Central Heating Systems We provide auditing, testing and certification services to all standards related to regulations.
All of these standards are listed below.
TS 1107 Cantilever and clamps (for radiators)
TS 579 Valves and fittings (for radiators)
TS EN 835 Heat cost splitters are used to determine the heat consumption of the radiator -With the principle of evaporation without electrical energy supply
TS EN 12098-2 Control elements for heating systems - Part 2: Optimal start and stop control equipment for hot water heating systems
TS EN 12171 Heating systems - for buildings - Method for the preparation of documents for operation, maintenance and use - Heating systems without a trained operator
TS EN 12170 Heating systems - for buildings - Method for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator
TS EN 12170 Heating systems - for buildings - Processes for the preparation of operational, maintenance and use documents - Heating systems requiring trained personnel
TS EN 60335-2-51 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 215 Radiator valves - Thermostatic - Specifications and test methods
TS EN 303-3 / A2 Boilers - Part 3: Central heating boilers - Gas burning - System consisting of boiler body and forced draft burner
TS EN 14394 + A1 Boilers - Boilers with forced draft burners - Rated heat output does not exceed 10 MW and has a maximum operating temperature of 110 ºC
TS EN 13836 Boilers - Central heating boilers - Gas burning - Boilers type B with nominal heat input 300 kw - 1000 kw
TS EN 656 / A1 Boilers - Central heating boilers - Gas burning - Boilers type B with rated heat load 70 kw-300 kw
TS EN 303-3 / AC Boilers - Part 3: Central heating boilers - Gas fired - Consisting of boiler body and forced draft burner
TS EN 656 / A1 Boilers - Central heating boilers - Gas burning - Boilers type B with nominal heat load 70 kw - 300 kw
TS EN 303-7 Boilers - Part 7: Gas-fired central heating boilers with forced draft burners with rated heat output not exceeding 1000 kW
TS EN 303-7 Boilers - Part 7: Gas-fired central heating boilers with forced draft burners with rated heat output not exceeding 1000 kW
TS EN 13831 Closed expansion vessels with diaphragm for water installations
TS EN 15316-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Section 1: General
TS EN 15316-2-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 2: Space heating emission systems
TS EN 15316-4-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3: Heat generation systems, thermal solar systems
TS EN 15316-4-4 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 4: Heat generation systems, cogeneration systems integrated with buildings
TS EN 15316-4-5 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 5: Performance and quality of district heating production systems, district heating and large volume systems
TS EN 15316-4-6 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 6: Heat generation systems, photoltaic systems
TS EN 60335-2-106 Safety regulations - For electrical appliances used in households and similar places - Part 2-106: Particular requirements for heating units and heated carpets for room heating installed under removable floor covers
TS EN 15316-3-1 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-1: Domestic hot water systems-Determining requirements
TS EN 15316-3-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Section 3-2: Domestic hot water systems-Distribution system
TS EN 15316-3-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-3: Domestic hot water systems-Production
TS EN 15450 Heating systems in buildings-Design of heat pump heating systems
TS EN 60335-2-106 Safety regulations - For household and similar electrical appliances - Part 2-106: Particular requirements for heating units installed under heated carpets and removable floor coverings for heating the room
TS EN 60335-2-51 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 15316-2-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Section 2-3: Distribution systems for space heating
TS EN 15316-4-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 4-1: Heat generation systems for space heating, fuel combustion systems (boilers)
TS EN 15316-4-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 4-2: Heat generation systems for space heating, heat pumps
TS EN 13831 Closed expansion vessels with diaphragm for water installations
TS EN 13941 + A1 Central heating - Design, installation of pre-insulated bonded pipe systems
TS EN 15316-2-1 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 2-1: Heat dissipation systems for space heating
TS EN 15316-3-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-2: Residential hot water systems-Distribution
TS EN 15316-3-3 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 3-3: Residential hot water systems - Production
TS EN 15316-2-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 2-3: Distribution systems for space heating
TS EN 15316-4-1 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 1: Heat generation systems for space heating - Combustion systems (boilers)
TS EN 15316-4-2 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 2: Heat generation systems for space heating - Heat pump systems
TS EN 15316-4-3 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-3: Heat generation systems - Thermal solar energy systems
TS EN 15316-4-4 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 4: Heat generation systems - Cogeneration systems integrated with the building
TS EN 15316-4-5 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 5: Production systems for space heating - Performance and quality of district heating and large volume systems
TS EN 15316-4-6 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 4 - 6: Heat generation systems - Photovoltaic systems
TS EN 15316-4-7 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 7: Production systems for space heating - Biomass combustion systems
TS EN 1264-3 Surface-based water-based heating and cooling systems - Part 3: Sizing
TS EN 1264-4 Surface-based water-based heating and cooling systems - Part 4: Installation
TS EN 15378 Heating systems in buildings - Inspection of boilers and heating systems
TS EN 15316-4-8 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-8: Production systems for space heating, air heating and ceiling suspended radiant heating systems
TS EN 12809 / T1 Boilers for residential heating systems for houses - Single, solid fuel, rated heat output up to 50 kw - Features and test methods
TS EN 1264-1 Floor heating and cooling systems - Water-based - part 1: Definitions and symbols
TS EN 15316-4-8 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 4-8: Space heat generation systems, technical combustion systems
TS EN 15316-3-1 Heating systems for buildings - Method of calculating system efficiency and energy requirements of the system - Part 3-1: Residential hot water systems - Determination of requirements (hot water consumption conditions)
TS EN 60335-2-51: 2003 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water systems
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 303-5 Boilers - Part 5: Solid fuel boilers, manual and automatic loading, rated heat output up to 500 kW - Terms and definitions, requirements, tests and marking
TS EN 50379-3 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances Part 3: Performance requirements for devices used in the illegal service of gas-fired heating appliances
TS EN 50379-2 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances part 2: Performance requirements for legal examinations and assessment devices
TS EN 12828 + A1 Heating systems - Buildings - Design of water-operated heating systems
TS EN 50379-1: 2012 (EN) Specification for portable electrical apparatus designed to measure flue gas combustion parameters of heating devices - Part 1: General requirements and test methods
TS EN 303-5 Boilers-Section 5: Solid fuel boilers with manual and automatic loading, rated heat power up to 500 kw-Terms and recipes, specifications, tests and marking
1264-2: 2008 + A1: 2012 Floor-mounted hot-water heating systems part 2: Floor heating: Evidence methods for determination of thermal power using calculation and test
tst 2164 Heating installation design rules
TS EN 16313 Connections for heating and cooling applications-G ¾ A with external threaded pipe and taper-changeable connections
TS EN 303-2 / A1 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with spray fuel burners
TS EN 12098-1 Control unit for heating systems - Part 1: Control equipment for hot water heating systems
TS EN 834 Heat cost splitters-Radiators used to determine heat consumption-Powered by electrical energy
TS EN 12098-1 Control devices for heating systems - Part 1: External temperature controller for hot water heating systems
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
tst EN 834 Heat cost splitters-Radiators used in determining heat consumption -Working with electrical energy
TS EN 14394 + A1 Heating boilers with burner The main heat output does not exceed 10 mw and the highest operating temperature is 110 ° c
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 12828 + A1 Heating systems - Buildings - Design of water-operated heating systems
TS EN 442-2 Radiators and convectors-Section 2: Test methods and evaluation
TS EN 442-1 Radiators and convectors-Section 1: Technical specifications and rules
TS EN 16430-1 Fan-assisted radiators, convectors and shield convectors - Part 1: Technical specifications and requirements
TS EN 16430-2 Fan-assisted radiators, convectors and shield convectors - Part 2: Test method and evaluation for thermal power
TS EN 16430-3 Fan-assisted radiators, convectors and shield convectors - Part 3: Test method and evaluation for cooling capacity
TS EN 303-6 Boilers - Part 6: With forced draft burners - Basic features for the domestic hot water operation of combined boilers with atomized liquid fuel burners not exceeding the nominal heat input 70 kW
TS EN 304 / A1 Boilers - Test rules for liquid fuel injection burners
TS EN 304 / A2 Boilers - Test rules for liquid fuel injection burners
TS EN 14337 Heating systems for buildings - Design and installation of direct electric room heating systems
TS EN 15459 Energy performance in buildings-Economic evaluation procedure for energy systems in buildings
TS EN 442-1 Radiators and convectors-Section 1: Technical specifications and rules
TS EN 442-2 Radiators and convectors-Section 2: Test methods and evaluation
TS EN 303-1 / A1 Boilers - Part 1: Boilers with forced draft burners - Terms and definitions, general requirements, tests and marking
TS EN 15502-1 + A1 Gas-fired boilers - Part 1: General rules and tests
TS EN 834 / AC Heat cost splitters-Radiators used in determining heat consumption -Working with electrical energy
TS EN ISO 11855-2 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 2: Design heating determination and cooling capacity (ISO 11855-2: 2012)
TS EN ISO 11855-3 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3: 2012)
Building environment design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 11855: Dimensioning and calculation of dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 4-4: 11855)
TS EN ISO 11855-5 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5: 2012)
TS EN ISO 11855-1 Building environmental design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definitions, symbols and comfort criteria (ISO 11855-1: 2012)
tst 579 / T4 Valves and fittings (for radiators)
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
TS CWA 16975 Economically efficient intermediate stations for district heating
TS EN 14037-1 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºC - Part 1: Ceiling mounted radiant panels ready for ambient heating - Technical specifications and requirements
TS EN 14037-2 120 Ceiling-mounted irradiation panels with water supply below ° C - Part 2: Ceiling mounted radiant panels ready for ambient heating - Test method for thermal output
TS EN 14037-3 120 Ceiling-mounted irradiation panels with water supply below ° C - Part 3: Ceiling mounted radiant panels ready for ambient heating - Evaluation method and evaluation of radiant thermal output
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
TSE CLC / TS 50612 Portable electrical devices for measuring flue gas combustion parameters - Guidance for commissioning, service and maintenance of gas-fired central heaters
TSE CEN / EN 12098-6 Controllers for heating systems - Part 6: TR prEN 12098-1: accompanying 2015 - Modules M3-5,6,7,8
TSE CEN / TR 12098-7 Controls for heating systems - Part 7: TR prEN 12098-3: accompanying 2015 - Modules M3-5,6,7,8
TSE CEN / EN 12098-8 Controls for heating systems - Part 8: EN prEN 12098-5: accompanying 2015 - Modules M3-5,6,7,8
TS EN 14037-4 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºc - Part 4: Prefabricated ceiling-mounted radiant panels - Test method for cooling capacity
TS EN 14037-5 120 Ceiling-mounted radiation panels supplied with water below ° C Section 5: Open or closed heated ceiling surfaces - Test method for thermal output
TS EN 15502-2-1 + A1 Gas-fired central heating boilers - Part 2-1: Specific standards for Type C devices and devices of the type B1.000, B2 and B3 not exceeding 5 kW of nominal heat input
TS EN 15316-2-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 2: Space heating emission systems
TS EN 215 / T1 Radiator valves - Thermostatic - Features and test methods
TS EN 303-6 Boilers - Part 6: Forced hammer brol - Key features for the domestic hot water operation of combined boilers with atomized liquid fuel burner not exceeding the rated thermal input 70 kw
TS EN 303-1 / A1 Boilers boilers with forced draft burner - Part 1: Terms and definitions general features experiments and marking
TS EN 303-2 / A1 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with spray fuel burners
TS EN 304 / A1 Boilers - Test rules for liquid fuel injection burners
TS EN 304 / A2 Boilers - Test rules for liquid fuel injection burners
TS HD 384.7.753 S1 Building electrical installations - Part 7: Requirements for special installations and locations - Part 753: Floor and ceiling heating systems
TS 579 / T1 Valves and fittings (for radiators)
TS 579 / T2 Valves and fittings - Modified 2 used in heating systems
TS 579 / T3 Valves and fittings - used in heating systems
TS EN 15316-1 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 1: General
TS EN 1148 Heat exchangers - From water to water - Used in district heating - Tests for obtaining performance data
TS EN 1148 / A1 Heat exchangers - From water to water - Used in district heating - Tests for obtaining performance data
TS EN 1264-3 Floor heating - Systems and components - Part 3: Sizing
TS EN 1264-4 Floor heating - Systems and components - Part 4: Installation
TS EN 1264-5 Floor-mounted hot-water heating systems section 2: Floor and ceiling embedded heating and cooling surfaces - for determination of thermal power
TS 1499 Heating radiators
TS 2164 Heating installation design rules
TS 2164 / T1 Heating installation design rules
TS 2164 / T2 Heating installation design rules
TS 2164: 1983 / T3 Heating installation design rules
TS 2192 Heating installation rules
TS 2797 300 000 Rules for the design and installation of safety equipment in closed and open system hot water heating plants with thermostat safety leaving water temperature up to 110øc up to kcal / h
TS 3818 Heating systems - Design, installation and safety rules of gas central combustion plants
TS 3818 / T1 Heating systems - Design, installation and safety rules of gas central combustion plants
TS EN 4421 Heat reflectors and radiators (radiators and convectors) - Part 1: Technical specifications and rules
TS 9876 EN 303-4 Boilers-Section 4: Boilers with forced draft burners-Heat power 70 kw and maximum operating pressure 3 bar (0,3 mpa) boilers with forced draft liquid fuel burners-Terminology, special conditions, tests and markings
TS EN 12098-5 Controls for heating systems - Part 5: Start-stop timers for heating systems "
TS EN 12171 Heating systems - Preparation of documents for operation, maintenance and use of buildings - Heating systems without the need for trained personnel
TS 12514 Combined heating devices "combi" gas-fired, with atmospheric burner -Regulation heat power does not exceed 70 kw-Mounting rules
TS EN 12809 Boilers - For floor heating in residential buildings - Detached, solid fuel, rated heat output up to 50 kw - Specifications and test methods
TS EN 12809 / AC Boilers - Residential, individual, solid fuel for floor heating - Rated heat output up to 50 kw - Features and test methods
TS EN 12809 / A1 / AC Boilers - Residential, solid fuel for individual, floor heating - Rated heat output up to 50 kw - Specifications and test methods
TS EN 12831 Heating systems for buildings - Method for calculation and design of heat load
TS 13317 Portable and stationary liquefied petroleum gas (LPG) cylinders used in forklifts, filling rules and safety regulations for use
TS EN 14336 Heating systems - for buildings - Installation and commissioning of water-based heating systems
TS EN 14337 Heating systems for buildings Design and installation of direct electric room heating systems
TS EN 15036-2 Test rules for airborne noise emissions from heating boilers - Heat generators section 2: Flue gas noise emissions at the output of heat generators
TS EN 15316-4-7 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-7: Space heat generation systems, biomass combustion systems
TS EN 15456 Boilers - Heat generators - System limits - Electrical power consumption for measurements
TS EN 15459 Energy performance in buildings-Economic evaluation procedure for energy systems in buildings