Metallurgy, Iron and Steel Products Standards

Our company provides testing, inspection, inspection and certification services with the following standards controls meticulously, reliably and quickly considering all test requirements.

TS EN 10221 Classification of surface qualities of hot rolled bars - Technical delivery conditions

TS EN 10056-2 Structural steels - L profiles and angles - Part 2: Shape and dimension tolerances

TS EN 10034 Steel and h-Profiles - Shape and dimension tolerances

TS EN 10248-1 Hot rolled sheet piles made of non-alloy steels - Part 1: Technical delivery conditions

TS EN 10248-2 Hot-rolled sheet piles made of non-alloy steels - Part 2: Shape and dimension tolerances

TS EN 10249-1 Cold formed sheet piles made of non-alloy steels - Part 1: Technical delivery conditions

TS 6814 EN ISO 1127 Pipes - Stainless steel - Dimensions, tolerances and unit length masses

TS EN 24947 Steel and cast iron-Vanadium determination-Potentiometric titration method

TS EN 524-1 Steel strip sheaths - Test methods for prestressed reinforcement - Part 1: Determination of shape and dimensions

TS EN 524-2 Steel strip sheaths - Test methods for prestressed reinforcement part 2: Determination of bending behavior

TS EN 524-5 Steel strip sheaths - Test methods for prestressed reinforcement - Part 5: Determination of resistance to tensile load

TS EN 10222-4 Forged steels - for pressure purposes - Part 4: Weldable fine grain steels with high yield strength

TS EN 10132-1 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 1: General

TS EN 10132-2 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 2: Case hardening steels

TS EN 10230-1 Steel wire nails - Part 1: Soft nails for general applications

TS EN 10250-1 Open die steel forgings for general engineering purposes - Part 1: General specifications

TS EN 10250-3 Open die steel forgings for general engineering purposes - Part 3: Alloy special steels

TS EN 10254 Steel forgings - Closed mold - General technical delivery conditions

TS EN 10278 Bright steel products - Dimensions and tolerances

TS EN 10279 Hot rolled steel profiles - shape, size and mass tolerances

TS EN 10056-2 Structural steels - L profiles and angles - Part 2: Shape and dimension tolerances

TS EN 10244-4 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 4: Tin coatings

TS EN 1503-1 Valves-Materials for housings, covers and housings-Part 1: Steels specified in European standards

TS EN 1503-2 Valves - Materials for housings, covers and housings - Part 2: Steels other than those specified in the European standard

TS EN 1503-3 / AC Valves - Materials for housings, covers and housings - Part 3: Cast irons specified in European standards

TS EN 10085 Nitriding steels - Technical delivery conditions

TS 8153 ISO 4346 Lubricants for general purpose steel wire ropes

TS EN 10160 Ultrasonic testing of flat steel products with a thickness equal to or more than 6 mm (reflection technique)

Guide to the selection of combinations of mesh mesh and wire diameter - Section 4604: General information

Guide to selection of combinations of mesh mesh and wire diameter - Section 4605: Preferred braided wire woven combinations - Section 4783 ISO 2-2

Guide to selection of combinations of screen mesh and wire diameter - Part 4606: Preferred combinations of embossed braided or pressure-welded wire sieves

TS 3061 ISO-9034 Hot rolled flat steel products - shape and dimension tolerances

TS EN 10217-1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

TS 5287-3 EN 10263-3 Steel rod, wire rod and wire for cold blow molding and cold extrusion-Part: 3: Technical delivery conditions for case-hardening steels

TS 5287-5 EN 10263-5 Steel rod, wire rod and wire for cold blowing and cold extrusion - Part 5: Technical delivery conditions for stainless steels

TS EN 12385-5 Steel wire ropes - Safety - part 5: Ropes for elevators

TS EN 12385-9 Steel wire ropes - Safety - Part 9: Clamped carrier ropes used as personnel carrier for the drawing of air lines

TS EN 10089 Hot rolled steels for quenched and tempered springs - Technical delivery conditions

TS EN 10151 Stainless steel strips - For springs - Technical delivery conditions

TS EN 12385-7 Steel wire ropes - Safety - part 7: Clamped ropes for mineral wells

TS EN 10058 Hot rolled flat steel bars for general use - Dimensions, shape and dimension tolerances

TS EN 10297-1 Seamless round steel tubes -Technical delivery conditions section 1: Alloy and non-alloy steel pipes

TS EN 10222-4 / A1 Forged steels - for pressure purposes - Part 4: High yield strength weldable fine grain steels

TS EN 10025-5 Hot rolled structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions

TS EN 10025-2 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

TS EN 10025-3 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels

tst EN 10080 (Priority 1) Concrete steel bars

TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control

TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster

TS EN 10294-1 Hollow bars for machining - Technical delivery conditions - Part 1: Non-alloy and alloy steels

TS EN 10034 Structural steel and h profiles - shape and dimension tolerances

TS EN 12385-5 / AC Steel wire ropes - Safety - Part 5: Ropes for elevators

TS EN 10217-2 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10217-1 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

TS EN 10207 Steels for pressure vessels; Technical distribution requirements of plates, strips and bars

TS EN 10140 Cold rolled narrow steel strip - Dimensions and shape tolerances

TS EN 10210-1 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 1: Technical delivery conditions

TS EN 10210-2 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and cross-sectional properties "

TS EN 10219-2 "Steel tubes - welded, cold-formed from non-alloy fine grain steels - Part 2: Tolerances, dimensions and cross-sectional properties"

TS EN 10219-1 Steel tubes - Cold welded section of welded, non-alloy fine grain steels 1: Technical delivery conditions

TS EN 10219-2 Structural steel tubes - Welded, unalloyed, welded cold-formed from fine grain steels - Part 2: Tolerances, dimensions and cross-sectional properties

TS EN 10204 Metallic products - Types of inspection and test documents

TS EN 10163-1 / AC Surface delivery conditions of flat steel sheets, wide flats and profiles section 1: General specifications

TS EN 10217-1 / A1 Steel tubes - Welded - For pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

TS EN 10028-1 + A1 Flat products in steel - for pressure purposes - part 1: General specifications

TS EN 12385-5 / AC Steel wire ropes - Safety - Part 5: Ropes for elevators

TS EN 10084 Carburizing steels - Technical delivery conditions

TS EN 10277-5 Bright steel products - Technical delivery conditions - Part 5: For quenching and tempering (steel for reclamation)

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes

TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for strip and strip of structural corrosion resistant steels

TS EN 10028-1 + A1 Flat steel products for pressure purposes - Part 1: General specifications

TS EN 10238 Steel products automatically cleaned with sand and automatically pre-primed

TS EN 12385-1 + A1 Steel wire ropes - Safety - Part 1: General requirements

TS EN 10283 Corrosion-resistant steel castings

TS EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications

TS EN 10021 Technical delivery conditions for steel products

tst EN 10168 Steel products - Inspection document - Information and identification list

TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings

TS EN ISO 9444-2 Continuous hot-rolled stainless steel-Size and shape tolerances-Section 2: Wide strip and sheet / sheet

TS EN ISO 18286 Hot-rolled steel sheets - tolerances for dimensions and shapes

TS EN ISO 15630-3 Steel - For reinforced concrete and prestressed concrete - Test methods - Part 3: Prestressing steel

TS EN ISO 15630-1 Steel - For reinforced concrete and prestressed concrete - Test methods - Part 1: Reinforcing rods, rope and wire

TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for structural corrosion-resistant steel strip / strip

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes

TS EN 10029 Hot-rolled 3 steel sheets of mm or thicker - Dimension and shape tolerances

TS EN 12385-4 + A1 Steel wire ropes - Safety - Part 4: Bundle ropes for general lifting applications

TS EN 12385-10 + A1 Steel wire ropes - Safety - Part 10: Spiral ropes used as general structural elements

Steel wire ropes - Safety - Section 12385: Operation and maintenance information

TS EN 12385-2 + A1 Steel wire ropes - Safety - Part 2: Definitions, designation and classification

TS EN 10058 / T1 Hot rolled flat steel bars for general use - Dimensions, shape and dimension tolerances

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welding) steel pipes for verification of hydraulic tightness

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Automatic eddy current testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of defects

TS EN ISO 10893-6 Non-destructive testing of steel tubes - Part 6: Radiographic examination of weld seam in welded steel tubes for the detection of defects

TS EN ISO 10893-7 Non-destructive testing of steel pipes - Part 7: Digital radiographic examination of weld seam in welded steel pipes for the detection of defects

TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects

TS EN ISO 10893-10 Non-destructive testing of steel pipes - Part 10: Automatic full environmental ultrasonic testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of longitudinal and / or transverse defects

TS EN ISO 10893-11 Non-destructive testing of steel pipes - Part 11: Automatic ultrasonic testing of weld seam in welded steel pipes for the detection of transverse and / or longitudinal defects

TS EN ISO 15630-1 Steel - for reinforced concrete and prestressed concrete - Test methods - part 1: Reinforcing rods, rope and wire

TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings

TS EN ISO 11961 Oil and gas industry - Steel drilling pipes

TS EN ISO 16120-1 Non-alloy steel - Rod - For wire conversion - Part 1: General specifications

TS EN ISO 16120-3 Non-alloy steel - Rod - For wire conversion - Part 3: Specific requirements for low carbon steel bars of boiling and semi-boiling cast

TS EN ISO 16120-4 Non-alloy steel for bar-to-wire conversion Part 4: Specific requirements for special applications

TS EN 10245-4 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire

TS EN 1559-3 Castings - Technical delivery conditions - Part 3: Additional requirements for ferrous castings

TS EN 1561 Castings-Gray (lamella graphite) cast irons

TS EN 10245-1 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules

TS EN 10245-2 Steel wire and wire products-Organic coatings on steel wire-Part 2: PVC coated wire

TS EN 10245-3 Steel wire and wire products - Organic coatings on steel wire - Part 3: Pe coated wire

TS EN 10245-5 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire

TS EN 10257-1 Steel wires - Unalloyed steel - Zinc or zinc alloy coated - Part used for the manufacture of armored energy or telecommunication cables 1: Field cables

TS EN 10270-1 Steel wires for mechanical springs - Part 1: Patent annealed, cold drawn, non-alloy steel spring wire

TS EN 10270-2 Steel wires for mechanical springs - Part 2: Oil-hardened and tempered steel spring wire

TS EN 10270-3 Steel wires for mechanical springs - Part 3: Stainless steel spring wire

TS EN 10218-1 Steel wire and wire products - General 1: Test methods

TS EN 10264-2 Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non-alloy steel wire for general purpose ropes

TS EN 10264-1 Steel wire and wire products - Steel wire for ropes - Part 1: General specifications

TS EN 10294-2 Hollow bars for machining - Technical delivery conditions - Part 1: Non-alloy and alloy steels

TS EN 10218-2 Steel wire and wire products-General-Section 2: Wire dimensions and tolerances

TS EN 10264-3 Steel wire and wire products - Steel wire for ropes - Part 3: Round and other non-alloy steel wire - For heavy duty applications

TS EN 16079 Castings - Compact graphite cast iron

TS EN 10264-4 Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire

TS EN 1562 Castings, tempered cast iron (malleable)

TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions

TS EN 10083-3 / AC Quenched and tempered steels - Part 3: Technical delivery conditions for alloy steels

TS EN 10025-6 + A1 Hot rolled structural steels - Part 6: Technical delivery conditions for flat products made of high yield strength structural steels in quenched and tempered condition

TS EN 1564 Castings - Austempered ductile cast iron

TS EN 1371-1 Casting-Liquid penetrant inspection-Part 1: Sand, non-pressure and low pressure die casting

tst EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications

TS EN 10025-6: 2004 + A1 Hot-rolled structural steels - Part 6: Technical delivery conditions for flat products made of quenched and tempered high yield strength structural steels

TS EN 10163-2 Flat steel products - Delivery conditions for hot rolled sheets, wide flats and profiles - Part 2: Plates and wide flats

TS EN 10163-3 Flat steel products - Delivery conditions for hot rolled sheets, wide flats and profiles section 3: Profiles

TS EN 10164 Steel products with improved deformation perpendicular to the product surface - Technical delivery conditions

TS EN ISO 15630-2 Steel - For reinforced concrete and prestressed concrete - Test methods - Part 2: Welded mesh steels

TS EN ISO 15630-3 Steel - For reinforced concrete and prestressed concrete - Test methods - part 3: Prestressing steel

TS EN 10111 Continuous hot rolled, low carbon steel sheet and strip for cold forming - Technical delivery conditions

TS 822 Hot-dip galvanized flat and corrugated sheets

TS EN 10270-1 Steel wires - for mechanical springs - Part 1: Patent annealed, cold-drawn, non-alloy spring steel wire

TS EN 10253-3 Butt welded pipe fittings - Part 3: Formable austenitic and austenitic-ferritic (duplex) stainless steels without special inspection

TS EN 10163-1 Surface delivery conditions for hot rolled steel sheets, wide flats and profiles - Part 1: General Specifications

TS EN ISO 1141 Ropes - Polyester - 3-, 4-, 8- and 12- sleeves

TS EN 10244-1 / AC Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles

TS EN 10223-1 Steel wires and wire products - Section for fences 1: Barbed steel wire coated with zinc and zinc alloy

TS EN 10223-2: 2012 Steel wires and wire products - for fences - Part 2: Hexagonal steel wire fences - for agricultural, separating and fencing purposes

TS EN 10223-4: 2012 Steel wire and wire products - for fences - Part 4: Welded wire mesh fences

TS EN 10223-5: 2012 Steel wire and wire products-Fence purpose-Section 5: Articulated and knotted steel wire fence

TS EN 10223-5: 2012 Steel wire and wire products-Fence purpose-Section 6: Simple twisted steel wire fence

TS EN 10223-6: 2012 Steel wire and wire products - Fence purpose - Part 6: Simple twisted steel wire fence

TS EN 10223-7 Steel wire and wire products - For wire fences - Part 7: Welded panels made of steel wire for fences

TS EN 502 Roofing sheets - Metal - Fully fitted - Stainless steel sheet -

TS EN ISO 3183: 2012 Oil and gas industries - Steel pipes for pipeline transport systems

TS EN 1503-3 Valves - Materials for housings, covers and housings - Part 3: Cast iron bars specified in European standards

TS EN 10214 Steel tape and sheet-Continuous hot-dip zinc-Aluminum (za) coated-Technical delivery conditions

TS 5071 Cast Iron Sludge Catchers

TS EN 10223-1 Steel wires and wire products - for fences - Part 1: Barbed steel wire coated with zinc and zinc alloy

TS 13512 / T1 Crowned metal covers

TS EN 10209 Cold rolled low carbon flat steel products for vitreous enamel - Technical delivery conditions

TS EN 10209 Cold rolled low carbon flat steel products - For vitreous enamel - Technical delivery conditions

TS EN 10149-2 Flat steel products - Cold forming - Hot rolled - High yield strength steels section 2: Technical delivery conditions for thermomechanically rolled products

TS EN 10149-1 Flat steel products - Hot rolled for cold forming - High yield steels section 1: General technical delivery conditions

TS EN 10149-3 Flat steel products - Hot rolled for cold forming - High yield strength steels section 3: Technical delivery conditions for normalized or rolled normalized products

TS EN 10268 + A1 High yield cold rolled steel flat products for cold forming - Technical delivery conditions

TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties

TS EN 10216-1 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

TS EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10216-3 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

TS EN 10216-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

TS EN 10216-5 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

TS EN 10223-3 Steel wires and wire products for fences - Part 3: Hexagonal steel wire mesh for civil engineering purposes

TS EN 10223-8 Steel wires and wire products for fences - Part 8: Welded mesh gabion products

TS EN ISO 10893-4 Non-destructive testing of steel pipes - Part 4: Liquid penetrant inspection of seamless and welded steel pipes for the detection of surface defects

TS EN ISO 3183 Oil and gas industries - steel pipes for pipeline transport systems

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welded) steel pipes for verification of hydraulic sealing (ISO 10893-1: 2011)

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Inspection of seamless and welded (excluding submerged arc-welded) steel pipes with automatic eddy currents for the detection of defects (ISO 10893-2: 2011)

TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects

TS EN 13411-8 Terminators for steel wire ropes - Safety - Part 8: Forged connectors and die forging

TS EN 10223-4 Steel wire and wire products for fences and nets - Part 4: Welded steel wire mesh fences

TS EN 10223-6 Steel wire and wire products for fences and nets - Part 6: Simple twisted steel wire fence

TS EN 10107 Flat steel products - Plates, tapes and strips of oriented grain electrical steel delivered in fully processed condition

TS EN ISO 16841 Steel wire ropes - eyes for rope installation Tensile - Types and minimum requirements

TS EN ISO 11960 Oil and gas industries - Casing and production pipes made of steel for boreholes

TS EN ISO 10893-11 Non-destructive testing of steel tubes - Part 11: Automatic ultrasonic inspection of welded seam in welded steel tubes for the detection of transverse and / or longitudinal defects (ISO 10893-11: 2011)

TS EN 10257-1 Steel wires - Unalloyed steel - Zinc or zinc alloy coated - Used in the manufacture of armored energy or telecommunications cables Part 1: Field cables

TS EN ISO 683-17 Heat treated steels - Alloy steels and automat steels - Part 17: for ball and cylindrical roller bearings

TS EN 1559-2 Castings - Technical delivery conditions - Part 2: Additional features for steel castings

TS EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet / plate and strip of corrosion resistant steels for general purposes

TS EN 10088-1 Stainless steels - Part 1: List of stainless steels

TS EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, rods, wire rods, wires, profiles and bright products of general-purpose corrosion-resistant steels

TS EN 10217-7 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

TS 8745 Tufted (helical cylindrical winding) and planar winding wire - Made of razor strip and wire

TS EN 13411-4 Terminators for steel wire ropes - Safety - Part 4: Sockets with metal and resin

TS EN 10223-3 Steel wires and wire products for fences - Part 3: Hexagonal steel wire mesh for civil engineering purposes

TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions

TS EN 10149-1 Flat steel products - Hot rolled for cold forming - High yield strength steels - Part 1: General technical delivery conditions

TS EN 10149-2 Flat steel products - Cold forming - Hot rolled - High yield strength steels section 2: Technical delivery conditions for thermomechanically rolled products

TS EN 10149-3 Flat steel products - Hot rolled for cold forming - High yield strength steels section 3: Technical delivery conditions for normalized or rolled normalized products

TS EN 1371-1 Casting-Liquid penetrant inspection-Part 1: Sand, non-pressure and low pressure die casting

TS EN 10216-1 Steel tubes for seamless pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

TS EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10216-3 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

TS EN 10216-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

TS EN 10216-5 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

TS EN 10223-2 Steel wires and wire products - For fences and fences - Part 2: Hexagonal steel fences - Agricultural, separating and fencing purposes

TS EN 10223-7 Steel wire and wire products - For fences and fences - Part 7: Welded steel wire panels for fencing

TS EN 10245-2 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC coated wire

TS EN 10253-2 Steel pipe fittings - Butt welded - Part 2: Special inspection requirements for non-alloy and ferritic alloy steels-Dimensions, technical delivery conditions

TS EN 10268 + A1 High yield cold rolled steel flat products for cold forming - Technical delivery conditions

TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties

TS EN ISO 11960 Oil and gas industries - Casing and production pipes made of steel for boreholes

TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods

TS EN 10293 Steel castings for general engineering uses

TS EN 1371-2 Castings-Liquid penetrant inspection-Part 2: Precision castings

TS EN 10107 Flat steel products - Plates, tapes and strips of oriented grain electrical steel delivered in fully processed condition

tst EN 10120 Steel plates and strips for welded gas cylinders

TS EN ISO 10893-6 Non-destructive testing of steel tubes - Part 6: Radiographic examination of weld seam in welded steel tubes for the detection of defects

tkt 2015101802 Metal Clamp Systems - Aluminum Alloys and Prepainted Galvanized Steel

TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods

TS EN 10346 / D2 Flat rolled steel products continuously coated by hot-dip - Technical delivery conditions

TS EN 10221 Classification of surface qualities of hot rolled bars - Technical delivery conditions

TS ISO 10384 Hot-rolled carbon steel sheets defined by their chemical composition

TS ISO 11054 Cutting tools - Brief description of high speed steel assemblies

TS ISO 4999 Continuous hot-dip method coated with terne (lead alloy), cold rolled commercial, tensile and structural grade steel sheet

TS ISO 14590 Cold rolled steel sheet - High tensile strength, low yield point, improved formability

TS ISO 7800 Metallic materials - Wire - Simple torsion test

TS EN 10346 Flat rolled steel products continuously coated with hot-dip - Technical delivery conditions

TS EN 10359 Laser welded semi-finished products - Technical delivery conditions

TS EN 10338 Hot and cold rolled uncoated products of multi-phase steels used in cold forming - Technical delivery conditions

TS EN 10360 Hot, warm and cold forging - Repair conditions before shipment

TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.

TS EN 10025-2 / D1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements

TS EN 10210-1 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 1: Technical delivery conditions

TS EN 10029 Hot-rolled 3 steel sheets of mm or thicker - Dimension and shape tolerances

TS EN 10210-2 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and cross-sectional properties "

TS EN 10149-2 / D1 Flat steel products - Hot rolled for cold forming - High yield steels - Part 2: Technical delivery conditions for thermomechanically rolled products

TS EN 10251 Magnetic materials - Determination of geometric properties of electrical plates and bands

TS EN 10139 / D1 Steel strips - Cold rolled uncoated narrow - For soft and cold forming - Technical delivery conditions

TS EN 10219-2 / D1 Structural steel tubes - Welded, unalloyed, welded cold-formed from fine grain steels - Part 2: Tolerances, dimensions and cross-sectional properties

TS EN 10139 Steel strips - Cold rolled uncoated narrow - For soft and cold forming - Technical delivery conditions

TS EN 10106 Flat rolled steel products - Cold rolled non-oriented grain electrical steel delivered in fully processed condition

TS EN 10303 Magnetic thin steel plate and strip - For use in medium frequencies

TS EN 10305-1 Steel tubes for precision applications - Technical delivery conditions - Part 1: Cold drawn seamless tubes

TS EN 10305-4: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 4: Cold drawn seamless tubes for hydraulic and pneumatic power systems

TS EN 10305-5: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 5: Cold-dimensioned, welded, square and rectangular tubes

TS EN 10305-6: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 6: Cold drawn, welded tubes for hydraulic and pneumatic power systems

TS EN 10305-2: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 2: Cold drawn welded tubes

TS EN 10305-3: 2016 Steel tubes - For precision applications - Technical delivery conditions - Part 3: Cold-dimensioned welded tubes

TS EN ISO 11970: 2016 Compliance and specification of welding procedures for welding of steel castings

TS EN ISO 7153-1 Surgical instruments - Materials - Part 1: Metals

TS EN 10228-3: 2016 Non-destructive testing of forged steels - Part 3: Ultrasonic testing of ferritic or martensitic forged steels

TS EN 10228-2: 2016 Non-destructive testing of forged steels - Part 2: Penetrant testing

TS EN 10228-4: 2016 Non-destructive testing of forged steels - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings

TS EN 10272 Stainless steel bars for pressure purposes

TS EN 10213 + A1 Steel castings for pressure purposes

TS EN 10028-7 Flat steel products for pressure purposes - Part 7: Stainless steels

TS EN 10314 Method for obtaining the lowest permanent stress values at high temperatures

TS EN 10228-1 Non-destructive testing of forged steels - Part 1: Magnetic particle inspection

TS EN 10363 Continuous hot-rolled patterned steel and wide strip-cut strip and plate / sheet - tolerances of dimensions and shape

TS EN 10205 Cold rolled tin products - black plate

TS ISO 13521 Cast steel with austenitic manganese

TS EN ISO 16440 Oil and gas industries - Pipeline transport systems - Design, construction and maintenance of steel jacketed pipelines

TS EN 10253-1 / D1 Pipe fittings - Butt welded - Part 1: General purpose formable carbon steel without special inspection

TS EN 10056-1 Structural steels - L profiles and angles - Part 1: Dimensions

TS EN 10152 Flat rolled products of cold-rolled steel coated with electrolytic zinc for cold forming - Technical delivery conditions

TS EN 10365 Hot rolled steel channels, I and H profiles - Dimensions and masses

TS EN ISO 12696 Cathodic protection of steel in concrete

TS EN 10056-2 / D1 Structural steels - L profiles and angles - Part 2: Shape and dimension tolerances

TS ISO 10474 Steel and steel products - Inspection document

TS EN 10056-1 Structural steels - L profiles and angles - Part 1: Dimensions

TS EN ISO 4885 Iron-based materials-Heat treatment - Dictionary

TS EN ISO 16120-2 Non-alloy steel - Bar - For wire conversion - Part 2: Specific requirements for general purpose bars

TS EN 40-5 Lighting poles - Part 5: Requirements for steel lighting poles

TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control

TS EN 524-3 Steel strip sheaths - Test methods for prestressed reinforcement - Part 3: Forward-backward bending test

TS EN 524-4 Steel strip sheaths - Test methods for prestressed reinforcement part 4: Determination of resistance to lateral load

TS EN 524-6 Steel strip sheaths - Test methods for prestressed reinforcement - Part 6: Water tightness determination (water loss determination)

TS 911 EN 10055 Hot rolled round steel t profiles - Dimensions, shape and dimension tolerances

TS 911 EN 10055 / tst T1 Hot-rolled steel round profiles with rounded corners - Dimensions, shape and dimension tolerances

TS ISO 2037 Stainless steel tubes for food industry

TS EN 2157-1 Aviation series-Steel-Forging draft and forging-Technical specifications; Section 1: General rules

TS EN 10025-4 Hot rolled structural steels - Part 4: Technical delivery conditions for thermomechanically rolled, fine grain weldable structural steels

TS EN 22605-3 / T1 (Number modification: TS ISO 2605-3) Pressure steel products - Determination and verification of high temperature properties - Part 3: An alternative process for obtaining high temperature yield or permanent tensile properties with limited data

TS 3051 EN 10087 Technical delivery conditions for hot-rolled steels and semi-finished products

TS 3812 ISO 4997 Flat steel products - Building quality - Cold rolled steel plate

TS 3812 ISO 4997 / tst T1 Flat steel products - Building quality - Cold rolled steel plate

TS EN ISO 4957 Tool steels

TS 5287-1 EN 10263-1 Steel rod, wire rod and wire for cold blow molding and cold extrusion-Part-1: General technical delivery conditions

TS 5287-2 EN 10263-2 Steel rod, wire rod and wire for cold blow molding and cold extrusion - Part 2: Technical delivery conditions for steels not to be subjected to heat treatment after cold treatment

TS 5287-4 EN 10263-4 Steel rod, wire rod and wire for cold blow molding and cold extrusion-Part-4: Technical delivery conditions for steels for treatment

TS ISO 5949 Tool steels and bearing steels - Micrographic method for the evaluation of the distribution of carbides using reference photomicrographs

TS ISO 5252 Steel pipes-Tolerance systems

TSE ISO / TR 7468 Summaries of the average tensile breaking properties of formable steels for boilers and pressure vessels

TS 8481 EN 39 Scaffoldings - Pipe and jointing elements - Easy to fit steel pipes - Technical delivery conditions

TS 8825 Non-destructive testing-Examination of steel plates used in the manufacture of pressure vessels with ultrasonic longitudinal wave technique

TS EN ISO 9445-1 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Narrow strip and cut lengths -

TS EN ISO 9445-2 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Wide strip and sheet / sheet

TS EN ISO 9455-17 Soft solder powders - Test methods - Section 17: Surface insulation resistance comb test and displacement test of residual flux "

TS EN 10017 Steel bars for drawing and / or cold rolling - Dimensions and tolerances

TS EN 10024 Hot rolled profiles with conical flanges-Size and shape tolerances

TS EN 10025-5 Hot rolled structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

tst EN 10155 Structural steels - Improved atmospheric corrosion resistance - Technical delivery conditions

TS EN 10025-2 / T1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

TS EN 10028-6 Flat products in steel - for pressure purposes - Part 6: Quenched and tempered, weldable fine grain steels

TS EN 10028-3 Flat products in steel - for pressure purposes - Part 3: Normalized, weldable fine grain steels

TS EN 10028-2 Flat products made of steel - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties

TS EN 10028-5 Flat steel products for pressure purposes - Part 5: Thermomechanically rolled weldable fine grain steels

TS EN 10028-4 Flat steel products for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

TS EN 10028-2 / tst AC Flat steel products - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties

TS EN 10031 Forging - Semi-finished products - Dimension, shape and mass tolerances

TS EN 10048 Steel strip - Hot rolled - Dimension and shape tolerances

TS EN 10056-2 / tst T1 Structural steels - L profiles and angles - Part 2: Tolerances on shape and size

TS EN 10059 Hot-rolled square section steel bars for general use - Dimensions, shape and dimension tolerances

TS EN 10059 / T1 Hot-rolled square section steel bars for general use - Dimensions, shape and dimension tolerances

TS EN 10060 Hot rolled round steel bars for general use - Dimensions, shape and dimension tolerances

TS EN 10061 Hot rolled hexagonal steel bars for general use - Dimensions, shape and dimension tolerances

TS EN 10067 Hot-rolled special profiles-Dimensions and tolerances of shape, dimension and mass

TS EN 10079 Definitions of steel products

TS EN 10083-1 Steels quenched and tempered - part 1: General technical delivery conditions

TS EN 10083-2 Steels for quenching and tempering - Part 2: General technical delivery conditions for non-alloy steels

TS EN 10083-3 Steels for quenching and tempering - part 3: Technical delivery conditions for alloy steels

TS EN 10084 Carburizing steels - Technical delivery conditions

TS EN 10084 / T1 Carburizing steels - Technical delivery conditions

TS EN 10090 Valve steels and alloys for internal combustion engines

TS EN 10092-1 Flat bars of hot-rolled spring steel - Part 1: Flat bars - Dimensions, shape and dimension tolerances

TS EN 10092-2 Flat bars made of hot-rolled spring steel - section 2: Ribbed and corrugated spring plates - Dimensions, shape and dimension tolerances

TS EN 10095 Heat resistant steels and nickel alloys

TS EN 10108 Round steel bar for cold blow molding and cold extrusion - Dimensions and tolerances

TS EN 10025-3 / tst T1 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels

TS EN 10025-3 / tst T1Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels

TS EN 10120 Steel plates and strips for welded gas cylinders

TS EN 10130 Cold rolled low carbon steel flat products - For cold forming - Technical delivery conditions

TS EN 10132-4 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications

TS EN 10132-3 Steel strips - Cold rolled - Technical delivery conditions for heat treatment applicable - Part 3: Steels for rehabilitation

TS EN 10132-4 / AC Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications

tst EN 10137-2 Flat steel products of structural steel - Quenched, tempered or solid precipitated high yield strength plates and wide flats section 2: Conditions of delivery of quenched and tempered steels

TS EN 10143 Continuous hot-dipped metal coated steel strip and sheets - Size and shape tolerances

TS EN 10162 Steel profiles - Cold rolled - Technical delivery conditions - Dimension and cross section tolerances

TS EN 10168 Steel products - Inspection document - Information and identification list

TS EN 10202 Cold rolled tin products - Electrolytic tin coated and electrolytic chromium / chromium oxide coated steel

TS EN 10202 / AC Cold rolled tin products - Electrolytic tin coated and electrolytic chromium / chromium oxide coated steel

TS EN 10204 Metallic products - Types of inspection documents

TS EN 10210-2 / AC Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and cross-sectional properties

TS EN 10217-2 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10217-3 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

TS EN 10217-4 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

TS EN 10217-5 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged welded non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10217-6 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 6: Submerged welded non-alloy steel tubes with specified low temperature properties

TS ISO / TR 10217 Solar energy - water heating systems - material selection guide for internal corrosion

TS EN 10217-4 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

TS EN 10217-5 / A1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged welded non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10217-3 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

TS EN 10217-6 / A1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged welded non-alloy steel tubes with specified low temperature properties

TS EN 10217-2 / T1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10217-2 / A1 Steel tubes - Welded - For pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10219-1 Structural steel tubes - welded, unalloyed, cold-formed from fine grain steels - Part 1: Technical delivery conditions

TS EN 10220 Welded steel tubes - seamless - Dimensions and masses per unit length

TS EN 10222-1 Steel forgings - Pressure regulated - Part 1: Requirements for open die forgings

TS EN 10222-2 Steel forgings-Pressure section 2: Ferritic martensitic used at high temperatures

TS EN 10222-3 Forged steels - For pressure purposes - Part 3: Nickel alloy steels with defined low temperature properties

TS EN 10222-5 Forged steels for pressure purposes - Part 5: Austenitic, martensitic and austenitic - Ferritic stainless steels

TS EN 10222-1 / A1 Forged steels - for pressure purposes - part 1: General specifications for open die forging

TS EN 10222-2 / AC Steel forgings - Pressure section 2: Ferritic martensitic used at high temperatures

TS EN 10225 Weldable structural steels for fixed off-shore structures - Technical delivery conditions

TS 4381-1 EN 10243-1 Steel mold forgings - Dimension tolerances - Part 1: Pile hammer and vertical press forging

TS 4381-2 EN 10243-2 Steel die forgings - Dimension tolerances - Part 2: Forging blow molding on horizontal forging machines

TS EN 10244-3 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminum coatings

TS EN 10244-5 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel plating

TS EN 10244-6 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings

TS EN 10250-2 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

TS EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels

TS EN 10252 Magnetic materials-Methods for measuring magnetic properties of magnetic steel sheet and strip at medium frequencies

TS EN 10253-1 Pipe fittings - Butt welded - Part 1: General purpose formable carbon steel without special inspection

TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.

TS EN 10253-4 / AC Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.

TS EN 10265 Magnetic materials - Properties of steel sheets, tapes and strips with specified magnetic permeability and mechanical properties

TS EN 10266 Steel pipes, fittings, structural hollow profiles - Symbols and descriptions for use in product standards

TS EN 10267 Ferritic-pearlitic steels - Used in engineering applications - Precipitation hardening at hot processing temperatures

TS EN 10277-1 Bright steel products - Technical delivery conditions - Part 1: General

TS EN 10277-2 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes

TS EN 10277-3 Bright steel products - Technical delivery conditions - Part 3: Automatic steels

TS EN 10277-4 Bright steel products - Technical delivery conditions - Part 4: Carburizing steels

TS EN 10278 Bright steel products - Dimensions and tolerances

TS EN 10279 Hot-rolled steel profiles - tolerances on shape, size and mass

TS EN 10295 Heat resistant steel castings

TS EN 10296-1 Welded round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes

TS EN 10296-2 Welded round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

TS EN 10296-2 / AC Welded round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

TS EN 10297-2 Seamless round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

TS EN 10297-1 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes

TS EN 10297-2 / AC Seamless round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

TS EN 10302 Creep resistant steels - Nickel and cobalt alloys

TS EN 10304 Magnetic materials (iron and steel) used in relays

TS EN 10315 Routine method for the analysis of high alloy steel by x-ray fluorescence spectrometer (xrf) using a close technique

TS 4823 EN 10323 Wire and steel products - bead

TS EN 10324 Steel wire and wire products - Hose reinforcement wire

TS EN 10324 / AC Steel wire and wire products - Hose reinforcement wire

TS EN 10340 Steel castings for structural use

TS EN 10340 / AC Steel castings for structural uses

TS EN 10341 Cold rolled sheet and strip of non-alloy and alloyed electrical steel delivered in semi-finished condition

TS EN 10342 Magnetic materials - Classification of surface insulations of electrical steel plates, strips and films

TS EN 10343 Steel - Technical delivery conditions - For quenching and tempering

TS EN 10351: 2011 Chemical analysis of ferrous materials - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method for unalloyed and low alloy steels and sec determination

TS EN ISO 10893-9: 2011 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic inspection of steel strips / plates used in the manufacture of welded tubes for the detection of planar defects

TS EN ISO 10893-4: 2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface defects

TS EN ISO 10893-12: 2011 Non-destructive testing of steel pipes - Part 12: Fully automatic automatic ultrasonic thickness examination of seamless and welded (except submerged arc welded) steel pipes

TS EN ISO 10893-5: Non-destructive testing of steel pipes - Part 2011: Magnetic particle inspection of seamless and welded ferromagnetic steel pipes for the detection of surface defects

TS EN ISO 10893-3: 2011 Non-destructive testing of steel pipes - Part 3: Automatic full perimeter leakage flux inspection of seamless and welded (except submerged arc welding) ferromagnetic steel tubes for the detection of longitudinal and / or transverse defects

TS 11348 EN 10240 Steel tubes - Internal and / or external protective coatings - Specification for hot-dip galvanized coatings applied in automated installations

TS EN 12385-6 Steel wire ropes - Safety - part 6: Bunched ropes for mineral wells

TS EN 12385-8 Steel wire ropes - Safety - part 8: Towing and pulling ropes used as personnel carriers for the towing of air lines

TS EN 12385-1 + A1 Steel wire ropes - Safety - Part 1: General requirements

TS EN 12385-2 + A1 Steel wire ropes - Safety - part 2: Definitions, designation and classification

TS EN 12385-3 + A1 Steel wire ropes - Safety - Part 3: Operation and maintenance information

TS EN 12385-10 + A1 Steel wire ropes - Safety - part 10: Spiral ropes used as general structural elements

TS EN 12385-4 + A1 Steel wire ropes - Safety - part 4: Bundle ropes for general lifting applications

TS EN ISO 12680-1 Test methods for refractory products - Part 1: Determination of dynamic young module by vibration driven pulse

TS EN 12847 Bitumens and bituminous binders - Determination of precipitation tendencies of bitumen emulsions

TS EN 12848 Bitumen and bituminous binders - determination of the stability of bitumen emulsions with cement

TS EN 13411-4: 2011 Terminators for steel wire ropes - Safety - Part 4: Sockets with metal and resin

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster

TS EN ISO 13680 / tst AC Oil and gas industry - Corrosion-resistant alloy seamless pipes - Used as casing pipe, production pipe and fitting material - Technical delivery conditions

TS EN ISO 13680: 2010 Oil and gas industry - Corrosion resistant alloy seamless pipes - Used as casing pipe, production pipe and fastener material - Technical delivery conditions

TSE ISO / TR 14321 Sintered metal materials - except hard metals - Metallographic preparation and inspection

TS EN 14782 Self-supporting sheet metal for roofs, outer claddings and interior linings

TS EN ISO 15630-2: 2010 Steel - for reinforced concrete and prestressed concrete - Test methods - Part 2: Welded mesh steels

TS EN 10253-2 Steel pipe fittings - Butt welded - Part 2: Special inspection requirements for non-alloy and ferritic alloy steels-Dimensions, technical delivery conditions

TS ISO 2605-3 (Former no: TS ENV 22605-3) Pressure steel products - Determination and verification of high temperature properties - Part 3: An alternative process for obtaining high temperature yield or permanent tensile properties with limited data

TS EN 24829-1 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method-Part 1-Samples containing 0,05% 1,0

TS EN 24943 Steel and cast iron - Determination of copper - Flame atomic absorption spectrometric method

tst EN 13411-3 AC Terminators for steel wire ropes -Security - Section 3: Straps and straps safety

TS EN 10204 Metallic products - Types of inspection and test documents

TS EN 10021 Technical delivery conditions for steel products

tst EN 10168 Steel products - Inspection document - Information and identification list

TS ISO 10474 Steel and steel products - Inspection document

TS EN ISO 4885 Iron-based materials-Heat treatment - Dictionary

TS EN 40-5 Lighting poles - Part 5: Requirements for steel lighting poles

TS EN 10079 Definitions of steel products

TS EN 10132-4 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications

TS EN 10168 Steel products - Inspection document - Information and identification list

TS EN 10204 Metallic products - Types of inspection documents

TS EN 10302 Creep resistant steels - Nickel and cobalt alloys