Building Materials and Buildings, Protection Standards in Buildings

Protection in Buildings All the procedures specified in the standard are tested by applying all the necessary methods to perform your certification process.

TS EN 20140-2 Acoustics - Measurement of sound insulation in buildings and structural elements - Part 2: Determination, verification and application of precision information

TS EN 29052-1 Acoustic-Determination of dynamic stiffness-Section1 materials used under residential flexible flooring

TS EN ISO 11654 Acoustics - Sound absorbers used in buildings - Grading of sound absorption

TS EN 1946-1 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties section 1: General criteria

TS EN 1946-2 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 2: Enclosed hot plate method

TS EN 1946-3 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurement using heat flow meter method

TS EN 12354-1 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 1: Insulation of airborne noise between rooms

TS EN 12354-2 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 2: Insulation of impact sound between rooms

TS EN 12354-4 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 4: Transmission of sound inside

TS EN 1946-4 Thermal performance of building materials and components - Specific criteria for the evaluation of laboratories where heat transfer properties are measured - Part 4: Measurements with hot box methods

TS EN ISO 8990 Thermal insulation - Determination of steady state heat conduction properties - Calibrated and enclosed hot box

TS EN 1998-3 Design of earthquake resistant structures - Part 3: Evaluation and strengthening of buildings (Eurocode 8)

TS EN 12354-4 Building acoustics - Calculation of the acoustic performance of buildings from the performance of the elements - Part 4: Transmission of internal sound to the outside

TS EN 12354-1 Building acoustics - Calculation of the acoustic performance of buildings from the performance of elements - Part 1: Insulation of airborne noise between rooms

TS EN 12354-2 Building acoustics - Calculation of the acoustic performance of buildings from the performance of elements - Part 2: Insulation of impact noise between rooms

TS EN 1946-3 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurements by heat flow meter method

TS EN ISO 10534-1 Acoustic- Sound absorption coefficient and impedance determination in impedance pipes - Part 1: Method of using the standing wave ratio

TS EN 12865 Hygothermal performance of building components and building elements - Determination of the resistance of all exterior wall systems to heavy rain under air pressure

TS EN 12664 Thermal performance of building materials and products - Determination of heat treatment resistance by enclosed hot plate and heat flow meter methods - Medium and low heat resistant dry and humid products

TS EN ISO 13793 Thermal performance of buildings - Thermal design of foundations to prevent the expansion effect of ice

TS EN 12354-3 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 3: Insulation of airborne noise against outside noise

TS EN 12412-2 Thermal performance of windows, doors and shutters-Determination of thermal conductivity by hot box method 2: Framework

TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal permeability by hot box method 4: Movable louver boxes

TS EN ISO 15186-1 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 1: Laboratory measurements "

TS EN ISO 15927-1 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 1: Monthly average of individual meteorological elements "

TS EN 13187 Thermal performance in buildings - Qualitative determination of thermal irregularities on building surfaces - Infrared method

TS EN 12412-2 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 2: Frames

TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 4: Roll louver boxes

TS EN 12354-6 Building acoustics -Calculation of acoustic performance of structures from the performance of elements - Part 6: Sound absorption in confined spaces

TS EN ISO 13790 Energy performance of buildings - Calculation of energy use for space heating and cooling

TS EN ISO 15927-5 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 5 - Outdoor temperatures and related wind data for winter design

TS 3078 Building construction - Joint sealing materials - Pvc plastic waterstop seals

tst EN 1998-1 Earthquake resistant design - General rules, seismic effects and rules for buildings

TS EN 1998-5 Design of earthquake resistant structures - Part 5: Foundations, retaining structures and geotechnical considerations

TS EN ISO 15927-4 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 4 - Hourly data used to evaluate annual energy use for heating and cooling

TS EN ISO 354 Measurement of acoustic-sound absorption in the resonant chamber

TS EN ISO 10848-1 Acoustics - Laboratory measurement of lateral transmission of airborne sound and impact sound between adjacent rooms - Part 1: Framework document

TS EN ISO 10848-2 Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory - Part 2: Application for lightweight elements where the coupling effect is low

TS EN ISO 10848-3 Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory - Part 3: Application for lightweight elements where the coupling effect is significant

TS EN ISO 18233 Acoustics - Application of new measurement methods in building and room acoustics

TS EN ISO 10848-2 / AC Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory - Part 2: Application for lightweight elements where the coupling effect is low

TS EN 12664 Building materials and products - Determination of thermal resistance by means of protected table heater and heat flux meter - Dry and damp products with medium and low thermal resistance

TS EN 1997-2 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)

TS EN ISO 15927-6 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 6 - Accumulated temperature differences (degrees-days)

tst 11758-1 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 1: Specifications

TS EN ISO 10211 Thermal bridges in building structures - Heat flows and surface temperatures - Detailed calculation methods

TS EN ISO 13789 Thermal performance of buildings-Transmission heat loss coefficient-Calculation method

TS EN ISO 11691 Acoustics - Measurement of insertion loss of flow-through duct silencers - Laboratory research method

tst EN 1998-4 Design of earthquake resistant structures - Part 4: Silos, tanks and pipelines

TSE K 11 Cement and acrylic based, two component, semi-flexible waterproofing material

TS EN ISO 3382-1 Acoustics - Measuring acoustic parameters of rooms - Part 1: Performance gaps

TS EN ISO 11691 Acoustics - Measurement of joint loss of flow-through duct silencers - Laboratory research method

10077-1 / AC Thermal performance of windows, doors and louvers - Calculation of heat conduction - Part 1: Simplified method

TS EN ISO 10456 / AC Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of declared and design thermal values

TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)

TS ISO 3867 Combined anglomerate fungus (composite fungus) - Expansion joint filler materials - Test methods

TS EN ISO 12567-1 Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 1: Complete windows and doors

TS EN 61400-24 Wind turbines - Part 24: Protection against lightning

TS EN ISO 15186-3 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 3: Laboratory measurements at low frequencies

TS EN ISO 15186-2 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 2: Area measurements

TS EN ISO 10140-3 Acoustics - Laboratory measurement of sound insulation in building elements - Part 3: Measurement of impact sound insulation

TS EN ISO 10140-2 Acoustics - Laboratory measurement of sound insulation in building elements - Part 2: Measurement of airborne sound insulation

TS EN ISO 23993 Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity

TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification

TS EN 62305-1 Lightning protection - Part 1: General rules

TS EN 62305-4 Lightning protection - Part 4: Electrical and electronic systems in buildings

TS EN 62305-3 Lightning protection - part 3: Physical damage to buildings and life-threatening

TS EN 673 Used in glass structures - Determination of heat conductivity (u value) - Calculation method

TS EN 62305-1 Lightning protection - Part 1: General rules

TS EN 62305-4 Lightning protection - Part 4: Electrical and electronic systems in buildings

TS EN 62305-3 Lightning protection - Part 3: Physical damage to buildings and life-threatening

TS EN 62561-4 Lightning protection system components (YKSB) - Part 4: Specification for conductor connectors

TS EN 50536 Lightning protection - Severe storm warning systems

TS EN 50536 Lightning protection - Lightning storm warning systems

TS EN 62561-5 Lightning protection components (LPSC) - Part 5: Specification for ground electrode inspection enclosures and ground electrode seals

TS EN 62561-6 Lightning protection components (lpsc) - Part 6: Specification for lightning impact counters (lsc)

TS EN 1998-2 / A2 Eurocode 8: Design of earthquake resistant structures - Part 2: Bridges

TS 825 Thermal insulation rules in buildings

tst EN 1998-2 Earthquake resistant design - Part 2: Bridges

TS EN 1998-2 Design of earthquake resistant structures - Part 2: Bridges (eurocode 8)

TS EN 1998-2 / A1 Design of earthquake resistant structures - Part 2: Bridges (eurocode 8)

TS EN 1998-2 / AC Design of earthquake resistant structures - Part 2: Bridges (eurocode 8)

TS EN ISO 3382-3 Acoustics - Measuring room acoustic parameters - Part 3: Open plan offices

TS EN ISO 10077-2 Thermal performance of doors, windows and shutters - Calculation of thermal conduction - Part 2: Numerical method for safes

TS EN ISO 13791 Thermal performance in buildings - Calculation of temperature in a room without mechanical cooling - General criteria and verification procedures

TS EN 1745 Masonry and masonry products - Methods for determination of thermal properties

TS 2810 Building construction - Joint sealing materials - Rubber waterstop seals

TS EN 15232: 2012 (EN) Energy performance of buildings - Estimated results of building automation, control and building management

Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927 - Outdoor temperatures and related wind data for winter season design TS EN ISO 5-1 / A5

TS EN 50536 / A1 Lightning protection - Lightning storm warning systems

TS EN ISO 10140-2 Acoustics - Measurement of sound insulation of structural elements in the laboratory - Part 2: Measurement of airborne sound insulation

TS EN ISO 10140-3 Acoustics - Measurement of sound insulation of structural elements in the laboratory - Part 3: Measurement of impact sound insulation

TS EN ISO 10140-4 Acoustics - Measurement of sound insulation of structural elements in the laboratory - Part 4: Measurement procedures and rules

TS EN ISO 10848-1 Acoustics - Laboratory measurement of lateral transmission of airborne sound and impact sound between adjacent rooms - Part 1: Framework document

TS EN ISO 10848-2 Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory

TS EN ISO 10848-3 Acoustics - Laboratory measurement of lateral transmission of air-borne sound and impact sound between adjacent rooms

TS EN ISO 10848-4 Acoustics - Laboratory measurement of lateral sound and airborne sound transmission between adjacent rooms - Part 4: Application for connections with at least one heavy element

TS 2491 / revision Sound insulation materials-Made of polystyrene hard foam plastics (used for impact sound insulation in buildings)

TS EN ISO 10140-5 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for plant and test equipment for testing

TS EN ISO 3382-1 Acoustics - Measurement of acoustic parameters of rooms - Part 1: Showrooms (ISO 3382-1-2009)

ISO EN ISO 3382-2 Acoustics - Measurement of acoustic parameters of rooms - Part 2: Tinnitus time in ordinary rooms (ISO 3382-2-2008)

ISO EN ISO 3382-3 Acoustics - Measuring acoustic parameters of rooms - Part 3: Open offices (ISO 3382-3-2012)

TS EN ISO 3382-2 / AC Acoustics - Measurement of acoustic parameters of rooms - Part 2: Tinnitus time in ordinary rooms

TSE K 136 / Revision Thermal and waterproofing products - Used in buildings - Polyurethane and Polypropylene

TSE K 137 / Revision Thermal and waterproofing products - Used in buildings - Polyurethane and polyester

TS EN 62305-3 / tst A11 Lightning protection - Part 3: Physical damage to buildings and life-threatening

TS EN ISO 12631 Thermal performance of curtain wall - Calculation of thermal permeability

TS EN 62561-7 Lightning protection system components (lpsc) - Part 7: Features for improvement of grounding components

TS EN ISO 13792 Thermal performance in buildings - Calculation of temperature in a room without mechanical cooling in summer - Simplified methods

TS EN 62305-2 Lightning protection - Part 2: Risk management

TS EN 50536 / A1 Lightning protection - Lightning storm warning systems

TS EN 12354-5 Building acoustics - Calculation of acoustic performance of structures from the performance of elements - Part 5: Sound levels from service equipment

TS EN 12354-5 / AC Building acoustics - Calculation of acoustic performance of buildings from the performance of elements - Part 5: Sound levels from service equipment

TS EN ISO 15186-1 Measurement of sound insulation in buildings and building elements using acoustic-sound intensity - Part 1: Laboratory measurements (ISO 15186-1: 2000)

TS EN ISO 15186-2 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 2: Measurements in structure (ISO 15186-2: 2003)

ISO EN ISO 15186-3 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 3: Laboratory measurements at low frequencies (ISO 15186-3: 2002)

TS EN ISO 10848-2 / AC Acoustics - Laboratory measurement of lateral transmission of air-borne sound and impact sound between adjacent rooms - Part 2: Application for lightweight elements in cases where the coupling effect is low

TS EN 62305-2 Lightning protection - Part 2: Risk management

10077-2 / AC Thermal performance of doors, windows and louvers - Calculation of thermal conductivity - Part 2: Numerical methods for frames

TS EN 62561-1 Lightning protection system components (YKSB) - Part 1: Specification for fasteners

TS EN 62561-2 Lightning protection system components (YKSB) - Part 2: Specification for conductors and grounding electrodes

TS EN ISO 12569 Thermal insulation of buildings- Determination of air change in buildings- Tracer gas method

TS EN 62561-3 Lightning protection system components (YKSB) - Part 3: Specification for spark gap insulation gaps

TS EN ISO 13788 Thermal performance of building components and building elements in humid environment - Internal surface temperature to prevent critical surface moisture and condensation inside building components - Calculation methods

TS EN ISO 717-2 Acoustics - Evaluation of sound insulation in building elements and buildings - part 2: Impact sound insulation

TS EN 1998-1: 2004 / A1 Eurocode 8: Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings

TS EN 822 Thermal insulation materials for buildings - Determination of length and width

TS EN 823 Thermal insulation materials for buildings - Determination of thickness

TS EN 824 Thermal insulation materials-Determination of deviation from the square for buildings

TS EN 825 Thermal insulation materials for buildings - Determination of surface flatness

TS EN 826 Thermal insulation products - For buildings - Determination of pressure behavior

TS EN 1602 Thermal insulation materials for buildings - Determination of apparent density

TS EN 1604 Thermal insulation materials for buildings-Determination of dimensional stability under certain temperature and humidity conditions

TS EN 1605 Thermal insulation materials for buildings-Determination of deformation under certain pressure load and temperature conditions

TS EN 1606 Thermal insulation materials for buildings Determination of creep under pressure

TS EN 1607 Thermal insulation materials for buildings - Determination of tensile strength perpendicular to surfaces

TS EN 1608 Thermal insulation materials - For buildings - Determination of tensile strength parallel to surfaces

TS EN 12089 Thermal insulation materials for buildings - Determination of bending behavior

TS EN 16035: 2012 Hardware performance document (HPS) - Determination and summarization of experimental evidence for fire resistance and / or smoke control door systems and / or openable window applications for the common use of building hardware

TS EN ISO 717-1 Acoustics - Evaluation of sound insulation in buildings and building elements - Part 1: Sound insulation from air

Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Monthly averages of individual meteorological variables (ISO 1-1: 15927)

TS EN ISO 15927-2 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 2: Hourly data for calculation of design-based cooling load (ISO 15927-2: 2009)

Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Calculation of wind-striking rain index from hourly wind and rain data for vertical surfaces (ISO 3-3: 15927)

Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Hourly data for evaluation of annual energy use for heating and cooling (ISO 4-4: 15927)

TS EN ISO 15927-5 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 5: Data used in the calculation of the design heat load for space heating (ISO 15927-5: 2004)

TS EN ISO 15927-6 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 6: Accumulated temperature differences (degrees-days)

TS EN 674 - Thermal conductivity (u value) used in glass structures - Enclosed hot plate method

TS EN 16205 Laboratory measurement of walking noise on soils

TS EN 81-77 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 77: Elevators subject to seismic conditions

TS EN 1998-3 / AC Eurocode 8: Design of earthquake resistant structures section 3: Evaluation and strengthening of buildings

TS EN 14496 Gypsum based adhesives - For composite sheets and gypsum sheets for thermal / sound insulation - Definitions, requirements and test methods

TS EN ISO 717-1 Acoustics - Grading of sound insulation in buildings and structural components - Part 1: Sound insulation from air (ISO 717-1: 2013)

TS EN 14759 Louvers - Acoustic insulation for airborne sound - Demonstrating performance

TS EN 12429 Thermal insulation materials - For buildings - Conditioning to moisture balance under certain temperature and humidity conditions

TS EN 1998-3 / AC Design of earthquake resistant structures - Part 3: Evaluation and strengthening of buildings (Eurocode 8)

Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Data used in the calculation of the heat load based on design for space heating (ISO 5: 1: 5 / Amd 15927: 5)

TS EN 1998-1 Earthquake resistant construction design - Part 1: General rules, seismic effects and rules for buildings (Eurocode 8)

TS EN 1998-1 / AC Earthquake resistant construction design - Part 1: General rules, seismic effects and rules for buildings (Eurocode 8)

tst EN 1997-2 Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)

TS EN 1997-2 / tst AC Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)

TS EN ISO 16283-1 Acoustics - Area measurement of sound insulation in building elements and structures - Part 1: Insulation of airborne sound (ISO 16283-1: 2014)

TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method (ISO 10052: 2004)

TS EN 16205 Laboratory measurement of noise caused by walking on soils

tst EN ISO 140-14 Acoustics - Measurement of sound insulation in buildings and building components - Part 14: Guidance on special terrain situations

ISO EN ISO 717-2 Acoustics - Grading of sound insulation in buildings and components - Part 2: Impact sound insulation (ISO 717-2: 2013)

TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)

TS EN ISO 16283-1 Acoustics - Field measurements for sound insulation of structures and structural elements - Part 1: Insulation of airborne sound (ISO 16283-1: 2014)

TS EN 12811-4 Temporary work equipment - Part 4: Protection fans for scaffolding - Performance requirements and product design

TS EN 13363-1 + A1 Means of sun protection combined with glazing - Calculation of sun and light transmission - Part 1: Simplified method

TS EN 13363-1 + A1 / AC Sun protection devices combined with glazing - Calculation of sun and light transmission - Part 1: Simplified method

TS EN 13363-2 Means of sun protection combined with glazing - Calculation of total solar and light transmittance - Part 2: Detailed calculation method

TS EN 13363-2 / AC Sun protection devices combined with glazing - Calculation of total solar and light transmittance - Part 2: Detailed calculation method

TS EN 1998-2 Earthquake resistant design - Part 2: Bridges (Eurocode 8)

TS 13427 Authorized services - Lightning protection systems - rules

ISO EN ISO 10140-5 / A1 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for plant and test equipment to be tested - A1: Rain sound (ISO 10140-5: 2010 / Amd1: 2014)

TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation

TS EN ISO 16251-1 Acoustic-Laboratory measurement of the impact sound reduction from the floor covering on a small floor model - Part 1: Heavy compact floor

TS 13658 Plastic and Rubber based synthetic covers - Used for Waterproofing of Roofs and Foundations - Application Rules

TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems (ISO 15758: 2014)

TS EN ISO 7235 Acoustics - Laboratory measurement procedures for silencers and air termination units mounted in the ventilation duct - Interrupt loss, flow noise and total pressure loss (ISO 7235: 2003)

TS 11758-1 / T2 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 1: Specifications

TS 13671 Waterproofing and moisture insulation with polymer modified bitumen based thick coatings - General requirements and application rules for foundation and curtain insulation

TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation

TS EN 1998-2 / AC Earthquake resistant design - Part 2: Bridges (Eurocode 8)

TS EN 1998-2 / A2 Earthquake resistant construction design - Part 2: Bridges (Eurocode 8)

TS EN 1998-2 / A1 Earthquake resistant construction design - Part 2: Bridges (Eurocode 8)

TS EN ISO 10456 Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of declared and design thermal values (ISO 10456: 2007)

TS EN ISO 10456 / AC Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of design and thermal values - Technical correction 1 (ISO 10456: 2007 / Cor 1: 2009)

TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification

TS EN ISO 16251-1 Acoustic-Laboratory measurement of the impact sound reduction from the floor covering on a small floor model - Part 1: Heavy compact floor

TS EN 62561-1 Lightning protection system components (LPSC) - Part 1: Requirements for connection components

TS EN 62561-2 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and grounding electrodes (IEC 62561-2: 2012, modified)

TS EN 62561-3 Lightning protection system components (LPSC) - Part 3: Requirements for insulating arc horns (IEC 62561-3: 2012, modified)

TS EN 62561-4 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners (IEC 62561-4: 2010, modified)

TS EN 62561-5 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection enclosures and earth electrode seals (IEC 62561-5: 2011, modified)

TS EN 62561-6 Lightning protection system components (LPSC) - Part 6: Rules on lightning impact counters (LSC) (IEC 62561-6: 2011, modified)

TS EN 62561-7 Lightning protection system components (LPSC) - Part 7: Rules on earth-strengthening compounds (IEC 62561-7: 2011, modified)

TS EN 16487 Acoustics - Test code for suspended ceilings - Sound absorption

TS EN ISO 13791 Thermal performance in buildings - Calculation of temperature in a room without mechanical cooling - General criteria and verification procedures

TS EN 15255 Energy performance of buildings - Calculation of reasonable load for room cooling - General criteria and validation procedures

TS EN 15232: 2012 (EN) Energy performance of buildings - Estimated results of building automation, control and building management

TS EN 15603 Energy performance of buildings - General energy use and description of energy values

TS EN ISO 140-18 Acoustics - Measurement of sound insulation properties of structures and building elements - Part 18 - Measurement of sound generated by rain falling on building elements in the laboratory

TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and descriptions (ISO 9288: 1989)

TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems

tst EN 1997-1 Geotechnical design - Part 2: General rules (Eurocode 7)

TSE K 499 INSULATION GLASS UNIT (FROM ALUMINUM ALLOY MATERIAL) INTERIOR SPACE PROFILE

TSE K 463 Copper busbars - Annealed and tinned flexible braided - Construction and tests

TS ISO 4866 Mechanical vibration and shock - Vibration of buildings - Guidance for measuring vibration and evaluating effects on buildings

TS 13709 Lightning protection - lightning rods

TS EN ISO 10140-3 / A1 Acoustics - Laboratory measurement of sound insulation in building elements - Part 3: Measurement of impact sound insulation - Modified 1

TSE K 308 / T1 Organic or inorganic binder coatings applied indoors

TS EN ISO 9972 Thermal performance of buildings- Determination of air permeability of buildings - Holding pressure under fan pressure

TS EN 62858 Lightning intensity (LLC) based on lightning protection systems - General rules

TS EN 16508 Temporary work equipment - Curtain walls - Performance requirements and overall design

TS EN ISO 16283-3 Area measurement of sound insulation in acoustic-structural elements and structures - Part 3: Sound insulation in the first stage

TS EN ISO 16283-2 Sound measurement of acoustic components and structures - Part 2: Impact sound insulation

TS EN 16703 Acoustics - Test rule for steel screwed gypsum board systems - Insulation of airborne sound

TS 13780 Waterproofing products for ceramic tiles - Application rules

TS ISO 3867 Combined anglomerate fungus (composite fungus) - Expansion joint filler materials - Test methods

TS EN ISO 6781-3 Glass used in buildings - Determination of heat, air and moisture irregularities in buildings using infrared methods - Part 3: Qualification of device users, data analysts and reporters

TS EN ISO 10140-1 Acoustics - Laboratory measurement of sound insulation in building elements

TS EN ISO 12572 Performance of the materials and products used in buildings in relation to heat and humidity - Determination of water vapor transmission properties - Cup method

TS 13766 Waterproofing with sliding waterproofing materials - General requirements and application rules for basic and curtain insulations

TS EN 62305-1 / AC Lightning protection - Part 1: General rules

TS EN 62305-4 / AC Lightning protection - Part 4: Electrical and electronic systems in buildings

TS 13777 Composite panels - Polyethylene or mineral filled - Both sides covered with aluminum plate

tst EN 1604 Thermal insulation materials for buildings - Determination of dimensional stability under certain temperature and humidity conditions

prEN 81-77 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 77: Elevators subject to seismic conditions

TS EN 15129 Anti - Seismic devices

TS 13709 / T1 Lightning protection - lightning rods

TSE CEN / EN 15193-2: 2017 Energy performance in buildings - Energy requirements for lighting - Part 2: EN 15193-1 Module M9

TS EN 15193-1 Energy performance in buildings - Energy requirements for lighting - Part 1: Specifications, Module M9

TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals

TS 113 Roofing - Bitumen emulsions used as protective coatings - Specifications

TS 132 Roofing - Bitumen emulsions used as protective coatings - Test methods

TS EN ISO 140-12 Acoustics - Measurement of sound insulation in structures and structural elements - Part 12: Laboratory measurements of sound insulation radiated from the room by air and impact on an accessible ground floor

TS EN ISO 140-18 Acoustics - Measurement of sound insulation in buildings and building elements - Part 16: Measurement of rain noise on building elements in the laboratory

TS 306 Asphalt used in foundations and vertical surfaces, moisture and waterproofing

TS EN ISO 354 Acoustics - Measurement of sound absorption in the ringing room

TS EN 674: 2011 Glass-Thermal conductivity (u value) determination-Enclosed hot plate method

TS ISO 727-2 Straight pipe head fittings for pressure pipes - Made of polyvinylchloride (pvc-U), chlorinated polyvinylchloride (pvc) or acrylonitrile / butadiene / styrene (abs) without plasticizer - Part sockets - Part 1: Metric series

TS ISO 727-1 Straight pipe head fittings for pressure pipes - Made of polyvinylchloride (pvc-U), chlorinated polyvinylchloride (pvc) or acrylonitrile / butadiene / styrene (abs) without plasticizer - Flat sockets - Part 2: Inch based series

TS EN 1934 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat meter

TS EN 1946-5 Thermal performance of building materials and elements - Specific criteria for the assessment of laboratories where heat transfer properties are measured - Part 5: Pipe test methods and measurements

TS EN 1946-1 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 1: General criteria

TS EN 1946-2 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 2: Measurements by enclosed hot table method

TS EN 1998-1 / AC Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings (eurocode 8)

TS EN 1997-1 Eurocode 7: Geotechnical design - Part 2: General rules

TS EN 1998-1 Eurocode 8: Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings

tst ENV 1998-5 Eurocode 8: Design measures for earthquake resistant structures - Part 5: Foundations, retaining walls and geotechnical considerations

TS EN 1998-6 Design of earthquake resistant structures - Part 6: Towers, poles and chimneys

TS EN 1998-3 Eurocode 8: Design of earthquake resistant structures section 3: Evaluation and strengthening of buildings

tst EN 1998-6 Design of earthquake resistant structures - Part 6: Towers, poles and chimneys

TS EN 1998-5 Earthquake resistant construction design - Part 5: Foundations, ground bearing structures and geotechnical aspects (eurocode 8)

TS EN 1998-4 Eurocode 8: Design of earthquake-resistant structures - Part 4: Silos, tanks and pipelines

TS 3541 Rules for the application of thermal insulation material from mineral fibers to heating and ventilation installations

TS 3649 Perlite thermal insulation concrete-Construction-Application rules and test methods

TSE ISO / TR 3956 Structural fire engineering design principles - Based on the relationship between actual fire exposure and standard fire resistance test heating conditions

TS 6874 EN ISO 9251 Thermal insulation - Heat transfer conditions and material properties - Terms and definitions

TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity -Calculation method

TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity - Calculation method

TS EN ISO 7235 Acoustics - Laboratory measurement procedures for silencers and air termination units mounted in the ventilation duct - Loss of plug, flow noise and total pressure loss

TS EN ISO 18233 Acoustics - Application of new measurement methods in building and room acoustics

TS ISO 8301 Thermal insulation - Determination of thermal resistance and related properties in steady state - Methods for determination of heat flow

TS ISO 8302 Thermal insulation - Determination of thermal resistance and related properties in steady state - Enclosed hot plate device

TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and recipes

TSE K 128 One component, flexible, acrylic based waterproofing material

10140-4: 2010 Acoustics - Laboratory measurement of sound insulation in building elements - Part 4: Measurement procedures and rules

TS EN ISO 10140-5: 2010 Acoustics - Laboratory measurement of sound insulation in building elements - Part 1: Rules for test sites and equipment

TS EN ISO 10456 Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of design and thermal values

TS EN ISO 10534-2 Determination of sound absorption coefficient and impedance in acoustic-impedance pipes-Part 2: Transfer function method

10848-4: 2010 Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory - Part 4: At least one heavy element bonding application

TS 11758-1 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 1: Specifications

TS 11758-1 / T1 Polymer bitumen covers-For waterproofing-Used in combination with fusion welding-Part 1: Features

TS 11758-2 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 2: Application requirements

TS EN 12114 Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test methods

TS EN ISO 12241 Thermal insulation for building equipment and industrial installations - Calculation rules

tst 12349 Corrugated sheets and special parts - Organic fiber - Bituminous - Used in waterproofing under tiles

TS EN 12354-6 Building acoustics -Calculation of acoustic performance of structures from the performance of elements - Part 6: Sound absorption in confined spaces

TS EN 12354-3 Building acoustics - Calculation of the acoustic performance of buildings from the performance of the elements - Part 3: Insulation of outside airborne sound

TS EN 12354-5 Building acoustics - Calculation of acoustic performance of structures from the performance of elements - Part 5: Sound levels from service equipment

TS EN 12354-5 / AC: 2010 Building acoustics - Calculation of the acoustic performance of structures from the performance of elements - Part 5: Sound levels from service equipment

TS EN 12524 Building materials and products - Hydroisilicate properties - Scheduled design values

TS EN ISO 12567-2 Thermal performance of windows and doors - Determination of thermal conductivity by hot box method - Part 2: Roof windows and other protruding windows "

Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 12567: Complete windows and doors

TS EN ISO 12569 Thermal insulation of buildings- Determination of air change in buildings- Tracer gas method

TS EN 12667 Thermal performance of building materials and products-Determination of thermal resistance by enclosed hot plate and heat flow meter methods-High and medium heat resistant products

TS EN 12898 Glass - Used in buildings - Determination of spreading coefficient

TS EN 13363-2 Solar protection in combination with window glass - calculation of total solar permeability - Part 2: detailed calculation method "

TS EN 13363-1 + A1 Sun protection devices with single reflector - Calculation of passing sunlight and other light - Part 1: Simplified method

TS EN 13363-1 + A1 / AC Sun protection devices integrated in glass - Calculation of sun and light transmission - Part 1: Simplified method

TS EN 13363-2 / AC Solar protection in combination with window glass - Calculation of total solar permeability - Part 2: Detailed calculation method

TS EN ISO 13370 Thermal performance -Floor heat exchange calculation method

TS EN ISO 13786 Thermal performance of building components - Dynamic thermal properties - Calculation methods

TS EN 14496 Gypsum based binders - Composite sheets and gypsum sheets for heat / sound insulation - Definitions, requirements and test methods

TS EN ISO 14683 Building construction-Thermal bridges-Linear thermal permeability-Simplified method and error-free values

TS EN 14759 Louvers - Acoustic insulation according to airborne sound - demonstrating performance "

TS EN 15026 Hygothermal performance of building components and building elements - Evaluation of moisture transfer by numerical simulation

TS EN 15129 Anti - Seismic devices

TS EN 15217 Energy performance - for buildings - Methods for expressing energy performance and energy certification for buildings

TS EN 15255 Energy performance - For buildings - Precision room cooling load calculation - General criteria and validation procedures

TS EN 15603 Energy performance of buildings - General energy use and description of energy values

TS EN 15657-1 Acoustic properties of buildings and building components - Laboratory measurements of airborne and structural noise of building equipment - Part 1: Simplified situations where swirl baths are sampled and equipment mobility is higher than receiver mobility

TS EN 15900 Energy efficiency services - Terms and rules

TS EN ISO 15927-2 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 2: Hourly data for the design of the cooling load

Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Calculation of wind-driven rain index from hourly wind and rain data for vertical surfaces

TS EN ISO 19901-2 Oil and gas industry - Special requirements for marine structures - part 2: Seismic design procedures and criteria (iso / fdis 19901-2: 2004)

TS EN 20140-9 Measurement of sound insulation in acoustic structures and building elements section 9: Laboratory measurements of air-to-room sound insulation in a suspended ceiling filled with a top filling material

TS EN 50468 Rules for resistance to overvoltages and overvoltages caused by lighting for equipment with communication doors

Lightning protection - Severe storm warning systems TS EN 50536: 2011 / AC: 2011

tst IEC 61312-1 Protection against electromagnetic impacts of lightning - part 1: General principles

TSE K 463 Copper busbars - Annealed and tinned flexible braided - Construction and tests

TSE K 308 / T1 Organic or inorganic binder coatings applied indoors

TS 13777 Composite panels - Polyethylene or mineral filled - Both sides covered with aluminum plate