• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Components and Accessories for Telecommunications Equipment Standards

The following standards are made by our company and we provide completely reliable testing, auditing and certification services with our high quality service.

 

TS EN 60169-23 Radio frequency connectors section 23: 3,5 mm end and socket connectors for use with 3,5 mm inflexible precision coaxial lines with outer diameter of conductor 

TS EN 60169-25 Radio frequency connectors section 25: 13,56 for the use of balanced shielded cables with an inner radius of mm outer conductor and double internal conductor 

TS EN 122001 Blank detail specifications - cecc military specifications related to radio frequency connectors

TS EN 122130 Part specifications: Radio frequency coaxial connectors, smb series 

TS EN 122140 Part specifications: Radio frequency coaxial connectors-Smc series 

TS EN 122150 Part specifications: Radio frequency coaxial connectors-E / a flange series 

TS EN 61196-3-3 Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal ground wiring - Detailed communication specifications for foam dielectric coaxial cables in local area networks up to 185 m in length and with a speed of 10 mb / s 

TS EN 61580-4 Measurement methods for waveguides - Part 4: Reduction of waveguides and waveguides 

TS EN 61580-6 Measurement methods for waveguides - Part 6: Return loss on waveguides and waveguides

TS EN 50289-3-9 Cables - Communication cables - Specification for test methods - Part 3-9: Mechanical test methods - Bending tests 

TS EN 50117-1 Cables - Coaxial cables - Part 1: General specifications

TS EN 50289-1-3 Communication cables for test methods - Specification - Part 1-3: Electrical test methods - Dielectric strength 

TS EN 50289-1-4 Communication cables - Specification for test methods - Part 1-4: Electrical test methods - Insulation resistance

TS EN 50289-1-5 Communication cables - Specification for test methods - Part 1-5: Electrical test methods - Capability0

TS EN 50289-1-7 Communication cables - Specification for test methods section 1-7: Electrical test methods - Spreading speed

TS EN 50289-3-1 Communication cables - Specification for test methods - Part 3-1: Mechanical test methods - General specifications

TS EN 50289-3-11 Communication cables - Specification for test methods - Part 3-11: Mechanical test methods - Resistance of the cable to insulation from cutting 

TS EN 50289-3-12 Communication cables - Specification for test methods - Part 3-12: Mechanical test methods - Nuisance damage 

TS EN 61000-4-29 Electromagnetic compatibility (emu) - Section 4-29: Tests and measurement techniques-Immune tests for sudden voltage drops, short interruptions and voltage changes at the power input end 

TS EN 50289-3-16 Communication cables - Specification for test methods - Part 3-16: Cable pull performance

TS EN 50289-3-2 Communication cables - For test methods - Specification - Part 3-2: Mechanical test methods - Tensile strength and elongation for conductors 

TS EN 50289-3-4 Communication cables - Specifications for test methods section 3-4: Mechanical test methods-Tensile strength, elongation and shrinkage of insulation and sheath

TS EN 50289-3-6 Communication cables - Specification for test methods - Part 3-6: Mechanical test methods - Impact resistance of the cable

TS EN 50289-3-9 Communication cables - Specification for test methods - Part 3-9: Mechanical test methods - Bending tests

TS EN 50289-4-1 Cables-Communication cables-Specifications for test methods-Part 4-1: Environmental test methods-General specifications 

TS EN 50289-4-2 Communication cables - Specification for test methods - Part 4-2: Environmental tests water penetration

TS EN 50289-4-6 Communication cables - Specification for test methods - Part 4-6: Environmental test methods - Temperature cycle 

TS EN 50117-3-1 Coaxial cables - Part 3-1: Related requirements for cables used in communication applications-Miniaturized cables used in digital communication 

TS EN 122340 Part specification standard - Radio frequency coaxial connectors - MMCX series

TS EN 50290-2-24 Communication cables-Part 2-24: General design rules and manufacturing-Pe sheath pulp

TS EN 50290-2-26 Communication cables - Part 2-26: General design rules and manufacturing-Halogen-free flame retardant insulation paste

TS EN 50290-2-27 Communication cables - Part 2-27: General design rules and manufacturing-Halogen-free flame retardant thermoplastic sheath pulps 

TS EN 50290-2-28 Communication cables - Part 2-28: General design rules and manufacturing-Filling dough for filled cables

TS EN 50290-2-29 Communication cables - Part 2-29: General design rules and manufacturing-Cross-linked PE insulation paste 

TS EN 50290-2-30 Communication cables - Part 2-30: General design rules and manufacturing - Poly (tetrafluoroethylene-hexafluoropropylene) (fep) insulation and sheath paste

TS EN 50289-1-6 Communication cables - Specification for test methods - Part 1-6: Electrical test methods-Electromagnetic performance

TS EN 50289-1-10 Communication cables - Specification for test methods - Part 1-10: Electrical test methods-Diaphony

TS EN 50289-3-17 Communication cables - Specification for test methods - Part 3-17: Mechanical test methods-Dielectric adhesion and sheath 

TS EN 50289-4-9 Communication cables - Specification for test methods - Part 4-9: Environmental test methods-Weather resistance 

TS EN 50290-2-20 Communication cables - Part 2-20: General design rules and manufacturing-General

TS EN 50290-2-21 Communication cables - Part 2-21: General design rules and manufacturing-PVC insulation paste

TS EN 50290-2-22 Communication cables-Part 2-22: General design rules and manufacturing-PVC sheath paste 

TS EN 50117-3-1 Cables - Coaxial cables - Part 3-1: Part specifications of cables used in telecommunications applications - Miniaturized cables used in digital communication systems

TS EN 50289-1-10 Cables - Communication cables - Specifications for test methods - Part 1-10: Electrical test methods - Diaphony

TS EN 50289-3-17 Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods - Adhesion of dielectric and sheath

TS EN 50289-4-9 Cables - Communication cables - Specification for test methods - Part 4-9: Environmental test methods - Pneumatic durability

50288-5-2 Multi-element metal cables for analog and digital communication and control - Section 5-2: Section specification standard for screened cables up to 250 mhz; Work area and patch beam cables

TS EN 50289-3-13 Communication cables - Requirements for test methods - Part 3-13: Mechanical test methods - Wind vibration.

50288-4-2 Multi-element metal cables for analog and digital communication and control - Section 4-2: Section specification standard for screened cables up to 600 mhz; Work area and patch beam cables

TS EN 50407-1 End-user multi-pair cables used in high bit rate telecommunications networks - Part 1: Outdoor cables

TS EN 50117-2-2 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - Open operating cables for operating systems at 5 MHz - 1 000 MHz 

TS EN 50117-2-3 Coaxial cables - Part 2-3: Part specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for systems running on 1000 mhz

TS EN 50117-2-4 Coaxial cables - Part 2-4: Part specification standard for cables used in cable distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz

TS EN 50117-2-5 Coaxial cables - Part 2-5: Part specification standard for cables used in wired distribution networks - 5 mhz - Outdoor landing cables for systems operating on 3000 mhz

TS EN 50406-2 End-user multi-pair cables used in high bit rate telecommunications networks - Part 2: Trough and flush cables

TS EN 50406-1 End-user multi-pair cables used in high bit rate telecommunications networks - Part 1: Overhead cables

TS EN 50288-7 Multi-element metal cables for analog and digital communication and control - Part 7: Part specification standard for instrumentation and control cables 

TS EN 50290-2-1 Communication cables - Part 2-1: Common design rules and construction 

TS EN 50117-2-1 Cables - Coaxial cables - Part 2-1: Part specifications for indoor stud cables used in wired distribution networks - 5 mhz-1000 mhz systems 

TS EN 60512-11-14 For electronic devices - Electromechanical components - Basic test procedures and measuring methods - Part 11: Air conditioning tests - Part 14: Test 11p - Flowing single gas corrosion test 

TS EN 60708 Moisture resistant polyolefin sheath and polyofelin insulated low frequency cables

TS EN 50117-1 / A1 Cables - Coaxial cables - Part 1: General specifications

TS EN 50441-3 Cables - For residential indoor premises - part 3: Shielded cables - Degree 3

TS EN 61169-8 Radio-frequency connectors-Section 8: Section specification standard for radio-frequency coaxial cable connectors with 50 mm outer conductor bore, typically with 6,5 ohm (type BNC) spindle lock

TS EN 61169-16 Radio-frequency connectors-Section 16: Section specification standard for radio-frequency co-axial cable connectors typically with 50 ohm (75 ohm) screw type, 7 mm outer conductor inner diameter 

TS EN 61169-37 Radio-frequency connectors-Section 37: Section specification standard - for Stwx8 rf connectors 

TS EN 50290-2-21 / A1 Communication cables - part 2-21: General design rules and manufacturing - PVC insulation paste 

TS EN 50290-2-22 / A1 Communication cables - Part 2-22: General design rules and manufacturing - PVC sheath compounds

TS EN 50290-2-26 / A1 Communication cables - part 2-26: General design rules and manufacturing - Halogen-free flame retardant insulation paste 

TS EN 50290-2-21 / A1 communication cables-Section 2-21: General design rules and manufacturing-PVC insulation paste 

TS EN 50290-2-22 / A1 communication cables-Section 2-22: General design rules and manufacturing-PVC sheath paste

TS EN 50290-2-27 / A1 Communication cables - Part 2-27: General design rules and manufacturing-Halogen-free flame retardant thermoplastic sheath pulp

TS EN 50117-2-1 / A1 Cables - Coaxial cables - Part 2-1: used in wired distribution networks - Part specifications for indoor stud cables in 5 mhz-1000 mhz systems 

TS EN 50117-2-1 / A1 Cables - Coaxial cables - Part 2-1: used in wired distribution networks - Part specifications for indoor stud cables in 5 mhz-1000 mhz systems 

TS EN 50117-2-2 / A1 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - For operating systems at 5 MHz Opened cables - 1 000 MHz 

TS EN 50117-2-3 / A1 Coaxial cables - Section 2-3: Section specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for 1000 mhz systems 

TS EN 50117-2-4 / A1 Coaxial cables - Part 2-4: Part specification standard for cables used in wired distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz 

TS EN 50117-2-5 / A1 Coaxial cables - Section 2-5: Section specification standard for cables used in cable distribution networks - 5 mhz - Outdoor landing cables for 3000 mhz systems 

TS EN 50289-4-5 Cables - Communication cables - Specification for test methods - Part 4-5: Environmental test methods - Climate series 

TS EN 50289-4-7 Cables - Communication cables - Specification for test methods - Part 4-7: Environmental test methods - Moist heat stability

TS EN 50290-2-24 / A1 Communication cables - Part 2-24: General design rules and manufacturing - Pe sheath pulp 

TS EN 60966-2-3 Radio frequency and coaxial cable assemblies - part 2-3: Part feature for flexible coaxial cable assemblies - Frequency range 0 to 1000 mhz, ic 61169-8 connectors 

TS EN 50290-2-24 / A1 Communication cables - Part 2-24: General design rules and manufacturing-Pe sheath pulp

Test procedure of balanced communication cabling system in accordance with TS EN 61935-2-20 En 50173 series-Part 2-20-Collective cords and work area cords-Empty detail feature for class d applications 

TS EN 62431 Resistance of electromagnetic wave absorbers to wave frequency in millimeters - Measurement methods 

TS EN 61169-24 Radio-Frequency connectors-Part 24: Section specification standard, typically screw-matched radio-Frequency co-Axial cable connectors for use in 75-read cable distribution systems.

TS EN 61169-18 Radio frequency connectors - Part 18: Part feature standard - Type ssma's radio-frequency uniaxial connectors

TS EN 61169-35 Radio frequency connectors - Part 33: Part specifications for 2,92 serial RF connectors 

TS EN 50290-2-27: 2003 / A1: 2008 / AC Communication cables - Part 2-27: General design guidelines and manufacturing - Halogen-free flame retardant thermoplastic sheath pulp 

TS EN 61935-2 General wiring systems - Test of balanced communication wiring according to ISO / IEC 11801 

TS EN 50441-1 Cables - For residential indoor premises - Part 1: Unshielded cables - Grade 1 

TS EN 50441-2 Cables - For indoor communication facilities in residential buildings - Part 2: Shielded cables - Degree 1 

TS IEC 61156-5 Cables - Core and symmetrical double / quad cables for digital communication - Part 5: Symmetrical double / quad cables with transmission characteristics up to 1000 mhz - Horizontal ground connection - Part specifications 

TS EN 50441-4 Cables - For indoor communication facilities in residential buildings - Part 4: Cables up to 1200 mhz - Degree 3 

TS EN 61169-14 Radio frequency connectors - RF coaxial connectors with internal diameter 12 mm of screw coupled outer conductor - Characteristic impedance 75 ohm (type 3,5 / 12)

TS EN 50288-8 Multi-element metallic cables for analog and digital communication and control - Part 8: Rules for type 2 cables characterized up to 1 MHz

tst EN 61169-2 Radio-frequency connectors-Section 2: Section specification standard Radio-frequency coaxial connectors of type 9,52 (ic 61169-2: 2001)

TS EN 50289-4-16 Cables - Communication cables - Specification for test methods - Environmental test methods - Part 4-16: Protection of circuit integrity in fire conditions 

TS EN 62037-1 Passive RF and microwave devices, intermodulation level measurements-Part 1: General rules and measurement methods 

TS EN 61169-47 Radio frequency connectors - Section 47: Part specifications for radiofrequency coaxial connectors used in 75 ohm cable networks 

TS EN 50288-9-1 Cables - multi-element metallic cables for analog and digital communication and control - Part 9-1: Part specification standard for screened cables with specified specifications up to 1000 MHz-Horizontal and building cables.

TS EN 50288-11-1 Cables - multi-element metallic cables for analog and digital communication and control - Part 11-1: Part specification standard for screened cables with specified specifications up to 500 MHz-Horizontal and building cables. 

TS EN 50117-2-5 / AC Coaxial cables - Section 2-5: Section specification standard for cables used in wired distribution networks - 5 mhz - Outdoor landing cables for systems operating on 3000 mhz 

TS EN 50288-10-1 Multi-element metal cables for analog and digital communication and control - Part 10-1: Part specification standard for screened cables with specified specifications up to 500 Hz - Horizontal and building main backbone cables 

TS EN 61169-42 Radio frequency connectors - Part 42: Part standard for quick-locking RF coaxial connectors of the CQN series 

TS EN 50117-4-1 Coaxial cables - Part 4-1: Part specifications of the cables for bct wiring according to EN 50173 - 5 mhz-3000 MHz installed systems for indoor cables 

TS EN 62037-2 Passive RF and microwave elements, intermediate modulation level meters - Part 2: Measurement of passive intermediate modulation in coaxial cable installations 

50412-2-1 Electrical line communication apparatus and systems for low voltage installations in the frequency range 1,6 MHz - 30 MHz - Part 2-1: Residential, business and industrial environment - Immunity rules 

TS EN 61169-44: 2013 Radio frequency connectors-Section 44: Section standard for SMP series push-on radio frequency coaxial connectors 

TS EN 61169-43: 2013 Radio frequency connectors - Part 43: Part standard for RBMA series blind matched RF coaxial connectors 

50288-5-2 Multi-element metal cables for analog and digital communication and control - Section 5-2: Section specification standard for screened cables up to 250 mhz; Work area and patch beam cables 

50288-3-1 Multi-element metal cables for analogue and digital communication and control - Part 3-1: Part specification standard for unshielded cables with specified specifications up to 100 mhz; Horizontal and building main spine cables

50288-3-2 Multi-element metal cables for analogue and digital communication and control - Part 3-2: Part specification standard for unshielded cables with specified specifications up to 100 mhz; Horizontal and building main spine cables 

TS EN 50288-1 Multi-element metal cables for analog and digital communication and control - Part 1: General features 

50288-4-2 Multi-element metal cables for analog and digital communication and control - Section 4-2: Section specification standard for screened cables up to 600 mhz; Work area and patch beam cables 

50288-2-2 Multi-element metal cables for analog and digital communication and control - Section 2-2: Section specification standard for screened cables up to 100 mhz; Work area and patch beam cables 

50288-5-1 Multi-element metal cables for analog and digital communication and control - Section 5-1: Section specification standard for screened cables up to 250 mhz; Horizontal and building main spine cables

TS EN 50288-6-1 Multi-element metal cables used in analog and digital communication and control - Part 6-1: Section specification standard for unshielded cables with specifications up to 250 MHz; Horizontal and building main backbone cables 

TS EN 50117-1 / A2 Coaxial cables - Part 1: General specifications 

TS EN 50117-4-1 / A1 Coaxial cables - Part 4-1: Wiring in accordance with EN 50173 Sectional specifications for cables for BCT - Closed drop cables for operating systems in 5 MHz - 3 000 MHz 

50288-6-2 Multi-element metal cables for analogue and digital communication and control - Part 6-2: Part specification standard for unshielded cables with specified specifications up to 250 mhz; Work area and patch beam cables 

TS EN 50288-2-1 Multi-element metallic cables for analog and digital communication and control circuits - Part 2-1: Specification for shielded cables characterized up to 100 mhz - Horizontal and building cables

TS EN 50117-2-1 / A2 Coaxial cables - Part 2-1: Part specifications for indoor stud cables used in wired distribution networks - 5 mhz-1000 mhz systems 

TS EN 50117-2-2 / A2 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - For operating systems at 5 MHz Opened cables - 1 000 MHz

TS EN 50117-2-3 / A2 Coaxial cables - Section 2-3: Section specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for 1000 mhz systems 

TS EN 50117-2-4 / A2 Coaxial cables - Part 2-4: Part specification standard for cables used in wired distribution networks - 5 mhz - Indoor landing cables for systems running on 3000 mhz 

TS EN 50117-2-5 / A2 Coaxial cables - Section 2-5: Section specification standard for cables used in cable distribution networks - 5 mhz - Outdoor landing cables for 3000 mhz systems 

TS EN 50289-3-8 Communication cables - Specification for test methods section 3-8: Mechanical test methods-Abrasion resistance of cable jacket markings 

TS EN 50290-2-23 Communication cables - Part 2-23: General design rules and manufacturing-Pe insulation paste 

TS EN 50290-2-25 Communication cables - Part 2-25: General design rules and manufacturing-Polypropylene insulation paste 

TS EN 61169-1 Radio-frequency connectors-Section 1: General requirements-General requirements and measurement methods

TS EN 62680-2 Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Standard for micro-USB cables and connectors, Revision 1.01 

TS EN 50601 General wiring systems - Shielded flat patch cable and flat working area cords for class D applications - - Detailed specifications Specification for balanced communication wiring test in EN 50173-4 framework 

TS EN 50602 General wiring systems - Specification for balanced communication wiring testing in the framework of EN 50173-4 - Display flat patch cable and flat working area cords for class E applications - Detailed specifications 

TS EN 50603 General wiring systems - For balanced communication wiring test in EN 50173-4 - Specification for class E applications Flat patch cord and flat working area cords with shielding - Detailed specifications 

TS EN 61580-7 Measurement methods for waveguides - Part 7: Graphical method for determining the performance of waveguides 

TS EN 50289-1-10 Cables - Communication cables - Specifications for test methods - Part 1-10: Electrical test methods - Diaphony 

TS EN 62680-4 Universal serial bus (USB) interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Classification Document, Revision 2.0 

TS EN 60728-1-2 Cable networks for television beacons, audio beacons and interactive services - Part 1-2: Performance requirements for beacons transmitted at the operating system exit 

TS EN 61169-45 Radio-frequency connectors - Part 45: Part standard for the series of quick-locking coaxial connectors of the SQMA series 30.10.2014 33.120.30

TS EN 50407-3 Multi-pair cables with high bit rate digital access for use in communication networks - Part 3: Indoor services up to 100 MHz supporting universal services for up to 100 m connection lengths, applications up to 100 Mbit / s on xDSL and IP multipair / quadruple vertical cables 

TS EN 50599 General cabling systems - Specification for balanced communication cabling tests in accordance with EN 50173-4 - Screened flat connection cords and flat working area cords for Class D applications - Detail standard 

50117-2-1 / tst A2 Coaxial cables - Part 2-1: Part used for indoor stud cables in systems running on 5 mhz-1000 mhz 

Coaxial cables - Part 50117-2: for cables used in wired distribution systems Sectional specification - Opened cables for operating systems at 2 MHz - Opened cables - 2 2 MHz TS EN 2-5-1

TS EN 50117-2-3 / tst A2 Coaxial cables - Part 2-3: Part specification standard for cables used in wired distribution networks - 5 mhz - Distribution and trunk cables for 1000 mhz systems  

TS EN 50117-2-4 / tst A2 Coaxial cables - Part 2-4: Part specification standard for cables used in wired distribution networks - 5 mhz - Indoor landing cables for 3000 mhz systems  

TS EN 50117-2-5 / tst A2 Coaxial cables - Section 2-5: Section specification standard for cables used in wired distribution networks - 5 mhz - Outdoor landing cables for 3000 mhz systems 

TS EN 50288-7 Multi-element metallic cables for analog and digital communication and control - Part 7: Part specification standard for measuring and control cables 

tst EN 50289-3-8 Communication cables-Specifications for test methods section 3-8: Mechanical test methods-Wear resistance of cable jacket markings  

tst EN 50290-2-23 Communication cables-Section 2-23: General design rules and manufacturing-Pe insulation paste   

tst EN 50290-2-25 Communication cables - Part 2-25: General design rules and manufacturing-Polypropylene insulation paste   

tst EN 50407-3 Multi-pair cables with high bit rate digital access for use in communication networks - Part 3: Universal services for up to 100 m connection lengths, 100 MHz up to 100 Mbit / s on xDSL and IP applications multipair / quadruple vertical cables   

tst EN 50599 General cabling systems - Specification for balanced communication cabling tests in accordance with EN 50173-4 - Screened flat connection cords and flat working area cords for Class D applications - Detail standard 

TS EN 61169-49 Radio frequency connectors - Part 49: Part standard for SMAA series RF connectors 

TS EN 50290-4-2 Communication cables - Part 4-2: General considerations for the use of cables - User guide

TS EN 50290-4-1 Communication cables - Part 4-1: General considerations for the use of cables - Environmental requirements and safety regulations 

TS EN 61196-10-1 Coaxial communication cables - Part 10-1: standard for empty detail specification for semi-rigid cables containing polytetraflurethylene (PTFE) dielectrics 

tst EN 50288-1 Multi-element metal cables used in analogue and digital communication and control - Part 1: General features

TS EN 61169-48 Radio-frequency connectors - Part 48: Part standard for BMP RF series coaxial connectors 

TS EN 61169-50 Radio-frequency connectors - Part 50: Part standard for RF coaxial connectors of 4.11 mm internal diameter external conductors with fast locking system - 50 Ohm characteristic impedance (QMA type)

TS EN 50288-10-2 Multi-element metal cables for analog and digital communication and control - Part 10-2: Part specification standard for screened cables with specified specifications from 1 MHz to 500 MHz - part cable for workspace and data center applications 

TS EN 50288-10-2 Multi-element metal cables for analog and digital communication and control - Part 10-2: Part specification standard for screened cables with specified specifications from 1 MHz to 500 MHz - part cable for workspace and data center applications  

TS EN 50288-11-2 Cables - multi-element metallic cables for analog and digital communication and control - Part 11-2: Part specification standard for screened cables with specified specifications from 1 MHz to 500 MHz - for workspace and data center applications track cable 

TS EN 50288-9-2 Cables - multi-element metallic cables for analog and digital communication and control - Part 9-2: Part specification standard for screened cables with specified specifications from 1 MHz to 1000 MHz - for workspace and data center applications track cable  

TS EN 50288-9-2 Cables - multi-element metallic cables for analog and digital communication and control - Part 9-2: Part specification standard for screened cables with specified specifications from 1 MHz to 1000 MHz - for workspace and data center applications track cable

TS EN 50117-2-2 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - Open operating cables for operating systems at 5 MHz - 1 000 MHz 

TS EN 50117-2-2 / A1 Coaxial cables - Part 2-2: for cables used in cable distribution systems Sectional specification - For operating systems at 5 MHz Opened cables - 1 000 MHz

TS EN 50290-2-21 / A1 / AC Communication cables - part 2-21: General design rules and manufacturing - PVC insulation paste 

TS EN 50290-2-21 / AC Communication cables - part 2-21: General design rules and manufacturing - PVC insulation paste

TS EN 50289-1-3 Communication cables for test methods - Specification - Part 1-3: Electrical test methods - Dielectric strength  

TS EN 50289-1-4 Communication cables - Specification for test methods - Part 1-4: Electrical test methods - Insulation resistance   

TS EN 50289-3-10 Communication cables - Requirements for test methods - Part 3-10: Mechanical test methods - Bending and torsion   

TS EN 50289-3-13 Communication cables - Requirements for test methods - Part 3-13: Mechanical test methods - Wind vibration.   

TS EN 50289-4-16 Cables - Communication cables - Specification for test methods - Environmental test methods - Part 4-16: Protection of circuit integrity in fire conditions   

TS EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric 

TS EN 50289-4-17 Communication cables - Requirements for test methods - Part 4-17: Test methods for UV resistance of sheaths of electrical and optical cables 

TS EN 61726 Wiring harnesses and passive microwave components - Shielding attenuation measurements with reflective chamber method 

TS EN 61726 Wiring harnesses and passive microwave components - Shielding attenuation measurements with reflective chamber method 

TS EN 61169-53 Radio frequency connectors - Part 53: Part specifications for RF coaxial connectors with internal diameter 16 mm of outer conductor - Characteristic impedance 50? (Type S7-16) 

TS EN 61169-1: 2013 / AC Radio-frequency connectors-Section 1: General requirements-General requirements and measurement methods 

TS EN 61169-52 Radio frequency connectors - Part 52: Part standard for the series of coaxial RF connectors MMCX 

62680-2-3 Universal serial bus (USB) interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Classification Document, Revision 2.0 (TA 14) 

TS EN 50117-4-2 Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cable distribution networks 

62680-2-1 Universal serial bus interfaces for data and power - Part 2-1: Universal serial bus specifications, revision 2.0 (TA 14) 

62680-2-2 Universal serial bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specifications, Revision 1.01 (TA 14)

TS EN 60966-2-7 Radio frequency and coaxial cable assemblies - Part 2-7: Detailed specification for cable assemblies for radio and television receivers - Frequency range 0 MHz 000 MHz 3, IEC 61169-47 connectors 

TS EN 62680-1-1 Universal serial bus interfaces for data and power - Part 1-1: Universal serial bus interfaces - Common components - USB battery charging specifications, revision 1.2 (TA 14) 

TS EN 62153-4-7 Fiber optic connector optical interfaces - Part 2-1: Optical interface standard for angular (perpendicular) single mode fibers with physical contact

TS EN 60966-2-4 Radio frequency and coaxial cable assemblies - Part 2-4: Detailed specifications of cable assemblies for radio and tele-receiver receivers (0 to 3000 mhz, ic 60169-2 connectors)

TS EN 60153-1 Hollow metallic waveguides - Part 1: General requirements and measurement methods 

TS EN 60153-2 Hollow metallic waveguides - Part 2: Related specifications for ordinary rectangular waveguides 

TS EN 60154-1 Flanges for waveguides - Part 1: General requirements 

TS EN 60154-2 Flanges for waveguides - Part 2: Specification for fasteners for normal rectangular waveguides 

TS EN 61169-58 Radio frequency connectors - Part 58: Partial specifications for RF coaxial connectors with blind-pair connection - Characteristic impedance 50? (SBMA type) 

TS EN 62680-1-3 Universal serial bus interfaces for data and power - Part 1-3: Universal serial bus interfaces - USB CTM Type cable and connector specifications

TS EN 62680-1-3 Universal serial bus interfaces for data and power - Part 1-3: Universal serial bus interfaces - USB CTM Type cable and connector specifications

TS EN 50289-1-11 Communication cables-Specifications for test methods section 1-11: Electrical test methods-Characteristic impedance, input impedance, return loss 

TS EN 61169-54 Radio frequency connectors - Part 54: Partial specification for coaxial connectors with 10 inner diameter outer conductor mm, nominal characteristic impedance 50?, Series 4,3-10 

TS EN 62680-1-2 Universal serial bus interfaces for data and power - Part 1-2: Common parts - USB Power Distribution features

TS EN 60966-2-5 Radio frequency and coaxial cable assemblies - Part 2-5: Detailed specifications for cable assemblies for radio and television receivers - Frequency range 0 to 1000 mhz 

TS EN 60966-2-6 Radio frequency and coaxial cable assemblies - Part 2-6: Detailed specifications for cable assemblies for radio and television receivers - Frequency range 0 to 3000 mhz

TS EN 50289-1-1 Communication cables - Specification for test methods - Part 1-1: Electrical test methods - General specifications

TS EN 50289-1-8 Communication cables - Specification for test methods - Part 1-8: Electrical test methods - Attenuation

TS EN 50289-1-9 Communication cables - Specification for test methods - Part 1-9: Electrical test methods-Unbalanced attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)

TS EN 60153-1 / AC Hollow metallic waveguides - Part 1: General requirements and measurement methods 

TS EN 60153-2 / AC Hollow metallic waveguides - Part 2: Related specifications for ordinary rectangular waveguides 

TS EN 50601 General wiring systems - Shielded flat patch cable and flat working area cords for class D applications - - Detailed specifications Specification for balanced communication wiring test in EN 50173-4 framework   

TS EN 50602 General wiring systems - Specification for balanced communication wiring testing in the framework of EN 50173-4 - Display flat patch cable and flat working area cords for class E applications - Detailed specifications   

TS EN 50603 General wiring systems - For balanced communication wiring test in EN 50173-4 - Specification for class E applications Flat patch cord and flat working area cords with shielding - Detailed specifications   

TS EN 50289-3-8 Communication cables - Specification for test methods section 3-8: Mechanical test methods-Abrasion resistance of cable jacket markings

Plastics - Non-plasticizing poly (vinyl chloride) (pvc-U) molding and extrusion materials - Part 8450: Preparation of test pieces and determination of properties

TS EN 60966-3-2 Radio frequency and coaxial cable harness - Part 3-2: Detail specification standard for semi-flexible coaxial cable harnesses used in GSM

TSE ISO / TS 22002-3: 2011 Prerequisite programs in food safety - Part 3: Farming

TS EN 50289-1-2 Cables-Communication cables-Specifications for test methods-Part 1-2: Electrical test methods-Da resistance 

TS EN 50289-1-7 Cables - Communication cables - Specifications for test methods - Part 1-7: Electrical test methods - Spreading speed 

TS EN 50289-4-2 Cables - Communication cables - Specification for test methods - Part 4-2: Environmental test methods - Water penetration 

TS EN 50289-1-12 Communication cables-Requirements for test methods-Section 1-12: Electrical test methods-Inductance

TS EN 50289-1-6 Cables - Communication cables - Specification for test methods - Part 1-6: Electrical test methods - Electromagnetic performance 

TS EN 50289-3-5 Communication cables - Specification for test methods section 3-5: Mechanical test methods-Crush resistance of cable 

TS EN 50289-3-7 Communication cables - Specification for test methods section 3-7: Mechanical test methods-Wear resistance of cable jacket

TS EN 50289-4-4 Cables - Communication cables - Specification for test methods - Part 4-4: Environmental test methods - Resistance to solvents and contaminating liquids

TS EN 50289-4-6 Cables - Communication cables - Specifications for test methods - Part 4-6: Environmental test methods - Temperature cycle 

TS EN 50289-3-16 Cables - Communication cables - Specification for test methods - Part 3-16: Mechanical test methods - Cable drawing performance 

TS EN 50289-4-11 Communication cables-Test methods for test methods-Part 4-11: Environmental test methods-Integrated horizontal fire test method

TS EN 50289-1-5 Cables - Communication cables - Specification for test methods - Part 1-5: Electrical test methods - Capacitance 

TS EN 50289-3-11 Cables - Communication cables - Specification for test methods - Part 3-11: Mechanical test methods - Resistance of the cable to in-cut 

TS EN 50289-3-12 Cables - Communication cables - Specification for test methods section 3-12: Mechanical test methods - Nonsense damage 

TS EN 50289-1-13 Communication cables - Requirements for test methods - Part 1-13: Electrical test methods - Coupling attenuation or shielding attenuation of cables / component cords / coaxial cables previously connected by connector 

TS EN 50289-1-14 Communication cables - Requirements for test methods - Part 1-14: Electrical test methods - Coupling or shielding weakening of connected equipment 

TS EN 50289-1-15 Communication cables - Requirements for test methods - Part 1-15: Electromagnetic performance - Coupling attenuation of ducts or connections (laboratory conditions)

TS EN 50289-1-16 Cables - Communication cables - Specification for test methods - Part 1: 16: Electromagnetic performance - Coupling attenuation of cable harnesses

TS EN 50289-3-10 Communication cables - Requirements for test methods - Part 3-10: Mechanical test methods - Bending and torsion 

TS EN 50289-3-15 Communication cables - Requirements for test methods - Part 3-15: Mechanical test methods - Resistance of the underwater cable against hydrostatic pressure / Note: It is applied together with En 50289-3-1. 

TS EN 50289-4-14 Communication cables-Requirements for test methods-Section 4-14: Environmental test methods-Illumination / note: En applies in conjunction with 50289-3-1. 

TS EN 50289-4-12 Communication cables - Requirements for test methods - Part 4-12: Environmental test methods - Vertical flame propagation test in small bundled communication cables 

TS EN 50290-1-1 Communication cables - Part 1-1: General 

TS EN 50290-1-2 Communication cables - Part 1-2: Definitions

TS EN 60169-24 Radio frequency connectors section 24: Screw-coupled radio frequency coaxial connectors for use in 75 ohm cable distribution systems in particular 

TS EN 60169-21 Radio frequency connectors-Section 21: Two types of screw-type radio-frequency connectors with different types of 9.5 mm (0.374 inch) internal diameter of the outer conductor-Characteristic impedance 50 ohm (type sc-A and type sc-B)

TS EN 60512-10-4 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 10: Impact (free components), static load (fixed components), endurance and overload tests - Part 4: Test 10b: Electrical overload Loading (binders)  

tst EN 60512-10-4 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 10: Impact (free components), static load (fixed components), durability and overload tests - Part 4: Test 10b: Electrical overload Loading (binders)   

TS EN 60512-11-14 Connectors for electronic equipment - Tests and measurements - Part 11-14: Air conditioning tests - Test 11p: Single gas flowing corrosion test 

TS EN 60933-5 Audio-visual and audio-visual systems-Interconnection and matching values-Part 5: y / c connector for video systems, electrical matching values ​​and identification

TS EN 60966-1 Radio frequency and coaxial cable sets-Section 1: General specifications-General requirements and test methods

TS EN 60966-3: 2009 Radio frequency - Coaxial cable harnesses - Part 3: Section characteristics for semi-rigid coaxial cable harnesses

TS EN 60966-4 Radio frequency - Coaxial cable harnesses - Part 4: Section characteristics for semi-rigid coaxial cable harnesses 

TS EN 60966-2-2 Radio frequency and coaxial cable fittings - Part 2 - 2: Blank detail specifications for flexible coaxial cable fittings

TS EN 60966-3-1: 2009 Radio frequency - Coaxial cable harnesses - Part 3-1: Empty detail specifications for semi-rigid coaxial cable harnesses

TS EN 60966-4-1 Radio frequency - Coaxial cable harnesses - Part 4-1: Blank detail specifications for semi-rigid coaxial cable harnesses

TS EN 60966-2-1 Radio frequency and coaxial cable assemblies - part 2-1: Part feature for flexible coaxial cable assemblies

Receiving antennas for satellite broadcasts in the 61114 / 1 ghz band - Part 11: Electrical measurements TS EN 12-1 

TS EN 61114-2 Measurement methods for satellite broadcast receiver antennas in the 11 / 12 ghz band- Mechanical and environmental conditions tests of single and common receiver antennas

TS EN 61169-1-1 Radio frequency connectors - Part 1: General specifications - Measurement methods

TS EN 61169-29 Radio frequency connectors - Part 29: Part specification standard - Small radiofrequency coaxial connectors model screw, snap on, push-pull or quick-lock, sliding (rack and panel applications) - Characteristic impedance 50 ohm (type 1 , 0 / 2, 3) - 50 ohm and 75 ohm applications 

TS EN 61169-31 Radio frequency connectors - Part 31: Screw type radio frequency connectors with 1.0 mm (0.039 inch) diameter of the outer conductor - Characteristic impedance 50ohm (type 1.0) 

TS EN 61169-32 Radio frequency connectors - Screw type radio frequency connectors with 1.85 mm (0.072 inch) diameter of the outer conductor - Characteristic impedance 50 ohm (type 1.85) 

TS EN 61169-33 Radio frequency connectors - Part 33: Part specifications for Bma series rf connectors " 

TS EN 61169-36 Radio frequency connectors - Part 36: Part specifications for miniature coaxial rf connectors with characteristic impedance 50 ohms "

TS EN 61169-19: 2011 Radio frequency connectors - Part 18: Part feature standard - Type ssmb radio frequency uniaxial connectors 

TS EN 61169-38 Radio frequency connectors - Part 38: Part features - Radio frequency coaxial connector model, shift (rack and enclosure applications) - Characteristic impedance 50 ohm (type tma) - 50 ohm applications 

TS EN 61169-41: 2011 Radio-frequency connectors - Part 41: Part specifications for quick-locking coaxial cable connectors of the Cqa seiler

TS EN 61169-40: 2011 Radio-frequency connectors-Section 39: Part specifications for 2.4 series rf connectors 

TS EN 61169-39: 2011 Radio-frequency connectors-Section 39: Part specifications for quick-lock rf connectors of the Cqm series 

TS EN 61196-3 Radio frequency cables - Part 3: Cross-section of coaxial cables for local networks 

TS EN 61196-2 Cables - Radio-frequency cables - Part 2: Part specifications for polytetrafluoroethylene (ptfe) insulated semi-rigid radio frequency and coaxial cables 

TS EN 61196-3-3 Cables - Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor installations - Detail specification for local area networks up to 185 m and up to 10 mb / s 

TS EN 61196-3-2 Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal ground wiring - Detailed communication specifications for foam dielectric coaxial cables in local area networks up to 185 m in length and speed 10 mb / s

TS EN 61196-4 Coaxial communication cables - Part 4: Specification for radiating cables 

TS EN 61338-2 Waveguide dielectric resonators - Part 2: Guidelines for oscillator and filter applications 

TS EN 61338-1-3 Waveguide type dielectric renzonators - Part 3: General information and test conditions - Complex relative permeability measurement method for dielectric resonator materials at microwave frequency (ic 61338 -1-3: 1999) 

TS EN 61338-1 Waveguide type dielectric renzonators - Part 3: General information and test conditions - Complex relative permeability measurement method for dielectric resonator materials at microwave frequency 

TS EN 61338-1-4 Waveguide-type dielectric resonators - Part 1-4: General information and test conditions - Complex relative permeability measurement method for dielectric resonator materials of millimeter wave frequency 

TS EN 61580-1 Measurement methods for waveguides - Part 1: Separation and rotation of the polarization plane

TS EN 61580-2 Measurement methods for waveguides - Part 2: Level of intermediate modulation products 

TS EN 61580-3 Measurement methods for waveguides - Part 3: Change of group delay

TS EN 61580-8 Measurement methods for waveguides - Part 8: Energy holding capacity of waveguides 

TS EN 61580-9 Measurement methods for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces

TS EN 61935-3 Test procedure of a balanced and coaxial information technology cabling system - Wiring installed as specified in Part 3-En 50173 and related standards

TS EN 61935-1 General wiring systems - Specification for wiring tests according to ISO / IEC 801 - Part 1: Installed wiring 

TS EN 62012-1 Multi-core and symmetrical binary / quadruple cables for digital communications used in harsh environmental conditions - Part 1: General specification standard

TS EN 62153-1-1 Test methods of metallic communication cables - Part 1-1: Measurement of pulse / step return loss in the frequency domain using electrical-inverse different fourier transform (idft) (ic 62153-1: 2003) 

TS EN 62153-4-2 Test methods of metallic communication cables - Part 4-2: Electromagnetic compatibility (emu) - Screening and coupling attenuation - Injection clamp method (IEC 62153-4-2: 2003 / note: Approval information

TS EN 122001 Empty detail specification - Specification for radio frequency connectors specified by cecc (military) (type mil-C-39012) 

TS EN 122002 Blank detail specification: Radio frequency coaxial connectors 

TS EN 122110 Part specifications: Radio frequency coaxial connectors-Sma series 

TS EN 122120 Part specifications: Radio frequency coaxial connectors-Bnc series 

TS EN 122130 Part feature: Radio frequency coaxial connectors - Smb series 

TS EN 122140 Part feature: Radio frequency coaxial connectors-Smc series 

TS EN 122150 Part feature: Radio frequency coaxial connectors - Eia flange series 

TS EN 122160 Part specifications: Radio frequency coaxial connectors-Ssma series 

TS EN 122170 Part specifications: Radio frequency coaxial connectors - Ssmb series 

TS EN 122180 Part specifications: Radio frequency coaxial connectors-Ssmc series 

TS EN 122190 Part specifications: Radio frequency coaxial connectors - 7-16 series 

TS EN 122200 Part specifications: Radio frequency coaxial connectors - Tnc series 

TS EN 166100 Partial features: Surface acoustic wave filters (saw)