We carry out your testing, inspection and certification processes as experienced and professional in pipe control. Our company tests, audits and certification of all the standards mentioned below.
TS EN 804 Plastic pipe systems-Connector fittings made of injection molding with connections made with solvent adhesives and used in pressure pipe systems-Determination of short-term hydrostatic internal pressure resistance
TS EN 803 Plastic pipe systems-Injection-molded thermoplastic fittings for elastic sealing rings used in pressure pipes - Determination of short-term internal pressure resistance without axial loads
TS EN 705 Plastic pipe systems-Glass fiber reinforced thermoset plastic (grp) pipes and fittings-Regression analysis methods and application
TS EN 1716 Plastic pipe systems - Polyethylene (pe) drill t - Determination of impact strength for mounted drill t
TS EN 1565-1 Plastic pipe systems - Disposal of waste water (hot and cold) - Styrene copolymer mixtures (yellow + pvc) - Part 1: Pipes, fittings and system features
TS ISO 9625 Fittings for mechanical connection - For pressure pipes made of polyethylene - Used for irrigation
TS EN 12061 Plastic pipe systems - Test method for determining the impact strength of thermoplastic fittings
TS ISO 4132 Adapters made of polyvinyl chloride (pvc-U) and metal with no plasticizer added - For pressure pipes - Laying lengths and thread sizes - Metric series
TS ISO 13966 Thermoplastic pipes and fittings - Rated ring stiffness
TS ISO 13924 Plastic pipes and fittings - Pe / metal transition fittings - Pe drill ts and pe branch saddles - Bending - Tensile cycle test
TS ISO 9634 Aerospace - Fluid systems - Dimensions of protective plastic caps and plugs
TS EN ISO 16871 Plastic pipes and duct systems - Plastic pipes and fittings - Direct exposure to natural climatic conditions
TS EN ISO 16871 Plastic pipes and ducting systems - Plastic pipes and fittings - Direct (natural) exposure to climatic conditions
TS EN ISO 1167-3 Thermoplastic pipes, fittings and fittings -Used for carrying liquids -Interesting resistance to internal pressure -Preparation of components
TS EN ISO 1167-4 Thermoplastic pipes, fittings and tools-Used for transporting liquids-Determination of resistance to internal pressure-Preparation of tools
tst ISO 12176-4 Plastic pipes and fittings -Equipment for polyethylene systems with crimping connection-Part 4: Conformity coding
TS EN ISO 1452-1 Plastic pipe systems - for drinking and potable water - Used in underground and surface pressure sewage systems - Polyvinyl chloride (PVC-U) without plasticizer - Part 1: General
TS EN ISO 15877-3: 2009 / A1 Plastic piping systems for hot and cold water systems Chlorinated poly (vinyl chloride pvc-C) - Part 3: Fittings
TS EN ISO 11296-4 Plastic piping systems for the renewal of underground pressure-free drainage and sewage lines - Part 4: Priming with on-site cured pipes
TS EN ISO 1452-5 Plastic pipe systems - Used for drinking and potable water, underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 5: suitability of the system
TSE K 167Plastic pipe systems - For drinking and potable water - Pipes joined by butt welding made of polyvinyl chloride (pvc-U) without plasticizer
TS EN 12201-3 + A1 Plastic pipe systems for potable and domestic water, sewage and drainage under pressure - Polyethylene (PE) - Part 3: Fittings
TS ISO 18553 Test method for evaluating the degree of pigment or carbon black dispersion in polyolefin pipes, pipe fittings and compounds
TS ISO 13956 Plastic pipes and fittings - Determination of adhesion strength - Tear test for polyethylene (pe) tools
TS EN 1555-3: 2010 + A1 Plastic pipe systems - Used for the transport of gas fuels - Polyethylene (pe) - Part 3: Fittings
TS ISO 11414 Plastic pipes and fittings-Polyethylene (pe) pipe / pipe or pipe / joint part test systems with butt welding
TS EN ISO 10147 Pipe and fittings made of cross-linked polyethylene (PE-X) - Determination of gel content and estimation of the degree of cross-linking
TS EN ISO 11296-7 Plastic piping systems for the repair of underground unpressurized discharge and sewer networks - Part 7: Coating with spiral wound pipes
TS EN ISO 11299-1 Pipe systems for the renewal of underground gas networks Plastic - Part 1: General
TS EN ISO 11299-3: 2013 Pipe systems for renewal of underground gas networks Plastic - Part 3: Liner with narrow-fit pipes
TS EN ISO 15874-3 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 3: Fittings
TS EN ISO 13260 Thermoplastic pipe systems for unpressurized underground drainage and waste water - Simultaneous temperature cycling and external load resistance test method
TS EN 877 / A1 Cast iron pipes and fittings - Used to drain water from buildings - Joints and accessories - Specifications, test methods and quality assurance
TS EN 877 / A1 / AC Cast iron pipes and fittings - Used to drain water from buildings - Joints and accessories - Specifications, test methods and quality assurance
TS 931 EN 10241 Pipe fittings - Steel, screwed 08.02.2005 23.040.40
TS EN 1123-1 Pipes and fittings - Welded, hot-dip galvanized - Socketed spigot steel pipes for waste water systems - Part 1: Specifications tests and quality control
TS EN 1123-3 Pipes and fittings - Stitched, hot-dip galvanized - Used in waste water systems - Socketed and spigot steel tubes - Part 3: Particular requirements for sizes and vacuum drainage systems and for drainage systems in shipbuilding.
TS EN 1124-3 Pipes and fittings - Welded, stainless steel - Used in sewage systems - Plugs with socket and spigot - Part 3: System x-Dimensions
TS EN 1254-1 Copper and copper alloys - Pipe fittings - Part 1: Hard or soft soldered fittings to copper pipes
TS EN 1254-2 Copper and copper alloys - Pipe and fittings - Part 2: Crimp end fittings used in copper pipes
TS EN 1254-3 Copper and copper alloys - Pipe fittings - part 3: Crimp fittings used in plastic pipes
TS EN 1254-4 Copper and copper alloys - Pipe fittings - Part 4: Fittings connecting capillary or crimp tips with other connections
TS EN 1254-5 Copper and copper alloys - Pipe fittings - Part 5: Short-end fittings for capillary brazing to copper pipes
TS ISO 2851 Stainless steel elbows and t-for food industry
TS ISO 4144 Piping - Threaded stainless steel fittings according to Iso 7-1
TS ISO 5251 Stainless steel butt welded fittings
TS EN ISO 8434-4 Metallic pipe connections for general use and flowability - Part 4: 0 tapered connections with 24-Ring welded to nipples
TS 9341 EN 10224 Non-alloy steel pipes and fittings for the transport of water and other aqueous fluids - Technical delivery conditions
TS EN 10242 / A1 / AC Pipe fittings - Cast iron tempered, threaded
TS EN 10253-1 Pipe fittings - Butt welded - Part 1: General purpose formable carbon steel without special inspection
TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.
TS EN 10253-4 / AC Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.
TS EN 10284 Malleable cast iron fittings for polyethylene (pe) pipe systems with compression ends
TS EN 10288 Steel pipes and fittings for onshore and offshore pipelines - Two-layer extruded polyethylene-based coatings
TS EN 969 ductile cast iron pipes, fittings, fittings and connections - For gas pipelines - Specification and test methods
TS EN 14628 Malleable iron pipes, fittings and accessories - External polyethylene coating for pipes in highly corrosive soils - Requirements and test methods
TS EN 14870-2 Oil and natural industries - Reducing brackets, fittings and flanges for pipeline distribution systems - Part 2: Fittings
TS EN 15655 Ductile iron pipes, fittings and accessories - Internal polyurethane liner for pipes and fittings - Features and test methods
TS EN 10253-2 Steel pipe fittings - Butt welded - Part 2: Special inspection requirements for non-alloy and ferritic alloy steels-Dimensions, technical delivery conditions