Metallurgy, Ferrous Metals Standards

Our company carries out the test, audit, inspection and certification of all the standards mentioned below. We carry out your test, inspection, inspection and certification processes as experienced and professional in Iron Based Metals control

TS EN 10001 Description and classification of pig iron

TS EN 24947 Steel and cast iron-Determination of vanadium-Potan

TS EN 10001 Description and classification of pig iron

TS EN ISO 10720 Determination of steel and iron-nitrogen content - Thermal conductivity method after melting under inert gas flow

TS ISO 10701 Determination of steel and iron-sulfur content-Methylene blue spectrophotometric method

TS ISO 10702 Determination of steel and iron-nitrogen content-Titrimetric method after distillation

TS 680 ISO 671 Determination of sulfur content of steel and cast iron-Titrimetric method after combustion

TSE ISO / TR 15349-1 Non-alloy steel-Low carbon-Determination of carbon content-Part 1: Infrared absorption method after burning in an electric resistant furnace

TS EN ISO 15349-2 (Formerly: TS ISO 15349-2) Unalloyed steel - Low carbon content - Determination of carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (preheating)

TSE ISO / TR 15349-3 Non-alloy steel-Low carbon-Determination of carbon content-Part 3: Infrared absorption method after burning in an electric resistant furnace (preheating)

TS 602 EN ISO 439 (Formerly: TS 602 ISO 439) Steel and iron-Determination of total silicon content-Gravimetric method

TS 2243 ISO 4941 Determination of steel and iron-Molybdenum content-Thiocyanate spectrophotometric method

TS ISO 15355 Determination of steel and iron-Chrome content-Indirect titration method

TS ISO 4942 Determination of steel and iron-Vanadium content-N-Bpha spectrophotometric method

TS EN 10325 Steel - Determination of yield strength increase by heat treatment effect

TS EN 15033 Wall-mounted water heaters for storage of hot water using lpg for vehicles and ships (storage water heaters) "

tst EN 10168 Steel products - Inspection document - Information and identification list

TS EN 1560: 2011 Castings - Short designation for cast irons - Material symbols and material numbers

TS EN 12513 Castings - Wear-resistant cast iron

TS EN 1561 Castings-Gray (lamella graphite) cast irons

TS EN 10257-2 Steel wires - Non-alloy steel - Zinc or zinc alloy coated - Used in the manufacture of armored electrical or telecommunication cables - Part 2: Submarine cables

TS EN 1563: 2011 (EN) Castings - Spheroidal graphite cast iron

TS EN 16124 Castings - Low alloyed ferritic spheroidal graphite cast iron for high temperature applications

TS EN 13835: 2012 Castings - Austenitic cast irons

TS EN 16079 Castings - Compact graphite cast iron

TS EN 1562 Castings, tempered cast iron (malleable)

TS EN 2242 Aviation series - Crimping of conductive electrical cables defined in EN 2083, EN 4434 and EN 2346

TS EN 10071 Chemical analysis methods of iron-based materials-Determination of manganese in steel and iron-electrometric titration method

TS EN 10200 Chemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometric method

TS 13644 Aluminum-based fluxes for the steel industry

TS EN 16482 Castings - Continuous cast iron bars

TSE K 400 Steel balls produced by casting method (used in grinding mills for cement, ore etc.)

TS EN 10027-2 Brief display systems for steels - Part 2: Numerical system

TS EN ISO 4829-2 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method part 2: Samples containing% 0,01-0,05 silicon

TS EN ISO 4938 Steel and iron-Nickel determination-Gravimetric or titrimetric method

TS EN ISO 4946 Steel and cast iron - Determination of copper - 2,2 dicinolyl spectrophotometric method

TSE CEN / TR 10364 Steels and cast irons - Lead, cadmium, mercury, hexavalent chromium, polybrominated biphenylene (PBB) and polybromed diphenylethylene (PBB) and polybromed diphenylethylenes (PBB) and polybromed diphenylethylenes (PBDE) - limitations

TS EN 10027-1 Short designation of steels - Part 1: Steel names

TS 601 EN 10036 Chemical analysis methods of ferrous materials - Total carbon determination in steel and iron - Gravimetric method after combustion in oxygen flow

TS 653 ISO 629 Determination of steel and cast iron-Manganese content-Spectrophotometric method

TS EN ISO 945-1 Microstructure of cast iron - Part 1: Classification of graphite by visual analysis

TS EN ISO 945-1 / AC Cast iron microstructure - Part 1: Classification of graphite by visual analysis

TS ISO 946 Gray cast iron - Notched tapping test

Steel and iron-chromium determination-Potentiometric method or titration method

TS 2922 ISO 10698 Steel - Determination of antimony content - Electrothermal atomic absorption spectrometric method

TS EN 3642 Aviation series-Rivets, filled, 100o countersunk normal dome head, titanium ti-Po2, anodized, inch based series

TS EN 3643 Aviation series-Rivets, for full 100 ° countersunk normal head, titanium ti-Po2, anodised, inch based series

TS 7148 EN ISO 4945 (Formerly: TS 7148 ISO 4945) Determination of steel-nitrogen content-Spectrophotometric method

TS 9170 EN 10181 Iron-based materials - Chemical analysis - Lead determination - Flame atomic absorption spectrometric method

TS 9171 EN 10136 Chemical analysis methods of ferrous materials-Determination of nickel in steel and iron-Flame atomic absorption spectrometric method

TS 9208 EN 10179 Chemical analysis of ferrous materials - Nitrogen (trace amounts) - Determination - Flame atomic absorption spectrophotometric method

TS 9209 EN 10178 Chemical analysis of ferrous materials-Determination of niobium in steels-Spectrophotometric method

TS EN ISO 9556 (Former number: TS ISO 9556) Steel and iron-Determination of total carbon-Induction furnace after combustion by infrared absorption method

TS ISO 9556 / T1 (Number modification, TS EN ISO 9556) Steel and iron - Determination of total carbon - By infrared absorption method after burning in induction furnace

TS ISO 9647 Determination of steel and iron-Vanadium content-Flame atomic absorption spectrometric method

TS EN 10020 Description and classification of steel types

TS EN 10168 Steel products - Inspection document - Information and identification list

TS EN 10188 Chemical analysis of ferrous materials-Determination of chromium in steel and iron-Flame atomic absorption spectrometric method

TS EN 10212 Chemical analysis of iron-based materials-Determination of arsenic in steel and iron-Spectrophotometric method

TS ISO 10278 Determination of steel-manganese content-Inductively coupled plasma atomic emission spectrometric method

TS EN ISO 10280 Steel and iron - Determination of titanium - Diantipyrilethane spectrophotometric method

TS EN 10325 Steel - Determination of increase in yield strength due to heat treatment effect [furnace hardening index]

TS EN 10349 Steel castings - Austenitic manganese steels

TS ISO 10697-1 Determination of steel calcium content by flame atomic absorption spectrometry - Part 1: Determination of acid soluble calcium content

TS EN ISO 10700 Determination of iron and steel manganese-Flame atomic absorption spectrometric method

TS EN ISO 10714 Steel and iron - Determination of phosphorus content - phosphovanadomolybdate spectrophotometric method

TSE ISO / TR 10719 Determination of steel and iron-Free carbon content-Infrared absorption method after combustion in induction furnace

TS ISO 10720 / T1 (Number modification: TS EN ISO 10720) Determination of steel and iron-nitrogen content-Thermal conductivity method after melting under inert gas stream

TS ISO 11652 Steel and iron - Determination of cobalt content - Flame atomic absorption - Spectrometric method

TS ISO 11653 Steel - Determination of high cobalt content - Potentiometric titration method after separation with ion exchanger

TS ISO 13898-1 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 1: General rules and sample dissolution

TS ISO 13898-2 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 2: Determination of nickel content

TS ISO 13898-3 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 3: Determination of copper content

TS ISO 13898-4 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 4: Determination of cobalt content

TS EN ISO 13900 (Former no: TS ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation

TS ISO 13900: 2001 / T1 (Number modification, TS EN ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation

TS ISO 13902 Steel and iron - Determination of high sulfur content - Infrared absorption method after incineration in an induction furnace

TS EN ISO 14284 (Formerly: TS ISO 14284) Sampling and preparation of steel and iron for the determination of chemical composition

TS ISO 14284: 1999 / T1 (Number modification, TS EN ISO 14284) Steel and iron - Sampling and preparation for determination of chemical composition

TS ISO 15349-2: 2003 / T1 (Number modification, TS EN ISO 15349-2) Non-alloy steel-Low carbon-Determination of carbon content-Part 2: Infrared absorption method after combustion in an induction furnace (preheating)

TS EN ISO 15351 Steel and iron - Determination of nitrogen content - Thermal conductivity after melting under inert gas flow (routine method)

TS EN 24829-1 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method-Part 1-Samples containing 0,05% 1,0

TS EN 24935 Determination of steel and iron-Sulfur-Infrared absorption method after incineration in an induction furnace

TS EN 24943 Steel and cast iron - Determination of copper - Flame atomic absorption spectrometric method

TS EN 24947 Steel and cast iron - Determination of vanadium content - potentiometric titration method

TS EN 29658 Determination of steel-aluminum content-Flame atomic absorption spectrometer method