We provide testing, inspection, inspection and certification services of all the following standards. We are professional and experienced in all operations.
Plastics - Ethylene / vinylacetate (e / vac) molding and extruding agents TS EN ISO 4613-2 section 2: Preparation of test specimens and determination of their properties
TS EN ISO 4613-1 (Formerly: TS ISO 4613-1) Plastics-Ethylene / vinyl acetate (e / vac) molding and extruding agents-Part 1: Indication and identification with markings
TS 1006-1 ISO 182-1 Determination of the tendency of plastic vinyl vinyl chloride homopolymers and copolymers to produce hydrogen chloride and other acidic products at high temperatures - Part 1: Congo red method
TS 1006-4 EN ISO 182-4 (Formerly: TS 1006-4 ISO 182-4) Determination of the tendency to release hydrogen chloride and other acidic products of plastics-based homopolymers and copolymers of vinyl-based pulp and products at high temperatures-
TS 1006-2 EN ISO 182-2 (Formerly: TS 1006-2 ISO 182-2) Determination of the tendency to release hydrogen chloride and other acidic products of plastics based on vinyl chloride homopolymers and copolymers of pulps and products at high temperatures-Part 2:
TS 1006-3 EN ISO 182-3 (Former no: TS 1006-3 ISO 182-3) Determination of the tendency of release of hydrogen chloride and other acidic products of plastics based on vinylchloride homopolymers and copolymers of pulps and products at high temperatures - Part XtUMX method
TS 6993 ISO 6188 Plastics-Poly (alkylene terephthalate) granules-Determination of water percentage
TS 681 ISO 599 Plastics-Polyamide homopolymers-Determination of extractables with boiling methanol
TS 2437 EN ISO 1110 (Formerly: TS 2437 ISO 1110) Accelerated conditioning of plastics-polyamides test pieces
TS ISO 14663-1 Plastics - Ethylene / vinyl alcohol (evoh) copolymer molding and extruding agents - Part 1: System and principles for marking properties
TS ISO 14663-2 Plastics - Ethylene / vinyl alcohol (evoh) copolymer molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS 8931 EN ISO 1873-1 Plastics-Polypropylene (pp) molding and extrusion materials-Part 1: Principles for marking system and features
TS EN ISO 11542-1 Plastics - Very high molecular weight polyethylene (pe-Uhmw) molding and extrusion materials - Part 1: Features system and principles
TS 1676 EN ISO 305 Plastics - Determination of the thermal stability of polyvinylchloride, chlorine-containing homopolymers and copolymers and their pulp - Method of color decay
TS 1973 EN ISO 1600 Plastics - Cellulose acetate - Determination of light absorption of test specimens prepared by molding using different heating times
TS EN ISO 2580-2 Plastics - Acrylonitrile-Butadiene-Styrene (abs) molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 8257-2 Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 2580-2 Plastics-Acrylonitrile / butadiene / styrene (abs) molding and extrusion materials-Test methods
TS EN ISO 4610 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis with air-jet screening device
TS EN ISO 7391-1 Plastics - Polycarbonate (pc) molding and extrusion materials - Part 1: System and principles of marking features
TS EN ISO 7391-2 Plastics - Polycarbonate (pc) - Molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 9988-1 Plastics - Polyoxymethylene (pom) molding and extruding agents - Part 1: Guidelines for marking system and features
TS EN ISO 15023-2 Plastics - Poly (vinyl alcohol) (pval) materials - Part 2: Specification
TS ISO 9988-2 Plastics - Polyoxymethylene (pom) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 307 Plastics- Polyamides- Determination of viscosity number
TS EN ISO 15103-2 Plastics - Poly (phenylene ether) (PPE) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 12086-1 / AC Plastics - Molding and extrusion materials with fluoropolymer dispersions - Part 1: System and principles of marking features
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled components from polypropylene (pp)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled components from polypropylene (pp)
TS EN ISO 10350-1 Plastics - Accumulation and presentation of comparable single note data section 1: Molding materials
TS EN ISO 8986-1 Plastics - Polybutene (pb) molding and extrusion materials - Part 1: System and principles of marking features
TS EN 15860 Plastics - Thermoplastic semi-finished products for processing - Specification and test methods
TS EN ISO 9012 Gas welding device-Air suction hand torches-Features and tests
TS EN ISO 1133-1 Plastics - Determination of the mass flow rate (mfr) and volumetric flow rate (mfr) of molten thermoplastics - Part 1: Standard method
TS EN ISO 1133-2 Plastics - Determination of the mass flow rate (mfr) and volumetric flow rate (mvr) of molten thermoplastics - Part 2: Method for time-temperature history and / or moisture sensitive materials
TS EN ISO 1622-1 Plastics-Polystyrene (PS) molding and extrusion materials-Part 1: Marking system and basic features
TS EN ISO 294-5Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 5: Preparation of standard samples for anisotropy investigation
TS EN ISO 1874-2 Plastics - Polyamide (pa) molding and extrusion materials part 2: Preparation of test pieces and determination of their properties
Plastics - Polyamides - Determination of viscosity number TS EN ISO 307: 2007 / A1: 2013
TS EN ISO 14910-1: 2013 Plastics - Thermoplastic polyester / ester and polyether / ester elastomers for molding and extrusion - Part 1: System and principles for marking properties
TS EN ISO 14910-2: 2013 Plastics - Thermoplastic polyester / ester and polyether / ester elastomers for molding and extrusion - Part 2: Preparation of test specimens and determination of properties
TS EN 15342 Plastics - Recycled plastics - Characterization of recycled materials from polystyrene (PS)
TS EN 15343 Plastics - Recycled plastics - Plastic recycling traceability and conformity assessment and recycled content
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled materials from polyethylene (PE)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled materials from polypropylene (PP)
TS EN 15346 Plastics - Recycled plastics - Characterization of poly (vinylchloride) (PVC) recycled materials
TS EN ISO 306 Plastics-Thermoplastic materials-Determination of Vicat softening temperature (VST)
TS EN ISO 1133-1 tires - Determination of mass flow rate (mfr) and volumetric flow rate (mfr) of molten thermoplastics
TS EN ISO 1133-2 Plastics - Determination of the mass flow rate (MFR) and volumetric flow rate (MVR) of molten thermoplastics - Part 2: Method for time-temperature history and / or moisture sensitive materials
TS 6127 EN ISO 4612 Preparation of pastry for plastics-PVC resins
TS EN ISO 17855-1 Plastics - Polyethylene (PE) molding and extrusion materials - Part 1: Description system and basic technical characteristics
TS EN ISO 19066-1 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) molding and extrusion materials - Part 1: Description system and technical characteristics
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled components from polyethylene (pe)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled components from polypropylene (pp)
TS EN ISO 9012Gas welding device-Air suction hand torches-Features and tests
TSE K 329 Multi-layer roof and facade cladding - For buildings - Hard plastic - Definitions, requirements and test methods
TS EN 15346 Plastics - Recycled plastics - Characterization of recycled components from poly (vinyl chloride)
TS EN 15348 Plastics - Recycled plastics - Characterization of recycled components from poly (ethylene terephthalate)
TS EN ISO 18064Termoplastic elastomers - Terms and abbreviations
TS EN ISO 19065-1 Plastics - Acrylonitrile Styrene Acrylate (ASA), Acrylonitrile (ethylene, propylene, diene) Styrene (AEPDS) and acrylonitrile (chlorinated polyethylene) styrene (ACS) casting and extrusion materials - Part 1: Marking system and basic features
TS EN ISO 306 Plastics - Thermoplastic substances - Determination of Vicat softening temperature (VST)
TS EN ISO 16396-1 Plastics - Polyamide (pa) molding and extrusion materials - Part 1: Display system, marking of products and principles for properties
TS EN ISO 19069-1 Plastics-Polypropylene (pp) molding and extrusion materials-Part 1: Principles for marking system and features
TS EN ISO 1628-5 Plastics - Determination of viscosity in dilute solutions of polymers using capillary viscometers - Part 5: Thermoplastic polyester (tp) homopolymers and copolymers
TS EN ISO 9988-2 Plastics - Polyoxymethylene (pom) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS ISO 12000 Plastics / rubber - Polymer dispersions and rubber latexes (natural and synthetic) - Definitions and examination of test methods
TS EN ISO 19062-1 Plastics - Acrylonitrile-Butadiene-Styrene (abs) molding and extrusion materials - Part 1: Guidelines for marking system and properties
TS EN ISO 19064-1 Plastics - Styrene / acrylonitrile (SAN) molding and extrusion materials - Part 1: System and principles for marking properties
TS EN ISO 19063-1 Plastics - Impact-resistant polystyrene (PS-I) molding and extrusion materials - Part 1: The basics on which marking system and features are based
TS EN ISO 17855-2 Plastics - Polyethylene (PE) molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties (ISO 17855-2: 2016)
TS EN ISO 19069-2 Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties (ISO 19069-2: 2016)
TS EN ISO 25137-1 Plastics - Sulfon polymer molding and extrusion materials - Part 1: Identification system and the basis of specifications
TS EN ISO 25137-2 Plastics - Sulfon polymer molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 16396-2 Plastics - Polyamide (pa) molding and extrusion materials part 2: Preparation of test pieces and determination of their properties
TS EN ISO 20028-1 Plastics - Thermoplastic polyester (tp) molding and extrusion materials - Part 1: Basics for marking system and features
TS EN ISO 20028-2 Plastics - Thermoplastic polyester (tp) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 293 Plastics - Preparation of test pieces from thermoplastic materials by pressure molding
TS EN ISO 294-2 / A1 Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 2: Small draw bars
TS EN ISO 294-1 / A1 Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 1: General principles and molding of multi-purpose rod test pieces
TS EN ISO 294-3Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 3: Small plates
TS EN ISO 294-4 Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 4: Determination of shrinkage in mold
TS EN 477 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of impact strength in main profiles - Mass reduction method
TS EN 478 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors, appearance after exposure to 150 c - Test method
TS EN 479 Non-plasticizing polyvinyl chloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of permanent thermal elongation
TS EN 514 Non-plasticizing polyvinylchloride (pvc-U) profiles used in window and door manufacturing- Determination of strength of welded corners and t-joints
TS 1006-2 ISO 182-2: 1997 / T1 (Number modification, TS 1006-2 EN ISO 182-2) Plastics are based on vinylchloride homopolymers and copolymers of pulps and products at high temperatures. : Ph method
TS 1006-3 ISO 182-3: 1997 / T1 (Number modification, TS 1006-3 EN ISO 182-3) Plastics are based on vinylchloride homopolymers and copolymers of pulps and products at high temperatures. : Conductometric method
TS 1006-4 ISO 182-4: 1997 / T1 (Number modification, TS 1006-4 EN ISO 182-4) Plastics-Vinylchloride homopolymers and copolymers based on the release of hydrogen chloride and other acidic products at high temperatures. 4: Potentiometric method
TS 1116 EN ISO 1158 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content14.04.1999
TS 1149-1 EN ISO 294-1Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 1: General principles and molding of multi-purpose rod test pieces
TS 1149-2 EN ISO 294-2Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 2: Small draw bars
TS 1178 EN ISO 1163-1 Plastics-poly (vinyl chloride) (pvc-U) molding and extrusion materials with no plasticizer-Part 1: System and principles for marking properties
TS EN ISO 1265Plastics-Polyvinylchloride (pvc) resins-Determination of impurities and foreign particles
TS EN ISO 1269 Plastics - Vinyl chloride homopolymer and copolymer resins - Determination of volatile matter (including water)
TS 1623 ISO 1061: 1997 / T1 (Number modification, TS 1623 EN ISO 1061) Determination of free acidity of cellulose acetate without plasticizer
TS EN ISO 1624Plastics - Homopolymer and copolymer resins of vinyl chloride - Aqueous screen analysis
TS EN ISO 1628-2 Plastics - Determination of polymer viscosity - In dilute solutions - Capillary viscometer method - Part 2: Polyvinyl chloride resins
TS ISO 1628-5 Determination of viscosity in dilute solutions of polymers using capillary viscometers-Part 5: Thermoplastic polyester (tp) homopolymers and copolymers
TS EN ISO 1628-3 Plastics-Determination of viscosity and limit viscosity-Part 3: Polyethylenes and polypropylenes
TS 1768 EN ISO 1264 Plastics-Homopolymer and copolymer resins of vinyl chloride-Determination of pH in aqueous extracts
TS EN 1778 Characteristic values for welded thermoplastic structures - Modules for thermoplastic equipment design and determination of permissible stresses
TS 1801 EN ISO 1060-1 Plastics-Homopolymer and copolymer resins of vinyl chloride-Part 1: System and principles for marking properties
TS 1853 EN ISO 1597 Plastics -Plasticizing cellulose acetate - Determination of acetic acid yield
TS 1877 EN ISO 1598 Plastics - Cellulose acetate - Determination of insoluble particles
TS 2437 ISO 1110: 1997 / T1 (Number modification, TS 2437 EN ISO 1110) Accelerated conditioning of plastics-polyamides test pieces
TS ISO 2561 Plastics-Determination of styrene monomer residue in polystyrene by gas chromatography
TS EN ISO 2897-2 Plastics-Impact-resistant polystyrene (ps-I) molding and extrusion materials-Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 2898-2 Plastics -Plasticizing poly (vinyl chloride) (pvc-P) molding and extrusion materials-Part 2: Preparation of test specimens and determination of properties
TS 3155 EN ISO 4608 Plastics - Vinyl chloride homopolymer and copolymer resins - General purpose - Determination of plasticizer absorption at room temperature
TS EN ISO 3451-5 Plastics-Determination of ash part 5: Polyvinylchloride
Plastics-Vinyl chloride (pvc-P) homopolymer and copolymer compounds -Plasticized-Section 4410: Indication by markings TS 2898 EN ISO 1-4410 (Former number: TS 2898 ISO 1-1)
TS 4410 ISO 2898-1: 1997 / T1 (Number modification, TS 4410 EN ISO 2898-1) Plastics - Vinyl chloride (pvc-P) homopolymer and copolymer compounds - Plasticized - Part 1: Indication by signs
TS EN ISO 4577 Plastics - Polypropylene and propylene copolymers - Determination of resistance to oxidation in hot air - Oven method
TS ISO 4581 Plastics-Styrene / acrylonitrile copolymers-Determination of residual acrylonitrile monomer content-Gas chromatography method
TS ISO 4613-1: 1996 / T1 (Number amendment, TS EN ISO 4613-1) Plastics-Ethylene / vinyl acetate (e / vac) molding and extrusion materials-Part 1: Indication and identification with markings
Plastics-Ethylene / vinylacetate (e / vac) molding and extruding agents TS EN ISO 4613-2 / A1 section 2: Preparation of test specimens and determination of their properties
TS 6391 EN ISO 1060-2 Plastics-Homopolymer and copolymer resins of vinyl chloride-Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 6401Plastics-Vinyl chloride homopolymer and copolymer resins-Determination of vinyl chloride monomer residue-Gas chromatographic method
TS EN ISO 6402-1 Plastics - Impact-resistant, acrylonitrile / styrene (asa, aes, acs) based molding and extrusion materials (except those modified with butadiene) section 1: Indication of properties and property criteria
TS EN ISO 6402-2 Plastics - Impact resistant, acrylonitrile / styrene (asa, acs) type molding and extrusion materials - except for butadiene modified materials - Part 2: Preparation of test pieces and determination of their properties
TS 6689 EN ISO 1599 Plastics-Cellulose acetate-Determination of viscosity loss during molding
TS ISO 6691 Thermoplastic polymers for plain bearings - Classification and designation
TS 7639 ISO 3451-2 Plastics-Determination of ash-Part 2: Polyalkylene terephthalates
TS 7736 EN ISO 3451-4 Plastics - Determination of ash - Part 4: Polyamides
TS 7901 EN ISO 1622-2 Plastics - Polystyrene (ps) molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS 8105 ISO 1628-4 Plastics-Determination of the viscosity of dilute polymer solutions using capillary viscometers-Part 4: Polycarbonate (pc) molding and extrusion materials
Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 8257: System and principles of marking features
Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 8257: System and principles of marking features
TS ISO 8257-2 / T1 (Number modification: TS EN ISO 8257-2) Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 8985Plastics - Ethylene / vinyl acetate copolymer (evac) - Thermoplastics - Determination of vinyl acetate content
tst EN ISO 8986-2 Plastics - Polybutene (pb) molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS EN ISO 8986-2 Plastics - Polybutene (pb) molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS EN ISO 10366-2 Plastics - Methyl methacrylate / acrylonitrile / butadiene / styrene (mabs) type molding and extrusion materials part 2: Preparation of test pieces and determination of properties
TS EN ISO 10601 Plastics - Homopolymer and copolymer resins of vinyl chloride Chapter 1: Short demonstration system and principle of properties
TS EN ISO 11337: 2010 Plastics - Polyamides - Determination of caprolactam and w-laurolactam by gas chromatography
TS EN ISO 11468Plastics- Preparation of PVC dough for test purposes - Thawing method
TS EN ISO 11542-2 Plastics - Molding and extrusion materials - Very high molar polyethylene (pe-Uhmw) - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 11542-2 / AC Plastics - Molding and extrusion materials - Very high molar mass polyethylene (pe-Uhmw) - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 12086-1 Plastics - Molding and extrusion materials with fluoropolymer dispersions - Part 1: System and principles of marking features
TS EN ISO 12086-2 Plastics - Fluoropolymer dispersions and molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 12086-2 / AC Plastics - Fluoropolymer dispersions and molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS EN 12118 Plastic pipe systems - Determination of moisture content in thermoplastics by coulometry method
TS EN ISO 14663-1 Plastics - Ethylene / vinyl alcohol (evoh) copolymer molding and extruding agents - Part 1: Principles and marking system for specifications
TS EN ISO 14663-2 Plastics- Ethylene / vinyl alcohol (evoh) copolymer molding and extrusion materials- Part 2: Preparation of test pieces and determination of their properties
TS EN 15342 Plastics - Recycled plastics - Characterization of recycled components from polystyrene (ps)
TS EN 15343 Plastics - Recycled plastics - Traceability of plastic recovery, conformity assessment and recovery content
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled components from polyethylene (pe)
TS EN ISO 15526-2 Plastics - Polyketon (pk) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS ISO 15853 Thermoplastic materials-Preparation of tubular test pieces for the determination of hydrostatic strength of materials used in injection molding
TS EN ISO 28941-1 Plastics-Poly (phenylene ether) (PPE) molding and extrusion materials-Part 1: Basics for short demonstration systems and features