Our company provides testing, inspection and certification services to all of the following Aircraft and Space Vehicles Electrical Equipment and Systems standards, with its extensive testing and analysis services structure.

TS EN 2570 Aviation series-Nickel-Cadmium accumulators-Technical specifications 

TS EN 2591 Aviation series - Electrical and optical fasteners - Test methods - General 

TS EN 2591-101 Aerospace series - Electrical and optical fasteners - Test methods - Part 101: Visual inspection 

TS EN 2591-204 Aerospace series - Electrical and optical connectors - Test methods - Part 204: Contact interruption in the microsecond range 

TS EN 2591-206 Aerospace series - Electrical and optical fasteners - Test methods - Part 206: Insulation resistance measurements 

TS EN 2986 Aviation series - Nickel - Cadmium accumulators - Formal type B 

TS EN 2993 Aviation series - Nickel - Cadmium accumulators - Format F type 

TS EN 3139 Aerospace series - Riveted full 100 ° countersunk normal-head corrosion-resistant, steel-made fe-Pa11 posivated inch-based series 

TS EN 3475-808 Aviation series-Cables, electrical, used in aircraft, test methods-Part 808: Cross-talk Note: EN 3475-100 (2002-02) is applied in connection with. 

TS EN 2591-708 Aviation series-Electrical and optical connection elements: Test methods-Part 708: Electrical elements; Measurement of surface transfer impedance of connectors 

TS EN 2591-709 Aviation series-Electrical and optical connectors: Test methods-Part 709: Electrical elements: Tensile strength of connectors 

TS EN 2591-6101 Aerospace series - Electrical and optical components: Test methods - Part 6101: Optical elements: Visual inspection 

TS EN 2591-6303 Aviation series - Electrical and optical fasteners; Test methods-Part 6303: Optical elements; Cold / low pressure and humid heat 

TS EN 2591-6301 Aviation series - Electrical and optical fasteners; Test methods-Part 6303: Optical elements; Cold / low pressure and humid heat 

TS EN 2591-6305 Aviation series - Electrical and optical fasteners; Test methods-Part 6305: Optical elements: Rapid change of temperature 

TS EN 2591-6306 Aviation series - Electrical and optical fasteners; Test methods-Part 6306: Optical elements; Mold growth 

TS EN 2591-6307 Aviation series - Electrical and optical fasteners; Test methods-Part 6307: Optical elements; Salt series 

TS EN 2591-6314 Aviation series-Electrical and optical connectors-Test methods-Part 3614: Optical elements-Immersion at low air pressure 

TS EN 3475-201 Aerospace series-Electrical cables used in aeronautics-Test methods-Part 201: Visual inspection / note: Only applicable with most 3475-100 

TS EN 3475-202 Aerospace series-Electrical cables used in aeronautics-Test methods-Part 202: Mass / note: Only applicable with most 3475-100. 

TS EN 3475-301 Aviation series-Electrical cables used in aeronautics-Test methods-Part 202: Mass / note: Only applicable with most 3475-100. 

TS EN 3475-303 Aviation series-Electrical cables used in aeronautics-Test methods-Part 303: Insulator resistance / note: Only applicable with most 3475-100. 

TS EN 3475-304 Aviation series-Electrical cables used in aeronautics-Test methods-Section 304: Surface resistance / note: Only applicable with most 3475-100. 

TS EN 3475-305 Aviation series-Electrical cables used in aeronautics-Test methods-Section 305: Overload resistance / Note: Applicable only with 3475-100. 

TS EN 3475-401 Aerospace series-Electrical cables used in aeronautics-Test methods-Section 401: Accelerated stability / note: Only applicable with most 3475-100. 

TS EN 2591-6315 Aviation series-Electrical and optically connected elements; Test methods-Part 6315: Optical elements, fluid resistance 

TS EN 2591-6316 Aviation series-Electrical and optical connectors: Test methods-Part 6316: Optical elements: Ozone resistance 

TS EN 2591-6317 Aerospace series-Electrical and optical connectors-Test methods-Part 6317-Optical elements: Flammability / Width applied in connection with 2591-100 

TS EN 2591-6318 Aviation series - Electrical and optical fasteners; Test methods - Part 6318: Optical elements: Flame resistance / Width applied in connection with 2591-100. 

TS EN 2591-6321 Aviation Series - Optical and electrical fasteners; Test methods - Part 6321: Optical elements; Humidity and heat cycle test 

TS EN 2591-6323 Aviation series - Electrical and optical fasteners; Test methods-Part 6323: Optical elements: Heat shock (hermetically sealed equipment) 

TS EN 2591-6324 Aviation series - Electrical and optical fasteners; Test methods-Part 6324: Optical elements face to face sealing / note: Most are applied in connection with 2591-100. 

TS EN 2591-6401 Aviation series - Electrical and optical fasteners; Test methods-Part 6401: Optical elements; Steady-state acceleration / note: Most applied in conjunction with 2591-100. 

TS EN 2591-6402 Aviation series - Electrical and optical fasteners; Test methods - Part 6402: Optical elements Shock / note: Applied in conjunction with most 2591-100. 

TS EN 3475-402 Aerospace series - Cables, electrical, used in aircraft; Test methods-Part 402: Tensile and thinning / note: Apply in conjunction with most 3475-100 

TS EN 3475-403 Aerospace series-Electrical cables used in aeronautics-Test methods section 403: Segmentation and blocking Note: Only applicable with most 3475-100. 

TS EN 3475-404 Aerospace series - Electrical cables used in aeronautics-Test methods-Section 404: Thermal shock note: Only applicable with most 3475-100. 

TS EN 3475-405 Aerospace series-Electrical cables used in aeronautics-Test methods section 405: Bending at ambient temperature Note: Only applicable with most 3475-100. 

TS EN 3475-406 Aerospace series-Electrical cables used in aeronautics-Test methods-Section 406: Cold bending test Note: Only applied with most 3475-100. 

TS EN 3475-409 Aviation series-Electrical cables used in aviation-Test methods-Section 409: Aging in air Note: Only used with most 3475-100. 

TS EN 3475-410 Aerospace series - Test methods for electrical cables used in aeronautics section 410: Thermal fatigue Note: Only 3475-100 and astm d 3032 (1986) are applied together with paragraph 14. 

TS EN 3475-412 Aviation series-Electrical cables used in aviation-Test methods-Part 412: Moisture resistance 

TS EN 3475-413 Aerospace series -Electrical cables used in aeronautics -Experience methodsChapter 413: Reverse winding test 

TS EN 3475-502 Aerospace series - Test methods for electrical cables used in aeronautics - Section 502: Notch spread / note: Only applicable with most 3475-100. 

TS EN 3475-503 Aerospace series -Electric cables used in aviation-Test methods-Section 503: Stripping abrasion / note: Applicable only with most 3475-100. 

TS EN 3475-504 Aerospace series-Electrical cables used in aeronautics-Test methods-Section 504: Bend / note: Only applicable with most 3475-100. 

TS EN 3475-509 Aerospace series -Electrical cables used in aviation-Test methods-Part 509: Solderability 

TS EN 3475-510 Aerospace series-Test methods for electrical cables used in aeronautics-Section 510-Tensile strength and extrusion 

TS EN 3475-511 Aviation series-Electrical cables used in aviation-Test methods-Part 511: Friction of cable to cable 

TS EN 3475-512 Aviation series-Electrical cables used in aviation-Test methods section 52: Bending strength

TS EN 3842 Aerospace series - Circular tubes made of corrosion-resistant steel - Diameter 3,2 mm d 100 mm, thickness 0,32 mm to 2,5 mm 

TS EN 2591-6403 Aerospace series -Electrical and optical fasteners: Test methods-Part 6403: Optical elements: Vibrations / note: Most applicable in conjunction with 2591-100. 

TS EN 2591-6404 Aviation series-Electrical and optical connection elements: Test methods-Part 6404: Optical elements; Transverse load / note: Width applies in conjunction with 2591-100 

TS EN 2591-6405 Aviation series-Electrical and optical connection elements: Test methods-Part 6405: Optical elements; Axial load / note: Apply in conjunction with most 2591-100 

TS EN 2591-6406 Aviation series-Electrical and optical connection elements: Test methods-Part 6404: Optical elements; Mechanical strength / note: Applied in conjunction with most 2591-100. 

TS EN 2591-6414 Aviation series-Electrical and optical fasteners; Test methods-Part 6414: Optical elements; Mismatch of optical fasteners that release the draw rope - note: applies in conjunction with most 2591-100 

TS EN 2591-6415 Aviation series-Electrical and optical connectors-Test methods-Part 6415: Optical elements-Test probe damage 

TS EN 2591-7301 Aviation series-Electrical and optical connectors-Test methods-Section 7301: Electrical elements-Temperature resistance of the coupling

TS EN 3475-701 Aerospace series-Cables, electricity, test methods used in aircraft-Part 701: Adhesiveness of conductor insulation 

TS EN 3475-702 Aerospace series-Cables, electrical, used in aircraft, test methods-Section 702: Screen push-back capability 

TS EN 3475-703 Aerospace series-Cables, electricity, used in aircraft-Test methods-Part 703: permanence of manufacturer's brand

TS EN 3475-804 Aerospace series-Cables, electricity, used in aircraft, test methods-Part 804-Spreading speed 

TS EN 2591-426 Aviation series-Electrical and optical connectors-Test methods-Part 426: Contact stop system efficiency 

TS EN 2591-427 Aviation series-Electrical and optical fasteners-Test methods section 427: Protective cap connection 

TS EN 2591-428 Aerospace series - Electrical and optical connectors - Test methods - Part 428: Current transients caused by current transmission in cable connections

TS EN 2591-501 Aviation series-Electrical and optical connectors-Test methods-Part 501: Soft solderability 

TS EN 2591-502 Aviation series-Electrical and optical connectors-Test methods-Part 502: Restricted part 

TS EN 2591-503 Aviation series-Electrical and optical connection elements-Test methods-Part 503: Contact failure after shoe connection 

TS EN 2591-505 Aviation series-Electrical and optical connectors-Test methods-Part 505: Contact protection efficiency 

TS EN 2591-506 Aerospace series-Electrical and optical fasteners-Test methods-Part 506: Using tools 

TS EN 2591-508 Aviation series-Electrical and optical connectors-Test methods-Part 508: Measurement of coating thickness on contacts 

TS EN 2591-509 Aerospace series - Electrical and optical connectors - Part 509: Adhesion of coating on contacts 

TS EN 2591-512 Aerospace series Test methods for electrical and optical connectors -Chapter 512: Degree of fixing of the sealed connection socket 

TS EN 3567-001 Line connectors for use in the versatile data bus system in accordance with the MIL-STD-1553B aviation series-Part 001-Technical specifications 

TS EN 2591-614 Aerospace series - Electrical and optical connector test methods - Part 614: Optical elements radiol compression connection 

TS EN 2591-211 Aviation series-Electrical and optical connectors: Test methods-Part 211: Capacitance 

TS EN 2591-217 Aerospace series - Electrical and optical connectors - Test methods - Part 217: Voltage drop at certain current for connections in the line and terminal lugs 

TS EN 2591-218 Aerospace series - Electrical and optical connectors - Test methods - Part 218: On-line connections and aging of terminal lugs with temperature and current cycle 

TS EN 2591-219 Aerospace series-Optical and electrical fittings-Test methods-Part 219: Tensile strength for bending soldering on insulated ends and on the same line 

TS EN 2591-325 Aerospace series-Optical and electrical connectors, test methods-Part 325: Icing resistance 

TS EN 2591-415 Aviation series-Electrical and optical connectors-Test methods-Part 415: Test probe damage (female contacts) 

TS EN 2591-416 Aviation series-Electrical and optical fasteners: Test methods-Part 416: Test drilling damage (female contact) 

TS EN 2591-417 Aviation series - Electrical and optical fasteners; Test methods-Part 417: Tensile strength (crimped connection) 

TS EN 2591-418 Aviation series - Electrical and optical fasteners; Test methods-Part 418: Gauge insertion / tensile forces (female contact) 

TS EN 2591-419 Aviation series - Electrical and optical fasteners; Test methods-Section 419: Male contact stability in insert 

TS EN 3745-511 Aerospace series-Cables and wires, optics, used in aircraft, test methods-Part 511-Wear between cables 

TS EN 3745-701 Aerospace series-Cables and wires, optics, used in aircraft; Test methods section 701: Scrapability 

TS EN 2591-421 Aviation series-Electrical and optical fasteners-Test methods-Part 421: Free fall 

TS EN 2591-422 Aerospace series -Electrical and optical fasteners-Test methods-Section 422: Locking cable hole strength 

TS EN 2591-424 Aerospace series - Electrical and optical fasteners: Test methods - Part 424: Dismantling force, solderless packaged connections 

TS EN 2591-425 Aerospace series - Electrical and optical connectors - Test methods - Part 425: Bending capability, solderless, bent connections 

TS EN 3475-807 Aerospace series - electric cables, aircraft use - Test Methods - Part 807: Transfer impedance 

tst 11694 Electromagnetic environmental influences (e³) - Rules for aircraft systems and equipment

TS EN 2714-007 Aviation - Cables, electrical, general purpose, single and multi-core - Operating temperatures -55 ° c to 260 ° c - Part 007: Screened (helical-shaped) and coated, uv laser printing - Product standard 

TS EN 3155-003 Aerospace series - Electrical contact points for fasteners - Part 003: Contact points, electrical, female, type a, bent, class s - Product standard

TS EN 4057-201 Aviation series - Hardware cable ties - Test methods - Part 201: Visual inspection 

TS EN 4057-305 Aviation series - Hardware cable ties - Test methods - Part 305: Color permanence 

TS EN 3475-403 / AC Aerospace series-Electrical cables used in aeronautics-Test methods section 403: Segmentation and blocking 

TS EN 3155-008 Aerospace series - Electrical contacts for fasteners - Part 008: Contacts, electrical, male, type a, inclined, class s - Product standard 

TS EN 4199-002 Aerospace series - Tying strip for airplanes - Part 002: Product standard index 

TS EN 4199-006 Aerospace series - Tying strip for aircraft - Part 006: Round copper conductors for tying strips, tin plated up to 150 ° c or nickel plated up to 260 ° c - Product standard 

TS EN 4529-001 Aviation series - Electrical and optical connectors - Sealing plugs - Part 001: Technical specifications 

TS EN 4529-002 Aviation series - Electrical and optical fasteners - Sealing plugs - Part 002: Product standards index 

TS EN 4529-003 Aerospace series - Electrical and optical connectors - Sealing plugs - Part 003: T-class - Product standard 

TS EN 4530-001 Aviation series - Sealing fittings for fasteners - Part 001: Technical specifications 

TS EN 4530-002 Aerospace series - Sealed fittings for fasteners - Part 002: List and use of sealing fittings 

TS EN 2591-420 Aviation series-Electrical and optical fasteners, test methods-Part 420-Mechanical strength of rear fittings 

TS EN 2596 Aviation series-Washers-Corrosion-resistant, cadmium-plated radial knurled lock-Dimensions 

TS EN 3475-302 Aviation series-Electrical cables used in aviation-Test methods-Part 302: Tensile strength test 

TS EN 3841-405 Aerospace series - Circuit-breakers - Test methods - Part 405: Liquid resistance 

TS EN 3841-406 Aviation series - Circuit-breakers - Test methods - Part 406: Flammability 

TS ISO 2100 Airplanes - Electrical connectors, tests 

TS ISO 2574 Aircraft - Electric cables - Identification marking 

TS ISO 461-1 Airplanes-Connectors for obtaining electrical energy from the ground-Design, performance and test conditions 

TS EN 3662-001 Aviation series - Circuit-breakers, three-pole, temperature-resistant, with rated current 20 to 50 a - Part 001: Technical specifications

TS EN 3155-059 Aerospace series - Electrical contacts used in fittings - Part 059: Contacts, electrical, coaxial, with 16 dimensions, female, type D, solder, class R Product standard

TS EN 4057-401 Aerospace series - Wiring for harnesses - Test methods - Part 401: Cycle tensile strength

TS EN 2349-414 Aviation series - Specification and test procedures for relays and contactors - Part 414: Mechanical shock 

TS EN 2349-601 Aviation series - Specification and test procedures for relays and contactors - Part 601: Caliper safety distance 

TS EN 3155-044 Aerospace series - Electrical contact for fasteners - Part 044: Contacts, electrical, male 044, type A, twisted pair, class T - Product standard 

TS EN 3155-052 Aerospace series - Electrical contact for fasteners - Part 052: Contacts, electrical, male 052, type a, twisted pair, class s - Product standard 

TS EN 3155-053 Aerospace series - Electrical contact for fasteners - Part 053: Contacts, electrical, female 053, type A, twisted pair, class S - Product standard 

TS EN 3646-001 Aviation series - Fasteners, electrical, circular, with pin connection, operating temperature 175 ° c or 200 ° c continuous - Part 001: Technical specifications 

TS EN 4165-009 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° C - Part 009: Shelf and panel plug for 2 and 4 module, series 3 - Product standard 

TS EN 4165-010 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° C - Part 010: Plug for shelf and panel behind 2 and 4 module, series 2 - Product standard 

TS EN 4165-011 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° C - Part 011: Plug for shelf and panel behind 2 and 4 module, series 3 - Product standard 

TS EN 4165-018 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° C - Part 018: Protective cover for 2 and 4 boxed module, series 2 and series 3 - Product standard 

TS EN 3372-001 Aviation series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, with continuous operating temperature - 65 ° C to 175 ° C or 200 ° C - Part 001: Technical specifications 

TS EN 3372-003 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° C to 175 ° C or 200 ° C - Part 003: Square flange slot - Product standard 

TS EN 3372-006 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° c to 175 ° c or 200 ° c - Part 006: protective cap - Product standard 

TS EN 3372-008 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° C to 175 ° C or 200 ° C - Part 008: Ground spring free stopper found - Product standard 

TS EN 3372-009 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° c to 175 ° c or 200 ° c - Part 009: Housing, clamping nut inserted - Product standard 

TS EN 3372-011 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° C to 175 ° C or 200 ° C - Part 011: Model housing - Product standard

TS EN 3475-601 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 601: Smoke density 

TS EN 3475-602 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 602: Toxicity 

TS EN 3475-704 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 704: Flexibility

TS EN 3375-004 Aviation series - For cable, electrical, digital information transmission - Part 004: Double core - 77 ohm - Type Wj - Product standard 

TS EN 4639-001 Aviation series - Fasteners, optical, angular, modular, multi-connection, with 1,25 mm ferrule, with removable union holder - Part 001: Technical specification 

TS EN 4639-002 Aviation series - Fasteners, optical, angular, modular, multi-connection, with 1,25 mm ferrule, removable union holder - part 002: List of finished standards 

TS EN 4639-004 Aviation series - Fasteners, optical, angular, modular, multi-connection, with 1,25 mm ferrule, with removable union holder - Part 004: Female optical module - Product standard 

TS EN 2591-225 Aerospace series - Electrical and optical components - Test methods - Part 225: Rf high potential withstand voltage 

TS EN 3660-014 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 014: Cable outlet, type a, 90 °, non-sealing, with tension clamp - Product standard 

TS EN 3660-023 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 023: Cable outlet, type A, 90 °, composite, non-sealing, with tension clamp - Product standard 

TS EN 3733-002 Aerospace series - Fastener, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° C - Part 002: List of product standards 

TS EN 3733-003 Aviation series - Coupler, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° C - Part 003: Slot installation for cable according to EN 4532, product standard 

TS EN 3733-101 Aviation series - Fastener, optical, circular, single-channel, connected by self-locking washer, continuous operating temperature up to 150 ° C - Part 101: Protective cover housing - Product standard 

TS EN 3733-105 Aerospace series - Coupler, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° C - Part 105: Disposable housing fastener mounted in two holes - Product standard 

TS EN 3745-705 Aerospace series - Fibers and cables, optics, use in aircraft - Test methods - Part 705: Contrast measurement 

TS EN 4626-002 Aviation series - Connectors, optical, rectangular, multi-contact, chassis and panel, quadrax clearance, 2,5 mm diameter ring - Operating temperatures - 65 ° c to 125 ° c (depending on cable) - Underwater contacts - Part 002: Contact regulations and performance determination 

TS EN 4626-101 Aerospace series - Connectors, optical, rectangular, multi-contact, chassis and panel, quadrax cavity, ring diameter 2,5 mm - Operating temperatures - 65 ° C to 125 ° C (depending on cable) - Underwater contacts - Part 101: Optical contact for plug (subassembly) - Product standard 

TS EN 4604-002 Aviation series - Cable, electrical, for signal transmission - Part 002: General 

TS EN 3155-074 Aerospace series - Electrical contacts for fasteners - Part 074: Contacts, electrical, quadruplex, size 8, male, type e, crimped, class r - Product standard 

TS EN 3373-011 Aerospace series - Connection bolts and in-line connections for bending on electrical fasteners - Part 011: Connection bolts, round shape, nickel-plated, for bending on electrical copper fasteners, temperature for metric and inch stud series 260 ° Up to C - Product standard 

TS EN 3475-417 Aerospace series - Cables, electricity, used in aircraft - Test methods - Part 417: Fire resistance of cables in harness 

TS EN 3475-515 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 515: Impact resistance 

TS EN 3660-018 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 018: Cable outlet, type a, 90 °, non-sealed, with tension clamp - Product standard 

TS EN 3660-021 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 021: Cable outlet, type a, 90 °, non-sealed, with tension clamp - Product standard 

TS EN 3660-026 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 026: Cable outlet, type A, 90 °, non-sealed, with tension clamp to EN 3646 - Product standard 

TS EN 4604-006 Aviation series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohm, 200 ° c, type wm - Product standard 

TS EN 2240-020 Aviation series-Lamps, incandescent filament-Part 020: Lamp, code 311 - Product standard 

TS EN 3660-064 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circle or rectangular shape - Part 064: Cable outlet, type k, straight, for heat shrinkable housing, armored, sealed, to 2997 and 4067 Self-locking - Product standard 

TS EN 2240-005 Aviation series-Lamps, incandescent filament-Part 005: Lamp, code 73 - Product standard 

TS EN 2240-006 Aviation series-Lamps, incandescent filament-Part 006: Lamp, code 73E - Product standard 

TS EN 2240-007 Aviation series-Lamps, incandescent filament-Part 007: Lamp, code 74 - Product standard

TS EN 2240-025 Aviation series-Lamps, incandescent filament-Part 025: Lamp, code 328- Product standard 

TS EN 2240-027 Aviation series-Lamps, incandescent filament-Part 027: Lamp, code 334- Product standard 

TS EN 2240-031 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 356- Product standard 

TS EN 2240-033 Aviation series-Lamps, incandescent filament-Part 033: Lamp, code 377- Product standard 

TS EN 2240-038 Aviation series-Lamps, incandescent filament-Part 038: Lamp, code 401- Product standard 

TS EN 2240-045 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 714- Product standard 

TS EN 2240-049 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 757- Product standard 

TS EN 3660-003 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 003: Shaft seal, type a according to 2997 and 4067 - Product standard

TS EN 3838 Aviation series - Features and tests of user markings on aircraft electrical cables 

TS EN 2283 Aviation series - Aircraft wiring test

TS EN 3475-307 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 307: Corona extinguishing voltage 

TS EN 3475-604 Aerospace series-Cables, electricity, used in aircraft-Test methods-Part 604: Dry arc spreading resistance 

TS EN 3719 Aviation series - Aluminum or aluminum alloy conductors for electrical cables - Product standard

TS EN 3155-045 Aviation series-Fasteners used in electrical contact-Part 045: Communication, electrical, female plug, type A, -double clamping, class T-Product standard 

TS EN 3475-100 Aerospace series - Cables, electrical, aircraft test methods - Part 100: General 

TS EN 2596 Aviation series - Washers, with lock, radial thread, made of corrosion-resistant steel, cadmium-coated, for flight control rods - Dimensions 

TS EN 2997-016 Aviation series - Fasteners, electrical, circular, with threaded ring, flame retardant or durable, operating temperature -65 ° c - 175 ° c continuous, 200 ° c continuous, 260 ° c max - Part 016 : Combined accessory plug-product standard 

TS EN 2240-051 Aviation series-Lamps, incandescent filament-Part 051: Lamp, code 1163- Product standard

TS EN 2240-053: 2011 Aviation series-Lamps, incandescent filament-Part 053: Lamp, code 1308 - Product standard 

TS EN 2240-054 Aviation series-Lamps, incandescent filament-Part 054: Lamp, code 1317 - Product standard 

TS EN 2240-059 Aviation series-Lamps, incandescent filament-Part 059: Lamp, code 1591 - Product standard 

TS EN 2240-060 Aviation series-Lamps, incandescent filament-Part 060: Lamp, code 1619 - Product standard 

TS EN 3475-603 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 603: Resistance to wet arc tracking 

TS EN 2240-061 Aviation series-Lamps, incandescent filament-Part 061: Lamp, code 1683 - Product standard 

TS EN 2240-062 Aviation series-Lamps, incandescent filament-Part 062: Lamp, code 1810 - Product standard " 

TS EN 2240-065 Aviation series-Lamps, incandescent filament-Part 061: Lamp, code 1683 - Product standard " 

TS EN 2240-066 Aviation series-Lamps, incandescent filament-Part 061: Lamp, code 1683 - Product standard 

TS EN 2240-067: 2011 Aviation series-Lamps, incandescent filament-Part 067: Lamp, code 1843 - Product standard " 

TS EN 2240-068 Aviation series-Lamps, incandescent filament-Part 068: Lamp, code 1864 - Product standard " 

TS EN 2240-069 Aviation series-Lamps, incandescent filament-Part 069: Lamp, code 1978 - Product standard " 

TS EN 2240-070 Aviation series-Lamps, incandescent filament-Part 070: Lamp, code 2232 - Product standard " 

TS EN 3155-002 Aerospace series - Electrical contacts for fasteners - Part 002: List and use of contacts 

TS EN 4008-007 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 007: Positioner for the bending tool m22520 / 2-01 - Product standard 

TS EN 2240-071 Aviation series-Lamps, incandescent filament-Part 071: Lamp, code 3011 - Product standard 

TS EN 2240-072 Aviation series-Lamps, incandescent filament-Part 072: Lamp, code 3912 - Product standard 

TS EN 2240-073 Aviation series-Lamps, incandescent filament-Part 073: Lamp, code 4174 - Product standard 

TS EN 2240-075 Aviation series-Lamps, incandescent filament-Part 075: Lamp, code 5448 - Product standard 

TS EN 2240-078 Aviation series-Lamps, incandescent filament-Part 078: Lamp, code 6838 - Product standard 

TS EN 2240-080 Aviation series-Lamps, incandescent filament-Part 080: Lamp, code 7007-704 - Product standard 

TS EN 2240-081 Aviation series-Lamps, incandescent filament-Part 081: Lamp, code 7070 - Product standard 

TS EN 2240-082 Aviation series-Lamps, incandescent filament-Part 082: Lamp, code 7079 - Product standard 

TS EN 2240-083 Aviation series-Lamps, incandescent filament-Part 083: Lamp, code 7152- Product standard 

TS EN 2240-084 Aviation series-Lamps, incandescent filament-Part 084: Lamp, code 7153- Product standard 

TS EN 2240-085 Aviation series-Lamps, incandescent filament-Part 085: Lamp, code 7265- Product standard 

TS EN 2240-086 Aviation series-Lamps, incandescent filament-Part 086: Lamp, code 7333- Product standard 

TS EN 2240-087 Aviation series-Lamps, incandescent filament-Part 087: Lamp, code 7341- Product standard 

TS EN 2240-088 Aviation series-Lamps, incandescent filament-Part 088: Lamp, code a7512-12- Product standard 

TS EN 2240-089 Aviation series-Lamps, incandescent filament-Part 089: Lamp, code a7512-24- Product standard 

TS EN 2240-090 Aviation series-Lamps, incandescent filament-Part 090: Lamp, code 7683- Product standard 

TS EN 2240-091 Aviation series-Lamps, incandescent filament-Part 091: Lamp, code 7714- Product standard 

TS EN 2240-092 Aviation series-Lamps, incandescent filament-Part 092: Lamp, code 7715- Product standard 

TS EN 2240-092 Aviation series-Lamps, incandescent filament-Part 092: Lamp, code 7715- Product standard 

TS EN 2240-093 Aviation series-Lamps, incandescent filament-Part 093: Lamp, code 7839- Product standard 

TS EN 2240-094 Aviation series-Lamps, incandescent filament-Part 094: Lamp, code 8022- Product standard 

TS EN 2240-095 Aviation series-Lamps, incandescent filament-Part 095: Lamp, code 8552- Product standard 

TS EN 2240-096 Aviation series-Lamps, incandescent filament-Part 096: Lamp, code 72301-6- Product standard 

TS EN 2240-097 Aviation series-Lamps, incandescent filament-Part 097: Lamp, code 72601-12- Product standard 

TS EN 2240-098 Aviation series-Lamps, incandescent filament-Part 098: Lamp, code 416650- Product standard 

TS EN 2240-099 Aviation series-Lamps, incandescent filament-Part 099: Lamp, code 416700- Product standard 

TS EN 4612-003 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or screened and sheathed - Part 003: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Single extruded wall, unshielded jacket for outdoor applications - UV laser printable - Product standard 

TS EN 4612-002 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 002: General 

TS EN 4612-004 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or screened and sheathed - Part 004: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Single extruded wall, screened (braided) and sheath-UV laser printing for open applications - Product standard 

TS EN 4612-005 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or screened and sheathed - Part 005: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Double extruded wall for outdoor applications, non-shielded sheath-UV laser printing can be done - Product standard 

TS EN 4612-006 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or screened and sheathed - Part 006: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Double extruded wall, screened (braided) and sheath-UV laser printing for open applications - Product standard 

TS EN 4612-007 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 007: Silver-plated copper - Operating temperature - 65 ° c and 150 ° c - Single extruded wall, unshielded jacket for outdoor applications - UV laser printable - Product standard 

TS EN 4612-008 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 008: Silver-plated copper - Operating temperature - 65 ° c and 150 ° c - Single extruded wall, sheathed and screened (for braided) for outdoor applications - UV laser printing possible - Product standard 

TS EN 4612-009 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 009: Silver-plated copper - Operating temperature - 65 ° c and 150 ° c - Double extruded wall for outdoor applications, non-shielded sheath-UV laser printing can be done-Product standard

TS EN 4612-010 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 010: Silver-plated copper - Operating temperature - 65 ° c and 150 ° c - Double extruded wall, sheathed and screened (braided) for outdoor applications - UV laser printing possible - Product standard 

TS EN 4612-011 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 011: Nickel plated copper - Operating temperature - 65 ° c to 150 ° c - Double extruded wall for outdoor applications, non-shielded sheath-UV laser printing can be done-Product standard 

TS EN 4612-012 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 011: Nickel plated copper - Operating temperature - 65 ° c to 150 ° c - Double extruded wall, sheathed and screened (braided) for outdoor applications - UV laser printing possible - Product standard 

TS EN 4612-013 Aerospace series - Cables for electrical, general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 012: Sx, tc and three nickel-plated copper - Operating temperature - 65 ° c and 150 ° c - Single extruded wall, sheathed and screened (braided) for equipment only - UV laser printable - Product standard 

tst EN 4612-002: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 002: General  

TS EN 4644-003 Aviation series - Fasteners, electrical and optical, rectangular, modular, with rectangular studs, continuous operating temperature 175 ° c - Part 003: Rectangular studs - Product standard 

TS EN 4644-003 Aviation series - Fasteners, electrical and optical, rectangular, modular, with rectangular studs, continuous operating temperature 175 ° c (or 125 ° c) - Part 003: Rectangular studs - Product standard 

TS EN 3375-002 Aviation series - for cable, electrical, digital data transmission - Part 002: General 

TS EN 4608-003 Aviation series - Cable, electrical, fire-resistant - Single and twisted multi-core layout, screened (knitted) and sheathed - Operating temperature - 65 ° c to 260 ° c - Part 003: Dn family - lightweight - UV laser printable - Product standard 

TS EN 4608-005 Aviation series - Cable, electrical, fire-resistant - Single and twisted multi-core layout, shielded (knitted) and sheathed - Working temperature - 65 ° c to 260 ° c - Part 005: Dw family - Data two-core gauge 24 for laser transmission - Printable with UV laser - Product standard 

TS EN 4611-002 Aviation series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 002 - General 

TS EN 4611-003 Aerospace series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 003 - Tin-plated copper - Operating temperature - 65 ° c to 135 ° c - Single outlet for closed applications - Can be printed with UV laser - Product standard 

TS EN 4611-004 Aerospace series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 004: Tin-plated copper - Operating temperature - 65 ° c to 135 ° c - Dual outlet for closed applications - Can be printed with UV laser - Product standard 

TS EN 4611-005 Aerospace series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 005: Silver-plated copper - Operating temperature - 65 ° c to 150 ° c - Single outlet for closed applications - Can be printed with UV laser - Product standard 

TS EN 4611-006 Aerospace series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 006: Silver-plated copper - Operating temperature - 65 ° c to 150 ° c - Dual outlet for open applications - Can be printed with UV laser - Product standard 

TS EN 4611-007 Aviation series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 007: Nickel-plated copper - Operating temperature - 65 ° c to 150 ° c - Dual outlet for open applications - Can be printed with UV laser - Product standard 

TS EN 4611-008 Aviation series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 008: Bp - Nickel plated copper - Operating temperature - 65 ° c to 150 ° c - High vibration, cable output point for open applications with additional protection in areas with bending and fluid contamination - Printable with UV laser - Product standard 

TS EN 4611-009 Aviation series - Cables, electrical, for general purposes, single and multi-core construction - Xletfe family - Part 008: Bj - Nickel plated copper - Operating temperature - 65 ° c to 150 ° c - High vibration, cable single point of use for equipment in areas with bending and fluid contamination or as cable core - Printable with UV laser - Product standard 

TS EN 4704 Aviation series - Tartaric-Sulfuric acid (tsa) anodizing aluminum and machined aluminum alloys for corrosion protection and paint pretreatment 

TS EN 2240-100: 2011 (EN) Aviation series-Lamps, incandescent filament-Part 100: Lamp, code 2078- Product standard 

TS EN 2240-101 Aviation series-Lamps, incandescent filament-Part 101: Lamp, code 404-02- Product standard 

TS EN 3155-076 Aviation series - Electrical contacts for fasteners - Part 076: Contacts, electrical, male, type a, bent, class r - Product standard 

TS EN 3155-077 Aerospace series - Electrical contacts for fasteners - Part 077: Contacts, electrical, female, type a, bent, class r - Product standard

TS EN 3155-035 Aerospace series - Electrical contacts for fasteners - Part 035: Contacts, electrical, three-way, size 08, female, type d, inclined, class r - Product standard 

TS EN 3475-505 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 505: Tensile test on conductive hands and fasteners 

TS EN 4644-133 Aviation series - Fasteners, electrical and optical, rectangular, modular, with rectangular studs - Operating temperature 175 ° C (or 125 ° C) continuous - Part 133: Size for shelf and panel application 3 enclosure - Product standard 

TS EN 4644-141 Aviation series - Fasteners, electrical and optical, rectangular, modular, with rectangular studs - Operating temperature 175 ° c (or 125 ° c) continuous - Part 141: Size for shelf and panel application 3 plug - Product standard

4612-003: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLETFE Family - Sheathed or shielded and sheathed - Part 003: Tin-plated copper - Operating temperature - 65 ºC and 135 ºC - Single extruded protection for outdoor applications, with unshielded sheath - UV laser printable - Product standard 

TS EN 4612-002 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLETFE FAMILY - Sheathed or shielded and shielded - Part 002: General 

TS EN 4612-004 Aerospace series - Cables, electrical, for general purposes, single and multi-core - XLETFE family - Sheathed or shielded and sheathed - Part 004: Tin-plated copper - Operating temperature - Between 65 ° C and 135 ° C - Single extruded protection for open applications, screened and sheathed (mesh) - UV laser printable - Product standard 

4612-005: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLETFE family - Sheathed or shielded and shielded - Part 005: Tin-plated copper - Operating temperature - 65 ° C and 135 ° C - Double extruded protection for open applications, unshielded and sheathed - UV laser printable - Product standard 

TS EN 4612-006 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLETFE Family - Sheathed or shielded and sheathed - Part 006: Tin-plated copper - Operating temperature -65 ° C to 135 ° C - Dual extruded protection, shielded (braided) and sheathed for outdoor applications - UV laser printable - Product standard 

TS EN 4612-007 Aerospace series - Cables, electrical, general purpose, single and multi-core XLETFE Family - Sheathed or shielded and sheathed - Part 007: Silver-plated copper - Operating temperature - Between 65 ° c and 150 ° c - Single-extruded protection for outdoor applications, unshielded sheath - UV laser printable - Product standard 

TS EN 4612-008 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLETFE Family - Sheathed or shielded and shielded - Part 008: Silver-plated copper - Operating temperature - Between 65ºC and 150ºC - For outdoor applications single extruded protection, screened and sheathed (braided) - UV laser printable - Product standard 

TS EN 4612-009 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLEFTE Family - Sheathed or shielded and shielded - Part 009: Silver-plated copper - Operating temperature - 65 ° C to 150 ° C - Double extruded protection for outdoor applications, with no screen sheath - UV laser printable - Product standard 

TS EN 4612-010 Aerospace series - Cables for electrical, general cables, electrical, for general purposes, single and multi-core - XLEFTE Family - Sheathed or shielded and sheathed - Part 010: Silver plated copper - Operating temperature - 65 oC and 150 oC - Double extruded protection for outdoor applications, sheathed and screened (braided) - UV laser printing possible - Product standard 

TS EN 4612-011 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLETFE Family - Sheathed or shielded and sheathed - Part 011: Nickel-plated copper - Operating temperature -65 ° C to 150 ° C - Open extruded protection, non-shielded sheath for all applications - UV laser printing possible - Product standard 

4612-012: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - XLETFE family - Sheathed or shielded and sheathed - Part 012: Nickel plated copper - Operating temperature - 65 ° C and 150 ° C - Double extruded protection for open applications, shielded sheath - UV laser printable - Product standard 

TS EN 4612-013: 2011 Aviation series - Cables, electrical, general purpose, single and multi-core XLETFE Family sheathed or screened and sheathed - Part 013: SX, TC and UC - Nickel plated copper - Operating temperature - 65 ° C and 150 ° C - Only extruded protection for the equipment, shielded and shielded (Helix) - UV laser printable - Product Standard 

TS EN 4644-001 Aviation series - Fasteners, electrical and optical, rectangular, modular, rectangular studs, continuous operating temperature 175 ° c (or 125 ° c) - Part 001: Technical specifications

TS EN 4677-001 Aircraft series - Welded and brazed connections for aerospace applications - Matte material connections welded with electron beam - Part 001: Quality of welded connections 

TS EN 2997-003 Aerospace series - Fasteners, electrical, circular, with threaded ring, refractory or non-durable operating temperature - continuous between 65 ° C and 175 ° C, continuous 200 ° C, maximum section 260 ° C 3: Square flange housing - Product standard

TS EN 3745-301: 2012 (EN) Aviation series-Wires and cables, optics, used in aircraft; Test methods-Section 301: Attenuation

TS EN 4531-002 Aviation series - Fasteners, optical, circular, single and multi-ended, connected by threaded bushings - Earthed contacts - Part 002: Performance characteristics and contact patterns

TS EN 4531-003 Aviation series - Fasteners, optical, circular, single and multi-ended, connected by threaded bushings - Grounded contacts - Part 003: Square flange housing - Product standard 

TS EN 4531-004 Aviation series - Fasteners, optical, circular, single and multi-ended, connected by threaded bushings - Earthed contacts - Part 004: Clamping nut holder - Product standard 

TS EN 4531-005: 2012 (EN) Aviation series - Fasteners, optical, circular, single and multi-ended, connected by threaded bushings - Grounded contacts - Part 005: Plug - Product standard

TS EN 4531-901 Aerospace series - Fasteners, optical, circular, single or multi-ended, threaded with triple start gasket - Embedded connections - Part 901: Filler plugs - Product standard 

TS EN 3475-603 / AC Aviation series - Cables, electrical, used in aircraft - Test methods - Part 603: Resistance to wet arc tracking 

TS EN 6059-100 Aviation series-Electrical cables, installation-Protection sleeves-Test methods-Part 100: General 

TS EN 4644-131 Aviation series - Fasteners, electrical and optical, rectangular, modular, with rectangular studs - Operating temperature 175 ° c (or 125 ° c) continuous - Part 131: Size for shelf and panel applications 3 plug - Product standard 

TS EN 6049-006: 2012 (EN) Aviation series-Electrical cables, installation-Protection sleeve on metaramid fibers-Part 006: Self-folding protective sleeve, flexible installation - Product standard 

TS EN 6049-007 Aerospace series - Electrical cables, installation - Protection sleeve on metaramid fibers - Part 007: Self-folding protective sleeve, flexible installation with operating temperature - 55 ° c to 260 ° c - Product standard 

TS EN 6059-503 Aerospace series - Electrical cables, installation - Protection sleeve - Part 503: Temperature increase due to rated current on the sleeve 

TS EN 4531-901 Aviation series - Fasteners, optical, circular, single and multi-ended, connected with threaded triple start gasket - Embedded contacts - Part 901: Filler plugs - Product standard

TS EN 4531-003 Aerospace series - Fasteners, optical, circular, single and multi-ended - Connected with three threaded ring - Embedded contacts - Part 003: Square flange plug - Product standard 

TS EN 4531-004 Aviation series - Fasteners, optical, circular, single and multi-ended - Connected with a three-ring threaded ring - Embedded contacts - Part 004: Plug socket with clamping nut - Product standard 

TS EN 4531-005 Aerospace series - Fasteners, optical, circular, single and multi-ended - Connected with a three-ring threaded ring - Embedded contacts - Part 005: Plug - Product standard 

TS EN 4531-101 Aviation series - Fasteners, optical, circular, single and multi-ended, connected by a three-ring threaded ring - Grounded contacts - Part 101: - For EN 55-125 cable at 4641 ° C to 100 ° C optical contact - Product standard 

TS EN 4644-001 Aviation series - Fasteners, electrical and optical, rectangular, modular, rectangular inlet connections, continuous operating temperature 175 ° C (or 125 ° C) - Part 001: Technical specifications

TS EN 4644-131 Aerospace series - Fasteners, electrical and optical, rectangular, modular, rectangular inlet connections, continuous operating temperature 175 ° C (or 125 ° C) - Part 131: 3 size plug for shelf and panel applications - Finished goods standard 

TS EN 4644-133 Aviation series - Fasteners, electrical and optical, rectangular, modular, rectangular inlet connections, continuous operating temperature 175 ° C (or 125 ° C) - Part 133: 3 size socket for shelf and panel applications - Product standard 

TS EN 4644-141 Aviation series - Fasteners, electrical and optical, rectangular, modular, rectangular inlet connections, continuous operating temperature 175 ° C (or 125 ° C) - Part 141: 4 size plug for shelf and panel application - Product standard

TS EN 4644-131 Aerospace series - Fasteners, electrical and optical, rectangular, modular, rectangular inlet connections, continuous operating temperature 175 ° C (or 125 ° C) - Part 131: 3 size plug for shelf and panel applications - Finished goods standard 

TS EN 4644-133 Aviation series - Fasteners, electrical and optical, rectangular, modular, rectangular inlet connections, continuous operating temperature 175 ° C (or 125 ° C) - Part 133: 3 size socket for shelf and panel applications - Product standard 

TS EN 4644-141 Aviation series - Fasteners, electrical and optical, rectangular, modular, rectangular inlet connections, continuous operating temperature 175 ° C (or 125 ° C) - Part 141: 4 size plug for shelf and panel application - Product standard

TS EN 2267-002 Aviation series - Cables, electrical, for general purposes - Operating temperature from -55 ° c to 260 ° c - Part 002: General 

TS EN 2591-214 Aerospace series - Electrical and optical components - Test methods - Part 214: Lightning strike, current and voltage impact

TS EN 3682-003 Aviation series - Fasteners, plugs and housings, electrical, rectangular, replaceable stud type, from shelf to panel, with continuous operating temperature 150 ° c - Part 003: Studs - Product standard 

TS EN 3682-004 Aviation series - Fasteners, plug and socket, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 004: Size 2 slot - Product standard 

TS EN 4681-001 Aerospace series - Cables, electrical, for general matches, with aluminum or copper conductors - Coating aluminum - Part 001: Technical specifications 

TS EN 4681-002 Aerospace series - Cables, electrical, for general matches, with aluminum or copper conductors - Coating aluminum - Part 002: General 

TS EN 2242 Aerospace series - Crimping of electrical cables with conductors defined in EN 2083, EN 4434 and EN 2346 

TS 6681 Airplanes-Flameproof electrical cables-Dimensions, conductor resistances and masses  

TS 7612 Aircraft-Sensitive fuses with fused wire-General rules  

TS 8128 Aircraft-Electrical terminal connection systems section 2-Experiments  

TS 8744 Airplanes - General purpose push - washer (push - pull) single pole circuit breakers - Dimensions  

TS 8974 Electric cables - Used in aircraft - Compressed connections  

TS EN 2591-307 Aerospace series - Test methods for electric and optical fasteners section 307: Salt mist 

TS EN 2591-402 Aerospace series - Test methods for electric and optical fasteners section 402: Shock 

TS EN 2591-403 Aerospace series - Test methods for electric and optical fasteners section 403: Sinusoidal and random vibration 

TS EN 2267-009 Aerospace series - Cables, electrical, for general purposes - Operating temperature -55 ° c to 260 ° c - Part 009: Dra family, single and multi-core - Product standard 

TS EN 3645-001 Aviation series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 001: Technical specifications 

TS EN 3660-025 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 025: Cable outlet, type a, straight, unsealed, with tension clamp according to 3646 - Product standard 

TS EN 3660-027 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 027: Cable outlet, type a, 45 °, unsealed, with clamp clamp according to 3646 - Product standard 

TS EN 3660-038 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 038: Manual installation tool, style Z, cable outlet accessories EN 3660-033 for stainless steel shield termination tape installation - Product standard 

TS EN 3682-005 Aviation series - Fasteners, plug and socket, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 005: Size 2 plug - Product standard 

TS EN 3682-006 Aviation series - Fasteners, plug and socket, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 006: Size 3 slot - Product standard 

TS EN 3682-007 Aviation series - Fasteners, plug and socket, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 007: Size 3 plug - Product standard 

TS EN 3682-008 Aviation series - Fasteners, plug and socket, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 008: Size 4 slot - Product standard 

TS EN 4199-001 Aviation series - Tie-down strips for aircraft - Part 001: Technical specifications 

TS EN 6049-008 Aerospace series -Electrical cables, installation -Protection sleeve on metaramid fibers-Section 008: Nickel copper braid, flexible post-installation operating temperature Self-winding protection (EMI) protective sleeve - 55 ° C

TS EN 4641-104 Aerospace series - Cables, optical, 125 µm diameter sheath - Part 103: Semi-loose, hardened double construction, 62,5 / 125 µm strength fiber, 4,95 mm nominal outer diameter - Product standard 

TS EN 3645-002 Aerospace series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection, with continuous operating temperature 175 ° C or 200 ° C - Part 002: Performance specifications and contact regulations - Product standard 

TS EN 3645-004 Aerospace series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection with continuous operating temperature 175 ° C or 200 ° C - Part 004: socket, hermetic, square flange mounting - Product standard 

TS EN 3645-006 Aerospace series - Fasteners, electrical, circular, non-displaceable, with three threaded threaded connections, with continuous operating temperature 175 ° C or 200 ° C - Part 006: Protective cover for socket - Product standard

TS EN 3645-010 Aviation series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection, with continuous operating temperature 175 ° C or 200 ° C - Part 010: socket, hermetic, round flange, compression nut mounting - Product standard 

TS EN 3645-007 Aerospace series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection with continuous operating temperature 175 ° C or 200 ° C - Part 007: Protective cover for plug - Product standard. 

TS EN 3645-009 Aviation series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection, with continuous operating temperature 175 ° C or 200 ° C - Part 009: socket, round flange, compression nut assembly - Product standard 

TS EN 3645-011 Aerospace series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection with continuous operating temperature 175 ° C or 200 ° C - Part 011: Cord plug with earthing terminals - Type 1 - Product standard 

TS EN 3645-012 Aerospace series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection with continuous operating temperature 175 ° C or 200 ° C - Part 012: Cord plug with earthing terminals - Type 2 - Product standard 

TS EN 3645-013 Aerospace series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection with continuous operating temperature 175 ° C or 200 ° C - Part 013: Auxiliary socket - Product standard 

TS EN 3646-004: 2013 Aviation series - Fasteners, electrical, circular, wedge connection, continuous operating temperature 175 ° c or 200 ° c - Part 004: Housing, clamping 

TS EN 3373-007: 2012 (EN) Aviation series - Connection bolts and in-line connections for bending on electrical fasteners - Part 007: Nickel-plated fasteners for bending on nickel-plated aluminum cable for series studs - Product standard 

TS EN 60952-1 Aircraft coils - Part 1: General test rules and operational quality levels 

TS EN 60952-2 Aircraft batteries section 2: Design and manufacturing guidelines 

TS EN 60952-3 Aircraft batteries Section 3: Declaration of product characteristics and design and performance (DDP) 

TS EN 3645-001 Aviation series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection, with continuous operating temperature 175 ° C or 200 ° C - Part 001: Technical specifications

TS EN 3645-005 Aerospace series - Fasteners, electrical, circular, non-displaceable, three-threaded threaded connection with continuous operating temperature 175 ° C or 200 ° C - Part 005: socket, hermetic, round flange, tight fitting - Product standard 

TS EN 2267-010 Aerospace series - Cables, electrical, for general purposes - Operating temperature -55 ° c to 260 ° c - Part 010: Dr family, suitable for single uv laser writing - Product standard 

TS EN 2346-005 Aerospace series - Fire resistant electric cable with operating temperature -65 ° C to 260 ° C - Part 005 - Single UV laser printable and multi-core mounted DW family - Light weight - Product standard 

TS EN 2665-001 Aviation series - Circuit-breakers, three-pole, temperature balanced rated currents 20a - 50 a - Part 001: Technical specifications 

TS EN 2665-004 Aviation series - Circuit-breakers, three-pole, temperature-balanced, rated currents 20 a - 50a part 4: Unc threaded terminals - Manufacturing standard 

TS EN 3155-065 Aerospace series - Electrical contacts for fasteners - Part 065: Contacts, electrical, male, type a, inclined, class s, size 8 - Product standard 

TS EN 3682-001 Aviation series - Fasteners, plugs and housings, electrical, rectangular, with replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 001: Technical specifications 

TS EN 3682-002 Aviation series - Fasteners, plugs and housings, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 002: Performance characteristics and contact patterns 

TS EN 3155-066 Aerospace series - Electrical contacts for fasteners - Part 066: Contacts, electrical, female, type a, inclined, class s, size 8 - Product standard 

TS EN 2794-001 Aviation series - Circuit breakers, single pole, temperature balanced, rated currents 20a - 50 part 001: Technical specifications 

TS EN 2794-004 Aerospace series circuit-breakers, single pole, temperature balanced, rated currents 20 a - 50 a - Part 004: Unc threaded terminals - Imam standard 

TS EN 4531-002 Aviation series - Fasteners, optical, circular, single and multi-ended, connected by a three-ring threaded ring - Embedded contacts - Part 002: Performance characteristics and contact patterns 

TS EN 3773-004: 2014 Air-Space series - Circuit-breakers, single-pole-temperature compensated, rated currents 1 A-25 A-Part 004: UNC threaded inserts - product standard 

TS EN 3774-001: 2014 Air-space series - Circuit-breakers, three-pole-temperature compensated, rated currents 1 A-25 A-Part 001: Technical Specification 

TS EN 16602-70-26: 2014 Space product assurance - Bending of high-reliability electrical connections 

TS EN 3773-001: 2014 Air-Space series - Circuit-breakers, single-pole-temperature compensated, rated currents 1 A-25 A-Part 001: Technical Specification 

TS EN 3475-514: 2014 Aviation series - Electrical cables used in aircraft - Test methods - Part 514: Porosity of the copper coating on aluminum wires 

TS EN 4057-402: 2014 Aviation series - Cable ties for harness holders - Test methods - Part 402: Life cycle 

TS EN 4199-003: 2014 Aviation series - Connection flanges for airplanes - Part 003: Tin-plated, flat-braided conductor connection flange mounts - from 65 ° C to 150 ° C and copper, nickel-coated - Product standard 

TS EN 4651: 2014 Aviation series - Copper-plated aluminum alloy conductors for electrical cables - Product standard 

TS EN 4708-001: 2014 Aviation series - Heat-shrinkable insulating coating for bonding, insulation and promotion - Part 001: Technical specification 

TS EN 6059-406: 2014 Aviation series - Mounting of electrical cables - Protective sleeves - Test methods - Part 406: Vibration 

TS EN 6059-601: 2014 Aviation series - Electrical wiring assembly - Protective sleeves - Test methods - Part 601: Open and closed 

TS EN 6059-502 Aviation series - Electrical wiring, installation - Protective sleeves - Test methods - Part 502: Resistance to electrical arcs 

TS EN 2997-009 Aviation series - Fasteners, electrical, circular, with threaded ring, fire-resistant or non-durable operating temperature 65- 175 ° c continuous, 200 ° c continuous, 260 ° c max. Section 9: Protective cover for housing - Product standard 

TS EN 2997-010 Aerospace series - Connectors, electrical, circular, with threaded rings, refractory or non-refractory, operating temperatures - Part 010: Protective cap for socket - Product standard 

TS EN 3155-070 Aerospace series - Electrical contacts for connecting elements - Part 070: Contacts, electrical, male, type A, bent, class S - Product standard 

TS EN 3155-071 Aviation series - Electrical contacts for connecting elements - Part 071: Contacts, electrical, female, type A, bent, class S - Product standard 

TS EN 3475-411 Aerospace series - Cables, electrical, for use in aircraft - Test methods - Part 411: Fluid resistance 

TS EN 3545-005 Aviation series - Connectors, electrical, rectangular, insulated or uninsulated back end, plastic housing, locking device, operating temperatures -55 ° C to 175 ° C - Part 005: Free housing (socket) mounting system - Product standard 

TS EN 3545-007 Aviation series - Connectors, electrical, rectangular, insulated or uninsulated back end, plastic housing, locking device, operating temperatures -55 ° C to 175 ° C - Part 007: Cable clamp - Product standard 

TS EN 3716-004 Aerospace series - Fasteners, with one-way, three-axis interface, for the transmission of digital data - Part 004: Solder plug - Product standard

TS EN 4199-004 Aviation series - Lashing straps for aircraft - Part 004: Round lashing straps, copper, tin plated from -65 ° C to 150 ° C and nickel from -65 ° C to 260 ° C coated - Product standard

TS EN 3155-078 Aerospace series - Electrical contacts for connecting elements - Part 078: Contact size for EN 2997 22, electrical, male, type A, bent, class S - Product standard 

TS EN 3155-079 Aerospace series -Electrical contacts for connecting elements - Part 079: Contact size for EN 2997 22, electrical, female, type A, bent, class S, Product standard 

TS EN 3155-080 Aerospace series - Electrical contacts for connecting elements - Part 080: Contact size for EN 2997 22, electric, male, type A, bent, class T - Product standard 

TS EN 3155-081 Aerospace series - Electrical contacts for connecting elements - Part 081: Contact size for EN 2997 22, electrical, female, type A, bent, class T - Product standard 

TS EN 6059-308 Aviation series - Electrical wiring, assembly - Protective sleeves - Test methods - Part 308: Rapid temperature change 

TS EN 6059-504 Aviation series - Electrical cables, assembly - Protective sleeves - Test methods - Part 504: Temperature rise in the fabric caused by self-heating when protected by a sleeve 

TS EN 4056-002 Aviation series - Cable fasteners - Part 002: Product standards index 

TS EN 4056-006 Aviation series - Cable fittings - Part 006: Concealed cable connections - Operating temperature from 55 ° C to 240 ° C - Product standard 

TS EN 4056-004 Aerospace series - Cable connections for belts - Part 004: Plastic cable connections - Operating temperatures from 55 ° C to 105 ° C and - from 55 ° C to 150 ° C - Product standard 

TS EN 2593-001 Aviation series - Pedestals, 10 A, electromagnetic, relay-mountable, bipolar and quadrupole, double bent - Part 001: Specification 

TS EN 6049-005 Aerospace series - Electrical cables, routing - Protective ring with meta-aramid fibers Part 005: Flexible ring, after insertion - Product standard 

TS EN 4008-018 Aerospace series - Electrical and optical fasteners - Cable clamp and related accessories - Part 018: Cable clamp positioner M22520 / 2-01 - Product standard 

TS EN 3774-004 Aerospace series - Circuit-breakers, three-pole, heat-resistant, rated currents 1 A to 25 A - Part 004: UNC threaded terminals - Product standard 

TS EN 3645-003 Aerospace series - Fasteners, electrical, circular, pull-out protection, threaded coupling for three-state operation, operating temperature 175 ° C or 200 ° C continuous - Part 003: Installation of electrical socket with input flange square flange - Product standard 

TS EN 3645-008 Aerospace series - Fasteners, electrical, circular, pull-out protection, threaded coupling for three-state operation, operating temperature 175 ° C or 200 ° C continuous - Part 008: Non-disconnecting plug with earthing ring - Product standard 

TS EN 4674-002 Aviation series - Electrical wiring, assembly - Self-winding (EMI) protective sleeve - Part 002: Product standard overview and parts list 

TS EN 4674-003 Aerospace series - Electrical wiring, assembly - Self-winding protective sleeve (EMI) - Part 003: Open sleeve - Internal pressurized area - EMI protection 5 kA - Temperature range - 65 ° C to 200 ° C up to - Product standard 

TS EN 4674-004 Aviation series - Electrical wiring, assembly - Self-winding protective sleeve - Part 004: Open sleeve - External pressurized area - EMI protection 5 kA - Temperature range - 65 ° C to 200 ° C - Product standard 

2714-014: 2714 Aviation Series - Single and Multi-Core Electrical Cables for General Purposes - Operating Temperatures - Between 014 ° C and 2016 ° C - Part 55: DR Family, 260 to 014 Core, Striped, Shielded (braided) and Sheathed, UV Laser Printable - Product Standard 

TS EN 2997-002 Aviation Series - Sockets, Electrical, Circular, Threaded, Non-Fire Resistant, Operating Temperature - 65 ° C to 175 ° C Continuous, 200 ° C Continuous, 260 ° C Peak Value - Part 002: Specification for Performance and Contact Schemes 

TS EN 2997-005 Aviation Series - Sockets, Electrical, Circular, Threaded, Non-Fire Resistant, Operating Temperature - 65 ° C to 175 ° C Continuous, 200 ° C Continuous, 260 ° C Peak Value - Part 005: Hermetic Square Flange Electrical Outlet - Product Standard 

TS EN 2997-007 Aviation Series - Sockets, Electrical, Circular, Threaded, Non-Fire Resistant, Operating Temperature - 65 ° C to 175 ° C Continuous, 200 ° C Continuous, 260 ° C Peak Value - Part 007: Round Flange Hermetic Electrical Outlet with Solder and Weld - Product Standard 

TS EN 3155-001 Aviation Series - Electrical Contact for Connection of Elements - Part 001: Technical Specification 

TS EN 3375-007 Aviation Series - Electrical Cable for Digital Data Communication - Part 007: Double Braided - 77 Ohm - Type WW - Product Standard 

TS EN 3375-009 Aviation Series - Power Cord for Digital Data Communication - Part 009: Single Strand - Controller Area Bus Network - 120 Ohm - Type WX - Product Standard 

TS EN 4056-003 Aviation Series - Cable Ties for Belts - Part 003: Plastic Cable Ties - Operating Temperatures -65 ° C to 105 ° C and -65 ° C to 150 ° C - Product Standard 

TS EN 4165-013 Aviation series - Connectors, electrical, rectangular, modular - Operating temperature 175 ° C continuous - Part 013: Cable clamp for sockets with 2 and 4 modules, 2 and 3 series - Product standard 

TS EN 2714-002 Aviation series - Cables, electrical, single or multi-core cable for general purposes - Operating temperature between 55 ° C and 260 ° C - Part 002: Shielded and shielded - General 

TS EN 4644-002 Aviation series - socket, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ° C (or 125 ° C) continuous - Part 002: Performance and contact arrangements 

TS EN 4644-142 Aerospace series - socket, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 ° C (or 125 ° C) continuous - Part 142: Size 4 for socket roof and panel applications, class C and class D - Product standard 

TS EN 6059-202 Aviation series - Installation of electrical cables - Protective sleeves - Test methods - Part 202: Dimensions and mass 

TS EN 2713-012 Aerospace series - Cables, electrical, for general purposes, single and multi-core, - used in the temperature range 55 ° C and 200 ° C 

TS EN 3375-011 Aviation series - Power cable for digital data transmission - Part 011: Single braided - Star quartet 100 ohm- light - Type KL- Product standard 

TS EN 3646-005 Aviation series - Connectors, electrical, circular, with nut coupling, with continuous operating temperature 175 ° C or 200 ° C - Part 005: Lampholder, hermetic, square connection flange - Product standard 

TS EN 3745-510 Aerospace series - Aircraft fiber optics and cables - Test methods - Part 510: Bending test 

TS EN 4008-003 Aerospace series - Electrical and optical fasteners - Clamping tools and related accessories M22520 / 2-01 - Product standard 

TS EN 4165-024 Aviation series - 175 ° C connectors with continuous operating temperature, rectangular, electrical, modular - Part 024: Single module plug - Product standard 

TS EN 4165-025 Aviation series - Connectors, electrical, rectangular, modular - 175 oC with continuous operating temperature ölSection 025: Single module socket - Product standard 

TS EN 4604-009 Aviation series - Cable, electrical, signal transmission - Part 009: Cable coaxial, lightweight, 50 ohm, 180 ° C, type KW (light WN) - Product standard 

TS EN 4604-010 Aviation series - Cable, electrical, signal transmission - Part 010: Cable coaxial, lightweight, 50 ohm, 200 ° C, type KX (light WD) - Product standard 

TS EN 4674-001 Aviation series - Electrical cables, installation, protective sleeve (EMI) self-enveloping shield - Part 001: Technical specification 

TS EN 4708-101 Aerospace series - for cuffing, heat shrinkable, bonding, insulation and demonstration ölSection 101: Polyolefin coating - operating temperature - 55 ° C to 135 ° C 

TS EN 6059-301 Aviation series - Electrical cables, installation - Protective sleeves - Test methods - Part 301: Exposure to sunlight 

TS EN 6059-302 Aerospace series - Electrical cables, installation - Protective sleeves - Test methods - Part 302: Exposure to high temperature 

TS EN 6059-304 Aerospace series lekElectric cables, installation, protective sleeves - Test methods - Part 4: Flammability 

TS ISO 268 Aircraft-Mechanical and electromechanical indicators general features 

tst EN 4612-008: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 008: Silver plated copper - Operating temperature - 65 ° c and 150 ° c - Single extruded wall, sheathed and screened (braided) for outdoor applications - UV laser printing possible - Product standard

TS ISO 1949 Aircraft - Electrical fittings - Design rules 

TS EN 2240-055: 2011 Aviation series-Lamps, incandescent filament-Part 055: Lamp, code 1495 - Product standard 

TS EN 2240-057: 2011 Aviation series-Lamps, incandescent filament-Part 057: Lamp, code 1512 - Product standard 

TS EN 2084 Aviation series -Cables, electrical, single core, general purpose, with copper or copper alloy conductor - Technical specifications  

TS EN 2240-056: 2011 Aviation series-Lamps, incandescent filament-Part 056: Lamp, code 1506 - Product standard 

TS EN 2235 Aviation series - Single and multi-core power cables, shielded and sheathed 

TS EN 2240-002 Aviation series-Lamps, incandescent filament-Part 002: Key features 

TS EN 2240-022 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 315- Product standard 

TS EN 2240-008 Aviation series-Lamps, incandescent filament-Part 008: Lamp, code 75 - Product standard 

TS EN 2240-009 Aviation series-Lamps, incandescent filament-Part 009: Lamp, code 83 - Product standard 

TS EN 2240-023 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 316- Product standard 

TS EN 2240-044 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 713- Product standard 

TS EN 2240-003 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 44 - Product standard 

TS EN 2240-004 Aviation series-Lamps, incandescent filament-Part 004: Lamp, code 47 - Product standard 

TS EN 2240-010 Aviation series-Lamps, incandescent filament-Part 010: Lamp, code 84 - Product standard 

TS EN 2240-046 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 715- Product standard 

TS EN 2240-011 Aviation series-Lamps, incandescent filament-Part 011: Lamp, code 85 - Product standard 

TS EN 2240-012 Aviation series-Lamps, incandescent filament-Part 012: Lamp, code 95 - Product standard 

TS EN 2240-013 Aviation series-Lamps, incandescent filament-Part 013: Lamp, code 310 - Product standard 

TS EN 2240-024 Aviation series-Lamps, incandescent filament-Part 003: Lamp, code 327- Product standard 

TS EN 2240-015 Aviation series-Lamps, incandescent filament-Part 015: Lamp, code 304 - Product standard 

TS EN 2240-016 Aviation series-Lamps, incandescent filament-Part 016: Lamp, code 305 - Product standard 

TS EN 2240-017 Aviation series-Lamps, incandescent filament-Part 017: Lamp, code 306 - Product standard 

TS EN 2240-018 Aviation series-Lamps, incandescent filament-Part 018: Lamp, code 307 - Product standard 

TS EN 2240-019 Aviation series-Lamps, incandescent filament-Part 019: Lamp, code 308 - Product standard 

TS EN 2240-026 Aviation series-Lamps, incandescent filament-Part 0026: Lamp, code 330- Product standard 

TS EN 2240-029: 2010 Aviation series-Lamps, incandescent filament-Part 029: Lamp, code 338- Product standard 

TS EN 2240-030 Aviation series-Lamps, incandescent filament-Part 030: Lamp, code 345- Product standard 

TS EN 2240-032 Aviation series-Lamps, incandescent filament-Part 032: Lamp, code 376- Product standard 

TS EN 2240-034 Aviation series-Lamps, incandescent filament-Part 034: Lamp, code 382- Product standard 

TS EN 2240-035 Aviation series-Lamps, incandescent filament-Part 035: Lamp, code 387- Product standard 

TS EN 2240-036 Aviation series-Lamps, incandescent filament-Part 036: Lamp, code 388- Product standard 

TS EN 2240-037 Aviation series-Lamps, incandescent filament-Part 037: Lamp, code 394- Product standard 

TS EN 2240-039 Aviation series-Lamps, incandescent filament-Part 039: Lamp, code 600- Product standard 

TS EN 2240-014 Aviation series-Lamps, incandescent filament-Part 014: Lamp, code 303 - Product standard 

TS EN 2240-041 Aviation series-Lamps, incandescent filament-Part 041: Lamp, code 682- Product standard 

TS EN 2240-042 Aviation series-Lamps, incandescent filament-Part 042: Lamp, code 683- Product standard 

TS EN 2240-043 Aviation series-Lamps, incandescent filament-Part 043: Lamp, code 685- Product standard 

TS EN 2240-047 Aviation series-Lamps, incandescent filament-Part 047: Lamp, code 718- Product standard 

TS EN 2240-048 Aviation series-Lamps, incandescent filament-Part 048: Lamp, code 718 npc- Product standard 

TS EN 2240-021 Aviation series-Lamps, incandescent filament-Part 021: Lamp, code 313- Product standard 

TS EN 2240-063: 2011 Aviation series-Lamps, incandescent filament-Part 063: Lamp, code 1815 - Product standard " 

TS EN 2240-001 Aviation series-Lamps, incandescent filament-Part 001: Technical specification 

TS EN 2240-050 Aviation series-Lamps, incandescent filament-Part 050: Lamp, code 1064- Product standard 

TS EN 2240-028 Aviation series-Lamps, incandescent filament-Part 028: Lamp, code 337- Product standard 

TS EN 2240-040 Aviation series-Lamps, incandescent filament-Part 040: Lamp, code 680- Product standard 

TS EN 2240-074: 2011 Aviation series-Lamps, incandescent filament-Part 074: Lamp, code 5086 - Product standard 

TS EN 2240-079: 2011 Aviation series-Lamps, incandescent filament-Part 079: Lamp, code 6839 - Product standard 

TS EN 2240-052: 2011 Aviation series-Lamps, incandescent filament-Part 052: Lamp, code 1222 - Product standard

TS EN 2240-076: 2011 Aviation series-Lamps, incandescent filament-Part 076: Lamp, code 5678 - Product standard 

TS EN 2240-064: 2011 Aviation series-Lamps, incandescent filament-Part 064: Lamp, code 1819 - Product standard " 

TS EN 2240-077: 2011 Aviation series-Lamps, incandescent filament-Part 077: Lamp, code 6832 - Product standard 

TS EN 2241 Aviation series-Lamp heads-Dimensions 

TS EN 2266-002 Aerospace series - Cables, electric, general purpose, operating temperatures -55 ° c to 200 ° c - Part 002: General   

TS EN 2266-007 Aerospace series - Cables, electric, general purpose, operating temperatures -55 ° c to 200 ° c - Part 007: UV laser printable, multi-core, sheathed cable - Product standard   

TS EN 2266-003 Aerospace series - Cables, electrical, for general purposes - Operating temperature -55 ° c to 200 ° c - Part 003: Suitable for inkjet printing - Product standard 

TS EN 2266-005 Aerospace series - Cables, electric, general purpose, operating temperatures - Between 55 ° c and 200 ° c - Part 005: UV laser printing - Product standard  

TS EN 2267-008 Aerospace series - Cables, electrical, for general purposes - Operating temperature -55 ° c to 260 ° c - Part 008: Dm family, suitable for single uv laser writing and multi-core - Product standard

TS EN 2267-003 Aerospace series - Cables, electrical, for general purposes - Operating temperature -55 ° c to 260 ° c - Part 003: Suitable for inkjet printing - Product standard 

TS EN 2267-005 Aerospace series - Cables, electrical, for general purposes - Operating temperature -55 ° c to 260 ° c - Part 005: Suitable for UV laser writing - Product standard 

TS EN 2267-007 Aerospace series - Cables, electrical, for general purposes - Operating temperature -55 ° c to 260 ° c - Part 007: Dma family, suitable for single ink jet printing and multi-core - Product standard 

TS EN 2282 Aerospace series - Properties of aircraft electrical sources 

TS EN 2283: 2010 Aviation series-Aircraft wiring test

TS EN 2346-002 Aviation series - Cable, electrical, fire-resistant - Operating temperature from -65 ° c to 260 ° c -Section 002: General 

TS EN 2346-003 Aviation series - Cable, electrical, fire-resistant - Operating temperature -65 ° c to 260 ° c -Section 003: Dl family, single core - Product standard 

TS EN 2346-004 Aviation series - Cable, electrical, fire-resistant - Operating temperature -65 ° c to 260 ° c-Section 004: Dn family, suitable for single uv laser writing and multi-core - Product standard 

TS EN 2349-409 Aviation series - Specification and test procedures for relays and contactors - Part 409: Ozone resistance 

TS EN 2349-410 Aerospace series - Specification and test procedures for relays and contactors - Part 410: Molding / note: En Applies with 2349-100. 

TS EN 2349-411 Aviation series - Specification and test procedures for relays and contactors - Part 411: Temperature change 

TS EN 2349-412 Aviation series - Specification and test procedures for relays and contactors - Part 412: Sealing 

TS EN 2349-413 Aerospace series - Specification and test procedures for relays and contactors - Part 413: Tribration, sinusoidal and random 

TS EN 2349-415 Aviation series - Specification and test procedures for relays and contactors - Part 415: Acceleration 

TS EN 2349-201 Aviation series - Specification and test procedures for relays and contactors - Part 201: Visual inspection 

TS EN 2349-202 Aviation series - Specification and test procedures for relays and contactors - Part 202: Measuring dimensions and weighing mass 

TS EN 2349-301 Aerospace series - Specification and test procedures for relays and contactors - Part 301: Pick up and release voltage 

TS EN 2349-302 Aviation series - Specification and test procedures for relays and contactors - Part 302: Insulation resistance 

TS EN 2349-303 Aviation series - Specification and test procedures for relays and contactors - Part 303: Dielectric strength 

TS EN 2349-304 Aerospace series - Specification and test procedures for relays and contactors - Part 304: Operating and release time 

TS EN 2349-305 Aviation series - Specification and test procedures for relays and contactors - Part 305: Leap time 

TS EN 2349-306 Aviation series - Specification and test procedures for relays and contactors - Part 306: Overload and aa 

TS EN 2349-307 Aviation series - Specification and test procedures for relays and contactors - Part 307: Contact voltage drop 

TS EN 2349-308 Aviation series - Specification and test procedures for relays and contactors - Part 308: Coil current 

TS EN 2349-309 Aerospace series - Specification and test procedures for relays and contactors - Part 309: Outward pulses 

TS EN 2349-310 Aviation series - Specification and test procedures for relays and contactors - Part 310: Cutting 

TS EN 2349-312 Aviation series - Specification and test procedures for relays and contactors - Part 312: Electrical life - Mixed load 

TS EN 2349-316 Aviation series - Specification and test procedures for relays and contactors - Part 316: Mechanical life (durability at reduced load) 

TS EN 2349-317 Aerospace series - Specification and test procedures for relays and contactors - Part 317: Life of the coil switching device 

TS EN 2349-318 Aerospace series - Specification and test procedures for relays and contactors - Part 318: High temperature recovery voltage and low temperature cut-off voltage 

TS EN 2349-319 Aviation series - Specification and test procedures for relays and contactors - Part 319: Leak test 

TS EN 2349-402 Aviation series - Specification and test procedures for relays and contactors - Part 402: Corrosion, salt spraying 

TS EN 2349-405 Aviation series - Specification and test procedures for relays and contactors - Part 405: Liquid resistance 

TS EN 2349-407 Aviation series - Specification and test procedures for relays and contactors - Part 407: Cold / low pressure and humid heat 

TS EN 2350 Aviation series - Circuit breakers - Technical specifications 

TS EN 2495 Aviation series-Single pole circuit-breakers, temperature compensated, up to rated current 25a-Product standard

TS EN 2591-100 Aviation series - Electrical and optical connectors - Test methods - Part 100: General  

TS EN 2591-220 Aerospace series - Electrical and optical connectors - Test methods - Part 220: Aging of the contact / conductor connection with current and temperature cycling 

TS EN 2591-515 Aerospace series - Electrical and optical components - Test methods - Part 515: Hydrolytic stability   

TS EN 2591-212 Aerospace series - Electrical and optical connectors - Test methods - Part 212: Surface transfer impedance   

TS EN 2591-102 Aerospace series - Electrical and optical fasteners - Test methods - Part 102: Inspection of dimensions and mass 

TS EN 2591-423 Aerospace series - Electrical and optical connectors - Test methods - Part 423: Binding end fittings thread strength 

TS EN 2591-609 Aerospace series - Electrical and optical connection elements - Test methods - Part 609: Optical elements - Suitability of cable connection - Flexibility of cable rotation   

TS EN 2591-201 Aerospace series - Electrical and optical connectors - Test methods - Part 201: Contact resistance - Low level 

TS EN 2591-202 Aerospace series - Electrical and optical connectors - Test methods - Part 202: Contact resistance in rated current 

TS EN 2591-203 Aerospace series - Electrical and optical connectors - Test methods - Part 203: Electrical continuity at microvolt level 

TS EN 2591-205 Aerospace series - Electrical and optical connectors - Test methods - Part 205: Enclosure electrical continuity 

TS EN 2591-207 Aviation series-Electrical and optical connectors-Test methods-Part 207: Voltage verification test 

TS EN 2591-208 Aviation series-Electrical and optical connectors-Test methods-Part 208: Temperature rise due to rated current 

TS EN 2591-209 Aviation series-Electrical and optical connectors-Test methods-Part 209: Current temperature re-declaration 

TS EN 2591-210 Aerospace series - Test methods for electric and optical fasteners section 210: Overloading 

TS EN 2591-213 Aerospace series - Test methods for electric and optical connectors section 213: Shielding efficiency between 100 mhz and 1 ghz 

TS EN 2591-216 Aerospace series - Test methods for electrical and optical fasteners section 216: Grip depth 

TS EN 2591-301 Aviation series-Electrical and optical connectors-Test methods-Part 301: Temperature resistance 

TS EN 2591-302 Aerospace series - Test methods for electric and optical fasteners section 302: Air conditioning sequence 

TS EN 2591-303 Aerospace series - Test methods for electric and optical fasteners section 303: Cold / low pressure and humid heat 

TS EN 2591-304 Aerospace series - Test methods for electric and optical fasteners section 304: Moist heat stable environment 

TS EN 2591-305 Aerospace series - Test methods for electric and optical connectors section 305: Sudden change of temperature 

TS EN 2591-306 Aerospace series - Test methods for electric and optical fasteners section 306: Mold growth

TS EN 2591-308 Aerospace series - Test methods for electric and optical fasteners section 308: Sand and dust 

TS EN 2591-309 Aerospace series - Test methods for electric and optical fasteners section 309: Dry temperature 

TS EN 2591-310 Aerospace series - Test methods for electric and optical fasteners section 310: Cold 

TS EN 2591-311 Aerospace series - Test methods for electric and optical fasteners section 311: Low air pressure 

TS EN 2591-312 Aerospace series - Test methods for electric and optical fasteners section 312: Air leak 

TS EN 2591-313 Aerospace series - Test methods for electric and optical fasteners section 313: Artificial rain 

TS EN 2591-314 Aerospace series - Test methods for electric and optical connectors section 314: Immersion at low air pressure 

TS EN 2591-315 Aerospace series - Test methods for electric and optical connectors section 315: Fluid resistance 

TS EN 2591-316 Aerospace series - Test methods for electrical and optical fasteners section 316: Ozone resistance 

TS EN 2591-317 Aerospace series - Test methods for electrical and optical fasteners section 317: Flammability 

TS EN 2591-318 Aerospace series - Test methods for electric and optical fasteners section 318: Fire resistance 

TS EN 2591-319 Aerospace series - Test methods for electrics and optical connectors section 319: Gas tightness of solderless plug-in connections 

TS EN 2591-320 Aerospace series - Test methods for electric and optical fasteners section 320: Simulated solar radiation at ground level 

TS EN 2591-321 Aerospace series - Test methods for electric and optical connectors section 321: Damp heat cycling test 

TS EN 2591-322 Aerospace series - Test methods for electrical and optical fasteners section 322: Air tightness 

TS EN 2591-323 Aerospace series - Test methods for electric and optical fasteners section 323: Thermal shock 

TS EN 2591-324 Aerospace series - Test methods of electrical and optical fasteners 

TS EN 2591-401 Aviation series-Electrical and optical connectors-Test methods-Part 401: Acceleration, permanent state

TS EN 2591-404 Aerospace series - Test methods for electrical and optical fasteners section 404: Transverse load 

TS EN 2591-405 Aerospace series - Test methods for electric and optical fasteners section 405: Axial load 

TS EN 2591-406 Aerospace series - Test methods for electric and optical fasteners section 406: Mechanical durability 

TS EN 2591-407 Aerospace series electrical and optical connectors - Test methods - Part 407: Continuity of the system's contact state and ambient conditions 

TS EN 2591-408 Aerospace series - Test methods for electric and optical fasteners section 408: Insertion and withdrawal forces

TS EN 2591-409 Aerospace series - Electrical and optical connectors - Test methods - Part 409: Contact 

TS EN 2591-410 Aerospace series - Test methods for electrical and optical fasteners section 410: Insertion frequency (axial) 

TS EN 2591-411 Aerospace series - Test methods for electrical and optical fasteners section 411: Insertion frequency (piping) 

TS EN 2591-412 Aerospace series - Electrical and optical connectors - Test methods - Part 412: Contact of insertion and removal forces 

TS EN 2591-413 Aerospace series - Test methods for electrics and optical couplings section 413: Grip strength of spring-loaded grounding system 

TS EN 2591-414 Aerospace series - Test methods for electric and optical fasteners section 414: Separation of fasteners that release the draw rope 

TS EN 2591-507 Aviation series-Electrical and optical fasteners-Test methods-Part 507: Coating porosity 

TS EN 2591-513 Aviation series -Electrical and optical fasteners; Test methods - Part 513: Magnetic permeability 

TS EN 2591-514 Aviation series - Electrical and optical fasteners; Test methods - Part 514: Solderability of contacts only when solder and flux are present 

TS EN 2591-601 Aviation series - Electrical and optical fasteners; Test methods-Part 601: Optical elements: Settlement loss 

TS EN 2591-602 Aviation series-Electrical and optical connectors: Test methods-Part 602: Optical elements: Inspection exchange and optical discontinuity 

TS EN 2591-603 Aviation series - Electrical and optical fasteners; Test methods-Part 603: Optical elements; Change of power distribution 

TS EN 2591-604 Aviation series - Electrical and optical fasteners; Test methods-Part 605: Optical elements: Cleaning the optical face 

TS EN 2591-605 Aviation series - Electrical and optical fasteners; Test methods-Part 605: Return loss of optical elements 

TS EN 2591-606 Aviation series - Electrical and optical fasteners; Test methods-Part 606: Optical elements: Conversation 

TS EN 2591-607 Aerospace series - Electrical and optical fasteners test methods - Part 607: Weak connection with optical elements unaffected 

TS EN 2591-610 Aviation series-Electrical and optical connectors-Test methods, section 610: Optical elements-Efficiency of cable connections cable pull ring 

TS EN 2591-611 Aviation series-Electrical and optical connectors-Test methods-Part 611: Effectiveness of optical elements wiring, twisted cable 

TS EN 2591-612 Aviation series-Electrical and optical connectors-Test methods section 612: Optical elements-Efficiency of cable connection-Longitudinally clamped cable 

TS EN 2591-613 Aviation series-Electrical and optical fasteners-Test methods-Part 613- Optical elements-Impact test 

TS EN 2591-615 Aviation series-Electrical and optical connectors-Test methods-Part 615: Optical elements-Hot complementary connection 

TS EN 2591-617 Aviation series-Electrical and optical connectors-Test methods-Part 617: Periodic temperature change of optical elements 

TS EN 2591-701 Aerospace series -Electric and optical connectors-Section 701: Test methods electrical elements-Coupling open-circuit impedance measurement 

TS EN 2591-702 Aerospace series-Electrical and optical connectors-Test methods section 702: Electrical elements-Measurement of coupling signal distortion 

TS EN 2591-703 Aviation series-Electrical and optical connectors-Test methods section 703: Common mode attenuation of electrical elements couplings 

TS EN 2591-704 Aerospace series -Electrical and optical connectors-Test methods-Part 704: Measurement of the winding ratio of the coupling couplings of electrical elements 

TS EN 2591-705 Aviation series-Electrical and optical connection elements test methods-Section 705: Electrical elements-Coupling input impedance measurement 

TS EN 2591-706 Aviation series-Electrical and optical connectors-Test methods section 706: Electrical elements-Transmission test 

TS EN 2591-707 Aerospace series - Experimental methods for electrical and optical connectors -Chapter 707: Measurement of characteristic impedance of electrical components distribution terminal 

TS EN 2591-221 Aerospace series - Electrical and optical components - Test methods - Part 221: Voltage standing wave ratio (vswr) 

TS EN 2591-222 Aerospace series - Electrical and optical connectors - Test methods - Part 222: Loss of input (l.l.) 

TS EN 2591-223 Aerospace series - Electrical and optical connectors - Test methods - Part 223: Measurement of the characteristic emepedance of the coaxial connector or contact 

TS EN 2591-224 Aerospace series - Electrical and optical components - Test methods - Part 224: Rf leak 

TS EN 2591-226 Aerospace series - Electrical and optical connectors - Test methods - Part 226: Corona level 

TS EN 2592 Aviation series; Three-pole circuit breakers up to 25a temperature compensated rated currents; Product standard 

TS 2633 Aircraft electrical system voltages 

TS ISO 2635 Aircraft - Conductors for aviation applications and general purpose aircraft electrical cables - Dimensions and specifications

TS EN 2665-3 Aerospace series circuit-breakers, three-pole, temperature stable, rated currents 20 a - 50 a part 003: Metric threaded terminals - Manufacturing standard

TS 2684 Dimensions of narrow beam downlights used in aircraft 

TS EN 2713-007 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 007: Screened (spiral) and sheathed, suitable for UV laser writing - Product standard 

TS EN 2713-003 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 003: Screened (spiral) and sheathed, suitable for inkjet printing - Product standard 

TS EN 2713-004 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 004: Screened (braided) and sheathed, suitable for inkjet printing - Product standard 

TS EN 2713-005 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 005: Shielded and sheathed, suitable for co2 laser writing - Product standard 

TS EN 2713-006 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 006: Screened (braided) and sheathed, suitable for co2 laser writing Product standard 

TS EN 2713-008 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 008: Screened (braided) and sheathed, suitable for UV laser printing - Product standard 

TS EN 2713-009 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature between 55 ° c and 200 ° c - Part 009: Screened (spiral) and sheathed, suitable for writing with yag x3 laser - Product standard 

TS EN 2713-010 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 010: Shielded (braided) and sheathed, suitable for laser x3 writing - Product standard 

TS EN 2713-002 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature between 55 ° c and 200 ° c - Part 002: Shielded and sheathed - General

TS EN 2713-011 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 200 ° c - Part 011: Silver coated copper screen (spiral) and sheathed, with uv laser suitable for writing - Product standard 

TS EN 2714-011 Aviation - Cables, electrical, general purpose, single and multi-core - Operating temperatures -55 ° c to 260 ° c - Part 011: Dm family, shielded (helical) and coated; UV laser printing can be done - Product standard  

TS EN 2714-003 Aerospace series - Cables, electrical, general purpose, single and multi-core - Operating temperatures -55 ° c to 260 ° c - Part 003: Screened (helical) and coated, ink printable - Product standard  

TS EN 2714-013 Aerospace series - Cables, electrical, general purpose, single and multi-core - Operating temperatures -55 ° c to 260 ° c - Part 013: Dr family, screened (helical) and coated, with uv laser printing - Product standard  

TS EN 2714-012 Aerospace series - Cables, electrical, general purpose, single and multi-core - Operating temperatures -55 ° c to 260 ° c - Part 012: Dm family, screened (braided) and coated, uv laser printing possible - Product standard   

TS EN 2714-004 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 260 ° c - Part 004: Screened (braided) and sheathed, suitable for inkjet printing - Product standard 

TS EN 2714-005 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 260 ° c - Part 005: Shielded and sheathed, suitable for co2 laser writing - Product standard 

TS EN 2714-006 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 260 ° c - Part 006: Screened (braided) and sheathed, suitable for co2 laser writing Product standard 

TS EN 2714-008 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 260 ° c - Part 008: Screened (braided) and sheathed, suitable for UV laser printing - Product standard 

TS EN 2714-009 Aviation - Cables, electrical, general purpose, single and multi-core - Operating temperatures -55 ° c to 260 ° c - Part 009: Screened and coated -Yag3 laser printable-Product standard 

TS EN 2714-010 Aerospace series - Cables, electrical, single and multi-core for general purposes - Operating temperature - between 55 ° c and 260 ° c - Part 010: Shielded (braided) and sheathed, suitable for laser x3 writing - Product standard 

TS 2721 Dimensions and electrical properties of flexible coaxial radio frequency cables used in aircraft 

TS EN 2756 Aviation series - Lamps, incandescent filament - Test methods

TS EN 2794-3 aviation drums - Circuit breakers, single pole, temperature balanced - Rated currents 20a - 50 a - Part 003: Manufacturing standard for metric threaded terminals

TS EN 2812 Aerospace series - Felting of electrical cables 

TS EN 2853 Aviation series - Current declarations for conductive electrical cables  

TS EN 2854-002 Aerospace series - Cables, electrical, for general purpose - With sections greater than or equal to 9 mm2 - Operating temperature - Between 55 ° c and 260 ° c - Part 002: General 

TS EN 2854-003 Aerospace series - Cables, electrical, for general purpose - With sections greater than or equal to 9 mm2 - Operating temperature - Between 55 ° c and 260 ° c - Part 003: Product standard 

TS EN 2985 Aviation series - Nickel-Cadmium accumulators-Format a type 

TS EN 2987 Aviation series - Nickel - Cadmium accumulators - Format c type 

TS EN 2988 Aviation series - Nickel - Cadmium accumulators - Format d type 

TS EN 2991 Aviation series - Nickel - Cadmium accumulators - Format e type 

TS EN 2995-001 Aviation series - Circuit-breakers, single-pole, temperature-resistant, with rated current 1 to 25 a - Part 001: Technical specifications 

TS EN 2995-004 Aviation series - Circuit-breakers, single-pole, temperature-resistant, with rated current 1 to 25 a - Part 004: with signal contact - Product standard 

TS EN 2995-005 Aviation series - Circuit-breakers, single-pole, temperature-resistant, with rated current 1 a to 25 a - Part 005: Polarized signal contact - Product standard 

TS EN 2996-001 Aviation series - Circuit-breakers, three-pole, temperature-resistant, with rated current 1 to 25 a - Part 001: Technical specifications 

TS EN 2996-004 Aerospace series - Circuit-breakers, three-pole, temperature-resistant, with rated current 1 to 25 a - Part 004: Signal contact - Product standard 

TS EN 2996-005 Aviation series - Circuit-breakers, three-pole, temperature-resistant, with rated current 1 a to 25 a - Part 005: with polarized signal contact - Product standard

TS EN 2997-004 Aviation series - Fasteners, electrical, circular, with threaded ring, fire-resistant or non-resistant operating temperature 65-175 <grad> c continuous, 200c continuous, 260 <grad> c maximum section 4: Clit samsun fitted enclosure - Manufacturing standard 

TS EN 2997-006 Aviation series - Fasteners, electrical, circular, with threaded ring, fireproof or non-resistant operating temperature 65-175 <grad> c continuous, 200c continuous, 260 <grad> c maximum section 6: Airtight locknut fitted housing - Manufacturing standard

TS EN 2997-008 Aviation series - Fasteners, electrical, circular, with threaded ring, fire-resistant or non-resistant operating temperature 65-175 <grad> c continuous, 200c continuous, 260 <grad> c maximum section 8: Plug manufacturing standard 

TS EN 2997-015: 2011 Aviation series - Fasteners, electrical, circular, with threaded ring, refractory or non-resistant, operating temperature 65 ° c - 175 ° c continuous, 200 ° c continuous, maximum 260 ° c- Part 15: Lock nut housing with integrated accessory - Product standard 

TS EN 2997-012 Aerospace series - Fasteners, electrical, circular, with threaded ring, flame retardant or durable, operating temperature 65-175 oc continuous, 200 oc continuous, 260 oc at most - Part 012: Lock nut housing nut - Product standard 

TS EN 2997-013 Aviation series - Fasteners, electrical, circular, with threaded ring, flame retardant or non-durable, operating temperature 65-175 oc continuous, 200 oc continuous, 260 oc at most - Part 013: for locknut housing o -Conta - Product standard 

TS EN 2997-011: 2010 Aviation series - Fasteners, electrical, circular, with threaded ring, fire-resistant or non-durable operating temperature 65-175 ° c continuous, 200 ° c continuous, 260 ° c max. Section 11: Auxiliary housing - Product standard 

TS EN 2997-001: 2011 Aviation series - Fasteners, electrical, circular, with threaded ring, flame retardant or durable, operating temperature 65 ° c - 175 ° c continuous, 200 ° c continuous up to 260 ° c- Section 1 : Technicial Specifications 

TS EN 2997-014: 2011 Aviation series - Fasteners, electrical, circular, with threaded ring, fire-resistant or non-durable operating temperature 65 ° c-175 ° c continuous, 200 ° c continuous, 260 ° c maximum- Part 014: Auxiliary equipped square flange housing - Product standard

TS EN 3155-019 Aerospace series - Electrical contacts for fasteners - Part 019: Contacts, electrical, female, type a, inclined, class s - Product standard 

TS EN 3155-018 Aerospace series - Electrical contacts for fasteners - Part 018: Contacts, electrical, male, type a, inclined, class s - Product standard 

TS EN 3155-014 Aerospace series - Electrical contacts for fasteners - Part 014: Contacts, electrical, male, type a, inclined, class s - Product standard 

TS EN 3155-016 Aerospace series - Electrical contacts for fasteners - Part 016: Contacts, electrical, male, type a, inclined, class s - Product standard

TS EN 3155-012 Aviation series - Electrical contacts for fasteners - Part 012: Contacts, electrical, three-way, size 8, male, type d, soldered, class r - Product standard 

TS EN 3155-013 Aerospace series - Electrical contacts for fasteners - Part 012: Contacts, electrical, three-way, size 8, female, type d, soldered, class r - Product standard 

TS EN 3155-026: 2010 Aviation series - Electrical contacts for fasteners - Part 026: Contacts, electrical, male, type a, inclined, class r - Product standard 

TS EN 3155-069 Aerospace series - Electrical contacts used in fittings - Part 069: Contacts, electrical, coaxial, size 16, female, type d, solder, class p - Product standard

TS EN 3155-004 Aerospace series - Electrical contact for fasteners - Part 004: Contacts, electrical, male, type a, bent, class t - Product standard 

TS EN 3155-015 Aerospace series - Electrical contacts for fasteners - Part 015: Contacts, electrical, female, type a, inclined, class s - Product standard 

TS EN 3155-017 Aerospace series - Electrical contacts used in fasteners - Part 017: Contacts, electrical, relay-based, female, type a, inclined, class p - Product standard 

TS EN 3155-022 Aerospace series - Electrical contacts for fasteners - Part 022: Contacts, electrical, rectangular, male, type a, inclined, class r - Product standard 

TS EN 3155-024 Aviation series - Electrical contacts for fasteners - Part 024: Contacts, electrical, three-way, size 8, male, type d, sloping, class s - Product standard 

TS EN 3155-025 Aerospace series - Electrical contacts for fasteners - Part 024: Contacts, electrical, three-way, size 8, female, type d, sloping, class s - Product standard 

TS EN 3155-027 / AC Aerospace series - Electrical contacts for fasteners - Part 027: Contacts, electrical, female, type a, inclined, class r - Product standard 

TS EN 3155-029 Aerospace series - Electrical contact for fasteners - Part 029: Contacts, electrical, coaxial, armored, dimension 16, female, type d, crimped, class r - Product standard 

TS EN 3155-030 Aerospace series - Electrical contacts for fasteners - Part 003: Contacts, electrical, female, type a, inclined, class s - Product standard 

TS EN 3155-031 Aerospace series - Electrical contacts for fasteners - Part 035: Contacts, electric, coaxial, armored, size 12, female, type d, inclined, class r - Product standard 

TS EN 3155-034 Aerospace series - Electrical contact points for fasteners - Part 034: Contact points, electrical, three-way, male, type d, inclined, class r - Product standard 

TS EN 3155-046 Aviation series - Electrical contact for fasteners - Part 046: Contacts, electrical, male, type a, twisted pair, class s - Product standard 

TS EN 3155-047 Aerospace series - Electrical contact for fasteners - Part 047: Contacts, electrical, female, type a, twisted-pair, class s - Product standard 

TS EN 3155-054 Aerospace series - Electrical contacts for fasteners - Part 054: Contacts, electrical, male thermocouple nial, type c, inclined, t class - Product standard 

TS EN 3155-055 Aerospace series - Electrical contacts for fasteners - Part 055: Contacts, electrical, female thermocouple nial, type c, inclined, t class - Product standard 

TS EN 3155-056 Aviation series - Electrical contacts for fasteners - Part 056: Contacts, electrical, male, thermocouple nicr, type c, inclined, t class - Product standard 

TS EN 3155-057 Aerospace series - Electrical contacts for fasteners - Part 057: Contacts, electrical, female, thermocouple nicr, type c, curved, class t - Product standard 

TS EN 3155-058 Aerospace series - Electrical contacts for fasteners - Part 058: Contacts, electrical, coaxial, size 16, male, type d, soldered, class r - Product standard 

TS EN 3155-060 Aerospace series - Electrical contacts for fasteners - Part 060: Contacts, electrical, coaxial, size 12, male, type d, soldered, class r - Product standard 

TS EN 3155-061 Aerospace series - Electrical contacts for fasteners - Part 061: Contacts, electrical, coaxial, size 12, female, type d, soldered, class r - Product standard

TS EN 3155-032 Aerospace series - Electrical contacts for fasteners - Part 032: Contacts, electrical, coaxial, 50 ohm, size 5, male, type d, crimped, class r - Product standard 

TS EN 3155-033 Aerospace series - Electrical contacts for fasteners - Part 033: Contacts, electrical, coaxial, 50 ohm, size 5, female, type d, crimped, class r - Product standard 

TS EN 3155-063 Aerospace series - Electrical contacts for fasteners - Part 063: Contacts, electrical, coaxial, 50 ohm, size 1, male, type d, solder, class r - Product standard 

TS EN 3155-064 Aerospace series - Electrical contacts used in fittings - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, female type D, solder, class r - Product standard 

TS EN 3155-067 Aerospace series - Electrical contacts for fasteners - Part 067: Contacts, electrical, coaxial, size 08, male, type d, solder, class r - Product standard 

TS EN 3155-068 Aerospace series - Electrical contacts used in fittings - Part 067: Contacts, electrical, coaxial, size 08, female, type d, solder, class r - Product standard 

TS EN 3155-075 Aerospace series - Electrical contacts for fasteners - Part 075: Contacts, electrical, quadruplex, size 8, female, type e, bent, class r - Product standard 

TS EN 3155-005 Aerospace series - Electrical contacts for fasteners - Part 005: Contacts, electrical, female, type a, beveled, class t - Product standard 

TS EN 3155-005 / AC Aerospace series - Electrical contacts for fasteners - Part 005: Contacts, electrical, female, type a, beveled, class t - Product standard 

TS EN 3155-009 Aerospace series - Electrical contacts for fasteners - Part 009: Contacts, electrical, female, type a, inclined, class s - Product standard 

TS EN 3155-039 Aerospace series - Electrical contacts for fasteners - Part 039: Contacts, electrical, coaxial, size 16, female, type d, soldered, class r - Product standard 

TS EN 3155-040 Aerospace series - Electrical contacts for fasteners - Part 040: Contacts, electrical, coaxial, size 12, male, type d, soldered, class r - Product standard 

TS EN 3155-041 Aerospace series - Electrical contacts for fasteners - Part 041: Contacts, electrical, coaxial, size 12, female, type d, soldered, class r - Product standard 

TS EN 3155-023 Aerospace series - Electrical contacts for fasteners - Part 023: Contacts, electrical, rectangular, female, type a, inclined, class r - Product standard 

TS EN 3155-027 Aerospace series - Electrical contacts for fasteners - Part 027: Contacts, electrical, female, type a, inclined, class r - Product standard 

TS EN 3155-028 Aerospace series - Electrical contacts for fasteners - Part 028: Contacts, electrical, coaxial, armored, size 16, male, type d, inclined, class p - Product standard 

TS EN 3155-042 Aerospace series - Electrical contacts for fasteners - Part 042: Contacts, electrical, three-way size 08, male 042, type d, soldered, class p - Product standard 

TS EN 3155-043 Aerospace series - Electrical contacts for fasteners - Part 043: Contacts, electrical, three-way size 08, female 043, type d, soldered, class p - Product standard 

TS EN 3197: 2010 Aviation series - Design and installation of aircraft electrical and optical interconnection systems

TS EN 3218-001 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 001: Technical specifications 

TS EN 3218-002 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 002: Performance characteristics and contact patterns 

TS EN 3218-005 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 005: Plug, non-detachable, size 22, soldered connections - Product standard 

TS EN 3218-006 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 006:, non-removable, size 22, soldered connections - Product standard 

TS EN 3218-007 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 007: Plug, non-detachable, size 20, beveled connections - Product standard 

TS EN 3218-008 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 008: Screw housings, non-removable, size 20, beveled connections - Product standard 

TS EN 3218-009 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 009: Protective covers for fasteners according to EN 3218-005 and EN 3218-007 - Product standard 

TS EN 3218-010 Aviation series - Fasteners, rectangular, with metallic housing and screw locking - Part 010: Protective covers for fasteners according to EN 3218-006 and EN 3218-008 - Product standard 

TS EN 3218-011 Aerospace series - Fasteners, rectangular, with metallic housing and screw locking - Part 011: Tools, dismantling for fasteners according to EN 3218-005 to EN 3218-008 - Product standard 

TS EN 3372-002 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° c to 175 ° c or 200 ° c - Part 002: Performance characteristics and contact patterns 

TS EN 3372-005 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° c to 175 ° c or 200 ° c - Part 005: Housing, hermetic, round flange, soldered - Product standard 

TS EN 3372-007 Aerospace series - Fasteners, electrical, circular, medium or high contact density, with nut coupling, continuous, continuous operating temperature - 65 ° c to 175 ° c or 200 ° c - Part 007: For plug protective cap - Product standard 

TS EN 3373-012 Aerospace series - Connection bolts and in-line connections for bending on electrical fasteners - Part 12: In-line connections, insulated and sealed, for connection on copper conductors, temperature up to 150 ° c - Product standard 

TS EN 3373-013 Aerospace series - Connection bolts and in-line connections for bending on electrical fasteners - Part 13: In-line connections, insulated and moisture-resistant, for connection on copper conductors, temperature up to 260 ° c - Product standard 

TS EN 3373-001 Aviation series - Connection bolts and in-line connections for bending on electrical fasteners - Part 1: Technical specification 

TS EN 3373-010 Aerospace series - Connection bolts and in-line connections for bending on electrical fasteners - Part 010: Connection bolts, round-shaped, tin plated, for bending on electrical copper fasteners, temperature for metric and inch stud series 150 ° up to c - Product standard 

TS EN 3373-014 Aerospace series - Connection bolts and in-line connections for bending on electrical fittings - Part 014: In-line connections, insulated and sealed, for bending on electrical copper fittings, temperature up to 200 ° c - Product standard 

TS EN 3373-002 Aviation series - Connection bolts and in-line connections for bending on electrical fasteners - Part 002: General and product standard list 

TS EN 3375-003 Aviation series - for cable, electrical, digital information transmission - Part 003: Single core - 77 ohm - Kg type - Product standard 

TS EN 3375-005 Aviation series - For cable, electrical, digital information transmission - Part 005: Double core - 77 ohm - Type Wv - Product standard 

TS EN 3375-006 Aviation series - For cable, electrical, digital information transmission - Part 006: Single core - 78 ohm - Type Xm - Product standard 

TS EN 3375-008 Aviation series - for cable, electrical, digital data transmission - Part 008: Single core - Star quad 100 ohm - Type kd - Product standard

TS EN 3475-414 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 414: Differential scanning calorimeter (dsc tests)   

TS EN 3475-416 Aerospace series - Cables, electricity, used in aircraft - Test methods - Part 416: Thermal stability   

TS EN 3475-415 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 415: Rapid change of temperature   

TS EN 3475-706 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 706: Laser marking 

TS EN 3475-513 Aerospace series - Cables, electricity, used in aircraft - Test methods - Part 513: Resistance to deformation (installation with plastic cable ties)   

TS EN 3475-306 Aerospace series - Cables, electricity, aircraft - Test methods - Part 513: Continuity of conductors   

TS EN 3475-801 Aerospace series - Cables, electrical, used in aircraft, test methods, part 801: Capacity for unit length 

TS EN 3475-803 Aerospace series-Cables, electricity, test methods used in aircraft-Part 803: Capacitance change 

TS EN 3475-805 Aerospace series-Cables, used in electricity, aircraft; Test methods-Section 805: Impedance property 

TS EN 3475-806 Aerospace series-Cables, electricity, used in aircraft, test methods-Part 806: Attenuation 

TS EN 3475-408 Aerospace series - Cables, electricity, used in aircraft - Test methods - Part 408: Fire resistance   

TS EN 3475-407 Aerospace series-Test methods for cables, electrical and aircraft use-Part 407-Flammability 

TS EN 3475-418 Aerospace series - Cables, electricity, used in aircraft - Test methods - Part 418: Thermal resistance for conductors

TS EN 3475-506 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 506: Coating continuity 

TS EN 3475-507 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 507: Adhesion of coating 

TS EN 3475-508 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 508: Coating thickness

TS EN 3475-705 Aerospace series - Test methods for cables, electricity, aircraft - Part 705: Contrast measurement 

TS EN 3475-802 Aerospace series-Cables, electricity, used in aircraft-Test methods-Part 802: Unbalance capacity 

TS EN 3475-812 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 812: Return loss (vswr) 

TS EN 3475-809 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 809: Resistance unbalance 

TS EN 3475-810 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 810: Structural return loss 

TS EN 3475-811 Aerospace series - Cables, electricity, aircraft used - Test methods - Part 811: Reducing instability 

TS EN 3475-203 Aerospace series - Cables, electrical, used in aircraft - Test methods - Part 203: Dimensions 

TS EN 3475-501 Aviation series-Electrical cables used in aviation-Test methods-Part 501: Dynamic output 

TS EN 3475-605: 2010 Aviation series-Cables, electricity, used in aircraft, test methods-Part 605: Wet short circuit test

TS EN 3545-004 Aviation series - Connectors, electrical, rectangular, sealed or non-sealed, with plastic housing, locking device, operating temperatures -55 ° c to 175 ° c - Part 004: Connectors with male contact point - Product standard  

TS EN 3545-003 Aviation series - Connectors, electrical, rectangular, sealed or non-sealed, with plastic housing, locking device, operating temperatures -55 ° c to 175 ° c - Part 003: Female contact point connectors - Product standard  

TS EN 3545-001 Aviation series - Connectors, electrical, rectangular, sealed or non-sealed, with plastic housing, locking device, operating temperatures -55 ° c to 175 ° c - Part 001: Technical specifications 

TS EN 3545-002 Aviation series - Connectors, electrical, rectangular, sealed or non-sealed, with plastic housing, locking device, operating temperatures -55 ° c to 175 ° c - Part 002: Performance specifications and point of contact arrangements 

TS EN 3545-006 Aerospace series - Fastening elements, electrical, rectangular, sealed on the outside, with plastic housing, locking device, operating temperature - 55 ° c to 175 ° c - Part 006: For installation in fixed housing (opening) male coding and binding system - Product standard 

TS EN 3545-008 Aerospace series - Fastening elements, electrical, rectangular, sealed on the outside, with plastic housing, locking device, operating temperature - 55 ° c to 175 ° c - Part 008: Mounting male coding and clamping system / tools for disassembly - Product standard 

TS EN 3545-009 Aviation series - Connectors, electrical, rectangular, sealed or non-sealed, with plastic housing, locking device, operating temperatures -55 ° c to 175 ° c - Part 009: Protective cover for plug and housing - Product standard 

TS EN 3567-003 Line connectors for use in the versatile data bus system in accordance with the Aviation series-Mil-Std-1553b-Part 003: Single-line connectors; Manufacturing standard 

TS EN 3567-004 Line connectors for use in the versatile bus system in accordance with the Aviation series-Mil-Std-1553b-Part 004: Double-line connectors: Manufacturing standard 

TS EN 3645-007 Aviation series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 007: Protective cover for plug - Product standard

TS EN 3645-002 -aviation series - Fasteners, electrical, circular, non-displacement, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 002: Perofrmans characteristics and contact patterns

TS EN 3645-004 Aerospace series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 004: Housing, hermetic, square flange installation - Product standard 

TS EN 3645-005 Aviation series - Fasteners, electrical, circular, non-displacement, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 005: Housing, hermetic, round flange, tight fitting - Product standard 

TS EN 3645-006 Aviation series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 006: Protective cover for housings - Product standard 

TS EN 3645-009 Aerospace series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 009: Housing, round flange, clamp nut connection - Product standard 

TS EN 3645-010 Aerospace series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 010: Housing, hermetic, round flange, clamp nut connection - Finished goods standard 

TS EN 3645-011 Aviation series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 011: Corded plug with earthing terminals - Type 1 - Product standard 

TS EN 3645-012 Aviation series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 012: Corded plug with earthing terminals - Type 2 - Product standard 

TS EN 3645-013 Aerospace series - Fasteners, electrical, circular, non-displaceable, triple threaded connection, with continuous operating temperature 175 ° c or 200 ° c - Part 013: Empty housings - Product standard 

TS EN 3646-002 Aviation series - Fasteners, electrical, circular, with pin connection, operating temperature 175 ° c or 200 ° c continuous - Part 002: Performance characteristics and contact arrangements 

TS EN 3646-003 Aviation series - Fasteners, electrical, circular, wedge connection, continuous operating temperature 175 ° c or 200 ° c - Part 003: Housing, square flange connection - Product standard

TS EN 3646-006 Aviation series - Fasteners, electrical, circular, wedge connection, with continuous operating temperature 175 ° c or 200 ° c - Part 006: Connection with housing, hermetic, clamping nut - Product standard 

TS EN 3646-007 Aviation series - Fasteners, electrical, circular, wedge connection, continuous operating temperature 175 ° c or 200 ° c - Part 007: Housing, hermetic, round flange, welding or solder connection 

TS EN 3646-008 Aviation series - Fasteners, electrical, circular, wedge connection, continuous operating temperature 175 ° c or 200 ° c - Part 008: Plug - Product standard 

TS EN 3646-009 Aviation series - Fasteners, electrical, circular, wedge connection, continuous operating temperature 175 ° c or 200 ° c - Part 009: Protective cover for housing - Product standard 

TS EN 3646-010 Aviation series - Fasteners, electrical, circular, wedge connection, continuous operating temperature 175 ° c or 200 ° c - Part 010: Protective cap for plug - Product standard 

TS EN 3646-011 Aviation series - Fasteners, electrical, circular, wedge connection, continuous operating temperature 175 ° c or 200 ° c - Part 011: Empty housings - Product standard 

TS EN 3660-004 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 004: Cable outlet, type A, straight, with tight clamps according to 2997 and 4067 - Product standard 

TS EN 3660-005 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 005: Cable outlet, type a, 90 °, tight with clamps according to 2997 and 4067 - Product standard 

TS EN 3660-062 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 062: Cable outlet, k type, vertical, for heat shrinkable housing, armored, sealed, self-aligning in accordance with most 3645 Lockable - Product standard 

TS EN 3660-065 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 065: Cable outlet, type k, for vertical, heat shrinkable housing, armored, sealed, to 2997 and 4067 Self-locking - Product standard 

TS EN 3660-063 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 063: Cable outlet, type k, straight, for heat shrinkable housing, armored, sealed, self-aligning to most 3645 Lockable - Product standard 

TS EN 3660-010: 2010 Aviation series - Cable end fittings for electrical and optical fasteners in circle and square - Part 010: Cable outlet, k type, for flat, armored, sealing, heat shrinkable housing - Product standard 

TS EN 3660-001 Aviation series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 001: Technical specifications 

TS EN 3660-002 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 002: Product standards index 

TS EN 3660-006 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 006: Cable outlet, self-locking, type c, straight, armored (conical grounding), tight sealing clamp - Product standard 

TS EN 3660-007 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 007: Cable outlet, self-locking, type c, 90 °, armored (conical grounding), with tight-fitting tension clamp - Product standard 

TS EN 3660-008 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 008: Cable outlet, self-locking, type c, 45 °, armored (conical grounding), with tight-fitting tension clamp - Product standard 

TS EN 3660-009 Aerospace series - Cable end fittings for electrical and optical fasteners in circular and square form - Part 009: Cable end, type j, for straight, leaded, heat shrinkable housing - Product standard 

TS EN 3660-012 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 012: Shaft seal, type a according to 3372 - Product standard 

TS EN 3660-013 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 013: Cable outlet, type a, straight, non-sealing, with tension clamp - Product standard 

TS EN 3660-015 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 015: Cable outlet, type a, 45 °, non-sealing, with tension clamp - Product standard 

TS EN 3660-016 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 016: Shaft seal, self-locking and self-locking type a according to 3645 - Product standard 

TS EN 3660-022 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 022: Cable outlet, type a, straight, composite, non-sealing, tensioned clamp - Product standard

TS EN 3660-017 Aerospace series - Cable outlet accessories for electrical and optical fasteners in circular or rectangular form - Part 017: Cable outlet, type a, straight, unsealed, with tension clamp - Product standard 

TS EN 3660-036 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 036: Ferrule lug for type z outlet cable - Product standard 

TS EN 3660-037 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical fasteners - Part 037: Insulation strip for type z outlet cable, elastomer-product standard 

TS EN 3660-011: 2010 Aviation series - Cable end fittings for electrical and optical fasteners in circle and square - Part 011: Cable outlet, type k, for vertical, heat-shrinkable housing, armored, sealing - Product standard

TS EN 3661-001 Aviation series - Circuit-breakers, single-pole, temperature-resistant, with rated current 20 to 50 a - Part 001: Technical specifications 

TS EN 3661-005 Aviation series - Circuit-breakers, single-pole, temperature-resistant, with rated current 20 to 50 a - Part 005: Polarized signal contact - Product standard 

TS EN 3661-006 Aviation series - Circuit-breakers, single-pole, temperature-resistant, with rated current 20 a to 50 a - Part 006: Polarized signal contact - Busbar type - Product standard 

TS EN 3662-005 Aerospace series - Circuit breakers, three-pole, temperature-resistant, with rated current 20 to 50 a - Part 005: Polarized signal contact - Product standard 

TS EN 3662-006 Aerospace series - Circuit-breakers, three-pole, temperature-resistant, with rated current 20 a to 50 a - Part 006: Polarized signal contact - Type of busbar - Product standard

TS EN 3708-001 Aviation series - Modular clamping systems - End clamping systems - Part 001: Technical specifications 

TS EN 3708-002 Aviation series - Modular clamping systems - End clamping systems - Part 002: Performance characteristics 

TS EN 3708-003 Aviation series - Modular clamping systems - End clamping systems - Part 003: Removable feedback module types, sealed - Product standard 

TS EN 3708-004 Aerospace series - Modular clamping systems - End clamping systems - Part 004: Removable feedback module types, non-sealed - Product standard 

TS EN 3708-005 Aviation series - Modular clamping systems - End clamping systems - Part 005: Accessory frames for feedback modules, sealed and not provided - Product standard 

TS EN 3716-001 Aviation series - Fasteners, one-way, with three-axis interface, for transmission of digital data - Part 001: Technical specifications 

TS EN 3716-002 Aviation series - Fasteners, single-path, three-axis interface, for the transmission of digital data - Part 002: List of conditions of use and product standards 

TS EN 3716-003 Aviation series - Fasteners, one-way, with three-axis interface, for the transmission of digital data - Part 003: Solder housing - Product standard

TS EN 3716-005 Aviation series - Fasteners, single-path, three-axis interface, for the transmission of digital data - Part 005: Inclined housing - Product standard 

TS EN 3716-006 Aviation series - Fasteners, one-way, with three-axis interface, for the transmission of digital data - Part 006: Inclined plug - Product standard 

TS EN 3733-004 Aviation series - Coupler, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° c - Part 004: Slot, fastener, four holes according to most 4532 fixing cable, product standard 

TS EN 3733-005 Aviation series - Coupler, optical, circular, single-channel, connected by self-locking washer, continuous operating temperature up to 150 ° c - Part 005: Slot, fastener, two holes according to most 4532 fixing cable, product standard 

TS EN 3733-006 Aviation series - Coupler, optical, circular, single-channel, connected by self-locking washer, continuous operating temperature up to 150 ° c - Part 006: Slot, coupler, for cable according to 4532 clamping nut assembly, product standard 

TS EN 3733-007 Aviation series - Fastener, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° c - Part 008: To 4532 (200 µm / 280 µm fiber) ring (optical contact) - Product standard 

TS EN 3733-008 Aviation series - Fastener, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° c - Part 008: To 4532 (200 µm / 280 µm fiber) for cable installation 

TS EN 3733-009 Aviation series - Fastener, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° c - Part 009: To 4532 (200 µm / 280 µm fiber) for cable installation 

TS EN 3733-103 Aerospace series - Fastener, optical, circular, single-channel, connected by self-locking washer, continuous operating temperature up to 150 ° c - Part 103: Protective cap clamping nut housing - Product standard 

TS EN 3733-104 Aerospace series - Coupler, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° c - Part 104: Disposable slot fastener mounted in four holes - Product standard 

TS EN 3733-106 Aerospace series - Fastener, optical, circular, single-channel, self-locking with washer, continuous operating temperature up to 150 ° c - Part 106: Disposable socket clamp nut - Product standard 

TS EN 3733-108 Aviation series - Fastener, optical, circular, single-channel, connected by self-locking washer, continuous operating temperature up to 150 ° c - Part 108: Cable support housing - Product standard 

TS EN 3745-401 Aerospace series - Fibers and cables, optics, use in aircraft - Test methods - Part 401: Accelerated aging   

TS EN 3745-402 Aerospace series - Fibers and cables, optics, aircraft use - Test methods - Part 402: Temperature cycle   

TS EN 3745-306 Aerospace series - Use in fibers and cables, optics, aircraft - Test methods - Part 306: Change of attenuation during the temperature cycle  

TS EN 3745-202 Aerospace series - Fibers and cables, optics, use in aircraft - Test methods - Part 202: Fiber dimensions  

TS EN 3745-513 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 513: Impact resistance   

TS EN 3745-412 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 412: Resistance to moisture   

TS EN 3745-404 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 404: Thermal shock   

TS EN 3745-406 Aerospace series - Fibers and cables, optical, used in furnace - Test methods - Part 406: Cold bending test 

TS EN 3745-407 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 407: Flammability   

TS EN 3745-503 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 503: Wear wear   

TS EN 3745-501 Aerospace series - Fibers and cables, optical, used in furnace - Test methods - Part 501: Optical fiber sealing test 

TS EN 3745-703 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 703: Durability of manufacturer marking 

TS EN 3745-502 Aerospace series - Fibers and cables, optical, used in furnace - Test methods - Part 502: Tensile strength of short optical fibers 

TS EN 3745-201 Aerospace series-Fibers and cables, optics, for use in aircraft, test methods-Part 201: Visual inspection 

TS EN 3745-205 Aerospace series-Cables and fiberoptics, used in aircraft; Test methods-Section 205: Cable longitudinal axis stability 

TS EN 3745-302 Aerospace series-Fibers and cables, optics, test methods used in aircraft-Part 302: Numerical 

TS EN 3745-305 Aerospace series-Cables and wires, optics, used in aircraft; Test methods-Section 305: Exemption from light connection environment 

TS EN 3745-504 Aerospace series-Cables and wires, optics, used in aircraft; Test methods-Section 504: Micro bending test 

TS EN 3745-507 Aerospace series-Fibers and cables, optics, used in aircraft; Test methods-Section 507: Cut through length 

TS EN 3745-508 Aerospace series-Cables and fibers, optics, used in aircraft; Test methods-Section 508: Torsion 

TS EN 3745-509 Aerospace series - Optical fiber and cables used in aviation-Test methods section 509-Node test 

TS EN 3745-100 Aerospace series - Fibers and cables, optics, aircraft use - Test methods - Part 100: General 

TS EN 3745-203 Aerospace series - Use in fibers and cables, optics, aircraft - Test methods - Part 203: Cable dimensions / note: En Applicable with 3745-100. 

TS EN 3745-410 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 410: Thermal life 

TS EN 3745-505 Aerospace series - Fibers and cables, optics, used in aircraft - Test methods - Part 505: Cable tensile strength / note: Applied in conjunction with En 3745-100. 

TS EN 3745-512 Aerospace series - Fibers and cables, optics, used in furnaces - Test methods - Part 512: Bending strength 

TS EN 3745-602 Aerospace series - Fibers and cables, optics, aircraft use - Test methods - Part 602: Toxicity 

TS EN 3745-603 Aerospace series - Fibers and cables, optics, use in aircraft - Test methods - Part 603: Nuclear radiation

TS EN 3773-3 Aviation series - Circuit-breakers, single-pole, temperature-balanced, rated currents 1a - switching capacity to 25 up to 65 / n / 1000 - Part 003: Metric threaded terminals

TS EN 3774-3 Aerospace series - Circuit breakers, three-pole, temperature-balanced, rated currents 2a - switching capacity to 25 65 / n - Part 003: Metric threaded terminals - Manufacturing standard

TS EN 3841-100 Aviation series - Circuit-breakers - Test methods - Part 100: General 

TS EN 3841-201 Aviation series - Circuit-breakers - Test methods - Part 201: Visual inspection 

TS EN 3841-202 Aviation series - Circuit-breakers - Test methods - Part 202: Dimensions and masses 

TS EN 3841-301 Aviation series - Circuit-breakers - Test methods - Part 301: Voltage drop 

TS EN 3841-303 Aerospace series - Circuit breakers - Test methods - Part 303: Dielectric strength 

TS EN 3841-304 Aviation series - Circuit-breakers - Test methods - Part 304: Tab points 

TS EN 3841-305 Aviation series - Circuit breakers - Test methods - Part 305: Short circuit performance 

TS EN 3841-306 Aviation series - Circuit-breakers - Test methods - Part 306: Service life 

TS EN 3841-307 Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a specific tab system 

TS EN 3841-308 Aviation series - Circuit breakers - Test methods - Part 308: Lightning

TS EN 3841-401 Aerospace series - Circuit breakers - Test methods - Part 401: Sand and dust 

TS EN 3841-402 Aviation series - Circuit-breakers - Test methods - Part 402: Corrosion 

TS EN 3841-403 Aviation series - Circuit-breakers - Test methods - Part 403: Humidity 

TS EN 3841-404 Aerospace series - Circuit-breakers - Test methods - Part 404: Explosion-proof 

TS EN 3841-407 Aviation series - Circuit-breakers - Test methods - Part 407: Temperature change 

TS EN 3841-501 Aerospace series - Circuit breakers - Test methods - Part 501: Mechanism button movement

TS EN 3841-502 Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces 

TS EN 3841-503 Aerospace series - Circuit breakers - Test methods - Part 503: Strength of mechanism components 

TS EN 3841-504 Aerospace series - Circuit-breakers - Test methods - Part 504: Strength of insertion elements 

TS EN 3841-505 Aerospace series - Circuit breakers - Test methods - Part 505: Strength of main terminals 

TS EN 3841-506 Aerospace series - Circuit breakers - Test methods - Part 506: Vibration performance 

TS EN 3841-507 Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks 

TS EN 3841-508 Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal (centrifugal) acceleration 

TS EN 3841-509 Aerospace series - Circuit breakers - Test methods - Part 509: Insertion and removal forces of signal contact leads 

TS EN 3841-510 Aviation series - Circuit-breakers - Test methods - Part 510: Strength of signal contact terminals 

TS EN 3841-511 Aerospace series - Circuit breakers - Test methods - Part 511: Combined test: Temperature, height and vibration 

TS EN 3909 Aerospace series - Test fluids and test methods for electrical components and subassemblies 

TS EN 4008-001 Aviation series - Electrical and optical fasteners - Bending tools and related accessories - Part 001: Technical specifications 

TS EN 4008-002 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 002: List of product standards 

TS EN 4008-005 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 005: Positioner for the bending tool m22520 / 2-01 - Product standard 

TS EN 4008-006 Aerospace series - Electrical and optical fasteners - Bending tools and associated accessories - Part 006: Positioner for bending tool m22520 / 7 - Product standard

TS EN 4008-011 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 011: Positioner for the bending tool m22520 / 2-01 - Product standard 

TS EN 4008-012 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 012: Positioner for the bending tool m22520 / 2-01 - Product standard 

TS EN 4008-013 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 013: Positioner for the bending tool m22520 / 2-01 - Product standard 

TS EN 4008-015 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 015: Positioner for the bending tool m22520 / 2-01 - Product standard 

TS EN 4008-014 Aerospace series - Electrical and optical fasteners - Bending tools and related accessories - Part 014: Workbench for bending tool m22520 / 31-01 - Product standard 

TS EN 4008-017 Aerospace series - Electrical and optical fasteners - Bending tools and associated accessories - Part 017: Head for bending tool m22520 / 2-01 - Product standard 

TS EN 4008-008: 2011 (EN) Aviation series - Electrical and optical fasteners - Bending tools and associated accessories - Part 008: Positioner for the bending tool m22520 / 7-01 - Product standard 

TS EN 4049-002 Aviation series - Thermal double extension cable - Operating temperatures -65 ° c to 260 ° c - Part 002: General 

TS EN 4049-001 Aerospace series - Thermocouple extension cable - Operating temperature - 65 ° c to 260 ° c - Part 001: Technical specifications 

TS EN 4049-003 Aerospace series - Thermocouple extension cable - Operating temperature - 65 ° c to 260 ° c - Part 003: Single core nickel chrome / nickel aluminum alloy - Product standard 

TS EN 4049-004 Aerospace series - Thermocouple extension cable - Operating temperature - 65 ° c to 260 ° c - Part 004: Dual core nickel chromium / nickel aluminum shielded and coated - Product standard 

TS EN 4056-001 Aviation series - Clamps for cable harnesses - Part 001: Technical specifications 

TS EN 4057-407 Aerospace series - Hardware cable ties - Test methods - Part 407: Verification of toolkit applications

TS EN 4057-202 Aviation series - Hardware cable ties - Test methods - Part 202: Control of mass and dimensions

TS EN 4057-303 Aerospace series - Hardware cable ties - Test methods - Part 303: Fluid resistance

TS EN 4057-405 Aviation series - Hardware cable ties - Test methods - Part 405: Area safety distance

TS EN 4057-301 Aviation series - Hardware cable ties - Test methods - Part 301: Salt mist test

TS EN 4057-100 Aviation series - Clamps for cable bundles - Test methods - Part 100: General 

TS EN 4057-302 Aviation series - Clamps for cable bundles - Test methods - Part 302: Flammability

TS EN 4057-304 Aerospace series - Clamps for cable bundles - Test methods - Part 304: Cycle voltage resistance at maximum operating temperature

TS EN 4057-306 Aviation series - Clamps for cable bundles - Test methods - Part 306: Thermal aging test

TS EN 4057-307 Aviation series - Clamps for cable bundles - Test methods - Part 307: Resistance to UV (ultraviolet) radiation 

TS EN 4057-404 Aviation series - Clamps for cable bundles - Test methods - Part 404: Low temperature installation

TS EN 4057-406 Aviation series - Clamps for cable bundles - Test methods - Part 406: Extension of the locking mechanism 

TS EN 4165-012 Aviation series - Connectors, electrical, rectangular, modular - Operating temperature 175 ° c continuous - Part 012: Flange-mounted container 2 and 4 modules, series 3 - Product standard   

TS EN 4165-022 Aviation series - Connectors, electrical, rectangular, modular - Operating temperature 175 ° c continuous - Part 022: Insertion / removal tool for changing modules - Product standard   

TS EN 4165-014 Aviation series - Connectors, electrical, rectangular, modular - Operating temperature 175 ° c continuous - Part 014: Protected reinforcement body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard   

TS EN 4165-015 Aviation series - Connectors, electrical, rectangular, modular - Operating temperature 175 ° c continuous - Part 015: Round chimney for fittings (1 per module cavity) - Product standard  

TS EN 4165-016 Aviation series - Connectors, electrical, rectangular, modular - Operating temperature 175 ° c continuous - Part 016: Double oval chimney for reinforcement (2 per module) - Product standard   

TS EN 4165-017 Aviation series - Connectors, electrical, rectangular, modular - Operating temperature 175 ° c continuous - Part 017: Black flue for reinforcement (1 per module cavity) - Product standard  

TS EN 4165-001 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 001 - Technical specifications

TS EN 4165-002 Aerospace series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 002 - Performance characteristics and contact arrangements 

TS EN 4165-003 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 003: Module series 2 and 3 - Product standard 

TS EN 4165-004 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 004 - Stackable junction box with 2 and 4 modules, series 3 - Product standard 

TS EN 4165-005 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 005 - Stackable junction box with 2 and 4 modules, series 4 - Product standard 

TS EN 4165-006 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 006: Plug for 2 and 4 module, series 2 - Product standard 

TS EN 4165-007 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 007: Plug for 2 and 4 module, series 3 - Product standard 

TS EN 4165-008 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 008: Shelf and panel plug for 2 and 4 module, series 2 - Product standard 

TS EN 4165-020 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 020: Clamping system bearing for box - Product standard 

TS EN 4165-021 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 021: Fastening system bearing for plug - Product standard 

TS EN 4165-023 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 023: Tools for mounting box coding elements - Product standard 

TS EN 4165-026: 2011 Aviation series - Fasteners, electrical, angular, modular - Continuous operating temperature 175 ° c - Part 026: Accessories for single modules - Product standard

TS EN 4199-005 Aerospace series - Tying strip for airplanes - Part 005: Flat braided copper conductors, - Tin plated up to 65 ° c to 150 ° c and copper nickel plated to -65 ° c to 260 ° c - Product standard

TS EN 4434 Aviation series - Copper or copper alloy light conductors for electrical cables - Product standard (normal and tight tolerances)   

TS EN 4501 Aviation series - Bolts, normal hex head, tight tolerant normal body, short thread, titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c  

TS EN 4530-005 Aerospace series - Electrical and optical connectors - Sealing plugs - Part 006: Sealing fittings for cables with an outside diameter of 3 mm to 4,01 mm - Product standard 

TS EN 4530-006 Aerospace series - Electrical and optical connectors - Sealing plugs - Part 006: Sealing fittings for cables with an outside diameter of 4,68 mm to 5,05 mm - Product standard

TS EN 4532 Aviation series - Cables, optical, single core 200 µm / 280 µm fiber, 2, 5 mm outlet sheath - Technical specifications 

TS EN 4533-001 Aerospace series - Fiber optic systems - Handbook - Section 001: Termination methods and tools 

TS EN 4533-002 Aviation series - Fiber optic systems - Manual - Part 002: Test and measurement 

TS EN 4533-003 Aviation series - Fiber optic systems - Manual - Part 003: Laying and laying applications 

TS EN 4533-004 Aviation series - Fiber optic systems - Manual - Part 004: Repair, maintenance and inspection 

TS EN 4604-001 Aviation series - Cable, electrical, for signal transmission - Part 001: Technical specifications 

TS EN 4604-004 Aviation series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 ohms, 200 ° c, type ws-Product standard 

TS EN 4604-007 Aviation series - Cable, electrical, for signal transmission - Part 007: Cable, microcoaxial, high immunity, 50 ohms, 200 ° c, type wn-Product standard

TS EN 4604-003 Aviation series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohm, 200 ° c, type wz - Product standard

TS EN 4604-008 Aviation series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200 ° c, type wd - Product standard 

TS EN 4608-001 Aviation series - Cable, electrical, fire-resistant - Single and twisted multi-core layout, shielded (knitted) and sheathed - Operating temperature - 65 ° c to 260 ° c - Part 001: Technical specifications 

TS EN 4608-002 Aviation series - Cable, electrical, fire-resistant - Single and twisted multi-core layout, screened (knitted) and sheathed - Operating temperature - 65 ° c to 260 ° c - Part 002: General 

tst EN 4612-003: 2011 Aviation series - Cables, electric, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 003: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Single extruded wall for outdoor applications, non-screened sheathed - UV laser printable - Product standard  

tst EN 4612-004: 2011 Aviation series - Cables, electric, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 004: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Single extruded wall, screened (braided) and sheath-UV laser printing for open applications - Product standard  

tst EN 4612-005: 2011 Aviation series - Cables, electric, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 005: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Double extruded wall for open applications, non-screened sheath-UV laser printable - Product standard  

TS EN 4612-006: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 006: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Double extruded wall, screened (braided) and sheath-UV laser printing for open applications - Product standard  

tst EN 4612-007: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 007: Silver plated copper - Operating temperature - 65 ° c and 150 ° c - Single extruded wall for outdoor applications, non-screened sheathed - UV laser printable - Product standard  

tst EN 4612-009: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 009: Silver plated copper - Operating temperature - 65 ° c and 150 ° c - Double extruded wall for outdoor applications, non-screened sheathed - UV laser printable - Product standard  

tst EN 4612-010: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 010: Silver plated copper - Operating temperature - 65 ° c and 150 ° c - Double extruded wall, sheathed and screened (for braided) for outdoor applications - UV laser printable - Product standard  

tst EN 4612-011: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 011: Nickel plated copper - Operating temperature - 65 ° c and 150 ° c - Double extruded wall for outdoor applications, non-screened sheathed - UV laser printable - Product standard  

tst EN 4612-012: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 011: Nickel plated copper - Operating temperature - 65 ° c and 150 ° c - Double extruded wall, sheathed and screened (for braided) for outdoor applications - UV laser printable - Product standard

tst EN 4612-013: 2011 Aviation series - Cables, electrical, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 012: Sx, tc and tip nickel plated copper - Operating temperature - 65 ° between c and 150 ° c - Single extruded wall, sheathed and screened (only braided) for equipment only - UV laser printing possible - Product standard  

tst EN 4612-006: 2011 Aviation series - Cables, electric, for general purposes, single and multi-core - Xletfe family - Sheathed or shielded and sheathed - Part 006: Tin-plated copper - Operating temperature - 65 ° c and 135 ° c - Double extruded wall, screened (braided) and sheath-UV laser printing for open applications - Product standard  

TS EN 4626-003 Aviation series - Connectors, optical, rectangular, multi-contact, chassis and panel, quadrax clearance, 2,5 mm diameter ring - Operating temperatures - 65 ° c to 125 ° c (depending on cable) - Underwater contacts - Part 003: Plug adapter 

TS EN 4626-004 Aviation series - Connectors, optical, rectangular, multi-contact, chassis and panel, quadrax clearance, 2,5 mm diameter ring - Operating temperatures - 65 ° c to 125 ° c (depending on cable) - Underwater contacts - Part 004: Slot adapter 

TS EN 4639-003 Aviation series - Fasteners, optical, angular, modular, multi-connection, with 1,25 mm ferrule, with removable union holder - Part 003: Male optical module - Product standard 

TS EN 4639-005 Aviation series - Fasteners, optical, angular, modular, multi-connection, with 1,25 mm ferrule, with removable union holders- Part 005: Removable union holders 

TS EN 4639-101 Aerospace series - Fasteners, optical, angular, modular, multi-connection, with 1,25 mm ferrule, with removable sleeve holder - part 101: Optical contact for cable according to most 4641-100 - Operating temperatures - 65 ° c to 125 ° c - Product standard 

TS EN 4639-102 Aerospace series - Fasteners, optical, angular, modular, multi-connection, with 1,25 mm ferrule, with removable sleeve holder - part 101: Optical contact for cable according to most 4641-100 - Operating temperatures - 55 ° c to 100 ° c - Product standard 

TS EN 4640-001 Aviation series - Fasteners, optical, rectangular, frame and panel type, multi-contact, with ring diameter 1,25 mm, with removable adjusting ring holder - Part 001: Technical specifications 

TS EN 4640-003 Aviation series - Fastening elements, optical, rectangular, chassis and panel, multi-contact, 1,25 mm diameter ring, - with removable adjusting ring holder - Part 003: Plug optic fastener - Product standard 

TS EN 4640-004 Aviation series - Fasteners, optical, rectangular, frame and panel, multi-contact, 1,25 mm diameter ring, - with removable adjusting ring holder - Part 004: Slot optical coupling - Product standard 

TS EN 4640-002 Aviation series - Fasteners, optical, rectangular, frame and panel type, multi-contact, with ring diameter 1,25 mm, with removable adjusting ring holder - Part 002: List of product standards 

TS EN 4641-301: 2011 Aviation series - Cables, optics, sheathed with 125 µm diameter - Part 301: Sealed structure 50 / 125 fiberm strength fiber, 1.8 mm nominal outer diameter - Product standard 

TS EN 4641-102 Aviation series - Cables, optical, sheathed with 125 µm diameter - Part 002: Semi-loose 62, 5 / 125 fiberm strength fiber, 1, 8 mm nominal outer diameter - Technical specifications

TS EN 4645-002 Aviation series - Fasteners, plug and socket, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 005: Size 2 plug - Product standard 

TS EN 4645-003 Aviation series - Fasteners, optical, direct, single and multi-ended, self-locking 1,25 mm diameter ring with threaded bush, with removable adjusting ring holder - Part 003: Square flange housing - Product standard 

TS EN 4645-004 Aviation series - Fasteners, optical, directional, single and multi-ended, self-locking 1,25 mm diameter ring with threaded bush, with removable adjusting ring holder - Part 004: Clamping nut housing - Product standard 

TS EN 4645-005 Aviation series - Fasteners, optical, directional, single and multi-ended, self-locking 1,25 mm diameter ring with threaded bush, with removable adjusting ring holder - Part 005: Plug - Product standard 

TS EN 4650 Aviation series - Wire and cable marking process, uv laser 

TS EN 4700-005: 2010 Aerospace series - Steel and heat resistant alloys - Formed products - Technical specifications - Part 005: Forging draft 

TS EN 6049-003 Aerospace series -Electrical cables, installation -Protection sleeve on metaramid fibers-Section 003: Braided, tubular, flexible -Product standard 

TS EN 6049-002 Aviation series-Electrical cables, installation-Protection sleeve on metaramid fibers-Part 002: General and product standard list

TS EN 4645-002 Aviation series - Fasteners, plug and socket, electrical, rectangular, replaceable stud type, from shelf to panel, continuous operating temperature 150 ° c - Part 005: Size 2 plug - Product standard 

TS EN 4645-003 Aviation series - Fasteners, optical, direct, single and multi-ended, self-locking 1,25 mm diameter ring with threaded bush, with removable adjusting ring holder - Part 003: Square flange housing - Product standard 

TS EN 4645-004 Aviation series - Fasteners, optical, directional, single and multi-ended, self-locking 1,25 mm diameter ring with threaded bush, with removable adjusting ring holder - Part 004: Clamping nut housing - Product standard 

TS EN 4645-005 Aviation series - Fasteners, optical, directional, single and multi-ended, self-locking 1,25 mm diameter ring with threaded bush, with removable adjusting ring holder - Part 005: Plug - Product standard 

TS EN 4650 Aviation series - Wire and cable marking process, uv laser 

TS EN 4700-005: 2010 Aerospace series - Steel and heat resistant alloys - Formed products - Technical specifications - Part 005: Forging draft 

TS EN 6049-003 Aerospace series -Electrical cables, installation -Protection sleeve on metaramid fibers-Section 003: Braided, tubular, flexible -Product standard 

TS EN 6049-002 Aviation series-Electrical cables, installation-Protection sleeve on metaramid fibers-Part 002: General and product standard list

TS EN 6059-501 Aerospace series - Electrical cables, installation - Protection sleeve - Part 501: Voltage verification test 

TS 6336 Aircraft-General purpose push / pull three-pole circuit breakers dimensions 

TS 6556 Aircraft-chrome-nickel and aluminum nickel thermocouple connecting cables part 3: Compressed ring-type connectors dimensions 

TS 6557 Aircraft-Chrome-Nickel and aluminum-Nickel thermocouple connecting cables part 4: Compressed plug-type connectors-Dimensions 

TS 6559 Aircraft-Equipment wires, heat-resistant test methods 

TS 6681 Airplanes-Flameproof electrical cables-Dimensions, conductor resistances and masses 

TS 6818 Aircraft - Hermetically sealed single-state 2a and 3a electrical relays operating characteristics and test conditions 

TS 6819 Aircraft - Tests for hermetically sealed single-state relays of 2a and 3a 

TS 7298 Airplanes-Connectors for obtaining electrical energy from the ground-Dimensions 

TS 7507 Airplanes - Repairable contactors (not hermetically sealed) performance requirements 

TS 7612 Aircraft-Sensitive fuses with fused wire-General rules 

TS 7631 Aircraft-Sensitive fuses with fused wire-Type a 

TS 7632 Aircraft-Chrome-Nickel and aluminum-Nickel thermocouple connecting cables part 1: Conductors-General requirements and tests 

TS 8083 Airplanes - Sensitive fuses with fused wire - Type b 

TS 8127 Aircraft-Electrical terminal connection systems-Part 1-Specifications 

TS 8128 Aircraft-Electrical terminal connection systems section 2-Experiments 

TS 8219 Airplanes - 2 amps and 3 amps, base plug type, pole switching relays type II, with plug type connections - Intermediate distances and fixing dimensions 

TS 8303 Electrical wiring diagrams for airplanes 

TS 8744 Airplanes - General purpose push - washer (push - pull) single pole circuit breakers - Dimensions 

TS 8974 Electric cables - Used in aircraft - Compressed connections 

TS 9006 Hand switches - used in airplanes - Single hole and three hole, with mounted lever - Dimensions class: 3 

TS 9160 Aviation - Relays - Protected, electromagnetic, bipolar and four-pole - 2a and 3a - Clearance and mounting dimensions 

TS 9253 Cable lugs - Aluminum - For clamping and fastening aluminum electrical cables used in aircraft 

TS 11694 Electromagnetic compatibility of aircraft systems (stanag 3614) 

TS EN 2240-058: 2011 Aviation series-Lamps, incandescent filament-Part 058: Lamp, code 1524 - Product standard

TS EN 50389 Space assurance - Winding of cables in high-security electrical connections 

TS EN 50390 Space assurance - Manual soldering of high-security electrical connections

TS EN 4626-001 Aviation series - Connectors, optical, rectangular, multi-contact, chassis and panel, quadrax clearance, 2,5 mm diameter ring - Operating temperatures - 65 ° c to 125 ° c (depending on cable) - Underwater contacts - Part 001-Technical specifications