Our company provides internationally approved and accredited test, inspection and inspection services with its expert staff in the following standards.
TS EN 50281-2-1 Electrical devices for use in flammable dust environments - Part 2-1: Test methods - Determination of the lowest ignition temperature of dust
TS EN 50303 Group I, category m1 equipment intended to remain in the dangerous state created by the atmosphere by grizu and / or explosive gas
TS EN 50394-1 Electrical devices for use in potentially explosive atmospheres - Group I - Intrinsically safe systems - Part 1: Construction and testing
TS EN 13160-4 Leak detection systems - Part 4: Liquid and / or vapor detection systems for use in leachate or intermediate spaces
TS EN 60079-20-1 Electrical devices for explosive gas environments - Part 20-1: Material properties for gas and vapor classification - Test methods and data
TS EN 60079-25 Electrical devices used in explosive gas atmospheres section 25: Intrinsically safe systems
TS EN 60079-19 Explosive atmospheres - Part 19: Equipment repair, maintenance and improvement
TS EN 60079-29-4 Electrical devices - Used in explosive atmospheres - Part 29-4: Gas detectors - Performance characteristics of open road detectors for combustible gases
TS EN 60079-35-1 Explosive atmospheres - Part 35-1: Grizu and mine-sensitive lamps - General rules on the risk of construction and explosion tests
60079-35-1: 2011 / AC Explosive atmospheres - Part 35-1: Grizu and mine-sensitive lamps-- General rules on the risk of construction and explosion tests
TS EN 60079-11 Explosive gas atmospheres - Part 11 - "i" type self-protected devices
TS EN 60079-13 Electrical devices for use in explosive gases - Part 13: Construction and use of rooms or buildings protected by pressurization
tst EN 62013-2 Headlamps for grizu sensitive mines - Part 2: Other performance and safety considerations
TS EN 13237 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
TS EN 13237 Potentially explosive atmospheres - terms and definitions for equipment and protective systems designed for use in potentially explosive atmospheres
TS EN 60079-0 Explosive atmospheres - Part 0: Hardware - General requirements (IEC 60079-0: 2011, modified)
TS EN 60079-0 Electrical devices - Used in explosive atmospheres - part 0: Equipment - General specifications
TS EN 60079-35-2 Electrical devices - Used in explosive atmospheres - Part 35-2: Headlamps for grizu sensitive mines - Part 2: Other performance and safety considerations
TS EN 60079-10-1 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres (IEC 60079-10-1: 2015 + COR1: 2015)
TS EN 60079-10-2 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dusty environments (IEC 60079-10-2: 2015)
tst EN 50495: 2010 Safety devices for safe operation of equipment against explosion risks
TS EN 60079-25 / AC Electrical devices used in explosive gas environments section 25: Intrinsically safe systems
TS EN 60079-0 / A11 Electrical devices - Used in explosive atmospheres - Part 0: Equipment - General specifications
tst EN ISO / IEC 80079-34 Explosive atmospheres - Part 34: Application of quality systems for equipment production
TS EN 60079-17 Explosive gas atmospheres - Part 17: Inspection and maintenance of electrical installations
TS EN 60079-14 Electrical devices - Used in explosive atmospheres - part 14: Design, selection and installation of electrical installations
tst EN 60079-1 Electrical devices for use in explosive gas atmospheres - Part 1: flameproof enclosures type 'd'
tst EN 60079-2 Electrical equipment for explosive gas atmospheres - Part 2: "p" type pressure receptacles
tst EN 60079-7 Electrical devices in explosive gas environments - part 7: Increased safety “e”
tst EN 60079-11 Explosive gas environments - Part 11 - "i" type self-protected devices
TS EN 60079-29-3 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on the functional safety of stationary gas detection systems
TS EN 60079-31 Electrical devices - Part used in explosive atmospheres 31: Equipment protected against dust ignition by type “t mah housing
TS EN 60079-1 Explosive gas environments - Section 1: Devices protected by flameproof enclosures 'd' type
TS EN ISO 14798: 2013 Lifts, escalators and escalators - Risk assessment and risk reduction
TS EN 60079-0 / A11 Explosive atmospheres - Part 0: Hardware - General rules
tst EN 60079-14 Electrical devices - Used in explosive atmospheres - part 14: Design, selection and installation of electrical installations
TS EN 60079-17 Explosive atmospheres - Part 17: Inspection and maintenance of electrical installations (IEC 60079-17: 2013)
tst EN 60079-29-3 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on the functional safety of stationary gas detection systems
TS EN 60079-31 Explosive atmospheres - Part 31: Equipment protected against dust ignition by type “t mah housing (IEC 60079-31: 2013)
TS EN 60079-26 Electrical appliances - Used in explosive atmospheres - Part 26: Equipment with device protection level (EPL) Ga
TS EN 60079-2 Explosive gas atmospheres - Part 2: Devices protected by "p" type pressure enclosures
TS EN 50223 Constant electrostatic application equipment for flammable flocked materials - Safety regulations
50281-2-1: 1998 / AC: 1999Electrical equipment - Used in combustible dust environments - Part 2-1: Test methods - Methods for determining the lowest ignition temperatures of dust
TS EN 60079-10-2 Explosive atmospheres - Part 10-2: Classification of hazardous areas-Flammable dust atmospheres
TS EN 60079-5 Explosive gas atmospheres - Dust filling Devices protected by "q"
TS EN 60079-18 Electrical devices - Used in explosive atmospheres - part 18: Protection of equipment by encapsulation of type “m”
TS CLC / EN 60079-32-1 Explosive atmospheres - Part 32-1: Electrostatic hazards - Guide
60079-32-2 Explosive atmospheres - Part 32-2: Electrostatic hazards - Tests
TS CLC / EN 60079-33 Explosive atmospheres - Part 33: Electrostatic hazards - Equipment protection with special 's' type protection
TS EN 60079-19: 2011 / A1 Electrical devices - Used in explosive atmospheres - Part 19: Repair, major maintenance and commissioning
TS EN 60079-29-2 Electrical devices - Used in explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
TS EN 60079-2: 2014 / AC Explosive gas atmospheres - Part 2: Devices protected by pressure pans of type "p"
TS EN 50223 Automatic electrostatic application device for flammable materials in flotation - Safety rules
TS EN 60079-28 Electrical devices - Part used in explosive atmospheres 28: Protection of equipment and transmission systems using optical radiation
TS EN 60079-7 Explosive atmospheres - Part 7: Hardware protection with increased safety “e”
TS EN 60079-10-1 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
TS EN 60079-6 Explosive gas atmospheres - Part 6: oil immersion protected devices "o"
TS EN 60079-14 / AC Electrical devices - Used in explosive atmospheres - Part 14: Design, selection and installation of electrical installations
80079-20-2: Explosive atmospheres - Part 2016-20: Material properties - Test methods for combustible powders
80079-36: 2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic methods and specifications
TS EN ISO 80079-37: 2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical structural safety “c”, control of ignition sources “b”, immersion “k” protection type
TS EN 50628 Electrical installation in underground mines
TS EN 13160-1 Leak detection systems - Part 1: General principles
TS EN 13160-2 Leak detection systems - Part 2: Pressure and vacuum systems
TS EN 13160-7 Leak detection systems - Part 7: General rules and test methods for intermediate gaps, leak proof linings and leak proof liners
TS EN 60079-29-1 Electrical devices - Used in explosive atmospheres - Part 29-1: Gas detectors - Performance characteristics of detectors for combustible gases
80079-38 Equipment and components for potentially explosive atmospheres in underground mines
TS EN 60079-30-1 Electrical appliances - Part used in explosive atmospheres 30-1: Electrically resistant underfloor heating - General and test procedure properties
TS EN ISO 10807 Pipeline - Flexible, corrugated, metallic hose assemblies - Used to protect electrical cables in explosive environments
tst EN 50021 Electrical devices for use in potentially explosive atmospheres - Protection class “n”
TS EN 50281-2-1 Electrical equipment - Used in combustible dust environments - Part 2-1: Test methods - Methods for determining the lowest ignition temperatures of dust
Electrical equipment - Used in flammable dust environments - Part 50281-2: Test methods - Methods for determining the lowest ignition temperatures of dust
Specific requirements for the construction, testing and marking of electrical appliances in the hardware group II, category 50284g
TS EN 50381 Portable ventilation rooms with or without internal discharge
TS EN 50381 / AC Portable ventilation rooms with or without internal discharge
TS EN 50394-1 Electrical devices for use in potentially explosive atmospheres - Group I - Intrinsically safe systems - Part 1: Construction and testing
TS EN 50495 Safety devices for safe operation of equipment against explosion risks
TS EN 60079-15 Electrical devices - Used in explosive atmospheres - Part 15: Protection of equipment by type “n koruma protection
TS EN 60079-20-1 Electrical devices - Used in explosive atmospheres - Part 20-1: Material characteristics for gas and vapor classification - Test methods and data
TS EN 60079-29-4 Electrical devices - Used in explosive atmospheres - Part 29-4: Gas detectors - Performance characteristics of open road detectors for combustible gases
TS EN ISO / IEC 80079-34: 2011 Explosive atmospheres - Part 34: Implementation of quality systems for equipment production