Our company provides internationally approved and accredited testing, inspection and inspection services to the following standards.
TS EN 24869-1 Acoustics - Ear protectors - Part 1: A subjective method for measuring sound insulation
TS EN 24869-1 Acoustics - Ear protectors - Part 1: A subjective method for measuring sound insulation
TS 8117 EN 60118-0 Hearing aids section 0: Measurement methods for electroacoustic characteristics
TS EN 27574-1 Acoustics - Statistical methods for determining and verifying the specified noise emission values of machinery and equipment - Part 1: General rules and descriptions
TS EN 27574-2 Acoustics - Statistical methods for determining and validating specified noise emission values of machinery and equipment - Part 2: Methods for declared values of each machine
TS EN 27574-3 Acoustics - Statistical methods for detecting and verifying specified lignum emission values of machinery and equipment - Part 3: A simple transition method for determining specified values in relation to lots of machines
TS EN 27574-4 Acoustics - Statistical methods for determining and verifying the specified noise emission values of machinery and equipment - Part 4: Methods for specified values in relation to machine lots
TS EN 29053 Determination of air flow resistance of materials for acoustic-acoustic applications
TS EN 61206 Ultrasound-Continuous wave doppler sratems-Test methods
TS prEN 255-7 Heat pumps, driven by electric energy-Compressor-operated-Part7: Heat pumps and heat pumps used to prepare domestic hot water -Measurement of air-borne noise-Determination of sound power level
TS 6658 EN 60118-2 Hearing aids-Section 2: Hearing aids with automatic gain control circuit
TS 8065 EN 60118-1 Hearing aids-Section 1: Induction pickup coil hearing aids
TS EN 1793-3 Road traffic noise reduction systems - Test method for the determination of acoustic performance - Part 3: Normalized traffic noise spectrum
TS EN ISO 14163 Acoustic - noise control guide with silencers
TS EN 60942 Electroacoustic - Sound calibrators
TS EN 1746 Safety in machinery - Guidance on the preparation of noise-related substances of safety standards
TS EN ISO 10534-1 Acoustic- Sound absorption coefficient and impedance determination in impedance pipes - Part 1: Method of using the standing wave ratio
TS EN ISO 11819-1 Acoustics - Measurement of the effect of road surfaces on traffic noise - Part 1: Statistical crossing method
TS EN ISO 11688-2 Acoustics - Recommended practice for low noise machine and equipment design - Part 2: Introduction to low noise design physics
TS EN ISO 3822-3 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN ISO 9902-3 Textile machinery - Noise test code - Part 3: Machines used on nonwovens
TS EN ISO 9902-4 Textile machinery - Noise test code - Part 4: Filling and sample preparation machines
TS EN ISO 9902-5 Textile machinery - Noise test code - Part 5: Weaving and knitting pretreatment machines
TS EN ISO 9902-6 Textile machines- Noise test code section 6: Fabric weaving machines
TS EN ISO 9902-7 Textile machinery - Noise test code section 7: Dyeing and finishing machines
TS EN ISO 11674 Ships and marine technology - Gap control systems
TS EN ISO 11819-1 Acoustics - Measurement of the effect of road surfaces on traffic noise - Part 1: Statistical crossing method
TS EN ISO 9902-1 Textile machinery - Noise test code - Part 1: Common features
TS EN ISO 9902-2 Textile machinery - Noise test code - Part 2: Ring spinning preparation machines and ring spinning machines
TS 9595-1 EN 60645-1 Electroacoustic - Hearing aids - Part 1: Pure tone audiometers
TS EN ISO 3822-1 Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 1: Measurement method
TS EN 60704-2-11 Household and similar electrical appliances - Test code for the determination of acoustic noise in aircraft - Part 2-11: Particular requirements for electrically operated food preparation devices
TS EN ISO 14257 Measurement and parametric description of spatial sound distribution curves in study rooms for the evaluation of acoustic-acoustic performances
TS EN 61842 Microphones and headsets for speech transmission
TS EN ISO 10846-3 Acoustic and vibration-Measurement of vibroacoustic transmission properties of flexible elements in the laboratory-Part 3: Indirect method for the determination of the dynamic rigidity of flexible supports for displacement motion
TS EN ISO 11904-1 Acoustics - Determination of sound pollution from sound sources placed close to the ear - Part 1: Technique using the microphone placed in the real ear (myr technique)
TS EN 60749-16 "semiconductor devices - Mechanical and climatic test methods - part 16: Particle impact noise detection (PIND)"
ISO EN ISO 10846-4 Acoustics and vibration - Measurement of vibroacoustic transmission properties of flexible elements in the laboratory - Part 4: Dynamic rigidity of elements other than flexible supports for translational movements
TS EN 60942 Electroacoustic - Sound calibrators
TS EN ISO 13473-1 Defining the coating texture - Using surface profiles - Part 1: Determination of the average profile depth
TS EN ISO 16032 Acoustics - Measurement of Sound Pressure Level in Service Equipment in Buildings - Engineering Method
ISO EN ISO 11904-2 Acoustics - Determination of sound pollution from sound sources placed close to the ear - Part 2: Technique using a dummy
TS ISO 4412-1 Hydraulic fluid power-Test code for the determination of airborne noise level section 1: Pumps
TS ISO 4412-2 Hydraulic fluid power-Test code for the determination of airborne noise level section 2: Engines
TS ISO 4412-3 Hydraulic fluid power - Test code for the determination of airborne noise level section 1: Pumps - Method with parallel array microphone
TS EN 60034-9 Rotary electric machines - Part 9: Noise limits
TS EN 60034-9 Rotary electrical machines part 9: Noise limits
TS EN 60704-2-3 Test code for the determination of airborne noise from electrical appliances used in households and similar places section 2-3: Particular requirements for dishwashers
TS EN ISO 17201-1 Acoustics - Noise from gunshots - Detection of explosion in the mouth by measurement
TS EN ISO 3740 Acoustic-Determination of sound power levels of noise sources-Guidance for the use of basic standards
TS EN 60118-7 Electroacoustic - Hearing aids - part 7: Measurement of performance characteristics of hearing aids for quality assurance purposes in production, supply and distribution
TS EN ISO 17201-4 Acoustics-Noise from firing areas-Part 4: Estimation of sound in orbit
TS EN ISO 17201-2 Acoustics-Noise from firing areas-Section 2: Leaving barrel and orbiting
TS EN 61043 Electroacoustic - Instruments used for measuring sound intensity - Measuring with pressure sensitive microphone pairs
TS EN ISO 11904-1 Acoustics - Determination of sound from sound sources placed close to the ear - Part 1: Technique of using a microphone in a real ear (myrrh technique)
TS EN ISO 17201-1 Acoustics - Noise in shooting areas - Part 1: Measurement and determination of explosion noise at the barrel opening
TS EN ISO 17201-2 Acoustics - Noise in firing range - Part 2: Calculation of noise and projectile noise at the barrel opening
TS ISO 1996-2 Acoustics - Description, measurement and evaluation of environmental noise - Part 2: Determination of environmental noise levels
TS EN 1501-4 Garbage collection vehicles and associated lifting equipment-General requirements and safety requirements-Section 4: Noise test code for garbage collection vehicles
TS EN 62127-1 Ultrasonic-Hydrophones-Section 1: Identification and measurement of medical ultrasonic fields up to 40 mhz
TS EN 62127-2 Ultrasonic-Hydrophones-Section 2: Calibration of ultrasonic fields up to 40 MHz
TS EN 62127-3 Ultrasonic-Hydrophones-Section 3: Features of hydrophones in medical ultrasonic fields up to 40 mhz
TS EN 60034-9 / A1 Rotary electric machines - Part 9: Noise limits
TS EN ISO 10846-1 Acoustics and vibration - Laboratory measurement of vibroacoustic transfer properties of elastic elements - Part 1: Principles and guidelines
TS EN 12053 + A1 Safety of industrial cargo vehicles - Test methods for the measurement of noise emissions
TS EN 12549 + A1 Acoustic- Determination of noise for upholsterer guns - Test - Engineering test
TS EN 60318-5 Electroacoustic-Human head and ear simulator-Part 5: Coupler for measuring headphones and hearing aids coupled to the ear with instruments worn on the ear 2 cm <(hoch) 3>
TS EN ISO 2151 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (degree 2) "
TS EN ISO 3822-1 / A1Acoustic- Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 1: Measurement method
TS EN ISO 9902-2 / A1Textile machines - Noise test code - Part 2: Spinning preparation and spinning machines
TS EN ISO 9902-3 / A1 Textile machinery - Noise test code - Part 3: Nonwovens (ISO 9902-3: 2001 / Amd 1: 2009)
TS EN ISO 9902-4 / A1 Textile machinery - Noise test code - Part 4: Yarn processing, rope and rope manufacturing machines (ISO 9902-4: 2001 / Amd 1: 2009)
TS EN ISO 9902-5 / A1Textile machines - Noise test code - Part 5: weaving and knitting preparation machines
Textile machinery - Noise test code - Part 9902: Fabric production machinery (ISO 6-2001: 1 / Amn 6: 9902)
TS EN ISO 17201-1 / AC Acoustics - Noise in the firing range - Part 1: Measuring and determining the barrel pressure
TS EN ISO 22868 Forest and horticultural machinery - Noise test code for hand-held machines with internal combustion engines - engineering method (accuracy 2)
ISO EN ISO 9614-1 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at different points
TS EN ISO 9614-3 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measuring by scanning
TS EN ISO 11201 Acoustics - Noise from machinery and equipment - Determination of emission sound pressure levels on a reflective plane, mainly at an open area and at other specified locations, with negligible environmental corrections
TS EN ISO 11202 Acoustics - Noise from machinery and equipment - Determination of emission sound pressure levels at a workstation and other specified locations with similar environmental corrections
TS EN ISO 11204 Acoustics - Noise from machinery and equipment - Determination of emission sound pressure levels at a workstation and at other specified locations with correct environmental correction applied
TS EN ISO 11546-2 Acoustics - Determination of sound insulation performance of enclosures - part 2: On-site measurements (for acceptance and verification purposes)
TS EN ISO 11688-1 Acoustics - Recommended application for the design of machinery and equipment with low noise level - Part 1: Planning
TS EN ISO 12001 Acoustics - Noise from machinery and equipment - Rules for the preparation and presentation of a noise test code draft
TS EN ISO 3822-3 / A1Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 1265 + A1 Noise test rules for foundry machinery and equipment
TS EN 12545 + A1 Machinery for the manufacture of footwear, leather and artificial leather articles - Noise test code - General rules
TS EN ISO 9902-7 / A1Textile machines - Noise test code - Section 7: Dyeing and finishing machines
TS EN ISO 9902-6 / A1Textile machines - Noise test code - Part 6: Fabric production machinery
TS EN ISO 9902-5 / A1Textile machines - Noise test code - Part 5: Weaving and knitting preparation machines
TS EN ISO 9902-4 / A1Textile machines - Noise test code - Section 4: Yarn processing, rope and rope manufacturing machines
TS EN ISO 9902-3 / A1Textile machines - Noise test code - Part 3: Nonwovens
TS EN ISO 9902-2 / A1Textile machines - Noise test code - Part 2: Spinning preparation and spinning machines
TS EN ISO 9902-1 / A1Textile machines - Noise test code - Section 1: General rules
TS EN ISO 3822-1 / A1Acoustic - Laboratory tests of noise emitted from devices and instruments used in water supply facilities - Part 1: Measurement method - Amendment 1: Measurement uncertainty
TS EN ISO 9614-3 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measuring by scanning
TS EN ISO 11203 Acoustics - Noise emitted by machinery and equipment - Determination of sound pressure level emitted from a workplace and other specified locations by sound power level
TS EN ISO 11546-1 Determination of sound insulation performance of acoustic enclosures part 1: Measurements in laboratory conditions (for notification purposes)
TS EN ISO 11546-2 Determination of acoustic-soundproofing performance of enclosures part 2: On-site measurements (for acceptance and verification purposes)
TS EN ISO 11688-1 Acoustics - Recommended practice for the design of machinery and equipment with low noise levels - Part 1: Planning
TS EN ISO 11957 Acoustics - Determination of sound insulation performance of cabinets - Laboratory and on-site measurements
TS EN ISO 3822-3 / A1Acoustics - Laboratory tests of noise emissions from devices and equipment used in water supply facilities - Part 3: Installation and operating conditions for valves and devices on a line
TS EN 60704-2-2 Acoustic noise - Test code for the determination of airborne acoustic noise from electrical appliances used in households and similar places section 2-2: Particular requirements for fan heaters
TS EN ISO 11204 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a workstation and other specified locations - Method requiring environmental corrections
TS EN ISO 10052 / A1 Acoustics - Measurement of sound and impact sound insulation and equipment sound on site - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN 62489-1 Electroacoustic - Sound frequency induction circuit systems for assisted hearing - Part 1: Performance characteristics and measurement methods of system components
TS EN ISO 20361 / ACLiquid pumps and pump units-Noise test code-Accuracy class 2 and accuracy class 3
TS EN ISO 3743-1 Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, mobile welds in resonant chambers section 1: Comparison method for hard-walled test rooms
TS EN ISO 3744 Acoustics - Determination of sound power levels and sound pressure levels of noise sources using sound pressure - Engineering methods applied mainly in a free field on a reflective plane
TS EN ISO 3741 Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for ringing chambers
TS EN ISO 7779 Acoustics - Measurement of airborne noise from information technology and communication equipment
TS EN 1501-4 Garbage collection vehicles and associated lifting vehicles - General requirements and safety requirements - Part 4: Noise test code for garbage collection vehicles
TS EN ISO 3747 Acoustic - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Onsite engineering / observation method in the resonant environment
TS EN ISO 22868 Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (degree 2 accuracy)
TS EN ISO 17071 Leather - Physical and mechanical tests - Determination of matting properties
TS EN ISO 3745 Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms
TS EN 60534-8-2 Industrial process control valves - Part 8: Noise characteristics - Part 2: Laboratory measurement of hydrodynamic flow noise in control valves
TS EN 60704-2-10 Electrical appliances for household and similar use - Test code for the determination of acoustic noise generated by air - Part 2-10: Special drawing for electric cooking stoves, ovens, grills, microwave ovens and any combination thereof
TS EN 60118-15 Electroacoustic - Hearing aids - Part 15: Methods for signal processing in hearing instruments with speech-like signals
TS EN 60704-2-6 Acoustic noise - Test code for the determination of airborne noise from household electrical appliances - Part 2-6: Particular requirements for drum dryers
TS EN 62585 Electroacoustic - Method for determining corrections to obtain the free field response of a sound level meter
TS EN ISO 3744 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods applied in a fundamentally free field on a reflective plane
TS EN 1793-2 Road traffic noise reduction systems - Test method for the determination of acoustic performance - Part 2: Basic properties of airborne sound insulation
TS EN 1793-6: 2012 Road traffic noise reduction devices - Test method for the determination of acoustic efficiency - Part 6: Key features - In situ values of sound insulation emitted by air directly under field conditions
TS EN 61094-8 Electroacoustic-Measurement microphones-Part 8: Methods for comparison of free-field calibration of standard working microphones
TS EN 60704-1: 2010 / A11 Acoustic noise - Test code for the determination of airborne noise from electrical appliances used in households and similar places - Part 1: General rules
TS EN 60704-2-4 Acoustic noise - Test code for the determination of airborne noise from household electrical appliances - Part 2-4: Particular requirements for washing machines and centrifugal spinners
TS EN ISO 11553-3 Safety on machines - Laser processing machines - Part 3: Noise reduction and noise measurement methods on laser equipment and hand held laser processing machines (setting degree 2)
TS EN 62127-2 / A1 Ultrasonic-Hydrophones-Section 2: Calibration of ultrasonic fields up to 40 MHz
TS EN 61161 Ultrasonic - Measurement of power-Radiation force balance and performance characteristics
TS EN 60645-3 Electroacoustic - Audiometric device - Part 3: Short term test marks
TS EN 60645-7 Electroacoustic - Hearing aids - Part 6: Instruments for the measurement of otoacoustic emissions
TS EN 61094-8 / AC Electroacoustic-Measuring microphones-Part 8: Methods for comparison of free-field calibration of standard working microphones
TS EN 1793-2 Road noise reduction systems - Acoustic performance
TS EN 12102 Air conditioners - Heat pumps and dehumidifiers air-driven noise-driven compressor driven by electrical energy - Determination of sound power level
TS EN 14584 Non-destructive testing - Acoustic emission - Inspection of pressurized metal equipment during verification tests - Planar placement of Ae welds
TS EN 60704-2-14 Domestic and similar electrical appliances - Test code for the determination of airborne acoustic noise - Part 2-14: Particular requirements for refrigerators, frozen food storage cabinets and freezers
TS EN ISO 2922: 2000 / A1 Acoustics - Measurement of airborne sound transmitted by ships in inland waterways and ports
TS EN ISO 3095 Railway applications - Acoustics - Measurement of noise emitted from on-board vehicles
TS EN 62127-3 / A1 Ultrasonic-Hydrophones-Part 3: Characteristics of medical ultrasonic hydrophones up to 40 MHz
TS ISO 362-2 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: Class L
TS EN 50332-1 Sound system device - Headphones and combined headphones with portable audio devices - Maximum sound pressure level measurement method and limit values - Part 1: General method for packaged devices
TS EN 50332-2 Sound system equipment: Head-and-ear headphones for portable audio equipment - Methodology and limitation of maximum sound pressure level measurement - Part 2: Head-mounted if each head-and-ear headphones are supplied separately or together. headset
TS EN 61672-1 Electroacoustic - Sound level meters - Part 1: Specifications
TS EN 61672-2 Electroacoustic - Sound level meters - Part 2: Pattern evaluation tests
TS EN 61672-3 Electroacoustic-Sound level meters - Part 3: Periodic tests
TS EN ISO 1680 Acoustic - Test code for measuring airborne noise from rotary electrical machines
TS EN ISO 3745 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms (ISO 3745: 2012)
TS EN ISO 15667 Acoustic guidance for noise control with enclosures and cabinets
ISO EN ISO 3743-1 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small welds moving in tinned environments - Part 1: Comparison method for test rooms with rigid walls (ISO 3743-1: 2010)
TS EN ISO 10052 / A1 Acoustics - Measurement of sound and impact sound insulation and equipment sound on site - Survey method - A1 (ISO 10052: 2004 / Amd 1: 2010)
TS EN ISO 3741 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - High precision methods for ringing test rooms (ISO 3741: 2010)
tst EN 61672-1 Electroacoustic - Sound level meters - Part 1: Specifications
TS EN 1793-6 Traffic noise reduction systems on roads - Test method for the determination of acoustic performance - Part 6: Main features - Values in the application area for the insulation of airborne sound under direct sound field conditions
TS EN ISO 9902-2: 2001 / A2: 2014Textile machines- Noise test code- Part 2: Ring spinning preparation machines and ring spinning machines
TS EN ISO 9902-3: 2001 / A2: 2014Textile machines- Noise test code- Part 3: Machines used on nonwovens
TS EN ISO 9902-4: 2001 / A2: 2014Textile machines- Noise test code- Part 4: Filling and sample preparation machines
TS EN ISO-9902-5: 2001 / A2: 2014Textile machines- Noise test code- Part 5: Weaving and knitting pretreatment machines
TS EN ISO 9902-6: 2001 / A2: 2014Textile machines- Noise test code section 6: Fabric weaving machines
TS EN ISO 9902-7: 2001 / A2: 2014Textile machines - Noise test code section 7: Paint and finishing machines
TS EN ISO-9902-1: 2001 / A2: 2014Textile machines - Noise test code - Section 1: General rules
TS EN 62555 Ultrasonic - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems
TS EN 61260-1 Electroacoustic - Octave-band and fractional octave band filters - Part 1: Specifications
TS EN ISO 11200 Acoustics - Noise from machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a workstation and at other specified locations
TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
TS ISO 6395 Acoustic-Measurement of external noise emitted by construction and excavation machines-Dynamic test conditions
TS ISO 6395 Acoustics - Construction and excavation machines - Determination of sound power level - Dynamic test conditions
TS ISO 6396 Construction and excavation machinery - Determination of emission sound pressure level in operator position - Dynamic test conditions
TS EN 16272-3-2 Railway applications - Railway line - Noise barriers and relevant instruments affecting noise propagation from air - Test method for the determination of acoustic performance - Part 3-2: Single number ratios for normalized railway noise spectrum and direct field applications
TS EN ISO 3747 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering / survey methods for site use in ringing environments (ISO 3747: 2010)
TS EN ISO 7779 Acoustics - Measurement of airborne noise from information technology and communication equipment (ISO 7779: 2010)
TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method (ISO 10052: 2004)
TS EN 62489-2 Electroacoustic - Sound-frequency induction loop systems to aid hearing - Part 2: Methods for calculating and measuring low-frequency magnetic field emissions from the loop to assess compliance with the guidelines for human exposure limits
TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
Acoustic - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for mobile small welds in ringing environments - Part 3743: Methods for special ringing test rooms (ISO 2-2: 3743) TS EN ISO 2-1994
TS EN ISO 11200 Acoustics - Noise emitted from machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a workstation and in other specific locations (ISO 11200: 2014)
TS EN ISO 3095 Acoustics - Railway applications - Measurement of noise from rail vehicles
TS EN ISO 5136 Acoustics - Determination of sound power emitted by fans and other means of moving air - in-channel method (ISO 5136: 2003)
Textile machinery - Noise test code - Part 9902: General rules TS EN ISO 1-2001: 2 / A1
TS EN ISO 9902-2: 2001 / A2 Textile machinery - Noise test code - Part 2: Ring spinning preparation machines and ring spinning machines
Textile machinery - Noise test code - Part 9902: Machines used on nonwovens. TS EN ISO 3-2001: 2 / A3
TS EN ISO 9902-4: 2001 / A2 Textile machinery - Noise test code - Part 4: Yarn processing, rope and rope manufacturing machines - Amendment 2
TS EN ISO 9902-5: 2001 / A2 Textile machinery - Noise test code - Part 5: Weaving and knitting pretreatment machines
TS EN ISO 9902-6: 2001 / A2 Textile machinery - Noise test code section 6: Fabric weaving machines
TS EN ISO 9902-7: 2001 / A2 Textile machinery - Noise test code section 7: Dyeing and finishing machines
ISO EN ISO 10846-1 Acoustics and vibration - Laboratory measurement of vibro-acoustic transmission properties of elastic elements - Part 1: Principles and guidelines (ISO 10846-1: 2008)
TS EN ISO 3381: 2011Rail applications - Measurement of noise in Akstik-Rail vehicles
TS EN 15461: 2008 + A1Railway applications - Noise emission - Determination of dynamic characteristics of railway lines for transition noise measurements
TS EN 15610 Railway applications - Noise emission - Railway rail roughness measurement related to rolling noise
TS EN 15892: 2011 Railway applications - Noise emission - Noise measurement in the driver's cab
TS EN 16272-3-2 Railway applications - Railway line - Noise barriers and relevant instruments affecting noise propagation from air - Test method for the determination of acoustic performance - Part 3-2: Single number ratios for normalized railway noise spectrum and direct field applications
TS EN ISO 1680 Acoustics - Test code for the measurement of airborne noise from electrical rotary machines
TS EN ISO 11205 Acoustics - Noise emitted from machinery and equipment - Engineering method for the determination of emission sound pressure levels at work stations and other specific locations using sound intensity
TS EN ISO 2922 / A1 Acoustics - Measurement of airborne sound transmitted by ships in inland waterways and ports
ISO EN ISO 11904-2 Acoustics - Determination of sound pollution from sound sources placed close to the ear - Part 2: Technique using a dummy (ISO 11904-2: 2004)
TS EN 60704-2-1 Acoustic noise - Test code for the determination of airborne noise from household electrical appliances - Part 2-1: Particular requirements for vacuum cleaners
60704-2-14: 2013 / A11 Electrical appliances for household and similar use - Test code for the determination of airborne acoustic noise - Part 2-14: Particular requirements for refrigerators, frozen food storage cabinets and freezers
TS ISO 6396 Acoustics - Measurement of noise emitted by construction and excavation machines in the operator position - Dynamic test conditions
TS ISO 6396 / Cor 1 Acoustics - Measurement of noise emitted by construction and excavation machinery at the operator position - Dynamic test conditions
TS EN 60645-1 Electroacoustic - Audiometric equipment - Part 1: Equipment for pure tone audiometry
TS EN 14366 Laboratory measurement of noise from wastewater plants
TS ISO 362-1 Measurement of noise emitted by accelerating road vehicles - Engineering method - Section 1: M and n categories,
TS ISO 362-1 / Cor.1 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and n categories, technical modification 1
TS ISO 5130 Acoustics - Measurement of noise produced by road vehicles operating in steady state
TS EN ISO 16032 Acoustics - Measurement of sound pressure levels in buildings caused by service equipment - Engineering method
TS ISO 6396 / Cor 1 Construction and excavation machinery - Determination of emission sound pressure level at operator position - Dynamic test conditions REVOLUTION 1
TS EN ISO 4871 Acoustics - Declaration and verification of noise emission values of machinery and equipment
TS EN ISO 3746 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Observation method using a surrounding measuring surface on a reflective plane
TS EN 1915-4 + A1 Air ground support equipment - General rules - Part 4: Noise measurement methods and mitigation
TS EN 12102 Air conditioners, liquid cooling packages, heat pumps and dehumidifiers driven by electric compressors for heating and cooling spaces - Measurement of airborne noise - Determination of sound power level
TS EN 14462 Surface treatment equipment - Noise test code for surface treatment equipment including auxiliary handling equipment - Accuracy grades 2 and 3 "
TS EN 60704-2-5 / A1 Test code for the determination of airborne noise from electrical appliances used in households and similar places section 2-5: Particular requirements for storage-type room heaters
TS EN 60118-4 Electroacoustic - Hearing aids - Part 4: Induction circuit systems for hearing purposes - System performance requirements
TS EN 60318-3 Electroacoustic - Human head and ear simulator - Part 3: Acoustic coupler for calibration of high sensitivity headphones used in the audiometer
TS EN 62489-1 / A1 Electroacoustic - Sound frequency induction circuit systems for assisted hearing - Part 1: Methods for determining and measuring the performance of system components
TS EN 60704-2-13 Domestic and similar electrical appliances - Test code for the determination of acoustic noise emitted by air - Part 2-13: Particular requirements for hoods
TS EN ISO 2151 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Degree 2)
TS EN ISO 23771 Textile Machinery - Guidance for reducing the noise level of textile machinery
TS EN 16272-3-2 Railway applications - Railway line - Noise barriers and relevant instruments affecting noise propagation from air - Test method for determination of acoustic performance - Part 3-2: Single number ratios for normalized railway noise spectrum and direct field applications 13.11.2014
TS EN ISO 3747 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering / survey methods for site use in ringing environments (ISO 3747: 2010)
TS EN ISO 7779 Acoustics - Measurement of airborne noise from information technology and communication equipment (ISO 7779: 2010)
TS EN ISO 10052 Acoustics - Measurement of airborne sound and impact sound insulation and equipment sound in the field - Survey method (ISO 10052: 2004)
TS EN 62489-2 Electroacoustic - Sound-frequency induction loop systems to aid hearing - Part 2: Methods for calculating and measuring low-frequency magnetic field emissions from the loop to assess compliance with the guidelines for human exposure limits
TS EN ISO 12999-1 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
Acoustic - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for mobile small welds in ringing environments - Part 3743: Methods for special ringing test rooms (ISO 2-2: 3743) TS EN ISO 2-1994
TS EN ISO 11200 Acoustics - Noise emitted from machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a workstation and in other specific locations (ISO 11200: 2014)
TS EN ISO 3095 Acoustics - Railway applications - Measurement of noise from rail vehicles
TS EN ISO 5136 Acoustics - Determination of sound power emitted by fans and other means of moving air - in-channel method (ISO 5136: 2003)
Textile machinery - Noise test code - Part 9902: General rules TS EN ISO 1-2001: 2 / A1
TS EN ISO 9902-2: 2001 / A2 Textile machinery - Noise test code - Part 2: Ring spinning preparation machines and ring spinning machines
Textile machinery - Noise test code - Part 9902: Machines used on nonwovens. TS EN ISO 3-2001: 2 / A3
TS EN ISO 9902-4: 2001 / A2 Textile machinery - Noise test code - Part 4: Yarn processing, rope and rope manufacturing machines - Amendment 2
TS EN ISO 9902-5: 2001 / A2 Textile machinery - Noise test code - Part 5: Weaving and knitting pretreatment machines
TS EN ISO 9902-6: 2001 / A2 Textile machinery - Noise test code section 6: Fabric weaving machines
TS EN ISO 9902-7: 2001 / A2 Textile machinery - Noise test code section 7: Dyeing and finishing machines
ISO EN ISO 10846-1 Acoustics and vibration - Laboratory measurement of vibro-acoustic transmission properties of elastic elements - Part 1: Principles and guidelines (ISO 10846-1: 2008)
TS EN ISO 3381: 2011Rail applications - Measurement of noise in Akstik-Rail vehicles
TS EN 15461: 2008 + A1Railway applications - Noise emission - Determination of dynamic characteristics of railway lines for transition noise measurements
TS EN 15610 Railway applications - Noise emission - Railway rail roughness measurement related to rolling noise
TS EN 15892: 2011 Railway applications - Noise emission - Noise measurement in the driver's cab
TS EN 16272-3-2 Railway applications - Railway line - Noise barriers and relevant instruments affecting noise propagation from air - Test method for the determination of acoustic performance - Part 3-2: Single number ratios for normalized railway noise spectrum and direct field applications
TS EN ISO 1680 Acoustics - Test code for the measurement of airborne noise from electrical rotary machines
TS EN ISO 11205 Acoustics - Noise emitted from machinery and equipment - Engineering method for the determination of emission sound pressure levels at work stations and other specific locations using sound intensity
TS EN ISO 2922 / A1 Acoustics - Measurement of airborne sound transmitted by ships in inland waterways and ports
ISO EN ISO 11904-2 Acoustics - Determination of sound pollution from sound sources placed close to the ear - Part 2: Technique using a dummy (ISO 11904-2: 2004)
TS EN 60704-2-1 Acoustic noise - Test code for the determination of airborne noise from household electrical appliances - Part 2-1: Particular requirements for vacuum cleaners
60704-2-14: 2013 / A11 Electrical appliances for household and similar use - Test code for the determination of airborne acoustic noise - Part 2-14: Particular requirements for refrigerators, frozen food storage cabinets and freezers
TS ISO 6396 Acoustics - Measurement of noise emitted by construction and excavation machines in the operator position - Dynamic test conditions
TS ISO 6396 / Cor 1 Acoustics - Measurement of noise emitted by construction and excavation machinery at the operator position - Dynamic test conditions
TS EN 60645-1 Electroacoustic - Audiometric equipment - Part 1: Equipment for pure tone audiometry
TS EN 14366 Laboratory measurement of noise from wastewater plants
TS ISO 362-1 Measurement of noise emitted by accelerating road vehicles - Engineering method - Section 1: M and n categories,
TS ISO 362-1 / Cor.1 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and n categories, technical modification 1
TS ISO 5130 Acoustics - Measurement of noise produced by road vehicles operating in steady state
TS EN ISO 16032 Acoustics - Measurement of sound pressure levels in buildings caused by service equipment - Engineering method
TS ISO 6396 / Cor 1 Construction and excavation machinery - Determination of emission sound pressure level at operator position - Dynamic test conditions REVOLUTION 1
TS EN ISO 4871 Acoustics - Declaration and verification of noise emission values of machinery and equipment
TS EN ISO 3746 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Observation method using a surrounding measuring surface on a reflective plane
TS EN 1915-4 + A1 Air ground support equipment - General rules - Part 4: Noise measurement methods and mitigation
TS EN 12102 Air conditioners, liquid cooling packages, heat pumps and dehumidifiers driven by electric compressors for heating and cooling spaces - Measurement of airborne noise - Determination of sound power level
TS EN 14462 Surface treatment equipment - Noise test code for surface treatment equipment including auxiliary handling equipment - Accuracy grades 2 and 3 "
TS EN 60704-2-5 / A1 Test code for the determination of airborne noise from electrical appliances used in households and similar places section 2-5: Particular requirements for storage-type room heaters
TS EN 60118-4 Electroacoustic - Hearing aids - Part 4: Induction circuit systems for hearing purposes - System performance requirements
TS EN 60318-3 Electroacoustic - Human head and ear simulator - Part 3: Acoustic coupler for calibration of high sensitivity headphones used in the audiometer
TS EN 62489-1 / A1 Electroacoustic - Sound frequency induction circuit systems for assisted hearing - Part 1: Methods for determining and measuring the performance of system components
TS EN 60704-2-13 Domestic and similar electrical appliances - Test code for the determination of acoustic noise emitted by air - Part 2-13: Particular requirements for hoods
TS EN ISO 2151 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Degree 2)
TS EN ISO 23771 Textile Machinery - Guidance for reducing the noise level of textile machinery
TS EN 1915-4 + A1 Air ground support equipment - General rules - Part 4: Noise measurement methods and mitigation
TS 2607 ISO 1999 Acoustics - Determination of exposure to workplace noise and estimation of hearing loss caused by this noise
TS 2609 EN ISO 2922 Acoustics - Measurement of airborne sound transmitted by ships in inland waterways and ports
Acoustic - Determination of sound power levels of noise sources using sound pressure - Precision methods for ringing chambers
TS EN ISO 3381: 2011 Railway applications - Measurement of noise within the Akstik - Rail vehicles
TS EN ISO 3740 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards
TS EN ISO 3743-2 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small moving welds in resonant areas - Part 2: Methods for special resonance test rooms
Acoustic - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms
TS EN ISO 3822-2 Laboratory tests of noise emissions from devices and equipment used in acoustical water supply facilities - Part 2: Mounting and operating conditions for shut-off devices (taps) and mixing valves
TS EN ISO 4871 Acoustics - Declaration and verification of noise emission values of machinery and equipment
TS ISO 4872 Acoustics - Measurement of airborne noise emitted from construction machinery and equipment intended for outdoor use - Determination of compliance with noise limits
TS ISO 5131 Acoustics -Tractors and machines used in agriculture and forestry -Measuring the noise in the operator position-Observation method
TS EN ISO 5135 Acoustics - Measurement of noise power levels in ventilation rooms, units, dampers and valves
TS EN ISO 5136 Acoustics - Determination of the sound power emitted by the fans and other means of moving the air - Channel method
TS ISO 362-2 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category
TS EN ISO 6926 Acoustics - Rules for the performance and calibration of reference sound sources used to determine sound power levels
TS ISO 7760 Photobath wastes-Determination of hydroquinone content-Spectrophotometric method
TS ISO 7960 Airborne noise emitted by machine tools - Operating conditions for woodworking machines
TS 8066 HD 450.3 S1 Hearing aids - Part 3: Hearing aids that are not completely worn by the user
TS 8069 HD 450.9 S1 Hearing aids - Part 9: Methods for measuring the characteristics of hearing aids with bone vibrators
TS ISO 8297 Acoustics - Determination of sound power levels for the assessment of ambient sound pressure levels in industrial plants with multiple noise sources - Engineering method
TS IEC 60050-801 Terms and definitions used in electrotechnics - Part 801: Acoustic and electroacoustic
TS IEC 60050-801 Terms and definitions used in electrotechnics - Part 801: Acoustic and electroacoustic
TSE EEC / 86 / 188: 2001 may 12 may 1986 date and 86 / 188 / at
TS EN ISO 3746 / AC Acoustic - Determination of sound power levels of noise sources using sound pressure - Survey method using a surrounding measuring surface along a projection plane
tst ISO 9612 Principles for measuring and evaluating exposure to noise in an acoustic operating environment
TS ISO 9613-1 Acoustics - Reduction of sound when spreading outdoors - Part 1: Calculation of sound absorption by atmosphere
TS ISO 9613-2 Acoustics - Reduction of sound when spreading outside - Part 2: General calculation method
TS EN ISO 9614-1 Determination of sound power levels of noise sources using acoustic-sound intensity - Part 1: Measurement at different points
TS ISO 1996-2 / T1 Acoustics - Description, measurement and evaluation of environmental noise - Part 2: Determination of environmental noise levels
TS EN ISO 9902-1 Textile machinery - Noise test code - Section 1: General rules
TS EN ISO 9902-2 Textile machinery - Noise test code - Part 2: Spinning preparation and spinning machines
TS EN ISO 9902-3 Textile machinery - Noise test code - part 3: Nonwovens
TS EN ISO 9902-4 Textile machinery - Noise test code - Section 4: Yarn processing, rope and rope manufacturing machines
TS EN ISO 9902-5 Textile machinery - Noise test code - part 5: Weaving and knitting preparation machines
TS EN ISO 9902-6 Textile machinery - Noise test code - part 6: Fabric production machinery
TS EN ISO 9902-7 Textile machinery - Noise test code - Section 7: Dyeing and finishing machinery
TS EN ISO 9902-1: 2001 / A1 Textile machinery - Noise test code - Section 1: General rules
TS EN ISO 10534-2 Determination of sound absorption coefficient and impedance in acoustic-impedance pipes-Part 2: Transfer function method
TS EN ISO 10846-5 Acoustic and vibration - Measurement of the vibroacoustic transmission properties of flexible elements in the laboratory - Part 5:
TS EN ISO 11201 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a workstation and at other specified locations - Engineering method mainly used along a reflection plane in a free field
TS EN ISO 11202 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a workstation and at other specified locations
TS EN ISO 11203 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure level from sound power level at a workstation and at other specified locations
TS EN ISO 11205 Acoustics - Noise from machinery and equipment - Engineering method for the determination of emission sound pressure levels at the workstation and at other specified locations using sound intensity "
TS EN ISO 11546-1 Acoustics - Determination of sound insulation performance of enclosures - part 1: Measurements in laboratory conditions (for reporting purposes)
TS EN ISO 11546-1 Acoustics - Determination of sound insulation performance of enclosures - part 1: Measurements in laboratory conditions (for reporting purposes)
TS EN ISO 11689 / AC Acoustics - Comparison of noise emission data for machinery and equipment
TS EN ISO 11690-1 Acoustics - Recommended practice for the design of low-noise workplaces with machinery - Part 1: Noise control strategies
TS EN ISO 11690-2 Acoustics - Recommended application for the design of workplaces with low noise levels in the machine part 2: Noise control measures
TS EN ISO 11690-3 Acoustics - Recommended practice for the design of workplaces with low noise levels in the machine - Part 3: Sound emission and noise estimation in work rooms
TS EN ISO 11820 Acoustics - Silencers - On-site measurements
TS EN ISO 11821 Acoustics - Measurement of sound attenuation of a removable display
TS EN ISO 11957 Acoustics - Determination of sound insulation performance of cabinets - Laboratory and on-site measurements
TS EN 12053 + A1 Safety of industrial cargo vehicles - Test methods for measuring noise emissions
TS EN 12545 + A1 Machinery for the manufacture of footwear, leather and artificial leather goods - Noise test code - General rules
TS EN 12549 + A1 Acoustics - Noise test for upholsterer guns - engineering method
tst EN 12639 Liquid pumps and pumping units - Noise test code - accuracy class 2 and accuracy class 3
TS EN 12639 / tst AC: 2004 Liquid pumps and pumping units - Noise test code - Accuracy quality 2 and accuracy quality 3
TS EN 12639 / tst AC: 2000 Liquid pumps and pumping units - Noise test code - Accuracy quality 2 and accuracy quality 3
TS EN 13023 + A1 Noise measurement methods for printing, paper converting, papermaking machinery and ancillary equipment - Accuracy class 2 and 3
TS EN ISO 13473-5 Description of coating texture - Using surface profiles - Part 5: Megadoku determination
TS EN 13487 Heat exchangers - Forced convection air-cooled refrigerant condensers and dry coolers - Sound measurement "
TS EN ISO 14163 Acoustics - Guidance for noise control with silencers
TS EN 14163 / AC Oil and gas industries - Pipeline transport systems - Welding of pipelines
TS EN 14366 Laboratory measurement of noise from wastewater plants "
TS EN ISO 14509-1 Small boat - Measurement of airborne sound from motorized cruising boats
TS EN ISO 14509-2 Small hull - Measurement of the sound emitted by air from motor sailing boats - Part 2: Assessment of sound using the reference hull
Small boat - Airborne sound from motorized pleasure boats - Part 14509: Sound evaluation using calculation and measurement procedures
TS EN 15036-2 Test rules for airborne noise emissions from heating boilers - Heat generators section 2: Flue gas noise emissions at the output of heat generators
TS ISO 15086-1 Hydraulic fluid power - Determination of fluid-induced noise characteristics of components and systems - Part 1: Introduction
TS ISO 15086-2 Hydraulic fluid power - Determination of fluid-induced noise characteristics of components and systems - Part 2: Measurement of fluid sound velocity in pipe
TS EN 15461: 2008 + A1: 2010 Railway applications - Noise emission - Characterizing the dynamic properties of line sections for passage by noise measurement
TS EN 15610 Railway applications - Noise emission - Railway rail roughness measurement related to rolling noise
TS EN ISO 15667 Acoustics - Guide for noise control with enclosures and cabinets
TS EN ISO 15744 Power tools - Noise measurement code - Engineering method (degree 2)
TS EN 15892: 2011 Railway applications-Noise emission-Measurement of noise in the driver's cab
TS ISO 16902-1 Hydraulic fluid power - Test code for the determination of sound power levels using sound techniques - Engineering method - Part 1: Pumps
TS EN ISO 17201-3 Acoustics - Noise in shooting areas - Part 3: Guide for sound propagation calculations
TS EN ISO 17201-5 Acoustics - Noise in shooting areas - Part 5: Noise management
TS EN ISO 17201-4 Acoustics - Noise in firing range - Part 4: Estimation of bullet noise
TS EN ISO 25178-6 Geometrical product properties (gps) - Surface structure: Air - Part 6: Classification of methods for measuring surface structure
TS EN 60118-12 Hearing aids - Part 12: Dimensions of electrical connector systems
TS EN 60118-14 Hearing aids - Part 14: Characteristics of the digital interconnection surface
TS EN 60318-6 Electroacoustic - Human head and ear simulators - Part 6: Mechanical coupler for measurements on bone vibrators
TS EN 60318-1 Electroacoustic - Human head and ear simulators - Part 1: Ear simulator for calibration of on-ear headphones
TS EN 60318-4 Electroacoustic - Human head and ear simulators - Part 4: Plug-in ear simulator for measurements related to earpiece elements connected by ear pieces
TS EN 60318-5 Electroacoustic - Human head and ear simulators - section 5: 2 cm3 coupler for measuring hearing aids and headphones connected to the ear by means of ear plugs
60534-8-3: 2011 Industrial process control valves-Part 8: Noise characteristics-Section 3: Control valve aerodynamic noise estimation method
TS EN 60534-8-1 Industrial process control valves - Part 8: Determination of noise - Part 1: Hydrodynamics in control valves - Measurement of noise due to aerodynamic flow in the laboratory
TS EN 60565 Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 hz to 1 mhz
TS EN 60601-2-37 Electrical medical devices - Part 2-37: Specific requirements for the safety of ultrasonic medical diagnostic and imaging equipment
TS EN 60645-5 Electroacoustic - Sound measuring equipment - Part 5: Instruments used for measuring auditory acoustic impedance / admittance
TS EN 60704-1 Acoustic noise - Test code for the determination of airborne noise from household electrical appliances - Part 1: General requirements
TS EN 60704-2-3 / A1Acoustic noise - Test code for the determination of airborne noise from household electrical appliances - Part 2-3: Particular requirements for dishwashers
TS EN 60704-2-5 Test code for the determination of airborne noise from electrical appliances used in households and similar places section 2-5: Particular requirements for storage-type room heaters
TS EN 60704-2-7 Acoustic noise - Published by appliances used in homes and similar places - Test code for the determination of non-propagating in the air - Part 2-7: Particular requirements for ventilators
TS EN 60704-2-8 Acoustic noise issued by devices used in households and similar places -Examination code for the determination of air diffusion-Part 2-8: Particular requirements for electric razors
TS EN 60704-2-3 Acoustic noise - Test code for the determination of airborne noise from household electrical appliances - Part 2-3: Particular requirements for dishwashers
TS EN 60704-2-9 Household and similar electrical appliances - Test code for the determination of airborne acoustic noise - Part 2-9: Particular requirements for electric hair care devices
TS EN 60704-3 Acoustic noise - issued by household electrical appliances - Test rules for the determination of airborne noise section 3: Procedures for the determination and verification of declared noise emission values
TS EN 60704-2-2: 2010 Test code for the determination of airborne noise from electrical appliances used in households and similar places section 2-2: Particular requirements for air flow heaters
TS EN 60749-16 Semiconductor components - Mechanical and climatic test methods - Part 16: Determination of particle impact noise (PCGT)
TS EN 60749-30: 2005 / A1: 2011 Semiconductor components - Mechanical and climatic test methods - Part 30: Preconditioning of non-sealed surface-mounted components before reliability testing
TSE IEC / TR 60782 Measurement of ultrasonic magnetostrictive (magnetically shrinkable) transducers
TS IEC 60866 Features and calibration of hydrophones operating in the 0,5 mhz to 15 mhz frequency range
TS EN 61012 Filters for the measurement of audible sound in the presence of high frequency sound
TS EN 61094-4 Measuring microphones - Part 4: Characteristics of microphones used as working standards
TS EN 61094-6 Measuring microphones - Part 6: Electrostatic actuators for the determination of frequency response "
TS EN 61094-1 Measuring microphones - part 1: Specification for laboratory standard microphones
TS EN 61094-2: 2009 Electroacoustic-Measurement microphones-Part 2: Primary method for the recalibration of laboratory standard microphones by pressure technique
tst EN 61161 Ultrasonic power measurements - Radiation balances and performance rules
TS EN 61183 Electroacoustic-Sound Level Meters Random Arrival and Spread-Field Calibration
TS EN 61252 Sound equipment - Technical specifications for personal sound exposure meters
TS EN 61252 / A1 Sound equipment - Technical specifications for personal sound meters
TS EN 61260 Electroacoustic-Octave band and fractional octave band filters
TS EN 61265 Electroacoustic - Aircraft noise measuring instruments - Performance characteristics of systems for measuring one-third octave band sound pressure levels in noise certification of transport grade aircraft
TS EN 61329 sound system - Methods for determining and measuring the performance of sounders (electroacoustic transducers for sound production)
TS EN 61391-1 Ultrasonic - Pulse echo scanners - Part 1: Techniques for the calibration of spatial measuring systems and measurements of the point-distributed function response system
TS EN 61391-2 Ultrasonic - Pulse echo scanners - Part 2: Measurement of the maximum depth of penetration and local dynamic range