Ensuring controls and carrying out inspections related to Bridges, Buildings and other structures are carried out in accordance with the following standards. We provide testing, auditing and certification services for all of the following standards.
TS 3831 Symbols used in hot air heating, ventilation, air conditioning, control and installation
TS 5800 General safety rules for gas-fired heating appliances used in homes and similar places
TS 5827 Natural gas pressure regulation rules for indoor installations (inlet pressure max 25 mbar)
TS 1107 Cantilever and clamps (for radiators)
TS 6355 Natural gas meters - Connection heads with one connection
TS 455 Gas meters (with bellows)
TS 579 Valves and fittings (for radiators)
TS 9336 Construction and excavation machinery - operating equipment
TS 3538 Plastic fittings (for plumbing)
TS 10825 Construction machines-Vibrating sieves
TS 10876 Mechanical volume correctors - for gas meters
TS 10910 Sealing sheets - Rubber - Cork and tire - Cork - Asbestos based - Used in gas fittings and appliances
TS 10825 Construction machines-Vibrating sieves
TS 10876 Mechanical volume correctors - for gas meters
TS 10910 Sealing sheets - Rubber - Cork and tire - Cork - Asbestos based - Used in gas fittings and appliances
TS EN 29052-1 Acoustic-Determination of dynamic stiffness-Section1 materials used under residential flexible flooring
TS EN 29048 Joint materials used in building construction - Determination of the gushing ability of the sealing material using standardized devices
TS ISO 7976-2 Building tolerances-Measurement methods of buildings and elements used in building 2: Position of measuring points
TS 12096 Water Heaters (instantaneous water heaters) with gas atmospheric burners - Rules for installation and use
TS EN 627 Rules for recording and monitoring data for elevators, escalators and escalators
TS EN 835 Heat cost splitters are used to determine the heat consumption of the radiator -With the principle of evaporation without electrical energy supply
TS 5228-2 EN 234 Wall coverings in rolls
TS 5228-4 EN 266 Wall coverings-In rolls -Features of textile wall coverings
TS EN 932-1 Tests for general properties of aggregates-Part 1 sampling methods
TS prEN 1531 modulating gas valves-including start gas valves
TS IEC 245-5 Cables - Rubber insulated - Part with rated voltage up to 450 / 750 v 5: Elevator cables
Tests for general properties of aggregates 10088: Process and terminology for simplified petrographic identification
TS 1902 EN 588-1 Fiber cement pipes-Section for sewerage and drainage 1: Non-pressure pipes, joint fittings, joint special fittings
TS EN 501 Roofing sheets-Metal-Fitting on the roof-Made of zinc plate-Features
TS EN 991 Gas concrete or lightweight aggregate porous concrete - Determination of pre-structured components
TS EN 524-1 Steel strip sheaths - Test methods for prestressed reinforcement - Part 1: Determination of shape and dimensions
TS EN 524-2 Steel strip sheaths - Test methods for prestressed reinforcement part 2: Determination of bending behavior
TS EN 524-5 Steel strip sheaths - Test methods for prestressed reinforcement - Part 5: Determination of resistance to tensile load
TS EN 810 Dehumidifiers - Electric powered compressor - Evaluation tests, marking characteristics and technical data
TS EN 1155 Building equipment - Electrically driven open holding devices for automatic two-way doors - Requirements and test methods
TS EN 1521 Determination of tensile strength of bending of lightweight aggregate porous concrete
TS EN ISO 11654 Acoustics - Sound absorbers used in buildings - Grading of sound absorption
TS EN 1351 Determination of tensile strength in bending of aerated concrete
TS EN 1355 Gas concrete or lightweight aggregate porous concrete - Determination of creep under pressure
TS EN 751-3 Sealing materials - 1 th, 2 and 3 are used for screw metallic connections in contact with all gases and hot water - Part 3: Non-sintered ptfe strips
TS EN 751-3 Sealing materials - 1 th, 2 and 3 are used for screw metallic connections in contact with all gases and hot water - Part 3: Non-sintered ptfe strips
TS EN 751-2 Sealing materials - 1 th, 2 th and 3 are used for screw metallic connections in contact with hot gases and hot water - Part 2: Non-hardening gasket compounds
TS EN 751-1 Sealing materials-1 th, 2 th and 3 third family used for screw metallic connections in contact with gases and hot water-Part 1: Air-hardening seal compounds
TS EN 751-1 Sealing materials-1 th, 2 th and 3 third family used for screw metallic connections in contact with gases and hot water-Part 1: Air-hardening seal compounds
TS IEC / EN 60364-2-21 Electrical installation in buildings-Section 2: Definitions-Subsection 21-Guide to general terms
TS EN 1170-6 Prefabricated concrete products-Glass fiber reinforced cement (CTT) test method-Part 6: Determination of water absorption and dry density by immersion in water
TS EN 932-2 Tests for general properties of aggregates part 2: Method of reduction of laboratory samples
TS EN 1337-11 Structural bearings - Part 11: Transport, storage and assembly
TS EN 772-3 Masonry units - Test methods - Part 3: Determination of net volume and percentage of cavity in water by weighing method
TS EN 772-4 Masonry units - Test methods - Part 4: Determination of the total and apparent porosity of natural stone masonry units and the volume volume of void and void volume
TS EN 772-9 Masonry units - Test methods - Part 9: Determination of the void volume and percentage and net volumes of lime sandstone masonry units by sand filling method
TS EN 1522 Window, door, roller shutter, roller shutter - Bullet resistance - Properties and classification
TS EN 933-7 Tests for geometric properties of aggregates - Part 7: Determination of shell content in coarse aggregates - Percentage of shell
TS EN 1015-2 Masonry mortar - Test methods - Part 2: Sampling from mortar stacks used in manufacturing and preparation for testing
TS EN 1015-6 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar
TS EN 1015-19 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar
TS EN 1065 Adjustable telescopic steel posts - Product specification, design, calculation and test evaluation
TS EN 1111 Sanitary fittings - Thermostatic mixing valves (pn 10) - General technical specifications
TS EN 1737 Prefabricated components made of aerated concrete and lightweight aggregate porous concrete - Determination of shear strength at welded joints of mesh and mesh reinforcement
TS EN 1741 Prefabricated components made of aerated concrete or lightweight aggregate porous concrete - Determination of shear strength against out-of-plane forces in joints between components
TS EN 1770 Concrete structures - Products and systems for protection and repair - Test methods - Determination of heat expansion coefficient
TS EN 1933 External awnings - Resistance to water flow load - Test method
TS EN ISO 12944-3 Paints and varnishes - Steels - Corrosion protection of steel structures by protective paint systems - Part 3: Design
TS EN ISO 12944-8 Paints and varnishes - Steels - Corrosion protection of steel structures by protective paint systems - Part 8: Development of features for new operation and maintenance
TS EN 538 Roof tiles made of clay discontinuous bending strength test
TS EN 1015-11 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar
TS EN 1015-9 Masonry mortar - Test methods - Part 9: Determination of the processing and correcting time of fresh mortar
TS EN 1169 Prefabricated concrete products - General rules for factory production control of glass fiber reinforced cements
TS EN 1192 Doors - Classification according to strength properties
TS EN 12046-2 Operating forces - Test methods - Part: 2 doors
TS EN 12051 Building hardware - Door and window bolts - Tests and methods "
TS EN 12154 Curtain walls - Water impermeability - Performance requirements and classification
TS EN 12189 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the processing time of the adhesives used in the structure
TS EN 12208 Doors and windows - Waterproofing - Classification
TS EN 12219 Doors - Climate effects - Characteristics and classification
TS EN 1453-1 Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 1 - Pipes and system features
TS EN 1455-1 Plastic pipe systems - Used for the disposal of indoor wastewater (hot and cold) - Acrylonitrile - Butadiene - Styrene (abs) - Part 1: Pipes, fittings and system features
TS EN 1529 Door leaves - Height, width, square - Rules for granting tolerance
TS EN 1542 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adhesion strength by pulling method
TS EN 1542 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adhesion strength by pulling method
TS EN 1849-1 Flexible sheets for waterproofing - Determination of thickness and unit area mass - Part 1: Bituminous sheets for roof waterproofing
TS EN 1850-1 Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bituminous sheets for roof waterproofing
TS EN 1925 Natural stones - Test methods - Determination of water absorption coefficient due to capillary effect
TS EN 1946-1 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties section 1: General criteria
TS EN 1946-1 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties section 1: General criteria
TS EN 1946-2 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 2: Enclosed hot plate method
TS EN 1946-2 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 2: Enclosed hot plate method
TS EN 1946-3 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurement using heat flow meter method
TS EN 1946-3 Thermal performance of building materials and products-Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurement using heat flow meter method
TS EN 504 Roofing sheets - Metal - Fits all - Copper sheets -
TS EN 846-10 Masonry - Auxiliary components - Test methods - Part 10: Load capacity and load-displacement properties of cantilever holders
TS EN 846-10 Masonry - Auxiliary components - Test methods - Part 10: Load capacity and load-displacement properties of cantilever holders
TS EN 846-3 Masonry - Auxiliary components - Test methods - Part 3: Determination of the shear load capacity of pre-welded horizontal joint reinforcement welds
TS EN 846-3 Masonry - Auxiliary components - Test methods - Part 3: Determination of the shear load capacity of pre-welded horizontal joint reinforcement welds
TS EN ISO 10545-2 Ceramic tiles section 2: Determination of size and surface quality
TS EN ISO 10545-3 Ceramic tiles section 3: Determination of water absorption, apparent porosity, apparent relative density and volume mass
TS EN ISO 10545-10 Ceramic tiles section 10: Determination of moisture expansion
TS EN 303-1 Boilers boilers with forced traction burner - Part 1: Terms and definitions general specifications experiments and marking
TS EN 1121 Doors - Working in two separate environments - Test method
TS EN 12056-3 Drainage systems - Indoor - Part 3: Design and calculation of terrace drainage
TS EN 12056-3 Drainage systems - Indoor - Part 3: Design and calculation of terrace drainage
TS EN 12155 Curtain walls - Waterproofing - Laboratory tests under static pressure
TS EN 12279 Gas supply systems - Pressure regulating systems on service lines - Functional requirements
TS EN 12310-2 Flexible sheets for waterproofing - Determination of tear resistance - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 12310-2 Flexible sheets for waterproofing - Determination of tear resistance - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 12354-1 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 1: Insulation of airborne noise between rooms
TS EN 12354-2 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 2: Insulation of impact sound between rooms
TS EN 12354-4 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 4: Transmission of sound inside
TS EN 12390-4 Concrete - Hardened concrete tests - Part 4: Compressive strength - Characteristics of test machines
TS EN 12489 Doors - Industrial, commercial and garage doors - Resistance to water penetration - Test method
TS EN 12489 Doors - Industrial, commercial and garage doors - Resistance to water penetration - Test method
TS EN 12604 Doors - Industrial, commercial and garage doors - Mechanical aspects - Specifications
TS EN 12604 Doors - Industrial, commercial and garage doors - Mechanical aspects - Specifications
TS EN 12605 Doors - Industrial, commercial and garage doors - Mechanical aspects - Test methods
TS EN 12605 Doors - Industrial, commercial and garage doors - Mechanical aspects - Test methods
TS EN 1337-1 Structure of bearings - Part 1: General design rules
TS EN 1337-1 Structure of bearings - Part 1: General design rules
TS EN 1877-1 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 1: Determination of epoxy equivalents
TS EN 1877-1 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 1: Determination of epoxy equivalents
TS EN 1877-2 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 2: Determination of amine functions using the total number of bases
TS EN 1877-2 Concrete structures - Protection and repair products and systems - Test methods - Reactive functions of epoxy resins section 2: Determination of amine functions using the total number of bases
TS EN 1946-4 Thermal performance of building materials and components - Specific criteria for the evaluation of laboratories where heat transfer properties are measured - Part 4: Measurements with hot box methods
TS EN 1946-4 Thermal performance of building materials and components - Specific criteria for the evaluation of laboratories where heat transfer properties are measured - Part 4: Measurements with hot box methods
TS EN 772-13 Heavy units - Test methods - Part 13: Determination of net and gross dry unit volume masses of masonry units (excluding natural stone)
TS EN 772-15 Masonry units - Test methods - Part 15: Determination of water vapor permeability in aerated concrete masonry units
TS EN 12056-4 Drainage systems - Indoor - Part 4: Design and calculation of waste water pumping stations
TS EN 12056-4 Drainage systems - Indoor - Part 4: Design and calculation of waste water pumping stations
TS EN 1993-1-1 Design of steel structures - Part 1-1: General rules and rules to be applied to buildings (Eurocode 3) TS EN 1993-1-1 Design of steel structures - Part 1-1: General rules and rules 3)
TS EN 1998-3 Design of earthquake resistant structures - Part 3: Evaluation and strengthening of buildings (Eurocode 8)
TS EN 12154 Curtain walls - Waterproofing - Performance requirements and classification
TS EN 12219 Doors - Climate effects - Features and classification
TS EN 12605 Doors - Used in industrial and commercial buildings and garages - Mechanical aspects - Test methods
TS EN 12152 Curtain walls - Air permeability - Performance requirements and classification
TS EN 13051 Curtain walls - Water tightness - On-site testing
TS EN 1992-1-1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 1992-1-1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN ISO 12944-3 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design criteria
TS EN ISO 12944-8 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 8: Specification for new application and maintenance
TS 5694 EN 12670 Natural stones - Terms and definitions
TS EN 13364 Natural stones-Test methods-Determination of the breaking load in the stud hole
TS EN 12220 Ventilation - for buildings - Ducts - Dimensions of circular flanges for general ventilation
TS EN 806-1 Indoor installation - Specification for the transport of drinking and potable water - Part 1: General
TS EN 806-2 Indoor installation - Specification for the transport of drinking and potable water - Part 2: Design
TS EN 806-3 Indoor installation - Features for the transport of potable and domestic water -Part 3: Pipe dimensioning - Simplified method
TS EN 1074-1 Valves - For water supply - Compliance and verification tests with intended requirements - Part 1: General specifications
TS EN 1155 Building equipment - Electrically driven open holding devices for automatic two-way doors - Requirements and test methods
TS EN 12354-4 Building acoustics - Calculation of the acoustic performance of buildings from the performance of the elements - Part 4: Transmission of internal sound to the outside
TS EN 12354-1 Building acoustics - Calculation of the acoustic performance of buildings from the performance of elements - Part 1: Insulation of airborne noise between rooms
TS EN 12354-2 Building acoustics - Calculation of the acoustic performance of buildings from the performance of elements - Part 2: Insulation of impact noise between rooms
TS EN 1946-3 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurements by heat flow meter method
TS EN 1946-3 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties Part 3: Measurements by heat flow meter method
TS EN 12833 Roof windows and rotating shutters: Resistance to snow load - Test method
TS EN 12833 Roof windows and rotating shutters: Resistance to snow load - Test method
TS EN 13264 Ventilation of buildings - Floor mounted air passage grids - Structural classification tests
TS EN ISO 10534-1 Acoustic- Sound absorption coefficient and impedance determination in impedance pipes - Part 1: Method of using the standing wave ratio
TS EN 13180 Ventilation for buildings - Ducts - dimensions and mechanical properties for flexible ducts
TS EN 1991-1-2 Effects on structures - Part 1-2: General effects - Effects on structures exposed to fire (eurocode 1)
TS ISO 4736 Fire tests - Small chimneys - Test at elevated temperatures
TS 3419 Ventilation and air conditioning plants - Design rules
TS EN 12833 Roller shutters for conservatories and lightings - Resistance to snow loads - Test methods
TS EN 12865 Hygothermal performance of building components and building elements - Determination of the resistance of all exterior wall systems to heavy rain under air pressure
TS EN 13115 Windows - Classification of mechanical properties - Tensile, torsional and operating forces
TS EN 13116 Curtain walls - Wind load resistance - Performance rules
TS EN 13123-1 Windows, doors and shutters - Explosion resistance - Properties and classification - Part 1: Impact tunnel
TS EN 13124-1 Windows, doors and shutters - Explosion resistance - Test method - Part 1: Impact tunnel
TS EN 13125 Shutters and blinds - Additional thermal resistance - Determination of finished air permeability class
TS EN 13213 Hollow slabs
TS EN 13264 Ventilation of buildings - Floor mounted terminal devices - Structural classification tests
TS EN 1844 Flexible sheets for waterproofing - Determination of ozone resistance - Plastic and rubber sheets for waterproofing on roofs
TS EN 1848-2 Flexible sheets for waterproofing - Determination of length, width and smoothness - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 1850-2 Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS HD 308 S2 Introduction of cores in cables and flexible cords
TS EN 495-5 Flexible sheets for waterproofing - Determination of low temperature foldability - Part 5: Plastic and rubber sheets for waterproofing on roofs
TS EN 495-5 Flexible sheets for waterproofing - Determination of low temperature foldability - Part 5: Plastic and rubber sheets for waterproofing on roofs
TS EN ISO 3822-3 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 846-13 Masonry - Auxiliary components - Part 13: Determination of resistance to impact, wear and corrosion of organic coatingsTS EN 1844 Flexible sheets for waterproofing - Determination of ozone resistance - Plastic and rubber sheets for waterproofing on roofs
TS EN 1848-2 Flexible sheets for waterproofing - Determination of length, width and smoothness - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 1850-2 Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS HD 308 S2 Introduction of cores in cables and flexible cords
TS EN 495-5 Flexible sheets for waterproofing - Determination of low temperature foldability - Part 5: Plastic and rubber sheets for waterproofing on roofs
TS EN 495-5 Flexible sheets for waterproofing - Determination of low temperature foldability - Part 5: Plastic and rubber sheets for waterproofing on roofs
TS EN ISO 3822-3 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 846-13 Masonry - Auxiliary components - Part 13: Determination of resistance to impact, wear and corrosion of organic coatings
TS EN 1074-5 Valves for water supply - Compliance and verification tests for favorable design requirements - Part 5: Control valves
TS EN 1107-2 Flexible sheets for waterproofing - Determination of dimension stability - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 1107-2 Flexible sheets for waterproofing - Determination of dimension stability - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 12098-2 Control elements for heating systems - Part 2: Optimal start and stop control equipment for hot water heating systems
TS EN 12238 Ventilation - Aerodynamic tests of ventilation end elements
TS EN 12239 Valves for buildings - Air connection devices - Aerodynamic test and declaration for displacement flow applications
TS EN 12444 Doors and gates -Used in industrial and commercial spaces and garages -Resistance to wind load -Exercise and calculation
TS EN 12444 Doors and gates -Used in industrial and commercial spaces and garages -Resistance to wind load -Exercise and calculation
TS EN 12445 Doors and gates for commercial establishments and garages - Industrial construction - Safety of use of power operated doors - Test methods
TS EN 12445 Doors and gates for commercial establishments and garages - Industrial construction - Safety of use of power operated doors - Test methods
TS EN 12453 Doors and gates for commercial and industrial premises - Industrial building
TS EN 12453 Doors and gates for commercial and industrial premises - Industrial building
TS EN 12664 Thermal performance of building materials and products - Determination of heat treatment resistance by enclosed hot plate and heat flow meter methods - Medium and low heat resistant dry and humid products
TS EN 1296 Flexible sheets for waterproofing - Bituminous plastic and rubber sheets used in roofs - Artificial aging method by long-term exposure to high temperatures
TS EN 1296 Flexible sheets for waterproofing - Bituminous plastic and rubber sheets used in roofs - Artificial aging method by long-term exposure to high temperatures
TS EN 13051 Curtain walls - Water impermeability - Site test
TS EN 13410 Radiant heaters - Gas burning - Hanging on the ceiling - Ventilation rules for non-residential buildings
TS EN ISO 13793 Thermal performance of buildings - Thermal design of foundations to prevent the expansion effect of ice
TS EN 12606-2 Bitumen and bituminous binders - Determination of paraffin wax content - Part 2: Extraction method
TS EN 772-6 Masonry and masonry products - Part 6: Determination of bending resistance of concrete masonry units
TS EN 772-14 Masonry units-Test methods-Section 14: Determination of moisture movement of concrete and artificial stone masonry units
TS EN 846-4 Masonry-Auxiliary components-Test methods part 4: Determination of load-city characteristics and load capacities of tapes
TS EN 1052-3 Paper-Test methods-Part 3: Determination of initial shear strength
TS EN 1744-3 Tests for chemical properties of aggregates
TS EN 1990 Eurocade - Fundamentals of building design
TS EN 1991-1-1 Eurocode 1: Structure effects section 1-1: General effects densities, self-weight and loads affecting structures
TS EN 12171 Heating systems - for buildings - Method for the preparation of documents for operation, maintenance and use - Heating systems without a trained operator
TS EN 13408 Test methods for setting and fixing of floor surfaces and determination of bond strength
TS EN 13409 Test methods to be applied to the compounds which can be used in calendering and / or leveling works and can be set in hydraulic setting - Determination of setting time
TS EN 62056-42 Electrical measurement-Data conversion for meter reading, scheduling and load control-Part 42: Physical added operation and operations for directional asynchronous data conversion
TS EN 62056-46 Electrical measurement-Data conversion for meter reading, scheduling and load control-Part Data link layer using 46 hdlc protocol
TS EN 13470 Thermal insulation products for industrial plants and building equipment - Determination of apparent density of preformed thermal insulation products in tubular form
TS EN 12617-4 Concrete structures - Test methods for products and systems for protection and repair - Part 4: Determination of shrinkage and expansion
TS EN 13030 Ventilation-Terminals for buildings-Performance tests of simulated rain vents
TS EN 13057 Concrete structures - Test methods for products and systems for protection and repair - Determination of resistance to capillary water absorption
TS EN 13564-1 Flood protection devices in buildings-Part 1: Requirements
TS EN 13579 Concrete structures-Products and systems for protection and repair-Test methods-Drying test for hydrophobic impregnation
TS EN 13579 Concrete structures-Products and systems for protection and repair-Test methods-Drying test for hydrophobic impregnation
TS EN 13180 Ventilation of buildings-Air ducts-Dimensions and mechanical properties for flexible ducts
TS EN 13639 Determination of total organic carbon in limestone
TS EN ISO 3822-1 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 1: Measurement method
TS EN 13687-1 Concrete structures-Products and systems for protection and repair-Test methods-Determination of thermal compatibility-Part 1: Freezing in de-icing salt-Thawing test
TS EN 13687-2 Concrete structures-Products and systems for protection and repair-Test methods-Determination of thermal compatibility-Part 2-Heavy rain repetitions (thermal shock)
TS EN 13687-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 3: Thermal cycle without de-icing salt effect
TS EN 13687-4 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility section 4: Dry
TS EN 13687-5 Concrete structures - Test methods for products and systems for protection and repair - Determination of thermal compatibility - Part 5: Resistance to heat shocks
TS EN 13733 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the strength of structural bonding materials
TS EN 13377 Prefabricated wooden formwork beams - Characteristics, classification and evaluation
TS EN 13383-1 Protection layer stones section 1: Features
TS EN 62056-21 Electrical meter - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange
TS EN 13395-1 Concrete structures-Products and systems for protection and repair-Test methods-Determination of workability-Part 1: Fluid determination test of water-repellent mortars
TS EN 13395-4 Concrete structures-Products and systems for protection and repair-Test methods-Determination of machinability-Part 4: Application of repair mortars used on the surface
TS EN 13395-2 Concrete structures-Products and systems for protection and repair-Test methods-Determination of workability-Part 2: Free and mortar flow test
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods, determination of workability - Part 3: Test for the fluency of repair concrete
TS EN 12152 Curtain walls-Air permeability-Performance characteristics and classification
TS EN 12170 Heating systems - for buildings - Method for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator
TS EN 1075 Wooden structures - Test methods - Joints with perforated sheet metal binders
TS 2717 EN 13139 Aggregates - For mortar construction
TS EN 772-14 Masonry units - Test methods - Part 14: Determination of the moisture movement of concrete and artificial stone masonry units
TS EN 1991-1-1 Impacts on structures - Part 1-1: General effects - Densities, weight of buildings and other loads to which they are exposed (eurocode 1)
TS 7043 EN 13450 Aggregates for railway ballasts
TS EN 13408 Test methods to be applied to hydraulically setting compounds used in finishing and / or leveling works - Determination of bond strength
TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment
TS EN 13409 Test methods to be applied to the compounds which can be used in calendering and / or leveling works and can be set in hydraulic setting - Determination of setting time
TS EN 13057 Concrete structures - Products and systems for protection and repair - Test methods - Determination of resistance to capillary water absorption
TS EN 13579 Concrete structures - Products and systems for protection and repair - Test methods - Drying test for hydrophobic impregnation
TS EN 13579 Concrete structures - Products and systems for protection and repair - Test methods - Drying test for hydrophobic impregnation
TS EN 13687-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 2: Rain effect with high temperature difference (thermal shock)
TS EN 13687-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 3: Thermal cycles without de-icing salt effect
TS EN 13687-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 4: Thermal cycles in dry environments
TS EN 62056-21 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - Part 21: Direct on-site data exchange
TS EN 62056-42 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange
TS EN 13733 Concrete structures - Products and systems for protection and repair - Test methods - Determination of strength of adhesives used in construction
TS EN 13377 Prefabricated wooden formwork scaffold beams - Requirements, classification and evaluation
TS EN 13395-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 1: Spatial determination of thixotropic mortars
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 3: Determination of spreading in repair concrete
TS EN 13395-3 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 3: Determination of spreading in repair concrete
TS EN 13395-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 4: Application of repair mortars used in ceilings
TS EN 13395-4 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 4: Application of repair mortars used in ceilings
TS EN 1933 External awnings - Load resistance due to water collection - Test method
TS EN 951 Door leaves - Method for measuring height, width, thickness and edge steepness
TS ISO 13785-1 Fire reaction tests for building façades and additional coatings - Part 1: Medium-scale test
TS ISO 13785-2 Fire reaction tests for building façades and additional coatings - Part 2: Large-scale test
TS EN 13043 Bituminous mixtures and aggregates for surface applications in roads, airports and other open traffic areas
TS EN 13502 Chimneys - Requirements and test methods for clay / ceramic chimney heads
TS EN 13813 Screed materials and floor screeds - Screed materials - Specifications and requirements
TS EN 13494 Thermal insulation materials - Used in buildings - Determination of bonding strength of adhesive and floor covering materials to thermal insulation materials by tensile method
TS EN 13495 Thermal insulation materials - Used in buildings - Externally used composite thermal insulation systems (etıcs) - Determination of breaking resistance perpendicular to the surface by foam block test
TS EN 13498 Thermal insulation materials - Used in buildings - external composite thermal insulation systems (etıcs) - Determination of sinking resistance
TS EN 13639 Limestone - Determination of total organic carbon
TS EN 13892-1 Screed materials - Test methods - part 1: Sampling, preparation and curing for experiments
TS EN 13892-2 Screed materials - Test methods - part 2: Determination of flexural and compressive strength
TS EN 13892-4 Screed materials - Test methods - part 4: Determination of abrasion resistance of Bca-by Bca method
TS EN ISO 14438 Glass - Used in buildings - Determination of energy compensation value - Calculation method
TS EN 12170 Heating systems - for buildings - Processes for the preparation of operational, maintenance and use documents - Heating systems requiring trained personnel
TS 5228-3-1 EN 259-1 Wall coverings-In rolls-Heavy duty wall coverings-Part 1: Features
TS 5228-3-2 EN 259-2 Wall coverings-In rolls-Heavy-duty wall coverings-Part 2: Determination of impact resistance
TS 5228-3-1 EN 259-1 Wall coverings-In rolls-Heavy duty wall coverings-Part 1: Features
TS 5228-3-2 EN 259-2 Wall coverings-In rolls-Heavy-duty wall coverings-Part 2: Determination of impact resistance
TS EN 1490 Valves - Used in buildings - Combined temperature and pressure reducing valves - Tests and features
TS EN 12236 Ventilation - for buildings - Air duct hanger and supports - Strength properties
TS 5190 EN 26891 Wooden structures - Joints made with mechanical binders - General principles for determination of strength and deformation properties
TS 7332 EN 13085 Wall coverings - Characteristics of oak cork rolls
TS EN 1567 Valves - for buildings - Water pressure reducing and combined water pressure reducing valves - Features and tests
TS EN 13383-1 Protection layer stones (armor stone) - Part 1: Specifications
TS EN 12354-3 Acoustics of buildings - Calculation of acoustic performance of buildings from performance of components - Part 3: Insulation of airborne noise against outside noise
TS EN 13271 Wood fasteners - Characteristic load carrying capacity and slip modulus for joints using fasteners
TS EN 1935 Building hardware - Single axis hinges - Features and test methods
TS EN 60335-2-83 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2 - 83: Particular requirements for electrically heated strainers for roof drainage
TS 2212 EN 60335-2-21 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 1158 Building equipment - Door adjustment devices - Features and test methods
TS EN 13183-2 Moisture content of lumber - Part 2: Estimation by electric resistance method
TS EN 81-28 Elevators- Safety rules for construction and assembly-Elevators for human and freight transport section Alarms on 28 human and freight elevators
TS EN 81-70 Lifts - Safety requirements for construction and installation - Special applications for passenger and freight elevators section 70
TS EN 1015-18 Masonry mortar - Test methods - Part 18: Determination of water absorption coefficient of hardened mortar due to capillary effect
TS EN 1015-21 Masonry mortar - Test methods - Part 21: Determination of the compatibility of coarse plaster mortars made as one layer with the base materials
TS EN 1991-1-2 European rule 1 - Principles of design and impact of structures - Part 2-2: Building effects - Effects on structures exposed to construction
TS EN 13043 Aggregates - For surface treatment and bituminous mixtures to be used in roads, airports and other open traffic areas
TS EN 12729 Preventing contamination by recoil of drinking water - Type B-Type A
TS EN 12400 Windows and doors suitable for pedestrians - Mechanical durability - Requirements and classification
TS EN 12600 Glass - Used in buildings - Pendulum test - Impact test and performance characteristics for flat glass
TS EN 13049 Windows - Light and severe mass impact - Test method, safety requirements and classification
TS EN 13330 Louvers-Hard mass impact-Test method
TS EN 13373 Natural stones-Test methods-Determination of geometric properties of units
TS EN 13403 Ventilation in buildings - Non-metal ducts - Ducts made of duct insulation panels "
TS EN 13494 Thermal insulation products - Used in buildings - Determination of bonding strength of adhesives and flooring materials to thermal insulation materials by tensile method
TS EN 13495 Thermal insulation products - Used in buildings - Determination of tensile-Tensile strength of external composite thermal insulation systems (en 13495: 2002)
TS EN 13497 Thermal insulation products - Used in buildings - Determination of impact strength of external composite thermal insulation systems (en 13497: 2002)
TS EN 13498 - thermal insulation products - Used in buildings - Determination of penetration resistance of external composite thermal insulation systems (en 13498: 2002)
TS EN 13502 Chimneys - Characteristics and test methods for clay / ceramic chimney heads
TS EN 13564-2 Flood protection devices for buildings - Part 2: Test methods
TS EN ISO 13787 Thermal insulation products for construction equipment and industrial plants Determination of declared thermal conductivity
TS EN 13813 Screed materials and floor screeds - Screed materials - Specifications and requirements
TS EN 13892-1 Screed materials - Test methods - Part 1: Sampling, preparation and curing for experiments
TS EN 13892-2 Screed materials - Test methods - Part 2: Determination of flexural and compressive strength
TS EN 13892-4 Screed materials - Test methods - Part 4: Determination of abrasion resistance of Bca
TS EN 13892-5 Screed materials - Test methods - Part 5: Determination of abrasion resistance of screed material used as wear layer by means of rotary wheel
TS EN 13892-6 Screed materials - Test methods - Part 6: Determination of surface hardness
TS EN 13892-7 Screed materials - Test methods - Part 7: Determination of abrasion resistance of screed materials and floor coverings against rotating wheel
TS EN 13892-8 Screed materials - Test methods - Part 8: Determination of bond strength
TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment
TS EN ISO 15148 Hygothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion
TS EN 60335-2-83 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-83: Particular requirements for electrically heated strainers for roof drainage
TS EN 81-58 Elevators - Safety rules for construction and installation - Inspection and tests section 58: Fire resistance tests at exit doors
TS EN 1253-5 Strainers - Buildings used - Part 5: Strainers with holder for light liquid from water
TS EN 1991-1-3 Eurocode 1: Effects on structures - Part 1-3: General effects - Snow loads
TS EN ISO 10426-2 Oil and gas industry - Cements and materials for well cementing - Part 2: Tests of well cements (ISO 10426-2: 2003)
TS EN 12365-2 Building equipment - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 2: Test methods for linear clamping force
TS EN 12365-3 Building hardware - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 3: Test method for determination of deformation recovery
TS EN 12365-4 Building hardware - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 4: Test method for the determination of accelerated post-aging strain recovery
TS EN 12412-2 Thermal performance of windows, doors and shutters-Determination of thermal conductivity by hot box method 2: Framework
TS EN 12412-2 Thermal performance of windows, doors and shutters-Determination of thermal conductivity by hot box method 2: Framework
TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal permeability by hot box method 4: Movable louver boxes
TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal permeability by hot box method 4: Movable louver boxes
TS EN 13078 Devices used to prevent contamination caused by the escape of potable water - Air inlet and flood-fed submersible air space - Family a, type c
TS EN 13079 Contamination prevention devices from backflow of potable water - Air gap with injector - group A, type D
TS EN 13499 Thermal insulation materials for buildings - Composite systems for external thermal insulation based on expanded polystyrene
TS EN 13500 Thermal insulation materials - For buildings - Composite systems for external thermal insulation based on glass wool (etıcs) - Specifications
TS EN 13529 Concrete structures - Products and systems for protection and repair - Test methods - Resistance to severe chemical effects
TS EN 13558 Properties of impact-modified extruded acrylic sheets for domestic shower trays
TS EN 13559 Properties of impact-modified co-extruded abs / acrylic sheets for domestic baths and shower trays
TS EN 13793 Thermal insulation products for building applications - Determination of behavior under repeated loads
TS EN ISO 15186-1 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 1: Laboratory measurements "
TS EN ISO 15927-1 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 1: Monthly average of individual meteorological elements "
TS EN ISO 15927-1 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 1: Monthly average of individual meteorological elements "
TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment
TS EN 62052-11 Electrical measuring equipment (aa) - General rules, tests and test conditions - Part 11: Meter
TS EN 62053-11 Electrical measuring equipment (aa) - Specific requirements - Part 11: Electromechanical meters for active energy (class 0,5 - class 1 and class 2)
TS EN 62053-21 Electrical measuring equipment (aa) - Special requirements - Part 21: Static meters for active energy (class 1 and class 2)
TS EN 62053-22 Electrical measuring equipment (aa) - Special requirements - Part 22: Static meters - For active energy (class 0,2 s and class 0,5 s)
TS EN 62053-23 Electrical measuring equipment (aa) - Special rules section 23: Static meters - For reactive energy (class 2 and class 3)
TS EN 13187 Thermal performance in buildings - Qualitative determination of thermal irregularities on building surfaces - Infrared method
TS 8403 EN ISO 7390 Building construction - Joint materials - Determination of leakage resistance of sealing materials
TS EN 12237 Ventilation in buildings - Duct network - Circular sheet metal ducts - Strength and tightness
TS EN 81-28 Elevators - Safety regulations for construction and installation - Passenger and freight elevators - Part 28: Remote alarm for passenger and freight elevators
TS EN 81-58 Lifts - Safety requirements for construction and installation - Inspection and tests - Part 58: Fire resistance test for floor doors
TS EN 246 Sanitary fittings - General specifications for flow regulators
TS EN 60335-2-51 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 60335-2-84 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-84: Particular requirements for toilets
TS EN 60335-2-88 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems
TS EN 12412-2 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 2: Frames
TS EN 12412-2 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 2: Frames
TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 4: Roll louver boxes
TS EN 12412-4 Thermal performance of windows, doors and louvers - Determination of thermal conductivity by hot box method - Part 4: Roll louver boxes
TS EN 13330 Shutters - Hard mass impact - Test method
TS EN 60335-2-73 Safety regulations - For domestic and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
TS EN 12810-1 Facade scaffolding made of pre-fabricated components - Part 1: Product specifications
TS EN 12811-3 Temporary work equipment - Part 3: Loading tests
TS 213-2 EN 13748-2 Terrazo tiles - For outdoor use
TS EN 13500 Thermal insulation materials - Used in buildings - mineral wool based external composite thermal insulation systems (etıcs) - Features
TS 10762-1 EN ISO 15875-1 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 1: General
TS 10762-5 EN ISO 15875-5 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 5: suitability of the system
TS EN 81-80 Elevators - Safety rules for construction and installation-Existing elevators- Part: 80 rules for improving the safety of existing passenger and freight elevators
TS EN 1337-4 Bearings - Used in structures - Part 4: Roller bearings
TS EN 1337-6 Bearings - Used in structures - Part 6: Cradle bearings
TS EN 1504-10 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 1771 Concrete structures - Products and systems for protection and repair - Test methods - Determination of injectability and splitting test
TS EN 12354-6 Building acoustics -Calculation of acoustic performance of structures from the performance of elements - Part 6: Sound absorption in confined spaces
TS EN 12504-4 Concrete tests - Part 4: Determination of ultrasound transmission rate
TS EN 12519 Windows and doors for pedestrians - Terms and descriptions
TS EN 12617-2 Concrete structures - Products and systems for protection and repair - Test methods - Part 2: Shrinkage of cracked injection products with polymer binders: Volumetric shrinkage
TS EN 12618-2 Concrete structures - Products and systems for protection and repair - Test methods - Part 2: Determination of adhesion of injection products with or without thermal cycling - Determination of adhesion by bond tensile strength
TS EN 12618-3 Concrete structures - Products and systems for protection and repair - Test methods - Part 3: Determination of adhesion of injection products with or without thermal cycling - Inclined cutting method
TS EN 12637-1 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete
TS EN 12813 Temporary work equipment - Load-bearing towers of pre-fabricated elements - Special structural design methods
TS EN 13454-1 Binders, composite binders and factory made mixtures - Calcium sulphate based - Used as screed material - Part 1: Definitions and required properties
TS EN 13454-1 Binders, composite binders and factory made mixtures - Calcium sulphate based - Used as screed material - Part 1: Definitions and required properties
TS EN 13465 "Ventilation in buildings - Calculation methods for determination of air flow in residential buildings"
TS EN 14016-1 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions and specifications
TS EN 14016-2 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods
TS EN 14063-1 Thermal insulation materials and products - On-site castings - Expanded clay lightweight aggregate used - Part 1: Pre-assembly properties of loose-filled products
TS EN 14117 Concrete structures - Products and systems for protection and repair - Test methods - Determination of the viscosity of cement based injection products
TS EN 14124 Inlet valves - For float reservoirs
TS EN 14251 Round building wood - Test method
TS EN 14406 Concrete structures - Products and systems for protection and repair - Test methods - Determination of expansion rate and evaluation of expansion
TS EN 14497 Concrete structures - Products and systems for protection and repair - Test method - Determination of filtration stability stability
TS EN 14498 Concrete structures - Products and systems for protection and repair - Volume and mass changes at the end of air drying and retention cycles in water
TS EN 14608 Windows - Determination of resistance to sag force
TS EN 14609 Windows - Determination of resistance to static torsion
TS EN ISO 16032 Acoustics - Measurement of Sound Pressure Level in Service Equipment in Buildings - Engineering Method
TS EN 1337-2 Bearings - Used in structures - Part 2: Sliding elements
TS EN 1337-7 Bearings - Used in structures - Part 7: Spherical and cylindrical ptfe bearings
TS EN ISO 13790 Energy performance of buildings - Calculation of energy use for space heating and cooling
tst EN 13779 (Priority 1) Ventilation - Non-residential - Performance characteristics for ventilation and room air conditioning systems
TS EN 80 Suspended urinals - Connection dimensions
TS EN 1504-2 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-4 Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 4: Structural bonding
TS EN 12614 Concrete structures - Products and systems for protection and repair - Test methods - Determination of glass transition temperature of polymers
TS EN 12951 Prefabricated roof accessories - Fixed roof ladders - Product specifications and test methods
TS EN 13216-1 Chimneys - Test methods for system chimneys - General test methods
TS EN 14374 Timber constructions - Layered structural veneer wood - Requirements
TS EN 13970 Flexible sheets - For waterproofing - Bituminous sheets controlling water vapor transmission - Definitions and features
TS EN 14716 Stretched ceilings - Required properties and test methods
TS EN ISO 15927-5 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 5 - Outdoor temperatures and related wind data for winter design
TS EN ISO 15927-5 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 5 - Outdoor temperatures and related wind data for winter design
TS EN 772-9 / A1 Masonry units - Test methods - Part 9: Determination of the net volume and percentage and net volumes of clay and lime sandstone masonry units by sand filling method
TS EN 1928 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of waterproofing
TS EN 81-70 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 70: Accessibility for passenger elevators including disabled persons
TS EN 1991-1-3 Impacts on structures - Part 1-3: General effects - Snow loads (eurocode 1)
TS EN 1991-1-4 Impacts on structures - Part 1-4: General effects - Wind effects (eurocode 1)
TS EN 1991-1-4 Impacts on structures - Part 1-4: General effects - Wind effects (eurocode 1)
TS EN 1462 Cantilever clamps - for rain gutters - Requirements and tests
TS EN 215 Radiator valves - Thermostatic - Specifications and test methods
TS EN 13969 Flexible boards for waterproofing - Bituminous moisture insulating boards, including boards for storage in basements - Descriptions and specifications
TS EN 13970 Flexible sheets for waterproofing - Bituminous water vapor control layers - description and specifications
TS EN 14716 Tension ceilings - Requirements and test methods
TS EN 303-3 / A2 Boilers - Part 3: Central heating boilers - Gas burning - System consisting of boiler body and forced draft burner
TS 25 Natural pozzolan - Used in cement and concrete - Definitions, requirements and eligibility criteria
TS 3078 Building construction - Joint sealing materials - Pvc plastic waterstop seals
TS 3323 Concrete - Preparation of pressure test specimens, accelerated spheres and tests
TS EN 14251 Round wood - Structural purposes - Test methods
TS EN 13558 Impact-modified extruded acrylic sheets used in domestic shower trays - Specification
TS EN 13559 Impact modified coextruded abs / acrylic sheets for bath tubs and shower trays for domestic use - Specifications
TS EN 81-80 Elevators - Safety rules for construction and installation-Existing elevators-Section 80: Rules for improving the safety of existing passenger and freight elevators
TS EN 13969 Waterproofing flexible covers - Moisture resistant bituminous schists, including those used for storage on the ground floor - Definitions and characteristics
TS EN 1155 / A1 Building hardware - Electrically driven, open holding devices for swing doors on both sides - Features and test methods
tst EN 1998-1 Earthquake resistant design - General rules, seismic effects and rules for buildings
TS 2212 EN 60335-2-21 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
tst 200559161 Hygienic air conditioning and ventilation in hospitals - Preparing projects, receiving (acceptance) and periodic maintenance of the system
tst 200559161 Hygienic air conditioning and ventilation in hospitals - Preparing projects, receiving (acceptance) and periodic maintenance of the system
TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt" - Modification ac
TS EN 13383-1 / AC Protection layer stones (armor stone) - Part 1: Specifications
TS 7043 EN 13450 / AC Aggregates for railway ballasts
TS EN 1998-5 Design of earthquake resistant structures - Part 5: Foundations, retaining structures and geotechnical considerations
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1993-1-10 Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (Eurocode 3)
TS EN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints
TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning
TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning
TS EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and building rules
TS EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and building rules
TS EN 1991-1-4 Eurocode 1: Design and impact guidelines for buildings - Part 1-4: Building effects - Wind impact
TS EN 62052-21 Electrical measuring equipment (aa) - General rules, tests and test requirements - Part 21: Tariff and load control equipment
TS EN 60335-2-105 Safety regulations - Part for household and similar electrical appliances 2-105: Particular requirements for multifunctional shower enclosures
TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt" - Modification ac
TS EN 13383-1 / AC Protection layer stones (armor stone) - Part 1: Specifications
TS 7043 EN 13450 / AC Aggregates for railway ballasts
TS EN 1998-5 Design of earthquake resistant structures - Part 5: Foundations, retaining structures and geotechnical considerations
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1994-1-1 Eurocode 4: Design of steel and concrete mixed structures - Part 1.1: General rules and rules for buildings
TS EN 1993-1-10 Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (Eurocode 3)
TS EN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints
TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning
TS EN 1992-1-2 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire planning
TS EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and building rules
TS EN 1992-1-1 Eurocode 2: Design of concrete structures - Part 1-1: General rules and building rules
TS EN 1991-1-4 Eurocode 1: Design and impact guidelines for buildings - Part 1-4: Building effects - Wind impact
TS EN 62052-21 Electrical measuring equipment (aa) - General rules, tests and test requirements - Part 21: Tariff and load control equipment
TS EN 60335-2-105 Safety regulations - Part for household and similar electrical appliances 2-105: Particular requirements for multifunctional shower enclosures
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
tst 12867 Landscape architecture - Design services - Rules
TS EN ISO 15927-4 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 4 - Hourly data used to evaluate annual energy use for heating and cooling
TS EN ISO 354 Measurement of acoustic-sound absorption in the resonant chamber
TS EN 1928 Flexible sheets - For waterproofing - Determination of water resistance
TS EN 1931 + AC Flexible sheets - For waterproofing - Determination of water vapor transmission properties
TS EN 1462 Cantilever clamps -For rain gutters -Features and tests
TS EN 1717 General features of water pollution prevention devices and prevention of water pollution caused by backflow in drinking water installations
TS EN 12237 Ventilation in buildings-Duct network-Circular cross-section sheet metal air ducts-Strength and tightness
TS EN 480-5 Chemical additives - For concrete, mortar and grout - Test methods - Part 5: Determination of capillary water absorption
TS EN 480-5 Chemical additives - For concrete, mortar and grout - Test methods - Part 5: Determination of capillary water absorption
TS EN 480-12 Chemical additives - For concrete, mortar and grout - Test methods - part 12: Determination of alkali content
TS EN 480-12 Chemical additives - For concrete, mortar and grout - Test methods - part 12: Determination of alkali content
TS EN 695 Kitchen Sinks - Connection sizes
TS EN 62054-11 Electric meter (aa) - Tariff and load control - part 11: Particular requirements for electronic wavelet controlled receivers
TS EN 62054-21 Electric meter (aa) - Tariff and load control - part 21: Particular requirements for time switches
TS EN 1990 / A1 Eurocode - Fundamentals of building design
TS EN 62052-21 Electrical measuring equipment (aa) - General rules, tests and test requirements - Part 21: Tariff and load control equipment
TS EN 1504-3 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 13450 / AC Aggregates for railway ballasts
TS EN 12261 / AC Gas meters-Turbine meters
TS EN 933-5 / A1 Tests for geometric properties of aggregates - Part 5: Determination of the percentage of crushed and broken surfaces in coarse aggregates
TS EN 1015-19 / A1 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar
TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt"
TS EN 1367-3 / AC Tests for thermal and degradation properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt"
TS EN 1504-10 / AC Concrete structures - Products and systems for protection and repair - Definitions, specifications, quality control and conformity assessment - Part 10: On-site application of products and systems and quality control in these processes
TS EN 14394 + A1 Boilers - Boilers with forced draft burners - Rated heat output does not exceed 10 MW and has a maximum operating temperature of 110 ºC
TS EN 517 Auxiliary equipment for roofs - Roof hooks
TS EN 516 Ready-made accessories for roofs -Roof transport facilities -Walking path, wide and narrow steps
TS EN 517 Ready-made accessories for roofs - Roof hooks
TS EN 1158 / A1 / AC Building equipment - Door adjustment devices - Features and test methods
TS EN 13126-8 Building hardware - Requirements and test methods for windows and glazed exterior doors - Part 8: Tilt and turn, first tilt and only rotating hardware
TS EN 62053-52 Electrical measuring equipment (aa) - Particular requirements Section 52: Symbols
TS EN 13836 Boilers - Central heating boilers - Gas burning - Boilers type B with nominal heat input 300 kw - 1000 kw
TS EN 13063-1 + A1 Chimneys - Chimneys with clay / ceramic lining - Part 1: Rules and test methods for resistance to soot ignition
TS EN 12691 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of impact resistance
TS EN 13084-4 / AC Chimneys - Free standing - Part 4: Brick lining - Design and application
TS EN 60335-2-73 / A1 Safety regulations - Part for household electrical appliances 2-73: Particular requirements for fixed immersion heaters
TS EN 60335-2-90 Safety regulations - Part for household and similar electrical appliances 2-90: Particular requirements for commercial microwave ovens 1
TS EN 480-2 Chemical additives - For concrete, mortar and grout - Test methods - Part 2: Determination of setting time
TS EN 656 / A1 Boilers - Central heating boilers - Gas burning - Boilers type B with rated heat load 70 kw-300 kw
TS EN 846-8 / A1 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 1504-6 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 6: Anchoring of steel reinforcing bars
TS EN 1504-7 Concrete structures - Products and systems for protection and repair - Definitions, requirements, quality control and conformity assessment - Part 7: Corrosion protection of reinforcement
TS EN 1992-3 Eurocode 2: Design of concrete structures - Part 3: Fluid retention and storage structures
TS EN 1992-3 Eurocode 2: Design of concrete structures - Part 3: Fluid retention and storage structures
TS EN 13412 Concrete structures - Products and systems for protection and repair - Test methods - Determination of modulus of elasticity in pressure
TS EN 14845-2 Fibers - For use in concrete - Test methods - Part 2: Effect on concrete
TS EN 62054-11 Electric meter (aa) - Tariff and load control - Part 11: Particular requirements for electronic wavelet controlled receivers
TS EN 62054-21 Electric meter (aa) - Tariff and load control - Part 21: Particular requirements for time switches
TS EN 1744-5 Tests for chemical properties of aggregates - Part 5: Determination of acid-soluble chloride salts
TS EN 1744-6 Tests for chemical properties of aggregates - Part 6: Determination of the effect of recovered aggregate extract on cement setting time
TS EN 480-14 Chemical additives - For concrete, mortar and grout - Test methods - Part 14: Determination of the effect on the susceptibility of reinforcing steel to corrosion by potentiostatic electrochemical testing
TS EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges
TS EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges
TS EN 12097 Ventilation for buildings - Ducts - Duct construction rules
TS EN 14220 Wood and wood-based material in exterior windows, exterior door sashes and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based material in interior windows, interior door sashes and interior door frames - Requirements and features
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15221-2 Facility management - Part 2: Guidelines for the preparation of facility management contracts
TS EN 50470-1 Electrical measuring equipment (aa) - Part 1: General rules, tests and test conditions - Measuring equipment (class a, b and c)
TS HD 60364-4-41 Electrical installation in buildings section 4- Safety protection group 41- Protection against electric shock
TS EN 13969 / A1 Flexible sheets for waterproofing - Bituminous moisture insulating boards, including boards for storage in basements - Descriptions and specifications
TS EN 13970 / A1 Flexible sheets for waterproofing - Bituminous water vapor control layers - description and specifications
TS EN 303-7 Boilers - Part 7: Gas-fired central heating boilers with forced draft burners with rated heat output not exceeding 1000 kW
TS ISO 8142 Thermal insulation - Glued preformed artificial mineral fiber pipe sections - Specifications
TS 13353 Boron active belite cement - Definitions, composition, properties and conformity criteria
TS EN 383 Timber - Test methods - Basic values of anchor type fasteners and determination of burying strength
TS EN 1015-1 / A1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis)
TS EN 1936 Natural stones- Test methods- Determination of real density, apparent density, total and open porosity
TS EN 1999-1-1 Design of aluminum structures - Part 1-1: General rules - Rules for buildings
TS EN 1999-1-1 Design of aluminum structures - Part 1-1: General rules - Rules for buildings
Eurocode 1999: Design of aluminum structures - Part 1-2: General rules - Structural fire design TS EN 9-1-2
Eurocode 1999: Design of aluminum structures - Part 1-2: General rules - Structural fire design TS EN 9-1-2
TS EN ISO 10848-2 / AC Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory - Part 2: Application for lightweight elements where the coupling effect is low
TS EN 13084-1 Industrial chimneys - Free standing - Section 1: General features
TS EN 13791 Determination of compressive strength in situ of structures and precast concrete components
TS EN 60335-2-97 Safety regulations - Part for household electrical appliances 2-97: Particular requirements for drives for winding shutters, awnings, sun visors and similar equipment
TS EN 14024 Metal profiles - Thermal barrier - Mechanical performance - Requirements, evidence and tests for evaluation
TS EN 14024 Metal profiles - Thermal barrier - Mechanical performance - Requirements, evidence and tests for evaluation
TS EN 1504-10 / AC Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 14991 Precast concrete products - Basic elements
TS EN 303-7 Boilers - Part 7: Gas-fired central heating boilers with forced draft burners with rated heat output not exceeding 1000 kW
TS EN 15240 Ventilation for buildings - Energy performance in buildings - Guidelines for the inspection of air conditioning systems
TS EN 15242 Ventilation for buildings - Calculation methods for determination of air flow in buildings (including uncontrolled leaks to buildings)
TS EN 12664 Building materials and products - Determination of thermal resistance by means of protected table heater and heat flux meter - Dry and damp products with medium and low thermal resistance
TS EN 12664 Building materials and products - Determination of thermal resistance by means of protected table heater and heat flux meter - Dry and damp products with medium and low thermal resistance
TS EN 12794 + A1 Precast concrete products - Foundation piles
TS EN 1367-1 Tests for thermal and degradation properties of aggregates - Part 1: Determination of resistance to freezing and thawing
TS EN 1739 Prefabricated components made of aerated concrete or porous lightweight concrete - Determination of shear strength against joint forces with joints between components
TS EN 1997-2 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)
TS EN 1997-2 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)
TS EN 1999-1-3 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)
TS EN 1999-1-3 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)
TS EN 1052-3 / A1 Masonry - Test methods - Part 3: Determination of initial shear strength
TS EN 15323 Bitumen and bituminous binders - Accelerated long-term aging / conditioning-Rotating roller method (RCAT)
TS EN 15361 Reinforced prefabricated components made of aerated concrete - Determination of the effect of the corrosion protection coating on the anchor capacity of the anchor rods in the transverse direction
TS EN 62056-46 / A1 Electrical measurement - Data exchange for load control, tariff and measurement reading - Part 46: HDLC protocol
TS EN 445 Sherbet - For pretension reinforcement - Test methods
TS EN 13831 Closed expansion vessels with diaphragm for water installations
TS EN 15316-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Section 1: General
TS EN 15316-2-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 2: Space heating emission systems
TS EN 15316-4-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3: Heat generation systems, thermal solar systems
TS EN 15316-4-4 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 4: Heat generation systems, cogeneration systems integrated with buildings
TS EN 15316-4-5 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 5: Performance and quality of district heating production systems, district heating and large volume systems
TS EN 15316-4-6 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 6: Heat generation systems, photoltaic systems
TS EN 60335-2-106 Safety regulations - For electrical appliances used in households and similar places - Part 2-106: Particular requirements for heating units and heated carpets for room heating installed under removable floor covers
TS EN 13443-2 + A1 Water conditioning equipment used in the building-Mechanical filters-Part 2: Particulate value 1fm up to 80 µm Performance safety and test rules
TS EN 14652 + A1 Water treatment equipment for buildings - Membrane separation devices - Performance, safety and test rules
TS EN 14743 + A1 Water treatment equipment used in the building - Softeners - Performance, safety and test requirements
TS EN 14812 + A1 Indoor water treatment device-Chemical dosing system-Preset dosing systems-Features for performance, safety and testing
TS EN 14897 + A1 Indoor water conditioning equipment - Low pressure ultraviolet radiators - Mercury devices performance safety and test rules
TS EN 13126-7 Building hardware - Features and test methods for windows and glazed doors section 7: Handles
TS EN 13443-1 + A1 Water conditioning equipment in buildings - Mechanical filters - Part 1: Particle value 80 µm to 150 µm Specification for performance, safety and testing
TS EN 1548 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Bitumen exposure method
TS EN 15316-3-1 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-1: Domestic hot water systems-Determining requirements
TS EN 15316-3-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Section 3-2: Domestic hot water systems-Distribution system
TS EN 15316-3-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-3: Domestic hot water systems-Production
TS EN 15450 Heating systems in buildings-Design of heat pump heating systems
TS EN ISO 15927-6 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 6 - Accumulated temperature differences (degrees-days)
TS EN 60335-2-105 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-105: Particular requirements for multifunctional shower enclosures
TS EN 60335-2-106 Safety regulations - For household and similar electrical appliances - Part 2-106: Particular requirements for heating units installed under heated carpets and removable floor coverings for heating the room
TS EN 12151 Concrete and mortar-preparing machines and installations - Safety regulations
tst 11758-1 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 1: Specifications
TS EN 115-1 + A1 Safety for escalators and escalators - Part 1: Construction and installation
TS EN 12151 Concrete and mortar-preparing machines and installations - Safety regulations
tst 11758-1 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 1: Specifications
TS EN 115-1 + A1 Safety for escalators and escalators - Part 1: Construction and installation
TS EN 15285 / AC Stacked stones - Modular tiles for floor and stair covering (internal and external)
TS EN 200 Sanitary fittings - Single taps and combination taps (pn 10) - General technical specifications
TS 706 EN 12620 + A1 Concrete aggregates
TS EN 13242 + A1 Aggregates for bonded and hydraulic bonded materials used in civil engineering works and road construction
TS EN 14566 + A1 Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods
TS EN 14592 + A1 Wooden structures - Dowel fasteners - Requirements
TSE CEN / TS 15680 Prefabricated wooden stairs - Mechanical test methods
TS EN 14545 Wooden structures - Connectors - Requirements
TS EN 60335-2-51 / A1 Safety regulations - For domestic and similar electrical appliances - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water installations
TS EN 60335-2-84 / A1 Safety regulations - For household electrical appliances - Part 2-84: Particular requirements for toilets
TS EN 81-3 + A1 Lifts - Safety regulations for construction and installation section 3: Electrical and hydraulic service lifts
TS EN 196-7 Cement test methods - Part 7: Methods of sampling and preparation of cement
TS EN 198 Sanitary installations - Bath tubs made of cast acrylic sheets by interconnection - Features and test methods
TS EN 934-1 Chemical additives - For concrete, mortar and grout - Part 1: General requirements
TS EN 1090-3 Steel and aluminum construction applications - Part 3: Technical requirements for aluminum structures
TS EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 7: Determination of grain density of fill - Picnometer method
TS EN 1367-6 Tests for thermal and wear properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
TS EN 15069 Gas safety valves - For metal hose assemblies - For indoor use - For connection of gas appliances
TS EN ISO 10211 Thermal bridges in building structures - Heat flows and surface temperatures - Detailed calculation methods
TS EN 13126-15 Building hardware - Requirements and test methods for windows and glazed doors - Part 15: Rollers for horizontal sliding and sliding folding windows and doors
TS EN 13126-16 Building hardware - Requirements and test methods for windows and glazed doors - Part 16: Equipment for lifting and sliding windows and doors
TS EN 13126-17 Building hardware - Requirements and test methods for windows and glazed doors - Part 17: Equipment for tilting and sliding windows and doors
TS EN 14963 Roofing - Continuous plastic roof windows with or without collar - Classification, requirements and test methods
TS EN 14964 Rigid substrates - for discontinuous roofing materials - Recipes and specifications
TS EN 15037-1 Precast concrete products - Gear laying systems - Part 1: Beams
TS EN 15241 Ventilation - Calculation method for energy loss due to ventilation and filtration in commercial buildings for buildings
TS EN 15287-2 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for appliances integrated into the room
TS EN 15316-2-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Section 2-3: Distribution systems for space heating
TS EN 15316-4-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 4-1: Heat generation systems for space heating, fuel combustion systems (boilers)
TS EN 15316-4-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 4-2: Heat generation systems for space heating, heat pumps
TS 12576 Urban roads - Design rules for structural measures and markings for accessibility at sidewalk and pedestrian crossings
TS EN 15422 Precast concrete products - Properties of glass fiber reinforcement material used in mortars and concretes
TS EN 15570 Furniture fittings - Strength and durability of hinges and hinge elements - Hinges rotating about a vertical axis
TS EN ISO 21003-5 Multilayer pipe systems for indoor hot and cold water installations - Part 5: Compliance with the purpose of the system
TS EN 60335-2-10 / A1 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-10: Particular requirements for floor maintenance machines and wet scrubbing machines
TS EN 60335-2-84 / A1 Safety regulations - For household electrical appliances - Part 2-84: Particular requirements for toilets
TS EN 60335-2-105 / A1 Safety regulations - Part for household electrical appliances 2-105: Particular requirements for multifunctional shower enclosures
TS EN 1994-2 / AC Design of steel and concrete composite structures - Part 2: General rules and rules to be applied to bridges (eurocode 4)
TS EN 1994-2 / AC Design of steel and concrete composite structures - Part 2: General rules and rules to be applied to bridges (eurocode 4)
TS EN 1994-2 / AC Design of steel and concrete composite structures - Part 2: General rules and rules to be applied to bridges (eurocode 4)
TS EN ISO 13789 Thermal performance of buildings-Transmission heat loss coefficient-Calculation method
TS EN 263 Sanitary ware - Cross-linked cast acrylic sheets for bath tubs and shower trays for domestic use
TS EN 14488-4 + A1 Shotcrete - Tests - Part 4: Determination of bond strength in cores by direct tensile strength
tst 11386 Chimneys - for residential buildings and similar buildings - Design and construction rules
TS EN 13126-15 Building hardware - Specification and test methods for windows and glazed doors - Part 15: Sliding rollers for horizontal sliding and sliding folding windows and doors
TS EN 13126-16 Building hardware - Specification and test methods for windows and glazed doors - Part 16: Hardware for lifting and sliding windows and doors
TS EN 13126-17 Building hardware - Specification and test methods for windows and glazed doors - Part 17: Hardware for tilt and slide windows and doors
TS EN 13172 Thermal insulation products - Conformity assessment
S EN 13831 Closed expansion vessels with diaphragm for water installations
TS EN 934-1 Chemical additives - For concrete, mortar and grout - Part 1: Common requirements for additives
Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3822: Measurement method TS EN ISO 1-1 / A1
TS 2212 EN 60335-2-21 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN ISO 11691 Acoustics - Measurement of insertion loss of flow-through duct silencers - Laboratory research method
TS EN 12390-5 Concrete - Hardened concrete tests - Part 5: Determination of flexural strength of test specimens
TS EN 12350-1 Concrete - Fresh concrete tests - Part 1: Sampling
TS EN 12350-2 Concrete - Fresh concrete tests - Part 2: Slump test
TS EN 12350-3 Concrete - Fresh concrete tests - Part 3: Mid-term test
TS EN 12350-6 Concrete - Fresh concrete tests - Part 6: Density
TS EN 12350-7 Concrete - Fresh concrete tests - Part 7: Determination of air content - Pressure methods
TS 12850 Authorized services - Ventilation and air conditioning systems - Air handling units, air conditioners, chillers, fan coils, fans (fans, ventilators), air purifiers and air curtains. - Rules
TS EN 1991-1-2 / AC Effects on structures - Part 1-2: General effects - Effects on structures exposed to fire (eurocode 1)
TS EN ISO 3822-3 / A1 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 12418 + A1 Masonry and stone cutting machines used in construction sites - Safety
TS EN 437 + A1 Test gases - Test pressures - Device categories
TS EN 1125 Building equipment - Panic exit devices operated by the horizontal arm in the direction of escape - Rules and test methods
TS EN 12390-6 Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of splitting test specimens
tst EN 1998-4 Design of earthquake resistant structures - Part 4: Silos, tanks and pipelines
TS EN 60335-2-83 / A1 Safety regulations - For household and similar electrical appliances - Part 2-83: Particular requirements for electrically heated sieves for roof drainage
TS EN 13670 Construction of concrete structures
TSE K 11 Cement and acrylic based, two component, semi-flexible waterproofing material
TS EN 12635 + A1 Doors - Used in industrial and commercial buildings and garages - Installation and operation
TS EN 777-3 Heating systems - Radiant tube - Gas burner - Multi burner - Ceiling mounted for outdoor use - Part 3: System f- Safety
TS EN 777-2 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 2: System e-Safety
TS EN 777-1 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 1: System d - Safety
TS EN 12418 + A1 Masonry and stone cutting machines for construction sites - Safety
TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers
TS EN 12635 + A1 Doors - used in industrial and commercial buildings and garages - installation and use
TSE CEN / TR 15840 Conformity assessment of fly ash used in concrete - Guidelines for the application of EN 450-2
TS HD 60364-7-721 Electrical installation in buildings - Part 7-721: Special facilities or areas - Specification for marinas and similar areas
TS HD 60364-7-709 Electrical installation in buildings - Part 7-709: Special facilities or areas - Specification for marinas and similar areas
TS HD 60364-7-709 Electrical installation in buildings - Part 7-709: Special facilities or areas - Specification for marinas and similar areas
TS HD 60364-7-708 Electrical installation in buildings - Part 7-708: Special facilities or areas - Caravan parks - Features for campsites and similar areas
TS EN 12350-1 Concrete - Fresh concrete tests - Part 1: Sampling
TS EN 12350-2 Concrete - Fresh concrete tests - Part 2: Slump test
TS EN 12350-3 Concrete - Fresh concrete tests - Part 3: Mid-term test
TS EN 12350-4 Concrete - Fresh concrete tests - Part 4: Degree of compressibility
TS EN 12350-5 Concrete - Fresh concrete tests - Part 5: Spreading table test
TS EN 12350-6 Concrete - Fresh concrete tests - Part 6: Density
TS EN 12350-7 Concrete - Fresh concrete tests - Part 7: Determination of air content - Pressure method
TS EN 12390-2 Concrete - Hardened concrete tests - Part 2: Preparation and curing of test specimens to be used in strength tests
TS EN 12390-3 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 12390-5 Concrete - Hardened concrete tests - Part 5: Determination of flexural strength in test specimens
TS EN 12390-7 Concrete - Hardened concrete tests - Part 7: Determination of hardened concrete density
TS EN 12390-8 Concrete - Hardened concrete tests - Part 8: Determination of depth of water treatment under pressure
TS EN 12504-1 Concrete - Concrete tests in structure - Part 1: Core samples - Core drilling, inspection and determination of compressive strength
TS EN 12808-4 Joint fillers - For tiles - Part 4: Determination of shrinkage
TS EN 12850 Bitumens and Bituminous binders - Determination of ph value of bitumen emulsions
Acoustics - Laboratory tests of noise emitted from devices and instruments used in water supply plants - Part 3822: Measurement method - Amendment 1: Measurement uncertainty TS EN ISO 1-1 / A1
TS EN ISO 3382-1 Acoustics - Measuring acoustic parameters of rooms - Part 1: Performance gaps
TS EN 1856-2 Chimneys - Requirements for metal chimneys - Part 2: metal chimney linings and chimney connection pipes
TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules for buildings (eurocode 3)
TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules for buildings (eurocode 3)
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Structural fire design (Eurocode 5)
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Structural fire design (Eurocode 5)
tst 201079614 Guide to dimensions designed for older people
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 12440 Natural stones - Naming criteria
TS EN 60335-2-73 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
TS EN 15824 Exterior and interior plasters - Organic binder - Features
TS EN 196-6 Cement test methods - Part 6: Determination of fineness
TS EN 14250 Wooden structures - Prefabricated structural elements combined with riveted metal plates - Product requirements
TS EN 60335-2-78 / A1 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-78: Particular requirements for outdoor barbecues
TSE CEN / TR 115-3 Safety on escalators and moving escalators - Part 3: EN 115: 1995 and its amendments to EN 115-1: 2008
TS EN 1991-1-4 / AC Impacts on structures - Part 1-4: General effects - Wind effects (Eurocode 1)
TS EN 1993-1-8 / AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)
TS EN 1993-1-8 / AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules for buildings (eurocode 4)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules for buildings (eurocode 4)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules for buildings (eurocode 4)
TS EN 1997-1 / AC Geotechnical design - Part 1: General rules (eurocode 7)
TS EN 60335-2-21 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
TS EN 60311 / A2 Electric irons - For household and similar use - Methods for measuring performance
TS EN 934-4 Chemical additives for concrete, mortar and grout - Part 4: Grout additives for prestressing steel - Definitions, specifications, conformity, marking and labeling
TS EN 777-4 Heating systems - Radiant tube - Gas fired - Multi burners - Ceiling mounted - For outdoor use - Part 4: System h - Safety
TS EN 416-1 Heaters - Gas burner - Radiant tube - For outdoor use - Single burner - Ceiling mounted - Part 1: Safety
TS EN ISO 11691 Acoustics - Measurement of joint loss of flow-through duct silencers - Laboratory research method
tst 3419 Ventilation and air conditioning plants - Design rules
tst 3420 Rules for placing ventilation and air-conditioning systems
TS EN 1999-1-2 / AC Eurocode 9: Design of aluminum structures - Part 1-2: General rules - Structural fire design
TS EN 1999-1-2 / AC Eurocode 9: Design of aluminum structures - Part 1-2: General rules - Structural fire design
TS EN 60335-2-97 / A11 Safety regulations - Part for household and similar electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and the like
TS EN 1367-2 Tests for thermal and degradation properties of aggregates part 2: Magnesium sulfate test
TS EN 12390-6 Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of splitting test specimens
TS EN ISO 3822-3 / A1 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 60335-2-97 / A2 Safety regulations - Part for household and similar electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and the like
Safety regulations for household and similar electrical appliances
10077-1 / AC Thermal performance of windows, doors and louvers - Calculation of heat conduction - Part 1: Simplified method
10077-1 / AC Thermal performance of windows, doors and louvers - Calculation of heat conduction - Part 1: Simplified method
TS EN 14695 Flexible slabs - For waterproofing - Reinforced bitumen slabs for concrete bridge decks and other open traffic areas - Definitions and features
TS EN ISO 10456 / AC Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of declared and design thermal values
TS EN 60335-2-73 / A2 Safety regulations - For domestic and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
TS EN ISO 1452-1 Plastic pipe systems - for drinking and potable water - Used in underground and surface pressure sewage systems - Polyvinyl chloride (PVC-U) without plasticizer - Part 1: General
tst EN 13707 + A2 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and features
TS EN 806-4 Indoor installation - Specification for the transport of drinking and potable water - Part 4: Installation
TS EN 115-1 + A1 Safety for escalators and escalators - Part 1: Construction and installation
TS EN 196-8 Cement test methods - Part 8: Heat of hydration - Solution method
TS EN 196-9 Cement test methods - Part 9: Heat of hydration - Adiabatic method
TS EN 15304 Aerated concrete - Determination of resistance to freeze-thaw effect
TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN 81-31 Elevators - For the transport of persons and goods - Safety regulations concerning construction and installation - Part 31: Open hoists only
TS EN ISO 10426-1 / AC Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications
TS EN 249 Sanitary installations - Shower trays made of cross-linked cast acrylic plates - Specification and test methods
TS EN 806-4 Indoor installation - Requirements for the transport of potable and domestic water - Part 4: Installation
TS EN 1856-1 Chimneys - Rules for metal chimneys - Part 1: Ready chimney components
TS EN ISO 1452-5 Plastic pipe systems - Used for drinking and potable water, underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 5: suitability of the system
TS EN 62058-11 Electrical meters (aa) - Acceptance inspection - Part 11: General acceptance inspection methods
tst EN 62058-21 Electrical measuring instrument (aa) - Acceptance inspection - Part 21: Particular requirements for active energy for electromechanical meters
TS EN 62058-31 Electrical meters (aa) - Acceptance inspection - section 31: Static meters - For active energy - Special rules (class 0,2 s, 0,5 s, 1 s and 2 and class indices a, b, c)
TS ISO 3867 Combined anglomerate fungus (composite fungus) - Expansion joint filler materials - Test methods
TS EN 12350-8 Concrete - Fresh concrete tests - Part 8: Self-compacting concrete - Slump propagation test
TS EN 12350-9 Concrete - Fresh concrete tests - Part 9: Self-compacting concrete - V funnel test
TS EN 12350-11 Concrete - Fresh concrete tests - Part 11: Self-compacting concrete - Sieve separation test
TS EN 12350-12 Concrete - Fresh concrete tests - Part 12: Self compacting concrete - J ring test
TS EN 12629-1 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 1: General requirements
TS EN 12629-2 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 2: Block making machines
TS EN 12629-4 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - safety - Part 4: Machines for manufacturing concrete roof tiles
TS EN 1856-1 Chimneys - Requirements for metal chimneys - Part 1: Chimney system components
TS EN 1859 + A1 Chimneys - Metal chimneys - Test methods
TS EN 817 Sanitary fittings - Mechanical mixers (PN 10) - general specifications
TS EN 12405-1 + A2 Gas meters - Conversion devices - Part 1: Volume converter
tst HD 60364-6 Low voltage electrical installations - Part 6: Verification
TSE K 108 Asmolen blocks - Made of aerated concrete
TS EN 1634-3 / AC Fire resistance and smoke control tests - Openable windows and building hardware elements - Part 3: Smoke control test for doors and rolling shutters
TS EN ISO 1716 Fire reaction tests of building products - Determination of combustion temperature (calorific value)
TS EN 1997-2 / AC: 2010 Geotechnical design - Part 2: Soil survey and tests (eurocode 7)
TS EN 14151 Geosynthetics - Determination of explosion strength
TS EN 62058-21: 2010 Electrical meters (ac) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (class 0,5,1 and 2 and class a and b indexes)
TS EN 62058-31 Electrical meters (aa) - Acceptance inspection - Part 11: Particular requirements for static meters for active energy (class 0,2 s, 0,5 s, 1 and 2 and class indexes a, b and c)
TS EN 12350-8 Fresh concrete tests section 8: Self-compacting concrete- Sinking-Spreading test
TS EN 13141-2 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 2: Exhaust and air supply terminal assembly
TS EN 13941 + A1 Central heating - Design, installation of pre-insulated bonded pipe systems
TS EN 12629-5-3 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 5-3: Pre-stressed pipe production machines
TS EN 12629-6 + A1: 2010 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 6: Stationary and mobile equipment for the production of precast and reinforced products
TS EN 12629-7 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 7: Stationary and mobile equipment for series pre-stressed products
TS EN 12350-9 Fresh concrete tests section 9: Self-compacting concrete- Sump-V funnel test
TS EN 12350-11 Fresh concrete tests section 11: Self-compacting concrete- Sinking-Screening test
TS EN ISO 12567-1 Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 1: Complete windows and doors
TS EN ISO 12567-1 Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 1: Complete windows and doors
TS EN 13309: 2010 Construction machinery - Electromagnetic compatibility of machines with electrical internal power supply
tkt 201184265 Wood based interior door frame
TS EN 15599-1 Thermal insulation products for industrial insulation and building equipment-On-site thermal insulation from expanded perlite (ep) - Part 1: Pre-placement properties of bonded and filled materials
TS EN 15599-2 Thermal insulation products for industrial and building equipment-On-site thermal insulation from expanded perlite (ep) -Chapter 2: Properties of installed materials
TS EN 15600-1 Thermal insulation products for industrial insulation and building equipment-Thermal insulation applied at the place of use with scaly vermiculite (pv) products -Part 1: Pre-placement properties of bonded and filled materials
TS IEC 245-5 / T1 (Number modification, TS IEC 60245-5) Cables-Rubber insulated-Part with rated voltage up to 450 / 750 v 5: Lift cables
TS EN ISO 8394-2 Building construction-Joint materials-Part 2: Determination of the gushing property of joint sealants using standardized equipment
TS EN ISO 8394-1 Building construction-Joint materials-Part 1: Determination of the gushing properties of joint sealing materials
TS EN 1996-1-2 / AC Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN 1996-1-2 / AC Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN 61400-24 Wind turbines - Part 24: Protection against lightning
TS EN 13203-3 Solar-powered gas-burning devices-Indoor-Hot water-generating devices 500 liter water storage capacity and heat input 70kw-proof devices section 3: Inspection of energy consumption
TS EN 15643-1 Sustainability of construction works - Sustainable inspection of buildings - Part 1: General framework
TS EN ISO 15186-3 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 3: Laboratory measurements at low frequencies
TS EN ISO 15186-2 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 2: Area measurements
TS EN ISO 10140-3 Acoustics - Laboratory measurement of sound insulation in building elements - Part 3: Measurement of impact sound insulation
TS EN ISO 10140-2 Acoustics - Laboratory measurement of sound insulation in building elements - Part 2: Measurement of airborne sound insulation
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1994-1-1 / AC Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 1993-1-1 / AC Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 777-2 Heating systems - Radiant tube - Gas burning - Multi-burner - Ceiling mounted - For outdoor use - Part 2: System e - Safety
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (pe) - Part 1: General
TS EN 1555-2 Plastic piping systems - Used for the transport of gas fuels - Polyethylene (pe) - Part 2: Pipes
TS EN 1555-5 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene - Part 5: suitability of the system for its purpose
TS EN 15239 Ventilation for buildings - Energy performance in buildings - Guidelines for the inspection of ventilation systems
TS EN 15251 Indoor parameters for design and evaluation of energy performance of buildings - Indoor air quality, thermal environment, lighting and acoustics
TS EN 15316-2-1 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 2-1: Heat dissipation systems for space heating
TS EN 15316-3-2 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 3-2: Residential hot water systems-Distribution
TS EN 15316-3-3 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 3-3: Residential hot water systems - Production
TS EN 15316-2-3 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 2-3: Distribution systems for space heating
TS EN 15316-4-1 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 1: Heat generation systems for space heating - Combustion systems (boilers)
TS EN 15316-4-2 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 2: Heat generation systems for space heating - Heat pump systems
TS EN 15316-4-3 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-3: Heat generation systems - Thermal solar energy systems
TS EN 15316-4-4 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 4: Heat generation systems - Cogeneration systems integrated with the building
TS EN 15316-4-5 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 5: Production systems for space heating - Performance and quality of district heating and large volume systems
TS EN 15316-4-6 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 4 - 6: Heat generation systems - Photovoltaic systems
TS EN 15316-4-7 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4 - 7: Production systems for space heating - Biomass combustion systems
TS EN 1264-3 Surface-based water-based heating and cooling systems - Part 3: Sizing
TS EN 1264-4 Surface-based water-based heating and cooling systems - Part 4: Installation
TS EN 15378 Heating systems in buildings - Inspection of boilers and heating systems
TS EN 777-4 Heating systems - Radiant tube - Gas burning - Multi-burner - Ceiling mounted - For outdoor use - Part 4: System h - Safety
TS EN 777-3 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 3: System f - Safety
TS EN 777-1 Heating systems - Radiant tube - Gas burner - Multi-burner - Ceiling mounted - For outdoor use - Part 1: System d - Safety
tst HD 60364-7-712 Electrical installation in buildings - Part 7-712: Rules for special installations and locations - Solar photovaltaic (pv) power supply systems
TS EN 12059 + A1 Natural stone products - Dimensional stones - Requirements
TS EN 13170 + A1 Thermal insulation products for buildings - Factory made oak cork products (ICB) - Specifications
TSE CEN / TR 15177 Determination of freeze-thaw resistance of concrete - Structural internal damage
tst ISO 3934 Vulcanized and thermoplastic tires - Preformed gaskets for construction - Classification, determination and testing methods
TS EN 15316-4-8 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-8: Production systems for space heating, air heating and ceiling suspended radiant heating systems
TS EN 13126-9 Building hardware - Specification and test methods for windows and glazed doors - Part 9: Hardware for horizontal and vertical shaft windows
TS EN 12809 / T1 Boilers for residential heating systems for houses - Single, solid fuel, rated heat output up to 50 kw - Features and test methods
TS EN 13141-7 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 7: Performance tests of mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems designed for individual dwellings "
TS EN ISO 23993 Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity
TS EN 15551 + A1 Railway applications-Railway moving materials-Buffers
TS HD 60364-5-52 Electrical installation in buildings - Part 5-52: Selection and installation of electrical equipment-Drawn line systems (conductors)
TS EN 15080-12 Extended application of the results of fire resistance tests-Part 12: Load-bearing masonry walls
TS EN ISO 11925-2 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding
TS EN ISO 11925-2 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding
TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification
TS EN 1994-1-1 Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1994-1-1 Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
TS EN 1994-1-1 Design of steel and concrete mixed structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 4)
tst 10110 Asphalt distributor
tst 10202 Construction machinery-Concrete mixer
tst 9511 Construction and excavation machinery - Dumpers - Terms and general specifications
TS 13508 Estimation of concrete strength by maturity method
TS EN 81-41 Elevators - Safety regulations for construction and installation - Special elevators for transport of persons and goods - Part 41: Vertical lifting platforms for the use of people with mobility impairments
TS EN 13126-4 Building hardware - Connections for windows and glazed exterior doors - Specification and test methods - Part 4: Espagnolette bolts
TS EN 1367-5 Tests for thermal and degradation properties of aggregates - Part 5: Determination of resistance to thermal shock
TS EN ISO 16484-1 Building automation and control systems (bacs) - Part 2: Project specifications and harmonization
TS EN 12629-5-1 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate-Safety-Section 5-1: Vertical axis pipe production machines
TS EN ISO 15877-2: 2009 / A1 Plastic piping systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 2: Pipes
TS EN ISO 15877-5 / A1 Plastic pipe systems - For hot and cold water systems - Chlorinated poly (vinyl chloride) (pvc-C) - Part 5: Suitability of the system for its purpose
TS IEC 60050-826 International Electrotechnical Glossary - Part 826: Electrical Installations
TS EN 12464-1 Light and lighting - Lighting of workplaces - Part 1: Closed workplaces
TS EN 14647 Cement - Calcium aluminate - Composition, properties and conformity criteria
TS EN 14647 / AC Cement - Calcium aluminate - Composition, properties and conformity criteria
TS EN 62305-1 Lightning protection - Part 1: General rules
TS EN 62305-4 Lightning protection - Part 4: Electrical and electronic systems in buildings
TS EN 62305-3 Lightning protection - part 3: Physical damage to buildings and life-threatening
TS EN 12629-3 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 3: Sliding and rotary table machines
TS EN 12629-2 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 2: Machines for building blocks
TS EN 60335-2-21 / AC Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-21: Particular requirements for storage water heaters
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for storage water heaters TS EN 21-2003-2010: 2 / AC: 21
TS EN 594 Wooden structures - Test methods - Durability and durability of wooden frame wall plates against loads parallel to the planes
TS EN ISO 1452-3 Plastic pipe systems - For drinking and potable water - Used in underground and surface pressure sewage systems - Made of polyvinyl chloride (pvc-U) with no plasticizer added - Part 3- Fittings
TS EN 12371 Natural stones-Test methods-Determination of frost resistance
TS 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades
TS 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades
TS EN 15283-1 + A1 Gypsum boards reinforced with fibers - Definitions, requirements and test methods - Part 1: Gypsum boards reinforced with felt fibers
TS EN 1264-1 Floor heating and cooling systems - Water-based - part 1: Definitions and symbols
TS EN 673 Used in glass structures - Determination of heat conductivity (u value) - Calculation method
TS EN 12859 Gypsum blocks - Definitions, requirements and test methods
TS EN 15241 / AC Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
TS EN 15316-4-8 Heating systems for buildings - Method for calculating system efficiency and system energy requirements - Part 4-8: Space heat generation systems, technical combustion systems
TS EN 62305-1 Lightning protection - Part 1: General rules
TS EN 62305-4 Lightning protection - Part 4: Electrical and electronic systems in buildings
TS EN 12846-1 Bitumens and bituminous binders-Determination of flow time of bitumen emulsions with flow viscometer-Part 1: Bituminous emulsions
Safety regulations - For electrical appliances used in domestic and similar areas - Part 60335-2: Particular requirements for roasters, grills and similar portable cooking appliances
TS EN 16140 Natural stone test methods - Determination of sensitivity to changes in appearance caused by thermal cycles
TS EN 62305-3 Lightning protection - Part 3: Physical damage to buildings and life-threatening
TS HD 60364-5-54 Building electrical installations - Part 5: Selection and installation of electrical equipment - Part 54: Grounding arrangements and image protection conductors
TS EN 12808-4: 2009 / AC: 2011 Joint fillers - For tiles - Part 4: Determination of shrinkage
TS EN 15269-10 Comprehensive application of results from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 10: Fire resistance of steel roller shutter assemblies
TS EN ISO 21003-2: 2008 / A1 Multilayer pipe systems for indoor hot and cold water installations - Part 2: Pipes
TS 407 Concrete products - Flooring systems - suspended concrete block
TS EN 13126-4 Building hardware - Fasteners for windows and glazed exterior doors - Rules and test methods - Part 4: Espagnolette bolts
TS EN 15812 Polymer modified thick bituminous coatings for waterproofing - Determination of crack coverage
TS EN 15813 Polymer modified thick bituminous coatings for waterproofing - Determination of flexibility at low temperatures
TS EN 15816 Polymer modified bitumen thick covers for waterproofing - Resistance to rain
TS EN 15820 Polymer modified bitumen thick covers for waterproofing - Determination of waterproofness
TS EN 62561-4 Lightning protection system components (YKSB) - Part 4: Specification for conductor connectors
TS EN 197-1 Cement - Part 1: General cements - Composition, properties and conformity criteria
TS EN 1627 Door sets for pedestrians, windows, curtain walls, balustrades and shutters - Burglar resistant - Rules and classification
TS EN 772-11 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, gas concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
TS EN 772-11 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, gas concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
TS EN 544 Bituminous syringes - Mineral and / or synthetic reinforced - Product properties and test methods
TS EN ISO 11600 / A1 Building construction - Joint materials - Classification and requirements for sealing materials
TS 7363 Natural gas - Building indoor installation design and application rules
TS 10672-2 EN ISO 15875-2 / tst A1 -Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 2: Pipes
TS EN 1090-2: 2008 + A1 Steel and aluminum construction applications - Part 2 - technical requirements for steel structures
TS 10672-1 EN ISO 15875-1 / tst A1 -Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 1: General
TS EN 772-16 Heavy units - Test methods - Part 16: Determination of dimensions
8394-2: Clay geosynthetic barriers - Determination of permeability to gases
TS EN 50536 Lightning protection - Severe storm warning systems
TS EN 772-21: 2011 Masonry units - Test methods - Part 21: Determination of cold water absorption and water absorption of clay and silica sandstone masonry units
TS 12655 Steel doors, burglar resistant
TS EN 544 Bituminous syringes - Mineral and / or synthetic reinforced - Product properties and test methods
TS EN 1858 + A1 Chimneys - Components - Concrete chimney blocks
TS EN 50536 Lightning protection - Lightning storm warning systems
TS EN 115-2 Safety for escalators and escalators - Part 2: Rules for improving the safety of existing escalators and escalators
TS EN 12464-1 Light and lighting - Lighting of workplaces - Part 1: Indoor workplaces
TS EN 594 Timber - Test methods - Strength and durability of wooden framed panels against loads parallel to the planes
tst 496 The principles of natural ventilation of windows and bathrooms with chimneys
tst 2017 Modular coordination-Terms
TS 2020 Modular coordination principles and rules
TS EN 12649 Concrete compacting and leveling machines - Safety
Eurocode 1993: Design of steel structures - Part 1-3: General rules
Eurocode 1993: Design of steel structures - Part 1-3: General rules
TS EN 12390-3: 2009 / AC Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN ISO 11600: 2003 / A1 Building construction - Joint materials - Classification and requirements for sealing materials
TS EN ISO 13079 Laboratory glass and plastic materials - tubes for measuring erythroycin sedimentation rate by Westerngren method
TSE CEN / TS 81-76 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 76: Evacuation of disabled passengers using elevators
1999-1-3: 2007 / A1 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)
1999-1-3: 2007 / A1 Design of aluminum structures - Part 1-3: Fatigue-sensitive structures (eurocode 9)
TS EN 1999-1-4 / A1 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 1999-1-4 / A1 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 15331 Control and management of maintenance services for buildings, design criteria
TS EN 445 Sherbet - For prestressed tendons - Test methods
TS EN 62561-5 Lightning protection components (LPSC) - Part 5: Specification for ground electrode inspection enclosures and ground electrode seals
TS EN 446 Grout - for prestressed tendons - Grouting
TS EN 447 Sherbet - For prestressed tendons - Basic requirements
TS 13519 Determination of length change in concrete due to alkali silica reaction
TS 13517 Determination of potential alkali silica reactivity of binder materials and aggregate mixtures (accelerated mortar stick method)
TS 13516 Determination of potential alkali reactivity of aggregates (mortar stick method)
tst 7850 General rules for workplaces - Turkish baths
TS EN 15287-2 Chimneys - Design, installation and commissioning of chimneys - part 2: Chimneys for devices integrated into the room
TS EN 15287-1 + A1 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-chamber heating devices
TS 13518 Potential alkali reactivity of cement aggregate mixtures (mortar stick method)
TS EN 491 Concrete roof tiles and fittings for roofing and wall covering - Test methods
TS EN 15102: 2007 + A1 Decorative wallpapers in rolls and panels
TS EN 62561-6 Lightning protection components (lpsc) - Part 6: Specification for lightning impact counters (lsc)
TS EN 33 Closets and reservoirs - Connection sizes
TS EN 197-1 Cement - Part 1: General cements - Composition, properties and conformity criteria
TS EN 1998-2 / A2 Eurocode 8: Design of earthquake resistant structures - Part 2: Bridges
TS EN 12201-1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 1: General
TS EN 12201-3 + A1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 3: Fittings
TS EN 12201-5 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 5: suitability of the system for its purpose
TS EN 13126-2 Building fittings - Fittings for windows and high-glass doors - Rules and test methods - Part 2: Casement window handles
TS 12576 Urban roads - Design rules for structural measures and markings for accessibility at sidewalk and pedestrian crossings
TS EN 15221-3 Plant management - Part 3: Quality guide to plant management
TS EN 15221-4 Facility management - Part 4: Taxonomy, classification and structures in facility management
TS EN 15221-5 Facility management - Part 5: Guidance on facility management processes
TS EN 15221-6 Plant management - Part 6: Area and gap measurement in plant management
TS EN 15942 Sustainability of construction works - Environmental product declaration - Business to business communication format
TS EN 12390-3 / AC Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 1090-1: 2009 + A1 Steel construction applications - Part 1: Requirements for conformity assessment of structural components
TS 1261 Clay products - Flooring systems - Non-static clay block
TS EN 13126-1 Building hardware - Window and glass door hardware - Rules and test methods - Part 1: Common rules for all types of hardware
TS EN 13126-2 Building hardware - Requirements and test methods for windows and glazed doors - Part 2: Window handles
TS EN 13126-3 Building hardware - Window and glass door hardware - Rules and test methods - Part 3: Firstly double-opening, half-opening and pivoting window handles
tst EN 13126-5 Building hardware - Connection of windows and glazed doors - Features and test methods section 5: Devices limiting the opening of windows
TS EN 61821 Electrical installations - Lighting and marking of airports - Maintenance of fixed current series circuits used in aeronautical ground lighting
TS EN 13063-3 Chimneys - Chimney systems with clay / ceramic fume lining - Part 3: Test methods and specifications for air smoke duct chimney systems
TS 825 Thermal insulation rules in buildings
TS EN 806-5 Indoor installation - Specification for the transport of drinking and potable water - Part 5: Operation and maintenance
tst EN 1998-2 Earthquake resistant design - Part 2: Bridges
TS EN 12504-3 Concrete tests in buildings - Part 3: Determination of pulling load
TS EN 12504-4 Concrete tests - Part 4: Determination of ultrasonic pulsed wave velocity
TS EN 772-16 Masonry units - Test methods - Part 16: Determination of dimensions
TSE CEN / TS 772-22 Masonry units - Test methods - Part 22: Determination of freeze-thaw resistance of clay masonry units
TS EN 15316-3-1 Heating systems for buildings - Method of calculating system efficiency and energy requirements of the system - Part 3-1: Residential hot water systems - Determination of requirements (hot water consumption conditions)
TS EN 772-18 Paper units - Test methods - Part 18: Determination of freeze-thaw resistance in lime sandstone masonry units
TS EN 15726 Ventilation for buildings - Air breathing - Measurements in the area covered by air-conditioned / ventilated rooms for the evaluation of thermal and acoustic conditions
TS EN 1998-2 Design of earthquake resistant structures - Part 2: Bridges (eurocode 8)
TS EN 1998-2 / A1 Design of earthquake resistant structures - Part 2: Bridges (eurocode 8)
TS EN 1998-2 / AC Design of earthquake resistant structures - Part 2: Bridges (eurocode 8)
TS EN 933-3 Tests for geometric properties of aggregates part 3: Determination of grain shape flatness index
TS EN 12839 Precast concrete products - Fence elements
TS EN 14844: 2006 + A2: 2011 Prefabricated concrete products - Box lattices
TS EN 15643-3 Sustainability of buildings - Assessment of buildings - Part 3: Basis for social performance assessment
TS EN 15643-4 Sustainability of buildings - Assessment of buildings - Part 4: Main principles for economic performance assessment
TS EN 13126-3: 2011 Building hardware - Requirements and test methods for windows and glazed doors - Part 3:
TSE K 143 Clay masonry units with insulation layer
TSE K 143 Clay masonry units with insulation layer
Safety regulations - For household and similar electrical appliances - Part 7936-60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers
TS 13546 Concrete tests in buildings - Use of electromagnetic concrete thickness gauge
TS 13537 Test method for determination of sinking resistance of hardened concrete
TS EN 13172 Thermal insulation products - Conformity assessment
TS EN 806-5 Indoor installation - Features for the transport of drinking and potable water -Part 5: Operation and maintenance
TS EN 932-5 Tests for general properties of aggregates - Part 5: General instruments and calibration
TSE CEN / TS 1451-2 Plastic pipe systems -Polypropylene (pp) used for disposal of cold and hot waste water in the building -Chapter 2: Conformity assessment guide
TSE CEN / TS 1519-2 Plastic pipe systems -Used for disposal of indoor waste water -Pietylene (pe) -Chapter 2: Conformity assessment guide
TS EN 1744-7 Tests for chemical properties of aggregates - Part 7: Determination of combustion loss of aggregate (MIBA aggregate) in municipal ash incinerator
TS EN ISO 3382-3 Acoustics - Measuring room acoustic parameters - Part 3: Open plan offices
TS EN 60335-2-51: 2003 / A2 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-51: Particular requirements for fixed circulation pumps in heating and domestic water systems
TS EN ISO 10077-2 Thermal performance of doors, windows and shutters - Calculation of thermal conduction - Part 2: Numerical method for safes
TS EN ISO 10077-2 Thermal performance of doors, windows and shutters - Calculation of thermal conduction - Part 2: Numerical method for safes
TS EN 62056-46 / A1 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - Part 46: Data link layer using Hdlc protocol
TS EN 13126-1 Building hardware - Requirements and test methods for windows and glazed exterior doors - Part 1: Common rules for all types of hardware
TS EN 1457-1 Chimneys - Chimneys with smoke lining clay / ceramics - Part 1: Fume duct linings operating in dry conditions - Requirements and test methods
TS EN 1457-2 Chimneys - Chimneys made of clay / ceramic with smoke lining - Part 2: Wet lining under wet conditions - Requirements and test methods
TS EN 14630 Concrete structures - Products and systems for protection and repair - Test methods - Determination of carbonation depth in hardened concrete by phenolphthalene method
TS EN 1504-9 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 9: General principles for the use of products and systems
TS EN 13224: 2011 Precast concrete products - Threaded pavers
TS HD 60364-7-709: 2009 / A1 Low voltage electrical installations - Part 7 - 709: Specification for special installations or locations - For marinas and similar
TS EN 1024 Roof tiles made of clay - Determination of non-continuous geometric properties
TS EN 1024 Roof tiles made of clay - Determination of non-continuous geometric properties
TS EN 15050 + A1 Precast concrete products - Bridge elements
TS EN 58 Bituminous binders - Sampling
TS EN ISO 13791 Thermal performance in buildings - Calculation of temperature in a room without mechanical cooling - General criteria and verification procedures
TS EN 1428 Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method
TS EN 1745 Masonry and masonry products - Methods for determination of thermal properties
TS EN 1745 Masonry and masonry products - Methods for determination of thermal properties
TS 13540 Standard test method for corrosion potential of unprotected reinforcing steel in concrete
TS EN 594 Wooden structures - Test methods - Durability and durability of wooden frame wall plates against loads parallel to the planes
TS EN 15882-1 Comprehensive application of results from fire resistance tests in service facilities - Part 1: Channels
TS EN 1467 Natural stones - Raw blocks - Specifications
TS EN 1468 Natural stones - unprocessed boards - Specifications
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 14617-4 Agglomerated stones - Test methods - Part 4: Determination of abrasion resistance
TS EN 14617-5 Agglomerated stones - Test methods - Part 5: Determination of freezing and melting resistance
TS EN 14617-6 Agglomerated stones - Test methods - Part 6: Determination of resistance to thermal shock
TS EN 14617-10 Agglomerated stones - Test methods - Part 10: Determination of chemical resistance
TS EN 14617-12 Agglomerated stones - Test methods - Part 12: Determination of dimensional stability
TS HD 60364-5-559 Electrical installation in buildings - Part 5-559: Selection and installation of electrical equipment - Luminaires and lighting installations
TS 39 / tstT3 Paints-Organic solvent based-Topcoat
TSE K 163 Expanded polystyrene (eps) products - Flooring systems - Non-static eps block
TS EN 1112 Sanitary fittings - Shower heads for Type 1 and Type 2 water supply systems - General specifications
TS EN 1906 Building hardware - Door handles and knobs - Rules and test methods
TS HD 60364-7-710 Low voltage electrical installations -Chapter 7-710: Rules for special facilities and places- Medical spaces
TSE K 154 Thermal insulation board - For buildings - Ceramic foam based
TSE K 154 Thermal insulation board - For buildings - Ceramic foam based
TS 8737 Building license
TS 10970 Forms - Building Permit
TS 13264 Forms - Burning and demolished structures form
TS EN 15050: 2007 + A1 Precast concrete products - Bridge elements
TS EN 303-5 Boilers - Part 5: Solid fuel boilers, manual and automatic loading, rated heat output up to 500 kW - Terms and definitions, requirements, tests and marking
TS EN 480-8: 2012 (EN) Chemical additives - Test methods for concrete, mortar and grout - Part 8: Determination of solids content
TS EN 1425 Bitumen and bituminous binders - Determination of sensory properties
TS EN 1906 Building hardware - Door handles and knobs - Specifications and test methods
TS EN 13126-13 Building hardware - Connection of windows and glazed doors - Features and test methods section 13: Sash balancers
TS EN 13126-14 Building hardware - Connection of windows and glazed doors - Specification and test methods section 14: Sash fasteners
TS EN 1112 Sanitary fittings - Hand showers - Used in coils - Rated pressure pn10
TS EN 1555-5 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene (PE) - Part 5: suitability of the system for its purpose
TS EN 1999-1-4 / AC Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 1999-1-5 / AC Design of aluminum structures - Part 1-5: Shell structures (eurocode 9)
TS EN ISO 9047 / AC Building construction - Joint materials - Determination of adhesion / cohesion properties of sealing materials at various temperatures
TS EN 14769 Bituminous and bituminous binders - Accelerated long-term aging process with pressurized aging container (pav)
TS EN 14770 Bitumen and bituminous binders - Complex cutting module and determination of phase angle - Dynamic cutting rheometer (dsr)
TS EN 14771 Bitumen and bituminous binders - Determination of creep rigidity in bending - Bending beam rheometer (bbr)
TS 13539 Standard test method for measuring concrete layer thickness and p-wave velocity using Pulse-Echo method.
TS ISO 12491 Quality control statistical methods of building materials and components
tst prEN 15101-1 Thermal insulation products for buildings - Loose-filled cellulose products on site - Part 1: Specifications for products before installation
tst prEN 15101-2 Thermal insulation products for buildings - Loose-filled cellulose products on site - Part 2: Specification for finished products after installation
TS EN 13967 Flexible sheets - For waterproofing - Plastic and rubber damp insulation boards, including plastic and rubber sheets for bundling insulation in basements - Definitions and features
TS EN 13596 Flexible sheets for waterproofing - Insulation of bridge deck concretes and other concrete surfaces open to traffic - Determination of bond strength
TSE K 170 Hinged and sliding mosquito nets for windows and doors
TS EN 50379-3 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances Part 3: Performance requirements for devices used in the illegal service of gas-fired heating appliances
TS EN 62337 Commissioning of control systems and electrical equipment in the process industry - Specific phases and main considerations
TS EN 62337 Commissioning of control systems and electrical equipment in the process industry - Specific phases and main considerations
TS 5228-2 EN 234 / T1 Wall coverings - In rolls - Decorated later - Features
TSE CEN / TR 15840 Conformity assessment of fly ash used in concrete - Guidelines for the application of EN 450-2
TS EN 1024 Roof tiles - Made of clay - Discontinuous (overlap) - Determination of geometric properties
TS EN 81-41 Elevators - Safety regulations for construction and installation - Special elevators for the transport of persons and goods - Part 41: Vertical lifting platforms for the use of people with mobility impairments
TS EN 62059-32-1 Electrical measuring equipment - Dependency - Section 32-1: Durability - Stability test of metrological characteristics by applying elevated temperature
TS HD 60364-5-56: 2010 / A1: 2011 (EN) Electrical installation in buildings - Part 5: Selection and installation of electrical equipment group 56: Security services
TSE K 179 Lift rail clamping system
TSE K 169 Plastic pipe systems - Used for the disposal of cold and hot wastewater in the building - Made of mineral doped polypropylene (pp) material - Soundproof pipes, fittings and system features
TSE K 175 Mineral and acrylic based composite systems - used for thermal insulation
TS 13565 Insulated laminated sandwich lightweight units
TS 13566 Cement-based adhesives - for thermal insulation board
TS 407 / T1 Concrete products - Flooring systems - Asmolene lightweight concrete block that does not participate in static work
TS 3440 Evaluation of water, soils and gases with harmful effects to concrete - Principles, limit values, sampling and analysis of water and soils
TS 2518 Test method for determination of Portland cement dosage in hardened concrete
TS 2810 Building construction - Joint sealing materials - Rubber waterstop seals
TS 3262 Test method for the determination of abrasion resistance in concrete by sandblasting
TS EN 50379-2 Specification for portable electrical devices designed to measure the combustion flue gas parameters of heating appliances part 2: Performance requirements for legal examinations and assessment devices
TS EN 15232: 2012 (EN) Energy performance of buildings - Estimated results of building automation, control and building management
TS HD 60364-4-444: 2010 / AC: 2012 (EN) Low voltage electrical installations - Part 4 - 44: Protection for safety -: protection against voltage and electromagnetic disturbances
TS EN 1856-2 Chimneys - Requirements for metal chimneys - Part 2: Metal chimney linings and chimney connection pipes
TS EN 62137-3 Electronic installation technology - Part 3: Selection of guidelines for environmental and strength tests for solder joints
TS EN 50536 / A1 Lightning protection - Lightning storm warning systems
TS EN 12201-4 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
TS EN 1555-4 Plastic piping systems - For the transport of gas fuels - Polyethylene (PE) - Part 4: Valves
TS HD 60364-7-710 Low-voltage electrical installations - Part 7-710: Requirements for special installations or spaces - Medical premises
TS EN ISO 10140-2 Acoustics - Measurement of sound insulation of structural elements in the laboratory - Part 2: Measurement of airborne sound insulation
TS EN ISO 10140-3 Acoustics - Measurement of sound insulation of structural elements in the laboratory - Part 3: Measurement of impact sound insulation
TS EN ISO 10140-4 Acoustics - Measurement of sound insulation of structural elements in the laboratory - Part 4: Measurement procedures and rules
TS EN ISO 10848-1 Acoustics - Laboratory measurement of lateral transmission of airborne sound and impact sound between adjacent rooms - Part 1: Framework document
TS EN ISO 10848-2 Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory
TS EN ISO 10848-3 Acoustics - Laboratory measurement of lateral transmission of air-borne sound and impact sound between adjacent rooms
TS EN ISO 10848-4 Acoustics - Laboratory measurement of lateral sound and airborne sound transmission between adjacent rooms - Part 4: Application for connections with at least one heavy element
TS 3455 Determination of permeability coefficient in concrete
tst 2749 Stoves (of ceramics)
TS EN 12828 + A1 Heating systems - Buildings - Design of water-operated heating systems
TS EN 50379-1: 2012 (EN) Specification for portable electrical apparatus designed to measure flue gas combustion parameters of heating devices - Part 1: General requirements and test methods
TS EN 12828 + A1 Heating systems - Buildings - Design of water-operated heating systems
TS EN 50379-1: 2012 (EN) Specification for portable electrical apparatus designed to measure flue gas combustion parameters of heating devices - Part 1: General requirements and test methods
TS 1261 / T1 Clay products - Flooring systems - Non-static clay block
TS EN 1015-6 / A1 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar
TS EN ISO 10140-5 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for plant and test equipment for testing
TS 13586 Strength evaluation of existing reinforced concrete buildings
TS EN 1015-9 / A1 Masonry mortar - Test methods - Part 9: Determination of the processing and correction time of fresh mortar
TS EN 1015-10 / A1 Masonry mortar - Test methods - Part 10: Determination of the hollow dry unit volume of hardened mortar
TS EN 1015-11 / A1 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar
TS EN 1015-19 / A1 Masonry mortar - Test methods - Part 19: Determination of water vapor permeability of hardened plaster and masonry mortar
TS EN 12617-4 Concrete structures - Test methods for products and systems for protection and repair - Part 4: Determination of shrinkage and expansion
TS EN 12372 Natural stones - Test methods - Determination of bending strength under heavy loads
TS EN 1926 Natural stones - Test methods - Determination of uniaxial compressive strength
TS EN 12407 Natural stones - Test methods - Petrographical investigation
TS EN 12808-3 Joint fillers - For tiles - Part 3: Determination of flexural and compressive strength
TS EN 12808-2 Joint fillers - For tiles - Part 2: Determination of abrasion resistance
TS EN 12808-4 Joint fillers - For tiles - Part 4: Determination of shrinkage
TS EN 12808-5 Joint fillers - For tiles - Part 5: Determination of water absorption
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS EN ISO 3382-1 Acoustics - Measurement of acoustic parameters of rooms - Part 1: Showrooms (ISO 3382-1-2009)
ISO EN ISO 3382-2 Acoustics - Measurement of acoustic parameters of rooms - Part 2: Tinnitus time in ordinary rooms (ISO 3382-2-2008)
ISO EN ISO 3382-3 Acoustics - Measuring acoustic parameters of rooms - Part 3: Open offices (ISO 3382-3-2012)
TS EN ISO 3382-2 / AC Acoustics - Measurement of acoustic parameters of rooms - Part 2: Tinnitus time in ordinary rooms
TS 202 / T1 Ceramic tiles - Tiles
TSE K 136 / Revision Thermal and waterproofing products - Used in buildings - Polyurethane and Polypropylene
TSE K 137 / Revision Thermal and waterproofing products - Used in buildings - Polyurethane and polyester
TS EN 1634-1 Fire resistance and smoke control tests for doors and rolling shutters, windows and elements of building hardware - Part 1: Fire resistance test for doors and rolling shutters and opening windows
TS EN 1634-2 Fire resistance and smoke control tests for doors, rolling shutters and window fittings and building hardware elements - Part 2: Test for characterizing fire resistance for building hardware elements
TS 13619 Guide for pre-repair evaluation of reinforced concrete structures
TS EN 62305-3 / tst A11 Lightning protection - Part 3: Physical damage to buildings and life-threatening
TS 13606 Tensile strength of concrete surfaces and test method for determination of bond strength or tensile strength of concrete repair and coating materials by direct tensile method (pull-off method)
TS 13607 Loading tests of concrete structures-methods, test load size, test procedures and acceptance criteria
TS 13609 Test method for the evaluation of asphalt-paved reinforced concrete bridge decks using soil radar (GPR) technique
TS EN 13412 Concrete structures - Products and systems for protection and repair - Test methods - Determination of modulus of elasticity in pressure
TS EN 1015-18 Masonry mortar - Test methods - Part 18: Determination of water absorption coefficient of hardened mortar due to capillary effect
TS EN 12599 Ventilation in buildings - Test procedures and measurement methods on ventilation and air conditioning systems
TS EN 14706 Thermal insulation products for building equipment and industrial installations - Determination of the maximum service temperature
TS EN 14707 Thermal insulation products for building equipment and industrial installations - Determination of the maximum service temperature for pre-formed pipe insulation
TS EN 232 Tubs - Connection dimensions
TS EN 251 Shower trays - Connection dimensions
TS EN ISO 12631 Thermal performance of curtain wall - Calculation of thermal permeability
TS EN 13469 Thermal insulation products - For building equipment and industrial plants - Determination of water vapor permeability properties of preformed pipe insulation products
TS EN 13472 Thermal insulation products - For building equipment and industrial plants - Determination of short-term water absorption by partial immersion of pre-formed pipe insulation products
TS EN 15221-7: 2012 (EN) Facility management-Part 7: Guide for performance comparison
TS EN 15732 Lightweight filler and thermal insulation products - For civil engineering structures - Expanded clay lightweight aggregate products
TS EN 16005 Motor-driven door sets - For pedestrians - Safety in use - Requirements and test methods
TS EN ISO 10545-16 Ceramic tiles - Part 16: Determination of small color differences
TS EN ISO 10545-6 Ceramic tiles section 6: Determination of deep wear resistance in unglazed tiles
TS EN 62561-7 Lightning protection system components (lpsc) - Part 7: Features for improvement of grounding components
TS EN ISO 13792 Thermal performance in buildings - Calculation of temperature in a room without mechanical cooling in summer - Simplified methods
TS EN 933-1: 2012 (EN) Tests for geometric properties of aggregates part 1: Determination of particle size distribution - Screening method
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 14909 Flexible sheets for waterproofing - Plastic and rubber waterproofing sheets - Definitions and features
TS EN 12405-2 Gas meters - Conversion devices - Part 2: Energy converter
TS EN 15700 Safety of conveyor belts for winter sports and free use
TS EN 62305-2 Lightning protection - Part 2: Risk management
TS EN ISO 25745-1 Energy performance for elevators, escalators and moving conveyors - Part 1: Energy measurement and validation
TS EN 50536 / A1 Lightning protection - Lightning storm warning systems
TS EN 12320 Building Hardware-Padlocks and Lock Connections-Features and test methods
TS EN 15684 Building Equipment-Mechatronic cylinders-Features and test methods
TS EN 13126-19 Building equipment - Specification and test methods for windows and high-glass doors - Part 19: Slip closing device
TS ISO 13781: 2012 (EN) Flexible hose fittings in drinking water installations - Functional features and test methods
TS EN 81-21 + A1 Elevators - For the transport of persons and cargo - Safety rules for construction and installation - Part 21: New elevators for the transport of people and goods / people in existing buildings
TS EN 12001 Conveying, spraying and placing machines for concrete and mortar - Safety regulations
TS EN ISO 19432 Machinery and equipment - Used in building construction - Portable, manually operated, internal combustion engine driven cutting machines - Safety requirements and tests
TS EN 60335-2-67 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-67: Particular requirements for commercially used soil tillage and floor cleaning machines
TS EN 450-1 Fly ash - Used in concrete - Part 1: Description, specifications and conformity criteria
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TS EN 13084-7 Chimneys - Free standing - Section 7: Technical specifications for cylindrical steels for single-walled steel chimneys and steel linings
TS EN 13956 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and features
TS 13620 Test method for determination of unit deformation in hardened concrete
tst 201391944 Guideline for non-destructive testing methods applied near the surface and used to assess concrete strength
TS 13610 Test method for determining the first superficial water absorption of concrete
TS EN 12354-5 Building acoustics - Calculation of acoustic performance of structures from the performance of elements - Part 5: Sound levels from service equipment
TS EN 12354-5 / AC Building acoustics - Calculation of acoustic performance of buildings from the performance of elements - Part 5: Sound levels from service equipment
TS EN ISO 15186-1 Measurement of sound insulation in buildings and building elements using acoustic-sound intensity - Part 1: Laboratory measurements (ISO 15186-1: 2000)
TS EN ISO 15186-2 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 2: Measurements in structure (ISO 15186-2: 2003)
ISO EN ISO 15186-3 Acoustics - Measurement of sound insulation in buildings and building elements using sound intensity - Part 3: Laboratory measurements at low frequencies (ISO 15186-3: 2002)
TS EN ISO 10848-2 / AC Acoustics - Laboratory measurement of lateral transmission of air-borne sound and impact sound between adjacent rooms - Part 2: Application for lightweight elements in cases where the coupling effect is low
tst IEC 60050-845 International Electrotechnical Glossary-Section 845: Lighting
TS 13632 Test method for measuring the dynamic modulus of elasticity
TS ISO 4190-1 Elevators - Placement-related dimensions - Part 1: Class I, Class II, Class III and Class VI elevators
TS EN 14992 + A1 Precast concrete products - Wall elements
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TS EN 1467 Natural stones - Raw blocks - Specifications
TS EN 1468 Natural stones - Untreated plates - Specifications
TS EN 15570 Furniture fittings - Strength and durability of hinges and hinge elements - Hinges rotating about a vertical axis
tst 12655 Steel doors - burglar resistant
TS EN 303-5 Boilers-Section 5: Solid fuel boilers with manual and automatic loading, rated heat power up to 500 kw-Terms and recipes, specifications, tests and marking
TS ISO 1791 Building construction - Modular compatibility - Terms
TS 13592 Authorized services - Rules for hydraulic systems for power transmission
TS EN 12159 Construction cranes - For transporting personnel and materials - Vertical guide rail, with cab
TS EN 13126-19 Building hardware - Specification and test methods for windows and glazed doors - Part 19: Slip closure device
TS EN 62305-2 Lightning protection - Part 2: Risk management
TS EN 14618 Agglomerate stones - Terms and classification
TS EN 15388 Agglomerated stones - Plates and dimensional products for bathroom and kitchen worktops
TS EN 14617-1 Agglomerated stones - Test methods - Part 1: Determination of apparent density and water absorption
TS EN 1858 + A1 Chimneys - Components - Concrete chimney blocks
TS ISO 13442 Tires and wheels for construction equipment
TS EN 13583 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to impact impact of solid grains
10077-2 / AC Thermal performance of doors, windows and louvers - Calculation of thermal conductivity - Part 2: Numerical methods for frames
10077-2 / AC Thermal performance of doors, windows and louvers - Calculation of thermal conductivity - Part 2: Numerical methods for frames
TS EN 1991-1-2: 2002 / AC European rule 1 - Design and impact principles of buildings - Part 1-2: Building effects - Effects on structures exposed to fire
1991-1-6: 2005 / AC Impacts on structures - Part 1-6: General effects - Impacts during construction (eurocode 1)
TS EN 1991-4: 2006 / AC Eurocode 1: Design and effect of structures - Part 4: Silo and tank effects
TS EN 1991-4: 2006 / AC Eurocode 1: Design and effect of structures - Part 4: Silo and tank effects
1996-1-1: 2005 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (eurocode 6)
1996-1-1: 2005 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (eurocode 6)
TS EN 846-5 Masonry - Auxiliary components - Test methods - Part 5: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (double test)
TS EN 846-5 Masonry - Auxiliary components - Test methods - Part 5: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (double test)
TS EN 846-6 Masonry - Auxiliary components - Test methods - Part 6: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (single-end test)
TS EN 846-6 Masonry - Auxiliary components - Test methods - Part 6: Determination of tensile and compressive load capacity and load-displacement properties of wall ties (single-end test)
TS EN 15269-2 Application of test results for openable window assemblies, fire resistance and / or smoke control including extended doors, shutters and building hardware elements - Part 2: fire resistance of hinged and pivoted steel door sets
TS EN 12390-1 Concrete - Hardened concrete tests - Part 1: Shape, size and other properties of test specimens and molds
TS EN 12504-2 Concrete tests in buildings - Part 2: Non-destructive testing - Determination of the number of bounces
TS EN 15254-7 Extended application of results from fire resistance tests - Non-load-bearing ceilings - Part 7: Metal sandwich panel construction
TS EN 12327 Gas supply systems - Pressure test, commissioning and decommissioning - Functional requirements
1264-2: 2008 + A1: 2012 Floor-mounted hot-water heating systems part 2: Floor heating: Evidence methods for determination of thermal power using calculation and test
TS EN 1191 Windows and doors - Resistance to repeated opening and closing - Test method
TS EN 62561-1 Lightning protection system components (YKSB) - Part 1: Specification for fasteners
TS EN 1991-3: 2006 / AC Impacts on structures - Part 3: Effects of cranes and construction equipment (eurocode 1)
TS EN 62561-2 Lightning protection system components (YKSB) - Part 2: Specification for conductors and grounding electrodes
TS EN ISO 12569 Thermal insulation of buildings- Determination of air change in buildings- Tracer gas method
TS EN 62561-3 Lightning protection system components (YKSB) - Part 3: Specification for spark gap insulation gaps
TS EN ISO 13788 Thermal performance of building components and building elements in humid environment - Internal surface temperature to prevent critical surface moisture and condensation inside building components - Calculation methods
TS EN 846-7 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics (couplet test for mortar joint connections)
TS EN 15269-3 Extended application of test results for fire resistance and / or smoke control for doors, shutters and openable window components, including elements of building equipment - Part 3: Fire resistance of hinged or revolving wooden door sets and openable wooden frame windows
TS EN 846-14 Test methods for masonry auxiliary components - Part 14: Determination of initial shear strength between the top of the wall and the prefabricated part of the composite lintel
TS EN 1744-1: Tests for chemical properties of aggregates - Part 2009: Chemical analysis
TS EN 1013-2 Plastic profile sheets - Transmissible - For single-layer roof coverings - Part 2: Properties and test methods of fiberglass reinforced polyester resin (ctp) sheets
TS EN 16345 Bitumen and bituminous binders - Bituminous emulsions - Determination of flow time - Redwood no. II Using Viscometer
TS EN 14024 Metal profiles - Thermal insulation - Mechanical properties - Requirements assessment and tests
TS EN 14024 Metal profiles - Thermal insulation - Mechanical properties - Requirements assessment and tests
TS EN 12211 Oil, petrochemical and natural gas industry - Spiral surface heat exchangers
TS EN 12405-2 Gas meters - Conversion devices - Part 2: Energy converter
TS EN 13161 Natural stones - Test methods - Determination of bending strength under constant moments
TS EN 13971 Carbonated calcification agents - Determination of reactivity - Potentiometric titration method with hydrochloric acid
TS EN 13755 Natural stones - Test methods - Determination of water absorption at atmospheric pressure
TS EN 13126-9 Building hardware - Connection of windows and glazed doors - Specification and test methods section 9: Rotary axis hinges
TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor wear
TS EN 16145: 2012 Sanitary fittings - Removable headers for kitchen sinks and basin mixers - General specifications
TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression
TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus
TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient
TS EN 14146 Natural stones - Test methods - Determination of dynamic elasticity modulus (by measuring basic resonance frequency)
TS EN 16445 Ventilation for buildings - Air diffusion - Aerodynamic testing and evaluation for mixed flow application: non-isothermal process for cold jet
TS EN 13142 Ventilation in buildings - Components / products for residential ventilation - Mandatory and optional performance characteristics "
TS EN ISO 29462 Field tests of general ventilation filtration devices and systems on site with removal efficiency and resistance to air flow of particle size
TS EN ISO 10121-2 Test methods for the examination of gas phase air purifying media performance and apparatus for general ventilation - Part 2: Gas phase air purifiers (GPACD)
TS EN 13225 Precast concrete products - Structural bar elements
TS EN 13369 Precast concrete products - General rules
TSE CEN / TS 12666-2 Plastic pipe systems - For unpressurized groundwater and drainage - From polyethylene (pe) - Part 2: Conformity assessment guide
TSE CEN / TS 1555-7 Plastic pipe systems - For the transport of gas fuels - Made of polyethylene (pe) - Part 7: Conformity assessment guide
TSE CEN / EN 16443: 2013 EN 450-1: 2005 + A1 revision history: 2007 - Fly ash for concrete
TS EN ISO 717-2 Acoustics - Evaluation of sound insulation in building elements and buildings - part 2: Impact sound insulation
TS EN ISO 15874-1 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 1: General
TS EN ISO 15874-2 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 2: Pipes
TS EN ISO 15874-3 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 3: Fittings
TS EN ISO 15874-5 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 5: System suitability
TS EN 594 Timber - Test methods - Strength and durability of wooden framed panels against loads parallel to the planes
TS EN 1013-2 Plastic profile sheets - Transmissible - For single-layer roof coverings - Part 2: Properties and test methods of fiberglass reinforced polyester resin (ctp) sheets
TS EN 1527 Construction hardware - Hardware for sliding and accordion doors - Specification and test methods
TS EN 12428 Doors - Used in industrial and commercial buildings and garages - Thermal conductivity - Data required for calculation
TS EN 12428 Doors - Used in industrial and commercial buildings and garages - Thermal conductivity - Data required for calculation
TS EN 14315-1 Thermal insulation products - For buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam spray products prepared on site - Part 1: Particularly for rigid foam spraying system prior to application
TS EN 14318-1 Thermal insulation products for buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam distributed on site - Part 1 Before application Specification for rigid foam dispensing system
TS EN 14318-2 Thermal insulation products for buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products distributed on site: Part 2 Specification for applied insulation products
TS EN 14319-1 Thermal insulation products for building equipment and industrial applications - Rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 1 Characteristics of rigid foam distribution system before application
TS EN 14319-2 Thermal insulation products for building equipment and industrial applications - Hard polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 2 Properties of applied insulation products
TS EN 14320-1 Thermal insulation products for building equipment and industrial applications - Rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 1 Characteristics of rigid foam distribution system before application
TS EN 14320-2 Thermal insulation products for building equipment and industrial applications - Hard polyurethane (PUR) and polyisocyanurate foam (PIR) products distributed on site: Part 2 Properties of applied insulation products
TS EN 1998-1: 2004 / A1 Eurocode 8: Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings
TS EN 1998-1: 2004 / A1 Eurocode 8: Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings
TS EN 13984 Flexible sheets - For waterproofing - Plastic and rubber sheets for water vapor control - Definitions and features
TS EN 502 Roofing sheets - Metal - Fully fitted - Stainless steel sheet -
TS EN 505 Roofing sheets-Metal-Fitting-Steel plate-Features
TS EN 822 Thermal insulation materials for buildings - Determination of length and width
TS EN 823 Thermal insulation materials for buildings - Determination of thickness
TS EN 824 Thermal insulation materials-Determination of deviation from the square for buildings
TS EN 825 Thermal insulation materials for buildings - Determination of surface flatness
TS EN 826 Thermal insulation products - For buildings - Determination of pressure behavior
TS EN 1602 Thermal insulation materials for buildings - Determination of apparent density
TS EN 1603 Thermal insulation materials for buildings - Determination of dimensional stability under constant normal laboratory conditions (23 c /% 50 relative humidity)
TS EN 1859 + A1: 2013 Chimneys - Metal chimneys - Test methods
TS EN 1604 Thermal insulation materials for buildings-Determination of dimensional stability under certain temperature and humidity conditions
TS EN 1605 Thermal insulation materials for buildings-Determination of deformation under certain pressure load and temperature conditions
TS EN 1606 Thermal insulation materials for buildings Determination of creep under pressure
TS EN 1607 Thermal insulation materials for buildings - Determination of tensile strength perpendicular to surfaces
TS EN 1608 Thermal insulation materials - For buildings - Determination of tensile strength parallel to surfaces
TS EN 1608 Thermal insulation materials - For buildings - Determination of tensile strength parallel to surfaces
TS EN 1609 Thermal insulation materials - For buildings - Determination of short-term water absorption by partial immersion
TS EN 12085 Thermal insulation materials for buildings - Determination of linear dimensions of test specimens
TS EN 12086 Thermal insulation materials - Thermal insulation materials - For buildings - Determination of water vapor permeability
TS EN 12087 Thermal insulation materials for buildings - Determination of long term water absorption by immersion
TS EN 12088 Thermal insulation materials for buildings - Determination of water absorption due to long-term diffusion by immersion
TS EN 12089 Thermal insulation materials for buildings - Determination of bending behavior
TS EN 12089 Thermal insulation materials for buildings - Determination of bending behavior
TS EN 12430 Thermal insulation materials for building applications - Determination of behavior under point load
TS EN 12431 Thermal insulation materials for buildings - Determination of thickness for suspended ceiling materials
TS EN 1109 Flexible sheets - For waterproofing - Bituminous sheets for roof waterproofing - Determination of flexibility at low temperature
TS EN 16035: 2012 Hardware performance document (HPS) - Determination and summarization of experimental evidence for fire resistance and / or smoke control door systems and / or openable window applications for the common use of building hardware
TS EN 14157 Natural stones - Determination of wear resistance
TS EN 14158 Natural stones - Test methods - Determination of breaking energy
tst EN 14205 Natural stones - Test methods - Determination of knoop hardness
TS EN 16140 Natural stones - Test methods - Determination of sensitivity to changes in appearance caused by thermal cycles
TS EN 13126-6 Building hardware - Windows and glass doors - Features and test methods - Part 6: Variable geometry of friction or friction hinges
TS EN 13126-13 Building hardware - Specification and test methods for windows and glazed doors - Part 13: Sash balancers
TS EN 13126-14 Building hardware - Specification and test methods for windows and glazed doors - Part 14: Sash fasteners
TS EN 933-9 + A1 Tests for geometric properties of aggregates - Part 9: Determination of fine grains - Methylene blue test
TS EN 1097-1 Tests for mechanical and physical properties of aggregates - Part 1: Determination of abrasion resistance (micro-Deval)
TS EN 1097-2 Tests for mechanical and physical properties of aggregates - Part 2: Methods for determination of fragmentation resistance
TS EN 1097-5 Tests for mechanical and physical properties of aggregates - Part 5: Determination of water content by drying in air circulation oven
tst EN 15551 + A1 Railway applications - Railway moving materials - Bumpers
TS EN 934-5 Chemical additives - For concrete, mortar and grout - Part 5: Shotcrete admixtures - Definitions, requirements, conformity, marking and labeling
TSE K 196 Duct shelter ventilation device
TS 13630 Lifts - F90 Class fire resistant sliding doors
TS 13630 Lifts - F90 Class fire resistant sliding doors
tst 1905 Prefabricated wooden doors
TS EN ISO 13260 Thermoplastic pipe systems for unpressurized underground drainage and waste water - Simultaneous temperature cycling and external load resistance test method
TSE CEN / TS 1566-2 Plastic pipe systems - Used for the disposal of cold and hot waste water in the building - Chlorinated polyvinyl chloride (pvc-C) - Part 2: Conformity assessment guide
TSE CEN / TS 14632 Plastic pipe systems - Used in pressure and non-pressurized drainage and sewage systems - Unsaturated polyester resin (up) based glass reinforced thermoset plastics (grp) conformity assessment guide
TSE CEN / TS 14632 Plastic pipe systems - Used in pressure and non-pressurized drainage and sewage systems - Unsaturated polyester resin (up) based glass reinforced thermoset plastics (grp) conformity assessment guide
TS EN ISO 717-1 Acoustics - Evaluation of sound insulation in buildings and building elements - Part 1: Sound insulation from air
TS 13631 Precast concrete products - Slab and stair cladding plates - Requirements
TS EN 15012 Plastic pipe systems - Soil and waste discharge systems in the building - Performance characteristics for pipes, fittings and fittings
TS ISO 15644 Road construction and maintenance equipment - Chippings spreader - Terminology and commercial properties
TS EN 12808-1 Joint fillers - For tiles - Part 1: Determination of the chemical resistance of reaction resin mortars
TS EN 13741 Thermal performance acceptance tests of mechanical airflow series wet cooling towers
TS 12737 Space requirement in public buildings - Social buildings - General rules
TS EN 1090-1 + A1 Steel and aluminum construction applications - Part 1: Conformity assessment requirements of bearing elements
tst EN 12238 Ventilation - Aerating end elements aerodynamic tests
tst 2164 Heating installation design rules
TS EN 1366-5 Fire resistance tests for service installations - Part 5: Service channels and gaps
TS EN 12839 Precast concrete products - Fence elements
tst EN 50193-1 Electric instantaneous water heaters - Part 1: General rules
TS EN 416-1 Heaters - Gas burning - Radiant tube - For outdoor use - Single burner - Ceiling mounted - Part 1: Safety
TS EN 16313 Connections for heating and cooling applications-G ¾ A with external threaded pipe and taper-changeable connections
TS EN 16205 Laboratory measurement of walking noise on soils
TS EN ISO 11297-1 Plastic piping systems - For the renovation of underground drainage and sewerage networks under pressure - Part 1: General
TS EN 12620 Concrete aggregates
TS EN 13381-4: 2013 Test method for the determination of the contribution of structural elements to fire resistance - Part 4: Passive protection applied to steel elements
tst EN 12620 Concrete aggregates
TS EN 12102 Air conditioners - Heat pumps and dehumidifiers air-driven noise-driven compressor driven by electrical energy - Determination of sound power level
tst EN 13242 Aggregates for non-binding and hydraulic bonding materials for civil engineering works and road construction
TS EN 13374 Temporary edge protection systems - Product properties, test methods
TS EN 16314 Gas meters - Additional features
TS EN 15218 Liquid cooling packs and air conditioners with evaporative cooled condensers, electrical driven compressors for space cooling - Terms, recipes, test conditions, test methods and rules
TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods
TS EN 15037-4: 2010 + A1 Precast concrete products - Gear laying systems - part 4: Expanded polystyrene (eps) blocks
TS EN 15037-4: 2010 + A1 Precast concrete products - Gear laying systems - Part 4: Expanded polystyrene (EPS) blocks
TS EN 15037-5 Precast concrete products - Gear laying systems - part 5: Lightweight blocks for simple formwork
tst EN 16236 Aggregate conformity assessment - Initial Type Testing and Factory Production Control
TS EN 33: 2011 / AC One-piece toilet bowls - Connection dimensions
TS EN 33: 2011 / AC One-piece toilet bowls - Connection dimensions
TS EN 196-2 Cement test methods - Part 2: Chemical analysis of cement
TS EN 196-2 Cement test methods - Part 2: Chemical analysis of cement
TS EN 1097-6 Tests for mechanical and physical properties of aggregates part 6: Determination of grain density and water absorption rate
TS EN 1097-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and limited compressive strength of lightweight aggregates
TS EN 13383-2 Protection layer stones (armor stone) - Part 2: Test methods
TS EN 1932 Exterior blinds and shutters - Resistance to wind loads - Test method and performance conditions
TS EN ISO 11297-3 Plastic pipe systems - For the renovation of underground drainage and sewerage networks under pressure - Part 3: Laying with crimped pipes
TS EN 15322 Bitumen and bituminous binders - for the identification of katbek and thinned bituminous binders - General principles
TS EN 303-2 / A1 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with spray fuel burners
TS EN 1429 Bitumen and bituminous binders - Determination of sieving residue in bitumen emulsions and determination of storage stability by sieving process
TS EN 13808 Bitumen and bituminous binders - General principles for the identification of cationic bitumen emulsions
TS EN 14825 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Assessment and test of seasonal performance under partial load conditions
TS EN 991 Gas concrete or lightweight aggregate porous concrete - Determination of pre-structured components
TS EN 933-2 Tests for geometric properties of aggregates part 2: Determination of particle size distribution-Test sieves, screen sizes
TS 10912 Jaw Crushers
TS EN 15286 Agglomerated stones - Slabs and tiles for wall coverings (external and internal)
TS EN 60745-2-21 / A1 Hand-held power tools - Safety - Part 2-21: Particular requirements for duct cleaners
TS EN 12098-1 Control unit for heating systems - Part 1: Control equipment for hot water heating systems
TS 13543 Non-destructive testing (NDT) methods for reinforced concrete structures
tst 10551 Urban roads - Parking lot design rules for cars
TS HD 60364-7-718 Electrical installation in buildings - Part 7-718: Requirements and uses for installations intended for public or business use
TS EN 62056-8-3 Electrical Measurement data exchange - DLMS / COSEM suite - Part 8-3: Communication profile for PLC S-FSK neighborhood networks
TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications
TS EN 14076 Wooden stairs - Terminology
TSE CEN / TS 14807 Plastic piping systems - Glass fiber reinforced thermoset plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for structural analysis of buried GRP-UP pipelines
TSE CEN / TS 14807 Plastic piping systems - Glass fiber reinforced thermoset plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for structural analysis of buried GRP-UP pipelines
TSE CEN / TS 16459 Fire resistance of roof and roof coverings - Extended application of test results in CEN / TS 1187
TS EN 651 Elastic floor coverings - Polyvinyl chloride (pvc) - Foam backing - Specifications
TS EN 1997-1 / A1 Eurocode 7: Geotechnical design - Part 2: General rules
TS EN 15804 + A1 Sustainability of buildings - Environmental declarations on products - Main rules for the product category of building products
Eurocode 1999: Design of aluminum constructions - Part 1-1: General structural rules TS EN 2-9-1 / A1
Eurocode 1999: Design of aluminum constructions - Part 1-1: General structural rules TS EN 2-9-1 / A1
TS EN 81-82 Safety rules for construction and installation - Existing elevators - Part 82 - Improving accessibility to existing elevators including disabled
TS EN 14241-1 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals used in flue linings
TS EN 81-77 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 77: Elevators subject to seismic conditions
TS EN 1998-3 / AC Eurocode 8: Design of earthquake resistant structures section 3: Evaluation and strengthening of buildings
TS EN ISO 12571 Hygothermal performance of building materials and products - hygroscopic sorption properties
TSE CEN / TR 16563 Principles of equivalent durability procedure
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions
TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 4: Operating characteristics, marking and operating instructions
TSE CEN / TR 16496 Construction Products - Assessment of the release of hazardous substances - Use of harmonized horizontal assessment methods
TS EN 834 Heat cost splitters-Radiators used to determine heat consumption-Powered by electrical energy
TS EN 12098-1 Control devices for heating systems - Part 1: External temperature controller for hot water heating systems
TSE CEN / TS 16516 Construction products - Assessment of the release of hazardous substances - Determination of indoor air emissions
TS EN 14825 Electrically driven compressor air conditioners, liquid cooling packs and heat pumps for ambient heating and cooling - Test and partial load classification and calculation of seasonal performance
TS EN 15101-1 Thermal insulation products for buildings - Loose-filled cellulose products formed on site - Part 1: Specifications for products before installation
TS EN 15101-2 Thermal insulation products for buildings - Loose-filled cellulose products on site - Part 2: Specification for products after installation
TS EN 16240 Light-emitting solid solid polycarbonate (PC) sheets for interior and exterior use on roofs, walls and ceilings-Requirements and test methods
TS EN 12390-13 Hardened Concrete Tests - Part 13: Determination of modulus of elasticity under pressure
TSE CEN / TR 16625 Flexible sheets for waterproofing - manufacturer's limit value Statistical definition of declaration and declaration value (MLV and MDV) -% 95 statistic
TS EN 15091 Sanitary fittings - Electronic opening and closing
TS 13565 / T1 Sandwich lightweight masonry units with insulation layer
TS HD 60364-5-51 / A11 Electrical installation in buildings - Part 5-51 - Selection and installation of electrical equipment - Common rules
TS HD 60364-5-56 / A11 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment group 56: Security services
tst 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades
tst 7847 Paints and plasters - Coating materials and coating systems for masonry and concrete facades
tst 39 Paints-Organic solvent based-Topcoat
TS 13642 Authorized services - Rules for escalators and conveyor belts
TS HD 60364-5-557 Electrical installation in buildings - Part 5-559: Selection and installation of electrical equipment - Auxiliary circuits
TS EN 62056-9-7 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - DLMS / COSEM layer - Part 9 - 7: Communication profile for TCP-UDP / IP networks
TS 105 Bitumen used as roofing material
TS EN 12086 Thermal insulation products - For buildings - Determination of water vapor transmission properties
TS EN 14496 Gypsum based adhesives - For composite sheets and gypsum sheets for thermal / sound insulation - Definitions, requirements and test methods
TS EN 14496 Gypsum based adhesives - For composite sheets and gypsum sheets for thermal / sound insulation - Definitions, requirements and test methods
TS EN 14496 Gypsum based adhesives - For composite sheets and gypsum sheets for thermal / sound insulation - Definitions, requirements and test methods
TS EN 13820 Thermal insulation materials - For buildings - Determination of organic content
TS EN 826 Thermal insulation products - For buildings - Determination of pressure behavior
TS EN 15824 Exterior and interior plasters - Organic binder - Features
TS EN ISO 1182 Response of building products to fire tests - Flammability test (ISO 1182: 2010)
TS EN 680 Aerated concrete - Determination of drying shrinkage
TS EN ISO 717-1 Acoustics - Grading of sound insulation in buildings and structural components - Part 1: Sound insulation from air (ISO 717-1: 2013)
TS EN 14759 Louvers - Acoustic insulation for airborne sound - Demonstrating performance
TS EN 14759 Louvers - Acoustic insulation for airborne sound - Demonstrating performance
TS EN 12390-1 Concrete - Hardened concrete tests - Part 1: Shape, size and other properties of test specimens and molds
TS EN 13126-7 Building hardware - Specification and test methods for windows and glazed doors - Part 7: Ring handles
TS EN 13126-12 Building hardware - Specification and test methods for windows and glazed doors - Part 12: Reversible hanging hardware with protrusion
TS EN 13126-11 Building hardware - Specification and test methods for windows and glazed doors - Part 11: Top hanging hardware that can be reversed by protrusion
TS EN 12429 Thermal insulation materials - For buildings - Conditioning to moisture balance under certain temperature and humidity conditions
TS EN 1015-21 Masonry mortar - Test methods - Part 21: Determination of the compatibility of the coarse plaster mortars applied as a single layer with the base materials
TS EN 1074-4 Valves - For water supply - Compliance and verification tests with intended requirements - Part 4: Air valves
TS EN 13403 Ventilation in buildings - Non-metal ducts - Duct system made of insulated duct panels
TS ISO 16422 Pipes and fittings used for water transmission under pressure - From poly (vinyl chloride) (PVC_O) without oriented plasticizer - Specification
TS EN ISO 15874-3 Plastic pipe systems - For hot and cold water - Polypropylene (PP) - Part 3: Fittings
TS EN 1998-3 / AC Design of earthquake resistant structures - Part 3: Evaluation and strengthening of buildings (Eurocode 8)
tst 201496182 Asbestos removal and disposal methods
TS EN 13496 Thermal insulation materials - Used in buildings - Determination of mechanical properties of glass fiber based reinforcing nets for exterior thermal insulation systems
TS EN 14509 Self-supporting double surface metal cladding insulating panels - Factory manufactured - Features
Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Data used in the calculation of the heat load based on design for space heating (ISO 5: 1: 5 / Amd 15927: 5)
TS EN ISO 15874-1 Plastic piping systems for hot and cold water - Polypropylene (Pp) - Part 1: General
TS 2170 Underground installation of water and gas pipes
TS 2170 Underground installation of water and gas pipes
TS EN 1457-1 Chimneys - Chimneys with clay / ceramic fume lining - Part 1: Fume lining working in dry conditions - Requirements and test methods
TS EN 14511-3 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 3: Test methods
TS EN ISO 15874-5 Plastic pipe systems - For hot and cold water - Polypropylene (PP) - Part 5: System suitability
TS EN ISO 15874-2 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 2: Pipes
TS EN 1998-1 Earthquake resistant construction design - Part 1: General rules, seismic effects and rules for buildings (Eurocode 8)
TS EN 1998-1 / AC Earthquake resistant construction design - Part 1: General rules, seismic effects and rules for buildings (Eurocode 8)
TS EN 13272 Railway applications - Electrical lighting of railway vehicles in public transport systems
TS EN 13823 + A1 Fire reaction tests for construction products - Construction products other than floors exposed to thermal effects with a single combustion element
TS EN 13823 + A1 Fire reaction tests for construction products - Construction products other than floors exposed to thermal effects with a single combustion element
TS EN 13126-10 Building hardware - Specification and test methods for windows and glazed doors - Part 10: Arm balancing systems
TS EN 16416 Geosynthetic clay barriers-Determination of water flow index-Constant level flexible wall permeameter method
TS ISO 4190-1 / Cor 1 Elevators - Dimensions related to installation - Part 1: Class I, Class II, Class III and Class VI elevators (Amended 1: 2011)
TS 799 Alaturka toilet stones
TS EN 1457-2 Chimneys - Chimneys with clay / ceramic fume lining - Part 2: Smoke lining working in wet conditions - Rules and test methods
TS EN 14618 Agglomerate stones - Terms and classification
TSE CEN / TR 16369 Use of control charts in concrete manufacturing
TS EN 14511-1 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 1: Terms, descriptions and classification
TS EN 14511-2 Electrically driven compressor driven air conditioners, liquid cooling packages and heat pumps for space heating and cooling - Part 2: Test conditions
TSE CEN / TR 16349 Specification framework to avoid harmful Alkaline-Silica Reaction (ASR) in concrete
TS ISO 16204 Durability - Service life design of concrete structures
TS EN ISO 6927 Structures and civil engineering works - Joint sealing materials - Glossary
TS EN 14315-1 Thermal insulation products - For buildings - Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam spray products prepared on site - Part 1: Specifications for rigid foam spraying system before application
tst EN 1997-2 Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)
tst EN 1997-2 Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)
TS EN 13362 Geosynthetic barriers - Characteristics required for use in duct construction
TS EN 13362 Geosynthetic barriers - Characteristics required for use in the construction of ducts
TS EN 13491 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and related underground structures
TS EN 13491 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and related underground structures
TS EN 13493 Geosynthetic barriers - Characteristics required for use in solid waste storage and disposal sites
TS EN 13493 Geosynthetic barriers - Characteristics required for use in solid waste storage and disposal sites
TS EN 1997-2 / tst AC Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)
TS EN 1997-2 / tst AC Geotechnical Design - Part 2: Soil Investigation and Tests (Eurocode 7)
TS EN 15285 Agglomerate stones - Modular tiles for indoor and outdoor cladding (indoor and outdoor)
TS EN 15285 / AC Agglomerated stones - Modular tiles for floor and stair covering (internal and external)
TS EN 50600-2-2 Information technology - data center facilities and infrastructures - Part 2-2: Power distribution
TS 13515 Complementary standard for the implementation of TS EN 206
TS 13515 Complementary standard for the implementation of TS EN 206
TS EN 197-2 Cement- Part 2: Conformity assessment
TS EN 13279-2 Gypsum binders and building gypsum - Part 2: Test methods
TS EN ISO 16283-1 Acoustics - Area measurement of sound insulation in building elements and structures - Part 1: Insulation of airborne sound (ISO 16283-1: 2014)
TS EN 1634-1 Fire resistance tests-Doors and shutters-Part 1: Fire doors and shutters
TS EN 1751 Ventilation in buildings - Air terminal devices - Aerodynamic tests of dampers and valves
TS EN 1364-3 Fire resistance tests for non-live components - Part 3: Curtain walls - Full layout
TS EN 12464-2 Light and lighting - Lighting of workplaces - Part 2: Outdoor workplaces
TSE CEN / TS 12201-7 Plastic pipe systems - For drinking and potable water - Polyethylene (pe) - Part 7: Conformity assessment guide
TS EN 16485 Round and sawn timber - Environmental product declarations - Product category rules for wood and timber products used in buildings
TS EN 16485 Round and sawn timber - Environmental product declarations - Product category rules for wood and timber products used in buildings
TS EN 15254-6 Non-load-bearing walls-Expanded application of the results of fire resistance tests Part 6: Curtain Wall
TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 1994-1-2 / A1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 13120 + A1 Interior blinds - Performance requirements including safety
TS EN 16433 Interior blinds - Choking hazards Protection - Test methods
TS EN 16434 Interior blinds - Choking hazards Protection - Requirements and test methods for safety devices
TS ISO 16422 Pipes and fittings for water transmission under pressure - Oriented, non-plasticizing polyvinyl chloride (PVC-O) - Specification
TS 13624 Authorized services - Rules for automatic car parking systems
TS EN 12015 Electromagnetic compatibility - Product family standard for elevators, escalators and moving conveyors - Emission
TS EN 13200-7 Attendance facilities - Part 7: Input and output elements and paths
TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test
TSE CEN / TS 1452-7 Plastic pipe systems - Part of polyvinyl chloride (pvc-U) with no plasticizer for drinking and potable water 7: Conformity assessment guide
TS EN 13395-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 1: Spatial determination of thixotropic mortars
TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method (ISO 10052: 2004)
TS EN 16205 Laboratory measurement of noise caused by walking on soils
tst EN ISO 140-14 Acoustics - Measurement of sound insulation in buildings and building components - Part 14: Guidance on special terrain situations
ISO EN ISO 717-2 Acoustics - Grading of sound insulation in buildings and components - Part 2: Impact sound insulation (ISO 717-2: 2013)
TS EN 450-1 Fly Ash - Used in concrete - Part 1: Description, specifications and conformity criteria
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN 15167-2 Ground blast furnace slag - For use in concrete, mortar and grout - Part 2: Conformity assessment
TS EN 12504-2 Concrete tests in buildings - Part 2: Non-destructive testing - Determination of the number of bounces
TS EN 934-2 + A1 Chemical additives - For concrete, mortar and grout - Part 2: Chemical additives for concrete - Definitions, requirements, conformity, marking and labeling
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TS EN 934-3 + A1 Chemical additives - For concrete, mortar and grout - Part 3: Chemical additives for masonry mortar - Definitions, requirements, conformity, marking and labeling
TS EN 14511-4 Electrically driven compressor-driven air conditioners, liquid cooling packs and heat pumps for space heating and cooling - Part 4: Operating requirements, marking and operating instructions
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TS EN 13492 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary depots
TS EN 13924-2 Bitumen and bituminous binders - Specification frame for special coating bitumen - Multi-quality flooring bitumen
TS 13655 Masonry units - Specifications - Foam concrete masonry units
TS EN 1364-4 Fire resistance tests of load-bearing elements - Part 4: Façade - Part configuration
TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test
TSE K 268 Hydrocyclone
TSE K 270 Gravel Filter
TSE K 281 Hydraulic automatic filter
TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN ISO 10052 / A1 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN ISO 16283-1 Acoustics - Field measurements for sound insulation of structures and structural elements - Part 1: Insulation of airborne sound (ISO 16283-1: 2014)
TS EN 62056-3-1 Electrical measurements - Information exchange for reading schedules or load control - Part 3-1- Use of local area network on twisted fence with carrier marking
TS EN 50600-2-1 Information technology - Data center facilities and infrastructure - Part 2-1: Building construction
TSE K 236 Metal frame components used in cementitious particleboard systems - Definitions, requirements and test methods
TS EN 12811-4 Temporary work equipment - Part 4: Protection fans for scaffolding - Performance requirements and product design
tst prEN 14351-2 Windows and doors - Product standard, performance characteristics - Part 2: Interior doors ready for pedestrian passage - Without resistance to fire and / or smoke leak characteristics
TS EN 13361 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
TS EN 13363-1 + A1 Means of sun protection combined with glazing - Calculation of sun and light transmission - Part 1: Simplified method
TS EN 13363-1 + A1 / AC Sun protection devices combined with glazing - Calculation of sun and light transmission - Part 1: Simplified method
TS EN 13363-2 Means of sun protection combined with glazing - Calculation of total solar and light transmittance - Part 2: Detailed calculation method
TS EN 13363-2 / AC Sun protection devices combined with glazing - Calculation of total solar and light transmittance - Part 2: Detailed calculation method
tst EN 15316-4-3 Indoor heating systems - System energy requirements and system efficiency calculation method - Part 3: Heat generation systems, solar heating systems
TS EN 1992-2 Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 50600-2-1 Information technology - Data center facilities and infrastructure - Part 2-1: Building construction
TSE K 236 Metal frame components used in cementitious particleboard systems - Definitions, requirements and test methods
TS EN 12811-4 Temporary work equipment - Part 4: Protection fans for scaffolding - Performance requirements and product design
tst prEN 14351-2 Windows and doors - Product standard, performance characteristics - Part 2: Interior doors ready for pedestrian passage - Without resistance to fire and / or smoke leak characteristics
TS EN 13361 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
TS EN 13363-1 + A1 Means of sun protection combined with glazing - Calculation of sun and light transmission - Part 1: Simplified method
TS EN 13363-1 + A1 / AC Sun protection devices combined with glazing - Calculation of sun and light transmission - Part 1: Simplified method
TS EN 13363-2 Means of sun protection combined with glazing - Calculation of total solar and light transmittance - Part 2: Detailed calculation method
TS EN 13363-2 / AC Sun protection devices combined with glazing - Calculation of total solar and light transmittance - Part 2: Detailed calculation method
tst EN 15316-4-3 Indoor heating systems - System energy requirements and system efficiency calculation method - Part 3: Heat generation systems, solar heating systems
TS EN 1992-2 Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 1992-2 Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 1992-3 Design of concrete structures - Part 3: Liquid retention and containment structures (Eurocode 2)
TS EN 1992-3 Design of concrete structures - Part 3: Liquid retention and containment structures (Eurocode 2)
TS EN ISO 1452-2 / D1 Plastic pipe systems - For potable and potable water - Used in underground and surface pressure sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 2: Pipes
TS EN 1998-2 Earthquake resistant design - Part 2: Bridges (Eurocode 8)
TS 103 Bituminous primer for roofing, moisture insulation and waterproofing
TSE CEN / TR 16639 k-value concept, equivalent concrete performance concept and use of equivalent performance concepts of combinations
TS EN 607 Rain gutters and fittings-Made of PVC-U-Recipes-Features and tests
TS EN 13084-7 Chimneys - Free standing - Part 7: Technical characteristics of cylindrical steel products for single walled steel chimneys and steel linings
TS 13685 On-site determination of compressive strength in structures and precast concrete components - Complementary standard for the application of TS EN13791
TS 13685 On-site determination of compressive strength in structures and precast concrete components - Complementary standard for the application of TS EN13791
TS 500 / T3 Design and construction rules of reinforced concrete structures
TS 13653 Test methods for the determination of in situ density of fresh and hardened concrete, including roller compacted concrete (RCC) by nuclear method
TSE K 269 Surface coating impregnated with elastomeric liquid plastic insulation material to polyester, polyamide or similar synthetic carrier fibers
TS 21 Cement - White portland cement - Composition, properties and conformity criteria
TS 1769 Sorel Cement (MgO-based binder) Intermediate
tst EN 13814 Machines and structures used in amusement parks and playgrounds - Safety
TS EN 14617-4 Agglomerated stones - Test methods - Part 4: Determination of abrasion resistance
TS EN 14617-5 Agglomerated stones - Test methods - Part 5: Determination of freezing and melting resistance
TS EN 14617-6 Agglomerated stones - Test methods - Part 6: Determination of thermal shock resistance
TS 13072 Authorized services - Rules for heating installations and plumbing
TS EN 14617-8 Agglomerated stones - Test methods - Part 8: Determination of resistance to fixation (with dowels)
TS EN 14617-9 Agglomerated stones - Test methods - Part 9: Determination of impact resistance
TSE K 308 Organic or inorganic binder coatings applied indoors
TSE K 260 Shutter profiles made of rigid polyvinyl chloride (PVC-U)
TS 13427 Authorized services - Lightning protection systems - rules
TS EN 14617-10 Agglomerated stones - Test methods - Part 10: Determination of chemical resistance
TS EN 14617-11 Agglomerated stones - Test methods - Part 11: Determination of the coefficient of linear thermal expansion
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (Eurocode 2)
Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for roasters, grills and similar portable cooking appliances
TS EN 14617-12 Agglomerated stones - Test methods - Part 12: Determination of dimensional stability
TS EN 14617-13 Agglomerated stones - Test methods - Part 13: Determination of electrical resistivity
TS EN 1097-4 Tests for mechanical and physical properties of aggregates - Part 4: Determination of voids of dry compacted filling material
TS EN 1097-7 Tests for mechanical and physical properties of aggregates - Part 7: Determination of grain density of filler material - Pycnometer method
TS EN 14617-15 Agglomerated stones - Test methods - Part 15: Determination of compressive strength
TS EN 14617-16 Agglomerated stones - Test methods - Part 16: Determination of dimensions, geometric properties and surface quality of modular tiles
TS EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of stone polishing value
TS EN 1097-9 Tests for mechanical and physical properties of aggregates - Part 9: Determination of abrasion resistance from studded tires - Nordic test
TS EN 932-5 Tests for general properties of aggregates - Part 5 - General devices and calibration
TS EN 1097-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and limited compressive strength of lightweight aggregates
TS EN 933-1 Tests for geometric properties of aggregates - Part 1: Determination of particle size distribution - Screening method
TS EN 1097-6 Tests for mechanical and physical properties of aggregates - Part 6: Determination of grain density and water absorption rate
tst EN 13383-2 Protection layer stones - Section 2: Test methods
TS EN 933-3 Tests for geometric properties of aggregates - Part 3: Determination of grain shape - Flatness index
TS EN 933-4 Tests for geometric properties of aggregates - Part 4: Determination of grain shape - Shape index
TS ISO 2848 Building construction - Modular compatibility - Principles and rules
tst EN 933-9 + A1 * Tests for geometric properties of aggregates - Part 9: Evaluation of fine material - Methylene blue test
TS EN 933-10 Tests for geometric properties of aggregates - Part 10: Determination of fine material - Classification of fine filling materials by particle size (air jet sieving)
TS EN 933-11 Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components
TS EN 933-11: Tests for geometric properties of aggregates 2010 / AC - Part 11: Classification test for recovered coarse aggregate components
TS EN 1367-4 Tests for thermal and decomposition properties of aggregates - Part 4: Determination of drying shrinkage
TS EN 1367-5 Tests for thermal and decomposition properties of aggregates - Part 5: Determination of thermal shock resistance
TS EN 1367-6 Tests for thermal and decomposition properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
TS ISO 2848 Building construction - Modular coordination - Principles and rules
TS EN 1744-1 + A1 Tests for chemical properties of aggregates - Part 1: Chemical analysis
TS EN 1744-7 Tests for chemical properties of aggregates - Part 7: Determination of combustion loss of aggregate (MIBA aggregate) in municipal ash incinerator
prEN 14351-2 Windows and doors - Product standard, performance characteristics - Part 2: Interior doors ready for pedestrian passage - No resistance to fire or smoke leak characteristics
TS EN 12159 Construction hoists - For transporting personnel and materials - Vertical guide rail, with cab
TS ISO 23045 Building environmental design - Guide to assessing thermal efficiency of new buildings
TS ISO 23045 Building environment design - Guidelines for assessing the energy efficiency of new buildings
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN 14487-2 Shotcrete - Part 2: Application
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN 1995-1-2 / AC Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN 1995-1-2 Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN 1995-1-2 Design of wooden structures - Part 1-2: General - Fire protection design (Eurocode 5)
TS EN 1995-1-1 / AC Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 / AC Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 / A1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 / A1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 14488-1 Shotcrete - Tests - Sampling from fresh and hardened concrete
TS EN 13141-8 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 8: Performance tests of ductless mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems designed for single room
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
TS EN 933-9 + A1: Tests for the geometric properties of aggregates - Part 2013: Determination of fine material - Methylene blue test
TS EN 12110 Tunnel boring machines - Airtight cabs - Safety regulations
TS EN 12111 Tunnel boring machines - Rotary head excavators, rotary drum continuous excavators and impact excavators - Safety regulations
TS EN 16194 Wastewater-free toilet cubicles - Characteristics of services and products related to the layout of the cubicles and sanitation products
ISO EN ISO 10140-5 / A1 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for plant and test equipment to be tested - A1: Rain sound (ISO 10140-5: 2010 / Amd1: 2014)
TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
TS EN ISO 16251-1 Acoustic-Laboratory measurement of the impact sound reduction from the floor covering on a small floor model - Part 1: Heavy compact floor
TS EN 933-6 Tests for geometric properties of aggregates - Part 6: Determination of surface characteristics - Determination of flow coefficient in aggregates
TS EN 1367-7 Tests for thermal and wear properties of aggregates - Part 7: Determination of resistance of lightweight aggregates to freezing and thawing
TS EN 1367-8 Tests for thermal and wear properties of aggregates - Part 8: Determination of the resistance of lightweight aggregates to disintegration
TS EN 932-5 / AC Tests for general properties of aggregates - Part 5: General devices and calibration
TS EN 1097-10 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water absorption height
TSE CEN / TR 16632 Cement - Concentration calorimetry (ICC) at constant temperature for the determination of heat of hydration - New developments report and Recommendations
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 13963 Joint materials - For gypsum boards - Definitions, requirements and test methods
TS EN 14190 Gypsum board products - Recycled material - Definitions, requirements and test methods
ISO EN ISO 10140-5 / A1 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for plant and test equipment to be tested - A1: Rain sound (ISO 10140-5: 2010 / Amd1: 2014)
TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
TS EN ISO 16251-1 Acoustic-Laboratory measurement of the impact sound reduction from the floor covering on a small floor model - Part 1: Heavy compact floor
TS EN 933-6 Tests for geometric properties of aggregates - Part 6: Determination of surface characteristics - Determination of flow coefficient in aggregates
TS EN 1367-7 Tests for thermal and wear properties of aggregates - Part 7: Determination of resistance of lightweight aggregates to freezing and thawing
TS EN 1367-8 Tests for thermal and wear properties of aggregates - Part 8: Determination of the resistance of lightweight aggregates to disintegration
TS EN 932-5 / AC Tests for general properties of aggregates - Part 5: General devices and calibration
TS EN 1097-10 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water absorption height
TSE CEN / TR 16632 Cement - Concentration calorimetry (ICC) at constant temperature for the determination of heat of hydration - New developments report and Recommendations
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 13963 Joint materials - For gypsum boards - Definitions, requirements and test methods
TS EN 14190 Gypsum board products - Recycled material - Definitions, requirements and test methods
ISO EN ISO 10140-5 / A1 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for plant and test equipment to be tested - A1: Rain sound (ISO 10140-5: 2010 / Amd1: 2014)
TS EN ISO 16484-5 Building automation and control systems - Part 5: Data communication protocol
TS HD 60364-7-753 Low voltage electrical installations - Part 7 - 753: Rules for special installations or locations - Heating cables and embedded heating systems
TSE CEN / TR 13801 Waste discharge in soil and building structure (low and high temperature) Plastic pipe systems - Thermoplastic - Recommended Application for Installation
TS EN 14488-2 Shotcrete - Tests - Part 2: Compressive strength of new (young) shotcrete
TS IEC 60050-826 International Electrotechnical Glossary - Part 826: Electrical Installations
TS EN 1993-1-1 / A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)
TS EN 1993-1-1 / A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)
TS EN 1995-1-1 / A2 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
TS EN 1995-1-1 / A2 Design of wooden structures - Part 1-1: General - General rules and rules for buildings (Eurocode 5)
1991-1-7 / A1 Impacts on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)
TS EN 16309 + A1 Sustainability in buildings - Assessment of social performance of buildings - Calculation method
TS EN 14908-1: 2014 Open data communication for building automation, controls and building management - Control network protocol - Part 1: Protocol stack
TS EN 14908-2 Open data communication for building automation, controls and construction management - Control network protocol _ section 2: Twisted pair communication
TS EN 15502-2-2 Gas-fired Central heating boilers - Part 2-2: Standard for Type B1 devices
TS 13658 Plastic and Rubber based synthetic covers - Used for Waterproofing of Roofs and Foundations - Application Rules
TS EN 31 + A1 Washbasins - Connection dimensions
TS EN 13859-1 Flexible sheets - For waterproofing - Definitions and characteristics of substrates - Part 1: Used as substrate for discontinuous roofing sheets
TS EN 13859-2 Flexible sheets - For waterproofing - Definitions and characteristics of substrates - Part 2: Used as substrate for walls
TSE CEN / TS 15963 Bitumen and bituminous binders - Determination of fracture strength temperature by three point bending test on notched sample
TS EN 35 Floor standing and wall mounted bidets - On the edge of the tap holes - Connection dimensions
TS EN 508-1 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 1: Steel
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems (ISO 15758: 2014)
TS EN ISO 10545-8 Ceramic tiles - Part 8: Determination of linear thermal expansion
TS EN ISO 10545-4 Ceramic tiles - Part 4: Determination of the breaking and breaking strength module (ISO 10545-4: 2014)
TS EN 12326-1 Slate and stone products for discontinuous roofing and siding - Part 1: Specification for slate and carbonated slate
TSE CEN / TS 15548-1 Thermal insulation products for building equipment and installations in industrial plants - Determination of thermal resistance by protected hot plate method Section 1: Measurements at elevated temperatures from 100 ° C to 850 ° C
TS EN 81-22 Safety rules for the construction and installation of elevators - Elevators for transport of persons and goods - Part 22: Electric elevators for inclined plane
TS EN 14488-5 Shotcrete - Tests - Part 5: Determination of energy absorption capacity in fiber-reinforced plate samples
TS EN 16191 Tunnel boring machine - Safety regulations
TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems (ISO 15758: 2014)
TS EN 81-20 Safety rules for the construction and installation of elevators - Elevators for the transport of persons and goods - Part 20: Elevators of persons and goods
TS EN 14471 + A1 Chimneys - Smoke path plastic lined chimney systems - Rules and test methods
TS ISO 1791 Building construction - Modular coordination - Terms
TS EN 81-20 Elevators - Safety regulations for building and installation - Elevators for man and freight - Part 20: Man and load elevators
TS EN 81-50 Safety rules for construction and installation of elevators - Inspection and tests - Part 50: Design rules, calculations, inspections and tests of elevator components
TS EN 933-6 Tests for geometric properties of aggregates - Part 6: Determination of surface characteristics - Determination of flow coefficient of aggregates
TS EN 1367-7 Tests for thermal and wear properties of aggregates - Part 7: Determination of resistance of lightweight aggregates to freezing and thawing
TS EN 1097-10 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water absorption height
TS EN 1367-8 Tests for thermal and wear properties of aggregates - Part 8: Determination of the resistance of lightweight aggregates to disintegration
TS EN 16247-2 Energy Inspections - Part 2: Buildings
TSE K 317 Modular construction systems - Modular cabins made of glass fiber reinforced polyester material that can be installed and removed on site
TSE K 317 Modular construction systems - Modular cabins made of glass fiber reinforced polyester material that can be installed and removed on site
TS EN 16481 Wooden stairs - Structural design - Calculation methods
TS EN ISO 7235 Acoustics - Laboratory measurement procedures for silencers and air termination units mounted in the ventilation duct - Interrupt loss, flow noise and total pressure loss (ISO 7235: 2003)
TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method (ISO 10052: 2004)
TS EN 81-50 Safety rules for the construction and installation of elevators - Inspection and tests - Part 50: Design rules, calculations, inspections and tests of elevator components
TS 699 / T1 Natural building blocks - Examination and laboratory test methods
TS 699 / T1 Natural building blocks - Examination and laboratory test methods
TS EN ISO 4064-1 Water meters for cold drinking water and hot water - Part 1: Metrology and technical requirements
TS EN ISO 4064-2 Water meters for cold drinking water and hot water - Part 2: Test methods
TS EN ISO 4064-3 Water meters for cold drinking water and hot water - Part 3: Test report format
TS EN ISO 4064-4 Water meters for cold drinking water and hot water - Part 4: Non-metrological requirements not covered by ISO 4064-1
TS EN ISO 4064-5 Water meters for cold drinking water and hot water - Part 5: Installation requirements
TSE CEN / TR 16632 Determination of heat of hydration of cement by isothermal conduction calorimeter (ICC): Reports and recommendations on recent developments
TSE CEN / TS 16628 Energy performance of buildings - Basic principles for the EPB standard series
TSE CEN / TS 16629 Energy performance of buildings - detailed technical rules for the EPB standard series
TS EN 14488-6 Shotcrete - Tests - Part 6: Thickness of concrete on substrate
TS EN 14488-7 Shotcrete - Tests: Part 7: Fiber content of fiber reinforced concrete
TSE CEN / TS 15324 Bitumen and bituminous binders - Determination of the co-viscosity temperature on the basis of low shear viscosity using dynamic shear rheometer in low frequency vibration mode
TS 10325 Concrete mixers
TSE K 314 Foam concrete on-site casting, non-bearing wall elements - for buildings
TSE CEN / EN 81-12 Lifts - Safety regulations for construction and installation - Basics and comments - Part 12: Use of EN 81-20 and EN 81-50 in specific markets
TS EN 50174-2 / A2 Information technology - Cabling installation - Part 2: Installation planning and indoor applications
tst 13630 Lifts - F90 Class fire resistant sliding doors
tst 13630 Lifts - F90 Class fire resistant sliding doors
TSE K 316 Formwork components for reinforced concrete - Tie-rod casing - Polyethylene - Recipes, requirements and test methods
TS HD 60364-7-717: 2010 / AC: 2014 Electrical installations in buildings - Part 7.717: Rules for special installations or locations - Mobile or portable unit
TS HD 60364-7-753: 2014 / AC Low voltage electrical installations - Part 7 - 753: Rules for special installations or places - Heating cables and embedded heating systems
TS EN 14488-3 Shotcrete - Tests - Part 3: Flexural strength of fiber reinforced beam specimens (Initial cracking, final and residual bending strengths)
TS EN 14488-4 + A1 Shotcrete - Tests - Part 4: Determination of bond strength in cores by direct tensile strength
TS EN 14889-1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and suitability
TS EN 408 + A1 Timber structures - Timber and glued laminated timber - Determination of some physical and mechanical properties
TSE CEN / TR 1749 European program for the classification of gas devices according to the discharge method of combustion products (types)
TSE CEN / TR 14245 Cement - EN 197-2 Guidance for conducting conformity assessment
TS EN 480-1 Chemical additives - For concrete, mortar and grout - Test methods - Part 1: Test concrete and test mortar for tests
TS EN 480-1 Chemical additives - For concrete, mortar and grout - Test methods - Part 1: Test concrete and test mortar for tests
TSE CEN / TR 16676 Loss of energy in industrial doors
TS EN 16034 Pedestrian door sets, industrial, commercial, garage doors and opening windows - Product standard, performance and characteristics - Fire resistance and / or smoke control features
TS EN ISO 10545-1 Ceramic tiles - Sampling and acceptance principles
TS EN 13279-2 Building gypsum and plaster - Part 2: Test methods
TS 11758-1 / T2 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 1: Specifications
TS EN 13126-5 + A1 Building hardware - Requirements and test methods for windows and glazed doors - Part 5:
TS EN 13126-5 + A1 Building hardware - Specification and test methods for windows and glazed doors - Part 5: Devices limiting the opening of windows and glazed doors
TS 13671 Waterproofing and moisture insulation with polymer modified bitumen based thick coatings - General requirements and application rules for foundation and curtain insulation
TSE CEN / TS 16516 Construction products - Evaluation of the release of hazardous substances - Determination of the release of hazardous substances into the indoor air
TS EN 15091 Sanitary fittings - Electronic opening and closing
TS EN 1751 Ventilation in buildings - Air terminal devices - Aerodynamic tests of dampers and valves
tst EN 834 Heat cost splitters-Radiators used in determining heat consumption -Working with electrical energy
TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
TS EN 1995-2 Design of wooden structures - Part 2: Bridges (Eurocode 5)
TS EN 1995-2 Design of wooden structures - Part 2: Bridges (Eurocode 5)
EN 12592: 2014 Bitumen and bituminous binders - Determination of solubility
TS EN 1998-2 / AC Earthquake resistant design - Part 2: Bridges (Eurocode 8)
EN 12596: 2014 Bitumens and bituminous binders-Kinematic viscosity determination -Vacuum capillary method
EN 12595: 2014 Bitumen and bituminous binders-Kinematic viscosity determination
TS EN 1996-1-1 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (Eurocode 6)
TS EN 1996-1-1 + A1 Design of masonry structures - Part 1-1: General rules for reinforced and non-reinforced masonry structures (Eurocode 6)
TS EN 1998-2 / A2 Earthquake resistant construction design - Part 2: Bridges (Eurocode 8)
TS EN 1998-2 / A1 Earthquake resistant construction design - Part 2: Bridges (Eurocode 8)
TS EN 14889-2 Fibers - For use in concrete - Part 2: Polymer fibers - Definitions, specifications and compatibility
TS EN 15659 Safe storage units - Classification and test methods for fire resistance - First fire storage units
TS 9881 Rules for parking spaces
TS EN 14651 + A1 Metal fiber concrete - Test method - Determination of tensile strength at bending (LOP)
TS EN 14845-2 Fibers - For use in concrete - Test methods - Part 2: Effect on concrete
TS EN 14845-1 Fibers - For use in concrete - Test methods - Part 1: Blank concretes
tst 201599393 Windows and doors - Product standard, performance characteristics - Part 2: Interior doors ready for pedestrian passage - Without resistance to fire and / or smoke leak characteristics
TSE CEN / EN 81-12 Lifts - Safety regulations for construction and installation - Guidelines and comments - Part 12: Application of EN 81-20 and EN 81-50 in special markets
TS EN 50600-2-1 Information technology - Data center facilities and infrastructure - Part 2-1: Building construction
TS EN 50600-2-2 Information technology - data center facilities and infrastructures - Part 2-2: Power distribution
TS EN 15720 Sanitaryware - Shower trays made of impact-modified coextruded ABS / acrylic sheets - Requirements and test methods
TS EN 13964 Suspended ceilings - Requirements and test methods
TS EN 14844: 2006 + A2 Precast concrete products - Box lattices
TS EN 197-2 Cement - Part 2: Conformity assessment
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 13950 Gypsum boards - Heat / sound insulated composite boards - Definitions, requirements and test methods
TS EN 12859 Gypsum blocks - Definitions, requirements and test methods
TS EN 13963 Joint materials - For gypsum boards - Definitions, requirements and test methods
TS EN 14190 Gypsum boards - Recycled - Recipes, requirements and test methods
TS EN 1337-10 Bearings - Used in structures - Part 10: Inspection and maintenance
TS EN 12812 Scaffolding - Performance requirements and overall design
TS EN 74-1 Scaffolding - Consisting of pipes and joining elements - Joining elements used in work scaffolding and formwork scaffolding, loose-fit guides and base plates - Part 1: Necessary conditions and test procedures
TS EN 74-2 Scaffolding - Consisting of pipes and joining elements - Joining elements used in work scaffolding and formwork scaffolding, loose-fit guides and base plates - Part 2: Special joining elements - Requirements and test procedures
TS EN 74-3 Scaffolding - Consisting of pipes and joining elements - Joining elements used in work scaffolding and formwork scaffolding, loose-fit guides and base plates - Part 3: Flat base plates and pin guides - Necessary conditions and test procedures
TS EN 12390-13 Hardened Concrete Tests - Part 13: Determination of secant modulus of elasticity under pressure
TS EN 932-5 / AC Tests for general properties of aggregates - Part 5: General instruments and calibration
TS EN 1994-1-2 / tstA1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 1994-1-2 / tstA1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN 1994-1-2 / tstA1 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Building fire project
TS EN ISO 10456 Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of declared and design thermal values (ISO 10456: 2007)
TS EN ISO 10456 / AC Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of design and thermal values - Technical correction 1 (ISO 10456: 2007 / Cor 1: 2009)
TS EN 12365-1 Building equipment - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 1: Performance requirements and classification
TS EN ISO 12571 Hygothermal performance of building materials and products - Determination of hygroscopic water absorption properties (ISO 12571: 2013)
TS EN 16247-2 Energy audits - Part 2: Buildings
TS EN 13391 Mechanical tests for post-tensioning systems
tst EN 15804 + A1 Sustainability of structures - Environmental declarations on products - Main rules for the product category of construction products
TS EN 508-1 Roof and wall cladding sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 1: Steel
TS EN 508-2 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 2: Aluminum
TS EN 508-3 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 3: Stainless steel
TS EN 534 + A1 Bituminous sheets - Corrugated - Product properties and test methods
TS EN 14509 Self-supporting double-surface metal-coated insulating panels - Factory manufactured - Features
TS EN 15101-1 Thermal insulation products for buildings - Loose-filled cellulose (LFCI) products on site - Part 1: Specification for pre-installation products
TS EN 15101-2 Thermal insulation products for buildings - Loose-filled cellulose (LFCI) products on site - Part 2: Specification for installed products
TS EN ISO 10545-8 Ceramic tiles - Part 8: Determination of linear thermal expansion
TS EN 12087 Thermal insulation materials for buildings - Determination of long term water absorption by immersion
TS EN 1849-2 Flexible sheets for waterproofing - Determination of thickness and unit area mass - Part 2: Plastic and rubber sheets
TS EN 13859-1 Flexible sheets - For waterproofing - Descriptions and characteristics of substrates - Part 1: Substrates for discontinuous roofing
TS EN 13859-2 Flexible sheets - For waterproofing - Definitions and characteristics of substrates - Part 2: Substrates for walls
TS EN 13956 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
TS EN 13967 Flexible sheets - For waterproofing - Plastic and rubber damp insulation boards, including plastic and rubber sheets for bundling insulation in basements - Definitions and characteristics
tst 201498522 Prefabricated reinforced foam concrete building elements
TSE CEN / TS 12201-7 Plastic pipe systems - For drinking and potable water - Polyethylene (pe) - Part 7: Conformity assessment guide
TSE CEN / TS 1452-7 Plastic pipe systems - Part of polyvinyl chloride (pvc-U) with no plasticizer for drinking and potable water 7: Conformity assessment guide
TS EN 14394 + A1 Heating boilers with burner The main heat output does not exceed 10 mw and the highest operating temperature is 110 ° c
TS EN 13294 Concrete structures - Products and systems for protection and repair - Test methods - Determination of curing time
TS EN 13578 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility with fresh concrete
TS EN 13580 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water absorption and resistance to alkalis for hydrophobic impregnations
TS EN 14353 + A1 Metal bearings and connection profiles - Used in combination with gypsum boards - Definitions, requirements and test methods
tst EN 13381-4 Test method for the determination of the contribution of structural elements to fire resistance - Part 4: Passive protection applied to steel elements
TS EN 14846 Building equipment - Locks and tongues - Electromechanically operated locks and return plates - Requirements and test methods
TS ISO 16204 Durability - Lifecycle design of concrete structures
TSE CEN / TR 16349 Frame specification to prevent damage from alkali-silica reaction (ASR) in concrete
TSE CEN / TR 16369 Use of control charts in concrete manufacturing
TSE CEN / TR 16563 Principles of equivalent durability processes
TSE CEN / TS 16637-1 Construction products - Assessment of hazardous substance release - Part 1: Guidance for surface extraction tests and determination of additional test steps
TSE CEN / TS 16637-2 Construction products - Evaluation of the release of hazardous substances - Part 2: Horizontal dynamic surface extraction test
TSE CEN / TR 16639 k-value concept, equivalent concrete performance concept and use of equivalent performance concepts of combinations
TS EN 14500 Blinds and shutters - Thermal comfort and visibility comfort - Test and calculation methods
tst EN 16485 Round and sawn timber - Environmental product declarations - Product category rules for wood and timber products used in buildings
tst EN 16485 Round and sawn timber - Environmental product declarations - Product category rules for wood and timber products used in buildings
TS EN 1364-3 Fire resistance tests for non-bearing elements - Part 3: Curtain wall - Full installation (full equipment)
TS EN 1364-4 Fire resistance tests of load-bearing elements - Part 4: Façade - Part configuration
TS EN 14600 Door systems and windows with fire resistance and / or smoke control features - Rules and classification
TS EN 13225 Precast concrete products - Structural bar elements
TS EN 13369 Precast concrete products - General rules
TS EN 13747 + A2 Precast concrete products - Slab plates for laying systems
TS EN 1337-11 Structural bearings - Part 11: Transport, storage and assembly
TS EN 1337-8 Bearings - Used in structures - Part 8: Guide bearings and movement restricted bearings
TS EN 15643-3 Sustainability in buildings - Evaluation of buildings - Part 3: General framework for the assessment of social performance
TS EN 62056-7-6 Electricity meter data exchange - DLMS / COSEM package - Part 7 – 6: 3 layered, connection-oriented HDLC-based communication profile (IEC 62056-7-6: 2013)
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 12977-3 Thermal solar systems and components - Special systems - Part 3: Performance test methods for solar water heating tanks
TS EN 1991-1-7 Effects on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)
TS EN 1991-1-7 / AC Effects on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)
1991-1-7 / A1 Impacts on structures - Part 1-7: General effects - Accidental effects (Eurocode 1)
TS 13662 Exterior scaffolding consisting of wooden components
TS 13272 Standard application for sampling of materials according to probability principle
TSE CEN / TS 1187 Test methods for exposed roofs
TS EN 12758 Glass - Used in buildings - Glazing and airborne sound insulation - Product description and specification
TS EN ISO 16251-1 Acoustic-Laboratory measurement of the impact sound reduction from the floor covering on a small floor model - Part 1: Heavy compact floor
TSE K 325 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TSE K 325 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TS EN ISO 1716 Fire reaction tests of building products - Determination of gross combustion temperature (calorific value) (ISO 1716: 2010)
TS EN 1366-5 Fire resistance tests for service installations - Part 5: Service ducts and manholes
TS EN 62056-9-7 Electricity meter data exchange - DLMS / COSEM package - Part 9 - 7: Communication profile for TCP-UDP / IP networks (IEC 62056-9-7: 2013)
TS EN 1487 Building valves - Hydraulic safety groups - Tests and features
TSE CEN / TS 14632 Plastic pipe systems - pressurized and unpressurized; for drainage, sewage and water applications - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Conformity assessment guide
TSE CEN / TS 14632 Plastic pipe systems - pressurized and unpressurized; for drainage, sewage and water applications - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Conformity assessment guide
TS 802 Concrete mix design calculation principles
TS EN 1013 + A1 Transparent, single-layer, plastic-profile sheets for use in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
TS EN 12828 + A1 Heating systems - Buildings - Design of water-operated heating systems
TSE CEN / TS 15963 Bitumen and bituminous binders - Determination of fracture strength temperature by three point bending test on notched sample
TS EN 1109 Flexible sheets - For waterproofing - Bituminous sheets for roofs - Determination of low temperature flexibility
TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications
TS EN ISO 10426-1 / AC Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications - Technical correction 1
TS EN ISO 10545-4 Ceramic tiles - Part 4: Determination of breaking module and fracture strength (ISO 10545-4: 2014)
TS EN 12326-1 Slate and stone products for discontinuous roofing and siding - Part 1: Specification for slate and carbonated slate
TS EN 14303 Thermal insulation products for building equipment and installations in industrial plants - Factory made mineral wool (MW) products - Specifications
TS EN 14313 Thermal insulation products for building equipment and installations in industrial plants - Factory made polyethylene foam (PEF) products - Specifications
tst EN 14076 Wooden stairs - Terminology
tst EN 16481 Wooden stairs - Structural design - Calculation methods
TS EN 15700 Safety of conveyor belts for winter sports and free use
Safety regulations - for household and similar electrical appliances - part 7936- 60335: Particular requirements for electric heat pumps, air conditioners and dehumidifiers
TS EN 62561-1 Lightning protection system components (LPSC) - Part 1: Requirements for connection components
TS EN 62561-2 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and grounding electrodes (IEC 62561-2: 2012, modified)
TS EN 62561-3 Lightning protection system components (LPSC) - Part 3: Requirements for insulating arc horns (IEC 62561-3: 2012, modified)
TS EN 62561-4 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners (IEC 62561-4: 2010, modified)
TS EN 62561-5 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection enclosures and earth electrode seals (IEC 62561-5: 2011, modified)
TS EN 62561-6 Lightning protection system components (LPSC) - Part 6: Rules on lightning impact counters (LSC) (IEC 62561-6: 2011, modified)
TS EN 62561-7 Lightning protection system components (LPSC) - Part 7: Rules on earth-strengthening compounds (IEC 62561-7: 2011, modified)
TS ISO 16813 Building environment design - Indoor environment - General principles
TS ISO 16818 Building environment design - Energy efficiency - Terminology
TS EN 13203-1 Domestic electrical appliances for producing hot water gas - Electrical appliances not exceeding the 300 L water storage capacity and 70 kW heat input - Part 1: Evaluation of hot water supply performance
TSE K 329 Multi-layer roof and facade cladding - For buildings - Hard plastic - Definitions, requirements and test methods
TS EN 442-2 Radiators and convectors-Section 2: Test methods and evaluation
TS EN 442-1 Radiators and convectors-Section 1: Technical specifications and rules
TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods
TS EN 13892-3 Screed materials - Test methods - Part 3: Determination of wear resistance - Böhme
TS EN 12309-3 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 3: Test conditions
TS EN 12309-4 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 4: Test methods
TS EN 12309-5 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 5: Requirements
TS EN 12309-6 Air-conditioning and / or heat pump devices-Gas burner-Absorbable and adsorbed-Net heat input up to 70 kw (including 70 kw)
TS EN 62053-24 Electrical measuring equipment (aa) - Particular requirements - Part 24: Static meters for reactive energy at basic frequency (classes 0,5 S, 1 S and 1)
TS EN 12309-7 Air conditioning and / or heat pump devices - Gas burner - Absorption and adsorption - Net heat input up to 70 kw (including 70 kw) - Part 7: Particular requirements for hybrid devices
TS EN 13141-6 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 6: Exhaust ventilation systems used in a single dwelling "
TS EN 1253-1 Sieves for buildings - Part 1: Floor drains insulated against water with a depth of at least 50 mm
TS EN 1253-2 Sieves for buildings - Part 2: Floor drains and roof drains
TS EN 16430-1 Fan-assisted radiators, convectors and shield convectors - Part 1: Technical specifications and requirements
TS EN 16430-2 Fan-assisted radiators, convectors and shield convectors - Part 2: Test method and evaluation for thermal power
TS EN 16430-3 Fan-assisted radiators, convectors and shield convectors - Part 3: Test method and evaluation for cooling capacity
TS EN 14154-4 Water meters - Part 4: Additional functions
TSE CEN / TR 16787 Industrial Gas Installation - Manual
TS EN 16146 + A1 Sanitary fittings - Removable shower hoses for sanitary fittings in Type 1 and type 2 water supply systems - General specifications
TS EN 14471 + A1: 2015 Chimneys - System chimneys - Plastic smoke lining - Rules and test methods
TS EN 13823: 2010 + A1: 2014 Fire reaction tests for construction products - Thermal products with a single combustion element - Construction products other than slabs
TS EN 13823: 2010 + A1: 2014 Fire reaction tests for construction products - Thermal products with a single combustion element - Construction products other than slabs
TS EN 60335-2-95 Safety regulations - For electrical appliances used in households and similar places - Part 2-95: Particular requirements for drive systems for vertically moving garage doors for residential use
TS EN 60335-2-97: 2006 / A12 Safety regulations - Part for household electrical appliances 2-97: Particular requirements for drive devices for the winding of shutters, awnings, sun visors and similar equipment
TS EN 60335-2-103 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2- 103: Particular requirements for drives for doors, doors and windows
TS HD 60364-4-42: 2011 / A1 Low voltage electrical installation -Part 4-42: Protection for safety -Protection against thermal effects
TS HD 60364-8-1 Low voltage electrical installation - Part 8-1: Energy efficiency
TS EN 1992-1-1 / A1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 1992-1-1 / A1 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 1075 Wooden structures - Test methods - Joints with perforated metal binders
TS EN 16487 Acoustics - Test code for suspended ceilings - Sound absorption
TS EN 16487 Acoustics - Test code for suspended ceilings - Sound absorption
TS EN 12089 Thermal insulation materials for buildings - Determination of bending behavior
TSE CEN / TS 15548-1 Thermal insulation products for building equipment and installations in industrial plants - Determination of thermal resistance by protected hot plate method Section 1: Measurements at elevated temperatures from 100 ° C to 850 ° C
TS EN 12310-2 Flexible sheets for waterproofing - Determination of tear resistance - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 12311-2 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for waterproofing on roofs
TS EN 16309 + A1 Sustainability in buildings - Assessment of social performance of buildings - Calculation methodology
TS EN 15978 Sustainability in buildings - Assessment of environmental performance of buildings - Calculation method
TS EN 15942 Sustainability of construction works - Declaration of environmental products - Inter-company communication format
TS EN 15258 Precast concrete products - Retaining wall elements
TS 13652 Spacers and support elements - For use in reinforced steel reinforcement - Features and performance requirements
TS 13652 Spacers and support elements - For use in reinforced steel reinforcement - Features and performance requirements
TS EN 12365-1 Building equipment - Seals and sealing strips for doors, windows, shutters and curtain walls - Part 1: Performance requirements and classification
TSE CEN / EN 13737-2 Gas infrastructure - Application guide for functional standards prepared by CEN / TC 234 - Part 2: National pages of CEN / TC 234 standards
TS EN 15304 Determination of freeze-thaw resistance of aerated concrete
TS EN 1991-2 / AC Impacts on structures - Part 2: Traffic loads on bridges (Eurocode 1)
TS EN 1991-4 / AC Impacts on structures - Part 4: Silos and tanks (Eurocode)
TS EN 1991-4 Impacts on structures - Part 4: Silos and tanks (Eurocode 1)
TS EN 1991-2 Impacts on structures - Part 2: Traffic loads on bridges (Eurocode 1)
TS EN 14366 Laboratory measurement of noise from wastewater plants
tkt 201497679 Epoxy Resin Based Polymer Bonded Glass Fiber Reinforced Reinforcement Bar
TSE CEN / CLC Guide Guidance for users' access to harmonized European Standards, Eurocodes and National Annexes covered by the 28 Construction Products Regulation ”
TS EN ISO 16032 Acoustics - Measurement of sound pressure levels in buildings caused by service equipment - Engineering method
tst EN 14459 Control functions in electronic systems for gas burners and gas burners - Methods for classification and evaluation
TS EN 14459 Control functions in electronic systems for gas burners and gas burners - Methods for classification and evaluation
TS EN 303-6 Boilers - Part 6: With forced draft burners - Basic features for the domestic hot water operation of combined boilers with atomized liquid fuel burners not exceeding the nominal heat input 70 kW
TS EN 304 / A1 Boilers - Test rules for liquid fuel injection burners
TS EN 304 / A2 Boilers - Test rules for liquid fuel injection burners
TS EN 13496 Thermal insulation products for building applications - Determination of mechanical properties of glass fiber mats used as reinforcement in composite exterior thermal insulation systems with plaster
TS EN ISO 10121-1 Test method for the performance evaluation of air purifying agent and general ventilation devices in the gas phase
TS EN 13224 Precast concrete products - Threaded pavers
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 1168 + A3 Precast concrete products - Hollow slabs
TS EN 15191 Precast concrete products - Classification of glass fiber reinforced concrete performance
TS EN 15422 Precast concrete products - Properties of glass fiber reinforcement material used in mortars and concretes
TS EN 14337 Heating systems for buildings - Design and installation of direct electric room heating systems
TS EN ISO 13791 Thermal performance in buildings - Calculation of temperature in a room without mechanical cooling - General criteria and verification procedures
TS EN 15255 Energy performance of buildings - Calculation of reasonable load for room cooling - General criteria and validation procedures
TS EN 15255 Energy performance of buildings - Calculation of reasonable load for room cooling - General criteria and validation procedures
TS EN 15243 Room temperatures, load and energy calculation for buildings with ventilation room conditioning system for buildings
tst EN 15193 Energy performance in buildings-Energy properties for lighting
tst EN 15193 Energy performance in buildings-Energy properties for lighting
TS EN 15193 / AC Energy performance in buildings-Energy properties for lighting
TS EN 15232: 2012 (EN) Energy performance of buildings - Estimated results of building automation, control and building management
TS EN 15603 Energy performance of buildings - General energy use and description of energy values
TS EN 15459 Energy performance in buildings-Economic evaluation procedure for energy systems in buildings
TS EN 12811-4 Temporary work equipment - Part 4: Scaffolding for scaffolding - Performance requirements and product design
TS EN ISO 140-18 Acoustics - Measurement of sound insulation properties of structures and building elements - Part 18 - Measurement of sound generated by rain falling on building elements in the laboratory
TS HD 60364-5-51 / A11 Electrical installation in buildings - Part 5-51 - Selection and installation of electrical equipment - Common rules
TS EN 13162 + A1 Thermal insulation products for buildings - Fabricated mineral wool (MW) - Specifications
TS EN 13167 + A1 Thermal insulation products - For buildings - Fabricated products with cellular glass (CG) - Specifications
TS EN 13168 + A1 Thermal insulation products - For buildings - Fabricated products with planer chip (WW) - Specifications
TS EN 13171 + A1 Thermal insulation products for buildings - Wood fiber (WF) fabricated products - Specifications
EN 14592: 2008 + A1: 2012 Wooden structures - Dowel fasteners - Requirements
TS EN 14992 + A1 Precast concrete products - Wall elements
TS EN 16005 Power-operated pedestrian doors suitable for pedestrian passage - Safety in use - Rules and test methods
TS EN 13707 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and features
TS EN 13707 + A2 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Descriptions and specifications
TS ISO 11375 Construction machinery and equipment - Terms and definitions
TS EN 15435 Precast concrete products - Normal and lightweight concrete curtain blocks - Product characteristics and performance
TS EN 1991-1-6 Effects on structures Section 1-6: General effects - Impacts during application (Eurocode 1)
TS EN 12811-1 / D1 Temporary work equipment - Part 1: Scaffolding - Performance requirements and overall design
TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and descriptions (ISO 9288: 1989)
TSE K 367 Glass fiber reinforced polymer composite bars for concrete reinforcement
TSE K 366 Polymer Wall and Corner Protection Tapes
TSE K 471 Mold gypsum used in ceramic industry-Features and test methods
tkt 2015101633 Impact Crushers
TSE K 274 Precast concrete sleeper - for low voltage, medium voltage and high voltage lines - Definitions, requirements and test methods
TSE K 391 Impact Crushers
TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems
TS EN ISO 15758 Thermal and moisture performance of building equipment and installations in industrial plants - Calculation of water vapor diffusion - Cold pipe insulation systems
TSE K 496 STRUCTURE ANCHORAGE EXPANSION JOINTS
TS EN 12597 Bitumen and bituminous binders - Terms and definitions
tkt 2015101690 MANUAL ROTATING DOORS
TS EN 12596 Bitumen and bituminous binders - Determination of kinematic viscosity - Vacuum capillary extraction method
TS ISO 11375 Construction machinery and equipment - Terms and definitions
TS EN 12311-2 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof sealing
TS EN 12592 Bitumen and bituminous binders - Determination of solubility
TS EN 12594 Bitumen and bituminous binders - Preparation of test specimens
TS EN 12595 Bitumen and bituminous binders - Determination of kinematic viscosity
TS EN 12607-1 Bitumen and bituminous binders - Determination of hardening resistance under the influence of heat and air - Part 1: RTFOT method
TS EN 12607-2 Bitumen and bituminous binders - Determination of hardening resistance under the influence of heat and air - Part 2: TFOT method
TS EN 12607-3 Bitumen and bituminous binders - Determination of curing resistance under the influence of heat and air - Part 3: RTF method
TS EN 1013 + A1 Transparent, single-skinned, corrugated plastic sheets for roofing, walls and ceilings indoors and outdoors - Requirements and test methods
TS EN 15814 + A2 Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods
TS EN 12102 Air conditioners, liquid cooling packages, heat pumps and dehumidifiers driven by electric compressors for heating and cooling spaces - Measurement of airborne noise - Determination of sound power level
TS EN 15564 Precast concrete products - Resin bonded concrete - Requirements and test methods
TSE CEN / TR 15739 Precast concrete products - Concrete surfaces - Description
TS EN 1991-3 Impacts on structures - Part 3: Impacts of cranes and construction equipment (Eurocode 1)
TS EN 15498 Precast concrete products - Concrete block blocks with wood chip - Product characteristics and performance
TSE K 379 Bathroom Accessories
TS ISO 18650-2 Building construction machinery and equipment - Concrete mixers - Part 2: Procedure for examining mixing efficiency
TS HD 60364-7-718 Low-voltage electrical installations - Part 7-718: Rules for special installations or spaces - Public areas and workplaces (IEC 60364-7-718: 2011)
TS EN 13693 + A1 Precast concrete products - Special roof elements
TS EN 14721 + A1 Metal fiber concrete - Test method - Measurement of fiber content in fresh and hardened concrete
TS EN 442-1 Radiators and convectors-Section 1: Technical specifications and rules
TS EN 442-2 Radiators and convectors-Section 2: Test methods and evaluation
tkt 2015101929 CONSTRUCTION IRON CUTTING, BENDING MACHINES
TSE K 425 Decorative lighting poles - used in parks and gardens
TSE K 502 TWO AND THREE WAY TAPS
TSE K 449 Door systems - Sliding, sliding doors with glass panels
tst 13565 Insulated laminated sandwich lightweight units
TS EN 12480 Gas meters - Rotary displacement gas meters
TS EN 1469 Natural stone products - Plates used in veneer - Specifications
TS EN 12057 Natural stone products - Modular tiles - Specifications
TS EN 12058 Natural stone products - Slab and stair cladding slabs - Specifications
TS EN 12050-1 Wastewater lifting plants for buildings and settlements - Part 1: Wastewater lifting plants for faeces
TS EN 12050-2 Wastewater lifting plants for buildings and settlements - Part 2: Wastewater lifting plants without feces
TS EN 12050-3 Wastewater lifting plants for buildings and residential areas - Part 3: Lifting plants for limited applications
TS EN 12050-4 Wastewater lifting plants for buildings and settlements - Part 4:: One-way valves for wastewater with and without feces
TS EN 13120: 2009 + A1: 2014 / AC Interior blinds - Performance requirements including safety
TSE K 394 Espagnolette Provisions
TSE K 405 Coupling espagnolettes for woodwork and PVC joinery
tkt 2015102210 AUTOMATIC SHUTTER AND DOOR SYSTEMS
TS 12655 / T1 Steel doors, burglar resistant
TS EN 13169 + A1 Thermal insulation products - For buildings - Fabricated products with expanded perlite sheet (EPB) - Specifications
TS EN 13170 + A1 Thermal insulation products - For buildings - Fabricated products with expanded cork (ICB) - Specifications
TS EN 16012 + A1 Thermal insulation for buildings - Reflective insulation products - Determination of declared thermal performance
TS EN 16069 + A1 Thermal insulation products for buildings - Fabricated products made of polyethylene foam (PEF) - Specifications
TS EN 16153 + A1 Polycarbonate (PC) flat sheets - Transparent - Closed corrugated (with chamber) - Used in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
TS ISO 21573-2 Construction machinery and equipment-Concrete pump - Part 2: Procedure for the examination of technical parameters
tst EN 1999-1-1 Design of aluminum structures - Part 1-1: General structural rules (Eurocode 9)
tst EN 1999-1-1 Design of aluminum structures - Part 1-1: General structural rules (Eurocode 9)
tst EN 1997-1 Geotechnical design - Part 2: General rules (Eurocode 7)
TS EN 16497-1 Chimneys - Concrete System Chimneys - Part 1: Unstable smoke duct applications
TS EN ISO 13845 Plastic pipe systems - Joints made of ring-type elastomeric seal for thermoplastic pressure pipes - Test method for sealing under internal pressure and angular bending
TS EN ISO 13844 Plastic pipe systems - Joints with elastomeric sealing ring type pipe heads used with pressure plastic pipes - Test method for sealing under vacuum, angular deflection and deformation
TS EN 12480 Gas meters - Rotary displacement gas meters
TS ISO 21573-2 Construction machinery and equipment-Concrete pump - Part 2: Procedure for the examination of technical parameters
TSE K 376 Steel Insulator Pipe Fittings
TSE K 415 Polyurethane Topcoat Alkyd Based - Two Component
TSE K 415 Polyurethane Topcoat Alkyd Based - Two Component
tkt 2015102413 Epoxy based anchoring compound
TSE K 435 Sanitary Wares - Sinks Used in Home and Similar Places - From Cross-linked Cast Acrylic Sheets - Specifications
TS EN 12327 Gas supply systems - Pressure test, commissioning and decommissioning - Functional requirements
TS EN 303-1 / A1 Boilers - Part 1: Boilers with forced draft burners - Terms and definitions, general requirements, tests and marking
TS EN 14992 + A1 Precast concrete products - Wall elements
TS EN 12309-1 Air-conditioning and / or heat pump devices-Gas burner-Absorption and adsorption-Net heat input up to 70 kw (including 70 kw) -Chapter 1: Terms and definitions
TS EN ISO 15957 Test powders for the evaluation of air cleaning equipment (ISO 15957: 2015)
TSE K 499 INSULATION GLASS UNIT (FROM ALUMINUM ALLOY MATERIAL) INTERIOR SPACE PROFILE
TSE K 499 INSULATION GLASS UNIT (FROM ALUMINUM ALLOY MATERIAL) INTERIOR SPACE PROFILE
TSE K 169 / T1 Plastic pipe systems - Used for disposal of cold and hot wastewater in the building - Made of mineral doped polypropylene (PP) - Features of soundproof pipes, fittings and system
tst EN 1065 Adjustable telescopic steel struts - Product specification, design, calculation and test evaluation
TSE K 446 Accordion Door - Plasticizer Unpolished Polyvinyl Chloride (PVC-U)
TS 13687 Cement-based plaster - for thermal insulation board
TS 13729 Thermal insulation products for buildings - Gas concrete board - Specifications
TS 13729 Thermal insulation products for buildings - Gas concrete board - Specifications
TS 13694 Toilet Seats - Plastic
TS EN 1555-1 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 1: General
TSE K 463 Copper busbars - Annealed and tinned flexible braided - Construction and tests
TSE K 456 Water heater and boiler combustion chamber insulation plate
TS EN 16194 Portable toilet cubicles without waste water connection - Requirements for products and sanitary products and services for the installation of cabinets
TS EN 16034 Pedestrian door sets, industrial, commercial, garage doors and opening windows - Product standard, performance and features angFire resistance and / or smoke control features
TS EN 15037-1 / D1 Precast concrete products - Threaded flooring systems - Part 1: Beams
TSE K 473 Solar energy systems for roofs: Structural connection requirements for solar panels
TSE K 473 Solar energy systems for roofs: Structural connection requirements for solar panels
TS EN 14066 Natural stones - Test methods - Determination of the resistance to wear by thermal shock
Bus stops for TSE K 474 city transport
10970 / T2 Forms - Permission to use structure
TS 3523 Determination of surface moisture content of concrete aggregates
TS ISO 4190-5 Elevators and service lifts - Part 5: Control devices, signals and additional connections
TS ISO 15686-1 Buildings and built assets - Life cycle planning - Part 1: General principles and framework
TS ISO 15686-2 Buildings and built assets - Life cycle planning - Part 2: Operations to estimate life cycle
TS ISO 15686-7 Buildings and built assets - Life cycle planning - Part 7: Performance evaluation of application data
TS ISO 15686-8 Buildings and built assets - Life cycle planning - Part 8: Reference life cycle and life cycle estimation
TS ISO 16817 Building Environmental design - Interior - Design process for the visible environment
TS EN 12390-11 Hardened concrete tests-Determination of concrete chloride resistance, one-way diffusion
TS EN 771-1: 2011 + A1 Masonry units - Specifications - Part 1: Clay masonry units
TS EN 771-2: 2011 + A1 Masonry units - Specifications - Part 2: Lime sandstone masonry units
TS EN 771-3: 2011 + A1 Masonry units - Specifications - section 3: Concrete masonry units (dense and light aggregate)
TS EN 771-4: 2011 + A1 Masonry units - Specifications - Part 4: Aerated concrete masonry units
TS EN 771-5: 2011 + A1 Masonry units - Specifications - Part 5: Artificial stone masonry units
TS EN 771-6: 2011 + A1 Masonry units - Specifications - Part 6: Natural stone masonry units
TS ISO 4866 Mechanical vibration and shock - Vibration of buildings - Guidance for measuring vibration and evaluating effects on buildings
TSE K 480 Flat sheets - Manufactured using magnesium oxide and magnesium chloride - Product properties and test methods
TS EN 1097-2 / D1 Tests for mechanical and physical properties of aggregates - Part 2: Methods for determination of fragmentation resistance
TS ISO 3934 Vulcanized and thermoplastic tires - Preformed gaskets for construction - Classification, determination and test methods
tkt 2015103654 Expandable Polystyrene Raw Material with Flame Retardant Properties
TS EN 771-1 + A1 Masonry units - Specifications - Part 1: Clay masonry units
TS EN 771-2 + A1 Masonry units - Specifications - Part 2: Lime sandstone masonry units
TS EN 771-3 + A1 Masonry units - Specifications - Part 3: Concrete masonry units (Dense and light aggregate)
TS EN 771-4: 2011 + A1 Masonry units - Specifications - Part 4: Aerated concrete masonry units
TS EN 771-5: 2011 + A1 Masonry units - Specifications - Part 5: Artificial stone masonry units
TS EN 771-6: 2011 + A1 Masonry units - Specifications - Part 6: Natural stone masonry units
TS EN 12390-11 Hardened concrete tests-Determination of resistance of concrete to chloride ions, one-way diffusion
tst EN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints
TS EN 1993-1-8 / tst AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)
TS EN 1993-1-8 / tst AC Design of steel structures - Part 1-8: General rules - Design of joints (eurocode 3)
TSE CEN / TR 16797-1 Building materials: Hazardous substances release assessment -Stational assessment of declared values-Section 1-Principles and application rules
TS EN 459-3 Building lime-Part 3: Compliance
TS EN 14428 Shower cubicles - Functional requirements and test methods
TS EN 997 + A1 One piece toilet bowl with flush toilet
tst EN 1469 Natural stone products - Plates used in cladding - Specifications
TS EN 12057 Natural stone products - Modular tiles - Requirements
tst EN 12058 Natural stone products - Slab and stair cladding slabs - Specifications
TS 13565 / T2 Sandwich lightweight masonry units with insulation layer
TS ISO 18650-1 Building construction machinery and equipment - Concrete mixers - Part 1: Terms and general features
TS EN 81-72 Lifts - Safety regulations for construction and installation - Special applications for passenger and freight elevators section 72: Firefighting lifts
TS EN ISO 25745-2 Energy performance of elevators, escalators and moving walks - Part 2: Energy calculation and classification for elevators (elevators)
TS EN ISO 25745-3 Energy performance of elevators, escalators and moving walks - Part 3: Energy calculation and classification of escalators and escalators (ISO 25745-3: 2015)
TS EN 536 Road construction machines - Asphalt mixing plants - Safety regulations
TS EN 13203-2 Gas-fired appliances-Indoor-Hot water-generating devices 300litre water storage capacity and heat input 70kw'e devices section 2: Evaluation of energy consumption
TS EN 26 For hot water production Gas-fired, atmospheric burners Instantaneous water heaters (water heaters)
TS EN 89 Water Heaters (storage water heaters) -Gas burner-For home use
TS EN 15502-1 + A1 Gas-fired boilers - Part 1: General rules and tests
TS EN 834 / AC Heat cost splitters-Radiators used in determining heat consumption -Working with electrical energy
TS EN 13141-11 Ventilation for buildings - Performance testing of components / products for residential ventilation - Part 11: Supply ventilation units
TS EN 16211 Ventilation for buildings - Air Measurement sites - Methods
TS EN ISO 11855-2 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 2: Design heating determination and cooling capacity (ISO 11855-2: 2012)
TS EN ISO 11855-2 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 2: Design heating determination and cooling capacity (ISO 11855-2: 2012)
TS EN ISO 11855-3 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3: 2012)
TS EN ISO 11855-3 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3: 2012)
Building environment design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 11855: Dimensioning and calculation of dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 4-4: 11855)
Building environment design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 11855: Dimensioning and calculation of dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 4-4: 11855)
TS EN ISO 11855-5 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5: 2012)
TS EN ISO 11855-5 Building environmental design - Design, sizing, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5: 2012)
TS EN 13384-2 Chimneys - Methods for calculating heat and fluid dynamics - Part 2: Chimneys connected to multiple heating devices
TSE CLC / TS 50568-4 Electrical meter data exchange - Part 4: Low-layer PLC profile using SMITP B-PSK PLC modulation
TSE CLC / TS 50568-8 Electrical meter data exchange - DLMS / COSEM layer - Part 8: SMITP PLC B-PSK communication profile, SMITP Local data exchange profile and SMITP B- for neighboring networks, including Original SMITP communication profile PSK PLC communication profile
TSE CLC / TS 50590 Electrical meter data exchange - Low-layer PLC profile using Adaptive Multi-Carrier Propagation pSpectrum (AMC-SS) modulation
TSE CLC / TS 52056-8-4 Electrical meter data exchange - DLMS / COSEM layer - Part 8-4: Narrow-band OFDM PRIME PLC communication profile for neighboring networks
TSE CLC / TS 52056-8-5 Electrical meter data exchange - DLMS / COSEM package - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighboring networks
TSE CLC / TS 52056-8-7 Electrical meter data exchange - DLMS / COSEM layer - Part 8-7: AMC-SS PLC communication profile for neighboring networks
TS EN 14055 + A1 WC and dissipation tanks
TS EN 60335-2-95: 2015 / A1 Safety regulations - For electrical appliances used in homes and similar places - Part 2-95: Particular requirements for drive systems for vertically moving garage doors for residential use
TS EN 1004 Mobile access and work towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
TS EN 1113 Sanitary fittings - General technical specifications - Type 1 and type 2 water supply systems, shower hoses for sanitary fittings
TSE EN 16572 Conservation of cultural heritage - Glossary of technical terms related to masonry mortars, renders and plasters used in cultural heritage
TS EN 459-1 Building lime - Part 1: Definitions, specifications and eligibility criteria
TS EN 12217 Doors - Operating forces - Necessary features and classification
TS EN 13830 Façade - Product standard
Tests for geometric properties of aggregates - Part 933: Determination of fine grains - Determination of sand equivalent
TS EN 13561 Exterior blinds - Performance requirements including safety
TS EN 13659 Shutters - Performance requirements including safety
TS EN 480-13 Chemical additives - For concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for tests of mortar chemical additives
772: 1 + A2011 Masonry units - Test methods - Part 1: Determination of compressive strength
TS EN 1303 Building hardware - Lock cylinders - Specification and test methods
TS EN 16687 Construction products - Evaluation of release of hazardous substances - Terminology
TS EN 14216 Cement - Special cements - Very low temperature - composition, properties and conformity criteria
TS EN 13637 Building equipment-Electrical exit systems for escape routes-Requirements and test methods
TS EN 15743: 2010 + A1 Super sulphate cements - Composition, properties and conformity criteria
TS EN 16580 Windows and doors - Resistance of door leaves to splash water and wetness - Test and classification
TS EN 1993-1-4 / A1 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-4 / A1 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 16627 Sustainability of construction work - Sustainable inspection of buildings - Calculation methods
TS 13709 Lightning protection - lightning rods
TS EN ISO 10140-3 / A1 Acoustics - Laboratory measurement of sound insulation in building elements - Part 3: Measurement of impact sound insulation - Modified 1
TS EN 62056-1-0 Electricity meter data exchange - DLMS / COSEM layer - Intelligent meter standardization structure (IEC 62056-1-0: 2014)
TS 1475-2 Applications with gypsum board - Part 2: Rules for the application of curtain wall
TS 1475-2 Applications with gypsum board - Part 2: Rules for the application of curtain wall
TS 1475-3 Applications with plasterboard - Part 3: Rules for the application of suspended ceilings
TS 1475-3 Applications with plasterboard - Part 3: Rules for the application of suspended ceilings
TS 1475-4 Applications with plasterboard - Part4: Rules for the application of finishing works
TS 1475-4 Applications with plasterboard - Part4: Rules for the application of finishing works
TS 1475-1 Applications with gypsum board - Part 1: Partition wall application rules
TS 1475-1 Applications with gypsum board - Part 1: Partition wall application rules
TS EN ISO 11855-1 Building environmental design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definitions, symbols and comfort criteria (ISO 11855-1: 2012)
TS EN ISO 11855-1 Building environmental design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definitions, symbols and comfort criteria (ISO 11855-1: 2012)
TS EN 12730 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to static loads
TS EN 1426 Bitumen and bituminous binders - Determination of needle penetration depth
TS EN 1427 Bitumen and bituminous binders - Determination of softening point - Ring and ball method
TS EN 12606-1 Bitumen and bituminous binders-Determination of paraffin wax content-Part 1: Distillation method
TS EN 12593 Bitumen and bituminous binders - Fraas break / break point determination
TS EN 13407 Suspended urinals - Functional requirements and test methods
TS EN 14296 Sanitary applications - Public washing troughs
TS EN 12764 Sanitary wares - Technical specifications for swirl bathrooms
TS EN 14528 Bidets - Functional requirements and test methods
TS EN 14688 Sanitaryware - Washbasins - Functional requirements and test methods
TS EN 13381-9 Test methods for the determination of the contribution of fire resistance of structural elements - Part 9: Fire protection systems for web spans steel beams
tst 3078-1 Seals used as waterstops in joints in concrete structures - Thermoplastic - Part 1: Definitions and shape characteristics
tst 3078-2 Sealing seals used as waterstops in joints in concrete structures - Thermoplastic - Part 2: Material requirements, tests and inspections
TS 10326 Construction Machinery - Concrete Vibrators (Immersion Type)
TS 10276 Filters - Used in internal gas installations
tst 2015104593 Sealing rules for joints in concrete structures with water retaining gasket
TS EN 1993-1-1 / tst A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)
TS EN 1993-1-1 / tst A1 Design of steel structures - Part 1-1: General rules and rules for buildings (Eurocode 3)
TS 4203 Concrete - Fresh concrete tests - Determination of mixer efficiency
TSE K 480 / T1 Magnesium oxide based building panels - product properties and test methods
TS EN 13808 Bitumen and bituminous binders - General principles for the identification of cationic bitumen emulsions
tst EN 1993-1-10 Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (Eurocode 3)
TS EN 1993-1-10 / tst AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)
TS EN 1993-1-10 / tst AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)
tst EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components
tst EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components
TS EN 1993-1-11 / tst AC Design of steel structures - Part 1-11: Design of structures with tension components (eurocode 3)
TS EN 1993-1-11 / tst AC Design of steel structures - Part 1-11: Design of structures with tension components (eurocode 3)
tst EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade
tst EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade
TS EN 1993-1-12 / tst AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)
TS EN 1993-1-12 / tst AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)
tst EN 1993-1-3 Eurocode 3: Design of steel structures - Part 1-3: General requirements - For cold-formed thin-gauge elements and sheet metal
TS EN 1993-1-3 / tst AC Eurocode 3 - Part 1-3: General rules - Supplementary rules for cold-Formed members and sheeting
TS EN 1993-1-3 / tst AC Eurocode 3 - Part 1-3: General rules - Supplementary rules for cold-Formed members and sheeting
tst EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
tst EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
Eurocode 1993: Design of steel structures - Part 1-4: General rules - Additional rules for stainless steel TS EN 1-3-1
Eurocode 1993: Design of steel structures - Part 1-4: General rules - Additional rules for stainless steel TS EN 1-3-1
tst EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect
tst EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect
TS EN 1993-1-5 / tst AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)
TS EN 1993-1-5 / tst AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)
tst EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures
tst EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures
TS EN 1993-1-6 / tst AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)
TS EN 1993-1-6 / tst AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)
tst EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates
tst EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates
TS EN 1993-1-7 / tst AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)
TS EN 1993-1-7 / tst AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)
tst EN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints
tst EN 1993-1-9 Eurocode 3: Design of steel structures - Part 1-9: General rules - Fatigue
TS EN 1993-1-9 / tst AC Design of steel structures - Part 1-9: Fatigue (eurocode 3)
tst EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges
tst EN 1993-2 Eurocode 3: Design of steel structures - Part 2: Steel bridges
TS EN 1993-2 / tst AC Design of steel structures - Part 2: Steel bridges (eurocode 3)
TS EN 1993-2 / tst AC Design of steel structures - Part 2: Steel bridges (eurocode 3)
tst EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles
tst EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles
TS EN 1993-3-1 / tst AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)
TS EN 1993-3-1 / tst AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)
tst EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
tst EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
tst EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
tst EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos
tst EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos
TS EN 1993-4-1 / tst AC Design of steel structures - Part 4-1: Silos (eurocode 3)
TS EN 1993-4-1 / tst AC Design of steel structures - Part 4-1: Silos (eurocode 3)
tst EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses
tst EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses
TS EN 1993-4-2 / tst AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)
TS EN 1993-4-2 / tst AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)
tst EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
tst EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS EN 1993-4-3 / tst AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
TS EN 1993-4-3 / tst AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
tst EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles
tst EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles
tst EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
tst EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
TS EN 1993-6 / tst AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS EN 1993-6 / tst AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS EN 1993-5 / tst AC Design of steel structures - Part 5: Piles (eurocode 3)
TS EN 1993-5 / tst AC Design of steel structures - Part 5: Piles (eurocode 3)
tst EN 13163 + A2 Thermal insulation products - For buildings - Fabricated products of expanded polystyrene (EPS) - Specifications
tst EN 997 + A1 Integrated flush toilets and closet sets
tst EN 14055 + A1 WC and urinal cisterns
tst EN 13407 Suspended urinals - Functional requirements and test methods
tst EN 14528 Bidets - Functional requirements and test methods
TS EN 14688 Sanitary Wares - Sinks - Functional requirements and test methods
TS ISO 21573-1 Building construction machinery and equipment - Concrete pumps - Part 1: Terms and commercial specifications
TS ISO 1920-10 Concrete tests-Part 10: Determination of static elastic modulus under pressure
tst 2015105379 Guidance for mass concrete design and determination of proportions
TS HD 60364-4-43 Low voltage electrical installations - Part 4-43: Safety protection - Overcurrent protection (IEC 60364-4-43: 2008, modified + corr. October 2008)
TSE CEN / TS 1187 Test methods for roofs exposed to external fire
TS EN 50440 Efficiency and test methods of household electric storage water heaters
TS HD 60364-7-704 / AC Low-voltage electrical installations - Part 7-704: Rules for special installations or locations - Installations on construction and demolition sites
TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements
TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements
TS EN 14303 Thermal insulation products - For building installation and industrial applications - Fabricated mineral wool products - Features
TS EN 14313 Thermal insulation products - For building installation and industrial applications - Fabricated polyethylene foam (pef) products - Specifications
tst EN 13618 Flexible connection hoses for drinking water installations - Functional specifications and test methods
TS 12255 Authorized Services - Elevator Maintenance Services - Rules
TS EN 459-1 Building lime - Part 1: Definitions, specifications and conformity criteria
tst 579 / T4 Valves and fittings (for radiators)
TS 13515 / T1 Complementary standard for the implementation of TS EN 206
TS 13515 / T1 Complementary standard for the implementation of TS EN 206
TSE K 506 Metal constructions for terrestrial solar power plants - Structural design, production, inspection and testing methods
TS 8737 / T2 Building permit
TS 13264 / tst T1 Forms - Burning and demolished structures form
tst 2016105972 Sustainable green building design and construction principles
TS 13633 Rules for complete and partial demolition of structures
TS EN 16025-1 Thermal and / or soundproofing products for building construction - Connected EPS - Part 1: Pre-mixed dry EPS mortar in the factory
TS EN 16025-2 Thermal and / or soundproofing products for building construction - Connected EPS - Part 2: Processing of pre-mixed dry EPS mortar in the factory
tst 2015105472 (TSE K 480) Flat plates - Manufactured using magnesium oxide and magnesium chloride - Product properties and test methods
TSE K 308 / T1 Organic or inorganic binder coatings applied indoors
TS ISO 13007-1 Ceramic tiles - Sorbets and binders - Part 1: Terms, descriptions and specifications for binders
TS ISO 13007-2 Ceramic tiles - Sorbets and binders - Part 2: Test methods for binders
TS ISO 13007-4 Ceramic tiles - Sorbets and binders - Part 4: Test methods for sorbets
TS ISO 13007-4 Ceramic tiles - Sorbets and binders - Part 4: Test methods for sorbets
TS ISO 13007-3 Ceramic tiles - Sorbets and binders - Part 3: Terms, descriptions and specifications for sorbets
TS ISO 13007-5 Ceramic tiles - Sorbets and binders - Part 5: Requirements, test methods, conformity assessment and brief demonstration of waterproofing membranes applied as binders under the bonded ceramic tile
TS ISO 13007-5 Ceramic tiles - Sorbets and binders - Part 5: Requirements, test methods, conformity assessment and brief demonstration of waterproofing membranes applied as binders under the bonded ceramic tile
tst EN 12015 Electromagnetic compatibility - Product family standard for elevators, escalators and escalators - Emission
TS EN 488 Central heating pipes - Pre-insulated pipe systems for direct buried hot water networks - Steel valve assembly for polyurethane heat-insulated, polyethylene outer casing steel service pipes
TS ISO 21930 Sustainability in buildings - Environmental declarations of building materials
TS ISO 21929-1 Sustainability in buildings - Sustainability indicators - Part 1: List of key indicators for systems and structures for the development of indicators
TS ISO 21931-1 Sustainability in buildings - System for methods for assessing the environmental performance of construction applications - Part 1: Buildings
TS ISO 15392 Sustainability in buildings - General principles
TS ISO / TS 12720 Sustainability in buildings and civil engineering applications - Guidelines for the application of general principles in ISO 15392
tst EN 12016 Electromagnetic compatibility - Product family standard for elevators, escalators and conveyors - Immunity
TS EN 12016 Electromagnetic compatibility - Product family standard for elevators, escalators and conveyors - Immunity
TS ISO 4635 Tires-Preformed joint fillers-For joints between concrete pavements on highways
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
TS 13565 Insulated laminated sandwich lightweight units
TS EN 13279-2 / D1 Building gypsum and plaster - Part 2: Test methods
tst EN 13162 + A1 Thermal insulation products - For buildings - Fabricated mineral wool (MW) - Specifications
tst EN 13164 + A1 Thermal insulation products for buildings - Fabricated products with extruded polystyrene foam (XPS) - Specifications
tst EN 13165 + A2 Thermal insulation products - For buildings - Rigid polyurethane foam (PU) fabricated products - Specifications
TS EN 14304 Thermal insulation products for installation and industrial applications - Factory made flexible elastomeric foam (fef) products - Specifications
TS EN 14304 Thermal insulation products for building equipment and installations in industrial plants - Fabricated flexible elastomeric foam (FEF) products - Specifications
tst EN 12464-2 Light and lighting - Lighting of workplaces - Part 2: Outdoor workplaces
TSE K 325 / T1 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TSE K 325 / T1 Acrylic Solid Surfaces - Kitchen Sinks and Wall Coverings
TS 13744 Adhesion enhancing acrylic dispersion primers for plasters and adhesives - Specifications
TS EN 15388 / D1 Agglomerated stones - Plates and dimensional products for bathroom and kitchen worktops
TS 2902 Glazed bricks
TSE CEN / TS 15680 Prefabricated wooden stairs - Mechanical test methods
TS 10880 Expansion Joints - Steel bellows - Used in gas pipelines and installations
TS ISO 12491 Statistical methods for quality control of building materials and components
tst 2016107915 Plastic jacket anchors - Used for fixing exterior thermal insulation
TS ISO 2394 General principles for security of buildings
TS ISO 2394 General principles for security of buildings
TS EN 1110: 2010 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of yield strength at high temperatures
TS EN 1297 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Artificial aging methods with long-term exposure to UV radiation, high temperature and water combination
TS EN 12691 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of impact resistance
TS EN 12730 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to static loads
TS EN 13583 Flexible sheets for waterproofing - Bituminous, plastic and rubber sheets for waterproofing on roofs - Determination of resistance to impact impact of solid grains
tst EN 12039 Flexible sheets for waterproofing - Bituminous sheets for roof waterproofing - Determination of adhesion to granules
TS EN 13897 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof insulation - Determination of water tightness after stretching at low temperature
TS EN 13948 Waterproofing-Flexible sheets-Bitumen, plastic and rubber sheets used in waterproofing of roofs- Determination of resistance to penetration of plant roots
TS EN 12405-3 Gas meters - Conversion devices - Part 2: computer flow
TS HD 60364-4-443 Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Substance 443: Protection against atmospheric and switching overvoltages
TS HD 60364-5-534 Low voltage electrical installations - Part 5 - 53: Selection and installation of electrical equipment - Separation, switching and control - Part 534: Surge protection devices
TS EN 1628 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance under static loading
TS EN 1629 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance under dynamic loading
TS EN 1630 + A1 Door sets, windows, curtain walls, guardrails and louvers for pedestrians - Burglar resistant - Test method for determining resistance to manual theft interference
TS EN 1873 + A1 Auxiliary equipment for roofs - Plastic, single roof skylights - Product specifications and test methods
TS EN 14196 Geosynthetics - Test methods - Determination of unit area mass of clay geosynthetic barriers
Hygothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion TS EN ISO 15148 / A1
TS EN 494 + A1 Corrugated sheets and fittings - Manufactured using fiber-reinforced cement - Product specifications and test methods
TS EN ISO 9972 Thermal performance of buildings- Determination of air permeability of buildings - Holding pressure under fan pressure
TS EN 14516 Bathtubs - For household and similar use
TS EN 15719 Sanitaryware - Baths made of impact-resistant extruded abs / acrylic sheets - Specifications and test methods
TS HD 60364-7-722 Low-voltage electrical installations - Rules for special facilities and locations - Supply of electric vehicles
TS EN 1381 Wooden structures - Test methods - Load bearing connections made using hooks
TS EN 1382 Wooden structures-Test methods-Retracting capacity of wood binders
TS EN 1383 Wooden structures-Test methods-Resistance of wooden elements to the tensile strength of wooden binders
TS EN 62858 Lightning intensity (LLC) based on lightning protection systems - General rules
Impacts on structures - Part 1991-1: General effects - Snow loads (eurocode 3) TS EN 2003-1-1: 3 / A1
TS EN 16622 Silica calcium fume for concrete - Definitions, requirements and eligibility criteria
TSE CEN / TR 15728 Precast concrete elements - Design and use of studs for lifting and transporting elements
TS EN 16508 Temporary work equipment - Curtain walls - Performance requirements and overall design
TS EN 16508 Temporary work equipment - Curtain walls - Performance requirements and overall design
TS EN ISO 16283-3 Area measurement of sound insulation in acoustic-structural elements and structures - Part 3: Sound insulation in the first stage
TS EN ISO 16283-3 Area measurement of sound insulation in acoustic-structural elements and structures - Part 3: Sound insulation in the first stage
TS EN ISO 16283-2 Sound measurement of acoustic components and structures - Part 2: Impact sound insulation
TS EN ISO 16283-2 Sound measurement of acoustic components and structures - Part 2: Impact sound insulation
TS EN 16703 Acoustics - Test rule for steel screwed gypsum board systems - Insulation of airborne sound
TS EN 16703 Acoustics - Test rule for steel screwed gypsum board systems - Insulation of airborne sound
TS 12558 Authorized Services - Door, window and barrier systems - Rules
TS EN 13381-3 Test methods for the determination of the contribution of structural elements to fire resistance - Part 3: Protection applied to concrete elements
TS EN 15650 Ventilation and fire dampers in buildings
TS CWA 16975 Economically efficient intermediate stations for district heating
TS EN 13084-6: 2015 Chimneys-Free-standing 6: Steel linings - Design and application
TSE CEN / TS 16850 Community and Citizen Safety - Guidance for managing safety in healthcare facilities
TS HD 60364-5-53 Low voltage electrical installations - Part 5-53: Selection and installation of electrical equipment - Switchgear and controlgear
TS 13780 Waterproofing products for ceramic tiles - Application rules
TS EN 16475-7: 2016 Chimneys - Accessories - Part 7: Rain caps - Specifications and Test Methods
TS ISO 3869 Composite anglomera mushroom (composite cork) - Used as filler material in expansion joints in buildings and buildings - Descriptive properties, packaging and marking
TS EN 16654 Child protection products - Consumer-compatible finger protection devices for doors - Safety rules and test methods
TS EN 14037-1 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºC - Part 1: Ceiling mounted radiant panels ready for ambient heating - Technical specifications and requirements
TS EN 14037-2 120 Ceiling-mounted irradiation panels with water supply below ° C - Part 2: Ceiling mounted radiant panels ready for ambient heating - Test method for thermal output
TS EN 14037-3 120 Ceiling-mounted irradiation panels with water supply below ° C - Part 3: Ceiling mounted radiant panels ready for ambient heating - Evaluation method and evaluation of radiant thermal output
TS EN 81-73 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 73: Behavior of elevators in case of fire
TS 13515 / T2 Complementary standard for the implementation of TS EN 206
TS 13515 / T2 Complementary standard for the implementation of TS EN 206
TS EN ISO 10545-14 Ceramic tiles - Part 14: Determination of stain resistance
TS EN 16578 Ceramic sanitary ware - Sustainability assessment
TS ISO 3867 Combined anglomerate fungus (composite fungus) - Expansion joint filler materials - Test methods
TS EN ISO 7622-2 Steel braided conveyor belts-Longitudinal tensile test-Part 2: Measurement of tensile strength
tst EN 81-72 Lifts - Safety regulations for construction and installation - Special applications for passenger and freight elevators Section 72: Firefighting lifts
TS EN 81-73 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 73: Behavior of elevators in case of fire
TSE CEN / TS 115-4 Safety on escalators and escalators - Comments on EN 115-originated standards
TS EN 14428 Shower cabinets - Functional requirements and test methods
TS ISO 3869 Composite anglomera mushroom (composite cork) - Used as filler material in expansion joints in buildings and buildings - Descriptive properties, packaging and marking
TS HD 60364-4-41 / D1 Low voltage electrical installations - part 4 - 41: Protection for safety - Protection against electric shock
TS EN 16659 Bitumen and bituminous binders-Multiple creep stress and recovery test (MSCRT)
tst 2810-1 Sealing seals used as waterstops in joints in concrete structures - Elastomer - Part 1: Definitions and shape characteristics
TS EN 14308 Thermal insulation products - For building installation and industrial applications - Fabricated hard polyurethane (pur) and hard polyisocyanate (pır) foam products - Features
Hygothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion TS EN ISO 15148 / A1
TSE K 480 / T2 Flat plates - Manufactured using magnesium oxide and magnesium chloride - Product properties and test methods
TS EN 16724 Thermal insulation products for building applications - Installation and fixing instructions for determining the reaction of external composite thermal insulation systems to fire
TS EN 15501 Thermal insulation products for building equipment and industrial applications - Factory made (prefabricated) expanded perlite (EP) and Scaly vermiculite (EV) products - Specifications
TS EN 14314 Thermal insulation products - For building installation and industrial applications - Fabricated phenolic foam (pf) products - Specification
TS EN 14309 Thermal insulation products - For building installation and industrial applications - Fabricated expanded polystyrene (eps) products - Features
TS EN 14307 Thermal insulation products - For building installation and industrial applications - Fabricated polystyrene (xps) foam products
TS EN 14306 Thermal insulation products - For building installation and industrial applications - Fabricated calcium silicate (cs) products - Features
TS EN 14305 Thermal insulation products -For building installation and industrial applications -Propored glass (cg) products manufactured by fabrication -Features
TS EN ISO 6781-3 Glass used in buildings - Determination of heat, air and moisture irregularities in buildings using infrared methods - Part 3: Qualification of device users, data analysts and reporters
TS EN 1303 Building hardware - Lock cylinders - Requirements and test methods
TS EN 81-20 / D1 Elevators - Safety regulations for construction and installation - Elevators for human and freight transport - Part 20: Elevators for people and goods
TS EN 50193-2-1 Electric instantaneous water heaters - Part 2-1: Performance Measurement Methods -Multifunctional electric instant water heaters
TSE K 161 Lightweight masonry units - Made of glass fiber reinforced composite
TS EN 61140 Protection against electric shock - common features for installations and equipment
TS HD 60364-5-551 / A11 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment - Group 55: Other equipment - Part 551: Low voltage generator sets
TS HD 60364-7-712 Electrical installation in buildings - Part 7-712: Requirements for special installations and locations - Solar photovaltaic (pv) power supply systems
TS HD 60364-5-557 / A11 Electrical installation in buildings - Part 5-557: Selection and installation of electrical equipment - Auxiliary circuits
TS 10970 / T3 Forms - Building use permit
TS EN 1253-4 Strainers - Used in buildings - Part 4: Inlet covers
TS EN 1253-3 Strainers - Used in buildings - Part 3: Quality control
TS EN 1026 Doors and windows - Air permeability - Test method
TS EN 1027 Doors and windows - Waterproofing - Test method
TS EN 1052-2 Masonry test methods - Part 2: Determination of flexural strength
TS EN 772-5 Masonry units - Test methods - Part 5: Determination of active soluble salt content of clay masonry units
TS EN 12209 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
TS EN 12210 Windows and doors - Resistance to wind load - Classification
TS EN 12211 Windows and doors - Resistance to wind load - Test method
TS EN 13914-1 Design, preparation and application of exterior and interior plasters - Part 1: Exterior plaster
TS EN 50310 Equivalent bonding and grounding application - for buildings with information technology equipment
TS EN 13914-2 Design, preparation and application of external and internal plasters - Part 2: Internal plasters
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 196-1 Cement test methods - Part 1: Determination of strength
TS EN 13055 Lightweight aggregates
TS EN 196-10 Cement test methods - Part 10: Determination of water soluble chromium (vi) content of cement
TS EN 13719 Geosynthetics - Determination of long-term protection efficiency of geosynthetics in contact with geosynthetic sets
TSE K 518 LIFT CABINET
TS EN 16475-3: 2016 Chimneys - Accessories - Part 3: Draft regulators, stop opening devices and combined secondary air devices - Specifications and Test Methods
TS EN 14038-1 Electrochemical realkalization and chloride extraction processes for reinforced concrete - part 1: realkalization
TSE K 335 Plastic Chimney Terminal
TS EN 13230-5 Railway applications - Road - Concrete sleepers and supports - Part 5: Special elements
TS EN 13230-1 Railway applications - Railway - Concrete sleepers and supports - Part 1: General rules
TS EN 13230-2 Railway applications - Railway - Concrete sleepers and supports - Part 2: Prestressed monolithic sleepers
TS EN 13230-3 TS EN 13230-3: 2015 Railway applications - Road - Concrete sleepers and supports - Part 3: Reinforced twin sleepers
TS EN 13230-4 Railway applications - Road - Concrete sleepers and supports - Part 4: Pretension bearings for shears and cruisers
TS EN 50193-1 Electric instantaneous water heaters - Part 1: General rules
TS EN 12897 Water supply - Specification for indirectly heated unventilated (closed) water tanks
TS EN 12039 Flexible sheets for waterproofing - Bituminous sheets for waterproofing on roofs - Determination of adhesion to granules
TS EN 492 + A1 Fiber cement boards and fittings - Product specifications and test methods
TSE CEN / TR 16970 Sustainability of structures - Guidelines for the implementation of EN 15804
TS EN 14358 Wooden structures - Calculation of characteristic values and acceptance criteria
TS EN 16784 Wooden structures - Test methods - Determination of long-term behavior of coated and uncoated anchor type fasteners
TS EN 62052-31 Electrical measuring equipment (aa) - General rules, tests and test conditions - Part 31: Product safety guidelines and tests
TS EN 1015-12 Masonry mortar - Test methods - Part 12: Determination of adhesion strength of hardened plaster and masonry mortar to the substrate
TS EN 14019 Curtain walls - Impact resistance - Performance requirements
TS EN 13165 + A2 Thermal insulation products - For buildings - Rigid polyurethane foam (PU) fabricated products - Specifications
TS EN 13166 + A2 Thermal insulation products - For buildings - Fabricated phenolic foam (PF) - Specifications
TS EN 14527 Shower trays - for home and similar use
TS EN 12467 + A1 Flat sheets - Manufactured using fiber reinforced cement - Product properties and test methods
TS EN 14411 Ceramic tiles - Definitions, classification, specifications, conformity assessment and marking
TS EN 845-1 + A1 Masonry - Auxiliary components - Specifications - Part 1: Ties, straps, hangers and cantilever holders
TS EN 845-2 + A1 Masonry - Auxiliary Components - Specifications - Part 2: Lintels
TS EN 845-3 + A1 Masonry - Auxiliary Components - Specifications - Part 3: Wire mesh steel reinforcement for bearing joints
TS EN ISO 16170 Test methods for filter systems in case of very high efficiency for industrial plants
TSE CLC / TS 50612 Portable electrical devices for measuring flue gas combustion parameters - Guidance for commissioning, service and maintenance of gas-fired central heaters
TS HD 60364-6 Low voltage electrical installations - Part 6: Verification
TS EN 16361 + A1 Power-driven doors suitable for pedestrian passage - Product standard, performance characteristics - Ready-made doors suitable for pedestrian passage, except for crash type doors, which are primarily designed to be operated with power.
TS EN 13119 Curtain walls - Terms and recipes
TSE CEN / TS 16637-3 Construction products - Evaluation of the release of hazardous substances - Part 2: Horizontal gliding test
tst EN 1253-1 Sieves for buildings - Part 1: Floor drains with siphon seal against water at least 50 mm depth
tst EN 1253-2 Drains for buildings - Part 2: Floor drains and roof drains
TSE K 522 Filter Coatings for Surface Drainage Pipes
TSE K 518 / T1 LIFT CABINET
tkt Fire-resistant acoustic foam - Open-pore flexible polyurethane foam impregnated with fire-resistant inorganic mineral Fire-resistant acoustic foam - Open-pore flexible polyurethane foam impregnated with fire-resistant inorganic mineral
TS EN 13501-5: 2016 Construction products and building elements - Fire classification - Part 5: Classification using data obtained from the exposure of roofs to external fires
TS EN 1504-8 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Evaluation and verification of quality control and performance continuity (AVCP)
TS EN 14889-1 / D1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and compatibility
TSE K 525 LIFT STOPS AND CABIN DOORS
TSE K 34 / T1 Plastic roofing tiles and fittings
TS EN 15269-1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 1: General rules
TS EN 15269-3 Extended application of test results for fire resistance and / or smoke control for doors, shutters and openable window components, including elements of building equipment - Part 3: Fire resistance of hinged or revolving wooden door sets and openable wooden frame windows
TS EN 15269-7 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, blinds and openable window fittings (including building components) - Part 7: Fire resistance for steel sliding door sets
TS EN 15269-10 Comprehensive application of results from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 10: Fire resistance of steel roller shutter assemblies
TS EN 15269-20 Comprehensive application of the results obtained from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including structural elements) - Part 20: Hinged and studded glazed doors with steel, timber and metal frames
TS EN ISO 15858 UV-C Devices - Safety information - Allowed human exposure
tst EN 13374 Temporary edge protection systems - Product properties, test methods
TS EN 12602 Prefabricated reinforced concrete elements
TS EN 14351-1: 2006 + A2 Windows and doors - Product standard, performance characteristics - Part 1: Windows and ready-made exterior doors suitable for pedestrian passage
TS EN 13241: 2003 + A2 Doors - Used in industrial and commercial buildings and garages - Product standard, performance characteristics
TS EN ISO 10140-1 Acoustics - Laboratory measurement of sound insulation in building elements
TS EN ISO 12572 Performance of the materials and products used in buildings in relation to heat and humidity - Determination of water vapor transmission properties - Cup method
TS EN 16758 Façade - Determination of strength of joints exposed to shear - Test method and requirements
TS EN 1304 Roof tiles and fittings - Made of clay - recipes and features
tst EN 16153 + A1 Polycarbonate (PC) flat sheets - Transparent - Closed corrugated (with chamber) - Used in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
TS 13766 Waterproofing with sliding waterproofing materials - General requirements and application rules for basic and curtain insulations
TS EN 12608-1 Rigid polyvinylchloride (pvc-U) profiles - Used in fabrication of windows and doors - Classification, properties and test methods
TSE CEN / EN 12098-6 Controllers for heating systems - Part 6: TR prEN 12098-1: accompanying 2015 - Modules M3-5,6,7,8
TSE CEN / TR 12098-7 Controls for heating systems - Part 7: TR prEN 12098-3: accompanying 2015 - Modules M3-5,6,7,8
TSE CEN / EN 12098-8 Controls for heating systems - Part 8: EN prEN 12098-5: accompanying 2015 - Modules M3-5,6,7,8
tst EN 81-22 Safety rules for the construction and installation of elevators - Elevators for transport of persons and goods - Part 22: Electric elevators for inclined plane
TS EN 14037-4 Ceiling-mounted radiant panels supplied with water at a temperature lower than 120ºc - Part 4: Prefabricated ceiling-mounted radiant panels - Test method for cooling capacity
TS EN 14037-5 120 Ceiling-mounted radiation panels supplied with water below ° C Section 5: Open or closed heated ceiling surfaces - Test method for thermal output
TS EN 15269-5 + A1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 5: Glazed door sets with hinged and swiveling metal frames and opening windows fire resistance
TS EN 81-21 + A1 Elevators - For the transport of persons and cargo - Safety rules for construction and installation - Part 21: New elevators for the transport of people and goods / people in existing buildings
TS EN 81-82 Safety rules for construction and installation - Existing elevators - Part 82 - Improving accessibility to existing elevators including disabled
TS EN 13203-4 Hot water-generating gas appliances - Part 4: Assessment of the energy consumption of hot water and electricity generating gas combined heat and electrical devices (mCHP)
TS HD 60364-4-46 Low voltage electrical installation - Section 4-46: Protection for safety
TS HD 60364-5-537 Low voltage electrical installation - Part 5-537: Selection and installation of electrical equipment - Arrangements for protection, disconnection, switching, control and monitoring - Item 537: Disconnection and switching
TS EN 16382 Thermal insulation products for building applications - Determination of the tensile strength of plate anchors from thermal insulation products
TS EN 16383 Thermal insulation products for building applications - Determination of heat and moisture behavior of exterior plasters and exterior thermal insulation composite systems
TS EN 62305-1 / AC Lightning protection - Part 1: General rules
TS EN 62305-4 / AC Lightning protection - Part 4: Electrical and electronic systems in buildings
tkt 2016114159 Gypsum Board Systems Intervention Doors and Doors
TS EN 12608-1 Rigid polyvinylchloride (pvc-U) profiles - Used in fabrication of windows and doors - Classification, properties and test methods
TS 13736 Authorized Services - Elevator Drives - Rules
TS EN 413-2 Cement - Mortar cement - Part 2: Test methods
TS EN 196-3 Cement test methods - Part 3: Determination of setting times and expansion
TS EN 206: 2013 + A1 Concrete - Specification, performance, manufacturing and conformity
TS EN 998-2 Masonry mortar - Specifications - Part 2: Masonry mortar
TSE CEN / TR 16886 Guidance on the application of statistical methods to determine the properties of masonry units
TS EN 233 Wall coverings - Rolled - Properties of finished wallpapers, wall vinyls and plastic wall coverings
TS 13777 Composite panels - Polyethylene or mineral filled - Both sides covered with aluminum plate
TS EN ISO 11177 Glass and porcelain enamels - internal and external enamelled valves and pressure piping for untreated and drinking water lines - Quality requirements and testing
TS EN 13163: 2012 + A2 Thermal insulation products for buildings - Fabricated products of expanded polystyrene (EPS) - Specifications
TS EN 13075-1 Bitumen and bituminous binders - Determination of fracture behavior - Part 1: Determination of fracture value of cationic bitumen emulsions by mineral filler method
TS EN 13075-2 Bitumen and bituminous binders - Determination of fracture behavior - Part 2: Determination of the mixing time of cationic bitumen emulsions with fine mineral substances
TS EN 16849 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Dry balance method
TS EN 13587 Bitumen and bituminous binders - Determination of tensile properties of bituminous binders by tensile test method
TS HD 60364-5-53 Low voltage electrical installations - Part 5-53: Selection and installation of electrical equipment - Switchgear and controlgear
tkt 480 Magnesium oxide based building panels - Product properties and test methods
tst 2017114313 Floor coverings in workplaces and workplaces at risk of slipping - Basic requirements and tests
TS EN 12209 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
TS EN 1993-1-1 / NA Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 1993-1-1 / NA Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 539-2 Clay roof tiles for discontinuous roofing - Determination of physical characteristics - Part 2: Frost resistance test
tst EN 14527 Shower trays - for home and similar use
tst EN 1604 Thermal insulation materials for buildings - Determination of dimensional stability under certain temperature and humidity conditions
tst EN 1304 Roof tiles and fittings - Made of clay - recipes and features
prEN 81-77 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 77: Elevators subject to seismic conditions
prEN 81-77 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 77: Elevators subject to seismic conditions
tst EN 772-1: 2011 + A1 Masonry units - Test methods - Part 1: Determination of compressive strength
TS EN 13381-5 Test methods for the determination of the contribution of structural elements to fire resistance - Part 5: Protection applied to concrete / profiled steel sheet composite element
TSE K 412 Plastic jacket anchors - Used for fixing exterior thermal insulation
TSE K 127 Thermal paints
tst 2810-2 Sealing seals used as waterstops in joints in concrete structures - Elastomer- Part 2: Material properties and tests
TS EN 1365-1 / AC Fire resistance tests - For load-bearing elements - Part 1: Walls
TS EN 998-1 Masonry mortar - Specifications - Part 1: Rough and fine plaster mortar
TS 1905 / T1 Prefabricated wooden doors
tst EN 539-2 Clay roof tiles for discontinuous roofing - Determination of physical characteristics - Part 2: Frost resistance test
TS EN 62056-4-7 Electrical measurement data exchange - DLMS / COSEM package - Part 4-7: DLMS / COSEM transfer layer for IP networks
TS EN 62056-5-3 Electrical measurement data exchange - DLMS / COSEM package - Part 5-3: DLMS / COSEM application layer
TS EN 62056-6-1 Electrical measurement data exchange - DLMS / COSEM package - Part 6-1: Object Identification System (OBIS)
TS EN 62056-6-2 Electrical measurement data exchange - DLMS / COSEM package - Part 6-2: COSEM interface classes
TS EN 62056-7-5 Electrical measurement data exchange - DLMS / COSEM package - Part 7-5: Local data transfer profiles (LN) for Local Area Networks
TS EN 16809-2 Thermal insulation products for buildings - In situ formed from loose filled expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Requirements for bonded and loose filled articles after installation
TS EN ISO 10545-13 Ceramic tiles - Part 13: Determination of resistance to chemicals
TS EN 490 + A1 Concrete roofing tiles and fittings for roofing and wall covering - Product features
TSE CEN / TR 17024 Natural stones - a guide to the use of natural stones
TSE CLC / TR 50670 External fire exposure to roofs with photovoltaic (PV) arrays - Test method (s)
TS EN 50193-2-2 Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point electric instantaneous heaters - Efficiency
TS EN 1453-1 Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 1 - Pipes and system features
TS EN 12207 Windows and doors - Air permeability - Classification
TSE CEN / TS 12390-9 Concrete - Hardened concrete tests - Part 9: Freeze-thaw resistance with de-icing salts - Scaling
tst 2017114833 Anti-bacterial Plumbing fixtures and accessories
TSE CEN / EN 17052 EN 1090-1: Guidelines for the application of 2009 + A1: Applications of steel structures and aluminum structures - Part 2011: Requirements for conformity assessment of structural components
tst 2017114867 (TSE K 379) Bathroom Accessories
tst 2017114868 (TSE K 506) Metal constructions for terrestrial solar power plants - Structural design, production, inspection and testing methods
tst 2017114870 (TSE K 274) Precast concrete sleeper - for low voltage, medium voltage and high voltage lines - Definitions, requirements and test methods
TSE CEN / TR 16940 Domestic gas installations - Safety recommendations
tst 2017114849 Duct Type Shelter Ventilation Device
TS EN 15129 Anti - Seismic devices
TS EN 15102: 2007 + A1 Decorative wallpapers in rolls and panels
TS 13307 Tartan surfaces applied in sports fields
TS EN 13053 + A1 Ventilation of buildings-Air transport units-Performance and proportions of units, components and parts
TS EN 15502-2-1 + A1 Gas-fired central heating boilers - Part 2-1: Specific standards for Type C devices and devices of the type B1.000, B2 and B3 not exceeding 5 kW of nominal heat input
TS EN ISO 16890-1 Air filters for general ventilation - Part 1: technical specifications, requirements and classification system based on particulate matter efficiency (ePM) (ISO 16890-1: 2016)
TS EN ISO 16890-2 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2: 2016)
TS EN ISO 16890-3 Air filters for general ventilation - Part 3: Determination of gravimetric efficiency and airflow resistance to the mass of captured test dust (ISO 16890-3: 2016)
TS EN ISO 16890-4 Air filters for general ventilation - Part 4: Conditioning method for determining minimum fractional test efficiency (ISO 16890-4: 2016)
TS EN 1993-1-1 / D1 Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
TS EN 1993-1-1 / D1 Design of steel structures - Part 1-1: General rules and rules applicable to buildings (Eurocode 3)
tst EN 12467 + A1 Flat plates - Manufactured using fiber-reinforced cement - Product properties and test methods
TSE K 542 Ventilation components - Buildings - End elements - Grids, diffusers (anemostads), shutters - Features and tests
TS EN ISO 2603 Simultaneous interpretation - Permanent cabins - Requirements
TS EN ISO 4043 Simultaneous translation - Mobile cabins - Requirements
TS EN ISO 20109 Simultaneous translation - hardware_ requirements
TS EN 81-20 / D2 Elevators - Safety regulations for construction and installation - Elevators for human and freight transport - Part 20: Elevators for people and goods
tst 2017116141 Transport Principles of Bulk Cement
TS EN 1993-1-4 / NA Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-4 / NA Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-5 / NA Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect
TS EN 1993-1-5 / NA Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar plate structures without lateral load effect
TS EN 1993-1-8 / NA Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints
TS EN 1993-1-8 / NA Eurocode 3: Design of steel structures - Part 1-8: General rules - Design of joints
TS EN 196-3 Cement test methods - Part 3: Determination of setting times and expansion
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 846-9 Masonry - Auxiliary components - Test methods - Part 9: Determination of flexural strength and shear strength of lentons
TS EN 998-1 Masonry mortar - Specifications - Part 1: Rough and fine plaster mortar
TS EN 998-2 Masonry mortar - Specifications - Part 2: Masonry mortar
TS EN 845-2 + A1 Masonry - Auxiliary Components - Specifications - Part 2: Lintels
TS EN 1015-12 Masonry mortar - Test methods - Part 12: Determination of adhesion strength of hardened plaster and masonry mortar to the substrate
TS EN 12602 Prefabricated reinforced concrete elements
TS 13687 / tst T1 Cement based plaster - for thermal insulation board
TSE K 540 Ventilation units - In buildings - Cell - Aspirators - Ventilators - Specifications and Tests
TSE K 541 Ventilation - air dampers in buildings
TSE K 543 Metal flange profiles - Used in air ducts - Features and tests
TSE K 538 Ventilation - Mufflers used in air ducts in buildings - Features and tests
TSE K 536 Ventilation units - Metallic and synthetic filters used in buildings - Features and tests
TSE K 537 Control covers - Used in air ducts - Features and tests
TS HD 60364-6 / A11 Low-voltage electrical installations-Part 6: Verification
TSE K 539 Thermal insulation pipes and blocks made of expanded perlite
TS EN 62052-21 / A1 Electrical measuring equipment (AC) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
TS EN 62053-24 / A1 Electrical measuring equipment (aa) - Specific requirements - Part 24: Static meters for measuring reactive energy at the basic frequency - (class 0,5 S, class 1 S and class 1)
TS EN 62054-11 / A1 Electric meter (aa) - Tariff and load control - Part 11: Particular requirements for electronic wavelet control receivers
TS EN 12004-1 Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of performance continuity, classification and marking
TS EN 12004-2 Adhesives for ceramic tiles - Part 1: Test methods
TS EN 12004-2 Adhesives for ceramic tiles - Part 1: Test methods
TS EN 14891 Waterproof products for use under ceramic tiles bonded with adhesives - Requirements, test methods, evaluation and verification of performance continuity, classification and marking
TS EN 14891 Waterproof products for use under ceramic tiles bonded with adhesives - Requirements, test methods, evaluation and verification of performance continuity, classification and marking
TS EN 14891 Waterproof products for use under ceramic tiles bonded with adhesives - Requirements, test methods, evaluation and verification of performance continuity, classification and marking
TS EN 12039 / AC Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion to granules
TS EN 13653 Flexible sheets for waterproofing - For waterproofing on concrete bridge decks and other concrete surfaces open to traffic - Determination of shear strength
TS EN 14223 Flexible sheets for waterproofing - For waterproofing on concrete bridge decks and other concrete surfaces open to traffic - Determination of water absorption
TS EN 14691 Flexible sheets for waterproofing - For waterproofing of concrete bridge decks and other concrete surfaces open to vehicle traffic - Compatibility through heat treatment
TS EN 14692 Flexible sheets for waterproofing - For waterproofing of concrete bridge decks and other concrete surfaces open to traffic - Determination of resistance to compaction of asphalt layer
TS EN 14694 Flexible sheets for waterproofing - For waterproofing of concrete bridge decks and other concrete surfaces open to traffic - Determination of resistance to dynamic water pressure after damage caused by pretreatment
TS EN ISO 15876-1 Plastic pipe systems -Used in hot and cold water systems-Polybutylene (pb) -Chapter 1: General
TS EN ISO 15876-2 Plastic pipe systems -Used in hot and cold water systems-Polybutylene (pb) -Chapter 2: Pipes
TS EN 16908 Cement and building lime - Environmental product declarations - Product category to complement EN 15804
TS EN 16908 Cement and building lime - Environmental product declarations - Product category to complement EN 15804
TS EN ISO 15876-5 Plastic pipe systems - Used in hot and cold water systems - Polybutylene (pb) - Part 5: suitability of the system for its purpose
TSE CEN / TR 17068 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Guidelines for CE marking and Declaration of Performance (DoP)
TS EN 772-5 / AC Masonry units - Test methods - Part 5: Determination of active soluble salt content of clay masonry units
TSE CEN / TS 1453-2 Plastic pipe systems - Profiled walls - Used for disposal of indoor wastewater (at high and low temperatures) - Made of polyvinyl chloride (pvc-U) without plasticizer - Part 2 - Conformity assessment guide
TS EN 1052-2 / AC Masonry test methods - Part 2: Determination of flexural strength
TS EN 15651-5 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 5: Evaluation and verification of performance continuity, marking and labeling
TS EN 15651-4 Joint sealants - For non-structural use in joints in buildings and pedestrian paths - Part 4: Joint sealants used in floor joints of pedestrian paths
TS EN 15651-3 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 3: Joint sealants used in wet spaces of buildings
TS EN 15651-2 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 2: Joint sealants used in glass parts of buildings
TS EN 15651-1 Joint sealants - For non-structural use in joints in buildings and pedestrian roads - Part 1: Joint sealants used in exterior facades of buildings
TS EN 1766 Concrete structures - Products and systems for protection and repair - Test methods - Reference concretes to be used in tests
TS EN 16475-2 Chimneys - Accessories - Part 2: Requirements and test methods
TS EN 16497-2 Chimneys - Concrete System Chimneys - Part 2: Balanced smoke path applications
TS EN 16573 Ventilation for buildings - Performance testing of components of residential buildings - Multifunctional balanced ventilation units for single-family dwellings, including heat pumps
TS EN 16830 Safety and control devices for gas and liquid fuel burners and appliances - Control functions in electronic systems - Temperature control function
TS EN 1090-5 Steel structure and aluminum construction applications - Part 5: Cold formed structural aluminum elements and technical requirements for roof, ceiling, floor and wall applications
TS EN 1090-5 Steel structure and aluminum construction applications - Part 5: Cold formed structural aluminum elements and technical requirements for roof, ceiling, floor and wall applications
TS 13709 / T1 Lightning protection - lightning rods
TS 12706 Business - Rules for landscaping
tst 12255 / T1 Authorized services - Elevator Maintenance Services - Rules
TS 13779 Hardened concrete - Standard practice for petrographic inspection - Inspection under polarized microscope
TS EN 12050-1 Wastewater lifting plants for buildings and settlements - Part 1: Wastewater lifting plants for faeces
TSE K 545 Electromagnetic wave absorbing units - made of aerated concrete
TSE K 97 / Revision Thermal insulation products - Used in buildings - Non-woven geotextile polyester felt products
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 206: 2013 + A1 Concrete - Specification, performance, manufacturing and conformity
TS EN 13830 Façade - Product standard
TS EN 14351-1: 2006 + A2 Windows and doors - Product standard, performance characteristics - Part 1: Windows and ready-made exterior doors suitable for pedestrian passage
TS EN 12467 + A1 Flat sheets - Manufactured using fiber reinforced cement - Product properties and test methods
TS EN 13499 / D1 Thermal insulation materials for buildings - Expanded polystyrene based composite thermal insulation systems (etics) - Specifications
tst 6356 Natural gas meters - Two connection connection heads
TSE CEN / EN 15193-2: 2017 Energy performance in buildings - Energy requirements for lighting - Part 2: EN 15193-1 Module M9
TSE CEN / EN 15193-2: 2017 Energy performance in buildings - Energy requirements for lighting - Part 2: EN 15193-1 Module M9
TSE CEN / EN 15193-2: 2017 Energy performance in buildings - Energy requirements for lighting - Part 2: EN 15193-1 Module M9
TS 7363 Natural gas - Building indoor installation design and application rules
tkt 2017118999 STEEL FIBER CONCRETE FLOATING SCAFFOLDERS
TS EN 15193-1 Energy performance in buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
TS EN 15193-1 Energy performance in buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
TS EN 15193-1 Energy performance in buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
TS EN 1359 Gas meters with diaphragm
TS 13438 Authorized services - For machines used in the manufacture of bricks and tiles - Rules
TS EN 15316-2-1 Heating systems for buildings-Method for calculating system efficiency and energy requirements-Part 2: Space heating emission systems
TSE K 462 PROJECTOR POLES- Lift, Protection Ladder, Portable Ladder, Platform (Protection Basket), Crossed System Projector Poles
TSE K 10 Acrylic dispersion based, adherence and impermeability additive for plaster and screed
TS ISO 6512 Modular coordination floor heights and volume heights for housing
tst 407 Asmolen - Lightweight aggregate concrete block
TS 21 / Tadil G Çimento - White portland cement - Composition, properties and conformity criteria
tst 39 Paints-Organic solvent-based-Topcoat 180
TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals
TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals
TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals
TSE K 49 Expanded polystyrene sheet insulated panel covered with steel mats connected by cross-diagonals
TS EN 74-3 Scaffolding - Joining elements, pin guides and base plates - Part 3: Flat base plates and pin guides - Requirements and test procedures
TS EN 74-1 Scaffoldings - Pipe and jointing elements - Jointing elements, loose-fit guides and base plates - Specifications and test operations
TS EN 74-2 Formwork and scaffolding - Joining elements, pin guides and base plates - Part 2: Special joining elements - Requirements and test procedures
TSE K 79 Modular building systems - Modular metal cabinets that can be installed and removed on site
TSE K 79 Modular building systems - Modular metal cabinets that can be installed and removed on site
TS EN 80 Suspended urinals - Connection dimensions
TS EN 81-43 Elevators - Safety regulations for construction and installation - Specific applications for passenger and freight elevators - Part 43: Elevators for cranes
TSE CEN / EN 81-10 Elevators - Safety rules for construction and installation - Basics and comments - Part 10: Systematic of most 81 series standards
TS EN 81-71 + A1 Elevators - Safety regulations for construction and installation - Special applications for passenger and freight elevators - Part 71: Intentional damage-resistant elevators
TSE CEN / TS 81-11: 2011 Elevators - Safety rules for construction and installation - Basics and comments - Part 11: Comments on most 81 family standards
TS EN 15819: 2011 Polymer modified bituminous thick covers for waterproofing - Fully dried layer thickness reduced
TSE K 97 Thermal insulation products - Used in buildings - Non-woven geotextile felt products
TS EN 200 Sanitary fittings - Faucets and taps for type 1 and type 2 water supply systems - General specifications
TS 102 EN 512 Fiber cement - pressure pipes and fittings
TS 102 EN 512 / tst T Fiber cement - pressure pipes and fittings
TS 113 Roofing - Bitumen emulsions used as protective coatings - Specifications
TS 113 Roofing - Bitumen emulsions used as protective coatings - Specifications
TS EN 115-2: 2010 Safety for escalators and escalators - Part 2: Rules for improving the safety of existing escalators and escalators TS 132 Roof coatings - Bitumen emulsions used as protective coatings - Test methods
TS 132 Roofing - Bitumen emulsions used as protective coatings - Test methods
TS EN ISO 140-18 Acoustics - Measurement of sound insulation in buildings and building elements - Part 16: Measurement of rain noise on building elements in the laboratory
TS EN 15643-2: 2011 Sustainability of construction works - Inspection of buildings - Part 2: Principles for inspection of environmental performance
TS EN 179 Building equipment - Emergency exit devices operated by a lever or push plate - Rules and test methods
TS HD 193 S2 Electrical installation in buildings - Voltage bands
TS EN 196-5 Cement test methods - Part 5: Pozzolanic property test in pozzolanic cements
TS EN 196-8 Cement test methods - Part 8: Heat of hydration - Solution method
TS EN 196-9 Cement test methods - Part 9: Heat of hydration - Semi-adiabatic method
TSE CEN / TR 196-4 Cement test methods - Part 4: Determination of component content
TSE CEN / TR 196-4 Cement test methods - Part 4: Determination of component content
TS EN 197-2 Cement- Part 2: Conformity assessment
TS EN 198 Sanitaryware - Bathtubs - Cross-linked cast acrylic sheets - Specifications and test methods
TS 202 Ceramic tiles - Tiles
TS 202 / Tadil G Ceramic Tiles - Tile
TS EN 206-1 / tst T Concrete - Part 1: Feature, performance, manufacturing
TS 213-1 EN 13748-1 / T1 Terrazo tiles - For indoor use
tst 213-2 EN 13748-2 / T2 Terrazo tiles - for outdoor use
TS EN 215 / T1 Radiator valves - Thermostatic - Features and test methods
tkt 200978363 Chemical anchors
tst EN 248 Sanitary fittings - Electrolytic chromium-Nickel platings-General technical specifications
TS EN 249 Sanitaryware - Shower trays - Cross-linked cast acrylic sheet - Requirements and test methods
TS EN 263 Sanitary ware - Cross-linked cast acrylic sheets for bath tubs and shower trays for domestic use
TS EN 274-1 Waste fittings for sanitary installations - Part 1: Specifications
TS EN 274-3 Waste fittings for sanitary installations - Part 3: Quality control
TS 274-2 EN 1452-2 / tst T Plastic piping systems for drinking and potable water - Part of polyvinyl chloride (pvc-U) without plasticizer 2: Pipes
TS 274-3 EN 1452-3 / tst T Plastic piping systems for drinking and potable water - Non-plasticizing polyvinyl chloride (pvc-U) - Part 3: Fittings
TS EN 303-6 Boilers - Part 6: Forced hammer brol - Key features for the domestic hot water operation of combined boilers with atomized liquid fuel burner not exceeding the rated thermal input 70 kw
TS EN 303-1 / A1 Boilers boilers with forced draft burner - Part 1: Terms and definitions general features experiments and marking
TS EN 303-2 / A1 Boilers - Part 2: Boilers with forced draft burners - Special requirements for boilers with spray fuel burners
TS EN 304 / A1 Boilers - Test rules for liquid fuel injection burners
TS EN 304 / A2 Boilers - Test rules for liquid fuel injection burners
TS 306 Asphalt used in foundations and vertical surfaces, moisture and waterproofing
TS EN ISO 354 Acoustics - Measurement of sound absorption in the ringing room
TS 366 Hela washers-Pressure
TS 366 / T1 Hela washers-Pressure
TS 366 / T2 Hela washers-Pressure
TS 366 / T3 Pressure washer (basses)
TS EN 380 Timber - Test methods - General principles for static loading tests
TS EN 383 Wooden structures - Test methods - Determination of burying strength and defermation values for anchor type fasteners
TS HD 384.7.711 Building electrical installations - Part 7: Requirements for special installations and locations - Part 711
TS HD 384.4.45 S1 Electrical installation in buildings section 4: Safety group 45- Protection against voltage drop
TS HD 384.7.753 S1 Building electrical installations - Part 7: Requirements for special installations and locations - Part 753: Floor and ceiling heating systems
TS HD 384.7.753 S1 Building electrical installations - Part 7: Requirements for special installations and locations - Part 753: Floor and ceiling heating systems
tst HD 384.4.46 S2 Electrical installation in buildings - Part 4: Protection group for safety 46: Isolation and switching
tst HD 384.6.61 S2 Electrical installation in buildings section 6: Verification group 61: Initial verification
TS HD 384.4.482.S1 Electrical installation in buildings - Part 4: Safety protection - Group 48: Selection of protective measures due to external influences - Part 482: Protection against fire at special risks or hazards
TS HD 384.4.473 S1 Electrical installation in buildings - Part 4: Safety protection - Group 47: Application of protection measures - Part 473: Overcurrent protection
TS EN 409 Timber - Test methods - Determination of bending moment of anchor type fasteners
TS EN 413-1: 2011 Mortar cement - Part 1: Composition, properties and conformity criteria
TS 415 EN 12939 Thermal performance of building materials and products-Determination of thermal resistance by enclosed hot plate device and heat flow meter methods-High and medium heat resistant thick products
TS EN 446 Sherbet - For prestressed reinforcement - Sherbet processing
TS EN 447 Sherbet - For prestressed reinforcement - Basic requirements
TS EN 450-2 Fly ash - Used in concrete - Part 2: Conformity assessment
TS EN 451-2 Fly ash - Test method - Part 2: Determination of fineness by wet sieving
TS EN 451-1 Fly ash - Test method - part 1: Determination of free calcium oxide content
TS 455 / T1 Gas meters (with bellows)
TS 459 Hatches used in drinking water network
TS EN 459-2 Building lime - Part 2: Test methods
S EN 459-2 Building lime - Part 2: Test methods
TS 459 Hatches used in drinking water network
TS EN 477 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of impact strength in main profiles - Mass reduction method
TS EN 478 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors, appearance after exposure to 150 c - Test method
TS EN 479 Non-plasticizing polyvinyl chloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of permanent thermal elongation
TS EN 480-14 Chemical additives - For concrete, mortar and grout - Test methods - part 14: Determination of the effect of the additive on the susceptibility of reinforcing steel to corrosion - Potentiostatic electrochemical test
TS EN 480-2 Chemical additives for concrete, mortar and grout-Test methods-Part 2: Determination of setting time
TS EN 480-6 Chemical additives - For concrete, mortar and grout - Test methods - part 6: Infrared analysis
TS EN 480-6 Chemical additives - For concrete, mortar and grout - Test methods - part 6: Infrared analysis
TS EN 480-11 Chemical additives - For concrete, mortar and grout - Test methods - part 11: Determination of air gap properties in hardened concrete
TS EN 480-4 Chemical additives - For concrete, mortar and grout - Test methods - part 4: Determination of amount of perspiration in concrete
TS EN 495-5 Flexible sheets - For waterproofing - Plastic and rubber sheets for roof waterproofing - Part 5: Determination of low temperature foldability
TS 496 Principles of natural ventilation of windows and bathrooms with chimneys
TS 498 Calculation values of loads to be taken in dimensioning of structural elements
TS 500 Design and construction rules of reinforced concrete structures
TS 500 / T1 Design and construction rules of reinforced concrete structures
tst EN 500-1 + A1 Mobile road construction machinery-Safety rules-Part 1-General rules
TS EN 506 Roofing sheets - Metal - Self-supporting - Made of copper or zinc - Specifications
TS EN 507 Roofing Sheets-Metal Fitting-Aluminum Plate-Features
TS EN 508-2 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 2: Aluminum
TS EN 508-3 Roofing sheets - Metal - Self-supporting - Made of steel, aluminum or stainless steel - Specifications - Part 3: Stainless steel
TS EN 516 Auxiliary equipment for roofs - Roof transport facilities - Walkways, wide and narrow steps
TS EN 520 + A1 Gypsum boards - Definitions, requirements and test methods
TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control
TS EN 524-3 Steel strip sheaths - Test methods for prestressed reinforcement - Part 3: Forward-backward bending test
TS EN 524-4 Steel strip sheaths - Test methods for prestressed reinforcement part 4: Determination of resistance to lateral load
TS EN 524-6 Steel strip sheaths - Test methods for prestressed reinforcement - Part 6: Water tightness determination (water loss determination)
TS EN 534 + A1 Bituminous sheets - Corrugated - Product properties and test methods
TS 537 Cemented adobe blocks - For walls
TS 537 Cemented adobe blocks - For walls
TS 537 / tst T Cemented adobe blocks - For walls
TS 537 / tst T Cemented adobe blocks - For walls
TS 538 Fastening door leaves
TS 538 / T1 Fastening door leaves
TS 538 / tst T Fastening door leaves
TS 539 Wooden door panels, with panel (mirror), glass, panel and glass
TS 539 / T1 Wooden door leaves - with panel (mirror), glass, panel and glass
TS EN 539-1 Roofing tiles - Made of clay - For discontinuous roofing - Determination of physical properties - Part 1: Water impermeability test
TS 539 / tst T Wooden door panel, with panel, mirror, panel, panel and panel
TS 543 Calculation and construction rules of brick slabs
TS 579 / T1 Valves and fittings (for radiators)
TS 579 / T2 Valves and fittings - Modified 2 used in heating systems
TS 579 / T3 Valves and fittings - used in heating systems
TS 583 Faucets (for compressed air)
TS EN 588-2 Pipes - Made of fibrous cement - For drainage and sewage - Part 2: Inspection manholes and inspection chambers
TS EN 588-2 Pipes - Made of fibrous cement - For drainage and sewage - Part 2: Inspection manholes and inspection chambers
TS EN 595 Timber - Test methods - Determination of strength and deformation movements of trusses
TS EN 595 Timber - Test methods - Determination of strength and deformation movements of trusses
TS EN 596 Timber - Test methods - Impact impact test with a soft mass on wood-framed panels
tst 605 Washbasins (ceramic or cast iron)
TS EN 641 Reinforced concrete pipes - Pressure - Steel jacketed type - Joints and joint special parts
TS 647 Calculation and construction rules of wooden structures
TS 648 Calculation and construction rules of steel structures
TS EN 674: 2011 Glass-Thermal conductivity (u value) determination-Enclosed hot plate method
TS 675 Pressed wooden door leaves
TS 675 / T1 Pressed wooden door leaves
TS 675 / T2 Pressed wooden door leaves
TS 675 / T3 Pressed wooden door leaves
TS 675 / tst T Pressed wooden door leaves
TS EN 679 Gas concrete - Determination of compressive strength
TS EN 680 Determination of gas concrete-drying shrinkage
TS EN 15316-1 Heating systems for buildings-Method of calculating system efficiency and energy requirements-Part 1: General
TS 699 Natural building blocks - Examination and laboratory test methods
TS 699 Natural building blocks - Examination and laboratory test methods
TS ISO 727-2 Straight pipe head fittings for pressure pipes - Made of polyvinylchloride (pvc-U), chlorinated polyvinylchloride (pvc) or acrylonitrile / butadiene / styrene (abs) without plasticizer - Part sockets - Part 1: Metric series
TS ISO 727-1 Straight pipe head fittings for pressure pipes - Made of polyvinylchloride (pvc-U), chlorinated polyvinylchloride (pvc) or acrylonitrile / butadiene / styrene (abs) without plasticizer - Flat sockets - Part 2: Inch based series
TS 733 Thermosyphons - Solid fuel burning
TS 734 Definitions of classification and dimensioning of building and space elements
TS 737 Water filters (sand filters)
TS EN 772-2 Masonry units - Test methods - Part 2: Determination of the percentage of void area of the concrete masonry units (by means of paper extraction)
TS EN 772-7 Masonry units - Test methods - Part 7: Determination of water absorption by water boiling method in clay masonry waterproofing layer units
TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units
TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units
TS EN 772-10 Masonry units - Test methods - Part 10: Determination of moisture content in lime sandstone and aerated concrete units
TS EN 772-19 Masonry units - Test methods - Part 19: Determination of moisture expansion of large masonry units with horizontal holes
TS EN 772-20 Masonry units - Test methods - Part 20: Determination of surface smoothness of masonry units made of aggregate, sand stone and natural stone
TS EN 772-20 Masonry units - Test methods - Part 20: Determination of surface smoothness of masonry units made of aggregate, sand stone and natural stone
TS EN 772-11: 2011 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
TS EN 772-11: 2011 Masonry units - Test methods - Part 11: Capillary water absorption in masonry units made of concrete, artificial and natural stone and determination of initial water absorption rate in clay masonry units
772: 18: Masonry units - Test methods - Part 2011: Determination of freeze-thaw resistance of silica sandstone masonry units
TS EN 772-6 Masonry units - Test methods - Part 6: Determination of tensile strength of bending of concrete masonry units
TS EN 772-2 / A1 Masonry units - Test methods - Part 2: Determination of the percentage of the space area of the masonry units (by the method of paper tracing)
TS EN 772-20 / A1 Masonry units - Test methods - Part 20: Determination of surface smoothness in masonry units
TS EN 772-20 / A1 Masonry units - Test methods - Part 20: Determination of surface smoothness in masonry units
TS 786 IEC 60145 Meters - Var-Hour meter (reactive energy meters)
TS 806 Wooden door frames
TS 806 / T1 Wooden door frames
TS 806 / tst T Wooden door frames
TS EN 815 + A2 Unshielded tunnel drilling machines and non-root well drilling machines for rocks - Safety regulations
TS EN 816 Sanitary fittings faucets and mixers-Automatic closing-Pn 10
TS EN 846-2 Masonry - Auxiliary components - Test methods - Part 2: Determination of bond strength of pre-made horizontal joint reinforcement used in mortar joints
TS EN 846-2 Masonry - Auxiliary components - Test methods - Part 2: Determination of bond strength of pre-made horizontal joint reinforcement used in mortar joints
TS EN 846-8 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 846-8 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 846-11 Masonry - Auxiliary components - Test methods - Part 11: Determination of the deviation of size and shape of lintels
TS EN 846-11 Masonry - Auxiliary components - Test methods - Part 11: Determination of the deviation of size and shape of lintels
TS EN 846-4 / A1 Masonry-Auxiliary components-Test methods section 4: Determination of load-city characteristics and load capacities of the tapes
TS EN 846-13 Masonry - Auxiliary components - Test methods - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
TS EN 846-8 / A1 Masonry - Auxiliary components - Test methods - Part 8: Determination of load capacity and load-displacement properties of beam hangers
TS EN 858-1 Separation systems for light liquids (eg oil and petroleum) - Part 1: Product design principles, performance and testing, marking and quality control
TS 901-2 Fiber sound insulation materials - used in buildings
TS EN 912 Wood binders - Properties of wood binders
TS EN 1996-3 / AC Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures
TS EN 1996-3 / AC Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures
TS EN 932-6 Tests for general properties of aggregates - Part 6: Recipes for repeatability and adaptability
TS EN 933-5 Tests for geometric properties of aggregates - Part 5: Determination of the percentage of crushed and crushed surfaces in coarse aggregates
TS EN 933-5 / A1 Tests for the geometric properties of aggregates - Part 5: Determination of the percentage of crushed and broken surfaces in coarse aggregates
TS EN 933-10 Tests for geometric properties of aggregates - Part 10: Determination of fine material - Classification of fine filling materials by particle size (air jet sieving)
TS EN 933-11 / AC Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components
TS EN 933-4 Tests for geometric properties of aggregates - Part 1: Determination of grain shape - Index of shape
TS EN 933-11 Tests for geometric properties of aggregates - Part 11: Classification tests for recovered coarse aggregate components
TS EN 934-6 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 934-6 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 934-4 Chemical additives - For concrete, mortar and grout - Part 4: Chemical additives used in grout for prestressing tendons - Definitions, requirements, conformity, marking and labeling
TS EN 934-6 / A1 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 934-6 / A1 Chemical additives for concrete, mortar and grout - Part 6: Sampling, conformity check and conformity assessment
TS EN 934-5 Chemical additives for concrete, mortar and grout - Part 5: Sprayed concrete admixtures - Definitions and characteristics, conformity, marking and labeling
TS EN 948 Hinged and revolving doors - Determination of static torsional resistance
TS EN 950 Door leaves - Determination of resistance to hard object impact
TS EN 952 Door leaves - General and regional flatness - Measurement method
TS EN 989 Determination of the adherence behavior of aerated concrete reinforcement bars by stripping test
TS EN 990 Aerated concrete and lightweight porous concrete - Verification of corrosion protection of reinforcement - Test methods
TS EN 992 Lightweight aggregate porous concrete - Determination of dry density
TS EN 992 Lightweight aggregate porous concrete - Determination of dry density
TS EN 1004 Mobile access and work towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance characteristics
TS ISO 1006 Building construction-Modular structures-Basic structure
TS EN 1008 Concrete - Mixed water - Sampling, testing and determination of the suitability of water as concrete mixed water, including water recovered from processes in the concrete industry
TS EN 1015-1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis)
TS EN 1015-3 Masonry mortar- Test methods- Part 3: Determination of fresh mortar consistency (with spreading table)
TS EN 1015-4 Masonry mortar - Test methods - Part 4: Determination of fresh mortar consistency (using dip tip)
TS EN 1015-7 Masonry mortar - Test methods - Part 7: Determination of air content of fresh mortar
TS EN 1015-10 Masonry mortar - Test methods - Part 10: Determination of the dry bulk volume volume of the hardened mortar
TS EN 1015-17 Masonry mortar - Test methods - Part 17: Determination of water-soluble chloride content in fresh mortars
TS EN 1015-3 / A1 Masonry mortar - Test methods - Part 3: Determination of fresh mortar consistency (with spreading table)
TS EN 1015-11 / A1 Masonry mortar - Test methods - Part 11: Determination of compressive and flexural strength of hardened mortar
TS EN 1015-2 / A1 Masonry mortar - Test methods - Part 2: For sampling and testing mortar stacks used in manufacturing
TS EN 1015-3 / A2 Masonry mortar - Test methods - Part 3: Determination of fresh mortar consistency (with spreading table)
TS EN 1015-6 / A1 Masonry mortar - Test methods - Part 6: Determination of hollow unit volume mass of fresh mortar
TS EN 1015-10 / A1 Masonry mortar - Test methods - Part 10: Determination of the hollow dry unit volume of hardened mortar
TS EN 1015-9 / A1 Masonry mortar - Test methods - Part 9: Determination of the processing and correction time of fresh mortar
TS EN 1015-17 / A1 Masonry mortar - Test methods - Part 17: Determination of water-soluble chloride content in fresh mortars
TS EN 1015-1 / A1 Masonry mortar - Test methods - Part 1: Determination of particle size distribution (via sieve analysis)
TS EN 1024 / T1 Roofing tiles - Made of clay - Determination of non-continuous geometric properties
TS EN 1024 / T1 Roofing tiles - Made of clay - Determination of non-continuous geometric properties
TS 2962-1 EN 1051-1 Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features
TS 2962-1 EN 1051-1 / T1 (Number modification, TS EN 1051-1) Glass - Used in structures - Glass bricks (blocks) and parquets - Part 1: Definitions and features
TS EN 1052-1 Masonry - Test methods - Section 1: Determination of compressive strength
TS EN 1052-4 Masonry-Test methods-Part 4: Determination of shear strength in joints with waterproofing layer
TS EN 1052-3 Masonry - Test methods - Part 3: Determination of initial shear strength
TS EN 1052-3 / A1 Masonry - Test methods - Part 3: Determination of initial shear strength
TS EN 1052-5 Masonry - Test methods - Part 5: Determination of bond strength by rotational forcing method
TS EN 1097-3 Tests for physical and mechanical properties of aggregates part 3: Determination of loose bulk density and void volume
TS EN 1097-2 Tests for mechanical and physical properties of aggregates part 2: Methods for determination of fragmentation resistance
TS EN 1097-8 Tests for mechanical and physical properties of aggregates - Part 8: Determination of stone polishing value
TS EN 1097-5 Tests for mechanical and physical properties of aggregates - Part 5: Determination of water content by drying in air circulation oven
TS EN 1097-1: Tests for mechanical and physical properties of aggregates - Part 2011: Determination of abrasion resistance (micro-deval)
TS EN 1097-4 Tests for mechanical and physical properties of aggregates - Part 4: Determination of cavities of dry compacted filler material
TS EN 1108 Waterproofing covers-Bitumen covers for roof waterproofing-Determination of the ability to maintain its shape under the influence of temperature cycling
TS EN 1110: 2010 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of yield strength at high temperatures
TS EN 1111 Sanitary fittings - Thermostatic mixers (pn 10) - general technical specifications
TS 1120 Rules for the installation of gas and electricity meters
TS 1120 Rules for the installation of gas and electricity meters
TS EN 1121 Doors - Behavior between two different environments - Test method
TS EN 1148 Heat exchangers - From water to water - Used in district heating - Tests for obtaining performance data
TS EN 1148 / A1 Heat exchangers - From water to water - Used in district heating - Tests for obtaining performance data
TS EN 1154 Building equipment - Controlled door closing devices - Features and test methods
TS EN 1154 Building equipment - Controlled door closing devices - Features and test methods
TS EN 1154 / A1 / AC Building equipment - Controlled door closing devices - Features and test methods
TS EN 1155 / A1 / AC Building equipment - Electrically powered open holding devices for automatic two-way doors - Rules and test methods
TS EN 1170-1 Prefabricated concrete products-Glass fiber reinforced cement (ctç) test method - Part 1: Measurement of matrix consistency, "slamp test" method
TS EN 1170-2 Prefabricated concrete products-Glass fiber reinforced cement test method - Part 2: Measurement of fiber content in fresh ctç "washing test
TS EN 1170-3 Prefabricated concrete products-Glass fiber reinforced cement (ctç) test method - Part 3: Measurement of fiber content of spray ctc
TS EN 1170-4 Prefabricated concrete products - Glass fiber reinforced cement (CTT) test method - Part 4: Determination of flexural strength "simple flexural test" method
TS EN 1170-5 Prefabricated concrete products-Glass fiber reinforced cement (ctc) test method - Part 5: Determination of flexural strength "full flexural test" method
TS EN 1170-7 Prefabricated concrete products-Glass fiber reinforced cement test method - Part 7: Measurement of the greatest dimensional changes due to moisture
TS EN 1170-8 Test method for glass-fiber-reinforced cement - Part 8: Repetitive weathering type test
TS 1176 Design and application principles of gas installation in buildings
TS EN ISO 1182 The reaction of building products to fire tests - Flammability test
TS EN 1194 Timber - Glued laminated timber - Strength classes and determination of characteristic values
TS EN 1195 Timber - Test methods - Performance of floor covering in buildings
TS EN 1195 Timber - Test methods - Performance of floor covering in buildings
TS 1196 Electrical installation project principles
TS 15 EN 1213 Valves - Used in buildings - Copper alloy stop valves for drinking water supply - Tests and specifications
TS 1248 Concrete preparation, casting and maintenance rules - In abnormal weather conditions
TS 1248 Concrete construction, casting and maintenance rules -In abnormal weather conditions
TS EN 1194 Timber - Glued laminated timber - Strength classes and determination of characteristic values
TS EN 1195 Timber - Test methods - Performance of floor covering in buildings
TS EN 1195 Timber - Test methods - Performance of floor covering in buildings
TS 1196 Electrical installation project principles
TS 15 EN 1213 Valves - Used in buildings - Copper alloy stop valves for drinking water supply - Tests and specifications
TS 1248 Concrete preparation, casting and maintenance rules - In abnormal weather conditions
TS 1248 Concrete construction, casting and maintenance rules -In abnormal weather conditions
TS 1247 Concrete construction, casting and maintenance rules (under normal weather conditions)
TS 1258 Clean water installation account rules
TS 1260 / tst T Carrier flooring bricks (participating in static work)
TS EN 1264-3 Floor heating - Systems and components - Part 3: Sizing
TS EN 1264-4 Floor heating - Systems and components - Part 4: Installation
TS EN 1264-5 Floor-mounted hot-water heating systems section 2: Floor and ceiling embedded heating and cooling surfaces - for determination of thermal power
TS EN 1286 Plumbing fixtures-Low pressure mixers with mechanical mixers-General technical specifications
TS EN 1287 Plumbing - Low pressure thermostatic mixing valves - General specifications
TS EN 1294 Door leaves - Determination of the behavior under the effect of moisture changes in consecutive uniform climatic conditions
TS EN 1296 Flexible sheets - Bitumen, plastic and rubber sheets for waterproofing on roofs - Artificial aging method by long-term exposure to high temperatures
TS EN 1297 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Artificial aging methods with long-term exposure to UV radiation, high temperature and water combination
TS EN 1298 Mobile access and working towers - Guidance rules for the preparation of instruction manual
TS EN 1337-9 Bearings- Used in structures- Part 9: Protection
TS EN 1337-2 Bearings - Used in buildings - Part 2: Sliding elements
TS EN 1337-7 Bearings - Used in structures - Part 7: Spherical and cylindrical ptfe bearings
TS EN 1337-1 Bearings - Used in structures - Part 1: General design rules
TS EN 1337-3 Bearings - Used in structures - Part 3: Elastomeric bearings
TS EN 1337-4 Bearings - Used in structures - Part 4: Roller bearings
TS EN 1337-4 / AC Bearings - Used in structures - Part 4: Roller bearings
TS EN 1337-5 Bearings - Used in structures - Part 5: Cup bearings
TS EN 1337-6 Bearings - Used in structures - Part 6: Cradle bearings
TS EN 1337-8 Bearings - Used in structures - Part 7: Guide bearings and thrust bearings
TS EN 1337-10 Bearings - Used in structures - Part 10: Inspection and maintenance
TS EN 1347 tile adhesives - Determination of wettability
TS EN 1352 Gas concrete or lightweight aggregate porous concrete - Determination of static elasticity modulus under pressure
TS EN 1353 Determination of gas concrete-Moisture content
TS EN 1354 Porous lightweight concrete - Determination of compressive strength
TS EN 1356 Gas concrete or lightweight aggregate porous concrete - Performance testing of pre-reinforced reinforced components under lateral loads
TS EN 1367-2 Tests for thermal and degradation properties of aggregates - part 2: Magnesium sulfate test
TS EN 1367-3 Tests for thermal and decomposition properties of aggregates - Part 3: Boiling test for "sonnenbrand basalt"
TS EN 1367-1 Tests for the determination of thermal and decomposition properties of aggregates - part 1: Determination of resistance to freezing and thawing
TS EN 1367-4 Tests for thermal and wear properties of aggregates - Part 4: Determination of drying shrinkage
TS EN 1380 Wood structures - Test methods - Load-bearing nails, screws, dowels and bolts
TS EN 1430 Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions
TS EN 1431 Bitumens and bituminous binders - Determination of binder and distilled petroleum product content by distillation from bitumen emulsions
TS EN 1443 Chimneys - General rules
TS EN 1451-1 Plastic pipe systems - Used for disposal of cold and hot wastewater in buildings - Section of polypropylene (pp) 1: Pipes, fittings and system features
TS EN 1451-1 / T1 Plastic pipe systems-Used for disposal of cold and hot wastewater in building-Polypropylene (pp) section 1: Pipes, fittings and system properties
TS EN ISO 1452-2 Plastic pipe systems - For drinking and potable water - Used in underground and surface pressure sewage systems - Polyvinyl chloride (pvc-U) without plasticizer - Part 2: Pipes
TS EN ISO 1452-3 Plastic pipe systems - Used in potable and domestic water and underground and surface pressure drainage and sewerage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 3- Fittings
TS EN ISO 1452-4 Plastic pipe systems - Used for potable and potable water and underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 4: Valves
TS ENV 1452-6 Plastic piping systems for potable and potable water - Polyvinylchloride without plasticizer (pvc-U) - Part 6: Laying rules
TS EN ISO 1452-5 Plastic pipe systems - For drinking and potable water and for underground and surface pressure sewage systems - Part of polyvinyl chloride (pvc-U) without plasticizer 5: System suitability
TS 1480 Mud traps and rain funnels (for rainwater grating sets and sewer manhole covers)
TS 1480 / T1 Mud traps and rain funnels (for rainwater grating sets and sewer manhole covers)
TS EN 1488 Valves - Used in buildings - Expansion groups - Tests and features
TS EN 1489 Valves - Used in buildings - Pressure safety valves - Tests and specifications
TS 1499 Heating radiators
TS EN 1504-7 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 7: Protection of reinforcement against corrosion
TS EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 2: Surface protection systems for concrete
TS EN 1504-4 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 4: Structural bonding
TS EN 1504-1 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 1: Recipes
TS EN 1504-10 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 10: Application of products and systems on site and quality control of works
TS EN 1504-3 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 3: Structural and non-structural repair
TS EN 1504-6 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - Part 6: Anchoring of steel reinforcing bars
TS EN 1505 Ventilation in buildings-Made of sheet metal-Rectangular cross-section air ducts and fittings-Dimensions
TS EN 1506 Ventilation in buildings-Channel network-Circular cross-section sheet metal air ducts-Fasteners-Dimensions
TS EN 1507 Ventilation in buildings-Duct network-Rectangular cross-section sheet metal air ducts-Strength and tightness-Features and tests
tst EN 1520 / AC: 2003 (Priority 2) Prefabricated reinforced concrete components - Made of porous lightweight concrete
TS EN 1520: 2011 Prefabricated reinforced concrete components made of porous lightweight concrete with structural or non-structural reinforcement
TS EN ISO 1522 Paints and varnishes - Pendulum damping test
TS EN 1523 Window, door - Shutters and shutters - Bullet resistance - Test method
TS EN 1530 Door leaf - General and position uniformity - Tolerance classes
TS EN 1543 Concrete structures - Products and systems for protection and repair - Test methods - Determination of tensile strength increase in polymers
TS EN 1543 Concrete structures - Products and systems for protection and repair - Test methods - Determination of tensile strength increase in polymers
TS EN 1544 Concrete structures - Products and systems for protection and repair - Inspection methods - Synthetic resin products used for anchoring of reinforcing bars (pc) - Determination of creep under continuous tensile loads
TS EN 15815: 2011 Polymer modified bitumen thick covers for waterproofing - Compression resistance
TS EN 1555-4 Plastic piping systems for the transport of gas fuels from polyethylene (pe) - Part 4: Valves
TS EN 1567 / T1 Valves - for buildings - Water pressure reducing and combined water pressure reducing valves - Features and tests
TS EN 1602 Thermal insulation materials for buildings - Determination of apparent density
tst ENV 1627 Windows, doors, shutters - Theft resistance - Terms and classification
TS EN 1634-2 Fire resistance tests - Doors and shutters - Part 1: Fire resistance and smoke control tests for doors, shutters and shutters and building hardware components - Part 2: Test for characterization of fire resistance
TS 1664 Polygonal point reclamer plant and construction rules
TS 1665 Parcel corner designation and construction rules
TS 1666 landmarks point construction and installation rules
TS 1667 Reconstruction site corner designation and construction rules
TS 1668 Leveling point survey facilities and construction rules
TS 1669 Installation and construction rules
TS EN 1670 Building equipment - Corrosion resistance - Requirements and test methods
TS EN 1670 / AC Building equipment - Corrosion resistance - Rules and test methods
TS EN 1717 General features of pollution prevention devices for protection against contamination of drinking water in the water installation and backflow
TS EN 1738 Reinforced components made of aerated concrete - Determination of stresses in reinforcement under no load
TS EN 1739 Prefabricated components made of aerated concrete or lightweight aggregate, porous concrete - Determination of shear strength in joints between components against forces in joint plane
TS EN 1740 Prefabricated reinforcing components made of aerated concrete or lightweight aggregate porous concrete - Performance test on components subjected to loads in the longitudinal direction predominantly (vertical components)
TS EN 1742 Prefabricated components made of aerated concrete or lightweight aggregate porous concrete - Determination of shear strength between different layers of multilayer components
TS EN 1744-3 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by extraction of aggregates
TS EN 1744-6 Tests for chemical properties of aggregates - Part 6: Determination of the effect of recovered aggregate extract on the setting time of cement
TS EN 1744-4 Tests for chemical properties of aggregates - Part 4: Determination of water sensitivity of filler aggregates used in bituminous mixtures
TS EN 1744-5 Tests for chemical properties of aggregates - Part 5: Determination of acid-soluble chloride salts
TS CR 1752 Ventilation - Design rules for indoor environments for buildings
TS EN 1767 Concrete structures - Products and systems for protection and repair - Test methods - Analysis for infrared light
TS EN 1771 / AC Concrete structures - Products and systems for protection and repair - Test methods - Determination of injectability and splitting test
TS EN 1775 Gas supply - Gas piping for buildings - Functional recommendations with maximum operating pressure 5 bar and below
TS EN 1799 Concrete structures - Products and systems for protection and repair - Test methods - Tests for measuring the applicability of adhesives used in the structure to the concrete surface
TS 1812 Calculation, design and construction rules of elevators (for electrically operated people and freight elevators)
TS EN 1838 Lighting applications - Emergency lighting
TS EN 1847 Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing on roofs - Methods of exposure to liquid chemicals, including water
TS EN 1848-1 Flexible sheets for waterproofing - Determination of deviation from length, width and direction - Part 1: Bituminous sheets for roof waterproofing
TS EN 1849-2 Flexible sheets for roof waterproofing - Determination of thickness and unit area mass - Part 2: Plastic and rubber sheets
TS EN 1856-1 / AC Chimneys - Requirements for metal chimneys - Part 1: Ready chimney components
TS EN 1857 Chimneys - Components - Concrete chimney linings
TS EN 1881 Concrete structures - Products and systems for protection and repair - Inspection methods - Pull-out test method for anchoring products
TS EN 1886 Mechanical performance of air-conditioning units in buildings
TS EN 15817: 2011 Polymer modified bitumen thick covers for waterproofing - Water resistance
TS 1904 Door frames - Sheet steel
TS 1907 Concrete brackets for rainwater grate chimneys
TS 1907 / T1 Concrete bracelets for rainwater grating chimneys
TS EN 1931 Flexible sheets - For water tightness - Roofing bitumen, plastic and rubber sheets - Determination of water vapor permeability
TS EN 1934 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat meter
TS EN 1937 Hydraulic setting test method of compounds used in troweling and / or leveling - Standard mixing application rules
TS EN 1946-5 Thermal performance of building materials and elements - Specific criteria for the assessment of laboratories where heat transfer properties are measured - Part 5: Pipe test methods and measurements
TS EN 1946-5 Thermal performance of building materials and elements - Specific criteria for the assessment of laboratories where heat transfer properties are measured - Part 5: Pipe test methods and measurements
TS EN 1946-1 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 1: General criteria
TS EN 1946-1 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 1: General criteria
TS EN 1946-2 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 2: Measurements by enclosed hot table method
TS EN 1946-2 Thermal performance of building materials and products - Specific criteria for the evaluation of laboratories measuring heat transfer properties - Part 2: Measurements by enclosed hot table method
TS EN 1990 / A1 / AC Building design principles (eurocode)
TS EN 1990 Building design principles (eurocode)
TS EN 1990 / A1 Building design principles (eurocode)
TS EN 1991-1-4 / AC Impacts on structures - Part 1-4: General effects - Wind effects (eurocode 1)
TS EN 1991-2 Eurocode 1: Effects on structures - Part 2: Traffic loads on bridges
TS EN 1991-1-5 Eurocode 1: Effects on structures - Part 1-5: General effects - Thermal effects
TS EN 1991-1-6 Eurocode 1: Impacts on structures section 1-6: General impacts - Impacts during operation
TS EN 1991-4 Eurocode 1: Principles of design and impact of structures - Part 4: Silo and tank effects
TS EN 1991-4 Eurocode 1: Principles of design and impact of structures - Part 4: Silo and tank effects
Impacts on structures - Part 1991-1: General effects - Wind effects (eurocode 4) TS EN 1-1-4 / A1
TS EN 1991-1-5 / AC Effects on structures - Part 1-5: General effects - Thermal effects (eurocode 1)
TS EN 1991-1-3 / AC Impacts on structures - Part 1-3: General effects - Snow loads (eurocode 1)
TS EN 1991-2 / AC Eurocode 1: Effects on structures - Part 2: Traffic loads on bridges
TS EN 1991-1-7 / AC Effects on structures - Part 1-7: General effects - Accidental effects
TS EN 1991-1-7 Effects on structures - Part 1-7: General effects - Accidental effects
TS EN 1991-1-1 / AC Effects on structures - Part 1-1: General effects - Densities, self-weight of buildings and other loads to which they are subjected (eurocode 1)
TS EN 1992-1-1 / AC Design of concrete structures - Part 1-1: General rules and rules applicable to buildings (eurocode 2)
TS EN 1992-1-1 / AC Design of concrete structures - Part 1-1: General rules and rules applicable to buildings (eurocode 2)
TS EN 1992-2 Eurocode 2: Design of concrete structures - Part 2: Concrete bridges
TS EN 1992-2 Eurocode 2: Design of concrete structures - Part 2: Concrete bridges
TS EN 1992-1-2 Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
TS EN 1992-1-2 Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
1992-1-1: 2004 / AC: 2010 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
1992-1-1: 2004 / AC: 2010 Design of concrete structures - Part 1-1: General rules and rules to be applied to buildings (eurocode 2)
TS EN 1992-1-2 / AC Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
TS EN 1992-1-2 / AC Design of concrete structures - Part 1-2: General rules - Structural fire design (eurocode 2)
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (eurocode 2)
TS EN 1992-2 / AC Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules (eurocode 2)
TS EN 1993-1-5 / AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)
TS EN 1993-1-5 / AC Design of steel structures - Part 1-5: Plane plate structural elements (eurocode 3)
TS EN 1993-1-12 / AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)
TS EN 1993-1-12 / AC Design of steel structures - Part 1-12: Additional rules for the extension of the most 1993 standard series up to s 700 steel grade (eurocode 3)
TS EN 1993-1-6 / AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)
TS EN 1993-1-6 / AC Design of steel structures - Part 1-6: Strength and durability of shell structures (eurocode 3)
TS EN 1993-1-7 / AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)
TS EN 1993-1-7 / AC Design of steel structures - Part 1-7: Off-plane loaded plate structures (eurocode 3)
TS EN 1993-1-9 / AC Design of steel structures - Part 1-9: Fatigue (eurocode 3)
TS EN 1993-2 / AC Design of steel structures - Part 2: Steel bridges (eurocode 3)
TS EN 1993-2 / AC Design of steel structures - Part 2: Steel bridges (eurocode 3)
TS EN 1993-3-1 / AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)
TS EN 1993-3-1 / AC Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles (eurocode 3)
TS EN 1993-4-2 / AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)
TS EN 1993-4-2 / AC Design of steel structures - Part 4-2: Warehouses (eurocode 3)
TS EN 1993-4-3 / AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
TS EN 1993-4-3 / AC Design of steel structures - Part 4-3: Pipelines (eurocode 3)
TS EN 1993-4-1 / AC Design of steel structures - Part 4-1: Silos (eurocode 3)
TS EN 1993-4-1 / AC Design of steel structures - Part 4-1: Silos (eurocode 3)
TS EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles
TS EN 1993-3-1 Eurocode 3: Design of steel structures - Part 3-1: Towers, poles and chimneys - Towers and poles
TS EN 1993-1-1 Eurocode3: Design of steel structures - Part 1-1: General rules and building rules
TS EN 1993-1-1 Eurocode3: Design of steel structures - Part 1-1: General rules and building rules
TS EN 1993-1-2 Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)
TS EN 1993-1-2 Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)
TS EN 1993-1-9 Eurocode 3: Design of steel structures - Part 1-9: General rules - Fatigue
TS EN 1993-1-3 Eurocode 3: Design of steel structures - Part 1-3: General requirements - For cold-formed thin-gauge elements and sheet metal
TS EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar structures without lateral load effect
TS EN 1993-1-5 Eurocode 3: Design of steel structures - Part 1-5: General requirements - Additional requirements for planar structures without lateral load effect
TS EN 1993-1-10 / AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)
TS EN 1993-1-10 / AC Design of steel structures - Part 1-10: Material toughness and properties perpendicular to fibers (eurocode 3)
TS EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
TS EN 1993-6 Eurocode 3: Design of steel structures - Part 6: Crane support structures
TS EN 1993-1-11 / AC Design of steel structures - Part 1-11: Design of structures with tensile components (eurocode 3)
TS EN 1993-1-11 / AC Design of steel structures - Part 1-11: Design of structures with tensile components (eurocode 3)
TS EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures
TS EN 1993-1-6 Eurocode 3: Design of steel structures - Part 1-6: General rules - Additional rules for shell structures
TS EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates
TS EN 1993-1-7 Eurocode 3: Design of steel structures - Part 1-7: General requirements - Additional requirements for structures with out-of-plane loaded plane plates
TS EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
TS EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
TS EN 1993-3-2 Design of Eurocode 3 steel structures - Part 3-2: Towers, poles and chimneys - Chimneys
TS EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos
TS EN 1993-4-1 Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos
TS EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses
TS EN 1993-4-2 Eurocode 3: Design of steel structures - Part 4-2: Silos, warehouses and pipelines - Warehouses
TS EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS EN 1993-4-3 Eurocode 3: Design of steel structures - Part 4-3: Silos, warehouses and pipelines - Pipelines
TS EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles
TS EN 1993-5 Eurocode 3: Design of steel structures - Part 5: Piles
TS EN 1993-6 / AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS EN 1993-6 / AC Design of steel structures - Part 6: Crane support structures (eurocode 3)
TS EN 1993-5 / AC Design of steel structures - Part 5: Piles (eurocode 3)
TS EN 1993-5 / AC Design of steel structures - Part 5: Piles (eurocode 3)
TS EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components
TS EN 1993-1-11 Design of steel structures - Part 1-11: Design of structures with pre-fabricated tension components
TS EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade
TS EN 1993-1-12 Design of steel structures - Part 1-12: Additional rules for the extension of the most 1193 standard series up to s 700 steel grade
TS EN 1993-1-2 / AC Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)
TS EN 1993-1-2 / AC Design of steel structures - Part 1-2: general rules - Structural design against fire (eurocode 3)
TS EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1993-1-4 Eurocode 3: Design of steel structures - Part 1-4: General requirements - Additional requirements for stainless steel
TS EN 1994-2 Eurocode 4: Design of steel and concrete composite structures - Part 2: General rules and rules for bridges
TS EN 1994-2 Eurocode 4: Design of steel and concrete composite structures - Part 2: General rules and rules for bridges
TS EN 1994-2 Eurocode 4: Design of steel and concrete composite structures - Part 2: General rules and rules for bridges
TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)
TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)
TS EN 1994-1-2 / AC Design of steel and concrete mixed structures - Part 1-2: General rules - Structural fire design (eurocode 4)
TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire
TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire
TS EN 1994-1-2 Eurocode 4: Eurocode4: Design of steel structures - Part 1-2: General rules - Design of building fire
TS EN 1995-1-1 / AC Eurocode 5: Design of wooden structures section 1-1: General rules and building rules
TS EN 1995-1-1 / AC Eurocode 5: Design of wooden structures section 1-1: General rules and building rules
TS EN 1995-2 Eurocode 5 - Design of wooden structures - Part 2: Bridges
TS EN 1995-2 Eurocode 5 - Design of wooden structures - Part 2: Bridges
TS EN 1995-1-1 Eurocode 5: Design of wooden structures section 1-1: General rules and building rules
TS EN 1995-1-1 Eurocode 5: Design of wooden structures section 1-1: General rules and building rules
TS EN 1995-1-2 Eurocode 5: Design of wooden structures section 1-2: General rules - Design of structural fire
TS EN 1995-1-2 Eurocode 5: Design of wooden structures section 1-2: General rules - Design of structural fire
TS EN 1998-1 / AC Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings (eurocode 8)
TS EN 1995-1-1 / A1 Design of wooden structures - Part 1: General - General rules and rules to be applied to buildings (eurocode 5)
TS EN 1995-1-1 / A1 Design of wooden structures - Part 1: General - General rules and rules to be applied to buildings (eurocode 5)
TS EN 1996-1-2 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN 1996-1-2 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
TS EN 1996-2 Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...
TS EN 1996-2 Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...
TS EN 1996-3 Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures
TS EN 1996-3 Eurocode 6: Design of masonry structures - Part 3: Simple calculation method for unreinforced masonry structures
TS EN 1996-2 / AC Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...
TS EN 1996-2 / AC Eurocode 6: Design of masonry structures - Part 2: Design criteria, material selection and application to masonry ...
TS EN 1997-1 Eurocode 7: Geotechnical design - Part 2: General rules
TS EN 1998-1 Eurocode 8: Design of earthquake resistant structures - Part 1: General rules, seismic effects and rules for buildings
TS EN 1998-6 Design of earthquake resistant structures - Part 6: Towers, poles and chimneys
TS EN 1998-3 Eurocode 8: Design of earthquake resistant structures section 3: Evaluation and strengthening of buildings
tst EN 1998-6 Design of earthquake resistant structures - Part 6: Towers, poles and chimneys
TS EN 1998-5 Earthquake resistant construction design - Part 5: Foundations, ground bearing structures and geotechnical aspects (eurocode 8)
TS EN 1998-4 Eurocode 8: Design of earthquake-resistant structures - Part 4: Silos, tanks and pipelines
TS EN 1999-1-4 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 1999-1-4 Design of aluminum structures - Part 1-4: Cold formed building boards (eurocode 9)
TS EN 1999-1-5 Design of aluminum structures - Part 1-5: Shell structures (eurocode 9)
TS EN 1999-1-5 Design of aluminum structures - Part 1-5: Shell structures (eurocode 9)
TS EN 1999-1-1 / A1 Design of aluminum structures - Part 1-1: General structural rules (eurocode 9)
TS EN 1999-1-1 / A1 Design of aluminum structures - Part 1-1: General structural rules (eurocode 9)
200977002 Hygienic air conditioning and ventilation project preparation, delivery and periodic maintenance in hospitals
200977002 Hygienic air conditioning and ventilation project preparation, delivery and periodic maintenance in hospitals
tkt 201081971 Coating material - used for thermal insulation - Mineral based
TS 2015 Modular coordination "large modules" for horizontal coordination dimensions
TS 2018 Modular coordination Coordination dimensions for interior and exterior doors
TS 2019 Modular coordination Coordination dimensions for flat, rigid sheets and panels used in buildings
TS 2164 Heating installation design rules
TS 2164 / T1 Heating installation design rules
TS 2164 / T2 Heating installation design rules
TS 2164: 1983 / T3 Heating installation design rules
TS 2166 Design and regulation of waste chimneys in buildings
TS 2167 Installation chimney and duct design and regulation rules
TS 2344 Basic measurement rules and acceptable error limits of triangulation networks
TS 2345 Measurement rules and acceptable error limits with pole star in triangulation networks
TS 2363 Horizontal angle measurement rules and acceptable error limits in triangulation networks
TS 2395 Polygon point facility and construction rules
TS 2396 Leveling point facility and construction rules
TS 2491 Sound insulation materials made of polystyrene rigid foam plastics (used for impact sound insulation in buildings)
TS 2510 Masonry walls calculation and construction rules
TS 2510 Masonry walls calculation and construction rules
TS 2517 Determination of potential alkali silica reactivity of aggregates - chemical method
TS 2517 Determination of potential alkali silica reactivity of aggregates - chemical method
TS 2594 Classification of maps and plans according to their scales
TS 2672 Scales in large scale maps and plans
tst 2747 Urinals (of ceramic)
tst 2748 Bidets (of ceramics)
tst 2750 Shower trays, ceramic
TS 2787 Landmark facilities and construction rules
TS 2797 300 000 Rules for the design and installation of safety equipment in closed and open system hot water heating plants with thermostat safety leaving water temperature up to 110øc up to kcal / h
TS 2878 ISO 3258 Air distribution and air diffusion - Terms
tst 2941 Determination of unit weight, yield and air content in fresh concrete by weight method
TS 2968 Determination of floor loads in production buildings (factory, workshop, workshop, etc.) and warehouses
TS 2987 Determination of setting time of concrete by measuring penetration resistance
TS 2987 Determination of setting time in concrete
TS 3097 Plane triangle calculation chart
Information to be found in maps and plans according to TS 3098 Scales
TS 3173 General boundary point installation and construction rules
TS 3174 Layout section and numbering rules on local maps and plans made by local method
TS 3175 Triangulation polygon points summary information chart and arrangement
TS 3176 Method for calculating forward-point coordinates and spreadsheet
TS 3226 Polygon edge length measurement and chart (with steel measuring tape)
TS 3227 General summary table and layout of triangulation values
TS 3228 Method of converting horizontal angle observations from the outer center point to the center point and the spreadsheet
TS 3233 Calculation and construction rules of prestressed concrete structures
TS 3233 / T1 Calculation and construction rules of prestressed concrete structures
tst 3234 Bimsbeton construction rules, mixture calculation and test methods
tst 3260 Determination of approximate concrete strength by concrete surface hardness
TS 3261 Determination of the amount of air in fresh concrete by volume method
TS 3322 Concrete - Hardened concrete tests - Determination of length changes in cement mortar and concrete samples
TS 3322 Determination of length changes in cement mortar and concrete samples
TS 3322 Concrete - Hardened concrete tests - Determination of length changes in cement mortar and concrete samples
TS 3323 Preparation of concrete pressure test specimens, accelerated curing and compressive strength test
TS 3325 Horizontal angle measurement and sequence summary charts and editing method in triangulation networks
TS 3359 Reciprocal - Method for calculating mixed shear point coordinates and spreadsheet
TS 3418 Measurement of fluid flow in pipes terms and symbols
TS 3419 / T1 Ventilation and air conditioning plants - Design rules
TS 3420 Rules for installation of ventilation and air conditioning facilities
tst 3449 Determination of strength factor in concrete under rapid freezing and thawing conditions
TS ISO 1920-8: 2009 Concrete tests - Part 8: Determination of drying shrinkage of concrete for samples prepared on site or in laboratory
tst 3455 Method of determination of permeability coefficient in concrete
TS 3500 Symbols for installation projects
TS 3505 Prefabricated concrete canal saddles
TS 3505 / T1 Prefabricated reinforced concrete canal saddles
TS 3528 Aggregate - Used in concrete - Determination of light material
TS 3528 Determination of lightweight content in concrete aggregates
TS 3531 Prefabricated reinforced concrete canals
TS 3531 / T1 Prefabricated reinforced concrete canals
TS 3538 / T1 Plastic fittings (for plumbing)
TS 3540 Prefabricated reinforced concrete duct sealing gaskets
TS 3540 Prefabricated reinforced concrete duct sealing gaskets
TS 3541 Rules for the application of thermal insulation material from mineral fibers to heating and ventilation installations
TS 3541 Rules for the application of thermal insulation material from mineral fibers to heating and ventilation installations
TS 3613 Modular coordination - Building ladders and stairwell coordination dimensions
TS ISO 3648 / cor 1 Aviation fuels - Net specific energy forecast; Technical printing error 1
TS ISO 3648 Aviation fuels - Net specific energy forecast
TS 3649 Perlite thermal insulation concrete-Construction-Application rules and test methods
TS 3664 Triangulation, polygon and leveling nets, canopy and arrangement rules
TS 3683 Prefabricated reinforced concrete canal stands and foundation blocks
TS 3722 Construction, maintenance and application rules of perlite plaster and plaster mortars
TS 3722 Construction, maintenance and application rules of perlite plaster and plaster mortars
TS 3764 Concrete blocks - Mines - Used in underground road support
TS 3818 Heating systems - Design, installation and safety rules of gas central combustion plants
TS 3818 / T1 Heating systems - Design, installation and safety rules of gas central combustion plants
TS 3889 Map supports
TSE ISO / TR 3956 Principles of structural fire engineering design - Heating of standard fire resistance test with actual fire exposure
TS 4046 / tst T Prefabricated wall panels, made of lightweight aggregate concrete, with hollow
TS 4060 Sills - Made of concrete, ready
TS 4063 Parapets - Made of concrete, ready
TS EN 4131 / AC Aerospace series - Bolts, normal hex head, coarse tolerant thread, medium length thread, made of heat-resistant nickel-based alloy, with aluminum iv coated - Classification: 1250 mpa (at ambient temperature) / 425 ° c
TS ISO 4190-6 Elevators and service lifts - Part 6: Human elevators for residential use - Planning and selection
TS ISO 4190-6 / T1 Elevators and service elevators - Part 6: Human elevators for residential use - Planning and selection
TS 4192 Wood floor blocks - Terms, definitions
TS 4193 Wood floor blocks - General features
TS 4194 Wood floor wedges - Appearance characteristics of hard wood wedges
TS EN 4421 Heat reflectors and radiators (radiators and convectors) - Part 1: Technical specifications and rules
TS 4447 Gypsum - ground (used in agriculture)
tst 7044-1 ISO 4463-1 Building measurement methods - Specifying boundaries and measuring - Part 1: Planning and organization, measuring procedures, acceptance criteria
TS ISO 4463-1 Building measurement methods - Determination of limits and measurement - Part 1: Planning and organization, measurement procedures, acceptance criteria
TS ISO 4463-2 Building measurement methods - Determination of limits and measurement - Part 2: Measuring stations and target points
TS ISO 4463-3 Building measurement methods - Determination of limits and measurement - Part 2: Checklist for studies and procurement of measuring services
TS 4562 / tst T Factory Bricks - For Walls - Clinker Bricks
TS EN 4591 Building lime - Part 1: Definitions, specifications and conformity criteria
TS 4634 Map- Plastic sheets
TS 4635 Map- Paper sheets
TS 4688 Map - Method of calculation of vertical orthogonal coordinates of polygon points
TS ISO 7465 Lifts for people and goods - Guide rails for lift cars and counterweights - Type T
TS 4790 Test method of brick and tile soils
tst 4834 Concrete related terms
TS ISO 4872 Acoustics - Measurement of airborne noise emitted from construction machinery and equipment intended for outdoor use - Determination of compliance with noise limits
TS EN ISO 5135 Acoustics - Measurement of noise power levels in ventilation rooms, units, dampers and valves
TS 5228-1 EN 233 Wall coverings - Roll - Properties of finished wallpapers, wall vinyls and plastic wall coverings
TS 5228-5 EN 235 Wall coverings - Terms, descriptions and symbols
TS 5253 Map - Conditional balancing of angle-measured main triangulation networks measured by the direction method
TS 5410 Chamotte and high alumina refractory bricks - used in cement rotary kilns
TS 5695 Building and cladding stones - Sure - Classification
TS 5762 Diabase-Used as building and cladding stone
TS 5762 / T1 Diabase-Modification used as building and cladding stone 1
TS 5762 / tst T2 Diabase-Modification used as building and cladding stone 2
TS 5893 ISO 3893 Concrete - Classification according to compressive strength
TS 5895 Rules for the operation and maintenance of central air conditioning and ventilation plants
TS 5961 Serpentine - used as building and cladding stone
TS 5961 / T1 Serpentine - Modification used as a building and cladding stone 1
TS 5961 / tst T2 Serpentine - Modification used as building and cladding stone 2
S 6007 EN 949 Windows and curtain walls, doors, blinds and louvers - Determination of impact resistance with soft and heavy objects on doors
TS 6081 Calculating the largest outer diameter of the cables used in indoor installation
TS 6084 EN ISO 7389 Building construction - Joint materials - Determination of elastic recovery of sealing materials
TS 6134 Test equipment for electricity meters
TS 6165 Building dimension tolerances - Part 1: Basic principles to be applied in assessment and specifications
tst ISO / TR 6167 Fire resistance tests - Supporting suspended ceilings for the protection of steel beams in floor and roof construction
TS 6234 Granite - used as a building and cladding stone
TS 6234 / T1 Granite - Modification used as building and cladding stone 1
TS 6234 / tst T2 Granite - Modification used as building and cladding stone 2
TS 6356 Natural gas meters - Connection heads with two connections
TS 6356 / T1 Natural gas meters - Connection heads with two connections
TS 6356 / T2 Natural gas meters - Connection heads with two connections
TS 6356 / T3 Natural gas meters - Two connection connection heads modified 3
TS 6356 / T4 Natural gas meters - Connection heads with two connections
TS 6486 Map - Angle - Edge metering triangulation networks for indirect balancing rules
TS 6573 Building tolerances-General acceptance principles, compliance with dimensional tolerance limitations and statistical evaluation
TS 6793 Use and settlement loads in residential and public buildings
TS 6793 Use and settlement loads in residential and public buildings
TS 6874 EN ISO 9251 Thermal insulation - Heat transfer conditions and material properties - Terms and definitions
TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity -Calculation method
TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity -Calculation method
TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity - Calculation method
TS EN ISO 6946 Building components and building elements - Thermal resistance and thermal conductivity - Calculation method
TS 7045 Measurement methods in buildings-General principles and procedures for determination of suitability in terms of size
TS 7095 Building tolerances-Pre-determination of dimensional compatibility between building components with normal size distribution by statistical methods
TSE EEC / 71 / 318: Council regulation 2001 on the approximation of the laws of the member states relating to gas meters, 26 july 1971 date and 71 / 318 / at (82 / 623 / at, 78 / 365 / at, 74 / at, 331 amended by the commission regulations)
tst 7232 Tubular fibrous thermal insulation material
TS EN ISO 7235 Acoustics - Laboratory measurement procedures for silencers and air termination units mounted in the ventilation duct - Loss of plug, flow noise and total pressure loss
TS 7352 Building tolerances-Pre-determination of dimension matching between processes and elements for target size selection
TS 7399 Building tolerances - Number sequences that can be used to specify tolerance
TS 7400 Building tolerances - Pre-determination and determination of tolerances of dimension deviations of the building parts to be generated by the assembly of separate elements
TS 7509 Preformed snap-on compression solid vulcanized sealing materials (used in rubber construction seals)
TS 7720 Horizontal joints between load-bearing walls and reinforced concrete slabs - Mechanical laboratory tests - Effects of vertical loads and moments transmitted from slabs
TS 7749 Building construction-Application, measurement and topographic operations-Description of concepts and guiding notes
TS 7817 Air purge device (automatic)
TS 7850 Turkish baths - General rules
TS 8024 Reliability of structures - General terms
TSE / TS 8038 Liquefied petroleum gases (lpg) - Guide for odorizing gases
TS EN ISO 18233 Acoustics - Application of new measurement methods in building and room acoustics
TS 8238 ISO 4190-2 Elevators - Dimensions related to installation section 2: Class iv elevators
TS 8239 Elevators- Automatic doors- Dimensions related to installation- Class 5- Service elevators
TS ISO 2444 Joints - Generated in buildings - Terms and recipes
TS 8276 General control rules for external wall dilatation in buildings
TS ISO 8301 Thermal insulation - Determination of thermal resistance and related properties in steady state - Methods for determination of heat flow
TS ISO 8302 Thermal insulation - Determination of thermal resistance and related properties in steady state - Enclosed hot plate device
TS EN ISO 8339 Building construction-Joint materials-Joint sealing materials-Determination of tensile properties
TS EN ISO 8340 Building construction-Joint materials-Joint sealing materials-Determination of tensile properties at constant elongation
TS 8481 EN 39 Scaffoldings - Pipe and jointing elements - Easy to fit steel pipes - Technical delivery conditions
TS EN ISO 8970 Wood structures - Testing of joints made with mechanical binders - Wood density criteria
TS EN ISO 9046 Building construction - Joint sealing materials - Determination of adhesion and cohesion properties at constant temperature
TS 9111 Accessibility requirements for people with disabilities and mobility impairments
TS 9111 Accessibility requirements for people with disabilities and mobility impairments
TS 9128 Pipes - Made of rigid pvc for drainage
TS ISO 9194 Design principles of structures-Stored materials with and without carriers-Density
TS EN ISO 9288 Thermal insulation - Heat transfer with radiation - Physical quantities and recipes
TS ISO 9386-2 Power-driven lifting platforms for mobility-impaired people - Safety, dimensions and functional requirements - Part 2: Power-driven stair lift for moving users, standing users and wheelchair users in a tilted plane
TS ISO 9386-1 Power-driven lifting platforms for the disabled - Requirements for safety, dimensions and functional operation - Part 1: Vertical lifting platforms
TS 9725 Construction and excavation machinery - Principles for operator training
TS 9876 EN 303-4 Boilers-Section 4: Boilers with forced draft burners-Heat power 70 kw and maximum operating pressure 3 bar (0,3 mpa) boilers with forced draft liquid fuel burners-Terminology, special conditions, tests and markings
TSE K 128 One component, flexible, acrylic based waterproofing material
TS ISO 9882 Performance standards in construction-Prefabricated concrete slabs-Performance test-Behavior under non-point loading
TS ISO 9883 Performance standards in construction-Prefabricated concrete slabs-Performance test-Behavior under point loading
TSE 9954-7 CEN ISO / TS 15876-7 Plastic piping systems - Used in hot and cold water systems - Polybutylene (pb) - Part 7: Conformity assessment guide
tst 9967 Building elements, bearing systems and buildings - Prefabricated reinforced concrete and prestressed concrete - Calculation and production rules
TS EN ISO 10077-1 Thermal performance of windows, doors and louvers - Calculation of heat conduction - Part 1: Simplified method
Tests for general characteristics of aggregates - Part 10088: Process and terminology for simplified petrographic identification TS 932 EN 3-1 / A3
TS 10110 Asphalt distributor
TS 10110 / T1 Asphalt distributor modification 1
TS 10118 Construction and excavation machines-Tensile rod measurement method
TS 10119 Construction and excavation machinery - Training of operation and maintenance technicians
10140-4: 2010 Acoustics - Laboratory measurement of sound insulation in building elements - Part 4: Measurement procedures and rules
TS EN ISO 10140-5: 2010 Acoustics - Laboratory measurement of sound insulation in building elements - Part 1: Rules for test sites and equipment
TS 10202 Construction machinery-Concrete mixer
TS 10203 Construction and excavation machinery-Rollers, roller and tire wetting systems
TS 10204 Construction and excavation machines-Road rollers-Vibration systems
TS 10206 Trowel
TS 10272 Numbering of buildings - Plate and number dimensions
TS 10157 / Tadil G Cement - Sulfate resistant cement - Composition, properties and conformity criteria
TS 10280 Construction and excavation machinery-Protection and storage
TS 10286 Excavators and loaders for construction and excavation machinery
TS 10325 Concrete mixers
TS EN ISO 10426-3 Steel products - Inspection documents - Information and recipes list
TS EN ISO 10426-4 Oil and gas industry - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement mortars at atmospheric pressure
TS EN ISO 10426-5 Oil and gas industry-Cements and materials for well cementing-Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications
TS EN ISO 10426-6 Oil and gas industry-Cements and materials for well cementing-Part 6: Methods for determination of statil gel strength of well cement formulations
tst EN ISO 10426-2 (Priority *) Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements
TS EN ISO 10426-2 / AC Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements
TS EN ISO 10426-2 / A1 Oil and gas industry - Cements and materials for well cementing - Part 2: Tests for well cements
TS 10449 Marble-Calcium carbonate based-Used as building and cladding stone
TS 10449 / T1 Marble-Calcium carbonate-based modification used as structure and cladding stone 1
TS 10449 / tst T2 Marble-Calcium carbonate-based modification used as building and cladding stone 2
TS EN ISO 10456 Building components and building products - Hygothermal properties - Design values and procedures given in tabulated form for determination of design and thermal values
tst 10465 Concrete test methods - Sampling of hardened concrete in building and structural components and determination of compressive strength (destructive method)
TS EN ISO 10545-5 Ceramic tiles section 5: Determination of impact strength- By measuring bounce coefficient
TS EN ISO 10545-7 Ceramic tiles- Part 7: Glazed tiles- Determination of surface abrasion resistance
TS EN ISO 10545-9 Ceramic tiles - Part 9: Determination of heat shock resistance
TS EN ISO 10545-11 Ceramic tiles - Part 11: Glazed tiles - Determination of crack strength of glaze
TS EN ISO 10545-12 Ceramic tiles section 12: Determination of frost resistance
TS EN ISO 10545-15 Ceramic tiles - Part 15: Determination of extracted lead and cadmium from glazed tiles
TS 10551 Urban design - Car park design rules for cars
TS EN ISO 10563 Building construction - Joint materials - Determination of mass and volume changes
TS EN ISO 10590 Building construction - Determination of adhesion and cohesion properties under shrinkage after immersion of joint materials in water
TS EN ISO 10591 Building construction - Determination of adhesion and cohesion properties after dipping joint materials into water
TS 10690 Construction and excavation machinery-Loaders tipping loads and methods of measuring buoyancy of equipment
TS 10762-2 EN ISO 15875-2 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 2: Pipes
TS 10762-3 EN ISO 15875-3 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 3: Fittings
TSE 10762-7 CEN ISO / TS 15875-7 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 7: Conformity assessment guide
TS 10824 Construction machinery-Compactors
TS 10831 Construction and excavation machinery-Service tools-Part 1-For general maintenance and adjustment-Type and dimensions
TS 10834 Gabbro-used as a building and cladding stone
TS 10834 / T1 Modification used as gabbro-building and cladding stone 1
TS 10834 / tst T2 Gabro-modification used as a building and cladding stone 2
TS 10835 Andesite-Used as building and cladding stone
TS 10835 / T1 Andesite - Modification used as building and cladding stone 1
TS 10835 / tst T2 Andesite - Modification used as a building and cladding stone 2
10848-4: 2010 Acoustics - Measurement of lateral transmission of airborne sound and impact sound between adjacent rooms in the laboratory - Part 4: At least one heavy element bonding application
TS 10912 Jaw Crushers
TS 11051 Drilling cement-Manufacturing additives-General rules
TS 11135 Trakit - Used as a building and cladding stone
TS 11135 / T1 Trakit - Modification used as building and cladding stone 1
TS 11135 / tst T2 Trakit - Modification used as building and cladding stone 2
TS 11137 Limestone (limestone) - used as building and cladding stone
TS 11137 / T1 Limestone (limestone) - Modification used as a building and cladding stone 1
TS 11137 / tst T2 Limestone (limestone) - Modification used as a building and cladding stone 2
TS 11143 Travertine - used as building and cladding stone
TS 11143 / T1 Travertine - Modification used as building and cladding stone 1
TS 11143 / tst T2 Travertine - Modification used as building and cladding stone 2
TS 11145 Conglomerate - used as building and cladding stone
TS 11145 / T1 Conglomerate - Modification used as building and cladding stone 1
TS 11145 / T2 Conglomerate - used as building and cladding stone
TS 11145 / tst T2 Conglomerate - Modification used as building and cladding stone 2
TS EN ISO 11296-1: 2011 Plastic pipe systems for the renovation of underground pressure-free drainage and sewage lines - Part 1: General
TS 11380 Side air fittings (auxiliary air regulators) - for residential and similar building chimneys
TS 11382 Chimneys-Steel (industrial)
TS 11384 Chimneys-Housing etc. building chimneys - Fittings design and construction rules
TS 11385 Chimneys-Housing etc. for buildings - conditions and evaluation criteria for test chimneys
TS 11386 Chimneys - for residential buildings and similar buildings - Design and construction rules
TS 11387 Chimneys - Rules for the construction of chimney sweeps in residential and similar buildings
TS 11394 + T3 Non-metal hose assemblies - Used for the safe connection of gas-fired devices (up to 10 kpa) - Gas hoses and connection fittings with connection plug
TS 11425 Insulation fittings-ready for installation for electrical insulation in building gas and water service lines
TS 11425 Insulation fittings-ready for installation for electrical insulation in building gas and water service lines
TS EN ISO 11431 Building construction - Joint materials - Determination of adhesion / cohesion properties of sealing materials after exposure to heat, water and artificial light passing through glass
TS EN ISO 11432 Building construction - Joint materials - Determination of compressive strength
TS 11443 / tst T2 Onyx marble - Calcium carbonate based - Modification used as building and cladding stone 2
TS 11444 / tst T2 Dolomite - Modification used as building and cladding stone 2
TSE CEN ISO / TS 15874-7 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 7: Conformity assessment guide
TS 11553 Syenite - used as building and cladding stone
TS 11553 / T1 XenUM-Modification used as a building and cladding stone 1
TS 11553 / tst T2 XenUM-Modification used as a building and cladding stone 2
TS EN ISO 11600 Building construction - Joint materials - Classification and requirements for sealing materials
TS 11602 Glass putty
TS 11669 Limestone (limestone) - used in lime manufacturing
TS 11746 Concrete chemical additives - Concrete antifreeze (fresh concrete and mortar frost protection agent in cold weather)
TS 11758-1 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 1: Specifications
TS 11758-1 / T1 Polymer bitumen covers-For waterproofing-Used in combination with fusion welding-Part 1: Features
TS 11758-2 Polymer bitumen covers - For waterproofing - Used in combination with fusion welding - Part 2: Application requirements
TS 11797 EN 947 Hinged and swing doors - Determination of resistance to vertical load
TS 11917 Fasteners - Nuts - Hexagon straight - Thin pitch - Tubular metal sheath - Electric heating elements - For
TS EN ISO 11925-2: 2010 / AC: 2011 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding
TS EN ISO 11925-2: 2010 / AC: 2011 Fire resistance tests - Flammability upon direct exposure to flame - Part 2: Test with single flame welding
TS 11929 Geothermal energy-Non-metallic sealing materials-Simulated geothermal test fluid immersion method
TS 12006 Space requirements in public buildings - Terms and definitions
TS 12007 Space requirement in public buildings - General common spaces - General rules
TS EN 12015 / tst T1 Electromagnetic compatibility (emu) - Product family standard for elevators, escalators and conveyor belts - Emission
TS EN 12045 Shutters and blinds operated by motor power - Operating safety - Measurement of the transmitted force
TS EN 12046-1 Operating forces - Test method - Part 1: Windows
TS EN 12046-2 Operating forces - Test method - Part 2: Doors
TS EN 12051 Building hardware - Door and window latches - Rules and test methods
TS EN 12056-5 Attractive drainage systems - Indoor - Part 5: Installation and testing, operation, maintenance and operating instructions
TS EN 12056-1 Attractive drainage systems - Indoor - part 1: General rules and performance rules
TS EN 12056-2 Attractive drainage systems - Indoor - section 2: Plumbing system - Design and calculation
TS EN 12056-3 Attractive drainage systems - Indoor - part 3: Roof drainage - Design and calculation
TS EN 12056-3 Attractive drainage systems - Indoor - part 3: Roof drainage - Design and calculation
TS EN 12056-4 Attractive drainage systems - Indoor - section 4: Wastewater lifting plants - Design and calculation
TS EN 12095 Plastic pipe systems - Supports for rainwater pipe systems -Support resistance test
TS EN 12095 Plastic pipe systems - Supports for rainwater pipe systems -Support resistance test
tst EN 12097 Ventilation for buildings - Ducts - Duct construction rules
TS EN 12098-5 Controls for heating systems - Part 5: Start-stop timers for heating systems "
TS EN 12109 Drainage systems for indoor use - vacuum
TS EN 12114 Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test methods
TS EN 12114 Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test methods
TS 12133 Terms and definitions used in electrotechnical lighting
TS EN 12149 Wall coverings - Rolls - Determination of formaldehyde and vinyl chloride released by heavy metals and some other elements
TS EN 12153 Curtain walls - Air permeability - Test method
TS EN 12155 Curtain walls - Water tightness - Laboratory test under static pressure
TS EN 12158-2 + A1 Construction cranes for articles - section 2: Inclined cranes with inaccessible load-carrying equipment
TS EN 12158-1 + A1 Construction cranes for articles - Part 1: Cranes with accessible platform
tst EN 12159 + A1 Construction cranes - For transporting personnel and materials - With vertical guide rail, with cab
tst EN 12159 + A1 Construction cranes - For transporting personnel and materials - With vertical guide rail, with cab
TS 12165 Construction Machinery-Concrete Plant
TS 12165 / T1 Construction machinery - Concrete Batching Plant
TS EN 12171 Heating systems - Preparation of documents for operation, maintenance and use of buildings - Heating systems without the need for trained personnel
TS EN 12179 Curtain walls - Resistance to wind loads - Test method
TSE 12182-7 CEN ISO / TS 15877-7 Plastic piping systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 7: Conformity assessment guide
TS EN 12188 Concrete structures - Products and systems for protection and repair - Test methods - Determination of bonding properties used in the structure by bonding steel to steel
TS EN 12190 Concrete structures - Products and systems for protection and repair - Test methods - Determination of compressive strength of repair mortar
TS EN 12190 Concrete structures - Products and systems for protection and repair - Test methods - Determination of compressive strength of repair mortar
TS EN 12192-1 Concrete structures - Determination of particle size distribution of products and systems for protection and repair - Part 1: Test method for dry components in premixed mortars
TS EN 12192-2 Concrete structures - Products and systems for protection and repair - Determination of particle size distribution - Part 2: Test method for fillers of polymeric adhesives
TS EN 12193 Lighting and light - Sports lighting
TS EN 12194 Indoor and outdoor louvers - Improper use - Test methods
TS EN 12208 Windows and doors - Waterproofing - Classification
TS 12225 Workplaces - Door or window systems made of rigid pvc - General rules
TS EN 12269-2 Determination of bonding behavior between reinforcing steel and aerated concrete - By beam test - Part 2: Long term test
TS EN 12269-2 Determination of bonding behavior between reinforcing steel and aerated concrete - By beam test - Part 2: Long term test
TS EN ISO 12241 Thermal insulation for building equipment and industrial installations - Calculation rules
TS EN ISO 12241 Thermal insulation for building equipment and industrial installations - Calculation rules
TS 5477 EN 12261 / A1 Gas meters - Turbine meters
TS EN 12269-1 Determination of bonding behavior between reinforcing steel and aerated concrete by "beam test" part 1: Short term test
TS EN 12269-1 Determination of bonding behavior between reinforcing steel and aerated concrete by "beam test" part 1: Short term test
TS EN 12279 Gas supply systems - Gas pressure regulating equipment on service lines - Functional specifications
TS EN 12279 / A1 Gas supply systems - Gas pressure regulating equipment on service lines - Functional features
TS EN 12310-1 Flexible waterproofing sheets - Part 1: Bitumen roof waterproofing sheets - Determination of tear resistance (with nails)
TS EN 12311-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of tensile properties
TS EN 12316-1 Flexible waterproofing boards - Part 1: Bitumen roof waterproofing boards - Determination of the separation resistance of the joint
TS EN 12316-2 Flexible sheets for waterproofing - Determination of the peel strength of adherent joints - Part 2: Plastic and rubber sheets for roof sealing
TS EN 12317-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of shear strength of joints
TS EN 12317-2: 2010 Flexible sheets for waterproofing - Determination of shear strength of bonded joints - Part 2: Plastic and rubber sheets for roof sealing
tst EN 12336 + A1 Tunnel boring machines - Protective sheet, horizontal boring machines and cladding equipment - Safety regulations
tst 12349 Corrugated sheets and special parts - Organic fiber - Bituminous - Used in waterproofing under tiles
tst 12349 Corrugated sheets and special parts - Organic fiber - Bituminous - Used in waterproofing under tiles
TS EN 12350-10 Concrete - Fresh concrete tests - Part 10: Self compacting concrete - L box test
TS EN 12350-10: 2010 Fresh concrete tests section 10: Self-compacting concrete- Sinking-L box test
TS EN 12350-12: 2010 Fresh concrete tests section 12: Self-compacting concrete- Sinking-J ring test
TS EN 12350-4 Concrete - Fresh concrete tests - Part 4: Degree of compressibility
TS EN 12350-5 Concrete - Fresh concrete tests - Part 5: Spreading table test
TS EN 12354-6 Building acoustics -Calculation of acoustic performance of structures from the performance of elements - Part 6: Sound absorption in confined spaces
TS EN 12354-3 Building acoustics - Calculation of the acoustic performance of buildings from the performance of the elements - Part 3: Insulation of outside airborne sound
TS EN 12354-5 Building acoustics - Calculation of acoustic performance of structures from the performance of elements - Part 5: Sound levels from service equipment
TS EN 12354-5 / AC: 2010 Building acoustics - Calculation of the acoustic performance of structures from the performance of elements - Part 5: Sound levels from service equipment
TS EN 12365-1 Building hardware - Seals and sealing seals for doors, windows, shutters and curtain walls - Part: 1 performance rules and classification
TS EN 12370 Natural stones - Test methods - Determination of resistance to salt crystallization
TS EN 12371 Natural stones - Test methods - Determination of resistance to frost
TS EN 12372 Natural stones - Test methods - Determination of bending strength under heavy load
tst EN 12380 Air intake valves for drainage systems - Rules, test methods and conformity assessment
TS EN 12380 Air intake valves for drainage systems - Rules, test methods and conformity assessment
TS EN 12390-3 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 12390-7 Concrete - Hardened concrete tests - Part 7: Determination of hardened concrete density
TS EN 12390-8 Concrete - Hardened concrete tests - part 8: Determination of the depth of water treatment under pressure
TS EN 12390-2 Concrete - Hardened concrete tests - Part 2: Preparation and curing of test specimens to be used in strength tests
TS EN 12390-6 / tstAC Concrete - Hardened concrete tests - Part 6: Determination of tensile strength of test specimens in splitting
TS EN 12390-3 / tst AC: 2011 Concrete - Hardened concrete tests - Part 3: Determination of compressive strength of test specimens
TS EN 12400 Windows and doors suitable for pedestrians - Mechanical durability - Features and classification
TS EN 12424 Doors - Used in industrial and commercial buildings and garages - Resistance to wind load - Classification
TS EN 12424 Doors - Used in industrial and commercial buildings and garages - Resistance to wind load - Classification
TS EN 12425 Doors - Used in industrial and commercial buildings and garages - Resistance to water penetration - Classification
TS EN 12425 Doors - Used in industrial and commercial buildings and garages - Resistance to water penetration - Classification
TS EN 12426 Doors - Used in industrial and commercial buildings and garages - Air permeability - Classification
TS EN 12426 Doors - Used in industrial and commercial buildings and garages - Air permeability - Classification
TS EN 12427 Doors - Used in industrial and commercial buildings and garages - Air permeability - Test method
TS EN 12427 Doors - Used in industrial and commercial buildings and garages - Air permeability - Test method
TS EN 12433-1 Doors - Industrial and commercial buildings and garages - Terms and descriptions - Part 1: Door types
TS EN 12440 Natural stones - Naming criteria
TS EN 12445 Doors and gates - Used in industrial and commercial areas and in garages - Safety of use of powered doors - Test methods
TS EN 12446: 2011 Chimneys - Components - Concrete wall elements
TS EN 12453 Doors and gates - Used in industrial and commercial spaces and garages - Safety of the use of power operated doors - RulesTS EN 12502-1 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Section 1: General
TS EN 12502-4 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 4: Factors affecting stainless steels
TS EN 12502-2 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 2: Factors affecting copper and copper alloys
TS EN 12502-3 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 3: Factors affecting hot-dip galvanized iron-based materials
TS EN 12502-5 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 5: Factors affecting cast iron, unalloyed and low alloy steels
TS EN 12504-1 Concrete - Concrete tests in building - Part 1: Core samples - Core drilling, inspection and determination of compressive strength
TS EN 12512 Wooden structures-Test methods-Cyclic loading test for joints made with mechanical fasteners
TS 12514 Combined heating devices "combi" gas-fired, with atmospheric burner -Regulation heat power does not exceed 70 kw-Mounting rules
TS 12514 Combined heating devices "combi" gas-fired, with atmospheric burner -Regulation heat power does not exceed 70 kw-Mounting rules
TS EN 12519 Windows and pedestrian doors - terms and descriptions
TS EN 12524 Building materials and products - Hydroisilicate properties - Scheduled design values
TS EN 12541 Plumbing - Pressurized toilet bowl valves and automatic urinal valves pn
TS EN ISO 12567-2 Thermal performance of windows and doors - Determination of thermal conductivity by hot box method - Part 2: Roof windows and other protruding windows "
TS EN ISO 12567-2 Thermal performance of windows and doors - Determination of thermal conductivity by hot box method - Part 2: Roof windows and other protruding windows "
Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 12567: Complete windows and doors
Thermal performance of windows and doors - Determination of thermal permeability by hot cell method - Part 12567: Complete windows and doors
TS EN ISO 12570 Hygiene performance of building materials and products - Determination of moisture content by drying at high temperature
tst 12576 Urban roads - Design rules for structural measures and markings on the streets, streets, squares and roads for the disabled and elderly
TS EN 12589 Ventilation of buildings-Air terminal units aerodynamic experiments and the ratio of fixed and variable speed terminal units
TSE ISO / TR 12603 Construction machinery and equipment-Classification
TS EN 12604 Doors - used in industrial and commercial buildings and garages - mechanical aspects - Requirements
TS 12613 Space requirement in public buildings - Administrative buildings - General rules
TS EN 12614 Concrete structures - Products and systems for protection and repair - Test methods - Determination of glass transition temperature in polymers
TS EN 12615 Concrete structures - Products and systems for protection and repair - Test methods - Determination of shear strength in joining tendency
TS EN 12617-3 Concrete structures - Test methods for products and systems for protection and repair - Part 3: Determination of linear shrinkage of structural bonding materials shortly after application
TS EN 12617-1 Concrete structures - Products and systems for protection and repair - Test methods - Part 1: Determination of linear shrinkage for surface protection systems (sps) and polymers
TS EN 12618-1 Concrete structures - Products and systems for protection and repair - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility
TS EN 12629-3 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 3: Sliding and rotary table machines
TS EN 12629-1: 2000 + A1: 2010 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 1: General requirements
TS EN 12629-4: 2001 + A1: 2010 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 4: Machines for producing concrete tiles
TS EN 12629-5-2 + A1: 2010 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 5-2: Horizontal axis tube manufacturing machines
TS EN 12629-5-4 + A1: 2010 Machinery for the manufacture of building materials of concrete and calcium silicate - Safety - Part 5-4: Concrete pipe coating machines
TS EN 12629-8: 2002 + A1: 2010 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 8: Machinery and equipment for building construction materials from calcium silicate (and concrete)
TS EN 12629-8 + A1 Machinery for the manufacture of building materials from concrete and calcium silicate - Safety - Part 8: Machinery and equipment for the manufacture of building materials from calcium silicate (and concrete)
TS EN 12636 Concrete structures - Products and systems for protection and repair - Test methods - Determination of adherence of concrete to concrete
TS EN 12637-3 Concrete structures - Products and systems for protection and repair - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers
TS EN 12666-1: 2005 + A1: 2011 Plastic pipe systems for non-pressurized groundwater and drainage - Polyethylene (pe) - Part 1: Specification for pipes, fittings and system
TS EN 12667 Thermal performance of building materials and products-Determination of thermal resistance by enclosed hot plate and heat flow meter methods-High and medium heat resistant products
TS EN 12667 Thermal performance of building materials and products-Determination of thermal resistance by enclosed hot plate and heat flow meter methods-High and medium heat resistant products
TS CR 12695 Metal chimneys - Corrosion resistance properties and test methods
TS EN 12706 Adhesives - Test methods for hydraulic adjustment, flattening and / or leveling compounds - Flow determination
TS 12737 Space requirement in public buildings - Social buildings - General rules
TS EN 12737 + A1 Precast concrete products - flooring plates for livestock
TS EN 12763 Pipe and fittings - Manufactured with fiber cement - Used in building waste water discharge systems - Dimensions and technical specifications used in shipment
tst EN 12764 + A1 Sanitary wares - Technical specifications for whirlpools
TS EN 12781 Wall coverings - Required properties of oak cork boards
TS EN 12792 Ventilation for buildings - Symbols, terminology and graphic symbols
TS EN 12794 + A1 Precast concrete products - Foundation piles
TS EN 12808-2 Joint fillers - For tiles - Part 2: Determination of abrasion resistance
TS EN 12808-1 Joint fillers - For tiles - Part 1: Determination of the chemical resistance of reaction resin mortars
TS EN 12808-5 Joint fillers - For tiles - Part 5: Determination of water absorption
TS EN 12808-3 Joint fillers - For tiles - Part 3: Determination of flexural and compressive strength
TS EN 12809 Boilers - For floor heating in residential buildings - Detached, solid fuel, rated heat output up to 50 kw - Specifications and test methods
TS EN 12809 / AC Boilers - Residential, individual, solid fuel for floor heating - Rated heat output up to 50 kw - Features and test methods
TS EN 12809 / A1 / AC Boilers - Residential, solid fuel for individual, floor heating - Rated heat output up to 50 kw - Specifications and test methods
TS EN 12810-2 Facade scaffolding consisting of pre-fabricated components - Part 2: Special structural design methods
TS EN 12811-1 Temporary work equipment - Part 1: Scaffolding - Performance requirements and overall design
TS EN 12811-2 Temporary work equipment - Part 2: Material information
TS EN 12812 Scaffolding - Performance requirements and overall design
TS 12813 Space requirements in public buildings - Health buildings - General rules
TS EN 12813 Temporary work equipment - Load-bearing towers of pre-fabricated components - Special structural design methods
TS EN 12825 Raised floor systems
TS EN 12831 Heating systems for buildings - Method for calculation and design of heat load
TS EN 12835 Airtight shutters - Air permeability test
TS EN 12843 Precast concrete products - Poles and columns
TS EN 12846-2: 2011 Bitumens and bituminous binders-Determination of flow time of bitumen emulsions with flow viscometer-Part 2 - Floor-Bek and thinned bitumen binders
TS EN 12847 Bitumens and bituminous binders - Determination of precipitation tendencies of bitumen emulsions
TS EN 12848 Bitumen and bituminous binders - determination of the stability of bitumen emulsions with cement
TS EN 12849 Bitumen and bituminous binders - Determination of penetration power of bitumen emulsions "
TS 451 EN 12859 / tst A1 Gypsum blocks - Definitions, properties and tests and test methods
TS 451 EN 12859 / tst A1 Gypsum blocks - Definitions, properties and tests and test methods
TS 12860 Space requirement in public buildings - Educational buildings - General rules
TS 12867 Landscape Architecture - Design Services - Rules
TS EN 12898 Glass - Used in buildings - Determination of spreading coefficient
TS 12911 social service organizations - Orphanages - General rules
TS EN ISO 12944-1 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 1: General information
TS EN ISO 12944-2 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 2: Classification of the environment
TS EN ISO 12944-4 Paints and varnishes - Corrosion protection of steel structures with protective paint systems - Part 4: Surface types and surface preparation
TS EN ISO 12944-7 Paints and varnishes - Corrosion protection of steel structures with protective paint systems section 7: Application and inspection of painting processes
TS EN 12956 Wall coverings - In rolls - Determination of size, edge flatness, wipability and washability
TS EN 12978 + A1 Doors and gates - Safety devices for power-operated gates and entrances used in industrial and commercial spaces and garages - Rules and test methods
TS 12988 Businesses - Plumbing supplies sales and service places - General rules
TS 12988 / T1 Businesses-Plumbing materials sales and service places-General rules amended
TS 13007 Public buildings-Hardware requirements-Terms and recipes
TS EN 13009 Hygothermal performance of construction materials - Determination of hygric expansion coefficient
TS EN 13015 + A1 Maintenance of lifts and escalators - Rules for maintenance instructions
TS EN 13030 Ventilation in buildings-End elements- Performance test of ventilation ducts in simulated rain environment
TS EN 13032-3 Light and lighting - Measurement and presentation of photometric data for lamps and luminaires - Part 3: Presentation of data for emergency lighting of workplaces
TS 13041 Public buildings-Hardware requirements-Social buildings-Rules
TS 13042 Public buildings-Hardware requirements-Administrative buildings-Rules
TS EN 13049 Windows - Light and severe mass impact - Test method, safety rules and classification
TS EN 13050: 2011 Façade - Water tightness - Laboratory test under dynamic air pressure and water spray effect
TS EN 13053: 2006 + A1: 2011 (EN) Ventilation of buildings-Air transport units-Performance and proportions of units, components and parts
TS EN 13062 Concrete structures - Products and systems for protection and repair - Test method - Determination of water repulsion of products for protection of reinforcement
TS EN 13063-2 + A1 Chimneys - Chimneys with clay / ceramic fume lining system - part 2: Rules and test methods applied in wet conditions
TS EN 13069 Chimneys - System chimneys with clay / ceramic outer walls - rules and test methods
TS EN 13074-2: 2011 Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation - Part 1: Stabilization after recovery by evaporation
TS EN 13074-1: 2011 Bitumen and bituminous binders - Recovery of binders from bitumen emulsions by evaporation - Part 1: Recovery by evaporation
TS EN 13078 Preventing contamination from drinking water backflow - Immersion supply air gap with flood sluice and air intake - Group a, type c
tst EN 13079 Preventing contamination from back-escape of potable water-Air gap with injector-Class a- Type d
TS EN 13084-4 Chimneys-Free-standing-Section 4: Brick lining - Design and application
TS EN 13084-5 Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
TS EN 13084-5 Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
TS EN 13084-8 Industrial chimneys - Free standing - Part 8: Chimney system suspended on a supporting structure - Design and application
TS EN 13084-2 Chimneys - Free standing - Part 2: Concrete chimneys
TS EN 13084-4 / AC Chimneys - Free standing - Part 4: Brick lining - Design and application
Industrial chimneys - Free standing - Section 13084: General features
TS EN 13084-1 Chimneys - Free standing - Part 1: General rules
TS EN 13090 Gas pipe fitting - Seals for screw connections
TS EN 13111 Flexible sheets for waterproofing - Supports for parted roof and wall coverings - Determination of resistance to water penetration
TS EN 13116 Curtain walls - Wind load resistance - Performance requirements
TS EN 13123-2 Windows, doors and shutters - Explosion resistance - Necessary specifications and classification - Part 2: Classification test
TS EN 13124-2 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Classification test
TS EN 13126-8 Building hardware - Requirements and test methods for windows and glazed exterior doors - Part 8: Tilt and turn, first tilt and only rotating hardware
TS EN 13126-6 Building hardware - Connection of windows and glazed doors - Features and test methods section 6: Variable geometry of friction or friction hinges
TS EN 13126-12 Building hardware - Connection of windows and glazed doors - Features and test methods section 12: Reversible hinged window
TS EN 13126-11 Building hardware - Connection of windows and glazed doors - Features and test methods section 11: Top hinged window that can be reversed by protrusion
TS EN 13126-10 Building hardware - Connection of windows and glazed doors - Features and test methods section 10: Arm balancing systems
TS EN 13141-1 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 1: external and internally mounted air transfer system "
TS EN 13141-3 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 3: aspirators for domestic use "
TS EN 13141-5 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 5: hoods and roof outlet terminal unit "
TS EN 13141-10 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 10: Humidity controlled filtered air end elements
TS EN 13141-9 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 9: Externally installed moisture controlled air conduction elements
TS EN 13141-10 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 10: Humidity controlled filtered air end elements
TS EN 13141-9 Ventilation in buildings - Performance tests of components / products for residential ventilation - Part 9: Externally installed moisture controlled air conduction elements
tst EN 13167 Thermal insulation products - Used in buildings - Factory made glass wool products -
TS EN 13182 + AC Ventilation of buildings - Device features for measuring air velocity in ventilating volume
TS EN 13198 Precast concrete products - Urban furniture and garden products
TS EN 13200-1 Tribunes - Section 1: Placement criteria, characteristics for the viewing area of the spectators
TS EN 13200-3 Tribunes - Part 3: Separation elements - Requirements
TS EN 13203-1 Gas-fired devices-Indoor-Hot water-producing devices 300litre water storage capacity and heat input 70kw'me devices section 1hot water outlet
TS EN 13213 Low floors
TS EN 13216-1 Chimneys - Test methods for system chimneys - Part 1: General test methods
TS EN 13263-2 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria
TS EN 13263-1 + A1 Silica fume - Used in concrete - Part 1: Definitions, requirements and eligibility criteria
TS 13272 Standard application for sampling of materials according to probability principle
TS EN 13279-1 Construction and plaster gypsum - Part 1: Definitions and requirements
TS EN 13294 Concrete structures-Products and systems for protection and repair-Test methods-Determination of solidification time
TS EN 13301 Bitumen and bituminous binders - Determination of the tendency of bitumen to stain
TS EN 13302 Bitumen and bituminous binders - Determination of the dynamic viscosity of bituminous binders using a rotary tube
TS EN 13303 Bitumens and bituminous binders - Determination of mass loss of industrial bitumen by heating
TS EN 13304 Bitumen and bituminous binders - Basic properties of oxidized bitumen
TS EN 13305 Bitumen and bituminous binders - Basic properties of hard bitumen used in industry
TS 13317 Portable and stationary liquefied petroleum gas (LPG) cylinders used in forklifts, filling rules and safety regulations for use
TS EN 13358: 2010 Bitumen and bituminous binders - Determination of distillation properties of mineral powder and bitumen binders made of mineral powder "
TS 13362 Hemodialysis centers - General rules
TS EN 13363-2 Solar protection in combination with window glass - calculation of total solar permeability - Part 2: detailed calculation method "
TS EN 13363-1 + A1 Sun protection devices with single reflector - Calculation of passing sunlight and other light - Part 1: Simplified method
TS EN 13363-1 + A1 / AC Sun protection devices integrated in glass - Calculation of sun and light transmission - Part 1: Simplified method
TS EN 13363-2 / AC Solar protection in combination with window glass - Calculation of total solar permeability - Part 2: Detailed calculation method
TS EN ISO 13370 Thermal performance -Floor heat exchange calculation method
TS EN 13373 Natural stones - Test methods - Determination of geometric properties of natural stone products
TS EN 13375 Flexible sheets for waterproofing - Waterproofing systems for concrete bridge decks and other concrete pavements open to traffic - Rules for sampling and test sample preparation
TS EN 13384-3 Chimneys - Thermal and fluid dynamic calculation method - Part 3: Method for creating diagrams and charts for chimneys serving a heating device
TS EN 13391 Mechanical tests for post-tensioning systems
TS 13392 Authorized services - Rules for shower enclosures
TS EN 13395-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 2: Determination of spreading in slurry or mortar
TS EN 13395-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of workability - Part 2: Determination of spreading in slurry or mortar
TS EN 13396 Concrete structures - Products and systems for protection and repair - Test methods - Chloride ion input measurement
TS EN 13398 Bitumen and bituminous binders - Determination of elasticity of treated bitumen
TS EN 13410 / AC Radiant heaters - Gas burning - Hanging on the ceiling - Ventilation rules for non-residential buildings
TS 13420 Ceramic sanitary ware with antibacterial surface properties - Test methods and properties
TS EN 13420: 2011 Windows- Behavior in different climates-Test method
EN 13443-1: 2002 / prA1 -
TS EN 13454-1 Binders, composite binders and factory made mixtures for calcium sulphate based screed materials - part 1: Definitions and characteristics
TS EN 13454-1 Binders, composite binders and factory made mixtures for calcium sulphate based screed materials - part 1: Definitions and characteristics
TS EN 13454-2 + A1 Binders, composite binders and ready mixes - Calcium sulfate based - For use on floor screeds - Part 2: Test methods
TS EN 13454-2 + A1 Binders, composite binders and ready mixes - Calcium sulfate based - For use on floor screeds - Part 2: Test methods
TS EN 13465 Ventilation for buildings - Calculation methods for determination of air flow in residential buildings
TS EN 13467 Thermal insulation products for industrial plants and building equipment-Determination of dimensions, deflection and linearity of preformed thermal insulation products in tubular form
TS EN 13468 Thermal insulation products for industrial plants and building equipment Determination of water soluble trace concentrations of chloride, fluoride, silicate and sodium ions and ph
TS EN 13471 Thermal insulation materials for industrial plants and building equipment Determination of coefficient of thermal expansion
TS EN 13497 Thermal insulation materials - Used in buildings - External composite thermal insulation systems (etıcs) - Determination of impact resistance
TS EN 13499 Thermal insulation materials - Used in buildings - Expanded polystyrene based external composite thermal insulation systems (etıcs) - Specifications
TS EN 13527 Shutters and shutters- Test methods- Working force measurement
TS ISO 13543 Copper, lead and zinc sulphide concentrates - Calculation of metal mass in batch
TS ISO 13543 Copper, lead and zinc sulphide concentrates - Calculation of metal mass in batch
TS EN 13564-1 Flood protection devices - Used in buildings - Part 1: Rules
TS EN 13564-3 Flood protection devices - Used in buildings - Part 3: Quality assurance
TS EN 13577 Concrete - Chemical effects - Determination of harmful carbon dioxide in water
TS EN 13578 Concrete structures - Products and systems for protection and repair - Test method - Compatibility with fresh concrete
TS EN 13580 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water absorption and resistance to alkalis for hydrophobic impregnations
TS EN 13581 Concrete structures - Products and systems for protection and repair - Test methods - Determination of mass loss after freeze thawing of hydrophobic impregnated and sliced concrete under salt pressure
TS EN 13581 Concrete structures - Products and systems for protection and repair - Test methods - Determination of mass loss after freeze thawing of hydrophobic impregnated and sliced concrete under salt pressure
TS EN 13584 Concrete constructions - Products and systems for protection and repair - Test methods - Determination of the compression of repair products under pressure
TS EN 13588 Bitumen and bituminous binders - Determination of cohesion of bituminous binders - By pendulum test
TS EN 13589 Bitumen and bituminous binders - Determination of tensile properties of treated bitumen by ductilometry
TS EN 13632 Bitumen and bituminous binders - Visual determination of polymer dispersion in polymer modified bitumen
TS EN 13639 / AC Limestone - Determination of total organic carbon
TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster
TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster
TS EN 13670 Construction of concrete structures
TS EN 13687-5 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock
TS EN 13687-1 Concrete structures - Products and systems for protection and repair - Test methods - Determination of thermal compatibility - Part 1: Freezing immersed in de-icing salt solution - Thawing cycles
TS EN 13693 + A1 Precast concrete products - Special roof elements
TS EN 13702 Bitumen and bituminous binders - Determination of dynamic viscosity in modified bitumen by cone and plate method
TS EN 13703 Bitumen and bituminous binders - Determination of deformation energy
TS EN 13747 + A2 Precast concrete products - Slab plates for laying systems
TS 213-1 EN 13748-1 Terrazo tiles - For indoor use
TS 213-2 EN 13748-2 / T1 Terrazo tiles - For outdoor use
TS EN ISO 13786 Thermal performance of building components - Dynamic thermal properties - Calculation methods
TS EN ISO 13786 Thermal performance of building components - Dynamic thermal properties - Calculation methods
TS EN ISO 13788 Thermal performance of building components and building elements in humid environment - Internal surface temperature to prevent critical surface moisture and condensation inside building components - Calculation methods
TS EN 13791 Determination of compressive strength of structures and precast concrete components in situ
TS EN 13814 Machines and structures used in amusement parks and playgrounds - Security
TS EN 13815 Fiber reinforced prefabricated gypsum products - Definitions, requirements and test methods
TS EN 13820 Insulation products - Used in buildings - Determination of organic content
TSE CEN / TR 13833 Competence of construction contractors
TS EN 13888 Joint filler for tiles - Requirements, conformity assessment, classification and demonstration
TS EN 13892-6 Screed materials - Test methods - Part 6: Determination of surface hardness
TS EN 13892-8 Screed materials - Test methods - Part 8: Determination of bond strength
TS EN 13892-5 Screed materials - Test methods - Part 5: Determination of abrasion resistance of screed material used as wear layer against rotating wheel
TS EN 13894-2 Concrete structures - Products and systems for protection and repair - Test methods - Determination of fatigue under dynamic loads - Part 2: After hardening
TS EN 13897 Flexible sheets - For waterproofing - Bitumen, plastic and rubber sheets for roof insulation - Determination of water tightness after stretching at low temperature
TS EN 13915 Gypsum boards - Prefabricated - Hollow coreboard panels - Definitions, requirements and test methods
TS EN 13948 Waterproofing-Flexible sheets-Bitumen, plastic and rubber sheets used in waterproofing of roofs- Determination of resistance to penetration of plant roots
TS EN 13978-1 Precast concrete products - Precast concrete garages - Part 1: Requirements for single-piece or monolithic reinforced concrete garages
TS EN 13978-1 Precast concrete products - Precast concrete garages - Part 1: Requirements for single-piece or monolithic reinforced concrete garages
TS EN 14016-2 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods
TS EN 14016-1 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions and specifications
TS EN 14063-1 Thermal insulation materials and products - On-site thermal insulation of expanded lightweight aggregate (lwa) - Part 1: Pre-placement properties of loose-filled materials
TS EN 14063-1 / AC Thermal insulation materials and products - On-site thermal insulation of expanded clay lightweight aggregate (lwa) - Part 1: Pre-placement properties of loose-filled materials
TS EN 14064-1 Thermal insulation products for buildings - On-site thermal insulation of loose textured mineral wool (mw) products - Part 1: Pre-placement properties of loose-filled materials
TS EN 14064-2 Thermal insulation products for buildings - On-site thermal insulation of loose textured mineral wool (mw) products - Part 1: Properties of installed materials
TS EN 14068 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water tightness of injection filled cracks
TS EN 14068 Concrete structures - Products and systems for protection and repair - Test methods - Determination of water tightness of injection filled cracks
TS EN 14095 Water conditioning equipment inside buildings - Aluminum anode electrolytic treatment systems - Performance, safety and test conditions
TS EN 14124 Inlet valves - For float reservoirs
TS EN 14134 Ventilation in buildings - Performance tests and installation controls of residential ventilation systems
TS EN 14146 Natural stone test methods - Determination of dynamic elastic modulus (by measuring the basic resonance frequency)
TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor deposition
TS EN 14157 Natural stone - Determination of abrasion resistance
TS EN 14158 Natural stone test methods - Determination of breaking energy
TS EN 14188-3 Joints and gaskets - Part 3: Specifications
TS EN 14201 Blinds and shutters - Resistance to repeated operations (mechanical strength) - Test methods "
TS EN 14202 Blinds and shutters - Suitable for use with tubular and square motor vehicles - Rules and test methods
TS EN 14203 Blinds and roller shutters - Availability of gearboxes with swivel arm - Rules and test methods "
TS EN 14205 Natural stone test methods - Determination of knoop hardness
TS EN 14209 Preformed gypsum board angle - Definitions, requirements and test methods
TS EN 14220 Wood and wood based materials used in exterior windows, exterior door casings and exterior door frames - Requirements and features
TS EN 14221 Wood and wood-based materials used in interior windows, interior door casings and interior door frames - Requirements and features
TS EN 14224 Flexible sheets for waterproofing - Waterproofing of concrete bridge tops and other concrete surfaces exposed to vehicle traffic - Determination of crack covering
tst EN 14277 Ventilation of buildings - Air terminal devices - Air flow measuring method with calibrated sensors in or near ATD boxes
TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment
TS EN 14236 Ultrasonic household gas meters
TS EN 14239 Ventilation of buildings - Duct - Measurement of duct surface area
TS EN 14240 Ventilation in buildings - Refrigerated ceilings - Tests and ratings "
TS EN 14246 Gypsum elements - Used in suspended ceilings - Definitions, requirements and test methods
TS EN 14246 Gypsum elements - Used in suspended ceilings - Definitions, requirements and test methods
TS EN 14250 Wooden structures - Prefabricated structural structural elements combined with riveted metal plates - Product requirements
TS EN 14277 Ventilation-for-buildings-Air transport devices-Measurement of air flow with calibrated sensors close to or inside the ATD / pressure chambers
TS EN 14297 Chimneys - Freeze-thaw test for determination of durability of chimney products
tst EN 14304 Thermal insulation products for plumbing and industrial applications - Factory made flexible elastomeric foam (fef) products - Specifications
TS EN 14316-1 Thermal insulation materials - For buildings - On-site thermal insulation from expanded perlite (ep) - Part 1: Pre-placement properties of bonded and loose-filled materials
TS EN 14316-2 Thermal insulation materials for buildings - On-site thermal insulation from expanded perlite (ep) - Part 2: Installed product specifications
TS EN 14317-1 Thermal insulation products - Thermal insulation products used in buildings - Thermal insulation applied at the place of use with scaly vermiculite (pv) products - Part 1: Properties of bonded and loose-filled products prior to installation
TS EN 14317-2 Thermal insulation materials for buildings - Thermally insulated vermiculite products - Part 2: Specification for installed products
TS EN 14336 Heating systems - for buildings - Installation and commissioning of water-based heating systems
TS EN 14337 Heating systems for buildings Design and installation of direct electric room heating systems
TS EN 14346 Characterization of wastes - Determination of dry matter or water content and determination of amount of dry matter
TS EN 14353 + A1 Metal bearings and connection profiles - Used in combination with gypsum boards - Definitions, requirements and test methods
TS EN 14366 Laboratory measurement of noise from wastewater plants "
TS EN 14367 Prevents uncontrollable backflow with different pressure zones - Family c, type a
TS EN 14374 Timber constructions - Structural laminated timber with peeling layer - Requirements
TS EN 14383-1 Crime prevention - City planning and building design - Part 1: Definitions of specific terms
TS EN 14437 Determination of the uplift resistance of clay or concrete roof tiles placed on the roof - Roof system test method
TS EN 14474 Precast concrete products - Concrete using wood chips as agraga - Required properties and test methods
TS EN 14487-1 Shotcrete - Part 1: Definitions, specifications and suitability
TS EN 14487-2 Shotcrete - Part 2: Application
TS EN 14488-1 Shotcrete - Tests - Sampling from fresh and hardened concrete
TS EN 14488-2 Shotcrete - Tests - Part 2: Compressive strength of new (young) shotcrete
TS EN 14488-3 Shotcrete - Tests - Part 3: Flexural strength of fiber reinforced beam specimens (initial crack, final and residual bending strengths)
TS EN 14488-5 Shotcrete - Tests - Part 5: Determination of energy absorption capacity in fiber-reinforced plate samples
TS EN 14488-6 Shotcrete - Tests - Part 6: Thickness of concrete on the base
TS EN 14488-7 Shotcrete - Tests - Part 7: Fiber content in fiber-reinforced concrete
TS EN 14496 Gypsum based binders - Composite sheets and gypsum sheets for heat / sound insulation - Definitions, requirements and test methods
TS EN 14496 Gypsum based binders - Composite sheets and gypsum sheets for heat / sound insulation - Definitions, requirements and test methods
TS EN 14496 Gypsum based binders - Composite sheets and gypsum sheets for heat / sound insulation - Definitions, requirements and test methods
TS EN 14497 / AC Concrete structures - Products and systems for protection and repair - Test method - Determination of filtration stability stability
TS EN 14500 Shutters and shutters - Thermal and visual comfort - Test and calculation methods
TS EN 14501 Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification "
TS EN 14518 Ventilation in buildings - Chilled beams - Tests and grading of cooled passive beams
TS EN 14575 Geosynthetic barriers - Test methods - Determination test method for determination of resistance to oxidation
TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression
TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus
TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient
TS EN 14600 Door systems and windows with fire resistance and / or smoke control characteristics - Rules and classification "
TS EN 14608 Windows - Determination of resistance to sag force
TS EN 14609 Windows - Determination of resistance to static torsion
TS EN 14617-1 Agglomerated stones - Test methods - Part 1: Determination of apparent density and water absorption
TS EN 14617-9 Agglomerated stones - Test methods - Part 9: Determination of impact resistance
TS EN 14617-11 Agglomerates - Test methods - Part 11: Determination of the coefficient of linear thermal expansion
TS EN 14617-15 Agglomerates - Test methods - Part 15: Determination of compressive strength
TS EN 14617-13 Agglomerated stones - Test methods - Part 13: Determination of electrical resistance
TS EN 14617-16 Agglomerates - Test methods - Part 16: Determination of dimensions, geometric properties and surface quality of modular tiles
TS EN 14617-8 Agglomerated stones - Test methods - Part 8: Determination of resistance to fixation (with dowels)
TS EN 14623 Apparatus used to prevent contamination by backflow in potable water - Air gaps with minimum return flow (verified by measurement and test) - Family a, type g
TS EN 14629 Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete
TS EN 14637 Building equipment - Electrically controlled open holding systems for fire / smoke doors - Features, test methods, application and maintenance
TS EN 14637 Building equipment - Electrically controlled open holding systems for fire / smoke doors - Features, test methods, application and maintenance
TS EN 14647 Calcium aluminate cement - Composition, properties and conformity criteria
TS EN 14649 Precast concrete products - Test method - Determination of the strength of cement and glass fiber in concrete (hot test)
TS EN 14650 Precast concrete products - General rules for factory production control of metal fiber concrete
TS EN 14651 + A1 Metal fiber concrete - Test method - Determination of tensile strength at bending (loc limit, residual)
TS EN ISO 14683 Building construction-Thermal bridges-Linear thermal permeability-Simplified method and error-free values
TS EN 14637 Building equipment - Electrically controlled open holding systems for fire / smoke doors - Features, test methods, application and maintenance
TS EN 14637 Building equipment - Electrically controlled open holding systems for fire / smoke doors - Features, test methods, application and maintenance
TS EN 14647 Calcium aluminate cement - Composition, properties and conformity criteria
TS EN 14649 Precast concrete products - Test method - Determination of the strength of cement and glass fiber in concrete (hot test)
TS EN 14650 Precast concrete products - General rules for factory production control of metal fiber concrete
TS EN 14651 + A1 Metal fiber concrete - Test method - Determination of tensile strength at bending (loc limit, residual)
TS EN ISO 14683 Building construction-Thermal bridges-Linear thermal permeability-Simplified method and error-free values
TSE ISO / TR 14697 Fire tests - Guidance on selection of substrate for construction products
TS EN ISO 14713-2 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 2: Hot dip galvanizing
TS EN ISO 14713-3 Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TS EN ISO 14713-3 / AC Zinc coatings - Guidelines and recommendations for the protection of iron and steel against corrosion in buildings - Part 3: Powder zinc coating
TS EN 14721 + A1 Metal fiber concrete - Test method - Measurement of fiber content in fresh and hardened concrete
TS EN 14743 + A1 Water conditioning equipment used in buildings - Softeners - Performance, safety and test rules
TS EN 14759 Louvers - Acoustic insulation according to airborne sound - demonstrating performance "
TS EN 14759 Louvers - Acoustic insulation according to airborne sound - demonstrating performance "
TS EN 14782 Self-supporting sheet metal for roofs, outer claddings and interior linings
TS EN 14782 Self-supporting sheet metal for roofs, outer claddings and interior linings
TSE CEN TR 14788: 2006 Ventilation in buildings - Design and dimensioning of residential ventilation systems
TS EN 14845-1 Fibers - Used in concrete - Test methods - Part 1: Blank concretes
TS EN 14846 Building equipment - Locks and latches - Electromechanical locks and striking plates - Rules and test methods
TS EN 14889-1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and suitability
TS EN 14889-2 Fibers - For use in concrete - Part 2: Polymer fibers - Definitions, specifications and compatibility
TSE CEN TR 14788: 2006 Ventilation in buildings - Design and dimensioning of residential ventilation systems
TS EN 14845-1 Fibers - Used in concrete - Test methods - Part 1: Blank concretes
TS EN 14846 Building equipment - Locks and latches - Electromechanical locks and striking plates - Rules and test methods
TS EN 14889-1 Fibers - For use in concrete - Part 1: Steel fibers - Definitions, specifications and suitability
TS EN 14889-2 Fibers - For use in concrete - Part 2: Polymer fibers - Definitions, specifications and compatibility
TS EN 14898 + A1 Indoor water conditioning equipment - Active material filters - Performance safety and test rules
TS EN 14908-5 Open data communication for building automation, controls and construction management - Control network protocol - Part 5: Application
TS EN 14908-6: 2010 Open data communication for building automation, controls and construction management - Control network protocol - Part 6: Application elements
TS EN 14944-3 The effect of cementitious products on human consumption waters - Test methods - Part 3: Release of substances from factory-made cementitious products
TS EN 14963 Roof coverings - Continuous roof skylights - Plastic - with or without skirt - Classification, requirements and test methods
TS EN 14964 Rigid substrates - for discontinuous roofing - recipes and specifications
TS EN 14967 Flexible sheets for waterproofing - Bituminous waterproofing sheets - Definitions and features
TS EN 14975 + A1 Ceiling stairs - Rules markings and tests
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-1 Chimneys - Rules and test methods for metal chimneys and material-independent sealed heating applications - Vertical air / smoke terminals for C6-type devices
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 14989-2 Chimneys - Rules and test methods for sealed chimneys and material-independent heating applications - Part 2: Pipes and air supply ducts for sealed applications
TS EN 14991 Precast concrete products - Basic elements
TS EN 15001-2 Gas systems - Gas piping for industrial installations larger than 0,5 bar and for industrial and other installations larger than 5 bar - Part 2: Detailed functional specifications for commissioning, operation and maintenance
TS EN 15026 Hygothermal performance of building components and building elements - Evaluation of moisture transfer by numerical simulation
TS EN 15027 + A1 Circular and bristle sawing machines - for construction sites, portable - Safety
TS EN 15035 Heating boilers-70 with special rules for the liquid fuel combustion chamber sealing unit up to kw
TS EN 15036-2 Test rules for airborne noise emissions from heating boilers - Heat generators section 2: Flue gas noise emissions at the output of heat generators
TS EN 15037-1 Precast concrete products - Gear laying systems - Part 1: Beams
TS EN 15037-2 + A1 Precast concrete products - Threaded laying systems - Part 2: Concrete blocks
TS EN 15037-3 + A1 Precast concrete products - Gear laying systems - Part 3: Clay blocks
TS EN 15057 Corrugated sheets - Manufactured using fiber-reinforced cement - Impact resistance test method
TS EN 15080-8 Extended application of the results of fire resistance tests - Part 8: Beams
TS EN 15092 Valves used in buildings - Inline hot water supply valves - Tests and rules
TS EN 15096 Devices to prevent pollution by drinking water backflow - Hose union anti-Vacuum valves - Dn 15 dn Family including H, type b and d 25 - General technical specifications
TS EN 15116 Ventilation in buildings - Chilled signals - Test and degree of active chilled beams
TS EN 15129 Anti - Seismic devices
TS EN 15161 Indoor water treatment - Installation, operation, maintenance and repair
TS EN 15167-1 Ground blast furnace slag - For use in concrete, mortar and grout - Part 1: Definitions, specifications and eligibility criteria
TS EN 15167-2 Ground blast furnace slag - For use in concrete, mortar and grout - Part 2: Conformity assessment
TSE CEN / TR 15177 Determination of freeze-thaw resistance of concrete - Structural internal damage
TS EN 15183 Concrete structures - Products and systems for protection and repair - Inspection methods - Corrosion protection test
TS EN 15184 Concrete structures - Products and systems for protection and repair - Inspection methods - Determination of adhesion of coated steel reinforcement to concrete by shear test
TS EN 15191 Precast concrete products - Classification of glass fiber reinforced concrete performance
TS EN 15200 Sanitary wares - Multifunctional shower enclosures
TS EN 15200 / AC Sanitary wares - Multifunctional shower enclosures
TS EN 15217 Energy performance - for buildings - Methods for expressing energy performance and energy certification for buildings
TS EN 15219 + A1 Indoor water supply - Nitrate removal - Requirements for performance, safety and testing
TS EN 15221-2 Facility management - part 2: Guidelines for the preparation of facility management agreements
TSE CEN / TR 15225 Masonry mortar - Designed - Guidance on factory production control for Ce marking (conformity verification system 2 +)
TS EN 15240 Ventilation - Guidelines for the inspection of energy performance air conditioning systems for buildings
tst EN 15241 Ventilation - Calculation method for energy loss from ventilation and filtration in commercial buildings for buildings
TS EN 15242 Calculation methods for determination of air flow in buildings (including filtering) for ventilation buildings
TS EN 15243 Room temperatures, load and energy calculation for buildings with ventilation room conditioning system for buildings
TS EN 15251 Indoor environment parameters for the design and evaluation of energy performance of buildings (indoor air quality, thermal environment, lighting and acoustics)
TS EN 15254-5 Comprehensive application of results from fire resistance tests - Non-bearing walls - Part 5: Metal sandwich panel construction
TS EN 15255 Energy performance - For buildings - Precision room cooling load calculation - General criteria and validation procedures
TS EN 15255 Energy performance - For buildings - Precision room cooling load calculation - General criteria and validation procedures
TS EN 15258 Precast concrete products - Retaining wall elements
TS EN 15265 Energy performance - For buildings - Calculation of the energy required for ambient heating and cooling using dynamic methods - General criteria and validation procedures
TS EN 15269-7 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, blinds and openable window fittings (including building components) - Part 7: Fire resistance for steel sliding door sets
TS EN 15269-20 Comprehensive application of the results obtained from fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including structural elements) - Part 20: Hinged and studded glazed doors with steel, timber and metal frames
TS EN 15269-1 Comprehensive application of the results of fire resistance and / or smoke control tests for doors, shutters and openable window fittings (including building components) - Part 1: General rules
TS EN 15283-2 + A1 Fiber reinforced gypsum boards - Definitions, requirements and test methods - Part 2: Gypsum boards reinforced with cellulosic fibers
TS EN 15285 Stacked stones - Modular tiles for floor and stair covering (internal and external)
TS EN 15287-1 + A1: 2010 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-chamber heating devices
TS EN 15316-4-7 Heating systems for buildings - Method for calculating system efficiency and energy requirements - Part 4-7: Space heat generation systems, biomass combustion systems
TS EN 15318 Design and implementation of gypsum blocks
TS EN 15319 General principles based on the design of fibrous plaster applications
TS EN 15326 + A1 Bitumen and bituminous binders-Determination of density and specific mass-Capillary cap pycnometer method
TS EN 15332 Boilers - Energy evaluation of hot water storage systems
TS EN 15368 + A1: 2010 Hydraulic connectors for non-structural applications - Definitions, specifications and conformity criteria
TS EN ISO 15877-5 Plastic pipe systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 5: suitability of the system for its purpose
TS EN 15900 Energy efficiency services - Terms and rules
TS EN ISO 15927-2 Hygothermal performance of buildings - Calculation and presentation of climate data - Part 2: Hourly data for the design of the cooling load
Hygothermal performance of buildings - Calculation and presentation of climate data - Part 15927: Calculation of wind-driven rain index from hourly wind and rain data for vertical surfaces
TS EN 16002 Flexible sheets for waterproofing - Determination of wind load resistance of mechanically screwed sheets for roof waterproofing
TS EN 15818: 2011 Polymer-modified bitumen thick covers for waterproofing - Determination of dimensional stability at high temperatures
TS EN ISO 15875-1 / A1 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 1: General -A1
TS EN ISO 15875-2 / A1 Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 2: Pipes - A1
TS EN 15780: 2011 Ventilation-duct network for buildings- Cleaning of ventilation systems
TS EN 15805 Air filters - For particle filtration in general ventilation - Standardized dimensions
TS EN 15848 Water treatment equipment inside buildings - Chemical dosing system - Features for performance, safety and testing
TS EN 15736 Wooden structures - Test methods - Tensile capacity of riveted metal plate fasteners used for the transport and assembly of prefabricated trusses
TS EN 15737 Wooden structures - Test methods - Torsional strength of screws during screwing
TSE CEN / TR 15739 Precast concrete products - Concrete surfaces - Description
TS EN 15720 Sanitaryware - Shower trays made of impact-resistant extruded abs / acrylic sheets - Specification and test methods
TS EN 15727 Ventilation in buildings - Ducts and duct network components, sealing classification and test
TS EN 15636 Sanitary installation - Impact modified extruded acrylic sheets used in shower trays - Properties and determination methods
TS EN ISO 15463 / AC Oil and gas industry-Field inspection of new casing pipes, production pipes and straight-ended drill pipes
TS EN 15644 Prefabricated solid wood staircase with traditional design - Features and requirements
TS EN 15650 Ventilation and fire dampers in buildings
TS EN 15657-1 Acoustic properties of buildings and building components - Laboratory measurements of airborne and structural noise of building equipment - Part 1: Simplified situations where swirl baths are sampled and equipment mobility is higher than receiver mobility
TS EN 15665 Ventilation in buildings - Determination of performance criteria for residential ventilation systems
TS EN 15715 Thermal insulation products - Installation and fixing instructions for reaction to fire test -Fabricated products
TS EN 15553 Petroleum products and related materials-Determination of hydrocarbon types-Fluorescence marker adsorption method
TS EN 15564 Precast concrete products - Resin bonded concrete - Requirements and test methods
TS EN 15600-2: 2010 Thermal insulation products for industrial insulation and building equipment-Thermal insulation for use with scaly vermiculite (pv) products - Part 2: Properties of laid-out materials
TS EN 15603 Energy performance of buildings - General energy use and description of energy values
TS EN 15423 Ventilation systems for buildings - Fire precautions for air distribution systems in buildings
TS EN 15435 Precast concrete products - Normal and lightweight concrete curtain blocks - Product characteristics and performance
TS EN 15456 Boilers - Heat generators - System limits - Electrical power consumption for measurements
TS EN 15459 Energy performance in buildings-Economic evaluation procedure for energy systems in buildings
TS EN 15498 Precast concrete products - Concrete chipboard curtain blocks - Product characteristics and performance
TS EN 15221-1 Facility management - Part 1: Terms and definitions
TS EN 15378 Heating systems in buildings - Inspection of boilers and heating systems
TS EN 15388 Agglomerated stones - Plates and sized products for toilets and kitchens
TS EN 15389 Industrial valves - Performance characteristics of thermoplastic valves used as building products
TS EN 196-5: 2011 Cement test methods - Part 5: Pozzolanic property test in pozzolanic cements
TS EN ISO 19901-2 Oil and gas industry - Special requirements for marine structures - part 2: Seismic design procedures and criteria (iso / fdis 19901-2: 2004)
TS EN 20140-9 Measurement of sound insulation in acoustic structures and building elements section 9: Laboratory measurements of air-to-room sound insulation in a suspended ceiling filled with a top filling material
TS 21 Cement-White portland
TS EN ISO 21003-1 Multilayer pipe systems for indoor hot and cold water installations - Part 1: General
TS EN ISO 21003-3 Multilayer pipe systems for indoor hot and cold water installations - Part 3: Connections
TSE CEN ISO / TS 21003-7 Multilayer pipe systems for indoor hot and cold water installations - Part 7: Guidelines for conformity assessment
TS EN ISO 21003-2 Multilayer pipe systems for indoor hot and cold water installations - Part 2: Pipes
TS EN ISO 22391-5 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 5: Compliance with system purpose
TS EN ISO 22391-2 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 2: Pipes
TS EN ISO 22391-3 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 3: Fittings
TS EN ISO 22391-1 Plastic pipe systems - For hot and cold water systems - Made of polyethylene with increased temperature resistance (pe-Rt) - Part 1: General
TS EN 24006 Flow measurement in closed pipes - Terms, descriptions and symbols
tst 200233371 Public buildings - Equipment requirements and specifications for health buildings
200233823 Water filters - Ceramic
tst EN 50165 / A1 Electrical equipment of non-electrical devices - used in households and similar places - Safety regulations
TS EN 50172 Emergency lighting systems
TS EN 50468 Rules for resistance to overvoltages and overvoltages caused by lighting for equipment with communication doors
TS EN 50470-2 Electrical measuring equipment (aa) - Part 2: Special requirements - Electromechanical meters for active energy (class a and b)
TS EN 50470-3 Electrical measuring equipment (aa) - Part 3: Special requirements - Static meters for active energy (class a, b and c)
Lightning protection - Severe storm warning systems TS EN 50536: 2011 / AC: 2011
TS HD 60364-4-41 Low voltage electrical installations - part 4 - 41: Protection for safety - Protection against electric shock
TS HD 60364-4-42: 2011 Low voltage electrical installation -Part 4-42: Protection for safety -Protection against heat effects
TS HD 60364-5-51 Electrical installations in buildings - Part 5 - 51: Selection and installation of electrical equipment - Common rules
TS HD 60364-5-56 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment group 56: Security services
TS HD 60364-7-701: 2007 / AC: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces part 701: Places where bathtubs or showers are found "
TS HD 60364-7-701: 2007 / AC: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces part 701: Places where bathtubs or showers are found "
IEC 60364-5-53 Building electrical installations - Part 5: Selection and installation of electrical equipment - Group 53: Switching table and control table
TS HD 60364-4-43 Electrical installation in buildings - Part 4: Safety protection - Group 43: Overcurrent protection
TS IEC 60364-7-707 Electrical installation in buildings section 7: Rules for special installations or spaces part 707: Grounding rules for installation of computing equipment
TS HD 60364-4-444 Low voltage electrical installations - Part 4 - 44: Protection for safety -: protection against voltage and electromagnetic disturbances
TS HD 60364-5-54 Low voltage electrical installations - Part 5 - 54: Selection and installation of electrical equipment - Earthing arrangements and protective conductors
TS HD 60364-5-551 Electrical installation in buildings - Part 5: Selection and installation of electrical equipment - Group 55: Other equipment - Part 551: Low voltage generator sets
TS HD 60364-7-701 Electrical installation in buildings part 7: Rules for special installations or spaces part 701: Places where bathtubs or shower trays are found
TS HD 60364-7-701 Electrical installation in buildings part 7: Rules for special installations or spaces part 701: Places where bathtubs or shower trays are found
TS HD 60364-7-702: 2010 Electrical installation in buildings section 7: Rules for special installations or spaces section 702 - Swimming pools and other pools
TS HD 60364-7-703 Electrical installation in buildings - Part 7-703: Rules for special installations or spaces - Rooms and cabins with sauna heaters
TS HD 60364-7-704 Low voltage electrical installations - Part 7-704: Rules for special facilities and sites - Construction and dismantling of construction sites
TS HD 60364-7-706 Low-voltage electrical installations - Part 7-706: Requirements for special installations and locations - Restricted movement conductor locations
TS HD 60364-7-708 Low voltage electrical installations - Part 7-708: Specifications for special installations or places - Electrical installations in caravan parks, camping parks and similar
TS HD 60364-7-709 Low voltage electrical installations - Part 7 - 709: Specification for special installations or locations - For marinas and similar
TS HD 60364-7-717 Electrical installations in buildings - Part 7.717: Rules for special installations or locations - Mobile or portable unit
TS HD 60364-7-721 Low voltage electrical installations - Part 7-721: Specifications for special installations or locations - Electrical installations in caravans and motorhomes
TS HD 60364-7-729 Electrical installation in buildings - Part 7-721: Special installations or areas - Special installations for operation or maintenance passageways
TS HD 60364-7-740 Low voltage electrical installations - Part 7-740: Specification for special installations or places - Structures, entertainment equipment and electrical installations for tents, amusement parks and circuses in the exhibition area
TS HD 60364-7-701: 2007 / A11: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces section 701: Bathrooms or shower trays
TS HD 60364-7-701: 2007 / A11: 2011 Electrical installation in buildings section 7: Rules for special installations or spaces section 701: Bathrooms or shower trays
IEC 60364-4-481 Building electrical installations - Group 48: Selection of protection measures according to external influences - Part 481: Selection of protection measures against electrical impact associated with external influences
IEC 60364-5-548 Building electrical installations - Part 5: Selection and installation of electrical equipment - Part 548: Grounding arrangements and equipotential bonding in information technology installations
TS EN 60379 Household electric water heaters - Performance measurement methods
tst IEC 61312-1 Protection against electromagnetic impacts of lightning - part 1: General principles
TS IEC 60364-7-713 Electrical installation in buildings - part 7: Rules for special installations and spaces - part 713: Furniture
TS EN 61784-3-6: 2010 Industrial communication networks - Preferences - Part 3-6: Functional safety fieldbuses - Cpf Additional features for 6
TS EN 61822 Electrical installations - for lighting and signal lights in airports - Constant current regulators
TSE IEC / TS 61827 Electrical installations - For airport lighting and beacon lights - Characteristics of embedded and elevated luminaires used in helicopter runways and airports
TS EN 62059-31-1 Electrical measuring equipment - Dependency - Part 31-1: Accelerated reliability test - Increased temperature and humidity
TS EN 62059-41 Electrical measuring equipment - Dependency - Part 41: Reliability estimation
TS 13473 Concrete pipes and fittings - Dn 1750 larger than mm
TS 13473 Concrete pipes and fittings - Dn 1750 larger than mm
TSE K 118 Precast concrete elements - Quality management systems
tst 1260 Carrier flooring bricks (participating in static work)
TS EN 13084-5 / AC Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
TS EN 13084-5 / AC Chimneys - Free standing - Part 5: Material for brick lining - Product specifications
tst EN 14303 Thermal insulation products - For building installation and industrial applications - Fabricated mineral wool products - Features
tst EN 14305 Thermal insulation products -For building installation and industrial applications -Profile fabricated porous glass (cg) products -Features
tst EN 14306 Thermal insulation products - For building installation and industrial applications - Fabricated calcium silicate (cs) products - Features
tst EN 14307 Thermal insulation products - For building installation and industrial applications - Fabricated polystyrene (xps) foam products - Features
tst EN 14308 Thermal insulation products - For building installation and industrial applications - Fabricated rigid polyurethane (pur) and rigid polyisocyanate (py) foam products - Features
tst EN 14309 Thermal insulation products - For building installation and industrial applications - Fabricated expanded polystyrene (eps) products - Features
TS EN 62056-46 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - Part 46: Data link layer using Hdlc protocol
TS EN 115-1 Safety for escalators and escalators-Section 1: Construction and installation
TSE CEN / TR 13833 Competence of construction contractors