We provide testing, auditing and certification services for all of the following standards. We are professional and experienced in all operations.
TS ISO 1771 General purpose thermometers
TS EN 61515 Mineral insulated thermocouple cables and thermocouples
TS EN 13485 Thermometers for measuring air and product temperature for transport, storage and distribution of frozen, frozen, deep-frozen / shock-frozen food and ice-cream - Tests, performance, conformity
TS EN 13486 Temperature recorders and thermometers - Refrigerated, frozen, deep-frozen / fast-frozen food and ice-cream; Used during transport, storage and deployments - Periodic verification
TS EN 13190 Dial thermometers
TS EN 13190 Dial thermometers
TS EN 12470-1 + A1 Clinical thermometers - Part 1: Glass thermometers with metallic liquids - the temperature remains at the highest measured value
TS EN 12470-1 + A1 Clinical thermometers - Part 1: Glass thermometers with metallic liquids - Temperature remains at the highest measured value
TS EN 12470-2 + A1 Clinical thermometers-Section 2: Phase change type (dot matrix) thermometers
TS EN 14597 Temperature controllers and temperature limiters for heat generating systems
TS EN 60584-1 Thermal pairs-Section 1: EMF specifications and tolerances
TS ISO 653Long-rod thermometers - for precision use
TS ISO 654Short rod thermometers - for precision use
TS ISO 655Long housing thermometers for precision use
TS ISO 656 Short tube thermometers with tube housing - for precise use
TS 1934 ISO 651 Thermometers- Block body chlorimeter thermometers
TS 1935 ISO 652 Thermometers - Scale calorimeter thermometers in glass housing
TS ISO 4268 Petroleum and petroleum products - Temperature measurements - Manual methods
TS ISO 4795 for glass-thermometer cups
TS EN 12470-2 + A1 Clinical thermometers-Section 2: Phase change type (dot matrix) thermometers
TS EN 12830 Temperature loggers for refrigerated, deep-frozen / quick-frozen food and ice-cream - Tests, performance, suitability
TS EN 13485 Thermometers - Refrigerated, frozen, deep-frozen / fast-frozen food and ice-cream; Used to measure air and product temperatures during transport, storage and distribution - tests, performance, suitability
TS EN 13486 Temperature recorders and thermometers - Refrigerated, frozen, deep-frozen / fast-frozen food and ice-cream; Used during transport, storage and deployments - Periodic verification
TS EN 50212 Connectors for thermal electric refineries
TS EN 61788-9 Superconductivity - part 9: Measurements for high temperature solid superconductors - retained flux density of large grain oxidized superconductors
TS EN 61557-1 Electrical safety in low voltage distribution systems - Up to 1 kv aa and 1,5 kv d.a - Equipment for testing, measuring or monitoring protective devices - Part 10: Testing, measuring and monitoring protective devices
TS EN 61557-2 Electrical safety in low voltage distribution systems - Equipment for testing, measuring or monitoring protective devices up to 1kv aa and 1,5 kv d.a - Part 2: Insulation resistance
TS EN 61557-3 Electrical safety in low voltage distribution systems - up to 1 kv aa and 1,5 kv - Equipment for testing, measuring, or monitoring protective devices - Part 3: Loop impedance
TS EN 61557-4 Electrical safety in low voltage distribution systems - up to 1 kv aa and 1,5 kv da - Equipment for testing, measuring or monitoring protective devices - Part 4: Ground connection and equipotential bonding resistance
TS EN 61557-5 Electrical safety in low voltage distribution systems - up to 1 kv 'aa and 1,5 kv' - Equipment for testing, measuring or monitoring protective devices - Part 5: Resistance to earth
TS EN 61557-7 Electrical safety in low voltage distribution systems-Up to 1 kv AA and 1.5 kv DA-Equipment for testing, measuring or monitoring protective devices-Section 7: Phase sequence
TS EN 50400 The basic standard for demonstrating the suitability of the fixed device for radio transmission (110 mhz - 40 ghz) intended for use in radio telecommunications networks with reference levels or basic restrictions on public exposure to radiofrequency electromagnetic fields when commissioned
TS EN 62025-1 High-frequency inductive sieves - Non-electrical properties and measuring methods - Part 1: Fixed, surface-mounted coils for use in electronic and telecommunications equipment
TS EN 50482 Measuring transformers - 52 phase inductive voltage transformers up to Um, 3 kv
TS EN 60404-5 Magnetic materials - Part 5: Permanent magnetic (magnetically hard) materials - Method for measuring magnetic properties
TS EN 61557-6 Electrical safety in low voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 6: Efficiency of residual current devices (rcd) in Tt, tn and it systems
Electrical safety in low voltage distribution systems - up to 61557 v aa and 1 v - Equipment for testing, measuring or monitoring protective devices - Part 1000: General features
TS EN 61557-2 Electrical safety in low-voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 2: Insulation resistance
TS EN 61557-3 Electrical safety in low-voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 3: Loop impedance
TS EN 61557-4 Electrical safety in low voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 4: Resistance of earth connection and equipotential bonding
TS EN 61557-5 Electrical safety in low voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 5: Resistance to earth
TS EN 61557-6 Electrical safety in low-voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 6: Efficiency of residual current devices in Tt, tn and it systems
TS EN 61557-7 Electrical safety in low voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 7: Phase sequence
TS EN 61557-12 Electrical safety in low voltage distribution systems - up to 1 kv aa and 1,5 kv d.a - Equipment for testing, measuring or monitoring protective devices - Part 10: Performance measurement and monitoring devices
TS EN 80000-6 Quantities and units - Part 6: Electromagnetism
TS 4492 EN 60404-4 / A2 Magnetic materials - Part 4: Methods for measuring magnetic properties of magnetic soft materials in direct current
TS EN 61869-1 Measuring transformers - Part 1: General requirements
TS 4490 EN 60404-2 / A1 Magnetic materials - Part 2: Methods for measuring the magnetic properties of electrical steel sheets and strips through the epstein frame
TS EN 62501 Voltage supply converter (vsc) valves - For high voltage direct current (hvdc) power transmission - Electrical test
TS EN 61869-1 Measuring transformers - Part 1: General requirements
TS EN 61557-11 Electrical safety in low voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 11: Type a and type b performance measurement in Tt, tn and it systems and monitoring layouts (RCMS)
60404 - 4 / A2 Magnetic materials - Part 4: Methods for measuring magnetic properties of magnetic soft materials in direct current.
TS EN 60404-2 / A1 Magnetic materials - Part 2: Methods for measuring the magnetic properties of electrical steel sheets and strips through the epstein frame
TS EN 62058-11 Electrical meters (aa) - Acceptance inspection - Part 11: General acceptance inspection methods
tst EN 62058-21 Electrical measuring instrument (aa) - Acceptance inspection - Part 21: Particular requirements for active energy for electromechanical meters
TS EN 62058-11 Electrical meters (aa) - Acceptance inspection - Part 11: General acceptance inspection methods
TS EN 62058-11 Electrical meters (aa) - Acceptance inspection - Part 11: General acceptance inspection methods
TS EN 62058-21: 2010Electric meters (ac) -Inspection inspection-Part 21: Particular requirements for electromechanical meters for active energy (class 0,5,1 and 2 and class a and b indexes)
TS EN 62058-31 Electrical meters (aa) - Acceptance inspection - Part 11: Particular requirements for static meters for active energy (class 0,2 s, 0,5 s, 1 and 2 and class indexes a, b and c)
TS EN 50383 Basic standard for measuring and calculating field strength and winding values for people exposed to electromagnetic fields emitted by radio base stations and fixed terminal stations in radio telecommunications (110 mhz - 40 ghz) systems
TS EN 50445 Product family standard to demonstrate that the equipment used for resistance welding, arc welding and similar operations complies with the basic restrictions on people exposed to electromagnetic fields (0 Hz to 300 GHz)
TS EN 60060-1 High voltage test techniques - part 1: General recipes and test rules
TS EN 62058-31 Electrical meters (aa) - Acceptance inspection - section 31: Static meters - For active energy - Special rules (class 0,2 s, 0,5 s, 1 s and 2 and class indices a, b, c)
TS EN 61557-13 Electrical safety in low-voltage distribution systems - up to 1000 v aa and 1500 v d.a - Testing, measuring or monitoring of protective devices - Part 13: Hand-held or actuated for leakage current measurements in electrical distribution systems current clamps and sensors
tst EN 55016-4-2 Standard and feature of immunity measuring apparatus and methods for radio disturbance - Part 4-2: Uncertainties, statistics and limit value modeling - Uncertainty in Emu measurements
TS EN 61869-3 Measuring transformers - Part 3: Additional requirements for inductive voltage transformers
TS EN 61869-5 Measuring transformers - Part 5: Additional requirements for voltage transformers with capacitors
TS EN 61869-5 Measuring transformers - Part 5: Additional features for capacitor voltage transformers
TS EN 61869-3 Measuring transformers - Part 3: Additional features for inductive voltage transformers
TS EN 50401: 2006 / A1 When operating wireless networks with basic limitations or reference levels relating to radio frequency electromagnetic fields to which the public is exposed; Product standard for the suitability of fixed devices used in radio communication (110 mhz - 40 ghz)
TS EN 50492 Basic standard for in situ measurement of human exposure to electromagnetic field near base stations
TS EN 62562 Cavity resonator method for measuring the complex permeability of low loss dielectric plates
TS EN 60865-1 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
TS EN 61340-4-4 Electrostatic - Part 4-4: Standard test methods for special applications - Flexible medium size bag
TS EN 60060-2 High voltage test techniques - Part 2: Measuring systems
TS EN 60567: 2011 (EN) Oils for electrical equipment - Oil and gas sampling guide for dissolved and free gas analysis
TS EN 62059-32-1 Electrical measuring equipment - Dependency - Section 32-1: Durability - Stability test of metrological characteristics by applying elevated temperature
TS EN 62442-1 / AC Energy performance of the lamp control device - Part 1: Control device for flood lamps - Measurement method for the determination of total input power of control device circuits and the effectiveness of the control device
TS IEC 60050-131 International Electrotechnical Glossary - Part 131: Circuit Theory
TS EN 61788-13Super conductivity - Part 13: aa loss measurements - Magnet meter methods for hysteresis losses in multi-filament Cu / Nb-Ti compounds
TS EN 50400: 2006 / A1 The basic standard for the transmission of radio equipment (110 MHz - 40 GHz) which is intended for use at public reference levels exposed to radio-frequency electromagnetic fields or with basic restrictions when commissioned (XNUMX MHz - XNUMX GHz)
TS EN 60404-15: 2012Magnetic materials - Part 15: Methods for the determination of relative magnetic permeability of weak magnetic materials
Electrical and magnetic field levels produced by TS EN 62110 Aa power systems - Measurement process related to public exposure levels
TS EN 61869-2 Measuring transformers - Part 2: Additional requirements for current transformers
TS ISO 8061 Alpine ski bindings - selection of version torque values
TS ISO 8061 / A1Alp ski bindings - selection of version torque values - Modified 1
TS EN 60688 Aa electrical measuring transducers that convert electrical quantities to analog or digital signals
TS EN 62226-3-1 Exposure to electrical and magnetic fields in the low and intermediate frequency range - Induced current density in the human body and methods of calculating the internal electric field - Part 3-1: Exposure to electrons -Analytic and 2D numerical models
TS EN 61788-16 Superconductivity - Part 16: Electronic characteristic measurements - Power dependent surface resistance of superconductors at microwave frequencies
TS EN 61788-17Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and distribution in large area superconducting films
TS EN 60404-11 Magnetic materials - Part 11: Test method for determining the surface insulation resistance of magnetic sheets and strips
TS EN 61788-8 Superconductivity - Part 8: Aa loss measurement - Measurement of round superconducting wires exposed to transverse magnetic field at liquid helium temperature by sensing coil method
TS EN 61326-1 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 1: General requirements
TS EN 61326-2-1 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-1: Special requirements - Performance criteria, test configurations and operating conditions for precision test equipment for applications that are vulnerable to emu
TS EN 61326-2-2Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-2: Special requirements - Performance criteria, test configurations and operating conditions for portable tester, measuring device and monitoring device used in low voltage distribution systems
Electrical equipment for measuring, control and laboratory use - Emu requirements - Part 61326-2: Special requirements - Performance criteria, test configurations and operating conditions for integrated or remote signal conditioning transducers
TS EN 61326-2-4 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-4: Special requirements - Iec for insulation fault location according to 61557-9 and device for insulation monitoring device according to 61557-8 Experiment configuration, working conditions and performance criteria
TS EN 61326-2-5BElectrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-5: Special requirements - Performance criteria for field devices with interfaces to IEC 61784-1, cp 3 / 2, test configurations and work conditions
TS EN 61061-2 + AElectric non-impregnated pressed sheet wood - Part 2: Test methods
TS EN 61061-3-2 Non-impregnated pressed board for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Ring made of beech veneer
TS EN 50383 / AC Basic standard for measuring and calculating field strength and SAR values for people exposed to electromagnetic fields emitted by radio base stations and fixed terminal stations in radio telecommunications (110 MHz to 40 GHz) systems
TS EN 61557-14 Electrical safety in low voltage distribution systems - up to 1000 v aa and 1500 v da - Equipment for testing, measuring or monitoring protective devices - Part 14: Equipment for testing electrical safety of machinery.
TS EN 61557-10 Electrical safety in low voltage distribution systems - up to 1 kv aa and 1,5 kv d.a - Testing, measuring or monitoring protective devices - Part 10: Combined measuring equipment for testing, measuring and monitoring protective devices 18.12.2013
X NUMX: Evaluation of the software used for the determination of the impulse waveforms
TS EN 60469 Transient regimes, pulses and related waveforms - Terms, descriptions and algorithms
TS EN 61326-2-6 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Special requirements - IVD medical equipment
TS EN 50492 / A1 Basic standard for in situ measurement of human exposure to electromagnetic fields near base stations
TS EN 60243-2 Electrical resistance of insulating materials - Test methods - Part 2: Additional rules for tests using direct current voltage
TS EN 60243-3 Electrical resistance of insulating materials - Test methods - Part 3: Additional requirements for 1,2 / 50 µs impact voltage
TS EN 61786-1 Measuring AC electric fields and AC magnetic fields and DC magnetic fields from 1Hz to 100 kHz to which people are exposed - Part 1: Guidelines for measuring instruments
TS EN 62056-3-1 Electrical measurements - Information exchange for reading schedules or load control - Part 3-1- Use of local area network on twisted fence with carrier marking
TS EN 62586-1 Measurement of power quality in power supply systems - Part 1: Power quality equipment (PQI)
TS EN 62586-2 Measurement of power quality in power supply systems - Part 2: Functional tests and uncertainty rules
TS EN 61869-4 Measuring transformers - Part 4: Additional requirements for combined transformers
TS EN 60247 Insulating fluids - Determination of relative permeability, dielectric reduction factor (tan?) And direct current (dc) resistivity
tst EN 61869-2 Measuring transformers - Part 2: Additional requirements for current transformers (IEC 61869-2: 2012)
tst EN 61869-4 Measuring transformers - Part 4: Additional requirements for combined transformers (IEC 61869-4: 2013)
TS EN 62056-7-6 Electrical measurement - Data exchange for meter reading, tariff and load monitoring - DLMS / COSEM layer - Part 7 - 6: 3 layered, connection-oriented, HDLC-based profile
TS EN 62056-7-6 Electricity meter data exchange - DLMS / COSEM package - Part 7 – 6: 3 layered, connection-oriented HDLC-based communication profile (IEC 62056-7-6: 2013)
TS EN 62056-9-7 Electricity meter data exchange - DLMS / COSEM package - Part 9 - 7: Communication profile for TCP-UDP / IP networks (IEC 62056-9-7: 2013)
tst EN 60243-2 Electrical resistance of insulating materials - Test methods - Part 2: Additional rules for tests using direct current voltage
tst EN 60243-3 Electrical resistance of insulating materials - Test methods - Part 3: Additional requirements for 1,2 / 50 darbes impact voltage
tst EN 61788-5 Superconductivity - part 5: Measurement of the volumetric ratio of matrix to superconductor - Volumetric ratio of copper to superconductor in Cu / nb-Ti compound superconductors
TS EN 62053-24 Electrical measuring equipment (aa) - Particular requirements - Part 24: Static meters for reactive energy at basic frequency (classes 0,5 S, 1 S and 1)
TS EN 80000-6 Sizes and units - Part 6: Electromagnetism
TS EN 61557-8 Electrical safety in low voltage distribution systems - up to 1 kv aa and 1,5 kv d.a - Test equipment for testing, measuring or monitoring protective devices - Part 8: Insulation control devices for IT systems
TS EN 60666 Determination and determination of certain additives in mineral insulating oils
TS EN 61788-21 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General specifications and guidance
TS EN 62056-1-0 Electricity meter data exchange - DLMS / COSEM layer - Intelligent meter standardization structure (IEC 62056-1-0: 2014)
TS EN 62442-1 / tst AC Energy performance of the lamp control device - Part 1: Control device for fluorescent lamps - Measurement method for the determination of the total input power of the control device circuits and the effectiveness of the control device
TS EN 61869-4 / AC Measuring transformers - Part 4: Additional requirements for combined transformers
TS EN 61869-4 / tst AC Meter transformers - Part 4: Additional requirements for combined transformers
TS EN 61251 Electrical insulation materials and systems - aa tensile strength rating24.03.2016
TS EN 62631-3-2 Dielectric and resistivity properties of solid electrical insulation materials - Part 3-2: Determination of resistance properties (also methods) - Surface resistance and surface resistivity
TS EN 60599 Electrical devices in use filled with mineral oil - Guide to the use of the results of the determination of dissolved and free gases in the evaluation of the condition of the device
TS EN 61340-4-6 Electrostatic - Part 4-6: Standard test methods for specific applications - Wristbands
TS EN 61340-5-3 Electrostatic-Part 5-3: Protection of electronic devices from electrostatic effect - Specification and classification for electrostatic discharge precision devices
TS EN 61340-2-1 Electrostatic - Part 2-1: Measurement methods - the ability to distribute the static charge of materials and products
TS EN 61869-5 / AC Measuring transformers - Part 5: Additional requirements for voltage transformers with capacitors
TS EN 61869-5 / AC Dimension transformers - Part 5: Additional requirements for voltage transformers with capacitors (IEC 61869-5: 2011 / Correction1: 2015)
TS EN 62631-3-3 Resistive properties of dielectric and solid insulation materials - Part 3-3: determination of resistive properties (DC Methods) - Insulation resistance
TS EN 61557-8 / AC Electrical safety in low voltage distribution systems - up to 1 kv aa and 1,5 kv d.a - Test equipment for testing, measuring or monitoring protective devices - Part 8: Insulation control devices for IT systems
TS EN 62631-3-1 Resistive properties of dielectric and solid insulation materials - Part 3-1: determination of resistive properties (DC methods) - Skin resistance and volume resistance - General method 09.12.2016
TS EN 60909-0 Short-circuit currents in three-phase aa systems - part 0: Calculation of currents
TS EN 60990 Measurement methods of touch current and protective conductor current
TS EN 61340-4-9 Electrostatic - Part 4-9: Standard test methods for special applications - Garments
TS EN 61340-2-3 Electrostatic Section 2-3: Test methods for determining the resistance and resistivity of hard planar material used to avoid electrostatic charge accumulation
TS EN 61869-6 Measuring transformers - Part 6: Additional general requirements for low-power measuring transformers
TS EN 62056-4-7 Electrical measurement data exchange - DLMS / COSEM package - Part 4-7: DLMS / COSEM transfer layer for IP networks
TS EN 62056-5-3 Electrical measurement data exchange - DLMS / COSEM package - Part 5-3: DLMS / COSEM application layer
TS EN 62056-6-1 Electrical measurement data exchange - DLMS / COSEM package - Part 6-1: Object Identification System (OBIS)
TS EN 62056-6-2 Electrical measurement data exchange - DLMS / COSEM package - Part 6-2: COSEM interface classes
TS EN 62056-7-5 Electrical measurement data exchange - DLMS / COSEM package - Part 7-5: Local data transfer profiles (LN) for Local Area Networks
TS EN 62689-1 Current and voltage sensors or detectors for fault indication - Part 1: General principles and requirements
TS EN 62226-3-1 / A1 Exposure to electrical and magnetic fields in the low and intermediate frequency range - Induced current density in the human body and methods of calculating the internal electric field - Part 3-1: Exposure to electrical fields -Analytic and 2D numerical models
TS EN 62053-21 / A1 Electrical measuring equipment (aa) - Special requirements - Part 21: Static meters for active energy (Class 1 and class 2)
TS EN 62053-22 / A1 Electrical measuring equipment (aa) - Special requirements - Part 22: Static meters - For active energy (class 0,2 s and class 0,5 s)
TS EN 62053-11 / A1 Electrical measuring equipment (aa) - Special requirements - Part 11: Electromechanical meters for measuring active energy (class 0,5 - class 1 and class 2)
TS EN 62052-11 / A1 Electrical measuring equipment (aa) - General requirements, tests and test conditions - Part 11: Measuring equipment
TS EN 62053-23 / A1 Electrical measuring equipment (aa) - Specific requirements - Part 23: Static meters for measuring reactive energy (class 2 and class 3)
TS EN 62053-24 / A1 Electrical measuring equipment (aa) - Specific requirements - Part 24: Static meters for measuring reactive energy at the basic frequency - (class 0,5 S, class 1 S and class 1)
TS EN 60404-15: 2012 / A1 Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of weak magnetic materials
TS EN 60359 Electrical and electronic measuring equipment - Expressing performance
TS 5275 EN 60372 Locking devices for ball and socket connections of chain insulator units - Dimensions and tests
TS EN ISO 15350 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after burning in an induction furnace (routine method)
TS EN 50123-7-2 Railway applications - Stationary installations - Da switching equipment - Part 7-2: Measuring, control and protection devices for special uses in draw frames - Isolating current converters and other current measuring devices
TS EN 50147-1 Anechoic chambers - Part 1: Measuring screen attenuation
TS EN 50147-2 Anechoic chambers - Part 2: Alternative test site suitability for site attenuation
TS EN 50191: 2010 Installation and operation of electrical test equipment
TS EN 50249 Electromagnetic locators for buried pipes and cables - Performance and safety
TS EN 50294 Lamps - Method for measuring total input power in ballast / lamp circuits
TS EN 50294 / A2 Lamps - Method for measuring total input power in ballast / lamp circuits
TS EN 50366 / IS1 Domestic and household electrical appliances - Electromagnetic fields - Assessment and measurement methods
TS EN 50366 / tst IS1 Electrical appliances for household and similar use - Electromagnetic fields - Assessment and measurement methods
TS EN 50400: 2006 / AC: 2011 When wireless communication networks are operated which have basic limitations or reference levels for radio frequency electromagnetic fields to which the public is exposed; Basic standard for the suitability of fixed devices used in radio communications (110 mhz - 40 ghz)
TS EN 50400 When wireless communication networks with basic limitations or reference levels for radio frequency electromagnetic fields to which the public is exposed are operated; Basic standard for the suitability of fixed devices used in radio communications (110 mhz - 40 ghz)
TS EN 50420 Basic standard for the assessment of human exposure to electromagnetic fields from a stand-alone broadcast transmitter (30 mhz - 40 ghz)
TS EN 50421 Product standard (30 mhz - 40 ghz) for demonstrating the suitability of broadcast transmitters with basic restrictions or reference levels in relation to human exposure to radiofrequency electromagnetic fields
TS EN 55016-2-4 Standard and specification for radio disturbance and methods and methods for measuring immunity - Part 2-4: Methods for measuring disturbance and immunity - Immunity measurements
TS EN 60044-7 Measuring transformers - Part 7: Electronic voltage measuring transformers
TS EN 60059 Iec standard current rating
TS EN 60059 / A1 Iec standard current rating values
TS EN 60085: 2008 Electrical insulation - Thermal evaluation and demonstration
TS EN 60085 Electrical insulation - Thermal evaluation and demonstration
TS EN 60216-2 Electrical insulation materials - Thermal resistance properties - Part 2: Determination of thermal resistance properties of electrical insulation materials - Selection of test criteria
TS EN 60375 Rules for electrical and magnetic circuits
TS EN 60404-6 Magnetic materials - Part 6: Method of measuring the magnetic properties of magnetically soft metal and powder materials using frequencies in the range 20 hz to 200 khz using ring samples
TS EN 60404-13 Magnetic materials - Part 13: Electrical loading factor, density and resistance measurement methods of electrical steel sheets and strips
TS EN 60454-2 Insulating tapes for electrical purposes - Pressure sensitive adhesive tapes - Part 2: Test methods
TS EN 60587 Electrical insulation materials - Used in heavy ambient conditions - Test methods for the evaluation of resistance to surface leakage and abrasion
TS EN 60909-3 Short-circuit currents in three-phase aa systems - Part 3: Currents during two separate line earth short circuits and partial circuit currents flowing to earth
TS EN 60970 Insulating liquids - Particle counting and sizing methods
TS EN 61115 Expressing sampling performance for process analyzers
TS EN 61243-1 / A1 Operating under voltage - Voltage detectors - Part 1: Capacitive type used for voltages exceeding 1 kv a.a
TS EN 61340-3-1 Electrostatic- Part 3-1: Methods for simulation of electrostatic effects- Human body model (hbm) electrostatic discharge test waveforms
TS EN 61340-3-2 Electrical measuring - Data exchange for clock reading, tariff and load control - Part 53: Cosem application layer
TS EN 61340-4-1 Electrostatic - Part 4-4: Standard test methods for special applications - Electrostatic classification of containers with flexible intermediate volume
TS EN 61340-4-5 Electrostatic - Part 4-5: Standard test methods for special applications - Combined sole coating and methods for determining the electrostatic protection of footwear
TS EN 61788-3 Superconductivity section 3: Critical current measurement ag- Sheated bi-2212 and bi-2223 oxide superconducting critical current
TS EN 62004 Heat resistant aluminum alloy wire for air rope conductors
TS EN 62053-21 / T1 Electrical measuring equipment (aa) - Special requirements - Part 21: Static meters - For active energy (class 1 and class 2)
TS EN 62226-1 Exposure to electric and magnetic fields in the low and intermediate frequency range - Induced current density in the human body and methods of calculating the internal electric field - Part 1: General "
TS EN 62226-2-1 Exposure to electrical and magnetic fields in the low and intermediate frequency range - Induced current density in the human body and methods of calculating the internal electric field - Part 2-1: Exposure to magnetic fields - 2b models "
TS EN 62428 Electrical power engineering - Modal components in three phase aa systems - Sizes and transformation