and concrete composite structures - Part 2: General rules and rules for bridges
TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)
TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire
TS 3233 Calculation and construction rules of prestressed concrete structures
TS 3233 / T1 Calculation and construction rules of prestressed concrete structures
TS 3764 Concrete blocks - Mines - Used in underground road support
TS 7720 Horizontal joints between load-bearing walls and reinforced concrete slabs - Mechanical laboratory tests - Effects of vertical loads and moments transmitted from slabs
tst 9967 Building elements, bearing systems and buildings - Prefabricated reinforced concrete and prestressed concrete - Calculation and production rules
TS EN 12188 Concrete structures - Products and systems for protection and repair - Test methods - Determination of bonding properties used in the structure by bonding steel to steel
TS EN 12192-1 Concrete structures - Determination of particle size distribution of products and systems for protection and repair - Part 1: Test method for dry components in premixed mortars
TS EN 12192-2 Concrete structures - Products and systems for protection and repair - Determination of particle size distribution - Part 2: Test method for fillers of polymeric adhesives
TS EN 12269-2 Determination of bonding behavior between reinforcing steel and aerated concrete - By beam test - Part 2: Long term test
TS EN 12269-1 Determination of bonding behavior between reinforcing steel and aerated concrete by "beam test" part 1: Short term test
TS EN 12614 Concrete structures - Products and systems for protection and repair - Test methods - Determination of glass transition temperature in polymers
TS EN 12615 Concrete structures - Products and systems for protection and repair - Test methods - Determination of shear strength in joining tendency
TS EN 12617-3 Concrete structures - Test methods for products and systems for protection and repair - Part 3: Determination of linear shrinkage of structural bonding materials shortly after application
TS EN 12617-1 Concrete structures - Products and systems for protection and repair - Test methods - Part 1: Determination of linear shrinkage for surface protection systems (sps) and polymers
TS EN 12618-1 Concrete structures - Products and systems for protection and repair - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility
TS EN 12637-3 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers
TSE CEN / TR 15177 Determination of freeze-thaw resistance of concrete - Structural internal damage
TS EN 15183 Concrete structures - Products and systems for protection and repair - Inspection methods - Corrosion protection test
TS EN 15184 Concrete structures - Products and systems for protection and repair - Inspection methods - Determination of adhesion of coated steel reinforcement to concrete by shear test
TS EN 595 Timber - Test methods - Determination of strength and deformation movements of trusses