We carry out your certification procedures by completing the tests by applying all the required methods with our personnel who have all the operations specified in the standard of Non-Ferrous Metals.
TS EN 2334 Aviation series-Aluminum and aluminum alloys with chromic-Sulfuric acid cleaning
TS EN 2070-6 Aerospace series - Aluminum, aluminum alloy, formable products technical specifications part 6: Rivet wire
TS EN 2070-5 Aerospace series-Aluminum and aluminum alloys-Formable products technical specifications part 5: Pipes used under pressure
TS 953 EN 586-2 Aluminum and aluminum alloys-Forged parts part 2: Mechanical properties and other properties
TS EN 2070-7 Aerospace series - Aluminum and aluminum alloy shaped products technical specifications part 7: Forging drafts
TS EN 485-4 Aluminum and aluminum alloys band, strip and sheet section 4: Cold rolled dimensions and tolerances
TS ISO 4739 Copper and copper alloy products-Formed-Selection and preparation of test specimens and test pieces for mechanical tests
TS ISO 11400 Nickel, ferronickel and nickel alloys-Determination of phosphorus content-Phosphovanadomolybdate molecular absorption spectrometric method
TS EN 573-1 Chemical composition of aluminum and aluminum alloys and the shape of shaped articles - Part 1: Numerical short display system
TS EN 573-2 Aluminum and aluminum alloys -Chemical composition and form of formed products-Section 2: Brief display system based on chemical symbol
TS EN ISO 196 Formed copper and copper alloys - Determination of residual stress - Mercury (I) nitrate test
TS EN 1655 Copper and copper alloys - Declaration of conformity
TS 1695 EN ISO 2624 Copper and copper alloys-Determination of average grain size
TS 8848 EN 988 Zinc and zinc alloys - Properties of rolled flat products used in buildings
TS 491 EN 610 Tin and tin alloys- ingot tin
Surgical implants - Metallic materials - Part 5832: Non-alloy titanium TS EN ISO 2-9371 (Former number: TS 5832 ISO 2-2)
TS 5181 EN 12659 Lead and lead alloys
Zinc and zinc alloys - Chemical analyzes - Part 3177: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
TS 4245 ISO 4192 Aluminum and aluminum alloys-Determination of lead content-Flame atomic absorption spectrometric method
Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in zinc alloys - Spectrophotometric method
Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in primary zinc - Spectrophotometric method
TS EN 12441-6 Zinc and zinc alloys - Chemical analysis department 6 - Determination of aluminum and iron - Flame atomic absorption spectrophotometric method
TS EN 13283 Zinc and zinc alloys - Secondary zinc
TS EN 13920-2 Aluminum and aluminum alloys - Scrap - Part 2: Non-alloy aluminum scrap
TS EN 13920-3 Aluminum and aluminum alloys - Scrap - Part 3: Wire and cable scrap
TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap
TS EN 13920-5 Aluminum and aluminum alloys - Scrap - Part 5: Two or more types of alloy scrap of the same series
TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap
TS EN 13920-7 Aluminum and aluminum alloys - Scrap - Part 7: Cast iron scrap
TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap
TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap
TS EN 13920-10 Aluminum and aluminum alloys - Scrap - Part 10: Aluminum cans of waste beverage
TS EN 13920-11 Aluminum and aluminum alloys - Scrap - Part 11: Aluminum-copper radiator scrap
TS EN 13920-12 Aluminum and aluminum alloys - Scrap - Part 12: Single alloy scrap shavings
TS EN 13920-13 Aluminum and aluminum alloys - Scrap - Part 13: Two or more alloy scrap shavings
TS EN 13920-14 Aluminum and aluminum alloys - Scrap - Part 14: Aluminum packaging scrap
TS EN 13920-15 Aluminum and aluminum alloys - Scrap - Part 15: Aluminum packaging scrap from the coating
TS EN 13920-16 Aluminum and aluminum alloys - Scrap - Part 16: Scrap grade slag, dros and debris
TS EN 12258-3 Classification of aluminum and aluminum alloy scrap
TS EN 14290 Zinc and zinc alloys - secondary raw materials
TS EN 14939 copper and copper alloys - Determination of beryllium content - Faas method
TS EN 15034 Heating boilers condensing heating boilers for fuel oill
TS EN 573-5 Aluminum and aluminum alloys - Chemical composition and shape of formable products - Part 5: Coding of shaped products
TS EN 14938-2 Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (faas)
TS EN 15025 Copper and copper alloys - Determination of magnesium content - Part 2: Flame atomic absorption spectrometric method (faas)
TS EN 15605 Copper and copper alloys - Inductively coupled plasma optical emission spectrometer
TS EN 15915 Copper and copper alloys - Determination of silver - Flame atomic absorption spectrometry (FAAS)
TS EN 15916-2 Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (faas)
TS EN 13283 Zinc and zinc alloys - Secondary zinc
TS 491 EN 610 / T2 Tin and tin alloys - Ingot tin
TS EN 16090: 2011 Copper and copper alloys - Estimation of average particle size by ultrasound
TS EN 15022-4 Copper and copper alloys-Determination of tin content-Part 4: Medium tin content-Flame atomic absorption method (faas)
TS ISO 2393 Rubber test mixtures - Preparation, mixing and solidification - Materials and methods
TS EN 16117-1 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with a copper content of less than 99,85%
TS ISO 1178 Magnesium and magnesium alloys - Chemical analysis - Determination of soluble zirconium (alizarin sulfonate photometric method)
TS EN 15616: 2012 Copper alloys-Cadmium determination-Flame atomic absorption spectrophotometric method
TS EN 16117-2: 2012 Copper and copper alloys-Determination of copper content-Part 2: Determination of copper by electrolytic method in materials with a copper content higher than 99,80%
TS EN 573-3 Aluminum and aluminum alloys - Chemical composition and shape of formable products - Part 3: Chemical composition
tst EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms
TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties
TS EN 573-3 Aluminum and aluminum alloys - Chemical composition and form of forging products - Part 3: Chemical composition and form of products
TS EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms
TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties
TS EN 15063-1 Copper and copper alloys - Determination of principal components and impurities by wavelength-separated x-ray fluorescence spectrometry - Part 1: Guide for routine method
TS EN 15703-2 Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometry method (AAAS)
Zinc and zinc alloys - Characteristics of rolled flat products used in buildings
TS ISO 7530-1 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 1: General rules and sample dissolution
TS EN 15079 Copper and copper alloys - Analysis by spark-based optical emission spectrometer (S-OES)
TS EN 1754 Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Short demonstration system
TS EN 1412 Copper and copper alloys - European numbering system
tst 7000 Trinket - Manufacture of precious metals and alloys
TS EN 12421 Magnesium and magnesium alloys - Non-alloy magnesium
TS EN 515 Aluminum and aluminum alloys - Formable products - Temper briefs
TS 491 EN 610 / tst T2 Tin and tin alloys- ingot tin
TS EN 573-1 Aluminum and aluminum alloys - chemical composition and form of products which can be formed - part 1: Numerical designation system
TS EN 573-2 Aluminum and aluminum alloys - chemical composition and shape of products which can be formed - part 2: Chemical symbol based brief display system
TS EN 573-4 Aluminum and aluminum alloys - chemical composition and shape of formable products - part 4: Shape of products
TS EN 577 Aluminum and aluminum alloys-Liquid metal-Specifications
TS 783 ISO 715 Determination of Zinc-Lead content-Polarographic method
TS ISO 791 Magnesium alloys - Determination of aluminum - 8-Hydroxyquinoline gravimetric method
TS ISO 792 Magnesium and magnesium alloys - Determination of iron - Orthophenanthroline photometric method
TS ISO 793 Aluminum and aluminum alloys - Determination of iron - Orthophenanthroline photometric method
TS ISO 794 Magnesium and magnesium alloys - Determination of copper content - Oxyldihydrazide photometric method
TS ISO 795 Aluminum and aluminum alloys - Determination of copper content - Oxyldihydrazide photometric method
TS ISO 796 Aluminum alloys - Determination of copper - Electrolytic method
TS ISO 797 Aluminum and aluminum alloys - Determination of silicon - Gravimetric method
TS ISO 808 Aluminum and aluminum alloys - Determination of silicon - Spectrophotometric method with reduced silicomolybdic complex
TS 1045 ISO 1053 Determination of zinc-copper content-spectrophotometric method
Zinc and zinc alloys - Chemical analysis - Part 1122: Determination of aluminum in zinc alloys - Titrimetric method
TS EN 1173 Copper and copper alloys - Brief indication of material condition
TS EN 1179 Zinc and zinc alloys - Primary zinc
TS ISO 1190-1 Copper and copper alloys - Short designation code - part 1: Material designation
TS EN 1254-1 Copper and copper alloys - Pipe fittings - Part 1: Hard or soft soldered fittings to copper pipes
TS 1385 ISO 2135 Anodic oxidation of aluminum and aluminum alloys (anodized coating) - Accelerated determination of light fastness of colored anodic oxide coatings using artificial light
TS EN 1503-4 Valves-Materials for housings, covers and housings-Part 4: Copper alloys specified in standards
TS ISO 1554 Formable and cast copper alloys - Determination of copper content - Electrolytic method
TS EN 1774 Zinc and zinc alloys - alloys for foundry purposes - ingot and liquid
TS ISO 1976 Zinc alloys - Determination of copper content - Electrolytic method
TS EN 1981 Copper and copper alloys - Pre-alloys
TS EN 2076-2 Aviation series; Aluminum and magnesium alloy ingots and castings - Technical specifications section 2: Ingots for remelting
TS EN 2076-2 Aviation series; Aluminum and magnesium alloy ingots and castings - Technical specifications section 2: Ingots for remelting
TS 2276 ISO 3116 Magnesium and magnesium alloys - formable magnesium alloys
TS ISO 2354 Magnesium alloys - Determination of insoluble zirconium - Alizarin sulfonate photometric method
TS ISO 2543 Copper and its alloys-Determination of manganese-Spectrophotometric method
TS EN 2633 Aviation series-Al-P2024-T3511 aluminum alloy, with lateral coarse particle control, 1,2 mm
TS 2675 EN 12373-7 Aluminum and aluminum alloys - Anodic oxidation (anodizing coating) - Part 7: Quality assessment by measuring the loss of mass after dipping into acid phosphoric acid / chromic acid solution after pore closure of acid pretreated coatings
TS 2780 EN ISO 2626 Copper-Hydrogen brittleness test
TS ISO 3110 Copper alloys - Determination of aluminum - Volumetric method
Zinc and zinc alloys - Part 3815: Analysis of solid samples by optical emission spectrometry
TS EN ISO 3815-2 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometer
TS ISO 5454 Ferrotitan specifications and technical delivery conditions
TS ISO 6372-1 Nickel and nickel alloys-Terms and recipes section 1: Materials
TS ISO 6372-2 Nickel and nickel alloys - Terms and definitions section 2: Refined products
TS ISO 6372-3 Nickel and nickel alloys - Terms and definitions section 3: Formable products and castings
TS ISO 6957 Copper alloys - Ammonia test for tensile corrosion resistance
TS ISO 7156 Refined nickel - Sampling
TS 7216 ISO 4382-2 Plain bearings - Copper alloys Section 2: Formable copper alloys for solid plain bearings
TS ISO 7528 Nickel alloys - Determination of iron content - Titrimetric method with potassium dichromate
TS ISO 7529 Nickel alloys - Determination of chromium content - Potentiometric titration method with ammonium iron (II) sulfate
TS ISO 7530-7 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 7: Determination of aluminum content
TS ISO 7530-8 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 8: Determination of silicon content
TS ISO 7530-9 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 9: Determination of vanadium content
TS 7602 EN 27526 Nickel, ferronickel and nickel alloys - Determination of sulfur content Infrared absorption method after combustion in an induction furnace
TS 7603 EN 27527 Nickel, ferronickel and nickel alloys - Determination of sulfur - Iodimetric titration method after incineration in an induction furnace
TS 7762 ISO 3980 Aluminum and aluminum alloys - Determination of copper - Atomic absorption spectrophotometric method
TS 8847-1 EN 611-1 Tin and tin alloys - Pewter and pewter tools - Section 1: Pewter
TS 9335 ISO 4381 plain bearings - lead and tin casting alloys for multi-layer plain bearings
TS 9373 ISO 5832-6 Surgical implants - Metallic materials - Section 6: Machinable cobalt-Nickel-Chromium-Molybdenum alloy
9374 ISO 5832-8 Surgical implants - Metallic materials section 8: Formable cobalt - Nickel - Chromium - Molybdenum - Tungsten - Iron alloy
TS ISO 9388 Nickel alloys - Determination of phosphorus content - Molybdenum blue molecular absorption spectrometric method
TS EN ISO 9400 Nickel based alloys - Determination of corrosion resistance between particles
TSE ISO / TR 9721 Nickel and nickel alloys - Material description rules based on chemical symbols
TS EN 10095 Heat resistant steels and nickel alloys
TS EN 10302 Creep resistant steels - Nickel and cobalt alloys
TS EN 10304 Magnetic materials (iron and steel) used in relays
TS ISO 10387 Metallic chrome- specifications and delivery conditions
TSE ISO / TR 11434 Nickel alloys- Determination of niobium and tantalum - Ion exchange method
TSE ISO / TR 11434 Nickel alloys- Determination of niobium and tantalum - Ion exchange method
TS ISO 11436 Nickel and nickel alloys-Determination of total boron content-Molecular absorption spectrometric method using Kürkumin
TS ISO 11437-1 Nickel alloys-Determination of trace elements-Electrothermal atomic absorption spectrometric method part 1: General rules and dissolution of sample
TS ISO 11437-2 Nickel alloys-Determination of trace elements-Electrothermal atomic absorption spectrometric method-Part 2: Determination of lead content
TS EN 12060 Zinc and zinc alloys - Sampling method - Rules
TS ISO 12169 Nickel oxide - Determination of nickel content - Electrolytic deposition method
TS EN 12258-2 Aluminum and aluminum alloys - Terms and definitions - Part 2: Chemical analysis
TS EN 12258-4 Aluminum and aluminum alloys - Terms and definitions - Part 4: Residues of the aluminum industry
TS EN 12258-3 Aluminum and aluminum alloys - Terms and definitions - Part 3: Scrap
TS EN 12402 Lead and lead alloys - Sampling methods for analysis
TS EN 12438 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
TS EN 12441-5 Zinc and zinc alloys - Chemical analysis - part 5: Determination of iron in primary zinc - Spectrophotometric method
TS EN 12441-6 Zinc and zinc alloys - Chemical analysis department 6 - Determination of aluminum and iron - Flame atomic absorption spectrophotometric method
TS EN 12441-7 Zinc and zinc alloys - Chemical analysis - Part 7 - Determination of tin - Flammable atomic absorption spectrometric method after extraction TS
TS EN 12441-8 Zinc and zinc alloys - Chemical analysis - Part 8 - Determination of secondary tin in zinc - Atomic absorption of flames
TS EN 12441-10 Zinc and zinc alloys - Chemical analysis department 10 - Determination of chromium and titanium in zinc alloy - Spectrophotometric method "
TS EN 12441-11 Zinc and zinc alloys - Chemical analysis - Part 11 - Determination of silicon in zinc alloy - Spectrometric method
Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in zinc alloys - Spectrophotometric method
Zinc and zinc alloys - Chemical analysis - Part 12441 - Determination of nickel in zinc alloy - Flame atomic absorption spectrometric method
Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of aluminum in zinc alloys - Titrimetric method - Part 1-1 / A1
Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
TS ENV 12908 Lead and lead alloys-Spark-excited-Optical emission spectrometry (oes) analysis
TS EN 12938 Tin-Alloys-Analysis methods-Determination of alloy and impurity elements by atomic spectrometry
TS ENV 13800 Lead and lead alloys - Flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es) with lead-free analysis
TS EN 13920-2 Aluminum and aluminum alloys - Scrap - part 2: Non-alloy aluminum scrap
TS EN 13920-3 Aluminum and aluminum alloys - Scrap - part 3: Wire and cable scrap
TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap
TS EN 13920-5 Aluminum and aluminum alloys - Scrap - section 5: Two or more types of alloy scrap from the same series
TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap
TS EN 13920-7 Aluminum and aluminum alloys - Scrap - part 7: Cast iron scrap
TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap
TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap
TS EN 13920-1 Aluminum and aluminum alloys - Scrap - part 1: General specifications, sampling and tests
TS EN 13920-11 Aluminum and aluminum alloys - Scrap - part 11: Aluminum-copper radiator scrap
TS EN 13920-12 Aluminum and aluminum alloys - Scrap - part 12: Single alloy scrap shavings
TS EN 13920-13 Aluminum and aluminum alloys - Scrap - part 13: Two or more alloy scrap shavings
TS EN 13920-14 Aluminum and aluminum alloys - Scrap - part 14: Aluminum packaging scrap
TS EN 13920-15 Aluminum and aluminum alloys - Scrap - part 15: Aluminum packaging scrap cleaned from the coating
TS EN 13920-16 Aluminum and aluminum alloys - Scrap - part 16: Scrap grade slag, dros and debris
TS EN 13920-10 Aluminum and aluminum alloys - Scrap - part 10: Waste beverage aluminum cans
TS ENV 14029 Lead and lead alloys - Analysis of the lead after removal of lead by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES)
TS ENV 14138 Lead and lead alloys - Analysis with flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es)
TS EN 14242 Aluminum and aluminum alloys - Chemical analysis - Inductive coupling plasma optical emission spectral analysis
TS EN 14361 Aluminum and aluminum alloys - Chemical analysis - Sampling of metal melts
TS EN 14726 Aluminum and aluminum alloys - Chemical analysis - Rules for the optical emission spectrometric analysis of sparks.
TS EN 14935 Copper and copper alloys - Determination of impurities in pure copper - Et aas method
TS EN 14936-1 Copper and copper alloys - Determination of aluminum content - Et aas method
TS EN 14936-2 Copper and copper alloys - Determination of aluminum content - Part 2: Faas method
TS EN 14937-1 Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method
TS EN 14937-2 Copper and copper alloys - Determination of antimony content - Part 2: Faas method
TS EN 14940-2 Copper and copper alloys - Determination of chromium content - Part 2: Faas method
TS EN 14941 Copper and copper alloys - Determination of cobalt content - Faas method
TS EN 14942-2 Copper and copper alloys - Determination of arsenic content - Part 2: Faas method
TS EN 15022-3 Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption method (faas)
TS EN 15023-3: 2010 Copper and copper alloys - Determination of nickel content - Part 2: Flame atomic absorption spectrometric method (faas)
TS EN 15024-2 Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption method (faas)
TS EN 15063-2 Copper and copper alloys - Determination of main components and impurities by wavelength-separated x-ray fluorescence spectrometry - Part 2: Routine method
TS EN 15622 Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometry (FAAS) method
TS EN 15690-2 Ductile iron pipes, fittings and accessories - Internal polyurethane liner for pipes and fittings - Features and test methods
TS EN 10302 Creep resistant steels - Nickel and cobalt alloys