Telecommunications Audio and Video Engineering, Coaxial Cables, Waveguide Standards

Coaxial Cables We provide services focused on finalizing the tests with our fully equipped equipment for the following standards in testing, inspection and certification services.

TS EN 61196-3-3 Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal ground wiring - Detailed communication specifications for foam dielectric coaxial cables in local area networks up to 185 m in length and with a speed of 10 mb / s

TS EN 61580-4 Measurement methods for waveguides - Part 4: Reduction of waveguides and waveguides

TS EN 61580-6 Measurement methods for waveguides - Part 6: Return loss on waveguides and waveguides

TS EN 50289-3-9 Cables - Communication cables - Specification for test methods - Part 3-9: Mechanical test methods - Bending tests

TS EN 50117-1 Cables - Coaxial cables - Part 1: General specifications

TS EN 50289-1-3 Communication cables for test methods - Specification - Part 1-3: Electrical test methods - Dielectric strength

TS EN 50289-1-4 Communication cables - Specification for test methods - Part 1-4: Electrical test methods - Insulation resistance

TS EN 50289-1-5 Communication cables - Specification for test methods - Part 1-5: Electrical test methods - Capacitance

TS EN 50289-1-7 Communication cables - Specification for test methods section 1-7: Electrical test methods - Spreading speed

TS EN 50289-3-1 Communication cables - Specification for test methods - Part 3-1: Mechanical test methods - General specifications

TS EN 50289-3-11 Communication cables - Specification for test methods - Part 3-11: Mechanical test methods - Resistance of the cable to insulation from cutting

TS EN 50289-3-12 Communication cables - Specification for test methods - Part 3-12: Mechanical test methods - Nuisance damage

TS EN 50289-3-16 Communication cables - Specification for test methods - Part 3-16: Cable pull performance

TS EN 50289-3-2 Communication cables - For test methods - Specification - Part 3-2: Mechanical test methods - Tensile strength and elongation for conductors

TS EN 50289-3-4 Communication cables - Specifications for test methods section 3-4: Mechanical test methods-Tensile strength, elongation and shrinkage of insulation and sheath

TS EN 50289-3-6 Communication cables - Specification for test methods - Part 3-6: Mechanical test methods - Impact resistance of the cable

TS EN 50289-3-9 Communication cables - Specification for test methods - Part 3-9: Mechanical test methods - Bending tests

TS EN 50289-4-1 Cables-Communication cables-Specifications for test methods-Part 4-1: Environmental test methods-General specifications

TS EN 50289-4-2 Communication cables - Specification for test methods - Part 4-2: Environmental tests water penetration

TS EN 50289-4-6 Communication cables - Specification for test methods - Part 4-6: Environmental test methods - Temperature cycle

TS EN 50117-3-1 Coaxial cables - Part 3-1: Related requirements for cables used in communication applications-Miniaturized cables used in digital communication

TS EN 50290-2-24 Communication cables-Part 2-24: General design rules and manufacturing-Pe sheath pulp

TS EN 50290-2-26 Communication cables - Part 2-26: General design rules and manufacturing-Halogen-free flame retardant insulation paste

TS EN 50290-2-27 Communication cables - Part 2-27: General design rules and manufacturing-Halogen-free flame retardant thermoplastic sheath pulps

TS EN 50290-2-28 Communication cables - Part 2-28: General design rules and manufacturing-Filling dough for filled cables

TS EN 50290-2-29 Communication cables - Part 2-29: General design rules and manufacturing-Cross-linked PE insulation paste

TS EN 50290-2-30 Communication cables - Part 2-30: General design rules and manufacturing - Poly (tetrafluoroethylene-hexafluoropropylene) (fep) insulation and sheath paste

TS EN 50289-1-6 Communication cables - Specification for test methods - Part 1-6: Electrical test methods-Electromagnetic performance

TS EN 50289-1-10 Communication cables-Specifications for test methods-Part 1-10: Electrical test methods-Crosstalk

TS EN 50289-3-17 Communication cables - Specification for test methods - Part 3-17: Mechanical test methods-Dielectric adhesion and sheath

TS EN 50289-4-9 Communication cables - Specification for test methods - Part 4-9: Environmental test methods-Weather resistance

TS EN 50290-2-20 Communication cables - Part 2-20: General design rules and manufacturing-General

TS EN 50290-2-21 Communication cables - Part 2-21: General design rules and manufacturing-PVC insulation paste

TS EN 50290-2-22 Communication cables-Part 2-22: General design rules and manufacturing-PVC sheath paste

TS EN 50117-3-1 Cables - Coaxial cables - Part 3-1: Part specifications of cables used in telecommunications applications - Miniaturized cables used in digital communication systems

TS EN 50289-3-17 Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods - Adhesion of dielectric and sheath

TS EN 50289-4-9 Cables - Communication cables - Specification for test methods - Part 4-9: Environmental test methods - Pneumatic durability

50288-5-2 Multi-element metal cables for analog and digital communication and control - Section 5-2: Section specification standard for screened cables up to 250 mhz; Work area and patch beam cables

TS EN 50289-3-13 Communication cables - Requirements for test methods - Part 3-13: Mechanical test methods - Wind vibration.

50288-4-2 Multi-element metal cables for analog and digital communication and control - Section 4-2: Section specification standard for screened cables up to 600 mhz; Work area and patch beam cables

TS EN 50407-1 End-user multi-pair cables used in high bit rate telecommunications networks - Part 1: Outdoor cables

TS EN 50117-2-2 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - Open operating cables for operating systems at 5 MHz - 1 000 MHz

TS EN 50117-2-3 Coaxial cables - Part 2-3: Part specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for systems running on 1000 mhz

TS EN 50117-2-4 Coaxial cables - Part 2-4: Part specification standard for cables used in cable distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz

TS EN 50117-2-5 Coaxial cables - Part 2-5: Part specification standard for cables used in wired distribution networks - 5 mhz - Outdoor landing cables for systems operating on 3000 mhz

TS EN 50406-2 End-user multi-pair cables used in high bit rate telecommunications networks - Part 2: Trough and flush cables

TS EN 50406-1 End-user multi-pair cables used in high bit rate telecommunications networks - Part 1: Overhead cables

TS EN 50288-7 Multi-element metal cables for analog and digital communication and control - Part 7: Part specification standard for instrumentation and control cables

TS EN 50290-2-1 Communication cables - Part 2-1: Common design rules and construction

TS EN 50117-2-1 Cables - Coaxial cables - Part 2-1: Part specifications for indoor stud cables used in wired distribution networks - 5 mhz-1000 mhz systems

TS EN 50117-1 / A1 Cables - Coaxial cables - Part 1: General specifications

TS EN 50290-2-21 / A1 Communication cables - part 2-21: General design rules and manufacturing - PVC insulation paste

TS EN 50290-2-22 / A1 Communication cables - Part 2-22: General design rules and manufacturing - PVC sheath paste

TS EN 50290-2-26 / A1 Communication cables - part 2-26: General design rules and manufacturing - Halogen-free flame retardant insulation paste

TS EN 50290-2-21 / A1 communication cables-Section 2-21: General design rules and manufacturing-PVC insulation paste

TS EN 50290-2-22 / A1 communication cables-Section 2-22: General design rules and manufacturing-PVC sheath paste

TS EN 50290-2-27 / A1 Communication cables - Part 2-27: General design rules and manufacturing-Halogen-free flame retardant thermoplastic sheath pulp

TS EN 50117-2-1 / A1 Cables - Coaxial cables - Part 2-1: used in wired distribution networks - Part specifications for indoor stud cables in 5 mhz-1000 mhz systems

TS EN 50117-2-2 / A1 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - For operating systems at 5 MHz Opened cables - 1 000 MHz

TS EN 50117-2-3 / A1 Coaxial cables - Section 2-3: Section specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for 1000 mhz systems

TS EN 50117-2-4 / A1 Coaxial cables - Part 2-4: Part specification standard for cables used in wired distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz

TS EN 50117-2-5 / A1 Coaxial cables - Section 2-5: Section specification standard for cables used in cable distribution networks - 5 mhz - Outdoor landing cables for 3000 mhz systems

TS EN 50289-4-5 Cables - Communication cables - Specification for test methods - Part 4-5: Environmental test methods - Climate series

TS EN 50289-4-7 Cables - Communication cables - Specification for test methods - Part 4-7: Environmental test methods - Moist heat stability

TS EN 50290-2-24 / A1 Communication cables - Part 2-24: General design rules and manufacturing - Pe sheath pulp

TS EN 60966-2-3 Radio frequency and coaxial cable assemblies - part 2-3: Part feature for flexible coaxial cable assemblies - Frequency range 0 to 1000 mhz, ic 61169-8 connectors

TS EN 50290-2-24 / A1 Communication cables - Part 2-24: General design rules and manufacturing-Pe sheath pulp

Test procedure of balanced communication cabling system in accordance with TS EN 61935-2-20 En 50173 series-Part 2-20-Collective cords and work area cords-Empty detail feature for class d applications

TS EN 62431 Resistance of electromagnetic wave absorbers to wave frequency in millimeters - Measurement methods

TS EN 50290-2-27: 2003 / A1: 2008 / AC Communication cables - Part 2-27: General design guidelines and manufacturing - Halogen-free flame retardant thermoplastic sheath pulp

TS EN 61935-2 General wiring systems - Test of balanced communication wiring according to ISO / IEC 11801

TS EN 50288-8 Multi-element metallic cables for analog and digital communication and control - Part 8: Rules for type 2 cables characterized up to 1 MHz

TS EN 50289-4-16 Cables - Communication cables - Specification for test methods - Environmental test methods - Part 4-16: Protection of circuit integrity in fire conditions

TS EN 50288-9-1 Cables - multi-element metallic cables for analog and digital communication and control - Part 9-1: Part specification standard for screened cables with specified specifications up to 1000 MHz-Horizontal and building cables.

TS EN 50288-11-1 Cables - multi-element metallic cables for analog and digital communication and control - Part 11-1: Part specification standard for screened cables with specified specifications up to 500 MHz-Horizontal and building cables.

TS EN 50117-2-5 / AC Coaxial cables - Section 2-5: Section specification standard for cables used in wired distribution networks - 5 mhz - Outdoor landing cables for systems operating on 3000 mhz

TS EN 50288-10-1 Multi-element metal cables for analog and digital communication and control - Part 10-1: Part specification standard for screened cables with specified specifications up to 500 Hz - Horizontal and building main backbone cables

TS EN 50117-4-1 Coaxial cables - Part 4-1: Part specifications of the cables for bct wiring according to EN 50173 - 5 mhz-3000 MHz installed systems for indoor cables

TS EN 62037-2 Passive RF and microwave elements, intermediate modulation level meters - Part 2: Measurement of passive intermediate modulation in coaxial cable installations

TS EN 50288-1 Multi-element metal cables for analog and digital communication and control - Part 1: General features

TS EN 50117-1 / A2 Coaxial cables - Part 1: General specifications

TS EN 50117-4-1 / A1 Coaxial cables - Part 4-1: Wiring in accordance with EN 50173 Sectional specifications for cables for BCT - Closed drop cables for operating systems in 5 MHz - 3 000 MHz

TS EN 50288-2-1 Multi-element metallic cables for analog and digital communication and control circuits - Part 2-1: Specification for shielded cables characterized up to 100 mhz - Horizontal and building cables

TS EN 50117-2-1 / A2 Coaxial cables - Part 2-1: Part specifications for indoor stud cables used in wired distribution networks - 5 mhz-1000 mhz systems

TS EN 50117-2-2 / A2 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - For operating systems at 5 MHz Opened cables - 1 000 MHz

TS EN 50117-2-3 / A2 Coaxial cables - Section 2-3: Section specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for 1000 mhz systems

TS EN 50117-2-4 / A2 Coaxial cables - Part 2-4: Part specification standard for cables used in wired distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz

TS EN 50117-2-5 / A2 Coaxial cables - Section 2-5: Section specification standard for cables used in cable distribution networks - 5 mhz - Outdoor landing cables for 3000 mhz systems

TS EN 50289-3-8 Communication cables - Specification for test methods section 3-8: Mechanical test methods-Abrasion resistance of cable jacket markings

TS EN 50290-2-23 Communication cables - Part 2-23: General design rules and manufacturing-Pe insulation paste

TS EN 50290-2-25 Communication cables - Part 2-25: General design rules and manufacturing-Polypropylene insulation paste

TS EN 50601 General wiring systems - Shielded flat patch cable and flat working area cords for class D applications - - Detailed specifications Specification for balanced communication wiring test in EN 50173-4 framework

TS EN 50602 General wiring systems - Specification for balanced communication wiring testing in the framework of EN 50173-4 - Display flat patch cable and flat working area cords for class E applications - Detailed specifications

TS EN 50603 General wiring systems - For balanced communication wiring test in EN 50173-4 - Specification for class E applications Flat patch cord and flat working area cords with shielding - Detailed specifications

TS EN 61580-7 Measurement methods for waveguides - Part 7: Graphical method for determining the performance of waveguides

TS EN 50289-1-10 Cables - Communication cables - Specifications for test methods - Part 1-10: Electrical test methods - Diaphony

TS EN 60728-1-2 Cable networks for television beacons, audio beacons and interactive services - Part 1-2: Performance requirements for beacons transmitted at the operating system exit

TS EN 50407-3 Multi-pair cables with high bit rate digital access for use in communication networks - Part 3: Indoor services up to 100 MHz supporting universal services for up to 100 m connection lengths, applications up to 100 Mbit / s on xDSL and IP multipair / quadruple vertical cables

TS EN 50599 General cabling systems - Specification for balanced communication cabling tests in accordance with EN 50173-4 - Screened flat connection cords and flat working area cords for Class D applications - Detail standard

50117-2-1 / tst A2 Coaxial cables - Part 2-1: Part used for indoor stud cables in systems running on 5 mhz-1000 mhz

Coaxial cables - Part 50117-2: for cables used in wired distribution systems Sectional specification - Opened cables for operating systems at 2 MHz - Opened cables - 2 2 MHz TS EN 2-5-1

TS EN 50117-2-3 / tst A2 Coaxial cables - Part 2-3: Part specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for 1000 mhz systems

TS EN 50117-2-4 / tst A2 Coaxial cables - Part 2-4: Part specification standard for cables used in wired distribution networks - 5 mhz - Indoor landing cables for 3000 mhz systems

TS EN 50117-2-5 / tst A2 Coaxial cables - Section 2-5: Section specification standard for cables used in wired distribution networks - 5 mhz - Outdoor landing cables for 3000 mhz systems

TS EN 50288-7 Multi-element metallic cables for analog and digital communication and control - Part 7: Part specification standard for measuring and control cables

tst EN 50289-3-8 Communication cables-Specifications for test methods section 3-8: Mechanical test methods-Wear resistance of cable jacket markings

tst EN 50290-2-23 Communication cables-Section 2-23: General design rules and manufacturing-Pe insulation paste

tst EN 50290-2-25 Communication cables - Part 2-25: General design rules and manufacturing-Polypropylene insulation paste

tst EN 50407-3 Multi-pair cables with high bit rate digital access for use in communication networks - Part 3: Universal services for up to 100 m connection lengths, 100 MHz up to 100 Mbit / s on xDSL and IP applications multipair / quadruple vertical cables

tst EN 50599 General cabling systems - Specification for balanced communication cabling tests in accordance with EN 50173-4 - Screened flat connection cords and flat working area cords for Class D applications - Detail standard

TS EN 50290-4-2 Communication cables - Part 4-2: General considerations for the use of cables - User guide

TS EN 50290-4-1 Communication cables - Part 4-1: General considerations for the use of cables - Environmental requirements and safety regulations

TS EN 61196-10-1 Coaxial communication cables - Part 10-1: standard for empty detail specification for semi-rigid cables containing polytetraflurethylene (PTFE) dielectrics

tst EN 50288-1 Multi-element metal cables used in analogue and digital communication and control - Part 1: General features

TS EN 50288-10-2 Multi-element metal cables for analog and digital communication and control - Part 10-2: Part specification standard for screened cables with specified specifications from 1 MHz to 500 MHz - part cable for workspace and data center applications

TS EN 50288-11-2 Cables - multi-element metallic cables for analog and digital communication and control - Part 11-2: Part specification standard for screened cables with specified specifications from 1 MHz to 500 MHz - for workspace and data center applications track cable

TS EN 50288-9-2 Cables - multi-element metallic cables for analog and digital communication and control - Part 9-2: Part specification standard for screened cables with specified specifications from 1 MHz to 1000 MHz - for workspace and data center applications track cable

TS CLC / EN 50117-8 Coaxial cables - Part 8 used in cable distribution networks: Repairing and replacing damaged buried cables

TS EN 50117-2-2 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - Open operating cables for operating systems at 5 MHz - 1 000 MHz

TS EN 50117-2-2 / A1 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - For operating systems at 5 MHz Opened cables - 1 000 MHz

50288-4-1 Multi-element metal cables for analog and digital communication and control - Section 4-1: Section specification standard for screened cables up to 600 mhz; Horizontal and building main spine cables

TS EN 50290-2-21 / A1 / AC Communication cables - part 2-21: General design rules and manufacturing - PVC insulation paste

TS EN 50290-2-21 / AC Communication cables - part 2-21: General design rules and manufacturing - PVC insulation paste

TS EN 50289-1-3 Communication cables for test methods - Specification - Part 1-3: Electrical test methods - Dielectric strength

TS EN 50289-1-4 Communication cables - Specification for test methods - Part 1-4: Electrical test methods - Insulation resistance

TS EN 50289-3-10 Communication cables - Requirements for test methods - Part 3-10: Mechanical test methods - Bending and torsion

TS EN 50289-3-13 Communication cables - Requirements for test methods - Part 3-13: Mechanical test methods - Wind vibration.

TS EN 50289-4-16 Cables - Communication cables - Specification for test methods - Environmental test methods - Part 4-16: Protection of circuit integrity in fire conditions

TS EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric

TS EN 50289-4-17 Communication cables - Requirements for test methods - Part 4-17: Test methods for UV resistance of sheaths of electrical and optical cables

TS EN 61726 Wiring harnesses and passive microwave components - Shielding attenuation measurements with reflective chamber method

TS EN 50117-4-2 Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cable distribution networks

TS EN 60966-2-7 Radio frequency and coaxial cable assemblies - Part 2-7: Detailed specification for cable assemblies for radio and television receivers - Frequency range 0 MHz 000 MHz 3, IEC 61169-47 connectors

TS EN 62153-4-7 Fiber optic connector optical interfaces - Part 2-1: Optical interface standard for angular (perpendicular) single mode fibers with physical contact

TS EN 60966-2-4 Radio frequency and coaxial cable assemblies - Part 2-4: Detailed specifications of cable assemblies for radio and tele-receiver receivers (0 to 3000 mhz, ic 60169-2 connectors)

tst 2017114354 Cables - Halogen free and fire resistant signal and control cables

TS EN 60153-1 Hollow metallic waveguides - Part 1: General requirements and measurement methods

TS EN 60153-2 Hollow metallic waveguides - Part 2: Related specifications for ordinary rectangular waveguides

TS EN 60154-1 Flanges for waveguides - Part 1: General requirements

TS EN 60154-2 Flanges for waveguides - Part 2: Specification for fasteners for normal rectangular waveguides

TS EN 50289-1-11 Communication cables-Specifications for test methods section 1-11: Electrical test methods-Characteristic impedance, input impedance, return loss

TS EN 60966-2-5 Radio frequency and coaxial cable assemblies - Part 2-5: Detailed specifications for cable assemblies for radio and television receivers - Frequency range 0 to 1000 mhz

TS EN 60966-2-6 Radio frequency and coaxial cable assemblies - Part 2-6: Detailed specifications for cable assemblies for radio and television receivers - Frequency range 0 to 3000 mhz

TS EN 50289-1-1 Communication cables - Specification for test methods - Part 1-1: Electrical test methods - General specifications

TS EN 50289-1-8 Communication cables - Specification for test methods - Part 1-8: Electrical test methods - Attenuation

TS EN 50289-1-9 Communication cables - Specification for test methods - Part 1-9: Electrical test methods-Unbalanced attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)

TS EN 60153-1 / AC Hollow metallic waveguides - Part 1: General requirements and measurement methods

TS EN 60153-2 / AC Hollow metallic waveguides - Part 2: Related specifications for ordinary rectangular waveguides

TS EN 50289-3-8 Communication cables - Specification for test methods section 3-8: Mechanical test methods-Abrasion resistance of cable jacket markings

TS 8450 EN ISO 1163-2 tires-Non-plasticizing poly (vinyl chloride) (pvc-U) molding and extrusion materials-Part 2: Preparation of test pieces and determination of properties

TS EN 60966-3-2 Radio frequency and coaxial cable harness - Part 3-2: Detail specification standard for semi-flexible coaxial cable harnesses used in GSM

TS EN 50289-4-2 Cables - Communication cables - Specification for test methods - Part 4-2: Environmental test methods - Water penetration

TS EN 50289-1-12 Communication cables-Requirements for test methods-Section 1-12: Electrical test methods-Inductance

TS EN 50289-1-6 Cables - Communication cables - Specification for test methods - Part 1-6: Electrical test methods - Electromagnetic performance

TS EN 50289-3-5 Communication cables - Specification for test methods section 3-5: Mechanical test methods-Crush resistance of cable

TS EN 50289-3-7 Communication cables - Specification for test methods section 3-7: Mechanical test methods-Wear resistance of cable jacket

TS EN 50289-4-4 Cables - Communication cables - Specification for test methods - Part 4-4: Environmental test methods - Resistance to solvents and contaminating liquids

TS EN 50289-4-6 Cables - Communication cables - Specifications for test methods - Part 4-6: Environmental test methods - Temperature cycle

TS EN 50289-3-16 Cables - Communication cables - Specification for test methods - Part 3-16: Mechanical test methods - Cable drawing performance

TS EN 50289-4-11 Communication cables-Test methods for test methods-Part 4-11: Environmental test methods-Integrated horizontal fire test method

TS EN 50289-3-11 Cables - Communication cables - Specification for test methods - Part 3-11: Mechanical test methods - Resistance of the cable to in-cut

TS EN 50289-3-12 Cables - Communication cables - Specification for test methods section 3-12: Mechanical test methods - Nonsense damage

TS EN 50289-1-13 Communication cables - Requirements for test methods - Part 1-13: Electrical test methods - Coupling attenuation or shielding attenuation of cables / component cords / coaxial cables previously connected by connector

TS EN 50289-1-14 Communication cables - Requirements for test methods - Part 1-14: Electrical test methods - Coupling or shielding weakening of connected equipment

TS EN 50289-1-15 Communication cables - Requirements for test methods - Part 1-15: Electromagnetic performance - Coupling attenuation of ducts or connections (laboratory conditions)

TS EN 50289-1-16 Cables - Communication cables - Specification for test methods - Part 1: 16: Electromagnetic performance - Coupling attenuation of cable harnesses

TS EN 50289-3-10 Communication cables - Requirements for test methods - Part 3-10: Mechanical test methods - Bending and torsion

TS EN 50289-3-15 Communication cables - Requirements for test methods - Part 3-15: Mechanical test methods - Resistance of the underwater cable against hydrostatic pressure / Note: It is applied together with En 50289-3-1.

TS EN 50289-4-14 Communication cables-Requirements for test methods-Section 4-14: Environmental test methods-Illumination / note: En applies in conjunction with 50289-3-1.

TS EN 50289-4-12 Communication cables - Requirements for test methods - Part 4-12: Environmental test methods - Vertical flame propagation test in small bundled communication cables

TS EN 50290-1-1 Communication cables - Part 1-1: General

TS EN 50290-1-2 Communication cables - Part 1-2: Definitions

TS EN 60966-1 Radio frequency and coaxial cable sets-Section 1: General specifications-General requirements and test methods

TS EN 60966-3: 2009 Radio frequency - Coaxial cable harnesses - Part 3: Section characteristics for semi-rigid coaxial cable harnesses

TS EN 60966-4 Radio frequency - Coaxial cable harnesses - Part 4: Section characteristics for semi-rigid coaxial cable harnesses

TS EN 60966-2-2 Radio frequency and coaxial cable fittings - Part 2 - 2: Blank detail specifications for flexible coaxial cable fittings

TS EN 60966-3-1: 2009 Radio frequency - Coaxial cable harnesses - Part 3-1: Empty detail specifications for semi-rigid coaxial cable harnesses

TS EN 60966-4-1 Radio frequency - Coaxial cable harnesses - Part 4-1: Blank detail specifications for semi-rigid coaxial cable harnesses

TS EN 60966-2-1 Radio frequency and coaxial cable assemblies - part 2-1: Part feature for flexible coaxial cable assemblies

TS EN 61196-3 Radio frequency cables - Part 3: Cross-section of coaxial cables for local networks

TS EN 61196-2 Cables - Radio-frequency cables - Part 2: Part specifications for polytetrafluoroethylene (ptfe) insulated semi-rigid radio frequency and coaxial cables

TS EN 61196-3-3 Cables - Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor installations - Detail specification for local area networks up to 185 m and up to 10 mb / s

TS EN 61196-3-2 Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal ground wiring - Detailed communication specifications for foam dielectric coaxial cables in local area networks up to 185 m in length and speed 10 mb / s

TS EN 61196-4 Coaxial communication cables - Part 4: Specification for radiating cables

TS EN 61338-2 Waveguide dielectric resonators - Part 2: Guidelines for oscillator and filter applications

TS EN 61338-1-3 Waveguide type dielectric renzonators - Part 3: General information and test conditions - Complex relative permeability measurement method for dielectric resonator materials at microwave frequency (ic 61338 -1-3: 1999)

TS EN 61338-1 Waveguide type dielectric renzonators - Part 3: General information and test conditions - Complex relative permeability measurement method for dielectric resonator materials at microwave frequency

TS EN 61338-1-4 Waveguide-type dielectric resonators - Part 1-4: General information and test conditions - Complex relative permeability measurement method for dielectric resonator materials of millimeter wave frequency

TS EN 61580-1 Measurement methods for waveguides - Part 1: Separation and rotation of the polarization plane

TS EN 61580-2 Measurement methods for waveguides-Part 2: Level of Inter-Modulation products

TS EN 61580-3 Measurement methods for waveguides - Part 3: Change of group delay

TS EN 61580-8 Measurement methods for waveguides - Part 8: Energy holding capacity of waveguides

TS EN 61580-9 Measurement methods for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces

TS EN 61935-3 Test procedure of a balanced and coaxial information technology cabling system - Wiring installed as specified in Part 3-En 50173 and related standards

TS EN 61935-1 General wiring systems - Specification for wiring tests according to ISO / IEC 801 - Part 1: Installed wiring

TS EN 62153-1-1 Test methods of metallic communication cables - Part 1-1: Measurement of pulse / step return loss in the frequency domain using electrical-inverse different fourier transform (idft) (ic 62153-1: 2003)

TS EN 62153-4-2 Test methods of metallic communication cables - Part 4-2: Electromagnetic compatibility (emu) - Screening and coupling attenuation - Injection clamp method (IEC 62153-4-2: 2003 / note: Approval information