Fibers and Cables We carry out the test, audit and certification processes by performing the tests specified in the following standards by applying all technical tests related to the regulations.
TS EN 61269-1-1 Fiber optic terminal sets - Empty detail tests
TS EN 60793-1-21 Fiber optics-Section 1-21: Measurement methods and test procedures-Coating geometry (ic 60793-1-22: 2001)
TS EN 60793-1-22 Fiber optics-Section 1-21: Measurement methods and test procedures-Length measurement (ie 60793-1-22: 2001)
TS EN 60793-1-33 Optical fibers - Part 1-33: Measurement methods and test procedures-Sensitivity to tensile corrosion
60793-1-46 Fiber optics-Section 1-46: Measurement methods and test procedures; Monitoring the change in optical transition.
TS EN 187103 Family property standard - Fiber optic cables for indoor applications
TS EN 60793-1-40 Optical fibers - Part 1- 40: Measurement methods and test procedures - Attenuation
60793-1-45 Optical fibers - Part 1- 45: Measurement methods and test procedures - Mode field diameter
TS EN 60794-4 Optical fiber cables - Part 4: Part specification standard; Overhead optical cables parallel to power lines
TS EN 60332-1-1 Electrical and optical fiber cable tests at risk of fire - Part 1-1: Vertical flame propagation test for insulating single wire and fiber cable - Apparatus
TS EN 60332-1-2 Tests for electrical and optical fiber cables at risk of fire - Part 1-2: Vertical flame propagation test for insulating single wires and fiber cables
TS EN 60332-1-3 Fire and electrical fiber optic cable tests - Part 1-3: Vertical flame propagation test for insulating single wire and fiber cable
TS EN 60332-2-1 Tests for electrical and optical fiber cables at risk of fire - Part 2-1: Vertical flame propagation test for insulating small single copper wire and fiber cable - Apparatus
TS EN 60332-2-2 Electrical and optical fiber cable tests at risk of fire - Part 2-2: Vertical flame propagation test for insulating small single wire and fiber cable - Procedure for spreading flame
TS EN 62150-1 Fiber optic active elements and circuits - Test and measuring procedures - Part 1: General and guidance
TS EN 60332-2-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-2: Vertical flame propagation test for a single insulated small wire or cable - Process for diffusion flame
TS EN 60332-2-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 2-1: Vertical flame propagation test for a single insulated small wire or cable - Equipment
TS EN 60332-1-3 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Process for the determination of flame droplets / particles
TS EN 60332-1-2 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Process for 1 kw premixed flame
TS EN 60332-1-1 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 1-1: Vertical flame propagation test for a single insulated wire or cable - Equipment
60793-1-48 Optical fibers - Part 1-48: Measurement methods and test procedures; Polarization mode distribution
TS EN 60793-2-60 Optical fibers - Part 2-60: Product specification - Part specifications for Class C single-ended interconnect fibers
TS EN 60794-2-40 Cables - Fiber optic cables - Part 2-40: Family specification for indoor-A4 fiber optic cables
TS EN 60794-2-50 Cables - Fiber optic cables - Part 2-50: Family specification for single and double cables used in indoor-terminated cable harnesses
60793-1-49 Optical fibers - Part 1-49: Measurement methods and test procedures; Differential mode delay
TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables installed vertically - Equipment
TS EN 60332-3-23 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-23: Test for vertical flammability of vertically mounted bundled wires or cables - Category b
TS EN 60332-3-24 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-24: Vertical flame propagation test of bundled wires or cables vertically mounted - Category c
TS EN 60794-3-60 Optical fiber cables - Part 3-60: Exterior building cables - Family specifications for drinking water pipe cables and sub-channels for air and / or pull / drag / float installation of drinking water pipes
TS EN 60794-3-50 Optical fiber cables - Part 3-50: Exterior building cables - Family specifications for gas pipe cables and sub-channels for air ducting and / or pulling / dragging the gas pipe
TS EN 60332-3-10 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-10: Test for vertical flame spread of bundled wires or cables vertically mounted - Equipment
TS EN 60332-3-24 Cables - Tests for electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame spread of bundled wires or cables vertically mounted - Category c
tst EN 61280-4-1 Basic test procedures for fiber optic communication subsystems - Part 4-1: Wiring harness and connections - Measurement of attenuation in multimode fiber optic cable assembly
TS EN 60794-3-11 Fiber optic cables - Part 3-11: Outdoor cables - Product specifications for single mode fiber optic communication cables directly embedded in and connected to the duct
TS EN 60794-2-30 Cables - Fiber optic cables - Part 2-30: Indoor cables - Family standard for ribbon cables
60793-1-1 Optical fibers - Part 1-1: Measurement methods and test procedures - General and guidance
TS EN 60794-3-30 Fiber optic cables - Part 3-30: Non-building cables - Family specification for fiber optic communication cables for lakes and rivers
TS EN 62614 Fiber optics - Features of launch status for measuring attenuation in multimode fiber optic cable assembly
60793-1-41 Optical fibers - Part 1- 41: Measurement methods and test procedures - Band width
60793-1-32 Optical fibers - Part 1-32: Measurement methods and test procedures - Detachability of coating
TS EN 60794-2-30 Fiber optic cables - Part 2-30: Cables for indoor use - Family property for fiber optic ribbon cables
TS EN 60332-3-22 Cables - Tests on electrical and fiber optic cables under fire conditions - Part 3-22: Test for vertical flame spread of bundled wires or cables vertically mounted - Category a
TS EN 50551-1 Simplex and duplex cables for cords - Part 1: Empty detail specification standard and minimum specifications.
TS EN 60793-1-30 Optical fibers - Part 1- 30: Measurement methods and test procedures - Fiber strength test
TS EN 60794-2-10 Cables - Fiber-optic cables - Part 2-10: Indoor fiber optic cables - Family characteristics of simplex and duplex cables
TS EN 60793-1-47 Optical fibers - Part 1-47: Measurement methods and test procedures - Losses caused by macro bending
TS EN 60794-3-11 Optical fiber cables - Part 3-11: Outdoor cables - Product specifications for single mode fiber optic communication cables directly embedded in and connected to the duct
TS EN 50516-2-1 Industrial connector sets and interconnect components to be used in fiber optic control and communication systems-Product specification-Part 1-1: Type ODVA PC industry terminals EN 60793-2-10 category of A1a and A1b mode fibers Requirements corresponding to category I (industrial environments) specified in 50173-1 and IEC 61753-1-3
TS EN 60794-1-23 Optical fiber cables - Part 1-23: General specifications - Basic optical cable test procedures - Cable element test methods
TS EN 61753-061-2 Fiber optic interconnectors and passive components - Performance standard - Part 061-2: Single-mode short fiber optic insulators without connectors for Category C - Controlled environment
TS EN 60794-1-22 Fiber optic cables - Part 1-22: General specifications - Basic optical cable testing procedures - Environmental testing methods
TS EN 60794-2-11 Fiber optic cables - Part 2-11: Closed fiber optic cables - detailed specifications for simplex and duplex cables for use in cabling facilities
TS EN 60794-2-21 Fiber optic cables - Part 2-21: Enclosed fiber optic cables - Multiple fiber optic distribution cables for use in cabling facilities Detailed specifications
TS EN 60794-4-20 Fiber optic cables - Part 4-20: Air optic cables along power lines - Family specifications for ADSS (All Dielectric Self-Supported) optical cables
60793-1-54 Optical fibers - part 1-54: Measurement methods and test procedures - Gamma radiation
TS EN 60794-2-31 Optical fiber cables - Part 2-31: Indoor cables - Detailed specification of fiber optic flat cables for indoor cabling
60793-1-42 Optical fibers - Part 1-42: Measurement methods and test procedures - Chromatic distribution
TS EN 61300-3-38 Fiber optic interconnection devices and passive elements- Basic test and measurement methods- Part 3-38: Tests and measurements -group delay, chromatic dispersion and phase clipping
TS EN 60794-1-22 Fiber optic cables - Part 1-22: General specifications - Basic optical cable test procedures - Environmental test methods
TS EN 60794-2-31 Fiber optic cables - Part 2-31: Indoor cables - Detailed specifications of ribbon fiber optic cables used in indoor campus cabling
TS EN 60794-2-11 Fiber optic cables - Part 2-11: Indoor fiber optic cables - Detailed features of simplex and duplex cables used in indoor campus cabling
TS EN 60794-3-60 Fiber optic cables - Part 3-60: Outdoor cables - Family standard for drinking water pipes and sub-channels installed in drinking water pipes with air supply and / or by pulling / dragging / floating 60794-3: 60)
TS EN 60794-1-23 Fiber optic cables - Part 1-23: General standard - Basic optical cable test procedures - Cable element test methods
TS EN 60794-2-10 Fiber optic cables - Part 2-10: Indoor fiber optic cables - Family specifications for simplex and duplex cables
TS EN 60794-2-21 Fiber optic cables - Part 2-21: Indoor fiber optic cables - Detailed specifications of multiple fiber optic distribution cables used in indoor campus cabling
TS EN 60794-2-40 Fiber optic cables - Part 2-40: Indoor fiber optic cables - Family standard for A4 fiber cables (IEC 60794-2-40: 2008)
TS EN 60794-2-41 Fiber optic cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibers
TS EN 60794-2-42 Fiber optic cables - Part 2-42: Indoor fiber optic cables - Product specification standard for simplex and duplex cables with A4 fibers
TS EN 60794-2-50 Fiber optic cables - Part 2-50: Indoor fiber optic cables - Family standard for simplex and duplex cables used in terminated wiring
TS EN 60794-3-10 Fiber optic cables - Part 3-10: Outdoor cables - Family specification standard for optical communication cables installed in the duct, directly buried or connected to overhead cables
TS EN 60794-3-12 Fiber optic cables - Part 3-12: Outdoor cables - Detailed specification standard for optical communication cables used directly in embedment or installed in channels in cabling in campuses
TS EN 60794-3-30 Fiber optic cables - Part 3-30: Outdoor cables - Family standard for optical communication cables used in lakes, river crossings and coastal applications
TS EN 60794-3-40 Fiber optic cables - Part 3-40: Outdoor cables aileFamily property standard for cables and pipes in waste water ducts installed in the inaccessible rain and waste water ducts
TS EN 60794-3-50 Fiber optic cables - Part 3-50: Outdoor cables aile Family standard for gas pipes and sub-ducts installed in the gas piping with air supply and / or by pulling / dragging (IEC 60794-3-50: 2008)
TS EN 60794-4-20 Fiber optic cables - Part 4-20: Overhead optical cables used in electrical power lines - Family specifications for ADSS (All dielectric self-supporting) optical cables
TS EN 60794-3-12 Fiber optic cables - Part 3-12: Outdoor cables - Detailed specification of optical communication cables embedded in the duct and for direct use in indoor cabling
60793-1-42 / AC Optical fibers - Part 1-42: Measurement methods and test procedures - Chromatic distribution
TS EN 50551-2 Single and double cables for cords - Part 2:
TS EN 61280-2-12 Fiber optic subsystem testing procedures - Part 2-12: Digital systems - Measurement of eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment
TS EN 60794-1-20 Fiber optic cables - Part 1-20: General standard - Basic optical cable test procedures - General aspects and descriptions
TS EN 60794-5-10 Fiber optic cables - Part 5-10: Family standard - Airborne external type microchannel fiber optic cables, microchannels and shielded microchannels
60793-1-51 Optical fibers - Part 1-51: Measurement methods and test procedures - Dry temperature
TS EN 60793-1-52 Optical fibers - Part 1-52: Measurement methods and testing procedures-Temperature change
TS EN 60793-1-53 Optical fibers - Part 1-53: Measurement methods and test procedures-Immersion in water
TS EN 60794-2-20 Cables - Fiber optic cables - Part 2-20: Indoor cables - family characteristics of multiple fiber optic distribution cables
TS EN 60794-5-20 Fiber optic cables - Part 5-20: Standard for family characteristics - Air-mounted external-type microchannel fiber optic units, microchannels and shielded microchannels
TS EN 60794-2-51 Fiber optic cables - Part 2-51: Indoor cables - Detail standard for simplex and duplex cables for use in controlled environmental conditions, cords
TS EN 60794-1-24 Fiber optic cables - Part 1-24: General standard - Basic optical cable test procedures - Electrical test methods
TS EN 61753-031-6 Fiber optic interconnectors and passive components - Performance standard - Part 031-2: Single mode 1xN and 2xN wavelength non-selective branching elements without connector for category O - Uncontrolled environment
tst EN 50551-2 Simplex and duplex cables for cords - Part 2: Detail specifications and minimum specifications for 3,0 mm single-mode simplex rigid fiber cable for U-type interconnect cords / cords
60793-1-42 Optical fibers - Part 1-42: Measurement methods and test procedures - Chromatic distribution
60793-1-42 / AC Optical fibers - Part 1-42: Measurement methods and test procedures - Chromatic distribution
tst EN 60793-1-51 Optical fibers - Part 1-51: Measurement methods and test procedures - Dry temperature (steady-state) tests
tst EN 60793-1-52 Optical fibers-Section 1-52: Measurement methods and test procedures-Temperature change tests
tst EN 60793-1-53 Optical fibers-Section 1-53: Measurement methods and test procedures-Water immersion test
TS EN 60794-1-20 Fiber optic cables - Part 1-20: General standard - Basic testing procedures for optical cable - General aspects and descriptions
TS EN 60794-1-24 Fiber optic cables - Part 1-24: General standard - Optical cable basic test procedures - Electrical test methods
TS EN 60794-2-51 Fiber optic cables - Part 2-51: Indoor cables - Detailed specifications of simplex and duplex cables used in cords for controlled environmental conditions (IEC 60794-2-51: 2014)
tst EN 60794-5-10 Fiber optic cables - Part 5-10: Family standard - Airborne external-type microchannel fiber optic cables, microchannels and shielded microchannels
tst EN 60794-5-20 Fiber optic cables - Part 5-20: Standard for family characteristics - Air-mounted external-type microchannel fiber optic units, microchannels and shielded microchannels
TS EN 60793-1-50 Optical fibers - Part 1-50: Measurement methods and test procedures - Wet temperature (steady state)
TS EN 60794-3 Fiber optic cables - Part 3: Part standard; Outdoor cables
TS EN 60794-4-10 Fiber optic cables - Part 4-10: Air line optical cables used in electrical power lines - Family specifications for optical earth wires
TS EN 60793-1-20 Optical fibers - Part 1-20: Measurement methods and test procedures - Fiber geometry
TS EN 60794-3 Fiber optic cables - Part 3: Part standard; Outdoor cables
60793-1-30 Optical fibers - Part 1-30: Measurement methods and test procedures - Fiber strength test
tst EN 60793-1-31 Optical fibers - Part 1- 31: Measurement methods and test procedures - Tensile strength
tst EN 60793-1-32 Optical fibers - Part 1-32: Measurement methods and test procedures - Detachability of coating
tst EN 60793-1-34 Optical fibers - Part 1-34: Measurement methods and test procedures - Fiber curl
tst EN 60793-1-41 Optical fibers - Part 1-41: Measurement methods and test procedures - Band width
tst EN 60793-1-44 Optical fibers - Part 1-44: Measurement methods and test procedures - - Cutting wavelength
tst EN 60793-1-50 Optical fibers - Part 1-50: Measurement methods and test procedures - Wet temperature (steady state)
tst EN 60793-1-54 Optical cables - Part 1-54: Measurement methods and test procedures - Gamma irradiation
tst EN 60793-2 Optical fibers - Part 2: Product properties - General
TS EN 60793-2-60 Optical fibers - Part 2-60: Product specification - Part specifications for Class C single mode interconnect fibers
TS EN 61753-031-3 Fiber optic interconnection devices and passive components - Performance standard - Part 031-3: unconnected for category U 1 × N and 2 × N single-mode wavelength non-branching elements - Uncontrolled environment
TS EN 60794-1-1 Fiber optic cables - Part 1-1: General specifications - General
TS EN 60793-2-30 Optical fibers - Part 2-30: Product specifications - Category a3 multimode fibers for section specifications
TS EN 60794-3-21 Fiber optic cables - Part 3-21: Outdoor cables - Detailed specification of self-supporting optical air line communication cables for indoor cabling
TS EN 60793-2-50 Optical fibers - Part 2-50: Product specifications - Sectional specifications for class B single mode fibers
TS EN 60793-2-20 Optical fibers - Part 2-20: Product specifications - Category a2, part specifications for multimode fibers
TS EN 60793-2-10 Optical fibers - Part 2-10: Product specifications - Category a1 multimode fibers section specifications
60793-1-20 / AC Optical fibers - Part 1-20: Measurement methods and test procedures - Fiber geometry
TS EN 60793-2 Optical fibers - Part 2: Product specifications - General
TS CLC / TS 50621 Directive for repair of damaged installed fiber optic cables and microchannels
TS EN 60794-3-20 Fiber optic cables - Part 3-20: Outdoor optical self-supporting overhead communication cables
TS EN 60794-5 Fiber optic cables - Part 5: Part specifications - Micro conduit cabling for blowing installation
TS EN 60794-1-2 Cables - Fiber optic cables - Part 1-2: General specifications - Basic optical cable test procedures
TS EN 60794-2-22 Fiber optic cables - Part 2-22: Internal cables - Detailed specifications of multi-simplex breakout optical cables that can be terminated with connectors
tst 8715 EN 60794-2 Fiber optic cables section 2. indoor cables - Related specifications
TS EN 50551-1: Unidirectional and duplex cables used in 2011 cords - Part 1: Blank detail and minimum specifications
60793-1-48 Optical fibers - Part 1- 48: Measurement methods and test procedures - polarization mode distribution
60793-1-1 Optical fibers - Part 1-1: Measurement methods and test procedures - general and guidance
60793-1-31: 2010 Optical fibers - Part 1-31: Measurement methods and test procedures - Tensile strength
TS EN 60793-1-34 Optical fibers - Part 1-34: Measurement methods and test procedures - Fiber curvature
60793-1-47 Optical fibers - Part 1-47: Measurement methods and test procedures - losses caused by macro bending
60793-1-49 Optical fibers - Part 1- 49: Measurement methods and test procedures - differential mode delay
TS EN 60793-1-21 Optical fibers- Part 1- 21: Measurement methods and test procedures-Coating geometry
TS EN 60793-1-22 Optical fibers - Part 1- 22: Measurement methods and test procedures - Length measurement
60793-1-33 Optical fibers - Part 1-33: Measurement methods and test procedures - Tensile corrosion sensitivity
TS EN 60793-1-40 Optical fibers - Part 1- 40: Measurement methods and test procedures - Attenuation
60793-1-45 Optical fibers - Part 1- 45: Measurement methods and test procedures - Mode field diameter
60793-1-46 Optical fibers - Part 1- 46: Measurement methods and test procedures - monitoring of changes in optical permeability
60793-1-44: 2011 Optical fibers - Part 1- 44: Measurement methods and test procedures - Cutting wavelength
TS EN 60794-4 Cables - Fiber optic cables - Part 4: Part specifications - Air line optical cables used in electrical power lines
TS EN 60794-2 Optical fiber cables - part 2: Indoor cables - Part features
TS EN 60794-2-41 Cables - Fiber optic cables - Part 2-41: Indoor cables - Product specification for single and pair aggregated a4 fibers
TS EN 60794-2-42 Cables - Fiber optic cables - Part 2-42: Product specification for single and double cables with A4 fibers in the building
TS EN 60794-3-40 Optical fiber cables - Part 3-40: Outdoor building cables - Family specifications for waste pipe cables for air-conditioning and / or pulling of medical waste and non-human inlets
TS EN 61269-1 Fiber optic terminal sets - General specifications
TS EN 61269-1-1 Fiber optic termination sets - part 1-1: Blank detail specification
TS EN 61280-4-1 Fiber optic communication subsystems basic test procedures - Part 4-1: Wiring harness and connections - Measurement of attenuation of multimode fiber optic cable assembly
TS EN 61280-2-11 Fiber optic communication subsystem test procedures - part 2-11: Numerical systems - Determination of the average q factor using the amplitude histogram assessment to monitor optical signal quality
61290-1-2: 2005 Optical amplifiers-Test methods -Chapter 1-2: Power and gain parameters -Electrical spectrum analyzer method
TS EN 62148-16 Fiber optic active components and elements - Package and interface standards - Part 16: Receiver and transmitter components for use with the Lc connector interface
TS EN 187105 Single mode optical cable (duct / direct buried installation)