Mining and Minerals Standards, Metallic Minerals Standards

Our company, which performs testing, inspection and certification services of Metallic Minerals such as Iron, Aluminum and Manganese, meets all of the following standards.

TS ISO 10836 Iron ores - Sampling and sampling method for physical experiments

TS ISO 9599 Copper, lead and zinc sulphide concentrates-Determination of hygroscopic moisture in analysis samples-Gravimetric method

TS 2910 ISO 3085 Iron ores - Experimental methods for sampling, sample preparation and measurement precision

TS ISO 6138 Aluminum Ores - Experimental determination of structure heterogeneity

TS ISO 6139 Experimental determination of aluminum ores-batch distribution heterogeneity

TS ISO 6140 Aluminum ores

TS ISO 8685 Aluminum ores - Sampling operations

TS ISO 10213 Aluminum ores - Determination of total iron content-Titan trichloride reduction method

TS ISO 7293 Motor performance and fuel consumption determination test method of portable chain saws

tst 3656 Sampling from copper ores

ISO 2598-1 Iron ores - Determination of silica content - Part 1: Determination of gravimetric methods

TS ISO 4295 Manganese ores and concentrates - Determination of aluminum content - Photometric and gravimetric methods

ISO 2598-1 Iron ores - Determination of silica content - Part 1: Gravimetric methods

TS 5263 / revision Preparation of pre-dried test samples for chemical analysis of iron ores

TS ISO 9682-2 Iron ores - Determination of Manganese - Part 2: Spectrophotometric method with periodate

TS 3848 Iron ores - Determination of aluminum content by complexometric titration method

TS ISO 3082 Iron ores - Sampling and sample preparation

TS ISO 2598-2 Iron ores - Determination of silica content - Part 2: Reduced molybdosilicate spectrophotometric method

TS 11440 Sölestin - used in chemical industry

TS ISO 3082 Iron ores - Sampling and sample preparation

TS ISO 3852 Iron ores - For blast furnace and direct reduction - Determination of stack density

TS ISO 11257 Iron ores - for direct reduction of shaft - Determination of the index of reduction-indexation at low temperature and the degree of metallization

tst ISO 11257 Iron ores - Direct reduction of shaft - Determination of low temperature reduction-index index and degree of metallization

tst ISO 3852 Iron ores - For blast furnace and direct reduction - Determination of stack density

TS ISO 4696-2 Iron ores for blast furnace - Determination of low temperature reduction-decomposition index by static method - Section 2: reduction with CO and N2

TS ISO 13930 Iron ores for blast furnace - Determination of low temperature reduction-decomposition index by dynamic method

TS ISO 10251 Copper, lead, zinc and nickel concentrates - Determination of mass loss in batch drying

TS ISO 12743 Copper, lead, zinc and nickel concentrates - Sampling for determination of metal and moisture content

TS ISO 12744 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the accuracy of sampling

TS ISO 13292 Copper, lead, zinc and nickel concentrates - Experimental methods for the control of systematic error in sampling

TS ISO 4701 Iron ores and direct reduced iron - Determination of particle size distribution by screening

TS ISO 11533 Iron ores - Determination of cobalt content - Flame atomic absorption spectrometric method

TS ISO 10835 Direct reduced iron and hot briquetted iron - Sampling and sample preparation

TS ISO 11534 Iron ores - Determination of tin content - Flame atomic absorption spectrometric method

TS ISO 13312 Iron ores - Determination of potassium content - Flame atomic absorption spectrometric method

TS ISO 13313 Iron ores - Determination of sodium content - Spectrometric method of flame atomic absorption

TS ISO 10203 Iron ores - Calcium content determination - Flame atomic absorption spectrometric method

TS ISO 10204 Iron ores - determination of magnesium content - flamed atomic absorption spectrometric method

TS ISO 11256 Iron ore pellets for shaft direct reduction feedstock - Determination of clustering index

TS ISO 7992 Iron ores for blasting - Determination of reduction properties under load

TS ISO 8371 Iron ores for blast furnace - Determination of decrepitation index

TS ISO 9517 Iron ores - Determination of water-soluble chloride content - Ion-selective electrode method

TS ISO 9682-1 Iron ores - Determination of manganese content - Part 1: Flame atomic absorption spectrometric method

TS ISO 9683-1 Iron ores - Determination of vanadium content - Part 1: BPHA spectrophotometric method

TS ISO 9683-2 Iron ores - Determination of vanadium content - Part 2: Flame atomic absorption spectrophotometric methods

TS ISO 10378 Copper, lead and zinc sulphide concentrates - Determination of gold and silver content - Gravimetric combustion test and atomic absorption spectrometric method

TS ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes

TS ISO 11535 Iron ores - Determination of various elements - Inductively coupled plasma atomic emission spectrometric method

TS ISO 4696-1 Iron ores for blast furnace - Determination of low temperature reduction-decomposition index by static method - Section 1: reduction with CO, CO2, H2 and N2

TS ISO 15967 Direct reduced iron - Determination of the drum and wear index of hot briquetted iron (HBI)

TS ISO 11258 Iron ore for shaft direct reduction feedstock - Determination of reduction index, degree of reduction and metallization density of reduction index

TS ISO 12742 Copper, lead and zinc sulphide concentrates - Determination of the moisture content limits of the concentrates - Flow table method

TS ISO 12745 Copper, lead and zinc ores and concentrates - Accuracy and systematic error of mass measurement techniques

TS ISO 15247 Zinc sulfide concentrates - Determination of silver content - Acid-soluble and flame atomic absorption spectrometric method

TS ISO 3087 Iron ores - Determination of moisture content of a batch

TS ISO 3271 Iron ores for blast furnace and direct reduction feedstocks - Determination of abrasion and wear indices

TS ISO 4698 Iron ore pellets for blast furnace feed stocks - Determination of free swelling index

TS ISO 4700 Iron ore pellets for blast furnace and direct reduction feedstocks - Determination of fracture strength

TS ISO 4695 Iron ores for blast furnace feed stocks - Determination of reducibility by reduction ratio

TS ISO 7215 Iron ores for blast furnace feed stocks - Determination of reducibility by the degree of final reduction index

TS ISO 12739 Zinc sulfide concentrates - Determination of zinc content - Ion exchange / titration with edta method

tst ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes

TS ISO 7764 Iron ores - Pre-drying test sample for chemical analysis

Iron ore - Sampling and sample preparation processes. ISO / ISO 3082 / Cor 1

TS 402 ISO 314 Manganese ores - Determination of carbon dioxide - Gravimetric method

TS 403 ISO 320 Manganese ores - Determination of sulfur content - Barium sulfate gravimetric methods and sulfur dioxide titrimetric method after combustion

TS 568 Manganese ores and concentrates-Calcium and magnesium determination-Edta titrimetric method

TS 569 ISO 553 Manganese ores - Determination of vanadium content - Titrimetric method and phosphotungstovanadat photometric method

TS 586 ISO 310 Manganese ores and concentrates - Determination of hygroscopic moisture in analytical samples - Gravimetric method

TS 588 Manganese ores and concentrates-Nickel determination-Spectrophotometric and flame atomic absorption spectrophotometric methods with dimethyl glioxime

TS 589 ISO 316 Manganese ore-Cobalt content determination-Nitrozo-R-Salt photometric method

TS 598 Manganese ores and concentrates-Silicon determination-Gravimetric method

TS 599 ISO 548 Manganese ores - Determination of barium oxide - Barium sulfate gravimetric method

TS 600 Chemical analysis methods of manganese ores - Determination of zinc content

TS 607 ISO 312 Manganese ores - Active oxygen determination in manganese dioxide-Titrimetric method

TS 656 ISO 621 Manganese ores - Determination of metallic iron content (metallic iron content not exceeding% 2) sulfosalicylic acid photometric method

TS 683 ISO 619 Manganese ores - Determination of chromium content - Diphenyl carbamide photometric method and silver persulfate titrimetric method

TS 1433 ISO 2596 Iron ores - Determination of hygroscopic moisture in the analysis samples-Gravimetric and karl fischer methods

TS 1434 ISO 2599 Iron ores - Determination of phosphorus content - Titrimetric method

TS 1455 ISO 2597-1 Iron ores - Determination of total iron content - Part 1: Titrimetric method after tin-II chloride reduction

TS ISO 1619 Cryolite - Natural and artificial - Preparation and storage of test samples

TS ISO 1620 Cryolite - Natural and artificial - Determination of silica content - Reduced molybdosilicate spectrophotometric method

TS ISO 1693 Cryolite - Natural and artificial - Determination of fluorine content - Modified willard-Winter method

TS ISO 1694 Cryolite - Natural and artificial - Determination of iron content - 1, 10 phenantroline photometric method

4700 Iron ore pellets - Determination of fracture strength

TS 2244 Measurement methods of apparent density and porosity of iron ore pellets

TS 2245 Iron ore density measurement methods

Determination of dispersive strength of iron ore sinter by decreasing TS 2501

ISO 2598-2 Iron ores - Determination of silica content - Part 2: Reduced molybdosilicate spectrometric method

TS 2909 ISO 3084 Iron ores - Experimental methods for evaluation of quality change

TS ISO 3086 Iron ores - Experimental methods for controlling systematic error in sampling

Sampling from TS 3299 Manganese ores

TS 3300 manganese ore used in ferromanganese production

Sampling from TS 3354 Bauxite Ores

TS 3496 Determination of specific surface areas of ground ore samples

TS 3656 Sampling from copper ores

TS 3657 Sampling from lead and zinc ores

TS ISO 4299 Manganese ores - Determination of moisture content

TS 3848 Iron ores - Determination of aluminum content by complexometric titration method

TS 3848 / T1 Iron ores - Determination of the amount of aluminum by complexometric titration method

TS ISO 4293 Manganese ores and concentrates - Determination of phosphorus content - Photometric method with Molibdovanadat extraction

TS 4298 / T1 Electrically heated blankets

TS ISO 4687-1 Iron ore industry - Phosphorus determination section 1: Molybdenum blue spectrophotometric method

TS ISO 4688-1 Iron ores - Determination of aluminum - Flame atomic absorption spectrophotometric method

TS 4751 Iron ores - Titanium determination - Photometric method with diantipyrilmeter

TS 5259 Manganese ores and concentrates -Titan determination - Spectrophotometric method with 4,4'-Diantipyrilmeter

TS ISO 5416: 2006 Direct reduced iron-determination of metallic iron-Bromine-Methanol titrimetric method

TS ISO 5418-1 Iron ores - Copper determination - 2,2 '- The spectrophotometric method with bikinolil

TS ISO 5418-2 Iron ores - Copper determination - 2,2 '- Flame atomic absorption spectrophotometric method

TS 5511 Manganese ores and concentrates - Determination of aluminum, copper, lead and zinc - Flame atomic absorption spectrophotometric method

TS 5579 Chromium ores - Determination of hygroscopic moisture content in analytical samples-Gravimetric method

General rules of chemical analysis methods of manganese ores and concentrates

TS 5870 Chromium ores - Determination of phosphorus - Spectrophotometric method with reduced molybdophosphate

TS 5973 Aluminum ores - Determination of total silicon content - Combined gravimetric and spectrophotometric method

TS 6107 Chromite - used in the metallurgical industry

TS 6301 Aluminum ores - Preparation of preliminary test samples

TS 6302 Aluminum ores - Hygroscopic moisture determination in laboratory samples-Gravimetric method

TS 6303 Aluminum ores-Phosphorus determination-Molybdenum blue spectrophotometric method

TS 6304 Aluminum ores-Aluminum determination-Edta titrimetric method

TS 6305 Iron ores - Determination of aluminum - Edta titrimetric method

TS 6395 Aluminum shoots-Iron determination-Titrimetric method

TS 6549 Manganese ores and concentrates -Potassium and sodium determination-Flame atomic emission spectrophotometric method

TS 6638 Chromium ores and concentrates - Chromium determination - Titrimetric method

TS 6919 Iron ores-Mass density determination

TS 7149 Aluminum ores - Determination of substance loss at 1075øc - Gravimetric method

TS 7157 Chromium ores - Determination of calcium and magnesium - Edta titrimetric method

TS 7158 Manganese ores and concentrates-Manganese determination-Potentiometric method

TS 7543 Manganese Ores - Sampling-Preparation of Samples

TS 7604 Chromium ores and concentrates-Determination of silicon-Molecular absorption spectrophotometric and gravimetric method

TS 7609 Aluminum ores - Titanium determination - 4,4 'diantipirilmetan spectrophotometric method

TS 7655 Sampling, sample preparation and determination of moisture content from ores containing non-ferrous metals

TS 7722 Chromium ores and concentrates-Chemical analysis methods-General rules

TS 7784 Manganese ores - Sampling - Part sample preparation methods

TS ISO 7834 Iron ores - Determination of arsenic content - Molybdenum blue spectrophotometric method

TS ISO 7953 Manganese ores and concentrates - Determination of calcium and magnesium content - Flame atomic absorption spectrophotometric method

TS ISO 7969 Manganese ores and concentrates - Determination of sodium and potassium - Flame atomic absorption spectrophotometric method

TS 8200 Chromium ore - Total iron determination - Titrimetric method after reduction

TS ISO 8263 Iron ore powders - Sintering test results

TS 8515 Chromium ores and concentrates-Aluminum determination-Complexometric method

TS ISO 8541 Manganese and chromium ores - Experimental methods for the control of systematic errors in sampling and sample preparation

TS ISO 8542 Manganese and chromium ores - Experimental methods for the evaluation of quality change and methods of checking sampling accuracy

TS 8952 Manganese ore - Iron steel - used in industry

TS 8953 Manganese Ore - Used in Chemical Industry

TS ISO 9033 Aluminum ores - Determination of the moisture content of the bulk material

TS ISO 9208 Aluminum ores-Vanadium content determination-Bpha spectrophotometric method

TS ISO 9292 Manganese ores and concentrates - Determination of total iron content - Spectrophotometric method with 1,10 phenantroline

TS ISO 9681 Manganese ores and concentrates - Determination of iron content - Flame atomic absorption spectrophotometric method

TS ISO 9685 Iron ores - Determination of nickel and / or chromium content - Flame atomic absorption spectrometric method

TS ISO 10226 Aluminum ores - experimental methods for controlling the systematic error in sampling

TS ISO 10277 Aluminum ores - experimental methods for the control of specimen accuracy

TS 10573 Nickel ore, sulfuric - used in the metallurgical industry

TS 10574 used in Cobalt ore, sulphurous-metallurgical industry

TS 10973 Manganese ores and concentrates-Total iron determination-Titrimetric method and sulfosalicylic acid spectrophotometric method after reduction

TS 11440 Sölestin - used in chemical industry

TS ISO 11459 Iron ores - Certified reference materials - Preparation and certification for use in chemical analysis

TSE ISO / TR 11945 Iron ores - Internationally traded iron ores analysis values

TS ISO 12740 Lead sulfide concentrates - Determination of gold and silver content - Flame smelting and flame atomic absorption spectrometric method using slag and cubalization

TS ISO 13310 Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method

TS ISO 13311 Iron ores - Determination of lead content - Flame atomic absorption spectrometric method

TS ISO 13545 Lead sulfur concentrates-Determination of lead content-Edta titrimetric method after acid cleavage

TS ISO 13658 Zinc sulfide concentrates-Determination of zinc content-Hydroxide precipitation and edta titrimetric method

TSE ISO / TR 15855 Copper, lead and zinc sulphide concentrates - test procedures for testing fixed scales