As one of the largest and most experienced organizations in certification with more full-time audit experts than any other certification body in the world, we provide certification services in all standards listed below.
TS 10572 Determination of peat-fiber ratio and botanical composition
TS 440 ISO 351 Solid mineral fuels - Total sulfur determination - High temperature combustion method
TS 665 ISO 622 Solid fossil fuels - Determination of phosphorus content - Reduced molybdophosphate photometric method
TS ISO 13909-5 Quarry and coke - Mechanical sampling - Section 5: Coke - Sampling from moving material
TS 3037 ISO 7936 Determination and demonstration of charcoal-swimming-immersion properties-General instructions for apparatus and processes
TS EN 1860-3 BBQ ignition lighters and barbecue charcoal briquettes -Features and test methods
TS EN 1860-2 Solid fuels and igniters for barbecues and barbecues - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Specifications and test methods
TS EN 15536 Coal pyrolysis products - Oil based coal tar - Washable oils - Specification and test methods
TS EN 15471 Liquefied petroleum gases (lpg) - Determination of dissolved residues - High temperature gravimetric method
TS EN 15471 Liquefied petroleum gases - Determination of dissolved residues - High temperature gravimetric method
tst EN 14961-1 Solid biofuels-Fuel properties and classes - Part 1: General specifications
TS EN 15400 Solid fuels - Recovered - Determination of heat value
TS EN 15403 Solid fuels - Recycled - Determination of ash content
TS EN 15408 Solid fuels - Determination of recovered sulfur (s), fluoride (f) and bromide br)
TS EN 15414-3 Solid fuels - Recyclable - Determination of moisture content by oven drying - Part 3: Moisture in general analysis sample
TS EN 15442 Solid fuels - Recycling - Methods for sampling
TS ISO 18283 Hard coal and coke - Manual sampling
TS EN 15590 Determination of the rate of aerobic microbial activity using solid fuels- Recycled-Real respiration index
TS EN 15413 Method for the preparation of test samples from solid fuels - recovered - laboratory samples
TS EN 15411 Solid fuels - Methods for determination of the content of recovered trace elements (as, ba, be, cd, co, cr, cu, hg, mo, mn, ni, pb, sb, se, tl, v and zn)
TS EN 15410 Solid fuels - Methods for the determination of the content of recovered-basic elements (al, ca, fe, k, mg, na, p, si, ti)
TS EN 15440: 2011 / AC Solid fuels - Methods for determination of recovered biomass content
TS ISO 18283 / Cor. 1 Hard coal and coke - Manual sampling
TS EN 16158 Animal feeds - Determination of semduramycin content - Liquid chromatography using a “tree” analytical approach
TS EN 15234-2 Kato biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
TS EN 15234-4 Kato biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
TS EN 15234-3 Kato biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
TS EN 15234-5 Kato biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
TS EN 15234-6 Kato biofuels - Fuel quality assurance - Part 6: Non-wood pellets for non-industrial use
tst EN 14588 Solid biofuels - Terms, descriptions and explanations
TS ISO 1928 Solid mineral fuels - Determination of gross thermal value by bomb calorimetry method and calculation of net thermal value
TS EN 14588 Solid biofuels - Terms, descriptions and descriptions
tst 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms
TS ISO 567 Coke - Determination of bulk density in a small container
tst 11676 Oil odor - used in industry
TS ISO 1171 Solid mineral fuels - Determination of ash content
TS EN 1860-1: 2013 Solid fuels and igniters for barbecues and barbecues - Part 1: Solid fuel barbecues - Specifications and test methods
TS EN 15234-1 Solid biofuels - Fuel quality assurance - Part 1: General specifications
TS EN 15357 Solid fuels recovery - Terminology, definitions and descriptions
TS EN ISO 17225-1 Solid biofuels - Fuel specifications and classes - Part 1: General specifications
TS EN ISO 17225-2 Solid biofuels - Fuel properties and classes - Part 2: Classified wood pellets
TS EN ISO 17225-3 Solid biofuels - Fuel specifications and classes - Part 3: Classified wood briquettes
TS EN ISO 17225-4 Solid biofuels - Fuel specifications and classes - Part 4: Classified wood chips
TS EN ISO 17225-5 Solid biofuels - Fuel specifications and classes - Part 5: Classified firewood
TS EN ISO 17225-6 Solid biofuels - Fuel properties and classes - Part 6: Non-wood pellets classified
TS EN ISO 17225-7 Solid biofuels - Fuel properties and classes - Part 7: Non-wood briquettes classified
TS EN ISO 16559 Solid biofuels - Terms, descriptions and explanations
TS 10572 Determination of peat-fiber ratio and botanical composition
TSE CEN / TR 15149-3 Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method
TS EN 15234-1 Solid biofuels - Fuel quality assurance - Part 1: General specifications
TS EN 15234-2 Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
TS EN 15234-3 Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
TS EN 15234-4 Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
TS EN 15234-5 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
TS EN 15234-6 Solid biofuels - Fuel quality assurance - Part 6: Non-wood pellets for non-industrial use
tst EN ISO 17225-1 Solid biofuels - Fuel specifications and classes - Part 1: General specifications
tst EN ISO 17225-2 Solid biofuels - Fuel properties and classes - Part 2: Classified wood pellets
tst EN ISO 17225-3 Solid biofuels - Fuel properties and classes - Part 3: Classified wood briquettes
tst EN ISO 17225-4 Solid biofuels - Fuel specifications and classes - Part 4: Classified wood chips
tst EN ISO 17225-5 Solid biofuels - Fuel properties and classes - Part 5: Classified firewood
tst EN ISO 17225-6 Solid biofuels - Fuel properties and classes - Part 6: Classified non-wood pellets
tst EN ISO 17225-7 Solid biofuels - Fuel properties and classes - Part 7: Non-wood briquettes classified
tst EN 15210-1 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 1: Pellets
tst EN 15210-2 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 2: Briquettes
tst EN 16126 Solid biofuels - Determination of particle size distribution of dispersed pellets
tst EN 16127 Solid biofuels - Determination of length and diameter of pellets
tst EN 14774-1 Solid biofuels - Determination of moisture content - Drying method in the oven - Part 1: Total moisture - Reference method
tst EN 14774-2 Solid biofuels - Determination of moisture content - Drying method in the oven - Part 2: Total moisture - Simple method
tst EN 14774-3 Solid biofuels-Determination of moisture content - Drying method in the oven - Part 3: Moisture in general analysis samples
tst EN 14775 Solid biofuels - Determination of ash content
tst EN 14778 Solid biofuels - Sampling
tst EN 14780 Solid biofuels - Sample preparation
tst EN 14918 Solid biofuels - Determination of thermal value
tst EN 15103 Solid biofuels - Determination of bulk density
tst EN 15104 Solid biofuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental methods
tst EN 15148 Solid biofuels - Determination of volatile content
TS EN ISO 16995 Solid biofuels - Determination of water-soluble chloride, sodium and potassium content
tst EN ISO 16995 Solid biofuels - Determination of water-soluble chloride, sodium and potassium content
TS ISO 687 Solid mineral fuels - Coke - Determination of humidity in general analysis test sample
TS EN ISO 16967 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
TS EN ISO 16948 Solid biofuels - Determination of total carbon, hydrogen and nitrogen content
TS EN ISO 16968 Solid biofuels - Determination of trace elements
TS EN ISO 18122 Solid biofuels - Determination of ash content
TS EN ISO 17831-2 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 1: Briquettes
TS EN ISO 17831-1 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 1: Pellets
tst EN 15290 Solid biofuels - Determination of main elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
tst EN 15296 Solid biofuels - Conversion of analytical results from one base to another
tst EN 15297 Solid biofuels - Determination of trace elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
TS EN ISO 17829 Solid biofuels - Determination of diameter and length of pellets
Solid biofuels - Determination of moisture content - Drying method in the oven - Part 18134: Total moisture - Reference method TS EN ISO 1-1
Solid biofuels - Determination of moisture content - Method of drying in the oven - Part 18134: Moisture in the general analysis sample TS EN ISO 3-3
TS EN ISO 18123 Solid biofuels - Determination of volatile matter content
TS EN ISO 17828 Solid biofuels - Determination of bulk density
TS ISO 334 Solid mineral fuels - Determination of total sulfur - Eschka method
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 17827: Vibrating sieving method using sieves with mm or smaller mesh
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 17827: Oscillating sieving method using mesh screens of mm and larger
TS EN ISO 17830 Solid biofuels - Determination of particle size distribution of shredded pellets
TS EN ISO 16994 Solid biofuels - Determination of total sulfur and chloride content
TS EN ISO 18846 Solid biofuels - Determination of fine grain content in pellets
TS EN ISO 18847 Solid biofuels - Determination of grain density of pellets and briquettes
TS ISO 579 Coal-Total moisture determination
tst EN 15289 Solid biofuels - Determination of total sulfur and chloride content
TS EN 15402: 2011 Solid fuels - Determination of recovered volatile matter content
TS EN 15407: 2011 Solid fuels - Recycled - Determination of carbon (c), hydrogen (h) and nitrogen (n) content
TS 644 ISO 587 Solid mineral fuels - Determination of chlorine using Eschka mixture
TS 646 ISO 625 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method
TS 651 ISO 601 Solid mineral fuels - Determination of arsenic content - Silver by using the diethyl methylarylbarbamate photometric method according to Ts 1463 (iso 2590)
TS 652 ISO 609 Solid fossil fuels - Determination of carbon and hydrogen - High temperature combustion method
TS 652 ISO 609 / T1 Solid fossil fuels - Determination of carbon and hydrogen - High temperature combustion method
TS 711 ISO 562 Coal and coke - Determination of volatile substances
TS ISO 1013 Coke - Determination of bulk density in a large container
TS 1044 ISO 925 Solid mineral fuels - Determination of carbon content in carbonate form - Gravimetric method
TS ISO 1171 + Tech Cor 1 Solid mineral fuels - Determination of ash content
TS 1372 ISO 1213-2 Solid mineral fuels - Terms and definitions - Part 2: Terms related to sampling testing and analysis
TS EN 15443: 2011 Solid fuels - Methods for the preparation of recovered-laboratory samples
TS ISO 728 Coke - Nominal top grit size greater than 20 mm - Grit size analysis by sieving
TS 1613 Coke - Determination of true relative density, apparent relative density and porosity
TS 1613 / T1 Coke - Determination of true relative density, apparent relative density and porosity
TS ISO 728 Coke - Nominal top grit size greater than 20 mm - Grit size analysis by sieving
TS 1613 Coke - Determination of true relative density, apparent relative density and porosity
TS 1613 / T1 Coke - Determination of true relative density, apparent relative density and porosity
TS EN 1860-2 Solid fuels and igniters used in barbecues and barbecues - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Specifications and test methods
TS EN 1860-3 Solid fuels and igniters used in barbecues and barbecues - Part 3: Ignitants for burning solid fuels used in barbecues - Specifications and test methods
TS EN 1860-4 Solid fuels and igniters for barbecues and barbecues - Part 4: Single-use barbecues with solid fuels - Specifications and test methods
TS ISO 1953 Hard coal - Grain size analysis - Screening method
TS 1987 Charcoal (charcoal)
TS 1999 ISO 1170 Coal and coke - Calculations based on different principles
TS ISO 2325 Coke - Grain size analysis (nominal top grain size 20 mm or less)
TS 3919 Test rules for the testing and acceptance of coke-screening plants
TS 4488 Blast furnace odor
tst 4488 Blast furnace odor
TS 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms
TS 5788 Used in lignite-heating
TS 5830 Activated carbon
TS 5831 Activated carbon (hard coal) - Determination of hardness
TS 5896 Determination of activated carbon-Ph
TS 5897 Granular activated carbon-Determination of ignition temperature
TS 6088 Evaluation of activated carbon in liquid medium
TS 6092 Charcoal-Chemical analysis
TS 6093 Activated carbon - Determination of apparent density
TS 6879 Activated coal - Total ash determination
TS 6880 Determination of activated charcoal-particle distribution
TS 8826 Oil odor-Ash determination-Gravimetric method
TS 9088 Oil odor - Determination of volatile matter - Gravimetric method
TS 9102 Peat - Classification
TS 9103 Peat- Determination of ash and organic matter
TS 9104 Peat-Ph determination
TS 9105 Peat- Determination of moisture content
TS 9106 Peat- Determination of electrical conductivity and salt content
TS 9164 Peat- Determination of degree of peat
Sampling for TS 9441 Peat-Laboratory experiments
TS ISO 9931 Coal - Sampling of powdered coal carried by gases in direct combustion coal systems
TS 10041 Peat - Determination of density, porosity, water capacity and air capacity
TS 10065 Oil compressed with odor-Calcined-Vibration device - Determination of compressed density
TS 10693 Oil odor - Calcined - Real density determination - Xylene displacement method
TS ISO 10752 Coal - Sizing equipment - Performance evaluation
TS 11017 Petroleum odor - Calcined - Determination of dusting agent
TS 11017 Petroleum odor - Calcined - Determination of dusting agent
TS 11250 Wastes-Definitions of terms-Related to fuels obtained from waste
TS 11554 Peat-Grain analysis
TS 11571 Activated charcoal-Powder
TS 11572 Activated coal - Powder - Test methods
TS 11676 Oil odor - used in industry
TSE ISO / TS 11725 Solid mineral fuels - Nitrogen determination - Semi-micro gasification method
TS ISO 13909-1 Coal and coke - Mechanical sampling - section 1: General introduction
TS ISO 13909-6 Hard coal and coke - Mechanical sampling - Part 6: Coke - Preparation of test samples
TS ISO 13909-7 Quarry and coke - Mechanical sampling - Section 7: Methods for sampling, sample preparation and testing
TS ISO 13909-8 Coal and coke - Mechanical sampling - section 8: Test methods for systematic error determination