We provide inspection, testing and certification services for all standards related to Mining and Minerals.
All of these standards are listed below.
Tests for general properties of aggregates 10088: Process and terminology for simplified petrographic identification
TS 440 ISO 351 Solid mineral fuels - Total sulfur determination - High temperature combustion method
TS EN 1925 Natural stones - Test methods - Determination of water absorption coefficient due to capillary effect
TS ISO 10836 Iron ores - Sampling and sampling method for physical experiments
TS 5694 EN 12670 Natural stones - Terms and definitions
TS EN 1552 Underground mining machines - Mobile excavation machines working in the foot - Safety rules for cutter loaders and plow systems
TS EN 13364 Natural stones-Test methods-Determination of the breaking load in the stud hole
TS 4538 ISO 2194 Sieves used in industry - Braided wire weave, perforated sheet and electrochemically shaped plate - Brief description and size of eye openings
TS 4631 ISO 4782 Metal wires - used in industrial wire screens and braided wire fabrics
TS ISO 13909-5 Quarry and coke - Mechanical sampling - Section 5: Coke - Sampling from moving material
TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment
TS 7544 ISO 4282 Fluorite - For acid and ceramic production - Determination of mass loss at 105 ° c
TS ISO 9599 Copper, lead and zinc sulphide concentrates-Determination of hygroscopic moisture in analysis samples-Gravimetric method
TS 1824 ISO 923 Coal washing equipment-Performance evaluation
TS 2910 ISO 3085 Iron ores - Experimental methods for sampling, sample preparation and measurement precision
TS ISO 6138 Aluminum Ores - Experimental determination of structure heterogeneity
TS ISO 6139 Experimental determination of aluminum ores-batch distribution heterogeneity
TS ISO 6140 Aluminum ores
TS ISO 8685 Aluminum ores - Sampling operations
TS ISO 10213 Aluminum ores - Determination of total iron content-Titan trichloride reduction method
TS EN 1552 Underground mining machines - Mobile excavation machines - Safety rules for cutter loaders and plow systems
TS EN 13373 Natural stones-Test methods-Determination of geometric properties of units
TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment
TS EN 13919 Natural stones - Test methods - Determination of resistance to so2 degradation in humid environment
Explosion prevention and protection in underground mines - Protective systems - Section 14591: Explosion-proof ventilation structures in 1-Bar
Explosion-proof and protective systems in underground mines - Protective systems - Section 14591: Explosion-resistant ventilation structures in 1-Bar
tst 5788 Lignite - used in heating
tst 790 Steel windings used in mines
TS 3959 Graphite - Chemical analysis by photometric methods
TS EN 1936 Natural stones- Test methods- Determination of real density, apparent density, total and open porosity
tst 8614 Preparation of rock core samples for rock mechanics experiments - Determination of size and shape tolerances
TS EN 12321 + A1 Underground mining machines - Safety rules for armored foot conveyors
TS EN 12321 + A1 Underground mining machines - Safety rules for armored foot conveyors
Explosion prevention and protection in underground mines - Protective systems - Part 14591: Passive water slotted barriers
TS 1804-3 + A1 Underground mining machines - Safety rules for hydraulically driven roof supports - Part 3: Hydraulic control systems
TS EN 1804-3 + A1 Underground mining machines - Safety rules for hydraulically driven roof supports - Part 3: Hydraulic control systems
1804-1 + A1 Underground mining machines - Safety rules for hydraulic-driven roof supports - Part 1: Support units and general guidelines
1804-1 + A1 Underground mining machines - Safety rules for hydraulic-driven roof supports - Part 1: Support units and general guidelines
TS 1804-2 + A1 Underground mining machines - Safety rules for hydraulically actuated roof supports - Part 2 - Conductor and motion elements
TS EN 15162 Machinery and plants for natural stone extraction and processing
TS EN 15163 Machinery and plants for processing and processing of natural stones
TS EN 15164 Machinery and plants for natural stone extraction and processing - Safety rules for chains and belts
tst 2030 Determination of elasticity modulus and poisson ratio of rocks by uniaxial compression test
tst 2028 Determination of uniaxial compressive strength of rocks
Explosion prevention and protection in underground mines - Protective systems - Section 14591: Automatic fire extinguishing systems for gallery opening machines
Explosion prevention and protection in underground mines - Equipment and protection systems for methane drainage
Explosion prevention and protection in underground mines - Protective systems - Part 14591: Explosion proof ventilation structures in 1-Bar
Explosion prevention and protection in underground mines - Protective systems - Section 14591: Passive water barriers
TS EN 1889-1 Underground mining machines - Underground moving machines - Safety - Part 1: Rubber wheeled vehicles
Preventing explosion prevention and protection in underground mines - Protective systems - Section 14591: Explosion-proof ventilation structures in 1-Bar
TS ISO 5068-2 Brown coals and lignites - Determination of moisture content - part 2: Indirect gravimetric method for moisture in the assay sample
TS ISO 5068-1 Brown coals and lignites - Determination of moisture content - section 1: Indirect gravimetric method for total humidity
TS ISO 18283 / Cor. 1 Hard coal and coke - Manual sampling
TS 2390 / tst T2 Coal sampling
TS 5125 / tst T1 Brown coal and lignite-Sampling principles-Determination of moisture content and sampling for general analysis
TS EN 1468 Natural stones - unprocessed boards - Specifications
TS ISO 7293 Motor performance and fuel consumption determination test method of portable chain saws
Chemical analysis of magnesite and dolomite based refractory products (alternative to x-ray fluorescence method) - Chapter 10058: Flame atomic absorption spectrophotometry (faas) and inductively coupled plasma emission spectrophotometry (ıcp-Aes)
tst 3536 Determination of grindability of coal by hardgrove-machine method
tst 3656 Sampling from copper ores
TS EN 1889-1 Underground mining machines - Underground moving machines - Safety - Part 1: Rubber wheeled vehicles
tst 2388 Rules for the construction and use of sign plates for mining companies 20
TS EN 15162 Machinery and plants for extraction and processing of natural stones - Safety rules for layers
TS EN 15163 Machines and installations for extraction and processing of natural stones - Safety - Rules for diamond wire cutting machines
TS EN 15164 Machines and installations for the extraction and processing of natural stones - Safety - Rules for planes with straps and chains
TS ISO 1717 Rock drilling - Connection sizes for rotary drilling pipes and drills for dry drilling
TS ISO 1721 Rock drill - Additional steel rods for drilling long drilling - Left-hand sawing gear (27 mm and 32 mm)
TS ISO 1722 Rock drilling - Additional steel rods for drilling long drilling - Left-hand sawing gear (38 mm - 64 mm)
ISO 2598-1 Iron ores - Determination of silica content - Part 1: Determination of gravimetric methods
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS ISO 540 Determination of melting ability of fuel ashes
TS ISO 7404-2 Methods for the petrographic analysis of coals - Part 2: Methods for the preparation of coal samples
TS ISO 723 Rock drilling equipment - Forged ring head bolts and head bushings for steel drill rods with hole and hexagonal cross section
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS EN 12372 Natural stones - Test methods - Determination of bending strength under heavy loads
TS EN 1926 Natural stones - Test methods - Determination of uniaxial compressive strength
TS EN 12407 Natural stones - Test methods - Petrographical investigation
TS ISO 334 Solid mineral fuels - Determination of total sulfur - Eschka method
TS ISO 4295 Manganese ores and concentrates - Determination of aluminum content - Photometric and gravimetric methods
TS EN ISO 22721 Conveyor belts - textured with textile carcass rubber or plastic for underground mines - Specifications
ISO 2598-1 Iron ores - Determination of silica content - Part 1: Gravimetric methods
TS 5263 / revision Preparation of pre-dried test samples for chemical analysis of iron ores
TS EN 1467 Natural stones - Raw blocks - Specifications
TS EN 1468 Natural stones - Untreated plates - Specifications
tst 5869 ISO 5073 Brown coals and lignites - Determination of humic acids
TS EN 13161 Natural stones - Test methods - Determination of bending strength under constant moments
TS EN 13755 Natural stones - Test methods - Determination of water absorption at atmospheric pressure
TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor wear
TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression
TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus
TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient
TS EN 14146 Natural stones - Test methods - Determination of dynamic elasticity modulus (by measuring basic resonance frequency)
TS EN 14157 Natural stones - Determination of wear resistance
TS EN 14158 Natural stones - Test methods - Determination of breaking energy
tst EN 14205 Natural stones - Test methods - Determination of knoop hardness
TS ISO 9682-2 Iron ores - Determination of Manganese - Part 2: Spectrophotometric method with periodate
TS 3847 Plumb-used in mine well excavation
TS 2027 Determination of tensile strength of rocks
TS 8543 Determination of swelling and water resistance properties of rocks
TS 3848 Iron ores - Determination of aluminum content by complexometric titration method
TS 981 Rock bolts
TS ISO 3082 Iron ores - Sampling and sample preparation
TS ISO 7404-2 Methods for the petrographic analysis of coals - Part 2: Methods for the preparation of coal samples
TS 10521 / T1 Talk - Used in the paper industry
TS ISO 2598-2 Iron ores - Determination of silica content - Part 2: Reduced molybdosilicate spectrophotometric method
TS 11440 Sölestin - used in chemical industry
TS ISO 7404-1 Methods for petrographic analysis of bituminous coal and anthracite - Part 1: Terms and recipes
TS ISO 3082 Iron ores - Sampling and sample preparation
TS ISO 3852 Iron ores - For blast furnace and direct reduction - Determination of stack density
TS ISO 11257 Iron ores - for direct reduction of shaft - Determination of the index of reduction-indexation at low temperature and the degree of metallization
Explosive atmospheres - Explosion prevention and protection - chapter 1127: Basic concepts and methodology in mining
TSE K 303 Hydraulic Mines
TSE K 312 Laminated Woven Charcoal Bags - Polypropylene (PP)
tst ISO 11257 Iron ores - Direct reduction of shaft - Determination of low temperature reduction-index index and degree of metallization
tst ISO 3852 Iron ores - For blast furnace and direct reduction - Determination of stack density
TS EN 16564 Machines and installations for extraction and processing of natural stones - safety - Requirements for sawing / milling machines, including bridge-type numerical control (NC / CNC) versions
TS EN 15571 Machines and plants for extraction and processing of natural stones - Safety - Requirements for surface treatment machines
Tst EN 15534-4 Composites made of cellulose-based material and thermoplastic (commonly known as wood-polymer composite (WPC) or natural fiber composites (NFC) - Part 4: Specification for deck profiles and tiles
TS EN 14066 Natural stones - Test methods - Determination of the resistance to wear by thermal shock
TS ISO 5071-1 Brown coals and lignites - Determination of volatile matter in the analysis sample - Part 1: Two furnace methods
TS ISO 4696-2 Iron ores for blast furnace - Determination of low temperature reduction-decomposition index by static method - Section 2: reduction with CO and N2
TS ISO 13930 Iron ores for blast furnace - Determination of low temperature reduction-decomposition index by dynamic method
TS ISO 10251 Copper, lead, zinc and nickel concentrates - Determination of mass loss in batch drying
TS ISO 12743 Copper, lead, zinc and nickel concentrates - Sampling for determination of metal and moisture content
TS ISO 12744 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the accuracy of sampling
TS ISO 13292 Copper, lead, zinc and nickel concentrates - Experimental methods for the control of systematic error in sampling
TS ISO 5072 Brown coals and lignites - Determination of actual and apparent relative density
TS ISO 12900 Hard coal - Determination of corrosiveness
TS ISO 4701 Iron ores and direct reduced iron - Determination of particle size distribution by screening
TS ISO 11533 Iron ores - Determination of cobalt content - Flame atomic absorption spectrometric method
TS ISO 10835 Direct reduced iron and hot briquetted iron - Sampling and sample preparation
TS ISO 7404-3 Methods for the petrographic analysis of coals - Part 3: Determination of the Maseral group composition
TS ISO 7404-5 Methods for petrographic analysis of coals - Part 5: Microscopic determination of vitrinite reflectance
TS ISO 11534 Iron ores - Determination of tin content - Flame atomic absorption spectrometric method
TS ISO 13312 Iron ores - Determination of potassium content - Flame atomic absorption spectrometric method
TS ISO 13313 Iron ores - Determination of sodium content - Spectrometric method of flame atomic absorption
TS ISO 10203 Iron ores - Calcium content determination - Flame atomic absorption spectrometric method
TS ISO 10204 Iron ores - determination of magnesium content - flamed atomic absorption spectrometric method
TS ISO 11256 Iron ore pellets for shaft direct reduction feedstock - Determination of clustering index
TS ISO 7992 Iron ores for blasting - Determination of reduction properties under load
TS ISO 8371 Iron ores for blast furnace - Determination of decrepitation index
TS ISO 9517 Iron ores - Determination of water-soluble chloride content - Ion-selective electrode method
TS ISO 9682-1 Iron ores - Determination of manganese content - Part 1: Flame atomic absorption spectrometric method
TS ISO 9683-1 Iron ores - Determination of vanadium content - Part 1: BPHA spectrophotometric method
TS ISO 9683-2 Iron ores - Determination of vanadium content - Part 2: Flame atomic absorption spectrophotometric methods
TS ISO 8866 / Cor.1 Diamond drilling rig - Rotary - System C
TS ISO 8866 / Cor.2 Diamond drilling rig - Rotary - System C
TS ISO 10378 Copper, lead and zinc sulphide concentrates - Determination of gold and silver content - Gravimetric combustion test and atomic absorption spectrometric method
TS ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes
TS ISO 11722 Solid mineral fuels - hard coal - General analysis Determination of moisture content by drying the sample in nitrogen environment
TS ISO 11535 Iron ores - Determination of various elements - Inductively coupled plasma atomic emission spectrometric method
TS ISO 4696-1 Iron ores for blast furnace - Determination of low temperature reduction-decomposition index by static method - Section 1: reduction with CO, CO2, H2 and N2
TS ISO 15967 Direct reduced iron - Determination of the drum and wear index of hot briquetted iron (HBI)
TS ISO 11258 Iron ore for shaft direct reduction feedstock - Determination of reduction index, degree of reduction and metallization density of reduction index
TS ISO 12742 Copper, lead and zinc sulphide concentrates - Determination of the moisture content limits of the concentrates - Flow table method
TS ISO 12745 Copper, lead and zinc ores and concentrates - Accuracy and systematic error of mass measurement techniques
TS ISO 975 Brown coals and lignites - Determination of benzene soluble extract yield - Semi-automatic method
TS ISO 15247 Zinc sulfide concentrates - Determination of silver content - Acid-soluble and flame atomic absorption spectrometric method
TS ISO 3087 Iron ores - Determination of moisture content of a batch
TS ISO 3271 Iron ores for blast furnace and direct reduction feedstocks - Determination of abrasion and wear indices
TS ISO 4698 Iron ore pellets for blast furnace feed stocks - Determination of free swelling index
TS ISO 4700 Iron ore pellets for blast furnace and direct reduction feedstocks - Determination of fracture strength
TS ISO 4695 Iron ores for blast furnace feed stocks - Determination of reducibility by reduction ratio
TS ISO 7215 Iron ores for blast furnace feed stocks - Determination of reducibility by the degree of final reduction index
TS ISO 12739 Zinc sulfide concentrates - Determination of zinc content - Ion exchange / titration with edta method
TS 10207 1991 1: 1991 Drilling equipment Rock; rope gear drill steel equipment for percussive drilling, rated sizes 38 mm 22 mm; Technical corrigendum 1
tst ISO 11323 Iron ore and direct reduced iron ore - Terms and recipes
TS 13741 Occupational health and safety management system for Small and Medium Enterprises (SMEs) - Mining industry
TS EN 15572 Mining and natural stone tools and machines - Safety - requirements for edge finishing machines
tst 201566679 Support clamps used in mining
TS ISO 7764 Iron ores - Pre-drying test sample for chemical analysis
TSE K 533 Self Drilling Bullets - Steel Material
Iron ore - Sampling and sample preparation processes. ISO / ISO 3082 / Cor 1
TSE K 69 / T1 Hard coal - used for heating purposes
TSE K 77 Cat Litter
tst 201497284 Ulexite - Used in industry
tst 2015104341 Hard coal - used for heating purposes
TS 11653 Calcite - used in paper industry
tst 625 Adjustable iron mine posts (with friction lock)
TS ISO 5071-1 Copper, lead and zinc sulphide concentrates - Determination of mass loss of bulk material in drying
TSE K 69 Hard coal - used for heating purposes
TS 238 ISO 335 Coal - Determination of strength of caking - Roga experiment
TS 329 ISO 157: 1996 Determination of coal and sulfur types
TS 402 ISO 314 Manganese ores - Determination of carbon dioxide - Gravimetric method
TS 403 ISO 320 Manganese ores - Determination of sulfur content - Barium sulfate gravimetric methods and sulfur dioxide titrimetric method after combustion
TS 424 Manganese ores and concentrates-Arsenic determination-Spectrophotometric method
TS 427 Manganese ores and concentrates-Copper determination-Extraction spectrometric and spectrometric methods
TS 438 ISO 331 Determination of humidity in coal-analysis sample- Direct gravimetric method
TS 441 ISO 352 Solid mineral fuels-Chlorine determination at high temperature combustion method
TS 540 Wood mines
TS ISO 540 Determination of melting ability of fuel ashes
TS 568 Manganese ores and concentrates-Calcium and magnesium determination-Edta titrimetric method
TS 569 ISO 553 Manganese ores - Determination of vanadium content - Titrimetric method and phosphotungstovanadat photometric method
TS 586 ISO 310 Manganese ores and concentrates - Determination of hygroscopic moisture in analytical samples - Gravimetric method
TS 588 Manganese ores and concentrates-Nickel determination-Spectrophotometric and flame atomic absorption spectrophotometric methods with dimethyl glioxime
TS 589 ISO 316 Manganese ore-Cobalt content determination-Nitrozo-R-Salt photometric method
TS 598 Manganese ores and concentrates-Silicon determination-Gravimetric method
TS 599 ISO 548 Manganese ores - Determination of barium oxide - Barium sulfate gravimetric method
TS 600 Chemical analysis methods of manganese ores - Determination of zinc content
TS 607 ISO 312 Manganese ores - Active oxygen determination in manganese dioxide-Titrimetric method
TS 625 Adjustable iron mine posts (with friction lock)
TS 644 ISO 587 Solid mineral fuels - Determination of chlorine using Eschka mixture
TS 645 ISO 602 Coal-Mineral determination
TS 646 ISO 625 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method
TS 651 ISO 601 Solid mineral fuels - Determination of arsenic content - Silver by using the diethyl methylarylbarbamate photometric method according to Ts 1463 (iso 2590)
TS 652 ISO 609 / T1 Solid fossil fuels - Determination of carbon and hydrogen - High temperature combustion method
TS 656 ISO 621 Manganese ores - Determination of metallic iron content (metallic iron content not exceeding% 2) sulfosalicylic acid photometric method
TS 658 ISO 502 Charcoal-determination of caking strength - Gray-King coke test
TS 683 ISO 619 Manganese ores - Determination of chromium content - Diphenyl carbamide photometric method and silver persulfate titrimetric method
TS 690 ISO 589 Hard coal - Determination of total humidity
TS 711 ISO 562 Coal and coke - Determination of volatile substances
TS ISO 721 Rock drilling equipment - Tij sets
TS 729 ISO 647 Brown coals and lignites - Determination of tar, water, gas and coke yields at low temperature distillation
TS ISO 722 Rock drilling equipment - center hole, hexagonal and circular section steel studs
TS 790 Steel coils used in mines
TS 831 ISO 501 Determination of number of swelling in coal-crucible
TS 981 Rock bolts
TS 981 / T1 Rock bolts
tst 981 Rock studs
TS 1043 ISO 1017 Brown coals and lignites - Acetone soluble substance in toluene extract (determination of resinous substances)
TS 1051 ISO 1015 Brown coals and lignites - Determination of moisture content - Direct volumetric method
TS 1099 ISO 1018 Hard coal - Determination of water holding capacity
TS 1371 ISO 1213-1 Solid mineral fuels - Terms and recipes - Part 1: Terms related to coal preparation
TS 1433 ISO 2596 Iron ores - Determination of hygroscopic moisture in the analysis samples-Gravimetric and karl fischer methods
TS 1434 ISO 2599 Iron ores - Determination of phosphorus content - Titrimetric method
TS 1455 ISO 2597-1 Iron ores - Determination of total iron content - Part 1: Titrimetric method after tin-II chloride reduction
TS 1575 Charcoal preparation plant - Graphic symbols
TS 1577 ISO 1718 Rock drilling equipment - Drill rods with conical connection for impact drilling
TS ISO 1619 Cryolite - Natural and artificial - Preparation and storage of test samples
TS ISO 1620 Cryolite - Natural and artificial - Determination of silica content - Reduced molybdosilicate spectrophotometric method
TS 1651 ISO 1952 Brown coals and lignites - Extraction method for the determination of soluble sodium and potassium in dilute hydrochloric acid
TS 1688 Narrow line railways-Account, construction and maintenance rules (used in mining)
TS 1688 / T1 Narrow line railways-Account, construction and maintenance rules (used in mining)
TS ISO 1693 Cryolite - Natural and artificial - Determination of fluorine content - Modified willard-Winter method
TS ISO 1694 Cryolite - Natural and artificial - Determination of iron content - 1, 10 phenantroline photometric method
TS 1725 Coal preparation plant - Principles and rules for flow diagrams
TS 1756 ISO 1994 Hard-Oxygen content determination
1804-1 + A1 Underground mining machines - Safety rules for hydraulic-driven roof supports - Part 1: Support units and general guidelines
1804-2 + A1 Underground mining machines - Safety rules for hydraulically actuated roof supports - Section 2: Driven poles and motion elements
TS 1889-2 + A1 Underground mining machines - Underground moving machines - Safety - Part 2: Rail locomotives
TS 1999 ISO 1170 Coal and coke - Calculations based on different principles
TS 2027 Determination of tensile strength of rocks
TS 2027 / T1 Determination of tensile strength of rocks
TS 2030 Determination of the elasticity module and poisson ratio of rocks by uniaxial compression test
TS 2244 Measurement methods of apparent density and porosity of iron ore pellets
TS 2245 Iron ore density measurement methods
TS 2248 General lighting rules of underground mining enterprises
TS 2289 Classification of lignites according to total moisture content and tar yield
TS 2388 Rules for construction and use of sign plates for mining operations
TS 2397 Audibert-Arnu dilatometer test for hard coal
Determination of dispersive strength of iron ore sinter by decreasing TS 2501
ISO 2598-2 Iron ores - Determination of silica content - Part 2: Reduced molybdosilicate spectrometric method
TS 2693 Mining terms-Used in drilling and blasting
TS 2694 Mining terms-Used in ventilation
TS 2695 Mining terms-Used in drainage
TS 2696 Mining terms-Used in transport
TS 2697 Mining terms-Used in production
TS 2869 Kaolin - used in industry
TS 2904 Ventilation pipes made of vinyl coated fabric used in mining
TS 2909 ISO 3084 Iron ores - Experimental methods for evaluation of quality change
TS 2942 ISO 14180 Solid mineral fuels - Sampling guide from coal vessels
TS 2943 Sampling from coal vessels
TS ISO 3086 Iron ores - Experimental methods for controlling systematic error in sampling
TS 3099 Mining terms-Used in measurement and planning
tst ISO 3156 Wire ropes-Used in mining-impregnation compounds, lubricating oils and priming oils - properties and tests
Sampling from TS 3299 Manganese ores
TS 3300 manganese ore used in ferromanganese production
Sampling from TS 3354 Bauxite Ores
TS 3360 Wood reinforcement elements used in mines
TS 3496 Determination of specific surface areas of ground ore samples
TS 3496 Determination of specific surface areas of ground ore samples
TS 3504 Sampling from barite ores
TS 3536 Determination of grindability of coal by hardgrove method
TS ISO 3551-1 Diamond drilling rig - Rotating system a section 1: Metric units
TS ISO 3551-2 Diamond drilling rig - Rotary system a- Section 2: Inch units
TS ISO 3551-1 / T1 Diamond drilling rig - Rotary system a - Part 1: Metric units modification 1
TS ISO 3552-1 Diamond drilling rig - Rotating system b- Section 1: Metric units
TS ISO 3552-2 Diamond drilling rig - Rotary system b- Section 2: Inch units
TS 3571 Sampling from boron minerals
TS 3656 Sampling from copper ores
TS 3657 Sampling from lead and zinc ores
TS 3698 Determination of fineness in powder coal
TS 3764 Concrete blocks - Mines - Used in underground road support
TS ISO 4299 Manganese ores - Determination of moisture content
TS 3847 Plumb-used in mine well excavation
TS 3848 Iron ores - Determination of aluminum content by complexometric titration method
TS 3848 / T1 Iron ores - Determination of the amount of aluminum by complexometric titration method
TS 3960 Graphite - Determination of moisture content
TS 3960 / T1 Graphite - Determination of moisture content
TS 3961 Graphite - Determination of ash content
TS 4157 Occupational safety and occupational health - Mine exploration and operation activities - general rules
TS 4207 Determination of particle size distribution of powders
TS ISO 4293 Manganese ores and concentrates - Determination of phosphorus content - Photometric method with Molibdovanadat extraction
TS 4298 / T1 Electrically heated blankets
TS 4619 Perlite (used in agriculture)
TS 4632 Screening - coding of metal plate hole array used in industry
TS ISO 4687-1 Iron ore industry - Phosphorus determination section 1: Molybdenum blue spectrophotometric method
TS ISO 4688-1 Iron ores - Determination of aluminum - Flame atomic absorption spectrophotometric method
TS 4744 Brown coals and lignites - Principles of sampling - Determination of moisture content and sample preparation for general analysis
TS 4751 Iron ores - Titanium determination - Photometric method with diantipyrilmeter
TS 4958 Steel ropes- Used in mining- Organic fiber elements- Properties and experiments
TS 5121 Feldspar - used in the production of glass
TS 5123 Coal powder-Casting sand additive
TS 5123 / T1 Coal powder - Casting sand additive (modification 1)
TS 5125 Brown coal and lignite-Sampling principles-Determination of moisture content and sampling for general analysis
TS 5259 Manganese ores and concentrates -Titan determination - Spectrophotometric method with 4,4'-Diantipyrilmeter
TS 5359 Safety rules for geophysical teams
TS 5360 Casting bentonite
TS 5361 Chemical analysis methods of talc-Silicon dioxide, total of iron and aluminum oxides, determination of calcium oxide and magnesium oxide-Gravimetric methods
Chemical analysis methods of TS 5361 / T1 talc - Silicon dioxide, total of iron and aluminum oxides, determination of calcium oxide and magnesium oxide - Gravimetric methods
TS ISO 5416: 2006 Direct reduced iron-determination of metallic iron-Bromine-Methanol titrimetric method
TS ISO 5418-1 Iron ores - Copper determination - 2,2 '- The spectrophotometric method with bikinolil
TS ISO 5418-2 Iron ores - Copper determination - 2,2 '- Flame atomic absorption spectrophotometric method
TS 5425 Silica core sand for casting industry
TS 5426 Synthetic silica sand
TS ISO 5437 Fluorite - Used in the production of acid and ceramic - Determination of barium sulfate content - Gravimetric method
TS ISO 5439 Fluorite - used in acid production - Determination of useful fluorine content - Potentiometric method after distillation
TS 5579 Chromium ores - Determination of hygroscopic moisture content in analytical samples-Gravimetric method
TS 5632 used in barite-glass manufacturing
TS 5633 Barite - used in tire industry
TS 5695 Building and cladding stones - Sure - Classification
TS 5762 Diabase-Used as building and cladding stone
TS 5762 / T1 Diabase-Modification used as building and cladding stone 1
TS 5762 / tst T2 Diabase-Modification used as building and cladding stone 2
TS 5788 Used in lignite-heating
TS 5788 Used in lignite-heating
General rules of chemical analysis methods of manganese ores and concentrates
TS 5869 ISO 5073 Brown coals and lignites-Determination of humic acids
TS 5870 Chromium ores - Determination of phosphorus - Spectrophotometric method with reduced molybdophosphate
TS 5873 Florspar - Determination of silicon dioxide used in acid and ceramic production - Reduced molybdosilicate spectrophotometric method
TS 5959 Methods for calculating the reserve amount and grade values of mineral deposits
TS 5960 Noise control in open coal management - Rules
TS 5961 Serpentine - used as building and cladding stone
TS 5961 / T1 Serpentine - Modification used as a building and cladding stone 1
TS 5961 / tst T2 Serpentine - Modification used as building and cladding stone 2
TS 5962 Soil and rock mechanics-Terms and symbols-used in geology and mining
TS 5973 Aluminum ores - Determination of total silicon content - Combined gravimetric and spectrophotometric method
TS 6107 Chromite - used in the metallurgical industry
TS 6173 Precious and semi-precious gemstones - Classification
TS 6174 Precious and semi-transparent gemstones-Terms
TS 6175 Fluorite-Metallurgy industry used
TS 6233 Grounded perlite
TS 6234 Granite - used as a building and cladding stone
TS 6234 / T1 Granite - Modification used as building and cladding stone 1
TS 6234 / tst T2 Granite - Modification used as building and cladding stone 2
TS 6301 Aluminum ores - Preparation of preliminary test samples
TS 6302 Aluminum ores - Hygroscopic moisture determination in laboratory samples-Gravimetric method
TS 6303 Aluminum ores-Phosphorus determination-Molybdenum blue spectrophotometric method
TS 6304 Aluminum ores-Aluminum determination-Edta titrimetric method
TS 6305 Iron ores - Determination of aluminum - Edta titrimetric method
TS 6334 Fluorite-Acid used in production
TS 6335 Fluorite-Ceramic and glass used in construction
TS 6343 Salt determination in crude oil-Electrometric and potentiometric methods
TS 6395 Aluminum shoots-Iron determination-Titrimetric method
TS 6549 Manganese ores and concentrates -Potassium and sodium determination-Flame atomic emission spectrophotometric method
TS 6638 Chromium ores and concentrates - Chromium determination - Titrimetric method
TS ISO 6676 Florspar for acid and ceramic production - Determination of total phosphorus content - Reduced molybdophosphate - Spectrometric method
TS ISO 6805 Rubber hoses and hose elements for underground mining - Wire reinforced hydraulic types for coal mining
TS 6806 Gallery opening machines-Classification and specifications
Determination of hardness according to TS 6809 Mohs hardness scale
Hardness determination according to TS 6809 / T1 Mohs hardness scale
TS 6916 Casting powder (lunker powder)
TS 6918 Pumice stone used in paint industry
TS 6919 Iron ores-Mass density determination
TS 7149 Aluminum ores - Determination of substance loss at 1075øc - Gravimetric method
TS 7157 Chromium ores - Determination of calcium and magnesium - Edta titrimetric method
TS 7158 Manganese ores and concentrates-Manganese determination-Potentiometric method
TS 7292 Boring and drilling methods-In mining operations
TS 7498 Methods of loading blasting holes - Used in mining operations
TS 7499 Screen-Used in industry-Plate thickness less than 3 mm
TS 7543 Manganese Ores - Sampling-Preparation of Samples
TS 7604 Chromium ores and concentrates-Determination of silicon-Molecular absorption spectrophotometric and gravimetric method
TS 7609 Aluminum ores - Titanium determination - 4,4 'diantipirilmetan spectrophotometric method
Determination of tensile strength of rocks by indirect (indirect) method TS 7654
TS 7655 Sampling and preparation methods of gold, silver and tin ores
TS 7655 Sampling, sample preparation and determination of moisture content from ores containing non-ferrous metals
Sampling and preparation methods from TS 7656 Flotation concentrates
TS 7700 Grinding work index
TS 7722 Chromium ores and concentrates-Chemical analysis methods-General rules
TS 7784 Manganese ores - Sampling - Part sample preparation methods
TS 7811 Sedimentology test methods-Fine-section grain size measurement method
TS ISO 7834 Iron ores - Determination of arsenic content - Molybdenum blue spectrophotometric method
TS ISO 7953 Manganese ores and concentrates - Determination of calcium and magnesium content - Flame atomic absorption spectrophotometric method
TS ISO 7969 Manganese ores and concentrates - Determination of sodium and potassium - Flame atomic absorption spectrophotometric methodTS 8198 Florspar - Used in acid production
TS 8199 Florspar - used in acid production - Determination of total phosphorus - Molybdophosphate photometric method
tst 8199 Florspar- used in acid production- Determination of total phosphorus- Molybdophosphate photometric method
TS 8200 Chromium ore - Total iron determination - Titrimetric method after reduction
TS ISO 8263 Iron ore powders - Sintering test results
TS 8362 Determination of the yield properties of cylindrical hard rock core samples in uniaxial compression
TS 8433 Thin section preparation method - For hard sedimentary rocks
TS 8515 Chromium ores and concentrates-Aluminum determination-Complexometric method
TS ISO 8541 Manganese and chromium ores - Experimental methods for the control of systematic errors in sampling and sample preparation
TS ISO 8541 Manganese and chromium ores - Experimental methods for the control of systematic errors in sampling and sample preparation
TS ISO 8542 Manganese and chromium ores - Experimental methods for the evaluation of quality change and methods of checking sampling accuracy
TS ISO 8542 Manganese and chromium ores - Experimental methods for the evaluation of quality change and methods of checking sampling accuracy
TS 8543 Determination of swelling and water resistance properties of rocks
TS 8543 / T1 Determination of swelling and water resistance properties of rocks
TS 8614 Preparation of rock core samples for rock mechanics experiments Determination of size and shape tolerances
TS 8952 Manganese ore - Iron steel - used in industry
TS 8953 Manganese Ore - Used in Chemical Industry
TS ISO 9033 Aluminum ores - Determination of the moisture content of the bulk material
TS ISO 9061 Fluorite (florspar) used in the production of acid and ceramic - Determination of iron content - 1,10- Phenanthroline spectrometric method
TS ISO 9062 Fluorite (florspar) - Determination of manganese content used in the production of acid and ceramic - Periodod spectrometric method
TS 9163 Determination of feldspars in rocks - Alkali feldspars and plagioclases - Dyeing method
TS 9165 Colemanite - used in industry
TS 9192 Chromite ore - used in chemical industry
TS ISO 9208 Aluminum ores-Vanadium content determination-Bpha spectrophotometric method
TS ISO 9276-1 Display of grain size analysis results section 1: Graphical representation
TS ISO 9292 Manganese ores and concentrates - Determination of total iron content - Spectrophotometric method with 1,10 phenantroline
TS ISO 9438 Fluorite - Metallurgical purity - Determination of total phosphorus content - Reduced molybdophosphate - Spectrometric method
TS ISO 9502 Fluorite - Metallurgy purity - Determination of silicon dioxide content - Reduced molybdosilicate spectrometric method
TS ISO 9503 Fluorite - Determination of useful fluorine content used in metallurgy - Improved willard - Winter method
TS ISO 9504 Fluorite-Metallurgical purity-Determination of antimony content in extract solution-Atomic absorption spectrometric method
TS ISO 9505 Fluorite - All classes - Determination of arsenic content - Silver diethyldithiocarbamate spectrometric method
TS 9561 Meerschaum used in making ornamental items
TS ISO 9681 Manganese ores and concentrates - Determination of iron content - Flame atomic absorption spectrophotometric method
TS ISO 9685 Iron ores - Determination of nickel and / or chromium content - Flame atomic absorption spectrometric method
TS 9773 Diatomite - used in thermal insulation
TS ISO 9779 Fluorite-Metallurgy - Determination of lead content in extract solution - Atomic absorption
TS 9801 Kaolen - Brake pad used in production
TS 10042 Communication systems in underground coal operations
TS 10043 Talk-Used in ceramics industry
Chemical analysis of magnesite and dolomite refractory products (alternative method to x-ray fluorescence method) - Part 10058 - Age chemical analysis
Chemical analysis of magnesite and dolomite refractory products (alternative method to x-ray fluorescence method) - Part 10058 - Gravimetric determination of reagents, reagents
TS ISO 10086-1 Methods for evaluation of flocculants used in coal preparation - Part 1: Basic parameters
TS 10090 Industrial sieves and sifting-Terms
TS 10091 Coal-foam flotation test-Part 1-Laboratory process
TS ISO 10097-1 Diamond drilling rig - Steel cable system a - Section 1: Metric units
TS ISO 10097-2 Diamond drilling rig - Steel cable system a - Section 2: Inch units
TS ISO 10098 Diamond drilling equipment - Wire rope (wırelıne) - System cssk
TS ISO 10207 Rock-drilling equipment - Drill rig, thread diameter from 22 to 38 mm, threaded, for drill drilling
TS ISO 10208 Rock drilling equipment-Left screw threads
TS ISO 10226 Aluminum ores - experimental methods for controlling the systematic error in sampling
TS ISO 10277 Aluminum ores - experimental methods for the control of specimen accuracy
TS 10282 Magmatic rocks - Mineralogical - Petrographic determination methods - Optical method
TS 10354 Mining-Air shock and ground vibration measurement
TS 10448 Asbestos (asbestos)
TS 10449 Marble-Calcium carbonate based-Used as building and cladding stone
TS 10449 / T1 Marble-Calcium carbonate-based modification used as structure and cladding stone 1
TS 10449 / tst T2 Marble-Calcium carbonate-based modification used as building and cladding stone 2
TS 10450 Magnetite-Coal preparation-Test methods
TS 10521 Talk - used in the paper industry
TS 10522 Manganese and chromium ores - Control of the accuracy of moisture determination by experimental methods
TS 10573 Nickel ore, sulfuric - used in the metallurgical industry
TS 10574 used in Cobalt ore, sulphurous-metallurgical industry
TS ISO 9044 Woven wire fabrics used in industry - Technical specifications and tests
TS ISO 10630 Industrial plate sieves - Properties and test methods
TS 10720 Dolomite - used in glass industry
TS ISO 10752 Coal - Sizing equipment - Performance evaluation
TS ISO 10753 Coal preparation plant - Determination of the tendency of water in the coal vessels to disintegrate in water
TS 10834 Gabbro-used as a building and cladding stone
TS 10834 / T1 Modification used as gabbro-building and cladding stone 1
TS 10834 / tst T2 Gabro-modification used as a building and cladding stone 2
TS 10835 Andesite-Used as building and cladding stone
TS 10835 / T1 Andesite - Modification used as building and cladding stone 1
TS 10835 / tst T2 Andesite - Modification used as a building and cladding stone 2
TS 10973 Manganese ores and concentrates-Total iron determination-Titrimetric method and sulfosalicylic acid spectrophotometric method after reduction
TS 10974 Florspar-Acid and ceramic production-Sulfide determination-Iodometric method
TS 11134 Quartzite - used in refractory industry
TS 11135 Trakit - Used as a building and cladding stone
TS 11135 / T1 Trakit - Modification used as building and cladding stone 1
TS 11135 / tst T2 Trakit - Modification used as building and cladding stone 2
TS 11136 Bentonite - used in the ceramics industry
TS 11137 Limestone (limestone) - used as building and cladding stone
TS 11137 / T1 Limestone (limestone) - Modification used as a building and cladding stone 1
TS 11137 / tst T2 Limestone (limestone) - Modification used as a building and cladding stone 2
TS 11143 Travertine - used as building and cladding stone
TS 11143 / T1 Travertine - Modification used as building and cladding stone 1
TS 11143 / tst T2 Travertine - Modification used as building and cladding stone 2
TS 11145 Conglomerate - used as building and cladding stone
TS 11145 / T1 Conglomerate - Modification used as building and cladding stone 1
TS 11145 / T2 Conglomerate - used as building and cladding stone
TS 11145 / tst T2 Conglomerate - Modification used as building and cladding stone 2
TS 11258 used in Olivine-Refractory industry
TS 11259 Dolomite used as filler
TS 11325 Feldspar used in ceramics industry
TS 11326 Bentonite-Detergent used in industry
TS 11439 Diatomite-Used as abrasive
TS 11440 Sölestin - used in chemical industry
TS 11441 Bentonite - used in paper industry
TS 11442 Bentonite - used in tire industry
TS 11443 Onyx marble - Calcium carbonate based - Used as building and cladding stone
TS 11443 / T1 Onyx marble - Calcium carbonate based - Modification used as building and cladding stone 1
TS 11443 / tst T2 Onyx marble - Calcium carbonate based - Modification used as building and cladding stone 2
TS 11444 Dolomite - used as building and cladding stone
TS 11444 / T1 Dolomite - Modification used as building and cladding stone 1
TS 11444 / tst T2 Dolomite - Modification used as building and cladding stone 2
TS ISO 11459 Iron ores - Certified reference materials - Preparation and certification for use in chemical analysis
TS 11553 Syenite - used as building and cladding stone
TS 11553 / T1 XenUM-Modification used as a building and cladding stone 1
TS 11553 / tst T2 XenUM-Modification used as a building and cladding stone 2
TS 11652 Miner's safety lamp
TS ISO 11760 Coals - Classification
TS 11930 Diatomite - Used as filler
TSE ISO / TR 11945 Iron ores - Internationally traded iron ores analysis values
TS 12055 Charcoal briquettes - used in house warming
TS 12055 / T1 Charcoal briquettes - used in home heating
tst 12055 Coal briquettes - used in home heating
TS 12131 Sepiolite - used in the production of cat litter
TS EN 12370 Natural stones - Test methods - Determination of resistance to salt crystallization
TS EN 12371 Natural stones - Test methods - Determination of resistance to frost
TS EN 12372 Natural stones - Test methods - Determination of bending strength under heavy load
TS ISO 12740 Lead sulfide concentrates - Determination of gold and silver content - Flame smelting and flame atomic absorption spectrometric method using slag and cubalization
TSE ISO / TS 12902 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
TS 12986 Refractory mortars
TS ISO 13310 Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method
TS ISO 13311 Iron ores - Determination of lead content - Flame atomic absorption spectrometric method
TS EN 13373 Natural stones - Test methods - Determination of geometric properties of natural stone products
TS ISO 13545 Lead sulfur concentrates-Determination of lead content-Edta titrimetric method after acid cleavage
TS ISO 13658 Zinc sulfide concentrates-Determination of zinc content-Hydroxide precipitation and edta titrimetric method
TS ISO 13909-1 Coal and coke - Mechanical sampling - section 1: General introduction
TS ISO 13909-2 Coal and coke - Mechanical sampling - section 2: Coal - Sampling from moving material
TS ISO 13909-3 Coal and coke - Mechanical sampling - section 3: Coal - Sampling from stationary parties
TS ISO 13909-4 Coal and coke - Mechanical sampling - section 4: Coal - Preparation of test samples
TS ISO 13909-7 Quarry and coke - Mechanical sampling - Section 7: Methods for sampling, sample preparation and testing
TS ISO 13909-8 Coal and coke - Mechanical sampling - section 8: Test methods for systematic error determination
TS EN 14146 Natural stone test methods - Determination of dynamic elastic modulus (by measuring the basic resonance frequency)
TS EN 14147 Natural stones - Test methods - Determination of resistance to salt vapor deposition
TS EN 14157 Natural stone - Determination of abrasion resistance
TS EN 14158 Natural stone test methods - Determination of breaking energy
TS EN 14205 Natural stone test methods - Determination of knoop hardness
TS EN 14231 Natural stones - Test methods - Determination of slip resistance by using pendulum test equipment
TS ISO 14315 Sieves - Wire sieves used in industry - Technical specifications and tests
TS EN 14579 Natural stones - Test methods - Determination of sound velocity progression
TS EN 14580 Natural stones - Test methods - Determination of static elastic modulus
TS EN 14581 Natural stones - Test methods - Determination of linear thermal expansion coefficient
TSE ISO / TR 15855 Copper, lead and zinc sulphide concentrates - test procedures for testing fixed scales
TSE ISO / TR 15855 Copper, lead and zinc sulphide concentrates - test procedures for testing fixed scales