We carry out your certification procedures by applying all the necessary methods with our expert staff in all processes specified in the Petroleum and Related Technologies standard.

TS 9722 Natural gas pipeline - Design and installation rules for tubular and bottled gas tanks 

TS 8091 Natural gas pipeline equipment - Maintenance rules

TS 9722 Natural gas pipeline - Design and installation rules for tubular and bottled gas tanks 

TS 8091 Natural gas pipeline equipment - Maintenance rules

TS 6355 Natural gas meters - Connection heads with one connection 

TS 9807 Natural gas pipeline - Pressure reducing and pressure limiting stations and devices - Capacity rules 

TS 1300 Calibration methods of vertical cylindrical tanks for storage of crude oil and petroleum products 

TS 1300 Calibration methods of vertical cylindrical tanks for storage of crude oil and petroleum products

TS 8415 Terms and definitions used in natural gas pipeline equipment 

TS 9886 Natural gas pipeline - General rules of switchgear building

TS 10942 EN 377 Lubricants - for gas fittings and control devices operating in a combustible gas environment (except those used in industrial processes) 

TS 6124 EN 27941 Analysis by commercial propane and butane-Gas chromatography 

TS 2834 EN 23015 Petroleum products - Determination of cloud point 

TS 2646 EN ISO 7536 Petroleum products - Determination of oxidation stability of gasoline - Induction period method 

TS 1013 EN ISO 3675 Determination of the density of crude oil and petroleum products in the laboratory-Hydrometer method

TS ISO 6743-6 Lubricating oils, industrial oils and related products - (class l) - Classification - Part 6: Group c (gear oils) 

TS ISO 6743-8 Lubricating oils, industrial oils and related products (class l) -Classification-Part 8: Group r (liquids providing temporary protection against corrosion) (industrial oils ö.dk)

TS ISO 6743-10 Lubricating oils, industrial oils and related products (class l) -Classification-Part 10: Group y (miscellaneous lubricants) 

TS ISO 6743-11 Lubricating oils, industrial oils and related products (class l) -Classification-Part 11: Group p (used in compressed air-operated devices) 

TS ISO 6743-12 Lubricating oils-Industrial oils and related products (class l) - Classification -Chapter 12: Group q- (heat transfer fluids)

TS ISO 6743-14 Lubricating oils-, industrial oils and related products (class l) -Classification section 14: Group u (used in heat treatment) 

TS 7472 EN 24260 Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method 

TS 7472 EN 24260 Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method 

TS EN ISO 6551 Petroleum-based liquids and gases-Accuracy and safety of dynamic measurement-Wired transmission of electrical and / or electronic pulse signal data

TS EN 3030 Aviation series - Dry film lubricants - Determination of solids content 

TS EN 3032 Aviation series - Lubricants applied as dry film - Measurement of film thickness 

TS 1451 EN ISO 3104 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity 

TS 1742 EN ISO 4267-2 Petroleum and liquid petroleum products- Calculation of quantity- Part 2: Dynamic measuring method 

TS 1742 EN ISO 4267-2 Petroleum and liquid petroleum products- Calculation of quantity- Part 2: Dynamic measuring method 

TS 6312 EN ISO 9029 Crude oil-Water determination-Distillation method 

TS EN ISO 12185 Crude oil and petroleum products-Density determination-Salina u-Tube method

TS 1233 ISO 3016 Petroleum products - Determination of pour point 

TS ISO 6617 Lubricating oils - Oil based - Aging properties - Determination of change in conradson carbon residue after oxidation

TS 440 ISO 351 Solid mineral fuels - Total sulfur determination - High temperature combustion method 

TS 665 ISO 622 Solid fossil fuels - Determination of phosphorus content - Reduced molybdophosphate photometric method

TS 1713 ISO 2049 Petroleum products - Color determination (astm scale) 

TS EN ISO 13443 (Formerly: TS ISO 13443) Natural gas - Standard reference conditions 

TS EN 12766-1 Petroleum products and used oils-Determination of PCBs and related products-Part 1: Separation and determination of certain pcb derivatives using an electron capture detector (ecd) gas chromatography (gc) 

TS EN 12766-1 Petroleum products and used oils-Determination of PCBs and related products-Part 1: Separation and determination of certain pcb derivatives using an electron capture detector (ecd) gas chromatography (gc)

TS 9464 EN 1761 Rubber hoses and hose assemblies - used for road tankers and fuel delivery 

TS EN 12697-28 Bituminous mixtures - Test methods for hot asphalt mixtures - Part 28: Preparation of samples for the determination of binder content, water content and grain size distribution 

TS EN 12766-2 Petroleum products and unused oils - Determination of Pcb and related products - Part 2: Calculation of polychlorinated biphenyl content 

TS EN 12766-2 Petroleum products and unused oils - Determination of Pcb and related products - Part 2: Calculation of polychlorinated biphenyl content 

TS EN ISO 13534 Oil and gas industry - Drilling and production equipment - Inspection, maintenance, repair and reconstruction of lifting equipment 

TS EN ISO 13535 Oil and gas industry- Drilling and production equipment- Lifting equipment

TS EN ISO 13628-3 Oil and gas industry - Design and operation of underwater production systems - Part 3: Flow line systems (TFL) 

TS EN ISO 13703 Oil and gas industry - Offshore production platforms - Design and installation of piping systems 

TS EN ISO 6974-3 Determination of the composition by natural gas-gas chromatography (within certain uncertainty limits) - Part 3: Determination of nitrogen carbon dioxide and carbon hydrocarbons up to 8 by two pack columns 

TS EN ISO 6974-4 Determination of the composition by natural gas-gas chromatography (within certain uncertainty limits) - Part 4: In the laboratory and pipeline using two columns of carbon dioxide of 1 to 5 and carbon of more than 6 and carbon of more than XNUMX determination in measuring system

TS EN 12606-2 Bitumen and bituminous binders - Determination of paraffin wax content - Part 2: Extraction method 

TS 1799 ISO 2137 Petroleum products - Lubricating greases and petroleum jelly - Determination of cone penetration depth 

TS 4917 ISO 2715 Liquid hydrocarbons - volume measurement with turbine meter systems 

TS 4043 ISO 5024 Petroleum liquids and liquefied petroleum gases - Measurement - standard reference conditions

TS 9087 ISO 8216-3 petroleum products - Fuels (class f) - Classification - Part 3: Type L (liquefied petroleum gases) 

tst 4943 Storage facilities for crude oil and petroleum products - Installation, operation and safety regulations

TS EN ISO 13533 Oil and gas industry-Drilling and production equipment-Internal drilling equipment 

TS EN 13645 Installation and equipment for liquefied natural gas - Design of on-site installation with a storage capacity between 5 t and 200 t 

TS EN 13723 Petroleum products-Determination of low lead content in gasoline-Wavelength-Dispersive x-ray fluorescence spectrometer

TS EN ISO 10440-2 Oil and gas industry-Rotary type positive displacement compressors-Part 2: Air compressors (oil-free) 

TS ISO 13909-5 Quarry and coke - Mechanical sampling - Section 5: Coke - Sampling from moving material 

tst 1446 Liquefied petroleum gases (lpg) - Storage rules

tst EN ISO 19900 Oil and gas industry - General specifications for offshore structures (iso 19900: 2004)  

TS EN ISO 14692-2 Glass fiber reinforced plastic (ctp) pipe systems - used in the oil and gas industry - Part 2: Specifications and manufacture 

TS EN ISO 14692-3 Glass fiber reinforced plastic (ctp) pipe systems - used in the oil and gas industry - Part 3: System design 

TS EN 13645 Installation and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 T and 200 T 

TS 3037 ISO 7936 Determination and demonstration of charcoal-swimming-immersion properties-General instructions for apparatus and processes

TS EN ISO 4263-2 Petroleum and related products - Determination of aging behavior of doped mineral oils and fluids - Toast test - Part 2: Process for Hfc type hydraulic fluids 

TS EN ISO 15761 Sliding, ball and non-return valves for the oil and gas industry

TS EN ISO 10442 Oil, chemical and gas service industries - Integral geared centrifugal type air compressors in sets 

TS EN ISO 11541 Natural gas - Determination of water content at high pressure 

TS EN 13856 Automotive lpg systems - Minimum requirements for owner's manual 

TS EN ISO 14692-1 Oil and gas industry - Glass fiber reinforced plastic pipes - Part 1: Terms, symbols, applications and materials 

TS EN ISO 14692-2 Oil and gas industry - Glass fiber reinforced plastic pipes - Part 2: Qualification and manufacturing 

TS EN ISO 14692-3 Oil and gas industry - Glass fiber reinforced plastic pipes-Part 3: System design 

TS EN ISO 14692-4 Oil and gas industry - Glass fiber reinforced plastic pipes-Part 4: Installation and operation 

TS EN 1860-3 BBQ ignition lighters and barbecue charcoal briquettes -Features and test methods 

TS EN 10301 Steel pipes and fittings for onshore and offshore pipelines - Friction reducing inner lining for the transport of non-corrosive gas 

TS EN ISO 10418 Oil and gas industry - Production marine platforms - Analysis, design, installation rules and control of main safety systems 

TS EN 13760 LPG filling system for light and heavy commercial vehicles - Nozzles (test guns), test rules and dimensions 

TS EN 14265 Coal pyrolysis derivatives-Coal tar and pitch based binders and related products: Dye tar-Distinguishing properties and test methods

TS EN ISO 10417 Oil and gas industry-Underground safety valve systems-Design, installation, operation and rearrangement 

TS EN ISO 10427-2 Oil and gas industry-Well cementing equipment- Part 2: Centering and stop ring test 

TS EN ISO 10427-3 Oil and gas industry-Well cementing equipment- Part 3: Performance tests of cementing floating equipment

TS EN ISO 13710 Positive displacement pumps for petroleum and petrochemical and natural gas plants 

TS EN 14331 Liquid petroleum products-Separation and identification of fatty acid methyl esters (yame) from intermediate distillate fuels-Liquid chromatography (lc) / gas chromatography (gc) method 

TS EN ISO 15463 Oil and gas industry - Field inspection of new casing pipes, production pipes and straight end drill pipes

TS EN ISO 20623 Petroleum and related products-Determination of overpressure and anti-wear properties of fluids-Four-ball method (European conditions) (ISO 20623: 2003) 

TS EN ISO 20763 Petroleum and related products-Determination of anti-wear properties of hydraulic fluids-Wind rose pump method 

TS EN ISO 20783-2 Petroleum and related products-Determination of emulsion stability of refractory fluids-Part 2: Class hfb fluids 

TS EN ISO 20847 Petroleum products - Automotive fuels - Determination of sulfur - Energy separation x-ray fluorescence spectrometry (iso 20847: 2004) 

TS 1449 LPG loading and unloading rules - Safety requirements 

TS EN ISO 8754 Petroleum products - Determination of sulfur content - Energy separation x-ray fluorescence spectrometry method 

TS EN ISO 4257 Liquefied petroleum gases - Sampling method

TS 10942 EN 377 / A1 Lubricants - for gas armatures and controllers operating in a combustible gas environment (except those used in industrial processes)

TS 3355 Gas oil - used for heating and lighting 

TS 2031 Petroleum products - Determination of Saybolt viscosity 

TS 2179 Liquefied petroleum gases (lpg) - Rules of use 

tst 9188 Hydraulic oils - Petroleum based (h-515, h-520 and c-635) and polyalphaolefin based (h-537, h-538 and h-544) (stanag 3748)

TS EN 1860-2 Solid fuels and igniters for barbecues and barbecues - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Specifications and test methods 

tst 200660937 Recycled oils - Oils produced from waste oils by reprocessing

TS EN ISO 3838 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary cap pynometer and bikapillary picnometer methods 

TS EN ISO 3838 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary cap pynometer and bikapillary picnometer methods 

TS EN ISO 4257 Liquefied petroleum gases - Sampling method 

TS EN ISO 6245 Petroleum products-Ash determination 

TS EN ISO 8754 Petroleum products-Determination of sulfur content-Energy separation x-ray fluorescence method

TS EN ISO 6978-2 Natural gas-Determination of mercury-Mercury sampling by amalgamation on gold / platinum alloy 

TS EN 14331 Liquid petroleum products - Separation of fatty acid methyl esters (yame) from intermediate distillation products and determination of their components - liquid chromatography (lc) and gas chromatography (gc) method 

TS EN ISO 12185 Crude oil and petroleum products - Determination of density - Oscillating u-Tube method 

TS EN ISO 20847 Petroleum products - Automotive fuels - Determination of sulfur content - Energy separation x-ray fluorescence spectrometry method 

TS EN ISO 20847 Petroleum products - Automotive fuels - Determination of sulfur content - Energy separation x-ray fluorescence spectrometry method

TS EN ISO 15547-1 Petroleum petrochemical and natural gas industry - Plate type heat exchangers section 1: Plate and cage type heat exchangers 

TS EN ISO 15547-2 Oil, petrochemical and natural gas industries - Plate heat exchangers - Part 2: Bronze aluminum plate heat exchangers 

TS EN ISO 19739 Determination of natural gas-sulfur compounds by gas chromatography 

tst 7838 Viscosity-temperature relations in petroleum products

TS EN ISO 4263-1 Petroleum and related products - Determination of the aging behavior of doped mineral oils and fluids - Toast test - Part 1: Process for mineral oils 

TS ISO 6249 Petroleum products - Gas turbine fuels - Determination of thermal oxidation stability - Jtfot method 

tst 200766362 Fuel stations - for refueling aircraft - Safety requirements  

tst 200766838 Liquefied natural gas (sdg) storage guidelines  

TS 13484 Lubricating oils, industrial oils and related products (class L) - Heat transfer oils (group q)

TS 6520 Determination of water solubility in hydrocarbon and aliphatic ester lubricants 

TS EN ISO 4257 / AC Liquefied petroleum gases - Sampling method 

TS EN ISO 13628-7 Oil and gas industry - Design and operation of underwater production systems - Part 7: Finishing / maintenance booster systems 

TS EN ISO 13628-9 Oil and gas industry - Design and operation of underwater production systems - Part 9: Internal flow systems for remote application devices (rot)

TS EN ISO 19903 Oil and gas industries - Stationary concrete offshore structures 

TS ISO 8068 Lubricating oils, industrial oils and related products (class l) - group t: Turbine oils 

TS ISO 8068 Lubricating oils - Industrial oils and related products (class l) - Type t (turbines) - Characteristics of lubricating oils used for turbines

TS EN ISO 14692-4 / AC Oil and gas industry-Glass reinforced plastic (grp) pipes-Part 4: Fabrication, laying and applied processes 

TS EN 15487 Ethanol - Used as gasoline blending component - Determination of phosphorus content - Ammonium molybdate spectrometry method 

TS EN ISO 23251 Pressure relief and pressure relief systems for the petroleum, petrochemical and natural gas industries 

TS EN 15471 Liquefied petroleum gases (lpg) - Determination of dissolved residues - High temperature gravimetric method

TS EN ISO 15403-1 Natural gas - Natural gas used as compressed fuel in vehicles - Part 1: Quality marking 

TS EN ISO 17078-2 Oil and gas industry - Drilling and production equipment - Part 2: Flow control devices for side pocket mandrels 

TS EN 15268 Fuel filling stations - Safety features for the construction of submersible pumps 

TS EN ISO 10438-1 Oil, petrochemical and natural gas industries - Lubrication, shaft sealing, control oil systems and auxiliary equipment - Part 1: General requirements 

TS EN ISO 10438-2 Oil, petrochemical and natural gas industries - Lubrication, shaft sealing, control oil systems and auxiliary equipment - Part 2: Special purpose oil systems 

TS EN ISO 10438-3 Oil, petrochemical and natural gas industries-Lubrication, shaft sealing, control oil systems and auxiliary equipment- Part 3: General purpose oil systems 

TS EN ISO 10438-4 Oil, petrochemical and natural gas industries - Lubrication, shaft sealing, control oil systems and auxiliary equipment - Part 4: Self-acting gas sealing support systems (iso 10438-4: 2003) 

TS EN ISO 10440-1 Oil and gas industry- Rotary type positive displacement compressors- Part 1: Processing compressors (oil-free) 

TS EN 13942 Oil and gas industry - Pipeline transport systems - Line valves

TS 13435 Lubricating oils - Determination of toxicity tests in aqueous media - Preparation of samples and evaluation of test results 

tst EN ISO 10424-1 Oil and gas industry-Rotary drilling rig-Part 1: Rotary drilling pot (casing) elements  

tst EN ISO 10424-2 Oil and gas industry-Rotary drilling rig-Part 2: Threading and gauging of rotary, post-screw connections

TS EN ISO 14723 Oil and gas industry - Pipeline transport systems - Underwater pipeline valves

TS EN ISO 14691 Oil and gas industry - Flexible couplings for mechanical transmission - General purpose applications 

TS EN ISO 14310 Oil and gas industry - Well equipment - Annulus separators and bridge plugs 

TS EN 12850 Bitumens and Bituminous binders - Determination of ph value of bitumen emulsions

TS EN 15471 Liquefied petroleum gases - Determination of dissolved residues - High temperature gravimetric method 

TS EN ISO 13500 / AC Oil and gas industry-Drilling fluids-Specifications and tests 

tst EN 14961-1 Solid biofuels-Fuel properties and classes - Part 1: General specifications  

TS EN ISO 10407-2 / AC Oil and gas industry-Rotary drilling rig-Part 1: Inspection and classification of used drilling pot elements

TS EN ISO 10416 Oil and gas industry - Drilling fluids - Laboratory examination 

TS EN ISO 10416 Oil and gas industry - Drilling fluids - Laboratory examination

 TS EN ISO 20815 Oil, petrochemical and natural gas industries - Production assurance and reliability management 

TS EN ISO 20815 Oil, petrochemical and natural gas industries - Production assurance and reliability management 

TS EN ISO 10426-1 / AC Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications 

TS EN ISO 15544 Oil and gas industry - Offshore production facilities - Guidelines and guidelines for emergency response (Including ISO 15544: 2000, Amd 1: 2009) 

TS 13369 Lubricating Oils, Industrial Oils and Related Products (Class L) - Base Oils 

tst CWA 15940 Automotive fuels-Paraffinic diesel fuel obtained by synthesis or hydrogen treatment-Features and test methods

TS EN 60603-7-7: 2010 Connectors for electronic devices - Part 7-7: 600 Detail specification for 8 path, shielded, free and fixed connectors for data transmission with frequencies up to MHz 

TS EN 12081 + A1: 2010 Railway applications - Axle boxes - Lubricating greases 

TS EN 12082 + A1 Railway applications-Axle boxes-Performance test 

TS EN 14865-1 + A1: 2010 Railway applications - Axle box lubricating greases - Part 1: Test method for lubrication capability 

TS EN 14865-2 + A2: 2010 Railway applications - Axle box lubricating greases - Part 2: 200 method of testing mechanical stability up to vehicle speed km / h 

TS EN ISO 13628-1 / A1 Oil and gas industry - Design and operation of seabed production systems - Part 1: General requirements and recommendations 

TS EN 15938 Automotive fuels - Ethanol blending component and ethanol (e85) automotive fuel - Determination of electrical conductivity 

TS ISO 4406 Hydraulic fluid power-Fluids-Coding method of contamination level with solid particles 

TS ISO 13357-2 Petroleum products- Lubricating oils- Determination of leachability section 2: for dry oils 

TS ISO 6296 Petroleum products-Water determination-Potentiometric profit fischer titration method

TS EN ISO 20783-1 Petroleum and related products-Determination of emulsion stability of refractory fluids-Part 1: Class hfae fluids 

TS EN ISO 20843 Petroleum and related products - Determination of ph value of Hfae, hfas and hfc type refractory fluids 

TS EN ISO 4404-2 Petroleum and related products-Refractory hydraulic fluids - Determination of corrosion resistance-Part 1: Water-free fluids

TS EN ISO 3405 Petroleum products - Determination of distillation properties at atmospheric pressure 

TS 12560 Fuel Pumps - Used in distribution units in fuel stations 

TS 11584 Lubricating oils, industrial oils and related products - Class L - Greases (Group x) - Used in road vehicles 

TS 116 Test method for determination of density of creosote 

tst 201185409 Industrial lubricants-Vegetable and animal based base oils  

tkt 201185477 Lubricating oils-Anti-slip lubricants-Used in transfer belts  

tkt 201185479 Stabilizing suspensions for lubricating oils-Molybdenum disulfide  

tst 6565 Calculation of pressure losses in gas distribution networks  

TS EN ISO 19906 Oil and gas industry - Arctic marine structures

TS 11411 Lubricating oils, industrial oils and related products (class l) - heat treatment oils (group q) 

TS 13524 Lubricating oils - Used in automatic gearboxes of motor vehicles

TS EN 13614 Bitumen and bituminous binders - - Determination of the adhesion of bituminous emulsions by immersion in water

TS 13260 Workplace - General rules for fuel storage and filling facilities 

TS EN 12846-1 Bitumens and bituminous binders-Determination of flow time of bitumen emulsions with flow viscometer-Part 1: Bituminous emulsions 

Safety regulations - For electrical appliances used in domestic and similar areas - Part 60335-2: Particular requirements for roasters, grills and similar portable cooking appliances

TSE CEN ISO / TR 13881: 2011 Oil and gas industry -Classification of products, processes and services and evaluation of conformity 

TSE CEN ISO / TR 13881: 2011 Oil and gas industry -Classification of products, processes and services and evaluation of conformity

TSE CEN ISO / TR 13881: 2011 Oil and gas industry -Classification of products, processes and services and evaluation of conformity 

TSE CEN ISO / TR 13881: 2011 Oil and gas industry -Classification of products, processes and services and evaluation of conformity

TS 13425 / T2 Lubricating oils, industrial oils and related products (class L) - group G: Slideway oils 

TS EN ISO 10414-2 Oil and gas industry-Field testing of drilling fluids-Part 2: Oil-based liquids 

TS ISO 13738 Lubricating oils, industrial oils and related products (class l) - internal combustion engine oils (group e) - two-stroke gasoline engine oils (eg egb, egc and egd types) - Specifications 

TS ISO 24254 Lubricating oils, industrial oils and related products (Class L) - Group E (internal combustion engine oils) - Used in four-stroke petrol engines and drivetrain (EMA and EMB types) - Specifications 

tst 12663 Fuel outlets and / or fuel outlets - General rules  

TS EN 14780 Solid biofuels-Sample preparation

 TS EN ISO 21809-1 Oil and gas industries - External coatings for buried or submerged pipelines for pipeline transport systems - Part 1: Polyolefin coatings (3-Plate pe and 3-Plate pp) 

TS 2177 / T2 Fuel oil 0

TS 13526 Heat treatment oils - Determination of cooling properties by cooling curve analysis 

TS 6519 Petroleum based lubricating oils - Calculation of carbon distribution and structural group analysis - NDM method 

TS EN ISO 15546 Oil and gas industries - Aluminum alloy drill pipe 

TS EN 16114 Management consulting services 

TS EN 15590 Determination of the rate of aerobic microbial activity using solid fuels- Recycled-Real respiration index 

TS EN 15413 Method for the preparation of test samples from solid fuels - recovered - laboratory samples 

TS EN 15411 Solid fuels - Methods for determination of the content of recovered trace elements (as, ba, be, cd, co, cr, cu, hg, mo, mn, ni, pb, sb, se, tl, v and zn) 

TS EN 15410 Solid fuels - Methods for the determination of the content of recovered-basic elements (al, ca, fe, k, mg, na, p, si, ti)

TS EN 15440: 2011 / AC Solid fuels - Methods for determination of recovered biomass content 

TS EN ISO 20312 Oil and gas industry-Aluminum alloy component drilling chains working limits and design 

TS EN ISO 20846 Petroleum products - Automotive fuels - Determination of sulfur content - Ultraviolet fluorescence method 

TS EN ISO 20846 Petroleum products - Automotive fuels - Determination of sulfur content - Ultraviolet fluorescence method 

TS 13525 Lubricating oils - Determination of anti-friction properties used in automatic gearboxes 

TS 9782 Plant and equipment for filling and discharging of aerosol fuel kerosene and diesel fuels (used for military purposes) 

TS 8457 Lubricating oils - Additive - Determination of sludge and corrosion trends 

Lpg equipment and accessories - Lpg equipment for vehicle filling stations - Part 14678: Components and installation conditions other than dispensers 

TS 13484 / T1 Lubricating oils, industrial oils and related products (class L) - Heat transfer oils (group q) 

TS ISO 18283 / Cor. 1 Hard coal and coke - Manual sampling 

TS EN ISO 13032 Petroleum products - Automotive fuels - Determination of low concentration of sulfur - Energy dispersive x-ray fluorescence spectrometric method

TS 12154 / T2 Lubricating oils-Used in textile machinery 

TS 11795 / T1 Lubricating oils, industrial lubricants and related products (class l) - miscellaneous lubricants (group y) - used in tractors and heavy machinery 

TS 13486 / T1 Lubricating oils, industrial oils and related products (class l) - fluidity regulators 

tst 2177 Fuel oil

TS EN 16158 Animal feeds - Determination of semduramycin content - Liquid chromatography using a “tree” analytical approach 

TS 2177 / T3 Fuel oil 

TS EN 15492 Ethanol - used as a blending component in ethanol - Determination of inorganic chloride and sulfate content - Ion chromatography method 

TS 13569 Lubricating oils - Guideway oils - Used in the guideway of machine tools - Determination of adhesion prevention 

tst ISO 26422 Petroleum and related products-Determination of shear stability of lubricating oils containing polymers-Tapered roller bearing method  

TS EN 15234-2 Kato biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use 

TS EN 15234-4 Kato biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use 

TS EN 15234-3 Kato biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use 

TS EN 15234-5 Kato biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use 

TS EN 15234-6 Kato biofuels - Fuel quality assurance - Part 6: Non-wood pellets for non-industrial use

TS 12153 / T1 Lubricating oils, industrial oils and related products (class l) - mold oils (group b) 

TS EN 589: 2010 + A1 Automotive fuels - LPG - Specifications and test methods 

TS EN 13617-2 Fuel stations - Part 2: Safe disconnection devices for distribution units with and without pumps - Safety requirements for construction and performance 

TS EN 13617-3 Fuel stations - Part 3: Shut-off valves - Safety requirements for construction and performance 

TS EN 13617-4 Fuel stations - Part 4: Rotary connections for pump and non-pump distribution units - Safety requirements for construction and performance 

TS EN 13352 Performance characteristics of automatic tank content indicators 

TS EN 16135: 2011 (EN) Automotive fuels - Gasoline - Determination of manganese content in unleaded gasoline - Flame atomic absorption method (faas) 

TS 12181 / T1 Protective oils-Adding to engine oils used in internal combustion engines 

TS 11299 / T3 Lubricating oils, industrial oils and related products (class l) - group m: Metal working fluids 

TS 12351 / T1 Lubricating-Oils-Total loss systems (ts-L-An) used

TS EN 15415-2 Solid fuels - Recycled - Part size distribution determination - Part 2: Maximum projection length method for large-sized parts (manually applied) 

TS 8036 Turbine fuels - Used in aeronautics (jet a, jet a1, jet b) - Specifications 

TS 13545 Gasoline - used in aviation - Features and test methods 

TSE K 158 Glass working fluid 

TSE K 146 Lubricating oils, industrial oils and related products (class l) - group y: Gas washing oils - used for the removal of hydrocarbons from coke gas 

TSE K 156 Lubricating oils, industrial oils and related products (class l) - other oils (group y): Rust remover oils 

TS EN 16091 Liquefied petroleum products-Medium distillation and fatty acid methyl ester (fame) fuels and mixtures-Fast determination by small size oxidation method 

TS EN ISO 6974-1 Natural gas-Gas chromatographic analysis-Determination of composition with a given uncertainty-Part 1: Guidance for sample-based analysis 

17078-2: 2009 / AC Oil and gas industry - Drilling and production equipment - Part 2: Flow control devices for side pocket mandrels 

TS EN ISO 6974-2 Natural gas-Gas chromatographic analysis-Determination of the composition with a given uncertainty-Part 2: Characteristics of the measuring system and statistical data processing techniques

TS EN 13617-1 Fuel stations - Part 1: Pumped and non-pumped distribution units and remote pumping units - Safety requirements for construction and performance 

TS EN 14769 Bituminous and bituminous binders - Accelerated long-term aging process with pressurized aging container (pav) 

TS EN 14770 Bitumen and bituminous binders - Complex cutting module and determination of phase angle - Dynamic cutting rheometer (dsr) 

TS EN 14771 Bitumen and bituminous binders - Determination of creep rigidity in bending - Bending beam rheometer (bbr) 

TS EN ISO 10432 Oil and gas industry - Underground equipment - Floor safety valve

TS EN 589 + A1 Automotive fuels - LPG - Specifications and test methods 

TSE ISO / TS 29001 Petroleum, petrochemical and natural gas industries - Industry-specific quality management systems - Requirements for organizations providing products and services 

tst 1739 Determination of mercaptan sulfur in jet fuels (color - marker, amperometric and potentiometric methods)  

TS 2031 Petroleum products - Determination of Saybolt viscosity  

TS 9503 Flue gases - Combustion of distillate fuels - Determination of smoke density 

TS 6120 Steam turbine oils - Determination of oxidation stability - Rotary bomb method 

TS 4847 Lubricating oils and greases - Determination of evaporation loss 

TS 11532 Corrosion inhibitors - used in engine cooling systems  

TS 1763 Aviation turbine fuels - Determination of naphthalene type hydrocarbons - Ultraviolet spectrophotometry method 

TS 2549 Kerosene-Determination of Combustion Quality 

TS 7838 Petroleum products - Viscosity-temperature graphics 

TS 5212 Classification of metal working fluids and related substances  

TS 7120 Converting analysis results of C5 and lighter hydrocarbons to gas volume, liquid volume or mass basis 

TS 1765 Lubricating oils and additives - Determination of phosphorus 

TS 7840 Hydraulic oils, aerospace turbine engine oils and other highly refined oils - Determination of corrosion and oxidation stability 

tst 1985 Determination of sulphated ash in lubricating oils and additives  

TS 1599 Method of purification of gasoline and naphtha from pentane and lighter hydrocarbons (depentanization method)  

TS 11203 Anti-fogging liquids - used in road vehicles  

TS 2125 Lubricating greases - Determination of apparent viscosity

TS 11434 Lubricating oils, industrial oils and related products (Class L) - Liquids for temporary protection against corrosion (Group R) - Liquids used for the protection of metallic materials and products 

TS EN ISO 19901-6 / AC Oil and gas industry - Offshore structures - Special requirements - Part 6: Maritime operations

TS 13425 / T3 Lubricating oils, industrial oils and related products (class L) - group G: Slideway oils 

TS 13369 / T1 Lubricating Oils, Industrial Oils and Related Products (Class L) - Base Oils 

TS ISO 8943 Refrigerated light hydrocarbon fluids - Sampling from liquefied natural gas - Continuous method 

TS EN 228 Automotive fuels - Unleaded gasoline - Specifications and test methods 

TS ISO 18132-2 Refrigerated liquid hydrocarbon fluids-General requirements for automatic level meters-Section 2: Gauges for refrigerated tube shore tanks 

TS ISO 18132-3 Refrigerated hydrocarbon and non-petroleum-based liquefied gas fuels-General requirements for automatic tank gauges-Part 3: Automatic tank gauges for marine tankers and floating storage for liquefied petroleum gases and chemical gases 

TS EN ISO 23936-2 Petroleum, petrochemical and natural gas industry - Non-metallic materials in contact with the oil and gas production environment - Section 2: Elastomers 

TS ISO 18132-1 Refrigerated hydrocarbon and non-petroleum based liquefied gas fuels - General requirements for automatic tank gauges - Part 1: Automatic tank gauges for liquefied natural gas marine tankers and floating storage

TS EN ISO 13706: 2011 (EN) Oil, petrochemical and natural gas industry - Air cooled heat exchangers 

TS ISO 616 Coke - Determination of refractive indices 

TS EN ISO 17078-3 Oil and gas industry - Drilling and manufacturing equipment - Part 3: Operating tools, pulling tools and starter tools and latching edge-Pack mandrels 

TS EN ISO 13678 Oil and gas industry - Testing and evaluation of screw components in the use of enclosures, piping, line pipe and drilling elements 

TS 2178 Petroleum products - Fuels (class f) - Liquefied petroleum gases (lpg) - Features 

TS EN 590 / tst T1 Automotive fuels - Diesel - Requirements and test methods  

TS ISO 540 Determination of melting ability of fuel ashes 

tst EN 14588 Solid biofuels - Terms, descriptions and explanations  

TS EN ISO 10441 Oil, petrochemical and natural gas industry - Flexible couplings for mechanical power transmission - Special applications 

TS EN ISO 13500 / T1 Oil and gas industry - Drilling fluids - properties and tests 

TS 11299 / T4 Lubricating oils, industrial oils and related products (Class L) - Group M: Metal working fluids

TS ISO 1928 Solid mineral fuels - Determination of gross thermal value by bomb calorimetry method and calculation of net thermal value 

TS EN 14588 Solid biofuels - Terms, descriptions and descriptions 

TS EN ISO 14310 Oil and gas industry - Well equipment - Annulus separators and bridge plugs 

tst 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms  

tst 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms  

TS ISO 10838-3 Polyethylene pipe systems - For the supply of gas fuels - Mechanical fittings section 3: Thermoplastic fittings for pipes with nominal outside diameter equal to or less than 63 mm 

TS 13484 / T2 Lubricating oils, industrial oils and related products (Class L) - Heat transfer oils (group q) 

TS ISO 567 Coke - Determination of bulk density in a small container

TS ISO 3987 / Cor 1 Petroleum products - Determination of sulphated ash in lubricating oils and additives 

TS 13581 Petroleum gases (at atmospheric pressure and at room temperature) - Determination of sulfur - Oxidizing microculometry method 

tst 201391611 Greases - used in automotive wheel bearings 

TS 2177 / T4 Fuel oil 

TS 2739 Greases - Used in wheel bearings of motor vehicles - Determination of leaking tendency under accelerated conditions 

TS 12153 / T2 Lubricating oils, industrial oils and related products (class L) - mold oils (group b) 

TSE K 190 Bore screwed pipe fittings - Temper cast iron - Used in natural gas installations 

TS ISO 11413 Plastic pipes and fittings - Preparation of a test piece from a polyethylene pipe with electrical melt welded joint 

TS 13550 Four-stroke petrol motor oils - Used in clutch systems - Determination of friction properties 

TS 12330 / T3 Lubricating oils, industrial oils and related products (Class L) - Group E: Engine oils - Used in gasoline and diesel engines 

TS 9660 Lubricating Oils-Determination of viscosity at high temperature and high shear rate-Conical plug viscometer method 

tst CEN / TS 15940 Automotive fuels-Paraffinic diesel fuel obtained by synthesis or hydrogen treatment-Features and test methods  

TS 9350 Residual fuel oil - Determination of cleanliness and compatibility with the blending stock - Stain method 

TS 1539 Petroleum products - Determination of sulfur - Decomposition with high pressure decomposition device (bomb) and lamp device 

TS EN 14678-1: LPG equipment and accessories - Construction and performance of LPG equipment for vehicle filling stations - Part 1: Dispensers (distribution units) 

TS 5030 Lubricants-For drilling casing and production pipe threads used in high-pressure oil and natural gas well processes  

TS 7467 Determination of trace ethylene glycol in used engine oils 

tst 11676 Oil odor - used in industry  

TS 2884 Petroleum and petroleum products - Medium distillation fuels and solvents - Qualitative determination of active sulfur species (mercaptans, hydrogen sulfide and elemental sulfur) (doctor's experiment) 

TS 11262 Lubricating oils, industrial oils and related products (Class L) - Used in shaft bearings, plain bearings, roller bearings and related couplings (Group F)

TS EN 16294 Petroleum products and oil and fat derivatives - Methyl esters of fatty acids (YAME / Biodiesel) - Determination of phosphorus content - Optical Emission Spectral analysis with inductively coupled plasma (ICP OES) 

TS EN 16345 Bitumen and bituminous binders - Bituminous emulsions - Determination of flow time - Redwood no. II Viscometer 

TS EN ISO 10723 Performance evaluation for analytical systems in natural gas lines 

TS EN ISO 13705 Oil, petrochemical and natural gas industry - Flame heaters for general refinery services 

TS EN 16028 Railway applications - Wheel sets and bogies - Drive axles - Design method 

TS ISO 1171 Solid mineral fuels - Determination of ash content 

TS EN 16300 Automotive fuels - Determination of iodine value in fatty acids methyl esters (YAME) - Calculation method - Using gas chromatography data 

TS EN 14678-3 Lpg equipment and accessories - Construction and performance of lpg equipment for vehicle filling stations - Part 3: Filling installations in commercial and industrial plants

TS EN ISO 11299-1 Pipe systems for the renewal of underground gas networks Plastic - Part 1: General 

TS EN ISO 11299-3: 2013 Pipe systems for renewal of underground gas networks Plastic - Part 3: Liner with narrow-fit pipes  

TS EN ISO 6974-1: 2012 / AC Natural gas-Gas chromatographic analysis-Determination of the composition with a given uncertainty-Part 1: Guidance for sample-adapted analysis 

TS EN ISO 12212 Oil, petrochemical and natural gas industry - Spiral surface heat exchangers - Hairpin heat exchangers 

TS EN ISO 13736 Flash point determination - Abel closed cup method 

TS EN ISO 13503-1 Oil and gas industry-Complementary fluids and materials-Part 1: Measurement of viscous properties of complementary fluids 

TS EN ISO 3183: 2012 Oil and gas industries - Steel pipes for pipeline transport systems 

TS EN 1860-1: 2013 Solid fuels and igniters for barbecues and barbecues - Part 1: Solid fuel barbecues - Specifications and test methods 

tst 11274 Oils-Used in air filters  

EN ISO 13354: 2014 Oil and gas industries - Drilling and production equipment - Gas routing equipment for shallow gas beds  

TSE K 200 Bitumen additives - Used to increase peel strength in surface coating and bituminous mixture construction 

TS EN 16214-4 Sustainable produced biomasses in energy applications - Principles, criteria, markers and validators for biofuels and biofuels products - Part 4: Green room gas emission balance calculation method - Using life cycle analysis approach 

TS EN 14274 Automotive fuels - Gas and diesel fuel quality assessment - Fuel quality monitoring system (YKS) 

TS EN 14275 Automotive fuels - Evaluation of gasoline and diesel quality - Sampling from retail and special fuel distribution units 

TS EN 16143 Petroleum products - Determination of the quantity of selected polycyclic aromatic hydrocarbons (PAH) and benzo (a) pyrrine (BaP) in the oils used in the shaping - GC / MS analysis and use of double LC treatment 

TSE CEN / TR 15993 Automotive fuels - Ethanol (E85) automotive fuel - Desired parameters and their individual limits and determinations 

TS EN 13012 Refueling stations - Construction and performance requirements for automatic refueling guns on fuel distribution units 

TS EN ISO 12922 Lubricating oils, industrial oils and related products (class I) - Part h (for hydraulic systems) hfae, hfas, hfb, hfc, hfdr and hfdu types -Features

TS EN ISO 4404-1 Petroleum and related products-Determination of corrosion resistance of refractory hydraulic fluids-Part 1: Water-containing fluids 

tst 11018 Lubricating oils - Used in two-stroke petrol engines - Determination of lubrication  

TS ISO 6619 Petroleum Products and Lubricating Oils-Neutralization Number-Potentiometric Titration Method

TS EN ISO 20823 Petroleum and related products - Determination of flammability properties of fluids in contact with hot surfaces - Manifold ignition test 

TS EN ISO 10434 Bolted, capped steel, gate valves for petroleum and petrochemicals and related industries 

TS EN 15234-1 Solid biofuels - Fuel quality assurance - Part 1: General specifications 

TS ISO 11158 Lubricating oils, industrial oils and related products (Class L) - Group H (for hydraulic systems) - Types HH, HL, HM, HV and HG -Features 

TS 8459 Internal pressure control and limitation rules for natural gas transport and distribution pipelines  

tst 3645 Method for determination of compressive strength of bituminous hot-coating mixtures  

TS 6497 Polymer-containing lubricating oils - Determination of shear stability - Sonic method

TS 13425 / T4 Lubricating oils, industrial oils and related products (class L) - group G: Slideway oils 

TS EN 15944 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometer method (ICPOES) 

TS 13369 / T2 Lubricating Oils, Industrial Oils and Related Products (Class L) - Base Oils

TS 4393 Wood protection rules-Rail wood sleepers with creosote  

TS EN ISO 14998 Oil and gas industries - Well equipment - Finishing accessories 

TS EN 14141 Valves for the transport of natural gas in pipelines - performance characteristics and tests 

TSE CEN / TR 16569 Automotive fuels - vehicle emissions and performance Assessment of the effects of E10 gasoline 

TS EN 1360 Rubber and plastic hoses and hose assemblies - For metered fuel distribution units - Specification 

TS EN 13483 Rubber and plastic hose and hose assemblies - Internal steam recovery in metered fuel distribution systems - Features 

TS EN 14125 Thermoplastic and flexible metal pipeline - used in underground pavers in oil filling stations 

TS EN 13179-1 Tests for aggregates used as fillers in bituminous mixtures - Part 1: Delta ring and ball test 

TS EN 16329 Diesel and domestic heating fuels-Determination of cold filter clogging point - Linear cooling bath method 

TS EN ISO 19901-7 Oil and gas industry - Offshore structures - Special requirements - Part 7: Floating marine structures and mobile marine units - Fixing systems

TSE CEN / TR 16514 Automotive fuels - Roadmap, test methods and requirements for E10 + gasoline - unleaded gasoline containing more than 3,7% (m / m) oxygen 

TS EN ISO 4264: 2007 / A1 Petroleum products-Medium distillate fuels- Determination of cetane index with the help of four variables 

TS EN 15322 Bitumen and bituminous binders - for the identification of katbek and thinned bituminous binders - General principles 

TS EN 1429 Bitumen and bituminous binders - Determination of sieving residue in bitumen emulsions and determination of storage stability by sieving process 

TS EN ISO 13686 Natural Gas - Quality indication 

TS EN 15357 Solid fuels recovery - Terminology, definitions and descriptions 

TS EN 14274: 2013 / AC Automotive fuels - Fuel and diesel fuel quality assessment - Fuel quality monitoring system (YKIS) 

TS EN 15721 Ethanol as a mixing component for petroleum - Determination of high alcohols, methanol and volatile impurities - Gas chromatography method 

TS EN ISO 19902: 2007 / A1 Oil and gas industries - Fixed steel seaside structures 

TS EN 590 Automotive fuels - Diesel (diesel) - Requirements and test methods 

TS EN 1594 Gas supply systems - Pipelines - Maximum operating pressure above 16 bar - Functional specifications 

TS EN 15779 + A1 Petroleum products and fat and oil derivatives - Fatty acid methyl esters for diesel engines (yame) - Analysis of highly unsaturated fatty acid methyl esters 

TSE CEN / TR 16557 Automotive fuels - High YAME diesel fuel blends (B11 - B30) - fuels and blends with diesel fuel - Background, limits and determination of required parameters 

TSE CEN ISO / TS 12747 Oil and gas industry - Pipeline transport systems - Recommended application for pipe life extension 

TSE CEN ISO / TR 13624-2 Oil and gas industry- Drilling and production equipment-Part 2: Methodology, operation and verification of deep water drilling 

TS EN ISO 19900 Oil and gas industry - General specifications for offshore structures 

TSE CEN ISO / TR 19905-2: 2013 Oil and gas industry- Stations - Special evaluation of mobile offshore structures - Part 2: Jack-ups interpretation and detailed sample calculation

TSE K 214 Pyrolytic liquid fuel - obtained by pyrolysis of used rubber and plastics 

TS EN ISO 13734 Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods 

TS 1538 Liquid hydrocarbons and distillation residues - Determination of acidity 

TS EN 590 Automotive fuels - Diesel (diesel) - Requirements and test methods 

TS 11796 / tst T2 Lubricating oils, industrial oils and related products (class l) lubricating oils-used in compressors (group d)  

TS 11796 Lubricating oils, industrial oils and related products (Class L) - Compressor oils (Group D) - Used in air and gas compressors and vacuum pumps 

TS EN 16423 Liquefied petroleum gases (LPG) - Determination of dissolved residue - Gas chromatographic method - Using liquid-column injection 

TSE K 265 Bitumen Additives-High Asphaltene-Bitumen For Waterproofing

TS 10650 Lubricating oil (used for military purposes) - General purpose, protective 

TS EN ISO 3183 Oil and gas industries - steel pipes for pipeline transport systems 

TS EN 16321-1 Recovery of petroleum vapors - Filling of motor vehicles in service stations - Part 1: Test methods for the assessment of approval efficiency of petroleum vapor recovery systems 

TS EN 16321-2 Recovery of petroleum vapors - Filling of motor vehicles in service stations - Part 2: Test methods for verification of oil vapor recovery systems in service stations 

TS EN ISO 8311 Chilled light hydrocarbon and non-petroleum based liquefied gas fuels - Calibration of membrane tanks and independent prismatic tanks on ships - Manual and internal electro-optical distance regulation methods 

TS EN 14214 + A1 Liquid Petroleum Products-Fatty Acid Methyl Esters (Yame / Biodiesel) -Used in Diesel Engines and Heating Applications  

TS 9809 Valves - Cast iron ball valves - For combustible gases 

TS EN 15751 Automotive fuels - Blends of fatty acid methyl esters (yame) fuels and diesel fuel - Determination of oxidation stability by accelerated oxidation 

TSE CEN / TS 16214-2 Principles, criteria, indicators and validators - Sustainability criteria for biofuels and biofluid production for energy applications - Part 2: Conformity assessment including surveillance chain and mass balance 

TS EN 14214 + A1 Liquid Petroleum Products-Fatty Acid Methyl Esters (Yame / Biodiesel) -Used in Diesel Engines and Heating Applications 

TS EN ISO 15589-2 Oil, petrochemical and natural gas industries - Cathodic protection of pipeline transport systems - Part 2: Offshore pipelines 

TS EN ISO 13085 Oil and gas industries - Aluminum alloy pipes - For use in wells installations 

TS EN 12662 Liquid petroleum products-Medium distilled fuels-Pollution determination 

TSE CEN / TR 16680 Liquid petroleum products - Investigation of internal diesel injector adhesion deposit mechanisms and the effects of corrosion inhibitors 

TS EN ISO 15970 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor 

TS EN ISO 15970 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor 

TS EN ISO 15112 Natural gas - Energy determination 

TS EN ISO 13503-6 Petroleum and natural gas industry - Complementary fluids and materials - Part 6: Procedure for leakage measurement of completion fluids under dynamic conditions (ISO 13503-6: 2014) 

TS EN ISO 11960 Oil and gas industries - Casing and production pipes made of steel for boreholes 

TS EN 12583 Gas supply systems - Compressor stations - Functional rules 

TS EN ISO 15971 Natural gas - Measurement of properties - Thermal value and Wobbe index 

TS EN 590 / AC Automotive fuels - Diesel (diesel) - Requirements and test methods

TS EN 13924-2 Bitumen and bituminous binders - Specification frame for special coating bitumen - Multi-quality flooring bitumen 

TS EN 16214-1 Sustainability criteria for biofuels and biolic products for energy applications - Principles, criteria, indicators and validators - Part 1: Terminology 

TSE K 234 Synthetic Raw Biopoil-Hydrothermal Liquefaction Method 

tkt 201497116 Bituminous water-based waterproof elastic coating material  

EN ISO 5164: 2014 Petroleum products-Automotive fuels-Determination of knock characteristics-Research method  

EN ISO 5163: 2014 Petroleum products-Automotive and aerospace fuels-Determination of knock characteristics-Engine method  

TS 5442 Determination of thermal stability of hydraulic oils 

TS EN ISO 15136-2 Oil and gas industry - Well equipment - Gradual hollow pump systems used in production - Part 2: Surface driven systems 

TS ISO 3733 Petroleum Products and Bituminous Materials-Water Determination-Distillation Method 

TS 5452 Lubricating oils, industrial oils and related products (Class L) - Engine oils (Group E) - Used in gasoline and diesel marine engines 

TS 10695 Lubricating oils, industrial oils and related products (Class L) - Compressor oils (Group D) - Used in refrigeration compressors 

Safety regulations for household and similar electrical appliances - Part 60335-2: Particular requirements for roasters, grills and similar portable cooking appliances 

TS 11795 / T2 Lubricating oils, industrial lubricants and related products (Class L) - Miscellaneous lubricants (Group Y) - Used in tractors and heavy machinery 

TS ISO 8217 Petroleum products - Fuels (Class F) - Marine fuels - Specifications 

ISO 6974-5: 2014 Natural gas- Determination of composition and associated uncertainty by gas chromatography- Part 5  

EN 16476: 2014 Liquid petroleum products - Diesel fuels - Determination of sodium, potassium, calcium, phosphorus, copper and zinc contents - Inductively coupled plasma optical emission  

EN 1601: 2014 Liquid petroleum products-Lead-free gasoline-Gas Chromatography (O-FID) for determination of oxygenated compounds and organically bound total oxygen content  

EN ISO 17824: 2014 Oil and gas industries - Well equipment - Sand screens  

TS 13612 / T1 Compressed natural gas (CNG) - Supply stations - For road vehicles - Safety regulations 

TS EN ISO 17225-1 Solid biofuels - Fuel specifications and classes - Part 1: General specifications 

TS EN ISO 17225-2 Solid biofuels - Fuel properties and classes - Part 2: Classified wood pellets 

TS EN ISO 17225-3 Solid biofuels - Fuel specifications and classes - Part 3: Classified wood briquettes 

TS EN ISO 17225-4 Solid biofuels - Fuel specifications and classes - Part 4: Classified wood chips 

TS EN ISO 17225-5 Solid biofuels - Fuel specifications and classes - Part 5: Classified firewood 

TS EN ISO 17225-6 Solid biofuels - Fuel properties and classes - Part 6: Non-wood pellets classified 

TS EN ISO 17225-7 Solid biofuels - Fuel properties and classes - Part 7: Non-wood briquettes classified 

TS EN ISO 16559 Solid biofuels - Terms, descriptions and explanations 

TS 10572 Determination of peat-fiber ratio and botanical composition  

TS EN 1601 Liquid petroleum products - Unleaded gasoline - Determination of oxygenated compounds and organically bound total oxygen content by Gas Chromatography (O-FID) 

TS EN ISO 27627 Oil and gas industries - Measurement of aluminum alloy drill pipe connection threads 

TS EN ISO 13354 Oil and gas industries - Drilling and production equipment - Gas deflecting equipment for shallow gas deposits 

TS EN 14078 Liquid petroleum products - Medium distillation products - Determination of fatty acid methyl esters (FAME) content - Infrared spectrometry method 

TS EN 16476 Liquid petroleum products - Diesel fuels - Determination of sodium, potassium, calcium, phosphorus, copper and zinc contents - Inductively coupled plasma optical emission spectrometry (ICP-OES) method 

TS EN ISO 5163 Petroleum products - Automotive and aerospace fuels - Determination of knock characteristics - Engine method 

TS EN ISO 5164 Petroleum products - Automotive fuels - Determination of knock characteristics - Research method 

TS EN ISO 6974-5 Natural gas - Determination of the composition and the associated uncertainty by gas chromatography - Part 5: Isothermal method for hydrocarbons of carbon from 1 to 5 with carbon and more than 6 with nitrogen and carbon dioxide 

TS EN ISO 17824 Oil and gas industries - Well equipment - Sand sieves 

TS EN ISO 6808 Plastic hoses and hose assemblies - Used for suction and discharge at low pressure - For petroleum based liquids - Specifications 

TS EN 12597 Bitumen and bituminous binders - Terms and definitions 

TS EN 1601: 2014 / AC Liquid petroleum products - Lead-free gasoline - Determination of oxygenated compounds and organically bound total oxygen content by Gas Chromatography (O-FID) 

TS EN 14678-1: 2013 LPG equipment and accessories - Construction and performance of LPG equipment for vehicle filling stations - Part 1: Dispensers 

TS EN 1601 / AC Liquid petroleum products - Unleaded gasoline - Determination of oxygenated compounds and organically bound total oxygen content by gas chromatography (O-FID)

TS EN 12186 Gas supply systems - Gas pressure regulating stations - For transmission and distribution - Functional requirements 

TS 13667 Lubricating oils - Determination of oil-water interface tension - Ring method 

TS EN 14214: 2012 + A1: 2014 / AC Liquid petroleum products - Fatty acid methyl esters (YAME / biodiesel) - Used in diesel engines and heating applications - Specifications and test methods 

TSE CEN / EN 15367-1 Petroleum products - Guidelines for the prevention of contamination during production, supply and distribution - Part 1: Diesel automotive fuels 

TSE CEN / EN 15367-1 Petroleum products - Guidelines for the prevention of contamination during production, supply and distribution - Part 1: Diesel automotive fuels 

TS EN 15376 Automotive fuels - Ethanol - used as a blending component in gasoline - Requirements and test methods 

TS ISO 16960 Natural gas - Total sulfur determination - Oxidative microculometer method 

TS ISO 19378 Lubricating Oils, Industrial Oils and Related Products (Class L) - Used in Machine Tools - Groups and specifications 

TS EN 1594 Gas systems - For pipelines with the highest operating pressure above 16 bar - Functional specifications 

TS ISO 26422 Petroleum and related products-Determination of shear stability of lubricating oils containing polymers-Tapered roller bearing method 

TS 12330 / T4 Lubricating oils, industrial oils and related products (Class L) - Group E: Engine oils - Used in gasoline and diesel engines 

EN 12592: 2014 Bitumen and bituminous binders - Determination of solubility  

EN 12596: 2014 Bitumens and bituminous binders-Kinematic viscosity determination -Vacuum capillary method  

EN 12595: 2014 Bitumen and bituminous binders-Kinematic viscosity determination  

ISO 17197: 2014 Dimethyl ether (DME) for fuels-Determination of water content-Karl Fischer titration method  

TS 11997 / T1 Lubricating oils, industrial lubricants and related products (class l) - Lubricating oils - Used in compressed air devices (group p) 

TS EN 14214: 2012 + A1: 2014 / AC Liquid petroleum products - Fatty acid methyl esters (YAME / biodiesel) - Used in diesel engines and heating applications - Specifications and test methods 

TS EN 12081 + A1: 2010 Railway applications - Axle boxes - Lubricating greases  

tst EN ISO 15761 Sliding, ball and check valves for the oil and gas industry  

TS EN 14865-1 + A1 Railway applications - Axle box lubricating greases - Part 1: Lubrication adequacy test method 

TS EN 14865-2 + A2 Railway applications - Axle box lubricating greases - Part 2: 200 method of testing mechanical stability up to vehicle speed km / h  

TS 4701 Screw threads - For pipeline systems for the transport and distribution of petroleum and petroleum products and natural gas 

TS ISO 19378 Lubricating oils, industrial oils and related products (Class L) - Used in machine tools - Groups and specifications 

TS EN ISO 20846 Petroleum products - Automotive fuels - Determination of sulfur content - Ultraviolet fluorescence method 

TS EN 12662 Liquid petroleum products - Medium distillation products, diesel fuels and fatty acid methyl esters - Determination of total pollution

TS EN ISO 20763 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Crawler pump method 

TS EN ISO 20764 Petroleum and related products - Preparation of test sample for determination of water content in high boiling liquids - Nitrogen sweep method 

TS ISO 26422 Petroleum and related products - Determination of shear stability of polymeric lubricating oils - Tapered roller bearing method 

TS EN 16576 Automotive Fuels - Determination of Manganese and Iron Content in Diesel Fuels - Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) Method 

TSE K 320 Cartridge Steel Natural Gas Filter (With Flash and Openable Cover) 

TS 5834 Gas pressure regulation rules for natural gas pipelines  

TS 13484 / T3 Lubricating oils, industrial oils and related products (Class L) - Heat transfer oils (Group Q) 

TS 11795 / T3 Lubricating oils, industrial lubricants and related products (Class L) - Miscellaneous lubricants (Group Y) - Used in tractors and heavy machinery 

EN 16136: 2015 Automotive Fuels - Benzine - Determination of manganese and iron in unleaded gasoline - ICP OES method  

TS EN 16136 Determination of Manganese and Iron Content in Automotive Fuel-Unleaded Gas-Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) Method  

TS 5772 Aircraft Turbine Fuels - Undissolved Water Determination 

TS EN ISO 11960 Oil and gas industries - Casing and production pipes made of steel for boreholes

TS EN ISO 10370 Petroleum products - Determination of carbon residue - Micro method

TS EN 15195 Petroleum products - Medium distillation fuels - Determination of ignition delay and derived cetane number (DCN) - Combustion method in constant volume chamber 

TS EN ISO 12736 Oil and gas industries - Wet thermal insulation coatings for pipelines, drilling fluid lines and marine structures 

TS EN 16568 Automotive fuels - Blends of diesel fuel and fatty acid methyl esters (YAME) - Determination of oxidation stability by accelerated oxidation at 120 ° C 

TSE CEN / TR 15149-3 Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method 

TS 9188 Hydraulic fluids (used for military purposes) - Oil based - H-515 hydraulic fluid used in aviation - Specifications 

TS 10177 Turbine fuels (used for military purposes) - Aviation F-34 fuel (JP-8) - Specifications 

TS 5996 Diesel fuels (Military) - F-76 fuel used in marine vehicles - Specifications 

TS 4940 Turbine fuels (used for military purposes) - Aviation F-40 fuel (JP-4) - Specifications 

TS 9910 Turbine fuels (used for military purposes) - Aviation F-44 fuel (JP-5) - Specifications 

TSE K 343 Jute Oil 

TS 1445 Liquefied Petroleum Gases (LPG) - Transport Rules

TS EN ISO 12736 Oil and gas industries - Wet thermal insulation coatings for pipelines, drilling fluid lines and marine structures  

TS ISO 11158 / D1 Lubricating oils, industrial oils and related products (Class L) - Group H (for hydraulic systems) - Types HH, HL, HM, HV and HG - Specifications 

TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications 

TS EN ISO 19901-3 Oil and gas industries - Characteristics of offshore structures - Part 3: On-platform structures (ISO 19901-3: 2014) 

TS ISO 12176-2 Plastic pipes and fittings - Equipment for fused polyethylene systems - Part 2: Electric fusion welding 

TS ISO 12176-1 Plastic pipes and fittings - Equipment for melting polyethylene systems - Part 1: Butt welding 

tst ISO 12176-1 Plastic pipes and fittings - Equipment for polyethylene systems with fusion connection - Part 1: Butt welding  

TS ISO 12176-3 Plastic pipes and fittings - Equipment for polyethylene systems with melting connection - Part 3: Operator identification 

TS ISO 12176-4 Plastic pipes and fittings - Equipment for polyethylene systems with melting connection - Part 4: Conformity coding 

TS 12820 / T4 Gas stations - Safety requirements 

TS EN 14077 Petroleum products - Determination of organic halogen content - Oxidative microculometry method 

TS EN ISO 4263-2 Petroleum and related products - Determination of the aging behavior of preventive oils and fluids - TOST test - Part 2: Process for HFC type hydraulic fluids (ISO 4263-2: 2003) 

tst EN ISO 4263-3 Petroleum and related products - Additive mineral oils and fluids - Determination of aging behavior - Toast test - Part 3: Non-aqueous method for artificial hydraulic fluids  

TS EN ISO 20823 Petroleum and related products - Determination of flammability properties of fluids in contact with hot surfaces - Ignition test in manifold (ISO 20823: 2003) 

TS EN ISO 13734 Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods 

TS EN ISO 10426-1 / AC Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications - Technical correction 1 

TS EN 1473 Installations and equipment for liquefied natural gas - Design of onshore installations 

TS EN ISO 20846 Petroleum products - Automotive fuels - Determination of sulfur content - Ultraviolet fluorescence method 

TS EN 15234-1 Solid biofuels - Fuel quality assurance - Part 1: General specifications 

TS EN 15234-2 Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use 

TS EN 15234-3 Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use 

TS EN 15234-4 Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use 

TS EN 15234-5 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use 

TS EN 15234-6 Solid biofuels - Fuel quality assurance - Part 6: Non-wood pellets for non-industrial use 

tst EN ISO 17225-1 Solid biofuels - Fuel specifications and classes - Part 1: General specifications  

tst EN ISO 17225-2 Solid biofuels - Fuel properties and classes - Part 2: Classified wood pellets  

tst EN ISO 17225-3 Solid biofuels - Fuel properties and classes - Part 3: Classified wood briquettes  

tst EN ISO 17225-4 Solid biofuels - Fuel specifications and classes - Part 4: Classified wood chips  

tst EN ISO 17225-5 Solid biofuels - Fuel properties and classes - Part 5: Classified firewood  

tst EN ISO 17225-6 Solid biofuels - Fuel properties and classes - Part 6: Classified non-wood pellets  

tst EN ISO 17225-7 Solid biofuels - Fuel properties and classes - Part 7: Non-wood briquettes classified  

tst EN 15210-1 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 1: Pellets  

tst EN 15210-2 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 2: Briquettes  

tst EN 16126 Solid biofuels - Determination of particle size distribution of dispersed pellets  

tst EN 16127 Solid biofuels - Determination of length and diameter of pellets  

TS EN 12597 Bitumen and bituminous binders - Terms and definitions 

TS EN ISO 21809-2 Oil and gas industries - External coatings for buried or submerged pipelines for pipeline transport systems

TS EN 12596 Bitumen and bituminous binders - Determination of kinematic viscosity - Vacuum capillary extraction method 

TS EN 12592 Bitumen and bituminous binders - Determination of solubility 

TS EN 12594 Bitumen and bituminous binders - Preparation of test specimens 

TS EN 12595 Bitumen and bituminous binders - Determination of kinematic viscosity 

TS EN 12607-1 Bitumen and bituminous binders - Determination of hardening resistance under the influence of heat and air - Part 1: RTFOT method

TS EN 12607-2 Bitumen and bituminous binders - Determination of hardening resistance under the influence of heat and air - Part 2: TFOT method 

TS EN 12607-3 Bitumen and bituminous binders - Determination of curing resistance under the influence of heat and air - Part 3: RTF method 

tst EN 14774-1 Solid biofuels - Determination of moisture content - Drying method in the oven - Part 1: Total moisture - Reference method  

tst EN 14774-2 Solid biofuels - Determination of moisture content - Drying method in the oven - Part 2: Total moisture - Simple method  

tst EN 14774-3 Solid biofuels-Determination of moisture content - Drying method in the oven - Part 3: Moisture in general analysis samples  

tst EN 14775 Solid biofuels - Determination of ash content  

tst EN 14778 Solid biofuels - Sampling  

tst EN 14780 Solid biofuels - Sample preparation  

tst EN 14918 Solid biofuels - Determination of thermal value  

tst EN 15103 Solid biofuels - Determination of bulk density  

tst EN 15104 Solid biofuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental methods  

tst EN 15148 Solid biofuels - Determination of volatile content

tst EN 15150 Solid biofuels - Determination of grain density  

TS ISO 8217 / D1 Petroleum products - Fuels (Class F) - Marine fuels - Specifications 

TS EN 14078 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in medium distillation products - Infrared spectrometry method 

TS EN 14274 Automotive fuels - Gas and diesel fuel quality assessment - Fuel quality monitoring system (YKIS) 

TS EN 14274 / AC Automotive fuels - Assessment of the quality of gasoline and diesel fuel - Fuel quality monitoring system (YKIS) 

TS EN 15779 + A1 Petroleum products and fat and oil derivatives - Fatty acid methyl esters (YAME) for diesel engines - Analysis of polyunsaturated (? 4 double bonded) fatty acid (CFA) methyl esters by gas chromatography 

TSE K 422 Expansion Joints - With rubber bellows - Used outside of gas pipelines and installations (for water, steam, oil) 

TS EN ISO 15589-2 Oil, petrochemical and natural gas industries - Cathodic protection of pipeline transport systems - Part 2: Offshore pipelines  

TS EN ISO 16995 Solid biofuels - Determination of water-soluble chloride, sodium and potassium content 

ISO / TR 16922: 2013 Natural gas - Scenting

TS EN 1108 Flexible sheets for waterproofing - Bituminous sheets for waterproofing on roofs - Determination of shape stability under the influence of temperature cycling 

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expanding compressors - Part 10439: General specifications 

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expanding compressors - Part 10439: Non-integrated geared centrifugal and axial compressors 

Oil, petrochemical and natural gas industries - Axial and centrifugal compressors and expanding compressors - Part 10439: Integrated gear centrifugal compressors 

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expanding compressors - Part 10439: Extensible compressors 

TS EN 16136 Determination of Manganese and Iron Content in Automotive Fuel-Unleaded Gas-Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) Method 

TS EN ISO 3679 Determination of flash and non-flash point - Fast equilibrium closed cup method 

tst EN ISO 16995 Solid biofuels - Determination of water-soluble chloride, sodium and potassium content  

tkt 2015102369 AL TRUCK MOUNTED ALUMINUM TANK BODY 20000lt. TANK FILLING CAPACITY AIRCRAFT FUEL SUPPLY TANKERS BMC 827 (6X4) MODEL ”  

TS EN 12186 Gas supply systems - Gas pressure regulating stations - For transmission and distribution - Functional requirements  

TS EN 12583 Gas supply systems - Compressor stations - Functional rules  

TS EN 14141 Valves for the transport of natural gas in pipelines - performance characteristics and tests  

ISO 17786: 2015 Dimethyl ether for fuels - Determination of evaporation residues - Mass analysis method

TS ISO 10976 Refrigerated light hydrocarbon fluids - Measurement of carrier loads in LNG carriers 

TS ISO 687 Solid mineral fuels - Coke - Determination of humidity in general analysis test sample 

TS EN ISO 17292 Oil, petrochemical and related industries-Metal ball valves  

TS EN ISO 12759 Fan - Efficiency classification for fans 

TS EN ISO 12759 Fan - Efficiency classification for fans 

TS EN ISO 16903 Oil and gas industry - LNG's characteristics, design influences and material selection (ISO 16903: 2015) 

TS EN 13782 Temporary structures - Awnings - Safety 

TS EN 14161 + A1 Oil and gas industries - Pipeline transport systems (ISO 13623: modified from 2009) 

TS EN 16270 Automotive fuels - Determination of high boiling components - Including methyl esters of fatty acids in petroleum and ethanol (E85) as automotive fuel - Gas chromatography method

TS EN ISO 15551-1 Oil and gas industries - Drilling and production equipment - Part 1: Submersible electric pump systems for artificial lifts 

TSE CEN / TR 15745 Liquid petroleum products - Determination of hydrocarbon types and oxygenated compounds by multidimensional gas chromatography - Interlaboratory comparison research report 

TS EN ISO 17945 Petroleum, petrochemical and natural gas industries - Metallic materials resistant to cracking of sulfur stress in corrosive petroleum refining environments 

TS EN 116 Diesel fuels and domestic heating fuels - Determination of cold filter plugging point - Gradual cooling bath method 

TS EN ISO 6743-4 Lubricating oils, industrial oils and related products (class L) - Classification - Part 4: Type H (hydraulic systems) 

TS EN ISO 13702 Oil and gas industry - Control and prevention of fire and explosion in offshore systems - Requirements and rules 

TS EN 16715 Liquid petroleum products - Determination of ignition delay and derived cetane number (TSS) of medium distillate fuels - Determination of ignition and combustion delay using a fixed volume combustion chamber with direct fuel injection 

TS EN ISO 24817 Petroleum, petrochemical and natural gas industries - Composite repair for pipe manufacturing - Qualification, assembly, testing and inspection 

TS EN ISO 16961 Petroleum, petrochemical and natural gas industries - Coating and lining the inner surface of steel storage tanks 

TS EN ISO 16967 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti

TS EN 16507 Railway applications - Ground handling - Diesel filling equipment

TS EN ISO 16948 Solid biofuels - Determination of total carbon, hydrogen and nitrogen content 

TS EN ISO 16968 Solid biofuels - Determination of trace elements 

TS EN 1426 Bitumen and bituminous binders - Determination of needle penetration depth 

TS EN 1427 Bitumen and bituminous binders - Determination of softening point - Ring and ball method 

TS EN 12606-1 Bitumen and bituminous binders-Determination of paraffin wax content-Part 1: Distillation method 

TS EN 12593 Bitumen and bituminous binders - Fraas break / break point determination 

TS 12820 / T5 Gas stations - Safety requirements 

TS 13707 Natural Gas and Gas Fuels-Determination of Sulfur Compounds-Gas Chromatography and Chemiluminescence Method 

TS 13688 Liquefied petroleum gases (LPG) - Determination of ethyl mercaptan in vapor phase 

TS 13369 / T3 Lubricating Oils, Industrial Oils and Related Products (Class L) - Base Oils

TS 13772 Liquefied natural gas (lng) - Stations - Road vehicles 

TS EN 14833 Petroleum and related products - Determination of hydrolytic stability of refractory phosphate ester fluids 

TSE K 504 Aluminum rolling and processing oils 

tst 12820 Gas stations - Safety requirements  

TS EN 590 / AC Automotive fuels - Diesel (diesel) - Requirements and test methods 

TS ISO 17885 Plastic pipe systems - Mechanical fittings for pressure pipes - Specifications 

tst 2015102589 Lubricating oils, industrial oils and related products (class L) - Miscellaneous lubricants (Group Y) - White oils  

TS ISO 17885 Plastic pipe systems - Mechanical fittings for pressure pipe systems - Specifications 

TS ISO 6974-1 / Cor 1 Natural gas - gas chromatography - Part 1 composition and determination of the associated uncertainty: General rules and composition calculation  

TS 12664-2 Business - Rules for the conversion of road vehicles fuel systems for the use of compressed natural gas (CNG) and liquefied natural gas (LNG) 

TS EN ISO 18122 Solid biofuels - Determination of ash content 

TS EN ISO 17831-2 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 1: Briquettes 

TS EN ISO 17831-1 Solid biofuels - Determination of mechanical strength of pellets and briquettes - Part 1: Pellets 

tst EN 15290 Solid biofuels - Determination of main elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti  

tst EN 15296 Solid biofuels - Conversion of analytical results from one base to another  

tst EN 15297 Solid biofuels - Determination of trace elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn  

TS EN ISO 20844 Petroleum and related products - Determination of slip stability of polymer-containing oils by diesel injector nozzle 

TS 11796 / T1 Lubricating oils, industrial oils and related products (Class L) - Compressor oils (Group D) - Used in air and gas compressors and vacuum pumps 

TS EN ISO 19901-1 Oil and gas industry-Special requirements for offshore structures-Part 1: Design and operation of methoshine (ocean meteorology) 

TS EN 16709 Automotive fuels - Diesel fuel with high YAME content (B20 and B30) - Requirements and test methods 

TS EN ISO 19901-8 Oil and gas industries - Special requirements for offshore structures - Part 8: Marine soil surveys 

TS EN ISO 17829 Solid biofuels - Determination of diameter and length of pellets 

TSE ISO / TR 16922 Natural gas - Scenting

Solid biofuels - Determination of moisture content - Method of drying in the oven - Part 18134: Moisture in the general analysis sample TS EN ISO 3-3 

TS EN ISO 18123 Solid biofuels - Determination of volatile matter content 

TS EN ISO 17828 Solid biofuels - Determination of bulk density 

TS EN ISO 17348 Oil and gas industries - Selection of materials for enclosures, pipes and wells in high CO2 environments 

TS EN ISO 17349 Oil and gas industries - Handling high CO2 streams at high pressure on offshore platforms 

TS EN 16761-1 Automotive fuels - Determination of methanol in automotive fuel ethanol (E85) by gas chromatography - Part 1: Method using single column technique 

TS EN 16761-2 Automotive fuels - Determination of methanol in automotive fuel ethanol (E85) by gas chromatography - Part 2: Method using selective separation (two columns) technique 

TSE CEN ISO / TS 16530-2 Well integrity - Part 2: Well integrity for operation 

TS EN ISO 19905-1 Petroleum and petroleum products - Stations - Special appraisal of mobile offshore structures - Part 1: Jack-ups 

TS EN ISO 15156-1 Oil and gas industries - Materials used in H2S-containing environments in oil and gas production - Part 1: General principles for the selection of crack-resistant materials 

TS EN ISO 15156-2 Oil and gas industries - Materials used in environments containing H2S in oil and gas production - Part 2: Use of crack-resistant carbon steel and low alloy steels and cast iron 

TS EN ISO 15156-3 Oil and gas industries - Materials used in environments containing H2S in oil and gas production - Part 3: Crack-resistant corrosion-resistant alloys and other alloys 

TS ISO 334 Solid mineral fuels - Determination of total sulfur - Eschka method 

TS EN 15199-4 Petroleum products - Determination of boiling range distribution by gas chromatography - Part 4: Light parts of crude oil 

TSE CEN / TR 16885 Liquid petroleum products - Investigation of test method for measuring oxidation stability of diesel fuel and diesel fuel / YAME blends with acid number after aging 

TS EN 1776 Gas infrastructure - Gas measuring systems - Functional requirements 

TS EN 16726 Gas infrastructure - Gas quality - Group H 

TS EN ISO 4263-3 Petroleum and related products - Additive mineral oils and fluids - Determination of aging behavior - Toast test - Part 3: Non-aqueous method for artificial hydraulic fluids 

TS EN 12916 Petroleum products - Medium distillation products - Determination of hydrocarbon species - High performance liquid chromatography method based on refractive index determination 

TS 12153 / T3 Lubricating oils, industrial oils and related products (Class L) - Mold oils (Group B) 

TS EN 16659 Bitumen and bituminous binders-Multiple creep stress and recovery test (MSCRT) 

TSE K 320 / T1 Cartridge Steel Natural Gas Filter (With Flash and Openable Cover) 

TS 1449 / T1 Lpg loading and unloading rules - Safety requirements 

TS EN 1918-1 Gas supply systems - Underground gas storage - Part 1: Functional requirements for gas storage in aquifers 

TS EN 1918-2 Gas supply systems - Underground gas storage - Part 2: Functional requirements for gas storage in oil and gas reservoirs 

TS EN 1918-3 Gas supply systems - Underground gas storage Section 3: Functional requirements for storage in cavities formed by dissolving in salt deposits 

TS EN 1918-4 Gas supply systems - Underground gas storage Section 4: Functional rules for gas storage in underground cavities 

TS EN 1918-5 Gas supply systems - Underground gas storage - Part 5: Functional requirements for surface installations 

TS EN ISO 12156-1 Diesel fuels- High frequency forward-reverse lubrication (HFFR) evaluation of lubrication - Part 1: Test method 

TS EN ISO 19901-5 Oil and gas industry -Features for offshore structures - Part 5: Mass control during engineering and construction 

TS EN ISO 22854 Petroleum products - Determination of hydrocarbon types and oxygenated compounds in automotive engine gasoline and automotive fuel ethanol (E85) - Multidimensional gas chromatography method 

TS EN ISO 21809-3 Oil and gas industries - Exterior coatings for buried or immersed pipes used in pipeline transmission systems - part 3: field joint coatings 

TS EN ISO 16904 Oil and gas industries - Conventional land terminals for LNG marine transfer arms Design and testing 

Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 17827: Vibrating sieving method using sieves with mm or smaller mesh 

Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 17827: Oscillating sieving method using mesh screens of mm and larger 

TS EN ISO 17830 Solid biofuels - Determination of particle size distribution of shredded pellets 

TS EN 13616-1 Overfill prevention devices for stationary tanks for liquid fuel - Part 1: overfill prevention devices with shut-off device 

TS EN 13616-2 Overfill prevention devices for liquid fuel stationary tanks - Part 2: Overfill prevention without a shut-off device 

TS EN 15940 Automotive fuels-Paraffinic diesel fuel obtained by synthesis or hydrogen treatment-Features and test methods 

TS EN 16709 / AC Automotive fuels - Diesel fuel with high YAME content (B20 and B30) - Requirements and test methods 

TS EN ISO 2719 Flash point determination-Pensky martens closed cup method 

TS EN ISO 2719 Flash point determination-Pensky martens closed cup method 

TS EN ISO 6976 Calculation of natural gas-heat values, density, relative density and wobbe index from gas composition 

TS EN 1765 Rubber hose sets - For filling and emptying fuel - Features of hose sets 

tst 2016113801 Lubricating oils, industrial oils and related products (Class L) - Compressor oils (Group D) - Used in air and gas compressors and vacuum pumps  

TS 11796 / T2 Lubricating oils, industrial oils and related products (Class L) - Compressor oils (Group D) - Used in air and gas compressors and vacuum pumps 

TS EN ISO 16994 Solid biofuels - Determination of total sulfur and chloride content 

TS EN ISO 18846 Solid biofuels - Determination of fine grain content in pellets 

TS EN ISO 18847 Solid biofuels - Determination of grain density of pellets and briquettes

TS ISO 579 Coal-Total moisture determination 

TS 11485 Lubricating oils, industrial oils and related products (Class L) - Group G: Gear oils - Used in motor vehicles 

TS EN ISO 3924 Petroleum products - Determination of boiling range distribution - Gas chromatography method 

TS EN 1765 Rubber hose sets - For filling and emptying fuel - Features of hose sets  

TS EN 13075-1 Bitumen and bituminous binders - Determination of fracture behavior - Part 1: Determination of fracture value of cationic bitumen emulsions by mineral filler method 

TS EN 13075-2 Bitumen and bituminous binders - Determination of fracture behavior - Part 2: Determination of the mixing time of cationic bitumen emulsions with fine mineral substances 

TS EN 16849 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Dry balance method 

TS EN 13587 Bitumen and bituminous binders - Determination of tensile properties of bituminous binders by tensile test method 

TS 13776 Floating plastic feet for indoor and outdoor use 

TS EN 16807 Liquid petroleum products - Bio lubricants - Criteria and requirements for bio lubricants and biological lubricants 

TS EN 16896 Petroleum products and related products - Determination of kinematic viscosity - Stabinger type viscometer method 

TS EN ISO 14224 Oil, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment 

TS EN ISO 14224 Oil, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment 

TS EN ISO 16440 Oil and gas industries - Pipeline transport systems - Design, construction and maintenance of steel jacketed pipelines 

tst 12154 Lubricating oils-Used in textile machinery  

TS ISO 6978-2 / AC Natural gas - Determination of mercury - Part 2: Mercury sampling by amalgamation on gold / platinum alloy - Technical Fix 2 

TS EN ISO 17292 Metal and ball valves for petroleum and petrochemical industries and related industries (ISO 17292: 2015) 

TS EN 12916 Petroleum products - Medium distillation products - Determination of hydrocarbon species - High performance liquid chromatography method based on refractive index determination  

TS EN 12916 Petroleum products - Medium distillation products - Determination of hydrocarbon species - High performance liquid chromatography method based on refractive index determination  

TS EN ISO 12156-1 Diesel fuels- High frequency forward-reverse lubrication (HFFR) evaluation of lubrication - Part 1: Test method  

TS EN ISO 2719 Flash point determination-Pensky martens closed cup method  

TS EN ISO 2719 Flash point determination-Pensky martens closed cup method  

TS 13612 Compressed natural gas (CNG) - Refueling stations - For road vehicles - Safety regulations  

tst 2017114885 Pyrolytic gas fuel - obtained by pyrolysis of used rubber and plastics  

tst 13425 Lubricating oils, industrial oils and related products (class L) - group G: Slideway oils  

2017114890 Cartridge Steel Natural Gas Filter (With Flash and Openable Cover)  

tst 2017116014 Pyrolytic liquid fuel - obtained by pyrolysis of used rubber and plastics  

TS EN ISO 17776 Oil and gas industry - Offshore production systems - Guidance for devices and techniques for hazard detection and risk assessment 

TS EN ISO 19901-4 Oil and gas industry - Properties for offshore structures - Part 4: Considerations in geotechnical and foundation designs 

Solid biofuels - Determination of moisture content - Drying method in the oven - Part 18134: Total moisture - Simplified method (EN ISO 2-2: 18134) TS EN ISO 2-2017 

TS EN 16734 Automotive fuels - Automotive B10 diesel fuel - Specifications and test methods 

TS EN ISO 16960 Natural gas - Determination of sulfur content - Determination of total sulfur by oxidative microcoulometry 

TS EN ISO 14532 Natural gas-Dictionary 

TS EN ISO 20519 Vessels and marine technology - Specification for fuel tank bunker of fueled vessels operating liquefied natural gas 

TS EN 16900 Biofuels produced by rapid pyrolysis for industrial boilers - Requirements and test methods 

TS ISO 16530-1 Oil and gas industries - Well integrity - Part 1: Life cycle management 

TS EN 16942 Fuels - Determination of vehicle compatibility - Graphical presentation for consumer information 

TS EN 16942 Fuels - Determination of vehicle compatibility - Graphical presentation for consumer information  

tst EN 15289 Solid biofuels - Determination of total sulfur and chloride content  

TS 11485 / T1 Lubricating oils, industrial oils and related products (Class L) - Group C: Gear oils - used in motor vehicles 

TS ISO 15589-1 Oil, petrochemical and natural gas industries - Cathodic protection of pipeline transport systems - Part 1: Pipelines on land 

TS ISO 13707 Oil and gas industry - Reciprocating compressors 

TSN ISO / TR 15403-2 Natural gas - Natural gas used as compressed fuel in vehicles - Part 2: Quality characteristics 

TSE K 146 Lubricating oils, industrial oils and related products (class l) - group y: Gas washing oils - used for the removal of hydrocarbons from coke gas  

TS EN ISO 20623 Petroleum and related products - Determination of overpressure and anti-wear properties of fluids - Four ball methods (European conditions) 

TS 135 Method for testing inorganic matter or ash 

TS 136 Method for softening point testing of tar products 

TS 137 Method for testing mastic asphalt, bituminous mortars and similar mixtures 

2009 / 142 / EC November 2009 directive of the European Parliament and of the Council on gas appliances  

TS EN 15402: 2011 Solid fuels - Determination of recovered volatile matter content 

tst 5371 Motor oils - Viscosity classification of automotive gear oils and consistency classification of lubricating greases  

TS EN 15407: 2011 Solid fuels - Recycled - Determination of carbon (c), hydrogen (h) and nitrogen (n) content

TS 646 ISO 625 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method 

TS 646 ISO 625 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method 

TS 651 ISO 601 Solid mineral fuels - Determination of arsenic content - Silver by using the diethyl methylarylbarbamate photometric method according to Ts 1463 (iso 2590) 

TS 652 ISO 609 Solid fossil fuels - Determination of carbon and hydrogen - High temperature combustion method 

TS 652 ISO 609 / T1 Solid fossil fuels - Determination of carbon and hydrogen - High temperature combustion method 

tst 200766841 Industrial fuel-recovered from oil sludge

TS 711 ISO 562 Coal and coke - Determination of volatile substances 

TS EN 720-1 Tubes - Portable - Gases and gas mixtures - Part 1: Properties of pure gases 

TS 900-2 EN ISO 3171 (Formerly: TS 900-2 ISO 3171) Petroleum liquids-Automatic sampling from the pipeline 

TS 900-2 ISO 3171: 1999 / T1 (Number modification, TS 900-2 EN ISO 3171) Petroleum liquids - Automatic sampling from the pipeline 

tst 201185516 Polymer-containing fluids-Determination of shear stability-Using diesel injector tester  

TS ISO 1013 Coke - Determination of bulk density in a large container

TS ISO 1998-99 Petroleum industry - Terms and recipes - part 99: General and index 

TS ISO 1998-1 Petroleum industry - Terms and definitions - Section 1: Raw materials and products 

TS ISO 1998-2 Petroleum industry - Terms and recipes - Part 2: Features and experiments 

TS ISO 1998-3 Petroleum industry - Terms and recipes - Part 3: Exploration and production 

TS ISO 1998-4 Oil industry - Terms and recipes - Part 4: Distillation 

TS ISO 1998-5 Oil industry - Terms and recipes -Part 5: Transport, storage, distribution

TS 2322 Analysis methods of lubricating greases 

TS 2322 Analysis methods of lubricating greases  

TS ISO 2325 Coke - Grain size analysis (nominal top grain size 20 mm or less) 

TS 2389 Natural gas analysis (volumetric method) 

TS 2432 EN 12634 Petroleum products and lubricants - Determination of acid number - Potentiometric titration method in anhydrous medium

TS ISO 3839 Petroleum products-Determination of bromine number of distillates and aliphatic olefins-Electrometric method 

TS ISO 3871 Road vehicles - Marking of oil-based or non-oil-based brake fluid containers 

TS 3919 Test rules for the testing and acceptance of coke-screening plants 

TS 13454 Petroleum products - Aircraft turbine fuels - Determination of decomposition properties from water - Portable separator method 

TS EN ISO 3977-5 Gas turbines - Supply - Section 5: Applications in the oil and gas industry 

TS EN ISO 3977-5 Gas turbines - Supply - Section 5: Applications in the oil and gas industry 

TS EN ISO 3977-5 / AC Gas turbines - Supply - Section 5: Applications in the oil and gas industry 

TS 4068 Gasoline - Determination of benzene and toluene - Gas chromatographic method 

TS ISO 4124 Liquid hydrocarbons - Dynamic measurement methods - Statistical control of volume measurement systems 

TS 4196 ISO 2207 Oil waxes - Determination of pour point 

TS 4197 Drilling sludge additives - Thinners (cluster solvents) 

TS EN ISO 4259 Petroleum products - Determination and use of precision data on test methods 

TS EN ISO 4263-4 Petroleum and related products - Additive mineral oils and fluids - Determination of aging behavior - Toast test - Part 4: For industrial gear oils

TS 2741 EN ISO 2160 Petroleum products - Copper corrosion - Copper strip method 

TS 2752 Oil-based hydraulic fluid (for military purposes) 

tst EN ISO 2789 Information and documentation - International library statistics  

TS 2811 Determination of the number of luminometers in jet fuels 

TS 2865 Determination of total sulfur in gas fuels

tst EN ISO 4263-2 Petroleum and related products - Determination of the aging behavior of doped mineral oils and fluids - Toast test - Part 2: Process for Hfc type hydraulic fluids  

TS EN ISO 4263-1 Petroleum and related products - Determination of the aging behavior of preventive oils and liquids - Toast test - Part 1: Process for mineral oils 

TS EN ISO 4263-1 Petroleum and related products - Determination of the aging behavior of preventive oils and liquids - Toast test - Part 1: Process for mineral oils 

TS EN ISO 4264 Petroleum products-Medium distillate fuels- Determination of cetane index by means of four-variable equation 

TS ISO 4266-1 Petroleum and liquid petroleum products-Automatic measurement of level and temperature in storage tanks-Section 1: Measurement of atmospheric tanks 

TS ISO 4266-2 Petroleum and liquid petroleum products-Automatic measurement of the level and temperature in storage tanks-Section 2: Measurement of marine tanks 

TS ISO 4266-3 Petroleum and liquid petroleum products-Automatic measurement of level and temperature in storage tanks-Section 3: Measurement of pressure storage tanks 

TS ISO 4266-4 Petroleum and liquid petroleum products-Automatic measurement of level and temperature in storage tanks-Section 4: Measurement of atmospheric tanks 

TS ISO 4266-5 Petroleum and liquid petroleum products-Automatic measurement of the level and temperature in storage tanks-Part 5: Measurement of the temperature of marine tanks 

TS ISO 4266-6 Petroleum and liquid petroleum products-Automatic measurement of level and temperature in storage tanks-Section 6: Measurement of pressure of storage tanks 

TS ISO 4268 Petroleum and petroleum products - Temperature measurements - Manual methods 

TS 4329 EN 13991 Coal pyrolysis products - Coal tar based oils; Creosotees - Properties and test methods 

TS 4349 ISO 3841 Oil waxes-Melting point determination-Cooling curve method 

TS 4350 ISO 2908 Oil waxes - Determination of oil content 

TS 4367 ISO 6244 Oil waxes and petroleum jellys - Determination of drip point 

TS 4368 ISO 5661 Petroleum products-Liquid hydrocarbons-Determination of refractive index 

TS 4392 Wood preservation rules-Peeling of pine timber used in cooling towers with creosote and salts 

TS 4393 Wood protection rules-Rail wood sleepers with creosote 

TS 4396 Production line elements - Production rods - Used in oil wells

Determination of particulate contamination in turbine aircraft fuels with TS 4608 F-54 diezel fuel (laboratory filtration method) 

TS 4639 Determination of corrosion of aircraft turbine fuel on silver (silver strip method) 

TS EN 4678: 2011 Aerospace series - Welding and soldering for aerospace structures - Connection of metallic materials by laser beam - Quality of welded structures 

TS 4684 Determination of copper content in aircraft turbine fuel and light petroleum products 

TS 4694 Determination of the amount of anti-icing agent in military turbine aircraft fuels 

TS 4695 Anti-icing agent (used in military turbine aircraft fuels)

TS 5240 Determination of viscosity and viscosity changes of low temperature aircraft turbine lubricating oils 

TS 5255 EN ISO 8819 Liquefied petroleum gases-Hydrogen sulfide determination-Lead acetate method 

TS ISO 5275 Aromatic hydrocarbons-Determination of the presence of mercaptans (thiols)-Doctor test 

TS 5353 Lubricating oils - Industrial oils and related products - Metal working fluids - Emulsified with water - Determination of emulsion stability 

TS 5366 Determination of thermal conductivity of liquids 

TS 5367 Determination of evaporation loss in greases over a wide temperature range

TS 5454 Auto gasoline with 91 octane (f-57) (used for military purposes) 

TS 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms 

TS 5474 Petrographic analysis methods of bituminous coal and anthracite-Terms 

TS 13446 Petroleum products - Gasoline - determination of total aromatic compounds with benzene, toluene, ethylbenzene, para, meta and ortho xylenes, c9 and heavier aromatic compounds - Gas chromatography method 

TS 5625 Determination of water vapor content in gaseous fuels by measuring dew point 

TS 5643 Determination of the resistance of lubricating greases to water spraying 

TS 5644 Determination of overpressure (ep) properties of lubricating greases (timken method) 

TS 5654 Determination of overpressure (ep) properties of lubricants (four-ball method) 

TS 5655 ISO 3771 Petroleum products-Determination of base number-Potentiometric titration method-Using perchloric acid 

TS 5703 Specific heat determination in oils and fats 

TS 5714 Removal of volatile impurities from used engine oils - Stripping method 

TS 5715 Determination of anti-wear properties of lubricants (four ball methods) 

TS 5718 Determination of solidification point in petroleum waxes 

TS 5740 Determination of boiling range distribution of gasoline and gasoline fractions - Gas chromatography method

TS 5788 Used in lignite-heating 

TS 5826 Regulation rules for natural gas zone regulators 

TS 5830 Activated carbon 

TS 5831 Activated carbon (hard coal) - Determination of hardness 

TS 5834 Gas pressure regulation rules for natural gas pipelines 

TS 5853 EN ISO 3830 Petroleum products-Determination of lead content in gasoline-Iodine monochloride method

TS 6122 ISO 6614 Petroleum products-Determination of the separation properties of petroleum oils and synthetic fluids from water 

TS 6123 Analysis of natural gas-liquid mixtures-Gas chromatography method 

TS 6145 Needle penetration test in petroleum waxes 

TS 6146 EN ISO 13759 Petroleum products-Determination of alkyl nitrate in diesel fuels-Spectrometric method 

TS 6147 EN ISO 12937 Petroleum products- Water determination- Coulometric snow fischer titration method 

TS EN ISO 6246 Petroleum products - Engine gasoline and aviation fuels - Determination of existing gum content - Rapid evaporation method 

TS ISO 6249 Petroleum products - Determination of thermal oxidation stability of gas turbine fuels - Jftot method 

TS 6285 Prevention of hydration by addition of methanol to natural gas 

TS 6314 Total nitrogen determination in lubricating oils and fuel oil - Improved kjeldahl method 

TS 6314 Total nitrogen determination in lubricating oils and fuel oil - Improved kjeldahl method

TS EN ISO 6326-3 Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan and carbonyl sulfur sulfur by potentiometric method 

TS EN ISO 6326-5 Determination of natural gas-sulfur compounds 5: Lingener combustion method 

TS EN ISO 6326-1 Natural gas- Determination of sulfur compounds- Part 1: General introduction 

TS EN ISO 6327 Gas analysis - Determination of water dew point of natural gas - Cold surface condensation hygrometers 

TS 6339 Determination of lubricating properties of graphite

TS ISO 6342 Micrographs - Aperture cards - Method of measuring the thickness of the image area 

TS 6356 Natural gas meters - Connection heads with two connections 

TS 6356 / T1 Natural gas meters - Connection heads with two connections 

TS 6356 / T2 Natural gas meters - Connection heads with two connections 

TS 6356 / T3 Natural gas meters - Two connection connection heads modified 3 

TS 6356 / T4 Natural gas meters - Connection heads with two connections 

TS 6495 Determination of hydrogen sulfide in gas fuels (lead acetate reaction rate method)

TS EN ISO 6570 (Formerly: TS ISO 6570) Natural gas-Determination of possible liquid hydrocarbon content-Gravimetric methods 

TS ISO 6570 / T1 (Number Modification, TS EN ISO 6570) Natural gas-Determination of possible liquid hydrocarbon content-Gravimetric methods 

TS ISO 6578 Refrigerated liquid hydrocarbons - Static measurement methods calculation 

TS 6590 ISO 10336 Crude oil - Water determination - Potentiometric profit fischer titration method 

TS 6591 Petroleum products - Determination of sulfur - High temperature method 

TS 6593 Determination of refractive index in viscous materials

TS ISO 6743-7 Lubricating oils, industrial oils and related products - (class l) - Classification - Part 7: Group m (metal working fluids) 

TS ISO 6743-15 Lubricants, industrial oils and related products (class l) classification - Part 15: Group e (internal combustion engine oils) 

TS ISO 6743-99 Lubricating oils-, industrial oils and related products (class l) -Classification-Part 99: General 

TS ISO 6743-1 Lubricating oils, industrial oils and related products (class l) - Classification - Part 1: Type a (total loss systems)

TS EN 237 Liquid petroleum products - Gasoline - Low concentration lead determination - Atomic absorption spectrometry method 

TS 6769-2 Gas station-distribution systems with and without pumps 2: Installation rules 

TS 6769-3 Fuel stations-Pump and non-pump distribution systems-Part 3: Post-plant maintenance rules 

TS 6771 Determination of precipitation numbers of lubricating oils - Solvent naphtha, centrifugation method 

TS EN ISO 6807 Rubber hoses and hose assemblies -For rotary drilling and vibrating applications -Features 

TS 6830 ISO 7120 Petroleum products and lubricants-Petroleum-based oils and other fluids-Determination of rust inhibiting properties in water presence 

TS 6832 Measurement of overpressure properties of liquid lubricants (phalex needle and v block method) 

TS 6833 Determination of peroxide number in jet fuels 

TS 6835 Determination of the anti-vibration properties of lubricating greases in ball bearings

TS 6839 Determination of sodium in residual fuel oil - Flame photometric method 

TS 6840 Determination of storage stability of water-in-oil emulsions - Oven test method 

TS 6841 Determination of the stability of the water-in-oil emulsions under conditions of conversion from low temperature to ambient temperature 

TS 6879 Activated coal - Total ash determination

TS EN ISO 6974-3 Natural gas - Determination of the accuracy of the composition as defined by gas chromatography - Part 3: Determination of hydrocarbons up to hydrogen, helium, oxygen, nitrogen, carbon dioxide and c8 using a packed column  

TS EN ISO 6974-6 Natural gas-Gas chromatographic analysis-Determination of the composition with a given uncertainty-Section 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and carbon hydrocarbons from 1 to 8 using three capillary columns 

TS EN ISO 6974-5 Natural gas - Determination of the accuracy of the composition as defined by gas chromatography (en ISO 6974-5: 2001) - Part 5: Determination of nitrogen, carbon dioxide c1 to c5 and c6 + hydrocarbons using three columns and on-line applications  

TS EN ISO 6975 Natural gas - Extended analysis - Gas chromatography method

TS EN ISO 6978-1 Natural gas-Mercury determination-Mercury sampling by chemical adsorption on iodine 

TS 7075 Determination of water and sediment in medium range distillate fuels - centrifugation method 

TS 7077 Petroleum waxes - Determination of peroxide number 

TS 7078 Determination of the quality of white mineral oils - Ultraviolet absorption method

TS 7085 Paraffin waxes - Determination of carbonizable substances 

TS 7087 Oil waxes - Determination of kinetic friction coefficient in wax coatings 

TS 7088 EN 238 Liquid petroleum products-Determination of gasoline-benzene content-Infrared spectrometric method 

TS 7111 Qualitative determination of inorganic chloride and sulphates in insulating oils 

TS 7112 Determination of total additives in light hydrocarbons 

TS 7113 Petroleum products - Viscosity - Calculation of density constant (vys) 

TS 7113 Petroleum products - Viscosity - Calculation of density constant (vys)  

TS 7116 Petroleum products - Gasoline - Determination of C2-C5 hydrocarbons by gas chromatography 

TS 7117 Hydrogenation and determination of sulfur in petroleum products by comparison colorimeter

TS EN ISO 7278-1 Liquid hydrocarbons - Dynamic metering - Volume verification systems - Part 1: General requirements 

TS EN ISO 7278-2 Liquid hydrocarbons - Dynamic measuring - Volume verification systems - Part 2: Pipe validators 

TS EN ISO 7278-2 Liquid hydrocarbons - Dynamic measuring - Volume verification systems - Part 2: Pipe validators 

TS ISO 7278-3 Liquid hydrocarbons - Dynamic measuring methods - Validation systems for volumetric measuring devices - Part 3: Pulse count correction techniques 

TS ISO 7278-4 Liquid hydrocarbons - Dynamic measurement methods verification systems for volume measuring devices - Part 4: Guide for pipe verifier operators 

TS 7330 Quality control of petroleum products (for military purposes) 

TS 7339 Determination of superficial tearing and spreading points of petroleum waxes 

TS 7364 Workshop gauges - for threading of drill casing pipes and sleeves 

TS 7368 Determination of carbonizable substances in white mineral oils 

TS 7369 Determination of dilution by gasoline in used gasoline engine oils - Distillation method 

TS 7442 Determination of the life of automotive wheel bearing greases 

TS 7447 Distillation of petroleum products under reduced pressure

TS 7468 Determination of trace amounts of volatile chloride in butane-butene mixtures-Lamp method 

TS 7469 ISO 8216-99 Petroleum products - Fuels (class f) - Classification - Part 99: General 

TS 7470 ISO 8216-2 Petroleum products - Fuels (class f) - Classification - Part 2: Gas turbine fuel types used in industry and maritime 

TS 7473 Measurement of transition temperature in petroleum waxes-Differential scanning calorimeter 

TS 7540 Surface wax on waxed paper or paperboard 

TS 7556 Determination of trace amounts of volatile chloride in Butane-Butene mixtures - Hydrogen - Oxygen combustion method 

TS ISO 7624 Petroleum products and lubricants-Additive mineral turbine lubricating oils-Determination of oxidation stability 

TS ISO 7624 Petroleum products and lubricants-Additive mineral turbine lubricating oils-Determination of oxidation stability 

TS 7713 Determination of pentane insoluble substances in mineral oils-Membrane filtration method

TS 7841 Determination of API gravity in crude oil and petroleum products-Hydrometer method 

TS 7841 Determination of API gravity in crude oil and petroleum products-Hydrometer method 

TS 7887 Water quality - Determination of oil and grease - Gravimetric method 

TS 7909 ISO 7537 Petroleum products-Acid number determination-Semi-micro-Color marker titration method 

TS 7909 ISO 7537 Petroleum products-Acid number determination-Semi-micro-Color marker titration method 

TS 7930 Imprint plate and chain (used for military purposes) 

TS 7997 Determination of non-sulphonated residue in petroleum based plant spray oils 

TS 8001 ISO 4265 Petroleum products-Lubricating oils and additives-Determination of phosphorus content quinoline phosphomolybdate method 

TS ISO 8068 / tst T1 Lubricating oils - Industrial oils and related products (class l) - Type t (turbines) - Characteristics of lubricating oils used for turbines  

TS 8033 Determination of durability and load carrying capacity of solid film lubricants (falex needle and v block method) 

TS 8034 Determination of yield voltages of heterogeneous fuels - Cone penetration method 

TS 8035 Determination of resistance to sudden temperature changes of solid film forming lubricants

TS 8037 Natural gas pipelines - Cathodic protection criteria 

TSE / TS 8038 Liquefied petroleum gases (lpg) - Guide for odorizing gases 

TS 8039 Natural gas pipeline - Repair rules 

TS 8040 General materials and equipment used in natural gas transport and distribution pipelines 

TS 8042 Hydrocarbon waxes used in electrical insulation - Determination of volume contraction on cooling basis

TS 8149 Analysis of graphite used as lubricant-Determination of volatile matter 

TS 8152 Test methods for hydrocarbon waxes used in electrical insulation 

TS 8152 Test methods for hydrocarbon waxes used in electrical insulation  

TS 8186 Destilled fuels - Determination of free water and pollutants - Clear and bright 

TS 8222 Determination of high temperature performance properties of lubricating greases in roller bearings 

TS EN ISO 8222 Oil measuring systems - Calibration - Temperature regulation used in the calibration of volumetric verification

TS 8411 Sampling from liquid hydrocarbons - Floating piston cylinder method 

TS 8412 Determination of hydrocarbon types in saturated petroleum fractions - High ionized stress mass spectrometer method 

TS 8413 Lubricating oils - Determination of adhesion to solid film forming surfaces 

TS 8414 EN 14163 Oil and gas industries - Pipeline transport systems - welding of pipelines 

TS 8416 Engine oils - Determination of viscosity at high temperature and high shear rate - Taper roller bearing simulator method 

TS 8420 Separation of aromatics and non-aromatic fractions from high boiling oils - Stripping chromatography method 

TS 8456 ISO 3012 Gasoline gas and distillate fuels-Determination of mercaptan sulfur-Potentiometric titration method

TS ISO 8681 Petroleum products and lubricants -Classification method-Description of classes 

TS 8682 ISO 8216-1 Petroleum products - Fuels (class f) - Classification - Part 1: Classification of marine fuels 

TS ISO 8691 Petroleum products - Liquid fuels - Determination of low levels of vanadium - After ash formation - Flameless atomic absorption spectrometric method 

TS ISO 8697 Crude petroleum and petroleum products - Calculation of transferred quantities - Evaluation of pre-loading quantity (obq) or post-discharging quantity (rob) on board 

TS 8826 Oil odor-Ash determination-Gravimetric method 

TS 8826 Oil odor-Ash determination-Gravimetric method 

TS 8827 Fuels-Used in aviation-Determination of pour point at low temperatures 

TS 8828 Sample containers-Used in aviation fuels -Using rules -In experiments to be effected by trace impurities 

TS 8829 Gasoline-Manganese determination-Flame atomic absorption spectrophotometric method

TS 8955 Natural gas service line - Design and installation rules - For steel line pipes 

TS EN ISO 8973 (Former no: TS ISO 8973) Liquefied petroleum gases - Calculation of density and vapor pressure 

TS ISO 8973: 1998 / T1 (Number modification, TS EN ISO 8973) Liquefied petroleum gases - Calculation of density and vapor pressure 

TS 9050 Natural gas service line design and installation rules for copper pipelines 

TS 9051 Natural gas service line design and installation rules for plastic pipelines 

TS 9088 Oil odor - Determination of volatile matter - Gravimetric method 

TS 9088 Oil odor - Determination of volatile matter - Gravimetric method 

TS 9089 Rolling oils - Unused - dispersed in water - Determination of dispersion stability 

TS 9090 Destilled fuels - determination of stability at 43øc temperature

TS ISO 8681 Petroleum products and lubricants -Classification method-Description of classes 

TS 8682 ISO 8216-1 Petroleum products - Fuels (class f) - Classification - Part 1: Classification of marine fuels 

TS ISO 8691 Petroleum products - Liquid fuels - Determination of low levels of vanadium - After ash formation - Flameless atomic absorption spectrometric method 

TS ISO 8697 Crude petroleum and petroleum products - Calculation of transferred quantities - Evaluation of pre-loading quantity (obq) or post-discharging quantity (rob) on board 

TS 8826 Oil odor-Ash determination-Gravimetric method 

TS 8826 Oil odor-Ash determination-Gravimetric method 

TS 8827 Fuels-Used in aviation-Determination of pour point at low temperatures 

TS 8828 Sample containers-Used in aviation fuels -Using rules -In experiments to be effected by trace impurities 

TS 8829 Gasoline-Manganese determination-Flame atomic absorption spectrophotometric method

TS 8955 Natural gas service line - Design and installation rules - For steel line pipes 

TS EN ISO 8973 (Former no: TS ISO 8973) Liquefied petroleum gases - Calculation of density and vapor pressure 

TS ISO 8973: 1998 / T1 (Number modification, TS EN ISO 8973) Liquefied petroleum gases - Calculation of density and vapor pressure 

TS 9050 Natural gas service line design and installation rules for copper pipelines 

TS 9051 Natural gas service line design and installation rules for plastic pipelines 

TS 9088 Oil odor - Determination of volatile matter - Gravimetric method 

TS 9088 Oil odor - Determination of volatile matter - Gravimetric method 

TS 9089 Rolling oils - Unused - dispersed in water - Determination of dispersion stability 

TS 9090 Destilled fuels - determination of stability at 43øc temperature

TS 9102 Peat - Classification 

TS 9103 Peat- Determination of ash and organic matter 

TS 9104 Peat-Ph determination 

TS 9105 Peat- Determination of moisture content 

TS 9106 Peat- Determination of electrical conductivity and salt content 

TS ISO 9114 Determination of water content by crude oil-hydride reaction-Field method 

TS 9119 Natural gas - Determination of hydrogen, inert gases and hydrocarbons up to c8 - Gas chromatographic method

TS 9138 Oil wax - Odor determination 

TS 9164 Peat- Determination of degree of peat 

tst 9176 EN ISO 8222 Oil measuring systems - Calibration - Temperature corrections used in the calibration of volumetric verification (iso 8222: 2002)  

TS 9177 Petroleum products - Determination of base number - Potentiometric titration method 

TS 9178 ISO 6618 Petroleum products and lubricants - Determination of acid or base number - Color marker titration method 

TS 9187 Acceptable deterioration limits for fuels, lubricants and related products (stanag 1110) 

TS 9187 Acceptable deterioration limits for fuels, lubricants and related products (stanag 1110) 

TS ISO 9200 Crude oil and petroleum products - High viscosity hydrocarbons volume measurement 

TS 9228 Engine oils - Used in gasoline fueled engines - Determination of oxidation stability by thin film oxygen absorption (ifoe) 

TS 9228 Engine oils - Used in gasoline fueled engines - Determination of oxidation stability by thin film oxygen absorption (ifoe) 

TSE EEC / 93 / 12: 2001 Council regulation on the sulfur content of certain liquid fuels 23 march 1993 date and numbered 93 / 12 / at 

TS 9348 EN ISO 6808 Plastic hoses and hose fittings - Used for suction and discharge at low pressure - For petroleum based liquids - Specifications

TS 10041 Peat - Determination of density, porosity, water capacity and air capacity 

TS 10062 Flammable materials - Solid and liquid - Determination of spontaneous combustion value - Differential mackey method 

TS 10065 Oil compressed with odor-Calcined-Vibration device - Determination of compressed density 

TS 10065 Oil compressed with odor-Calcined-Vibration device - Determination of compressed density 

TS 10101 Lubricating greases - Determination of anti-wear properties - with (falex) block ring wear tester 

TS EN ISO 10101-1 Natural gas - Determination of water by Karl fischer method - Part 1: Introduction 

TS EN ISO 10101-2 Natural gas - Determination of water by Karl fischer method - Part 2: Titration process 

TS EN ISO 10101-3 Natural gas - Water determination by Karl fischer method - Part 3: Coulometric process

TS 10317 EN ISO 5165 Petroleum products- Diesel fuels- Determination of ignition quality- Cetane engine method 

TS 10331 Natural gas pipeline valve installation rules 

TS ISO 10337 Crude oil - Water determination - Coulometric snow fischer titration method 

TS EN ISO 10405 Oil and gas industry - Maintenance and handling rules for casing and production pipe 

TS EN ISO 10407-2 Oil and gas industry-Rotary drilling rig-Part 1: Inspection and classification of used drilling pot elements 

TS EN ISO 10414-1 Oil and gas industry-Field testing of drilling fluids-Part 1: Water-based liquids 

TS EN ISO 10418 / AC Oil and gas industries - Marine production platforms - Analysis, design, installation and testing of basic surface process safety systems " 

TS EN ISO 10423 Oil and gas industries - Drilling and production equipment - Borehole and production control equipment 

TS EN ISO 10424-1 Oil and gas industry-Rotary drilling rig-Part 1: Rotary drilling pot elements 

TS EN ISO 10424-2 Oil and gas industry-Rotary drilling rig-Part 2: Threading and gauging of rotary, post-screw connections 

TS EN ISO 10426-4 Oil and gas industry - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement mortars at atmospheric pressure 

TS EN ISO 10426-5 Oil and gas industry-Cements and materials for well cementing-Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure 

TS EN ISO 10426-1 Oil and gas industry - Cements and materials for well cementing - Part 1: Specifications 

TS EN ISO 10426-6 Oil and gas industry-Cements and materials for well cementing-Part 6: Methods for determination of statil gel strength of well cement formulations 

TS EN ISO 10427-1 Oil and gas industry-Casing pipe centerers-Belt spring type

TS EN ISO 10437 Plumbing - Fittings for bendable metal pipes 

TS EN ISO 10441 Oil and gas industry - Flexible couplings for mechanical transmission - Special purpose applications 

TS 10478 Protective oils - Determination of rust inhibiting properties - Moisture chamber method 

TS ISO 10478 Petroleum products - Determination of aluminum and silicon in oil fuels - Inductively coupled plasma emission and atomic absorption spectroscopy methods 

TS 10480 Fuels - Used in spark ignition engines - Determination of water tolerance

TS 10649 Military fuels - Aircraft fuel f-18, 100 / 130 octane 

TS 10693 Oil odor - Calcined - Real density determination - Xylene displacement method 

TS 10693 Oil odor - Calcined - Real density determination - Xylene displacement method

TS 10730 Fuel soluble corrosion inhibitor / lubricants (stanag 3390) 

TS ISO 10752 Coal - Sizing equipment - Performance evaluation 

TS 10773 Fuels-Used in aviation-Octane number determination-Supersarsj method 

TS ISO 10838-1 Polyethylene piping systems - for the supply of gas fuels - Mechanical fittings section 1: Metal fittings for pipes with a nominal outside diameter equal to or less than 63 mm 

TS ISO 10838-2 Pipe systems - For the supply of polyethylene gas fuels - Mechanical fittings section 2: Metal fittings for pipes with a nominal outside diameter of 63 mm 

TS 10874 Natural gas distribution lines - Signs-Rules 

TS 10879 Expansion Joints - Rubber bellows-used in gas pipelines and installations 

TS 11017 Petroleum odor - Calcined - Determination of dusting agent 

TS 11017 Petroleum odor - Calcined - Determination of dusting agent 

TS 11017 Petroleum odor - Calcined - Determination of dusting agent  

TS 11017 Petroleum odor - Calcined - Determination of dusting agent  

TS 11018 Lubricating oils - Used in two-stroke petrol engines - Determination of lubrication

TS 11203 Anti-fogging liquids - used in road vehicles 

TS 11204 Washing fluids-Used in auto glass 

TS 11205 Paraffin-Liquid 

TS 11207 Lubricating oils-Used in machines with fully dispersed lubrication systems 

TS 11207 / T1 Lubricating oils-Used in machines with fully dispersed lubrication systems 

TS 11207 / T2 Lubricating oils-Used in machines with fully dispersed lubrication systems 

TS 11207 Lubricating oils-Used in machines with fully dispersed lubrication systems  

TS 11223 / T1 Diaphragm materials - Homogeneous or reinforced elastomer - Used in gas distribution devices and installations 

TS 11250 Wastes-Definitions of terms-Related to fuels obtained from waste

TS 11509 Lubricating oils-Rubber lubricants-Non-petroleum-based-used in brake systems of motor vehicles 

TS 11509 Lubricating oils-Rubber lubricants-Non-petroleum-based-used in brake systems of motor vehicles  

TS 11532 Corrosion inhibitors - used in engine cooling systems 

TS 11554 Peat-Grain analysis 

TS 11571 Activated charcoal-Powder 

TS 11572 Activated coal - Powder - Test methods

TS 11984 Lubricating oils - Industrial oils and related products (class l) - Lubricating oils - Used in steam cylinders (group z) 

TS 11997 Lubricating oils, industrial lubricants and related products (class l) - Lubricating oils - Used in compressed air devices (group p) 

TS EN 12065 Liquefied natural gas (lng) plant and equipment-Compatibility test of foam concentrates designed for the production of fire extinguishing powders and medium and high expansion foam used in liquefied natural gas fires 

TS EN 12066 Installation and equipment for liquefied natural gas - Testing of insulating linings for holding pools of liquefied natural gas storage 

TS 12074 Pipelines-Crude oil, liquid petroleum products, liquefied petroleum gases, liquid anhydrous ammonia and alcohols used in the transport-General rules

TS EN 12311-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of tensile properties 

TS EN 12317-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of shear strength of joints 

TS 12330 Lubricating oils, industrial oils and related products - lubricating oils (class l) - group e: Engine oils - Used in gasoline and diesel engines 

TS 12330 / T1 Lubricating oils, industrial oils and related products - lubricating oils (class l) - group e: Engine oils - Used in gasoline and diesel engines 

TS 12330 / T2 Lubricating oils, industrial oils and related products - lubricating oils (class l) - group e: Engine oils - Used in gasoline and diesel engines 

TS 12351 Lubricating-Oils-Total loss systems (ts-L-An) used

TS 12663 Fuel outlets and / or fuel outlets - General rules 

TS EN 12766-3 Petroleum products and used oils-Determination of pcbs and related products - Part 3: Determination of the content of polychlorinated terphenyl (pct) and polychlorinated benzyl toluene (pcbt) using an electron capture detector (ecd) and a gas chromatography (gc); determination 

TS EN 12766-3 Petroleum products and used oils-Determination of pcbs and related products - Part 3: Determination of the content of polychlorinated terphenyl (pct) and polychlorinated benzyl toluene (pcbt) using an electron capture detector (ecd) and a gas chromatography (gc); determination 

TS EN 12766-2 Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (pcb) content 

TS EN 12766-2 Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (pcb) content 

TS EN 12766-3 / AC Petroleum products and used oils - Determination of PCBs and related products - Part 3: Using a gas chromatography (gc) with electron capture detector (ecd) of polychlorinated terphenyl (pct) and polychlorinated benzyl toluene (pcbt) content determination and determination 

TS EN 12766-3 / AC Petroleum products and used oils - Determination of PCBs and related products - Part 3: Using a gas chromatography (gc) with electron capture detector (ecd) of polychlorinated terphenyl (pct) and polychlorinated benzyl toluene (pcbt) content determination and determination 

TS 12820 Gas stations - Safety requirements 

TS 12820 / T1 Gas stations - Safety requirements 

TS 12820 / T2 Gas stations - Safety requirements 

TS EN 12838 Plants and equipment for liquefied natural gas - Compatibility testing of LNG sampling systems

TSE ISO / TS 12902 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods 

TS ISO 12925-1 Lubricating oils, industrial oils and related products - (class l) - Group c (gear oils) - Part 1: Characteristics of oils used in closed gear systems 

TS ISO 12925-1 / tst T1 Lubricating oils, industrial oils and related products - (class l) - Group c (gear oils) - Part 1: Characteristics of oils used in closed gear systems  

TS 12932 Aviation turbine fuels-Determination of hydrogen content-Low separation power nuclear magnetic resonas spectrometry method 

TS EN 13016-1 Liquid petroleum products - Vapor pressure - Part 1: Determination of vapor pressure (asvp) of the air saturated sample and the corresponding calculated dry vapor pressure (dvpe) 

TS EN 13016-2 Liquid petroleum products - Vapor pressure - Part 2: Determination of absolute vapor pressure (avp) between 40 ° C and 100 ° C

TS EN 13275 Cryogenic tanks - Pumps for cryogenic service 

TS EN 13301 Bitumen and bituminous binders - Determination of the tendency of bitumen to stain 

TS EN 13302 Bitumen and bituminous binders - Determination of the dynamic viscosity of bituminous binders using a rotary tube 

TS EN 13303 Bitumens and bituminous binders - Determination of mass loss of industrial bitumen by heating 

TS EN 13304 Bitumen and bituminous binders - Basic properties of oxidized bitumen 

TS EN 13305 Bitumen and bituminous binders - Basic properties of hard bitumen used in industry 

TS 13350 Marine fuels - Fuel-blended products - from petroleum-based waste

TS EN ISO 13503-2 / A1 Oil and gas industry - Well completion fluids and materials - Part 2: Supports for hydraulic fracturing and gravel filling - Measurement of properties 

TS EN ISO 13503-2 Oil and gas industry - Well completion fluids and materials - Part 2: Supports for hydraulic fracturing and gravel filling - Measurement of properties 

TS EN ISO 13503-3 / AC Oil and gas industry-Well completion fluids and materials-Part 3: Intensive salt water-Tests 

TS EN ISO 13503-3 Oil and gas industry - Well completion fluids and materials - Part 3: Dense brine - Test methods 

TS EN ISO 13503-4 Petroleum and natural gas industry - Well completion fluids and materials - Part 4: Determination of leakage in activating liquid and gravel filler liquid under static conditions 

TS EN ISO 13503-5 Geosynthetic barriers - Characteristics required for the manufacture of liquid waste disposal sites, transfer stations or secondary containment structures

 TS EN ISO 13624-1 Oil and gas industry- Drilling and production equipment-Part 1: Design and operation of marine drilling systems 

TS EN ISO 13626 Oil and gas industry-Drilling and production equipment-Drilling and good service structures 

TS EN ISO 13628-6 Oil and gas industry - Design and operation of underwater production systems - Part 6: Underwater production control systems

 TS EN ISO 13624-1 Oil and gas industry- Drilling and production equipment-Part 1: Design and operation of marine drilling systems 

TS EN ISO 13626 Oil and gas industry-Drilling and production equipment-Drilling and good service structures 

TS EN ISO 13628-6 Oil and gas industry - Design and operation of underwater production systems - Part 6: Underwater production control systems 

TS EN 13702 Bitumen and bituminous binders - Determination of dynamic viscosity in modified bitumen by cone and plate method 

TS EN ISO 13703 / AC Oil and gas industry - Offshore production platforms - Design and installation of piping systems 

TS EN ISO 13704 Oil, petrochemical and natural gas industry-Heater in oil refineries-Calculation of pipe thickness 

TS EN ISO 13704 / AC Petroleum, petrochemical and natural gas industries - Calculation of heating pipe thickness in oil refineries

TS EN 13856 Automotive lpg systems - Minimum requirements for owner's manual 

TS ISO 13909-1 Coal and coke - Mechanical sampling - section 1: General introduction 

TS ISO 13909-6 Hard coal and coke - Mechanical sampling - Part 6: Coke - Preparation of test samples 

TS ISO 13909-7 Quarry and coke - Mechanical sampling - Section 7: Methods for sampling, sample preparation and testing 

TS ISO 13909-8 Coal and coke - Mechanical sampling - section 8: Test methods for systematic error determination 

TS EN 13923 Filament winding frp (fiber reinforced plastic) pressure vessels - Materials, design, manufacturing and testing

TS EN 14262 Coal prolysis products - Coal tar and pitch based binders and related products: Briquetting pitch - Properties and test methods  

TS EN 14263 Coal pyrolysis derivatives - Coal tar and bitumen based binders and related products: Carbon binder bitumen - Dispersing properties and test methods 

TS EN 14264 Coal pyrolysis derivatives - Coal tar and pitch based binders and related products: Impregnation pitch - Distinctive properties and test methods 

TS EN 14265 Coal pyrolysis products - Coal tar and pitch based binders and related products: Paint tar - Properties and test methods 

TS EN 14266 Coal pyrolysis products - Coal tar and pitch based binders and related products: Coating tar - Properties and test methods

TS EN ISO 14596 Petroleum products - Determination of sulfur content - Wavelength separation x - Ray fluorescence spectrometric method 

TS EN ISO 14597 (Formerly no: TS ISO 14597) Petroleum products-Determination of vanadium and nickel content-Wavelength scanning x-ray fluorescence spectrometric method 

TS ISO 14597: 1997 / T1 (Number modification, TS EN ISO 14597) Petroleum products-Determination of vanadium and nickel content-Wavelength-separated x-ray fluorescence spectrometric method 

TS EN 14639 Crude tar and crude benzene-Distinguishing properties and test methods 

TS EN ISO 14692-1 Glass fiber reinforced plastic (ctp) pipe systems - part used in the oil and gas industry 1: Terms, symbols, applications and materials 

TS EN ISO 14692-4 Glass fiber reinforced plastic (ctp) pipe systems - Part used in the oil and gas industry 4: Plant, installation and operation 

TS EN ISO 14723 Oil and gas industry - Pipeline transport systems - Underwater pipeline valves

TS EN ISO 15136-2 Oil and gas industry-Well equipment- Gradual cavity pump (pcp) system used in production - Part 2: Surface driven systems 

TS EN ISO 15136-2 Oil and gas industry-Well equipment- Gradual cavity pump (pcp) system used in production - Part 2: Surface driven systems 

TS EN 15326 + A1 Bitumen and bituminous binders-Determination of density and specific mass-Capillary cap pycnometer method 

TS EN 15469 Petroleum products - Determination of free water in liquefied petroleum gases (lpg) by visual inspection 

TS EN 15470 Liquefied petroleum gases (lpg) - Determination of dissolved residues - High temperature gas chromatographic method 

TS EN 15484 Ethanol - Used as gasoline blending component - Determination of inorganic chloride - Potentiometric method 

TS EN 15485 Ethanol-Used as gasoline blending component-Determination of sulfur content-Wavelength-separated x-ray fluorescence spectrometry method 

TS EN 15486 Ethanol - Used as gasoline blending component - Determination of sulfur content - Ultraviolet fluorescence method 

TS EN 15489 Ethanol - Used as gasoline blending component - Determination of water content - Karl fisher coulometric equalization method 

TS EN 15491 Ethanol - Used as gasoline blending component - Determination of total acidity - Equivalent method with color indicator

TS ISO 15597 Petroleum and petroleum products - Determination of chlorine and bromine content - Wavelength dispersed x-ray fluorescence spectrometry method 

TS EN ISO 15663-1 Oil and gas industry-Cost of life-Part 1-Methodology 

TS EN 15691 Ethanol as a mixing component for petroleum - Determination of total dry residue (non-volatile matter) - Gravimetric method 

TS EN 15692 Ethanol as a mixing component for petroleum - Determination of water content - Karl fischer potentiometric titration method

TS EN 15984: 2011 Petroleum industry and its products- Calculation of carbon and heat value and determination of the composition of refinery heating gas-Gas chromatographic method 

TS EN ISO 16070 Oil and gas industry-Well equipment-Locking mandrels and fitting nipples 

TS EN ISO 16591: 2010 Petroleum products - Determination of sulfur content - Oxidative microculometry method 

TS EN 15440: 2011 Solid fuels - Methods for determination of recovered biomass content 

TS EN ISO 16708 Oil and gas industry - Pipelines - Confidence-based boundary state methods 

TS EN ISO 16812 Oil and gas industry - Shell and tube heat exchangers 

TS EN ISO 17078-1 Oil and gas industry - Drilling and production equipment - Part 1: Side pocket mandrels (ISO 17078-1: 2004) 

TS EN ISO 17078-4 Oil and gas industry - Drilling and production equipment - Part 4: Rules for side pocket mandrels and associated fittings 

TS EN ISO 17078-1 / A1 Oil and gas industry-Drilling and production equipment- Part 1: Side pocket mandrels 

TS EN ISO 18453 Correlation between natural gas-water content and water dew point

TS EN 15751 Automotive fuels - Blends of fatty acid methyl esters (yame) fuels and diesel fuel - Determination of oxidation stability by accelerated oxidation 

TS EN 15769 Ethanol as a mixing component for petroleum - Determination of appearance - Visual method 

TS EN 15794 Determination of explosion points of flammable liquids 

TS EN 15837 Ethanol - Used as a blending component in gasoline - Determination of phosphorus, copper and sulfur content - Direct method with an optionally bonded plasma optical emission spectrometer (ICPOES) 

TS ISO 15911 Petroleum products-Aviation turbine fuels-Calculation of net combustion temperature from hydrogen content data

TS EN 15751 Automotive fuels - Blends of fatty acid methyl esters (yame) fuels and diesel fuel - Determination of oxidation stability by accelerated oxidation 

TS EN 15769 Ethanol as a mixing component for petroleum - Determination of appearance - Visual method 

TS EN 15794 Determination of explosion points of flammable liquids 

TS EN 15837 Ethanol - Used as a blending component in gasoline - Determination of phosphorus, copper and sulfur content - Direct method with an optionally bonded plasma optical emission spectrometer (ICPOES) 

TS ISO 15911 Petroleum products-Aviation turbine fuels-Calculation of net combustion temperature from hydrogen content data

TS EN ISO 19901-2 Oil and gas industry - Special requirements for marine structures - part 2: Seismic design procedures and criteria (iso / fdis 19901-2: 2004) 

TS EN ISO 19901-6 Oil and gas industry - Offshore structures - Special requirements - Part 6: Maritime operations

TS EN ISO 20884: 2011 Petroleum products - Automotive fuels - Determination of sulfur content - Wavelength separation x-ray fluorescence spectrometry method 

TS EN ISO 20884: 2011 Petroleum products - Automotive fuels - Determination of sulfur content - Wavelength separation x-ray fluorescence spectrometry method

TS EN ISO 21329 Oil and gas industry - Pipeline transport systems - Test procedures for mechanical connectors (iso 21329: 2004) 

TS EN ISO 21457: 2010 Oil, petrochemical and natural gas industry - Selection of materials for oil and gas production systems and control of corrosion 

TS EN ISO 21469 Safety in machines - Accidental contact of products with lubricants - Hygiene

TS EN ISO 23251 / AC Pressure relief and pressure relief systems for the petroleum, petrochemical and natural gas industries 

TS EN ISO 23251 / A1 Pressure relief and pressure relief systems for the petroleum, petrochemical and natural gas industries 

TS EN ISO 23936-1 Oil, petrochemical and natural gas industry - Non-metallic materials in contact with the oil and gas production environment - Part 1: Thermoplastics 

TS EN ISO 25457 Oil, petrochemical and natural gas industries - Chamfering details for petrochemicals and refineries 

TS EN ISO 28300 / AC Oil, petrochemical and natural gas industries - Ventilation of atmospheric and low pressure storage tanks 

TS EN ISO 28300 Petrol. petrochemical and natural gas industries - Atmospheric and low pressure storage tanks 

TS EN ISO 28460: 2010 Oil and gas industry - Installations and equipment for liquefied natural gas - Loading and unloading operations between ships and ports