All of the standards for Mechanical Inspection of Metals are given below. For years, our company continues to work without compromising the quality of the following items related to all the test, audit, inspection and certification services to you.
TS 1695 EN ISO 2624 Copper and copper alloys-Determination of average grain size
TS EN 10275 Metallic materials-Pipe ring hydraulic pressure test
TS EN ISO 2566-2 Steel - Conversion of elongation values - Part 2: Austenitic steels
TS EN ISO 7799 Metallic materials - 3 mm thickness or thinner - Reverse bending test
TS 4277 EN 25754 Sintered metal materials - Except hardmetals - Notched impact test piece
TS 6441 EN 23312 Sintered metal materials and hard metals - Determination of Young's modulus
TS EN ISO 14577-3 Metallic materials - Instrument trace test for hardness and material parameters - Part 3: Calibration of reference blocks
TS EN ISO 8491 Metallic materials - Pipe (full cross section) - Bending test
TS EN ISO 8493 Metallic materials - Pipe - Mouth expansion test (iso 8493: 1998) / note: To replace En 10234 (1993-10).
TS EN ISO 6507-4 Metallic materials - Vickers hardness test - Part 4: Charts and hardness values
TS EN 10325 Steel - Determination of yield strength increase by heat treatment effect
TS EN 61788-6 Superconductivity - Part 6: Measurement of mechanical properties - Tensile test of Cu / Nb-Ti compound superconductors at room temperature
TS EN ISO 6507-4 Metallic materials - Vickers hardness test - Part 4: Hardness value charts
TS EN ISO 3369 Impermeable sintered metal materials and hard metals - Determination of density
TS EN ISO 6892-2 Metal materials - Tensile test - part 2: High temperature test method
TS EN ISO 376 Metallic materials - Calibration of force measuring devices for the verification of single-axis test machines
TS EN ISO 26203-2 Metallic materials - Tensile test at high tensile speeds - Part 2: Servehydraulics and other test systems
TS EN ISO 2739: 2012 Sintered metal bushings - Determination of radial crush strength
TS EN ISO 9513 Metal materials - Calibration of extensometers used in uniaxial tests
TS EN ISO 377: 2013 Steel and steel products - Collection and preparation of samples and test pieces for mechanical tests
TS EN ISO 20482 Metallic materials - Sheet and strip - Erichsen buckling test
TS EN ISO 18265 Metal materials - Cycle of hardness values
TS EN ISO 8492 Metal materials - Pipe - Flattening test
TS EN ISO 8494 Metal materials - Pipe - Flange test
TS EN ISO 8495 Metal materials - Tubing - Ring expansion test
TS EN ISO 8496 Metal materials - Tubing - Ring tensile test
TS EN 61788-19 Superconductivity - Part 19: Measurement of mechanical properties - Room temperature tensile test of Nb3Sn composite superconductors reacting
TS EN ISO 9513 / AC Metal materials - Calibration of extensometers used in uniaxial tests - Teknik Korigendum 1
TS EN ISO 10113 Metallic materials - Determination of plastic strain rate of bands, sheets and strips
TS EN ISO 10275 Metallic materials - Sheet and strip - Determination of tensile stress hardening coefficient
TS EN ISO 16808 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by blowing test with optical measuring systems
TS EN ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method
TS EN ISO 6506-2 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of test equipment
TS EN ISO 6506-3 Metallic materials - Brinell hardness test - part 3: Calibration of reference blocks
TS EN ISO 6506-4 Metallic materials - Brinell hardness test - part 4: Hardness value charts
tst EN 61788-19 Superconductivity - Part 19: Measurement of mechanical properties - Room temperature tensile test of Nb3Sn composite superconductors
TS EN ISO 8492 Metal materials - Pipe - Flattening test
TS EN ISO 8494 Metal materials - Pipe - Flange test
TS EN ISO 8495 Metal materials - Tubing - Ring expansion test
TS EN ISO 18265 Metal materials - Cycle of hardness values
tst EN ISO 8492 Metal materials - Pipe - Flattening test
TS EN 10113-1 Hot rolled products - Fine grain weldable structural steels - Part 1: General technical delivery conditions
TS EN ISO 6508-2 Metallic materials - Rockwell hardness test - part 2: Verification and calibration of test equipment and tips
TS EN ISO 6508-3 Metallic materials- Rockwell hardness test- Part 3: Calibration of reference blocks
TS ISO 1143 Metals- Rotating bar bending fatigue tests
TS EN 61788-21 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General specifications and guidance
Metallic materials - Tensile test - Part 6892: Low temperature test method TS EN ISO 3-2015: 3
TS EN ISO 14577-1 Metallic materials - Instrument trace test for hardness and material parameters - Part 1: Test method
TS EN ISO 14577-2 Metallic materials - Instrument trace test for hardness and material parameters - Part 2: Verification and calibration of test machines
TS EN ISO 14577-3 Metallic materials - Instrument trace test for hardness and material parameters - Part 3: Calibration of reference blocks
TS EN ISO 7438 Metallic materials - Bending test
TS EN ISO 14556 Steel - Charpy impact test of V notched specimen - Instrument test method
TS EN ISO 16859-1 Metallic materials - Leeb hardness test - Part 1: Test method
TS EN ISO 16859-2 Metallic materials - Leeb hardness test - Part 2: Calibration and verification of test equipment
TS EN ISO 16859-3 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks
TS EN ISO 7500-1 Metal materials - Verification of single-axis static test machines - Part 1: Tensile / compression test machines - Verification and calibration of force measuring system
TS EN ISO 20482 Metallic materials - Sheet and strip - Erichsen buckling test
TS EN ISO 6508-1 Metallic materials- Rockwell hardness test- Part 1: Test method
TS ISO 12135 Metallic materials-Combined test method for determination of quartzist fracture toughness
TS EN ISO 6892-1 Metallic materials - Tensile test - Part 1: Test method at ambient temperature
TS EN ISO 148-1 Metallic materials- Charpy tapping test- Part 1: Test method
TS EN ISO 148-2 Metallic materials-Charpy tapping test-Part 2: Verification of test machine (pendulum tapping)
TS EN ISO 148-3 Metallic materials-Charpy tapping test-Part 3: Preparation and characterization of v-notch test pieces for indirect evaluation of tapping
TS EN ISO 14577-4 Metallic materials - Instrument trace test for hardness and material parameters - Part 4: Test method for metallic and non-metallic coatings
TS EN ISO 3928 Sintered metal materials, except hard metals - fatigue test pieces
TS EN ISO 6892-1 Metallic materials - Tensile test - Part 1: Test method at ambient temperature
TS ISO 12107 Metallic materials - Fatigue testing - Statistical planning and analysis of data
TS EN ISO 204 Metallic materials-Stress uniaxial creep test-Test method
TS 205-2 ISO 7801 Metallic materials - Wire - Bending test
TS EN ISO 6507-3 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks
TS EN ISO 6507-1 Metallic materials - Vickers hardness test - Part 1: Test method
TS EN ISO 6507-2 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of test equipment
TS 2023-1 EN ISO 2566-1 Steels - Conversion of elongation values - part 1: Carbon and less alloy steels
Steels - Conversion of elongation values - Part 2023: Austenitic steels TS 2-2566
TS EN ISO 2740 Sintered metal materials - Excluding hard metals - Tensile test pieces
TS EN ISO 3327 Hard materials - Determination of transverse tensile strength
TS ISO 3738-1 / T1 (Number modification, TS EN ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method
TS EN ISO 3738-1 (Formerly: TS ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method
TS EN ISO 3738-2 (Formerly: TS ISO 3738-2) Hard metals - Rockwell hardness test (scale a) part 2: Preparation and calibration of standard test blocks
TS ISO 3738-2 / T1 (Number modification: TS EN ISO 3738-2) Hard metals - Rockwell hardness test (scale a) part 2: Preparation and calibration of standard test blocks
TS 4222 EN ISO 3325 Sintered metal materials - excluding hard metals - Determination of cross fracture strength
TS EN ISO 4507 Sintered iron based materials, embossed or carbo nitrided - Determination and verification of surface hardness depth by micro hardness test
TS EN ISO 4545-1 Metallic materials - Knoop hardness test - Part 1: Test method
TS EN ISO 4545-2 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of test equipment
TS EN ISO 4545-3 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks
TS EN ISO 4545-4 Metallic materials - Knoop hardness test - Part 4: Hardness values chart
TS EN ISO 6892-2: 2011 Metal materials-Tensile test section 2: High temperature test method
TS EN ISO 7500-2 Metallic materials - Verification of uniaxial static testing machines - Part 2: Tensile creep testing machines - Verification of applied load
TSE ISO / TR 7705 charpy v in steel specifications - Guide for determining rupture energy in notched test pieces
TS 205-3 EN ISO 7799 Metallic materials - Sheet and strip of thickness 3 mm or less - Reverse bending test
TS 205-4 EN ISO 8491 Metallic materials - Pipe (full section) - Bending test
TS EN ISO 8493 Metal materials - Pipe - Mouth expansion test
TS EN 10229 Evaluation of hydrogen resistance to steel cracking
TS EN 10229 / T1 Evaluation of hydrogen cracking (no) resistance in steel products
TS EN 10274 Metallic materials - Tear test with weight reduction
TS EN 10275 Metallic materials - Pipe ring hydraulic pressure test
TS EN 10319-1 Metallic materials-Tensile stress relaxation tests-Part 1: Method for test machines
TS EN 10319-2 metallic materials - Tensile stress relief test - Part 2: Procedure for bolted joint models
TS EN 10325 Steel - Determination of increase in yield strength due to heat treatment effect [furnace hardening index]
TS EN 10328 Iron and steel - Conventional depth and hardening determination after surface treatment
TS EN ISO 12004-1 Metallic materials - Sheets and strips - Determination of forming boundary rounds - Part 1: Measurement and forming boundary diagrams in the press workshop
TS EN ISO 12004-2 Metallic materials - Sheets and strips - Determination of forming boundary rounds - Part 2: Determination of forming boundary rounds in a laboratory
TS EN 12311-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of tensile properties
TSE ISO / TR 12735-1 Mechanical testing of metals - Symbols used in conjunction with descriptions - Part 1: Symbols and descriptions in published standards
TS EN ISO 14577-1 Metallic materials - Instrument trace test for hardness and material parameters - Part 1: Test method
TS EN ISO 14577-2 Metallic materials - Instrument trace test for hardness and material parameters - Part 2: Verification and calibration of test machines
TSE ISO / TR 15461 Steel forgings - Test frequency, sampling conditions and test methods for mechanical tests
TS EN 23878 Hard metals - Vickers hardness test
TS EN 24489 Sintered hard metals - Sampling and testing
TS EN 24884 Hard metals - Sampling and testing of sintered test pieces from powders
TS EN ISO 26203-1 Metallic materials - Tensile test at high tensile speeds - Elastic rod type system
TS EN ISO 3785 Steel - Test piece axes display