We are interested in testing, auditing and certification services of all of the following standards. We are professional and experienced in all operations.
TS 3831 Symbols used in hot air heating, ventilation, air conditioning, control and installation
TS 5800 General safety rules for gas-fired heating appliances used in homes and similar places
TS 5827 Natural gas pressure regulation rules for indoor installations (inlet pressure max 25 mbar)
TS 1107 Cantilever and clamps (for radiators)
TS 6355 Natural gas meters - Connection heads with one connection
TS 455 Gas meters (with bellows)
TS 579 Valves and fittings (for radiators)
TS 3538 Plastic fittings (for plumbing)
TS 10876 Mechanical volume correctors - for gas meters
TS 10910 Sealing sheets - Rubber - Cork and tire - Cork - Asbestos based - Used in gas fittings and appliances
TS 12096 Water Heaters (instantaneous water heaters) with gas atmospheric burners - Rules for installation and use
TS EN 627 Rules for recording and monitoring data for elevators, escalators and escalators
TS EN 835 Heat cost splitters are used to determine the heat consumption of the radiator -With the principle of evaporation without electrical energy supply
TS prEN 1531 modulating gas valves-including start gas valves
TS IEC 245-5 Cables - Rubber insulated - Part with rated voltage up to 450 / 750 v 5: Elevator cables
TS 1902 EN 588-1 Fiber cement pipes-Section for sewerage and drainage 1: Non-pressure pipes, joint fittings, joint special fittings
TS EN 810 Dehumidifiers - Electric powered compressor - Evaluation tests, marking characteristics and technical data
TS EN 751-3 Sealing materials - 1 th, 2 and 3 are used for screw metallic connections in contact with all gases and hot water - Part 3: Non-sintered ptfe strips
TS EN 751-3 Sealing materials - 1 th, 2 and 3 are used for screw metallic connections in contact with all gases and hot water - Part 3: Non-sintered ptfe strips
TS EN 751-2 Sealing materials - 1 th, 2 th and 3 are used for screw metallic connections in contact with hot gases and hot water - Part 2: Non-hardening gasket compounds
TS EN 751-1 Sealing materials-1 th, 2 th and 3 third family used for screw metallic connections in contact with gases and hot water-Part 1: Air-hardening seal compounds
TS EN 751-1 Sealing materials-1 th, 2 th and 3 third family used for screw metallic connections in contact with gases and hot water-Part 1: Air-hardening seal compounds
TS IEC / EN 60364-2-21 Electrical installation in buildings-Section 2: Definitions-Subsection 21-Guide to general terms
TS EN 1111 Sanitary fittings - Thermostatic mixing valves (pn 10) - General technical specifications
TS EN 1453-1 Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 1 - Pipes and system features
TS EN 1455-1 Plastic pipe systems - Used for the disposal of indoor wastewater (hot and cold) - Acrylonitrile - Butadiene - Styrene (abs) - Part 1: Pipes, fittings and system features
TS EN 303-1 Boilers boilers with forced traction burner - Part 1: Terms and definitions general specifications experiments and marking
TS EN 12056-3 Drainage systems - Indoor - Part 3: Design and calculation of terrace drainage
TS EN 12279 Gas supply systems - Pressure regulating systems on service lines - Functional requirements
TS EN 303-2 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with jet fuel burners
TS EN 12056-4 Drainage systems - Indoor - Part 4: Design and calculation of waste water pumping stations
TS EN 303-3 Boilers- Part 3: Central heating boilers- Gas-fired system consisting of boiler body and forced draft burner
TS EN 656 Boilers - Central heating boilers - Gas burning - Boilers type B with nominal heat load 70 kw-300 kw
TS EN 274-2 Waste fittings for sanitary installations - Part 2: Test methods
TS EN 12220 Ventilation - for buildings - Ducts - Dimensions of circular flanges for general ventilation
TS EN 806-1 Indoor installation - Specification for the transport of drinking and potable water - Part 1: General
TS EN 806-2 Indoor installation - Specification for the transport of drinking and potable water - Part 2: Design
TS EN 806-3 Indoor installation - Features for the transport of potable and domestic water -Part 3: Pipe dimensioning - Simplified method
TS EN 1074-1 Valves - For water supply - Compliance and verification tests with intended requirements - Part 1: General specifications
TS EN 13264 Ventilation of buildings - Floor mounted air passage grids - Structural classification tests
TS EN 13180 Ventilation for buildings - Ducts - dimensions and mechanical properties for flexible ducts
TS 3419 Ventilation and air conditioning plants - Design rules
TS EN 13264 Ventilation of buildings - Floor mounted terminal devices - Structural classification tests
TS HD 308 S2 Introduction of cores in cables and flexible cords
TS EN ISO 3822-3 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 1074-5 Valves for water supply - Compliance and verification tests for favorable design requirements - Part 5: Control valves
TS EN 12098-2 Control elements for heating systems - Part 2: Optimal start and stop control equipment for hot water heating systems
TS EN 12238 Ventilation - Aerodynamic tests of ventilation end elements
TS EN 12239 Valves for buildings - Air connection devices - Aerodynamic test and declaration for displacement flow applications
TS EN 13410 Radiant heaters - Gas burning - Hanging on the ceiling - Ventilation rules for non-residential buildings
TS EN 12171 Heating systems - for buildings - Method for the preparation of documents for operation, maintenance and use - Heating systems without a trained operator
TS EN 62056-42 Electrical measurement-Data conversion for meter reading, scheduling and load control-Part 42: Physical added operation and operations for directional asynchronous data conversion
TS EN 62056-46 Electrical measurement-Data conversion for meter reading, scheduling and load control-Part Data link layer using 46 hdlc protocol
TS EN 13030 Ventilation-Terminals for buildings-Performance tests of simulated rain vents
TS EN 13564-1 Flood protection devices in buildings-Part 1: Requirements
TS EN 13180 Ventilation of buildings-Air ducts-Dimensions and mechanical properties for flexible ducts
TS EN ISO 3822-1 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 1: Measurement method
TS EN 62056-21 Electrical meter - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange
TS EN 12170 Heating systems - for buildings - Method for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator
TS EN 62056-21 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - Part 21: Direct on-site data exchange
TS EN 62056-42 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange
TS EN 12170 Heating systems - for buildings - Processes for the preparation of operational, maintenance and use documents - Heating systems requiring trained personnel
TS EN 1490 Valves - Used in buildings - Combined temperature and pressure reducing valves - Tests and features
TS EN 12236 Ventilation - for buildings - Air duct hanger and supports - Strength properties
TS EN 1567 Valves - for buildings - Water pressure reducing and combined water pressure reducing valves - Features and tests
TS 2212 EN 60335-2-21 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 13183-2 Moisture content of lumber - Part 2: Estimation by electric resistance method
TS EN 81-28 Elevators- Safety rules for construction and assembly-Elevators for human and freight transport section Alarms on 28 human and freight elevators
TS EN 81-70 Lifts - Safety requirements for construction and installation - Special applications for passenger and freight elevators section 70
TS EN 12729 Preventing contamination by recoil of drinking water - Type B-Type A
TS EN 13403 Ventilation in buildings - Non-metal ducts - Ducts made of duct insulation panels "
TS EN 13564-2 Flood protection devices for buildings - Part 2: Test methods
TS EN 81-58 Elevators - Safety rules for construction and installation - Inspection and tests section 58: Fire resistance tests at exit doors
TS EN 1253-5 Strainers - Buildings used - Part 5: Strainers with holder for light liquid from water
TS EN 13078 Devices used to prevent contamination caused by the escape of potable water - Air inlet and flood-fed submersible air space - Family a, type c
TS EN 13079 Contamination prevention devices from backflow of potable water - Air gap with injector - group A, type D
TS EN 13558 Properties of impact-modified extruded acrylic sheets for domestic shower trays
TS EN 13559 Properties of impact-modified co-extruded abs / acrylic sheets for domestic baths and shower trays
TS EN 13904 Low resistance shower heads for sanitary fittings
TS EN 62052-11 Electrical measuring equipment (aa) - General rules, tests and test conditions - Part 11: Meter
TS EN 62053-11 Electrical measuring equipment (aa) - Specific requirements - Part 11: Electromechanical meters for active energy (class 0,5 - class 1 and class 2)
TS EN 62053-21 Electrical measuring equipment (aa) - Special requirements - Part 21: Static meters for active energy (class 1 and class 2)
TS EN 62053-22 Electrical measuring equipment (aa) - Special requirements - Part 22: Static meters - For active energy (class 0,2 s and class 0,5 s)
TS EN 62053-23 Electrical measuring equipment (aa) - Special rules section 23: Static meters - For reactive energy (class 2 and class 3)
TS EN 81-28 Elevators - Safety regulations for construction and installation - Passenger and freight elevators - Part 28: Remote alarm for passenger and freight elevators
TS EN 81-58 Lifts - Safety requirements for construction and installation - Inspection and tests - Part 58: Fire resistance test for floor doors
TS EN 246 Sanitary fittings - General specifications for flow regulators
TS EN 60335-2-51 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 60335-2-84 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-84: Particular requirements for toilets
TS EN 60335-2-88 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems
TS EN 60335-2-73 Safety regulations - For domestic and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
TS 10762-1 EN ISO 15875-1 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 1: General
TS 10762-5 EN ISO 15875-5 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 5: suitability of the system
TS EN 81-80 Elevators - Safety rules for construction and installation-Existing elevators- Part: 80 rules for improving the safety of existing passenger and freight elevators
TS EN 13465 "Ventilation in buildings - Calculation methods for determination of air flow in residential buildings"
TS EN 14124 Inlet valves - For float reservoirs
TS EN ISO 16032 Acoustics - Measurement of Sound Pressure Level in Service Equipment in Buildings - Engineering Method
tst EN 13779 (Priority 1) Ventilation - Non-residential - Performance characteristics for ventilation and room air conditioning systems
TS EN 80 Suspended urinals - Connection dimensions
TS EN 81-70 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 70: Accessibility for passenger elevators including disabled persons
TS EN 215 Radiator valves - Thermostatic - Specifications and test methods
TS EN 303-3 / A2 Boilers - Part 3: Central heating boilers - Gas burning - System consisting of boiler body and forced draft burner
TS EN 13558 Impact-modified extruded acrylic sheets used in domestic shower trays - Specification
TS EN 13559 Impact modified coextruded abs / acrylic sheets for bath tubs and shower trays for domestic use - Specifications
TS EN 81-80 Elevators - Safety rules for construction and installation-Existing elevators-Section 80: Rules for improving the safety of existing passenger and freight elevators
TS EN 81-70 / A1 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators Section 70: Accessibility of people including lifts
TS 2212 EN 60335-2-21 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
tst 200559161 Hygienic air conditioning and ventilation in hospitals - Preparing projects, receiving (acceptance) and periodic maintenance of the system
TS EN 62052-21 Electrical measuring equipment (aa) - General rules, tests and test requirements - Part 21: Tariff and load control equipment
TS EN 60335-2-105 Safety regulations - Part for household and similar electrical appliances 2-105: Particular requirements for multifunctional shower enclosures
TS EN 60335-2-21 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 60335-2-88 Safety rules - For electrical appliances used in households and similar places - Section 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems
TS EN 60379 Household electric water heaters - Performance measurement methods
TS EN 1717 General features of water pollution prevention devices and prevention of water pollution caused by backflow in drinking water installations
TS EN 12237 Ventilation in buildings-Duct network-Circular cross-section sheet metal air ducts-Strength and tightness
TS EN 695 Kitchen Sinks - Connection sizes
TS EN 62054-11 Electric meter (aa) - Tariff and load control - part 11: Particular requirements for electronic wavelet controlled receivers
TS EN 62054-21 Electric meter (aa) - Tariff and load control - part 21: Particular requirements for time switches
TS EN 62052-21 Electrical measuring equipment (aa) - General rules, tests and test requirements - Part 21: Tariff and load control equipment
TS EN 12261 / AC Gas meters-Turbine meters
TS EN 14394 + A1 Boilers - Boilers with forced draft burners - Rated heat output does not exceed 10 MW and has a maximum operating temperature of 110 ºC
TS EN 62053-52 Electrical measuring equipment (aa) - Particular requirements Section 52: Symbols
TS EN 13836 Boilers - Central heating boilers - Gas burning - Boilers type B with nominal heat input 300 kw - 1000 kw
TS EN 60335-2-73 / A1 Safety regulations - Part for household electrical appliances 2-73: Particular requirements for fixed immersion heaters
TS EN 60335-2-90 Safety regulations - Part for household electrical appliances 2-90: Particular requirements for commercial microwave ovens
TS EN 656 / A1 Boilers - Central heating boilers - Gas burning - Boilers type B with rated heat load 70 kw-300 kw
TS EN 62054-11 Electric meter (aa) - Tariff and load control - Part 11: Particular requirements for electronic wavelet controlled receivers
TS EN 62054-21 Electric meter (aa) - Tariff and load control - Part 21: Particular requirements for time switches
TS EN 81-70 / A1 Lifts - Safety requirements for construction and installation - Specific applications for passenger and freight elevators - Part 70: Accessibility for passenger elevators including disabled persons
TS EN 303-3 / AC Boilers - Part 3: Central heating boilers - Gas fired - Consisting of boiler body and forced draft burner
TS EN 656 / A1 Boilers - Central heating boilers - Gas burning - Boilers type B with nominal heat load 70 kw - 300 kw
TS EN 12097 Ventilation for buildings - Ducts - Duct construction rules
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 50470-1 Electrical measuring equipment (aa) - Part 1: General rules, tests and test conditions - Measuring equipment (class a, b and c)
TS HD 60364-4-41 Electrical installation in buildings section 4- Safety protection group 41- Protection against electric shock
TS EN 303-7 Boilers - Part 7: Gas-fired central heating boilers with forced draft burners with rated heat output not exceeding 1000 kW
TS EN 303-7 Boilers - Part 7: Gas-fired central heating boilers with forced draft burners with rated heat output not exceeding 1000 kW
TS EN 15240 Ventilation for buildings - Energy performance in buildings - Guidelines for the inspection of air conditioning systems
TS EN 15242 Ventilation for buildings - Calculation methods for determination of air flow in buildings (including uncontrolled leaks to buildings)
TS EN 62056-46 / A1 Electrical measurement - Data exchange for load control, tariff and measurement reading - Part 46: Data link layer using the HDLC protocol
TS EN ISO 15874-1 / tst A1 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 1: General
TS EN 60335-2-73 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
TS EN 13831 Closed expansion vessels with diaphragm for water installations
TS EN 15316-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Section 1: General
TS EN 15316-2-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 2: Space heating emission systems
TS EN 15316-4-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3: Heat generation systems, thermal solar systems
TS EN 15316-4-4 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 4: Heat generation systems, cogeneration systems integrated with buildings
TS EN 15316-4-5 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 5: Performance and quality of district heating production systems, district heating and large volume systems
TS EN 15316-4-6 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 6: Heat generation systems, photoltaic systems
TS EN 60335-2-106 Safety regulations - For electrical appliances used in households and similar places - Part 2-106: Particular requirements for heating units and heated carpets for room heating installed under removable floor covers
TS EN 13443-2 + A1 Water conditioning equipment used in the building-Mechanical filters-Part 2: Particulate value 1fm up to 80 µm Performance safety and test rules
TS EN 14652 + A1 Water treatment equipment for buildings - Membrane separation devices - Performance, safety and test rules
TS EN 14743 + A1 Water treatment equipment used in the building - Softeners - Performance, safety and test requirements
TS EN 14812 + A1 Indoor water treatment device-Chemical dosing system-Preset dosing systems-Features for performance, safety and testing
TS EN 14897 + A1 Indoor water conditioning equipment - Low pressure ultraviolet radiators - Mercury devices performance safety and test rules
TS EN 13443-1 + A1 Water conditioning equipment in buildings - Mechanical filters - Part 1: Particle value 80 µm to 150 µm Specification for performance, safety and testing
TS EN 15316-3-1 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-1: Domestic hot water systems-Determining requirements
TS EN 15316-3-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Section 3-2: Domestic hot water systems-Distribution system
TS EN 15316-3-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-3: Domestic hot water systems-Production
TS EN 15450 Heating systems in buildings-Design of heat pump heating systems
TS EN 60335-2-105 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-105: Particular requirements for multifunctional shower enclosures
TS EN 60335-2-106 Safety regulations - For household and similar electrical appliances - Part 2-106: Particular requirements for heating units installed under heated carpets and removable floor coverings for heating the room
TS EN 115-1 + A1 Safety for escalators and escalators - Part 1: Construction and installation
TS EN 15069 Gas connection safety valves - for metal hoses - for indoor use - for connection of gas appliances
TS EN 13015 + A1 Maintenance of lifts and escalators - Rules for maintenance instructions
TS EN 200 Sanitary fittings - Single taps and combination taps (pn 10) - General technical specifications
TS EN 60335-2-51 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 60335-2-84 / A1 Safety regulations - For household electrical appliances - Part 2-84: Particular requirements for toilets
TS EN 81-3 + A1 Lifts - Safety regulations for construction and installation section 3: Electrical and hydraulic service lifts
TS EN 198 Sanitary installations - Bath tubs made of cast acrylic sheets by interconnection - Features and test methods
TS EN 15069 Gas safety valves - For metal hose assemblies - For indoor use - For connection of gas appliances
TS EN 15241 Ventilation - Calculation method for energy loss due to ventilation and filtration in commercial buildings for buildings
TS EN 15316-2-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Section 2-3: Distribution systems for space heating
TS EN 15316-4-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 4-1: Heat generation systems for space heating, fuel combustion systems (boilers)
TS EN 15316-4-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 4-2: Heat generation systems for space heating, heat pumps
TS EN ISO 21003-5 Multilayer pipe systems for indoor hot and cold water installations - Part 5: Compliance with the purpose of the system
TS EN 60335-2-84 / A1 Safety regulations - For household electrical appliances - Part 2-84: Particular requirements for toilets
TS EN 60335-2-105 / A1 Safety regulations - Part for household electrical appliances 2-105: Particular requirements for multifunctional shower enclosures
TS HD 60364-1 Electrical installation in buildings section 1: Scope, subject and basic principles
TS EN 263 Sanitary ware - Cross-linked cast acrylic sheets for bath tubs and shower trays for domestic use
TS HD 60364-1 Low voltage electrical installations - Part 1: Main principles, evaluation of general characteristics and descriptions
TS EN 13831 Closed expansion vessels with diaphragm for water installations
Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3822: Measurement method TS EN ISO 1-1 / A1
TS EN 81-3 + A1 / AC Lifts - Safety regulations for construction and installation - Part 3: Electrical and hydraulic service lifts
TS 2212 EN 60335-2-21 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS 12850 Authorized services - Ventilation and air conditioning systems - Air handling units, air conditioners, chillers, fan coils, fans (fans, ventilators), air purifiers and air curtains. - Rules
TS EN ISO 3822-3 / A1 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 437 + A1 Test gases - Test pressures - Device categories
TS EN 437 + A1 Test gases - Test pressures - Device categories
TS EN 60335-2-65 / A1 Safety regulations - For household electrical appliances and similar - Part 2-65: Particular requirements for air purification devices
TS EN 777-3 Heating systems - Radiant tube - Gas burner - Multi burner - Ceiling mounted for outdoor use - Part 3: System f- Safety
TS EN 777-2 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 2: System e-Safety
TS EN 777-1 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 1: System d - Safety
TS HD 60364-7-721 Electrical installation in buildings - Part 7-721: Special facilities or areas - Specification for marinas and similar areas
TS HD 60364-7-709 Electrical installation in buildings - Part 7-709: Special facilities or areas - Specification for marinas and similar areas
TS HD 60364-7-709 Electrical installation in buildings - Part 7-709: Special facilities or areas - Specification for marinas and similar areas
TS HD 60364-7-708 Electrical installation in buildings - Part 7-708: Special facilities or areas - Caravan parks - Features for campsites and similar areas
Acoustics - Laboratory tests of noise emitted from devices and instruments used in water supply plants - Part 3822: Measurement method - Amendment 1: Measurement uncertainty TS EN ISO 1-1 / A1
TS EN 60335-2-73 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
TSE CEN / TR 115-3 Safety on escalators and moving escalators - Part 3: EN 115: 1995 and its amendments to EN 115-1: 2008
TS EN 60335-2-21 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 81-3 + A1 / AC Lifts - Safety requirements for construction and installation - Part 3: Electrical and hydraulic service lifts
TS EN 777-4 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 4: System h - Safety
TS EN 416-1 Heaters - Gas burner - Radiant tube - For outdoor use - Single burner - Ceiling mounted - Part 1: Safety
tst 3419 Ventilation and air conditioning plants - Design rules
tst 3420 Rules for placing ventilation and air-conditioning systems
TS EN ISO 3822-3 / A1 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
Safety regulations for household and similar electrical appliances
TS EN 60335-2-73 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
TS EN ISO 1452-1 Plastic pipe systems - for drinking and potable water - Used in underground and surface pressure sewage systems - Polyvinyl chloride (PVC-U) without plasticizer - Part 1: General
TS EN 806-4 Indoor installation - Specification for the transport of drinking and potable water - Part 4: Installation
TS EN 115-1 + A1 Safety for escalators and escalators - Part 1: Construction and installation
TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN 81-31 Elevators - For the transport of persons and goods - Safety regulations concerning construction and installation - Part 31: Open hoists only
TS EN 249 Sanitary installations - Shower trays made of cross-linked cast acrylic plates - Specification and test methods
TS EN 806-4 Indoor installation - Requirements for the transport of potable and domestic water - Part 4: Installation
TS EN ISO 1452-5 Plastic pipe systems - Used for drinking and potable water, underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 5: suitability of the system
TS EN 62058-11 Electrical meters (aa) - Acceptance inspection - Part 11: General acceptance inspection methods
tst EN 62058-21 Electrical measuring instrument (aa) - Acceptance inspection - Part 21: Particular requirements for active energy for electromechanical meters
TS EN 62058-31 Electrical meters (aa) - Acceptance inspection - section 31: Static meters - For active energy - Special rules (class 0,2 s, 0,5 s, 1 s and 2 and class indices a, b, c)
TS EN 817 Sanitary fittings - Mechanical mixers (PN 10) - general specifications
TS EN 12405-1 + A2 Gas meters - Conversion devices - Part 1: Volume converter
tst HD 60364-6 Low voltage electrical installations - Part 6: Verification
TS EN 62058-21: 2010 Electrical meters (ac) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (class 0,5,1 and 2 and class a and b indexes)
TS EN 62058-31 Electrical meters (aa) - Acceptance inspection - Part 11: Particular requirements for static meters for active energy (class 0,2 s, 0,5 s, 1 and 2 and class indexes a, b and c)
TS EN 13141-2 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 2: Exhaust and air supply terminal assembly
TS EN 13941 + A1 Central heating - Design, installation of pre-insulated bonded pipe systems
TS IEC 245-5 / T1 (Number modification, TS IEC 60245-5) Cables-Rubber insulated-Part with rated voltage up to 450 / 750 v 5: Lift cables
TS EN 13203-3 Solar-powered gas-burning devices-Indoor-Hot water-generating devices 500 liter water storage capacity and heat input 70kw-proof devices section 3: Inspection of energy consumption
TS EN 777-2 Heating systems - Radiant tube - Gas burning - Multi-burner - Ceiling mounted - For outdoor use - Part 2: System e - Safety
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN 1555-2 Plastic piping systems - Used for the transport of gas fuels - Polyethylene (pe) - Part 2: Pipes
TS EN 1555-5 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene - Part 5: suitability of the system for its purpose
TS EN 15239 Ventilation for buildings - Energy performance in buildings - Guidelines for the inspection of ventilation systems
TS EN 15251 Indoor parameters for design and evaluation of energy performance of buildings - Indoor air quality, thermal environment, lighting and acoustics
TS EN 15316-2-1 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 2-1: Heat dissipation systems for space heating
TS EN 15316-3-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-2: Residential hot water systems-Distribution
TS EN 15316-3-3 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 3-3: Residential hot water systems - Production
TS EN 15316-2-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 2-3: Distribution systems for space heating
TS EN 15316-4-1 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 1: Heat generation systems for space heating - Combustion systems (boilers)
TS EN 15316-4-2 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 2: Heat generation systems for space heating - Heat pump systems
TS EN 15316-4-3 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-3: Heat generation systems - Thermal solar energy systems
TS EN 15316-4-4 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 4: Heat generation systems - Cogeneration systems integrated with the building
TS EN 15316-4-5 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 5: Production systems for space heating - Performance and quality of district heating and large volume systems
TS EN 15316-4-6 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 4 - 6: Heat generation systems - Photovoltaic systems
TS EN 15316-4-7 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 7: Production systems for space heating - Biomass combustion systems
TS EN 1264-3 Surface-based water-based heating and cooling systems - Part 3: Sizing
TS EN 1264-4 Surface-based water-based heating and cooling systems - Part 4: Installation
TS EN 15378 Heating systems in buildings - Inspection of boilers and heating systems
TS EN 777-4 Heating systems - Radiant tube - Gas burning - Multi-burner - Ceiling mounted - For outdoor use - Part 4: System h - Safety
TS EN 777-3 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 3: System f - Safety
TS EN 777-1 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 1: System d - Safety
tst HD 60364-7-712 Electrical installation in buildings - Part 7-712: Rules for special installations and locations - Solar photovaltaic (pv) power supply systems
TS EN 15316-4-8 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-8: Production systems for space heating, air heating and ceiling suspended radiant heating systems
TS EN 12809 / T1 Boilers for residential heating systems for houses - Single, solid fuel, rated heat output up to 50 kw - Features and test methods
TS EN 13141-7 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 7: Performance tests of mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems designed for individual dwellings "
TS HD 60364-5-52 Electrical installation in buildings - Part 5-52: Selection and installation of electrical equipment-Drawn line systems (conductors)
TS EN 1264-3 Surface-based water-based heating and cooling systems - Part 3: Sizing
TS EN 1264-4 Surface-based water-based heating and cooling systems - Part 4: Installation
TS EN 15378 Heating systems in buildings - Inspection of boilers and heating systems
TS EN 777-4 Heating systems - Radiant tube - Gas burning - Multi-burner - Ceiling mounted - For outdoor use - Part 4: System h - Safety
TS EN 777-3 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 3: System f - Safety
TS EN 777-1 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 1: System d - Safety
tst HD 60364-7-712 Electrical installation in buildings - Part 7-712: Rules for special installations and locations - Solar photovaltaic (pv) power supply systems
TS EN 15316-4-8 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-8: Production systems for space heating, air heating and ceiling suspended radiant heating systems
TS EN 12809 / T1 Boilers for residential heating systems for houses - Single, solid fuel, rated heat output up to 50 kw - Features and test methods
TS EN 13141-7 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 7: Performance tests of mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems designed for individual dwellings "
TS HD 60364-5-52 Electrical installation in buildings - Part 5-52: Selection and installation of electrical equipment-Drawn line systems (conductors)
TS EN ISO 15877-2: 2009 / A1 Plastic piping systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 2: Pipes
TS EN ISO 15877-5 / A1 Plastic pipe systems - For hot and cold water systems - Chlorinated poly (vinyl chloride) (pvc-C) - Part 5: Suitability of the system for its purpose
TS IEC 60050-826 International Electrotechnical Glossary - Part 826: Electrical Installations
TS EN 60335-2-21 / AC Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-21: Particular requirements for storage water heaters
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for storage water heaters TS EN 21-2003-2010: 2 / AC: 21
TS EN ISO 1452-3 Plastic pipe systems - For drinking and potable water - Used in underground and surface pressure sewage systems - Made of polyvinyl chloride (pvc-U) with no plasticizer added - Part 3- Fittings
TS EN 1264-1 Floor heating and cooling systems - Water-based - part 1: Definitions and symbols
TS EN 15316-4-8 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 4-8: Space heat generation systems, technical combustion systems
TS HD 60364-5-54 Building electrical installations - Part 5: Selection and installation of electrical equipment - Part 54: Grounding arrangements and image protection conductors
TS EN ISO 21003-2: 2008 / A1 Multilayer pipe systems for indoor hot and cold water installations - Part 2: Pipes
TS 7363 Natural gas - Building indoor installation design and application rules
TS 10672-2 EN ISO 15875-2 / tst A1 -Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 2: Pipes
TS 10672-1 EN ISO 15875-1 / tst A1 -Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 1: General
TS EN 115-2 Safety for escalators and escalators - Part 2: Rules for improving the safety of existing escalators and escalators
tst 496 The principles of natural ventilation of windows and bathrooms with chimneys
TSE CEN / TS 81-76 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 76: Evacuation of disabled passengers using elevators
TS EN 33 Closets and reservoirs - Connection sizes
TS EN 12201-1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 1: General
TS EN 12201-3 + A1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 3: Fittings
TS EN 12201-5 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 5: suitability of the system for its purpose
TS EN 15221-3 Plant management - Part 3: Quality guide to plant management
TS EN 15221-4 Facility management - Part 4: Taxonomy, classification and structures in facility management
TS EN 15221-5 Facility management - Part 5: Guidance on facility management processes
TS EN 15221-6 Plant management - Part 6: Area and gap measurement in plant management
TS EN 806-5 Indoor installation - Specification for the transport of drinking and potable water - Part 5: Operation and maintenance
TS EN 15316-3-1 Heating systems for buildings - Method of calculating system efficiency and energy requirements of the system - Part 3-1: Residential hot water systems - Determination of requirements (hot water consumption conditions)
TS EN 15726 Ventilation for buildings - Air breathing - Measurements in the area covered by air-conditioned / ventilated rooms for the evaluation of thermal and acoustic conditions
Safety regulations - For household and similar electrical appliances - Part 7936-60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers
TS EN 806-5 Indoor installation - Features for the transport of drinking and potable water -Part 5: Operation and maintenance
TSE CEN / TS 1451-2 Plastic pipe systems -Polypropylene (pp) used for disposal of cold and hot waste water in the building -Chapter 2: Conformity assessment guide
TSE CEN / TS 1519-2 Plastic pipe systems -Used for disposal of indoor waste water -Pietylene (pe) -Chapter 2: Conformity assessment guide
TSE CEN / TR 12108 Plastic pipe systems - Pressure pipe systems for hot and cold - Rules for laying drinking and utility water pipes in the building
TS EN 60335-2-51: 2003 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water systems
TS EN 62056-46 / A1 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - Part 46: Data link layer using Hdlc protocol
TS HD 60364-7-709: 2009 / A1 Low voltage electrical installations - Part 7 - 709: Specification for special installations or locations - For marinas and similar
TS EN 15882-1 Comprehensive application of results from fire resistance tests in service facilities - Part 1: Channels
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS HD 60364-5-559 Electrical installation in buildings - Part 5-559: Selection and installation of electrical equipment - Luminaires and lighting installations
TS EN 1112 Sanitary fittings - Shower heads for Type 1 and Type 2 water supply systems - General specifications
TS HD 60364-7-710 Low voltage electrical installations -Chapter 7-710: Rules for special facilities and places- Medical spaces
TS EN 303-5 Boilers - Part 5: Solid fuel boilers, manual and automatic loading, rated heat output up to 500 kW - Terms and definitions, requirements, tests and marking
TS EN 1112 Sanitary fittings - Hand showers - Used in coils - Rated pressure pn10
TS EN 1555-5 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene (PE) - Part 5: suitability of the system for its purpose
TS EN 33 One-piece toilet bowls - Connection dimensions
TS EN 50379-3 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances Part 3: Performance requirements for devices used in the illegal service of gas-fired heating appliances
TS EN 81-41 Elevators - Safety regulations for construction and installation - Special elevators for the transport of persons and goods - Part 41: Vertical lifting platforms for the use of people with mobility impairments
TS EN 62059-32-1 Electrical measuring equipment - Dependency - Section 32-1: Durability - Stability test of metrological characteristics by applying elevated temperature
TS HD 60364-5-56: 2010 / A1: 2011 (EN) Electrical installation in buildings - Part 5: Selection and installation of electrical equipment group 56: Security services
TSE K 179 Lift rail clamping system
TSE K 169 Plastic pipe systems - Used for the disposal of cold and hot wastewater in the building - Made of mineral doped polypropylene (pp) material - Soundproof pipes, fittings and system features
TS EN 50379-2 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances part 2: Performance requirements for legal examinations and assessment devices
TS HD 60364-4-444: 2010 / AC: 2012 (EN) Low voltage electrical installations - Part 4 - 44: Protection for safety -: protection against voltage and electromagnetic disturbances
TS EN 12201-4 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
TS EN 1555-4 Plastic piping systems - For the transport of gas fuels - Polyethylene (PE) - Part 4: Valves
TS HD 60364-7-710 Low-voltage electrical installations - Part 7-710: Requirements for special installations or spaces - Medical premises
tst 2749 Stoves (of ceramics)
TS EN 12828 + A1 Heating systems - Buildings - Design of water-operated heating systems
TS EN 50379-1: 2012 (EN) Specification for portable electrical apparatus designed to measure flue gas combustion parameters of heating devices - Part 1: General requirements and test methods
tst 200454344 Prepaid water meter
TS EN 12599 Ventilation in buildings - Test procedures and measurement methods on ventilation and air conditioning systems
TS EN 232 Tubs - Connection dimensions
TS EN 251 Shower trays - Connection dimensions
TS EN 15221-7: 2012 (EN) Facility management-Part 7: Guide for performance comparison
TS EN 12405-2 Gas meters - Conversion devices - Part 2: Energy converter
TS EN 15700 Safety of conveyor belts for winter sports and free use
TS EN ISO 25745-1 Energy performance for elevators, escalators and moving conveyors - Part 1: Energy measurement and validation
TS ISO 13781: 2012 (EN) Flexible hose fittings in drinking water installations - Functional features and test methods
TS EN 81-21 + A1 Elevators - For the transport of persons and cargo - Safety rules for construction and installation - Part 21: New elevators for the transport of people and goods / people in existing buildings
TS EN 60335-2-67 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-67: Particular requirements for commercially used soil tillage and floor cleaning machines
TS ISO 4190-1 Elevators - Placement-related dimensions - Part 1: Class I, Class II, Class III and Class VI elevators
TS EN 303-5 Boilers-Section 5: Solid fuel boilers with manual and automatic loading, rated heat power up to 500 kw-Terms and recipes, specifications, tests and marking
TS 13592 Authorized services - Rules for hydraulic systems for power transmission
TS EN 12159 Construction cranes - For transporting personnel and materials - Vertical guide rail, with cab
TS EN 12327 Gas supply systems - Pressure test, commissioning and decommissioning - Functional requirements
1264-2: 2008 + A1: 2012 Floor-mounted hot-water heating systems part 2: Floor heating: Evidence methods for determination of thermal power using calculation and test
TS EN 12405-2 Gas meters - Conversion devices - Part 2: Energy converter
TS EN 16145: 2012 Sanitary fittings - Removable headers for kitchen sinks and basin mixers - General specifications
TS EN 16445 Ventilation for buildings - Air diffusion - Aerodynamic testing and evaluation for mixed flow application: non-isothermal process for cold jet
TS EN 13142 Ventilation in buildings - Components / products for residential ventilation - Mandatory and optional performance characteristics "
TS EN ISO 29462 Field tests of general ventilation filtration devices and systems on site with removal efficiency and resistance to air flow of particle size
TS EN ISO 10121-2 Test methods for the examination of gas phase air purifying media performance and apparatus for general ventilation - Part 2: Gas phase air purifiers (GPACD)
TSE CEN / TS 12666-2 Plastic pipe systems - For unpressurized groundwater and drainage - From polyethylene (pe) - Part 2: Conformity assessment guide
TSE CEN / TS 1555-7 Plastic pipe systems - For the transport of gas fuels - Made of polyethylene (pe) - Part 7: Conformity assessment guide
TS EN ISO 15874-1 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 1: General
TS EN ISO 15874-2 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 2: Pipes
TS EN ISO 15874-3 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 3: Fittings
TS EN ISO 15874-5 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 5: System suitability
TSE K 196 Duct shelter ventilation device
TS 13630 Lifts - F90 Class fire resistant sliding doors
TS EN ISO 13260 Thermoplastic pipe systems for unpressurized underground drainage and waste water - Simultaneous temperature cycling and external load resistance test method
TSE CEN / TS 1566-2 Plastic pipe systems - Used for the disposal of cold and hot waste water in the building - Chlorinated polyvinyl chloride (pvc-C) - Part 2: Conformity assessment guide
TSE CEN / TS 14632 Plastic pipe systems - Used in pressure and non-pressurized drainage and sewage systems - Unsaturated polyester resin (up) based glass reinforced thermoset plastics (grp) conformity assessment guide
TSE CEN / TS 14632 Plastic pipe systems - Used in pressure and non-pressurized drainage and sewage systems - Unsaturated polyester resin (up) based glass reinforced thermoset plastics (grp) conformity assessment guide
TS EN 15012 Plastic pipe systems - Soil and waste discharge systems in the building - Performance characteristics for pipes, fittings and fittings
TS EN 13203-3 Solar powered gas-fired indoor appliances producing hot water - Devices that do not exceed 500 liter water storage capacity and 70 kW heat input
TSE CEN / TR 1749 European program for the classification of gas appliances by the discharge method of combustion products (types)
tst EN 12238 Ventilation - Aerating end elements aerodynamic tests
tst 2164 Heating installation design rules
tst EN 50193-1 Electric instantaneous water heaters - Part 1: General rules
TS EN 416-1 Heaters - Gas burning - Radiant tube - For outdoor use - Single burner - Ceiling mounted - Part 1: Safety
TS EN 16313 Connections for heating and cooling applications-G ¾ A with external threaded pipe and taper-changeable connections
TS EN ISO 11297-1 Plastic piping systems - For the renovation of underground drainage and sewerage networks under pressure - Part 1: General
TS EN 12102 Air conditioners - Heat pumps and dehumidifiers air-driven noise-driven compressor driven by electrical energy - Determination of sound power level
TS EN 16314 Gas meters - Additional features
TS EN 15218 Liquid cooling packs and air conditioners with evaporative cooled condensers, electrical driven compressors for space cooling - Terms, recipes, test conditions, test methods and rules
TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods
TS EN 33: 2011 / AC One-piece toilet bowls - Connection dimensions
TS EN 33: 2011 / AC One-piece toilet bowls - Connection dimensions
TS EN ISO 11297-3 Plastic pipe systems - For the renovation of underground drainage and sewerage networks under pressure - Part 3: Laying with crimped pipes
TS EN 303-2 / A1 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with spray fuel burners
TS EN 14825 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Assessment and test of seasonal performance under partial load conditions
TS EN 60745-2-21 / A1 Hand-held power tools - Safety - Part 2-21: Particular requirements for duct cleaners
TS EN 12098-1 Control unit for heating systems - Part 1: Control equipment for hot water heating systems
TS HD 60364-7-718 Electrical installation in buildings - Part 7-718: Requirements and uses for installations intended for public or business use
TS EN 62056-8-3 Electrical Measurement data exchange - DLMS / COSEM suite - Part 8-3: Communication profile for PLC S-FSK neighborhood networks
TSE CEN / TS 14807 Plastic piping systems - Glass fiber reinforced thermoset plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for structural analysis of buried GRP-UP pipelines
TSE CEN / TS 14807 Plastic piping systems - Glass fiber reinforced thermoset plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for structural analysis of buried GRP-UP pipelines
TS EN 81-82 Safety rules for construction and installation - Existing elevators - Part 82 - Improving accessibility to existing elevators including disabled
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions
TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 4: Operating characteristics, marking and operating instructions
TS EN 834 Heat cost splitters-Radiators used to determine heat consumption-Powered by electrical energy
TS EN 12098-1 Control devices for heating systems - Part 1: External temperature controller for hot water heating systems
TS EN 14825 Electrically driven compressor air conditioners, liquid cooling packs and heat pumps for ambient heating and cooling - Test and partial load classification and calculation of seasonal performance
TS EN 15091 Sanitary fittings - Electronic opening and closing
TS HD 60364-5-51 / A11 Electrical installation in buildings - Part 5-51 - Selection and installation of electrical equipment - Common rules
TS HD 60364-5-56 / A11 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment group 56: Security services
TS 13642 Authorized services - Rules for escalators and conveyor belts
TS HD 60364-5-557 Electrical installation in buildings - Part 5-559: Selection and installation of electrical equipment - Auxiliary circuits
TS EN 62056-9-7 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - DLMS / COSEM layer - Part 9 - 7: Communication profile for TCP-UDP / IP networks
TS EN 1074-4 Valves - For water supply - Compliance and verification tests with intended requirements - Part 4: Air valves
TS EN 13403 Ventilation in buildings - Non-metal ducts - Duct system made of insulated duct panels
TS ISO 16422 Pipes and fittings used for water transmission under pressure - From poly (vinyl chloride) (PVC_O) without oriented plasticizer - Specification
TS EN ISO 15874-3 Plastic pipe systems - For hot and cold water - Polypropylene (PP) - Part 3: Fittings
TS EN ISO 15874-1 Plastic piping systems for hot and cold water - Polypropylene (Pp) - Part 1: General
TS 2170 Underground installation of water and gas pipes
TS 2170 Underground installation of water and gas pipes
TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods
TS EN ISO 15874-5 Plastic pipe systems - For hot and cold water - Polypropylene (PP) - Part 5: System suitability
TS EN ISO 15874-2 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 2: Pipes
TS ISO 4190-1 / Cor 1 Elevators - Dimensions related to installation - Part 1: Class I, Class II, Class III and Class VI elevators (Amended 1: 2011)
TS 799 Alaturka toilet stones
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions
TS EN 50600-2-2 Information technology - data center facilities and infrastructures - Part 2-2: Power distribution
TSE CEN / TS 12201-7 Plastic pipe systems - For drinking and potable water - Polyethylene (pe) - Part 7: Conformity assessment guide
TS ISO 16422 Pipes and fittings for water transmission under pressure - Oriented, non-plasticizing polyvinyl chloride (PVC-O) - Specification
TS EN 12015 Electromagnetic compatibility - Product family standard for elevators, escalators and moving conveyors - Emission
TSE CEN / TS 1452-7 Plastic pipe systems - Part of polyvinyl chloride (pvc-U) with no plasticizer for drinking and potable water 7: Conformity assessment guide
TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 4: Operating requirements, marking and operating instructions
TSE K 268 Hydrocyclone
TSE K 270 Gravel Filter
TSE K 281 Hydraulic automatic filter
TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN 62056-3-1 Electrical measurements - Information exchange for reading schedules or load control - Part 3-1- Use of local area network on twisted fence with carrier marking
TS EN 50600-2-1 Information technology - Data center facilities and infrastructure - Part 2-1: Building construction
TS EN ISO 1452-2 / D1 Plastic pipe systems - For potable and potable water - Used in underground and surface pressure sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 2: Pipes
TS 13072 Authorized services - Rules for heating installations and plumbing
TS EN 12159 Construction hoists - For transporting personnel and materials - Vertical guide rail, with cab
TS EN 13141-8 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 8: Performance tests of ductless mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems designed for single room
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
TSE CEN / TS 16628 Energy performance of buildings - Basic principles for the EPB Standard series
TSE CEN / TS 16629 Energy performance of buildings - Detailed technical rules for the EPB Standard series
TS HD 60364-7-753 Low voltage electrical installations - Part 7 - 753: Rules for special installations or locations - Heating cables and embedded heating systems
TSE CEN / TR 13801 Waste discharge in soil and building structure (low and high temperature) Plastic pipe systems - Thermoplastic - Recommended Application for Installation
TS IEC 60050-826 International Electrotechnical Glossary - Part 826: Electrical Installations
TS EN 14908-1: 2014 Open data communication for building automation, controls and building management - Control network protocol - Part 1: Protocol stack
TS EN 14908-2 Open data communication for building automation, controls and construction management - Control network protocol _ section 2: Twisted pair communication
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
TS EN 31 + A1 Washbasins - Connection dimensions
TS EN 35 Floor standing and wall mounted bidets - On the edge of the tap holes - Connection dimensions
TS EN 81-22 Safety rules for the construction and installation of elevators - Elevators for transport of persons and goods - Part 22: Electric elevators for inclined plane
TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems (ISO 15758: 2014)
TS EN 81-20 Safety rules for the construction and installation of elevators - Elevators for the transport of persons and goods - Part 20: Elevators of persons and goods
TS EN 81-20 Elevators - Safety regulations for building and installation - Elevators for man and freight - Part 20: Man and load elevators
TS EN 81-50 Safety rules for construction and installation of elevators - Inspection and tests - Part 50: Design rules, calculations, inspections and tests of elevator components
TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method (ISO 10052: 2004)
TS EN 81-50 Safety rules for the construction and installation of elevators - Inspection and tests - Part 50: Design rules, calculations, inspections and tests of elevator components
TS EN ISO 4064-1 Water meters for cold drinking water and hot water - Part 1: Metrology and technical requirements
TS EN ISO 4064-2 Water meters for cold drinking water and hot water - Part 2: Test methods
TS EN ISO 4064-3 Water meters for cold drinking water and hot water - Part 3: Test report format
TS EN ISO 4064-4 Water meters for cold drinking water and hot water - Part 4: Non-metrological requirements not covered by ISO 4064-1
TS EN ISO 4064-5 Water meters for cold drinking water and hot water - Part 5: Installation requirements
TSE CEN / TS 16628 Energy performance of buildings - Basic principles for the EPB standard series
TSE CEN / TS 16629 Energy performance of buildings - detailed technical rules for the EPB standard series
TSE CEN / EN 81-12 Lifts - Safety regulations for construction and installation - Basics and comments - Part 12: Use of EN 81-20 and EN 81-50 in specific markets
TS EN 50174-2 / A2 Information technology - Cabling installation - Part 2: Installation planning and indoor applications
tst 13630 Lifts - F90 Class fire resistant sliding doors
TS HD 60364-7-717: 2010 / AC: 2014 Electrical installations in buildings - Part 7.717: Rules for special installations or locations - Mobile or portable unit
TS HD 60364-7-753: 2014 / AC Low voltage electrical installations - Part 7 - 753: Rules for special installations or places - Heating cables and embedded heating systems
TSE CEN / TR 1749 European program for the classification of gas appliances by combustion products discharge method
TS EN 31 + A1 Washbasins - Connection dimensions
TS EN 35 Floor standing and wall mounted bidets - On the edge of the tap holes - Connection dimensions
TS EN 81-22 Safety rules for the construction and installation of elevators - Elevators for transport of persons and goods - Part 22: Electric elevators for inclined plane
TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems (ISO 15758: 2014)
TS EN 81-20 Safety rules for the construction and installation of elevators - Elevators for the transport of persons and goods - Part 20: Elevators of persons and goods
TS EN 81-20 Elevators - Safety regulations for building and installation - Elevators for man and freight - Part 20: Man and load elevators
TS EN 81-50 Safety rules for construction and installation of elevators - Inspection and tests - Part 50: Design rules, calculations, inspections and tests of elevator components
TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method (ISO 10052: 2004)
TS EN 81-50 Safety rules for the construction and installation of elevators - Inspection and tests - Part 50: Design rules, calculations, inspections and tests of elevator components
TS EN ISO 4064-1 Water meters for cold drinking water and hot water - Part 1: Metrology and technical requirements
TS EN ISO 4064-2 Water meters for cold drinking water and hot water - Part 2: Test methods
TS EN ISO 4064-3 Water meters for cold drinking water and hot water - Part 3: Test report format
TS EN ISO 4064-4 Water meters for cold drinking water and hot water - Part 4: Non-metrological requirements not covered by ISO 4064-1
TS EN ISO 4064-5 Water meters for cold drinking water and hot water - Part 5: Installation requirements
TSE CEN / TS 16628 Energy performance of buildings - Basic principles for the EPB standard series
TSE CEN / TS 16629 Energy performance of buildings - detailed technical rules for the EPB standard series
TSE CEN / EN 81-12 Lifts - Safety regulations for construction and installation - Basics and comments - Part 12: Use of EN 81-20 and EN 81-50 in specific markets
TS EN 50174-2 / A2 Information technology - Cabling installation - Part 2: Installation planning and indoor applications
tst 13630 Lifts - F90 Class fire resistant sliding doors
TS HD 60364-7-717: 2010 / AC: 2014 Electrical installations in buildings - Part 7.717: Rules for special installations or locations - Mobile or portable unit
TS HD 60364-7-753: 2014 / AC Low voltage electrical installations - Part 7 - 753: Rules for special installations or places - Heating cables and embedded heating systems
TSE CEN / TR 1749 European program for the classification of gas devices according to the discharge method of combustion products (types)
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TSE K 325 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TS EN 62056-9-7 Electricity meter data exchange - DLMS / COSEM package - Part 9 - 7: Communication profile for TCP-UDP / IP networks (IEC 62056-9-7: 2013)
TS EN 1487 Building valves - Hydraulic safety groups - Tests and features
TSE CEN / TS 14632 Plastic pipe systems - pressurized and unpressurized; for drainage, sewage and water applications - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Conformity assessment guide
TSE CEN / TS 14632 Plastic pipe systems - pressurized and unpressurized; for drainage, sewage and water applications - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Conformity assessment guide
TS EN 12828 + A1 Heating systems - Buildings - Design of water-operated heating systems
TS EN 15700 Safety of conveyor belts for winter sports and free use
Safety regulations - for household and similar electrical appliances - part 7936- 60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers
TS EN 13203-1 Domestic electrical appliances for producing hot water gas - Electrical appliances not exceeding the 300 L water storage capacity and 70 kW heat input - Part 1: Evaluation of hot water supply performance
TS EN 442-2 Radiators and convectors-Section 2: Test methods and evaluation
TS EN 442-1 Radiators and convectors-Section 1: Technical specifications and rules
TS EN 12309-3 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 3: Test conditions
TS EN 12309-4 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 4: Test methods
TS EN 12309-5 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 5: Requirements
TS EN 12309-6 Air-conditioning and / or heat pump devices-Gas burner-Absorbable and adsorbed-Net heat input up to 70 kw (including 70 kw)
TS EN 62053-24 Electrical measuring equipment (aa) - Particular requirements - Part 24: Static meters for reactive energy at basic frequency (classes 0,5 S, 1 S and 1)
TS EN 12309-7 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 7: Particular requirements for hybrid devices
TS EN 13141-6 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 6: Exhaust ventilation systems used in a single dwelling "
TS EN 1253-1 Sieves for buildings - Part 1: Floor drains insulated against water with a depth of at least 50 mm
TS EN 1253-2 Sieves for buildings - Part 2: Floor drains and roof drains
TS EN 16430-1 Fan-assisted radiators, convectors and shield convectors - Part 1: Technical specifications and requirements
TS EN 16430-2 Fan-assisted radiators, convectors and shield convectors - Part 2: Test method and evaluation for thermal power
TS EN 16430-3 Fan-assisted radiators, convectors and shield convectors - Part 3: Test method and evaluation for cooling capacity
TS EN 14154-4 Water meters - Part 4: Additional functions
TSE CEN / TR 16787 Industrial Gas Installation - Manual
TS EN 16146 + A1 Sanitary fittings - Removable shower hoses for sanitary fittings in Type 1 and type 2 water supply systems - General specifications
TS HD 60364-4-42: 2011 / A1 Low voltage electrical installation -Part 4-42: Protection for safety -Protection against thermal effects
TS HD 60364-8-1 Low voltage electrical installation - Part 8-1: Energy efficiency
TSE CEN / EN 13737-2 Gas infrastructure - Application guide for functional standards prepared by CEN / TC 234 - Part 2: National pages of CEN / TC 234 standards
TS EN 14366 Laboratory measurement of noise from wastewater plants
TS EN ISO 16032 Acoustics - Measurement of sound pressure levels in buildings caused by service equipment - Engineering method
tst EN 14459 Control functions in electronic systems for gas burners and gas burners - Methods for classification and evaluation
TS EN 14459 Control functions in electronic systems for gas burners and gas burners - Methods for classification and evaluation
TS EN 303-6 Boilers - Part 6: With forced draft burners - Basic features for the domestic hot water operation of combined boilers with atomized liquid fuel burners not exceeding the nominal heat input 70 kW
TS EN 304 / A1 Boilers - Test rules for liquid fuel injection burners
TS EN 304 / A2 Boilers - Test rules for liquid fuel injection burners
TS EN ISO 10121-1 Test method for the performance evaluation of air purifying agent and general ventilation devices in the gas phase
TS EN 14337 Heating systems for buildings - Design and installation of direct electric room heating systems
TS EN 15255 Energy performance of buildings - Calculation of reasonable load for room cooling - General criteria and validation procedures
TS EN 15243 Room temperatures, load and energy calculation for buildings with ventilation room conditioning system for buildings
tst EN 15193 Energy performance in buildings-Energy properties for lighting
TS EN 15193 / AC Energy performance in buildings-Energy properties for lighting
TS EN 15459 Energy performance in buildings-Economic evaluation procedure for energy systems in buildings
TS HD 60364-5-51 / A11 Electrical installation in buildings - Part 5-51 - Selection and installation of electrical equipment - Common rules
TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems
TS EN 12102 Air conditioners, liquid cooling packages, heat pumps and dehumidifiers driven by electric compressors for heating and cooling spaces - Measurement of airborne noise - Determination of sound power level
TSE K 379 Bathroom Accessories
TS HD 60364-7-718 Low-voltage electrical installations - Part 7-718: Rules for special installations or spaces - Public areas and workplaces (IEC 60364-7-718: 2011)
TS EN 442-1 Radiators and convectors-Section 1: Technical specifications and rules
TS EN 442-2 Radiators and convectors-Section 2: Test methods and evaluation
TSE K 502 TWO AND THREE WAY TAPS
TS EN 12480 Gas meters - Rotary displacement gas meters
TS EN 12050-1 Wastewater lifting plants for buildings and settlements - Part 1: Wastewater lifting plants for faeces
TS EN 12050-2 Wastewater lifting plants for buildings and settlements - Part 2: Wastewater lifting plants without feces
TS EN 12050-3 Wastewater lifting plants for buildings and residential areas - Part 3: Lifting plants for limited applications
TS EN 12050-4 Wastewater lifting plants for buildings and settlements - Part 4:: One-way valves for wastewater with and without feces
TS EN ISO 13845 Plastic pipe systems - Joints made of ring-type elastomeric seal for thermoplastic pressure pipes - Test method for sealing under internal pressure and angular bending
TS EN ISO 13844 Plastic pipe systems - Joints with elastomeric sealing ring type pipe heads used with pressure plastic pipes - Test method for sealing under vacuum, angular deflection and deformation
TS EN 12480 Gas meters - Rotary displacement gas meters
TSE K 376 Steel Insulator Pipe Fittings
TSE K 435 Sanitary Wares - Sinks Used in Home and Similar Places - From Cross-linked Cast Acrylic Sheets - Specifications
TS EN 12327 Gas supply systems - Pressure test, commissioning and decommissioning - Functional requirements
TS EN 303-1 / A1 Boilers - Part 1: Boilers with forced draft burners - Terms and definitions, general requirements, tests and marking
TS EN 14992 + A1 Precast concrete products - Wall elements
TS EN 12309-1 Air-conditioning and / or heat pump devices-Gas burner-Absorption and adsorption-Net heat input up to 70 kw (including 70 kw) -Chapter 1: Terms and definitions
prEN 16798-5-1 -
TS EN ISO 15957 Test powders for the evaluation of air cleaning equipment (ISO 15957: 2015)
TSE K 169 / T1 Plastic pipe systems - Used for disposal of cold and hot wastewater in the building - Made of mineral doped polypropylene (PP) - Features of soundproof pipes, fittings and system
TS 13694 Toilet Seats - Plastic
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 1: General
TS ISO 4190-5 Elevators and service lifts - Part 5: Control devices, signals and additional connections
TS EN 14428 Shower cubicles - Functional requirements and test methods
TS EN 997 + A1 One piece toilet bowl with flush toilet
TS EN 81-72 Lifts - Safety regulations for construction and installation - Special applications for passenger and freight elevators section 72: Firefighting lifts
TS EN ISO 25745-2 Energy performance of elevators, escalators and moving walks - Part 2: Energy calculation and classification for elevators (elevators)
TS EN ISO 25745-3 Energy performance of elevators, escalators and moving walks - Part 3: Energy calculation and classification of escalators and escalators (ISO 25745-3: 2015)
TS EN 13203-2 Gas-fired appliances-Indoor-Hot water-generating devices 300litre water storage capacity and heat input 70kw'e devices section 2: Evaluation of energy consumption
TS EN 26 For hot water production Gas-fired, atmospheric burners Instantaneous water heaters (water heaters)
TS EN 89 Water Heaters (storage water heaters) -Gas burner-For home use
TS EN 15502-1 + A1 Gas-fired boilers - Part 1: General rules and tests
TS EN 834 / AC Heat cost splitters-Radiators used in determining heat consumption -Working with electrical energy
TS EN 13141-11 Ventilation for buildings - Performance testing of components / products for residential ventilation - Part 11: Supply ventilation units
TS EN 16211 Ventilation for buildings - Air Measurement sites - Methods
TS EN ISO 11855-2 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 2: Design heating determination and cooling capacity (ISO 11855-2: 2012)
TS EN ISO 11855-2 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 2: Design heating determination and cooling capacity (ISO 11855-2: 2012)
TS EN ISO 11855-3 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3: 2012)
TS EN ISO 11855-3 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3: 2012)
Building environment design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 11855: Dimensioning and calculation of dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 4-4: 11855)
Building environment design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 11855: Dimensioning and calculation of dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 4-4: 11855)
TS EN ISO 11855-5 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5: 2012)
TS EN ISO 11855-5 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5: 2012)
TSE CLC / TS 50568-4 Electrical meter data exchange - Part 4: Low-layer PLC profile using SMITP B-PSK PLC modulation
TSE CLC / TS 50568-8 Electrical meter data exchange - DLMS / COSEM layer - Part 8: SMITP PLC B-PSK communication profile, SMITP Local data exchange profile and SMITP B- for neighboring networks, including Original SMITP communication profile PSK PLC communication profile
TSE CLC / TS 50590 Electrical meter data exchange - Low-layer PLC profile using Adaptive Multi-Carrier Propagation pSpectrum (AMC-SS) modulation
TSE CLC / TS 52056-8-4 Electrical meter data exchange - DLMS / COSEM layer - Part 8-4: Narrow-band OFDM PRIME PLC communication profile for neighboring networks
TSE CLC / TS 52056-8-5 Electrical meter data exchange - DLMS / COSEM package - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighboring networks
TSE CLC / TS 52056-8-7 Electrical meter data exchange - DLMS / COSEM layer - Part 8-7: AMC-SS PLC communication profile for neighboring networks
TS EN 14055 + A1 WC and dissipation tanks
TS EN 1113 Sanitary fittings - General technical specifications - Type 1 and type 2 water supply systems, shower hoses for sanitary fittings
TS EN 62056-1-0 Electricity meter data exchange - DLMS / COSEM layer - Intelligent meter standardization structure (IEC 62056-1-0: 2014)
TS EN ISO 11855-1 Building environmental design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definitions, symbols and comfort criteria (ISO 11855-1: 2012)
TS EN ISO 11855-1 Building environmental design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definitions, symbols and comfort criteria (ISO 11855-1: 2012)
TS EN 13407 Suspended urinals - Functional requirements and test methods
TS EN 14296 Sanitary applications - Public washing troughs
TS EN 12764 Sanitary wares - Technical specifications for swirl bathrooms
TS EN 14528 Bidets - Functional requirements and test methods
TS EN 14688 Sanitaryware - Washbasins - Functional requirements and test methods
TS 10276 Filters - Used in internal gas installations
tst EN 997 + A1 Integrated flush toilets and closet sets
tst EN 14055 + A1 WC and urinal cisterns
tst EN 13407 Suspended urinals - Functional requirements and test methods
tst EN 14528 Bidets - Functional requirements and test methods
TS EN 14688 Sanitary Wares - Sinks - Functional requirements and test methods
TS HD 60364-4-43 Low voltage electrical installations - Part 4-43: Safety protection - Overcurrent protection (IEC 60364-4-43: 2008, modified + corr. October 2008)
TS EN 50440 Efficiency and test methods of household electric storage water heaters
TS HD 60364-7-704 / AC Low-voltage electrical installations - Part 7-704: Rules for special installations or locations - Installations on construction and demolition sites
tst EN 13618 Flexible connection hoses for drinking water installations - Functional specifications and test methods
TS 12255 Authorized Services - Elevator Maintenance Services - Rules
tst 579 / T4 Valves and fittings (for radiators)
tst EN 12015 Electromagnetic compatibility - Product family standard for elevators, escalators and escalators - Emission
TS EN 488 Central heating pipes - Pre-insulated pipe systems for direct buried hot water networks - Steel valve assembly for polyurethane heat-insulated, polyethylene outer casing steel service pipes
tst EN 12016 Electromagnetic compatibility - Product family standard for elevators, escalators and conveyors - Immunity
TS EN 12016 Electromagnetic compatibility - Product family standard for elevators, escalators and conveyors - Immunity
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
TSE K 325 / T1 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TS 10880 Expansion Joints - Steel bellows - Used in gas pipelines and installations
TS EN 12405-3 Gas meters - Conversion devices - Part 2: computer flow
TS HD 60364-4-443 Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Substance 443: Protection against atmospheric and switching overvoltages
TS HD 60364-5-534 Low voltage electrical installations - Part 5 - 53: Selection and installation of electrical equipment - Separation, switching and control - Part 534: Surge protection devices
TS EN 14516 Bathtubs - For household and similar use
TS EN 15719 Sanitaryware - Baths made of impact-resistant extruded abs / acrylic sheets - Specifications and test methods
TS HD 60364-7-722 Low-voltage electrical installations - Rules for special facilities and locations - Supply of electric vehicles
TS EN 15650 Ventilation and fire dampers in buildings
TS CWA 16975 Economically efficient intermediate stations for district heating
TS HD 60364-5-53 Low voltage electrical installations - Part 5-53: Selection and installation of electrical equipment - Switchgear and controlgear
TS EN 14037-1 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºC - Part 1: Ceiling mounted radiant panels ready for ambient heating - Technical specifications and requirements
TS EN 14037-2 120 Ceiling-mounted irradiation panels with water supply below ° C - Part 2: Ceiling mounted radiant panels ready for ambient heating - Test method for thermal output
TS EN 14037-3 120 Ceiling-mounted irradiation panels with water supply below ° C - Part 3: Ceiling mounted radiant panels ready for ambient heating - Evaluation method and evaluation of radiant thermal output
TS EN 81-73 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 73: Behavior of elevators in case of fire
TS EN 16578 Ceramic sanitary ware - Sustainability assessment
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
tst EN 81-72 Lifts - Safety regulations for construction and installation - Special applications for passenger and freight elevators Section 72: Firefighting lifts
TS EN 81-73 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 73: Behavior of elevators in case of fire
TSE CEN / TS 115-4 Safety on escalators and escalators - Comments on EN 115-originated standards
TS EN 14428 Shower cabinets - Functional requirements and test methods
TS HD 60364-4-41 / D1 Low voltage electrical installations - part 4 - 41: Protection for safety - Protection against electric shock
TS EN 81-20 / D1 Elevators - Safety regulations for construction and installation - Elevators for human and freight transport - Part 20: Elevators for people and goods
TS EN 50193-2-1 Electric instantaneous water heaters - Part 2-1: Performance Measurement Methods -Multifunctional electric instant water heaters
TS EN 61140 Protection against electric shock - common features for installations and equipment
TS HD 60364-5-551 / A11 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment - Group 55: Other equipment - Part 551: Low voltage generator sets
TS HD 60364-7-712 Electrical installation in buildings - Part 7-712: Requirements for special installations and locations - Solar photovaltaic (pv) power supply systems
TS HD 60364-5-557 / A11 Electrical installation in buildings - Part 5-557: Selection and installation of electrical equipment - Auxiliary circuits
TS EN 1253-4 Strainers - Used in buildings - Part 4: Inlet covers
TS EN 1253-3 Strainers - Used in buildings - Part 3: Quality control
TS EN 50310 Equivalent bonding and grounding application - for buildings with information technology equipment
TSE K 518 LIFT CABINET
TS EN 50193-1 Electric instantaneous water heaters - Part 1: General rules
TS EN 12897 Water supply - Specification for indirectly heated unventilated (closed) water tanks
TS EN 62052-31 Electrical measuring equipment (aa) - General rules, tests and test conditions - Part 31: Product safety guidelines and tests
TS EN 14527 Shower trays - for home and similar use
TS EN ISO 16170 Test methods for filter systems in case of very high efficiency for industrial plants
TSE CLC / TS 50612 Portable electrical devices for measuring flue gas combustion parameters - Guidance for commissioning, service and maintenance of gas-fired central heaters
TS HD 60364-6 Low voltage electrical installations - Part 6: Verification
tst EN 1253-1 Sieves for buildings - Part 1: Floor drains with siphon seal against water at least 50 mm depth
tst EN 1253-2 Drains for buildings - Part 2: Floor drains and roof drains
TSE K 522 Filter Coatings for Surface Drainage Pipes
TSE K 518 / T1 LIFT CABINET
TSE K 525 LIFT STOPS AND CABIN DOORS
TS EN ISO 15858 UV-C Devices - Safety information - Allowed human exposure
TSE CEN / EN 12098-6 Controllers for heating systems - Part 6: TR prEN 12098-1: accompanying 2015 - Modules M3-5,6,7,8
TSE CEN / TR 12098-7 Controls for heating systems - Part 7: TR prEN 12098-3: accompanying 2015 - Modules M3-5,6,7,8
TSE CEN / EN 12098-8 Controls for heating systems - Part 8: EN prEN 12098-5: accompanying 2015 - Modules M3-5,6,7,8
tst EN 81-22 Safety rules for the construction and installation of elevators - Elevators for transport of persons and goods - Part 22: Electric elevators for inclined plane
TS EN 14037-4 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºc - Part 4: Prefabricated ceiling-mounted radiant panels - Test method for cooling capacity
TS EN 14037-5 120 Ceiling-mounted radiation panels supplied with water below ° C Section 5: Open or closed heated ceiling surfaces - Test method for thermal output
TS EN 81-21 + A1 Elevators - For the transport of persons and cargo - Safety rules for construction and installation - Part 21: New elevators for the transport of people and goods / people in existing buildings
TS EN 81-82 Safety rules for construction and installation - Existing elevators - Part 82 - Improving accessibility to existing elevators including disabled
TS EN 13203-4 Hot water-generating gas appliances - Part 4: Assessment of the energy consumption of hot water and electricity generating gas combined heat and electrical devices (mCHP)
TS HD 60364-4-46 Low voltage electrical installation - Section 4-46: Protection for safety
TS HD 60364-5-537 Low voltage electrical installation - Part 5-537: Selection and installation of electrical equipment - Arrangements for protection, disconnection, switching, control and monitoring - Item 537: Disconnection and switching
TS 13736 Authorized Services - Elevator Drives - Rules
TS EN ISO 11177 Glass and porcelain enamels - internal and external enamelled valves and pressure piping for untreated and drinking water lines - Quality requirements and testing
TS HD 60364-5-53 Low voltage electrical installations - Part 5-53: Selection and installation of electrical equipment - Switchgear and controlgear
tst EN 14527 Shower trays - for home and similar use
prEN 81-77 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 77: Elevators subject to seismic conditions
TS EN 62056-4-7 Electrical measurement data exchange - DLMS / COSEM package - Part 4-7: DLMS / COSEM transfer layer for IP networks
TS EN 62056-5-3 Electrical measurement data exchange - DLMS / COSEM package - Part 5-3: DLMS / COSEM application layer
TS EN 62056-6-1 Electrical measurement data exchange - DLMS / COSEM package - Part 6-1: Object Identification System (OBIS)
TS EN 62056-6-2 Electrical measurement data exchange - DLMS / COSEM package - Part 6-2: COSEM interface classes
TS EN 62056-7-5 Electrical measurement data exchange - DLMS / COSEM package - Part 7-5: Local data transfer profiles (LN) for Local Area Networks
TS EN 50193-2-2 Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point electric instantaneous heaters - Efficiency
TS EN 1453-1 Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 1 - Pipes and system features
tst 2017114833 Anti-bacterial Plumbing fixtures and accessories
tst 2017114867 (TSE K 379) Bathroom Accessories
TSE CEN / TR 16940 Domestic gas installations - Safety recommendations
tst 2017114849 Duct Type Shelter Ventilation Device
TS EN 13053 + A1 Ventilation of buildings-Air transport units-Performance and proportions of units, components and parts
TS EN 15502-2-1 + A1 Gas-fired central heating boilers - Part 2-1: Specific standards for Type C devices and devices of the type B1.000, B2 and B3 not exceeding 5 kW of nominal heat input
TS EN ISO 16890-1 Air filters for general ventilation - Part 1: technical specifications, requirements and classification system based on particulate matter efficiency (ePM) (ISO 16890-1: 2016)
TS EN ISO 16890-2 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2: 2016)
TS EN ISO 16890-3 Air filters for general ventilation - Part 3: Determination of gravimetric efficiency and airflow resistance to the mass of captured test dust (ISO 16890-3: 2016)
TS EN ISO 16890-4 Air filters for general ventilation - Part 4: Conditioning method for determining minimum fractional test efficiency (ISO 16890-4: 2016)
TSE K 542 Ventilation components - Buildings - End elements - Grids, diffusers (anemostads), shutters - Features and tests
TS EN 81-20 / D2 Elevators - Safety regulations for construction and installation - Elevators for human and freight transport - Part 20: Elevators for people and goods
TSE K 540 Ventilation units - In buildings - Cell - Aspirators - Ventilators - Specifications and Tests
TSE K 541 Ventilation - air dampers in buildings
TSE K 543 Metal flange profiles - Used in air ducts - Features and tests
TSE K 538 Ventilation - Mufflers used in air ducts in buildings - Features and tests
TSE K 536 Ventilation units - Metallic and synthetic filters used in buildings - Features and tests
TSE K 537 Control covers - Used in air ducts - Features and tests
TS HD 60364-6 / A11 Low-voltage electrical installations-Part 6: Verification
TS EN 62052-21 / A1 Electrical measuring equipment (AC) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
TS EN 62053-24 / A1 Electrical measuring equipment (aa) - Specific requirements - Part 24: Static meters for measuring reactive energy at the basic frequency - (class 0,5 S, class 1 S and class 1)
TS EN 62054-11 / A1 Electric meter (aa) - Tariff and load control - Part 11: Particular requirements for electronic wavelet control receivers
TS EN ISO 15876-1 Plastic pipe systems -Used in hot and cold water systems-Polybutylene (pb) -Chapter 1: General
TS EN ISO 15876-2 Plastic pipe systems -Used in hot and cold water systems-Polybutylene (pb) -Chapter 2: Pipes
TS EN ISO 15876-5 Plastic pipe systems - Used in hot and cold water systems - Polybutylene (pb) - Part 5: suitability of the system for its purpose
TSE CEN / TS 1453-2 Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 2 - Conformity assessment guide
TS EN 16573 Ventilation for buildings - Performance testing of components of residential buildings - Multifunctional balanced ventilation units for single-family dwellings, including heat pumps
TS EN 16830 Safety and control devices for gas and liquid fuel burners and appliances - Control functions in electronic systems - Temperature control function
tst 12255 / T1 Authorized services - Elevator Maintenance Services - Rules
TS EN 12050-1 Wastewater lifting plants for buildings and settlements - Part 1: Wastewater lifting plants for faeces
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
tst 6356 Natural gas meters - Two connection connection heads
TSE CEN / EN 15193-2: 2017 Energy performance in buildings - Energy requirements for lighting - Part 2: EN 15193-1 Module M9
TS 7363 Natural gas - Building indoor installation design and application rules
TS EN 15193-1 Energy performance in buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
TS EN 1359 Gas meters with diaphragm
TS EN 15316-2-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 2: Space heating emission systems
TS EN 36 Suspended bidets - Connection sizes with battery holes
TS EN 80 Suspended urinals - Connection dimensions
TS EN 81-43 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 43: Elevators for cranes
TSE CEN / EN 81-10 Elevators - Safety rules for construction and installation - Basics and comments - Part 10: Systematic of most 81 series standards
TS EN 81-3 + A1 Lifts - Safety requirements for construction and installation - Part 3: Electrical and hydraulic service lifts
TS EN 81-71 + A1 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 71: Intentional damage-resistant elevators
TSE CEN / TS 81-11: 2011 Elevators - Safety rules for construction and installation - Basics and comments - Part 11: Comments on most 81 family standards
TS EN 200 Sanitary fittings - Faucets and taps for type 1 and type 2 water supply systems - General specifications
TS 102 EN 512 Fiber cement - pressure pipes and fittings
TS 102 EN 512 / tst T Fiber cement - pressure pipes and fittings
TS EN 115-2: Safety for escalators and escalators - Part 2010: Rules for improving the safety of existing escalators and escalators
TS HD 193 S2 Electrical installation in buildings - Voltage bands
TS EN 198 Sanitaryware - Bathtubs - Cross-linked cast acrylic sheets - Specifications and test methods
TS EN 215 / T1 Radiator valves - Thermostatic - Features and test methods
tst EN 248 Sanitary fittings - Electrolytic chromium-Nickel platings-General technical specifications
TS EN 249 Sanitaryware - Shower trays - Cross-linked cast acrylic sheet - Requirements and test methods
TS EN 263 Sanitary ware - Cross-linked cast acrylic sheets for bath tubs and shower trays for domestic use
TS EN 274-1 Waste fittings for sanitary installations - Part 1: Specifications
TS EN 274-3 Waste fittings for sanitary installations - Part 3: Quality control
TS 274-2 EN 1452-2 / tst T Plastic piping systems for drinking and potable water - Part of polyvinyl chloride (pvc-U) without plasticizer 2: Pipes
TS 274-3 EN 1452-3 / tst T Plastic piping systems for drinking and potable water - Non-plasticizing polyvinyl chloride (pvc-U) - Part 3: Fittings
TS EN 303-6 Boilers - Part 6: Forced hammer brol - Key features for the domestic hot water operation of combined boilers with atomized liquid fuel burner not exceeding the rated thermal input 70 kw
TS EN 303-1 / A1 Boilers boilers with forced draft burner - Part 1: Terms and definitions general features experiments and marking
TS EN 303-2 / A1 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with spray fuel burners
TS EN 304 / A1 Boilers - Test rules for liquid fuel injection burners
TS EN 304 / A2 Boilers - Test rules for liquid fuel injection burners
TS HD 308 S2 / T1 Introduction of cores in cables and flexible cords modification 1
TS 327 Strainers for sewage installation
TS 366 Hela washers-Pressure
TS 366 / T1 Hela washers-Pressure
TS 366 / T2 Hela washers-Pressure
TS 366 / T3 Pressure washer (basses)
TS HD 384.4.45 S1 Electrical installation in buildings section 4: Safety group 45- Protection against voltage drop
TS HD 384.7.753 S1 Building electrical installations - Part 7: Requirements for special installations and locations - Part 753: Floor and ceiling heating systems
TS HD 384.7.753 S1 Building electrical installations - Part 7: Requirements for special installations and locations - Part 753: Floor and ceiling heating systems
tst HD 384.4.46 S2 Electrical installation in buildings - Part 4: Protection group for safety 46: Isolation and switching
tst HD 384.6.61 S2 Electrical installation in buildings section 6: Verification group 61: Initial verification
TS HD 384.4.482.S1 Electrical installation in buildings - Part 4: Safety protection - Group 48: Selection of protective measures due to external influences - Part 482: Protection against fire at special risks or hazards
TS HD 384.4.473 S1 Electrical installation in buildings - Part 4: Safety protection - Group 47: Application of protection measures - Part 473: Overcurrent protection
TS 455 / T1 Gas meters (with bellows)
TS 459 Hatches used in drinking water network
TS 459 Hatches used in drinking water network
TS 496 Principles of natural ventilation of windows and bathrooms with chimneys
TS 579 / T1 Valves and fittings (for radiators)
TS 579 / T2 Valves and fittings - Modified 2 used in heating systems
TS 579 / T3 Valves and fittings - used in heating systems
TS 583 Faucets (for compressed air)
TS EN 588-2 Pipes - Made of fibrous cement - For drainage and sewage - Part 2: Inspection manholes and inspection chambers
tst 605 Washbasins (ceramic or cast iron)
TS 615 EN 26 / tst T1 Instantaneous water heaters, gas-fired, with atmospheric burners
TS EN 641 Reinforced concrete pipes - Pressure - Steel jacketed type - Joints and joint special parts
TS EN 15316-1 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 1: General
TS 733 Thermosyphons - Solid fuel burning
TS 737 Water filters (sand filters)
TS EN 816 Sanitary fittings faucets and mixers-Automatic closing-Pn 10
TS EN 1111 Sanitary fittings - Thermostatic mixers (pn 10) - general technical specifications
TS 1120 Rules for the installation of gas and electricity meters
TS 1120 Rules for the installation of gas and electricity meters
TS EN 1148 Heat exchangers - From water to water - Used in district heating - Tests for obtaining performance data
TS EN 1148 / A1 Heat exchangers - From water to water - Used in district heating - Tests for obtaining performance data
TS 1176 Design and application principles of gas installation in buildings
TS 1196 Electrical installation project principles
TS 15 EN 1213 Valves - Used in buildings - Copper alloy stop valves for drinking water supply - Tests and specifications
TS 1258 Clean water installation account rules
TS EN 1264-3 Floor heating - Systems and components - Part 3: Sizing
TS EN 1264-4 Floor heating - Systems and components - Part 4: Installation
TS EN 1264-5 Floor-mounted hot-water heating systems section 2: Floor and ceiling embedded heating and cooling surfaces - for determination of thermal power
TS EN 1286 Plumbing fixtures-Low pressure mechanical mixer-General technical specifications
TS EN 1287 Plumbing - Low pressure thermostatic mixing valves - General specifications
TS EN 1451-1 Plastic pipe systems - Used for disposal of cold and hot wastewater in buildings - Section of polypropylene (pp) 1: Pipes, fittings and system features
TS EN 1451-1 / T1 Plastic pipe systems-Used for disposal of cold and hot wastewater in building-Polypropylene (pp) section 1: Pipes, fittings and system properties
TS EN ISO 1452-2 Plastic pipe systems - For drinking and potable water - Used in underground and surface pressure sewage systems - Polyvinyl chloride (pvc-U) without plasticizer - Part 2: Pipes
TS EN ISO 1452-3 Plastic pipe systems - Used in potable and domestic water and underground and surface pressure drainage and sewerage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 3- Fittings
TS EN ISO 1452-4 Plastic pipe systems - Used for potable and potable water and underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 4: Valves
TS ENV 1452-6 Plastic piping systems for potable and potable water - Polyvinylchloride without plasticizer (pvc-U) - Part 6: Laying rules
TS EN ISO 1452-5 Plastic pipe systems - For drinking and potable water and for underground and surface pressure sewage systems - Part of polyvinyl chloride (pvc-U) without plasticizer 5: System suitability
TS EN 14652 + A1 Indoor water treatment equipment - Membrane separation devices - Performance, safety and test rules
TS 1480 Mud traps and rain funnels (for rainwater grating sets and sewer manhole covers)
TS 1480 / T1 Mud traps and rain funnels (for rainwater grating sets and sewer manhole covers)
TS EN 1488 Valves - Used in buildings - Expansion groups - Tests and features
TS EN 1489 Valves - Used in buildings - Pressure safety valves - Tests and specifications
TS 1499 Heating radiators
TS EN 1505 Ventilation in buildings-Made of sheet metal-Rectangular cross-section air ducts and fittings-Dimensions
TS EN 1506 Ventilation in buildings-Channel network-Circular cross-section sheet metal air ducts-Fasteners-Dimensions
TS EN 1507 Ventilation in buildings-Duct network-Rectangular cross-section sheet metal air ducts-Strength and tightness-Features and tests
TS EN 1520: 2011 Prefabricated reinforced concrete components made of porous lightweight concrete with structural or non-structural reinforcement
TS EN 1555-4 Plastic piping systems for the transport of gas fuels from polyethylene (pe) - Part 4: Valves
TS EN 1567 / T1 Valves - for buildings - Water pressure reducing and combined water pressure reducing valves - Features and tests
TS EN 1717 General features of pollution prevention devices for protection against contamination of drinking water in the water installation and backflow
TS CR 1752 Ventilation - Design rules for indoor environments for buildings
TS EN 1775 Gas supply - Gas piping for buildings - Functional recommendations with maximum operating pressure 5 bar and below
TS 1812 Calculation, design and construction rules of elevators (for electrically operated people and freight elevators)
TS EN 1886 Mechanical performance of air-conditioning units in buildings
TS 1907 Concrete brackets for rainwater grate chimneys
TS 1907 / T1 Concrete bracelets for rainwater grating chimneys
200977002 Hygienic air conditioning and ventilation project preparation, delivery and periodic maintenance in hospitals
TS 2164 Heating installation design rules
TS 2164 / T1 Heating installation design rules
TS 2164 / T2 Heating installation design rules
TS 2164: 1983 / T3 Heating installation design rules
TS 2192 Heating installation rules
tst 2747 Urinals (of ceramic)
tst 2748 Bidets (of ceramics)
tst 2750 Shower trays, ceramic
TS 2797 300 000 Rules for the design and installation of safety equipment in closed and open system hot water heating plants with thermostat safety leaving water temperature up to 110øc up to kcal / h
TS 2878 ISO 3258 Air distribution and air diffusion - Terms
TS 3418 Measurement of fluid flow in pipes terms and symbols
TS 3419 / T1 Ventilation and air conditioning plants - Design rules
TS 3420 Rules for installation of ventilation and air conditioning facilities
TS 3500 Symbols for installation projects
TS 3538 / T1 Plastic fittings (for plumbing)
TS 3541 Rules for the application of thermal insulation material from mineral fibers to heating and ventilation installations
TS 3818 Heating systems - Design, installation and safety rules of gas central combustion plants
TS 3818 / T1 Heating systems - Design, installation and safety rules of gas central combustion plants
TS ISO 4190-6 Elevators and service lifts - Part 6: Human elevators for residential use - Planning and selection
TS ISO 4190-6 / T1 Elevators and service elevators - Part 6: Human elevators for residential use - Planning and selection
TS EN 4421 Heat reflectors and radiators (radiators and convectors) - Part 1: Technical specifications and rules
TS ISO 7465 Lifts for people and goods - Guide rails for lift cars and counterweights - Type T
TS EN ISO 5135 Acoustics - Measurement of noise power levels in ventilation rooms, units, dampers and valves
TS 6081 Calculating the largest outer diameter of the cables used in indoor installation
TS 6134 Test equipment for electricity meters
TS 6356 Natural gas meters - Connection heads with two connections
TS 6356 / T1 Natural gas meters - Connection heads with two connections
TS 6356 / T2 Natural gas meters - Connection heads with two connections
TS 6356 / T3 Natural gas meters - Two connection connection heads modified 3
TS 6356 / T4 Natural gas meters - Connection heads with two connections
TSE EEC / 71 / 318: Council regulation 2001 on the approximation of the laws of the member states relating to gas meters, 26 july 1971 date and 71 / 318 / at (82 / 623 / at, 78 / 365 / at, 74 / at, 331 amended by the commission regulations)
TS 7817 Air purge device (automatic)
TSE / TS 8038 Liquefied petroleum gases (lpg) - Guide for odorizing gases
TS 8238 ISO 4190-2 Elevators - Dimensions related to installation section 2: Class iv elevators
TS 8239 Elevators- Automatic doors- Dimensions related to installation- Class 5- Service elevators
TS 9128 Pipes - Made of rigid pvc for drainage
TS ISO 9386-2 Power-driven lifting platforms for mobility-impaired people - Safety, dimensions and functional requirements - Part 2: Power-driven stair lift for moving users, standing users and wheelchair users in a tilted plane
TS ISO 9386-1 Power-driven lifting platforms for the disabled - Requirements for safety, dimensions and functional operation - Part 1: Vertical lifting platforms
TS 9128 Pipes - Made of rigid pvc for drainage
TS ISO 9386-2 Power-driven lifting platforms for mobility-impaired people - Safety, dimensions and functional requirements - Part 2: Power-driven stair lift for moving users, standing users and wheelchair users in a tilted plane
TS ISO 9386-1 Power-driven lifting platforms for the disabled - Requirements for safety, dimensions and functional operation - Part 1: Vertical lifting platforms
TSE 9954-7 CEN ISO / TS 15876-7 Plastic piping systems - Used in hot and cold water systems - Polybutylene (pb) - Part 7: Conformity assessment guide
TS 10762-2 EN ISO 15875-2 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 2: Pipes
TS 10762-3 EN ISO 15875-3 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 3: Fittings
TSE 10762-7 CEN ISO / TS 15875-7 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 7: Conformity assessment guide
TS EN ISO 11296-1: 2011 Plastic pipe systems for the renovation of underground pressure-free drainage and sewage lines - Part 1: General
TS 11394 + T3 Non-metal hose assemblies - Used for the safe connection of gas-fired devices (up to 10 kpa) - Gas hoses and connection fittings with connection plug
TS 11425 Insulation fittings-ready for installation for electrical insulation in building gas and water service lines
TS 11425 Insulation fittings-ready for installation for electrical insulation in building gas and water service lines
TSE CEN ISO / TS 15874-7 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 7: Conformity assessment guide
TS 11917 Fasteners - Nuts - Hexagon straight - Thin pitch - Tubular metal sheath - Electric heating elements - For
TS EN 12015 / tst T1 Electromagnetic compatibility (emu) - Product family standard for elevators, escalators and conveyor belts - Emission
TS EN 12056-5 Attractive drainage systems - Indoor - Part 5: Installation and testing, operation, maintenance and operating instructions
TS EN 12056-1 Attractive drainage systems - Indoor - part 1: General rules and performance rules
TS EN 12056-2 Attractive drainage systems - Indoor - section 2: Plumbing system - Design and calculation
TS EN 12056-3 Attractive drainage systems - Indoor - part 3: Roof drainage - Design and calculation
TS EN 12056-4 Attractive drainage systems - Indoor - section 4: Wastewater lifting plants - Design and calculation
TS EN 12095 Plastic pipe systems - Supports for rainwater pipe systems -Support resistance test
tst EN 12097 Ventilation for buildings - Ducts - Duct construction rules
TS EN 12098-5 Controls for heating systems - Part 5: Start-stop timers for heating systems "
TS EN 12109 Drainage systems for indoor use - vacuum
TS EN 12158-2 + A1 Construction cranes for articles - section 2: Inclined cranes with inaccessible load-carrying equipment
TS EN 12158-1 + A1 Construction cranes for articles - Part 1: Cranes with accessible platform
tst EN 12159 + A1 Construction cranes - For transporting personnel and materials - With vertical guide rail, with cab
TS EN 12171 Heating systems - Preparation of documents for operation, maintenance and use of buildings - Heating systems without the need for trained personnel
TSE 12182-7 CEN ISO / TS 15877-7 Plastic piping systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 7: Conformity assessment guide
TS EN ISO 12241 Thermal insulation for building equipment and industrial installations - Calculation rules
TS 5477 EN 12261 / A1 Gas meters - Turbine meters
TS EN 12279 Gas supply systems - Gas pressure regulating equipment on service lines - Functional specifications
TS EN 12279 / A1 Gas supply systems - Gas pressure regulating equipment on service lines - Functional features
tst EN 12380 Air intake valves for drainage systems - Rules, test methods and conformity assessment
TS EN 12380 Air intake valves for drainage systems - Rules, test methods and conformity assessment
TS EN 12502-1 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 1: General
TS EN 12502-4 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 4: Factors affecting stainless steels
TS EN 12502-2 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 2: Factors affecting copper and copper alloys
TS EN 12502-3 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 3: Factors affecting hot-dip galvanized iron-based materials
TS EN 12502-5 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 5: Factors affecting cast iron, unalloyed and low alloy steels
TS 12514 Combined heating devices "combi" gas-fired, with atmospheric burner -Regulation heat power does not exceed 70 kw-Mounting rules
TS 12514 Combined heating devices "combi" gas-fired, with atmospheric burner -Regulation heat power does not exceed 70 kw-Mounting rules
TS EN 12541 Plumbing - Pressurized toilet cistern valves and automatic urinal valves pn 10
TS EN 12589 Ventilation of buildings-Air terminal units aerodynamic experiments and the ratio of fixed and variable speed terminal units
TS EN 12666-1: 2005 + A1: 2011 Plastic pipe systems for non-pressurized groundwater and drainage - Polyethylene (pe) - Part 1: Specification for pipes, fittings and system
TS EN 12763 Pipe and fittings - Manufactured with fiber cement - Used in building waste water discharge systems - Dimensions and technical specifications used in shipment
tst EN 12764 + A1 Sanitary wares - Technical specifications for whirlpools
TS EN 12792 Ventilation for buildings - Symbols, terminology and graphic symbols
TS EN 12809 Boilers - For floor heating in residential buildings - Detached, solid fuel, rated heat output up to 50 kw - Specifications and test methods
TS EN 12809 / AC Boilers - Residential, individual, solid fuel for floor heating - Rated heat output up to 50 kw - Features and test methods
TS EN 12809 / A1 / AC Boilers - Residential, solid fuel for individual, floor heating - Rated heat output up to 50 kw - Specifications and test methods
TS EN 12831 Heating systems for buildings - Method for calculation and design of heat load
TS 12988 Businesses - Plumbing supplies sales and service places - General rules
TS 12988 / T1 Businesses - Plumbing supplies sales and service places - General rules amended 1
TS EN 13015 + A1 Maintenance of lifts and escalators - Rules for maintenance instructions
TS EN 13030 Ventilation in buildings-End elements- Performance test of ventilation ducts in simulated rain environment
TS EN 13053: 2006 + A1: 2011 (EN) Ventilation of buildings-Air transport units-Performance and proportions of units, components and parts
TS EN 13078 Preventing contamination from drinking water backflow - Immersion supply air gap with flood sluice and air intake - Group a, type c
tst EN 13079 Preventing contamination from back-escape of potable water-Air gap with injector-Class a- Type d
TS EN 13090 Gas pipe fitting - Seals for screw connections
TS EN 13141-1 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 1: external and internally mounted air transfer system "
TS EN 13141-3 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 3: aspirators for domestic use "
TS EN 13141-5 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 5: hoods and roof outlet terminal unit "
TS EN 13141-10 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 10: Humidity controlled filtered air end elements
TS EN 13141-9 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 9: Externally installed moisture controlled air conduction elements
TS EN 13141-4: 2011 (EN) Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 4: fans used in residential ventilation systems "
TS EN 13182 + AC Ventilation of buildings - Device features for measuring air velocity in ventilating volume
TS EN 13203-1 Gas-fired devices-Indoor-Hot water-producing devices 300litre water storage capacity and heat input 70kw'me devices section 1hot water outlet
TS 13317 Portable and stationary liquefied petroleum gas (LPG) cylinders used in forklifts, filling rules and safety regulations for use
TS 13392 Authorized services - Rules for shower enclosures
TS EN 13410 / AC Radiant heaters - Gas burning - Hanging on the ceiling - Ventilation rules for non-residential buildings
TS 13420 Ceramic sanitary ware with antibacterial surface properties - Test methods and properties
TS EN 13465 Ventilation for buildings - Calculation methods for determination of air flow in residential buildings
TS EN 13564-1 Flood protection devices - Used in buildings - Part 1: Rules
TS EN 13564-3 Flood prevention devices - Used in buildings - Part 3: Quality assuranceTS EN 14095 Water conditioning equipment inside buildings - Aluminum anode electrolytic treatment systems - Performance, safety and test conditions
TS EN 14124 Inlet valves - For float reservoirs
TS EN 14134 Ventilation in buildings - Performance tests and installation controls of residential ventilation systems
tst EN 14277 Ventilation of buildings - Air terminal devices - Air flow measuring method with calibrated sensors in or near ATD boxes
TS EN 14236 Ultrasonic household gas meters
TS EN 14239 Ventilation of buildings - Duct - Measurement of duct surface area
TS EN 14240 Ventilation in buildings - Refrigerated ceilings - Tests and ratings "
TS EN 14277 Ventilation-for-buildings-Air transport devices-Measurement of air flow with calibrated sensors close to or inside the ATD / pressure chambers
TS EN 14336 Heating systems - for buildings - Installation and commissioning of water-based heating systems
TS EN 14337 Heating systems for buildings Design and installation of direct electric room heating systems
TS EN 14366 Laboratory measurement of noise from wastewater plants "
TS EN 14367 Prevents uncontrollable backflow with different pressure zones - Family c, type a
TS EN 14518 Ventilation in buildings - Chilled beams - Tests and grading of cooled passive beams
TS EN 14623 Apparatus used to prevent contamination by backflow in potable water - Air gaps with minimum return flow (verified by measurement and test) - Family a, type g
TS EN 14743 + A1 Water conditioning equipment used in buildings - Softeners - Performance, safety and test rules
TSE CEN TR 14788: 2006 Ventilation in buildings - Design and dimensioning of residential ventilation systems
TS EN 14898 + A1 Indoor water conditioning equipment - Active material filters - Performance safety and test rules
TS EN 14908-5 Open data communication for building automation, controls and construction management - Control network protocol - Part 5: Application
TS EN 14908-6: 2010 Open data communication for building automation, controls and construction management - Control network protocol - Part 6: Application elements
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 15001-2 Gas systems - Gas piping for industrial installations larger than 0,5 bar and for industrial and other installations larger than 5 bar - Part 2: Detailed functional specifications for commissioning, operation and maintenance
TS EN 15036-2 Test rules for airborne noise emissions from heating boilers - Heat generators section 2: Flue gas noise emissions at the output of heat generators
TS EN 15092 Valves used in buildings - Inline hot water supply valves - Tests and rules
TS EN 15096 Devices to prevent pollution by drinking water backflow - Hose union anti-Vacuum valves - Dn 15 dn Family including H, type b and d 25 - General technical specifications
TS EN 15116 Ventilation in buildings - Chilled signals - Test and degree of active chilled beams
TS EN 15161 Indoor water treatment - Installation, operation, maintenance and repair
TS EN 15200 Sanitary wares - Multifunctional shower enclosures
TS EN 15200 / AC Sanitary wares - Multifunctional shower enclosures
TS EN 15219 + A1 Indoor water supply - Nitrate removal - Requirements for performance, safety and testing
TS EN 15240 Ventilation - Guidelines for the inspection of energy performance air conditioning systems for buildings
tst EN 15241 Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
TS EN 15242 Calculation methods for determination of air flow in buildings (including filtering) for ventilation buildings
TS EN 15243 Room temperatures, load and energy calculation for buildings with ventilation room conditioning system for buildings
TS EN 15251 Indoor environment parameters for the design and evaluation of energy performance of buildings (indoor air quality, thermal environment, lighting and acoustics)
TS EN 15255 Energy performance - For buildings - Precision room cooling load calculation - General criteria and validation procedures
TS EN 15265 Energy performance - For buildings - Calculation of the energy required for ambient heating and cooling using dynamic methods - General criteria and validation procedures
TS EN 15316-4-7 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-7: Space heat generation systems, biomass combustion systems
TS EN 15332 Boilers - Energy evaluation of hot water storage systems
TS EN 15378 Heating systems in buildings - Inspection of boilers and heating systems
TS EN 15389 Industrial valves - Performance characteristics of thermoplastic valves used as building products
TS EN 15423 Ventilation systems for buildings - Fire precautions for air distribution systems in buildings
TS EN 15456 Boilers - Heat generators - System limits - Electrical power consumption for measurements
TS EN 15459 Energy performance in buildings-Economic evaluation procedure for energy systems in buildings
TS EN 15553 Petroleum products and related materials-Determination of hydrocarbon types-Fluorescence marker adsorption method
TS EN 15636 Sanitary installation - Impact modified extruded acrylic sheets used in shower trays - Properties and determination methods
TS EN 15650 Ventilation and fire dampers in buildings
TS EN 15665 Ventilation in buildings - Determination of performance criteria for residential ventilation systems
TS EN 15720 Sanitaryware - Shower trays made of impact-resistant extruded abs / acrylic sheets - Specification and test methods
TS EN 15727 Ventilation in buildings - Ducts and duct network components, sealing classification and test
TS EN 15780: 2011 Ventilation-duct network for buildings- Cleaning of ventilation systems
TS EN 15805 Air filters - For particle filtration in general ventilation - Standardized dimensions
TS EN 15848 Water treatment equipment inside buildings - Chemical dosing system - Features for performance, safety and testing
TS EN ISO 15875-1 / A1 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 1: General -A1
TS EN ISO 15875-2 / A1 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 2: Pipes - A1
TS EN ISO 15877-5 Plastic pipe systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 5: suitability of the system for its purpose
TS EN ISO 21003-1 Multilayer pipe systems for indoor hot and cold water installations - Part 1: General
TS EN ISO 21003-3 Multilayer pipe systems for indoor hot and cold water installations - Part 3: Connections
TSE CEN ISO / TS 21003-7 Multilayer pipe systems for indoor hot and cold water installations - Part 7: Guidelines for conformity assessment
TS EN ISO 21003-2 Multilayer pipe systems for indoor hot and cold water installations - Part 2: Pipes
TS EN ISO 22391-5 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 5: Compliance with system purpose
TS EN ISO 22391-2 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 2: Pipes
TS EN ISO 22391-3 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 3: Fittings
TS EN ISO 22391-1 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 1: General
TS EN 24006 Flow measurement in closed pipes - Terms, descriptions and symbols
200233823 Water filters - Ceramic
tst EN 50165 / A1 Electrical equipment of non-electrical devices - used in households and similar places - Safety regulations
TS EN 50470-2 Electrical measuring equipment (aa) - Part 2: Special requirements - Electromechanical meters for active energy (class a and b)
TS EN 50470-3 Electrical measuring equipment (aa) - Part 3: Special requirements - Static meters for active energy (class a, b and c)
TS HD 60364-4-41 Low voltage electrical installations - part 4 - 41: Protection for safety - Protection against electric shock
TS HD 60364-4-42: 2011 Low voltage electrical installation -Part 4-42: Protection for safety -Protection against heat effects
TS HD 60364-5-51 Electrical installations in buildings - Part 5 - 51: Selection and installation of electrical equipment - Common rules
TS HD 60364-5-56 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment group 56: Security services
TS HD 60364-7-701: 2007 / AC: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces part 701: Places where bathtubs or showers are found "
TS HD 60364-7-701: 2007 / AC: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces part 701: Places where bathtubs or showers are found "
IEC 60364-5-53 Building electrical installations - Part 5: Selection and installation of electrical equipment - Group 53: Switching table and control table
TS HD 60364-4-43 Electrical installation in buildings - Part 4: Safety protection - Group 43: Overcurrent protection
TS IEC 60364-7-707 Electrical installation in buildings section 7: Rules for special installations or spaces part 707: Grounding rules for installation of computing equipment
TS HD 60364-4-444 Low voltage electrical installations - Part 4 - 44: Protection for safety -: protection against voltage and electromagnetic disturbances
TS HD 60364-5-54 Low voltage electrical installations - Part 5 - 54: Selection and installation of electrical equipment - Earthing arrangements and protective conductors
TS HD 60364-5-551 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment - Group 55: Other equipment - Part 551: Low voltage generator sets
TS HD 60364-7-701 Electrical installation in buildings part 7: Rules for special installations or spaces part 701: Places where bathtubs or shower trays are found
TS HD 60364-7-701 Electrical installation in buildings part 7: Rules for special installations or spaces part 701: Places where bathtubs or shower trays are found
TS HD 60364-7-702: 2010 Electrical installation in buildings section 7: Rules for special installations or spaces section 702 - Swimming pools and other pools
TS HD 60364-7-703 Electrical installation in buildings - Part 7-703: Rules for special installations or spaces - Rooms and cabins with sauna heaters
TS HD 60364-7-704 Low voltage electrical installations - Part 7-704: Rules for special facilities and sites - Construction and dismantling of construction sites
TS HD 60364-7-706 Low-voltage electrical installations - Part 7-706: Requirements for special installations and locations - Restricted movement conductor locations
TS HD 60364-7-708 Low voltage electrical installations - Part 7-708: Specifications for special installations or places - Electrical installations in caravan parks, camping parks and similar
TS HD 60364-7-709 Low voltage electrical installations - Part 7 - 709: Specification for special installations or locations - For marinas and similar
TS HD 60364-7-717 Electrical installations in buildings - Part 7.717: Rules for special installations or locations - Mobile or portable unit
TS HD 60364-7-721 Low voltage electrical installations - Part 7-721: Specifications for special installations or locations - Electrical installations in caravans and motorhomes
TS HD 60364-7-729 Electrical installation in buildings - Part 7-721: Special installations or areas - Special installations for operation or maintenance passageways
TS HD 60364-7-740 Low voltage electrical installations - Part 7-740: Specification for special installations or places - Structures, entertainment equipment and electrical installations for tents, amusement parks and circuses in the exhibition area
TS HD 60364-7-701: 2007 / A11: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces section 701: Bathrooms or shower trays
TS HD 60364-7-701: 2007 / A11: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces section 701: Bathrooms or shower trays
IEC 60364-4-481 Building electrical installations - Group 48: Selection of protection measures according to external influences - Part 481: Selection of protection measures against electrical impact associated with external influences
IEC 60364-5-548 Building electrical installations - Part 5: Selection and installation of electrical equipment - Part 548: Grounding arrangements and equipotential bonding in information technology installations
TS EN 60379 Household electric water heaters - Performance measurement methods
TS IEC 60364-7-713 Electrical installation in buildings - part 7: Rules for special installations and spaces - part 713: Furniture
TS EN 62053-31 Electrical measuring equipment (aa) - Special requirements - Section 31: Pulse output devices for electromechanical meters (two-wire only)
TS EN 62053-61 Electrical measuring equipment (aa) - Special requirements - Part 61: Power consumption and voltage requirements
TS EN 62055-31 Electricity meters - Payment systems - Part 31: Special requirements - Static payment meters for active energy (1 and 2 class)
TS EN 62059-31-1 Electrical measuring equipment - Dependency - Part 31-1: Accelerated reliability test - Increased temperature and humidity
TS EN 62059-41 Electrical measuring equipment - Dependency - Part 41: Reliability estimation
TS 13473 Concrete pipes and fittings - Dn 1750 larger than mm
TS 733 / T1 Thermosyphones - Solid fuel burning
TS 733 / T2 Thermosyphones - Solid fuel burning
TS 733 / T3 Thermosyphones - Solid fuel burning
tkt 200976033 Communication automation system with card communication