Aircraft and Space Vehicle Engineering, Materials Standards for Aircraft and Space Vehicle Construction

All of the standards for Materials for Aircraft and Space Vehicle Construction are as follows. For years, our company continues to work without sacrificing quality of all the following items related to testing, inspection and certification services to you.

TS EN 2374 Aerospace series-Glass fiber reinforced molding and sandwich-shaped composites-Manufacture of test plates

TS EN 2004-1 Test methods for aerospace aluminum and aluminum alloy products - Part 1: Determination of electrical conductivity of machined aluminum alloys

TS EN 2032-2 Aerospace-Metal materials; Chapter 2: Coding of metallic properties on delivery

TS EN 2070-3 Aerospace-Aluminum and aluminum alloys machined products-Technical specifications; Section 3: Rod and cross section

TS EN 2070-4 Aviation-Aluminum and aluminum alloys processed products-Technical specifications; Section 4: Tubes for body

TS EN 2259 Aviation series - Silicone rubber (VMQ) - 50 IRHD hardness

TS EN 2260 Aviation series-Silicone rubber (VMQ) -Hardness 60 armor

TS EN 2262 Aviation series-High tear strength silicone rubber (vmq / pvmq) - 50 armor hardness

TS EN 2310 Aerospace series - Test methods for determination of flame resistance of non-metallic materials

TS EN 2545-2 Aerospace series - Re-melting drafts and castings made of titanium and titanium alloy - Technical specifications - Part 2: Re-melting drafts

TS EN 2545-3 Aerospace series - Titanium and titanium alloy remelting blocks and castings - Technical specifications - Part 3: Pre-production and production castings

TS EN 2329 Aerospace series - Pre-impregnated glass fiber textiles - Test method for mass determination per unit area

TS EN 2330 Aerospace series - Pre-impregnated glass fiber textile materials - Test method for determination of volatile content

TS EN 2103-2 Aerospace series - Re-melting drafts and castings made of steel, nickel-based and cobalt-based alloys - Technical specifications - Part 2: Re-melting drafts

TS EN 2103-3 Aerospace series-Steel, nickel-based and cobalt-based alloy remelting drafts and castings-Technical specifications-Part 3: Pre-production and production castings

TS EN 2284 Aviation series-Anodic oxidation of aluminum and formable aluminum alloys with sulfuric acid

TS EN 2562 Aviation- Carbon fiber reinforced plastics-One-way laminates- (sheet) - Flexural parallel test in fiber direction

TS EN 2560 Aviation - Pre-impregnated carbon fiber - Determination of resin flow

TS EN 2564 Aviation - Carbon fiber laminated sheets - Determination of fiber, resin and void content

TS EN 2597 Aviation - Plastics - Carbon fiber reinforced - One way laminated sheets - Tensile test perpendicular to the fiber direction

TS EN 2746 Aviation series - Glass fiber reinforced plastics - Bending test - Three point bending method

TS EN 2747 Aerospace series - Glass fiber reinforced plastics - Tensile test

TS EN 3952 Aviation series - Silver-based alloy ag-B10001 (agcu28) - Filler metal for brazing - Wire

TS EN 2374 Aerospace series - Glass fiber reinforced moldings and sandwich-shaped composites - Manufacture of test plates

tst EN 2746 Aerospace series - Glass fiber reinforced plastics - Bending test - Three point bending method

tst EN 2747 Aviation series - Glass fiber reinforced plastics - Tensile test

TS EN 3882 Aviation series - Temperature resistant alloy nI-Wh1801 (nicr20co18ti3al2) - Filler metal for welding

TS EN 3883 Aviation series - Temperature resistant alloy nI-Wh2301 (nicr22fe19mo9co2) - Filler metal for welding

TS EN 3884 Aviation series - Heat resistant alloy nI-Wh2601 (nicr19nb5mo3ti) - Welding filler metal

TS EN 3886 Aviation series - Temperature resistant alloy nI-Wh1303 (nico20cr20mo5ti2i) - Filler metal for welding

TS EN 3927 Aerospace series - Nickel-based alloy ni-B40001 (nisi5b3) - Filler metal for brazing - Powder or pastes

TS EN 3930 Aviation series - Nickel base alloy nI-B31001 (nicr19si10) - Filler metal for brazing - Powder or paste

TS EN 3932 Aerospace series - Nickel-based alloy nı-B13001 (nip11) filler metal for brazing - Amorphous foil

TS EN 3933 Aerospace series - Nickel-based alloy nı-B13001 (nip11) - Filler metal for brazing - Powder or paste

TS EN 3934 Aviation series - Nickel-based alloy nI-B21001 (nicr15b4) filler metal for brazing - Amorphous foil

TS EN 3936 Aviation series - Nickel-based alloy nI-B21001 (nicr15b4) filler metal for brazing - Powder or pastes

TS EN 3937 Aviation series - Nickel-based alloy nI-B44101 (niw12cr10si4fe3b3) - Filler metal for brazing; Salt or cake

TS EN 3957 Aviation series - Silver-based alloy ag-B14001 (agcu42ni2) - Filler metal powder or paste for brazing

TS EN 3959 Aerospace series - Cobalt based alloy co-B41601 (cocr19ni17si8w4) - Filler metal for brazing - Powder or paste

TS EN 3962 Aviation series - Gold-based alloy au-B40001- Filler metal for brazing- Wire

TS EN 3963 Aviation series - Copper cu - Bu9001 - Filler metal for brazing - Roll foil

TS EN 3964 Aviation series - Copper cu - Bu9001 - Filler metal for brazing - Wire

TS EN 3965 Aerospace series - Titanium alloy ti-B17001- Filler metal for brazing- Roll foil

TS EN 4059 Aviation series - Fillers and wires for welding in steel - diameter 0,5 mm? D ? 5,0 mm - Dimensions

TS EN 4342 Aerospace series - Titanium tI - W99001 - Filler metal for welding - Wire and rod

TS EN 4344 Aviation series - Steel fe-Wm1002 (x13cr13) - Filler metal for welding- Wire and rod

TS EN 2083 Aviation series - Copper and copper alloy conductors for electrical cables - Product standard

TS EN 2599 Aviation series - Strips of aluminum and aluminum alloys - Thickness 0, 25 mm to 3, 2 mm

TS EN 2810 Aviation series - Nut shape reduced, with normal key mouth, made of temperature resistant steel, posivated - Classification 900 mpa (at ambient temperature) / 650 ° c

TS EN 3887 Aviation series - Heat resistant alloy co-Wh4101 (cocr20w15ni) - Filler metal for welding

TS EN 3888 Aviation series - Temperature resistant alloy co-Wh1402 (cocr22ni22w15) - Filler metal for welding

TS EN 3892 Aviation series - Titanium alloy ti-W64001 -Floor metal for welding

TS EN 3894 Aviation series - Temperature resistant alloy ni-Wd3201 (nimo25fe6cr5) - Filler metal for welding

TS EN 3921 Aviation series - Nickel-based alloy nI-B41203 (nicr7si5b3) - Filler metal for brazing - Amorphous foil

TS EN 3923 Aviation series - Nickel-based alloy nI-B41203 (nicr7si5b3fe3) - Filler metal for brazing - Powder or paste

TS EN 3925 Aviation series - Nickel-based alloy nı-B40001 (nisi5b3) filler metal for brazing - Amorphous foil

TS EN 3926 Aviation series - Nickel based alloy nı-B40001 (nisi5b3) boron foil

TS EN 3943 Aviation series - Nickel-based alloy nI-B41204 (nicr13fe4si4b3) - Filler metal for brazing - Powder or paste

TS EN 3952 Aviation series - Silver-based alloy ag-B10001 (agcu28) - Filler metal for brazing - Wire

TS EN 3953 Aviation series - Silver-based alloy ag-B12401 (agcu40zn5ni) - Filler metal for brazing - Wire

TS EN 3954 Aerospace series - Silver-based alloy ag-B12401 (agcu40zn5ni) - Filler metal for brazing - Powder or paste

TS EN 3955 Aviation series - Silver-based alloy ag-B12401 (agcu40zn5ni) - Filler metal for brazing - Roll foil

TS EN 3956 Aviation series - Silver-based alloy ag-B14001 (agcu42ni2) - Filler metal for brazing - Wire

TS EN 4085 Aviation series - Nickel-based alloy nı-B40002 (nisi4b2) - Filler metal for brazing - Amorphous foil

TS EN 4250 Aviation series - Nickel-based alloy nI-B41001 (nicr19si7b) - Filler metal for brazing - Amorphous foil

TS EN 4325 Aviation series - Temperature resistant alloy nI-Wh1302 (nicr20co13mo4ti3al) - Filler metal for welding - Wire and rod

TS EN 4326 Aviation series- Temperature resistant alloy co-Wh4102 (cocr28w20ni5v1) - Filler metal for welding- Wire and rod

TS EN 4327 Aviation series - Temperature resistant alloy co-Wh1401 (cocr26ni11w8) - Filler metal for welding- Wire and rod

TS EN 4329 Aviation series - Temperature resistant alloy nI-Wh0001 (nicr20) - Filler metal for welding - Wire and rod

TS EN 4337 Aviation series - Temperature resistant alloy nI-Wh8901 (nicr16ti3mn2) - Filler metal for welding- Wire and rod

TS EN 4338 Aviation series - Temperature resistant alloy nI-Wh3902 (nicr25mo10c) - Filler metal for welding- Wire and rod

TS EN 4339 Aerospace series- Temperature resistant alloy co-Wh4001 (cocr29w9) - Filler metal for welding- Wire and rod

TS EN 4341 Aviation series - Aluminum alloy al-W46431 - Filler metal for welding - Wire and rod

TS EN 2044 Aerospace series - Round bars of aluminum and aluminum alloy - Tolerance class h11,4 mm d 63 mm, dimensions

TS EN 3889 Aviation series - Fe-Wm 3801 (x5 crnicu17-4) steel - Filler metal for welding

TS EN 3890 Aviation series -Fe-Wm1502 (x11crnimovn12-3) -Filling metal for welding

TS EN 3893 Aviation series-Titanium alloy t-W 19001-Filler metal for welding

TS EN 3896 Aviation series-Steel fe-Wm 1501 (x13-12-3-2-2-XNUMX) -Filling metal for welding

TS EN 3897 Aviation series-Fe-Wa4801 (x6crnimnnb18-10) filler metal for welding

TS EN 4000 Aerospace series - Metallic materials - Rules for the draft and in force of dimension standards for metallic semi-finished products

TS EN 2131 Aviation series-Aluminum alloy sheets-Thickness 6 mm-160 mm-Dimensions

TS EN 2134 Aviation series-Round rods made of extruded aluminum and aluminum alloys-Diameter 10 mm-220 mm, dimensions

TS EN 2338 Aviation series - Sheet metal, hot-rolled, of titanium and titanium alloy - Thickness 0,8 mm-Dimensions

TS EN 2339 Aviation series-Plates of cold-rolled titanium and titanium alloys-Thickness 0,2 mm-6 mm-Dimensions

TS EN 2344 Aviation series-Round bars, machined in heat-resistant alloys-Diameter 10 mm d 180 mm: Dimensions

TS EN 2617 Aviation series-Titanium and titanium alloy sheets-Thickness 6 mm to 1000 mm-Dimensions

TS EN 4058 Aviation series-Filler bars and fillers for welding titanium and titanium alloys-Diameter 0,5 mm-Dimensions

TS EN 3506 Aviation series - Hot-rolled sheet and plates made of heat-resistant alloy

TS EN 4104 Aviation series nickel-based alloy nı-B40002 solder for filler metal - Powder or paste

TS EN 4324 Aerospace series-Aluminum alloy al-W42201-Filler metal for welding, rod

TS EN 4328 Aviation series - Steel fe-Wm1601 (x18crwni13-3-2) - Filler metal for welding: Wire and rod

TS EN 4330 Aviation series - Steel fe-Wa 4802 (w8crnimn 27-22-2) -Fill metal for welding: Wire and rod

TS EN 4331 Aviation series-Steel fe-Wl 1804 (25 crmnmo 4-2-2) filler metal for welding-Wire and rod

TS EN 4332 Aerospace series - Steel fe-Wl1805 (8crmnmo12-4-9) - Filler metal for welding; Wire and rod

TS EN 4333 Aviation series - Steel fe-Wa 4902 (x5crnicomowmn 21-20-20-3-3-2) -Fill metal for welding-Wire and rod

TS EN 4335 Aviation series - Steel fe-Wa2602 (x4nicrtimov26-15) - Filler metal for welding, wire and rod

TS EN 4336 Aviation series-Steel fe-Wa 3801 (xNUMX-4-20-10-2) - Full metal, wire and rod for welding

TS EN 4343 Aviation series - Steel fe-Wm 1001 (x13cr12) - Welding filler metal - Wire and rod

TS EN 14089 Space products assurance - Control of materials with limited shelf life

TS EN 14090 Space products assurance - Ignition test for the shielding of space materials

TS EN 2344 Aviation series - Round bars, machined from heat-resistant alloy - Diameter 10 mm? D ? 180 mm - Dimensions

TS EN 2078 Aviation series - Metallic materials - Manufacturing plan, inspection plan, inspection and test report - Description, general principles, preparation and approval

TS EN 2088 Aviation series - Aluminum alloy al-P2014a - T4 or t42 - Coated sheet and strip - 0 mm <a <4 mm

TS EN 2090 Aviation series - Aluminum alloy al-P2024 - T3 - Coated sheet and strip - 0 mm <a <3 mm

TS EN 2422 Aviation series - Aluminum alloy al-P2124a - T351 - Sheet - Thickness 25 mm to 120 mm

TS EN 2703 Aviation - Aluminum alloy al-P2024 - T4 or t42 - Coated sheet and strip - 0 <a <3 mm

TS EN 2731 Aviation series - Magnesium alloy mg-C46001 - T6 - Sand casting

TS EN 2732 Aviation series - Magnesium alloy mg-C46001 - T6 - Cold die casting

TS EN 2802 Aviation series - Aluminum alloy al-P7475 - T761 - Sheet and strip - 0 mm <a <6 mm

TS EN 3341 Aviation series - Aluminum alloy al-P6061 - T4 or t42 - Sheet and strips - 0 mm <a <4 mm

TS EN 3474 Aviation series - Aluminum alloy al-P2024 - T81 - Sheet and strip - 0,25 mm <a <6 mm

TS EN 4212 Aviation series - Aluminum alloy al-P5086 - H111 - Sheet - 6 mm to 80 mm

TS EN 4213 Aviation series - Aluminum alloy al-P6061 - T651 - Sheet - 6 mm to 80 mm

TS EN 4247 Aviation series - Aluminum alloy al-P2024 - T42 - Sheet - 6 mm to 140 mm

TS EN 4286 Aviation series - Aluminum alloy AL-P8090 - T89 - Forged on the die - A <125 mm

TS EN 2089 Aviation-Aluminum alloy al-P2014a-T6 or t62, plate and strip, 0,4 mm to 6 mm

TS EN 2395 Aviation series - Aluminum alloy al-P2014a - T4 or t42- Sheet and strip - 0 mm <a <4 mm

TS EN 2693 Aviation series; Al-P5086-H111 aluminum alloy-Sheet and strip, 0,3 mm

TS EN 2694 Aviation series; Al-P6061-T6 aluminum alloy or t62; Sheet or strip 0.4mm

TS EN 2695 Aviation; Series al-P6081-T6 aluminum alloy sheet and strip 0,3mm <6mm

TS EN 2696 Aviation; Al-P7075-T6 or t62 aluminum alloy; Sheet and strip 0,4 mm

TS EN 2243-5 Aviation series-Structural adhesives-Test methods-Part 5: Aging tests

TS EN 2702 Aviation series - Aluminum alloy al-P6061-T6 or t62 -Mold and extruded rod and profile - A or d? 200 mm

TS EN 3342 Aviation series - Aluminum alloy al-P6061 - T4 or t42 - Extruded or rolled bar and profile - A or d <150 mm

TS EN 4615 Aviation series - Magnesium alloy mg-C18002 - T4 - Sand casting

TS EN 4616 Aviation series - Magnesium alloy mg-C18002 - T4 - Cold die casting

TS EN 2090 Aviation series - Aluminum alloy, al - P2024 - T3 - coated sheet and strip - 0,3 mm? A? 6 mm

TS EN 2702 Aviation series - Aluminum alloy, al - P6061 - T6 or t62 - Extruded or extruded rod and profile - A or d? 200 mm

TS EN 2703 Aviation series - Aluminum alloy, al - P2024 - T4 or t42 - Coated sheet and strip - 0,3 mm? A? 6 mm

TS EN 3341 Aviation series - Aluminum alloy, al - P6061 - T4 or t42 - sheet and strip - 0,4 mm? A? 6 mm

TS EN 3342 Aviation series - Aluminum alloy, al - P6061 - T4 or t42 - Manufactured by extrusion or extrusion - Square or round section rod - A or d? 150 mm

TS EN 3474 Aviation series - Aluminum alloy, al - P2024 - T81 - Sheet and strip - 0,25 mm? A? 6 mm

TS EN 2088 Aviation series - Aluminum alloy, al - P2014a - T4 or t42 - Coated sheet and strip - 0,4 mm? A? 6 mm

TS EN 2089 Aviation series - Aluminum alloy, al - P2014a - T6 or t62 - sheet and strip - 0,4 mm? A? 6 mm

TS EN 2821 Aerospace series - Steel fe-Pm18021 (x5crnicu15-5) - Re-melted consumable electrodes - Chemically treated and precipitated - Rod to remove sawdust - Diameter or thickness of 200 mm or greater - Rm 1310 mpa or bigger

TS EN 3490 Aviation series - Steel fe-Pm3901 (x15crni17-3) - Air melted - Hardened and tempered - Rod for chip removal - De? 200 mm - 900 MPa? Rm? 1 100 is MPa

TS EN 3638 Aerospace series - Heat-resistant alloy FE-PA2601 (X6NiCrTiMoV26-15) - Re-melted consumable electrode - Chemical and precipitated - Plate, strip and plate - 0,5 mm? a? 10 mm

TS EN 3671 Aviation series - Heat-resistant alloy nI-Ph3601 (nicr22mo9nb) - Untreated - Forging machine - Thickness or diameter greater than 250 mm

TS EN 3677 Aerospace series - Steel fe-Pm3801 (x5crnicu17-4) - Chemical and precipitated - Melted in air - Forged materials - a or D? 200 mm - Rm? 1 310 MPa

TS EN 3678 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Melted in air - Chemical and precipitated - Forged materials - Thickness or diameter equal to or greater than 200 mm and Rm equal to or greater than 930 MPa one

TS EN 3684 Aviation series - Test methods - Titanium alloy products - Processed - Determination of ß Transition (transition from hexagonal tight package to cubic structure) temperature - Metallographic method

TS EN 2467 Aviation series - FE-PA3901 Steel (X2CrNi18-9) - Air-melted - Softened - Sheets, sheets and strip - 0,4 mm? a? 20 mm - 520 MPa? Rm? 670 MPa

TS EN 2573 Aviation series - Steel fe-Pa3901 (x6crniti18-10) - Soft - Tensile stress -Rm? 780 is MPa - Diameter of 0,25 mm? Also ? Wires with 3 mm

TS EN 3162 Aviation series - Steel fe-Pm3801 (x5crnicu17-4) - Air-melted, chemically treated and precipitated sheet and strip - a? 6 mm, Rm? 930 is MPa

TS EN 3365 Aviation series - Steel fe-Pm3901 (x15CrNi17-3) - Reinforced, softened, forged block, thickness or diameter a or D? 300 is mm

TS EN 3488 Aviation series - Steel fe-Pa3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - Thickness a? 6 mm - 500 MPa? Rm? 700 MPa

TS EN 3999 Aviation series - Aluminum alloy al-P2024-T351 - Sheet and strip with improved chemical resistance, thickness 1,6 mm? a? 6 is mm

TS EN 4002 Aviation series - Aluminum alloy al-P2219-T81 - Sheet and strip, thickness 0,5 mm? a? 6 is mm

TS EN 4098 Aviation series - Steel fe-Pl1507 (40CrMoV12) - Re-melted, hardened and tempered, forging - Diameter De? 50 mm, 1250 MPa? Rm? 1400 MPa

TS EN 4216 Aviation series - Steel fe-Cm3801 (gx5crnicunb16-4) - Homogenized, treated with chemical solution and hardened with precipitation, precision casting - Diameter <50 mm and rm <900 mpa

TS EN 4314 Aerospace series - Heat-resistant alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non-heat treated, forged draft a or D? 250 is mm

TS EN 4315 Aviation series - Heat-resistant alloy fe-Pa2601 (x6nicrtimov26-15) - Chemical solution treated and precipitated, rod and plate D? 100 mm and Rm? 900 is mpa

TS EN 4318 Aerospace series - Heat-resistant alloy fe-Pa2601 (x6nicrtimov26-15) - Chemical solution treated and precipitated, rod and plate are also? 100 mm and rm? 960 mpa

TS EN 4346 Aviation series - Çelikfe-Pm1505 (x1crnimoalti12-9-2) - Melted with vacuum induction and remelted using consumable electrode, softened, thickness or diameter a or d <300 mm

TS EN 4461 Aviation series - Steel fe-Pm1506 (x1crnimoalti13-8-2) - Melted by vacuum induction and remelted using consumable electrode - Treated with chemical solution and treated with precipitation - Rods - Thickness or diameter a or d < 150 mm - Rm <1200 MPa

TS EN 4465 Aviation series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Melted with vacuum induction and remelted using consumable electrodes - Treated with chemical solution and treated with precipitation - Forgings - Thickness or diameter a or D < 150 mm - Rm <1300 MPa

TS EN 4467 Aviation series - Steel fe-Pm1505 (x1crnimoalti12-9-2) - Melted with vacuum induction and remelted using consumable electrode - Treated with chemical solution and treated with precipitation - Rods - Thickness or diameter a or d < 150 mm - Rm <1200 mpa

TS EN 4468 Aviation series - Steel fe-Pm1505 (X1CrNiMoAlTi12-9-2) - Melted by vacuum induction and remelted using consumable electrode - Treated with chemical solution and treated with precipitation - Rods - Thickness or diameter a or D < 150 mm - Rm <1300 MPa

TS EN 4470 Aviation series - Steel fe-Pm1505 (x1crnimoalti12-9-2) - Melted by vacuum induction and re-melted using consumable electrot - Treated with chemical solution and treated with precipitate - Tattoos - Thickness or diameter a or D? 150 mm - Rm? 1 200 is MPa

TS EN 4471 Aerospace series - Steel fe-Pm1505 (X1CrNiMoAlTi12-9-2) - Melted by vacuum induction and re-melted using consumable electrot - Treated with chemical solution and treated with precipitate - Tattoos - Thickness or diameter a or D? 150 mm - Rm? 1 300 is MPa

TS EN 2465 Aviation series -Steel fe-Pa3901 (x2crni18-9) -Soft - With tensile stress 450 mpa <rm <680 mpa - Diameter 0,4 mm <d <100 mm

TS EN 4379 Aviation series - Heat resistant alloy ni-Ph3601 (nicr22mo9nb) - Solution treated, forged d <200 mm

TS EN 2460 Aviation series - Steel fe-Pm1901 (x12crni13) - 600 MPa? Rm? 800 MPa - Bars - De? 70 mm

TS EN 2461 Aviation series - Steel fe-Pm1901 (x12crni13) - 600 mpa <rm <800 mpa - Forgings - De <70 mm

TS EN 2466 Aviation series - Steel fe-Pa3901 (x2crni19-11) - Softened - Forging - De? 100 mm

TS EN 2818 Aviation series - Steel fe-Pm1802 (x5crnicu15-5) - Re-melted using consumable electrodes - Treated with chemical solution and treated with precipitate - Forging - A or D? 200 mm - Rm? 1 070 MPa

TS EN 3330 Aviation series - Steel fe-Pl1503 (35crmo4) - Annealed - Rod and wire - De? 40 mm - for the largest torque nuts

TS EN 4528 Aviation series - Steel fe-Pa3903 (x10crni18-8) - Cold rolled - Strips for springs - A <3 mm - 1250 mpa <rm <1640 mpa

TS EN 4642 Aviation series - Steel fe-Pm 3504 (x4CrNiMo16-5-1) - Melted using air - Hardened and tempered - Sheet and plate - 0,6 mm? a? 50 mm - 900 mpa? Rm? 1050 mpa

TS EN 3987 Aerospace series-Test methods for metallic materials-Determination of force controlled high cycle fatigue properties of constant amplitude

TS EN 3459 Aviation series-Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) -Treated with chemical solution and aged - Sheet 6 mm <a? 50 mm

TS EN 2954-001 Aerospace series - Macro structure of processed titanium alloy products - Part 001: General specifications

TS EN 3529 Aerospace series - Steel fe-Pm2701 (x2nicomo18-8-5) - Melted in vacuum and re-melted with vacuum arc- Forged with chemical solution and precipitate- A or d? 150 mm - 750 mpa? rm? 2000 mpa

TS EN 3719 Aviation series - Aluminum or aluminum alloy conductors for electrical cables - Product standard

TS EN 4700-007 Aerospace series - Steel and heat resistant alloys - Formed products - Technical specifications - Part 004: Wire

TS EN 4700-004 Aerospace series - Steel and heat resistant alloys - Formed products - Technical specifications - Part 007: Re-melted draft

TS EN 4657 Aviation series - Steel fe-Pm1507 (x1crnimoalti12-11-2) - Melted in vacuum and remelted using consumable electrode - Chemically treated and precipitation - Rods - A or <200 mm - Rm> 1650 mpa

TS EN 4700-002: 2010 Aerospace series - Steel and heat resistant alloys - Formed products - Technical specifications - Part 002: Rod and profile

TS EN 4655 Aviation series - Steel fe-Pm1506 (x1crnimoalti12-10-2) - Melted in vacuum and re-melted using consumable eletrot- Chemically treated and precipitated - Rods - A or d = 200 mm - Rm = 1 400 m

TS EN 4700-001 Aerospace series - Steel and heat resistant alloys - Formed products - Technical specifications - Part 001: Sheet, sheet and strip

TS EN 3873 Aviation series - Tests for metallic materials - Determination of fatigue crack growth rate using Corner-Cracked (cc) test pieces

TS EN 4656 Aerospace series - Steel fe-Pm1507 (x1crnimoalti12-11-2) -Melted in vacuum and re-melted using a consumable electrode- Chemical and precipitated rods - A or d = 200 mm - Rm = 1520 mpa

TS EN 4659 Aerospace series - Steel fe-Pm1507 (x1crnimoalti12-11-2) -Melted in vacuum and re-melted using consumable eletrot- Chemical and precipitated process- Forging - a or D = 200 mm - Rm = 1650 mpa

TS EN 4800-006 Aerospace series - Titanium and titanium alloys - Technical specifications - Part 006: Pre-production and production of forging

TS EN 4800-001 Aerospace series - Titanium and titanium alloys - Technical specifications - Part 001: Sheet, sheet and strip

TS EN 4800-005 Aerospace series - Titanium and titanium alloys - Technical specifications - Part 005: Forging draft

TS EN 4672 Aviation series - Steel fe-Pm1504 (x1crnimoalti12-10-2) - Melted by vacuum induction and re-melted using consumable electrot- Softened-Forged draft - A or d? 300 mm

TS EN 4683 Aviation series-Steel fe-Wm 3504 (x4crnimo16-5-1) -High-softened -Filling metal for welding-Wire and rod

TS EN 2824: 2011 (EN) Aerospace series- Combustion behavior of non-metallic materials under the influence of heat and flame emitting materials Determination of smoke density and gas components in materials smoke-Test equipment and environment

TS EN 3310 Aviation series-Titanium alloy tl-P64001 (ti-6al-4v) - Heat treated - Forged stock, annealed for tattoos - De? 360 mm

TS EN 2252 Aviation series - Steel fe-PL1505 (15crmov6) - 1 080 mpa? 1250 mpa - Pounded - De? 100 mm

TS EN 3120 Aviation series - Titanium alloy Ti-P64003 - Cold relieved worked and stress - Seamless pipe for pressure systems - 4 mm? d? 51 mm - 690 mpa? rm? 1 030 mpa

TS EN 3312 Aviation series - Titanium alloy Ti-6Al-4V - Annealed - Forgings? 150 mm

TS EN 3844-1 Aerospace series - Flammability of non-metallic materials - Part 1: Small combustion test, determination of vertical and vertical flame spread resistance

TS EN 3844-2 Aerospace series - Flammability of non-metallic materials - Part 2: Horizontal, small combustion test, Determination of horizontal flame spread resistance

TS EN 3844-3 Aerospace series - Flammability of non-metallic materials - Part 3: Small combustion test, 45 ° - Determination of flame and fire spread resistance and flame permeability of material

TS EN 2835 Aviation series - Chloroprene rubber (cr) - Heat resistance - Hardness 40 armor

TS 91 Glues used for bonding Animal-Wood material

TS EN 3553 Aviation series - Aluminum alloy AL-P2618A - T6511 - Extruded bar and section - one or D? 160 mm

TS EN 3553 Aviation series - Aluminum alloy, AL - P2618A - T6511 - Rolled bar and sheet - a or D? 160 mm

TS EN 3351 Aviation series - Titanium alloy ti-4al-4mo-2sn - Solution treated and aged - Forgings - D e <= 150 mm

TS EN 4268 Aviation series - Metallic materials - Heat treatment plants - General rules

TS EN 4500-001 Aerospace series - Metallic materials - Rules for the preparation and presentation of material standards - Part 001: General rules

TS EN 4500-003 Aerospace series - Metallic materials - Rules for the preparation and presentation of material standards - Part 003: Particular requirements for heat-resistant alloys

TS EN 4500-004 Aerospace series - Metallic materials - Rules for the preparation and presentation of material standards - Part 004: Particular requirements for titanium and titanium alloys

TS EN 4500-005 Aerospace series - Metallic materials - Rules for the preparation and presentation of material standards - Part 005: Particular requirements for steels

TS EN 2837 Aviation series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 armor

TS EN 3355 Aviation series - Titanium alloy ti-P64001 (ti-6al-4v) - Annealed - Extrusion profile - De? 150 mm - 900 mpa? rm? 1 160 mpa

TS EN 4050-1 Aerospace series - Test method for metallic materials - Ultrasonic inspection of plates, forged stock and forging bars, - Part 1: General rules

TS EN 4050-2 Aerospace series - Test method for metallic materials - Ultrasonic inspection of plates, forged stock and forging bars, - Part 2: Performance test

TS EN 4050-3 Aerospace series - Test method for metallic materials - Ultrasonic inspection of plates, forging stock and forging bars, - Part 3: Reference blocks

TS EN 4632-004 Aerospace series - Welded and brazed assemblies for aeronautical structures - Weldability and solderability of materials - Part 004: homogeneous assembly of welded and brazed steel alloy

TS EN 3464 Aviation series-Titanium alloy tı-P64001 (ti-6al-4v) -Annished-Plate-6 mm <a? 100 mm

TS EN 4050-4 Aerospace series - Test method for metallic materials - Ultrasonic inspection of plates, forging stock and forging bars, - Part 4: Acceptance criteria

TS EN 3354 Aviation series - Titanium alloy Ti-6Al-4V - Annealed -? 6 mm sheet for superplastic forming

TS EN 3528 Aviation series - Steel X2NiCoMo18-8-5 (1,6359) - Melted vacuum induction melted and vacuum arc - Solution treatment and precipitation treatment - Bar - One or D? 150 mm - 1 750 MPa? Rm? 2 000 MPa

TS EN 3697 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD

TS EN 3813 Aviation series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - forged fittings Bar and wire - De? 50 mm

TS EN 3861 Aviation series - Non-metal materials - Glass transparent - Material standard - Thermal tempered soda lime float glass

TS EN 3862 Aviation series - Non-metal materials - Glass transparent - Material standard - Chemically tempered soda lime float glass

TS EN 3863 Aviation series - Non-metal materials - Glass transparent - Test methods - flatness determination

TS EN 3866 Aerospace series - Non-metallic materials - Structural adhesive systems - adhesive Paste - Technical specifications…

TS EN 4106 Aerospace series - Non-metallic materials - Structural adhesive systems - adhesive Paste - Technical specifications

TS EN 4491 Aviation series - Non-metallic materials - Anaerobic polymerizable compounds - Screw - Torque force 16 Nm

TS EN 4492 Aviation series - Non-metallic materials - Anaerobic polymerizable compounds - Screw - Torque force 19 Nm

TS EN 3456 Aviation series-Titanium alloy tI-P64001 (ti-6al-4v) -Trained-Hot rolled sheet and strip -A? 6 mm

TS EN 4526 Aviation series - Metallic materials - Test methods - Sharp edge class tensile test for sheet and strip

TS EN 2838 Aviation series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD

TS EN 2839 Aviation series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD

TS EN 2840 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD

TS EN 2841 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD

TS EN 2842 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD

TS EN 2843 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD

TS EN 2844 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD

TS 2845 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Resistant to fuel and synthetic oil - Hardness 50 IRHD

TS EN 2846 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Resistant to fuel and synthetic oil - Hardness 60 IRHD

TS EN 2847 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Resistant to fuel and synthetic oil - Hardness 70 IRHD

TS EN 2848 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Resistant to fuel and synthetic oil - Hardness 80 IRHD

TS EN 2849 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Resistant to fuel and synthetic oil - Hardness 90 IRHD

TS EN 3102 Aviation series - Insulation - Test methods - Determination of low temperature flexibility

TS EN 3698 Aviation series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD

TS EN 4628 Aviation series - Steel fe-Pm 3504 (x4crnimo16-5-1) - Air melted - Hardened and tempered - Rod - De <150 mm - 1100 mpa <rm <1300 mpa

TS EN 4629 Aviation series - Steel fe-Pm 3504 (x4crnimo16-5-1) - Air melted - Hardened and tempered - Forged block - De <300 mm

TS EN 4631 Aviation series - Steel fe-Pm 3504 (x4crnimo16-5-1) - Air melted - Hardened and tempered - Rod - De <200 mm - 900 mpa <rm <1050 mpa

TS EN 4632-006 Aerospace series - Welded and brazed assemblies for aeronautical structures - Weldability and solderability of materials - Part 006: Homogeneous assemblies for titanium alloys

TS EN 4503: 2013 Space and Aerospace series - Non-metallic materials - Textile - Test method - Determination of water soluble chloride and sulfate of aqueous extract

TS EN 4263: 2013 Space and Aerospace series - Heat resistant FE alloy - PA 4901 (X12CrNiCoMoW21-20) - Forged malzeme Forged material veya a or D? 200 mm – 690 MPa? Rm? 960MPa

TS EN 4262: 2013 Space and Aerospace series - Heat-resistant FE alloy - PA 4901 (X12CrNiCoMoW21-20) olarakForging – Forged material –a or D? 200 mm – 690 MPa? Rm? 880 MPa

TS EN 2043: 2013 Aerospace series - Metal materials - General rules for semi-finished products (other than forging and casting)

TS EN 4505: 2013 Space and Aerospace series - Non-metal materials - Textile - Test method - Determination of dimensional stability

TS EN 4507: 2013 Space and Aerospace series - Non-metallic materials - Textile - Test method - Determination of water extractable material

TS EN 3864: 2013 Aviation series - Fasteners, electrical, circular, wedge connection, with continuous operating temperature 175 ° c or 200 ° c - Part 004: Connection with housing, clamping nut - Product standard

TS EN 3939 Aerospace series - Nickel-based alloy nI-B46001 (nico20si5b3) - Filler metal for brazing - Powder or paste

TS EN 2030 Aviation series - Steel X105CrMo17 (1.3544) - Hardened and annealed - Busbars - De? 150 mm

TS EN 2565 Aviation series - Preparation of carbon fiber reinforced resin sheets for experimental purposes

TS EN 2833-005 Aerospace series - Heat-cured, pre-impregnated glass fiber - Technical specifications - Part 005: Pre-impregnated glass fabric with phenolic resin

TS EN 3783 Aerospace series - Fiber composite materials - Normalization of fiber-based mechanical properties

TS EN 4504 Aviation series - Non-metallic materials, woven fabrics - Test method - Determination of elasticity of narrow fabrics

TS EN 3983 Aviation series - Aluminum alloy AL-P7050- - T7651 - Plate - 6 mm <a? 160 mm

TS EN 4720: 2014 Air-Space series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electric remelting (ESR) - Hardened and tempered - Bar - De? 200 mm - 1 150 MPa? Rm? 1 300 MPa

TS EN 4721: 2014 Air-Space series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electric remelting (ESR) - Hardened and tempered - Bar - De? 200 mm - 900 MPa? Rm? 1 050 MPa

TS EN 16602-70-21: 2014 Space product assurance-Examination of space materials with flammability test

TS EN 16602-70-22: 2014 Space product assurance - Inspection of materials with limited shelf life

TS EN 2278: 2014 Aviation Series-Space series-Steel X12CrNiMoV12-3 (1.4933) - 900 MPa? Rm? 1 100 MPa - Bars - De? 150 mm

TS EN 2512: 2014 Aviation Series-Space Series - Aluminum alloy AL-P7175 - T7351 - Sheet - 6mm <a? 100 mm

TS EN 16602-70-36: 2014 Space product assurance - Material selection for print-decay crack control

TS EN 16602-70-37: 2014 Space product assurance - Determination of the sensitivity of metals to stress-decay cracks

TS EN 16602-70-45: 2014 Space product assurance - Mechanical testing of metallic materials

TS EN 4630: 2014 Aviation series - Steel fe-Pm 3504 (x4crnimo16-5-1) - Air melted - Hardened and tempered - Forgings - De <200 mm - 900 mpa <rm <1050 mpa

TS EN 4627: 2014 Aviation series - Steel fe-Pm 3504 (x4crnimo16-5-1) - Air melted - Hardened and tempered - Forgings - De <150 mm - 1100 mpa <rm <1300 mpa

TS EN 4707: 2014 Aviation series - Acid cleaning of hexavalent chromium-free aluminum and aluminum alloys

TS EN 4293: 2014 Aviation series - Aluminum alloy, AL-P7175 - T73511 - Extruded rod and section - a or D? 150 mm

TS EN 2402: 2014 Aviation series - Heat resistant nickel based alloy NiCr20Co3Fe3 - Annealed (hardened) - Wire - D? 10 mm

TS EN 3825 Aviation series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD

TS EN 3826 Aviation series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD

TS EN 3827 Aviation series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

TS EN 2032-001 Aviation series - Metallic materials - Part 001: Classic illustration

TS EN 4725 Aviation series - Aluminum alloy AL- P2024- Al Cu4Mg1 - T351 - Plate - 6 mm <a? 150 mm

TS EN 2226 Aviation series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Forging by hand and die - De? 150 mm

TS EN 2589 Aviation series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm? a? 3 mm - Dimensions

TS EN 2590 Aerospace series - Steel - Hot rolled sheets and sheets

TS EN 4827 Aviation series - Hexavalent chromium-free anodizing of aluminum and aluminum alloys

TS EN 2033 Aviation series - Cold rolled steel, Thickness 0,1 mm? a? 2,5 mm - Dimensions

TS EN 2823 Aerospace series - Fiber reinforced plastics - Determination of the effect of physical and mechanical characteristics exposed to humid atmosphere

TS 10885 Plastics - Polytetrafluoroethylene (PTFE) - Water dispersions

TS EN 4800-002: 2010 Aviation series-Titanium and titanium alloys- Technical specifications- Part 002: Rods and profiles

TS EN 4800-007: 2010 Aerospace series - Titanium and titanium alloys - Technical specifications - Part 006: Melting drafts

TS EN 2002-002 Aviation series - Metallic materials - Test methods - Part 2: Tensile test at elevated temperature aviation series - Metallic materials - Test methods - Part 2: Tensile test at elevated temperature

TS EN 2002-001 Aerospace series -Metal material-Test methods-Part 1: Tensile test at ambient temperature

TS EN 2002-005 Aerospace series - Metallic materials-Test methods-Part 005: Continuous drift and tension -Completion test

TS EN 2003-009 Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination

TS EN 2003-010 Aerospace series - Test methods - Titanium and titanium alloys - Part 010: Sampling for the determination of hydrogen content

TS EN 2004-5 Aerospace series - Test methods for aluminum and aluminum alloy products - Part 5: Determination of the coating thickness of the semi-finished products and the copper penetration to this coating

TS EN 2032-2 Aerospace series - Metallic materials - Part 2: Coding of metallurgical properties on delivery

TS EN 2045 Aviation series-Aluminum and aluminum alloy square bars-Tolerance class h 11, thickness 6 mm to 50 mm, dimensions

TS EN 2046 Aviation series - Hexagonal rods, drawn from aluminum and aluminum alloys - Tolerance class h11; Width of the key blade 7-50 mm. dimensions

TS EN 2047 Aviation series-Corded l-Profiles made of extruded aluminum alloys-Dimensions

TS EN 2048 Aviation series-L-profiles, extruded from aluminum alloys-Dimensions

TS EN 2049 Aviation series-U-Profiles, extruded from aluminum alloys - Dimensions

TS EN 2050 Aviation series-T-profiles, made of extruded aluminum alloys-Dimensions

TS EN 2066 Aviation series-Aluminum alloy extruded profiles-General tolerances

TS EN 2070-3 Aerospace series - Aluminum and aluminum alloy - Formable products - Technical specifications - Part 3: Rods and profiles

TS EN 2070-4 Aerospace series - Aluminum and aluminum alloy - Formable products - Technical specifications - Part 4: Pipe used in buildings

TS EN 2071 Aviation series-Aluminum and aluminum alloy sheets-Thickness 0,25 -6 mm-Dimensions

TS EN 2072 Aviation-Aluminum a1-P1050a h14; Plate and strip 0,4 to 6 mm

TS EN 2076-1 Aerospace series-Aluminum and magnesium alloy ingots and castings-Technical specifications-Section 1: General specifications

TS EN 2076-2 Aviation series; Aluminum and magnesium alloy ingots and castings - Technical specifications section 2: Ingots for remelting

TS EN 2076-3 Aerospace series, aluminum and magnesium alloy ingots and castings - Technical specifications - Part 3: Pre-production and production castings

TS EN 2082-1 + A1 Aviation-Aluminum alloy forging stock and forging, technical specifications, section 1: General rules

TS EN 2082-2 Aviation-Aluminum alloy forging stock and forging, technical specifications; Section 2: Tattoo stock

TS EN 2085 Aviation series - Aluminum alloy al-P2618a-T6 - Forging by hand and die a <150 mm

TS EN 2086 Aviation series - Aluminum alloy al-P2618a-T851 - Forging by hand and die a <150 mm

TS EN 2087 Aviation series - Aluminum alloy al-P2014a-T6 or t62 - Coated sheet and strip - 0 mm <a <4 mm

TS EN 2092 Aviation-Aluminum alloy a1-P7075-T6 or t62 coating plate and strip 0,4 a 6 mm

TS EN 2093 Aviation-Aluminum alloy al-P7009-T74, forged 20 mm to 150 mm

TS EN 2094 Aviation-Aluminum alloy al-P7009-T74; Hand tattoos 20 mm to 150 mm

TS EN 2100 Aviation-Aluminum alloy al-P2014a-T4511, extruded rods and a part or d 200mm

TS EN 2103-1 Aerospace series - Re-melting drafts and castings made of steel, nickel-based and cobalt-based alloys - Technical specifications - Part 1: General rules

TS EN 2104 Aviation-Acrylonitrile-Butadiene rubber (nbr) -40 hardness armor

TS EN 2115 Aviation series - Aluminum alloy 2117-T42 - Binding wire for solid rivets - D <10 mm

TS EN 2116 Aviation series - Aluminum alloy 2017a-T42 - Binding wire for solid rivets - D <10 mm

TS EN 2117 Aviation series - Aluminum alloy al-P5056a (5056a) -H32 - Binding wire for solid rivets - D <10 mm

TS EN 2126 Aviation-Aluminum alloy al-P7075-T651; Plates 6 mm to 80 mm

TS EN 2127 Aviation-Aluminum alloy al-P7075-T73511; Extruded bars and part a or d 100 mm

TS EN 2128 Aviation-Aluminum alloy, al-P7075-T7351; Drawn bars 6 mm a or d 75 mm

TS EN ISO 2128 Aluminum and aluminum alloys - Determination of thickness in anodic oxide coatings - Non-destructive testing with double beam microscope

TS EN 2134 Aviation series - Round bars, extruded from aluminum and aluminum alloys - Diameter 10mm? D ? 220mm - Dimensions

TS EN 2157-1 Aviation series-Steel-Forging draft and forging-Technical specifications; Section 1: General rules

TS EN 2157-2 Aviation series - Steel - Forging draft and forging - Technical specifications - Part 2: Forging draft

TS EN 2157-3 Aviation series - Steel - Forging draft and forging - Technical specifications - Part 3: Semi-finished and finished forging

TS EN 2205 Aviation series - Steel fe-Pl1502 (25crmo4) - 900 mpa <rm> <1100 mpa - Rod - De> 40 mm

TS EN 2209 Aviation series- Steel fe-Pl1502 (25crmo4) - 900 mpa <rm <1100 mpa - Plate, strip and sheet - 0 mm <a <5 mm

TS EN 2243-6 Aerospace series - Non-metallic material - Structural adhesives - Test method - Part 6: Shear stress and determination of shear elongation

TS EN 2243-1 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single-layer slip

TS EN 2243-3 Aviation series-Structural adhesives-Test methods-Part 3: Metal-honeycomb body stripping test

TS EN 2243-2 Aerospace series-Structural adhesives-Test methods-Part 2: Metal-Metal stripping test

TS EN 2243-4 Aviation series-Structural adhesives-Test methods section 4: Metal honeycomb body-Tensile test in horizontal position

TS EN 2243-5 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Aging tests

TS EN 2256 Aviation series - Al-P2618a- T852 aluminum alloy - Forging by hand and die a <150 mm

TS EN 2318 Aviation series-Al-P2024-T3511 aluminum alloy, 1,2 mm

TS EN 2326 Aviation series-Al-P6082-T6 aluminum alloy, a or d <200 mm sections and extruded 200 mm or a part and extruded bars

TS EN 2332 Aerospace series-Textile glass fiber pre-impregnation materials-Test method for determination of resin flow

TS EN 2339 Aviation series - Sheet metal, made of titanium and titanium alloy - Cold rolled - Thickness 0,2 mm? A? 6 mm - Dimensions

TS EN 2375 Aviation-Resin-pre-impregnated materials-Sampling from manufacturing lot

TS EN 2377 Aerospace - Glass fiber reinforced plastics - Test method - Determination of apparent shear strength between layers

TS EN 2384 Aviation series- Al-P2014a-T6511; Aluminum alloy; Cross sections A or d <150 mm and extruded bars

TS EN 2385 Aviation series-Al-P7009-T74511 aluminum alloy, a or d <125 mm sections and extruded bars

TS EN 2395 Aviation series - Aluminum alloy, al - P2014a - T4 or t42 - Sheet and strip - 0,4 mm? A? 6 mm

TS EN 2398 Aviation series - Heat resistant steel fe-Pa2601 (x6nicrtimov26-15) - Rm? 900 mpa - Rods for machined bolts - D? 25 is mm

TS EN 2399 Aviation series - Heat resistant steel fe-Pa2601 (x4nicrtimov26-15) - Rm? 900 mpa - Rods for forged bolts - D? 25 is mm

TS EN 2428 Aviation-Ethylene-Propylene rubber (epm / epdm) -Hardness degree 50 armor

TS EN 2430 Aviation series-Ethylene-Propylene rubber (epm / epdm) -Hardness degree 70 armor

TS EN 2431 Aviation series-Ethylene-Propylene rubber

TS EN 2432 Aviation series - Ethylene propylene rubber (epm / epdm) - Degree of hardness 90 armor

TS EN 2438 Aviation series - Steel fe-Pl2102 (35nicr6) - 900 mpa <rm <1100 mpa - Rod - De <40 mm

TS EN 2439 Aviation series - Steel fe-Pl2102 (35nicr6) - 900 mpa <rm <1100 mpa - Forgings - De <40 mm

TS EN 2446 Aviation series - Steel fe-Pl1503 (35crmo4) - 1100 mpa <rm <1300 mpa - Rods - De <25 mm

TS EN 2448 Aviation series - Steel fe-Pl1503 (35crmo4) - 900 mpa <rm <1100 mpa - Rods - De <40 mm

TS EN 2469 Aerospace series - Steel fe-Pa3901 (x1crni18-10) - Melted with air - Softened - Wires - Diameter 0, 4 mm to 12, 5 mm - Rm 450 mpa to 650 mpa

TS EN 2478 Aviation series - Steel fe-Pl2107 (30nicrmo16) - 1220 mpa <rm <1370 mpa - Rods - De <40 mm

TS EN 2480 Aviation series - Steel fe-Pl2108 (36nicrmo16) - 1250 mpa <rm <1400 mpa - Rods - De <75 mm

TS EN 2481: 2010 Aviation series- Steel steel fe-Pl2108 (35nicrmo16) -1250 mpa = rm = 1 400 mpa - Forging - De = 75 mm

TS EN 2482: 2010 Aviation series - Steel steel fe-Pl2108 (35nicrmo16) -1100 mpa = rm = 1 300 mpa - Rods - De = 100 mm

TS EN 2483: 2010 Aviation series- Steel steel fe-Pl2108 (35nicrmo16) -1100 mpa = rm = 1 300 mpa - Forging - De = 100 mm

TS EN 2486 Aviation series - Aluminum alloy al-P2124a - T351 - Plate - 25 mm <a <120 mm

TS EN 2511 Aviation srisi - Aluminum alloy al-P7075 - T7351 - Plate - 6 mm <a <100 mm

TS EN 2542 Aviation series - Steel fe-Pl1502 (25crmo4) - Annealed - Rod and wire - De <40 mm - For the largest torque nuts

TS EN 2543 Aviation series - Steel fe-Pl1502 (25crmo4) - Annealed - Plate and strip - 0 mm <a <3 mm - For the largest torque nuts

TS EN 2557 Aerospace series - Pre-impregnated carbon fibers - Determination of mass per unit area

TS EN 2558 Aerospace series - Pre-impregnated carbon fibers - Determination of volatile content

TS EN 2559 Aerospace series - Pre-impregnated carbon fibers - Determination of resin and fiber contents and fiber mass per unit area

TS EN 2560 Aerospace series - Pre-impregnated carbon fiber - Determination of resin flow

TS EN 2563 Aerospace - Carbon fiber reinforced plastics - One-way laminates - Determination of apparent shear strength between layers

TS EN 2564 Aerospace series - Carbon fiber sheets - Determination of fiber, resin and void

TS EN 2597 Aviation series - Carbon fiber reinforced plastics - Unidirectional layers - Tensile test perpendicular to the fiber direction

TS EN 2630 Aviation series-Al-P 7009-T74511 aluminum alloy; Lateral coarse grain control, a or d <125 mm sections and extruded bars

TS EN 2632 Aviation series-Alp7075-T73511 aluminum alloy; Lateral coarse grain control, a or d <100 mm sections and extruded bars

TS EN 2635 Aviation series - Aluminum alloy al-P2014a - T6511 - Extruded rod and profile with environmental coarse grain control a or d <200 mm

TS EN 2636 Aviation series-Al-P6082-T6 aluminum alloy; Lateral coarse grain control, a or d <200 mm sections and extruded bars

TS EN 2667-6 Aerospace series -Metal materials-Structural foam adhesives-Test methods-Part 6: Determination of water adsorption

TS EN 2681 Aviation series - Aluminum alloy al-P7010-T74 - Forging by hand or die a <150 mm

TS EN 2684 Aviation series - Aluminum alloy al-P7010-T7651 - Plate, 6 mm <a <140 mm

TS EN 2687 Aviation series - Aluminum alloy al-P7010-T745 - Plate, 6 mm <a <160 mm

TS EN 2731 Aviation series - Magnesium alloy mg-C46001-T6 - Sand casting

TS EN 2732 Aviation series - Magnesium alloy mg-C46001-T6 - Cold die casting

TS EN 2743 Aerospace series-Fiber-reinforced plastics-Standard processes for conditioning of un-aged materials before tests

TS EN 2744 Aviation series - Non-metallic materials preferred test temperatures

TS EN 2781 Aviation series - Non-metal materials - Structural binders - Test methods - Determination of lining thickness

TS EN 2803 Aviation series - Aluminum alloy al-P7475 - T761 - Coated sheet and strip - 1 mm <a <6 mm

TS EN 2815 Aviation series - Steel fe-Pm1802 (x5crnicu15-5) - Re-melted using consumable electrodes - Treated with chemical solution and treated with precipitate - Rods for machining - A or d? 200 mm - Rm? 965 mpa

TS EN 2817 Aviation series - Steel fe-Pm1802 (x5crnicu15-5) - Re-melted consumable electrode - Chemically treated and precipitated - Rod to remove sawdust - A or d? 200 mm - Rm? 1070 mpa

TS EN 2831 Aviation series-Hydrogen brittleness in steel-Slow bending test

TS EN 2832 Aviation series-Hydrogen brittleness in steel-Notched sample test

TS EN 2858-1 Aviation series - Titanium and titanium alloys - Forgings and forgings - Technical specifications - Part 1: General requirements

TS EN 2858-2 Aviation series - Titanium and titanium alloys - Forged billets and forged parts - Technical specifications - Part 2: Forged billets

TS EN 2858-3 Aviation series - Titanium and titanium alloys - Forgings and forgings - Technical specifications - Part 3: Pre-production and production of forgings

TS EN 2947 Aviation series - Steel fe-Pa3901 (x2crni18-9) - Melted with air - No heat treatment - Cold drawn steel wire - A or d 2, 3 mm

TS EN 2950 Aerospace series - Test method - Processed, heat resistant alloys - Semi-finished products and parts - Macrographic and micrographic inspection conditions - Structure content and defects

TS EN 2954-002 Aerospace series - Macro structure of machined titanium alloy products - Part 002: Macro structure of rods, profiles, forging drafts and forging

TS EN 3114-001 Aerospace series - Test method - Microstructure of processed titanium alloy (+) products - Part 001: General specifications

TS EN 3114-002 Aerospace series - Test method - Microstructure of processed titanium alloy (+) products - Part 002: Microstructure of rods, sections, forgings and forgings

TS EN 3114-004 Aerospace series - Test method - Microstructure of processed titanium alloy (+) products - Part 004: Microstructure of the sheet for superplastic forming

TS EN 3114-003 Aerospace series - Test method - Microstructure of processed titanium alloy (+) products - Part 004: Microstructure of sheet

TS EN 3115 Aviation series - Aluminum alloy 7050-T73 - Wire for solid rivets - D <10 mm

TS EN 3145 Aviation series - Round bars, steel, hot rolled - Normal tolerances - Diameter 6 mm d 250 mm dimensions

TS EN 3146 Aviation series-Round bars, hot-rolled, steel, with threaded diameter-Diameter 6 mm d 250 mm-Dimensions

TS EN 3160 Aerospace series - Steel fe-Pm3801 (x5crnicu17-4) - Air melted, chemical solution treated and settled rod - Diameter d <200 mm and rupture stress rm <1310 mpa

TS EN 3161 Aerospace series - Steel fe-Pm3801 (x5crnicu17-4) - Air melted, chemical solution treated and settled rod - Diameter d <200 mm and rupture stress rm <930 mpa

TS EN 3163 Aviation series - Steel fe-Pm3801 (x5crnicu17-4) - Air melted, soft, forged - Diameter d <300 mm

TS EN 3207 Aviation - Rubber compounds - Technical specifications

TS EN 3311 Aviation series - Titanium alloy ti-P64001 (ti-6al-4v) - Annealed - Rods for machining - D <110 mm

TS EN 3329 Aviation series - Steel fe-Pl1503 (35crmo4) - Annealed - Sheet and strip - 0, 3 mm? a? 2 mm - for the largest torque nuts

TS EN 3332 Aviation series - Aluminum alloy al-P7475 - T762 - Coated sheet and strips - 1 mm <a <6 mm

TS EN 3333 Aviation series - Aluminum alloy al-P7475 - T762 - Sheet and strips - 1 mm <a <6 mm

TS EN 3335 Aviation series - Aluminum alloy al-P7475 - O2 - Sheet for superplastic forming (spf) - 0 mm <a <8 mm

TS EN 3338 Aviation series - Aluminum alloy al-P7050 - T74511 - Extruded rod and profile with environmental coarse grain control a or d <150 mm

TS EN 3339: 2006 Aerospace series - Aluminum alloy al-P7010-T76 - Forging in mold - Thickness 200 mm or larger

TS EN 3344 Aviation series - Aluminum alloy al-P7050 - T76511 - Extruded rod and profile with environmental coarse grain control a or d <150 mm

TS EN 3347 Aviation series - Aluminum alloy al-P7050 - T8511 - Extruded rod and profile with environmental coarse grain control a or d <150 mm

TS EN 3359 Aviation series - Steel fe-Pm1503 (x3crnimoal13-8-2) - Melted and melted in vacuum using consumables, soft, forged, thickness a and diameter less than 300 mm

TS EN 3361 Aviation series - Steel fe-Pm1802 (x5crnicu15-5) - Remelted using consumable electrode, treated with chemical solution and treated with precipitate, plate and strip, thickness a <6 mm, 1070 mpa <rm < Which is 1220 mpa