Our company has established a wide range of testing and analysis services with the structure of the following Fasteners Bolts, Screws, Deviations to all standards, testing, inspection and inspection services.
TS EN 2885 Aviation series-Bolts-Cylinder-headed, with rounded edges, positive-groove, coarse tolerance normal body, short screw, alloy steel, cadmium plated-Classification: 900 MPa (at ambient temperature) / 235 ° C
TS EN 2886 Aviation series-Bolts, cylindrical head, with rounded edges off the housing axis, with short tolerance, normal body, short screw, made of alloy steel, cadmium plated-Classification: 900 mpa (at ambient temperature) / 235 ° c
TS EN 3035 Aviation series - Bolts, 100 ° countersunk with normal head - with rounded edges offset from the axis of the housing - Short tolerance normal body, short thread - Alloy steel - Cadmium plated - Classification 1100 mpa at ambient temperature / 235 ° c
TS EN 2925 Aviation series-Bolts made of fe-Pa92ht (a286) with double hexagonal head, tapered body, long screw, heat-resistant steel-Classification: 900 mpa (at ambient temperature) / 650 ° c
TS EN 3007 Aviation series-Bolts, hexagon head, thinned body, long screw, made of fe-Pa92ht (a286), heat-resistant steel, silver-plated -Classification: 900 mpa (at ambient temperature) / 650 ° c
TS EN 3013 Aviation series-Nuts, double hexagonal, self-locking, made of nickel-based alloy nickel-plated P101ht (waspaloy), silver plated-Classification: 1210 mpa (at ambient temperature) / 730 ° c
TS EN 2939 Aviation series-Bolts made of fe-Pa100 ht (a 92) made of heat-resistant steel, screwed up to the head, with 286 ° countersunk normal head, edges offset from the housing axis. 900 MPa (at ambient temperature) / 650 ° C
TS EN 2364 Aerospace series - Low tolerance pins with headers
TS EN 2583 Aviation series-Bolts, mj screws-Heat-resistant nickel-based Ni-Ph 2601 (Inconel 718) alloys-Classification: 1275 MPA (at ambient temperature) / 650 ° c-Technical specification
TS EN 2236 Aviation series-Pins-Head bolts-Narrow-tolerance shaft-Alloy steel-Technical specification
TS EN 3037 Aviation series-Bolts, cylindrical head, with rounded edges off the axis of the housing plus a short-cut, normal body, short-screw, made of titanium alloy, anodized, lubricated with mos2-Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 3303 Aviation series - Bolts, cylindrical head, hexagon housing, coarse tolerance, normal body, medium length thread, alloy steel and cadmium plated - Classification: 1100mpa (at ambient temperature) / 235 ° c
TS EN 3008 Aviation series - Bolts, hex head, lightened body, long teeth, heat-resistant nickel-based alloy nı-P100ht (inconel718) - Classification: 1275mla (at ambient temperature) / 650c
TS EN 3010 Aviation series - Bolts, hex head, lightened body, long teeth, heat resistant nickel base alloy nı-P101ht (waspalay) - Classification: 1210 mla (at ambient temperature) / 730 grad c
TS EN 2364 Aviation series - Pins, thin head, narrow tolerance
TS EN 2874 Aviation series - Bolts, wide twelve corners, narrow tolerance normal body, medium length thread, made of heat-resistant nickel-based alloy, passivated - Classification: 1550 mpa (at ambient temperature) / 315 ° c
TS EN 2926 Aviation series - Bolts, double hexagon head, tapered body, long screw, made of heat-resistant steel FE-PA92ht (A286), silver-plated - Classification: 900 MPa (at ambient temperature) / 650 ° C
TS EN 2928 Aviation series - Bolts, double hexagonal head, thinned body, long screw thread, heat resistant, made of nickel based alloy, NI-P100HT (inconel 718), silver plated- Classification: 1 275 MPa (at ambient temperature) / 650 ° C
TS EN 2931 Aviation series- Bolts with t-head, tapered body, long thread, heat-resistant, made of steel fe-Pa92ht (a286) - Classification: 900 mpa (at ambient temperature) / 650 ° c
TS EN 2932 Aviation series - Bolts with t-head, tapered body, long thread, heat-resistant, made of silver-plated steel, fe-Pa92ht (a286) - Classification: 900 mpa (ambient temperature) / 650 ° c
TS EN 3270 Aviation series-Titanium alloy pipe connectors 8 ° 30-Hollow plugs with locking ring
TS EN 3724 Aviation series-Bolts, double-headed, tapered body, long screw, titanium alloy tI-P64001imal, coated with mos2- Classification: 1100 mpa (at ambient temperature)
TS EN 3725 Aviation series-Bolts, with truncated cone head, six lobe housings, normal body, long screw, tI-P64001imal, titanium alloy coated, mos2 coated- Classification: 1100 mpa (at ambient temperature)
TS EN 3818 Aerospace series - Mj screw bolts, made of titanium alloy ti-P64001 - Classification: 1100 mpa (at ambient temperature) - Technical specifications
TS EN 3833 Aviation series-Mj screw bolts, made of heat-resistant nickel-based alloy nI-Ph2601 (inconel 718) - Classification: 1550 mpa (at ambient temperature) / 650 ° c - Technical specifications
TS EN 4009 Aviation series-Bolts, double hexagon head, narrow tolerance body, medium-length screw, made of heat-resistant nickel-based alloy nI-P100ht (inconel 718) - Classification: 1550 mpa (at ambient temperature) / 650 ° c
TS EN 4321 Aviation series-Bolts, double hexagonal head with lock holes, lightweight body, long screw thread, made of heat-resistant nickel-based alloy nI-Ph2601 (inconel 718), silver-plated - Classification: 1550 mpa (at ambient temperature) / 650 C
TS EN 4322 Aviation series-Bolts, double hexagon head, with safety wire hole, thinned body, long screw, made of titanium alloy tI-P64001, anodised, coated with mos2 - Strength class: 100 mpa
TS EN 4323 Aviation series-Bolts, 100 ° countersunk head, with six logs, up to the head screw, made of alloy tI-P64001, coated anodised, mos2 - Classification: 900 mpa (at ambient temperature) / 350 ° c
TS EN 4352 Aviation series-Bolts, double hexagon head, safety wire hole, thinned body, long screw, heat resistant nickel-based alloy nI-Ph 2601 (manufactured inconel 718), mos2 coated - Classification: 1550 mpa (at ambient temperature) / 425 ° C
TS EN 2859 Aviation series - Bolts, normal hex head, narrow tolerance normal body, short thread, made of steel alloy, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4402 Aviation series - Locked bolts, 100 ° countersunk normal head, shear strength type, tight tolerances, made of titanium alloy tI-P64001, coated with colored aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 2549 Aviation series-Anodic oxidation, lubricated with mos2, normal hexagon head, tight tolerance, normal body, short threaded bolts with alloy titanium-Classification: 1100 mpa (at ambient temperature / 315 ° c)
TS EN 3293 Aviation series - Bolts, t-head, tight tolerance, medium screw length, heat-resistant nickel-plated alloy made of nI-P100ht (inconel 718), uncoated - Classification: 1275 mpa / 650 ° c
TS EN 3302 Aviation series - Bolts made of heat-resistant steel fe-Pm1708 (fv535) - Classification: 1000 mpa / 550 ° c - Technical specifications
TS EN 3326 Aviation series - Bolts, d-head, tight tolerance, medium thread length, made of heat-resistant nickel-based alloy nI-Ph2601 (inco 718) - Classification: 1275 mpa / 650 ° c, uncoated
TS EN 3328 Aviation series - Screws, double sided hexagon head, tight tolerance, medium thread length, made of heat-resistant steel fe-Pm38 (fv535), uncoated - Classification: 1000 mpa / 550 ° c
TS EN 3368 Aviation series - Aviation design standard - Holes for mounting pins
TS EN 3685 Aviation series - Bolts made of heat-resistant steel fe-Pa2601 (a286) - Classification: 1100 mpa / 650 ° c - Technical specifications
TS EN 3905 Aviation series - Hexagonal wrenches for bolts - Technical specifications
TS EN 3323 Aviation series - Double hexagon head bolts, long thread with unthreaded housing - Made of heat-resistant steel fe-Pm 38 (fv 535) - Classification: 1000 mpa / 550 ° c
TS EN 4071 Aviation series - Bolts with normal hex head, close-tolerant, unshielded, short-length thread, titanium alloy, aluminum kapvid coating - Classification: 1100 mpa (at ambient temperature) / 425 ° C
TS EN 4127 Aviation series - Bolts, normal hex head, coarse tolerant, unshielded body, short length thread, titanium alloy, aluminum kapvid coating - Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 4129 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded, medium length thread, made of alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 ° C
TS EN 4634 Bolts, made of fe-Pa100 (a2601), with 286 ° countersunk head, six log, short screw, heat-resistant steel -Classification: 900 mpa (at ambient temperature) / 650 ° c
TS EN 4163 Aviation series-Bolts, 100 ° with countersunk head, loosened from the axis of the housing, coarse tolerance normal body, long thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4138 Aviation series- Screws, flat head, cross-shaped housing, coarse tolerance normal body, medium length thread, made of steel alloy, cadmium-plated-Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 3777 Aerospace series - Pins, quick release, single and double running - Specifications
TS EN 4136 / AC Aviation series - Bolts, double hexagon head, coarse tolerant thread, long thread, steel alloy, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN ISO 4498 Sintered metal materials (excluding hard metals) - Determination of apparent hardness and microhardness
TS EN 2549 Aviation series - Bolts, hexagon head, narrow tolerance normal body, short screw, made of titanium alloy, anodized, lubricated with mos2 - Classification: 1 100 mpa (at ambient temperature) / 315 ºc
TS EN 2859 Aviation series - Bolts, hexagon head, tight tolerant body, short thread, made of alloy steel, cadmium plated, metric series - Classification: 1100 mpa (at ambient temperature) / 235 0 c
TS EN 2888 Aviation series - Bolts made of corrosion-resistant steel with short hexagonal head, coarse tolerance, normal thread, passivated-Classification: 600 mpa (at ambient temperature) / 425 ° c
TS EN 3008 Aviation series - Bolts, hexagonal head, lightweight body, long toothed, heat resistant nickel based alloy nı-P100ht (inconel 718) - Classification: 1275mpa (at ambient temperature) / 650 oc
TS EN 3010 Aviation series-Bolts, hexagonal head, lightweight body, long teeth, heat-resistant nickel-based alloy nI-made of P101ht (waspaloy) -Classification: 1210 mpa (at ambient temperature) / 730 c
TS EN 3293 Aviation series - Bolts - T-head, tight tolerant, medium screw length, heat-resistant nickel-based alloy made of nI-P100ht (inconel 718), without coating - Classification: 1 275 mpa / 650 ºc
TS EN 3301 "aviation series - Bolts, t-head, tight tolerance, medium thread length, made of heat-resistant fe-Pm1708 (fv535) steel, uncoated - Classification: 1000 mpa / 550 ° c"
TS EN 3302 Aviation series - Bolts made of heat-resistant steel fe-Pm1708 (fv535) - Classification: 1000 mpa / 550 ° c - Technical specifications
TS EN 3323 Aviation series - Double hexagon head bolts made of fe-Pm 38 (fv 535) with thinned body, long screw, temperature resistant steel - Classification: 1 000 mpa / 550 ºc
TS EN 3324 Aviation series - Bolts, hexagon head, hollow body, long thread, made of heat-resistant fe-Pm1708 (fv535) steel - Classification: 1000 mpa / 550 oc - Uncoated
TS EN 3327 Aviation series - Bolts, double sided hexagon head, tight tolerance, medium thread length, made of heat-resistant nickel-based alloy ni-Ph100ht (inconel 718), uncoated - Classification: 1275 mpa / 650 ° c
TS EN ISO 3035 Corrugated cardboard - Determination of surface crush strength
TS EN 3707: 2012 (EN) Aviation series - Headless threaded plugs - Inserting holes
TS EN 3706: 2012 Aviation series - Headless threaded plugs, cross-recessed, made of aluminum alloy 5086
TS EN 3052 Aviation series-Bolts, hexagon head, narrow tolerance normal body, short screw, made of heat and corrosion resistant steel, passivated-Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 2930 Aviation series-Bolts, double hexagonal head, free body, long screw thread, heat-resistant nickel-based alloy nI-P101ht (waspaloy), silver plated-Classification: 1210 mpa (ambient temperature) / 730 ° c
TS EN 6129 Aviation Series - Blind Rivet, High Strength, Pull Type
TS EN 6105 Aviation Series - Nail Stud
TS EN 4072 / AC Aerospace series - Screws, 100 ° with normal countersunk head, with rounded edges, plus tolerant housing, tight tolerant body, short titanium alloy thread, IVD coated - Classification: 1 100 Mpa (at ambient temperature) / 425 ° C
TS EN 6129 / AC Aviation series - Blind rivet, protruding head, high strength, pull type
TS EN 2044 Aviation series - Round bars - Extruded from aluminum and aluminum alloys - Tolerance class h 11 - diameter 4 mm? D ? 63 mm - Dimensions
TS EN 2236 Aviation series - Pins, head, body with tight tolerance, made of alloy steel - Technical specifications
TS EN 2413 Aviation series-Cadmium plated, alloy steel, thin hex head, tight tolerant body, short threaded bolts-Classification: 1100 mpa (at ambient temperature / 235 ° c)
TS EN 2583 Aviation series bolts - Mj threaded, heat resistant nickel based alloy - Made of Ph 2601 (inconel 718) - Classification 1275 mpa (at ambient temperature) / 650 oc - Technical specifications
TS EN 2606 Aviation series - 60 ° interface for adapters, locking, threaded - Geometric configuration
TS EN 2649 Aviation series - Cadmium-plated, alloy steel, screw-to-head, grooved, flat head screws classification: 900 mpa (at ambient temperature) / 235 ° c
TS EN 2650 Aerospace series-Passivated, corrosion-resistant steel, with threaded head, flat head screws - Classification: 600 mpa (at ambient temperature) / 425 ° c
TS EN 2652 Aviation series - Screws, 100 embedded normal head, split, cadmium plated steel alloy head gear - Classification 900 mla (at ambient temperature) 235c
TS EN 2653 Aviation series-Passivated, corrosion-resistant steel, up-to-screw, threaded, 100 degree countersunk normal head screws-Classification: 600 mpa (at ambient temperature) / 425 ° c
TS EN 2654 Aviation series-Solid brass tin-plated, screw-in head, self-tapping, 100 degree countersunk normal head screws-Classification: 380 mpa (at ambient temperature) / 80 ° c
TS EN 2884 Aviation series-Bolts, cylindrical head, with rounded edges off the axis of the housing, with a coarse tolerance normal body, short screw, made of titanium alloy, made of anodic coating, lubricated with mos2-Classification: 1100 mpa (at ambient temperature) / 315 C
TS EN 2889 Aerospace series - Bolts with normal hexagon head, coarse tolerance, normal body, short threaded alloy steel, cadmium plated - Classification: 900 mpa (ambient temperature) / 235 ° c
TS EN 2927 Aviation series - Bolts, double hexagon head, thinned body, long screw, made of heat-resistant nickel-based alloy - Made of P100ht (inconel 718) - Classification: 1275 mpa (at ambient temperature) / 650 ° c
TS EN 2929 Aviation series - Bolts, hexagon head, free body, long thread, made of heat-resistant nickel-based alloy (nı-P-101ht), classification: 1210 mpa (ambient temperature) / 730 ° c
TS EN 2930 Aviation series - Bolts, double hexagon head, thinned body, long screw thread, heat-resistant, made of nickel-based alloy (nı-P-101ht, waspaloy), silver plated- Classification: 1210 mpa (at ambient temperature) / 730 ° c
TS EN 2933 Aviation series- Bolts with t-head, tapered body, long thread, heat-resistant, made of nickel-based alloy, nı-P100ht (inconel 718) - Classification: 1 275 mpa (at ambient temperature) / 650 ° c
TS EN 2934 Aviation series - Bolts with t-head, thinned body, long thread, made of heat-resistant nickel-based nI-P100ht (inconel 718) alloy, silver plated classification: 1275 mpa (at ambient temperature) / 650 ° c
TS EN 2935 Aviation series - Bolts with t-head, tapered body, long thread, heat-resistant, made of nickel-based alloy, nI-P101ht (waspaloy) - Classification: 1 210 mpa (at ambient temperature) / 730 ° c
TS EN 2936 Aviation series - Bolts with t-head, thinned body, long thread, made of heat-resistant nickel-based alloy, silver plated (nı-P101ht waspaloy) - Classification: 1210 mpa (at ambient temperature) / 730 ° c
TS EN 2937 Aviation series-Bolts, hexagon head, screw-up, made of heat-resistant steel fe-Pa92 ht (a286) -Classification: 900 mpa (at ambient temperature) / 650 ° c
TS EN 2938 Aviation series-Bolts, hexagon head screwed up, head made of heat-resistant steel, fe-Pa 92 ht (a286)-Silver plated-Classification: 900 mpa (at ambient temperature) / 650 ° c
TS EN 2940 Aviation series-Bolts, 100 ° with countersunk head, screwed up to the head axis, screwed up to the head, made of heat-resistant steel fe-Pa92 ht (a286), silver-plated-Classification: 900 mpa (at ambient temperature) / 650 ° c
TS EN 3009 Aviation series - Bolts, hex head, lightweight housing, long teeth, heat-resistant nickel-based alloy nI-P100ht (inconel718), silver-plated- Classification: 1275 (at ambient temperature) / 650c
TS EN 3011 Aviation series - Bolts, hexagonal head, lightweight housing, long teeth, heat resistant nickel-based alloy nI-P101ht (waspalay), silver plated- Classification: 1210mla (at ambient temperature) / 730 c
TS EN 3038 Aviation series-Bolts made of tempered and corrosion-resistant steel with cylindrical head, with narrow edges, normal body, short screw, passivated, with low tolerance, Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 3063 Aviation series-Bolts, double hexagon head, close tolerance body, medium length thread, heat-resistant nickel-based alloy nI-Made of P101 ht (waspaloy) -Classification: 1210 mpa (at ambient temperature) / 730 ° c
TS EN 3112 Aviation series-Bolts, hexagon head, threaded, steel alloy, cadmium plated-Classification: 900 mpa (at ambient temperature) / 235 ° c
TS EN 3294 Aviation series - Bolts, t-head, tight tolerance, made of heat-resistant nickel-plated alloy nI-P100ht (vaspaloy), uncoated for nuts with increased height - Classification: 1210 mpa / 730 ° c
TS EN 3304 Aviation series-Bolts, 100 * with countersunk head with slanted head, fringed edges, normal tolerance, short thread, titanium alloy, anodized, mos2 lubricated-Classification: 1100 mpa (at ambient temperature) / 315 * c
TS EN 3305 Aviation series-Bolts, 100 * with countersunk head with slanted head, frayed edges, normal housing, short thread, alloy steel and cadmium plated-Classification: 1100 mpa (at ambient temperature) / 235 0c
TS EN 3306 Aviation series - Bolts, 100 ° countersunk normal head, with edges offset from the slot axis in the shape of a cross, threaded up to the bolt head, titanium alloy anodized, mos <2> lubricated - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 3307 Aviation series - Bolts, flat head, cross-slotted edges off the slot axis, threaded up to the bolt head, titanium alloy, anodized, mos <2> oiled - Classification: 1100mpa (at ambient temperature) / 315 ° c
TS EN 3308 Aviation series - Bolts, cylindrical head, hexagon socket, coarse tolerance, normal body, medium length thread, alloy steel and cadmium plated - Classification: 1100 mpa (at ambient temperature) ° c
TS EN 3325 Aviation series - Bolts with t-head, hollow body, long thread, made of heat-resistant steel fe-Pm1708 (fv535) - Classification: 1000 mpa / 550 ° c - Uncoated
TS EN 3379 Aviation series-Bolts, with twelve corners, narrow tolerance normal body, medium length thread, made of heat-resistant nickel-based alloy, for height-increased nuts-Classification: 1210 mpa (at ambient temperature) / 730 ° c) / 730 C
TS EN 3388 Aviation series - Fasteners made of externally threaded, heat-resistant nickel-based alloy nI-Ph2601 (inconel 718) - Classification 1275 mpa / 650 ° c - Optional manufacturing method - Technical specifications
TS EN 3613 Aviation series - Screws, with normal hex head, coarse tolerant, unshielded, long thread, nickel-based alloy nI-Ph2601 (inconel 718), made of steel, silver plated - Classification: 1275 mpa / 650 ° c
TS EN 3614 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, long thread, made of alloy steel, fe-Pa2601 (a286), silver plated - Classification: 900 mpa / 650 ° c
TS EN 3636 Aviation series - Screws, small flat head, cross-shaped housing, hollow body, long thread, heat-resistant steel fe-Pa92ht (a286), silver-plated - Classification: 900 mpa / 650 ° c
TS EN 3685 Aviation bolts, heat-resistant steel fe - Made of Pa2601 (a286) - Classification 1100 mpa / 650 oc - Technical specifications
TS EN 3686 Aviation series - Bolts, hexagonal on both sides, hollow body, long thread, made of heat-resistant steel fe-Pa92ht (a286), silver-plated - Classification: 1100 mpa / 650 ° c
TS EN 3686 / AC Aviation series - Bolts, hexagonal head on both sides, long thread, made of heat-resistant steel fe-Pa92ht (a286), silver plated - Classification: 1 100 mpa / 650 ° c
TS EN 3687: 2010 Aviation series - Bolts with hexagon head, thinned body, long teeth, heat-resistant steel fe-Pa92ht (a286), silver plated-Classification: 1100 mpa / 650 ° c
TS EN 3740 Aviation series-Bolts, shoulder, hexagon head, narrow tolerance normal body, short thread, made of titanium alloy, anodized, lubricated with mos2-Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 3759 Aviation-Screws-Flat head, cross-turning, threaded, heat and rust resistant steel, passivated-Class: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 3760 Aerospace series - Bolts, 100 ° with countersunk head, offset from the housing axis, screwed up to the head, made of heat and corrosion resistant steel, passivated-Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 3832 Aviation series-Bolts made of nickel-based alloy nI-P100ht (inconel718) with double headed, thinned body, long screw and long screw - Classification: 1550 mpa (at ambient temperature) / 650 ° c
TS EN 3907 Aviation series-Bolts, double hexagon head, normal body, long screw, made of titanium alloy tI-P64001, coated with mos2 - Classification: 1100 mpa (at ambient temperature) / 350 ° c
TS EN 3912 Aviation series - Bolts, flat head, hexagon, free end, made of heat-resistant fe-Pa2601 (fe-Pa92ht, a286), silver-plated - Classification 110 mpa (at ambient temperature) / 650 ° c
TS EN 4009 Aviation series - NI-Ph2601 (inconel 718) - Bolts, double hexagon head, tightly tolerant body, medium in screw size, heat resistant nickel based alloy - Classification: 1550 mpa (at ambient temperature) / 650 ° c
TS EN 4072 Aviation series - Screws, 100 ° with countersunk head, cruciform printed, tight tolerant normal body, short thread, made of titanium alloy, coated with aluminum coloring - Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 4073 Aviation series-Bolts, cylinder head, six-lobe housing, coarse tolerance normal body, medium length thread, made of steel alloy, cadmium-plated-Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4074 Aviation series - Screws, bump head, six log, coarse tolerant normal body, medium length thread, in titanium alloy, coated with aluminum coloring - Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 4075 Aviation series - Screws, flat head, cross-shaped housing, screwed up to the head, made of heat-resistant steel, - Classification: 490 mpa (at ambient temperature) / 425 ° c
TS EN 4128 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, short length thread, heat-resistant nickel-based alloy, aluminum iv coated - Classification: 1100 mpa (at ambient temperature)
TS EN 4129 / AC Aerospace series - Bolts, normal hex head, coarse tolerant thread, medium length thread, made of alloy steel, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4130 Aviation series - Bolts, normal hex head, coarse tolerant thread with unshielded body, medium length thread, made of titanium alloy, with aluminum rw coating - Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 4130 / AC Aviation series - Bolts, normal hex head, coarse tolerant thread, unshielded body, medium length thread, made of titanium alloy, with aluminum iv coated - Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 4131 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded, medium-length thread, made of heat-resistant nickel-based alloy, with aluminum iv coating - Classification: 1250 mpa (at ambient temperature) / 425 ° c
TS EN 4132 Aviation series - Bolts, normal hex head, coarse tolerant unshielded body, short tooth, made of heat-resistant nickel alloy, with aluminum ell coating - Classification: 1250 mpa (at ambient temperature) / 425 ° c
TS EN 4133 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, long thread, made of titanium alloy, with aluminum ell coating - Classification: 1100 mpa (at ambient temperature) / 425 ° c
TS EN 4134 Aviation series - Bolts, normal hex head, coarse tolerant thread unshielded body, long thread, made of heat-resistant nickel-based alloy, with aluminum rw coating - Classification: 1250 mpa (at ambient temperature) / 425 ° c
TS EN 4135 Aviation series - Bolts, double hexagonal head, coarse tolerant thread unshielded, medium length thread, made of titanium alloy, anodized, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 4136 Aviation series - Bolts, double hexagonal head, coarse tolerant thread, long thread, steel alloy, cadmium plated - Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4137 Aviation series - Bolts, double hexagonal head, coarse tolerant thread unshielded body, long thread, made of titanium alloy, anodized, lubricated with mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 4161 Aviation series-Bolts, cylindrical head, edges off the housing axis, normal tolerances, coarse tolerance, long thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4161 / AC Aviation series-Bolts, cylindrical head, edges off the housing axis, normal tolerance with coarse thread, long thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4162 Aviation series-Bolts, 100 ° with countersunk head, loosened from the housing axis, rough tolerance normal body, medium length thread, made of steel alloy, coated with cadmium-Classification: 1100 mpa (at ambient temperature) / 235 ° c
TS EN 4176 Aviation series - Lock bolts, 100 ° countersunk normal head or wide head, cut / bend resistant type, tight tolerant, made of titanium alloy ti-P64001, coated with anodized or painted aluminum - Titianium ti-P99002 made of stainless steel or aluminum alloy 2024 - Metric series - Technical specifications
TS EN 4311 Aviation series - Nails, coarse tolerant, reduced body, with average length thread, made of heat and corrosion resistant steel, lubricated mos2 - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 4312 Aerospace series - Nails, coarse tolerant, reduced body, with average length threads, made of heat and corrosion resistant steel, colored aluminum coated - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 4458 Aviation series - Studs, mj screws, Ti-P64001 titanium alloy, mos2 coated, notched locking ring made of corrosion-resistant steel - Strength class: 1100 mpa (at ambient temperature) - Technical specifications
TS EN 4459 Aviation series - Studs, mj screws, Ti-P64001 titanium alloy, with notched locking ring made of corrosion-resistant steel - Design standard
TS EN 4460 Aviation series - Studs, mj screws, t-P64001 titanium alloy, corrosion-resistant steel with notched locking ring - Installation and removal
TS EN 4495 Aviation series - Bolts, normal hexagon head, tight tolerant normal body, short length thread, made of titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 4496 / AC Aviation series - Screws, 100 ° countersunk normal head, pre-shaped cruciform printed, tight tolerant normal body, made of titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 4496 Aviation series - Screws, 100 ° countersunk normal head, pre-shaped cruciform printed, tight tolerant normal body, made of titanium alloy, anodized, color coated aluminum, metric series - Classification: 1100 mpa (at ambient temperature) / 315 C
TS EN 4497 Aviation series - Screws, flat head, flat head, pre-shaped cruciform printed, tight tolerance normal body, short screw thread, made of titanium alloy, anodized, colored aluminum coating - Classification: 1100 mpa (at ambient temperature) / 315 ° c
TS EN 4498 Aviation series - Bolts, large hexagonal head, tight tolerance normal body, medium length thread, made of heat resistant nickel based alloy, chemically passivated, colored aluminum coated - Classification: 1550 mpa (at ambient temperature) / 315 ° c