The procedure principles for Flat Steel Products and Semi-Products are given below. With our understanding of service that does not compromise on quality and trust for years, our company has been testing and certification of all standards.
TS EN 10132-1 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 1: General
TS EN 10132-2 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 2: Case hardening steels
TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions
TS EN 10025-2 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
TS EN 10025-3 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels
TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions
TS EN 10160 Ultrasonic testing of flat steel products with a thickness equal to or more than 6 mm (reflection technique)
TS EN 10207 Steels for pressure vessels; Technical distribution requirements of plates, strips and bars
TS EN 10140 Cold rolled narrow steel strip - Dimensions and shape tolerances
TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes
TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for strip and strip of structural corrosion resistant steels
TS EN 10028-1 + A1 Flat steel products for pressure purposes - Part 1: General specifications
TS EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications
TS EN ISO 9444-2 Continuous hot-rolled stainless steel-Size and shape tolerances-Section 2: Wide strip and sheet / sheet
TS EN ISO 18286 Hot-rolled steel sheets - tolerances for dimensions and shapes
TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for structural corrosion-resistant steel strip / strip
TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes
TS 13512 Crowned metal covers
TS EN ISO 16120-3 Non-alloy steel - Rod - For wire conversion - Part 3: Specific requirements for low carbon steel bars of boiling and semi-boiling cast
TS EN ISO 16120-4 Non-alloy steel for bar-to-wire conversion Part 4: Specific requirements for special applications
TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions
TS EN 10025-6 + A1 Hot rolled structural steels - Part 6: Technical delivery conditions for flat products made of high yield strength structural steels in quenched and tempered condition
tst EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications
TS EN 10163-2 Flat steel products - Delivery conditions for hot rolled sheets, wide flats and profiles - Part 2: Plates and wide flats
TS EN 10163-3 Flat steel products - Delivery conditions for hot rolled sheets, wide flats and profiles section 3: Profiles
TS EN 10111 Continuous hot rolled, low carbon steel sheet and strip for cold forming - Technical delivery conditions
TS 822 Hot-dip galvanized flat and corrugated sheets
TS EN 10163-1 Surface delivery conditions for hot rolled steel sheets, wide flats and profiles - Part 1: General Specifications
TS EN 502 Roofing sheets - Metal - Fully fitted - Stainless steel sheet -
TS EN 10214 Steel tape and sheet-Continuous hot-dip zinc-Aluminum (za) coated-Technical delivery conditions
TS 13512 / T1 Crowned metal covers
TS EN 10209 Cold rolled low carbon flat steel products for vitreous enamel - Technical delivery conditions
TS EN 10209 Cold rolled low carbon flat steel products - For vitreous enamel - Technical delivery conditions
TS EN 10149-2 Flat steel products - Cold forming - Hot rolled - High yield strength steels section 2: Technical delivery conditions for thermomechanically rolled products
TS EN 10149-1 Flat steel products - Hot rolled for cold forming - High yield steels section 1: General technical delivery conditions
TS EN 10149-3 Flat steel products - Hot rolled for cold forming - High yield strength steels section 3: Technical delivery conditions for normalized or rolled normalized products
TS EN 10268 + A1 High yield cold rolled steel flat products for cold forming - Technical delivery conditions
TS EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet / plate and strip of corrosion resistant steels for general purposes
TS EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, rods, wire rods, wires, profiles and bright products of general-purpose corrosion-resistant steels
TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions
TS EN 10149-1 Flat steel products - Hot rolled for cold forming - High yield strength steels - Part 1: General technical delivery conditions
TS EN 10149-2 Flat steel products - Cold forming - Hot rolled - High yield strength steels section 2: Technical delivery conditions for thermomechanically rolled products
TS EN 10149-3 Flat steel products - Hot rolled for cold forming - High yield strength steels section 3: Technical delivery conditions for normalized or rolled normalized products
TS EN 10268 + A1 High yield cold rolled steel flat products for cold forming - Technical delivery conditions
TS EN 10107 Flat steel products - Plates, tapes and strips of oriented grain electrical steel delivered in fully processed condition
tst EN 10120 Steel plates and strips for welded gas cylinders
tkt 2015101802 Metal Clamp Systems - Aluminum Alloys and Prepainted Galvanized Steel
TS ISO 10384 Hot-rolled carbon steel sheets defined by their chemical composition
TS ISO 4999 Continuous hot-dip method coated with terne (lead alloy), cold rolled commercial, tensile and structural grade steel sheet
TS ISO 14590 Cold rolled steel sheet - High tensile strength, low yield point, improved formability
TS EN 10346 Flat rolled steel products continuously coated with hot-dip - Technical delivery conditions
TS EN 10359 Laser welded semi-finished products - Technical delivery conditions
TS EN 10338 Hot and cold rolled uncoated products of multi-phase steels used in cold forming - Technical delivery conditions
TS EN 10360 Hot, warm and cold forging - Repair conditions before shipment
TS EN 10025-2 / D1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements
TS EN 10029 Hot-rolled 3 steel sheets of mm or thicker - Dimension and shape tolerances
TS EN 10149-2 / D1 Flat steel products - Hot rolled for cold forming - High yield steels - Part 2: Technical delivery conditions for thermomechanically rolled products
TS EN 10251 Magnetic materials - Determination of geometric properties of electrical plates and bands
TS EN 10139 / D1 Steel strips - Cold rolled uncoated narrow - For soft and cold forming - Technical delivery conditions
TS EN 10139 Steel strips - Cold rolled uncoated narrow - For soft and cold forming - Technical delivery conditions
TS EN 10106 Flat rolled steel products - Cold rolled non-oriented grain electrical steel delivered in fully processed condition
TS EN 10303 Magnetic thin steel plate and strip - For use in medium frequencies
TS EN 10028-7 Flat steel products for pressure purposes - Part 7: Stainless steels
TS EN 10363 Continuous hot-rolled patterned steel and wide strip-cut strip and plate / sheet - tolerances of dimensions and shape
TS EN 10205 Cold rolled tin products - black plate
TS EN 10152 Flat rolled products of cold-rolled steel coated with electrolytic zinc for cold forming - Technical delivery conditions
TS 3051 EN 10087 Technical delivery conditions for hot-rolled steels and semi-finished products
TS 3363 Bending test of spring steel sheets and strips
TS 3812 ISO 4997 Flat steel products - Building quality - Cold rolled steel plate
TS 3812 ISO 4997 / tst T1 Flat steel products - Building quality - Cold rolled steel plate
TS 4696 Steel strips- used in spring making, cold
TS 6070 Steel sheets, bands and sheets (hot rolled, for ships)
TS 8825 Non-destructive testing-Examination of steel plates used in the manufacture of pressure vessels with ultrasonic longitudinal wave technique
TS EN ISO 9445-1 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Narrow strip and cut lengths -
TS EN ISO 9445-2 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Wide strip and sheet / sheet
TS EN ISO 9455-17 Soft solder powders - Test methods - Section 17: Surface insulation resistance comb test and displacement test of residual flux "
TS EN 10025-5 Hot rolled structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
TS EN 10025-2 / T1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
TS EN 10028-6 Flat products in steel - for pressure purposes - Part 6: Quenched and tempered, weldable fine grain steels
TS EN 10028-3 Flat products in steel - for pressure purposes - Part 3: Normalized, weldable fine grain steels
TS EN 10028-2 Flat products made of steel - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties
TS EN 10028-5 Flat steel products for pressure purposes - Part 5: Thermomechanically rolled weldable fine grain steels
TS EN 10028-4 Flat steel products for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
TS EN 10028-2 / tst AC Flat steel products - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties
TS EN 10025-3 / tst T1 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels
TS EN 10120 Steel plates and strips for welded gas cylinders
TS EN 10130 Cold rolled low carbon steel flat products - For cold forming - Technical delivery conditions
TS EN 10132-4 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications
TS EN 10132-3 Steel strips - Cold rolled - Technical delivery conditions for heat treatment applicable - Part 3: Steels for rehabilitation
tst EN 10137-2 Flat steel products of structural steel - Quenched, tempered or solid precipitated high yield strength plates and wide flats section 2: Conditions of delivery of quenched and tempered steels
TS EN 10143 Continuous hot-dipped metal coated steel strip and sheets - Size and shape tolerances