The standards required for Tools and Equipments are given below. We test, audit, inspect and certify all of the following standards.
TS EN 12325-1 Irrigation techniques - Central shaft and horizontal moving systems - Part 1: Technical specifications
TS EN 12324-4 Irrigation techniques - Machine systems - Part 4: Users checklist
TS EN 12325-3 Irrigation techniques - Circular and linear moving (central axis and laterally moving) systems - Part 3: Technical terms and classification
TS EN 12484-1 Irrigation techniques- Automatic peat irrigation systems- Part 1: Programming user devices
TSE-EEC-97-27: 2000 Council Regulation 70 dated July 156 and numbered 22 / 1997 / at which regulates the 97 / 27 / at regulation relating to the mass and dimensions of certain classes of trailers of motor vehicles.
TS EN 12484-2 Irrigation techniques - Automatic lawn irrigation systems section 2: Technical model type
TS EN 12484-3 Irrigation techniques - Automatic lawn irrigation systems section 2: Classification and design of technical model types
TS EN 12734 Irrigation techniques - Quick-connect pipes for mobile irrigation system - Technical specifications and testing
TS EN 12484-1 Irrigation techniques - Automatic lawn irrigation systems - Part 1: Defining the hardware program by the employer
TS EN 12734 Irrigation techniques - Quick connection pipes for mobile irrigation systems - Technical characteristics and testing
TS EN 12484-4 Irrigation techniques - Automatic lawn irrigation systems - Part 4: Plant and acceptance
TS 7271-1 EN ISO 8224-1 Mobile irrigation machines - Part 1: Operating characteristics and laboratory and field test methods
TS EN 12484-4 Irrigation techniques - Automatic lawn irrigation systems - Part 4: Installation and acceptance procedures
TS EN 12484-5 Irrigation techniques - Automatic lawn irrigation systems - Part 5: Systems test method
TS EN 14049 Density of water applications - Calculation method and measurement methods
TS EN 60335-2-70 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-70: Particular requirements for milking machines
TS EN 60335-2-87 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-87: Particular requirements for electric animal shakers
TS 10279 ISO 5353: 1996 / T1 (Number modification, TS 10279 EN ISO 5353) Construction and excavation machinery, tractors, agricultural and forestry machinery - seat reference point
TS EN 13742-1 Irrigation techniques - Set of rigid sprinkler head systems - Part 1: Selection, design, planning and installation
TS EN 14049 / A1 Irrigation techniques - Density of water applications - Calculation method and measurement methods
TS ISO 5673-1 Tractors and machinery - PTO driven shafts and power input connection - Part 1: General manufacturing and safety requirements
TS EN 15097 Irrigation techniques -Localized irrigation -Hydraulic measurement
TS EN 14267 + AC Irrigation techniques - Irrigation hydrants
TS ISO 8210 - Harvesters - Combine harvesters - Testing
TS 13527 Binding machine
TS EN 15099-1 Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1: General considerations
TS EN 14268 + AC Irrigation techniques - Irrigation water meters
TS EN 15097 Irrigation techniques - Local irrigation - Hydraulic evaluation
TS ISO 4253 Wheel tractors - Driver seat - Dimensions
TS 368 Agricultural machinery -Discs
TS ISO 5673-2 Tractors and machinery for tractors - PTO driven shafts and power input connection - Part 2: Specification for PTO driven line position, safety clearance and power input connection (PIC) for different equipment with use of PTO driven shafts
TS EN 707 + A1 Agricultural machinery - Slurry tankers - Safety regulations
TS EN 1218-3 + A1 Safety in woodworking machines - Mortising machines - Part 3: Sliding table hand-fed mortising machines for cutting timber
TS EN 609-2 + A1 Agricultural and forestry machinery - Safety in wood splitters - Part 2: Screw splitters
TS EN 1853 + A1 Agricultural machinery - Tipper trailers - Safety
TS EN 1853 + A1 Agricultural machinery - Tipper trailers - Safety
TS EN 786 + A2 Garden equipment - Electrically driven, pedestrian-controlled and hand-held grass shears and edge grass shears - Mechanical safety
TS EN 13448 + A1 Agricultural and forestry machines-Row mowing units-Safety
TS EN 12733 + A1 Agricultural and forestry machines - Pedestrian mowers - Safety
TS EN 13140 + A1 Agricultural Machinery - Sugar Beet and Beet Harvesters - Safety
TS 4807 Agricultural machinery - Sprayers - Suspended, PTO
TS EN 60745-2-15 Hand-held motor-driven power tools - Safety - Part 2-15: Particular requirements for hedge mowers (IEC 60745-2-15: 2006, modified)
TS EN 703 + A1 Agricultural machinery and equipment - Silage loading, mixing and / or chopping and dispensing machines - Safety
TS EN ISO 14982 Agricultural and forestry machinery-Electromagnetic compatibility-Test methods and acceptability criteria
TS EN 12733 + A1 Agricultural and forestry machines - Pedestrian mowers - Safety
TS EN 706 + A1 Agricultural machinery - Hanging machines - Safety rules
TS EN 707 + A1 Agricultural machinery - Slurry tankers - Safety regulations
TS EN 909 + A1 Agricultural and forestry machinery - Circular and linear mobile irrigation systems (machines) - Safety
TS EN 609-2 + A1 "Agricultural and forestry machinery - Safety in wood splitters - Part 2: Screw splitters"
TS EN 1853 + A1 Agricultural machinery - Tipper trailers - Safety
TS EN 13118 + A1 Agricultural machinery-Potato harvesters-Safety
TS EN 13525 + A2 Forestry equipment and machinery - Wood chippers - Safety
TS EN ISO 11680-1 Forestry machinery - Safety requirements and test procedure for pole mounted motor pruners - Part 1: Machines equipped with internal combustion engines
TS EN ISO 11680-2 Forestry machinery - Safety requirements and test procedure for pole-mounted motor pruners - Part 2: Back-mounted power welding machines
TS EN ISO 11681-1 Forestry machines - Chain saw - Safety rules and test procedure - Part 1: Chain saws used in forestry
TS EN ISO 11806-1 Agricultural and forestry machinery - Safety requirements and test procedure for portable, hand-held, motor bush cutters and mowers - Part 1: Machines equipped with an integrated internal combustion engine
TS EN 12525 + A2 Agricultural machinery - Front loaders - Safety
Hand held, motor-driven electrical tools - Safety - Part 60745-2: Special rules for blades
TS EN 60745-2-15 / A1 Hand-held motor-driven power tools - Safety - Part 2-15: Particular requirements for hedgecutters
TS EN ISO 4254-5 / AC: 2010 Agricultural machinery - Safety - Part 5: Tail shaft driven tillage machines
TS EN ISO 4254-10 / AC Agricultural machinery - Safety - Part 10: Rotary tillage machines and rakes
TS EN 60335-2-77 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-77: Particular requirements for mains-operated pedestrian-controlled lawnmowers
tst EN 60335-2-77 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-77: Particular requirements for mains-operated pedestrian-controlled lawnmowers
2009 / 75 / EC The 13 / 2009 / horse directive of the European Parliament and of the Council of 2009 of July 75 (text relates to aea) concerning the static tests of overturning protection frames of wheeled agricultural and forestry tractors
2009 / 64 / EC Directive 13 / 2009 / ec of the European Parliament and of the Council of July 2009 for the elimination of radio interference (electromagnetic compatibility) produced by agricultural or forestry tractors
2009 / 64 / EC Directive 13 / 2009 / ec of the European Parliament and of the Council of July 2009 for the elimination of radio interference (electromagnetic compatibility) produced by agricultural or forestry tractors
TS EN 60745-2-13 / A1 Hand-held power tools - Safety - Part 2-13: Particular requirements for chain saws
TS EN ISO 10748: 2011 Shoe-Test methods for zippers- Zipper locking strength
TS EN ISO 5674 Agricultural and forestry machinery - Tractors and machinery - Articulated shaft housing - Strength and wear tests and acceptance criteria
TS EN ISO 11681-2 Forestry machines - Chain saw - Safety rules and test procedure - Part 2: Chain saws for wood cutting
TS EN 60745-2-22 Hand-held power tools - Safety - Part 2-22: Particular requirements for cutting machines
TS EN ISO 11806-2 Agricultural and forestry machinery - Safety requirements and test procedure for portable, hand-held, motor bush cutters and mowers - Part 2: Machines used with back-mounted power unit
TS 5152 Leveling shovels (used with farm tractors)
8224 - 1: 2003 / A1 Mobile irrigation machines - Part 1: Operating characteristics and laboratory and field test methods
TS EN 13739-1 Agricultural machinery - Solid manure spreaders and full-width fertilizer spreaders - Environmental protection - Part 1: Rules
TS EN 13739-2 Agricultural machinery - Solid manure spreaders and full-width fertilizer spreaders - Environmental protection - Part 2: Test methods
TS EN 15695-2 / AC Farm tractors and self-propelled sprayers - Protection of the operator against dangerous substances - Part 2: Filters, rules and test procedures
TS EN ISO 11681-1 Machinery for forestry - Portable chain saws - Safety rules and tests - Part 1: Chain saws for forestry
TS EN ISO 11681-2 Machinery for forestry - Portable chain saws - Safety rules and tests - Part 2: Chain saws for wood cutting
tst EN 836 + A4 (2.Priority) Gardening equipment - Motorized lawn mowers - Safety
TS EN ISO 11806-1 Agricultural and forestry machinery - Safety requirements and test for portable and hand-held bush cutters and grass machines - Part 1: Machines equipped with an integral combustion engine
TS EN ISO 11850: 2011 (EN) Forestry machinery - General safety rules
TS EN 13739-2 / AC Agricultural machinery - Solid manure spreaders and full-width fertilizer spreaders - Environmental protection - Part 2: Test methods
TS EN ISO 22867 Forest and garden machines - Vibration test code of hand-held internal combustion engine machines - Vibration in the stems
TS EN ISO 5674 / tst T1 Agricultural and forestry machinery - Tractors and machinery - Articulated drive shaft housing - Strength and wear tests and acceptance criteria
tst 201290540 Hazelnut patter machine
TS EN ISO 22868 Forest and horticultural machinery - Noise test code for hand-held machines with internal combustion engines - engineering method (accuracy 2)
TS EN ISO 11806-2 Agricultural and forestry machinery - Safety requirements and test for portable and hand-held bush cutters and grass machines - Part 2: Back-mounted power-welded machines
TS EN ISO 11680-1 Forestry machinery - Safety rules and test procedure for pole mounted motor pruners - Part 1: Units equipped with internal combustion engines
TS EN ISO 11680-2: 2011 (EN) Forestry machinery-Safety rules and test procedure for pole-mounted motor pruners-Section 2: Back-mounted power supply units
TS ISO 6531 Forestry machines - Portable chain saws - Terms and descriptions
TS EN 60745-2-15 Hand-held, motor-driven power tools - Safety - Part 2-15: Particular requirements for blades
TS EN 709 + A4 / AC Agricultural and forestry machinery - Rotary cultivators, motor hoes, pedestrian-controlled tractors with driven wheeled hoes - Safety
TS EN 709 + A4 / AC Agricultural and forestry machinery - Rotary cultivators, motor hoes, pedestrian-controlled tractors with driven wheeled hoes - Safety
Agricultural and forestry machinery - Rotary cultivators, motorized hoes, pedestrian-controlled tractors with driven wheeled hoes - Safety
Agricultural and forestry machinery - Rotary cultivators, motorized hoes, pedestrian-controlled tractors with driven wheeled hoes - Safety
TS EN 16246: 2012 (EN) Agricultural machinery - Backhoes - Safety
TS ISO 7867-1 Tires and wheels for agricultural tractors and machinery (metric series). Chapter 1: Tire designation, dimensions and marking, tire / rim coordination
TS EN 60745-2-22: 2011 / A11 Hand-held power tools - Safety - Part 2-22: Particular requirements for cutting machines
TS EN ISO 16119-1 Agricultural and forestry machinery - Environmental requirements for sprayers Section 1: General
TS EN ISO 4254-12 Agricultural machinery and equipment - Rotary mowers and impact mowers - Safety
TS EN ISO 16119-2 Agricultural and forestry machinery - Environmental requirements for sprayers Part 2: Horizontal boom sprayers
TS EN ISO 16119-3 Agricultural and forestry machinery - Environmental requirements for sprayers Part 3: Sprayers for shrubs and trees
TS 4808 Agricultural machinery - Sprayers - Towed shaft
TS 8136 Star wheeled rakes (used with agricultural tractors)
TS 12658 Authorized services - Agricultural equipment and machinery - Rules for transport and transportation equipment
TS EN 12965 + A2 Agricultural and forestry machinery - Tractors, tools and machines - PTO driven articulated shafts and guards - Safety
TS 6424 Precision sowing machines test methods
TS 5690 Agricultural machinery-Line sowing machines-Used by tractor
TS EN ISO 5395-1 Garden equipment - Safety requirements for internal combustion engine mowers - Part 1: Terminology and general tests
TS EN ISO 4254-6 / AC Agricultural machinery - Safety - Part 6: Sprayers and liquid manure spreaders
TS EN ISO 5395-1 Garden equipment - Safety rules for internal combustion engine mowers - Part 1: Terminology and common tests
TS 11216 Agricultural machinery-Mowers-Leaf blades
TS 4891 Sugar beet harvesters
TS 11943 Agricultural machinery-Straw chopper
TS 6426 Hoeers (used by tractor)
TS 6736 Rotary hoes (used by tractor)
TS 5295 Disc harrows
TS 6428 Patetes harvesters
tst 5296 Heavy disc harrows (goble-Disc)
TS 10749 Agricultural machinery - Straw picker
tst 13531 Feed crushing machine (with stone or hammer)
TS 5243 Agricultural machinery - Motorized garden sprayers
TSE K 229 Rice seedling planting machine
TSE K 233 Fruit Harvesting Machine
TSE K 222 Forage Harvester
TSE K 231 Stone picker
TSE K 228 Farm Manure Spreading Machine
TSE K 232 Connectors
TSE K 223 Baling Machine
TS 13628 Plows (Used with Tractor)
TS EN ISO 5395-2 Garden equipment - Safety regulations for internal combustion engine mowers - Part 2: Pedestrian-controlled lawnmowers
TS EN ISO 5395-3 Gardening equipment - Safety regulations for internal mowers - Part 3: Lawnmowers with driver's seat
TS EN 690 Agricultural machinery-Farm manure spreaders-Safety
tst 368 duplicate Agricultural machinery -Discs
TS 6425 Seed drill test methods
TS EN ISO 5395-2 Gardening equipment - Safety rules for internal combustion engine mowers - Part 2: Foot-controlled lawnmowers
TS EN ISO 5395-3 Gardening equipment - Safety regulations for internal mowers - Part 3: Lawnmowers with driver's seat
TS EN ISO 10517 / A1 Hand-held power shears - Safety
TS EN 690 Agricultural machinery-Farm manure spreaders-Safety
TSE K 239 Branch Shredders
TSE K 282 Ground Mill
TS EN ISO 4254-10 Agricultural machinery - Safety - Part 10: Rotary tillage machines and rakes
TS EN ISO 4254-11 Agricultural machinery - Safety-Section 11: Balers
TS EN ISO 4254-12 Agricultural machinery - Safety - Part 12: Rotary blades and drum mowers and impact mowers
TS EN ISO 4254-5 Agricultural machinery - Safety - Part 5: Tail shaft driven tillage machines
TS EN ISO 4254-6 Agricultural machinery - Safety - Part 6: Sprayers and liquid manure spreaders
TS EN ISO 4254-7 Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesting machines
TSE K 252 GPS / GNSS and grain meter used in harvesting
TSE K 237 Motorized Scythe
TSE K 255 Hand tractor
TSE K 241 File System Installation
TS EN ISO 4254-5 / AC Agricultural machinery - Safety - Part 5: Tail shaft driven tillage machines
TS EN ISO 4254-6 / AC Agricultural machinery - Safety - Part 6: Sprayers and liquid manure spreaders
TS 7512 Baler
tkt 201496879 Precision sowing machines
tkt 201495918 Stubble direct sowing machine
TS 585 Agricultural trailers
TS EN 50434 Safety rules - For electrical appliances used in households and similar places - Special rules for network shredders and cutters
TS EN 50636-2-91 Safety rules - For electrical appliances used in households and similar places - Part 2-91: Particular requirements for lawnmowers and lawn mowers that are walked behind and used by hand
TS EN 50636-2-92 Safety rules - For electrical appliances used in households and similar places - Part 2-92: Particular requirements for pedestrian-controlled, mains-operated grass scrapers and ventilation machines
TS EN 50636-2-94 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-94: Particular requirements for scissors
TS EN 50636-2-100 Safety rules - For electrical appliances used in households and similar places - Part 2-100: Particular requirements for handheld, mains-operated, garden air blowers, vacuumers and blowers / vacuumers
TS ISO 15077 Agricultural and forestry machinery tractors and self-propelled machines-Operator controls-Actuating forces position change position and operation method.
TS EN 16590-1 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1: 2010 modified)
TS EN 16590-2 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 2: Concept display phase (ISO 25119-2: 2010 modified)
TS EN 16590-3 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3: 2010 modified)
TS EN 16590-4 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 4: Manufacturing, operation, modification and support processes (ISO 25119-4: 2010 modified)
TS EN 13739-1 Agricultural machinery - Solid fertilizer spreaders and full-width fertilizer spreaders - Environmental protection - Part 1: Rules
TS 12600 Authorized services - Livestock machinery - Rules
TS 12534 Authorized services - Agricultural equipment and machinery - Sowing, planting and fertilizing machines - Rules
TS 1137 Agricultural machinery - Ears plows
TS EN 14018 + A1 Agricultural and forestry equipment - Sowing and planting machines - Safety
tst EN 50434 Safety rules - For electrical appliances used in households and similar places - Particular requirements for network shredders and cutters
tst EN 50636-2-100 Safety rules - For electrical appliances used in households and similar places - Part 2-100: Particular requirements for handheld, mains-operated, garden air blowers, vacuumers and blowers
tst EN 50636-2-91 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-91: Particular requirements for lawnmowers and lawn mowers guided behind and used by hand
tst EN 50636-2-92 Safety regulations - For electrical appliances used in households and similar places - Part 2-92: Particular requirements for pedestrian-controlled, mains-operated grass scrapers and ventilation machines
tst EN 50636-2-94 Safety regulations - For electrical appliances used in domestic and similar areas - Part 2-94: Particular requirements for scissors
TS EN 15811 Agricultural machinery - Housings for moving live parts - Instrument opening
TS EN ISO 16119-4 Environmental requirements for agricultural and forestry sprayers Section 4: Fixed and Semi-mobile sprayers (ISO 16119-4: 2014)
TS EN 50636-2-107 Safety regulations - For household appliances and similar - Part 2-107: Particular requirements for battery-powered robotic electric lawnmowers
TS 13628 / T1 Plows (Used with Tractor)
TS 12659 Authorized services - Plant protection equipment - Rules
TS 11943 / T1 Agricultural machinery - Stalking machine
TS 5295 / T1 Disc harrows
tkt 2015101916 CORN HARVEST TRAY
TS EN ISO 10517 / A1 Hand-held motorized shears - Safety (1) (ISO 10517: 2009)
TS EN ISO 10517 Hand-held power shears - Safety
TS ISO 15077 Agricultural machinery - Tractors and self-propelled machines - Operator controls - Actuating forces, position change, position and operating method
tkt 2015102000 MILL LINING PLATES
TS 12531 Authorized services - Tillage equipment - Rules
TS ISO 11783-2 Agricultural and forestry machinery and tractors - Serial control and communication of the data network - Part 2: Physical layer
TS ISO 6814 Forestry machinery - Portable and self-propelled equipment - Terms, recipes and classification
TS ISO 20019 / Tech.Cor.1 Agricultural vehicles - Mechanical couplings on traction vehicles - Towing ring dimensions
TS ISO 19932-1 Plant protection equipment - Tread sprayers - Part 1: Rules and test methods
TS ISO 19932-2 Plant protection equipment - Tread sprayers - Part 2: Performance limits
TS ISO 13457 Agricultural irrigation equipment - Water driven chemical spray pumps
TS ISO 9635-1 Agricultural irrigation equipment - Irrigation valves - Part 1: General rules
TS ISO 9635-2 Agricultural irrigation equipment - Irrigation valves - Part 2: Release valves
TS ISO 9635-3 Agricultural irrigation equipment - Irrigation valves - Part 3: Check valves
TS ISO 9635-4 Agricultural irrigation equipment - Irrigation valves - Part 4: Air valves
TS ISO 9635-5 Agricultural irrigation equipment - Irrigation valves - Part 5: Control valves
TS ISO 6535 Forestry machines - Chain saws - Chain brake performance
TS ISO 6533 Forest machines - Chain saw with front hand protector - Dimensions and gaps
TS ISO 7914 / Amd.1 Forestry machines - Chain saws - Handle clearance and dimensions, smallest
TS ISO 11783-2 / Tech.Cor.1 Agricultural and forestry machinery and tractors - Serial control and communication of data network - Part 2: Physical layer
TS ISO 20019 / Cor.1 Agricultural vehicles - Mechanical couplings on traction vehicles - Towing ring dimensions
TS ISO 7914 / Amd 1 Forestry machines - Chain saws - Handle clearance and dimensions, smallest
TS ISO 11783-2 / Cor 1 Agricultural and forestry machinery and tractors - Serial control and communication of the data network - Part 2: Physical layer
TS ISO 12140 Agricultural machinery - Trailers and trailer trailers - Towing jacks
TS ISO 8779 Plastic pipe systems - Polyethylene (pe) pipes for irrigation systems - Specifications
TS ISO 8779 / A1 Plastic pipe systems - Polyethylene (PE) pipes for irrigation systems - Specifications
TS ISO 8796 Polyethylene PE 32 and PE 40 pipes - For irrigation channels - Sensitivity to circumferential stress cracking caused by plug-in fittings - Test method and features
TS 2384 Agricultural machinery - Cultivators (for tractors)
TS ISO 19472: 2006 Forestry machines - Winners - Dimensions, performance and safety
TS ISO 19472: 2006 / Cor 1: 2006 Machines for forestry - Winners - Dimensions, performance and safety; Technical Fix 1
TS EN ISO 16122-2 Agricultural and forestry machines - Inspection of sprayers in use - Horizontal arm sprayer
TS EN ISO 16122-3 Agricultural machinery - Inspection of sprayers in use - Part 3: Sprayers for shrubs and fruit trees
TS EN ISO 16122-4 Agricultural machinery - Inspection of sprayers in use - Part 4: Stationary and semi-mobile spraying
TS EN ISO 16122-1 Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General
TS EN ISO 17962 Agricultural machinery - Equipment for sowing - Reduction of environmental impacts of pneumatic systems fan exhaust (ISO 17962: 2015)
TS ISO 3767-2 Tractors, agricultural and forestry machinery-Motorized lawn mowers and garden equipment-Symbols for driver controls and other indications section 2-Symbols for agricultural tractors and machinery
TS ISO 3767-1 Tractors, agricultural and forestry machinery-Motorized lawnmower and horticultural equipment-Symbols for driver controls and other indications-Section 1: General symbols
TS 7389 Silage machines inspection and testing methods
tst 9658 Protective frames and cabs (for farm tractors)
tst 3862 Agricultural and forestry machinery - Tractors, tools and machines - Classification
TS ISO 13460-1 Agricultural irrigation equipment - Plastic saddles - Part 1: pressure-resistant pipes made of polyethylene
TS ISO 13460-1 Agricultural irrigation equipment - Plastic saddles - Part 1: pressure-resistant pipes made of polyethylene
tst 2016106021 Olive sorting machine
TSE K 222 / T1 Forage harvester - Performance rules
TS 5295 / tst T2 Disc harrows
TS 5152 / tst T1 Leveling shovels (used with farm tractors)
TS EN 13683: 2003 + A2: 2011 / AC Garden equipment - Combination shredders / cutters - Safety
TS EN ISO 16231-2 Self-propelled agricultural machinery -Stability assessment - Part 2: Determination of static stability and test procedures
TS EN ISO 16230-1 Agricultural machinery and tractors-Safety-High-voltage electrical and electronic components and systems- Part 1: General requirements
TS EN ISO 11850 / A1 Forestry machinery - General safety rules
TS EN ISO 4254-1 Agricultural machinery-Safety - Part 1: General rules
TS EN 15694 + A1 Agricultural and forestry tractors - Passenger seat - Rules and test procedures
TS EN 15503 + A2 Garden equipment - Garden blowers, vacuumers and blowers / vacuumers - Safety
TSE K 240 Agricultural Products Drying Machine
TSE K 240 Agricultural Products Drying Machine
tst EN ISO 16122-2 Agricultural and forestry machinery - Inspection of sprayers in use - Horizontal arm sprayer
tst EN ISO 16122-1 Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General
tst EN ISO 16122-3 Agricultural machinery - Inspection of sprayers in use - Part 3: Sprayers for shrubs and fruit trees
tst EN ISO 16122-4 Agricultural machinery - Inspection of sprayers in use - Part 4: Stationary and semi-mobile spraying
tst EN ISO 17989-1 Sustainability - tractors and machinery for agriculture and forestry Part 1: Principles
tst EN 15503 + A2 Garden equipment - Garden blowers, vacuumers and blowers / vacuumers - Safety
tst EN ISO 11850 Forestry machinery - General safety rules
tst EN ISO 11850 / A1 Forestry machinery - General safety rules
tst EN ISO 4254-1 Agricultural machinery-Safety - Part 1: General rules
TS EN 15694 + A1 Agricultural and forestry tractors - Passenger seat - Rules and test procedures
TS ISO 16399 Counters for irrigation water
TS 5690 / T1 Agricultural machinery-Line sowing machines-Used by tractor
TS EN ISO 4254-14 Agricultural Machinery-Safety- Bale Wrapping
TS EN 50632-2-17 Electric motor powered tools - Dust measurement process - Part 2-17: Specific requirements for hand mills and grinders
TSE K 240 / T1 Agricultural Products Drying Machine
TSE K 240 / T1 Agricultural Products Drying Machine
tst EN ISO 4254-14 Agricultural Machinery-Safety-Bale Wrapping
TS EN ISO 1401 Rubber hoses for agricultural spraying
TS EN ISO 1401 Rubber hoses for agricultural spraying
TS EN 609-1 Agricultural and forestry machinery - Safety section in wood splitters: 1 wedge splitters
Garden equipment - Safety regulations for internal combustion engine mowers - Part 5395: Foot-controlled lawnmowers TS EN ISO 2-1 / A2
TS EN 609-1 Agricultural and forestry machinery - Safety section in wood splitters: 1 wedge splitters
Garden equipment - Safety regulations for internal combustion engine mowers - Part 5395: Foot-controlled lawnmowers TS EN ISO 2-1 / A2
TS EN ISO 5395-3 / A1 Garden equipment - Safety regulations for internal combustion engine mowers - Part 3: Lawnmowers with driver seat
TS EN ISO 13693-1 Irrigation equipment - Chemical safety devices - Part 1: Small plastic valves against chemicals
TSE K 222 Forage Harvester
The 2003 / 37 / EC 74 / 150 / 26 / 2003 may Regulation 2003 / at.
TS HD 400.3N S2 Hand-held power tools - Part 2: Particular requirements - Part n: Hedge trimmer and scissors
TS 557-3 ISO 500-3 Wheel tractors - Tail shafts - Type 1, type 2 and type 3 - Part 3: Main PTO and key sizes, PTO
TS 557-2 ISO 500-2 Farm tractors - Tail shafts - Type 1, type 2 and type 3 - Part 2: Narrow track tractors - Main protective and safety zone dimensions
TS 581 Anchor housings
TS 584 Agricultural machinery-Hand tools-Pitches
TS ISO 706 Rubber latex - Determination of coagulant content (sieve residue)
TS EN 706 + A1 Agricultural machinery - Hanging machines - Safety rules
TS EN 709 + A4 Agricultural and forestry machinery - Rotary cultivators, motorized hoes, pedestrian-controlled tractors with driven wheeled hoes - Safety
TS EN 709 + A4 Agricultural and forestry machinery - Rotary cultivators, motorized hoes, pedestrian-controlled tractors with driven wheeled hoes - Safety
TS EN 786 + A2 Garden equipment - Electrically driven, pedestrian-controlled and hand-held grass shears and edge grass shears - Mechanical safety
TS ISO OECD 789-10 Farm tractors - Test procedures - Part 10: Hydraulic power in the tractor / tool intermediate direction
TS ISO 789-1 Wheel tractors - Test procedures - section 1: PTO power tests
TS ISO 789-2 Wheel tractors - Test procedures - part 2: Rear three-point suspension system lift capacity
TS ISO 789-3 Farm tractors - Test procedures - Part 3: Circle and safe circle diameters
TS ISO 789-5 Farm tractors - Test operations - Part 5: PTO partial power - Non-mechanical power transmission
TS ISO 789-6 Wheel tractors - Test procedures - Part 6: Center of gravity
TS ISO 789-7 Farm tractors - Test procedures - Part 7: Determination of axle force
TS ISO 789-8 Wheel tractors - Test procedures - Part 8: Engine air filter
TS ISO 789-9 Wheel tractors - Test procedures - Part 9: Drawbar power tests
TS ISO 789-11 Wheel tractors - Test procedures - part 11: Steering capability of wheeled tractors
TS ISO 789-12 Farm tractors - Test procedures - Part 12: Low temperature operation
TS 2385 Tractors-Two wheels (inspection and test principles)
TS 2541 Agricultural machinery centrifugal chemical fertilizer spreaders-Test methods
TS 3000 Scythe and sickles
TS 3100 Agricultural machinery-Mowers-Finger mowers
TS 3102 Remote control hydraulic cylinders for tractors - tractors (dimensions and specifications)
TS 3222 Hand-held threshing machines inspection and test methods
TS 3379 Terms related to the tools and machinery used in viticulture and wine production
TS 3379 / T1 Terms of tools and machinery used in viticulture and wine production
TS 3413 Agricultural machinery-Trailers and water tankers- Inspection and test methods
TS 3413 Agricultural machinery-Trailers and water tankers- Inspection and test methods
TS 3414 Water tankers, agricultural
TS ISO 3463 Agricultural and forestry machinery - Wheeled tractors - Protective structures, dynamic test method and acceptance requirements
TS ISO 3463 Agricultural and forestry machinery - Wheeled tractors - Protective structures, dynamic test method and acceptance requirements
TS 3480 Hand harrows
TS 3566 Agriculture and forestry tractors and machinery - Driver's manual and other technical publications
TS 3566 Agriculture and forestry tractors and machinery - Driver's manual and other technical publications
TS 3605 Rollers (used in agriculture)
TS 3678 Cultivators
TS 3692 Rakes (used in seed bed preparation) terms and definitions
TS 3693 Rakes (used in grass mechanization) terms and definitions
TS 3747 Dimensions for mechanical loading of agricultural tools and machines and bulk grain products
TS 3748 Cultivator mooring dimensions of narrow end bars and legs
TS 3755 Terms and definitions of plows
TS ISO 3767-3 (Formerly: TS EN ISO 3767-3) Tractors, agricultural and forestry machinery-Motorized lawn mowers and garden equipment-Symbols for driver controls and other demonstrations-Part 3: motorized lawn mowers and garden equipment Symbols for
TS ISO 3767-4 (Formerly: TS EN ISO 3767-4) Tractors, agricultural and forestry machinery-Motorized lawn mowers and garden equipment-Symbols for driver controls and other demonstrations-Section 4: symbols for forestry machinery
TS ISO 3767-5 (Formerly: TS EN ISO 3767-5) Tractors, agricultural and forestry machinery -Motorized lawn mowers and horticultural equipment -Symbols for driver controls and other indications section 5: Symbols for hand-held forestry machinery
TS EN ISO 3767-3 / T1 (Number modification: TS ISO 3767-3) Tractors, agricultural and forestry machinery-Motorized lawn mowers and garden equipment-Symbols for driver controls and other demonstrations-Section 3: Motor lawnmowers and symbols for garden equipment
TS EN ISO 3767-4 / T1 (Number modification: TS ISO 3767-4) Tractors, agricultural and forestry machinery -Motorized lawn mowers and garden equipment-Symbols for driver controls and other demonstrations-Section 4: Symbols for forestry machinery
TS EN ISO 3767-5 / T1 (Number modification: TS ISO 3767-5) Tractors, agricultural and forestry machinery -Motor lawn mowers and horticultural equipment -Symbols for driver controls and other demonstrations section 5: Symbols for hand-held forestry machinery
TS ISO 3795 Road vehicles, agricultural and forestry machinery and tractors - Determination of combustion behavior of internal materials
TS 3828 Grape harvesting machine tests
TS 3862 Agricultural and forestry machinery - Tractors, tools and machines - Classification
TS ISO 20019 Agricultural vehicles - Mechanical couplings on traction vehicles - Towing ring dimensions
TS 3864-2 ISO 6489-2 Agricultural vehicles - Mechanical connections between towing and towing vehicles - part 2: 40 mm worm mouth connection features
TS 3864-1 ISO 6489-1 Agricultural machinery - Mechanical connections between tractor and towed vehicles - part 1: Tow hook dimensions
TS ISO 6489-3 Agricultural vehicles - Mechanical connections between towing and towing vehicles - part 3: Tractor drawbar
TS 3866 Inspection and test methods of grape presses
TS 3879 Vibration tests affecting the drive of agricultural tractors and machines
TS 3890 Agricultural machinery - Hoe legs - For tractors
TS ISO 3965 Wheeled tractors - The highest speed determination method
TS 3980 Harvesting and threshing machines
TS 3999 Terms and definitions related to agricultural tractors
TS 4077 ISO 5681 Terms and definitions of plant protection equipment and machinery
TS EN ISO 4167 Polyolefin agricultural cords
TS 4232 Potato planting machines-Test methods
TS EN ISO 4254-10 Agricultural machinery - Safety - Part 10: Rotary tillage machines and rakes
TS EN ISO 4254-5 Agricultural machinery - Safety - Part 5: Tail shaft driven tillage machines
TS EN ISO 4254-7 / AC: 2010 Agricultural machinery - Safety - Part 6: Combine harvesters, forage harvesters and cotton harvesting machines
TS EN ISO 4254-6 Agricultural machinery - Safety - Part 6: Sprayers and liquid manure spreaders
TS EN ISO 4254-7 Agricultural machinery - Safety - Part 6: Combine harvesters, forage harvesters and cotton harvesting machines
TS EN ISO 4254-5: 2009 / AC: 2011 Agricultural machinery - Safety - Part 5: Tail shaft driven tillage machines
TS 4280 Sprayer nozzles
TS 4384 Method of coding the suitability of suspended agricultural tools and machines to the tractor
TS 4450-1 ISO 6689-1 Harvesters - Combine harvesters and functional elements - Part 1: Terms and definitions
TS 4450-2 ISO 6689-2 Harvesters - Combine harvesters and functional elements - Part 2: Evaluation of characteristics and work efficiency defined in terms
TS 4597 Test methods for mines pumps
TS 4928 Pollinators - Carrying on back (without motor)
TS 4976 Wooden elements - used in agricultural tools and machines
TS ISO 5007 Wheeled tractors - Operator's seat - Laboratory measurement of transmitted vibration
TS 5088 Submersible
TS 5099 Agricultural machinery - Atomizers - Motor, back-mounted
TS ISO 5131 Acoustics -Tractors and machines used in agriculture and forestry -Measuring the noise in the operator position-Observation method
TS 5296 Heavy disc harrows (goble-Disc)
TS 5418 Brush and elements (for grain cleaning machines)
TS 5420 Throat filling unit (used in agriculture)
tkt 200977302Vacuum (suction) Sieve System HazelnutTop Vacuum Suction System
TS 5543 Hand threshing machine
tst ISO 5670 An effective telescopic tilting rollers used in agricultural trailers, 25 mpa (250 bar) series type 1 and type 2
TS EN ISO 5674 Agricultural and forestry machinery - Tractors and machinery - Articulated drive shaft housing - Strength and wear tests and acceptance criteria
TS 5675 Fertilizer spreaders-Centrifugal, chemical
TS ISO 5692-2 Agricultural vehicles - Mechanical couplings on traction vehicles - Part 2: 40 connecting ring with inner diameter mm
TS ISO 5721 Wheel tractors - Driver field of view
TS 5776 Lighting, lighting and signaling rules for agricultural machinery
TS 6086 Entry
TS 6161 Forestry machines - Chain saws
TS 6423 Grain cleaning machines terms and definitions
TS ISO 7112 Forest machines-Portable, hand-held shrub cutters and lawn pruners-Terms and recipes
TS ISO 7113 Forestry machinery-Portable cutting equipment for hand-held shrub cutters-One piece metal blades
TS 7134 Test methods of granulated drug dispensers used to combat plant diseases and pests
TS ISO 7749-1 Agricultural irrigation equipment -Rotary sprinkler heads section 1: Design and operation rules
TS 7272 Hydraulic control terms and definitions of automatic irrigation systems
TS 7274 Safety rules for non-aqueous ammonia dispensers used in agriculture
TS 7276 Potato planting machines
TS 7389 Silage machines inspection and testing methods
TS 7622 Milling cutters (for earth cutters)
TS ISO 7714 Valves - Volumetric valves - Used in agricultural irrigation equipment - General specifications and test methods
TSE EEC / 77 / 311: 2001 Council regulation Council regulation 29 / 1977 / at dated 77 / March 311 on the approximation of the laws of the Member States relating to the level of noise perceived by the driver of motorized wheeled agricultural or forestry tractors
TSE EEC / 77 / 536: Regulation 2001 / 87 / at and 354 / 89 / at and 680 / 1999 / at and 55 / 28 / at and 1977 / 77 / at Council regulation 536 date and XNUMX / XNUMX / at
TS 7885 Grass shears (hand operated, without motor)
TS ISO 7914 Forestry machines - Chain saws - Handle clearance and dimensions, smallest
TS ISO 7915 Forestry machines - Chain saws - Determination of grip strength
TS ISO 7918 Forestry machines - Portable bush choppers and bush shears - Cutting deck housing dimensions
TS 8202 Straight blades - for disc and drum mowers
TS ISO 8210 Harvesters - Combine harvesters - Testing
TS ISO 8334 Forestry machines - Chainsaws - Balance determination
TS ISO 8380 Forestry machines - Portable bush choppers and grass shears - Cutter housing strength
TS 8425 Hydraulic cylinders - an effective - telescopic - used in agricultural trailers
TS 8425 / T1 Hydraulic cylinders - One effective - Telescopic - Used in agricultural trailers
TS 8732 Seed collection equipment - Branch traction hook
TS ISO 8759-1 Wheeled tractors - Front mounted equipment - Part 1: PTO and three-point linkage
TS ISO 8759-2 Wheeled tractors - Front mounted equipment - Part 2: Fixed equipment connection
TS ISO 8893 Forestry machines-Portable shrub cutters-Engine performance and fuel consumption
TS ISO 8893 Forestry machines-Portable shrub cutters-Engine performance and fuel consumption
TS ISO 8935 Agricultural and forestry tractors - Mounting holes and openings for external equipment controls
TS EN ISO 9261 (Formerly: TS ISO 9261) Agricultural irrigation equipment-Drippers and drip pipe -Features and test methods
TS ISO 9261 / T1 (Number modification, TS EN ISO 9261) Agricultural irrigation equipment-Drippers and drip pipe
TS 9343 Branch shears
TS 9460 Beet stripping fork
TS 9461 Spring-loaded safety pins (used in agricultural machinery)
TS 9462 Locking pins (used in agricultural machinery)
TS ISO 9467 Forestry machines - Chainsaws and bush choppers - Exhaust system with fire hazard
TS ISO 9467 Forestry machines - Chainsaws and bush choppers - Exhaust system with fire hazard
ISO 9518 Forestry machines - Portable chainsaws - Kickback test
TS 9611 Mowers - Leaf-blade test methods
TS ISO 9644 Valves used in agricultural irrigation equipment-Pressure losses-Test method
TS 9658 Protective frames and cabins (for farm tractors)
TSE EC / 97 / 27: 2000 Council directive 70 dated July 156 and numbered 22 / 1997 / at which relate to the mass and dimensions of certain classes of trailers of motor vehicles and amended regulation 97 / 27 / at
TS 9731 Tree climbing tools - Wood step
TS 9788 Plow cutters
TS ISO 9898 Plant protection tools and machines
TS 9901 Mower-winged
TS 9902 Test methods for poultry sickles
TS 10129 Agricultural equipment-Balers-Bale wire
TS 10305 Farm equipment-Tractor rear loaders
TS 10306 Agricultural machinery - Seed and fertilizer pipes
TS 10306 Agricultural machinery - Seed and fertilizer pipes
TS ISO 10448 Tractors - hydraulic pressure for tools
TS EN ISO 10517 Hand-held power shears - Safety
TS ISO 10522 Valves - Direct acting pressure regulating valves used in agricultural irrigation equipment
TS 10657 Agricultural machinery-Tractor drawbar
TS ISO 10726 Portable chainsaw chain saw - Dimensions and mechanical durability
TS 10748 Agricultural machinery-Locking pipe pins
tst ISO 10884 Hand-held bush pruners and grass shears with internal combustion engine - Determination of sound power levels - Engineering method (degree 2)
TS 10989 Agricultural machinery-Top suspension pin
TS 10990 Agricultural machinery-Articulated shafts-Overload couplings
TS 11014 Agricultural machinery - Lower suspension pin
TS 11270 Agricultural machinery-Tactors-Tension chains
TS EN ISO 11545 Agricultural irrigation equipment - Sprayer or sprinkler nozzle circular and linear mobile irrigation machines - Determination of water distribution homogeneity
TS 11583 Agricultural machinery - Carrying case used with three-point hanger
TS 11622 Agricultural machinery-Seedling planting machine
TS EN 12324-1 Irrigation techniques - Roller systems - Part 1: Dimension series
TS EN 12324-2 Irrigation techniques - Roller systems - Part 2: Properties of polyethylene pipes used in roller systems
TS EN 12324-3 Irrigation techniques - Roller systems - Part 3: Presentation of technical specifications
TS EN 12325-1 Irrigation techniques - Circular and linear moving (central axis and lateral moving) systems - Part 1: Presentation of technical specifications
TS EN 12325-2 Irrigation techniques - Circular and linear moving (central axis and lateral moving) systems - Part 2: Minimum work efficiency and technical characteristics
TS EN 12325-3 Irrigation techniques - Circular and linear moving (central axis and laterally moving) systems - Part 3: Technical terms and classification
TS ISO 12368 Agricultural vehicles - Mechanical hook-up connections on towing vehicles - test methods and rules
TS EN 12484-2 Irrigation techniques - Automatic lawn irrigation systems - Part 2: Description and design of typical technical models
TS EN 12484-3 Irrigation techniques - Automatic lawn irrigation systems - Part 3: Automatic control and system management
TS EN 12484-5 Irrigation techniques - Automatic lawn irrigation systems - Part 5: Systems testing methods
TS EN 12525 + A2 Agricultural machinery - Front loaders - Safety
TS EN 13740-1 Agricultural machinery - Fertilizer spreaders even - Environmental protection - Part by chapter 1: Rules
TS EN 13740-2 Agricultural machinery - Even fertilizer spreaders - Environmental protection - Part by chapter 2: Test methods
TS EN 13742-2 Irrigation techniques - Set of rigid sprinkler systems - Part 2: Test methods
TS ISO 13860 Forestry machines - Feeders - Terms, descriptions and commercial features
TS ISO 13861 Forestry machines - Roundwood loaders with wheels - Terms, descriptions and commercial features
TS ISO 13862 Forestry machines - Tipping tools - Terms, descriptions and commercial features
TS EN 13997 Irrigation techniques - Connection and control components used in irrigation systems - Technical characteristics and testing
TS EN 14017 + A2 Agricultural and forestry equipment - Solid fertilizer spreaders - Safety
TS EN 14018 + A1 Agricultural and forestry equipment - Sowing and planting machines - Safety
TS ISO 14269-1 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 1: Terms and recipes
TS ISO 14269-2 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 2: Heating, ventilation and air conditioning test method and performance
TS ISO 14269-3 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 3: Determination of solar heating effect
TS ISO 14269-4 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 4: Air filter test method
TS ISO 14269-5 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 5: Pressure test system test method
TS EN 14910 + A1 Garden equipment - Pedestrian-operated internal combustion engine pruners - Safety
TS EN 14930 + A1 Agricultural and forestry machinery and garden equipment - Pedestrian-controlled and hand-held machines - Determination of accessibility to hot surfaces
TS ISO 15003 Agricultural engineering - Electrical and electronic equipment - Environmental testing
TS ISO 15003 Agricultural engineering - Electrical and electronic equipment - Environmental testing
TSE ISO / TS 15079 Motorized lawn, horticultural and horticultural equipment-Operator controls-Actuating forces, change of position, guide to position and operating methods
TS EN 15099-1 Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1: General considerations
TS EN 15695-1 Farm tractors and self-propelled sprayers - Protection of the operator against dangerous substances - Part 1: Cabin classification, rules and test procedures
TS EN 15695-2 Farm tractors and self-propelled sprayers - Protection of the operator against dangerous substances - Part 2: Filters, rules and test procedures
TS EN ISO 10748: 2011 Shoe-Test methods for zippers- Zipper locking strength
TS EN ISO 5674 Agricultural and forestry machinery - Tractors and machinery - Articulated shaft housing - Strength and wear tests and acceptance criteria
TS EN ISO 5674 / tst T1 Agricultural and forestry machinery - Tractors and machinery - Articulated drive shaft housing - Strength and wear tests and acceptance criteria
tst 201290540 Hazelnut patter machine
TS 12658 Authorized services - Agricultural equipment and machinery - Rules for transport and transportation equipment
TS EN 12965 + A2 Agricultural and forestry machinery - Tractors, tools and machines - PTO driven articulated shafts and guards - Safety
TSE K 239 Branch Shredders
TSE K 282 Ground Mill
TS ISO 15077 Agricultural and forestry machinery tractors and self-propelled machines-Operator controls-Actuating forces position change position and operation method.
TS EN 16590-1 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1: 2010 modified)
TS EN 16590-2 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 2: Concept display phase (ISO 25119-2: 2010 modified)
TS EN 16590-3 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3: 2010 modified)
TS EN 16590-4 Agricultural and forestry tractors and machinery - Safety-related parts of control systems - Part 4: Manufacturing, operation, modification and support processes (ISO 25119-4: 2010 modified)
TS 12600 Authorized services - Livestock machinery - Rules
TS EN 15811 Agricultural machinery - Housings for moving live parts - Instrument opening
TS ISO 15077 Agricultural machinery - Tractors and self-propelled machines - Operator controls - Actuating forces, position change, position and operating method
TS ISO 11783-2 Agricultural and forestry machinery and tractors - Serial control and communication of the data network - Part 2: Physical layer
TS ISO 11783-2 / Tech.Cor.1 Agricultural and forestry machinery and tractors - Serial control and communication of data network - Part 2: Physical layer
TS ISO 11783-2 / Cor 1 Agricultural and forestry machinery and tractors - Serial control and communication of the data network - Part 2: Physical layer
TS ISO 12140 Agricultural machinery - Trailers and trailer trailers - Towing jacks
TS ISO 3767-2 Tractors, agricultural and forestry machinery-Motorized lawn mowers and garden equipment-Symbols for driver controls and other indications section 2-Symbols for agricultural tractors and machinery
TS ISO 3767-1 Tractors, agricultural and forestry machinery-Motorized lawnmower and horticultural equipment-Symbols for driver controls and other indications-Section 1: General symbols
tst 3862 Agricultural and forestry machinery - Tractors, tools and machines - Classification
TSE K 222 / T1 Forage harvester - Performance rules
TS EN ISO 16231-2 Self-propelled agricultural machinery -Stability assessment - Part 2: Determination of static stability and test procedures
TS EN ISO 16230-1 Agricultural machinery and tractors-Safety-High-voltage electrical and electronic components and systems- Part 1: General requirements
TS EN ISO 4254-1 Agricultural machinery-Safety - Part 1: General rules
TSE K 240 Agricultural Products Drying Machine
tst EN ISO 17989-1 Sustainability - tractors and machinery for agriculture and forestry Part 1: Principles
tst EN ISO 4254-1 Agricultural machinery-Safety - Part 1: General rules
TS EN ISO 4254-14 Agricultural Machinery-Safety- Bale Wrapping
TSE K 240 / T1 Agricultural Products Drying Machine
tst EN ISO 4254-14 Agricultural Machinery-Safety-Bale Wrapping
TSE K 222 Forage Harvester
The 2003 / 37 / EC 74 / 150 / 26 / 2003 may Regulation 2003 / at.
TS 4384 Method of coding the suitability of suspended agricultural tools and machines to the tractor
TS 4976 Wooden elements - used in agricultural tools and machines
TS ISO 5131 Acoustics -Tractors and machines used in agriculture and forestry -Measuring the noise in the operator position-Observation method
tkt 200977302Vacuum (suction) Sieve System HazelnutTop Vacuum Suction System
TS EN ISO 5674 Agricultural and forestry machinery - Tractors and machinery - Articulated drive shaft housing - Strength and wear tests and acceptance criteria
TS 5776 Lighting, lighting and signaling rules for agricultural machinery
TSE EEC / 77 / 311: 2001 Council regulation Council regulation 29 / 1977 / at dated 77 / March 311 on the approximation of the laws of the Member States relating to the level of noise perceived by the driver of motorized wheeled agricultural or forestry tractors
TSE EEC / 77 / 536: Regulation 2001 / 87 / at and 354 / 89 / at and 680 / 1999 / at and 55 / 28 / at and 1977 / 77 / at Council regulation 536 date and XNUMX / XNUMX / at
TS 9461 Spring-loaded safety pins (used in agricultural machinery)
TS 9462 Locking pins (used in agricultural machinery)
TS 10748 Agricultural machinery-Locking pipe pins
TS 10989 Agricultural machinery-Top suspension pin
TS 10990 Agricultural machinery-Articulated shafts-Overload couplings
TS 11014 Agricultural machinery - Lower suspension pin
TS ISO 11684 Safety signs and illustrations of hazards for agricultural and forestry machines, tractors, mowers and garden equipment - General rules
TS EN 12965 + A2 Agricultural and forestry machinery - Tractors, tools and machines - PTO driven articulated shafts and guards - Safety
TS ISO 14269-1 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 1: Terms and recipes
TS ISO 14269-2 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 2: Heating, ventilation and air conditioning test method and performance
TS ISO 14269-3 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 3: Determination of solar heating effect
TS ISO 14269-4 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 4: Air filter test method
TS ISO 14269-5 Agricultural and forestry machinery - Tractors and self-propelled machines - Operator cabin environment - Part 5: Pressure test system test method
TS EN 14930 + A1 Agricultural and forestry machinery and garden equipment - Pedestrian-controlled and hand-held machines - Determination of accessibility to hot surfaces
TS ISO 15003 Agricultural engineering - Electrical and electronic equipment - Environmental testing