Test, inspection, inspection and certification services of all the following standards related to Termosetting Materials are provided by our company.
TS 2437 EN ISO 1110 (Formerly: TS 2437 ISO 1110) Accelerated conditioning of plastics-polyamides test pieces
TS 1966 ISO 35Natural rubber latex - Concentrate determination of mechanical stability
TS EN ISO 7808Plastics - Thermoset molding materials - Determination of transfer flow
TS EN ISO 10724-2 Plastics - Preparation of test pieces from powder thermoset molding mixtures (pmcs) by injection molding section 2: Small plates
TS EN ISO 11401Plastics - Phenolic resins - Separations by liquid chromatography
TS ISO 4433-1 Thermoplastic tubes - Resistance to chemical liquids - Classification - Part 1: Immersion test method
TS ISO 4433-2 Thermoplastic tubes - Resistance to chemical fluids - Classification - Part 2: Polyolefin tubes
TS EN ISO 14526-1 Plastics - Phenolic powder molding mixtures (pf-Pmc) - Part 1: Basis for marking system and properties
TS EN ISO 14526-2 Plastics - Phenolic powder molding mixtures (pf-Pmc) - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 14527-1 Plastics - Urea formaldehyde and urea / melamine - Formaldehyde powder molding mixtures (uf-ve f / mf-Pmc) - Part 1: System and principles of indication of properties
TS EN ISO 14527-2 Plastics - Urea - Formaldehyde and urea / melamine - Formaldehyde powder molding mixtures (UF- and UF / MF-PMC) - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 14527-3 Plastics - Urea / formaldehyde and urea / melamine - Formaldehyde powder molding mixtures (uf- and f / mf-Pmc) - Part 3: Properties of some molding mixtures
TS EN ISO 14529-3 Plastics- Melamine / phenolic powder molding mixtures- (mc-Pmc) - Part 3: Properties of some molding mixtures
TS 2366 EN ISO 2114 Plastics (polyester resins) - Paints and varnishes (binders) - Determination of partial acid value and total acid value
TS EN ISO 3672-2 Plastics - Unsaturated polyester resins (up-R) - Part 2: Preparation of test pieces and determination of their properties
TS EN ISO 10724-1 Plastics - Preparation of test pieces by injection molding from thermosetting molding mixtures in powder form - Part 1: General principles and molding of multi-purpose test pieces (iso 10724-1: 1998)
TS EN ISO 8974Plastics-Phenolic resins-Determination of phenol residue-Gas chromatographic method
TS EN ISO 3673-2 Plastics- Epoxy Resins - Part 2: Preparation of Test Samples and Determination of Crosslinked Epoxy Resins
TS EN 12090 Thermal insulation materials - For buildings - Determination of slip properties
TS EN ISO 4895 Plastics-Liquid epoxy resins-Determination of crystallization tendency
TS EN ISO 4895 Plastics-Liquid epoxy resins-Determination of crystallization tendency
TS 5258For unsaturated polyester resin-Fiber reinforced plastics
TS EN ISO 10724-1 Plastics - Preparation of test pieces by injection molding from thermoset powder molding mixtures - Part 1: General principles and molding of multi-purpose test pieces
TS EN ISO 295 Plastics - Thermoset materials - Preparation of test pieces by pressure molding
TS 448 EN ISO 60 Plastics - Determination of apparent density of materials that can be flowed from a particular funnel
TS 703 EN ISO 584 (Formerly: TS 703 ISO 584) Plastics-Unsaturated polyester resins Determination of reactivity at 80 ° C (classical method)
TS 703 ISO 584: 1997 / T1 (Number modification, TS 703 EN ISO 584) Plastics-Unsaturated polyester resins Determination of reactivity at 80 ° C (classical method)
TS 1677 EN ISO 308 Plastics - Phenolic molding materials - Determination of soluble substances in acetone (visible resin content of unmolded material)
TS 1724 ISO 1675: 1997 / T1 (Number modified, TS 1724 EN ISO 1675) Plastics liquid resins density determination-Pycnometer method
TS EN ISO 2114 / AC Plastics (polyester resins) - Paints and varnishes (binders) - Determination of partial acid value and total acid value
TS 2252 EN ISO 3001 Plastics-Epoxy compounds-Determination of epoxy equivalents
TS 2351 EN 1842Plastics-Thermoset molding pulp (smc-Bmc) determination of compression molding shrinkage
TS 2403 EN ISO 2554 Plastics - Unsaturated polyester resins - Determination of hydroxyl value
TS 2992 ISO 800Plastics - Phenolic molding materials - Specifications14.04.1999
TS EN ISO 3146 + AC Plastics - Determination of melting property (melting temperature or melting range) of semi-crystalline polymers
tst 3154 EN ISO 3671 Determination of volatile matter in plastics-aminoplastic molding materials
TS 3198 EN ISO 3521 Plastics - Unsaturated polyester and epoxy resins - Determination of total volume shrinkage
TS EN ISO 3671 Determination of volatile matter in plastics-Aminoplastic molding materials
TS EN ISO 4597-1 Plastics-Hardeners and accelerators for epoxy resins-Part 1: Marking
TS 6126 ISO 2555: 1998 / T1 (Number modification, TS 6126 EN ISO 2555) Plastics-Resins in liquid or emulsion or dispersed form
Plastics - Epoxy resins - Part 6723: Display with markings TS 3673 EN ISO 1-1 Plastics
TS 6955Polythetrafluorethylene coated in dry film form
TS 6995 EN ISO 3672-1 Plastics-Unsaturated polyester resins (up-R) section 1: System for indication of properties
TS EN ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for one-way fiber-reinforced plastic composites
TS 1177 EN ISO 1172 Textile - Glass reinforced plastics - Prepregs, molding pulps and laminates - Textiles - Determination of glass and mineral filler content Calcination methods
TS ISO 1268-1 Fiber-reinforced plastics-Methods of preparing test plates-Part 1: General requirements
TS ISO 1268-2 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 2: Contact and injection molding
TS ISO 1268-3 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 3: Wet pressure molding
TS ISO 1268-4 Fiber-reinforced plastics-Methods of preparing test plates-Section 4: Molding of preformed mixtures.
TS ISO 1268-5 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 5: Filament winding
TS ISO 1268-6 Fiber-reinforced plastics-Methods of preparing test plates-Part 6: Extrusion molding by extrusion
TS ISO 1268-7 Fiber-reinforced plastics-Methods for the preparation of test plates-Part 7: Resin transfer molding
TS ISO 1268-8 Fiber-reinforced plastics-Methods of preparing test plates-Section 8: Compression molding of smc and bmc
TS ISO 1268-9 Fiber reinforced plastics - Methods for preparing test plates: Section 9: Gmt / stc molding.
TS ISO 1268-10 Glass-fiber reinforced plastics-Methods of preparing test plates-Part 10: Injection molding of BMC and other long-fiber molding compounds-General principles and molding of multi-purpose test pieces
TS ISO 1268-11 Fiber-reinforced plastics-Methods of preparing test plates-Part 11: Injection molding of Bmc and other long-fiber molding compounds-Small plates
TS ISO 3597-3 Woven-Glass fiber-Reinforced plastics-Determination of mechanical properties of wick-reinforced resin rods-Part 3: Determination of compression strength
TS ISO 4899 Textile-Glass reinforced thermoset plastics-Properties and test methods
TS EN ISO 7822 Textiles - Determination of the void content of glass-reinforced plastics-Glow loss, mechanical separation and statistical counting methods
TS ISO 8605 Textile-Glass reinforced plastics - Sheet molding pulps (lkh) - Basis for specifications
TS EN ISO 10350-2: 2011 Plastics - Acquisition and reporting of comparable single point data - Part 2: Long fiber reinforced plastics
TS EN ISO 11667Plastic fiber - Reinforced - Molding pulp and prepreg - Determination of resin, reinforced fiber and mineral filler - Dissolution method
TS EN ISO 12114Fiber reinforced plastics - Thermosetting molding doughs and mixtures - Determination of curing properties
TS EN 12576 Plastics - Fiber reinforced composites - Preparation of test plates for smc, bmc and dmc by pressure molding
TS EN 13421 Plastics - Thermosetting molding mixtures - Composites and reinforcing fibers - Preparation of samples for the determination of anisotropic properties of compressed molding mixtures
TS EN 13677-1 Reinforced thermoplastic molding pulps - Specification for Gmt - Part 1: Indication
TS EN 13677-3 Reinforced thermoplastic molding pulps - Specifications for Gmt - Part 2: Specific features
TS EN 13706-2 Reinforced plastic composites - Properties of extruded profiles - Part 2: Test methods and general properties
TS EN 13706-3 Reinforced plastic composites - Properties of extruded profiles - Part 3: Specific features
TS EN ISO 14125 / AC Fiber reinforced plastic composites - Determination of bending properties
TS EN ISO 14125Fiber reinforced plastic composites - Determination of flexural properties
TS EN ISO 14130Plastic composites - Fiber reinforced - Shear strength between layers - Short beam method
TS EN 1444 Fiber reinforced plastics - Glass felt reinforced thermoplastics (gmt) - Determination of fluidization and solidification
TS EN ISO 14529-1 Plastics - Melamine / phenolic powder molding mixtures (mp-Pmc) - Part 1: System and principles for marking properties
TS EN 14598-1 Reinforced thermosetting pulps - Specification for sheet molding pulp (smc) and bulk molding pulp (bmc) - Part 1: Marking
TS EN 14598-2 Reinforced thermoset dough - Properties for sheet molding pulp (smc) and bulk molding pulp (bmc) - Part 2: General properties and test method
TS EN 14598-2 / AC Reinforced thermosetting pulps - Specification for sheet molding pulp (smc) and bulk molding pulp (bmc) - Part 2: General requirements and test methods
TS EN ISO 15310 Fiber reinforced plastic composites - Determination of in-plane shear modulus by plate twist