Telecommunication Audio and Video Engineering Standards

Telecommunications audio and video engineering The required standards in the field are as follows. Our company performs the test, inspection and certification of all the following standards with the latest technology devices quickly and reliably.

TS 8117 EN 60118-0 Hearing aids section 0: Measurement methods for electroacoustic characteristics

TS EN 60244-9 Measurement methods for radio-frequency transmitters-Performance characteristics of television transmitters

TS EN 61079-1 Measurement methods for 12 ghz receivers used in satellite broadcasting part 1: Radio frequency measurements in outdoor units

TS EN 50049-1 The requirements for the connection of electronic equipment used at home or in similar places, the connector of the devices connected to the television

TS EN 50098-1 Cabling customer premises and facilities for information technology - Part 1: Basic access to ISDN

TS EN 60094-1 Magnetic tapes - Voice recording and reading systems section 1: General requirements and specifications

TS EN 60094-2 Magnetic tape voice recording and reading systems section 2: Calibration tapes

TS EN 60094-3 Magnetic tape sound recording and reading systems section 3: Method of measuring the properties of voice recorder and sound reader devices on magnetic tape

TS EN 60094-4 Magnetic tapes - Voice recording and reading systems section 4: Mechanical properties of magnetic tapes

TS EN 60094-5 Magnetic tapes - Voice recording and reading systems section 5: Electrical properties of magnetic tapes

TS EN 60094-7 Magnetic tape voice recording and reading systems section 7: Tape for commercial tape recordings and home-like uses

TS EN 60169-23 Radio frequency connectors part 23: End and socket connectors for use with 3,5 mm external conductor outer diameter 3,5 mm inelastic precision coaxial lines

TS EN 60169-25 Radio frequency connectors section 25: 13,56 for the use of balanced shielded cables with an inner radius of mm outer conductor and double internal conductor

TS EN 61319-1 + A11 Interconnection of satellite receivers - Part 1: Europe

TS EN 61580-7 Measurement methods for waveguides - Part 7: Graphical method for determining the performance of waveguides

TS EN 60510-2-5 Measurement methods for radio equipment used in satellite ground stations - Part 2: Measurements for subsystems - Part 5: Frequency modulators

TS EN 60510-2-6 Measurement methods for radio equipment used in satellite ground stations-Section 2: Measurements for subsystems-Part 6: Frequency demodulators

TS EN 60510-3-4 Measurement methods for radio equipment used in satellite earth stations - Part 3: Measurements for combinations of subsystems - Part 4: Measurements for frequency division multiplexer communication

TS EN 122001 Blank detail specifications - cecc military specifications related to radio frequency connectors

TS EN 50147-1 Anechoic chambers - Part 1: Screen reduction measurement

TS EN 50147-2 Anechoic chambers - Part 2: Alternative test site suitability according to site reduction

TS EN 122130 Part specifications: Radio frequency coaxial connectors, smb series

TS EN 122140 Part specifications: Radio frequency coaxial connectors-Smc series

TS EN 122150 Part specifications: Radio frequency coaxial connectors-E / a flange series

TS EN 60835-2-2 Measurement methods for devices used in digital microwave radio transmission systems section 2-Measurements in radio-relay systems used on earth-Section two antennas

TS EN 60835-2-4 Measurement methods for devices used in digital radio communication systems - Part 2: Measurements in terrestrial radio relay systems - Part 4: Transmitter / receiver with modulator / demodulator

TS EN 60835-2-5 Measurement methods for devices used in digital radio communication systems - Part 2: Measurements in terrestrial radio-relay systems - Part 5: Digital signal processing subsystems

TS EN 60835-2-6 Measurement methods for devices used in digital radio communication systems - Part 2: Measurements in terrestrial radio-relay systems - Part 6: Protective switching

TS EN 60835-2-7 Measurement methods for devices used in digital radio communication systems - Part 2: Measurements in terrestrial radio-relay systems - Part 7: Differential factor switching and combining device

TS EN 60835-2-9 Measurement methods for devices used in digital radio communication systems section 2: Measurements in terrestrial radio-relay systems-Part 9: Service channels

TS EN 60835-2-10 Measurement methods for devices used in digital radio communication systems section 2: Measurements in terrestrial radio-relay systems-Part 10: Functionality of the whole system

TS EN 60835-3-1 Measurement methods for devices used in digital radio communication systems - Part 3: Measurement on satellite ground stations - Part 1: General

TS EN 60835-3-2 Measurement methods for devices used in digital radio communication systems - Part 3: Measurements at satellite ground stations - Part 2: Antenna

TS EN 60835-3-4 Measurement methods for devices used in digital radio communication systems - Part 3: Measurement at satellite ground stations - Part 4: Low noise amplifier

TS EN 60835-3-5 Measurement methods for devices used in digital radio communication systems - Part 3: Measurement on satellite earth stations - Part 5: Upper and lower converters

TS EN 60835-3-6 Measurement methods for devices used in digital radio communication systems - Part 3: Measurement at satellite ground stations - Part 6: High power amplifiers

TS EN 60835-3-7 Measurement methods for devices used in digital radio communication systems - Part 3: Measurement on satellite ground stations - Part 7: Reliability value of reception systems

TS EN 60835-3-9 Measurement methods for devices used in digital microwave communication systems - Part 3: Measurements in satellite ground stations - Part 9: Channel per end device transport - Fa2 shift switch

TS EN 60835-3-10 Measurement methods for devices used in digital radio communication systems - Part 3: Measurements at satellite ground stations - Part 10: End device tdma traffic ground station

TS EN 60835-3-12 Measurement methods for devices used in digital radio communication systems - Part 3: Measurements on satellite ground stations - Part 12: Functionality of the whole system

TS EN 60835-3-13 Measurement methods for devices used in digital radio communication systems - Part 3: Measurement at satellite ground stations - Part 13: Vsat systems

TS EN 60835-3-14 Measurement methods for devices used in digital radio communication systems - Part 3: Measurements on satellite ground stations - Part 14 - Ground stations for satellite news collection

TS EN 60870-2-1 Remote-controlled devices and systems-Part 2: Operating conditions-Part 1: Power supply and electromagnetic compatibility

TS EN 60933-4 Audio, video and audio visual systems - Interconnections and harmonization values - Part 4: Connector cord set for digital cable routing in household and similar places (d2b)

TS EN 61079-5 Measurement method for receivers in the 12 ghz band used in satellite broadcast communication section 5: Electrical measurements on the decoder unit for Mac / packet system

TS EN 180101 General specifications - Fixed optical fiber attenuators

TS EN 181101 Blank detail specifications: Optical fiber branching elements-Type: Wavelength

TS EN 181102 Blank detail specification: Optical fiber branching elements-Type: Wavelength-select transmission star

TS EN 61094-4 Measuring microphones-Part 4: Specifications for working standard microphones

TS EN 186220 Part specifications: Connector sets for optical fibers and cables, lsc type

TS EN 186230 Part specifications: Connector sets for optical fibers and cables, lsf type

TS EN 61146-1 Image cameras 1- (pal / secam / ntsc) measurement methods-Part 1: Non-broadcast single-switch cameras

TS EN 60244-10 Measurement methods for radio transmitters - Part 10: Measurement methods for television transmitters and transmitters using the interrupt test signal

TS EN 60244-11 Measurement methods for radio transmitters - Part 11: Transmitters for FM broadcasting

TS EN 60244-12-1 Measurement methods for radio transmitters - Part 12: Guidelines for the preparation of explanatory sheets for audio and television broadcasting - Characteristics to be specified

TS EN 60244-12-2 Measurement methods for radio transmitters - Part 12: Guidance specification sheets for the preparation of explanatory sheets for audio and television broadcasting

TS EN 60244-13 Measurement methods for radio transmitters - Part 13: Operating characteristics for FM broadcasting

TS EN 60835-2-11 Measurement methods for devices used in digital microwave radio transmission systems section 2: Measurements in radio systems used in the earth - Relay systems - Part 11: Cross polarization interference cancelers "

TS EN 60874-19 Connectors for optical fibers and cables - Part 19: Part feature for fiber optic connectors - Sc-D type (duplex)

TS EN 61269-1-1 Fiber optic terminal sets - Blank detail tests

TS EN 61300-3-19 Fiber optic interconnection devices and passive components - Basic test and measurement methods - Part 3-19: Investigations and measurements - The dependence of the return loss of a single mode fiber optic component on the polarization

TS EN 60835-1-2 Measurement methods for devices used in digital microwave radio transmission systems - Part 1: Common measurements in radio-Role systems and satellite earth stations used on earth part 2: Basic characteristics

TS EN 60835-3-11 Measurement methods for devices used in digital radio communication systems - Part 3: Measurements at satellite ground stations - Part 11: Service channel device for Scpc-Psk shift switching communication

TS EN 60835-1-3 Measurement methods for devices used in digital microwave radio transmission systems-Part 1: Common measurements in radio-relay systems and satellite earth stations used in the earth-Part 3: Transmission characteristics

TS EN 60244-14 Measurement methods for radio transmitters - Part 14: External intermediate-modulation products caused by two or more transmitters using the same or adjacent antenna

TS EN 61196-3-3 Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal ground wiring - Detailed communication specifications for foam dielectric coaxial cables in local area networks up to 185 m in length and with a speed of 10 mb / s

TS EN 61580-4 Measurement methods for waveguides - Part 4: Reduction of waveguides and waveguides

TS EN 61580-6 Measurement methods for waveguides - Part 6: Return loss on waveguides and waveguides

TS EN 61754-8 Optical fiber interface connectors-Section 8: Cf08: Cf08 type connector family

TS EN 60864-2 Connection standardization between coin transmitters or transmitter systems and controllers - Interface standards for bus data type connections

TS EN 61300-2-32 Fiber optic interconnection devices and passive components-Basic test and measurement procedures section 2-32: Tests- Water vapor leakage

TS EN 61300-3-11 Fiber optic interconnection devices and passive components-Basic test and measuring procedures- Part 3-11: Inspections and measurements-Jointing and separation forces

TS EN 61300-2-36 Fiber optic interconnection devices and passive components-Basic test and measurement procedures-Part 2-36: Tests-Flammability (fire hazard)

TS EN 61300-3-23 Fiber optic interface - Connectors and passive elements - Basic test and measurement methods - Part 3-23: Tests and measurements - Position of the fiber with respect to the surface of the iron ring

TS EN 61000-2-10 Electromagnetic compatibility (emu) - Section 2-10: Environment-Definition of extra-atmospheric electromagnetic pulse (hemp) environment-Conducted disturbance

TS EN 300674 V 1.1.1Electromagnetic compatibility and radiospectrum issues (erm) - Road transport and traffic telematics (rttt) - 5,8 ghz industrial, scientific, medical (ism) bondela operating data communication devices for technical specifications and test methods

TS EN 300798 V 1.1.1 Digital audio broadcast - Distribution interface - Digital baseband phase and secondary interface

TS EN 301091 V 1.1.1 Electromagnetic compatibility and radiospectrum elements (erm) - Road transport and traffic telematics (rttt) - 76 ghz - Test methods and technical characteristics for radar equipment operation in the 77 ghz band

TS EN 60244-15 Measurement methods of radio transmitters - Part 15: Amplitude-modulated transmitters in audio broadcasting

TS EN 61000-4-28 Electromagnetic compatibility (emu) - Section 4-28: Test and measurement techniques-Change of power frequency, immunity test

300291-1 V 1.2.1 Communication management network (tmn) - Functional specifications for customer management (ca) in system / network item interface operations (os / n) section 1: Single-line configurations

TS EN 50289-3-9 Cables - Communication cables - Specification for test methods - Part 3-9: Mechanical test methods - Bending tests

TS EN 50117-1 Cables - Coaxial cables - Part 1: General specifications

TS EN 61204-3 Low-voltage power supplies, also with output - Part 3: Electromagnetic compatibility (emu)

TS EN 300098-3 V1.2.4 Integrated services digital network (ISDN); The number of the connected line not shown (colr) complementary service; Digital subscriber signaling system no: 1 (dss1) protocol; Section 3: The structure of the test setup for the user and the properties required for the test purposes (tss and tp)

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 300219-2 V1.1.1 Land mobile service; Radio devices sending signals that initiate a specific response at the receiver; Section 2: Harmonized standard covering the essential requirements according to the article 3.2 of the R and tte directives

TS EN 301430 V1.1.1 Satellite earth stations and systems (sound); Harmonized standard for portable ground stations (sng tes) that collect news by satellite operating in the frequency bands 3.2-11 / 12-13, which contains the basic requirements according to article 14 of the R and tte directives

TS EN 301489-5 V1.3.1 Electromagnetic compatibility and radio spectrum issues (erm); electromagnetic compatibility (emu) standard for radio equipment and services section 5: Special requirements for special terrestrial mobile radio (pmr) and auxiliary equipment (speech and non-speech)

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301489-8 V1.2.1 Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 8: Special requirements for GSM base stations

Electromagnetic compatibility and radio spectrum issues (erm) TS EN 301489-10 VI.3.1 Electromagnetic compatibility (EMC) standard for radio equipment and services - Part 10: Particular requirements for the first (ct1 and ct1 +) and second generation cordless telephone (ct2) equipment

TS EN 301489-15 V1.2.1 Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (emc) standard for radio equipment and services - Part 15: Particular requirements for commercially available amateur radio equipment

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301489-16 V1.2.1 Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 16: Particular requirements for portable and portable analogue cell radio communications equipment

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301489-19 V1.2.1 Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 19: Particular requirements for only receiving mobile ground stations (romes) operating in the 1,5 ghz band providing data communication

TS EN 301511 V9.0.2Global system for mobile communications (gsm); Harmonized standard for mobile stations in the gsm 3.2 and gsm 900 bands, which contains the basic requirements according to Article 1800 of the rvette directive

TS 2140 EN 60215 For radio transmitting devices - Safety regulations

50065-4-1 TS EN 3-148,5-4 Signing in low voltage electrical installations with frequency range 1 kHz to XNUMX khz - part XNUMX - XNUMX: Low voltage separation filters; General features

TS EN 50065-4-2 Signals in low-voltage electrical installations in the frequency range 3 khz to 148,5 khz-Section 4-2: Low-voltage separation filters-Safety rules

TS EN 50248 Digital sound transmission (ssy-dab) system - Characteristics of receivers

TS EN 50289-1-3 Communication cables for test methods - Specification - Part 1-3: Electrical test methods - Dielectric strength

TS EN 50289-1-4 Communication cables - Specification for test methods - Part 1-4: Electrical test methods - Insulation resistance

TS EN 50289-1-5 Communication cables - Specification for test methods - Part 1-5: Electrical test methods - Capacitance

TS EN 50289-1-7 Communication cables - Specification for test methods section 1-7: Electrical test methods - Spreading speed

TS EN 50289-3-1 Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods - General properties

TS EN 50289-3-11 Communication cables - Specification for test methods - Part 3-11: Mechanical test methods - Resistance of the cable to insulation from cutting

TS EN 50289-3-12 Communication cables - Specification for test methods - Part 3-12: Mechanical test methods - Nuisance damage

TS EN 50320 Digital audio broadcast system - Features of dab ordered devices for receivers (dcsr)

TS EN 61000-4-27 Electromagnetic compatibility (emu) - Section 4-27: Test and measurement techniques-Unbalanced, immunity test

TS EN 61966-8 Multimedia systems and equipment - Color measurement and management - Part 8: Multimedia color scanners (IEC 61966-8: 2001)

TS EN 62099 Fiber optic wavelength switches - General feature

TS EN 62107 Super video compact disc - Disc interchange system - Feature

TS EN 61000-3-11 Electromagnetic compatibility (emu) _part 3-11: Limit values-Voltage variations, voltage fluctuations and flicker limit values in low voltage mains supply systems-Equipment with a rated current <75a and its connection is conditional

Electromagnetic compatibility - Part 61000 - 4: Testing and measurement techniques; TS EN 23 - 4 - 23 Test methods of protective circuit elements used for high electromagnetic pulses and other radiated disturbances

TS EN 61120-1 Digital voice recorder- Reel-to-reel system - 6-3 mm magnetic cassette or professional use - Part 1: General features

TS EN 61204-3 Low-voltage power supplies, also with output - Part 3: Electromagnetic compatibility

Information technology - Automation of distribution using a distribution line carrier - Section 61334-5: Low-layer profiles - Spread frequency shifting (s-Fsk) profile

TS EN 61334-6 Information technology - Automation of distribution using a distribution line carrier - Section 6: A- Xdr coding rules

TS EN 61753-2-1 Fiber optic interconnection devices and passive components performance standard - Part 2-1: Single-mode terminated fiber optic connectors for category U - Uncontrolled environmental conditions (IEC 61753-2-1: 2000)

TS EN 61834-10 Recording-Helix- Digital video cassette system scanning using 6,35 mm magnetic tape for consumer use (525-0-625-50, 1128-60 and 1250-50- Section 10: Dtv format

TS EN 61834-6 Recording- Helical scan type digital video cassette recorder system (6,35-525, 60-625, 50-1125 and 60-1250 systems) using 50 mm magnetic tape for consumer use - Part 6: Sdl format

TS EN 61834-7 Digital video recording system (6,35-525, 60-625, 50-1125 and 60-1250 systems) using 50 mm magnetic tape for consumer use - Edtv7 format

TS EN 61834-8 Digital video cassette recording system (6,35-525, 60-625, 50-1125 and 60-1250 systems) with spiral-scanning scanning using 50 mm magnetic tape for consumer use part 8:

TS EN 61834-9 Heliconic- Scanning digital video cassette recording system (6,35-525-60-625, 50-1125 and 60-1250 systems) using 50 mm tape for consumer use

TS EN 301796 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm); Harmonized most standard for ct3.2 and ct1 + cordless telephones covering the essential requirements according to article 1 of the R and tte directives

TS EN 60315-3 + A1 Measurement methods in radio receivers for various emission classes - part 3: Receivers for amplitude modulated audio emission

TS EN 61300-3-16 Fiber optic interconnection devices and passive components - Basic testing and measuring procedures - Part 3-16: Tests and measurements - Radius of end face of spherically polished ferrules

TS EN 60835-3-6 Measurement methods for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite ground stations part 6: High-power amplifiers

TS EN 60835-3-7 Measurement methods for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite ground stations - Part 7: Usefulness of receiving system

TS EN 60835-3-9 Measurement methods for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite ground stations part 9: Scpc-Psk terminal equipment

TS EN 50065-7 Signaling of low-voltage electrical equipment in the frequency range from 3 kHz to 148,5 kHz-Part 7: Device improvisation dance

TS EN 50117-3-1 Coaxial cables - Part 3-1: Related requirements for cables used in communication applications-Miniaturized cables used in digital communication

TS EN 122340 Part specification standard - Radio frequency coaxial connectors - MMCX series

TS EN 62105 Digital audio broadcast system - Receiver data interface (RDI) specifications (EN 50255: 1997 renumbered EN 62105

TS EN 62121 Measurement methods for minidisc recorder / player

TS EN 62122 Digital VTR measurement methods for consumer use - Electronic and mechanical performances

TS EN 62148-1 Fiber optic active components and devices - Package and interface standards section 1: General specifications and guide

TS EN 50290-2-24 Communication cables-Part 2-24: General design rules and manufacturing-Pe sheath pulp

TS EN 50290-2-26 Communication cables - Part 2-26: General design rules and manufacturing-Halogen-free flame retardant insulation paste

TS EN 50290-2-27 Communication cables - Part 2-27: General design rules and manufacturing-Halogen-free flame retardant thermoplastic sheath pulps

TS EN 50290-2-28 Communication cables - Part 2-28: General design rules and manufacturing-Filling dough for filled cables

TS EN 50290-2-29 Communication cables - Part 2-29: General design rules and manufacturing-Cross-linked PE insulation paste

TS EN 50290-2-30 Communication cables - Part 2-30: General design rules and manufacturing - Poly (tetrafluoroethylene-hexafluoropropylene) (fep) insulation and sheath paste

61290-5-3 Fiber optic amplifiers-Basic features-Part 5-3: Test methods for reflection parameters; Reflection tolerance using electrical spectrum analysis extract

TS EN 61300-3-20 Fiber optic interconnection devices and passive components-Basic test and measurement procedures-Section 3-20: Inspections and measurements; Guiding the fiber optic branching device

Electromagnetic compatibility and radio spectrum subjects (erm) TS EN 300224-2 V1.1.1 On-site call service; Part 2: R and tte directive harmonized most standard according to article 3.2

Distribution automation using distribution line transport systems - Section 61334-4: Data communication protocols; System management using the condition 512-4-512; Management knowledge base (MIB)

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 300341-2 V1.1.1 Land mobile services (rp 02); A radio device using the internal antenna sending signals to initiate a specific response at the receiver; Section 2: the most harmonized standard according to the substance 3.2 of the R and tte directives

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 300390-2 V1.1.1 Land mobile service - Radio devices intended for the transmission of data (and speech) and using internal antennas - Part 2: Harmonized standard covering essential requirements according to Article 3.2 of the R and tte directives

TS EN 60793-1-21 Fiber optics-Section 1-21: Measurement methods and test procedures-Coating geometry (ic 60793-1-22: 2001)

TS EN 60793-1-22 Fiber optics-Section 1-21: Measurement methods and test procedures-Length measurement (ie 60793-1-22: 2001) TS EN 60793-1-33 Optical fibers-Section 1-33 methods and test procedures-Sensitivity to stress corrosion

60793-1-46 Fiber optics-Section 1-46: Measurement methods and test procedures; Monitoring the change in optical transition.

TS EN 61603-6 Transmission of audio and / or video and related signals using Infra-Red radiation - Part 6: Video and audio video signals.

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 300454-2 V1.1.1 Broadband audio lines; Section 2: the most harmonized standard according to the substance 3.2 of the R and tte directives

Electromagnetic compatibility and radio spectrum issues (erm) - Land mobile service; TS EN 300471-2 V1.1.1 300 rules for access and sharing of common channels via 113-compliant devices - Section 2: Harmonized standard encompassing the basic requirements of article 3.2 of the R and tte directives

TS EN 300718-2 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm); Avalanche beacon light; Transmitter and receiver systems; Part 2: Harmonized width covering the requirements specified in clause 3.2 of the R & tte regulation

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 300761-2 V1.1.1 Short range devices (srd); Automatic vehicle identification for railways operating in the 2,45 ghz frequency range; Part 2: Harmonized standard covering essential requirements according to article 3.2 of R and tte directives

TS EN 61753-2-3 Fiber optic interconnection devices and passive components performance standard - Part 2-3: Single-mode (* n and 2 * n wavelength non-branched disconnection device for U-class);

TS EN 61754-3 Fiber optic connector interfaces - Part 3: Lsa type connector family

TS EN 61754-9 Fiber optic connector interfaces - Part 9: Ds type connector family.

TS EN 61754-18 Fiber optic connector interfaces - Part 18: Mt-Rj type connector family

TS EN 61754-19 Fiber optic connector interfaces - Part 19. type 56 connector family

TS EN 301426 V1.2.1 Satellite earth stations and systems (sound); Harmonized most standard for marine mobile ground stations (mmes) that do not aim at low data transmission speed ground mobile ground stations (lmes) and hazard and security communication systems operating in the 3.2 / 1,5 ghz frequency bands, covering the essential requirements according to article 1,6 of the R and tte directives.

TS EN 61842 Microphones and headsets for speech transmission

TS EN 301441 V1.1.1 Satellite earth stations and systems (sound); The R and tte directives are harmonized with most for mobile ground stations, including ground stations used in the satellite personal communication network in the 3.2 / 1,6 ghz band under mobile satellite services covering the essential features of article 2,4

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301489-2 V1.3.1 Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 2: Special requirements for radio pagers

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301489-18 V1.3.1 Electromagnetic compatibility (EMC) standard for radio equipment and services Part 18: Particular requirements for terrestrial trunk radio (tetra) equipment

TS EN 62156 525 / 60 and 625 / 50 (numeric s) format, d-9 type component, 12,65 mm video printed digital video recording system

TS EN 61947-2 Electronic projection-Documentation and measurement of key performance criteria-Part 2: Variable resolution projectors

TS EN 301721 V1.2.1 Satellite earth stations and systems (sound): Mobile ground stations that contain the basic requirements of the article 3.2 of the R & tte directive, operate below 1 ghz and provide low step speed data communications by using low ground orbit (LED) satellites ( The harmonized en standard for mes)

TS EN 301796 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm): The harmonized most standard for cordless telephone equipment, which includes the basic requirements in clause 1 of the Ct1 and ct3.2 + r & tte directive

TS EN 301797 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm); Harmonized most standard for Ct2 wireless telmefon devices covering the essential requirements of article 3.2 of the r and tte directive

TS EN 301840-2 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm): Digital wireless microphones operating in the cept harmonized band of 1785 mhz to 1800 mhz; Part 2: The en standard harmonized with clause 3.2 of the R & tte directive

TS EN 50289-1-6 Communication cables - Specification for test methods - Part 1-6: Electrical test methods-Electromagnetic performance

TS EN 50289-1-10 Communication cables - Specification for test methods - Part 1-10: Electrical test methods-Diaphony

TS EN 50289-3-17 Communication cables - Specification for test methods - Part 3-17: Mechanical test methods-Dielectric adhesion and sheath

TS EN 301908-8 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm); Base stations (bs) and user devices (ue) for Imt-2000 third generation cellular networks; Part 8: The harmonized width of the ITM-3.2, TDMA single-Carrier (uwc 2000) (ue), covering the requirements specified in 136 of the R & Tte regulation

TS EN 301908-9 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm); Base stations (bs) and user equipment (ue) for Imt-2000 third generation cellular networks; Part 9: The harmonized width for the ITM-3.2, TDMA single-Carrier (uwc 2000) (bs), covering the requirements specified in 136 of the R & Tte regulation

TS EN 50289-4-9 Communication cables - Specification for test methods - Part 4-9: Environmental test methods-Weather resistance

TS EN 50290-2-20 Communication cables - Part 2-20: General design rules and manufacturing-General

TS EN 50290-2-21 Communication cables - Part 2-21: General design rules and manufacturing-PVC insulation paste

TS EN 50290-2-22 Communication cables-Part 2-22: General design rules and manufacturing-PVC sheath paste

TS EN 50385 Product standard for demonstrating the compatibility of radio base stations and fixed terminal stations for radio communication systems with reference levels or basic restrictions on the general exposure of the public to radio frequency electromagnetic fields (110 mhz-40ghz)

TS EN 61000-4-13 Electromagnetic compatibility and radio spectrum issues (erm); Experiment and measurement techniques; Harmonics and inter-harmonic signaling at aa power network terminals, low frequency immunity tests (ie 61000-4-13: 2002 / note: Declaration of approval)

TS EN 61000-4-25 Electromagnetic compatibility and radio spectrum issues (erm); Chapter 4-25: Hemp immunoassay methods for devices and systems (ie 61000-4-25: 2001)

TS EN 61966-8 Multimedia systems and equipment - Color measurement and management - Part 8: Multimedia color scanners

TS EN 50117-3-1 Cables - Coaxial cables - Part 3-1: Part specifications of cables used in telecommunications applications - Miniaturized cables used in digital communication systems

TS EN 300098-1 V1.2.4 Integrated services digital network (ISDN); The number of the connected line not shown (colr) complementary service; Digital subscriber signaling system no: 1 (dss1) protocol; Section 1: Protocol properties

TS EN 300718-3V1.2.1 Electromagnetic compatibility and radio spectrum issues (erm); Avalanche radio devices; Transmitter and receiver systems; Chapter. 3: Harmonized most standard covering the basic requirements of the R and tte directive according to Article 3.3 e

TS EN 50289-1-10 Cables - Communication cables - Specifications for test methods - Part 1-10: Electrical test methods - Diaphony

TS EN 50289-3-17 Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods - Adhesion of dielectric and sheath

TS EN 50289-4-9 Cables - Communication cables - Specification for test methods - Part 4-9: Environmental test methods - Pneumatic durability

TS EN 50065-7 Signaling in the 3 kHz to 148,5 kHz frequency range for low voltage electrical installations - Part 7: Device impedance

TS EN 60244-10 Measurement methods for radio transmitters - part 10: Measurement methods for television transmitters and transmitters using commissioning test signals

TS EN 60244-11 Measurement methods for radio transmitters - part 11: Transmitters for FM broadcasting

TS EN 60244-14 Measurement methods for radio transmitters - part 14: External intermediate modulation products from two or more transmitters using the same or adjacent antennas

TS EN 60510-2-5 Measurement methods for radio equipment used in satellite ground stations part 2: Measurements for subsystems part 5: Frequency modulators

TS EN 60510-2-6 Measurement methods for radio equipment used in satellite ground stations - part 2: Measurements for subsystems - part six: Frequency demodulators

TS EN 60510-3-4U measurement methods for radio equipment used in ground stations - part 3: methods of measurement for combinations of subsystems - part 4: measurements for frequency division multiplexed (fdm) transmission systems

TS EN 60864-2 Standardization of interconnections between broadcast transmitters or transmitter systems and controllers - Part 2: Interface standards for systems using bus-type interconnections

TS EN 60870-5-1 Telecontrol equipment and systems part 5: Transmission protocols part 1 - Transmission frame formats

Electromagnetic compatibility (EMC) - part 61000-4: Test and measurement techniques - Harmonics and intermediate harmonics including energy network signaling at the Aa energy end - Low frequency immunity tests

TS EN 61603-6 Transmission of sound and / or images and related signals using infrared radiation - Part 6: Picture and sound - Visual signals

TS EN 300188-4 V1.4.1 Integrated services digital network (ISDN); Digital subscriber signaling system no.1 (dss1) protocol; Complementary service with three subscribers (3pty); Section 4: General test setup (ATS) for the user and partial protocol applications additional information for the experiment (PIXIT) Proforma properties

TS EN 61754-3 Fiber optic connector interfaces - part 3: Lsa type connector family

TS EN 61754-9 Fiber optic connector interfaces - part 9: Ds type connector family

TS EN 61754-19 Fiber optic connector interfaces section 19: Sg type connector family

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301489-13 V1.2.1 Electromagnetic compatibility (emu) standard for radio equipment and services; Part 13: Special requirements for public band radio (cb) and auxiliary equipment

TS EN 50065-2-1 Signaling in the 3 khz to 148,5 kHz frequency range in low voltage electrical installations - Part 2-1: Network communication equipment and systems for the 95 kHz to 148,5 kHz frequency range designed for use in residential, commercial and light industrial environments. conditions

TS EN 50065-2-2 Signaling in the 3 khz to 148,5 khz frequency range in low voltage electrical installations - Part 2-2: Immunity requirements for network communication devices and systems designed for use in industrial environments and operating in the 95 khz to 148,5 kHz frequency range

TS EN 50065-2-3 Signaling in the 3 khz to 148,5 khz frequency range in low voltage electrical installations - Part 2-3: Immunity to network communications equipment and systems designed for use by electrical distributors and suppliers and operating in the 3 khz to 95 kHz frequency range

TS EN 50370-2 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity

TS EN 50385 In relation to radio frequency electromagnetic fields (110 MHz-40 GHz) to which human beings are exposed, the product standard for demonstrating the conformity of radio base stations and fixed terminal stations used in wireless communication systems to reference levels or basic restrictions - Public

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 300718-2 V1.1.1 Avalanche radio device; Transmitter and receiver systems; Chapter. 2: Harmonized most standard covering the basic requirements of the R and tte directives according to Article 3.2

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301840-2 V1.1.1 1785 mhz - Digital radio microphones operating in the harmonized band of 1800 mhz cept; Section 2: the most harmonized standard according to the substance 3.2 of the R and tte directives

TS EN 61000-4-7 Electromagnetic compatibility (emu) section 4-7: Tests and measuring techniques - general guide for measuring and harmonic measurements of harmonic and intermediate harmonics in power supply systems and connected devices

TS EN 50384 Product standard (110 mhz-40 ghz) for indicating the compliance of fixed end stations and radio stations for wireless telecommunication systems with reference to basic levels of radio frequency electromagnetic fields or for basic restrictions

TS EN 61300-3-16 Fiber optic interconnection devices and passive elements - Basic test and measuring methods - Part 3-16: Tests and measurements - Radius of the finish surface of spherically polished iron rings

Electromagnetic compatibility and radio spectrum issues (erm) TS EN 301489-10 VI.3.1 Electromagnetic compatibility (EMC) standard for radio equipment and services - Part 10: Particular requirement for the first (ct1 and ct1 +) and second generation cordless telephone (ct2) device

TS EN 303035-1 VI.2.1 R and tte directive harmonized en, section 3.2 for the tetra device covering the essential features of the substance 1: Voice + data (v + d)

TS EN 303035-2 VI.2.2 Harmonized en standard for tetra equipment containing the basic requirements in item 3.2 of the R & tte directive section 2: Direct mode operation (dmo

TS EN ISO 11904-1 Acoustics - Determination of sound pollution from sound sources placed close to the ear - Part 1: Technique using the microphone placed in the real ear (myr technique)

TS EN 50065-2-3 Part feature standard: Radio frequency coaxial connectors-Smc series

TS EN 50370-2 Electromagnetic compatibility (emu) - Product family standard for machine tools - Part 2: Immunity

TS EN 62148-10 Fiber optic active elements and circuits - Packet and interface standards - Part 10: Sff mu duplex Transceivers with 20 tips

TS EN 187103 Family property standard - Fiber optic cables for indoor applications

TS EN 60774-4 Vhs type helical scanning video tape using 12,65 mm (0,5 inch) magnetic tape - Part4: S-Vhs videotape system - Meat mode

TS EN 61000-2-12 Electromagnetic compatibility (emu) section 2-12: Environment - Compatibility levels for signaling and low frequency transmitted disturbances in medium-voltage power supply systems in the public grid

TS EN 61291-5-2 Optical amplifiers - Part 5-2: Specification specification standard - Reliability specification for optical fiber amplifiers

TS EN 62148-4 Fiber optic active elements and circuits - Package and interface standards - Part 4: Pn 1x9 plastic optical fiber transceivers

TS EN 62148-5 Fiber optic active elements and circuits - Package and interface standards - Part 5: Sc 1x9 fiber optic modules

TS EN 62148-7 Fiber optic active elements and circuits - Package and interface standards - Part 7: Sff lc Transceivers with 10 terminals

TS EN 62148-8 Fiber optic active elements and circuits - Package and interface standards - Part 8: Sff lc Transceivers with 20 terminals

TS EN 62148-9 Fiber optic active elements and circuits - Packet and interface standards - Part 9: Sff mu duplex Transceivers with 10 tips

TS EN 61000-2-2 Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compliance levels for low-frequency transmitted disturbances and signaling in public low-voltage power supply systems

TS EN 61000-2-4 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compliance levels in industrial plants for low frequency transmitted disturbances

TS EN 50065-4-2 / A1 Signing in low voltage electrical installations - in the frequency range 3 khz to 148,5 khz - Part 4-2: Low voltage separation filters - Safety regulations

TS EN 13500 Thermal insulation materials - Used in buildings - mineral wool based external composite thermal insulation systems (etıcs) - Features

50288-5-2 Multi-element metal cables for analog and digital communication and control - Section 5-2: Section specification standard for screened cables up to 250 mhz; Work area and patch beam cables

TS EN 50289-3-13 Communication cables - Requirements for test methods - Part 3-13: Mechanical test methods - Wind vibration.

TS EN 50377-9-2 Connector kits and connectors for use in optical fiber communication systems - Product specification standard - Part 9-2: Iec 60793-2 category b.1.1 terminated mt-Rj type in single mode fiber

TS EN 60793-1-40 Optical fibers - Part 1- 40: Measurement methods and test procedures - Attenuation

60793-1-45 Optical fibers - Part 1- 45: Measurement methods and test procedures - Mode field diameter

TS EN 60794-4 Optical fiber cables - Part 4: Part specification standard; Overhead optical cables parallel to power lines

Optical amplifiers - Test methods - Part 61290-3: Noise sign parameters; TS EN 1-3-1 Optical spectrum analyzer method

61290-5-2 Optical amplifiers - Test methods - Part 5-2: Reflection parameters; Electrical spectrum analyzer method

61290-10-3 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters; Prop methods

TS EN 61603-7 Transmission of sound and / or images and related signals using infrared radiation - Part 7: Digital vocal signals for conferences and similar applications

TS EN 61603-8-1 Transmission of sound and / or images and related signals using infrared radiation - Part 8-1: Signs related to digital audio and digital audio

TS EN 61753-053-3 Performance standard for fiber optic interconnection circuits and passive components - Part 053-3: Continuously variable attenuators for category u - Uncontrolled environment

TS EN 62148-6 Fiber optic active elements and circuits - Package and interface standards - Part 6: Atm-Pon transceivers

TS EN 62148-12 Fiber optic active elements and circuits - Package and interface standards - Part 12: Laser transmitters with coaxial rf connectors

TS EN 62149-6 Fiber optic active elements and circuits - Performance standards - Part 6: 650 nm 250 mbit / s plastic optical fiber transceivers

50288-4-2 Multi-element metal cables for analog and digital communication and control - Section 4-2: Section specification standard for screened cables up to 600 mhz; Work area and patch beam cables

Electromagnetic compatibility and radio spectrum issues (erm) - Transmitters and receivers used in mobile marine systems in the mf and hf bands; TS EN 300373-2 V1.1.1 Section 2: Harmonized standard that meets the essential requirements according to Article 3.2 of the Rtte directive

Electromagnetic compatibility and radio spectrum issues (erm) - Transmitters and receivers used in mobile marine systems in the mf and hf bands; TS EN 300373-3 Section 1.1.1: Harmonized standard of the Rtte directive which meets the essential requirements in accordance with Article 3 (e)

TS EN 301997-2 V.1.1.1 Communication and multiplexing (tm); Multi-point device; Radio equipment for use in multimedia radio systems (mws) in the 40,5 ghz to 43,5 ghz frequency band; Section 2: Harmonized standard that meets the essential requirements according to Article 3.2 of the Rtte directive

Electromagnetic compatibility and radio spectrum issues (erm) - Meteorological assistive devices (met aids) TS EN 302054-2 V.1.1.1 Radio probe devices used at power levels up to 200 mw and in the frequency range 400,15 mhz to 406 mhz; Section 2: Harmonized standard that meets the essential requirements according to Article 3.2 of the Rtte directive

TS EN 302054-2 V.1.1.1 Electromagnetic compatibility and radio spectrum issues (erm) - Meteorological auxiliary devices (met aids); Radio probes used at power levels up to 200 mw and in the frequency range from 400,15 mhz to 406 mhz; Part 2: Harmonized EN standard meeting the essential requirements according to clause 3.2 of the Rtte directive

TS EN 302186 V.1.1.1 Satellite earth stations and systems (sound); Harmonized standard for satellite mobile aerial ground stations (AES) operating in the 3.2 / 11 / 12 ghz frequency bands covering the basic rules according to Article 14 of the Rtte directive

TS EN 50407-1 End-user multi-pair cables used in high bit rate telecommunications networks - Part 1: Outdoor cables

TS EN 50117-2-2 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - Open operating cables for operating systems at 5 MHz - 1 000 MHz

TS EN 50117-2-3 Coaxial cables - Part 2-3: Part specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for systems running on 1000 mhz

TS EN 50117-2-4 Coaxial cables - Part 2-4: Part specification standard for cables used in cable distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz

TS EN 50117-2-5 Coaxial cables - Part 2-5: Part specification standard for cables used in wired distribution networks - 5 mhz - Outdoor landing cables for systems operating on 3000 mhz

TS EN 50406-2 End-user multi-pair cables used in high bit rate telecommunications networks - Part 2: Trough and flush cables

TS EN 50406-1 End-user multi-pair cables used in high bit rate telecommunications networks - Part 1: Overhead cables

TS EN 301427 V1.2.1 Satellite earth stations and systems (sound); Harmonized standard for low data rate mobile satellite earth stations (mes), except for air mobile satellite earth stations operating in the 3.2 / 11 / 12 ghz frequency bands covering the basic rules according to the article 14 of the Rtte directive

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-20 Part 2.1: Special requirements for mobile ground stations (mes) used in mobile satellite services (mss)

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-22 V1.3.1 Part 22: Special requirements for ground based vhf aerial mobile and fixed radio equipment

TS EN 61000-6-2 Electromagnetic compatibility (emu) - Part 6-2: General standards - Immunity for industrial environments

TS EN 50384 In relation to the radio frequency electromagnetic fields (110 mhz - 40 ghz) to which human beings are exposed, the product standard for demonstrating the conformity of radio base stations and fixed terminal stations used in wireless communication systems to reference levels and basic restrictions - For occupationally exposed persons

TS EN 60825-2 Safety rules - Part for laser products 2: Safety of fiber optic communication systems (fohs)

TS EN 61800-3 Adjustable speed electric power drive systems - Part 3: Emu product standard with special test methods

TS EN 50370-1 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission

TS EN 60825-2 Safety of laser products - Part 2: Safety of fiber optic communication systems

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-27 V1.1.1 Part 27: Particular requirements for very low power active medical implants (ulp-Ami) and related peripheral circuits (ulp-Ami-P)

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-28 V1.1.1 Part 28: Special requirements for wireless digital video lines

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301843-2 V1.2.1 Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 2: Special requirements for radiotelephone transmitters and receivers

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 301843-4 V1.2.1 Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 4: Special requirements for navtex receivers for narrow band direct printers (nbdp)

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for marine radio equipment and services; TS EN 301843-5 V1.1.1 Part 5: Special requirements for mf / hf radiotelephone transmitters and receivers

Electromagnetic compatibility and radio spectrum considerations (erm) - 302195 khz - 2 kHz radio equipment for very low power active medical implants (ulp-Ami) and auxiliary circuits; TS EN 1.1.1-9 V315 Section 2: Harmonized standard encompassing the basic rules according to Article 3.2 of the Rtte directive

V. EN 302245-2 V.1.1.1 Electromagnetic compatibility and radio spectrum issues (erm) - Sending device for digital world radio (drm) broadcasting service - Part 2: Harmonized most standard conforming to article 3.2 of the Rtte directive

TS EN 302297 V1.1.1 Electromagnetic compatibility and radio spectrum issues (erm) - Transmitting device for analogue television broadcasting service; Harmonized most standard conforming to the substance 3.2 of the Rtte directive

TS EN 302077-2 V.1.1.1 Electromagnetic compatibility and radio spectrum issues (erm) - Transmitter for terrestrial digital audio broadcasting (t-Dab); Part 2: Harmonized standard according to the substance 3.2 of the Rtte directive

TS EN 60332-1-1 Electrical and optical fiber cable tests at risk of fire - Part 1-1: Vertical flame propagation test for insulating single wire and fiber cable - Apparatus

TS EN 60332-1-2 Tests for electrical and optical fiber cables at risk of fire - Part 1-2: Vertical flame propagation test for insulating single wires and fiber cables

TS EN 60332-1-3 Fire and electrical fiber optic cable tests - Part 1-3: Vertical flame propagation test for insulating single wire and fiber cable

TS EN 60332-2-1 Tests for electrical and optical fiber cables at risk of fire - Part 2-1: Vertical flame propagation test for insulating small single copper wire and fiber cable - Apparatus

TS EN 60332-2-2 Electrical and optical fiber cable tests at risk of fire - Part 2-2: Vertical flame propagation test for insulating small single wire and fiber cable - Procedure for spreading flame

TS EN 50065-2-1 / A1 3 kHz - Signing in low-power electrical installations in the 148,5 kHz frequency range - Part 2-1: Systems operating in the 95 kHz - 148,5 kHz frequency range and intended for use in home, commercial and light industrial environments rules for immunization equipment

50065-2-2 / A1 3 khz - Signing of low voltage electrical installations in the 148,5 khz frequency range - Section 2-1: intended for use in residential, business and lighting industries and with systems operating in the 95 kHz to 148,5 kHz frequency range rules for medical devices

50065-2-3 / A1 TS EN 3-148,5-2 / A3 Signaling in the 3 kHz to 95 kHz frequency range in low-voltage electrical installations - Part XNUMX-XNUMX: Designed for use by electrical distributors and suppliers and designed for use in the XNUMX kHz to XNUMX kHz frequency range immune conditions

TS EN 50065-4-2 / A2 Signals in low-voltage electrical installations-3 khz to 148,5 khz and 1,6 mhz to 30 mhz frequency range-Section 4-2: Low-voltage separation filters-Safety rules

TS EN 50065-4-7 3 kHz - 148,5 kHz and 1,6 mhz - Signing in the low voltage electrical installation in the frequency range 30 mhz - Part 4-7: Portable low voltage decoupling filters - Safety rules

TS EN 50288-7 Multi-element metal cables for analog and digital communication and control - Part 7: Part specification standard for instrumentation and control cables

TS EN 50290-2-1 Communication cables - Part 2-1: Common design rules and construction

TS EN 61280-2-10 Fiber optic communication auxiliary system test procedures - Part 2-10: Digital systems - Time-based chirp and alpha factor measurement of laser transmitters

61290-11-2 Optical amplifier - Test methods - Part 11-2: Polarization mode distribution; Poincare sphere analysis method

Electromagnetic compatibility (emu) - Part 61000-4: Testing and measuring techniques - Voltage ripple immunity test for equipment with input current per phase not exceeding 14 a

TS EN 61753-091-3 Performance standard for fiber optic interconnection circuits and passive components - Part 091-3: Single mode fiber optic pig tail circulators for category U - Uncontrolled environment

TS EN 61754-21 Fiber optic interface interfaces - Part 21: SMI connector family for plastic optical fiber

TS EN 61754-22 Fiber optic interface interfaces - Part 22: F-SMA type connector family

TS EN 61754-23 Fiber optic interface interfaces - Part 23: Lx.5 type connector family

TS EN 61967-2 Integrated circuits - 150 KHz - Measurement of 1 GHz electromagnetic emissions - Part 2: Measurement of airborne emissions - TEM cell and broadband TEM cell method

TS EN 62150-1 Fiber optic active elements and circuits - Test and measuring procedures - Part 1: General and guidance

TS EN 62356-1 Video recording - D-12,65 format in 11 mm type - Section 1: Tape recording

TS EN 62356-2 Video recording - D-12,65 format in 11 mm type - Section 2: Image compression and data stream

TS EN 62356-3 Video recording - d-12,65 format in 11 mm type - Section 3: Data mapping via SDTI

TS EN 50083-9 Wired distribution systems for television and audio signals section 9: Interfaces for similar professional devices for catv / smatv head ends and dvb / mpe6-2 transmission streams "

TS EN 61937-7 Interface for non-linear PCM encoded audio bits array applied to IEC 60958-Part 7: Nonlinear PCM bit arrays according to ATRAC, ATRAC 2 / 3 and ATRAC-X formats

TS EN 62005-4 Reliability of passive optical components of optical fiber interconnectors - Part 4: Product overview

TS EN 50117-2-1 Cables - Coaxial cables - Part 2-1: Part specifications for indoor stud cables used in wired distribution networks - 5 mhz-1000 mhz systems

TS EN 60315-3 + A1 Measurement methods for radio receivers in various broadcast classes - Part 3: Receivers for receiving amplitude modulated transmissions

TS EN 60512-11-14 For electronic devices - Electromechanical components - Basic test procedures and measuring methods - Part 11: Air conditioning tests - Part 14: Test 11p - Flowing single gas corrosion test

TS EN 61300-2-18 Fiber optic interconnection devices and passive components-Basic test and measurement procedures-Section 2-18: Tests-Dry temperature-Resistance to high temperature

TS EN 61883-2 Audio / visual device for consumer - Digital interface - Part 2: Sd- Data transmission with digital video cassette recorder (svkk-Dvcr)

TS EN 60708 Moisture resistant polyolefin sheath and polyofelin insulated low frequency cables

TS EN 61744 Fiber optic chromatic dispersion - Calibration of experiments

TS EN 61543 / A2 Electromagnetic compatibility - Residual current protective devices (rcd) - Used in homes and similar places

TS EN 61754-13 Fiberoptic connector interfaces - Part 13: Fc-Pc type connector family

TS EN 61280-2-11 Fiber optic communication auxiliary system test procedures - Part 2-11: Numerical systems - Determination of the average q-factor using amplitude histogram assessment for optical signal quality monitoring

TS EN 61280-4-4 Fiber optic communication auxiliary system test procedures - Part 4-4: Cable installation and lines - Measurement of polarity mode distribution for installed lines

TS EN 61300-3-18 Fiber optic interface - Connectors and passive elements - Basic test and measurement methods - Part 3-18: Tests and measurements - Locking accuracy of the connector on the angled surface

TS EN 62040-2 Uninterruptible power systems (kgc) - Part 2: Electromagnetic compatibility (emu) rules

Electromagnetic compatibility and radio spectrum issues (erm) - Road transport and traffic telematics systems (rttt) TS EN 300674-2-1 1.1.1 ghz dedicated short-range communication (dsrc) sending device (5,8 kbit / s / 500 kbit / s) operating in the industrial, scientific and medical (ism) band; Section 250: Harmonized standard that meets the essential requirements according to Article 2 of the Rtte directive

Electromagnetic compatibility and radio spectrum issues (erm) - Road transport and traffic telematics systems (rttt) TS EN 300674-2-2 1.1.1 ghz dedicated short-range communication (dsrc) sending device (5,8 kbit / s / 500 kbit / s) operating in the industrial, scientific and medical (ism) band; Section 250: Harmonized standard that meets the essential requirements according to Article 2 of the Rtte directive

TS EN 301360 V1.2.1 Satellite earth stations and systems (sound); Harmonized standard for satellite user terminals (sut) and satellite interactive terminals (sIT) referring to stationary satellites in the 3.2 ghz to 27,5 ghz frequency band, which satisfy the essential requirements according to Article 29,5 of the Rtte directive

TS EN 301428 V1.3.1 Satellite earth stations and systems (sound); Harmonized standard for very small beam terminal (VSAT) devices; Only transmitting, transmitting / receiving or receiving satellite earth stations operating in the 3.2 / 11 / 12 ghz frequency band, which satisfy the essential requirements according to Article 14 of the Rtte directive

TS EN 301443 V1.3.1 Satellite earth stations and systems (sound); Harmonized standard for very small beam terminal (VSAT) devices; Only transmitting, transmitting / receiving or receiving only satellite earth stations operating in the 3.2 ghz and 4 ghz frequency band, meeting the basic requirements according to Article 6 of the Rtte directive

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-11 Part 3.1: Special requirements for terrestrial audio broadcast service transmitters

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-25 V2.3.2 Part 25: Special requirements for Cdma 1x diffuse spectrum mobile stations and auxiliary devices

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-26 V2.3.2 Part 26: Specific requirements for Cdma 1x common spectrum base stations, repeaters and auxiliary devices

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-32 Part 1.1: Special requirements for ground and wall probe radar applications

Electromagnetic compatibility and radio spectrum considerations (erm) - Transmitter for amplitude modulated (am) audio broadcasting services TS EN 302017-2 V1.1.1 Section 2: Harmonized standard that meets the essential requirements according to Article 3.2 of the Rtte directive

TS EN 302018-2 VI.2.1 Electromagnetic compatibility and radio spectrum issues (erm) - Transmitting device for frequency modulated (fm) audio broadcasting services; Section 2: Harmonized standard that meets the essential requirements according to Article 3.2 of the Rtte directive

TS EN 50065-4-2 / A2Signals in low voltage electrical installations in the frequency range 3 khz to 148,5 khz-Section 4-2: Low-voltage separation filters-Safety rules

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-31 Part 1.1.1: Particular requirements for devices in the 31 khz to 9 khz band for very low power active medical implantable (ulp-Ami) devices and their peripheral devices (ulp-Ami-P)

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-7 V1.3.1 Chapter 7: Digital cellular radio telecommunications systems

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for radio equipment and services; TS EN 301489-7 V1.3.1 Part 7: Specific requirements for digital cellular radio telecommunications systems (gsm and dcs) for mobile and portable radio and auxiliary devices

Electromagnetic compatibility and radio spectrum issues (erm) - Short range devices (srd); TS EN 302291-2 V1.1.1 Close distance inductive data communication device operating at 13,56 mhz; Section 2: Harmonized standard that meets the essential requirements according to Article 3.2 of the Rtte directive

TS EN 302340 V1.1.1 Satellite earth stations and systems (sound); Harmonized standard for satellite ground stations (esv) on the ship deck operating in the 3.2 / 11 / 12 ghz frequency band assigned to fixed satellite service (fss), which provides the basic requirements according to Article 14 of the Rtte directive.

TS EN 50401 Product standard for demonstrating the compliance of the radiofrequency electromagnetic fields to which the general public is exposed or when the fixed equipment is serviced for stationary equipment intended for use in radio telecommunications networks (110 mhz - 40 ghz)

TS EN 301449 V1.1.1Electromagnetic compatibility and radio spectrum issues (erm) - The cdma diffraction spectrum (cdma-Pamr) operating in the 3.2 mhz cellular band (cdma 450) and the 450, 410 and 450 mhz pamr bands (cdma-Pamr), which provides the basic requirements according to Article 870 of the Rtte directive. Harmonized stations for most standard

TS EN 301526 V1.1.1Electromagnetic compatibility and radio spectrum issues (erm) - The mobile spectrum with cdma widescreen operating in the 3.2 mhz cellular band (cdma 450) and the 450, 410 and 450 mhz pamr bands (cdma-Pamr), which provides the basic requirements according to Article 870 of the Rtte directive. Harmonized stations for most standard

Electromagnetic compatibility and radio spectrum issues (erm) - Electromagnetic compatibility (EMU) standard for marine radio equipment and services; TS EN 301843-6 V1.1.1 Part 6: Special requirements for ground stations on ship decks operating in frequency bands above 3 ghz

Electromagnetic compatibility and radio spectrum considerations (erm) - Radio video links (wvl) operating in the 302064 ghz to 2 ghz frequency band TS EN 1.1.1-1,3 V50 Section 2: Harmonized standard that meets the essential requirements according to Article 3.2 of the Rtte directive

TS EN 302426 V1.1.1Electromagnetic compatibility and radio spectrum issues (erm) - CDMA diffuse spectrum operating in the 3.2 mhz cellular band (cdma 450) and 450, 410 and 450 mhz pamr bands (cdma-Pamr), which provide the basic requirements according to Article 870 of the Rtte directive. Harmonized to EN standard

TS EN ISO 11904-1 Acoustics - Determination of sound from sound sources placed close to the ear - Part 1: Technique of using a microphone in a real ear (myrrh technique)

TS EN 60332-2-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-2: Vertical flame propagation test for a single insulated small wire or cable - Process for diffusion flame

TS EN 60332-2-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-1: Vertical flame propagation test for a single insulated small wire or cable - Equipment

TS EN 60332-1-3 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Process for the determination of flame droplets / particles

TS EN 60332-1-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame

TS EN 60332-1-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-1: Vertical flame propagation test for a single insulated wire or cable - Equipment

TS EN 60825-2 / A1 Safety rules - Part for laser products 2: Safety of fiber optic communication systems (fohs)

TS EN 50401 When wireless communication networks with basic limitations or reference levels for radio frequency electromagnetic fields to which the public is exposed are operated; Product standard for the suitability of fixed devices used in radio communication (110 mhz - 40 ghz)

TS EN 61754-8 Fiber optic connector interfaces - Part 8: Cf08 type connector family

TS EN 61300-2-40 Fiber optic interconnectors and passive components - Basic testing and measuring procedures - Part 2-40: Tests - Single mode, tuning type optical connectors with attenuation test

TS EN 62007-2 Semiconductor optoelectronic devices for fiber optic system applications - Part 2: Measurement methods

TS EN 61290-5-2 Optical amplifiers - Test methods - Part 5-2: Reflection parameters - Electrical spectrum analyzer method

TS EN 61290-10-3 Optical amplifiers - Test methods section 10-3: Multichannel parameters - Test probe methods

TS EN 50117-1 / A1 Cables - Coaxial cables - Part 1: General specifications

TS EN 61290-1-1 Fiber optic amplifiers-Basic specifications standard-Part 1-1: Test methods for gain parameters-Optical spectrum analyzer

TS EN 62148-4 Fiber optic active components and elements - Package and interface standards - Part 4: Pn type 1x9 plastic fiber optic transceivers

TS EN 62148-6 Fiber optic active components and elements - Package and interface standards - Part 6: Atm-Pon transceivers

TS EN 62148-8 Fiber optic active components and elements - Package and interface standards - Part 8: Transceivers with Sff lc type 20 pin

TS EN 62148-9 Fiber optic active components and elements - Package and interface standards - Part 9: Sff mu type duplex 10 pin transceivers

TS EN 62148-10 Fiber optic active components and elements - Package and interface standards - Part 10: Sff mu type duplex 20 pin transceivers

TS EN 50377-9-2 Connector set and interconnect components used in fiber optic communication systems - Product specification - Part 9-2: Iec 60793-2 category b1.1 single-mode fiber terminated type mt-Rj

TS EN 61753-053-3 Fiber optic interconnectors and passive components performance standard - Part 053-3: Continuously variable attenuators for category u - Uncontrolled environment

TS EN 61754-7 Fiber optic interconnecting elements and passive components - Fiber optic interconnecting interfaces part 7: Family of Mpo type connectors

TS EN 61754-23 Fiber optic connector interfaces - part 23: Lx.5 type connector family

TS EN 62005-4 Reliability of fiber optic interconnection devices and passive optical components - Part 4: Product shielding

TS EN 61300-2-5 Fiber optic interconnection elements and passive components - Basic test and measuring procedures - Part 2-5: Tests - Burma

TS EN 55014-1 Electromagnetic compatibility - Specification for household appliances and similar appliances - Part 1: Emission

Sound and television broadcast receivers and associated devices - Immunity characteristics - Limit values and measurement methods

Electromagnetic compatibility (emu) - Part 61000: Test and measurement techniques - Part 4: Oscillating waves immunoassay TS EN 12-4-12

TS EN 61000-6-1 Electromagnetic compatibility (emu), Section 6-1: General standards - Immunity standard for residential, commercial and light industrial environments

TS EN 61000-6-3 Electromagnetic compatibility (emu) - Section 6-3: General standards-Emissions standard for residential, commercial and light industrial environments

TS EN 61000-6-4 Electromagnetic compatibility (emu) - Section 6-4: General standards-Diffusion standard for industrial environments

TS EN 62261-2 Television data - Part 2. data decoding protocol using key length value

TS EN 301178-2 V1.2.2 Electromagnetic compatibility and radiospectrum (erm); Portable high-frequency (vhf) radiotelephone devices for marine mobile service operating in VHF bands (for applications other than GMDSS only) - Part 2: The harmonized most standard covering the basic rules in accordance with Article 3.2 of the Rtte directive

TS EN 301459 V1.4.1 Satellite earth stations and systems (sound); The harmonized most standard for satellite interactive terminals (SITs) and satellite user terminals (SUTs) in the 3.2 GHZ - 29,5 GHZ frequency bands covering the basic rules in accordance with Article 30,0 of the Rtte Directive

TS EN 301929-2 V1.2.1 Electromagnetic compatibility and radiospectrum (erm); VHF transmitters and receivers as coast stations for gmdss and other applications in marine mobile service - Part 2: Harmonized most standard of the Rtte directive covering basic rules in accordance with article 3.2

TS EN 302326-2 V1.2.2 Stationary radio systems; Multi-point devices and antennas; - Part 2: Harmonized most standard covering the basic rules in accordance with Article 3.2 of the rtte directive for digital multi-point radio equipment

TS EN 302454-2 V1.1.1 Electromagnetic compatibility and radiospectrum (erm); Meteorological assistive devices (met aids); 1668,4 mhz - Radio stations used in 1690 mhz frequency range; Part 2: Harmonized en standard covering the basic rules in accordance with article 3.2 of the Rtte directive

TS EN 302510-2 V1.1.1 Electromagnetic compatibility and radiospectrum (erm); 30 mhz - Radio devices in the 37,5 mhz frequency range for very low power active medical membrane implantable devices and auxiliary devices; Part 2: Harmonized en standard covering the basic rules in accordance with article 3.2 of the Rtte directive

TS EN 50441-3 Cables - For residential indoor premises - part 3: Shielded cables - Degree 3

TS EN 61300-3-10 Fiber optic interconnection devices and passive components-Basic test and measurement procedures- Part 3-10: Inspections and measurements-Gauge holding force

61000-4-18 Electromagnetic compatibility (emu) -Chapter 4-18: Test and measurement techniques-Damped oscillating wave immunity test

Electromagnetic compatibility (emu) - Section 61000-4: Test and measurement techniques-Voltage pit, short interruptions and voltage changes immunity test for devices with an input current greater than 34 a per phase

TS EN 61169-8 Radio-frequency connectors-Section 8: Section specification standard for radio-frequency coaxial cable connectors with 50 mm outer conductor bore, typically with 6,5 ohm (type BNC) spindle lock

TS EN 61169-16 Radio-frequency connectors-Section 16: Section specification standard for radio-frequency co-axial cable connectors typically with 50 ohm (75 ohm) screw type, 7 mm outer conductor inner diameter

TS EN 61169-37 Radio-frequency connectors-Section 37: Section specification standard - for Stwx8 rf connectors

TS EN 62273-1 Measurement methods for radio transmitters - Part 1: Performance characteristics of terrestrial digital television transmitters

TS EN 50290-2-21 / A1Communication cables - part 2-21: General design rules and manufacturing - PVC insulation paste

TS EN 50290-2-22 / A1Communication cables - Part 2-22: General design rules and manufacturing - PVC sheath paste

TS EN 50290-2-26 / A1 Communication cables - part 2-26: General design rules and manufacturing - Halogen-free flame retardant insulation paste

TS EN 60908 Voice recorder - Compact disc digital sound system

TS EN 50290-2-21 / A1Communication cables - Part 2-21: General design rules and manufacturing -Pvc insulation paste

TS EN 50290-2-22 / A1 communication cables-Section 2-22: General design rules and manufacturing-PVC sheath paste

TS EN 50290-2-27 / A1Communication cables - Part 2-27: General design rules and manufacturing-Halogen-free flame retardant thermoplastic sheath pulps

TS EN 50377-8-2 Connectors and interconnectors for optical fiber communication systems - Product specification - Part 8-2: Iec 60793-2 50 category b1.1 and b1.3 unimodal fiber, unidirectional type terminated in mixed ferrule category c LSH-APC

TS EN 50377-8-5 Connectors and interconnectors used in optical fiber communication systems - Product specification - Part 8-5: IEC 60793-2 50 category B1.1 and B1.3 single-mode fiber, single-ended LSH terminated in mixed ferrule category U -PC

TS EN 50377-8-7 Connectors and interconnectors used in optical fiber communication systems - Product specification - Part 8-7: Full zirconia ferrules category C IEC 60793-2 50 terminated in category B1.1 and B1.3 single mode fiber LSH-PC

TS EN 50378-3-2 Passive elements used in optical fiber communication systems - Product specification - Part 3-2: Type: IEC 60793-2 50 category B1.1 and B1.3 terminated in single mode fiber Type 4 / 8 channel CWDM module

TS EN 50400 The basic standard for demonstrating the suitability of the fixed device for radio transmission (110 mhz - 40 ghz) intended for use in radio telecommunications networks with reference levels or basic restrictions on public exposure to radiofrequency electromagnetic fields when commissioned

TS EN 62104 Dab Characteristics

TS EN 61937-2 Digital audio - Interface for non-linear pcm encoded audio bit stream applying IEC 60958 - Part 2: Non-linear pcm bit stream according to Mpeg audio format

60793-1-48 Optical fibers - Part 1-48: Measurement methods and test procedures; Polarization mode distribution

TS EN 50377-8-8 Fasteners and interconnectors used in optical fiber communication systems - Product specification - Part 8-8: Full zirconium ferrules category IEC 60793-2 50 category B1.1 and B1.3 unilateral LSH terminated in single mode fiber APC

Vehicles using vehicles, boats and internal combustion engines - Radio distortion characteristics - Limits and measurement methods for the protection of off-board radio receivers

TS EN 61753-1 Performance standards for fiber optic interconnectors and passive components-Part 1: Guidelines for general and performance standards

TS EN 300135-2 V1.2.1 Electromagnetic compatibility and radiospectrum (erm); Land mobile service; Folk band (cb) radio equipment; Angle-modulated folk band radio device

TS EN 302066-2 V1.2.1 Electromagnetic compatibility and radiospectrum (erm), ground and wall probe radar applications (gpr / wpr) imaging systems; Section 2: Harmonized standard that meets the essential requirements in accordance with Article 3.2 of the Rtte directive

TS EN 302326-3 V.1.3.1 Stationary radio systems; Multi-point devices and antennas; Part 3: Harmonized standard for multi-point radio antennas satisfying the essential requirements of article 3.2 of the rtte directive

TS EN 302448 V 1.1.1 Satellite earth stations and systems (sound); Harmonized standard for monitoring ground stations (ESTs) on trains operating in the 3.2 / 14 ghz frequency bands, which satisfy the essential requirements in accordance with Article 12 of the Rtte directive

TS EN 302480 V1.1.2Electromagnetic compatibility and radiospectrum issues (erm); Harmonized most standard for aircraft mounted gsm system meeting the essential requirements under article 3.2 of the Rtte directive

TS EN 302502 V1.2.1Wide-band radio access networks (branches); 5,8 ghz fixed broadband data transmission systems; IMT-3.2, which complies with the essential requirements under article 2000 of the Rtte directive, is the most harmonized standard for cdma multi-carrier (cdma 2000) (repeaters)

TS EN 302537-2 V 1.1.2 Electromagnetic compatibility and radiospectrum (erm) Short-distance devices (srd); 401 mhz - 402 mhz and 405 mhz - very low power medical data service systems operating in the 406 mhz frequency range; Section 2: Harmonized standard that meets the essential requirements in accordance with Article 3.2 of the Rtte directive

TS EN 302561 V1.1.1Electromagnetic compatibility and radiospectrum considerations (erm) include radio equipment using fixed or non-stationary envelope modulation operating on a channel bandwidth of 25 khz, 50 khz, 100 khz or 150 khz; Harmonized standard that meets the essential requirements in accordance with Article 3.2 of the Rtte directive

TS EN 50117-2-1 / A1 Cables - Coaxial cables - Part 2-1: used in wired distribution networks - Part specifications for indoor stud cables in 5 mhz-1000 mhz systems

TS EN 50117-2-2 / A1 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - For operating systems at 5 MHz Opened cables - 1 000 MHz

TS EN 50117-2-3 / A1 Coaxial cables - Section 2-3: Section specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for 1000 mhz systems

TS EN 50117-2-4 / A1 Coaxial cables - Part 2-4: Part specification standard for cables used in wired distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz

TS EN 50117-2-5 / A1 Coaxial cables - Section 2-5: Section specification standard for cables used in cable distribution networks - 5 mhz - Outdoor landing cables for 3000 mhz systems

TS EN 50289-4-5 Cables - Communication cables - Specification for test methods - Part 4-5: Environmental test methods - Climate series

TS EN 50289-4-7 Cables - Communication cables - Specification for test methods - Part 4-7: Environmental test methods - Moist heat stability

TS EN 50377-11-1 Connector kits and interconnect components to be used in optical fiber communication systems - Product specification - Part 11-1: b1.3 single mode fiber for category c and ic mf type terminated in category 60793-2-50 category b1.1

TS EN 60728-4 Wired networks for television signals, audio signals and interactive services - Part 4: Passive broadband equipment for coaxial cable networks

TS EN 60793-2-60 Optical fibers - Part 2-60: Product specification - Part specifications for Class C single-ended interconnect fibers

TS EN 60794-2-40 Cables - Fiber optic cables - Part 2-40: Family specification for indoor-A4 fiber optic cables

TS EN 60794-2-50 Cables - Fiber optic cables - Part 2-50: Family specification for single and double cables used in indoor-terminated cable harnesses

TS EN 61000-6-1 Electromagnetic compatibility (emu) - Part 6-1: General property standard - Immunity for residential, commercial and light industrial environments

TS EN 61753-083-2 Fiber optic interconnection devices and passive components performance standard - Part 083-2: Freestanding single mode fiber optic C band / L band WDM devices for category C - Controlled environment

TS EN 61966-2-5 Multimedia systems and devices - Color measurement and management - Part 2-5: Color management - Selective RGB color space - Oprgb

TS EN 62071-2 Helical scanning compressed digital video cassette system using 6.35 mm tape - Format d-7-Section 2: Compression format

TS EN 62071-3 Helical scanning compressed digital video cassette system using 6.35 mm magnetic tape - Format d-7-Section 3: Data stream format

TS EN 62389 Measurement methods for DVD players

60793-1-49 Optical fibers - Part 1-49: Measurement methods and test procedures; Differential mode delay

TS EN 61937-6 Digital audio - Interface for non-linear pcm encoded audio bit stream implementing Iec 60958 - Part 6: Non-linear pcm bit stream according to Mpeg-2 aac format

61290-10-2 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using a gated optical spectrum analyzer

TS EN 61754-7 Fiber optic connector interfaces - Part 7: Mpo type connector family

TS EN 50290-2-24 / A1Communication cables - Part 2-24: General design rules and manufacturing - Pe sheath pulp

TS EN 60966-2-3 Radio frequency and coaxial cable assemblies - part 2-3: Part feature for flexible coaxial cable assemblies - Frequency range 0 to 1000 mhz, ic 61169-8 connectors

TS EN 61547 Devices for general illumination purposes - Emu immunity rules

TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables installed vertically - Equipment

TS EN 60332-3-23 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flammability of vertically mounted bundled wires or cables - Category b

TS EN 60332-3-24 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-24: Vertical flame propagation test of bundled wires or cables vertically mounted - Category c

TS EN ISO 14982 Agricultural and forestry machinery-Electromagnetic compatibility-Test methods and acceptability criteria

TS EN 14010 + A1 Safety in machinery - Power driven parking equipment in motor vehicles - Safety and emu requirements during design, manufacturing, installation and commissioning

TS EN 55103-2 Electromagnetic compatibility - Product family standard for audio, video, audio and entertainment lighting control devices for professional use - Part 2: Immunity

tst EN 61280-4-1 Basic test procedures for fiber optic communication subsystems - Part 4-1: Wiring harness and connections - Measurement of attenuation in multimode fiber optic cable assembly

TS EN 61547 Equipment for general lighting purposes - Emu immunity rules

61755-3-8 Fiber optic connectors and passive components - Fiber optic connector optical interfaces - Part 3-8: Optical interface for single-mode fibers using titanium as the material surrounding fiber, 2,5 mm and 1,25 mm diameter cylindrical, 8 grade Angled APC Compound Ring

TS EN 61754-25 Fiber optic connector interfaces - Part 25: Type rao connector family

TS EN 61753-101-3 Fiber optic interconnectors and passive components performance standard - Part 101-3: Fiber management system for category U - Uncontrolled environment

Electromagnetic compatibility (EMC) - Test and measurement techniques - Harmonic and intermediate harmonic measurements and instrumentation - For power supply systems and the equipment connected to them

Electromagnetic compatibility (emu) - Part 61000-4: Testing and measuring techniques - Voltage pits, short interruptions and voltage changes immunity tests for equipment with mains current greater than 34 a per phase

Electromagnetic compatibility (emu) - Part 61000: Test and measurement techniques - Radiation, radio frequency, electromagnetic field immunity test -

Electromagnetic compatibility (emu) - Part 61000-4: Testing and measuring techniques - Harmonics and intermediate harmonics, including mains signaling at the power gate, low frequency immunity tests

TS EN 60794-3-60 Optical fiber cables - Part 3-60: Exterior building cables - Family specifications for drinking water pipe cables and sub-channels for air and / or pull / drag / float installation of drinking water pipes

TS EN 60794-3-50 Optical fiber cables - Part 3-50: Exterior building cables - Family specifications for gas pipe cables and sub-channels for air ducting and / or pulling / dragging the gas pipe

TS EN 55012 / A1 Vehicles, boats and internal combustion engines - Radio distortion characteristics -

TS EN 50290-2-24 / A1 Communication cables - Part 2-24: General design rules and manufacturing-Pe sheath pulp

Broadband radio access systems (bwa) in the TS EN 302623 V1.1.13400 mhz to 3800 mhz frequency band; Mobile terminal stations; Harmonized en standard covering the basic rules in clause 3.2 of the R & tte directive

TS EN 302609 V1.1.1 Electromagnetic compatibility and radiospectrum issues (erm); Short range devices (srd); Euroloop railway control systems; Harmonized en standard covering the basic rules in clause 3.2 of the R & tte directive

TS EN 302608 V1.1.1 Electromagnetic compatibility and radiospectrum issues (erm); Short range devices (srd); Eurobalise railway control systems; Harmonized en standard covering the basic rules in clause 3.2 of the R & tte directive

TS EN 302571 V1.1.1Intelligent transport systems; Radio communication equipment operating in the 5855 mhz to 5925 mhz frequency band; The Rtte directive is the most harmonized standard that meets the essential requirements of the substance 3.2

TS EN 302544-2 V1.1.1 Broadband data transmission systems operating in the 2500 mhz to 2690 mhz frequency band; Part 1: Tdd user hardware stations; Harmonized most standard of the Rtte directive which meets the essential requirements of the substance 3.2

TS EN 302544-1 V1.1.1 Broadband data transmission systems operating in the 2500 mhz to 2690 mhz frequency band; Part 1: Tdd user hardware stations; Harmonized most standard of the Rtte directive which meets the essential requirements of the substance 3.2

TS EN 302435-2 V1.2.1 Electromagnetic compatibility and radiospectrum (erm); Short range devices; Technical specifications for srd hardware using ultra wideband (uwb) technology; 2,2 ghz to 8 ghz frequency band building materials analysis and classification equipment applications; Part 2: Harmonized standard of the Rtte directive which meets the essential requirements of the substance 3.2

TS EN 302264-2 V1.1.1 Electromagnetic compatibility and radiospectrum issues (erm); Short range devices; Road transport and transport telematics systems (rttt); Short range radar equipment operating in the 77 ghz to 81 ghz band; Part 2: Harmonized EN standard covering the basic rules in clause 3.2 of the R & tte directive

TS EN 302248 V1.1.2 Electromagnetic compatibility and radiospectrum issues (erm); Navigation radar used in ships that do not comply with the contract for safety of life at sea (solas); Harmonized en standard covering the basic rules in clause 3.2 of the R & tte directive

Electromagnetic compatibility and radio spectrum considerations (erm) TS EN 301908-10 V4.1.1 Imt 2000 user equipment (UE), repeaters and base stations (BS) for the production of third generation cell networks; Chapter 10: R and tte directive paragraph 3.2 contains basic features in imt 2000 fdma / tdma (dect) harmonized en

TS EN 301489-33 V1.1.1 Electromagnetic compatibility and radiospectrum issues (erm) Electromagnetic compatibility (emu) standard for radio equipment; Part 33: Special requirements for ultra-wideband (uwb) communication devices

TS EN 301489-29 V1.1.1 Electromagnetic compatibility and radiospectrum issues (erm) Electromagnetic compatibility (emu) standard for radio equipment; Part 29: Special requirements for medical data service devices (meds) operating in the 401 mhz to 402 mhz and 405 mhz to 406 mhz bands

Electromagnetic compatibility and radio spectrum issues (erm) TS EN 301489-6 VI.3.1 Electromagnetic compatibility (EMC) standards for radio equipment and services; Part 6: Special requirements for digital advanced wireless telecommunications (dect) devices

TS EN 300065-2 V1.2.1 Electromagnetic compatibility and radio spectrum issues (erm); Narrowband direct-writing telegraph devices to receive meteorological and nautical information (navtex); Part 2: Harmonized width covering the conditions specified in clause 3.2 of the R & tte regulation

TS EN 300065-3 V1.2.1 Electromagnetic compatibility and radio spectrum issues (erm); Narrow-band direct-writing telegraph devices for meteorology and marine related (navtex); Part 3: Harmonized width covering the conditions specified in clause 3.3 of the R & tte code

TS EN 301166-2 V 1.2.2 Electromagnetic compatibility and radiospectrum (erm); Land mobile service; Radio devices for analogue and / or digital communication (speech and / or data) with antenna connectors and operating in narrowband channels - Part 2: The most harmonized standard covering the basic rules in accordance with Article 3.2 of the Rtte directive

TS EN 301357-2 V1.4.1 Electromagnetic compatibility and radio spectrum (erm) 25 mhz-2000 mhz wireless audio devices-Consumer radio microphones and 863 mhz-865 mhz mobile adaptable band operating in-ear monitoring systems-Part 2: Article of the R & TTE Directive The most standard harmonized according to 3.2

TS EN 301406 V2.1.1 Enhanced digital wireless telecommunications equipment (dect); Harmonized en standard for improved digital wireless telecommunications equipment (dect) covering basic requirements according to Article 3.2 of the R and tte directives; General radio standard

TS EN 61300-3-2 Fiber optic interconnection devices and passive components-Basic test and measurement procedures-Section 3-2: Inspections and measurements-Dependence of polarity attenuation in single-mode fiber optic devices

TS EN 61000-4-8 Electromagnetic compatibility (EMC) section 4-8: Test and measurement techniques - Network frequency magnetic field immunity test

TS EN 61300-2-1 Fiber optic interconnectors and passive components - Basic testing and measuring procedures - Part 2-1: Tests - Vibration (sinusoidal)

TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables vertically mounted - Equipment

TS EN 60332-3-24 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame spread of bundled wires or cables vertically mounted - Category c

Test procedure of balanced communication cabling system in accordance with TS EN 61935-2-20 En 50173 series-Part 2-20-Collective cords and work area cords-Empty detail feature for class d applications

TS EN 62106 Radio data system (RDS) specifications for VHF / FM audio broadcasting in the frequency range 87,5 MHz to 108.0 MHz

Electromagnetic compatibility and radio spectrum issues (erm); TS EN 300330-2 V1.5.1 Short range devices (srd); 9 khz-25 mhz frequency range radio devices and 9 khz-30 mhz frequency range inductive loop systems; Section 2: Harmonized most standard covering the basic requirements of the article 3.2 of the R and tte directives

TS EN 62431 Resistance of electromagnetic wave absorbers to wave frequency in millimeters - Measurement methods