• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Wires Standards

Wires standards within the scope of Electrical Insulation tests are given below. All the standards mentioned below are tested, inspected and inspected by us and we provide fast and reliable certification services based on customer satisfaction.

 

TS EN 60264-2-2 Packing of winding wires section 2: cylindrical rollers part 2: returnable rollers made of thermoplastic material  

TS EN 60264-2-1 Packing of winding wires section 2: Cylindrical rollers section 1: Basic dimensions

TS EN 60264-2-3 Packing of winding wires section 2: Cylindrical rollers part 3: Specification for non-returnable rollers made of thermoplastic material

TS EN 60264-3-3 Packing of winding wires section 3: Tapered rollers part 3: Specification for non-returnable reels made of thermoplastic material

TS EN 50186-2 Washing systems under voltage - for power plants with rated voltages above 1kv - Part 1: Common requirements

TS EN 50182 Air line conductors - Round stranded concentric stranded stranded conductors

TS EN 60264-3-2 Winding wires - Packaging - Part 3-2: Delivery rollers - Conical - Specification for returnable rollers made of thermoplastic material

TS EN 60264-2-2 / A1 Packing of winding wires - Part 2: Cylindrical rollers - Part 2: Returnable rollers made of thermoplastic material (modification 1)

TS EN 60264-2-3 / A1 Packing of winding wires - Part 2: Cylindrical rollers part 3: Specification for non-returnable rollers made of thermoplastic material

TS EN 60851-2 Winding wires - Test methods - Part 2: Determination of dimensions

TS EN 60317-18 / A1 Winding wires - Specification for specific types - Part 18: Polyvinyl acetal enamelled rectangular copper wire, 120 class

TS EN 60317-22 / A1 Winding wires - Specification for certain types - Part 22: Round cross-section copper wire with polyamide enamels on polyester or polyesterimide, 180 class

TS EN 60851-2 Winding wires - Test methods part 2: Determination of dimensions

TS EN 60851-1 / A2 Winding wires - Test methods section 1: General

TS EN 60317-13 Winding wires - Specification - Part 13: Polyamide - imide coated polyester or polyesterimide enamelled round copper wire, 200 class

TS EN 60317-25 Winding wires - Part 25: Polyamide / imide coated polyester or polyesterimide enamelled round aluminum wire, 200 class

TS EN 60317-44 / A1 Winding wires - Specifications - Part 44: Rectangular copper wire wrapped with aromatic polyamide ribbon, 240 class

TS EN 60317-43 / A1 Winding wires - Specifications - Part 43: Round copper wire wrapped around aromatic polyamide strip, 240 class

TS EN 60317-42 / A1 Winding wires - Specification - Part 42: Polyester - Amide- Imid enamelled round copper wire, 200 class

TS EN 60317-15 / A1 Winding wires - Specification for specific types - Part 15: Polyesterimide enamelled round aluminum wire, 180 class

TS EN 60317-29 / A2 Winding wires - Part 29-Polyamide-Imide coated polyester or polyesterimide enamelled rectangular copper winding wire 200 class

TS EN 60317-58 Winding wires - Specification for specific types - Part 58: Rectangular copper wire with polyamide-imide coated, class 

TS EN 60317-57 Winding wires - Specification for specific types - Part 57: Polyamide-Imide coated round copper wire, class 

TS EN 60851-3 Winding wires - Test methods part 3: Mechanical properties

TS EN 60317-57 Winding wires - Specification for specific types - part 57: Polyamide-Imid enamelled round copper wire, 

TS EN 60317-58 Winding wires - Specification for certain types - Part 58 - Polyamide-Imid enamel coated rectangular copper wire, 220 class

TS EN 60228 Conductors for insulated cables

TS EN 60332-1-1 Electrical and optical fiber cable tests at risk of fire - Part 1-1: Vertical flame propagation test for insulating single wire and fiber cable - Apparatus

TS EN 60332-1-2 Tests for electrical and optical fiber cables at risk of fire - Part 1-2: Vertical flame propagation test for insulating single wires and fiber cables

TS EN 60332-1-3 Fire and electrical fiber optic cable tests - Part 1-3: Vertical flame propagation test for insulating single wire and fiber cable

TS EN 60332-2-1 Tests for electrical and optical fiber cables at risk of fire - Part 2-1: Vertical flame propagation test for insulating small single copper wire and fiber cable - Apparatus

TS EN 60332-2-2 Electrical and optical fiber cable tests at risk of fire - Part 2-2: Vertical flame propagation test for insulating small single wire and fiber cable - Procedure for spreading flame

TS EN 60799 Electrical auxiliary equipment - Lanyard sets and interconnected lanyard sets

TS EN 50395 Cables - Electrical test methods - for low voltage power cables

TS EN 50396 Cables - Non-electrical test methods - For low voltage power cables

TS EN 61034-1 Measurement of smoke density of burning cables under specified conditions - Part 1: Test equipment

TS EN 61034-2 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules

TS EN 60228 Cables - Conductors of insulated cables

TS EN 50395 Cables - Low voltage power cables - Electrical test methods

TS EN 50396 Cables - Low voltage power cables - Non-electrical test methods

TS EN 61034-1 Measurement of smoke density of burning cables under specified conditions - Part 1: Test device

TS EN 61034-2 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules

TS EN 60332-2-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-2: Vertical flame propagation test for a single insulated small wire or cable - Process for diffusion flame

TS EN 60332-2-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-1: Vertical flame propagation test for a single insulated small wire or cable - Equipment

TS EN 60332-1-3 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Process for the determination of flame droplets / particles

TS EN 60332-1-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame

TS EN 60332-1-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-1: Vertical flame propagation test for a single insulated wire or cable - Equipment

TS EN 50214 Cables - flexible cables for elevators

TS EN 61138 Cables - for portable earthing and short-circuit equipment

TS EN 61138 Cables - For portable earthing and short-circuit devices

TS EN 62230 Cables - Test methods for sparks

TS EN 50214 Cables - Polyvinyl chloride sheathed - Flat, flexible

TS EN 50264-3-1 Railway applications-Power and control cables of special fire performance railway vehicles-Section 3: Reduced cross section and cross-linked elastomeric insulation-Single core cables "

TS EN 50382-1 Railway applications - Railway rail high temperature power cables requirements have special fire performance - Part 1: General

TS EN 50382-2 Railway applications - Railway railway high temperature power cables special fire performance - Part 2: Insulated 120 ° c or 150 ° c cables with single core silicone rubber

TS EN 60332-3-10 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame propagation of vertically mounted bundled wires or cables - Hardware

TS EN 60332-3-21 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-21: Test for vertical flame spread of bundled wires or cables vertically mounted - Category af / r

TS EN 60332-3-22 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-22: Vertical flame spread test of bundled wires or cables vertically - Category a

TS EN 60332-3-23 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flammability of vertically mounted bundled wires or cables - Category b

TS EN 60332-3-25 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-25: Vertical flame propagation test of bundled wires or cables vertically mounted - Category d

TS EN 60332-3-24 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-24: Vertical flame propagation test of bundled wires or cables vertically mounted - Category c

TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables vertically mounted - Equipment

TS EN 60332-3-21 Cables - Tests in electrical and fiber optic cables under fire conditions - Part 3-21: Test for vertical flame spread of bundled wires or cables vertically mounted - Category af / r

TS EN 60332-3-23 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flame spread of bundled wires or cables vertically mounted - Category b

TS EN 60332-3-24 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame spread of bundled wires or cables vertically mounted - Category c

TS EN 60332-3-25 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame spread of bundled wires or cables vertically mounted - Category d

TS EN 60708 Low frequency cables - Polyolefin insulated and moisture-proof polyolefin sheath

TS EN 60332-3-22 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-22: Test for vertical flame spread of bundled wires or cables vertically mounted - Category a

TS EN 50395 / A1 Cables - Electrical test methods - For low voltage power cables

TS EN 50396 / A1 Cables - Non-electrical test methods - For low voltage power cables

TS EN 50214 / AC Cables - Polyvinyl chloride sheathed - Flat, flexible

TS EN 50085-2-4 Equipped cable tray systems and cable tray systems - Part for electrical installations-2-4: Related specifications-For service poles and service brackets

TS EN 60229 Electrical cables - Tests on extruded outer sheaths with special protective function

TS EN 50395: 2005 / A1: 2011 Cables - Electrical test methods - For low voltage power cables

TS EN 50396: 2005 / A1: 2011Cables - Electrical test methods - For low voltage power cables

50525-2-83: 2011 Cables - Cross-linked rubber insulation - Part 450 / 750 v with rated voltage at most - 15: Multi-core cables with heat-resistant silicone rubber insulation and sheathing

TS EN 50525-2-82: 2011 Cables - Rubber insulated part with maximum rated stress 450 / 750 v 8: Polychloroprene or equivalent synthetic elastomer sheath for decorative chains

TS EN 50525-2-81: 2011 cables - rubber insulated - rated voltage up to 450 / 750 v - Part 6: Arc welding cables

TS EN 50525-2-42 Cables - Rubber insulated - 450 / 750 with rated voltage at most Part 7: Cables with increased heat resistance for internal connections with conductor temperature 110 C

50525-2-22: 2011 Cables - Cross-linked insulation - Part with rated voltage up to 450 / 750 v 14: Cords for applications requiring high flexibility

TS EN 50525-2-21 Electrical cables - Low-voltage power cables with rated voltage up to and including 450 / 750 v- Part 2-21-Cables for general applications -Crosslinked elastomeric insulated flexible cables

50525-2-41: 2011 Cables - Cross-linked insulated - Maximum rated voltage 450 / 750 v - Part 3: Heat-resistant silicone rubber insulated cables

TS EN 50399 Common test methods for cables in fire environments - Measurement of smoke formation and heat output on cables during flame splash test - Test equipment, procedures, results

TS EN 50525-3-31: 2011 Electrical cables - Low-voltage power cables with rated voltage up to and including 450 / 750 v- Part 3-31-Special fire performance cables-Halogen-free thermoplastic insulated and unshielded cable

50525-3-11: 2011 Electrical cables - Low voltage power cables with rated voltage up to and including 450 / 750 v - Part 3-11-Special fire performance cables - Halogen-free thermoplastic insulated and low smoke emission flexible cables

TS EN 50525-1: 2011 Power cables - Low voltage power cables with rated voltage up to and including 450 / 750 v - Part 1: General specifications

TS EN 50525-2-31 Electrical cables - Low voltage power cables with rated voltage up to and including 450 / 750 v - Part 2-31: Cables for general applications - Single core sheathed cables with thermoplastic pvc insulation

TS EN 50525-2-11: 2011 Electrical cables - Low-voltage power cables with rated voltage up to and including 450 / 750 v- Part 2-11-Cables for general applications-Thermoplastic pvc insulated flexible cables (cords)

TS EN 50525-2-12 Electrical cables - Low-voltage power cables with rated voltage up to and including 450 / 750 v - Part 2-12-Cables for general applications-Thermoplastic insulated cables for extendable leads

TS EN 50525-2-72: 2011 Electrical cables - Low voltage power cables with rated voltage up to and including 450 / 750 v - Part 2-72-Cables for general applications - Thermoplastic PVC insulated flat detachable cables (cords)

TS EN 50525-2-51: 2011 Electrical cables - Low-voltage power cables with rated voltage up to and including 450 / 750 v - Part 2-51-Cables for general applications - Thermoplastic PVC insulated oil resistant control cables

TS EN 50525-1 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 v (u0 / u) - Part 1: General specifications

TS EN 50525-3-41 Electrical cables - Low voltage power cables with rated voltage up to and including 450 / 750 v - Part 3-41: Special fire performance cables - Halogen-free and unshielded single-core cables with low smoke emission

TS EN 50525-3-21 Electrical cables - Low voltage power cables with rated voltage up to and including 450 / 750 v - Part 3-11-Special fire performance cables-Halogen-free cross-linked flexible cables with low smoke emissions

TS EN 1127-1 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

TS EN 50525-2-21 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 v (u0 / u) - Part 2-21: Cables - For general applications - Cross-linked elastomeric insulated flexible cables

TS EN 50525-2-22 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 v (u0 / u) - Part 2-22: Cables for general applications - High flexible braided cables with cross-linked elastomeric insulation

TS EN 50525-2-31 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 v (u0 / u) - Part 2-31: Cables - Single core cables without thermoplastic PVC insulation

TS EN 10257-1 Steel wires - Unalloyed steel - Zinc or zinc alloy coated - Part used for the manufacture of armored energy or telecommunication cables 1: Field cables

TS HD 632 S2 Cables - Extruded insulated power cables with rated voltages greater than 36 kv (um = 42 kv) and up to 150 kv (um = 170 kv) and their ancillary equipment

TS EN 50525-2-12 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 2-12: Cables for general applications - Thermoplastic PVC insulated cables for extendable ends

TS EN 50525-2-11 Electrical cables - Low voltage power cables - 450 / 750 V with rated voltage at most (Uo / U) - Part 2-11: Cables for general applications - Thermoplastic PVC insulated flexible cables

TS EN 50525-2-41 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 v (u0 / u) - Part 2-41: Cables for general applications - Single core cables with cross-linked silicone rubber insulation

TS EN 50525-2-51 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 2-51: Cables for general applications - Oil-resistant thermoplastic PVC insulated control cables

TS EN 50525-2-71 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 v (u0 / u) - Part 2-71: Cables for general applications - Thermoplastic pvc insulated flat wire-shaped cables (cords) )

TS EN 50143 cables - For signs and light discharge tube installations operating at voltage not exceeding 1 kv with rated voltage greater than 10 kv

TS EN 50525-2-42 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 2-41: Cables for general applications - Single-core cables without cross-linked Eva insulation

TS EN 61394: 2011 (EN) Air line conductors - Characteristics of grease for aluminum, aluminum alloy and bare steel conductors

TS EN 50525-2-82 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 2-82: Cables for general applications - Cross-linked elastomeric insulated cables for decorative chains

TS EN 50525-2-81 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 2-81: Cables for general applications - Cross-linked elastomeric shielded cables for arc welding

TS EN 50525-2-72 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 2-72: Cables for general applications - Thermoplastic PVC insulated flat cables (Cords)

TS EN 50525-3-11 Electrical cables - Low voltage power cables - Maximum rated voltage 450 / 750 v (Uo / U) - Part 3-11 - Cables for general applications - Halogen-free thermoplastic insulated and low smoke emission flexible cables

TS EN 50525-2-83 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 2-83: Cables for general applications - Multi-core cables with cross-linked silicone rubber insulation

TS EN 50525-3-21 Electrical cables - Low voltage power cables - 450 / 750 V with rated voltage at most (U0 / U) - Part 3-21: Special fire performance cables - Halogen-free cross-linked insulated and low smoke emission flexible cables

TS EN 50525-3-41 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 3 - 41 - Special fire performance cables - Halogen-free insulated and low smoke emission sheathed stranded cables

TS EN 50525-3-31 Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 3-31: Special fire performance cables - Halogen-free thermoplastic insulated and low smoke emission single core sheathed cables

TS EN 62230 Electric cables - Spark test method

TS EN 60811-100 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 100: General

TS EN 60811-201 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

TS EN 60811-202 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of non-metallic sheath thickness

TS EN 60811-203 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of rough dimensions

TS EN 60811-301 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 301: Electrical tests - 23 permeability measurement ° filling of compounds C

TS EN 60811-302 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 301: Electrical tests - 23 permeability measurement ° filling of compounds C

TS EN 60811-401 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 401: Various tests - Thermal aging methods - Aging in an air oven

TS EN 60811-402 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 402: Various tests - water absorption tests

TS EN 60811-403 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 403: Various tests - Cross-linked compounds Ozone resistance test

TS EN 60811-404 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 404: Various tests - Sheaths for mineral oil immersion tests

TS EN 60811-405 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths

TS EN 60811-406 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 406: Various tests - Resistance to stress when polyethylene and polypropylene compounds are released

TS EN 60811-407 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 407: Various tests - Mass increase measurement of polyethylene and polypropylene compounds

TS EN 60811-408 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 408: Various tests - Long-term stability testing of polyethylene and polypropylene compounds

TS EN 60811-409 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 409: Various tests - Thermoplastic insulation and mass loss test for sheaths

TS EN 60811-410 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 410: Various tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

TS EN 60811-411 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 411: Various tests - filling compounds Low temperature brittleness

TS EN 60811-412 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 412: Various tests - Thermal aging methods - Aging an air bomb

TS EN 60811-501 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Determination of mechanical properties of insulation and coating tests of compounds

TS EN 60811-502 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Insulation for tensile testing

TS EN 60811-503 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 503: Mechanical testing - Tensile testing for sheaths

TS EN 60811-504 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Insulation and low temperature tests for sheaths Bending

TS EN 60811-505 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Insulation and low temperature elongation for sheaths

TS EN 60811-506 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Low temperature impact test for insulation and sheaths

TS EN 60811-507 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials

TS EN 60811-508 Electrical and fiber optic cables - Test methods for non-metallic materials - 508 Section: Mechanical tests - High temperature pressure test and sheaths for insulation

TS EN 60811-509: 2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for cracking insulation and sheath resistance (heat shock test)

TS EN 60811-510 Electric and optical fiber cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds

TS EN 60811-511 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of melt flow index of polyethylene compounds

TS EN 60811-512 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation after high temperature conditioning

TS EN 60811-513 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Winding test after conditioning

TS EN 60811-601- Electrical and fiber optic cables - Test methods for non-metallic materials - Part 601: Physical tests - Filling drop point measurement of compounds

TS EN 60811-602 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 602: Physical tests - separation of petroleum filling compounds

TS EN 60811-603 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds

TS EN 60811-604 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of the absence of corrosive components in filling compounds

TS EN 60811-605 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of polyethylene compounds carbon black and / or mineral fillers

TS EN 60811-606 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 606: Physical tests - density determination methods

TS EN 60811-607 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black disintegration of polyethylene and polypropylene

TS EN 60811-602 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds

TS EN 50382-1: 2008 / A1: 2013 Railway applications - railway high temperature power cables with special fire performance - Part 1: General requirements

TS EN 50382-2: 2008 / A1: 2013 Railway applications - High temperature power cables of railway wagons with special fire performance - Part 2: Single core silicone insulated cables for 120 ° C or 150

TS EN 60811-201 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 201: General tests - Insulation thickness measurement

TS EN 50525-2-71 -electric cables - Low-voltage power cables with rated voltage up to and including 450 / 750 v- Part 2-71-Cables for general applications-Thermoplastic pvc insulated flat very thin cables (cords)

TS EN 50355 Railway applications - Cables with special fire performance for towing and towing vehicles - Operating instructions

TS EN 60811-202 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of non-metallic sheath thickness

TS EN 60811-203 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of external dimensions

TS EN 50525-2-21 / ACElectric cables - Low voltage power cables - Maximum rated voltage 450 / 750 v (u0 / u) - Part 2-21: Cables - For general applications - Cross-linked elastomeric insulated flexible cables

TS EN 61034-2 / A1 Measurement of smoke density of burning cables under specified conditions - Part 2: Test procedure and rules

TS EN 60811-301 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of permeability of filler compounds at 23 ° C

TS EN 60811-302 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of resistivity of filler compounds at 23 ° C and 100 ° C

TS EN 50525-3-21 / AC Electrical cables - Low voltage power cables - Rated voltage up to 450 / 750 V (U0 / U) - Part 3-21: Special fire performance cables - Halogen-free cross-linked insulated and low smoke emission flexible cables

TS EN 62230 / A1 Electric cables - Sparks - test method

TS EN 13501-6 Construction products and building elements - Fire classification - Part 6: Classification using data from the reactions of fire tests on electrical cables

TS EN 50565-1 Electric cables - Guidelines for the use of cables whose rated voltage does not exceed 450 / 750 V (U0 / U) - Part 1: General guide

TS EN 50575 Power, control and communication cables - subject to fire requirements for general applications in construction work

TS EN 60811-100 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 100: General

TS EN 60317-29 / A1 Winding wires - Part 29-Polyamide-Imide coated polyester or polyesterimide enamelled rectangular copper winding wire 200 class

TS EN 60317-0-6 / A1 Winding wires - Properties - Section 0: General specifications - Section 6: Glass-bare or enamelled round copper wire impregnated with resin or varnish.

TS EN 60317-17 Winding wires - Specification for specific types - Part 17: Polyvinyl acetal enamelled rectangular copper wire 105 class

TS EN 60317-26 / A2: 2010 Winding wires - Specification section 26: Polyamide-Imid enamelled round copper wire, round section 200

TS EN 60317-43 / A1 Winding wires - Specifications - Part 43: Round cross-section copper wire wrapped around aromatic polyimide, 240 class

TS EN 60317-44 / A1 Winding wires - Specifications - Part 44: Rectangular copper wire wrapped around aromatic polyimide strip, 240 class

TS EN 60317-0-5 Winding wires - Specifications for specific types - Section 0-5: General specifications - Bare or enamelled rectangular copper wire with glass fiber braiding, treated with resin or varnish

TS EN 60317-42 / A1 Winding wires - Specifications - Part 42: Polyester - Amide - Imid enamelled round copper wire, 200 class

TS EN 60317-22 / A1 Winding wires - Specification for certain types - Part 22: Round cross-section copper wire with polyamide enamels on polyester or polyesterimide, 180 class

TS EN 60317-18 / A1 Winding wires - Specification for specific types - Part 18: Polyvinyl acetal enamelled rectangular copper wire, 120 class

TS EN 60851-4 / A2 Winding wires - Test methods - Part 4: Chemical properties

TS EN 60889 Air line conductors - Hard drawn aluminum wire

TS EN 61232 Steel wires - Aluminum coated - for electrical purposes

TS EN 62420 Concentric strand braided air line electrical conductors with one or more cavities