Fluid Systems and Components Used in Aircraft and Aerospace Vehicles All of the procedures specified in the standard with our expert staff, all necessary methods are applied by completing the tests and perform your certification.
TS EN 2348 Aviation series-Control cable assemblies-Technical specifications
TS EN 3269 Aviation series-Titanium alloy pipe connectors 8 ° 30-Compounds with blind, dynamic jet seal
TS EN 3272 Aviation series-Pipe connectors 8 ° Dynamic bead end for ring 30, welded, geometric configuration
TS EN 3273 Aviation series-Pipe connectors 8 ° 30- Dynamic jet seal for corners, t-shaped and diagonal; Geometric configuration
TS EN 3275 Aviation series-28000 pipe joining up to kpa 8 ° 30-Dynamic beam seal: Metric series; Technical specification
TS EN 4017 Aviation series-Titanium alloy 8 ° 30 'pipe connection - 90 ° elbow
TS EN 4184 Aviation series-Made of titanium alloy 8 ° 30 'pipe connection-45 ° elbow-Welded ends
TS EN 4186 Aviation series-Titanium alloy 8 ° 30 pipe connection-Glands
TS EN 2622 Aviation series-Circular tubes for fluids in heat-resistant alloys-Diameter 3,2 mm d 100 mm: Dimensions
TS EN 4019 Aviation series - 8 ° 30 'pipe connection made of titanium alloys - 90 ° elbows with welded ends
TS EN 4021 Aviation series-Titanium alloy pipe joint 8 ° 30-Corners 90 °, bulkhead
TS EN 3243 Aviation series-Titanium alloy pipe connection 8 ° 30- Compound, welded, end-tight
TS EN 3244 Aviation series - Titanium alloy pipe connection 8 ° 30 double ended
TS EN 3245 Aviation series-Pipe connection made of titanium alloy 8 ° 30-Reduction
TS EN 3246 Aviation series - Pipe connections made of titanium alloy 8 ° 30-Spacer
TS EN 3247 Aviation series - Pipe connection made of titanium alloy 8 ° 30-End welded insert
TS EN 3248 Aviation series - Titanium alloy pipe fitting 8 ° 30-Adapters reduced with pipe end retaining ring
TS EN 3561 Aviation series - Pipe connection made of titanium alloy 8 ° 30- Sealing compound, welded and reduced
TS EN 4180 Aerospace series - Round tubes made of titanium and titanium alloy for fluids - Width tolerances - Diameter 4 mm d 40 mm dimensions
TS EN 4182 Aviation series - Titanium alloy pipe fitting 8 ° 30-T reduced
TS EN 4183 Aviation series-Pipe connection made of titanium alloy 8 ° 30 90 ° elbow, welded ends l
TS EN 4188 Aviation series - Pipe connection 8 ° titanium alloy 30 - Turns 90 ° splitting, long, welding end
TS EN 3748 Aviation series-O-Ring grooves-Dimensions
TS EN 3788 Aviation series-8 ° 30 'pipe connection-Protective caps
TS EN 3789 Aviation series - 8 ° 30 'pipe connection - Protective plugs for external screws
TS EN 3790 Aviation series-8 ° 30 'pipe connection-Protective plugs for internal screws
TS EN 4267 Aviation series-Round bars of titanium and titanium alloy-Diameter 6 mm-160 mm-Dimensions
TS EN 3856 Aviation series - Pipe connections, 60 °, spherical, titanium alloy t-P64001 - Nuts for drawing wires
TS EN 3867 Aviation series - Pipe connections, titanium alloy t-P64001 flanges with loose flanges and gaskets
TS EN 3868 Aviation series - Pipe connections, loose flange and gasket, titanium alloy t-P64001 flange connections, welded
TS EN 4054 Aerospace series - Pipe connections, loose flanges and gaskets - Fluorocarbon rubber gaskets and aluminum alloy fittings - Technical specifications
TS EN 4166 Safety devices for protection against overpressure section 2: Blasting disc safety devices
TS EN 4560 Aviation series - Pipe connections, 37 ° - Spherical, up to 21000 kpa pressure - Inch series - Technical specifications
TS EN 4561 Aviation series - Pipe connections, welded, heat-resistant steel, with 90 ° elbow - Inch series
TS EN 3630 Aviation series - Fittings for fluids, flanged, straight - Sealing with O-Gasket for pipes with wall thickness 0,8 mm
TS EN 3633 Aerospace series - Mounting hole for flanged, fluid connectors
TS EN 4023 Aviation series-Titanium alloy pipe joint 8 ° 30-Joints 45 °
TS EN 4025: 2010 Aviation series - Pipe joints in titanium alloys 8 ° 30-Corners 45 ° with welded end protection wire nuts
TS 9028 Rules for liquid oxygen supply equipment (stanag 3499)
TS EN 2245 Aviation series - Pipelines for liquids and gases - Recipes
TS EN 4686: 2014 Air-Space series - Pipe coupling 8 ° in 30 'titanium alloy - Fitted plug
TS EN 2348 Aviation series-Control cable assemblies-Technical specifications
TS EN 3269 Aviation series-Titanium alloy pipe connectors 8 ° 30-Compounds with blind, dynamic jet seal
TS EN 3272 Aviation series-Pipe connectors 8 ° Dynamic bead end for ring 30, welded, geometric configuration
TS EN 3273 Aviation series-Pipe connectors 8 ° 30- Dynamic jet seal for corners, t-shaped and diagonal; Geometric configuration
TS EN 3275 Aviation series-28000 pipe joining up to kpa 8 ° 30-Dynamic beam seal: Metric series; Technical specification
TS EN 4017 Aviation series-Titanium alloy 8 ° 30 'pipe connection - 90 ° elbow
TS EN 4184 Aviation series-Made of titanium alloy 8 ° 30 'pipe connection-45 ° elbow-Welded ends
TS EN 4186 Aviation series-Titanium alloy 8 ° 30 pipe connection-Glands
TS EN 2622 Aviation series-Circular tubes for fluids in heat-resistant alloys-Diameter 3,2 mm d 100 mm: Dimensions
TS EN 4019 Aviation series - 8 ° 30 'pipe connection made of titanium alloys - 90 ° elbows with welded ends
TS EN 4021 Aviation series-Titanium alloy pipe joint 8 ° 30-Corners 90 °, partition 5
TS EN 3243 Aviation series-Titanium alloy pipe connection 8 ° 30- Compound, welded, end-tight
TS EN 3244 Aviation series - Titanium alloy pipe connection 8 ° 30 double ended
TS EN 3245 Aviation series-Pipe connection made of titanium alloy 8 ° 30-Reduction
TS EN 3246 Aviation series - Pipe connections made of titanium alloy 8 ° 30-Spacer
TS EN 3247 Aviation series - Pipe connection made of titanium alloy 8 ° 30-End welded insert
TS EN 3248 Aviation series - Titanium alloy pipe fitting 8 ° 30-Adapters reduced with pipe end retaining ring
TS EN 3561 Aviation series - Pipe connection made of titanium alloy 8 ° 30- Sealing compound, welded and reduced
TS EN 4180 Aerospace series - Round tubes made of titanium and titanium alloy for fluids - Width tolerances - Diameter 4 mm d 40 mm dimensions
TS EN 4182 Aviation series - Titanium alloy pipe fitting 8 ° 30-T reduced
TS EN 4183 Aviation series-Pipe connection made of titanium alloy 8 ° 30 90 ° elbow, welded ends l
TS EN 4188 Aviation series - Pipe connection 8 ° titanium alloy 30 - Turns 90 ° splitting, long, welding end
TS EN 3748 Aviation series-O-Ring grooves-Dimensions
TS EN 3788 Aviation series-8 ° 30 'pipe connection-Protective caps
TS EN 3789 Aviation series - 8 ° 30 'pipe connection - Protective plugs for external screws
TS EN 3790 Aviation series-8 ° 30 'pipe connection-Protective plugs for internal screws
TS EN 4267 Aviation series-Round bars of titanium and titanium alloy-Diameter 6 mm-160 mm-Dimensions
TS EN 3856 Aviation series - Pipe connections, 60 °, spherical, titanium alloy t-P64001 - Nuts for drawing wires
TS EN 3867 Aviation series - Pipe connections, titanium alloy t-P64001 flanges with loose flanges and gaskets
TS EN 3868 Aviation series - Pipe connections, loose flange and gasket, titanium alloy t-P64001 flange connections, welded
TS EN 4054 Aerospace series - Pipe connections, loose flanges and gaskets - Fluorocarbon rubber gaskets and aluminum alloy fittings - Technical specifications
TS EN 4166 Safety devices for protection against overpressure section 2: Blasting disc safety devices
TS EN 4560 Aviation series - Pipe connections, 37 ° - Spherical, up to 21000 kpa pressure - Inch series - Technical specifications
TS EN 4561 Aviation series - Pipe connections, welded, heat-resistant steel, with 90 ° elbow - Inch series
TS EN 3630 Aviation series - Fittings for fluids, flanged, straight - Sealing with O-Gasket for pipes with wall thickness 0,8 mm
TS EN 3633 Aerospace series - Mounting hole for flanged, fluid connectors
TS EN 4023 Aviation series-Titanium alloy pipe joint 8 ° 30-Joints 45 °
TS EN 4025: 2010 Aviation series - Pipe joints in titanium alloys 8 ° 30-Corners 45 ° with welded end protection wire nuts
TS 9028 Rules for liquid oxygen supply equipment (stanag 3499)
TS EN 2245 Aviation series - Pipelines for liquids and gases - Recipes
TS EN 4686: 2014 Air-Space series - Pipe coupling 8 ° in 30 'titanium alloy - Fitted plug
TS EN 3268: 2014 Aviation series-Titanium alloy pipe connectors 8 ° 30-Pressure plug
TS EN 3631: 2014 Aerospace series - Fittings for fluids, with flanges, 90 ° elbow - ON seal for pipes with wall thickness 0,8 mm
TS EN 3635: 2014 Aviation series - Welding nozzle - Geometric configuration
TS EN 4551: 2014 Aviation series - Pipe connections, 37 ° - Made of temperature resistant steel - Rotating nuts - Inch series
TS EN 4549: 2014 Aerospace series - Pipe coupling made of heat-resistant steel or heat-resistant nickel alloy - Soldered coupling - Design configuration - Inch series
TS EN 4550-1 Aviation series - Pipe connection, 37 ° - Design configuration - Inch series - Part 1: Male sealing tips, circular
TS EN 4550-4 Aviation series - Pipe connection, 37 ° - Design configuration - Inch series - Part 4: Female sealing ends
TS 6477 Aeronautics - Fluid systems and components - Pressure and temperature classifications
TS EN 6138 Aviation series - Cover, protective, non-metal,? 3000 PSI mounted on hydraulic system terminals
TS EN 2258 Aviation series-Aluminum and aluminum alloys-Circular tubes for fluids-Diameter: 3,2> d> 100mm-Thickness 0,6mm> a> 2,5mm-Dimensions
TS EN 2361 Aviation series-Control cable, mold-shaped type double body in corrosion-resistant steel, spherical ends; Dimensions and loads
TS EN 2624 Aviation series - Pressure impact test of hydraulic system components
TS EN 2656 Aviation series - Pipe connection - Connectors, welded, geometric configuration
TS 2682 Dimensions of pressurized oil supply connections for aircraft
TS 2954 Dimensions of connections used in pressurized water-methanol systems in aircraft
TS EN 3045 Aviation series - Feet, body rotating, made of steel, rigid single row spherical plain bearings Diameter series 0 and 2: Reduced span category, dimensions and loads
TS EN 3046 Aerospace series - Bearings - Steel - Cadmium coated - One row of deep groove ball - Rolling cage - Diameter series 0 and 2 - Reduced backlash category - Dimensions and loads
TS EN 3047 Aerospace series - Rolling bearings - Corrosion resistant steel - A row of deep groove ball - With rolling cage - Diameter series 0 and 2 - Reduced backlash category - Dimensions and loads
TS EN 3049 Aviation - 0 rings - Fluorocarbon rubbers (fkm) - Low compression set - Hardness 80
TS EN 3050 Aviation - 0 rings - Fluorocarbon rubber (fkm) - Low compression set technical specifications
TS EN 3079 Aviation series - 28000 ° 8 'pipe connections up to 30 kpa - Adapters - Metric series - Technical specifications
TS EN 3080 Aviation series - 8 ° 30 'pipe connections made of titanium alloy - T-connections, shrink sleeve (pipe)
TS EN 3081 Aviation series-8 ° 30 'pipe fitting made of titanium alloy-ferrules, welded with dynamic sealing for repair
TS EN 3082 Aviation series-Titanium alloy 8 ° 30 'pipe connection-Glands-Body compartment, welded
TS EN 3082 / AC Aviation series-Titanium alloy 8 ° 30 'pipe connection-Glands-Body compartment, welded
TS EN 3083 Aviation series - 8 ° 30 'pipe connection made of titanium alloy - Fittings, welded end for repair
TS EN 3083 / AC Aviation series-8 ° 30 'pipe fitting made of titanium alloy-Glands, welded end for repair
TS EN 3084 Aviation series - 8 ° 30 'pipe connection fittings made of titanium alloy, welded screw end for repair
TS EN 3084 / AC Aviation series-8 ° 30 'pipe fittings made of titanium alloy, welded with screw end for repair
TS EN 3264: 2010 Aviation series - Titanium alloy pipe connection 8 ° 30-Print ring
TS EN 3270 / AC Aviation series-Titanium alloy pipe connectors 8 ° 30-Cavity plugs, with locking ring
TS EN 3274: 2010 Aviation series-Pipe connectors 8 ° 30-Screw threaded; Geometric configuration
TS EN 3561 / AC Aviation series - Pipe connection made of titanium alloy 8 ° 30- Sealing compound, welded and reduced
TS EN 3566 Aviation series-Titanium alloy pipe joint 8 ° 30-Locked adapters
TS EN 3566 / AC Aviation series-Titanium alloy pipe joint 8 ° 30-Locked adapters
TS EN 3663 Aviation series - Pipe connections - Nbr rubber o-rings - Hardness 75 armor, temperature range -55ºc to 135ºc
TS EN 3658 Aviation series - Tube turning radii, for motor applications - Design standard
TS EN 3688 Aviation series - Titanium alloy t-Ring fillings for welded pipes - 14000 kpa rated pressure
TS EN 3688 / AC Aerospace series - Titanium alloy t-Ring fillings for welded pipes - 14000 kpa rated pressure
TS EN 3689 Aerospace series-Titanium alloy t-Ring fillings for welded pipes -28000 kpa rated pressure
TS EN 3689 / AC Aviation series-Titanium alloy t-Ring fillings for welded pipes -28000 kpa rated pressure
TS EN 3690 Aviation series-Titanium alloy pipe joint 8 ° 30-Combined, split, long
TS EN 3690 / AC Aviation series-Titanium alloy pipe joint 8 ° 30-Combined, split, long
TS EN 3691 Aviation series-Titanium alloy pipe joint 8 ° 30-Joints, split, long welded
TS EN 3691 / AC Aviation series-Titanium alloy pipe joint 8 ° 30-Joints, split, long welded
TS EN 3717 Aerospace series - Pipes - Selection according to flowing systems in engines
TS EN 3730 Aviation series clamps-Fixed and slippery type-Made of aluminum alloy -Lastically sealed-Dimensions
TS EN 3788 / AC Aviation series-8 ° 30 'pipe connection-Protective caps
TS EN 3789 / AC Aviation series - 8 ° 30 'pipe connection - Protective plugs for external screws
TS EN 3790 / AC Aviation series-8 ° 30 'pipe connection-Protective plugs for internal screws
TS EN 3851 Aviation series - Pipe connections, 60 °, spherical, titanium alloy t-P64001 - Nuts, straight
TS EN 3852 Aviation series - Pipe connections, 60 °, spherical, titanium alloy tI-P64001 -, straight fittings, welded, screwed
TS EN 3853 Aviation series - Pipe connections, 60 °, spherical, titanium alloy ti-P64001 - Straight fittings, screwed
TS EN 3854 Aviation series - Pipe joints, 60 °, spherical, titanium alloy t-P64001 - Bracelets, welded
TS EN 3855 Aviation series - Pipe connections, 60 °, spherical, titanium alloy t-P64001 - Covers
TS EN 3857 Aviation series - Pipe connections, 60 °, spherical, titanium alloy t-P64001 - Elbows 90 °, welded
TS EN 3858 Aviation series - Pipe connections, 60 °, spherical, titanium alloy, t-P64001 - Fe-Pa13
TS EN 3869 Aviation series - Pipe connections, with loose flanges and gaskets - Fluorocarbon rubber gaskets and aluminum alloy fittings
TS EN 4018 Aviation series-Titanium alloy pipe joint 8 ° 30-Corners 90 ° with protection nut
TS EN 4020 Aviation series-8 ° Pipe connections made of 30 'titanium alloy-90 ° elbows, with push-wire nut, end welded
TS EN 4022 Aviation series-Titanium alloy pipe joint 8 ° 30-Corners 90 °, bulkhead, welded end
TS EN 4024 Aviation series - Pipe joints in titanium alloys 8 ° 30-Corners 45 ° with welded end protection wire nuts
TS EN 4026 Aviation series-Titanium alloys pipe joint 8 ° 30-T shaped
TS EN 4027 Aviation series - 8 ° 30 'pipe connections made of titanium alloy - T rod with nut, push wire
TS EN 4028 Aviation series-8 ° 30 'pipe connections made of titanium alloy-Push wire nut bends
TS EN 4029 Aviation series - 8 ° 30 'pipe connection made of titanium alloy
TS EN 4030 Aviation series-8 ° 30 'pipe connection made of titanium alloy-T
TS EN 4031 Aviation series-8 ° 30 'pipe connection made of titanium alloy-Nut for welded ferrule
TS EN 4032 Aviation series - 8 ° 30 'pipe connection made of titanium alloy - Push wire
TS EN 4032 / AC Aviation series - 8 ° 30 'pipe connection made of titanium alloy - Push wire
TS EN 4045 Aviation series - Tubes made of heat-resistant alloy, seamless diameter 0,6 mm d 2 mm-Dimensions
TS EN 4051 Aviation series - Pipe connections, 60 °, spherical, titanium alloy - Port connection
TS EN 4167 Aviation series - Clamps, spring tension, three parts - Internal clamps made of temperature-resistant steel fe-Pa92ht (a286)
TS EN 4168 Aviation series - Clamps, spring tension, three parts - External clamps made of temperature-resistant steel fe-Pa92ht (a286) -
TS EN ISO 4180 Completely filled transport packages - General rules for the creation of performance test programs - Part 1: General principles
TS EN 4185 Aviation series-Titanium alloy 8 ° 30 'pipe connection-T-piece housing compartment
TS EN 4187 Aviation series-Titanium alloy pipe joint 8 ° 30-Corners 90 ° section, long
TS EN 4189 Aviation series - Pipe connection made of titanium alloy 8 ° 30-T, spacer, long
TS EN 4190 Aviation series-Titanium alloy pipe connection 8 ° 30-T shaped during operation reduced by pressure ring
TS EN 4191 Aviation series-Titanium alloy pipe connection 8 ° 30-T-shaped, reduced, spacer, long
TS EN 4192 Aviation series-Titanium alloy 8 ° 30 'pipe connection-Trailed housing compartment
TS EN 4193 Aviation series -Titanium alloy 8 ° 30 'pipe connection -Reducted housing compartment
TS EN 4194 Aviation series - Titanium alloy 8 ° 30 'pipe connection - Trunked housing compartment
TS EN 4233 Aviation series-Titanium alloy 8 ° 30 'pipe connection-Fittings, welded, with screw
TS EN 4550-2 Aviation series - Pipe connections, 37 ° - Design configuration - Inch series - Part 2: Terminal leads
TS EN 4550-3 Aviation series - Pipe connections, 37 ° - Design configuration - Inch series - Part 3: Terminal connections -
TS EN 4552 Aviation series - Pipe connections, 37 ° - Spherical, heat resistant steel - Correct rings, welded end - Inch series
TS EN 4553 Aviation series - Pipe joints, 37 ° - Spherical, heat-resistant steel - 90 ° elbow rings, welded end - Inch series
TS EN 4554 Aviation series - Pipe connections, 37 ° - Spherical, heat-resistant steel - Smooth sleeves, thread - Inch series
TS EN 4555 Aviation series - Pipe connections, 37 ° - Temperature resistant steel - Ferrules, welded end - Inch series
TS EN 4556 Aviation series - Pipe connections, 37 ° - Temperature-resistant steel - Cover group - Inch series
TS EN 4557 Aviation series - Pipe connections, 37 ° - Spherical, heat-resistant steel - T-cut rings, welded end - Inch series
TS EN 4562 Aviation series - Pipe joints, welded, heat-resistant steel, reduction - Inch series
TS EN 4563 Aviation series - Pipe connections, welded, heat-resistant steel, t-piece - Inch series
TS EN 4610 Aviation series - 8 ° 30 'pipe connection made of titanium alloy - 45 ° elbows, with pull wire nut
TS ISO 6477 American walnut-inside
TS 6558 Aviation-Refueling of gas oxygen, for use in liquid systems (old type)-Dimensions (inch series)
TS 6828 Aeronautics -Fluid systems-Impulse test for hydraulic hose, pipe and plug-in
TS ISO 7169 Aviation - Separable pipe fittings for fluid systems with pressure up to 3000 psi or 21 kpa, cone angle 24 degree - Purchase specifications, inch / metric
TS 7301 Aviation-Hydraulic systems and components-Sampling and determination of particulate pollution from hydraulic fluids
TS ISO 7319 Aerospace series - Fluid systems - Contact surface for 24 ° tapered metric fittings
TS 7508 Aircraft - Pressurized fuel distribution system - Test method and overpressure increase limit value
TS 8374 Aircraft - Connections for air starting engines
TS 8831 Additives-Anti-icing in aircraft fuel systems
TS 8831 Additives-Anti-icing in aircraft fuel systems
TS 8857 Polytetrafluoroethylene (ptfe) connections for aerospace applications-Density and relative density determination methods
TS 8908 Aircraft-High pressure air filling valves
TS 8935 Aerospace-Distribution pumps-Hydraulic, pressure-compensated variable-General features
TS 8976 Pipes - Used in aerospace - External diameters and wall thicknesses (in metric system)
TS 9028 Rules for liquid oxygen supply equipment (stanag 3499)
TS 9157 Aircraft - Fuel connections - Pressure
TS 9158 Airplanes - Fuel fillers
TS 9159 Aviation - "p" clamps - used in fluid systems - Dimensions
TS ISO 9938 Aviation - Polytetrafluoroethylene (ptfe) hose assemblies - 204 ° c / 28 000 kpa class - Purchase features
TS ISO 10583 Aviation - Fluid systems - test methods for pipe / fitting assemblies
TS 11315 Aviation-Hose and hose assemblies - from polytetrafluoroethylene (ptfe) to 232øc temperature and 10500 kpa pressure