Sociology, Services, Company Organization and Management, Administration, Transport Standards

Using national and international methods, we provide reliable, timely, independent, impartial testing and auditing services to customers within the framework of legal legislation. We provide testing, auditing and certification services to all of the following standards.

TS EN 12522-1 Furniture transport - Transport for real persons - Part 1: Service features

TS EN 12522-2 Transport of furniture - Transport of persons for natural persons - Part 2: Service requirement

TS ISO 2859-4 Sampling methods for inspection and testing - by qualitative specifications - Section 4: Procedures for assessing declared quality levels

TS EN ISO IEC 17000 Conformity assessment - Terms, definitions and general principles

TS EN ISO / IEC 17040 Conformity assessment - General requirements for peer review of conformity assessment bodies and accreditation bodies

TS EN ISO / IEC 17050-2Compliance assessment - Supplier declaration of conformity - part 2: Supporting documentation

TS EN 9133 Aviation series - Quality management systems - Qualification for aerospace parts

TS EN 12973 Value management

TS ISO 8423 Consecutive sampling plans for inspection and testing - according to the measurable characteristics for percentage nonconformity (known standard deviation)

TS EN 13809 Tourism services - Travel agencies and tour operators - Terminology

TS EN 14137 Postal services - Quality of service - Measurement of losses in contracted mail and other postal services using tracking and monitoring system.

TS EN ISO 15195Medical laboratories - Requirements for reference measurement laboratories

TS EN ISO 18513Tourism services - Hotels and other types of tourism accommodation - Terminology

TS EN ISO 18513 Tourism services - Hotels and other types of tourism accommodation - Terminology

TS EN ISO / IEC 17011 Conformity assessment - general requirements for accrediting bodies accrediting bodies conducting conformity assessment

TS EN 60300-1 Reliability management - Part 1: Reliability systems

TS ISO 10019 Selection of quality management system consultants and guidance for the services they will provide

TS EN 12507 Transport services - Guidance on the implementation of the TS EN ISO 9001: 2000 standard for the road transport, storage, distribution and railway products sector

TS 12725 Business - General rules for exhibition services and exhibition grounds

TS EN 14943 Transport services - Logistics - Glossary

TS EN 15140 Public transport - Basic requirements and recommendations for systems for measuring the quality of service provided

TS EN 14615 Postal services - Digital mail signs - Applications, security and design

TS EN 14804 Service providers for language learning - Requirements

TS EN 14873-1Commercial transport activities - Furniture storage and personal interactions - Part 1: Features related to storage facilities and related storage conditions.

TS EN 14873-2 Furniture transport activities - Furniture storage and personal interactions - Part 2: Terms of service

TS EN 13809 Tourism services - Travel agencies and tour operators - Terminology

TS EN 13816 Transport - Logistics and services - Public transport - Definition, objective and measurement of service quality

TS EN ISO 10012Measurement management systems - Requirements for measuring processes and measuring devices

TS EN ISO / IEC 17040 General requirements for peer review of conformity assessment bodies and accreditation bodies

TS EN 9102 Aviation series - first inspection of quality systems

TS EN 50148 / T1 Electronic taximeters

TS ISO 11648-1 Sampling from bulk materials - Statistical considerations - Part 1: General principles

TS EN ISO / IEC 17050-2 Conformity assessment - Supplier declaration of conformity - Part 2: Supporting documentation

TS 9300 Business - Rules for advertising services

TS EN 61025 Error tree analysis (FTA)

TS EN 12798 Transport quality system - Road, train and domestic maritime transport - Quality system requirements for the complete safety of ISO 9002 in the transport of dangerous goods

TS EN 302571 V1.1.1 Intelligent transport systems; Radio communication equipment operating in the 5855 mhz to 5925 mhz frequency band; The Rtte directive is the most harmonized standard that meets the essential requirements of the substance 3.2

tst 9575 ISO 4217 Codes for the display of currencies and funds

TS EN 14943 Communication services - Logistics - Glossary

TS EN 9100 Aviation series - Quality management systems - Requirements (according to ISO 9001: 2000) and quality systems - A model for quality assurance in design, development, production, installation and service (according to ISO 9001: 1994)

TS ISO 2859-10Sampling methods for inspection and testing - By qualitative specifications - Part 10: Introduction to ISO 2859 series standards for inspection by qualitative specifications

TSE ISO / TR 8550-1 Sampling methods for inspection and testing - General guide for the selection and use of sampling systems for acceptance in the inspection of different units in lots - Part 1: Sampling for acceptance

TSE ISO / TR 8550-2 Sampling methods for inspection and testing - General guide for the selection and use of sampling systems for acceptance in inspection of different units in lots - Part 2: Sampling according to qualitative specifications

TSE ISO / TR 8550-3 Sampling methods for inspection and testing - General guide for the selection and use of sampling systems for acceptance in the inspection of different units in lots - Part 3: Sampling according to measurable characteristics

TS EN ISO / IEC 17050-1 Conformity assessment - Supplier declaration of conformity - Part 1: General requirements

TS EN 12522-2 Moving goods transport services - to private persons - Part 2: Terms of service

TS EN 14892 Transport services - City logistics - Guide to the definition of controlled access to city centers

TS EN 12798 Transport quality management system - Road, rail and domestic maritime transport - Quality management system requirements to complete ISO 9001 for safety in the transport of dangerous goods

TS EN 62508 Guidance on humanitarian aspects

TS EN 15140 Public transport - Basic advice and requirements for systems measuring service quality

TS 13509 Landscaping - Terms and recipes

TS EN 14434 Whiteboards for educational institutions - Ergonomic, technical and safety requirements and related test methods

TS ISO 2859-5 Sampling methods for inspection and testing - According to qualitative specifications - Part 5: System of sequential sampling plans indexed by acceptance quality limit (aql) for batch batch inspection

TS EN 15602 Private security service providers - Terminology

TS EN ISO / IEC 19796-1 Education, training and training - Quality management, assurance and criteria - Part 1: General approach

TS EN 12522-1 Moving goods transport services - Private persons - part 1: Service features

TS EN 12952-4: 2011 Water pipe boilers and auxiliary installations - Part 4: Service life calculations of the boiler

TS EN 15707 Print media research - Terms and rules of service

TS 12630 Local Radio Stations - General rules

TS EN ISO / IEC 17025 General requirements for the competence of test and calibration laboratories

TS 11688 Businesses - Pickle production plants - General rules

TS 12076 Business - Rules for tea factories

TS ISO 11648-1 Sampling from bulk materials - Statistical considerations - Part 1: General principles

TS EN ISO 19011 Management systems audit guide (ISO 19011: 2011)

TS EN 15221-7: 2012 (EN) Facility management-Part 7: Guide for performance comparison

TSE CEN ISO / TS 22475-3 Geotechnical research and testing - Sampling methods and groundwater measurements - Part 3: Third party conformity assessment of organizations and persons

TS EN 9104-002 Aviation series - Quality management systems - Part 002: Supervision rules for aviation quality management system certification / approval programs

TS EN ISO / IEC 17020 Conformity assessment - Requirements for the operation of various types of inspection bodies

TS EN ISO / IEC 17024 Conformity assessment - General requirements for organizations with personnel certification

TS EN ISO / IEC 17065 Conformity assessment - Requirements for organizations performing product, process and service certification

TSE CEN / TS 15844-5: 2010Post services - ID mail tracking of mail units - Section 5: 4 for short letters - Official coding feature

TSE CEN / TS 15844-4: 2010Post services-Letter mail units id-Tracking- Part 4: Official coding feature for floors

TS EN ISO / IEC 17020 General criteria for the operation of various types of inspection bodies

TS EN ISO 17262Intelligent transport systems -Automatic vehicle and equipment identification - Counting and data structures

TS EN 16352 Logistics - Rules for reporting crime cases

TS EN ISO 17263Intelligent Transport Systems - automatic vehicle and equipment recognition - system parameters

TS EN ISO 9004 Quality management systems - Guide to performance improvements

TS ISO 2859-2 Sample methods for inspection and testing - by qualitative specifications - Section 2: Sampling plans indexed by quality limit (lq) in separated lot inspection

TS EN 62381 Automation systems in process industry - Factory acceptance test (fat), place acceptance test (sat), and place of use integration test (sıt)

TS EN ISO 14906 / AC Electronic toll collection - for special short-range communication Application interface description

TS EN 9115 Quality Management Systems - Requirements for aerospace and defense organizations - Deliverable software (additional to EN 9100)

TS EN 16310 Engineering services - Terminology for buildings, infrastructure and industrial services

TS EN 9100 Aviation series - Quality management systems - Requirements (according to ISO 9001: 2000) and quality systems - A model for design, development, production, installation and service

TS EN ISO 12052 Health informatics - Digital imaging and communication, including workflow and data management in pharmaceuticals (dıcom)

TS ISO / IEC 20000-2 Information technology - Service management Section 2: Guidelines for the implementation of service management systems

TS EN 31010 Risk Management - Risk assessment techniques (IEC / ISO 31010: 2009)

TS EN ISO 22313: 2014 Social Security - Business continuity management systems - Guidance

TS EN ISO 13408-2 Recommendation Health care products produced under aseptic conditions - Part 2: Draining

TS EN ISO 13408-3 Recommendation health care products produced under aseptic conditions part 3 lyophilization

TS EN ISO 13408-6: 2011 Recommendation 6-insulator systems for health care products manufactured under aseptic conditions

TS EN 14482 Postal services - Cassette for international letter - Test methods and performance requirements

TSE ISO / TS 29001 Petroleum, petrochemical and natural gas industries - Industry-specific quality management systems - Requirements for organizations providing products and services

TS EN 16271 Value management - Functionality of the required expression and functionality of the performance feature - Requirements for validation and expression of the need to provide a product and fulfill the purchasing process

TS EN 13724 Postal Services-Openings of special letter boxes and letter plates- Properties and test methods

TS EN 62508 Guidance on humanitarian aspects

TS EN ISO 24534-4 Automatic vehicle and device identification - Electronic record detection for vehicles - Part 4: Secure communication using asymmetrical techniques

TS 13573 Business - Consulting services - Classification - General and special rules

TS EN 13231-3 Railway applications - Railway - Job acceptance - Part 3: Acceptance of re-profiling of rails on railway

TS EN ISO 10012 Measurement management systems - Requirements for measuring processes and equipment

TS EN ISO / IEC 17050-1 Conformity assessment - Supplier declaration of conformity - Part 1: General requirements

TS ISO / IEC 20000-2 Information technology - Service management Section 2: Guidelines for the implementation of service management systems

TS ISO / IEC 20000-3 Information technology - Service management - Part 3: guidance on the scope definition and applicability of the ISO / IEC 20000-1 standard

TS ISO 39001: 2012 Road Traffic Safety (YTG) Management Systems - User guide and requirements 18.12.2013 03.220.20

TSE ISO / PAS 28007 TSE ISO / PAS 28007 - Ship and marine technology - Guide for private maritime safety companies (PMSC) providing ship contracted (and pre-contracted) armed security personnel (PCASP)

Protection profiles for TS EN 419211-2 Secure Signature generation tool - Part 2: Key Generation Tool

TS ISO 17442 Financial services - Legal personality determinants (LEI)

TS EN 15733 Real estate consultancy services - Features for the provision of real estate consultancy services

TS EN 13306 Care - Terms and recipes 12.06.2013 03.080.10

TS 13656 Social responsibility management systems - Terms 02.04.2015 03.100.01

TS ISO 29990 Learning services for non-formal education and training - basic requirements for service providers

TS EN 62508 Guidance on humanitarian aspects

TS EN ISO 24534-4 Automatic vehicle and device identification - Electronic record detection for vehicles - Part 4: Secure communication using asymmetrical techniques

TS EN 13231-3 Railway applications - Railway - Job acceptance - Part 3: Acceptance of re-profiling of rails on railway

TS EN ISO 10012 Measurement management systems - Requirements for measuring processes and equipment

TS EN ISO / IEC 17050-1 Conformity assessment - Supplier declaration of conformity - Part 1: General requirements

TS ISO / IEC 20000-2 Information technology - Service management Section 2: Guidelines for the implementation of service management systems

TS ISO / IEC 20000-3 Information technology - Service management - Part 3: guidance on the scope definition and applicability of the ISO / IEC 20000-1 standard

TS ISO 39001: Road Traffic Safety (YTG) Management Systems - User guide and requirements

TS EN 419211-2Security profiles for the secure signature generation vehicle - Part 2: Key Generation Vehicle

TS ISO 17442 Financial services - Legal personality determinants (LEI)

TS 13229 Authorized services - Rules for video and / or internal communication systems

TS EN 15733 Real estate consultancy services - Features for the provision of real estate consultancy services

TS EN 13306 Care - Terms and recipes

TS ISO 29990 Learning services for non-formal education and training - basic requirements for service providers

TS EN 62508 Guidance on humanitarian aspects

TS EN ISO 24534-4 Automatic vehicle and device identification - Electronic record detection for vehicles - Part 4: Secure communication using asymmetrical techniques

TS EN 13231-3 Railway applications - Railway - Job acceptance - Part 3: Acceptance of re-profiling of rails on railway

TS EN ISO 10012 Measurement management systems - Requirements for measuring processes and equipment

TS EN ISO / IEC 17050-1 Conformity assessment - Supplier declaration of conformity - Part 1: General requirements

TS ISO / IEC 20000-2 Information technology - Service management Section 2: Guidelines for the implementation of service management systems

TS ISO / IEC 20000-3 Information technology - Service management - Part 3: guidance on the scope definition and applicability of the ISO / IEC 20000-1 standard

TS ISO 39001: Road Traffic Safety (YTG) Management Systems - User guide and requirements

TSE ISO / PAS 28007TSE ISO / PAS 28007 - Ship and maritime technology - Guidance for private maritime security companies (PMSC) that provide ships with special contracted (and ready contracted) armed security personnel (PCASP)

TS EN 419211-2Security profiles for the secure signature generation vehicle - Part 2: Key Generation Vehicle

TS ISO 17442 Financial services - Legal personality determinants (LEI)

TS EN 15733 Real estate consultancy services - Features for the provision of real estate consultancy services

TS EN 13306 Care - Terms and recipes

TS ISO 29990 Learning services for non-formal education and training - basic requirements for service providers

TS ISO / IEC 20000-1 Information technology - Service management - Part 1: Features

TSE CEN / TS 15523 Postal services - Mailing notification

TS ISO 8422 Sampling section for inspection and testing 5: - consecutive sampling plans for qualitative examination

TS EN ISO 17262Intelligent transport systems -Automatic vehicle and equipment identification - Counting and data structures

TS EN 16352 Logistics - Rules for reporting crime cases

TS EN ISO 17263 Intelligent Transportation Systems - automatic vehicle and equipment recognition - system parameters

TS EN 419211-3 Protection profiles for secure electronic signature creation device - Part 3: Device with key import

TSE CEN / TR 16369 Use of control charts in concrete manufacturing

TS ISO 7870-3 Control charts - Part 3: Acceptance control charts

TS ISO 7870-4 Control charts - Part 4: Cumulative total charts

TS EN 9104-002 Aviation series - Quality management systems - Part 002: Aviation quality management system certification programs inspection requirements

tst EN 9101: 2011 Aviation series - Quality management systems - Evaluation

TS EN 62198 Project Risk Management

TS EN ISO 22301 Social security - Business continuity management systems - Requirements

TS EN ISO / IEC 17020 General criteria for the operation of various types of inspection bodies

S EN 16311 Engineering services - Definition of engineering services for industrial products

ISO EN / IEC 19788-2 Information technology - Learning, education and training - Resources for learning Metadata - Part 2: Dublin Core elements

TS EN 16311 Engineering services - Definition of engineering services for industrial products

ISO EN / IEC 19788-2 Information technology - Learning, education and training - Resources for learning Metadata - Part 2: Dublin Core elements

TSE CEN / TS 16326 Postal Services - Hybrid Mail - Functional features for mail registered electronic mail

TS EN 1325 Value management - Glossary - Terms and recipes

TS ISO 7870-2 Control charts - Part 2: Shewart control charts

TS EN ISO 22313: 2014 Social security - Business continuity management systems - Guide

TSE ISO / TS 29001 Petroleum, petrochemical and natural gas industries - Industry-specific quality management systems - Requirements for organizations providing products and services

TS EN 13724 Postal Services-Openings of special letter boxes and letter plates- Properties and test methods

TS EN 15628 Maintenance - Qualifications of maintenance personnel

TS EN 16489-1 Professional indoor ultraviolet exposure services - Part 1: requirements for training

TSE ISO / TS 22003 Food safety management systems - Requirements for organizations providing inspection and certification of food safety management systems

TS EN ISO / IEC 17050-1 Conformity assessment - Supplier declaration of conformity - Part 1: General requirements

TS EN ISO 9712Nondestructive testing - Qualification and certification of non-destructive testing personnel

TS EN ISO / IEC 17065 Conformity assessment - Requirements for organizations performing product, process and service certification

TS EN ISO / IEC 17024 Conformity assessment - General requirements for organizations certifying personnel

TSE ISO / TS 11774 Nondestructive testing - Performance-based qualification

TS EN 14906 Leather - Automotive leather - Test methods and test parameters

TSE ISO / IEC EN 20000-5 Information technology - Service management - Part 5: Sample implementation plan for the ISO / IEC 20000-1 standard

TSE CEN ISO / TS 17419 Intelligent transport systems - Joint systems - Management and classification of general ITS applications

TSE CEN ISO / TS 17423 Intelligent transport systems - Joint systems - ITS application requirements and selection of communication profiles (ISO / TS 17423: 2014)

TS EN 16194 Wastewater-free toilet cubicles - Characteristics of services and products related to the layout of the cubicles and sanitation products

TS EN 16372 Cosmetic surgery services

TS EN 62740 Main cause analysis (RCA) (IEC 62740: 2015)

TS ISO / IEC 20000-1 / D1 Information technology - Service management - Part 1: Service management system requirements

TSE CEN ISO / TS 17969 Petroleum, petrochemical and natural gas industries - Principles for the competence of the staff

TS EN 16736 Risk assessment of chemicals threatening health - Requirements for training

TS EN ISO 17575-1 Electronic Toll Collection - Application Interface Description for Autonomous Systems - Part 1: Charging

TS EN ISO 17575-2 Electronic Toll Collection - Application Interface Description for Autonomous Systems - Part 2: Connection and Communication to Low Tiers

TS EN ISO 17575-3 Electronic Toll Collection - Application Interface Description for Autonomous Systems - Part 3: Media Data

TS EN 15528 Railway applications - Line categories for managing the interaction between infrastructure and load limits of vehicles

TS EN 6550 Spare parts supply

TS EN 913 Aviation series - Quality management systems - Data Matrix for marking parts Quality Requirements

TS EN 9132 Aviation series - Quality management systems - Data Matrix for marking parts Quality Requirements

TS ISO 14813-1 Intelligent transport systems - Reference model structure (s) for the ITS sector - Part 1: ITS service area, service groups and services

TS ISO 14813-5 Intelligent transport systems - Reference model structure (s) for the ITS sector - Part 5: Requirements for description of structuring in ITS standards11.07.2016

TS ISO 14813-6 Intelligent transport systems - Reference model structure (s) for the ITS sector - Part 6: Data presentation with ASN.1

TS ISO 14817-1 Intelligent transport systems - ITS central data dictionaries - Part 1: Requirements for ITS data definitions

TS ISO 14817-2 Intelligent transport systems - ITS central data dictionaries - Part 2: Management of central ITS data concept records

TS ISO / TR 25102Intelligent transport systems - System structure - 'Use Scenario' possible template

TS ISO / TR 25100Intelligent transport systems - System structure - Consistency of ITS data concepts

TS ISO / TS 20452Physical storage format (PSF), an application program interface (API) and logical data configuration for PSF used in intelligent transport systems (ITS) database technology

TS ISO 15662 Intelligent transport systems - Wide area communication - Protocol management information

TS ISO / TR 21707Intelligent transport systems - Integrated transport information, management and control - Quality of data in ITS systems

TSE ISO / TR 24529 Intelligent transport systems - System architecture - Use of Unified Modeling Language (UML) and its output to ITS International Standards

TSE ISO / TR 26999 Intelligent transport systems - system architecture - Use of process-oriented methodologies and other outputs in ITS International Standards

TS EN ISO 24534-3 Intelligent transport systems - Automatic vehicle and device identification - Electronic record detection for vehicles (ERI) - Part 3: Vehicle data

TS ISO 24534-5 Intelligent transport systems - Automatic vehicle and device identification - Electronic record detection (ERI) for vehicles - Part 5: Secure communication using symmetrical techniques

TS ISO 24535 Intelligent transport systems - Automatic vehicle identification - Basic electronic record detection (Basic ERI)

TS ISO 21210 Intelligent transport systems - Terrestrial mobile communications access (CALM) - IPv6 networking

TS ISO 21212 Intelligent transport systems - Terrestrial mobile communication access (CALM) - 2G cellular systems

TS ISO 21213 Intelligent transport systems - Terrestrial mobile communication access (CALM) - 3G cellular systems

TS ISO 21217 Intelligent transport systems - Terrestrial mobile communication access (CALM) - Architecture

tst EN ISO 24802-2 Recreational diving services - Rules for training scuba instructors - Part 2: Level 2 - (ISO 24802-2: 2014)

TS ISO 17572-1 Intelligent transport systems (ITS) - location referencing for geographical databases - Part 1: general requirements and conceptual model

TS ISO 17572-2Intelligent transport systems (ITS) - location reference for geographical databases - Part 2: pre-coded position references (pre-coded profile)

TS ISO 17572-3 Intelligent transport systems (ITS) - location reference for geographical databases - Part 3: Dynamic location references (dynamic profile)

TS ISO 17679 Tourism and related services - Health spa - Service requirements

TS EN ISO 9001 / D1 Quality management systems - Requirements

TSN ISO / IEC TS 17021-2 Conformity assessment - Requirements for organizations providing audit and certification of management systems - Part 2: Qualification requirements for audit and certification of environmental management systems

TS EN ISO 9606-1 Welders qualification examination - Melting welding - Part 1: Steels

TS EN 13269 Maintenance - Guidelines for preparing maintenance contracts

TS ISO 24100 Intelligent transport systems - Basic principles for the protection of personal data in probe vehicle information services

TS ISO 24101-1 Intelligent transport systems - Communication access for land mobile phones (CALM) - Application management - Part 1: General requirements

TS ISO 24101-2Smart access systems - Communication access for land mobile phones (CALM) - Part 2: Conformity test

TS ISO 24102-1 Intelligent transport systems - Communication access for land mobile phones (CALM) - ITS station management - Part 1: Local government

TS ISO 24102-2Intelligent transport systems - Communication access for land mobile phones (CALM) - ITS station management - Part 2: Remote management of ITS-SCUs

TS ISO 24102-3 Intelligent transport systems - Communication access for land mobile phones (CALM) - ITS station management - Part 3: Service access points

tst EN ISO 9000Quality management systems - Basic principles, terms and descriptions

TS EN 16872 Homeopathy qualified doctors (MDQH) - Homeopathy qualified doctors

TS EN 61078 Block diagram reliability

TS EN 61703 Mathematical expression of reliability, availability, maintainability and maintenance support

TS ISO 18878 Upgradeable mobile work platforms - Operator training

TS ISO / IEC 17021-2 Conformity assessment - Requirements for organizations providing audit and certification of management systems - Part 2: Qualification requirements for audit and certification of environmental management systems

TS ISO 17034 General requirements for qualification of reference material manufacturers

17021-7 Conformity assessment - Requirements for organizations providing inspection and certification of management systems Section 7: Qualification requirements for inspection and certification of road traffic safety management systems

TS ISO / IEC TS 17021-5 Conformity assessment - Requirements for organizations providing audit and certification of management systems - Part 5: Qualification requirements for audit and certification of asset management systems

TS EN ISO / IEC 17021-1 Conformity assessment - Requirements for organizations providing audit and certification of management systems Section 1: Requirements

TS ISO 10002 Quality management - Customer satisfaction - Guidance on handling complaints in organizations

TS ISO / IEC TS 17021-4 Conformity assessment - Requirements for organizations providing audit and certification of management systems - Part 4: Qualification requirements for audit and certification of incident sustainability management systems

TS ISO / TR 10017: 2003 Statistical techniques guide for ISO 9001: 2000

TS ISO 3951-1 Sampling procedures for inspection according to measurable characteristics - Part 1: Rules for single sampling schedules sorted by AQL for batch quality inspection for single quality characteristic and single acceptance quality limit (AQL) 27.08.2015 03.120.30

TSE CEN ISO / TS 17425 Intelligent transport systems - Systems that work together - Description of data exchange for in-vehicle presentation of external road and traffic information

TS EN 61882 Hazard and workability studies (HAZOP studies) - Application guide

TSE CEN ISO / TS 17444-1 Electronic toll collection - Compensation performance - Part 1: Metrics

TSE CEN ISO / TS 17426 Intelligent transport systems - Interoperable systems - Contextual speeds

TSE CEN ISO / TS 16410-2 Electronic toll collection - Evaluation of equipment according to ISO / TS 17575-3 standard - Part 2: Abstract testing environment

TSE CEN ISO / TS 16410-1 Electronic toll collection - Evaluation of equipment according to ISO / TS 17575-3 standard - Part 1: Test environment structure and test objectives

TSE CEN ISO / TS 16407-2Electronic charge collection - Evaluation of equipment according to ISO / TS 17575-1 standard - Part 2: Abstract test environment

TSE CEN ISO / TS 16407-1Electronic charge collection - Evaluation of equipment according to ISO / TS 17575-1 standard - Part 1: Test environment structure and test objectives

TSE CEN ISO / TS 16401-2Electronic charge collection - Evaluation of equipment according to ISO / TS 17575-2 standard - Part 2: Abstract test environment

TSE CEN ISO / TS 16401-1Electronic charge collection - Evaluation of equipment according to ISO / TS 17575-2 standard - Part 1: Test environment structure and test objectives

TSE CEN ISO / TS 13143-2Electronic toll collection - Assessment of built-in and roadside equipment according to ISO / TS 12813 standard - Part 2: Abstract test environment

TSE CEN ISO / TS 13143-1Electronic toll collection - Assessment of built-in and roadside equipment according to ISO / TS 12813 standard - Part 1: Test environment structure and test objectives

TSE CEN ISO / TS 13140-1Electronic toll collection - Assessment of built-in and roadside equipment according to ISO / TS 13141 standard - Part 1: Test environment structure and test objectives

TSE CEN ISO / TS 13140-2Electronic toll collection - Assessment of built-in and roadside equipment according to ISO / TS 13141 standard - Part 2: Abstract test environment

TSE CEN ISO / EN 24014-3Color Transport - Interoperable charge management system - Part 3: Concepts complementing part 1 for multi-application environments

TSE CEN ISO / TR 17424Intelligent transport systems - Interoperable systems - Most advanced Local Dynamic Map concepts

TS ISO 18878 Upgradeable mobile work platforms -Operator (driver) training

TS ENV 13998 Road transport and traffic telematics - Public transport - Dynamic passenger information on non-interactive road

TS ISO 2859-1 / Cor.1 Sampling methods for inspection and testing - According to qualitative specifications - Part 1: Sampling programs indexed according to acceptance quality limit (aql) for batch batch inspection

TS ISO 13528 Statistical methods used in proficiency testing with interlaboratory comparison

TS EN ISO 24014-1 Public Transport - Interoperable fare management system - Part 1: Architecture

TS EN ISO 12813Electronic Toll Collection - Conformity Check Communication for Autonomous Systems

TS EN ISO 13141Electronic Toll Collection - Localization Increase Communication for Autonomous Systems

TS EN ISO 12855 Electronic Fee Collection - Exchange of Information Between Service Delivery and Fee Collection

TS EN 16763 Services for fire safety systems and security systems

TS EN ISO 13485 / AC Medical devices - Quality management systems - Requirements for regulatory purposes

TS EN 15224 Quality management systems - EN ISO 9001 for health care: 2015

TS EN ISO / IEC 17021-1 / D1 Conformity assessment - Requirements for organizations providing audit and certification of management systems - Part 1: Requirements

tst ISO 7870-4 Control charts - Part 4: Cumulative total charts

TS EN 16247-1 Energy audits - Part 1: General rules

TS EN 16247-2 Energy audits - Part 2: Buildings

TS ISO 39001 Road traffic safety (YTG) management system - User manual and requirements

TS EN 1325 Value management - Glossary - Terms and definitionsTS EN ISO 22870 Bedside testers (POCT) - Requirements for quality and competence

TS ISO 10962 Securities and related financial instruments - Classification of Financial Instruments (CFI code)

TS EN 13724 / AC Postal Services-Openings of special letter boxes and letter plates- Properties and test methods

TS EN 14508 Postal services - Quality of service - Measurement of the time it takes to send one piece of non-priority mail and second class mail from the sender to the recipient

tst EN ISO 13485 Medical devices - Quality management systems - Requirements for regulatory purposes

TS ISO 2859-1 Amd.1 Sampling methods for testing and testing - According to qualitative specifications - Part 1: Sampling programs indexed to acceptance quality party (aql) for batch batch inspection

TSE ISO / TS 17574 Electronic toll collection - Guide for safety protection profiles

TSN ISO / IEC TS 17021-6 Conformity assessment - Requirements for organizations providing audit and certification of management systems - Part 6: Qualification requirements for audit and certification of business continuity management systems

TS EN 16747 Marine and port security services

TS ISO 18774 Security and related financial instruments - Financial instrument Short name (FAKI)

TS EN 16646 Maintenance - Maintenance within physical asset management

TS EN ISO 11121Entertainment dive services - Rules for programs for introductory scuba diving

TS EN ISO 24803Diving services for leisure - rules for recreational diving providers

TS ISO 21218 Intelligent transport systems - Terrestrial mobile communications access (CALM) - Access technology support

TS ISO 21218 / Amd 1 Intelligent transport systems - Terrestrial mobile communications access (CALM) - Access technology support - Modified 1

TS EN 14534 Postal services - Quality of service - End-to-end service transit time measurement for bulk mail

TSE ISO / TS 24533 Intelligent transport systems - Electronic information exchange to facilitate transport and versatile transfer - Road transport information exchange methodology

TS EN 16489-1 Professional indoor ultraviolet exposure services - Part 1: requirements for training

TS ISO 55000 Asset management - Overview, principles and terminology

TS EN ISO / IEC 17067 Conformity assessment - Guidelines for product certification guidelines and product certification programs

TS ISO 22004 Food safety management systems - ISO 22000 application guide

TS EN ISO 18490The measurement of visual acuity of NDT personnel

TS EN 15628 Maintenance - Qualifications of maintenance personnel

TS ISO / IEC 27011 Information technology - Security techniques - Application principles for information security audits based on ISO / IEC 27002 for telecommunications organizations

TSE ISO / TS 9002 ISO 9001: Guidelines for the implementation of 2015 - Quality management systems

TS EN 16992 Customs Representatives Qualification

TS EN 14534 / AC Postal services - Quality of service - Measurement of end-to-end service transit time for bulk mail

TS ISO 19600 Conformity management systems - Guide

TSE ISO / IEC GUIDE 14: Product information for consumers

ISO / IEC GUIDE 15: ISO / IEC code of the principles relating to references to 1999 Standards

TSE ISO Guide 27 Guide for corrective actions to be taken by the certification body in case of misuse of the conformity mark

TSE ISO / IEC GUIDE 37: Instructions for use of consumer products

TSE ISO / IEC Guide 43-1 Proficiency testing through cross-laboratory comparisons section 1: Developing and operating proficiency testing arrangements

ISO Guide 43-2 Proficiency testing with interlaboratory comparison - Part 2: Selection and use of qualification programs by laboratory accreditation bodies

TSE ISO / IEC GUIDE 46: 1999 Comparative testing of consumer goods and related services - General principles

TSE ISO / IEC GUIDE 53 Conformity assessment - Guidelines for using an organization's quality management system for product certification

TSE ISO IEC GUIDE 68 Regulations for the recognition and acceptance of conformity assessment results

TSE ISO Guide 73 Risk management - Terms and definitions

TS EN 15964: 2011 Alcohol testers with single breathable breath - Features and test methods

TS ISO 3534-2 Statistics -Terms and symbols-Section 2: Applied statistics

TS ISO 3534-1 Statistics - Terms, definitions and symbols - chapter 1: Probability and general statistical terms

TS EN 2000 Aviation series - Quality assurance - Aviation products - Certification of the manufacturer's quality system

TS 2609 EN ISO 2922 Acoustics - Measurement of airborne sound transmitted by ships in inland waterways and ports

st 2756-0 ISO 2859-0 Sampling methods for inspection and testing - by qualitative specifications - Part 0: Introduction to sampling system

tst 2756-4 ISO 3951 Sampling methods for inspection and testing section: Sampling procedures and diagrams for examination of measurable properties for 4 percentage mismatch

TS ISO 2859-3 Sampling methods for inspection and testing - According to qualitative specifications - Part 3: Hopping batch sampling

TS ISO 3951-3 Sampling procedures for inspection according to measurable characteristics - Part 3: Binary sampling programs indexed by acceptance quality limit (aql) for batch batch inspection

TS 5822-2 ISO 5725-2 Accuracy of measurement methods and results (accuracy and accuracy) section 2: Basic method for determining the reproducibility and accuracy of a standard measuring method

TS 5822-3 ISO 5725-3 Accuracy of measuring methods and results (reality and accuracy) - Part 3: Intermediate measurements of the accuracy of a standard measuring method

TS ISO 5479 Statistical interpretation of data - Tests for determining deviation from normal distribution

TS ISO 7341 Banking - Reconciliation of Nostro (nezd) accounts

TS EN ISO 9004Quality management approach - management for the sustainable success of an organization

TS ISO 9019 Securities - Numbering of certificates

TS EN 9101: 2011 (EN) Aviation series - Quality management systems - Evaluation

TS EN 9111 Aviation series - Quality management systems - Assessment applied to maintenance organizations

TS EN 9121 Aviation series - Quality management systems - Evaluation applied to stocking dealers

TS ISO / IEC 9126 Information technology - Software product overview - Quality specifications and operating instructions

TS EN 9131 Aviation series - Quality management systems - Nonconformity documents

TS EN 9133 Aviation series - Quality management systems - Qualification process for standard parts used in aviation

TS ISO 9777 Confirmation jerseys for Banking and Exchange transactions

TS ISO 9778 Banking-Loan / deposit agreement confirmation forms

TS ISO 9926-1 Cranes-Training of operators-Section 1: General

TS ISO 10005 Quality management systems - Guidelines for quality plans

TS ISO 10006 Quality management systems - Guidance for quality management in projects

TS ISO 10007 Quality management - Guide to configuration management

TSE ISO / TR 10013 Guidelines for quality management system documentation

TS ISO 10014 Quality management - Guidance for achieving financial and economic benefits

TS ISO 10015 Quality management - Training guide

TS ISO 10019 Selection of quality management system consultants and guidance for the services they will provide

TS EN ISO 10360-6 Properties of geometric products (gmö) - Acceptance and re-validation tests for coordinate measuring machines (kom) - Part 6: Determination of errors in Gaussian type fit calculation

TS ISO 10725 Acceptance sampling plans and procedures for the inspection of bulk materials

TS ISO 11484 Steel products-Employer's qualification system for non-destructive testing personnel TS

TS ISO 11648-2 Sampling from bulk materials-Statistical considerations-Section 2: Sampling of granular materials

TS EN ISO 11354-1: 2011 Advanced automation technologies and applications -Features for setting up work in the operating process-Section 1: Framework for operating work

TS ISO 11843-2 Ability to detect measuring methods - Part 2: Methodology in the case of linear calibration

TS ISO 11843-3 Ability to detect measuring methods - Part 3: Methodology for determining the critical value of the response variable when no calibration data is used

TS ISO 11843-4 Capability of measuring methods - Part 4: Methodology for comparing the smallest detectable value to a given value

TS ISO 3951-5 Sampling procedures for inspection according to measurable characteristics - Part 5: Consecutive sampling plans indexed by acceptance quality limit (aql) for inspection according to measurable characteristics (known standard deviation)

TS EN 12408 Safety rules for overhead line facilities designed to carry people - Quality assurance

TSE ISO / TR 13352 Guidelines for the implementation of the TS EN ISO 9000 standard series in the iron ore industry

TS EN 13460 Maintenance documents

TS EN 13549 Cleaning services - Basic rules and recommendations for quality measurement systems

TS EN 13619 Postal services - Post processing - Characteristics for letter processing

TS EN 13816 Transport-Logistics and services-Public transport; Definition, objective and measurement of service quality

TS EN 14153-1 Recreational diving services - Minimum safety regulations for the training of recreational scuba divers - part 1: Level 1 - Supervised diving "

TS EN 14153-2 Recreational diving services - Minimum safety regulations for the training of recreational scuba divers - part 2: Level 2 - Independent diving "

TS EN 14153-3 Recreational diving services - Minimum safety requirements for the training of recreational scuba divers - part 3: Level 3 - Diving leader "

TS EN 14413-1 Recreational diving services - Minimum safety requirements for scuba instructors - Part 1: Level 1

TS EN 14413-2 Recreational diving services - Minimum safety requirements for scuba instructors - Part 2: Level 2

TS EN ISO 14814 Road transport and traffic telematics - Automatic vehicle and equipment recognition - Reference architecture and terminology

TS EN ISO 14815Roadway and traffic remote sensing systems - Automatic diagnosis of vehicles and equipment - System specification

TS EN ISO 14816Roadway and traffic remote sensing systems - Automatic identification of vehicles and equipment - Numbering and data structures

TS EN ISO 14819-6 Traffic and passenger information (tti) - tti messages via traffic message coding - Part 6: Encryption and conditional access for radio data systems - Traffic message channel alert c coding

TS EN 14873-1 Furniture transport - Storage of furniture and personal belongings for natural persons - Part 1: Characteristics of storage facilities and requirements for storage

TS EN 15221-2 Facility management - part 2: Guidelines for the preparation of facility management agreements

TS EN 15341 Maintenance - Key performance indicators for maintenance

TS EN 15221-1 Facility management - Part 1: Terms and definitions

TS EN 15565 Tourist guidance

TS EN 15696 Personal housing - Characteristics of personal housing services

TS EN 15838Consumer consulting centers - Rules for the implementation of the service

TS EN 15900 Energy efficiency services - Terms and rules

TSE ISO / TS 16949 Quality management systems - ISO 9001 for automotive manufacturing and related spare parts manufacturers: Special requirements for the implementation of 2008

TS EN ISO / IEC 17030 (Former No: TS ISO / IEC 17030) Conformity assessment - general requirements for third party conformity markings

TS ISO / IEC 17030 / T1 (Number modification, TS EN ISO / IEC 17030) Conformity assessment - General requirements for third party conformity markings

TS EN ISO 17264 Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces

TS EN ISO 18513Tourism services - Hotels and other types of tourism accommodation - Terminology

TS EN ISO 19019Operating vessels and maritime technology - Instructions for planning, carrying out and reporting on sea cruises "

TS EN ISO 19134 Geographic information-Location based services-Multi-mode routing and roaming

TS EN ISO 22000Food safety management systems - Requirements for all organizations in the food chain

tst EN ISO 22000 / tst AC Food safety management systems - Requirements for all organizations in the food chain

TS EN ISO 24534-2: 2010Automatic vehicle and device identification- Electronic record detection for vehicles (part) -Chapter 2: Operational features

TS EN ISO 24534-1: 2010Automatic vehicle and device identification- Electronic record detection for vehicles (part) -Chapter 1: Architect

TS EN ISO 24978 Intelligent transport systems - Security and emergency messages using any wireless media - Data logging03.220.01

TS ISO 26000 Guidelines for social responsibility

TS EN 29367-1 + AC Fastening and securing devices - For road transport (for ro / ro vessels) - General specifications - Part 1: Commercial vehicles and vehicle combinations, excluding semi-trailers

TS ISO 31000 Risk management - Principles and guidelines

TS EN 3101 Risk management - Risk assessment techniques

TS EN 60300-3-1 (Formerly: TS IEC 60300-3-1) Reliability management - Part 3-1: Application guide - Analysis techniques for reliability - Methodology guide

TS EN 60300-3-3Reliability management - Part 3-3: Application guide - life cycle cost

TS EN 60300-3-4Reliability management - Part 3-4: Application guide - Guide to determining reliability requirements

TS EN 60300-3-11 Reliability management - Part 3: Application guide-Part 11: Reliability-centered maintenance

TS EN 60300-3-14 Reliability management - Part 3-14: Application manual - Maintenance and maintenance support (ic 60300-3-14: 2004) / note: Notification note

TS EN 60300-3-16 Reliability management - Part 3-16: Application guide - Guide for the identification of maintenance support services

TS EN 60300-3-12: 2011 Reliability management-Section 3-12: Implementation guide-Integrated logistics support

TS EN 60300-3-15 Reliability management - Part 3-15: Application guide - Reliability system engineering

TS EN 60706-2 Serviceability of devices - Part 2: Feasibility rules for maintenance and inspections during design and development

TS EN 60706-3 Serviceability of devices - Part 3: Verification and collection of data, analysis and display

TS EN 60706-5 Serviceability of devices - Part 5: Testability and diagnostic test

TS EN 61014 Programs for safe growth

TS EN 61160 Design review

TS EN 61164 Reliability development - Statistical testing and estimation methods

Application of TS EN 61165 Markov techniques

TS EN 61649 Weibull analysis

TS EN 62267 Railway applications - Automatic urban guided transport (augt) - Safety requirements

TS EN 62290-1 Railway applications - Transport regulations and control systems for urban areas - Part 1: System principles and basic rules

TS EN 62429 Increasing reliability - tensile test for early detection of failures in specific complex systems

TS EN 100014 Key features - Cecc evaluated process average procedure (% 60 reliability limit)