We are responsible for all of the standards listed below, and all of them support testing, auditing and certification.
TS 3831 Symbols used in hot air heating, ventilation, air conditioning, control and installation
TS EN 810 Dehumidifiers - Electric powered compressor - Evaluation tests, marking characteristics and technical data
TS EN 12220 Ventilation - for buildings - Ducts - Dimensions of circular flanges for general ventilation
TS EN 13264 Ventilation of buildings - Floor mounted air passage grids - Structural classification tests
TS EN 13180 Ventilation for buildings - Ducts - dimensions and mechanical properties for flexible ducts
TS 3419 Ventilation and air conditioning plants - Design rules
TS EN 13264 Ventilation of buildings - Floor mounted terminal devices - Structural classification tests
TS EN 12238 Ventilation - Aerodynamic tests of ventilation end elements
TS EN 12239 Valves for buildings - Air connection devices - Aerodynamic test and declaration for displacement flow applications
TS EN 13410 Radiant heaters - Gas burning - Hanging on the ceiling - Ventilation rules for non-residential buildings
TS EN 13030 Ventilation-Terminals for buildings-Performance tests of simulated rain vents
TS EN 13180 Ventilation of buildings-Air ducts-Dimensions and mechanical properties for flexible ducts
TS EN 12236 Ventilation - for buildings - Air duct hanger and supports - Strength properties
TS EN 13183-2 Moisture content of lumber - Part 2: Estimation by electric resistance method
TS EN 13403 Ventilation in buildings - Non-metal ducts - Ducts made of duct insulation panels "
TS EN 12237 Ventilation in buildings - Duct network - Circular sheet metal ducts - Strength and tightness
TS EN 60335-2-88 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems
TS EN 13465 "Ventilation in buildings - Calculation methods for determination of air flow in residential buildings"
tst EN 13779 (Priority 1) Ventilation - Non-residential - Performance characteristics for ventilation and room air conditioning systems
tst 200559161 Hygienic air conditioning and ventilation in hospitals - Preparing projects, receiving (acceptance) and periodic maintenance of the system
TS EN 60335-2-88 Safety rules - For electrical appliances used in households and similar places - Section 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems
TS EN 12237 Ventilation in buildings-Duct network-Circular cross-section sheet metal air ducts-Strength and tightness
TS EN 12097 Ventilation for buildings - Ducts - Duct construction rules
TS EN 15240 Ventilation for buildings - Energy performance in buildings - Guidelines for the inspection of air conditioning systems
TS EN 15242 Ventilation for buildings - Calculation methods for determination of air flow in buildings (including uncontrolled leaks to buildings)
TS EN 15241 Ventilation - Calculation method for energy loss due to ventilation and filtration in commercial buildings for buildings
TS 12850 Authorized services - Ventilation and air conditioning systems - Air handling units, air conditioners, chillers, fan coils, fans (fans, ventilators), air purifiers and air curtains. - Rules
TS EN 60335-2-65 / A1 Safety regulations - For household electrical appliances and similar - Part 2-65: Particular requirements for air purification devices
tst 3419 Ventilation and air conditioning plants - Design rules
tst 3420 Rules for placing ventilation and air-conditioning systems
TS EN 13141-2 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 2: Exhaust and air supply terminal assembly
TS EN 15239 Ventilation for buildings - Energy performance in buildings - Guidelines for the inspection of ventilation systems
TS EN 13141-7 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 7: Performance tests of mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems designed for individual dwellings "
tst 496 The principles of natural ventilation of windows and bathrooms with chimneys
TS EN 15726 Ventilation for buildings - Air breathing - Measurements in the area covered by air-conditioned / ventilated rooms for the evaluation of thermal and acoustic conditions
Safety regulations - For household and similar electrical appliances - Part 7936-60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers
TS EN 15882-1 Comprehensive application of results from fire resistance tests in service facilities - Part 1: Channels
TS EN ISO 29462 Field tests of general ventilation filtration devices and systems on site with removal efficiency and resistance to air flow of particle size
TS EN ISO 10121-2 Test methods for the examination of gas phase air purifying media performance and apparatus for general ventilation - Part 2: Gas phase air purifiers (GPACD)
TSE K 196 Duct shelter ventilation device
tst EN 12238 Ventilation - Aerating end elements aerodynamic tests
TS EN 12102 Air conditioners - Heat pumps and dehumidifiers air-driven noise-driven compressor driven by electrical energy - Determination of sound power level
TS EN 15218 Liquid cooling packs and air conditioners with evaporative cooled condensers, electrical driven compressors for space cooling - Terms, recipes, test conditions, test methods and rules
TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods
TS EN 14825 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Assessment and test of seasonal performance under partial load conditions
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions
TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 4: Operating characteristics, marking and operating instructions
TS EN 14825 Electrically driven compressor air conditioners, liquid cooling packs and heat pumps for ambient heating and cooling - Test and partial load classification and calculation of seasonal performance
TS EN 13403 Ventilation in buildings - Non-metal ducts - Duct system made of insulated duct panels
TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions
TS EN 1751 Ventilation in buildings - Air terminal devices - Aerodynamic tests of dampers and valves
TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 4: Operating requirements, marking and operating instructions
TS EN 13141-8 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 8: Performance tests of ductless mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems designed for single room
TS EN 1751 Ventilation in buildings - Air terminal devices - Aerodynamic tests of dampers and valves
Safety regulations - for household and similar electrical appliances - part 7936- 60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers
TS EN 12309-3 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 3: Test conditions
TS EN 12309-4 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 4: Test methods
TS EN 12309-5 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 5: Requirements
TS EN 12309-6 Air-conditioning and / or heat pump devices-Gas burner-Absorbable and adsorbed-Net heat input up to 70 kw (including 70 kw)
TS EN 12309-7 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 7: Particular requirements for hybrid devices
TS EN 13141-6 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 6: Exhaust ventilation systems used in a single dwelling "
TS EN ISO 10121-1 Test method for the performance evaluation of air purifying agent and general ventilation devices in the gas phase
TS EN 15243 Room temperatures, load and energy calculation for buildings with ventilation room conditioning system for buildings
TS EN 12102 Air conditioners, liquid cooling packages, heat pumps and dehumidifiers driven by electric compressors for heating and cooling spaces - Measurement of airborne noise - Determination of sound power level
TS EN 14992 + A1 Precast concrete products - Wall elements
TS EN 12309-1 Air-conditioning and / or heat pump devices-Gas burner-Absorption and adsorption-Net heat input up to 70 kw (including 70 kw) -Chapter 1: Terms and definitions
prEN 16798-5-1 -
TS EN ISO 15957 Test powders for the evaluation of air cleaning equipment (ISO 15957: 2015)
TS EN 13141-11 Ventilation for buildings - Performance testing of components / products for residential ventilation - Part 11: Supply ventilation units
TS EN 16211 Ventilation for buildings - Air Measurement sites - Methods
TS EN ISO 11855-2 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 2: Design heating determination and cooling capacity (ISO 11855-2: 2012)
TS EN ISO 11855-3 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3: 2012)
Building environment design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 11855: Dimensioning and calculation of dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 4-4: 11855)
TS EN ISO 11855-5 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5: 2012)
TS EN ISO 11855-1 Building environmental design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definitions, symbols and comfort criteria (ISO 11855-1: 2012)
TS EN 15650 Ventilation and fire dampers in buildings
TS EN ISO 16170 Test methods for filter systems in case of very high efficiency for industrial plants
TS EN ISO 15858 UV-C Devices - Safety information - Allowed human exposure
tst 2017114849 Duct Type Shelter Ventilation Device
TS EN 13053 + A1 Ventilation of buildings-Air transport units-Performance and proportions of units, components and parts
TS EN ISO 16890-1 Air filters for general ventilation - Part 1: technical specifications, requirements and classification system based on particulate matter efficiency (ePM) (ISO 16890-1: 2016)
TS EN ISO 16890-2 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2: 2016)
TS EN ISO 16890-3 Air filters for general ventilation - Part 3: Determination of gravimetric efficiency and airflow resistance to the mass of captured test dust (ISO 16890-3: 2016)
TS EN ISO 16890-4 Air filters for general ventilation - Part 4: Conditioning method for determining minimum fractional test efficiency (ISO 16890-4: 2016)
TSE K 542 Ventilation components - Buildings - End elements - Grids, diffusers (anemostads), shutters - Features and tests
TSE K 540 Ventilation units - In buildings - Cell - Aspirators - Ventilators - Specifications and Tests
TSE K 541 Ventilation - air dampers in buildings
TSE K 543 Metal flange profiles - Used in air ducts - Features and tests
TSE K 538 Ventilation - Mufflers used in air ducts in buildings - Features and tests
TSE K 536 Ventilation units - Metallic and synthetic filters used in buildings - Features and tests
TSE K 537 Control covers - Used in air ducts - Features and tests
TS EN 16573 Ventilation for buildings - Performance testing of components of residential buildings - Multifunctional balanced ventilation units for single-family dwellings, including heat pumps
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS 496 Principles of natural ventilation of windows and bathrooms with chimneys
TS EN 1505 Ventilation in buildings-Made of sheet metal-Rectangular cross-section air ducts and fittings-Dimensions
TS EN 1506 Ventilation in buildings-Channel network-Circular cross-section sheet metal air ducts-Fasteners-Dimensions
TS EN 1507 Ventilation in buildings-Duct network-Rectangular cross-section sheet metal air ducts-Strength and tightness-Features and tests
TS CR 1752 Ventilation - Design rules for indoor environments for buildings
TS EN 1886 Mechanical performance of air-conditioning units in buildings
200977002 Hygienic air conditioning and ventilation project preparation, delivery and periodic maintenance in hospitals
TS 2878 ISO 3258 Air distribution and air diffusion - Terms
TS 3419 / T1 Ventilation and air conditioning plants - Design rules
TS 3420 Rules for installation of ventilation and air conditioning facilities
TS 3541 Rules for the application of thermal insulation material from mineral fibers to heating and ventilation installations
TS EN ISO 5135 Acoustics - Measurement of noise power levels in ventilation rooms, units, dampers and valves
TS 5895 Rules for the operation and maintenance of central air conditioning and ventilation plants
TS 7817 Air purge device (automatic)
tst EN 12097 Ventilation for buildings - Ducts - Duct construction rules
TS EN 12589 Ventilation of buildings-Air terminal units aerodynamic experiments and the ratio of fixed and variable speed terminal units
TS EN 13053: 2006 + A1: 2011 (EN) Ventilation of buildings-Air transport units-Performance and proportions of units, components and parts
TS EN 13141-1 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 1: external and internally mounted air transfer system "
TS EN 13141-3 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 3: aspirators for domestic use "
TS EN 13141-5 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 5: hoods and roof outlet terminal unit "
TS EN 13141-10 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 10: Humidity controlled filtered air end elements
TS EN 13141-9 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 9: Externally installed moisture controlled air conduction elements
TS EN 13141-4: 2011 (EN) Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 4: fans used in residential ventilation systems "
TS EN 13182 + AC Ventilation of buildings - Device features for measuring air velocity in ventilating volume
TS EN 13410 / AC Radiant heaters - Gas burning - Hanging on the ceiling - Ventilation rules for non-residential buildings
TS EN 13465 Ventilation for buildings - Calculation methods for determination of air flow in residential buildings
TS EN 14134 Ventilation in buildings - Performance tests and installation controls of residential ventilation systems
tst EN 14277 Ventilation of buildings - Air terminal devices - Air flow measuring method with calibrated sensors in or near ATD boxes
TS EN 14239 Ventilation of buildings - Duct - Measurement of duct surface area
TS EN 14240 Ventilation in buildings - Refrigerated ceilings - Tests and ratings "
TS EN 14277 Ventilation-for-buildings-Air transport devices-Measurement of air flow with calibrated sensors close to or inside the ATD / pressure chambers
TS EN 14518 Ventilation in buildings - Chilled beams - Tests and grading of cooled passive beams
TSE CEN TR 14788: 2006 Ventilation in buildings - Design and dimensioning of residential ventilation systems
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 15116 Ventilation in buildings - Chilled signals - Test and degree of active chilled beams
TS EN 15240 Ventilation - Guidelines for the inspection of energy performance air conditioning systems for buildings
tst EN 15241 Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
TS EN 15242 Calculation methods for determination of air flow in buildings (including filtering) for ventilation buildings
TS EN 15243 Room temperatures, load and energy calculation for buildings with ventilation room conditioning system for buildings
TS EN 15423 Ventilation systems for buildings - Fire precautions for air distribution systems in buildings
TS EN 15650 Ventilation and fire dampers in buildings
TS EN 15665 Ventilation in buildings - Determination of performance criteria for residential ventilation systems
TS EN 15727 Ventilation in buildings - Ducts and duct network components, sealing classification and test
TS EN 15780: 2011 Ventilation-duct network for buildings- Cleaning of ventilation systems
TS EN 15805 Air filters - For particle filtration in general ventilation - Standardized dimensions
TS 5827 Natural gas pressure regulation rules for indoor installations (inlet pressure max 25 mbar)
TS 6355 Natural gas meters - Connection heads with one connection
TS 455 Gas meters (with bellows)
TS 10876 Mechanical volume correctors - for gas meters
TS 10910 Sealing sheets - Rubber - Cork and tire - Cork - Asbestos based - Used in gas fittings and appliances
TS EN 751-3 Sealing materials - 1 th, 2 and 3 are used for screw metallic connections in contact with all gases and hot water - Part 3: Non-sintered ptfe strips
TS EN 751-2 Sealing materials - 1 th, 2 th and 3 are used for screw metallic connections in contact with hot gases and hot water - Part 2: Non-hardening gasket compounds
TS EN 751-1 Sealing materials-1 th, 2 th and 3 third family used for screw metallic connections in contact with gases and hot water-Part 1: Air-hardening seal compounds
TS EN 12279 Gas supply systems - Pressure regulating systems on service lines - Functional requirements
TS EN 12261 / AC Gas meters-Turbine meters
TS EN 15069 Gas connection safety valves - for metal hoses - for indoor use - for connection of gas appliances
TS EN 15069 Gas safety valves - For metal hose assemblies - For indoor use - For connection of gas appliances
TS EN 437 + A1 Test gases - Test pressures - Device categories
TS EN 437 + A1 Test gases - Test pressures - Device categories
TS EN 777-3 Heating systems - Radiant tube - Gas burner - Multi burner - Ceiling mounted for outdoor use - Part 3: System f- Safety
TS EN 777-2 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 2: System e-Safety
TS EN 777-1 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 1: System d - Safety
TS EN 777-4 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 4: System h - Safety
TS EN 416-1 Heaters - Gas burner - Radiant tube - For outdoor use - Single burner - Ceiling mounted - Part 1: Safety
TS EN 12405-1 + A2 Gas meters - Conversion devices - Part 1: Volume converter
TS EN 777-2 Heating systems - Radiant tube - Gas burning - Multi-burner - Ceiling mounted - For outdoor use - Part 2: System e - Safety
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN 1555-2 Plastic piping systems - Used for the transport of gas fuels - Polyethylene (pe) - Part 2: Pipes
TS EN 1555-5 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene - Part 5: suitability of the system for its purpose
TS EN 777-4 Heating systems - Radiant tube - Gas burning - Multi-burner - Ceiling mounted - For outdoor use - Part 4: System h - Safety
TS EN 777-3 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 3: System f - Safety
TS EN 777-1 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 1: System d - Safety
TS 7363 Natural gas - Building indoor installation design and application rules
TS EN 1555-5 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene (PE) - Part 5: suitability of the system for its purpose
TS EN 1555-4 Plastic piping systems - For the transport of gas fuels - Polyethylene (PE) - Part 4: Valves
TS EN 12405-2 Gas meters - Conversion devices - Part 2: Energy converter
TS EN 12327 Gas supply systems - Pressure test, commissioning and decommissioning - Functional requirements
TS EN 12405-2 Gas meters - Conversion devices - Part 2: Energy converter
TSE CEN / TS 1555-7 Plastic pipe systems - For the transport of gas fuels - Made of polyethylene (pe) - Part 7: Conformity assessment guide
TSE CEN / TR 1749 European program for the classification of gas appliances by the discharge method of combustion products (types)
TS EN 416-1 Heaters - Gas burning - Radiant tube - For outdoor use - Single burner - Ceiling mounted - Part 1: Safety
TS EN 16314 Gas meters - Additional features
TS 2170 Underground installation of water and gas pipes
TSE K 268 Hydrocyclone
TSE K 270 Gravel Filter
TSE K 281 Hydraulic automatic filter
TSE CEN / TR 1749 European program for the classification of gas devices according to the discharge method of combustion products (types)
TSE CEN / TR 16787 Industrial Gas Installation - Manual
TSE CEN / EN 13737-2 Gas infrastructure - Application guide for functional standards prepared by CEN / TC 234 - Part 2: National pages of CEN / TC 234 standards
tst EN 14459 Control functions in electronic systems for gas burners and gas burners - Methods for classification and evaluation
TS EN 14459 Control functions in electronic systems for gas burners and gas burners - Methods for classification and evaluation
TS EN 12480 Gas meters - Rotary displacement gas meters
TS EN 12480 Gas meters - Rotary displacement gas meters
TSE K 376 Steel Insulator Pipe Fittings
TS EN 12327 Gas supply systems - Pressure test, commissioning and decommissioning - Functional requirements
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 1: General
TS 10276 Filters - Used in internal gas installations
TS 10880 Expansion Joints - Steel bellows - Used in gas pipelines and installations
TS EN 12405-3 Gas meters - Conversion devices - Part 2: computer flow
TSE CEN / TR 16940 Domestic gas installations - Safety recommendations
TS EN 16830 Safety and control devices for gas and liquid fuel burners and appliances - Control functions in electronic systems - Temperature control function
tst 6356 Natural gas meters - Two connection connection heads
TS 7363 Natural gas - Building indoor installation design and application rules
TS EN 1359 Gas meters with diaphragm
TS 455 / T1 Gas meters (with bellows)
TS 1120 Rules for the installation of gas and electricity meters
TS 1176 Design and application principles of gas installation in buildings
TS EN 1555-4 Plastic piping systems for the transport of gas fuels from polyethylene (pe) - Part 4: Valves
TS EN 1775 Gas supply - Gas piping for buildings - Functional recommendations with maximum operating pressure 5 bar and below
TS 3418 Measurement of fluid flow in pipes terms and symbols
TS 6356 Natural gas meters - Connection heads with two connections
TS 6356 / T1 Natural gas meters - Connection heads with two connections
TS 6356 / T2 Natural gas meters - Connection heads with two connections
TS 6356 / T3 Natural gas meters - Two connection connection heads modified 3
TS 6356 / T4 Natural gas meters - Connection heads with two connections
TSE EEC / 71 / 318: Council regulation 2001 on the approximation of the laws of the member states relating to gas meters, 26 july 1971 date and 71 / 318 / at (82 / 623 / at, 78 / 365 / at, 74 / at, 331 amended by the commission regulations)
TSE / TS 8038 Liquefied petroleum gases (lpg) - Guide for odorizing gases
TS 11425 Insulation fittings-ready for installation for electrical insulation in building gas and water service lines
TS 5477 EN 12261 / A1 Gas meters - Turbine meters
TS EN 12279 Gas supply systems - Gas pressure regulating equipment on service lines - Functional specifications
TS EN 12279 / A1 Gas supply systems - Gas pressure regulating equipment on service lines - Functional features
TS EN 13090 Gas pipe fitting - Seals for screw connections
TS EN 14236 Ultrasonic household gas meters
TS EN 15001-2 Gas systems - Gas piping for industrial installations larger than 0,5 bar and for industrial and other installations larger than 5 bar - Part 2: Detailed functional specifications for commissioning, operation and maintenance
TS EN 15553 Petroleum products and related materials-Determination of hydrocarbon types-Fluorescence marker adsorption method