Aircraft and Space Vehicle Engineering, Coatings and Related Processes Standards Used in Aircraft and Space Vehicle Industry

Using national and international methods, we provide reliable, timely, independent, impartial testing and auditing services to customers within the framework of legal legislation. We provide testing, auditing and certification services to all of the following standards.

TS EN 2334 Aviation series-Aluminum and aluminum alloys with chromic-Sulfuric acid cleaning

TS EN 2070-6 Aerospace series - Aluminum, aluminum alloy, formable products technical specifications part 6: Rivet wire

TS EN 2070-5 Aerospace series-Aluminum and aluminum alloys-Formable products technical specifications part 5: Pipes used under pressure

TS EN 2070-1 Aluminum and aluminum alloys used in aeronautics-Technical specifications-Part 1: General principles

TS EN 2070-7 Aerospace series - Aluminum and aluminum alloy shaped products technical specifications part 7: Forging drafts

TS EN 2331 Aerospace series - Textile glass fiber treated products - Determination of resin and fiber content and fiber mass per unit area.

TS EN 2070-2 Aerospace series-Aluminum and aluminum alloys in formable products-Technical specifications part 2 sheet, strip, shaped profiles and sheet

TS EN 2378 Aerospace - Fiber reinforced plastics - Determination of water absorption by immersion method

TS EN 3030 Aviation series - Dry film lubricants - Determination of solids content

TS EN 3032 Aviation series - Lubricants applied as dry film - Measurement of film thickness

TS EN 2122 Aviation-Washer in flat-chromated or anodized aluminum alloys

TS EN 2155-21 Aerospace series - Test methods for transparent materials used as glass in aircraft part 21: Determination of resistance to crack propagation (k factor)

TS EN 2536 Aerospace series - Strict anodic oxidation of aluminum alloys

TS EN 2912 Aerospace series - Aluminum alloy washers, graded or chrome plated - Flat, large diameter

TS EN 2926 Aviation series-Bolts with double hexagonal head, free body, long thread, heat-resistant steel fe-Pa92ht 8a286) silver-plated Classification 900 mpa (at ambient temperature) / 650 ° c

TS EN 2927 Aviation series-Bolts, double hexagonal head, free body, long screw thread, heat resistant nickel base alloy nı-P100ht (inconel 718) -Classification: 1275 mpa (at ambient temperature) / 650 ° c

TS EN 3012 Aviation series-Nuts, double hexagonal, self-locking, made of heat-resistant nickel-based alloy Ni-P101 ht (waspaloy) -Classification: 1210 MPa (at ambient temperature) / 730 ° c

TS EN 2928 Aviation series-Bolts, double hexagonal head body, long thread, heat-resistant nickel-based alloy nI-P100ht (inconel 718), silver plated-Classification: 1275 mpa (ambient temperature) / 650 ° c

TS EN 2929 Aviation series-Bolts, double hexagonal head, free body, long screw thread, heat resistant nickel base alloy nı-P101ht (waspaloy) -Classification: 1210 mpa (ambient temperature) / 730 ° c

TS EN 2931 Aviation series-Bolts with t-head, free body long thread, heat-resistant steel fe-Pa92ht (a286) -Classification: 900 mpa (ambient temperature) / 650 ° c

TS EN 2932 Aviation series-Bolts, t-head, free body long threaded heat-resistant steel fe-Pa92ht (a286), silver-plated-Classification: 900 mpa (ambient temperature) / 650 ° c

TS EN 2933 Aviation series-Bolts, t-headed, free body, long threaded, heat resistant nickel-based alloy nı-P100ht (inconel 718 (-Classification: 1275 mpa (ambient temperature) / 650 ° c

TS EN 3202 Aviation series-Holes and claws for T-head bolts - Design standard

TS EN 2934 Aviation series-Bolts with t-head, free body long thread, heat-resistant nickel-based alloy nI-P100ht (inconel 718), silver-plated-Classification: 1275 mpa (ambient temperature) / 650 ° c

TS EN 2935 Aviation series-Bolts t-Headed, free body, heat-resistant nickel-based alloy nI-P101ht (waspaloy) -Classification: 1210 mpa (ambient temperature) / 730 ° c

TS EN 2936 Aviation series-Bolts, t-head, free body long thread, heat-resistant nickel-based alloy nI-P101ht (waspaloy), silver plated-Classification: 1210 mpa (ambient temperature) / 730 ° c

TS EN 2437 Aviation series - Chrome-plated coating for aluminum and aluminum alloys (yellow)

TS EN 2437 Aviation series - Chromate coating process for aluminum and aluminum alloys (yellow)

TS EN 2157-2 Aviation series-Steel; Tattoo stock and tattoos; Technicial Specifications; Section 2: Tattoo stock

TS EN 2157-3 Aviation-Steel, forging stock and forging technical specifications; Section 3: Pre-production and production forks

TS EN 2436-002 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-free, two-component, cold-fired primer - Part 002: High corrosion resistance

TS EN 2436-004 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-free, two-component, cold-fired primer paint - Part 004: High corrosion and chemical liquid resistance with surface preparation tolerance

TS EN 2436-005 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-free, two-component, cold-fired primer - Part 005: For external use with surface preparation tolerance

TS EN 4637 Aviation series - Spraying media - White corundum

TS EN 4638 Aviation series - Spraying media - Brown corundum, non-ferrous

TS EN 4473 Aviation series - Aluminum pigment coatings for fasteners - Technical specifications

TS EN 2434-004 Aerospace series - Two-component, cold-fired polyurethane topcoat - Part 004-High flexibility

TS EN 2434-002 Aerospace series - Two-component, cold-fired polyurethane topcoat - Part 002-High chemical resistance

TS EN 4160 Aerospace series - Paints and varnishes - Determination of the effect against heat

TS EN 4593 Aviation series-Paints and varnishes-Determination of sun absorption

TS 8160 Aviation series - Tensile strength 1249 bolts and freely rotating / moving nuts not exceeding MPa - General features

TS EN 2949 Aviation series - Washer, made of corrosion-resistant steel with wire locking, passivated

TS EN 2949 Aviation series - washer for corrosion-resistant, passivated steels, wire locking

TS EN 4195 Aviation series-Paints and varnishes-Test method for determination of chromate leakage

TS EN 4171 Aviation series-Paints and varnishes-Test method for determination of phosphoric acid index

TS EN 4159: 2011 (EN) Aviation series-Paints and varnishes-Determination of resistance to microbial growth

TS EN 4687 Aviation series - Paints and varnishes - Chrome-free, corrosion-resistant, two-component, cold-treated primer for military applications

TS EN 4689 Aerospace series - Paints varnishes - Two-component cold-treated polyurethane lacquer - High flexibility and chemical resistance for military applications

TS EN 4688 Aerospace series - Paints and varnishes - Two-component, cold-treated primer for corrosion prevention in military applications

TS EN 4595 Aviation series - Paints and varnishes - Two component, cold curing polyurethane coating - Subsonic wear resistance

TS EN 4594 Aviation series - Paints and varnishes - Two component, cold curing polyurethane coating - Supersonic abrasion resistance

TS EN 2491 Aviation series - Molybdenum disulfide - Dry film lubricants - Coating methods

TS EN 2887 Aviation series - Bolts, hexagon head, threaded to the head, corrosion-resistant steel, passivated - Classification 600 mpa (at ambient temperature) 425

TS EN 2261 Aviation series-Silicone rubber (VMQ) - 70 armor hardness

TS EN 2928 Aviation series - Bolts, double hexagonal head, thinned body, long screw thread, heat resistant, made of nickel based alloy, NI-P100HT (inconel 718), silver plated- Classification: 1 275 MPa (at ambient temperature) / 650 ° C

TS EN 2885 Aviation series-Bolts-Cylinder-headed, with rounded edges, positive-groove, coarse tolerance normal body, short screw, alloy steel, cadmium plated-Classification: 900 MPa (at ambient temperature) / 235 ° C

TS EN 2489 Aerospace - Fiber reinforced plastics - Determination of the effect of test fluids

TS EN 2561 Aviation-Carbon fiber reinforced plastics-One-way slabs-Tensile test parallel to fiber direction

TSE K 256 Elastomeric Resin Based Polypropylene Microfibre Liquid Plastic Coating Material

TS EN 16602-70-13: 2015 Space product assurance - Measurement of shell and peel strength of topcoats and coatings using pressure sensitive tapes

TS EN 4826 Aerospace series - Determined tensile strength? 1 450 Zinc-nickel (12-16% Ni) plating of steels with Mpa steels, aluminum alloys for copper alloys, parts and binders

TS 9027 Aircraft ducting and pipe systems - Flange profile dimensions for V-band couplings

TS EN 4827 Aviation series - Hexavalent chromium-free anodizing of aluminum and aluminum alloys

TS EN 2004-5 Aerospace series - Test methods for aluminum and aluminum alloy products - Part 5: Determination of the coating thickness of the semi-finished products and the copper penetration to this coating

TS EN 2082-3 Aviation-Aluminum alloy forging stock and forging technical specifications, section 3: Pre-production and production of forging

TS EN 2101 Aviation series-Aluminum and formable aluminum alloys-Anodic coating using chromic acid

TS EN 2133: 2010 Aviation series - Cadmium plating - Cadmium plating of small steels, copper and copper alloys and nickel alloys to specified tensile strength 1450 mp

TS EN 2155-14 Aerospace series - Test methods for transparent materials for aircraft polishing; Part 14: Determination of the 1 / 10 vicat softening temperature

TS EN 2264 Aviation series-Cadmium plated, lubricated with mos2, alloy steel, self-locking, floating, two-prong, countersunk nuts-Classification; 900 mpa (at ambient temperature / 235 ° c)

TS EN 2381 Aviation-Aluminum alloy al-P7009-T7452; Handmade 40 mm to 150 mm

TS EN 2429 Aviation series-Ethylene-Propylene rubber (epm / epdm) -Hardness degree 60 armor

TS EN 2434-003: 2010 Aviation series - Two-component, cold-fired polyurethane topcoat - Part 003-Flexible and high fluid resistance for interior

TS EN 2434-001: 2010 Aviation series - Two-component, cold-fired polyurethane topcoat - Part 001-Key features

TS EN 2434-005 Aerospace series - Paints and varnishes - Two-component, cold-fired polyurethane topcoat - Part 005: High flexibility and chemical resistance for military applications

TS EN 2435-001 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-plated, two-component, cold-fired primer - Part 001: Minimum specifications

TS EN 2435-002 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-plated, two-component, cold-fired primer - Part 002: High corrosion resistance

TS EN 2435-003 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-plated, two-component, cold-fired primer - Part 003: High corrosion and chemical liquid resistance

TS EN 2435-004 Aerospace series - Paints and varnishes - Corrosion-resistant, chrome-plated, two-component, cold-baked primer - Part 004: High corrosion and chemical resistance with surface preparation tolerance

TS EN 2435-005 Aviation series - Paints and varnishes - Corrosion-resistant, chrome-plated, two-component, cold-fired primer - Part 005: High corrosion resistance for military applications

TS EN 2436-001 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-plated, two-component, cold-fired primer - Part 001: Key features

TS EN 2436-003 Aerospace series - Paints and varnishes - Corrosion resistant, chrome-free, two-component, cold-fired primer - Part 003: High corrosion and chemical liquid resistance

TS EN 2436-006 Aerospace series - Paints and varnishes - Corrosion-resistant, chrome-free, two-component, cold-fired primer - Part 006: High corrosion resistance for military applications

TS EN 2497 Aerospace series - Dry sand blasting process for titanium and titanium alloys

TS EN 2516 Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel based alloys

TS EN 2536 Aerospace series - Hard anodic coating of aluminum alloys (anodizing)

TS EN 2545-1 Aerospace series - Melting dies and castings made of titanium and alloy - Technical specifications - Part 1: General rules

TS EN 2574 Aviation series - Resources - Technical data

TS EN 2601 Aviation series-Fork tines, adjustable-Technical specifications

TS EN 2633 Aviation series-Al-P2024-T3511 aluminum alloy, with lateral coarse particle control, 1,2 mm

TS EN 2651 Aviation-Screws, pan head, slotted, rework, brass, tin-plated Classification: 380 mpa (at ambient temperature) / 80 ° c

TS EN 2790 Aviation-Rod heads, adjustable, self-adjusting plane bearing, self-lubricating sleeve and threaded bearing with thread <diameter> 1,5 use; Dimensions and loads

TS EN 2791 Aviation-Tie rod ends, adjustable, single fork and threaded body with the use of tooth <diameter> 1,5; Dimensions and loads

TS EN 2792 Aviation; Body threaded with tie rod ends, adjustable, double tines and the use of teeth <diameter> 1,5; Dimensions and loads

TS EN 2808 Aviation series-Anodization of titanium and titanium alloys

TS EN 2828 Aviation series; Adhesion test of metal coatings with polishing

TS EN 2829 Aerospace series - Adhesion test for metallic coatings with impact shots

TS EN 2830 Aviation series-Adhesion test of metallic coatings with shear effect

TS EN 2914 Aerospace series - Large diameter flat washers made of heat-resistant steel with corrosion-resistant surfaces

TS EN 2940 Aviation series-Bolts, 100 ° with countersunk head, screwed up to the head axis, screwed up to the head, made of heat-resistant steel fe-Pa92 ht (a286), silver-plated-Classification: 900 mpa (at ambient temperature) / 650 ° c

TS EN 2955 Aviation series - Recovery of titanium and titanium alloy scrap

TS EN 3006 Aviation series-Bolts made of fe-Pa92ht (a286) with hexagonal head, lightweight body, long screw, temperature resistant steel-Classification: 900 mpa (at ambient temperature) / 650 ° c

TS 3012 Performance requirements of the level switches used in aircraft

TS EN 3026 Aerospace series - Dry film lubricants - Corrosion test on steel samples

TS EN 3027 Aviation series - Dry film lubricants - Salt spray test

TS EN 3064 Aviation series - Casing knurled nuts - Self-locking - Assembly process

TS EN 3065 Aviation series - Mounting holes for self-locking nuts with knurled body - Standard design

TS EN 3149 Aviation series-Housing nuts-Mounting holes, forged in 60 ° mold, flanges-Design standard

TS EN 3150 Aviation series-Pins, angled, headless, heat-resistant nickel-based nı-P100ht alloy (inconel 718)

TS EN 3151 Aviation series-Fixing pins-Flat, heat-resistant nI-P100ht made of nickel-based alloy

TS EN 3212 Aviation series-Paints and varnishes-Corrosion test by sequential immersion in buffered sodium chloride solution

TS EN 3285 Aerospace series - Rolling bearings - Steel, cadmium coated - A row of deep groove ball - Aircraft structure rotating - Diameter series 0 and 2 are - Normal cavity category - Dimensions and loads

TS EN 3377 Aviation series-Nuts, hexagonal, self-locking, made of heat-resistant fe-Pa92ht (a286) steel-Classification: 1100 mpa (at ambient temperature) / 425 ° c

TS EN 3380 Aviation series - Safety segments - Technical specifications

TS EN 3381 Aviation series- Bolts, 100 ° countersunk normal head- Cross-shaped slot with the edges offset from the slot axis- Regular body with narrow tolerance- Short screw thread- Made of titanium, lubricated with anodized mos <2> - Classification: 1100 mpa ambient temperature 315 ° C

TS EN 3446 Aviation series-Bearings, corrosion-resistant steel flange-free full sphere, dimensions and loads for equipment and tools

TS EN 3541 Aerospace series - Rod end - Adjustable, self-aligning ball bearing, threaded into housing - Dimensions, moments, gaps and loads

TS EN 3543 Aviation - Bolts 100 ° with countersunk normal head - Edged off the housing axis plus housing with narrow tolerances - Normal body - Short thread - Passivated classification made of heat and corrosion resistant steel: 1100 mpa at ambient temperature / 425 ° c

TS EN 3644 Aviation series-Rivets, solid, universal head, titanium ti-Po2, anodized inch based series

TS EN 3665 Aviation series - Test methods for paints and varnishes - Fiber corrosion resistance test in aluminum alloys

TS EN 3720 Aviation series-Nuts, double hex, self-locking, heat-resistant steel fe-Pa 92 ht (a286), mos <2> coated-Classification: 1100 mpa (at ambient temperature) 425 ° c

TS EN 3769 Aviation series - Electrolytic polishing of corrosion-resistant steels and heat-resistant alloys

TS EN 3840 Aviation series - Paints and varnishes - Technical specifications

TS EN 4069 Aviation series-Nuts, hexagon, plane, reduced height, leveled to flatness, heat-resistant steel, passivated-Classification: 600 mpa (at ambient temperature) / 650 ° c

TS EN 4158 Aviation series - Paints and varnishes - Test method for measuring the electrical surface resistance of conductive layers

TS EN 4170 Aviation series - Paints and varnishes - Test method for measuring resistance to cracking cold temperature cycling

TS EN 4406 Aerospace series - Paints and varnishes - Two-component, cold-treated polyurethane coating - Abrasion resistant

TS EN 4474 Aviation series - Coatings with aluminum coloring - Coating methods

TS EN 4476: 2011 Aviation series-Paints and varnishes-Cold-cured intermediate coating

TS EN 4508 Aviation series - Paints and varnishes - Test method for non-slip coatings - Determination of slip friction behavior

TS EN 4588 Aviation series - Paints and varnishes - Two component, cold-treated polyurethane paint, non-slip

TS EN 4592 Aviation series - Paints and varnishes - Test method for determination of infrared reflectance

TS 6480 Airplanes - Seal wire

TS 6481 Dimensions of the single-hole fitting to which the Air-Arm operated manual switches are connected (class 1 and class 2)

tst 6482 ISO 245 Aircraft safety wire-Dimensions

TS 6827 Aircraft-Oxygen Circulation Regulator Masks for Personnel Use

TS 6940 Airplanes - Non-metallic rollers with ball bearings for control cables - Dimensions and loads

TS 7295 Center-mounted "q" clamps for aerospace systems

TS 7611 Aviation-Self-locking nuts with a maximum operating temperature above 425øc - Manufacturing specifications

TS 7928 Airplanes-Fasteners-Flat-head steel bolts-Short tooth length (3a class) -Whotworth thread

TS 7929 Airplanes - Fasteners - Hex bolts - Short tooth length (3a class) - Whitworth screw thread

TS ISO 8074 Aerospace series - Surface treatment of austenitic stainless steel parts

TS ISO 8075 Aerospace series - Surface treatment of hardenable stainless steel parts

TS ISO 8078 Aviation series - Anodic treatment of aluminum alloys - Sulfuric acid treatment, colorless coating

TS ISO 8079 Aviation series - Anodic oxidation of aluminum alloys - Sulfuric acid treatment, colored coating

TS ISO 8080 Aviation series - Anodic treatment of titanium and titanium alloys - Sulfuric acid treatment

TS ISO 8081 Aerospace series - Chemical conversion coating for aluminum alloys - General purpose

TS 8377 Airplanes - Rolling bearings - Specification, limit dimensions, tolerances and permissible static loads

tst 8746 ISO 8788 Shape and position tolerances for aviation fasteners and nuts

TS 9027 Aircraft pipe and ducting systems - Flanges of band fittings - Profile dimensions

TS 9032 Fasteners - Space and aerospace - Shape and size tolerances of bolts and screws

TS 9252 Airplanes - Grease nipples dimensions

TS 9932 Aviation - Bolts, metric - Made of alloy steel - Tensile strength at least 1100 n / mm2

TS EN 14099 Space products assurance - Measurement of acceptance and tensile strength of coatings and finishes using pressure-sensitive tapes