The standards required for Powder Metallurgy are given below. We test, inspect, audit and certify all of the standards given below.
TS EN 27627-3 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 3: Determination of the content of sobalt, iron, manganese and nickel in the range of% 0,01-% 0,5 (m / m)
TS EN 27627-2 Hard metals-Chemical analysis by flame atomic absorption spectrometer-Part 2: Determination of calcium, potassium, magnesium and sodium content in the range of% 0,001-% 0,02 (m / m)
TS EN 27627-1 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 1: General rules
TS EN 27627-4 Hard metals-Chemical analysis by flame atomic absorption spectrometer-Part 4: Determination of the content of molybdenum, titanium and vanadium in the range of% 0,01 to% 0,5 (m / m)
TS EN 27627-6 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 6: Determination of chromium content in the range of% 0,01 to% 0,2 (m / m)
TS EN 27627-5 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium content in the range of% 0,5 to% 2 (m / m)
TS EN 23312 Sintered metal and hard metals detection of young module
TS EN 24003 Metal materials - Permeable sintered - Determination of pore size by bubble test
TS 6936 EN 24506 Hard metals - Compression test
TS 4481 EN 23923-2 Metallic powders- Determination of apparent density- Part 1: Funnel method
TS 4277 EN 25754 Sintered metal materials - Except hardmetals - Notched impact test piece
TS 6441 EN 23312 Sintered metal materials and hard metals - Determination of Young's modulus
Metallic powders - Determination of oxygen content by reduction method Part 4491: Hydrogen reducible oxygen TS ISO 3-1 / T4491 (Number modification: TS EN ISO 3-3)
TS EN ISO 3954 Powders for metallurgical purposes Sampling
TS EN ISO 3927 Metallic powders - Excluding hardmetal powders - Determination of compressibility under uniaxial pressure
TS EN ISO 4499-1 Hard metals - Metallographic determination of microstructure - Part 1: Photomicrograph and description
TS EN ISO 3369 Impermeable sintered metal materials and hard metals - Determination of density
TS EN ISO 11876 Hard metals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powder - Flame atomic absorption spectrometric method
TS EN ISO 3953 Metal powders - Determination of sedimentation density
TS EN ISO 2739: 2012 Sintered metal bushings - Determination of radial crush strength
TS EN ISO 7625 Sintered metal materials other than hard metals - Sample preparation for chemical analysis - Preparation of samples for chemical analysis of carbon content determination
TS EN ISO 5755: 2012 Sintered metal material-Specifications
TS EN ISO 4492: 2013 Metallic powders - Excluding powders for hard metals - Determination of dimensional changes for compaction and sintering
TS EN ISO 4491-4 Metal powders-Determination of oxygen by reduction method-Part 4: Determination of total oxygen by reduction-extraction
TS EN ISO 13517 Metallic powders - Determination of flow rate with calibrated funnel (Gustavsson flovmeter)
TS EN ISO 3326: 2013 Hardmetals - Determination of magnetization (coercivity)
TS EN ISO 22068 Sintered metal injection molded materials - Specifications
TS EN ISO 4490 Metallic powders - Hall flowmeter measurement methods with calibrated funnel
TS EN ISO 4499-3 Hard metals - Metallographic determination of microstructure - Part 3: Measurement of microstructure properties in Ti (C, N) and WC / cubic carbide based ser metals
TS EN ISO 4499-4 Hard metals - Metallographic determination of microstructure - part 4: Properties of porosity, carbon defects and eta phase content
TS EN ISO 3928 Sintered metal materials, except hard metals - fatigue test pieces
TS EN 1274 Thermal spraying - Powders - Composition and technical supply conditions
TS 2305 EN ISO 2738 Sintered metal materials other than hard metals - Sintered permeable materials - Determination of density, oil content and open porosity
TS EN ISO 2740 Sintered metal materials - Excluding hard metals - Tensile test pieces
TS EN ISO 3327 Hard materials - Determination of transverse tensile strength
TS ISO 3738-1 / T1 (Number modification, TS EN ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method
TS EN ISO 3738-1 (Formerly: TS ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method
TS ISO 3738-2 / T1 (Number modification: TS EN ISO 3738-2) Hard metals - Rockwell hardness test (scale a) part 2: Preparation and calibration of standard test blocks
TS EN ISO 3907 Hard metals: Determination of total carbon content-Gravimetric method
TS EN ISO 3908 Hard metals - Determination of insoluble (free) carbon; Gravimetric method
TS EN ISO 3923-1 Metal powders- Determination of apparent density- Part 1: Funnel method
TS EN ISO 4022 (Formerly: TS ISO 4022) Sintered permeable metal materials - Determination of fluid permeability
TS ISO 4022 / T1 (Number modification: TS EN ISO 4022) Sintered permeable metal materials - Determination of fluid permeability
TS 4222 EN ISO 3325 Sintered metal materials - excluding hard metals - Determination of cross fracture strength
TS 4230 EN 24003 Sintered permeable metal materials - Bubble test - Determination of pore size
TS 4231 EN 23995 Metallic powders - Determination of wet strength by cross-breaking of rectangular briquettes
TS 4482 Determination of apparent density of metallic powders by shaking funnel method
Metallic powders - Determination of oxygen content by reduction method 4491: Hydrogen-reducible oxygen TS EN ISO 3
TS EN ISO 4499-2 Hard metals - Metallographic determination of microstructure - Part 2: Wc particle size measurement
TS EN ISO 4507 Sintered iron based materials, embossed or carbo nitrided - Determination and verification of surface hardness depth by micro hardness test
TS 6194 EN 23909 Hard metals - Determination of cobalt - Potentiometric method
TS 7152 EN 24883 Determination of metallic elements by hard metals-X-ray fluorescence solution method
TS 8840 Metallic iron powder
tst 8840 Metallic iron powder
TS 9752 EN 24496 Metal powders-Determination of acid-insoluble matter in iron, copper, tin and bronze powders
TS ISO 10070 Metallic powders - Determination of the closed-specific surface area by measuring the air permeability of the powder bed under stable flow conditions
TS ISO 10076 Metallic powders - Determination of particle size distribution by gravity sedimentation and damping in a liquid
TS EN ISO 10270 Corrosion of metals and alloys - Water corrosion test of zirconium alloys used in nuclear power reactors
TS 10283 EN ISO 4491-2 Metallic powders-Determination of oxygen content by reduction methods-Part 2: Mass loss by hydrogen reduction (hydrogen loss)
TS 10975 EN 24501 Hard metals - Determination of titanium - Photometric peroxide method
TS EN 24497 Metal powders - Determination of part size by dry sieving
TS EN 24503 Hardmetals-Determination of metal content-X-Ray fluorescence-Melting method
TS EN 24884 Hard metals - Sampling and testing of sintered test pieces from powders
TS EN 24489 Sintered hard metals - Sampling and testing
TS EN 24491-1 Metallic powders-Determination of oxygen content by reduction method-Part 1: General rules