We are engaged in testing, inspection, inspection and certification services of all of the following standards. We are professional and experienced in all operations.
TS 4650-1 ISO 3597-1 Plastics-Glass fiber reinforced-Determination of mechanical properties of wick-reinforced resin rods-Part 1: General experiments and preparation of rods
TS 4650-2 ISO 3597-2 Plastics-Glass fiber reinforced-Determination of mechanical properties of wick-reinforced resin rods-Part 2: Determination of flexural strength
TS 4650-4 ISO 3597-4 Plastics-Glass fiber reinforced-Determination of mechanical properties of wick-reinforced resin rods section 4: Determination of apparent shear strength between laminates
TS EN ISO 12115 Plastics - Fiber reinforced - Thermosetting molding mixtures and prepregs - Determination of fluidity, consistency and shelf life
TS EN 12575 Plastics - Thermosetting molding compounds - Determination of moisture degree of fibers in smc
TS EN ISO 14125 Plastic composites - Fiber reinforced - Determination of bending properties
TS EN ISO 14129 Plastic composites - Fiber reinforced - Determination of in-plane shear stress / shear stress response - Including in-plane shear modulus and shear strength - Tensile test method of ± 45 °
TS EN ISO 14126 Fiber reinforced plastic composites - Determination of compression properties in the plane direction
TS EN ISO 7822 Textile - Glass reinforced plastics - Cavity content, glow loss, determination of mechanical dispersion and statistical counting methods
TS EN ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fiber reinforced plastic composites
TS EN 13473-1 Reinforcement materials - Characteristics of multi-axis, multi-ply fabrics - Part 1: Part 1: Indication
TS EN 13473-2 Reinforcement materials - Properties of multi-axis, multi-ply fabrics - Part 2: Test methods and general criteria
TS EN 13473-3 Reinforcement materials - Properties of multi-axis, multi-ply fabrics - Part 3: Special criteria
TS EN 40-7 Lighting poles - Part 7: Fiber properties reinforced with polymer composites in lighting poles
TS EN 13677-2 Reinforced thermoplastic molding pulps - Specifications for gmt - Part 2: General specifications and test methods
TS EN 13706-1 Reinforced plastic composites - Part 1: Marking
TS EN 13706-2 Reinforced plastic composites - Part 2: General specifications and test methods
TS EN 13706-3 Reinforced plastic composites - Part 3: Specific features
TS EN 14598-3 Reinforced thermoset pulps - Specification for sheet molding pulp (smc) and bulk molding pulp (bmc) - Part 3: Specific features
TS EN ISO 527-4 Plastics - Determination of tensile properties - Part 4: Isotropic and orthotropic fiber reinforced composites
TS EN ISO 14126 / AC Fiber reinforced plastic composites - Determination of compression properties in plane direction
TS EN ISO 14125 / AC Fiber reinforced plastic composites - Determination of bending properties
TS EN 13706-1 Reinforced plastic composites - Properties of extruded profiles - Part 1: Marking
TS EN ISO 14129 Plastic composites - Fiber reinforced - Determination of in-plane shear stress / shear dimensional change response - ± 45 degree tensile test method including in-plane shear stress / shear module
TS EN ISO 14126 Fiber reinforced plastic composites - Determination of compression properties in the in-plane direction
TS EN ISO 10352 Fiber reinforced plastics- Molding mixtures and prepregs- Determination of unit area mass
TS EN ISO 14125 / A1 Fiber reinforced plastic composites - Determination of bending properties
TS EN 16245-1 Fiber-reinforced plastic composite - Declaration of raw material properties - Part 1: General rules
TS EN 16245-4 Fiber-reinforced plastic composite - Declaration of raw material properties - Part 4: Specific requirements for products
TS EN 16245-2 Fiber reinforced plastic composite - Declaration of raw material properties - Part 2 - Specific requirements for resin, curing systems, additives and regulators
TS EN 16245-3 Fiber reinforced plastic composite - Declaration of raw material properties - Part 3: Special requirements for fiber
TS EN 16245-5 Fiber-reinforced plastic composite - Declaration of raw material properties - Part 5: special requirements for core materials
TS ISO 2558 Determination of the time of dissolution of the adhesive in styrene in glass mats made of glass fiber used for reinforcing plastics
TS EN 59 Glass fiber reinforced plastics - Determination of hardness by Barcol hardness tester
TS EN 40-7 Lighting poles - part 7: Requirements for fiber-reinforced polymer composite lighting poles
TS EN ISO 75-3Plastics- Determination of bending temperature under load- Part 3: High-strength thermoset laminates and long-fiber reinforced plastics
TS EN ISO 75-3 / AC Plastics - Determination of bending temperature under load - Part 3: High strength thermoset laminates and long-fiber reinforced plastics
TS EN ISO 527-5 Plastics - Determination of tensile properties - Part 5: Test requirements for one-way fiber-reinforced plastic composites
TS 1177 EN ISO 1172 Textile - Glass reinforced plastics - Prepregs, molding pulps and laminates - Textiles - Determination of glass and mineral filler content Calcination methods
TS ISO 1268-1 Fiber-reinforced plastics-Methods of preparing test plates-Part 1: General requirements
TS ISO 1268-2 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 2: Contact and injection molding
TS ISO 1268-3 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 3: Wet pressure molding
TS ISO 1268-4 Fiber-reinforced plastics-Methods of preparing test plates-Section 4: Molding of preformed mixtures.
TS ISO 1268-5 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 5: Filament winding
TS ISO 1268-6 Fiber-reinforced plastics-Methods of preparing test plates-Part 6: Extrusion molding by extrusion
TS ISO 1268-7 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 7: Resin transfer molding
TS ISO 1268-8 Fiber-reinforced plastics-Methods of preparing test plates-Section 8: Compression molding of smc and bmc
TS ISO 1268-9 Fiber reinforced plastics - Methods for preparing test plates: Section 9: Gmt / stc molding.
TS ISO 1268-10 Glass-fiber reinforced plastics-Methods of preparing test plates-Part 10: Injection molding of BMC and other long-fiber molding compounds-General principles and molding of multi-purpose test pieces
TS ISO 1268-11 Fiber-reinforced plastics-Methods of preparing test plates-Part 11: Injection molding of Bmc and other long-fiber molding compounds-Small plates
TS ISO 3597-3 Woven-Glass fiber-Reinforced plastics-Determination of mechanical properties of wick-reinforced resin rods-Part 3: Determination of compression strength
TS ISO 4899 Textile-Glass reinforced thermoset plastics-Properties and test methods
TS EN ISO 7822 Textiles - Determination of the void content of glass-reinforced plastics-Glow loss, mechanical separation and statistical counting methods
TS ISO 8605 Textile-Glass reinforced plastics - Sheet molding pulps (lkh) - Basis for specifications
TS EN ISO 10350-2: 2011 Plastics - Acquisition and reporting of comparable single point data - Part 2: Long fiber reinforced plastics
TS EN ISO 11667 Plastic fibers - Reinforced - Molding pulps and prepregs - Determination of resin, reinforced fibers and mineral fillers - Dissolving method
TS EN ISO 12114 Fiber reinforced plastics - Thermoset molding pastes and mixtures - Determination of curing properties
TS EN 12576 Plastics - Fiber reinforced composites - Preparation of test plates for smc, bmc and dmc by pressure molding
TS EN 13421 Plastics - Thermosetting molding mixtures - Composites and reinforcing fibers - Preparation of samples for the determination of anisotropic properties of compressed molding mixtures
TS EN 13677-1 Reinforced thermoplastic molding pulps - Specification for Gmt - Part 1: Indication
TS EN 13677-3 Reinforced thermoplastic molding pulps - Specifications for Gmt - Part 2: Specific features
TS EN 13706-2 Reinforced plastic composites - Properties of extruded profiles - Part 2: Test methods and general properties
TS EN 13706-3 Reinforced plastic composites - Properties of extruded profiles - Part 3: Specific features
TS EN ISO 14125 / AC Fiber reinforced plastic composites - Determination of bending properties
TS EN ISO 14125 Fiber reinforced plastic composites - Determination of bending properties
TS EN ISO 14130 Plastic composites - Fiber reinforced - Interlayer shear strength - Short beam method
TS EN 14447 Fiber reinforced plastics - Glass felt reinforced thermoplastics (gmt) - Determination of flowability and solidification
TS EN ISO 14529-1 Plastics - Melamine / phenolic powder molding mixtures (mp-Pmc) - Part 1: System and principles for marking properties
TS EN 14598-1 Reinforced thermosetting pulps - Specification for sheet molding pulp (smc) and bulk molding pulp (bmc) - Part 1: Marking
TS EN 14598-2 Reinforced thermoset pulps - Specification for sheet molding pulp (smc) and bulk molding pulp (bmc) - Part 2: General specifications and test method
TS EN 14598-2 / AC Reinforced thermosetting pulps - Specification for sheet molding pulp (smc) and bulk molding pulp (bmc) - Part 2: General requirements and test methods
TS EN ISO 15310 Fiber reinforced plastic composites-Determination of in-plane shear modulus with plate bending method