Aircraft and Space Vehicle Engineering, Fasteners Standards for Aircraft and Space Vehicle Construction

The provisions of the standards for Fasteners for Aircraft and Space Vehicle Construction are as follows. We prepare your documents by performing tests, inspections and inspections of all the standards listed below.

TS EN 2149 Aviation- Rivets, solid, universal head, 5056a aluminum alloy, anodized or chrome plated, inch based series

TS EN 2752 Aviation series - Self-locking fixed, two-pronged, reduced series, countersunk nuts; Classification 1100 mpa / 235 ° c

TS EN 2885 Aviation series-Bolts-Cylinder-headed, with rounded edges, positive-groove, coarse tolerance normal body, short screw, alloy steel, cadmium plated-Classification: 900 MPa (at ambient temperature) / 235 ° C

TS EN 2886 Aviation series-Bolts, cylindrical head, with rounded edges off the housing axis, with short tolerance, normal body, short screw, made of alloy steel, cadmium plated-Classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 2906 Aviation series-Nuts, twelve-angle, self-locking, made of heat-resistant fe-Pa92ht (a286) steel-Classification: 1100 mpa (at ambient temperature) 650 ° c

TS EN 2907 Aviation series - Nuts, twelve corners, self-locking, made of heat-resistant fe-Pa92ht (a286) steel - Silver plated - Classification: 1100 mpa (at ambient temperature) 650 ° c

TS EN 2908 Aviation series-Nuts, twelve corners, self-locking, with deep countersunk holes, made of heat-resistant fe-Pa92ht (a286) steel-Classification: 1100 mpa (at ambient temperature) / 650 0c

TS EN 3035 Aviation series - Bolts, 100 ° countersunk with normal head - with rounded edges offset from the axis of the housing - Short tolerance normal body, short thread - Alloy steel - Cadmium plated - Classification 1100 mpa at ambient temperature / 235 ° c

TS EN 2909 Aviation series-Nuts, twelve corners, self-locking, with deep countersunk holes, made of heat-resistant fe-Pa92ht (a286) steel, silver-plated Classification: 1100 mpa (at ambient temperature) / 650 0c

TS EN 2925 Aviation series-Bolts made of fe-Pa92ht (a286) with double hexagonal head, tapered body, long screw, heat-resistant steel-Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 2998 Aviation series - washers, plain, heat-resistant, passivated steel

TS EN 3007 Aviation series-Bolts, hexagon head, thinned body, long screw, made of fe-Pa92ht (a286), heat-resistant steel, silver-plated -Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 3013 Aviation series-Nuts, double hexagonal, self-locking, made of nickel-based alloy nickel-plated P101ht (waspaloy), silver plated-Classification: 1210 mpa (at ambient temperature) / 730 ° c

TS EN 3196 Aviation series - Nuts - Hexagon, self-locking, made of heat-resistant fe-Pa92ht (a286) steel, silver-plated Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 2939 Aviation series-Bolts made of fe-Pa100 ht (a 92) made of heat-resistant steel, screwed up to the head, with 286 ° countersunk normal head, edges offset from the housing axis. 900 MPa (at ambient temperature) / 650 ° C

TS EN 2353 Aviation series-Rotary sleeves-Control cables made of corrosion-resistant steel-Dimensions and loads

TS EN 2354 Aerospace series - Tensioning element - Bore end, threaded - Corrosion resistant steel - Used in control cables - Dimensions and loads

TS EN 2363 Aviation series-Locking connections for tensioning of control cables-Dimensions

TS EN 2364 Aerospace series - Low tolerance pins with headers

TS EN 2583 Aviation series-Bolts, mj screws-Heat-resistant nickel-based Ni-Ph 2601 (Inconel 718) alloys-Classification: 1275 MPA (at ambient temperature) / 650 ° c-Technical specification

TS EN 2139 Aviation series, washers, flat steel products, heat resistant steel

TS EN 2236 Aviation series-Pins-Head bolts-Narrow-tolerance shaft-Alloy steel-Technical specification

TS EN 3004 Aviation series-Nuts, self-locking, with MJ screw, made of temperature-resistant steel FE-PA2601 (a286) - Classification: 1100 MPa (at ambient temperature) / 650 ° C-Technical specifications

TS EN 3037 Aviation series-Bolts, cylindrical head, with rounded edges off the axis of the housing plus a short-cut, normal body, short-screw, made of titanium alloy, anodized, lubricated with mos2-Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3303 Aviation series - Bolts, cylindrical head, hexagon housing, coarse tolerance, normal body, medium length thread, alloy steel and cadmium plated - Classification: 1100mpa (at ambient temperature) / 235 ° c

TS EN 2367 Aviation series - Steel splint pins

TS EN 2942 Aviation series - Ferrule, screw thread, helical spring, self-locking, heat-resistant nickel-based Ni-Ph2801 alloy (inconelx750) silver plated

TS EN 2943 Aviation series - Ferrule, thread, helical spring, self-locking - Technical specifications

TS EN 2944 Aviation series - Ferrule, threaded, helical spring, self-locking - Made of corrosion-resistant fe-Pa3004 steel

TS EN 2945 Aviation series - Ferrule, thread, helical spring, self-locking - Assembly process

TS EN 3008 Aviation series - Bolts, hex head, lightened body, long teeth, heat-resistant nickel-based alloy nı-P100ht (inconel718) - Classification: 1275mla (at ambient temperature) / 650c

TS EN 3010 Aviation series - Bolts, hex head, lightened body, long teeth, heat resistant nickel base alloy nı-P101ht (waspalay) - Classification: 1210 mla (at ambient temperature) / 730 grad c

TS EN 3044 Aviation series - Insertion holes for ferrules, thread, helical winding, self-locking - Design standard

TS EN 3297 Aviation series - Thimbles, thin-walled, self-locking, m5 threaded, heat-resistant nickel-based alloy nı-P100ht (inconel718) - Technical specifications

TS EN 3676 Aviation series - Thimbles, thin-walled, self-locking - Design standard

TS EN 2363 Aviation series - Locking clamps for tensioning of control cables - Dimensions

TS EN 2364 Aviation series - Pins, thin head, narrow tolerance

TS EN 2874 Aviation series - Bolts, wide twelve corners, narrow tolerance normal body, medium length thread, made of heat-resistant nickel-based alloy, passivated - Classification: 1550 mpa (at ambient temperature) / 315 ° c

TS EN 2810 Aviation series - Nuts, hexagonal, grooved / crown, height-reduced, with normal key blade, made of heat-resistant steel, passivated - Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 3014 Aviation series - Housing nuts, self-locking, corrugated, heat-resistant steel made of FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature) / 650 ° c

TS EN 3138 Aviation series - Rivets full 100 ° normal countersunk, dished head, corrosion resistant, made of steel, fe-Pa2601, posivated inch based series

TS EN 3140 Aerospace series - Fe-Pa100 posivated inch-based strips made of corrosion-resistant steel with rivets full 2601 ° countersunk normal head

TS EN 3230 Aviation series - Nuts, hexagon, crown, height-reduced, cadmium-plated steel with normal key blade - Classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 2809 Aviation series-Nuts, hexagon, grooved / crown, height-reduced, with regular key blade, made of heat-resistant steel, silver-plated - Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 3014 Aviation series- Body nut, with safety groove, temperature resistant, made of steel fe-Pa2601 (a286) classification 1100 mpa (at ambient temperature) / 650 ° c

TS EN 3015 Aviation series - Body nut, safety, grooved, fe-Pa2601 (a286) silver-plated made of temperature-resistant steel - Classification 1100 mpa (at ambient temperature) / 650 ° c

TS EN 2926 Aviation series - Bolts, double hexagon head, tapered body, long screw, made of heat-resistant steel FE-PA92ht (A286), silver-plated - Classification: 900 MPa (at ambient temperature) / 650 ° C

TS EN 2928 Aviation series - Bolts, double hexagonal head, thinned body, long screw thread, heat resistant, made of nickel based alloy, NI-P100HT (inconel 718), silver plated- Classification: 1 275 MPa (at ambient temperature) / 650 ° C

TS EN 2931 Aviation series- Bolts with t-head, tapered body, long thread, heat-resistant, made of steel fe-Pa92ht (a286) - Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 2932 Aviation series - Bolts with t-head, tapered body, long thread, heat-resistant, made of silver-plated steel, fe-Pa92ht (a286) - Classification: 900 mpa (ambient temperature) / 650 ° c

TS EN 3135 Aviation series - Rivets, solid, universal cap, corrosion resistant steel fe - Pa11, passivated, inch-based series

TS EN 3142 Aviation series - Rivets, inch-based series of heat-resistant nickel-based nı-P11 alloy with solid head

TS 7303 ISO 5855-1 Aviation series - Mj screws - Part 1: General features

TS EN 3266 Aviation series-Titanium alloy pipe connectors-Compartment nut

TS EN 3267 Aerospace series washers, titanium alloy section

TS EN 3270 Aviation series-Titanium alloy pipe connectors 8 ° 30-Hollow plugs with locking ring

TS EN 3724 Aviation series-Bolts, double-headed, tapered body, long screw, titanium alloy tI-P64001imal, coated with mos2- Classification: 1100 mpa (at ambient temperature)

TS EN 3725 Aviation series-Bolts, with truncated cone head, six lobe housings, normal body, long screw, tI-P64001imal, titanium alloy coated, mos2 coated- Classification: 1100 mpa (at ambient temperature)

TS EN 3726 Aviation series - Self-locking nuts, coated with mos92 made of fe-Pa286ht (a2), made of temperature-resistant steel - Classification: 1100 mpa (at ambient temperature)

TS EN 3741 Aviation series - Nuts, metric - Inserting holes and mounting

TS EN 3752 Aviation series - Nuts coated with mos92 made of temperature-resistant steel fe-Pa286ht (a2) with self-locking mj screw - Classification: 1100 mpa (at ambient temperature) / 425 ° c - Technical specifications

TS EN 3818 Aerospace series - Mj screw bolts, made of titanium alloy ti-P64001 - Classification: 1100 mpa (at ambient temperature) - Technical specifications

TS EN 3831 Aviation series, inserts, thick-walled, self-locking, temperature-resistant steel fe-Pm3801 (17-4ph), mos2 coated

TS EN 3833 Aviation series-Mj screw bolts, made of heat-resistant nickel-based alloy nI-Ph2601 (inconel 718) - Classification: 1550 mpa (at ambient temperature) / 650 ° c - Technical specifications

TS EN 4009 Aviation series-Bolts, double hexagon head, narrow tolerance body, medium-length screw, made of heat-resistant nickel-based alloy nI-P100ht (inconel 718) - Classification: 1550 mpa (at ambient temperature) / 650 ° c

TS EN 4011 Aviation series-Nuts, double hex head, self-locking, temperature-resistant nickel-based alloy nickel-P101ht (inconel 718) silver-plated - Classification: 1550 mpa (at ambient temperature) / 600 ° c

TS EN 4012 Aviation series-Nuts with double hex head, self-locking, temperature-resistant nickel-based alloy nickel-P101ht (inconel 718) coated with mos2 - Classification: 1500 mpa (at ambient temperature) / 425 ° c

TS EN 4013 Aviation series-Casing nuts, self-locking, temperature-resistant nickel-based alloy nickel-P101ht (inconel 718) silver-plated - Classification: 1550 mpa (at ambient temperature) / 600 ° C

TS EN 4014 Aviation series-Inserts, thick-walled, self-locking, design standard

TS EN 4015 Aviation series-Inserts, thick-walled, self-locking, assembly and disassembly

TS EN 4047 Aviation series-Nuts, self-locking, mj threaded, temperature-resistant nickel-based alloy nI-Ph2601 (inconel 718) silver plated - Classification: 1550 mpa (at ambient temperature) / 600 ° c - Technical specifications

TS EN 4048 Aviation series - Nuts, self-locking, mj threaded, temperature-resistant nickel-based alloy NI-Ph2601 (Inconel 718) coated with mos2 - Classification: 1550 mpa (at ambient temperature) / 425 ° C - Technical specifications

TS EN 4116 Aviation series - Nuts, hexagonal, self-locking, made of fe-Pa92ht (a286), temperature-resistant steel, silver-plated with thread - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 4117 Aviation series - Nuts, double bolt, self-locking, made of temperature-resistant nickel-based alloy nI-Ph 2601 (inconel), silver-plated with thread - Classification: 1550 mpa (at ambient temperature) / 600 ° c

TS EN 4118 Aviation series - Nuts made of double-edged, self-locking, temperature-resistant steel fe-Pa92ht (a286), silver-plated with thread - Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 4119 Aviation series - Nuts made of double-edged, self-locking, deep-flare, heat-resistant steel fe-Pa92ht (a286), silver-plated with thread - Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 4120 Aviation series - Nuts, double lock, self-locking, made of temperature-resistant nickel-based alloy nI-Ph 1302 (waspaloy), silver-plated with thread - Classification: 1210 mpa (at ambient temperature) / 730 ° c

TS EN 4122 Aviation series - Housing nuts, self-locking, made of temperature-resistant steel fe-Pa 92ht (a286), silver-plated with thread - Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 4123 Aviation series - Housing nuts, self-locking, made of temperature-resistant nickel-based alloy nI-Ph2601 (inconel718), thread coated silver - Classification: 1550 mpa (at ambient temperature) / 600 ° c

TS EN 4124 Aviation series - Housing nuts, self-locking, made of heat-resistant nickel-based alloy nI-Ph1302 (waspaloy), screw-coated silver, forged in 60 mold - Classification: 1210 mpa (at ambient temperature)

TS EN 4321 Aviation series-Bolts, double hexagonal head with lock holes, lightweight body, long screw thread, made of heat-resistant nickel-based alloy nI-Ph2601 (inconel 718), silver-plated - Classification: 1550 mpa (at ambient temperature) / 650 C

TS EN 4322 Aviation series-Bolts, double hexagon head, with safety wire hole, thinned body, long screw, made of titanium alloy tI-P64001, anodised, coated with mos2 - Strength class: 100 mpa

TS EN 4323 Aviation series-Bolts, 100 ° countersunk head, with six logs, up to the head screw, made of alloy tI-P64001, coated anodised, mos2 - Classification: 900 mpa (at ambient temperature) / 350 ° c

TS EN 4352 Aviation series-Bolts, double hexagon head, safety wire hole, thinned body, long screw, heat resistant nickel-based alloy nI-Ph 2601 (manufactured inconel 718), mos2 coated - Classification: 1550 mpa (at ambient temperature) / 425 ° C

TS EN 2752 Aviation series - Retaining nuts - Self-locking, fixed, two-ears, countersunk, thinned series - Classification: 1100 mpa / 235 ° c

TS EN 2859 Aviation series - Bolts, normal hex head, narrow tolerance normal body, short thread, made of steel alloy, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4173 Aviation series - Lock bolts, 100 ° countersunk normal head, shear strength type, tight tolerances, made of titanium alloy tI-P64001, anodized, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4174 Aviation series - Rings, compression-tight, scissor type, anodized or chrome-plated, made of aluminum alloy 2024, metric series

TS EN 4401 Aviation series - Locked bolts, wide-head, shear-resistant type, tight tolerances, made of titanium alloy tI-P64001, coated with colored aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4402 Aviation series - Locked bolts, 100 ° countersunk normal head, shear strength type, tight tolerances, made of titanium alloy tI-P64001, coated with colored aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 2546 Aviation series-Washers-Corrosion-resistant steel radial knurled lock-Dimensions

TS EN 2549 Aviation series-Anodic oxidation, lubricated with mos2, normal hexagon head, tight tolerance, normal body, short threaded bolts with alloy titanium-Classification: 1100 mpa (at ambient temperature / 315 ° c)

TS ISO 9199 Aviation - Nuts, double hexagonal, self-locking, with mj teeth, classification: 100 mpa (at ambient temperature) / 425 ° c, 1100 mpa (at ambient temperature) / 650 ° c, 1210 mpa (at ambient temperature) / 425 ° c, 1210 mpa (at ambient temperature) / 730 ° c, 1550 mpa (at ambient temperature) / 235 ° c, 1550 mpa (at ambient temperature) / 425 ° c and 1550 mpa (at ambient temperature) / 600 ° c - Dimensions

TS ISO 4095 Aviation - Double hexagon wrenches - Disassembly / assembly configuration - Metric series

TS ISO 7995 Aviation - Nuts, hexagon, self-locking, with mj threads, classification: 1100 mpa (at ambient temperature) / 235 ° c, 1100 mpa (at ambient temperature) / 315 ° c and 1100 mpa (at ambient temperature) / 425 ° c - Dimensions

TS ISO 3191 Aviation - Retaining nuts - Self-locking, fixed, single-eared, in reduced series, with countersunk, mj thread, classification: 1100 mpa (ambient temperature) / 235 ° c, 1100 mpa (ambient temperature) / 315 ° c and 1100 mpa (at ambient temperature) / 425 ° c - Dimensions

TS ISO 3161 Aviation - Unj screws - General specifications and limit dimensions

TS ISO 8538 Aviation - Nuts, hexagon, self-locking, with countersunk and fixed washers, with mj teeth, classification: 1100 mpa (at ambient temperature) / 235 ° c, 1100 mpa (at ambient temperature) / 315 ° c and 1100 mpa (ambient) temperature) / 425 ° c - Dimensions

TS ISO 7403 Aviation - Wedge ways - Unscrew configuration - Metric series

TS ISO 7481 Aviation - Nuts, self-locking, with a maximum operating temperature of 425 ° c or lower - Test methods

TS EN 2882 Aviation series - Nuts, hexagon, self-locking, countersunk and fixed washer, made of steel, cadmium-plated, with mos2 lubrication - Classification: 1100 mpa

TS EN 3536 Aviation series - Nuts, hexagon, self-locking, heat resistant, with mos2 lubrication - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3626 Aviation series - Nuts, hexagon, self-locking, steel, cadmium-plated, with mos2 lubrication - Classification: 1100 mpa

TS EN 2647 Aviation series-Cadmium plated, lubricated with mos2, alloy steel, with ball seat, self-locking hex nuts - Classification; 900 mpa (at ambient temperature / 235 ° c) x

TS EN 3913 Aviation series - Stud, thin-walled, self-locking, short, heat-resistant nickel eas alloy made of NI-PH2601 (Ni-P100HT, Inconel 718) with internal thread silver-plated for component separation

TS EN 3712 Aviation series - Nuts, with studs, self-locking, single ear, fixed, reduced series, countersunk, made of steel, cadmium plated, lubricated with MoS2 - Classification: 1100 MPa (at ambient temperature) / 235 ° C

TS EN 2786 Aviation series - Electrolytic silver coating of fasteners

TS EN 2898 Aviation series - Corrosion and heat resistant steel rivets - Technical specifications

TS EN 2941 Aviation series - Nickel alloy rivets - Technical specifications

TS EN 3017 Aerospace series - Washers, overlapping - Heat resistant steel

TS EN 3043 Aviation series - Fasteners made of external threaded, heat-resistant steel fe pa92ht (a286) - Classification: 900 mpa / 650 ° c, optional manufacturing method - Technical specifications

TS EN 3148 Aviation series - Countersunk nuts, self-locking, with flange holder - Assembly process

TS EN 3201 Aviation series - Holes for metric threaded fasteners - Design standard

TS EN 3293 Aviation series - Bolts, t-head, tight tolerance, medium screw length, heat-resistant nickel-plated alloy made of nI-P100ht (inconel 718), uncoated - Classification: 1275 mpa / 650 ° c

TS EN 3302 Aviation series - Bolts made of heat-resistant steel fe-Pm1708 (fv535) - Classification: 1000 mpa / 550 ° c - Technical specifications

TS EN 3326 Aviation series - Bolts, d-head, tight tolerance, medium thread length, made of heat-resistant nickel-based alloy nI-Ph2601 (inco 718) - Classification: 1275 mpa / 650 ° c, uncoated

TS EN 3328 Aviation series - Screws, double sided hexagon head, tight tolerance, medium thread length, made of heat-resistant steel fe-Pm38 (fv535), uncoated - Classification: 1000 mpa / 550 ° c

TS EN 3368 Aviation series - Aviation design standard - Holes for mounting pins

TS EN 3637 Aviation series - Nuts, self-locking, semi-hexagonal (reduced on both sides), made of heat-resistant nickel-based alloy -NI-P101HT (Waspaloy), silver-plated: Classification: 1210 MPa / 730 ° C

TS EN 3685 Aviation series - Bolts made of heat-resistant steel fe-Pa2601 (a286) - Classification: 1100 mpa / 650 ° c - Technical specifications

TS EN 3728 Aviation series - Shaft nuts, self-locking, threaded to the left, made of heat-resistant steel FE-PA92HT (A286), silver-plated

TS EN 3782 Aviation series - Holes for 100 ° countersunk screws - Design standard

TS EN 3905 Aviation series - Hexagonal wrenches for bolts - Technical specifications

TS EN 3914 Aviation series - Stud, thin wall-thickness, self-locking, long, heat-resistant nickel alloy made of NI-PH2601 (NI-P100HT, inkonel 718), silver-plated with internal threads, for scrapping of components

TS EN 4399 Aviation series - Bracelets, threaded, self-locking, made of heat-resistant steel FE-PA92HT (A286), silver-plated

TS EN 4493 Aviation series - Studs, threaded, helical-shaped, self-locking, heat-resistant nickel-based alloy ni-Ph1801 (ni- P96ht, nimonic 90) made of silver-plated

TS EN 3017 Aviation series - Washers, overlapping surface / sealing - heat resistant steel

TS EN 2945 Aviation series - ferrules, screw, helical winding, self-locking - Assembly process

TS EN 3044 Aviation series - Insertion holes for ferrules, threaded, helical wound, self-locking - Design standard

TS EN 3298 Aviation series - Ferrules, thin-walled, self-locking, assembly and disassembly

TS EN 3323 Aviation series - Double hexagon head bolts, long thread with unthreaded housing - Made of heat-resistant steel fe-Pm 38 (fv 535) - Classification: 1000 mpa / 550 ° c

TS EN 4071 Aviation series - Bolts with normal hex head, close-tolerant, unshielded, short-length thread, titanium alloy, aluminum kapvid coating - Classification: 1100 mpa (at ambient temperature) / 425 ° C

TS EN 4127 Aviation series - Bolts, normal hex head, coarse tolerant, unshielded body, short length thread, titanium alloy, aluminum kapvid coating - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 4129 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded, medium length thread, made of alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 ° C

TS EN 4634 Bolts, made of fe-Pa100 (a2601), with 286 ° countersunk head, six log, short screw, heat-resistant steel -Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 3539 Aviation series - Nuts, bolt, self-locking, single ear, fixed, countersunk, made of heat-resistant steel, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 2863 Aviation series - Nuts, stud, self-locking, fixed, upright, countersunk, made of heat-resistant steel, lubricated with MoS2 - Classification: 1100 MPa (at ambient temperature) / 315 ° C

TS EN 2866 Aviation series - Nuts, bolt, self-locking, floating, with one ears, countersunk, steel, cadmium-plated, lubricated with mos2- Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4078 Aviation series- Studs, threaded, thin-walled, locked and self-locking, made of heat-resistant steel, lubricated with mos2- Classification 1 100 mpa (ambient temperature) / 315 ° C

TS EN 4084 Aviation series - Nuts, self-locking with studs, two ears, countersunk, alloy steel, coated with cadmium, lubricated with MoS2- Classification 1100 mpa (ambient temperature) / 235 ° C

TS EN 4163 Aviation series-Bolts, 100 ° with countersunk head, loosened from the axis of the housing, coarse tolerance normal body, long thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 3750 Aviation series - Nuts, bolt-on, self-locking, fixing, 90 ° angled series, countersunk, self-adjusting, made of heat-resistant steel, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3229 Aviation series - Nuts, straight, reduced height, with normal flat surfaces, made of steel, with cadmium-plated, left hand thread- Classification: 900 MPa (at ambient temperature) / 235 ° c

TS EN 4234 Aviation series - Clamps, thread - Dimensions, masses

TS EN 4624 Aviation series - ferrules, mj gears, self-locking, self-drilling key, heat-resistant nickel-based alloy nı-Ph1302 (waspaloy), silver plated

TS EN 4138 Aviation series- Screws, flat head, cross-shaped housing, coarse tolerance normal body, medium length thread, made of steel alloy, cadmium-plated-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 3777 Aerospace series - Pins, quick release, single and double running - Specifications

TS EN 3843 Aviation series-Nuts; Twelve corners, self-locking, countersunk heat-resistant, passivated- Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 3238 Aviation series - Metallic materials - Test methods - Tear test for wires and rivets

TS EN 4673-001 Aviation series - ferrules, unj gears, self-locking, self-drilling wrench - Part 001: Assembly and disassembly

TS EN 4673-002 Aviation series - ferrules, unj gears, self-locking, self-drilling - Part 002: Design standard

TS EN 4673-004 Aviation series - ferrules, UNJ gears, self-locking, with self-drilling wrench - Part 004: NI-P100HT (Inconel 718), alloy-based temperature-resistant nickel, silver plated

TS EN 4673-005 Aviation series - ferrules, unj gears, self-locking, with self-drilling wrench - Part 004: temperature-resistant nickel, silver plating based on Ni-P100ht (waspaloy) alloy

TS EN 4136 / AC Aviation series - Bolts, double hexagon head, coarse tolerant thread, long thread, steel alloy, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN ISO 4498 Sintered metal materials (excluding hard metals) - Determination of apparent hardness and microhardness

TS EN 2367 Aviation series - Steel splint pins

TS EN 2549 Aviation series - Bolts, hexagon head, narrow tolerance normal body, short screw, made of titanium alloy, anodized, lubricated with mos2 - Classification: 1 100 mpa (at ambient temperature) / 315 ºc

TS EN 2647 Aviation series-Cadmium plated, lubricated with mos2, alloy steel, with ball seat, self-locking hex nuts - Classification; 900 mpa (at ambient temperature / 235 ° c) x

TS EN 2647 Aviation series-Nuts, hexagonal, self-locking, with ball bearing surface, made of alloy steel, cadmium-plated, lubricated with mos2-Classification; 900 mpa (at ambient temperature) / 235 ° c

TS EN 2786 Aviation series - Electrolytic silver coating of fasteners

TS EN 2859 Aviation series - Bolts, hexagon head, tight tolerant body, short thread, made of alloy steel, cadmium plated, metric series - Classification: 1100 mpa (at ambient temperature) / 235 0 c

TS EN 2888 Aviation series - Bolts made of corrosion-resistant steel with short hexagonal head, coarse tolerance, normal thread, passivated-Classification: 600 mpa (at ambient temperature) / 425 ° c

TS EN 2942 Aviation series - Ferrules, screw thread, helical winding, self-locking, heat-resistant nickel-based alloy made of NI-PH2801 (Inconel X 750), silver-plated

TS EN 2882 Aviation series-Nuts, hexagon, self-locking, countersunk and fixed washer, made of steel, cadmium-plated, lubricated with mos2-Classification: 1100 mpa (at ambient temperature) / 235 ºc

TS EN 3034: 2009 / AC Aviation series - Nuts, self-locking, with washer, hexagonal, made of heat-resistant steel fe-Pa92ht (a286), silver-plated - Classification: 1100 mpa / 425 ° c

TS EN 3005 Aviation series - Nuts, self-locking, with mj screw, made of temperature-resistant nickel-based alloy nI-Ph1302 (waspaloy), silver plated or uncoated - Classification: 1210 mpa (at ambient temperature) / 730ºc - Technical specifications

TS EN 3008 Aviation series - Bolts, hexagonal head, lightweight body, long toothed, heat resistant nickel based alloy nı-P100ht (inconel 718) - Classification: 1275mpa (at ambient temperature) / 650 oc

TS EN 3010 Aviation series-Bolts, hexagonal head, lightweight body, long teeth, heat-resistant nickel-based alloy nI-made of P101ht (waspaloy) -Classification: 1210 mpa (at ambient temperature) / 730 c

TS EN 3016 Aviation series - Washers, countersunk, load distributor - Heat resistant steel

TS EN 3152 Aviation series - Nuts, self-locking, MJ threads, made of heat-resistant steel FE-PA2601 (A286), with or without silver coating - Classification: 1100 MPa (at ambient temperature) / 425 oC - Technical specifications

TS EN 3293 Aviation series - Bolts - T-head, tight tolerant, medium screw length, heat-resistant nickel-based alloy made of nI-P100ht (inconel 718), without coating - Classification: 1 275 mpa / 650 ºc

TS EN 3301 "aviation series - Bolts, t-head, tight tolerance, medium thread length, made of heat-resistant fe-Pm1708 (fv535) steel, uncoated - Classification: 1000 mpa / 550 ° c"

TS EN 3302 Aviation series - Bolts made of heat-resistant steel fe-Pm1708 (fv535) - Classification: 1000 mpa / 550 ° c - Technical specifications

TS EN 3323 Aviation series - Double hexagon head bolts made of fe-Pm 38 (fv 535) with thinned body, long screw, temperature resistant steel - Classification: 1 000 mpa / 550 ºc

TS EN 3324 Aviation series - Bolts, hexagon head, hollow body, long thread, made of heat-resistant fe-Pm1708 (fv535) steel - Classification: 1000 mpa / 550 oc - Uncoated

TS EN 3327 Aviation series - Bolts, double sided hexagon head, tight tolerance, medium thread length, made of heat-resistant nickel-based alloy ni-Ph100ht (inconel 718), uncoated - Classification: 1275 mpa / 650 ° c

TS EN ISO 3035 Corrugated cardboard - Determination of surface crush strength

TS EN 3385: 2012 (EN) Aviation series - Piston rings, external, axial insertion, steel, vacuum-plated

TS EN 3386: 2012 (EN) Aviation series - Circlips, angular positioning, steel, phosphate coated

TS EN 3417 Aviation series - Rivets, solid, multi-purpose head, made of nickel easali alloy nip11, metric series

TS EN 3707: 2012 (EN) Aviation series - Headless threaded plugs - Inserting holes

TS EN 3706: 2012 Aviation series - Headless threaded plugs, cross-recessed, made of aluminum alloy 5086

TS EN 3768: 2012 (EN) Aviation series - Nuts, fastened, self-locking, single ear, fixed, reduced series, countersunk, made of heat-resistant steel, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3718 Aviation series - Test method for metallic materials - Ultrasonic inspection of tubes

TS EN 4443 Aviation series - Nuts, elliptical, self-locking, mj threaded, made of heat-resistant steel fe-Pa2601 (a286), with mos2 coating - Classification: 900 mpa (at ambient temperature) / 425 ° c

TS EN 3382: 2012 (EN) Aviation series - Circlips, internal, axial insertion, steel, phosphate coated

TS EN 3383: 2012 (EN) Aviation series - Piston rings, internal, axial insertion, steel, vacuum-plated

TS EN 3052 Aviation series-Bolts, hexagon head, narrow tolerance normal body, short screw, made of heat and corrosion resistant steel, passivated-Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3019 Aviation series - Self-locking flat nuts, floating, with two ears, made of heat-resistant steel fe-Pa92ht (a286), silver plated - Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 3384 Aviation series - Piston rings, external, axial insertion, steel, phosphate coated

TS EN 3019 Aviation series - Self-locking flat nuts, curved, with two ears, made of heat-resistant steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature) / 650 oC

TS EN 3241 Aviation series - Nuts, self-locking, with clamp, made of heat-resistant steel FE-PA 92 HT (A 286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 ° C

TS EN 3033 Aviation series - Nuts made of heat-resistant steel FE-PA2601 (A286), self-locking with hexagonal washer, uncoated - Classification: 1100 mpa / 425 ° C

TS EN 2648 Aviation series-Washer, concave, alloy steel, cadmium coated

TS EN 2930 Aviation series-Bolts, double hexagonal head, free body, long screw thread, heat-resistant nickel-based alloy nI-P101ht (waspaloy), silver plated-Classification: 1210 mpa (ambient temperature) / 730 ° c

TS EN 16602-70-46: 2014 Space product assurance - Requirements for the production and supply of threaded connectors

TS EN 6090 Aviation Series - Washer, Fixing

TS EN 6092 Aviation Series - Electrical Outlet, Non-Fixed, Double Claw

TS EN 6129 Aviation Series - Blind Rivet, High Strength, Pull Type

TS EN 6105 Aviation Series - Nail Stud

TS EN 6101 Aviation Series - Rivet, 100 ° Medium Size Countersunk Head, Tight Tolerant - Inch Series

TS EN 6081 Aviation Series - Rivet, Universal Head, Tight Tolerant - Inch Series

TS EN 6080 Aviation Series - Rivet, 100 ° Normal Flat Head, Tight Tolerance - Inch Series

TS EN 6094 Aviation Series - Washer, Spring, Recessed

TS EN 4072 / AC Aerospace series - Screws, 100 ° with normal countersunk head, with rounded edges, plus tolerant housing, tight tolerant body, short titanium alloy thread, IVD coated - Classification: 1 100 Mpa (at ambient temperature) / 425 ° C

TS EN 4178 Aviation series - Screws, flat head, six lobe housing, coarse tolerant body, medium length thread, titanium alloy, anodised, MoS2 oiled - Classification: 1 100 Mpa (at ambient temperature) / 315 ° C

TS EN 6129 / AC Aviation series - Blind rivet, protruding head, high strength, pull type

TS EN 2879 Aviation series - Nuts, fasteners, self-locking, weather-resistant, insulated, non-fixed, two-pronged, countersunk, corrosion-resistant steel, passivated, MoS2 oiled - Classification: 900 Mpa (at ambient temperature) / 235 ° C

TS EN 4297 Aviation series - Nuts, hexagon, self-locking plastic ring, normal height, normal cross flats, corrosion resistant steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 ° C

TS EN 2811 Aviation series - Nuts, hexagonal, corrugated / notched cadmium-coated steel - Classification: 1 100 MPa / 235 ° C

TS EN 3902 Aviation series - washers for rivet bolt assembly, aluminum alloy, anodized, metric series

TS EN 4309 Aviation series - Nuts, hexagonal, self-locking plastic ring, of normal height, with normal cross flats, made of alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 120 ° C

TS EN 3672 Aviation series - Housing nuts, self-locking, heat-resistant nickel-based NI-P101HT alloy, silver plated, for 30 ° C stamping - Classification: 1 200 Mpa (at ambient temperature) / 730 ° C

TS EN 3903 Aviation series - Plate washers, made of corrosion-resistant steel

TS ISO 245 Aircraft safety wire - Dimensions

TS EN 2044 Aviation series - Round bars - Extruded from aluminum and aluminum alloys - Tolerance class h 11 - diameter 4 mm? D ? 63 mm - Dimensions

TS EN 2138 Aviation series-Washer, for plain-Cadmium-coated steels

TS EN 2143 Aviation series - Rivets, full, universal head, 1050a aluminum, inch based series

TS EN 2144 Aviation series - Rivets, solid, universal head, inch based series of aluminum 2117 alloy

TS EN 2145 Aviation series - Rivets, anodized or chrome-plated, inch-based series of universal 2117 aluminum alloy head

TS EN 2146 Aviation series - Rivets, full, universal head, 2017a aluminum, inch based series

TS EN 2148 Aviation series - Rivets, full, universal head, 5056a aluminum, inch based series

TS EN 2236 Aviation series - Pins, head, body with tight tolerance, made of alloy steel - Technical specifications

TS ISO 2285 Tension set under rubber-vulcanized or thermoplastic tensile load, elongation and creep determination of tensile set under constant elongation

TS EN 2286 Aviation series - Bushings - Flanged - Self-lubricating aluminum alloy - Dimensions and loads

TS EN 2309 Aviation series-Hole dimensions for solid rivets

TS EN 2327 Aviation series - Washers, with lock, radial thread, made of alloy steel, cadmium-plated, for flight control rods - Dimensions

TS EN 2328 Aviation series-Washers, with wing flaps for flight control rods-Dimensions

TS EN 2353 Aviation series - Screw couplings, control cables made of corrosion-resistant steel - Dimensions and loads

TS EN 2355 Aerospace series - Tensioner element - Fork end - Threaded - Made of corrosion resistant steel - Dimensions and loads used in control cables

TS EN 2356 Aviation series-Prongs, threaded, corrosion-resistant steel with swivel bearing control cable

TS EN 2365 Aviation series - Bracelets - Aluminum alloy

TS EN 2367 Aviation series - Steel couplings

TS EN 2413 Aviation series-Cadmium plated, alloy steel, thin hex head, tight tolerant body, short threaded bolts-Classification: 1100 mpa (at ambient temperature / 235 ° c)

TS EN 2546 Aerospace series - Washers, made of corrosion-resistant steel, locked with radial teeth, used in flight control rods, passivated - Dimensions

TS EN 2550 Aviation series - Rivets, filled, curved 100 grade normal countersunk head, based on 1050 a aluminum inc

TS EN 2551 Aviation series - Rivets, solid, dished 100 grade normal countersunk head, 2117 aluminum anodized or chrome plated, inc

TS EN 2552 Aviation series - Rivets, solid, dished 100 grade normal countersunk head, 2117 aluminum anodized or chrome plated, inc

TS EN 2553 Aviation series - Rivets, filled, curved 100 grade normal countersunk head, 2117a aluminum alloy, inc based

TS EN 2555 Aviation series - Rivets, filled, convex 100degree normal countersunk head, 5056a aluminum alloy, inc

TS EN 2556 Aviation series - Rivets, filled, dished 100 grade normal countersunk, 5056a aluminum alloy, inc, anodized or chrome plated

TS EN 2569 Aviation-Control cable adjustments and sleeves - Technical specifications

TS EN 2583 Aviation series bolts - Mj threaded, heat resistant nickel based alloy - Made of Ph 2601 (inconel 718) - Classification 1275 mpa (at ambient temperature) / 650 oc - Technical specifications

TS EN 2586 Aerospace series - Stamps - Flight control rods for locking purposes - Dimensions

TS EN 2602 Aviation series - Outputs for adapters with threaded, spring washers - Geometric configuration

TS EN 2603 Aviation series - Outlets for adapters with threaded, spring washers - Geometric configuration

TS EN 2604 Aviation series - 8 ° 30 'interface for adapters with threaded spring washers - Geometric configuration

TS EN 2605 Aviation series - 24 ° interface for adapters with threaded, spring washers - Geometric configuration

TS EN 2606 Aviation series - 60 ° interface for adapters, locking, threaded - Geometric configuration

TS EN 2607 Aviation series - washers for adapters with threaded, spring washers - Inspection

TS EN 2608 Aviation series - Installation and removal guidelines for 8 ° 30 'adapters with threaded spring washers

TS EN 2609 Aerospace series - Slewing sleeves, control cables made of copper and zinc alloy - Dimensions and loads

TS EN 2645 Aviation series - Installation and removal guidelines for 8 ° 30 'adapters with threaded spring washers - Dimensions

TS EN 2649 Aviation series - Cadmium-plated, alloy steel, screw-to-head, grooved, flat head screws classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 2650 Aerospace series-Passivated, corrosion-resistant steel, with threaded head, flat head screws - Classification: 600 mpa (at ambient temperature) / 425 ° c

TS EN 2652 Aviation series - Screws, 100 embedded normal head, split, cadmium plated steel alloy head gear - Classification 900 mla (at ambient temperature) 235c

TS EN 2653 Aviation series-Passivated, corrosion-resistant steel, up-to-screw, threaded, 100 degree countersunk normal head screws-Classification: 600 mpa (at ambient temperature) / 425 ° c

TS EN 2654 Aviation series-Solid brass tin-plated, screw-in head, self-tapping, 100 degree countersunk normal head screws-Classification: 380 mpa (at ambient temperature) / 80 ° c

TS EN 2680 Aviation series - Retaining nuts - Self-locking, floating, self-adjusting, with two ears, made of alloy steel, cadmium-plated, with mos2 lubrication - Classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 2753 Aviation series; Cadmium-plated, self-locking, self-locking, countersunk nuts with countersink, mos2 lubricated-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 2754 Aviation series - Retaining nuts - Self-locking, two ears, countersunk - Classification: 1100 mpa / 235 ° c

TS EN 2852 Aviation series-Nuts, hexagonal, straight, at normal height, with normal spanner, made of heat-resistant steel-Classification: 1100 mpa / 650 ° c

TS EN 2856 Aviation series - Fastening nuts - Self-locking, fixed, angular, in reduced series, countersunk - Classification: 1100 mpa / 235 ° c

TS EN 2862 Aviation series - Nuts, bolt-on, self-locking, secured, with 90 ° corner, countersunk steel alloy, cadmium-plated, lubricated with mos2- Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 2865 Aviation series - Nuts, bolt, self-locking, floating, with two ears, countersunk, made of heat-resistant steel, lubricated with mos2- Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 2867 Aviation series - Nuts, bolt, self-locking, floating, with one ears, countersunk, made of heat-resistant steel, lubricated with mos2- Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 2869 Aviation series - Hexagonal, grooved / crowned, height normal, with normal key mouth, made of temperature-resistant steel, passivated-Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 2881 Aviation series - Retaining nuts - Self-locking, fuel-resistant, sealed, floating, two-ears, countersunk, made of corrosion-resistant steel, chemically passivated, with mos2 lubrication - Classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 2883 Aerospace series - Nuts, self-locking, with hexagon bolt and two lugs, hexagonal, heat resistant steel, lubricated with mos2 - Classification: 1100 mpa (ambient temperature) / 315 ° c

TS EN 2884 Aviation series-Bolts, cylindrical head, with rounded edges off the axis of the housing, with a coarse tolerance normal body, short screw, made of titanium alloy, made of anodic coating, lubricated with mos2-Classification: 1100 mpa (at ambient temperature) / 315 C

TS EN 2889 Aerospace series - Bolts with normal hexagon head, coarse tolerance, normal body, short threaded alloy steel, cadmium plated - Classification: 900 mpa (ambient temperature) / 235 ° c

TS EN 2897 Aviation series-Bolts with rounded corners, truncated cone, rounded edges, plus-shaped, narrow-tolerant, normal body, short thread, made of steel alloy, cadmium plated-Classification: 1100 mpa (at ambient temperature) 235 ° c

TS EN 2898 Aviation series - Corrosion and heat resistant steel rivets - technical specifications

TS EN 2910 Aviation series-Casing nuts, self-locking, made of heat-resistant fe-Pa92ht (a286) steel-Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 2911 Aviation series-Casing nuts, self-locking, made of heat-resistant fe-Pa92ht (a286) steel, silver-plated Classification: 1100 mpa (at ambient temperature) / 650 ° c

tst EN 2913 Aviation series - Cadmium coated flat and large diameter washers of alloy steel

TS EN 2913 Aviation series - Cadmium-coated flat and large diameter washers in alloy steel

TS EN 2927 Aviation series - Bolts, double hexagon head, thinned body, long screw, made of heat-resistant nickel-based alloy - Made of P100ht (inconel 718) - Classification: 1275 mpa (at ambient temperature) / 650 ° c

TS EN 2929 Aviation series - Bolts, hexagon head, free body, long thread, made of heat-resistant nickel-based alloy (nı-P-101ht), classification: 1210 mpa (ambient temperature) / 730 ° c

TS EN 2930 Aviation series - Bolts, double hexagon head, thinned body, long screw thread, heat-resistant, made of nickel-based alloy (nı-P-101ht, waspaloy), silver plated- Classification: 1210 mpa (at ambient temperature) / 730 ° c

TS EN 2933 Aviation series- Bolts with t-head, tapered body, long thread, heat-resistant, made of nickel-based alloy, nı-P100ht (inconel 718) - Classification: 1 275 mpa (at ambient temperature) / 650 ° c

TS EN 2934 Aviation series - Bolts with t-head, thinned body, long thread, made of heat-resistant nickel-based nI-P100ht (inconel 718) alloy, silver plated classification: 1275 mpa (at ambient temperature) / 650 ° c

TS EN 2935 Aviation series - Bolts with t-head, tapered body, long thread, heat-resistant, made of nickel-based alloy, nI-P101ht (waspaloy) - Classification: 1 210 mpa (at ambient temperature) / 730 ° c

TS EN 2936 Aviation series - Bolts with t-head, thinned body, long thread, made of heat-resistant nickel-based alloy, silver plated (nı-P101ht waspaloy) - Classification: 1210 mpa (at ambient temperature) / 730 ° c

TS EN 2937 Aviation series-Bolts, hexagon head, screw-up, made of heat-resistant steel fe-Pa92 ht (a286) -Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 2938 Aviation series-Bolts, hexagon head screwed up, head made of heat-resistant steel, fe-Pa 92 ht (a286)-Silver plated-Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 2940 Aviation series-Bolts, 100 ° with countersunk head, screwed up to the head axis, screwed up to the head, made of heat-resistant steel fe-Pa92 ht (a286), silver-plated-Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 2941 Aviation series - Nickel alloy rivets - Technical specifications

TS EN 2943 Aviation series - Ferrules, screw, helical wound, self-locking - Technical features

TS EN 2944 Aviation series - ferrules, screw, helical winding, self-locking, made of corrosion-resistant steel (fe-Pa3004)

TS EN 2948 Aviation washers, adjustable, heat-resistant steel, passivated

TS EN 3009 Aviation series - Bolts, hex head, lightweight housing, long teeth, heat-resistant nickel-based alloy nI-P100ht (inconel718), silver-plated- Classification: 1275 (at ambient temperature) / 650c

TS EN 3011 Aviation series - Bolts, hexagonal head, lightweight housing, long teeth, heat resistant nickel-based alloy nI-P101ht (waspalay), silver plated- Classification: 1210mla (at ambient temperature) / 730 c

TS EN 3016 Aviation series - Washers, countersunk, load distributor - Heat resistant steel

TS EN 3020 Aviation series - Self-locking flat nuts, floating, with two ears, made of heat-resistant steel fe-Pa92ht (a286), silver plated - Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 3033 Aviation series - Nuts, self-locking, hexagon, fixed washer, made of heat-resistant steel fe-Pa2601 (a286), uncoated - Classification: 1100 mpa / 425 0c

TS EN 3034 Aviation series - Nuts, self-locking, with washer, hexagon - Made of heat-resistant steel fe-Pa92ht (a286), silver-plated - Classification: 1100 mpa / 425 ° c

TS EN 3038 Aviation series-Bolts made of tempered and corrosion-resistant steel with cylindrical head, with narrow edges, normal body, short screw, passivated, with low tolerance, Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3043 Aviation series - Fasteners, external threaded, made of heat-resistant fe pa92ht (a286) steel - Classification: 900 mpa / 650 ºc, optional manufacturing method - Technical specifications

TS EN 3063 Aviation series-Bolts, double hexagon head, close tolerance body, medium length thread, heat-resistant nickel-based alloy nI-Made of P101 ht (waspaloy) -Classification: 1210 mpa (at ambient temperature) / 730 ° c

TS EN 3112 Aviation series-Bolts, hexagon head, threaded, steel alloy, cadmium plated-Classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 3136 Aviation series - Rivets, solid, universal head, corrosion-resistant fe-Pa92ht steel, passivated, inch-based series

TS EN 3138 Aviation series - Rivets, filled, 100 ° countersunk normal dome shape head, corrosion-resistant fe-Pa2601 steel, passivated, inch-based series

TS EN 3141 Aviation series- Rivets, solid, universal head, heat-resistant nickel based nı-P11 alloy, cadmium-coated, inch-based series

TS EN 3148 Aviation series - Housing nuts, self-locking, with flange holder - Assembly process

TS EN 3151 Aviation series-Fixing pins-Flat, heat-resistant nI-P100ht made of nickel-based alloy

TS EN 3152 Aviation series - Nuts, self-locking, with mj screw, fe-Pa2601 (a286), silver-plated in temperature-resistant steel - Classification: 1100 mpa (at ambient temperature) / 425 ° c technical specifications

TS EN 3201 Aviation series - Holes for metric screw fasteners - Design standard

TS EN 3226 Nuts, hexagonal, straight, at normal height, normal cross planes, steel, cadmium plated - Classification 1100 mpa / 235 ° c

TS EN 3227 Aviation series - Nuts, hexagonal, straight, normal height, with normal key nose, made of steel, cadmium-plated, threaded to the left-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 3228 Aviation series - Nuts, hexagonal, flat, with reduced height, normal flat surfaces, made of steel, with cadmium coating - Classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 3230 Aviation series - Nuts, hexagon, crown / groove, height reduced, with normal key blade, made of steel, coated with cadmium, - Classification: 900 mpa (at ambient temperature) / 235? C

TS EN 3236 Aviation series - Thimbles, thin-walled, self-locking, long, heat-resistant nickel-based Ni-P100ht (inconel718) silver-coated internal thread

TS EN 3237 Aviation series - Thimbles, thin-walled, self-locking, long, heat-resistant nickel-based Ni-P100ht (inconel718), silver-coated internal thread

TS EN 3239 Aviation series-Nuts; Twelve-point, self-locking, heat-resistant nI-P101ht (waspaloy) made of nickel-based alloy, silver plated-Classification: 1210 mpa (at ambient temperature) / 730 ° c

TS EN 3240 Aviation series - Nuts, self-locking, with clamp, made of heat-resistant steel fe-Pa2601 (a286), uncoated - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3294 Aviation series - Bolts, t-head, tight tolerance, made of heat-resistant nickel-plated alloy nI-P100ht (vaspaloy), uncoated for nuts with increased height - Classification: 1210 mpa / 730 ° c

TS EN 3297 Aviation series - Thimbles, thin-walled, self-locking, mj threaded, heat-resistant nickel-based alloy ni - Made of P100ht (inconel 718) - Technical specifications

TS EN 3299 Aviation series - Seal rings and threaded rings, self-locking, with right- or left-handed mj teeth, made of fe-Pa2601 (a286) resistant steel, silver plated - Technical specifications

TS EN 3304 Aviation series-Bolts, 100 * with countersunk head with slanted head, fringed edges, normal tolerance, short thread, titanium alloy, anodized, mos2 lubricated-Classification: 1100 mpa (at ambient temperature) / 315 * c

TS EN 3305 Aviation series-Bolts, 100 * with countersunk head with slanted head, frayed edges, normal housing, short thread, alloy steel and cadmium plated-Classification: 1100 mpa (at ambient temperature) / 235 0c

TS EN 3306 Aviation series - Bolts, 100 ° countersunk normal head, with edges offset from the slot axis in the shape of a cross, threaded up to the bolt head, titanium alloy anodized, mos <2> lubricated - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3307 Aviation series - Bolts, flat head, cross-slotted edges off the slot axis, threaded up to the bolt head, titanium alloy, anodized, mos <2> oiled - Classification: 1100mpa (at ambient temperature) / 315 ° c

TS EN 3308 Aviation series - Bolts, cylindrical head, hexagon socket, coarse tolerance, normal body, medium length thread, alloy steel and cadmium plated - Classification: 1100 mpa (at ambient temperature) ° c

TS EN 3325 Aviation series - Bolts with t-head, hollow body, long thread, made of heat-resistant steel fe-Pm1708 (fv535) - Classification: 1000 mpa / 550 ° c - Uncoated

TS EN 3368 Aviation series - Aviation design standard - Holes for fixing pins

TS EN 3379 Aviation series-Bolts, with twelve corners, narrow tolerance normal body, medium length thread, made of heat-resistant nickel-based alloy, for height-increased nuts-Classification: 1210 mpa (at ambient temperature) / 730 ° c) / 730 C

TS EN 3388 Aviation series - Fasteners made of externally threaded, heat-resistant nickel-based alloy nI-Ph2601 (inconel 718) - Classification 1275 mpa / 650 ° c - Optional manufacturing method - Technical specifications

TS EN 3389 Aviation series - Fasteners made of externally threaded, heat-resistant nickel-based alloy nI-Ph1302 (waspaloy) - Classification 1210 mpa / 650 ° c - Optional manufacturing method - Technical specifications

TS EN 3425 Aviation series - Groove dimensions for axial insertion of internal washers

TS EN 3426 Aviation series - Groove dimensions for axial positioning of external washers

TS EN 3427 Aviation series - Groove dimensions for angular positioning of retaining washers

TS EN 3431 Aviation series - Nuts, hexagonal, self-locking, with slotted and connecting washer, made of heat-resistant steel, silver-plated classification: 100 mpa (at ambient temperature) / 425 ° c

TS EN 3435 Aviation series - Nuts, bolts, floating, two ears, self-locking, countersunk, made of heat-resistant steel, lubricated with mos2- Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3444 Aviation series - Bolts, large hexagonal head, normal body with tight tolerances, heat resistant nickel-based alloy with thread lengths, chemically passivated - Classification: 1250 mpa (at ambient temperature) / 650 ° c

TS EN 3537 Aviation series - Nuts, bolt, self-locking, fixed, with two ears, countersunk, made of heat-resistant steel, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3538 Aviation series - Nuts, bolt, self-locking, fixed, with two ears, reduced series, countersunk, made of heat-resistant steel, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3542

TS EN 3611 Aviation series - Pipe ends - Sizes and connection type selection - Design standard

TS EN 3612 Aviation series-Grooved keyway-Design standard

TS EN 3613 Aviation series - Screws, with normal hex head, coarse tolerant, unshielded, long thread, nickel-based alloy nI-Ph2601 (inconel 718), made of steel, silver plated - Classification: 1275 mpa / 650 ° c

TS EN 3614 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, long thread, made of alloy steel, fe-Pa2601 (a286), silver plated - Classification: 900 mpa / 650 ° c

TS EN 3636 Aviation series - Screws, small flat head, cross-shaped housing, hollow body, long thread, heat-resistant steel fe-Pa92ht (a286), silver-plated - Classification: 900 mpa / 650 ° c

TS EN 3644 Aviation series-Rivets, solid, universal head, titanium ti-Po2, anodized inch based series

TS EN 3653 Aviation series - Nuts, bolt, hexagon, self-locking, floating, self-adjusting, single-eared, made of steel, coated with cadmium, lubricated with mos2 - Classification: 900 mpa (at ambient temperature) / 235 ° c

TS EN 3676 Aviation series - Thimbles, thin-walled, self-locking - design standard

TS EN 3685 Aviation bolts, heat-resistant steel fe - Made of Pa2601 (a286) - Classification 1100 mpa / 650 oc - Technical specifications

TS EN 3686 Aviation series - Bolts, hexagonal on both sides, hollow body, long thread, made of heat-resistant steel fe-Pa92ht (a286), silver-plated - Classification: 1100 mpa / 650 ° c

TS EN 3686 / AC Aviation series - Bolts, hexagonal head on both sides, long thread, made of heat-resistant steel fe-Pa92ht (a286), silver plated - Classification: 1 100 mpa / 650 ° c

TS EN 3687: 2010 Aviation series - Bolts with hexagon head, thinned body, long teeth, heat-resistant steel fe-Pa92ht (a286), silver plated-Classification: 1100 mpa / 650 ° c

TS EN 3696 Aviation series-Washers-Made of heat-resistant steel

TS EN 3709 Aviation series - Switches and sockets, hexagon - Technical specifications

TS EN 3721 Aviation series-Nuts, twelve corners, self-locking, deep countersunk, made of heat-resistant fe-Pa92ht (a286) steel, coated with mos2-Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3722 Aviation series-Housing nuts, self-locking, made of heat-resistant fe-Pa92ht (a286) steel, coated with mos2-Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3723 Aviation series-Nuts, hexagon, self-locking, made of heat-resistant fe-Pa92ht (a286) steel, coated with mos2-Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3729 Aviation series- Rings, threaded, self-locking, threaded to the left, made of heat-resistant steel fe-Pa92ht (a286), silver-plated

TS EN 3740 Aviation series-Bolts, shoulder, hexagon head, narrow tolerance normal body, short thread, made of titanium alloy, anodized, lubricated with mos2-Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 3741 Aviation series - Nuts, tightening, metric - Inserting holes and mounting

TS EN 3753 Aviation series - Nuts, with studs, self-locking, fixed, 60 ° angular countersunk, made of steel, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 3757 Aviation series - Nuts, self-locking, floating, self-locking, self-locking, two-eared, made of heat-resistant steel, lubricated with mos2- Classification mpa (ambient temperature) / 315 ° c

TS EN 3759 Aviation-Screws-Flat head, cross-turning, threaded, heat and rust resistant steel, passivated-Class: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3760 Aerospace series - Bolts, 100 ° with countersunk head, offset from the housing axis, screwed up to the head, made of heat and corrosion resistant steel, passivated-Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3763 Aviation series - Nuts, hexagon, self-locking, with ball bearing surface, made of heat-resistant steel, lubricated with mos2 - Classification: 900 mpa (at ambient temperature) / 315 ° c

TS EN 3782 Aviation series - Holes for 100 ° countersunk screws - Design standard

TS EN 3819 Aviation series - Safe distances for switches and sockets

TS EN 3834 Aviation series - Nuts, bolt, self-locking, floating, with two ears, countersunk, made of wear-resistant steel, lubricated with mos2- Classification: 900 mpa (at ambient temperature) / 315 ° c

TS EN 3832 Aviation series-Bolts made of nickel-based alloy nI-P100ht (inconel718) with double headed, thinned body, long screw and long screw - Classification: 1550 mpa (at ambient temperature) / 650 ° c

TS EN 3899 Aviation series - Inserts, wall thickness, self-locking, mj screw, heat-resistant steel fe-Pm3801 (17-4ph) - Technical specifications

TS EN 3907 Aviation series-Bolts, double hexagon head, normal body, long screw, made of titanium alloy tI-P64001, coated with mos2 - Classification: 1100 mpa (at ambient temperature) / 350 ° c

TS EN 3911: 2010 Aviation series - Six lobe slots - Geometric description

TS EN 3912 Aviation series - Bolts, flat head, hexagon, free end, made of heat-resistant fe-Pa2601 (fe-Pa92ht, a286), silver-plated - Classification 110 mpa (at ambient temperature) / 650 ° c

TS EN 3915 Aviation series - Stub, thin wall-thickness, self-locking, mj threaded, heat-resistant nickel alloy made of nı-Ph2601 (nı-P100ht, inkonel a286), for scrapping of components - classification 1275 mpa temperature) / 550 ° c - Technical specifications

TS EN 3916 Aviation series - Stud, thin wall thickness - Scrapping of components

TS EN 4009 Aviation series - NI-Ph2601 (inconel 718) - Bolts, double hexagon head, tightly tolerant body, medium in screw size, heat resistant nickel based alloy - Classification: 1550 mpa (at ambient temperature) / 650 ° c

TS EN 4072 Aviation series - Screws, 100 ° with countersunk head, cruciform printed, tight tolerant normal body, short thread, made of titanium alloy, coated with aluminum coloring - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 4073 Aviation series-Bolts, cylinder head, six-lobe housing, coarse tolerance normal body, medium length thread, made of steel alloy, cadmium-plated-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4074 Aviation series - Screws, bump head, six log, coarse tolerant normal body, medium length thread, in titanium alloy, coated with aluminum coloring - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 4075 Aviation series - Screws, flat head, cross-shaped housing, screwed up to the head, made of heat-resistant steel, - Classification: 490 mpa (at ambient temperature) / 425 ° c

TS EN 4108 Aviation series - Keys, crow nose, coupling socket, socket screw

TS EN 4109 Aviation series - Wrenches, bolt wrenches

TS EN 4110 Aviation series - Wrenches, open end, tenon

TS EN 4111 Aviation series - Socket wrenches for wrenches, studs, pipe connections - Technical specifications

TS EN 4113 Aviation series-Clamp-P type passivated with rubber seal made of corrosion-resistant steel-Dimensions-Masses

TS EN 4114 Aviation series-Clamps made of p-type aluminum alloy, rubber seal dimensions, masses

TS EN 4115 Aviation series-Rubber seals for clamps-Dimensions, masses

TS EN 4121 Aviation series - Casing nuts, self-locking, self-locking, made of temperature-resistant steel fe-Pa 92ht (a286), thread coated silver - Classification: 1100 mpa (at ambient temperature) / 650 ° c

TS EN 4125 Aviation series - Nuts, bolt-on, self-locking, fixed, with two ears, thinned series, countersunk, made of heat-resistant steel, lubricated with mos2- Classification: 900 mpa (at ambient temperature) / 315 ° c

TS EN 4126 Aviation series - Nuts, bolt-on, self-locking, floating, with two ears, thinned series, countersunk, made of heat-resistant steel, lubricated with mos2- Classification: 900 mpa (at ambient temperature) / 315 ° c

TS EN 4128 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, short length thread, heat-resistant nickel-based alloy, aluminum iv coated - Classification: 1100 mpa (at ambient temperature)

TS EN 4129 / AC Aerospace series - Bolts, normal hex head, coarse tolerant thread, medium length thread, made of alloy steel, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4130 Aviation series - Bolts, normal hex head, coarse tolerant thread with unshielded body, medium length thread, made of titanium alloy, with aluminum rw coating - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 4130 / AC Aviation series - Bolts, normal hex head, coarse tolerant thread, unshielded body, medium length thread, made of titanium alloy, with aluminum iv coated - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 4131 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded, medium-length thread, made of heat-resistant nickel-based alloy, with aluminum iv coating - Classification: 1250 mpa (at ambient temperature) / 425 ° c

TS EN 4132 Aviation series - Bolts, normal hex head, coarse tolerant unshielded body, short tooth, made of heat-resistant nickel alloy, with aluminum ell coating - Classification: 1250 mpa (at ambient temperature) / 425 ° c

TS EN 4133 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, long thread, made of titanium alloy, with aluminum ell coating - Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 4134 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, long thread, made of heat-resistant nickel-based alloy, with aluminum rw coating - Classification: 1250 mpa (at ambient temperature) / 425 ° c

TS EN 4135 Aviation series - Bolts, double hexagonal head, coarse tolerant thread unshielded, medium length thread, made of titanium alloy, anodized, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4136 Aviation series - Bolts, double hexagonal head, coarse tolerant thread, long thread, steel alloy, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4137 Aviation series - Bolts, double hexagonal head, coarse tolerant thread unshielded body, long thread, made of titanium alloy, anodized, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4161 Aviation series-Bolts, cylindrical head, edges off the housing axis, normal tolerances, coarse tolerance, long thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4161 / AC Aviation series-Bolts, cylindrical head, edges off the housing axis, normal tolerance with coarse thread, long thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4162 Aviation series-Bolts, 100 ° with countersunk head, loosened from the housing axis, rough tolerance normal body, medium length thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c

TS EN 4172 Aviation series - Latches, lockbolts, protruding head, sheartype, close tolerance, in titanium alloy T-P64001, anodized, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4175 Aerospace series - Rings, flange-printed - With locking latch, t-P99002 titanium, metric series

TS EN 4176 Aviation series - Lock bolts, 100 ° countersunk normal head or wide head, cut / bend resistant type, tight tolerant, made of titanium alloy ti-P64001, coated with anodized or painted aluminum - Titianium ti-P99002 made of stainless steel or aluminum alloy 2024 - Metric series - Technical specifications

TS EN 4302 Aviation series - Open gasket mounting tool, square

TS EN 4303 Aviation series - Handles, tubular, for screw-in head screws, made of corrosion-resistant steel, chemically passivated, with wall thickness 0,25 mm

TS EN 4304 Aviation series - Handles, tubular, for screw-in cutting screws, made of corrosion-resistant steel, chemically passivated (wall thickness 0,25 mm)

TS EN 4306 Aviation series - Handles, tubular, for screw-in head screws, made of corrosion-resistant steel, chemically passivated, with wall thickness 0,50 mm

TS EN 4307 Aviation series - Handles, tubular, for screw-in cutting screws, made of corrosion-resistant steel, chemically passivated (wall thickness 0,50 mm)

TS EN 4311 Aviation series - Nails, coarse tolerant, reduced body, with average length thread, made of heat and corrosion resistant steel, lubricated mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4312 Aviation series - Nails with coarse tolerance, reduced body, thread of average length, made of heat and corrosion resistant steel, colored aluminum coated - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4354 Aviation series - Hexagon wrench - Keys, free

TS EN 4355 Aviation series - Hexagonal wrenches - Screwdrivers, socket

TS EN 4356 Aviation series - Hexagon wrench - Wrenches, short

TS EN 4357 Aviation series - Hexagon wrench - Keys, handle

TS EN 4358 Aviation series - Hexagon wrench - Wrenches, two-point, 90 °

TS EN 4359 Aviation series - Hexagon wrench - Wrenches - Technical specifications

TS EN 4396 Aviation series - Shaft nuts, self-locking, made of heat-resistant steel fe-Pa92ht (a286), silver-plated

TS EN 4420 Aviation series - Clamps, spring tension - Made of alloy steel fe-Pa3903

TS EN 4425 Aviation series - Stamps, flight control rods made of corrosion-resistant steel invoice - Dimensions

TS EN 4458 Aviation series - Studs, mj screws, Ti-P64001 titanium alloy, mos2 coated, notched locking ring made of corrosion-resistant steel - Strength class: 1100 mpa (at ambient temperature) - Technical specifications

TS EN 4459 Aviation series - Studs, mj screws, Ti-P64001 titanium alloy, with notched locking ring made of corrosion-resistant steel - Design standard

TS EN 4460 Aviation series - Studs, mj screws, t-P64001 titanium alloy, corrosion-resistant steel with notched locking ring - Installation and removal

TS EN 4493 Aviation series - Studs, threaded, helical winding, self-locking, heat-resistant nickel-based alloy nı-Ph1801 (nı-P96ht, nimonik 90), manufactured silver coated

TS EN 4494 Aviation series - Eyelets in two-piece stainless steel

TS EN 4495 Aviation series - Bolts, normal hexagon head, tight tolerant normal body, short length thread, made of titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4496 / AC Aviation series - Screws, 100 ° countersunk normal head, pre-shaped cruciform printed, tight tolerant normal body, made of titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4496 Aviation series - Screws, 100 ° countersunk normal head, pre-shaped cruciform printed, tight tolerant normal body, made of titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 C

TS EN 4497 Aviation series - Screws, flat head, flat head, pre-shaped cruciform printed, tight tolerance normal body, short screw thread, made of titanium alloy, anodized, colored aluminum coating - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4498 Aviation series - Bolts, large hexagonal head, tight tolerance normal body, medium length thread, made of heat resistant nickel based alloy, chemically passivated, colored aluminum coated - Classification: 1550 mpa (at ambient temperature) / 315 ° c

TS EN 4499 Aviation series - Screws, 100 ° with countersunk head, cross-shaped, tight tolerant normal body, short thread, made of titanium alloy, anodized, coated with aluminum tinting - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4509 Aviation series - Screws, 100 ° countersunk normal head, pre-shaped cross-shaped, threaded up to the head, made of titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c

TS EN 4585 Aviation series - Clamps, spring tension - Technical specifications

TS EN 4590 Aviation series - Holders, made of spring-loaded sheet metal, with self-locking thin nut, made of corrosion-resistant steel, chemically passivated

TS EN 4619 Aviation series - ferrules, mj thread, self-locking, self-drilling with key - Assembly and disassembly

TS EN 4620 Aviation series - ferrules, mj thread, self-locking, self-drilling with key - Design standard

TS EN 4621 Aviation series - ferrules, mj thread, self-locking, self-drilling with key - Technical specifications

TS EN 4622 Aviation series - ferrules, mj gears, self-locking, with self-drilling key, heat-resistant steel fe-Pa2601 (a286), mos2 coated

TS EN 4623 Aviation series - ferrules, mj gears, self-locking, self-drilling key, heat-resistant nickel-based alloy nı-Ph2601 (inconel 718), silver plated

TS EN 4635 The bolts are made of nI-Ph100 (inconel 2601) in 718 ° with countersunk head, six log, short screw and temperature resistant steel. -Classification: 1270 mpa (at ambient temperature) / 650 ° c

TS EN 4636 Bolts are made of TL-P100 titanium alloy with countersunk head 64001 °, six-threaded, short-screwed, heat-resistant aluminum paint -Classification: 100 mpa (at ambient temperature) / 315 ° c

TS EN 4673-003: 2010 Aviation series - ferrules, unj gears, self-locking, self-drilling - Part 003: Technical specifications

TS EN 4673-006: 2010 Aviation series - ferrules, unj gears, self-locking, self-drilling with key - Part 004: Temperature-resistant steel fe-Pa2601 (a286), mos2 coated

TS ISO 5855-3 Aerospace series - Mj screws - Part 3: Boundary dimensions for fasteners - Used in fluid systems

TS EN 6069 Aerospace series - Rivets, 100 ° reduced head, coarse tolerance - Inch series

TS 6483-1 ISO 3353-1 Aviation series - Thread start and end - Part 1: Threaded external thread

TS 6483-2 ISO 3353-2 Aerospace series - Thread start and end - Internal thread

TS 7506 ISO 5855-2 Aviation series mj screws - Part 2: Limit dimensions for bolts and nuts

TS 8021 EN 2287 Aviation series bushings - Plain, corrosion-resistant steel, self-lubricating - Dimensions and loads

TS ISO 8279 Aviation - Nuts, hexagonal, of normal height, with normal flat surfaces, mj teeth, classification: 600 mpa (at ambient temperature) / 120 ° c, 600 mpa (at ambient temperature) / 235 ° c, 900 mpa (ambient) 425 ° c, 1100 mpa (at ambient temperature) / 235 ° c, 1100 mpa (at ambient temperature) / 315 ° c, 1100 mpa (at ambient temperature) / 650 ° c, 1210 mpa (at ambient temperature) / 730 ° c , 1250 mpa (at ambient temperature) / 235 ° c and 1550 mpa (at ambient temperature) / 600 ° c - Dimensions

TS ISO 8642 Aviation - Self-locking nuts with a maximum operating temperature greater than 425 ° c - Test methods

TS ISO 8788 Aviation - Fasteners - Shape and position tolerances for nuts

TS 8937 EN 2288 Aviation series - Flanged bushings - Corrosion-resistant self-lubricating steel - Dimensions and loads

TS EN 3820 Aviation series - Metric bolts, with normal sub-corners, normal body with coarse tolerance, short thread, made of taitanium alloy, anodized, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c