• +90 212 702 00 00
  • +90 532 281 01 42
  • I info@muayene.co
trarbgzh-TWenfrkadefaru

Metallurgical Standards

We provide inspection, testing, inspection and certification services to all standards of metallurgy regulations. 

All of these standards are listed below.

 

TS ISO 9935 Non-destructive testing-Penetrant error detectors-General technical conditions 

TS EN 2070-5 Aerospace series-Aluminum and aluminum alloys-Formable products technical specifications part 5: Pipes used under pressure 

TS 953 EN 586-2 Aluminum and aluminum alloy TS EN 10056-2 Structural steels - L profiles and angles - Part 2: Shape and dimension tolerances 

TS EN 10034 Steel and h-Profiles - Form and size tolerances - Forged parts part 2: Mechanical properties and other properties

S EN 27627-3 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 3: Determination of sobalt, iron, manganese and nickel content in the range of% 0,01-% 0,5 (m / m) 

TS EN 27627-2 Hard metals-Chemical analysis by flame atomic absorption spectrometer-Part 2: Determination of calcium, potassium, magnesium and sodium content in the range of% 0,001-% 0,02 (m / m) 

TS EN 27627-1 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 1: General rules 

TS EN 27627-4 Hard metals-Chemical analysis by flame atomic absorption spectrometer-Part 4: Determination of the content of molybdenum, titanium and vanadium in the range of% 0,01 to% 0,5 (m / m) 

TS EN 10248-1 Hot rolled sheet piles made of non-alloy steels - Part 1: Technical delivery conditions 

TS EN 10248-2 Hot-rolled sheet piles made of non-alloy steels - Part 2: Shape and dimension tolerances 

TS EN 10249-1 Cold formed sheet piles made of non-alloy steels - Part 1: Technical delivery conditions 

TS EN 10249-2 Cold formed sheet piles made of non-alloy steels - Part 2: Tolerances on shape and size 

TS EN 27627-6 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 6: Determination of chromium content in the range of% 0,01 to% 0,2 (m / m)

TS ISO 4739 Copper and copper alloy products-Formed-Selection and preparation of test specimens and test pieces for mechanical tests

TS EN ISO 11125-4 Preparation of steel surfaces Test methods for metallic air abrasive blast cleaning prior to the application of paints and related materials Part 4: Determination of apparent density 

TS EN ISO 11125-5 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 5: Determination of percentage of defective particles and microstructures 

TS EN ISO 11125-6 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 6: Determination of foreign matter 

TS EN ISO 11125-7 Preparation of steel surfaces - Before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 7: Determination of moisture 

TS EN 485-4 Aluminum and aluminum alloys band, strip and sheet section 4: Cold rolled dimensions and tolerances 

TS EN 485-4 Aluminum and aluminum alloys band, strip and sheet section 4: Cold rolled dimensions and tolerances 

TS EN 23312 Sintered metal and hard metals detection of young module 

TS EN 24003 Metal materials - Permeable sintered - Determination of pore size by bubble test 

TS 6936 EN 24506 Hard metals - Compression test 

TS EN 2334 Aviation series-Aluminum and aluminum alloys with chromic-Sulfuric acid cleaning

TS ISO 3453 Non-destructive testing-Penetrant inspection-Verification procedures 

TS EN ISO 196 Formed copper and copper alloys - Determination of residual stress - Mercury (I) nitrate test

TS EN ISO 196 Formed copper and copper alloys - Determination of residual stress - Mercury (I) nitrate test 

TS 6814 EN ISO 1127 Pipes - Stainless steel - Dimensions, tolerances and unit length masses 

TS EN 1655 Copper and copper alloys - Declaration of conformity 

TS EN ISO 11125-1 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air section 1: Sampling 

TS EN 27627-5 Hard metals - Chemical analysis by flame atomic absorption spectrometer - Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium content in the range of% 0,5 to% 2 (m / m) 

TS 1695 EN ISO 2624 Copper and copper alloys-Determination of average grain size 

TS 1695 EN ISO 2624 Copper and copper alloys-Determination of average grain size 

TS ISO 3713 Iron alloys-Sampling and preparation-General rules 

TS ISO 4552-2 Ferro alloys - Sampling and sample preparation for chemical analyzes-Ferrotiton, ferromolybdenum, ferrovolfram, feronryobium, ferrovanadium. 

TS ISO 4552-1 Ferro alloys - Sampling and sample preparation for chemical analysis, ferrochromium, ferrosiliconochrome, ferrosilicon, ferrosilicon

TS EN 2070-6 Aerospace series - Aluminum, aluminum alloy, formable products technical specifications part 6: Rivet wire 

TS EN 2070-7 Aerospace series - Aluminum and aluminum alloy shaped products technical specifications part 7: Forging drafts 

TS ISO 11400 Nickel, ferronickel and nickel alloys-Determination of phosphorus content-Phosphovanadomolybdate molecular absorption spectrometric method

TS 8848 EN 988 Zinc and zinc alloys - Properties of rolled flat products used in buildings 

TS 8848 EN 988 Zinc and zinc alloys - Properties of rolled flat products used in buildings 

TS EN 10001 Description and classification of pig iron 

TS EN 10221 Classification of surface qualities of hot rolled bars - Technical delivery conditions 

TS EN 10221 Classification of surface qualities of hot rolled bars - Technical delivery conditions

TS EN 524-1 Steel strip sheaths - Test methods for prestressed reinforcement - Part 1: Determination of shape and dimensions 

TS EN 524-2 Steel strip sheaths - Test methods for prestressed reinforcement part 2: Determination of bending behavior 

TS EN 524-5 Steel strip sheaths - Test methods for prestressed reinforcement - Part 5: Determination of resistance to tensile load

TS EN 10229 Steel products - Evaluation of resistance to hydrogen fragility

TS EN 24159 Determination of ferromanganese and ferrosilicon-Manganese content-Potentiometric method

TS EN 10132-1 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 1: General 

TS EN 10132-1 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 1: General 

TS EN 10132-2 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 2: Case hardening steels 

TS EN 10132-2 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 2: Case hardening steels 

TS EN 10230-1 Steel wire nails - Part 1: Soft nails for general applications 

TS EN 10250-1 Open die steel forgings for general engineering purposes - Part 1: General specifications 

TS EN 10250-3 Open die steel forgings for general engineering purposes - Part 3: Alloy special steels 

TS EN 10250-3 Open die steel forgings for general engineering purposes - Part 3: Alloy special steels 

TS EN 10254 Steel forgings - Closed mold - General technical delivery conditions 

TS EN 10275 Metallic materials-Pipe ring hydraulic pressure test 

TS EN 573-1 Chemical composition of aluminum and aluminum alloys and the shape of shaped articles - Part 1: Numerical short display system 

TS EN 573-1 Chemical composition of aluminum and aluminum alloys and the shape of shaped articles - Part 1: Numerical short display system 

TS EN 573-2 Aluminum and aluminum alloys -Chemical composition and form of formed products-Section 2: Brief display system based on chemical symbol 

TS EN 573-2 Aluminum and aluminum alloys -Chemical composition and form of formed products-Section 2: Brief display system based on chemical symbol 

TS EN 10222-4 Forged steels - for pressure purposes - Part 4: Weldable fine grain steels with high yield strength 

TS EN 10222-4 Forged steels - for pressure purposes - Part 4: Weldable fine grain steels with high yield strength 

TS EN 1592-1 Aluminum and aluminum alloys - Hf (high frequency) seam welded tubes - Part 1: Technical requirements for inspection and delivery

 

TS EN 24947 Steel and cast iron-Vanadium determination-Potentiometric titration method 

TS EN 24947 Steel and cast iron-Vanadium determination-Potentiometric titration method 

TS EN 12861 Copper, copper alloys - Scrap

TS EN 10278 Bright steel products - Dimensions and tolerances 

TS EN 10279 Hot rolled steel profiles - shape, size and mass tolerances 

TS EN 12384 Copper and copper alloys - Determination of the bending limit of strips 

TS 4277 EN 25754 Sintered metal materials - Except hardmetals - Notched impact test piece 

TS 4277 EN 25754 Sintered metal materials - Except hardmetals - Notched impact test piece 

TS EN 10001 Description and classification of pig iron 

TS 6441 EN 23312 Sintered metal materials and hard metals - Determination of Young's modulus 

TS 6441 EN 23312 Sintered metal materials and hard metals - Determination of Young's modulus 

TS EN 10056-2 Structural steels - L profiles and angles - Part 2: Shape and dimension tolerances 

TS EN 10244-4 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 4: Tin coatings

TS EN 504 Roofing sheets - Metal - Fits all - Copper sheets -

TS EN ISO 2566-2 Steel - Conversion of elongation values ​​- Part 2: Austenitic steels 

TS EN ISO 7799 Metallic materials - 3 mm thickness or thinner - Reverse bending test

TS 8153 ISO 4346 Lubricants for general purpose steel wire ropes

TS EN 10055 Hot-rolled angled flanges with rounded edges - Dimension and shape tolerances

TS EN 10160 Ultrasonic testing of flat steel products with a thickness equal to or more than 6 mm (reflection technique) 

TS EN 10160 Ultrasonic testing of flat steel products with a thickness equal to or more than 6 mm (reflection technique) 

TS EN ISO 11463 Corrosion of metals and alloys-Evaluation of hollow corrosion

TS 3061 ISO-9034 Hot rolled flat steel products - shape and dimension tolerances

Surgical implants - Metallic materials - Part 5832: Non-alloy titanium TS EN ISO 2-9371 (Former number: TS 5832 ISO 2-2) 

TS 4481 EN 23923-2 Metallic powders- Determination of apparent density- Part 1: Funnel method 

TS EN 1503-1 Valves-Materials for housings, covers and housings-Part 1: Steels specified in European standards 

TS EN 1503-2 Valves - Materials for housings, covers and housings - Part 2: Steels other than those specified in the European standard 

TS EN 1503-3 / AC Valves - Materials for housings, covers and housings - Part 3: Cast irons specified in European standards 

TS 491 EN 610 Tin and tin alloys- ingot tin 

TS 1381 EN ISO 642 Hardenability test by applying water to the steel tip (jomin test) 

TS 5181 EN 12659 Lead and lead alloys 

TS EN ISO 10720 Determination of steel and iron-nitrogen content - Thermal conductivity method after melting under inert gas flow

TS EN ISO 10714 Determination of steel and iron-phosphorus content-Phosphovanadomolybdate spectrometric method 

TSE ISO / TR 15349-1 Non-alloy steel-Low carbon-Determination of carbon content-Part 1: Infrared absorption method after burning in an electric resistant furnace

Guide to the selection of combinations of mesh mesh and wire diameter - Section 4604: General information

 

Guide to selection of combinations of mesh mesh and wire diameter - Section 4605: Preferred braided wire woven combinations - Section 4783 ISO 2-2 

Guide to selection of combinations of screen mesh and wire diameter - Part 4606: Preferred combinations of embossed braided or pressure-welded wire sieves 

TS 3088 ISO 3763 Formable steels - Macroscopic methods for the determination of non-metallic inclusions 

TS EN 10217-1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

TS EN 40-6 Lighting poles - Part 6: Requirements for aluminum lighting poles 

TS ISO 4942 Determination of steel and iron-Vanadium content-N-Bpha spectrophotometric method 

TS EN 12681 Casting; Radiographic examination 

TS EN 12385-5 Steel wire ropes - Safety - part 5: Ropes for elevators 

TS EN 12385-9 Steel wire ropes - Safety - Part 9: Clamped carrier ropes used as personnel carrier for the drawing of air lines 

TS EN 10089 Hot rolled steels for quenched and tempered springs - Technical delivery conditions 

TS EN 10151 Stainless steel strips - For springs - Technical delivery conditions 

TS EN 12385-7 Steel wire ropes - Safety - part 7: Clamped ropes for mineral wells

TS EN 13920-2 Aluminum and aluminum alloys - Scrap - Part 2: Non-alloy aluminum scrap

TS EN 10276-2 Determination of oxygen in steel and iron - Part 2: Infrared method after melting under inert gas 

TS EN 10297-1 Seamless round steel tubes -Technical delivery conditions section 1: Alloy and non-alloy steel pipes 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in zinc alloys - Spectrophotometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in zinc alloys - Spectrophotometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in primary zinc - Spectrophotometric method 

TS EN 14057 Lead and lead alloys - Scrap - Terms and recipes

TS EN ISO 14577-3 Metallic materials - Instrument trace test for hardness and material parameters - Part 3: Calibration of reference blocks 

TS EN 12258-3 Classification of aluminum and aluminum alloy scrap 

TS EN 13981-1 Aluminum and aluminum alloys - Products for structural railway applications; Inspection and delivery technical requirements - Part 1: Extrusion products 

TS EN ISO 15349-2 (Formerly: TS ISO 15349-2) Unalloyed steel - Low carbon content - Determination of carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (preheating) 

TSE ISO / TR 15349-3 Non-alloy steel-Low carbon-Determination of carbon content-Part 3: Infrared absorption method after burning in an electric resistant furnace (preheating) 

Zinc and zinc alloys - Chemical analyzes - Part 3177: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method 

Zinc and zinc alloys - Chemical analyzes - Part 3177: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method 

TS 5141 EN 12954 Cathodic protection - For embedded or submerged metallic structures - General principles and application for pipelines 

TS 602 EN ISO 439 (Formerly: TS 602 ISO 439) Steel and iron-Determination of total silicon content-Gravimetric method 

TS 2243 ISO 4941 Determination of steel and iron-Molybdenum content-Thiocyanate spectrophotometric method

TS EN 10222-4 / A1 Forged steels - for pressure purposes - Part 4: High yield strength weldable fine grain steels 

TS EN 13636 Cathodic construction of embedded metallic tanks and related piping system 

TS EN 14290 Zinc and zinc alloys - secondary raw materials

TS EN 10222-4 / A1 Forged steels - for pressure purposes - Part 4: High yield strength weldable fine grain steels

TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions 

TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions 

TS EN 10025-2 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels 

TS EN 10025-2 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels 

TS EN 10025-3 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels 

TS EN 10025-3 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels 

TS 3849 ISO 4969 Steel-strong macroscopic examination with mineral acids 

TS 3850 ISO 4968 Macrographic inspection with steel-sulfur pressure (baumann method)

TS 4245 ISO 4192 Aluminum and aluminum alloys-Determination of lead content-Flame atomic absorption spectrometric method 

TS ISO 15355 Determination of steel and iron-Chrome content-Indirect titration method 

TS EN ISO 8491 Metallic materials - Pipe (full cross section) - Bending test 

TS EN ISO 8493 Metallic materials - Pipe - Mouth expansion test (iso 8493: 1998) / note: To replace En 10234 (1993-10). 

TS EN 10025-5 Hot rolled structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance 

TS EN 10025-5 Hot rolled structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

TS ISO 10701 Determination of steel and iron-sulfur content-Methylene blue spectrophotometric method

TS ISO 10702 Determination of steel and iron-nitrogen content-Titrimetric method after distillation 

TS 680 ISO 671 Determination of sulfur content of steel and cast iron-Titrimetric method after combustion 

TS EN 10294-1 Hollow bars for machining - Technical delivery conditions - Part 1: Non-alloy and alloy steels

TS 5287-3 EN 10263-3 Steel rod, wire rod and wire for cold blow molding and cold extrusion-Part: 3: Technical delivery conditions for case-hardening steels 

TS 5287-3 EN 10263-3 Steel rod, wire rod and wire for cold blow molding and cold extrusion-Part: 3: Technical delivery conditions for case-hardening steels 

TS 5287-5 EN 10263-5 Steel rod, wire rod and wire for cold blowing and cold extrusion - Part 5: Technical delivery conditions for stainless steels 

TS 5287-5 EN 10263-5 Steel rod, wire rod and wire for cold blowing and cold extrusion - Part 5: Technical delivery conditions for stainless steels 

TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster 

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster 

TS EN 10160 Ultrasonic testing of flat steel products with a thickness equal to or more than 6 mm (reflection technique) 

TS EN 10160 Ultrasonic testing of flat steel products with a thickness equal to or more than 6 mm (reflection technique) 

TS EN 10034 Structural steel and h profiles - shape and dimension tolerances 

TS EN 10207 Steels for pressure vessels; Technical distribution requirements of plates, strips and bars 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in primary zinc - Spectrophotometric method 

TS EN 12441-6 Zinc and zinc alloys - Chemical analysis department 6 - Determination of aluminum and iron - Flame atomic absorption spectrophotometric method 

TS EN 12441-6 Zinc and zinc alloys - Chemical analysis department 6 - Determination of aluminum and iron - Flame atomic absorption spectrophotometric method 

tst EN 10080 (Priority 1) Concrete steel bars   

tst EN 10080 (Priority 1) Concrete steel bars   

tst EN 10080 (Priority 1) Concrete steel bars   

TS EN 12385-5 / AC Steel wire ropes - Safety - Part 5: Ropes for elevators 

TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions 

TS EN 10025-1 Hot-rolled structural steels - Part 1: General technical delivery conditions 

TS EN 10140 Cold rolled narrow steel strip - Dimensions and shape tolerances 

TS EN 10210-1 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 1: Technical delivery conditions 

TS EN 10210-2 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and cross-sectional properties "

TS EN 10219-2 "Steel tubes - welded, cold-formed from non-alloy fine grain steels - Part 2: Tolerances, dimensions and cross-sectional properties"

TS EN 10058 Hot rolled flat steel bars for general use - Dimensions, shape and dimension tolerances

Metallic powders - Determination of oxygen content by reduction method Part 4491: Hydrogen reducible oxygen TS ISO 3-1 / T4491 (Number modification: TS EN ISO 3-3) 

TS EN 10184 Chemical analysis of ferrous materials Determination of phosphorus in steels and iron-Spectrophotometric method

TS EN 14939 copper and copper alloys - Determination of beryllium content - Faas method

TS EN 61788-6 Superconductivity - Part 6: Measurement of mechanical properties - Tensile test of Cu / Nb-Ti compound superconductors at room temperature 

TS EN 10219-2 Structural steel pipes - Welded, unalloyed, welded cold-formed from fine grain steels - Part 2: Tolerances, dimensions and cross-sectional properties

TS EN 15034 Heating boilers condensing heating boilers for fuel oill 

TS EN 13920-3 Aluminum and aluminum alloys - Scrap - Part 3: Wire and cable scrap 

TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap 

TS EN 13920-5 Aluminum and aluminum alloys - Scrap - Part 5: Two or more types of alloy scrap of the same series 

TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap 

TS EN 13920-7 Aluminum and aluminum alloys - Scrap - Part 7: Cast iron scrap 

TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap 

TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap 

TS EN 13920-10 Aluminum and aluminum alloys - Scrap - Part 10: Aluminum cans of waste beverage 

TS EN 13920-11 Aluminum and aluminum alloys - Scrap - Part 11: Aluminum-copper radiator scrap 

TS EN 13920-12 Aluminum and aluminum alloys - Scrap - Part 12: Single alloy scrap shavings 

TS EN 13920-13 Aluminum and aluminum alloys - Scrap - Part 13: Two or more alloy scrap shavings 

TS EN 13920-14 Aluminum and aluminum alloys - Scrap - Part 14: Aluminum packaging scrap 

TS EN 13920-15 Aluminum and aluminum alloys - Scrap - Part 15: Aluminum packaging scrap from the coating 

TS EN 13920-16 Aluminum and aluminum alloys - Scrap - Part 16: Scrap grade slag, dros and debris 

TS EN 10204 Metallic products - Types of inspection and test documents 

TS EN 10204 Metallic products - Types of inspection and test documents

TS EN ISO 6507-4 Metallic materials - Vickers hardness test - Part 4: Charts and hardness values 

TS EN 541 Aluminum and aluminum alloys - Rolled products for boxes, lids - Specification 

TS EN 546-2 Aluminum and aluminum alloys-Foil-Part 2: Mechanical properties 

TS EN 15033 Wall-mounted water heaters for storage of hot water using lpg for vehicles and ships (storage water heaters) " 

TS EN 10163-1 / AC Surface delivery conditions of flat steel sheets, wide flats and profiles section 1: General specifications 

TS EN 10163-1 / AC Surface delivery conditions of flat steel sheets, wide flats and profiles section 1: General specifications 

TS EN 3999 Aviation series - Aluminum alloy al-P2024-T351 - Sheet and strip with improved chemical resistance, thickness 1,6 mm? a? 6 is mm 

TS EN 4002 Aviation series - Aluminum alloy al-P2219-T81 - Sheet and strip, thickness 0,5 mm? a? 6 is mm 

TS EN 3997 Aviation series - Aluminum alloy al-P2024-T3 - Sheet and strip of thickness 0,4 mm to 6 mm 

TS EN 4001 Aviation series - Aluminum alloy al-P2024-T351 - Improved chemically coated sheet and strip - Thickness 1,6 mm to 6 mm

TS EN 573-5 Aluminum and aluminum alloys - Chemical composition and shape of formable products - Part 5: Coding of shaped products 

TS EN 573-5 Aluminum and aluminum alloys - Chemical composition and shape of formable products - Part 5: Coding of shaped products 

TS EN ISO 3954 Powders for metallurgical purposes Sampling

TS EN 10217-1 / A1 Steel tubes - Welded - For pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties 

TS EN 541 Aluminum and aluminum alloys - Rolled products for boxes, lids and rings - Specifications 

TS EN 546-2 Aluminum and aluminum alloys - Foil - part 2: Mechanical properties 

TS EN ISO 6507-4 Metallic materials - Vickers hardness test - Part 4: Hardness value charts

TS EN ISO 7539-6 Corrosion of metals and alloys - Stress corrosion tests - Part 6: Preparation and use of pre-cracked samples for tests under constant force and constant displacement

TS EN 10028-1 + A1 Flat products in steel - for pressure purposes - part 1: General specifications 

TS EN 10028-1 + A1 Flat products in steel - for pressure purposes - part 1: General specifications

TS EN ISO 10062 Corrosion tests - Artificial atmosphere containing very low concentrations of pollutant gas (s) 

TS EN 10084 Carburizing steels - Technical delivery conditions

TS EN 10217-2 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties 

TS EN 10217-1 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

TS EN 12385-5 / AC Steel wire ropes - Safety - Part 5: Ropes for elevators

TS EN ISO 16784-2 Corrosion of metals and alloys - Corrosion and deterioration in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programs using a pilot-scale evaluation instrument

TS EN ISO 3927 Metallic powders - Excluding hardmetal powders - Determination of compressibility under uniaxial pressure

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes 

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes 

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes 

TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for strip and strip of structural corrosion resistant steels 

TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for strip and strip of structural corrosion resistant steels 

TS EN 10028-1 + A1 Flat steel products for pressure purposes - Part 1: General specifications 

TS EN 10028-1 + A1 Flat steel products for pressure purposes - Part 1: General specifications

TS EN 1780-3 Aluminum and aluminum alloys - Brief representation of alloyed aluminum ingots for remelting, pre-alloys and castings - Part 3: Writing rules for chemical composition 

TS EN 10238 Steel products automatically cleaned with sand and automatically pre-primed

TS EN 723 Copper and copper alloys - Determination of carbon on the inner surface of pipe or pipe fittings by combustion method 

TS EN 14057 Lead and lead alloys - Scrap - Terms and recipes 

TS EN 14938-2 Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (faas) 

TS EN 10283 Corrosion-resistant steel castings 

TS EN 10283 Corrosion-resistant steel castings

TS EN 10021 Technical delivery conditions for steel products 

tst EN 10168 Steel products - Inspection document - Information and identification list  

tst EN 10168 Steel products - Inspection document - Information and identification list   

TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings 

TS EN ISO 9444-2 Continuous hot-rolled stainless steel-Size and shape tolerances-Section 2: Wide strip and sheet / sheet

TS EN ISO 9444-2 Continuous hot-rolled stainless steel-Size and shape tolerances-Section 2: Wide strip and sheet / sheet 

TS EN ISO 11130 Corrosion of metals and alloys-Dip immersion test in salt solution 

TS EN ISO 18286 Hot-rolled steel sheets - tolerances for dimensions and shapes 

TS EN ISO 8993 Anodic oxidation of aluminum and aluminum alloys (anodizing coating) - Classification systems for the assessment of hollow corrosion - Graphical method 

TS EN ISO 11876 Hard metals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powder - Flame atomic absorption spectrometric method 

TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for structural corrosion-resistant steel strip / strip 

TS EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for structural corrosion-resistant steel strip / strip 

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes

TS EN 12385-1 + A1 Steel wire ropes - Safety - Part 1: General requirements 

TS EN ISO 4499-1 Hard metals - Metallographic determination of microstructure - Part 1: Photomicrograph and description 

TS EN ISO 4499-1 Hard metals - Metallographic determination of microstructure - Part 1: Photomicrograph and description 

TS EN ISO 3369 Impermeable sintered metal materials and hard metals - Determination of density 

TS EN ISO 3369 Impermeable sintered metal materials and hard metals - Determination of density

TS EN 10219-1 Steel tubes - Cold welded section of welded, non-alloy fine grain steels 1: Technical delivery conditions 

TS EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications 

TS EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welding) steel pipes for verification of hydraulic tightness 

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welding) steel pipes for verification of hydraulic tightness 

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Automatic eddy current testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of defects 

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Automatic eddy current testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of defects 

TS EN ISO 15630-3 Steel - For reinforced concrete and prestressed concrete - Test methods - Part 3: Prestressing steel 

TS EN ISO 15630-1 Steel - For reinforced concrete and prestressed concrete - Test methods - Part 1: Reinforcing rods, rope and wire

TS EN 10058 / T1 Hot rolled flat steel bars for general use - Dimensions, shape and dimension tolerances

TS EN 1560: 2011 Castings - Short designation for cast irons - Material symbols and material numbers 

TS EN ISO 3953 Metal powders - Determination of sedimentation density 

TS EN 12513 Castings - Wear-resistant cast iron 

TS EN 10277-5 Bright steel products - Technical delivery conditions - Part 5: For quenching and tempering (steel for reclamation) 

TS EN 12020-1 Aluminum and aluminum alloys-Precision profiles made by extrusion of en aw-6060 and en aw 6063 alloys - Part 1: Technical inspection and delivery conditions

TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings 

TS EN ISO 6892-2Metal materials - Tensile test - part 2: High temperature test method 

TS EN 1965-2 Structural adhesives -Corrosion section 2: Determination and classification of corrosion in brass floor material 

TS EN ISO 376 Metallic materials - Calibration of force measuring devices for the verification of single-axis test machines

TS EN ISO 8565 Metals and alloys - Atmospheric corrosion tests - General specifications for field tests 

TS EN ISO 16120-1 Non-alloy steel - Rod - For wire conversion - Part 1: General specifications

TS EN ISO 16120-3 Non-alloy steel - Bar - for wire conversion - Part 3: Particularly suitable for low carbon steel bars of boiling and semi-boiling castings

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes 

TS EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for rods, wire rods, wires, profiles and bright products of corrosion resistant steels for structural purposes

TS EN 10029 Hot-rolled 3 steel sheets of mm or thicker - Dimension and shape tolerances

TS EN 14677 Safety in machinery - Secondary steel fabrication - Machinery and installations for processing liquid steel 

TS EN 15094 Safety in machines - Safety requirements for cold flat rolled shafts

TS EN 12385-4 + A1 Steel wire ropes - Safety - Part 4: Bundle ropes for general lifting applications 

TS EN 12385-10 + A1 Steel wire ropes - Safety - Part 10: Spiral ropes used as general structural elements 

Steel wire ropes - Safety - Section 12385: Operation and maintenance information 

TS EN 12385-2 + A1 Steel wire ropes - Safety - Part 2: Definitions, designation and classification 

TS EN 10058 / T1 Hot rolled flat steel bars for general use - Dimensions, shape and dimension tolerances

TS EN 1560: 2011 Castings - Short designation for cast irons - Material symbols and material numbers 

TS EN ISO 3953 Metal powders - Determination of sedimentation density 

TS EN 12513 Castings - Wear-resistant cast iron 

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welding) steel pipes for verification of hydraulic tightness 

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welding) steel pipes for verification of hydraulic tightness 

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Automatic eddy current testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of defects 

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Automatic eddy current testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of defects 

TS EN ISO 10893-6 Non-destructive testing of steel tubes - Part 6: Radiographic examination of weld seam in welded steel tubes for the detection of defects 

TS EN ISO 10893-6 Non-destructive testing of steel tubes - Part 6: Radiographic examination of weld seam in welded steel tubes for the detection of defects 

TS EN ISO 10893-7 Non-destructive testing of steel pipes - Part 7: Digital radiographic examination of weld seam in welded steel pipes for the detection of defects 

TS EN ISO 10893-7 Non-destructive testing of steel pipes - Part 7: Digital radiographic examination of weld seam in welded steel pipes for the detection of defects 

TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects 

TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects 

TS EN ISO 10893-10 Non-destructive testing of steel pipes - Part 10: Automatic full environmental ultrasonic testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of longitudinal and / or transverse defects 

TS EN ISO 10893-10 Non-destructive testing of steel pipes - Part 10: Automatic full environmental ultrasonic testing of seamless and welded (excluding submerged arc welding) steel pipes for the detection of longitudinal and / or transverse defects 

TS EN ISO 10893-11 Non-destructive testing of steel pipes - Part 11: Automatic ultrasonic testing of weld seam in welded steel pipes for the detection of transverse and / or longitudinal defects 

TS EN ISO 10893-11 Non-destructive testing of steel pipes - Part 11: Automatic ultrasonic testing of weld seam in welded steel pipes for the detection of transverse and / or longitudinal defects 

TS EN ISO 15630-1 Steel - for reinforced concrete and prestressed concrete - Test methods - part 1: Reinforcing rods, rope and wire 

TS EN 10244-2 Steel wire and wire products - Non-ferrous metal coatings on steel wire - Part 2: Zinc or zinc alloy coatings 

TS EN ISO 6892-2 Metal materials - Tensile test - part 2: High temperature test method 

TS EN 1965-2 Structural adhesives -Corrosion section 2: Determination and classification of corrosion in brass floor material 

TS EN ISO 11961 Oil and gas industry - Steel drilling pipes 

TS EN 13283 Zinc and zinc alloys - Secondary zinc

TS EN ISO 376 Metallic materials - Calibration of force measuring devices for the verification of single-axis test machines

TS EN ISO 8565 Metals and alloys - Atmospheric corrosion tests - General specifications for field tests 

TS EN ISO 16120-1 Non-alloy steel - Rod - For wire conversion - Part 1: General specifications

TS EN ISO 16120-3 Non-alloy steel - Rod - For wire conversion - Part 3: Specific requirements for low carbon steel bars of boiling and semi-boiling cast 

TS EN ISO 16120-4 Non-alloy steel for bar-to-wire conversion Part 4: Specific requirements for special applications

TS EN ISO 15546 Oil and gas industries - Aluminum alloy drill pipe 

TS EN 10245-4 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire 

TS EN 1559-3 Castings - Technical delivery conditions - Part 3: Additional requirements for ferrous castings 

TS EN 1561 Castings-Gray (lamella graphite) cast irons 

TS EN 1561 Castings-Gray (lamella graphite) cast irons 

TS EN 10245-1 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules 

TS EN 10245-2 Steel wire and wire products-Organic coatings on steel wire-Part 2: PVC coated wire 

TS EN 10245-3 Steel wire and wire products - Organic coatings on steel wire - Part 3: Pe coated wire 

TS EN 10245-5 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire 

TS EN 10257-1 Steel wires - Unalloyed steel - Zinc or zinc alloy coated - Part used for the manufacture of armored energy or telecommunication cables 1: Field cables 

TS EN 10257-2 Steel wires - Non-alloy steel - Zinc or zinc alloy coated - Used in the manufacture of armored electrical or telecommunication cables - Part 2: Submarine cables 

TS EN 10270-1 Steel wires for mechanical springs - Part 1: Patent annealed, cold drawn, non-alloy steel spring wire 

TS EN 10270-1 Steel wires for mechanical springs - Part 1: Patent annealed, cold drawn, non-alloy steel spring wire 

TS EN 10270-2 Steel wires for mechanical springs - Part 2: Oil-hardened and tempered steel spring wire 

TS EN 10270-2 Steel wires for mechanical springs - Part 2: Oil-hardened and tempered steel spring wire 

TS EN 10270-3 Steel wires for mechanical springs - Part 3: Stainless steel spring wire 

TS EN 10270-3 Steel wires for mechanical springs - Part 3: Stainless steel spring wire 

TS EN ISO 26203-2 Metallic materials - Tensile test at high tensile speeds - Part 2: Servehydraulics and other test systems 

TS 491 EN 610 / T2 Tin and tin alloys - Ingot tin 

TS EN 10218-1 Steel wire and wire products - General 1: Test methods 

TS EN 10264-2 Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non-alloy steel wire for general purpose ropes 

TS EN 10264-1 Steel wire and wire products - Steel wire for ropes - Part 1: General specifications 

TS EN ISO 9223 Corrosion of metals and alloys-Corrosion properties of atmospheres-Classification 

TS EN ISO 9224 Corrosion of metals and alloys - Corrosion of atmospheres - Guide values ​​for corrosive atmosphere categories 

TS EN ISO 9225 Corrosion of metals and alloys - Corrosion of atmospheres - Measurement of pollution 

TS EN ISO 9226 Corrosion of metals and alloys - Corrosion of atmosphere - Determination of corrosion rate of standard samples to evaluate corrosion

TS EN 15949 Safety machine - Safety requirements for bar mills, structural steel mills and wire rod mills 

TS EN 10294-2 Hollow bars for machining - Technical delivery conditions - Part 1: Non-alloy and alloy steels 

TS EN 1563: 2011 (EN) Castings - Spheroidal graphite cast iron 

TS EN 10218-2 Steel wire and wire products-General-Section 2: Wire dimensions and tolerances 

TS EN 10264-3 Steel wire and wire products - Steel wire for ropes - Part 3: Round and other non-alloy steel wire - For heavy duty applications 

TS EN 16124 Castings - Low alloyed ferritic spheroidal graphite cast iron for high temperature applications 

TS EN 13835: 2012 Castings - Austenitic cast irons 

TS EN 16079 Castings - Compact graphite cast iron 

TS EN 16079 Castings - Compact graphite cast iron 

TS EN 16090: 2011 Copper and copper alloys - Estimation of average particle size by ultrasound 

TS EN 1971-2 Copper and copper alloys - Eddy current inspection for the measurement of defects in seamless round copper and copper alloy pipes - Part 2: Internal probe method on the inner surface 

TS EN 1172 Copper and copper alloys - Sheets and strips - Used in buildings 

TS EN 15022-4 Copper and copper alloys-Determination of tin content-Part 4: Medium tin content-Flame atomic absorption method (faas) 

TS EN 10264-4 Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire 

TS EN 1562 Castings, tempered cast iron (malleable) 

TS EN 1562 Castings, tempered cast iron (malleable)

TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions

TS EN 10025-6 + A1 Hot rolled structural steels - Part 6: Technical delivery conditions for flat products made of high yield strength structural steels in quenched and tempered condition 

TS EN 10025-6 + A1 Hot rolled structural steels - Part 6: Technical delivery conditions for flat products made of high yield strength structural steels in quenched and tempered condition 

TS EN 1564 Castings - Austempered ductile cast iron 

TS EN 1971-1: 2011 (EN) Copper and copper alloys - Eddy current inspection for the measurement of defects in seamless round copper and copper alloy tubes - Part 1: Internal test roll method on the outer surface 

TS EN 1371-1 Casting-Liquid penetrant inspection-Part 1: Sand, non-pressure and low pressure die casting 

TS EN 1371-1 Casting-Liquid penetrant inspection-Part 1: Sand, non-pressure and low pressure die casting 

tst EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications   

tst EN 10028-1 + A1 / AC Flat steel products for pressure purposes - Part 1: General specifications

TS ISO 2393 Rubber test mixtures - Preparation, mixing and solidification - Materials and methods 

TS EN 12680-3 Casting - Ultrasonic inspection - Part 3: Spheroidal graphite cast iron

TS EN ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests 

TS EN 12451 Copper and copper alloys - Seamless round tubes for heat exchangers 

TS EN 12452: 2012 Copper and copper alloys - Seamless tubes with extruded ducts for heat exchangers 

TS EN 10025-6: 2004 + A1 Hot-rolled structural steels - Part 6: Technical delivery conditions for flat products made of quenched and tempered high yield strength structural steels 

TS EN 10163-2 Flat steel products - Delivery conditions for hot rolled sheets, wide flats and profiles - Part 2: Plates and wide flats 

TS EN 10163-3 Flat steel products - Delivery conditions for hot rolled sheets, wide flats and profiles section 3: Profiles 

TS EN 10164 Steel products with improved deformation perpendicular to the product surface - Technical delivery conditions 

TS EN 1370 Casting-surface roughness inspection with comparator 

TS EN ISO 7539-6 Corrosion of metals and alloys - Tensile corrosion tests - Part 6: Preparation and use of pre-cracked samples 

TS EN 486 Aluminum and aluminum alloys extrusion billets 

TS EN ISO 15630-2 Steel - For reinforced concrete and prestressed concrete - Test methods - Part 2: Welded mesh steels 

TS EN ISO 15630-3 Steel - For reinforced concrete and prestressed concrete - Test methods - part 3: Prestressing steel 

TS EN 2242 Aviation series - Crimping of conductive electrical cables defined in EN 2083, EN 4434 and EN 2346 

TS EN 10111 Continuous hot rolled, low carbon steel sheet and strip for cold forming - Technical delivery conditions 

TS EN ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests 

TS EN 16117-1 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with a copper content of less than 99,85%

TS EN 10200 Chemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometric method 

TS EN 10270-1 Steel wires - for mechanical springs - Part 1: Patent annealed, cold-drawn, non-alloy spring steel wire 

TS EN 10253-3 Butt welded pipe fittings - Part 3: Formable austenitic and austenitic-ferritic (duplex) stainless steels without special inspection 

TS ISO 1178 Magnesium and magnesium alloys - Chemical analysis - Determination of soluble zirconium (alizarin sulfonate photometric method) 

TS EN 12914 Chemicals for the treatment of potable and domestic water - Finely ground (powder) perlite 

TS EN 1976 Copper and copper alloys - Non-deformable copper casting products 

TS EN 10071 Chemical analysis methods of iron-based materials-Determination of manganese in steel and iron-electrometric titration method 

TS EN 10200 Chemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometric method 

TS EN 16222 Cathodic protection of ship hulls 

TS EN 10163-1 Surface delivery conditions for hot rolled steel sheets, wide flats and profiles - Part 1: General Specifications 

TS EN 10163-1 Surface delivery conditions for hot rolled steel sheets, wide flats and profiles - Part 1: General Specifications 

TS EN 15088 Aluminum and aluminum alloys - Structural products for construction works - Technical requirements for inspection and delivery 

TS EN ISO 1141 Ropes - Polyester - 3-, 4-, 8- and 12- sleeves 

TS EN 10244-1 / AC Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles 

TS EN ISO 13174 Cathodic protection for port facilities 

TS EN ISO 2739: 2012 Sintered metal bushings - Determination of radial crush strength 

TS EN ISO 2739: 2012 Sintered metal bushings - Determination of radial crush strength 

TS EN ISO 7625 Sintered metal materials other than hard metals - Sample preparation for chemical analysis - Preparation of samples for chemical analysis of carbon content determination 

TS EN 10223-1 Steel wires and wire products - Section for fences 1: Barbed steel wire coated with zinc and zinc alloy 

TS EN 10223-2: 2012 Steel wires and wire products - for fences - Part 2: Hexagonal steel wire fences - for agricultural, separating and fencing purposes 

TS EN 10223-4: 2012 Steel wire and wire products - for fences - Part 4: Welded wire mesh fences 

TS EN 10223-5: 2012 Steel wire and wire products-Fence purpose-Section 5: Articulated and knotted steel wire fence 

TS EN 10223-5: 2012 Steel wire and wire products-Fence purpose-Section 6: Simple twisted steel wire fence  

TS EN 10223-6: 2012 Steel wire and wire products - Fence purpose - Part 6: Simple twisted steel wire fence 

TS EN 10223-7 Steel wire and wire products - For wire fences - Part 7: Welded panels made of steel wire for fences 

TS EN 12450: 2012 Copper and copper alloys - Seamless round capillary copper tubes 

TS EN 15616: 2012 Copper alloys-Cadmium determination-Flame atomic absorption spectrophotometric method 

TS EN 16117-2: 2012 Copper and copper alloys-Determination of copper content-Part 2: Determination of copper by electrolytic method in materials with a copper content higher than 99,80% 

TS EN ISO 5755: 2012 Sintered metal material-Specifications 

TS EN ISO 643: 2012 Steels - Micrograph determination of apparent grain size 

TS EN ISO 7539-1: 2012 Corrosion of metals and alloys - Tensile corrosion tests - Part 1: General test procedures guide 

TS EN ISO 9513 Metal materials - Calibration of extensometers used in uniaxial tests 

TS EN 1977: 2013 Copper and copper alloys - Copper wire rods

TS EN 16299 Cathodic protection of external surfaces on soil storage tank based on contact with soil or base

TS EN ISO 4492: 2013Metalic powders - Excluding powders for hard metals - Determination of dimensional changes for compaction and sintering 

TS EN 502 Roofing sheets - Metal - Fully fitted - Stainless steel sheet - 

TS EN ISO 3183: 2012 Oil and gas industries - Steel pipes for pipeline transport systems 

TS EN 3998 Aviation series - Aluminum alloy AL-P2024-T4 or T42 - Sheet and strip of thickness 0,3 mm to 6 mm 

TS EN 1503-3 Valves - Materials for housings, covers and housings - Part 3: Cast iron bars specified in European standards 

TS EN 10214 Steel tape and sheet-Continuous hot-dip zinc-Aluminum (za) coated-Technical delivery conditions   

TS EN 573-3 Aluminum and aluminum alloys - Chemical composition and shape of formable products - Part 3: Chemical composition 

TS EN 573-3 Aluminum and aluminum alloys - Chemical composition and shape of formable products - Part 3: Chemical composition 

TS EN 1090-3 Steel and aluminum construction applications - Part 3 - Technical requirements for aluminum structures 

tst EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms

TS EN 10223-1 Steel wires and wire products - for fences - Part 1: Barbed steel wire coated with zinc and zinc alloy

TS EN ISO 4491-4 Metal powders-Determination of oxygen by reduction method-Part 4: Determination of total oxygen by reduction-extraction 

TS EN ISO 13517 Metallic powders - Determination of flow rate with calibrated funnel (Gustavsson flovmeter) 

TS EN 14584 Non-destructive testing - Acoustic emission - Inspection of pressurized metal equipment during verification tests - Planar placement of Ae welds 

TS EN 10209 Cold rolled low carbon flat steel products for vitreous enamel - Technical delivery conditions 

TS EN 12496: 2013 Galvanic anodes for cathodic protection in seawater and brine 

TS EN 13600: 2013 Copper and copper alloys - copper tubes - seamless - for electrical purposes 

TS EN 13601 Copper and copper alloys - copper rod, strand rod and wire - for general electrical purposes 

TS EN 13602: 2013 Copper and copper alloys - Extruded round copper wire - For the manufacture of electrical conductors 

TS EN 13603: 2013 Copper and copper alloys - Test methods for the evaluation of protective tin coatings on electrically drawn round copper wires 

TS EN 13604 Copper and copper alloys - Semiconductor devices of high conductive copper, electronic and vacuum products 

TS EN 13605: 2013 Copper and copper alloys - Copper profiles and profiled wire - For electrical purposes 

TS EN ISO 377: 2013 Steel and steel products - Collection and preparation of samples and test pieces for mechanical tests

TS EN ISO 3326: 2013 Hardmetals - Determination of magnetization (coercivity) 

TS EN ISO 3326: 2013 Hardmetals - Determination of magnetization (coercivity)

TS EN 13636 Cathodic protection of buried metallic tanks and associated piping system 

TS EN 10209 Cold rolled low carbon flat steel products - For vitreous enamel - Technical delivery conditions 

TS EN 13601 Copper and copper alloys - Copper rod, rectangular rod and wire - For general electrical purposes 

TS EN 13602 Copper and copper alloys - Drawn round copper wire - For the manufacture of electrical conductors 

TS EN ISO 20482 Metallic materials - Sheet and strip - Erichsen buckling test 

TS 491 EN 610 Tin and tin alloys- ingot tin 

TS EN 10149-2 Flat steel products - Cold forming - Hot rolled - High yield strength steels section 2: Technical delivery conditions for thermomechanically rolled products

TS 8311 EN 25580 Non-destructive testing-Industrial radiographic illuminators-Minimum requirements 

TS EN 10355 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloy steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn following dissolution by nitric acid and sulfuric acid [Routine method ] 

TS EN 10149-1 Flat steel products - Hot rolled for cold forming - High yield steels section 1: General technical delivery conditions 

TS EN 10149-3 Flat steel products - Hot rolled for cold forming - High yield strength steels section 3: Technical delivery conditions for normalized or rolled normalized products 

TS EN 4004 Aviation series - Aluminum alloy al-P3103-H16 - Sheet and strip with thickness from 0,4 mm to 6 mm 

TS EN 15280 Assessment of the possibility of AC corrosion of buried pipelines applicable to cathodic protected pipelines 

TS EN 10268 + A1 High yield cold rolled steel flat products for cold forming - Technical delivery conditions

TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties 

TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties 

TS EN 13195 Aluminum and aluminum alloys - Formable and documentable products for marine applications (shipbuilding, offshore and offshore) 

TS EN ISO 18265 Metal materials - Cycle of hardness values 

TS EN ISO 8492 Metal materials - Pipe - Flattening test 

TS EN ISO 8494 Metal materials - Pipe - Flange test 

TS EN ISO 8495 Metal materials - Tubing - Ring expansion test 

TS EN ISO 8496 Metal materials - Tubing - Ring tensile test 

TS EN 10211 Chemical analysis of ferrous materials - Determination of titanium in steel and cast iron - Flame atomic absorption spectrometric method 

TS EN ISO 5579 Non-destructive testing - Radiographic examination of metallic materials by film and X-ray or gamma rays - General rules 

TS EN 10216-1 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties 

TS EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified high temperature properties 

TS EN 10216-3 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes 

TS EN 10216-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

TS EN 10216-5 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes 

TS EN 10223-3 Steel wires and wire products for fences - Part 3: Hexagonal steel wire mesh for civil engineering purposes 

TS EN 10223-8 Steel wires and wire products for fences - Part 8: Welded mesh gabion products

TS EN 15112 External Cathodic Protection in Drilling Casing Pipes 

TS EN ISO 10893-4 Non-destructive testing of steel pipes - Part 4: Liquid penetrant inspection of seamless and welded steel pipes for the detection of surface defects 

TS EN ISO 10893-4 Non-destructive testing of steel pipes - Part 4: Liquid penetrant inspection of seamless and welded steel pipes for the detection of surface defects 

TS EN ISO 3183 Oil and gas industries - steel pipes for pipeline transport systems 

TS EN 1370 Casting - Investigation of surface condition 

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welded) steel pipes for verification of hydraulic sealing (ISO 10893-1: 2011) 

TS EN ISO 10893-1 Non-destructive testing of steel pipes - Part 1: Automatic electromagnetic examination of seamless and welded (excluding submerged arc welded) steel pipes for verification of hydraulic sealing (ISO 10893-1: 2011) 

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Inspection of seamless and welded (excluding submerged arc-welded) steel pipes with automatic eddy currents for the detection of defects (ISO 10893-2: 2011) 

TS EN ISO 10893-2 Non-destructive testing of steel pipes - Part 2: Inspection of seamless and welded (excluding submerged arc-welded) steel pipes with automatic eddy currents for the detection of defects (ISO 10893-2: 2011) 

TS EN 573-3 Aluminum and aluminum alloys - Chemical composition and form of forging products - Part 3: Chemical composition and form of products 

TS EN 573-3 Aluminum and aluminum alloys - Chemical composition and form of forging products - Part 3: Chemical composition and form of products

TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects 

TS EN ISO 10893-8 Non-destructive testing of steel pipes - Part 8: Automatic ultrasonic testing of seamless and welded steel pipes for the detection of planar defects

TS EN 14681 + A1 Safety in machinery - Safety requirements for machinery and equipment for steelmaking in electric arc furnaces 

TS EN 13509 Cathodic protection measurement techniques 

TS EN 13981-3 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 3: Castings 

TS EN 13411-8 Terminators for steel wire ropes - Safety - Part 8: Forged connectors and die forging 

TS EN 10223-4 Steel wire and wire products for fences and nets - Part 4: Welded steel wire mesh fences 

TS EN 10223-6 Steel wire and wire products for fences and nets - Part 6: Simple twisted steel wire fence 

TS EN 1369 Castings-Magnetic particle inspection 

TS EN 61788-19 Superconductivity - Part 19: Measurement of mechanical properties - Room temperature tensile test of Nb3Sn composite superconductors reacting 

TS EN 13599 Copper and copper alloys - Copper sheets, sheets and strip - for electrical purposes 

TS EN 12473 Cathodic protection - In sea water - General principles 

TS EN ISO 8407 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens 

TS EN 10107 Flat steel products - Plates, tapes and strips of oriented grain electrical steel delivered in fully processed condition 

TS EN ISO 11474 Corrosion of metals and alloys - Corrosion tests in artificial atmospheres - Accelerated open-air test by intermittent salt spraying (shell test) 

TS EN ISO 13085 Oil and gas industries - Aluminum alloy pipes - For use in wells installations 

TS EN ISO 22068 Sintered metal injection molded materials - Specifications 

TS EN ISO 16841 Steel wire ropes - eyes for rope installation Tensile - Types and minimum requirements 

TS EN ISO 11960 Oil and gas industries - Casing and production pipes made of steel for boreholes 

TS EN 12258-1 Aluminum and aluminum alloys - Terms and definitions - Part 1: General terms 

TS EN ISO 9513 / AC Metal materials - Calibration of extensometers used in uniaxial tests - Teknik Korigendum 1

TS EN 13981-4 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 4: Forging 

TS EN ISO 27627 Oil and gas industries - Measurement of aluminum alloy drill pipe connection threads 

TS EN 851 Aluminum and aluminum alloys - Disc and disc draft for kitchen utensils 

TS EN 941 Aluminum and aluminum alloys - Disc and disc layout for general applications - Specification 

TS EN ISO 6509-1 Zinc copper alloys Determination of de-corrosion resistance - corrosion of metals and alloys - Part 1: Test method 

TS EN ISO 10113 Metallic materials - Determination of plastic strain rate of bands, sheets and strips 

TS EN ISO 10275 Metallic materials - Sheet and strip - Determination of tensile stress hardening coefficient 

TS EN 12420 Copper and copper alloys - Forging 

TS EN 16482 Castings - Continuous cast iron bars 

TS EN ISO 17081 Determination of hydrogen uptake and transport of metals by electrochemical technique and method of measurement of hydrogen permeability 

TS EN ISO 16808 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by blowing test with optical measuring systems 

TS EN ISO 4490 Metallic powders - Hall flowmeter measurement methods with calibrated funnel 

TS ISO 6279 Plain bearings - Aluminum alloys for solid bearings 

TS EN ISO 10893-11 Non-destructive testing of steel tubes - Part 11: Automatic ultrasonic inspection of welded seam in welded steel tubes for the detection of transverse and / or longitudinal defects (ISO 10893-11: 2011) 

TS EN ISO 10893-11 Non-destructive testing of steel tubes - Part 11: Automatic ultrasonic inspection of welded seam in welded steel tubes for the detection of transverse and / or longitudinal defects (ISO 10893-11: 2011) 

TS EN 10257-1 Steel wires - Unalloyed steel - Zinc or zinc alloy coated - Used in the manufacture of armored energy or telecommunications cables Part 1: Field cables 

TS EN ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method 

TS EN ISO 6506-2 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of test equipment 

TS EN ISO 6506-3 Metallic materials - Brinell hardness test - part 3: Calibration of reference blocks 

TS EN ISO 6506-4 Metallic materials - Brinell hardness test - part 4: Hardness value charts 

TS EN ISO 683-17 Heat treated steels - Alloy steels and automat steels - Part 17: for ball and cylindrical roller bearings 

TS EN ISO 683-17 Heat treated steels - Alloy steels and automat steels - Part 17: for ball and cylindrical roller bearings 

TS EN 1559-2 Castings - Technical delivery conditions - Part 2: Additional features for steel castings 

TS EN 10088-2 Stainless steels - Part 2: Technical delivery of sheet / plate and strip made of corrosion resistant steels for general purposes

TS EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet / plate and strip of corrosion resistant steels for general purposes 

TS EN 10088-1 Stainless steels - Part 1: List of stainless steels 

TS EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, rods, wire rods, wires, profiles and bright products of general-purpose corrosion-resistant steels 

TS EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, rods, wire rods, wires, profiles and bright products of general-purpose corrosion-resistant steels 

TS EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, rods, wire rods, wires, profiles and bright products of general-purpose corrosion-resistant steels 

TS EN 10217-7 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

TS EN 13411-4 Terminators for steel wire ropes - Safety - Part 4: Sockets with metal and resin 

TS EN 10223-3 Steel wires and wire products for fences - Part 3: Hexagonal steel wire mesh for civil engineering purposes 

TS EN 10169: 2010 + A1 Steel flat products continuously coated with organic material (roll coating) - Technical delivery conditions 

TS EN 10149-1 Flat steel products - Hot rolled for cold forming - High yield strength steels - Part 1: General technical delivery conditions 

TS EN 10149-2 Flat steel products - Cold forming - Hot rolled - High yield strength steels section 2: Technical delivery conditions for thermomechanically rolled products 

TS EN 10149-3 Flat steel products - Hot rolled for cold forming - High yield strength steels section 3: Technical delivery conditions for normalized or rolled normalized products 

TS EN 1371-1 Casting-Liquid penetrant inspection-Part 1: Sand, non-pressure and low pressure die casting 

TS EN 1371-1 Casting-Liquid penetrant inspection-Part 1: Sand, non-pressure and low pressure die casting 

TS EN 10216-1 Steel tubes for seamless pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties 

TS EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified high temperature properties 

TS EN 10216-3 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes Ü

TS EN 10216-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

TS EN 10216-5 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

TS EN 15280 Assessment of the possibility of AC corrosion of buried pipelines applicable to cathodic protected pipelines   

TS EN 851 Aluminum and aluminum alloys - Disc and disc draft for kitchen utensils   

tst EN 61788-19 Superconductivity - Part 19: Measurement of mechanical properties - Room temperature tensile test of Nb3Sn composite superconductors   

TS EN 10223-2 Steel wires and wire products - For fences and fences - Part 2: Hexagonal steel fences - Agricultural, separating and fencing purposes

TS EN 10223-7 Steel wire and wire products - For fences and fences - Part 7: Welded steel wire panels for fencing 

TS EN 10245-2 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC coated wire 

TS EN 10253-2 Steel pipe fittings - Butt welded - Part 2: Special inspection requirements for non-alloy and ferritic alloy steels-Dimensions, technical delivery conditions

TS EN 10268 + A1 High yield cold rolled steel flat products for cold forming - Technical delivery conditions   

TS EN 1386 Aluminum and aluminum alloys - Tooth plate - Specifications   

TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties 

TS EN 10269 Steels and nickel alloys for fasteners with high temperature and / or low temperature properties 

TS EN 12420 Copper and copper alloys - Forging 

TS EN 12473 Cathodic protection - In sea water - General principles 

TS EN 13599 Copper and copper alloys - Copper plate, sheet and strip - For electrical purposes 

TS EN ISO 11960 Oil and gas industries - Casing and production pipes made of steel for boreholes   

TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods 

TS EN 1559-1 Castings - Technical delivery conditions - Part 1: General 

TS EN 10293 Steel castings for general engineering uses 

TS EN 1371-2 Castings-Liquid penetrant inspection-Part 2: Precision castings 

TS EN 1371-2 Castings-Liquid penetrant inspection-Part 2: Precision castings 

TS EN ISO 7441 Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor corrosion tests 

TS EN ISO 7539-10 Corrosion of metals and alloys - Tensile corrosion test - Part 10: Inverse U-bending method 

TS EN ISO 7539-11 Corrosion of metals and alloys - Tensile corrosion test - Part 11: Principles of hydrogen brittleness of metals and alloys and crack resistance test due to hydrogen 

TS EN 15063-1 Copper and copper alloys - Determination of principal components and impurities by wavelength-separated x-ray fluorescence spectrometry - Part 1: Guide for routine method 

TS EN 15063-1 Copper and copper alloys - Determination of principal components and impurities by wavelength-separated x-ray fluorescence spectrometry - Part 1: Guide for routine method 

TS EN 15703-2 Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometry method (AAAS)

TS EN 15703-2 Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometry method (AAAS)

TS EN 10107 Flat steel products - Plates, tapes and strips of oriented grain electrical steel delivered in fully processed condition 

TS EN 10211 Chemical analysis of ferrous materials - Determination of titanium in steel and cast iron - Flame atomic absorption spectrometric method 

TS EN 941 Aluminum and aluminum alloys - Disc and disc layout for general applications - Specification 

TS EN ISO 8492 Metal materials - Pipe - Flattening test 

TS EN ISO 8494 Metal materials - Pipe - Flange test 

TS EN ISO 8495 Metal materials - Tubing - Ring expansion test 

TS EN ISO 18265 Metal materials - Cycle of hardness values 

tst EN ISO 8492 Metal materials - Pipe - Flattening test   

tst EN 10120 Steel plates and strips for welded gas cylinders   

TS EN 1971-1 Copper and copper alloys - Eddy current inspection for the measurement of defects in seamless round copper and copper alloy tubes - Part 1: Test on the outer surface with a surrounding coil 

TS EN 1971-2 Copper and copper alloys - Eddy current inspection for the measurement of defects in seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface 

TS EN ISO 10893-6 Non-destructive testing of steel tubes - Part 6: Radiographic examination of weld seam in welded steel tubes for the detection of defects 

TS EN ISO 10893-6 Non-destructive testing of steel tubes - Part 6: Radiographic examination of weld seam in welded steel tubes for the detection of defects 

Zinc and zinc alloys - Characteristics of rolled flat products used in buildings 

Zinc and zinc alloys - Characteristics of rolled flat products used in buildings

TS EN 14195 Metal frame components used in gypsum board systems - Definitions, requirements and test methods 

TS EN 10346 / D2 Flat rolled steel products continuously coated by hot-dip - Technical delivery conditions 

TS EN 10221 Classification of surface qualities of hot rolled bars - Technical delivery conditions 

TS EN 10221 Classification of surface qualities of hot rolled bars - Technical delivery conditions

TS EN 10113-1 Hot rolled products - Fine grain weldable structural steels - Part 1: General technical delivery conditions   

TS EN ISO 11474 Corrosion of metals and alloys - Corrosion tests in artificial atmospheres - Accelerated open-air test by intermittent salt spraying (shell test)   

TS EN ISO 8407 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens

TS EN 1559-4 Castings - Technical delivery conditions - Part 4: Additional features for aluminum alloy castings

TS EN ISO 6508-2 Metallic materials - Rockwell hardness test - part 2: Verification and calibration of test equipment and tips 

TS EN ISO 6508-3 Metallic materials- Rockwell hardness test- Part 3: Calibration of reference blocks

TS ISO 10384 Hot-rolled carbon steel sheets defined by their chemical composition 

TS ISO 11054 Cutting tools - Brief description of high speed steel assemblies 

TS ISO 9591 Corrosion of metals and alloys-Corrosion of aluminum alloys-Determination of resistance to stress corrosion crack 

TS ISO 7530-1 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 1: General rules and sample dissolution 

TS ISO 4999 Continuous hot-dip method coated with terne (lead alloy), cold rolled commercial, tensile and structural grade steel sheet 

TS ISO 14590 Cold rolled steel sheet - High tensile strength, low yield point, improved formability 

TS ISO 7800 Metallic materials - Wire - Simple torsion test 

TS ISO 1143 Metals- Rotating bar bending fatigue tests

TS EN 61788-21 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General specifications and guidance

TS EN 1396 Aluminum and aluminum alloys-Roll coated sheets and tape-General applications-Features

Metallic materials - Tensile test - Part 6892: Low temperature test method TS EN ISO 3-2015: 3 

TS EN 10027-2 Brief display systems for steels - Part 2: Numerical system

TS EN 15079 Copper and copper alloys - Analysis by spark-based optical emission spectrometer (S-OES) 

TS EN 15079 Copper and copper alloys - Analysis by spark-based optical emission spectrometer (S-OES) 

TS EN 10346 Flat rolled steel products continuously coated with hot-dip - Technical delivery conditions 

TS EN ISO 16701 Corrosion of metals and alloys - Corrosion in an artificial atmosphere - Accelerated corrosion test involving a controlled humidification period and exposure to intermittent salt solution spraying conditions 

TS EN 10359 Laser welded semi-finished products - Technical delivery conditions 

TS EN 10338 Hot and cold rolled uncoated products of multi-phase steels used in cold forming - Technical delivery conditions 

TS EN 10360 Hot, warm and cold forging - Repair conditions before shipment 

TS EN ISO 14577-1 Metallic materials - Instrument trace test for hardness and material parameters - Part 1: Test method 

TS EN ISO 14577-2 Metallic materials - Instrument trace test for hardness and material parameters - Part 2: Verification and calibration of test machines 

TS EN ISO 14577-3 Metallic materials - Instrument trace test for hardness and material parameters - Part 3: Calibration of reference blocks 

TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.   

TS EN 10025-2 / D1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels 

TS EN 10025-2 / D1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels 

TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements 

TS EN 14783 Sheet and strip - Metal - Fits on the surface - For use as roofing, siding and internal surface coating - Product specifications and requirements 

TS EN 10210-1 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 1: Technical delivery conditions   

TS EN 10029 Hot-rolled 3 steel sheets of mm or thicker - Dimension and shape tolerances 

TS EN 10210-2 Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and cross-sectional properties "

TS EN 10149-2 / D1 Flat steel products - Hot rolled for cold forming - High yield steels - Part 2: Technical delivery conditions for thermomechanically rolled products 

TS EN 10251 Magnetic materials - Determination of geometric properties of electrical plates and bands 

TS EN 10139 / D1 Steel strips - Cold rolled uncoated narrow - For soft and cold forming - Technical delivery conditions 

TS EN 10219-2 / D1 Structural steel tubes - Welded, unalloyed, welded cold-formed from fine grain steels - Part 2: Tolerances, dimensions and cross-sectional properties 

TS EN ISO 7438 Metallic materials - Bending test 

TS EN 16773 Aluminum and aluminum alloys - Guide for the production of foils in the field of semi-rigid food packaging 

TS EN 10139 Steel strips - Cold rolled uncoated narrow - For soft and cold forming - Technical delivery conditions 

TS EN ISO 15156-2 Oil and gas industries - Materials used in environments containing H2S in oil and gas production - Part 2: Use of crack-resistant carbon steel and low alloy steels and cast iron 

TS EN ISO 15156-3 Oil and gas industries - Materials used in environments containing H2S in oil and gas production - Part 3: Crack-resistant corrosion-resistant alloys and other alloys 

TS EN 10106 Flat rolled steel products - Cold rolled non-oriented grain electrical steel delivered in fully processed condition 

TS EN 10303 Magnetic thin steel plate and strip - For use in medium frequencies 

TS EN 10303 Magnetic thin steel plate and strip - For use in medium frequencies 

TS EN ISO 8044 Corrosion of metals and alloys - Basic terms and definitions 

TS EN ISO 14556 Steel - Charpy impact test of V notched specimen - Instrument test method 

TS EN ISO 16859-1 Metallic materials - Leeb hardness test - Part 1: Test method 

TS EN ISO 16859-2 Metallic materials - Leeb hardness test - Part 2: Calibration and verification of test equipment 

TS EN ISO 16859-3 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks 

TS EN ISO 7500-1 Metal materials - Verification of single-axis static test machines - Part 1: Tensile / compression test machines - Verification and calibration of force measuring system 

TS EN 10361 Alloy steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometry 

TS EN 14121 Aluminum and aluminum alloys - Aluminum sheet, strip and sheet for electrotechnical applications

TS EN ISO 20482 Metallic materials - Sheet and strip - Erichsen buckling test 

TS EN 754-1 Aluminum and aluminum alloys - Cold drawn wire rod and pipe - Part 1: Technical requirements for inspection and delivery 

TS EN 755-2 Aluminum and aluminum alloys - Extruded rods, tubes and profiles - Part 2: Mechanical properties 

TS EN ISO 4499-3 Hard metals - Metallographic determination of microstructure - Part 3: Measurement of microstructure properties in Ti (C, N) and WC / cubic carbide based ser metals 

TS EN ISO 4499-3 Hard metals - Metallographic determination of microstructure - Part 3: Measurement of microstructure properties in Ti (C, N) and WC / cubic carbide based ser metals 

TS EN ISO 4499-4 Hard metals - Metallographic determination of microstructure - part 4: Properties of porosity, carbon defects and eta phase content 

TS EN ISO 4499-4 Hard metals - Metallographic determination of microstructure - part 4: Properties of porosity, carbon defects and eta phase content 

TS EN ISO 4829-2 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method part 2: Samples containing% 0,01-0,05 silicon 

TS EN ISO 4938 Steel and iron-Nickel determination-Gravimetric or titrimetric method 

TS EN ISO 4946 Steel and cast iron - Determination of copper - 2,2 dicinolyl spectrophotometric method 

TS EN 10305-1 Steel tubes for precision applications - Technical delivery conditions - Part 1: Cold drawn seamless tubes 

TS EN 10305-4: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 4: Cold drawn seamless tubes for hydraulic and pneumatic power systems 

TS EN 10305-5: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 5: Cold-dimensioned, welded, square and rectangular tubes 

TS EN 10305-6: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 6: Cold drawn, welded tubes for hydraulic and pneumatic power systems 

TS EN 10305-2: 2016 Steel tubes - for precision applications - Technical delivery conditions - Part 2: Cold drawn welded tubes 

TS EN 10305-3: 2016 Steel tubes - For precision applications - Technical delivery conditions - Part 3: Cold-dimensioned welded tubes

TS EN ISO 11970: 2016 Compliance and specification of welding procedures for welding of steel castings 

TS EN 12392: 2016 Aluminum and aluminum alloys - Formable products - Special requirements for products used in the manufacture of pressure equipment 

TS EN 16774 Safety in Machinery - Safety requirements for steel converters and related equipment 

TS EN 1754 Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Short demonstration system

TS EN ISO 7153-1 Surgical instruments - Materials - Part 1: Metals 

TS EN ISO 6508-1 Metallic materials- Rockwell hardness test- Part 1: Test method 

TS ISO 12135 Metallic materials-Combined test method for determination of quartzist fracture toughness 

TS EN 755-1: 2016 Aluminum and aluminum alloys - Extruded wire rods, pipes and profiles - Part 1: Technical inspection and delivery conditions 

TS EN 12163: 2016 Copper and copper alloys - Rods for general purposes 

TS EN ISO 8049 Ferronickel scraps - Sampling for analysis 

TS EN ISO 6892-1 Metallic materials - Tensile test - Part 1: Test method at ambient temperature 

TS EN 10228-3: 2016 Non-destructive testing of forged steels - Part 3: Ultrasonic testing of ferritic or martensitic forged steels 

TS EN 10228-3: 2016 Non-destructive testing of forged steels - Part 3: Ultrasonic testing of ferritic or martensitic forged steels 

TS EN 10228-2: 2016 Non-destructive testing of forged steels - Part 2: Penetrant testing 

TS EN 10228-2: 2016 Non-destructive testing of forged steels - Part 2: Penetrant testing 

TS EN 10228-4: 2016 Non-destructive testing of forged steels - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings 

TS EN 10228-4: 2016 Non-destructive testing of forged steels - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings 

TS EN 12164: 2016 Copper and copper alloys - Rods for vending machines 

TS EN 12168: 2016 Copper and copper alloys - Hollow bars for vending machines 

TS EN 485-1: 2016 Aluminum and aluminum alloys tape strip and sheet section 1: Technical requirements for inspection and delivery 

TS EN 10272 Stainless steel bars for pressure purposes 

TS EN 10272 Stainless steel bars for pressure purposes 

TS EN 10213 + A1 Steel castings for pressure purposes 

TS EN 12166: 2016 Copper and copper alloys - Wires - for general purposes 

TS EN 12167: 2016 Copper and copper alloys - Profiles and rectangular rods for general purposes 

TS EN 12165 Copper and copper alloys - Formed and unformed forged drawing 

TS EN 10028-7 Flat steel products for pressure purposes - Part 7: Stainless steels 

TS EN 10028-7 Flat steel products for pressure purposes - Part 7: Stainless steels 

TS EN 755-8 Aluminum and aluminum alloys - Extruded wire rods, pipes and profiles - Part 8: Porthole pipes, size and shape tolerances 

TS EN 754-7 Aluminum and aluminum alloys - Cold drawn wire rod / bar and tube - Part 7: Seamless tubes, size and shape tolerances 

TS EN 754-8 Aluminum and aluminum alloys - Cold drawn wire short rod / bar and tube - Part 8: Size and shape tolerances of portholes 

TS EN 755-7 Aluminum and aluminum alloys - Extruded wire rods, pipes and profiles - Part 7: Seamless tubes, size and shape tolerances 

TS EN 755-9 Aluminum and aluminum alloys - Extruded rods, tubes and profiles - Part 9: Profiles, size and shape tolerances 

TS EN 10314 Method for obtaining the lowest permanent stress values ​​at high temperatures

TS EN 485-2 Aluminum and aluminum alloys - Sheet metal, strip and plate - Part 2: Mechanical properties 

TS EN 755-1 Aluminum and aluminum alloys - Extruded rods, tubes and profiles - Part 1: Technical inspection and delivery conditions 

TS EN 10228-1 Non-destructive testing of forged steels - Part 1: Magnetic particle inspection 

TS EN 10228-1 Non-destructive testing of forged steels - Part 1: Magnetic particle inspection 

TS EN 16774 Safety in Machinery - Safety requirements for steel converters and related equipment   

TS EN 10363 Continuous hot-rolled patterned steel and wide strip-cut strip and plate / sheet - tolerances of dimensions and shape 

TS EN 10027-1 Short designation of steels - Part 1: Steel names 

TS EN ISO 148-1 Metallic materials- Charpy tapping test- Part 1: Test method 

TS EN ISO 148-2 Metallic materials-Charpy tapping test-Part 2: Verification of test machine (pendulum tapping) 

TS EN ISO 148-3 Metallic materials-Charpy tapping test-Part 3: Preparation and characterization of v-notch test pieces for indirect evaluation of tapping 

TS EN 754-2 Aluminum and aluminum alloys-Cold drawn wire short rod / bar and tube-Part 2: Mechanical properties 

TS EN 1412 Copper and copper alloys - European numbering system 

TS EN 10205 Cold rolled tin products - black plate 

TS EN ISO 14577-4 Metallic materials - Instrument trace test for hardness and material parameters - Part 4: Test method for metallic and non-metallic coatings 

TS EN ISO 3928 Sintered metal materials, except hard metals - fatigue test pieces 

TS EN ISO 3928 Sintered metal materials, except hard metals - fatigue test pieces 

TS ISO 13521 Cast steel with austenitic manganese 

TS EN ISO 16440 Oil and gas industries - Pipeline transport systems - Design, construction and maintenance of steel jacketed pipelines 

TS EN ISO 6892-1 Metallic materials - Tensile test - Part 1: Test method at ambient temperature   

TS EN 755-2 Aluminum and aluminum alloys - Extruded rods, tubes and profiles - Part 2: Mechanical properties

TS EN 10253-1 / D1 Pipe fittings - Butt welded - Part 1: General purpose formable carbon steel without special inspection 

TS EN 10056-1 Structural steels - L profiles and angles - Part 1: Dimensions 

TS EN 10152 Flat rolled products of cold-rolled steel coated with electrolytic zinc for cold forming - Technical delivery conditions 

TS EN 10365 Hot rolled steel channels, I and H profiles - Dimensions and masses 

TS EN 12020-2 Aluminum and aluminum alloys - Precision profiles made by extrusion of en aw- 6060 and en aw- 6063 alloys - part 2: Size and shape tolerances 

TS EN ISO 12696 Cathodic protection of steel in concrete 

TS EN ISO 12696 Cathodic protection of steel in concrete 

TS EN 10056-2 / D1 Structural steels - L profiles and angles - Part 2: Shape and dimension tolerances 

TS ISO 10474 Steel and steel products - Inspection document  

TS ISO 12107 Metallic materials - Fatigue testing - Statistical planning and analysis of data 

TS EN 10056-1 Structural steels - L profiles and angles - Part 1: Dimensions   

TS EN 12421 Magnesium and magnesium alloys - Non-alloy magnesium 

TS EN 12020-2: 2016 / AC Aluminum and aluminum alloys - Precision profiles made by extrusion of en aw- 6060 and en aw- 6063 alloys - part 2: Size and shape tolerances

TS EN 515 Aluminum and aluminum alloys - Formable products - Temper briefs 

TS EN 515 Aluminum and aluminum alloys - Formable products - Temper briefs 

TS EN ISO 4885 Iron-based materials-Heat treatment - Dictionary 

TS EN 1559-5 Castings - Technical delivery conditions - Part 5: Additional requirements for magnesium alloy castings 

TS EN ISO 16120-2 Non-alloy steel - Bar - For wire conversion - Part 2: Specific requirements for general purpose bars 

TS EN 16914 Aluminum and aluminum alloys - Hot rolled armor plates in weldable aluminum alloy - Technical delivery conditions

TS EN 40-5 Lighting poles - Part 5: Requirements for steel lighting poles

TS EN ISO 204 Metallic materials-Stress uniaxial creep test-Test method 

TS 205-2 ISO 7801 Metallic materials - Wire - Bending test

TS EN ISO 6507-3 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks

TS EN ISO 6507-1 Metallic materials - Vickers hardness test - Part 1: Test method 

TS EN ISO 6507-2 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of test equipment

TS EN 485-3 Aluminum and aluminum alloys - Sheet metal, strip and plates - Part 3: Dimension and shape tolerances of hot rolled products

TS EN 487 Aluminum and aluminum alloys-Rolling ingots-Properties 

TS 491 EN 610 / tst T2 Tin and tin alloys- ingot tin

TS EN 523 Steel strip sheaths - for prestressed reinforcement - Terms, specifications, quality control 

TS EN 524-3 Steel strip sheaths - Test methods for prestressed reinforcement - Part 3: Forward-backward bending test 

TS EN 524-4 Steel strip sheaths - Test methods for prestressed reinforcement part 4: Determination of resistance to lateral load 

TS EN 524-6 Steel strip sheaths - Test methods for prestressed reinforcement - Part 6: Water tightness determination (water loss determination) 

TS EN 546-1 Aluminum and aluminum alloys-Foil-Part 1: Inspection and technical delivery conditions 

TS EN 546-3 Aluminum and aluminum alloys-Foil-Part 3: Dimension tolerances 

TS EN 546-4 Aluminum and aluminum alloys foil section 4: Special requirements

TS EN 570 Aluminum and aluminum alloys - Tapping extrusion dies made of formable products - Specifications 

TS EN 573-1 Aluminum and aluminum alloys - chemical composition and form of products which can be formed - part 1: Numerical designation system 

TS EN 573-1 Aluminum and aluminum alloys - chemical composition and form of products which can be formed - part 1: Numerical designation system 

TS EN 573-2 Aluminum and aluminum alloys - chemical composition and shape of products which can be formed - part 2: Chemical symbol based brief display system 

TS EN 573-2 Aluminum and aluminum alloys - chemical composition and shape of products which can be formed - part 2: Chemical symbol based brief display system 

TS EN 573-4 Aluminum and aluminum alloys - chemical composition and shape of formable products - part 4: Shape of products 

TS EN 573-4 Aluminum and aluminum alloys - chemical composition and shape of formable products - part 4: Shape of products

 

TS EN 576 Aluminum and aluminum alloys - non-alloy aluminum ingots for remelting - Specifications 

TS EN 577 Aluminum and aluminum alloys-Liquid metal-Specifications 

TS EN 577 Aluminum and aluminum alloys-Liquid metal-Specifications

TS EN 586-1 Aluminum and aluminum alloys - Forgings - Part 1: Technical requirements for inspection and shipment 

TS EN 586-3 Aluminum and aluminum alloys-Forging - Part 3: Tolerances on size and shape

TS 601 EN 10036 Chemical analysis methods of ferrous materials - Total carbon determination in steel and iron - Gravimetric method after combustion in oxygen flow 

TS 601 EN 10036 Chemical analysis methods of ferrous materials - Total carbon determination in steel and iron - Gravimetric method after combustion in oxygen flow 

TS EN 601 Aluminum and aluminum alloys - Castings - Chemical composition of cast materials in contact with foodstuffs 

TS EN 602 Aluminum and aluminum alloys - Formable products - Chemical composition of semi-products used in the manufacture of materials in contact with foodstuffs

TS EN 603-1 Aluminum and aluminum alloys - Formable forging draft - Part 1: Technical requirements for inspection and delivery 

TS EN 603-2 Aluminum and aluminum alloys-Formable forging dies-Section 2: Mechanical properties 

TS EN 603-3 Aluminum and aluminum alloys - Formable forged drawing - Part 3: Dimension and shape tolerances 

TS EN 604-1 Aluminum and aluminum alloys - Cast forged draft - Part 1: Technical condition for inspection and delivery 

TS EN 604-2 Aluminum and aluminum alloys- Casting forgings - Part 2: Tolerances on size and shape 

TS 491 EN 610 / T1 Tin and tin alloys - Ingot tin

TS 653 ISO 629 Determination of steel and cast iron-Manganese content-Spectrophotometric method 

TS EN 683-1 Aluminum and aluminum alloys-Serpentine- Part 1: Technical requirements for inspection and delivery 

TS EN 683-2 Aluminum and aluminum alloys - Serpentine - Part 2: Mechanical properties 

TS EN 683-3 Aluminum and aluminum alloys - Serpentines - Part 3: Dimension and shape tolerances

TS EN 754-3 Aluminum and aluminum alloys - Cold drawn wire rod / bar and tubular section 3: Round bars, size and shape tolerances 

TS EN 754-4 Aluminum and aluminum alloys - Cold drawn wire rod / bar and tube section 4: Square section bars, size and shape tolerances 

TS EN 754-5 Aluminum and aluminum alloys-Cold drawn wire rod / bar and tube-Section 5: Rectangular bars, dimension and shape tolerances 

TS EN 754-6 Aluminum and aluminum alloys - Cold drawn wire rod / bar section 6: Hexagonal bars, dimension and shape tolerances

TS EN 755-3 Aluminum and aluminum alloys - Extruded wire rods, tubes and profiles - Part 3: Round bars, dimension and shape tolerances 

TS EN 755-4 Aluminum and aluminum alloys - Extruded wire rods, tubes and profiles - Part 4: Square section bars, size and shape tolerances 

TS EN 755-5 Aluminum and aluminum alloys - Extruded wire rods, tubes and profiles - Part 5: Rectangular bars, dimension and shape tolerances 

TS EN 755-6 Aluminum and aluminum alloys - Extruded wire rods, tubes and profiles - Part 6: Hexagonal bars, dimension and shape tolerances 

TS 783 ISO 715 Determination of Zinc-Lead content-Polarographic method 

TS ISO 791 Magnesium alloys - Determination of aluminum - 8-Hydroxyquinoline gravimetric method 

TS ISO 792 Magnesium and magnesium alloys - Determination of iron - Orthophenanthroline photometric method 

TS ISO 793 Aluminum and aluminum alloys - Determination of iron - Orthophenanthroline photometric method 

TS ISO 794 Magnesium and magnesium alloys - Determination of copper content - Oxyldihydrazide photometric method

TS ISO 795 Aluminum and aluminum alloys - Determination of copper content - Oxyldihydrazide photometric method 

TS ISO 796 Aluminum alloys - Determination of copper - Electrolytic method 

TS ISO 797 Aluminum and aluminum alloys - Determination of silicon - Gravimetric method 

TS ISO 808 Aluminum and aluminum alloys - Determination of silicon - Spectrophotometric method with reduced silicomolybdic complex

TS EN ISO 945-1 Microstructure of cast iron - Part 1: Classification of graphite by visual analysis 

TS EN ISO 945-1 / AC Cast iron microstructure - Part 1: Classification of graphite by visual analysis 

TS ISO 946 Gray cast iron - Notched tapping test 

TS ISO 946 Gray cast iron - Notched tapping test

Zinc and zinc alloys - Chemical analysis - Part 1122: Determination of aluminum in zinc alloys - Titrimetric method

Zinc and zinc alloys - Chemical analysis - Part 1122: Determination of aluminum in zinc alloys - Titrimetric method

TS EN 1173 Copper and copper alloys - Brief indication of material condition 

TS EN 1179 Zinc and zinc alloys - Primary zinc 

TS ISO 1190-1 Copper and copper alloys - Short designation code - part 1: Material designation

TS EN 1254-1 Copper and copper alloys - Pipe fittings - Part 1: Hard or soft soldered fittings to copper pipes

TS EN 1274 Thermal spraying - Powders - Composition and technical supply conditions

TS EN 1301-2 Aluminum and aluminum alloys-Drawing wires-Section 2: Mechanical properties 

TS EN 1301-1 Aluminum and aluminum alloys - Pull wires - Part 1: Technical delivery and inspection requirements

TS EN 1301-3 Aluminum and aluminum alloys-Drawing wires-Section 3: Dimension tolerances

TS 1385 ISO 2135 Anodic oxidation of aluminum and aluminum alloys (anodized coating) - Accelerated determination of light fastness of colored anodic oxide coatings using artificial light 

TS EN 1386 Aluminum and aluminum alloys - Tooth plate - Specifications

TS EN 1503-4 Valves-Materials for housings, covers and housings-Part 4: Copper alloys specified in standards

TS EN 1559-6 Castings - Technical delivery conditions - Part 6: Additional features for zinc alloy castings 

TS EN 1559-1: 2011 Castings - Technical delivery conditions - Part 1: General

TS EN 1592-3 Aluminum and aluminum alloys - Hf (high frequency) seam welded pipes - Part 3: Dimension and shape tolerances for circular section pipes 

TS EN 1592-4 Aluminum and aluminum alloys - Hf (high frequency) seam welded pipes - Part 4: Size and shape tolerances for square, rectangular and shaped pipes 

TS EN 1592-2 Aluminum and aluminum alloys - Hf (high frequency) seam welded tubes - Part 2: Mechanical properties 

TS EN 1652 Copper and copper alloys - Flat products, sheets, blades, strips and discs - for general purposes 

TS EN 1652 / AC Copper and copper alloys - Flat products, sheets, bars, strips and discs - for general purposes 

TS EN 1653 Copper and copper alloys - Plate plates and discs - For boilers, pressure vessels and hot water storage tanks 

TS EN 1654 Copper and copper alloys - Ribbon for springs and fittings 

TS EN 1654 / AC Copper and copper alloys - Ribbon for springs and fittings

TS 10525 EN 1669 Aluminum and aluminum alloys - Test methods - Pleating test for sheet and strip 

TS EN 1676 Aluminum and aluminum alloys - Alloy ingots for remelting - Specifications 

TS EN 1706 Aluminum and aluminum alloys - Castings - Chemical composition and mechanical properties

TS EN 1715-3 Aluminum and aluminum alloys - Drawing draft - Part 3: Special requirements for mechanical use (excluding welding) " 

TS EN 1715-4 Aluminum and aluminum alloys - Drawing draft - Part 4: Special requirements for welding applications "

TS EN 1753 Magnesium and magnesium alloys - Magnesium alloy ingots and castings

TS EN 1758 Copper and copper alloys - Strip for conductive frames 

TS EN 1774 Zinc and zinc alloys - alloys for foundry purposes - ingot and liquid

TS EN 1780-1 Aluminum and aluminum alloys - Brief presentation of alloyed aluminum ingots for remelting, pre-alloys and castings - Part 1: Digital display system 

TS EN 1780-2 Aluminum and aluminum alloys - Brief display of alloyed aluminum ingots for remelting, pre-alloys and castings - part 2: Brief display system based on chemical symbol

Steel and iron-chromium determination-Potentiometric method or titration method

TS ISO 1812 Copper alloys-Determination of iron content-1, 10-Phenanthroline spectrophotometric method

TS EN 1965-1: 2011 Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion in copper base material

TS EN 1978 Copper and copper alloys - Copper cathodes

TS EN 1981 Copper and copper alloys - Pre-alloys 

TS EN 1982 / T1 Copper and copper alloys - ingots and castings 

TS EN 1982 Copper and copper alloys - ingots and castings 

TS 2023-1 EN ISO 2566-1 Steels - Conversion of elongation values ​​- part 1: Carbon and less alloy steels 

Steels - Conversion of elongation values ​​- Part 2023: Austenitic steels TS 2-2566 

TS ISO 2037 Stainless steel tubes for food industry

TS EN 2076-2 Aviation series; Aluminum and magnesium alloy ingots and castings - Technical specifications section 2: Ingots for remelting 

TS EN 2076-2 Aviation series; Aluminum and magnesium alloy ingots and castings - Technical specifications section 2: Ingots for remelting

TS EN 2157-1 Aviation series-Steel-Forging draft and forging-Technical specifications; Section 1: General rules 

TS EN 10025-4 Hot rolled structural steels - Part 4: Technical delivery conditions for thermomechanically rolled, fine grain weldable structural steels 

TS EN 10025-4 Hot rolled structural steels - Part 4: Technical delivery conditions for thermomechanically rolled, fine grain weldable structural steels

TS 2276 ISO 3116 Magnesium and magnesium alloys - formable magnesium alloys 

TS 2305 EN ISO 2738 Sintered metal materials other than hard metals - Sintered permeable materials - Determination of density, oil content and open porosity

TS ISO 2354 Magnesium alloys - Determination of insoluble zirconium - Alizarin sulfonate photometric method

TS ISO 2543 Copper and its alloys-Determination of manganese-Spectrophotometric method 

TS EN 22605-3 / T1 (Number modification: TS ISO 2605-3) Pressure steel products - Determination and verification of high temperature properties - Part 3: An alternative process for obtaining high temperature yield or permanent tensile properties with limited data

TS EN 2633 Aviation series-Al-P2024-T3511 aluminum alloy, with lateral coarse particle control, 1,2 mm 

TS EN ISO 2639 Steels - Determination and verification of the effective depth obtained in carburizing and hardening 

TS 2675 EN 12373-7 Aluminum and aluminum alloys - Anodic oxidation (anodizing coating) - Part 7: Quality assessment by measuring the loss of mass after dipping into acid phosphoric acid / chromic acid solution after pore closure of acid pretreated coatings

TS EN ISO 2740 Sintered metal materials - Excluding hard metals - Tensile test pieces 

TS EN ISO 2740 Sintered metal materials - Excluding hard metals - Tensile test pieces 

TS 2780 EN ISO 2626 Copper-Hydrogen brittleness test 

TS 2780 EN ISO 2626 Copper-Hydrogen brittleness test

TS 2922 ISO 10698 Steel - Determination of antimony content - Electrothermal atomic absorption spectrometric method

TS 3051 EN 10087 Technical delivery conditions for hot-rolled steels and semi-finished products 

TS 3051 EN 10087 Technical delivery conditions for hot-rolled steels and semi-finished products 

TS 3051 EN 10087 Technical delivery conditions for hot-rolled steels and semi-finished products

TS ISO 3110 Copper alloys - Determination of aluminum - Volumetric method

TS 3142 EN ISO 3887 Steels - Determination of decarburization depth 

TS 3156 EN ISO 3651-1 Determination of intergranular corrosion resistance of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test by measuring mass loss in nitric acid medium (huey test) 

TS 3157 EN ISO 3651-2 Determination of intergranular corrosion resistance of stainless steels - Part 2: Ferritic austenitic and ferritic - austenitic (duplex) steels - Corrosion test in sulfuric acid containing media

TS EN ISO 3327 Hard materials - Determination of transverse tensile strength 

TS EN ISO 3327 Hard materials - Determination of transverse tensile strength

TS 3594 ISO 5445 Ferrosilicon - Specification and delivery conditions 

TS EN 3642 Aviation series-Rivets, filled, 100o countersunk normal dome head, titanium ti-Po2, anodized, inch based series 

TS EN 3643 Aviation series-Rivets, for full 100 ° countersunk normal head, titanium ti-Po2, anodised, inch based series

TS ISO 3738-1 / T1 (Number modification, TS EN ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method 

TS ISO 3738-1 / T1 (Number modification, TS EN ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method 

TS EN ISO 3738-1 (Formerly: TS ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method 

TS EN ISO 3738-1 (Formerly: TS ISO 3738-1) Hard metals - Rockwell hardness test (scale a) - Part 1: Test method 

TS EN ISO 3738-2 (Formerly: TS ISO 3738-2) Hard metals - Rockwell hardness test (scale a) part 2: Preparation and calibration of standard test blocks 

TS ISO 3738-2 / T1 (Number modification: TS EN ISO 3738-2) Hard metals - Rockwell hardness test (scale a) part 2: Preparation and calibration of standard test blocks 

TS ISO 3738-2 / T1 (Number modification: TS EN ISO 3738-2) Hard metals - Rockwell hardness test (scale a) part 2: Preparation and calibration of standard test blocks 

TS 3812 ISO 4997 Flat steel products - Building quality - Cold rolled steel plate 

TS 3812 ISO 4997 / tst T1 Flat steel products - Building quality - Cold rolled steel plate   

Zinc and zinc alloys - Part 3815: Analysis of solid samples by optical emission spectrometry 

Zinc and zinc alloys - Part 3815: Analysis of solid samples by optical emission spectrometry 

TS EN ISO 3815-2 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometer 

TS EN ISO 3815-2 Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometer

TS 3868 ISO 4967 Steel - Determination of non-metallic residue content - Micrographic method using standard diagrams

TS EN ISO 3907 Hard metals: Determination of total carbon content-Gravimetric method 

TS EN ISO 3908 Hard metals - Determination of insoluble (free) carbon; Gravimetric method 

TS EN ISO 3923-1 Metal powders- Determination of apparent density- Part 1: Funnel method

TS EN ISO 3927: 2011 Metallic powders - Excluding hardmetal powders - Determination of compressibility under uniaxial pressure

TS EN 4005 Aviation series - Aluminum alloy al-P5052-0 - Sheet and strip with thickness from 0,3 mm to 6 mm 

TS EN 4006 Aviation series - Aluminum alloy al-P6082-T4 or t42 - Sheet and strip of thickness 0,4 mm to 6 mm 

TS EN ISO 4022 (Formerly: TS ISO 4022) Sintered permeable metal materials - Determination of fluid permeability 

TS ISO 4022 / T1 (Number modification: TS EN ISO 4022) Sintered permeable metal materials - Determination of fluid permeability

TS ISO 4158 Ferrosilicon, ferrosilicomanganese and ferrosilicochrome - Determination of silicon content - Gravimetric method 

TS 4222 EN ISO 3325 Sintered metal materials - excluding hard metals - Determination of cross fracture strength 

TS 4222 EN ISO 3325 Sintered metal materials - excluding hard metals - Determination of cross fracture strength 

TS 4230 EN 24003 Sintered permeable metal materials - Bubble test - Determination of pore size 

TS 4231 EN 23995 Metallic powders - Determination of wet strength by cross-breaking of rectangular briquettes

Metallic powders - Determination of oxygen content by reduction method 4491: Hydrogen-reducible oxygen TS EN ISO 3 

TS EN ISO 4499-2 Hard metals - Metallographic determination of microstructure - Part 2: Wc particle size measurement 

TS EN ISO 4499-2 Hard metals - Metallographic determination of microstructure - Part 2: Wc particle size measurement

TS EN ISO 4507 Sintered iron based materials, embossed or carbo nitrided - Determination and verification of surface hardness depth by micro hardness test 

TS EN ISO 4507 Sintered iron based materials, embossed or carbo nitrided - Determination and verification of surface hardness depth by micro hardness test

TS EN ISO 4545-1 Metallic materials - Knoop hardness test - Part 1: Test method 

TS EN ISO 4545-2 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of test equipment 

TS EN ISO 4545-3 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks 

TS EN ISO 4545-4 Metallic materials - Knoop hardness test - Part 4: Hardness values ​​chart 

TS ISO 4551 Iron alloys - Sampling and sieve analysis

TS EN ISO 4934 Determination of sulfur content of steel and cast iron-Gravimetric method 

TS EN ISO 4957 Tool steels

TS 5128 ISO 5451 Ferrovanadium- specifications and delivery conditions 

TS 5129 ISO 5450 Ferrovolfram- Specifications and terms of delivery 

TS 5138 ISO 5452 Ferromolybdenum- specifications and delivery conditions

TS ISO 5446 Ferromanganese - Specifications and delivery conditions 

TS ISO 5447 Ferrosilicomanganese - Specifications and delivery conditions 

TS ISO 5448 Ferrochrome - Specifications and delivery conditions 

TS ISO 5449 Ferrosilicochrome - Specifications and delivery conditions 

TS ISO 5453 Ferroniobium-Specifications and delivery conditions 

TS ISO 5454 Ferrotitan specifications and technical delivery conditions 

TS ISO 5454 Ferrotitan specifications and technical delivery conditions

TS ISO 5949 Tool steels and bearing steels - Micrographic method for the evaluation of the distribution of carbides using reference photomicrographs 

TS ISO 5949 Tool steels and bearing steels - Micrographic method for the evaluation of the distribution of carbides using reference photomicrographs 

TS ISO 5949 Tool steels and bearing steels - Micrographic method for the evaluation of the distribution of carbides using reference photomicrographs

TS 6194 EN 23909 Hard metals - Determination of cobalt - Potentiometric method 

TS ISO 6372-1 Nickel and nickel alloys-Terms and recipes section 1: Materials 

TS ISO 6372-2 Nickel and nickel alloys - Terms and definitions section 2: Refined products 

TS ISO 6372-3 Nickel and nickel alloys - Terms and definitions section 3: Formable products and castings

TS 6510 EN 26352 Ferronickel-Nickel content tahini-Gravimetric method with dimethylglioxime 

TS 6511 EN 27520 Ferronikel - Determination of cobalt content - Flame atomic absorption spectrometric method 

TS 6512 EN 28343 Ferronickel-Silicon content determination-Gravime

TS EN ISO 6892-2: 2011 Metal materials-Tensile test section 2: High temperature test method 

TS ISO 6933 Non-destructive testing - Magnetic particle acceptance inspection of railway vehicles moving materialsCitric method

TS ISO 6957 Copper alloys - Ammonia test for tensile corrosion resistance 

TSE ISO / TR 7003 Composite format for short representation of metals

TS 7148 EN ISO 4945 (Formerly: TS 7148 ISO 4945) Determination of steel-nitrogen content-Spectrophotometric method 

tst 7150 EN ISO 4934 Steel and cast iron - Determination of sulfur content - Gravimetric method   

TS 7152 EN 24883 Determination of metallic elements by hard metals-X-ray fluorescence solution method

TS ISO 7156 Refined nickel - Sampling 

TS 7216 ISO 4382-2 Plain bearings - Copper alloys Section 2: Formable copper alloys for solid plain bearings

TS EN ISO 7539-8 Corrosion of metals and alloys - Tension corrosion test - Part 8: Preparation and use of samples for the evaluation of welded structure 

TS EN ISO 7539-9 Corrosion of metals and alloys - Tension corrosion test - Part 9: Preparation and use of pre-cracked specimens for tests under increased load or displacement

TS ISO 5252 Steel pipes-Tolerance systems

TSE ISO / TR 7468 Summaries of the average tensile breaking properties of formable steels for boilers and pressure vessels

TS EN ISO 7500-2 Metallic materials - Verification of uniaxial static testing machines - Part 2: Tensile creep testing machines - Verification of applied load 

TS ISO 7528 Nickel alloys - Determination of iron content - Titrimetric method with potassium dichromate 

TS ISO 7529 Nickel alloys - Determination of chromium content - Potentiometric titration method with ammonium iron (II) sulfate

TS ISO 7530-7 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 7: Determination of aluminum content 

TS ISO 7530-8 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 8: Determination of silicon content 

TS ISO 7530-9 Nickel alloys- Flame atomic absorption spectrometric analysis- Part 9: Determination of vanadium content

TS EN ISO 7539-2 Corrosion of metals and alloys-Stress corrosion tests-Part 2: Preparation and use of bent beam samples 

TS EN ISO 7539-3 Corrosion of metals and alloys-Tensile corrosion test-Part 3: U-Preparation and use of bending specimens 

TS EN ISO 7539-4 Corrosion of metals and alloys - Tensile corrosion test - Part 4: Preparation and use of unidirectional loaded tensile specimens 

TS EN ISO 7539-5 Corrosion of metals and alloys - Tensile corrosion tests - Part 5: C - Preparation and use of ring-shaped specimens

TS EN ISO 7539-7 Corrosion of metals and alloys stress corrosion tests - Part 7: Tests with low strain rates

TS 7602 EN 27526 Nickel, ferronickel and nickel alloys - Determination of sulfur content Infrared absorption method after combustion in an induction furnace 

TS 7603 EN 27527 Nickel, ferronickel and nickel alloys - Determination of sulfur - Iodimetric titration method after incineration in an induction furnace

TSE ISO / TR 7705 charpy v in steel specifications - Guide for determining rupture energy in notched test pieces

TS 7762 ISO 3980 Aluminum and aluminum alloys - Determination of copper - Atomic absorption spectrophotometric method

TS 205-3 EN ISO 7799 Metallic materials - Sheet and strip of thickness 3 mm or less - Reverse bending test

TS 8481 EN 39 Scaffoldings - Pipe and jointing elements - Easy to fit steel pipes - Technical delivery conditions 

TS 205-4 EN ISO 8491 Metallic materials - Pipe (full section) - Bending test

TS 8589 EN ISO 7384 Corrosion tests - Artificial atmosphere - General features

TS 8847-1 EN 611-1 Tin and tin alloys - Pewter and pewter tools - Section 1: Pewter 

TS 8847-2 EN 611-2 Tin and tin alloys- Pewter and pewter set- Part 2: Pewter set

TS ISO 8954-1 Ferroalloys - Terms and definitions - Part 1: Materials 

TS ISO 8954-2 Ferroalloys- Terms and descriptions - Part 2: Sampling and sample preparation 

TS ISO 8954-3 Ferroalloys-Terms and recipes-Part 3: Sieve analysis

TS 9170 EN 10181 Iron-based materials - Chemical analysis - Lead determination - Flame atomic absorption spectrometric method 

TS 9171 EN 10136 Chemical analysis methods of ferrous materials-Determination of nickel in steel and iron-Flame atomic absorption spectrometric method 

TS 9208 EN 10179 Chemical analysis of ferrous materials - Nitrogen (trace amounts) - Determination - Flame atomic absorption spectrophotometric method 

TS 9209 EN 10178 Chemical analysis of ferrous materials-Determination of niobium in steels-Spectrophotometric method

TS 9335 ISO 4381 plain bearings - lead and tin casting alloys for multi-layer plain bearings 

TS 9373 ISO 5832-6 Surgical implants - Metallic materials - Section 6: Machinable cobalt-Nickel-Chromium-Molybdenum alloy 

9374 ISO 5832-8 Surgical implants - Metallic materials section 8: Formable cobalt - Nickel - Chromium - Molybdenum - Tungsten - Iron alloy

TS ISO 9388 Nickel alloys - Determination of phosphorus content - Molybdenum blue molecular absorption spectrometric method

TS EN ISO 9400 Nickel based alloys - Determination of corrosion resistance between particles 

TS EN ISO 9400 Nickel based alloys - Determination of corrosion resistance between particles

TS EN ISO 9445-1 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Narrow strip and cut lengths - 

TS EN ISO 9445-1 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Narrow strip and cut lengths - 

TS EN ISO 9445-2 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Wide strip and sheet / sheet 

TS EN ISO 9445-2 Continuous cold-rolled stainless steel - Dimensional and shape tolerances - Part 1: Wide strip and sheet / sheet

TS EN ISO 9455-17 Soft solder powders - Test methods - Section 17: Surface insulation resistance comb test and displacement test of residual flux "

TS EN ISO 9556 (Former number: TS ISO 9556) Steel and iron-Determination of total carbon-Induction furnace after combustion by infrared absorption method 

TS EN ISO 9556 (Former number: TS ISO 9556) Steel and iron-Determination of total carbon-Induction furnace after combustion by infrared absorption method 

TS ISO 9556 / T1 (Number modification, TS EN ISO 9556) Steel and iron - Determination of total carbon - By infrared absorption method after burning in induction furnace 

TS ISO 9556 / T1 (Number modification, TS EN ISO 9556) Steel and iron - Determination of total carbon - By infrared absorption method after burning in induction furnace

TS ISO 9647 Determination of steel and iron-Vanadium content-Flame atomic absorption spectrometric method 

TSE ISO / TR 9721 Nickel and nickel alloys - Material description rules based on chemical symbols 

TS ISO 9722 Nickel and nickel alloys - Composition and shape of formable product 

TS ISO 9723 Nickel and nickel alloys - Rods 

TS ISO 9724 Nickel and nickel alloys - Wire and drawing draft 

TS ISO 9725 Nickel and nickel alloys - Forging 

TS 9752 EN 24496 Metal powders-Determination of acid-insoluble matter in iron, copper, tin and bronze powders

TS EN 10017 Steel bars for drawing and / or cold rolling - Dimensions and tolerances 

TS EN 10020 Description and classification of steel types

TS EN 10024 Hot rolled profiles with conical flanges-Size and shape tolerances 

TS EN 10025-5 Hot rolled structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance 

TS EN 10025-5 Hot rolled structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

tst EN 10155 Structural steels - Improved atmospheric corrosion resistance - Technical delivery conditions 

TS EN 10025-2 / T1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels 

TS EN 10025-2 / T1 Hot-rolled structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

TS EN 10028-6 Flat products in steel - for pressure purposes - Part 6: Quenched and tempered, weldable fine grain steels 

TS EN 10028-6 Flat products in steel - for pressure purposes - Part 6: Quenched and tempered, weldable fine grain steels 

TS EN 10028-3 Flat products in steel - for pressure purposes - Part 3: Normalized, weldable fine grain steels 

TS EN 10028-3 Flat products in steel - for pressure purposes - Part 3: Normalized, weldable fine grain steels 

TS EN 10028-2 Flat products made of steel - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties 

TS EN 10028-2 Flat products made of steel - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties 

TS EN 10028-5 Flat steel products for pressure purposes - Part 5: Thermomechanically rolled weldable fine grain steels 

TS EN 10028-5 Flat steel products for pressure purposes - Part 5: Thermomechanically rolled weldable fine grain steels 

TS EN 10028-4 Flat steel products for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties 

TS EN 10028-4 Flat steel products for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties 

TS EN 10028-2 / tst AC Flat steel products - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties 

TS EN 10028-2 / tst AC Flat steel products - Pressure section 2: Non-alloy and alloy steels with specified high temperature properties

TS EN 10031 Forging - Semi-finished products - Dimension, shape and mass tolerances 

TS EN 10048 Steel strip - Hot rolled - Dimension and shape tolerances

TS EN 10056-2 / tst T1 Structural steels - L profiles and angles - Part 2: Tolerances on shape and size   

TS EN 10059 Hot-rolled square section steel bars for general use - Dimensions, shape and dimension tolerances 

TS EN 10059 / T1 Hot-rolled square section steel bars for general use - Dimensions, shape and dimension tolerances 

TS EN 10060 Hot rolled round steel bars for general use - Dimensions, shape and dimension tolerances 

TS EN 10061 Hot rolled hexagonal steel bars for general use - Dimensions, shape and dimension tolerances 

TS EN 10067 Hot-rolled special profiles-Dimensions and tolerances of shape, dimension and mass 

TS EN 10067 Hot-rolled special profiles-Dimensions and tolerances of shape, dimension and mass 

TS ISO 10070 Metallic powders - Determination of the closed-specific surface area by measuring the air permeability of the powder bed under stable flow conditions 

TS ISO 10076 Metallic powders - Determination of particle size distribution by gravity sedimentation and damping in a liquid 

TS EN 10079 Definitions of steel products 

TS EN 10083-1 Steels quenched and tempered - part 1: General technical delivery conditions 

TS EN 10083-2 Steels for quenching and tempering - Part 2: General technical delivery conditions for non-alloy steels 

TS EN 10083-3 Steels for quenching and tempering - part 3: Technical delivery conditions for alloy steels 

TS EN 10084 Carburizing steels - Technical delivery conditions 

TS EN 10084 / T1 Carburizing steels - Technical delivery conditions

TS EN 10090 Valve steels and alloys for internal combustion engines 

TS EN 10092-1 Flat bars of hot-rolled spring steel - Part 1: Flat bars - Dimensions, shape and dimension tolerances 

TS EN 10092-1 Flat bars of hot-rolled spring steel - Part 1: Flat bars - Dimensions, shape and dimension tolerances 

TS EN 10092-2 Flat bars made of hot-rolled spring steel - section 2: Ribbed and corrugated spring plates - Dimensions, shape and dimension tolerances 

TS EN 10092-2 Flat bars made of hot-rolled spring steel - section 2: Ribbed and corrugated spring plates - Dimensions, shape and dimension tolerances 

TS EN 10095 Heat resistant steels and nickel alloys 

TS EN 10095 Heat resistant steels and nickel alloys

TS EN 10108 Round steel bar for cold blow molding and cold extrusion - Dimensions and tolerances

TS EN 10025-3 / tst T1 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels  

TS EN 10025-3 / tst T1 Hot rolled structural steels - Part 3: Technical delivery conditions for normalized / normalized rolled, fine grain weldable structural steels  

TS EN 10120 Steel plates and strips for welded gas cylinders 

TS EN 10130 Cold rolled low carbon steel flat products - For cold forming - Technical delivery conditions 

TS EN 10132-4 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications 

TS EN 10132-4 Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications 

TS EN 10132-3 Steel strips - Cold rolled - Technical delivery conditions for heat treatment applicable - Part 3: Steels for rehabilitation 

TS EN 10132-3 Steel strips - Cold rolled - Technical delivery conditions for heat treatment applicable - Part 3: Steels for rehabilitation 

TS EN 10132-4 / AC Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications 

TS EN 10132-4 / AC Steel strips - Cold rolled - Heat treatment applicable - Technical delivery conditions - Part 4: Spring steels and other applications 

tst EN 10137-2 Flat steel products of structural steel - Quenched, tempered or solid precipitated high yield strength plates and wide flats section 2: Conditions of delivery of quenched and tempered steels 

TS EN 10143 Continuous hot-dipped metal coated steel strip and sheets - Size and shape tolerances

TS EN 10162 Steel profiles - Cold rolled - Technical delivery conditions - Dimension and cross section tolerances

TS EN 10168 Steel products - Inspection document - Information and identification list 

TS EN 10168 Steel products - Inspection document - Information and identification list

TS EN 10188 Chemical analysis of ferrous materials-Determination of chromium in steel and iron-Flame atomic absorption spectrometric method 

TS EN 10188 Chemical analysis of ferrous materials-Determination of chromium in steel and iron-Flame atomic absorption spectrometric method 

TS EN 10202 Cold rolled tin products - Electrolytic tin coated and electrolytic chromium / chromium oxide coated steel 

TS EN 10202 / AC Cold rolled tin products - Electrolytic tin coated and electrolytic chromium / chromium oxide coated steel 

TS EN 10204 Metallic products - Types of inspection documents 

TS EN 10204 Metallic products - Types of inspection documents

TS EN 10210-2 / AC Steel profiles - Hot rolled hollow non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and cross-sectional properties

TS EN 10212 Chemical analysis of iron-based materials-Determination of arsenic in steel and iron-Spectrophotometric method 

TS EN 10212 Chemical analysis of iron-based materials-Determination of arsenic in steel and iron-Spectrophotometric method

TS EN 10217-2 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties 

TS EN 10217-3 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes 

TS EN 10217-4 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties 

TS EN 10217-5 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged welded non-alloy and alloy steel tubes with specified high temperature properties 

TS EN 10217-6 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 6: Submerged welded non-alloy steel tubes with specified low temperature properties 

TS ISO / TR 10217 Solar energy - water heating systems - material selection guide for internal corrosion

TS EN 10217-4 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties 

TS EN 10217-5 / A1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged welded non-alloy and alloy steel tubes with specified high temperature properties 

TS EN 10217-3 / A1 Steel tubes for welded pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes 

TS EN 10217-6 / A1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged welded non-alloy steel tubes with specified low temperature properties 

TS EN 10217-2 / T1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties 

TS EN 10217-2 / A1 Steel tubes - Welded - For pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified high temperature properties

TS EN 10219-1 Structural steel tubes - welded, unalloyed, cold-formed from fine grain steels - Part 1: Technical delivery conditions 

TS EN 10220 Welded steel tubes - seamless - Dimensions and masses per unit length 

TS EN 10222-1 Steel forgings - Pressure regulated - Part 1: Requirements for open die forgings

TS EN 10222-1 Steel forgings - Pressure regulated - Part 1: Requirements for open die forgings 

TS EN 10222-2 Steel forgings-Pressure section 2: Ferritic martensitic used at high temperatures 

TS EN 10222-2 Steel forgings-Pressure section 2: Ferritic martensitic used at high temperatures 

TS EN 10222-3 Forged steels - For pressure purposes - Part 3: Nickel alloy steels with defined low temperature properties 

TS EN 10222-3 Forged steels - For pressure purposes - Part 3: Nickel alloy steels with defined low temperature properties 

TS EN 10222-5 Forged steels for pressure purposes - Part 5: Austenitic, martensitic and austenitic - Ferritic stainless steels 

TS EN 10222-5 Forged steels for pressure purposes - Part 5: Austenitic, martensitic and austenitic - Ferritic stainless steels 

TS EN 10222-1 / A1 Forged steels - for pressure purposes - part 1: General specifications for open die forging 

TS EN 10222-1 / A1 Forged steels - for pressure purposes - part 1: General specifications for open die forging 

TS EN 10222-2 / AC Steel forgings - Pressure section 2: Ferritic martensitic used at high temperatures 

TS EN 10222-2 / AC Steel forgings - Pressure section 2: Ferritic martensitic used at high temperatures

TS EN 10225 Weldable structural steels for fixed off-shore structures - Technical delivery conditions

TS EN 10229 Evaluation of hydrogen resistance to steel cracking 

TS EN 10229 Evaluation of hydrogen resistance to steel cracking 

TS EN 10229 / T1 Evaluation of hydrogen cracking (no) resistance in steel products 

TS EN 10229 / T1 Evaluation of hydrogen cracking (no) resistance in steel products 

TS 4381-1 EN 10243-1 Steel mold forgings - Dimension tolerances - Part 1: Pile hammer and vertical press forging 

TS 4381-2 EN 10243-2 Steel die forgings - Dimension tolerances - Part 2: Forging blow molding on horizontal forging machines 

TS EN 10244-3 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminum coatings 

TS EN 10244-5 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel plating 

TS EN 10244-6 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings

TS EN 10244-1 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles

TS EN 10250-2 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels 

TS EN 10250-2 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels 

TS EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels 

TS EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels

TS EN 10252 Magnetic materials-Methods for measuring magnetic properties of magnetic steel sheet and strip at medium frequencies 

TS EN 10253-1 Pipe fittings - Butt welded - Part 1: General purpose formable carbon steel without special inspection 

TS EN 10253-4 Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements. 

TS EN 10253-4 / AC Butt welded pipe fittings - Part 4: Formable austenitic and austenitic ferritic (duplex) stainless steels with special inspection requirements.

TS EN 10265 Magnetic materials - Properties of steel sheets, tapes and strips with specified magnetic permeability and mechanical properties 

TS EN 10266 Steel pipes, fittings, structural hollow profiles - Symbols and descriptions for use in product standards 

TS EN 10267 Ferritic-pearlitic steels - Used in engineering applications - Precipitation hardening at hot processing temperatures 

TS EN 10267 Ferritic-pearlitic steels - Used in engineering applications - Precipitation hardening at hot processing temperatures

TS EN ISO 10270 Corrosion of metals and alloys - Water corrosion test of zirconium alloys used in nuclear power reactors 

TS EN 10271 Electrolytic zinc-nickel (zn) coated steel flat products - Technical delivery conditions

TS EN 10274 Metallic materials - Tear test with weight reduction

TS EN 10275 Metallic materials - Pipe ring hydraulic pressure test 

TS EN 10276-1 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Preparation and preparation of steel samples for oxygen determination 

TS EN 10276-2 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after melting under inert gas 

TS EN 10277-1 Bright steel products - Technical delivery conditions - Part 1: General 

TS EN 10277-2 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes 

TS EN 10277-3 Bright steel products - Technical delivery conditions - Part 3: Automatic steels 

TS EN 10277-3 Bright steel products - Technical delivery conditions - Part 3: Automatic steels 

TS EN 10277-4 Bright steel products - Technical delivery conditions - Part 4: Carburizing steels 

TS EN 10277-4 Bright steel products - Technical delivery conditions - Part 4: Carburizing steels 

TS ISO 10278 Determination of steel-manganese content-Inductively coupled plasma atomic emission spectrometric method 

TS EN 10278 Bright steel products - Dimensions and tolerances 

TS EN 10279 Hot-rolled steel profiles - tolerances on shape, size and mass

TS EN ISO 10280 Steel and iron - Determination of titanium - Diantipyrilethane spectrophotometric method 

TS 10283 EN ISO 4491-2 Metallic powders-Determination of oxygen content by reduction methods-Part 2: Mass loss by hydrogen reduction (hydrogen loss)

TS EN 10295 Heat resistant steel castings 

TS EN 10296-1 Welded round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes 

TS EN 10296-2 Welded round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel 

TS EN 10296-2 / AC Welded round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel 

TS EN 10297-2 Seamless round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel 

TS EN 10297-1 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes 

TS EN 10297-2 / AC Seamless round steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel 

TS EN 10302 Creep resistant steels - Nickel and cobalt alloys 

TS EN 10302 Creep resistant steels - Nickel and cobalt alloys 

TS EN 10302 Creep resistant steels - Nickel and cobalt alloys

TS EN 10304 Magnetic materials (iron and steel) used in relays 

TS EN 10304 Magnetic materials (iron and steel) used in relays

TS EN 10306 Ultrasonic testing of iron and steel-parallel flanged h beams and rope beams 

TS EN 10307 Non-destructive testing-Ultrasonic testing of austenitic and austenitic-ferritic stainless steel flat products with a thickness equal to 6 mm (including 6 mm) 

TS EN 10308 Non-destructive testing-Ultrasonic testing of steel bars

TS EN 10315 Routine method for the analysis of high alloy steel by x-ray fluorescence spectrometer (xrf) using a close technique 

TS EN 10315 Routine method for the analysis of high alloy steel by x-ray fluorescence spectrometer (xrf) using a close technique 

TS EN 10319-1 Metallic materials-Tensile stress relaxation tests-Part 1: Method for test machines 

TS EN 10319-2 metallic materials - Tensile stress relief test - Part 2: Procedure for bolted joint models 

TS 4823 EN 10323 Wire and steel products - bead 

TS EN 10324 Steel wire and wire products - Hose reinforcement wire 

TS EN 10324 / AC Steel wire and wire products - Hose reinforcement wire 

TS EN 10325 Steel - Determination of increase in yield strength due to heat treatment effect [furnace hardening index] 

TS EN 10325 Steel - Determination of increase in yield strength due to heat treatment effect [furnace hardening index] 

TS EN 10328 Iron and steel - Conventional depth and hardening determination after surface treatment 

TS EN 10340 Steel castings for structural use 

TS EN 10340 / AC Steel castings for structural uses 

TS EN 10341 Cold rolled sheet and strip of non-alloy and alloyed electrical steel delivered in semi-finished condition 

TS EN 10342 Magnetic materials - Classification of surface insulations of electrical steel plates, strips and films 

TS EN 10343 Steel - Technical delivery conditions - For quenching and tempering

 

TS EN 10349 Steel castings - Austenitic manganese steels

TS EN 10351: 2011 Chemical analysis of ferrous materials - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method for unalloyed and low alloy steels and sec determination 

TS EN 10351: 2011 Chemical analysis of ferrous materials - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method for unalloyed and low alloy steels and sec determination

TS ISO 10387 Metallic chrome- specifications and delivery conditions

TS ISO 10697-1 Determination of steel calcium content by flame atomic absorption spectrometry - Part 1: Determination of acid soluble calcium content 

TS EN ISO 10700 Determination of iron and steel manganese-Flame atomic absorption spectrometric method 

TS EN ISO 10714 Steel and iron - Determination of phosphorus content - phosphovanadomolybdate spectrophotometric method 

TS EN ISO 10714 Steel and iron - Determination of phosphorus content - phosphovanadomolybdate spectrophotometric method 

TSE ISO / TR 10719 Determination of steel and iron-Free carbon content-Infrared absorption method after combustion in induction furnace 

TSE ISO / TR 10719 Determination of steel and iron-Free carbon content-Infrared absorption method after combustion in induction furnace 

TS ISO 10720 / T1 (Number modification: TS EN ISO 10720) Determination of steel and iron-nitrogen content-Thermal conductivity method after melting under inert gas stream 

TS ISO 10720 / T1 (Number modification: TS EN ISO 10720) Determination of steel and iron-nitrogen content-Thermal conductivity method after melting under inert gas stream

TS EN ISO 10893-9: 2011 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic inspection of steel strips / plates used in the manufacture of welded tubes for the detection of planar defects 

TS EN ISO 10893-9: 2011 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic inspection of steel strips / plates used in the manufacture of welded tubes for the detection of planar defects 

TS EN ISO 10893-4: 2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface defects 

TS EN ISO 10893-4: 2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface defects 

TS EN ISO 10893-12: 2011 Non-destructive testing of steel pipes - Part 12: Fully automatic automatic ultrasonic thickness examination of seamless and welded (except submerged arc welded) steel pipes 

TS EN ISO 10893-12: 2011 Non-destructive testing of steel pipes - Part 12: Fully automatic automatic ultrasonic thickness examination of seamless and welded (except submerged arc welded) steel pipes 

TS EN ISO 10893-5: Non-destructive testing of steel pipes - Part 2011: Magnetic particle inspection of seamless and welded ferromagnetic steel pipes for the detection of surface defects 

TS EN ISO 10893-5: Non-destructive testing of steel pipes - Part 2011: Magnetic particle inspection of seamless and welded ferromagnetic steel pipes for the detection of surface defects 

TS EN ISO 10893-3: 2011 Non-destructive testing of steel pipes - Part 3: Automatic full perimeter leakage flux inspection of seamless and welded (except submerged arc welding) ferromagnetic steel tubes for the detection of longitudinal and / or transverse defects 

TS EN ISO 10893-3: 2011 Non-destructive testing of steel pipes - Part 3: Automatic full perimeter leakage flux inspection of seamless and welded (except submerged arc welding) ferromagnetic steel tubes for the detection of longitudinal and / or transverse defects 

TS 10975 EN 24501 Hard metals - Determination of titanium - Photometric peroxide method

TS EN ISO 11124-1 Preparation of steel surfaces - Before the application of paint and related materials - Properties of metallic abrasives sprayed with compressed air section 1: General description and classification 

TS EN ISO 11124-3 Preparation of steel surfaces - Before the application of paints and related materials - Properties of metallic abrasives sprayed with compressed air section 3: High carbon steel casting balls and grit 

TS EN ISO 11125-2 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 2: Particle size 

TS EN ISO 11125-3 Preparation of steel surfaces before the application of paints and related materials - Test methods for metallic cleaning abrasives sprayed with compressed air Part 3: Determination of hardness

TS EN ISO 11303 Corrosion of metals and alloys - Guidelines for the selection of protection methods against atmospheric corrosion 

TS EN ISO 11306 Corrosion of metals and alloys - Guidance for the exposure and assessment of metals and alloys on water at sea surface 

TS 11348 EN 10240 Steel tubes - Internal and / or external protective coatings - Specification for hot-dip galvanized coatings applied in automated installations 

TSE ISO / TR 11434 Nickel alloys- Determination of niobium and tantalum - Ion exchange method 

TSE ISO / TR 11434 Nickel alloys- Determination of niobium and tantalum - Ion exchange method 

TS ISO 11436 Nickel and nickel alloys-Determination of total boron content-Molecular absorption spectrometric method using Kürkumin 

TS ISO 11437-1 Nickel alloys-Determination of trace elements-Electrothermal atomic absorption spectrometric method part 1: General rules and dissolution of sample 

TS ISO 11437-2 Nickel alloys-Determination of trace elements-Electrothermal atomic absorption spectrometric method-Part 2: Determination of lead content 

TS ISO 11438-1 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - part 1: General requirements and sample dissolution 

TS ISO 11438-2 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - part 2: Determination of lead content 

TS ISO 11438-3 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - part 3: Determination of antimony content

TS ISO 11438-4 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - part 4: Determination of tin content 

TS ISO 11438-5 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - Part 5: Determination of tellurium content 

TS ISO 11438-6 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - part 6: Determination of thallium content 

TS ISO 11438-7 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - part 7: Determination of silver content 

TS ISO 11438-8 Ferronikel - Determination of trace element content by electrothermal atomic absorption spectrometric method - part 8: Determination of indium content 

TS ISO 11463 / T1 (Number modification: TS EN ISO 11463) Corrosion of metals and alloys-Evaluation of hollow corrosion

TS ISO 11484 Steel products-Employer's qualification system for non-destructive testing personnel 

TS EN ISO 11489 Determination of platinum in platinum alloy alloys - Gravimetric determination by reduction with mercury (1) chloride

TS ISO 11652 Steel and iron - Determination of cobalt content - Flame atomic absorption - Spectrometric method 

TS ISO 11653 Steel - Determination of high cobalt content - Potentiometric titration method after separation with ion exchanger

TS EN ISO 11782-1 (Ex: TS ISO 11782-1) Corrosion of metals and alloys - Fatigue corrosion tests - Part 1: Cycles in degradation tests 

TS EN ISO 11782-2 (Ex: TS ISO 11782-2) Corrosion of metals and alloys - Fatigue corrosion tests - Part 2: Crack propagation tests using pre-cracked test specimens 

TS ISO 11782-1 / T1 (Number modification: TS EN ISO 11782-1) Corrosion of metals and alloys - Fatigue corrosion tests - Part 1: Cycles in degradation tests 

TS ISO 11782-2 / T1 (Number modification: TS EN ISO 11782-2) Corrosion of metals and alloys - Fatigue corrosion tests - Part 2: Crack propagation tests using pre-cracked test specimens

TS EN ISO 11844-1 Corrosion of metals and alloys - Low corrosion classification of indoor / indoor atmospheres section 1: Determination and estimation of internal corrosion 

TS EN ISO 11844-2 Corrosion of metals and alloys - Low corrosion classification of internal / indoor atmospheres section 2: Determination of the corrosion effect of internal corrosion atmospheres 

TS EN ISO 11844-3 Corrosion of metals and alloys - Classification of low corrosion of indoor / indoor atmospheres section 3: Measurement of parameters affecting internal corrosion 

TS ISO 11845 Corrosion of metals and alloys - General rules for corrosion tests 

TS EN ISO 11846 (Former no: TS ISO 11846) Corrosion of metals and alloys-Determination of the intergranular corrosion resistance of aluminum alloys which can be heat treated with solution 

TS ISO 11846 / T1 (Number modification: TS EN ISO 11846) Corrosion of metals and alloys-Determination of intergranular corrosion resistance of aluminum alloys which can be applied solution heat treatment 

TS ISO 11881 Corrosion of metals and alloys - Scaling corrosion tests of aluminum alloys

TS EN ISO 12004-1 Metallic materials - Sheets and strips - Determination of forming boundary rounds - Part 1: Measurement and forming boundary diagrams in the press workshop 

TS EN ISO 12004-2 Metallic materials - Sheets and strips - Determination of forming boundary rounds - Part 2: Determination of forming boundary rounds in a laboratory

TS EN 12020-1 Aluminum and aluminum alloys - Precision profiles made by extrusion of en aw- 6060 and en aw- 6063 alloys - part 1: Technical inspection and delivery conditions

TS EN 12060 Zinc and zinc alloys - Sampling method - Rules

TS ISO 12169 Nickel oxide - Determination of nickel content - Electrolytic deposition method 

TS ISO 12169 Nickel oxide - Determination of nickel content - Electrolytic deposition method

TS EN 12258-2 Aluminum and aluminum alloys - Terms and definitions - Part 2: Chemical analysis 

TS EN 12258-2 Aluminum and aluminum alloys - Terms and definitions - Part 2: Chemical analysis 

TS EN 12258-4 Aluminum and aluminum alloys - Terms and definitions - Part 4: Residues of the aluminum industry 

TS EN 12258-3 Aluminum and aluminum alloys - Terms and definitions - Part 3: Scrap 

TS EN 12311-1 Flexible sheets for waterproofing - Part 1: Bituminous sheets for waterproofing of roofs - Determination of tensile properties

TS EN 12384 Copper and copper alloys - Determination of spring limit in strips 

TS EN 12385-6 Steel wire ropes - Safety - part 6: Bunched ropes for mineral wells 

TS EN 12385-6 Steel wire ropes - Safety - part 6: Bunched ropes for mineral wells 

TS EN 12385-8 Steel wire ropes - Safety - part 8: Towing and pulling ropes used as personnel carriers for the towing of air lines 

TS EN 12385-1 + A1 Steel wire ropes - Safety - Part 1: General requirements 

TS EN 12385-2 + A1 Steel wire ropes - Safety - part 2: Definitions, designation and classification 

TS EN 12385-3 + A1 Steel wire ropes - Safety - Part 3: Operation and maintenance information 

TS EN 12385-10 + A1 Steel wire ropes - Safety - part 10: Spiral ropes used as general structural elements 

TS EN 12385-4 + A1 Steel wire ropes - Safety - part 4: Bundle ropes for general lifting applications

TS EN 12402 Lead and lead alloys - Sampling methods for analysis

 

TS EN 12438 Magnesium and magnesium alloys - Magnesium alloys for cast anodes 

TS EN 12438 Magnesium and magnesium alloys - Magnesium alloys for cast anodes 

TS EN 12441-3 Zinc and zinc alloys-Chemical analysis-Part 3: Determination of lead, cadmium and copper-Flame atomic absorption spectrometric method 

TS EN 12441-5 Zinc and zinc alloys - Chemical analysis - part 5: Determination of iron in primary zinc - Spectrophotometric method 

TS EN 12441-5 Zinc and zinc alloys - Chemical analysis - part 5: Determination of iron in primary zinc - Spectrophotometric method 

TS EN 12441-6 Zinc and zinc alloys - Chemical analysis department 6 - Determination of aluminum and iron - Flame atomic absorption spectrophotometric method 

TS EN 12441-6 Zinc and zinc alloys - Chemical analysis department 6 - Determination of aluminum and iron - Flame atomic absorption spectrophotometric method 

TS EN 12441-7 Zinc and zinc alloys - Chemical analysis - Part 7 - Determination of tin - Flammable atomic absorption spectrometric method after extraction TS 

TS EN 12441-7 Zinc and zinc alloys - Chemical analysis - Part 7 - Determination of tin - Flammable atomic absorption spectrometric method after extraction TS 

TS EN 12441-8 Zinc and zinc alloys - Chemical analysis - Part 8 - Determination of secondary tin in zinc - Atomic absorption of flames 

TS EN 12441-8 Zinc and zinc alloys - Chemical analysis - Part 8 - Determination of secondary tin in zinc - Atomic absorption of flames 

TS EN 12441-10 Zinc and zinc alloys - Chemical analysis department 10 - Determination of chromium and titanium in zinc alloy - Spectrophotometric method " 

TS EN 12441-10 Zinc and zinc alloys - Chemical analysis department 10 - Determination of chromium and titanium in zinc alloy - Spectrophotometric method " 

TS EN 12441-11 Zinc and zinc alloys - Chemical analysis - Part 11 - Determination of silicon in zinc alloy - Spectrometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in zinc alloys - Spectrophotometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of iron in zinc alloys - Spectrophotometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441 - Determination of nickel in zinc alloy - Flame atomic absorption spectrometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441 - Determination of nickel in zinc alloy - Flame atomic absorption spectrometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of aluminum in zinc alloys - Titrimetric method - Part 1-1 / A1 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of aluminum in zinc alloys - Titrimetric method - Part 1-1 / A1 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method 

Zinc and zinc alloys - Chemical analysis - Part 12441: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method

TS EN 12474 Cathodic protection - Submarine pipelines 

TS EN 12482-1 Aluminum and aluminum alloys - Re-rolling drafts for general applications - Part 1: Features of hot-rolled re-rolling drafts 

TS EN 12482-2 Aluminum and aluminum alloys - Re-rolling drafts for general applications - Section 2: Features of cold-rolled re-rolling drafts 

TS EN 12495 Cathodic protection - offshore stationary steel structures 

TS EN 12499 / AC Internal cathodic protection of metallic structures 

TS EN 12499 Internal cathodic protection of metallic structures

TS EN 12501-1 Corrosion protection of metal materials - Possibility of corrosion in soil - Part 1: General 

TS EN 12501-2 Corrosion protection of metal materials - Possibility of corrosion in soil - Part 2: Low alloy and non-alloy ferrous materials 

TS EN 12502-1 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 1: General 

TS EN 12502-4 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 4: Factors affecting stainless steels 

TS EN 12502-2 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 2: Factors affecting copper and copper alloys 

TS EN 12502-3 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 3: Factors affecting hot-dip galvanized iron-based materials 

TS EN 12502-5 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion similarity in water distribution and storage systems - Part 5: Factors affecting cast iron, unalloyed and low alloy steels

TS EN 12548 Lead and lead alloys - Lead alloy ingots for electrical cable sheaths and sleeves 

TS EN 12588 Lead and lead alloys - Extruded lead sheets for construction

TS EN 12680-1 Casting - Ultrasonic inspection - part 1: General purpose steel castings

TS EN 12680-2 Casting - Ultrasonic inspection - part 2: Steel castings to be subjected to high stresses

TS EN ISO 12680-1 Test methods for refractory products - Part 1: Determination of dynamic young module by vibration driven pulse 

TS CR 12695 Metal chimneys - Corrosion resistance properties and test methods

TS EN ISO 12732 Corrosion of metals and alloys - Measurement of reactivation using electrochemical potentiokinitic double-loop method (based on the jihal method) 

TSE ISO / TR 12735-1 Mechanical testing of metals - Symbols used in conjunction with descriptions - Part 1: Symbols and descriptions in published standards

TS EN 12844 Zinc and zinc alloys - Castings - Specifications 

TS EN 12847 Bitumens and bituminous binders - Determination of precipitation tendencies of bitumen emulsions 

TS EN 12848 Bitumen and bituminous binders - determination of the stability of bitumen emulsions with cement 

TS EN 12861 Copper and copper alloys - Scrap 

TS EN 12883 Casting - Equipment for the production of lost models for lost wax casting processes 

TS EN 12890 Casting-sand molds and sand cores used in the production of models, model equipment and core boxes 

TS EN 12892 Casting - Equipment used in the production of lost models for lost foam casting processes 

TS EN 12893 Copper and copper alloys - Determination of the number of spiral elongation (sus) 

TS ENV 12908 Lead and lead alloys-Spark-excited-Optical emission spectrometry (oes) analysis

TS EN 12938 Tin-Alloys-Analysis methods-Determination of alloy and impurity elements by atomic spectrometry

TS EN 13147 Copper and copper alloys - Determination of permanent stresses in the boundary zone of the slit band

TS EN 13411-4: 2011 Terminators for steel wire ropes - Safety - Part 4: Sockets with metal and resin 

TS EN 13148 Copper and copper alloys - Hot dipped tin coated tape 

TS EN 13509 Cathodic protection measurement techniques

TS EN 13615 Methods for ingot tin analysis - Determination of impurity element content in tin content of% 99,85 to% 99,90 by atomic spectrometry 

TS EN 13615 Methods for ingot tin analysis - Determination of impurity element content in tin content of% 99,85 to% 99,90 by atomic spectrometry 

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster 

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster 

TS EN 13675 + A1 Safety in machinery - Safety requirements for pipe drawing, rolling and finishing equipment 

TS EN ISO 13680 / tst AC Oil and gas industry - Corrosion-resistant alloy seamless pipes - Used as casing pipe, production pipe and fitting material - Technical delivery conditions  

TS EN ISO 13680: 2010 Oil and gas industry - Corrosion resistant alloy seamless pipes - Used as casing pipe, production pipe and fastener material - Technical delivery conditions 

TS ENV 13800 Lead and lead alloys - Flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es) with lead-free analysis

TS ISO 13898-1 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 1: General rules and sample dissolution 

TS ISO 13898-2 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 2: Determination of nickel content 

TS ISO 13898-3 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 3: Determination of copper content 

TS ISO 13898-4 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 4: Determination of cobalt content 

TS EN ISO 13900 (Former no: TS ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation 

TS ISO 13900: 2001 / T1 (Number modification, TS EN ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation 

TS ISO 13902 Steel and iron - Determination of high sulfur content - Infrared absorption method after incineration in an induction furnace 

TS EN 13920-2 Aluminum and aluminum alloys - Scrap - part 2: Non-alloy aluminum scrap 

TS EN 13920-3 Aluminum and aluminum alloys - Scrap - part 3: Wire and cable scrap 

TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap 

TS EN 13920-5 Aluminum and aluminum alloys - Scrap - section 5: Two or more types of alloy scrap from the same series 

TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap 

TS EN 13920-7 Aluminum and aluminum alloys - Scrap - part 7: Cast iron scrap 

TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap 

TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap 

TS EN 13920-1 Aluminum and aluminum alloys - Scrap - part 1: General specifications, sampling and tests 

TS EN 13920-11 Aluminum and aluminum alloys - Scrap - part 11: Aluminum-copper radiator scrap 

TS EN 13920-12 Aluminum and aluminum alloys - Scrap - part 12: Single alloy scrap shavings 

TS EN 13920-13 Aluminum and aluminum alloys - Scrap - part 13: Two or more alloy scrap shavings 

TS EN 13920-14 Aluminum and aluminum alloys - Scrap - part 14: Aluminum packaging scrap 

TS EN 13920-15 Aluminum and aluminum alloys - Scrap - part 15: Aluminum packaging scrap cleaned from the coating 

TS EN 13920-16 Aluminum and aluminum alloys - Scrap - part 16: Scrap grade slag, dros and debris 

TS EN 13920-10 Aluminum and aluminum alloys - Scrap - part 10: Waste beverage aluminum cans scrap

TS EN 13957 Aluminum and aluminum alloys - Extruded round, rolled pipe - For general applications - Specifications 

TS EN 13958 Aluminum and aluminum alloys - Cold drawn, round, coiled tubing for general applications - Specifications 

TS EN 13981-1 Aluminum and aluminum alloys - products for structural rail applications - Technical requirements for inspection and delivery - Part 1: Extruded products 

TS EN 13981-2 Aluminum and aluminum alloys - Products for railway applications; Technical delivery of inspection - Part 2: Plates and sheets 

TS EN 13981-3 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 3: Castings 

TS EN 13981-4 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 4: Forging 

TS ENV 14029 Lead and lead alloys - Analysis of the lead after removal of lead by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) 

TS ENV 14029 Lead and lead alloys - Analysis of the lead after removal of lead by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) 

TS EN 14121 Aluminum and aluminum alloys - Aluminum sheet, strip and sheet for electrotechnical applications 

TS ENV 14138 Lead and lead alloys - Analysis with flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es)

TS EN 14242 Aluminum and aluminum alloys - Chemical analysis - Inductive coupling plasma optical emission spectral analysis 

TS EN 14242 Aluminum and aluminum alloys - Chemical analysis - Inductive coupling plasma optical emission spectral analysis

TS EN 13615 Methods for ingot tin analysis - Determination of impurity element content in tin content of% 99,85 to% 99,90 by atomic spectrometry 

TS EN 13615 Methods for ingot tin analysis - Determination of impurity element content in tin content of% 99,85 to% 99,90 by atomic spectrometry 

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster 

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster 

TS EN 13675 + A1 Safety in machinery - Safety requirements for pipe drawing, rolling and finishing equipment 

TS EN ISO 13680 / tst AC Oil and gas industry - Corrosion-resistant alloy seamless pipes - Used as casing pipe, production pipe and fitting material - Technical delivery conditions   

TS EN ISO 13680: 2010 Oil and gas industry - Corrosion resistant alloy seamless pipes - Used as casing pipe, production pipe and fastener material - Technical delivery conditions 

TS ENV 13800 Lead and lead alloys - Flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es) with lead-free analysis

TS ISO 13898-1 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 1: General rules and sample dissolution 

TS ISO 13898-2 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 2: Determination of nickel content 

TS ISO 13898-3 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 3: Determination of copper content 

TS ISO 13898-4 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 4: Determination of cobalt content 

TS EN ISO 13900 (Former no: TS ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation 

TS ISO 13900: 2001 / T1 (Number modification, TS EN ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation 

TS ISO 13902 Steel and iron - Determination of high sulfur content - Infrared absorption method after incineration in an induction furnace 

TS EN 13920-2 Aluminum and aluminum alloys - Scrap - part 2: Non-alloy aluminum scrap 

TS EN 13920-3 Aluminum and aluminum alloys - Scrap - part 3: Wire and cable scrap 

TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap 

TS EN 13920-5 Aluminum and aluminum alloys - Scrap - section 5: Two or more types of alloy scrap from the same series 

TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap 

TS EN 13920-7 Aluminum and aluminum alloys - Scrap - part 7: Cast iron scrap 

TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap 

TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap 

TS EN 13920-1 Aluminum and aluminum alloys - Scrap - part 1: General specifications, sampling and tests 

TS EN 13920-11 Aluminum and aluminum alloys - Scrap - part 11: Aluminum-copper radiator scrap 

TS EN 13920-12 Aluminum and aluminum alloys - Scrap - part 12: Single alloy scrap shavings 

TS EN 13920-13 Aluminum and aluminum alloys - Scrap - part 13: Two or more alloy scrap shavings 

TS EN 13920-14 Aluminum and aluminum alloys - Scrap - part 14: Aluminum packaging scrap 

TS EN 13920-15 Aluminum and aluminum alloys - Scrap - part 15: Aluminum packaging scrap cleaned from the coating 

TS EN 13920-16 Aluminum and aluminum alloys - Scrap - part 16: Scrap grade slag, dros and debris 

TS EN 13920-10 Aluminum and aluminum alloys - Scrap - part 10: Waste beverage aluminum cans

TS EN 13957 Aluminum and aluminum alloys - Extruded round, rolled pipe - For general applications - Specifications 

TS EN 13958 Aluminum and aluminum alloys - Cold drawn, round, coiled tubing for general applications - Specifications 

TS EN 13981-1 Aluminum and aluminum alloys - products for structural rail applications - Technical requirements for inspection and delivery - Part 1: Extruded products 

TS EN 13981-2 Aluminum and aluminum alloys - Products for railway applications; Technical delivery of inspection - Part 2: Plates and sheets 

TS EN 13981-3 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 3: Castings 

TS EN 13981-4 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 4: Forging 

TS ENV 14029 Lead and lead alloys - Analysis of the lead after removal of lead by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) 

TS ENV 14029 Lead and lead alloys - Analysis of the lead after removal of lead by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) 

TS EN 14121 Aluminum and aluminum alloys - Aluminum sheet, strip and sheet for electrotechnical applications 

TS ENV 14138 Lead and lead alloys - Analysis with flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es)

TS EN 14242 Aluminum and aluminum alloys - Chemical analysis - Inductive coupling plasma optical emission spectral analysis 

TS EN 14242 Aluminum and aluminum alloys - Chemical analysis - Inductive coupling plasma optical emission spectral analysis

TS EN 13615 Methods for ingot tin analysis - Determination of impurity element content in tin content of% 99,85 to% 99,90 by atomic spectrometry 

TS EN 13615 Methods for ingot tin analysis - Determination of impurity element content in tin content of% 99,85 to% 99,90 by atomic spectrometry 

TS EN 13658-1 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 1: For internal plaster 

TS EN 13658-2 Plaster carriers and plaster profiles - Metal - Definitions, requirements and test methods - Part 2: For external plaster 

TS EN 13675 + A1 Safety in machinery - Safety requirements for pipe drawing, rolling and finishing equipment 

TS EN ISO 13680 / tst AC Oil and gas industry - Corrosion-resistant alloy seamless pipes - Used as casing pipe, production pipe and fitting material - Technical delivery conditions  

TS EN ISO 13680: 2010 Oil and gas industry - Corrosion resistant alloy seamless pipes - Used as casing pipe, production pipe and fastener material - Technical delivery conditions 

TS ENV 13800 Lead and lead alloys - Flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es) with lead-free analysis

TS ISO 13898-1 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 1: General rules and sample dissolution 

TS ISO 13898-2 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 2: Determination of nickel content 

TS ISO 13898-3 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 3: Determination of copper content 

TS ISO 13898-4 Determination of steel and iron-nickel, copper and cobalt content-Inductively coupled plasma atomic emission spectrometric method-Part 4: Determination of cobalt content 

TS EN ISO 13900 (Former no: TS ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation 

TS ISO 13900: 2001 / T1 (Number modification, TS EN ISO 13900) Determination of steel-boron content-Furumin spectrophotometric method after distillation 

TS ISO 13902 Steel and iron - Determination of high sulfur content - Infrared absorption method after incineration in an induction furnace 

TS EN 13920-2 Aluminum and aluminum alloys - Scrap - part 2: Non-alloy aluminum scrap 

TS EN 13920-3 Aluminum and aluminum alloys - Scrap - part 3: Wire and cable scrap 

TS EN 13920-4 Aluminum and aluminum alloys - Scrap - Part 4: Single type formable alloy scrap 

TS EN 13920-5 Aluminum and aluminum alloys - Scrap - section 5: Two or more types of alloy scrap from the same series 

TS EN 13920-6 Aluminum and aluminum alloys - Scrap - Part 6: Two or more types of alloy scrap 

TS EN 13920-7 Aluminum and aluminum alloys - Scrap - part 7: Cast iron scrap 

TS EN 13920-8 Aluminum and aluminum alloys - Scrap - Part 8: Shredded non-ferrous metal scrap for separating aluminum scrap 

TS EN 13920-9 Aluminum and aluminum alloys - Scrap - Part 9: Aluminum scrap separated from shredded non-ferrous metal scrap 

TS EN 13920-1 Aluminum and aluminum alloys - Scrap - part 1: General specifications, sampling and tests 

TS EN 13920-11 Aluminum and aluminum alloys - Scrap - part 11: Aluminum-copper radiator scrap 

TS EN 13920-12 Aluminum and aluminum alloys - Scrap - part 12: Single alloy scrap shavings 

TS EN 13920-13 Aluminum and aluminum alloys - Scrap - part 13: Two or more alloy scrap shavings 

TS EN 13920-14 Aluminum and aluminum alloys - Scrap - part 14: Aluminum packaging scrap 

TS EN 13920-15 Aluminum and aluminum alloys - Scrap - part 15: Aluminum packaging scrap cleaned from the coating 

TS EN 13920-16 Aluminum and aluminum alloys - Scrap - part 16: Scrap grade slag, dros and debris 

TS EN 13920-10 Aluminum and aluminum alloys - Scrap - part 10: Waste beverage aluminum cans

TS EN 13957 Aluminum and aluminum alloys - Extruded round, rolled pipe - For general applications - Specifications 

TS EN 13958 Aluminum and aluminum alloys - Cold drawn, round, coiled tubing for general applications - Specifications 

TS EN 13981-1 Aluminum and aluminum alloys - products for structural rail applications - Technical requirements for inspection and delivery - Part 1: Extruded products 

TS EN 13981-2 Aluminum and aluminum alloys - Products for railway applications; Technical delivery of inspection - Part 2: Plates and sheets 

TS EN 13981-3 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 3: Castings 

TS EN 13981-4 Aluminum and aluminum alloys - Products for structural rail applications - Technical requirements for inspection and delivery - Part 4: Forging 

TS ENV 14029 Lead and lead alloys - Analysis of the lead after removal of lead by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) 

TS ENV 14029 Lead and lead alloys - Analysis of the lead after removal of lead by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) 

TS EN 14121 Aluminum and aluminum alloys - Aluminum sheet, strip and sheet for electrotechnical applications 

TS ENV 14138 Lead and lead alloys - Analysis with flame atomic absorption spectrometry (faas) or inductively coupled plasma emission spectrometry (βp-Es)

TS EN 14242 Aluminum and aluminum alloys - Chemical analysis - Inductive coupling plasma optical emission spectral analysis 

TS EN 14242 Aluminum and aluminum alloys - Chemical analysis - Inductive coupling plasma optical emission spectral analysis

TS EN ISO 14284 (Formerly: TS ISO 14284) Sampling and preparation of steel and iron for the determination of chemical composition 

TS ISO 14284: 1999 / T1 (Number modification, TS EN ISO 14284) Steel and iron - Sampling and preparation for determination of chemical composition 

TS EN 14286 Aluminum and aluminum alloys - Weldable rolled products for tanks used for the storage and transport of dangerous materials 

TS EN 14287 Aluminum and aluminum alloys - Specific requirements for the chemical composition of products to be used for the manufacture of packaging and packaging components 

TSE ISO / TR 14321 Sintered metal materials - except hard metals - Metallographic preparation and inspection 

TSE ISO / TR 14321 Sintered metal materials - except hard metals - Metallographic preparation and inspection 

TS EN 14361 Aluminum and aluminum alloys - Chemical analysis - Sampling of metal melts 

TS EN 14361 Aluminum and aluminum alloys - Chemical analysis - Sampling of metal melts 

TS EN 14392 Aluminum and aluminum alloys - Determination of properties of products in contact with food anodized oxidation 

TS EN 14436 Copper and copper alloys - Electrolytic tin plated strip 

TS EN 14505 Cathodic protection of complex structures

TS EN ISO 14577-1 Metallic materials - Instrument trace test for hardness and material parameters - Part 1: Test method 

TS EN ISO 14577-2 Metallic materials - Instrument trace test for hardness and material parameters - Part 2: Verification and calibration of test machines

TS EN 14726 Aluminum and aluminum alloys - Chemical analysis - Rules for the optical emission spectrometric analysis of sparks. 

TS EN 14726 Aluminum and aluminum alloys - Chemical analysis - Rules for the optical emission spectrometric analysis of sparks. 

TS EN 14753 Safety in machinery - Safety requirements for continuous casting machines and installations 

TS EN 14782 Self-supporting sheet metal for roofs, outer claddings and interior linings 

TS EN 14782 Self-supporting sheet metal for roofs, outer claddings and interior linings

TS EN 14868 Corrosion protection of metallic materials - Guidance for assessing the possibility of corrosion in closed water circulation systems 

TS EN 14935 Copper and copper alloys - Determination of impurities in pure copper - Et aas method 

TS EN 14936-1 Copper and copper alloys - Determination of aluminum content - Et aas method 

TS EN 14936-2 Copper and copper alloys - Determination of aluminum content - Part 2: Faas method 

TS EN 14937-1 Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method 

TS EN 14937-2 Copper and copper alloys - Determination of antimony content - Part 2: Faas method 

TS EN 14940-2 Copper and copper alloys - Determination of chromium content - Part 2: Faas method 

TS EN 14941 Copper and copper alloys - Determination of cobalt content - Faas method 

TS EN 14942-2 Copper and copper alloys - Determination of arsenic content - Part 2: Faas method 

TS EN 14977 Copper and copper alloys - Determination of tensile stress - 5 ammonia test 

TS EN 15022-3 Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption method (faas) 

TS EN 15023-3: 2010 Copper and copper alloys - Determination of nickel content - Part 2: Flame atomic absorption spectrometric method (faas) 

TS EN 15024-2 Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption method (faas) 

TS EN 15061 + A1 Safety in machines - Safety requirements for metal strip processing line machinery and equipment 

TS EN 15063-2 Copper and copper alloys - Determination of main components and impurities by wavelength-separated x-ray fluorescence spectrometry - Part 2: Routine method 

TS EN 15063-2 Copper and copper alloys - Determination of main components and impurities by wavelength-separated x-ray fluorescence spectrometry - Part 2: Routine method

TS EN 15088 Aluminum and aluminum alloys - Structural products for construction works - Technical requirements for inspection and delivery 

TS EN 15093 Safety in machines - Safety requirements for hot flat rolled shafts 

TS EN 15093 Safety in machines - Safety requirements for hot flat rolled shafts 

TS EN 15112 External cathodic protection of drilling casing pipes 

EN ISO 15156-1: 2001 Oil and gas industry - h2s in crude oil and natural gas production - Materials to be used in environments - Part 1: General rules for the selection of crack-resistant materials

TS EN 15257 Cathodic protection - Expertise and certification of cathodic protection personnel 

TS EN ISO 15324 Corrosion of metals and alloys - Evaluation of stress corrosion cracking by means of drop evaporation test 

TS EN ISO 15329 Corrosion of metals and alloys - Anodic test for the evaluation of the inter-grain corrosion sensitivity of heat-treatable aluminum alloys 

TS ISO 15349-2: 2003 / T1 (Number modification, TS EN ISO 15349-2) Non-alloy steel-Low carbon-Determination of carbon content-Part 2: Infrared absorption method after combustion in an induction furnace (preheating) 

TS EN ISO 15351 Steel and iron - Determination of nitrogen content - Thermal conductivity after melting under inert gas flow (routine method) 

TSE ISO / TR 15461 Steel forgings - Test frequency, sampling conditions and test methods for mechanical tests 

TS EN 15530 Aluminum and aluminum alloys -Environmental conditions of aluminum products- General guide for residues in standards

TS EN 15622 Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometry (FAAS) method 

TS EN ISO 15630-2: 2010 Steel - for reinforced concrete and prestressed concrete - Test methods - Part 2: Welded mesh steels

TS EN 15690-2 Ductile iron pipes, fittings and accessories - Internal polyurethane liner for pipes and fittings - Features and test methods 

TS EN 15690-2 Ductile iron pipes, fittings and accessories - Internal polyurethane liner for pipes and fittings - Features and test methods 

TS EN ISO 16151 Corrosion of metals and alloys - Accelerated cycle tests by exposure to acid salt spray, dry and wet conditions

TS EN ISO 16784-1 Corrosion of metals and alloys - Corrosion and deterioration in industrial cooling water systems - Part 1: Guidance for pilot scale assessment of additions controlling corrosion and deterioration for cooling cycle systems open cycle

TS EN ISO 17475 Corrosion of metals and alloys - Electrochemical test methods - Guidance for potentiostatic and potentiodynamic polarization measurements. 

TS EN ISO 17864 Corrosion of metals and alloys - Determination of critical pit temperature under potentiostatic control 

TS EN 10253-2 Steel pipe fittings - Butt welded - Part 2: Special inspection requirements for non-alloy and ferritic alloy steels-Dimensions, technical delivery conditions

TS ISO 2605-3 (Former no: TS ENV 22605-3) Pressure steel products - Determination and verification of high temperature properties - Part 3: An alternative process for obtaining high temperature yield or permanent tensile properties with limited data

TS EN 23878 Hard metals - Vickers hardness test 

TS EN 23878 Hard metals - Vickers hardness test

TS EN 24489 Sintered hard metals - Sampling and testing 

TS EN 24489 Sintered hard metals - Sampling and testing 

TS EN 24491-1 Metallic powders-Determination of oxygen content by reduction method-Part 1: General rules

TS EN 24497 Metal powders - Determination of part size by dry sieving 

TS EN 24503 Hardmetals-Determination of metal content-X-Ray fluorescence-Melting method 

TS EN 24503 Hardmetals-Determination of metal content-X-Ray fluorescence-Melting method 

TS EN 24829-1 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method-Part 1-Samples containing 0,05% 1,0 

TS EN 24829-1 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method-Part 1-Samples containing 0,05% 1,0 

TS EN 24829-1 Steel and cast iron-Determination of total silicon-Reduced molybdosilicate spectrometric method-Part 1-Samples containing 0,05% 1,0

TS EN 24884 Hard metals - Sampling and testing of sintered test pieces from powders 

TS EN 24884 Hard metals - Sampling and testing of sintered test pieces from powders 

TS EN 24935 Determination of steel and iron-Sulfur-Infrared absorption method after incineration in an induction furnace 

TS EN 24943 Steel and cast iron - Determination of copper - Flame atomic absorption spectrometric method 

TS EN 24943 Steel and cast iron - Determination of copper - Flame atomic absorption spectrometric method 

TS EN 24943 Steel and cast iron - Determination of copper - Flame atomic absorption spectrometric method

TS EN 24947 Steel and cast iron - Determination of vanadium content - potentiometric titration method 

TS EN ISO 26203-1 Metallic materials - Tensile test at high tensile speeds - Elastic rod type system 

TS EN 26501 Ferronikel-Specifications and delivery conditions

TS EN 28050 Ferronickel ingots or parts - Sampling for analysis 

TS EN 29658 Determination of steel-aluminum content-Flame atomic absorption spectrometer method

TS EN ISO 3785 Steel - Test piece axes display

TS EN 50162 Corrosion protection from direct current systems 

TS EN 50307 Lead and lead alloys - Lead and lead alloy sheaths and containers of electric cables

TSE ISO / TR 7003 Composite format for short representation of metals