The standards required for the process from production to sale within the scope of plastics are as follows. We provide testing, inspection, inspection and certification services for all of the following standards.
Plastics - Ethylene / vinylacetate (e / vac) molding and extruding agents TS EN ISO 4613-2 section 2: Preparation of test specimens and determination of their properties
TS EN ISO 4613-1 (Formerly: TS ISO 4613-1) Plastics-Ethylene / vinyl acetate (e / vac) molding and extruding agents-Part 1: Indication and identification with markings
TS 1006-1 ISO 182-1 Determination of the tendency of plastic vinyl vinyl chloride homopolymers and copolymers to produce hydrogen chloride and other acidic products at high temperatures - Part 1: Congo red method
TS 1006-4 EN ISO 182-4 (Formerly: TS 1006-4 ISO 182-4) Determination of the tendency to release hydrogen chloride and other acidic products of plastics-based homopolymers and copolymers of vinyl-based pulp and products at high temperatures-
TS 1006-2 EN ISO 182-2 (Formerly: TS 1006-2 ISO 182-2) Determination of the tendency to release hydrogen chloride and other acidic products of plastics based on vinyl chloride homopolymers and copolymers of pulps and products at high temperatures-Part 2:
TS 1006-3 EN ISO 182-3 (Former no: TS 1006-3 ISO 182-3) Determination of the tendency of release of hydrogen chloride and other acidic products of plastics based on vinylchloride homopolymers and copolymers of pulps and products at high temperatures - Part XtUMX method
TS 6993 ISO 6188 Plastics-Poly (alkylene terephthalate) granules-Determination of water percentage
TS EN ISO 13468-1Plastics - Determination of the total light transmittance of transparent materials - Part 1: Single beam beam device
TS 681 ISO 599Plastics-Polyamide homopolymers-Determination of extractables with boiling methanol
TS 2437 EN ISO 1110 (Formerly: TS 2437 ISO 1110) Accelerated conditioning of plastics-polyamides test pieces
TS 2437 EN ISO 1110 (Formerly: TS 2437 ISO 1110) Accelerated conditioning of plastics-polyamides test pieces
TS 1724 EN ISO 1675 (Former number: TS 1724 ISO 1675) Plastics, liquid resins density determination-Pyknometer method
TS 1966 ISO 35Natural rubber latex - Concentrate determination of mechanical stability
TS 5773 EN ISO 13758 Liquefied petroleum gases - Determination of propane dryness - Valve freezing method
TS 3779 EN ISO 2818 Plastics - Preparation of test pieces by machining
TS EN ISO 7808Plastics - Thermoset molding materials - Determination of transfer flow
TS EN ISO 2578Plastics - Time - Determination of temperature limits - After prolonged exposure to heat
TS EN ISO 10093Plastics - Fire tests - Standard ignition sources
TS EN ISO 10724-2 Plastics - Preparation of test pieces from powder thermoset molding mixtures (pmcs) by injection molding section 2: Small plates
TS EN ISO 11401Plastics - Phenolic resins - Separations by liquid chromatography
TS ISO 14663-1 Plastics - Ethylene / vinyl alcohol (evoh) copolymer molding and extruding agents - Part 1: System and principles for marking properties
TS ISO 14663-2 Plastics - Ethylene / vinyl alcohol (evoh) copolymer molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS ISO 4433-1 Thermoplastic tubes - Resistance to chemical liquids - Classification - Part 1: Immersion test method
TS ISO 4433-2 Thermoplastic tubes - Resistance to chemical fluids - Classification - Part 2: Polyolefin tubes
TS EN ISO 14526-1 Plastics - Phenolic powder molding mixtures (pf-Pmc) - Part 1: Basis for marking system and properties
TS EN ISO 14526-2 Plastics - Phenolic powder molding mixtures (pf-Pmc) - Part 2: Preparation of test specimens and determination of their properties
TS 8931 EN ISO 1873-1 Plastics-Polypropylene (pp) molding and extrusion materials-Part 1: Principles for marking system and features
TS EN ISO 13468-2 Plastics - Determination of the total light transmittance of transparent materials - part 2: Double beam path device
TS EN 1122 Plastics - Determination of cadmium - Wet cracking method
TS EN ISO 10093Plastics - Fire tests - Standard ignition sources
TS ISO 10840 Plastics - Application guide for standard fire tests
TS EN ISO 14527-1 Plastics - Urea formaldehyde and urea / melamine - Formaldehyde powder molding mixtures (uf-ve f / mf-Pmc) - Part 1: System and principles of indication of properties
TS EN ISO 14527-2 Plastics - Urea - Formaldehyde and urea / melamine - Formaldehyde powder molding mixtures (UF- and UF / MF-PMC) - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 14527-3 Plastics - Urea / formaldehyde and urea / melamine - Formaldehyde powder molding mixtures (uf- and f / mf-Pmc) - Part 3: Properties of some molding mixtures
TS EN ISO 14529-3 Plastics- Melamine / phenolic powder molding mixtures- (mc-Pmc) - Part 3: Properties of some molding mixtures
TS 2366 EN ISO 2114 Plastics (polyester resins) - Paints and varnishes (binders) - Determination of partial acid value and total acid value
TS EN ISO 3672-2 Plastics - Unsaturated polyester resins (up-R) - Part 2: Preparation of test pieces and determination of their properties
TS EN ISO 10724-1 Plastics - Preparation of test pieces by injection molding from thermosetting molding mixtures in powder form - Part 1: General principles and molding of multi-purpose test pieces (iso 10724-1: 1998)
TS EN ISO 11542-1 Plastics - Very high molecular weight polyethylene (pe-Uhmw) molding and extrusion materials - Part 1: Features system and principles
TS EN ISO 1183-3 Plastics-Non-porous plastics-Density determination methods-Part 3: Gas pycnometer method
TS 1676 EN ISO 305 Plastics - Determination of the thermal stability of polyvinylchloride, chlorine-containing homopolymers and copolymers and their pulp - Method of color decay
TS 1973 EN ISO 1600 Plastics - Cellulose acetate - Determination of light absorption of test specimens prepared by molding using different heating times
TS EN ISO 2580-2 Plastics - Acrylonitrile-Butadiene-Styrene (abs) molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS 1854 ISO 1875 plastics - Plasticizer-added cellulose acetate - Determination of the amount of substance that can be extracted with diethyl ether
TS 8241 ISO 8660 Plastics - Determination of permanganate absorption number of caprolactam - Spectrometric method
TS EN ISO 8257-2 Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN 14233 Food contact materials and articles - Plastics - Determination of the transition temperature in food and plastic encounter during microwave and conventional oven heating
TS EN ISO 12058-1-plastics - Determination of viscosity using ball-drop viscometer - Part 1: Slope pipe method
TS EN ISO 179-2 Plastics-Determination of Charpy Impact Properties-Part 2: Instrument Impact Test
TS EN 1122 Plastics - Determination of cadmium - Wet shredding method
Plastics - Non-porous plastics - Density determination methods - Part 1183: Gradient density column method TS EN ISO 2-2 Plastics
TS EN ISO 1183-3 Plastics-Non-porous plastics-Density determination-Part 3: Gas pycnometer method
TS EN ISO 2580-2 Plastics-Acrylonitrile / butadiene / styrene (abs) molding and extrusion materials-Test methods
TS EN ISO 846 Plastics - Evaluation of the effect of microorganisms (technical committee stage)
TS EN ISO 4610 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis with air-jet screening device
TS EN ISO 4892-1 Plastics-Methods of exposure to laboratory light sources-Section 1: General rules
TS EN ISO 8256 Plastics- Determination of tensile-impact strength 08.03.2006 83.080.01
TS EN ISO 8974 Plastics-Phenolic resins-Determination of phenol residue-Gas chromatographic method
TS EN ISO 7391-1 Plastics - Polycarbonate (pc) molding and extrusion materials - Part 1: System and principles of marking features
TS EN ISO 7391-2 Plastics - Polycarbonate (pc) - Molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 9988-1 Plastics - Polyoxymethylene (pom) molding and extruding agents - Part 1: Guidelines for marking system and features
TS EN ISO 13468-2 Plastics - Determination of the total light transmittance of transparent materials - Part 2: Double beam path device
TS EN ISO 15023-2 Plastics - Poly (vinyl alcohol) (pval) materials - Part 2: Specification
S EN ISO 22088-2 Plastics - Determination of resistance to environmental stress cracking - Part 2: Constant tensile load method
TS EN ISO 22088-3 Plastics - Determination of resistance to environmental stress cracking - Part 3: Twisted strip method
TS EN ISO 22088-4 Plastics - Determination of resistance to environmental stress cracking - Part 4: Ball or needle clamping method
TS ISO 9988-2 Plastics - Polyoxymethylene (pom) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 307 Plastics- Polyamides- Determination of viscosity number
TS EN ISO 15103-2 Plastics - Poly (phenylene ether) (PPE) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 12086-1 / AC Plastics - Molding and extrusion materials with fluoropolymer dispersions - Part 1: System and principles of marking features
TS EN ISO 3251Paints, varnishes and plastics - Determination of non-volatile substances
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled components from polypropylene (pp)
TS EN 15347 Plastics - Recycled plastics - Characterization of plastic waste
TS EN 15347 Plastics - Recycled plastics - Characterization of plastic waste
TS EN ISO 291 Plastics - Standard atmospheric conditions for conditioning and testing
TS EN ISO 10350-1 Plastics - Accumulation and presentation of comparable single note data section 1: Molding materials
TS EN ISO 8986-1 Plastics - Polybutene (pb) molding and extrusion materials - Part 1: System and principles of marking features
TS EN ISO 12162 Thermoplastic materials - For pipes and fittings used in pressure-applied situations - Classification and marking - Total service coefficient
TS EN 15860 Plastics - Thermoplastic semi-finished products for processing - Specification and test methods
TS EN ISO 3251 Paints, varnishes and plastics - Determination of non-volatile matter content
TS EN ISO 4611 Plastics - Determination of the effect of hot and humid environment, sprayed water and salt mist.
TS EN ISO 178 Plastics-Determination of flexural properties
TS EN ISO 877-2 Plastics - Methods of exposure to daylight - Part 2: Leaving directly behind sunlight and window glass
TS EN ISO 877-1Plastics - Methods of exposure to sunlight - Part 1: General rules
TS EN ISO 877-3Plastics - Methods of exposure to sunlight - Part 3: Intensified sunlight
TS EN ISO 10927 Plastics - Determination of molecular mass and molecular mass distribution of polymer species by matrix assisted laser desorsion / ionization flight / transition time mass spectrometry (Maldi-Tofms)
TS EN ISO 9012Gas welding device-Air suction hand torches-Features and tests
TS EN ISO 527-2Plastics-Determination of tensile properties-Part 2: Test conditions for molding and extrusion plastics
TS EN ISO 527-1Plastics-Determination of tensile properties-Part 1: General principles
TS EN ISO 1133-1 Plastics - Determination of the mass flow rate (mfr) and volumetric flow rate (mfr) of molten thermoplastics - Part 1: Standard method
TS EN ISO 1133-2 Plastics - Determination of the mass flow rate (mfr) and volumetric flow rate (mvr) of molten thermoplastics - Part 2: Method for time-temperature history and / or moisture sensitive materials
TS EN ISO 1622-1 Plastics-Polystyrene (PS) molding and extrusion materials-Part 1: Marking system and basic features
TS EN ISO 179-2 / A1 Plastics-Determination of Charpy impact properties-Part 2: Impact test with measuring instrument-Modification 1: Accuracy data
TS EN ISO 1043-1 Plastics-Symbols and abbreviated terms-Part 1: Main polymers and their special characteristics
TS EN ISO 1043-2 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
TS EN ISO 22007-4 Plastics-Determination of thermal conductivity and thermal diffusivity-Part 4: Laser flash method
TS EN ISO 22007-3 Plastics-Determination of thermal conductivity and thermal diffusivity-Part 3: Temperature wave analysis method
TS EN ISO 22007-1 Plastics-Determination of thermal conductivity and thermal diffusion-Part 1: General rules
TS EN ISO 1043-1 Plastics - Symbols and abbreviated terms - Part 1: Main polymers and their special characteristics
TS EN ISO 1043-2 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
TS EN ISO 4892-2 Plastics-Methods of exposure to laboratory light sources-Section 2: Xenon arc lamp
Determination of maximum aerobic biodegradability of plastics under controlled composting conditions - Method of analysis of released carbon dioxide - Part 14855: General method (ISO 1-1: 14855) TS EN ISO 1-2012
TS EN ISO 14855-2 Determination of maximum aerobic biodegradability of plastic materials under controlled composting conditions - Method of analysis of released carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide released in laboratory-level experiment
TS EN ISO 17556Plastics - Determination of the maximum aerobic biodegradability of plastic materials in soil by measuring oxygen demand or the amount of carbon dioxide released by the respirometer
TS EN ISO 294-5Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 5: Preparation of standard samples for anisotropy investigation
TS EN ISO 1628-1: 2009 / A1 Plastics-Determination of the fluidity of polymers in diluted solutions by capillary viscometer-Part 1: General principles
TS EN ISO 3673-2 Plastics- Epoxy Resins - Part 2: Preparation of Test Samples and Determination of Crosslinked Epoxy Resins
TS EN ISO 16014-5 Plastics - Determination of Molecular Mass and Average Molecular Mass Distribution of Polymers by Size Separated Chromatography - Part 5: Determination by Light Distribution Method (Turkish with English Abstract)
TS EN ISO 17556Plastics - Determination of final aerobic biodegradability in soil by measuring oxygen demand or released carbon dioxide in a respirometer
TS EN ISO 1874-2 Plastics - Polyamide (pa) molding and extrusion materials part 2: Preparation of test pieces and determination of their properties
TS EN ISO 11403-2 Plastics - Collection and presentation of comparable data - Part 2: Thermal and processing properties
TS EN ISO 1183-1 Plastics - Density determination methods of nonporous plastics - Part 1: Immersion method, liquid pyknometer method and titration method
TS EN ISO 14855-1 Plastics - Determination of degradation and final aerobic biological degradation under controlled digestion conditions - Method of analysis of released carbon dioxide
TS EN ISO 11357-3 Plastics - Differential scanning calorimetry (dsc) - Part 3: Determination of crystallization and melting enthalpy and temperature
TS EN ISO 11357-6 Plastics - Differential scanning calorimetry (dsc) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
TS EN ISO 75-1 Plastics - Determination of bending temperature under load - Part 1: General test method
TS EN ISO 75-2 Plastics- Determination of bending temperature under load- Part 2: Plastics and ebonite
TS EN ISO 180: 2000 / A2 Plastics - Determination of Izod impact strength
Plastics - Polyamides - Determination of viscosity number TS EN ISO 307: 2007 / A1: 2013
TS EN ISO 178: 2010 / A1 Plastics - Determination of flexural properties
TS EN ISO 14910-1: 2013 Plastics - Thermoplastic polyester / ester and polyether / ester elastomers for molding and extrusion - Part 1: System and principles for marking properties
TS EN ISO 14910-2: 2013 Plastics - Thermoplastic polyester / ester and polyether / ester elastomers for molding and extrusion - Part 2: Preparation of test specimens and determination of properties
TS EN 12090 Thermal insulation materials - For buildings - Determination of slip properties
TS EN 302-6 Adhesives for load-bearing timber - Test methods - Part 6: Determination of conventional compression time
TS EN 15342 Plastics - Recycled plastics - Characterization of recycled materials from polystyrene (PS)
TS EN 15343 Plastics - Recycled plastics - Plastic recycling traceability and conformity assessment and recycled content
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled materials from polyethylene (PE)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled materials from polypropylene (PP)
TS EN 15346 Plastics - Recycled plastics - Characterization of poly (vinylchloride) (PVC) recycled materials
TS EN ISO 15791-1 Plastics - Development and implementation of medium-sized fire tests for plastic products - Part 1: Inbound guidance
TS EN ISO 306 Plastics-Thermoplastic materials-Determination of Vicat softening temperature (VST)
TS EN 15534-1 Composites made of cellulose-based material and thermoplastic (commonly known as wood-polymer composite (WPC) or natural fiber composites (NFC)) - Part 1: Test methods for the characteristics of the product and its components
TS EN ISO 1183-1 Plastics - Density determination methods of nonporous plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1: 2012)
TS EN ISO 1133-1 Plastics - Determination of the mass flow rate (mfr) and volumetric flow rate (mfr) of molten thermoplastics - Part 1: Standard method
TS EN ISO 1133-2 Plastics - Determination of the mass flow rate (MFR) and volumetric flow rate (MVR) of molten thermoplastics - Part 2: Method for time-temperature history and / or moisture sensitive materials
TS EN ISO 11357-6 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
TS EN ISO 11357-5 Plastics - Differential scanning calorimetry (dsc) - Part 5: Determination of trend response time and temperature, reaction enthalpy and degree of conversion
TS EN ISO 11357-2 Plastics - Differential scanning calorimetry (dsc) - Part 2: Determination of glassization temperature and glassization step height
TS EN ISO 472 Plastics-Terms and recipes
TS 6127 EN ISO 4612 Preparation of pastry for plastics-PVC resins
S EN ISO 20753 Plastics - Test specimens 30.10.2014 83.080.01
TS EN ISO 6427 Plastics - Determination of substances which can be extracted with organic solvents (routine methods)
TS EN ISO 10350-1 / A1 Plastics - Accumulation and presentation of comparable single note data section 1: Molding materials
TS EN ISO 11357-4 Plastics - Differential scanning calorimetry (dsc) - Part 4: Determination of specific heat capacity
TS EN ISO 11403-1 Plastics-Collection and presentation of comparable multiple data-Part 1: Mechanical properties
TS EN ISO 11403-3 Plastics - Collection and presentation of comparable multiple data - Part 3: Environmental impacts on properties
TS EN ISO 4895 Plastics-Liquid epoxy resins-Determination of crystallization tendency
TS EN ISO 11358-1 Thermogravimetry of plastics - polymers - Part 1: General principles
TSE CEN ISO / TR 22007-5Plastic - Determination of thermal conductivity and thermal diffusivity - Part 5: interlaboratory test results of poly (methyl methacrylate) samples
TS EN ISO 3167 Plastics - Multi-purpose test pieces
TS EN 15347 Plastics - Recycled plastics - Characterization of plastic waste
TS EN ISO 17855-1 Plastics - Polyethylene (PE) molding and extrusion materials - Part 1: Description system and basic technical characteristics
TS EN ISO 19066-1 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) molding and extrusion materials - Part 1: Description system and technical characteristics
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled components from polyethylene (pe)
TS EN 15345 Plastics - Recycled plastics - Characterization of recycled components from polypropylene (pp)
TS EN ISO 9012 Gas welding device-Air suction hand torches-Features and tests
TS ISO 37 Tires and thermoplastics - Tensile stress - Determination of elongation properties
TS EN 15346 Plastics - Recycled plastics - Characterization of recycled components from poly (vinyl chloride)
TS EN 15348 Plastics - Recycled plastics - Characterization of recycled components from poly (ethylene terephthalate)
TS EN ISO 18064Termoplastic elastomers - Terms and abbreviations
TS EN ISO 19065-1 Plastics - Acrylonitrile Styrene Acrylate (ASA), Acrylonitrile (ethylene, propylene, diene) Styrene (AEPDS) and acrylonitrile (chlorinated polyethylene) styrene (ACS) casting and extrusion materials - Part 1: Marking system and basic features
TS EN ISO 306 Plastics - Thermoplastic substances - Determination of Vicat softening temperature (VST)
TS EN ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
TS EN ISO 527-2Plastics-Determination of tensile properties-Part 2: Test conditions for molding and extrusion plastics
tst EN 15534-1 Composites made of cellulose-based material and thermoplastics (commonly known as wood-polymer composites (WPC) or natural fiber composites (NFC)) Section 1: Test method for characteristics of products and components
TS EN ISO 20753 Plastics - Test specimens 26.11.2015 83.080.01
TS EN ISO 11357-5 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction temperatures and durations, reaction enthalpy and degree of conversion
TS EN ISO 11357-2 Plastics - Differential scanning calorimetry DSC) - Part 2: Determination of glass transition temperature and glass transition step height
TS EN ISO 3167 Plastics - Multi-purpose test specimens
TS EN ISO 4895 Plastics-Liquid epoxy resins-Determination of crystallization tendency
TS EN ISO 16396-1 Plastics - Polyamide (pa) molding and extrusion materials - Part 1: Display system, marking of products and principles for properties
TS EN ISO 19069-1 Plastics-Polypropylene (pp) molding and extrusion materials-Part 1: Principles for marking system and features
TS EN ISO 22007-6 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method using temperature-modulation technique for low thermal conductivity
TS EN ISO 899-2 / A1 Plastics - Determination of creep property - Part 2: Flexural strength in three-point loading - Amendment 1
TS EN ISO 899-1 / A1 Plastics - Determination of creep properties - Part 1: Tensile creep - Modified 1
TS EN ISO 1628-5 Plastics - Determination of viscosity in dilute solutions of polymers using capillary viscometers - Part 5: Thermoplastic polyester (tp) homopolymers and copolymers
TS EN ISO 9988-2 Plastics - Polyoxymethylene (pom) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS ISO 12000 Plastics / rubber - Polymer dispersions and rubber latexes (natural and synthetic) - Definitions and examination of test methods
TS ISO 6601 Plastics - Shear friction and wear - Determination of test parameters
TS ISO 6721-4 Plastics- Determination of dynamic mechanical properties- Part 4: Stress vibration- Non-resonance method
TS ISO 6721-5 / A1 Plastics- Determination of dynamic mechanical properties- Part 5: Bending vibration- Resonance-free method
TS ISO 6721-6 / A1 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Resonance free method
TS ISO 6721-7 / A1 Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Resonance-free method
TS ISO 6721-9 / A1 Plastics - Determination of dynamic mechanical properties - Part 9: Stress vibration - Propagation of sound waves
TS ISO 13927 Plastics - Simple determination of heat generated by conical radiant heaters and thermopile detectors
TS EN ISO 21509Plastics and ebonite - Shore durometer verification
TS EN ISO 22007-2 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Temporary flat and heat source (hot disc) method
TS ISO 871 Plastics - Determination of ignition temperature using hot air furnace
TS EN ISO 16012Plastics - Determination of linear dimensions of test specimens
TS EN 16795 Plastics - Method for determining the heat accumulation of flat surfaces by simulated solar radiation
TS EN ISO 11357-7 Plastics- Differential scanning calorimetry (dsc) - Part 7: Determination of crystallization kinetics
TS EN ISO 20200 Plastics - Determination of the degree of disintegration of plastic materials under conditions of decomposition simulated by laboratory scale testing
TS EN 16465 Plastics - Calibration of black standard and white standard thermometers and black panel and white panel thermometers used in natural and artificial weather conditions
TS EN ISO 19062-1 Plastics - Acrylonitrile-Butadiene-Styrene (abs) molding and extrusion materials - Part 1: Guidelines for marking system and properties
TS EN ISO 19064-1 Plastics - Styrene / acrylonitrile (SAN) molding and extrusion materials - Part 1: System and principles for marking properties
TS EN ISO 19063-1 Plastics - Impact-resistant polystyrene (PS-I) molding and extrusion materials - Part 1: The basics on which marking system and features are based
TS EN ISO 4892-3 Plastics-Methods of exposure to laboratory light sources-Section 3: Fluorescent uv lamps
TS EN ISO 17855-2 Plastics - Polyethylene (PE) molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties (ISO 17855-2: 2016)
TS EN ISO 19069-2 Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties (ISO 19069-2: 2016)
Plastics - Symbols and abbreviated terms - Part 1043: Main polymers and their special characteristics TS EN ISO 1-1 / A1
TS EN ISO 4892-1 Plastics-Methods of exposure to laboratory light sources-Section 1: General guide
Plastics - Symbols and abbreviated terms section 1043: Flame retardants TS EN ISO 4-1999: 1 / A4 Plastics
TS EN ISO 11357-1 Plastics - Differential scanning calorimetry (dsc) - Part 1: General principles
TS EN ISO 1043-3 Plastics-Symbols and abbreviated terms-Part 3: Plasticizers
TS EN ISO 15512Plastics - Determination of water content
TS EN ISO 11469 Plastics - Group identification and marking of plastics
TS EN ISO 177 Plastics-Determination of plasticizer transition
tst EN ISO 179-1 Plastics - Determination of Charpy impact properties - Part 1: Impact test without impression
TS 13720 / T1 Auxiliary products for the visually impaired or visually impaired - Product characteristics for sensible walking surfaces
TS EN ISO 25137-1 Plastics - Sulfon polymer molding and extrusion materials - Part 1: Identification system and the basis of specifications
TS EN ISO 25137-2 Plastics - Sulfon polymer molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 29664 Plastics - Artificial wind test including acid accumulation
TS EN ISO 16396-2 Plastics - Polyamide (pa) molding and extrusion materials part 2: Preparation of test pieces and determination of their properties
TSE CEN ISO / TR 17801 Plastics - Standard table for reference global solar spectral radiation at sea level - Horizontal and relative air mass
TSE CEN ISO / TR 18486 Plastics - Parameters comparing the spectral radiation of the laboratory light source to the sunlight spectral radiation value of air conditioning applications
TS EN ISO 20028-1 Plastics - Thermoplastic polyester (tp) molding and extrusion materials - Part 1: Basics for marking system and features
TS EN ISO 20028-2 Plastics - Thermoplastic polyester (tp) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS ISO 22196 Plastics - Measurement of antibacterial mobility on plastic surfaces
TS EN ISO 10724-1 Plastics - Preparation of test pieces by injection molding from thermoset powder molding mixtures - Part 1: General principles and molding of multi-purpose test pieces
TS EN ISO 62 Plastics-Determination of water absorption
TS EN ISO 175: 2010 Plastics - Determination of the effects when immersed in liquid chemicals - Test methods
TS EN ISO 176 Plastics-Determination of plasticizer loss, activated carbon method
TS EN ISO 179-1Plastics - Determination of Charpy impact properties-Part 1: Impact-free impact test
TS EN ISO 179-2Plastics-Determination of Charpy impact properties-Part 2: Measured impact test
TS EN ISO 180 Plastics - Determination of Izod impact strength
TS EN ISO 180 / A1 Plastics - Determination of Izod impact strength
TS 189 ISO 171Plastics- Molding materials- Batch factor determination
TS EN ISO 293 Plastics - Preparation of test pieces from thermoplastic materials by pressure molding
TS EN ISO 294-2 / A1 Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 2: Small draw bars
TS EN ISO 294-1 / A1 Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 1: General principles and molding of multi-purpose rod test pieces
TS EN ISO 294-3 Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 3: Small plates
TS EN ISO 294-4 Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 4: Determination of shrinkage in mold
TS EN ISO 295 Plastics - Thermoset materials - Preparation of test pieces by pressure molding
TS 448 EN ISO 60 Plastics - Determination of apparent density of materials that can be flowed from a particular funnel
TS 449 EN ISO 61 Plastics - Determination of apparent density of non-pourable plastic molding materials from a particular funnel
TS EN 477 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of impact strength in main profiles - Mass reduction method
TS EN 478 Unplasticized polyvinylchloride (pvc-U) profiles used in the manufacture of windows and doors, appearance after exposure to 150 c - Test method
TS EN 479 Non-plasticizing polyvinyl chloride (pvc-U) profiles used in the manufacture of windows and doors - Determination of permanent thermal elongation
TS EN 514 Non-plasticizing polyvinylchloride (pvc-U) profiles used in window and door manufacturing- Determination of strength of welded corners and t-joints
TS EN ISO 604 Plastics - Determination of the change in properties vis-à-vis printing
TS 703 EN ISO 584 (Formerly: TS 703 ISO 584) Plastics-Unsaturated polyester resins Determination of reactivity at 80 ° C (classical method)
TS 703 ISO 584: 1997 / T1 (Number modification, TS 703 EN ISO 584) Plastics-Unsaturated polyester resins Determination of reactivity at 80 ° C (classical method)
TS 785 EN ISO 489 Plastics - Determination of refractive index
TS EN ISO 846 Plastics - Evaluation of the effect of microorganisms
TS EN ISO 868 Determination of stiffness of plastics and ebonite by shear hardness
TS EN ISO 899-2 Plastics-Determination of creep property-Part 2: Flexural stress at three-point loading
TS EN ISO 899-1 Plastics-Determination of creep property-Part 1: Extrusion
TS 1006-2 ISO 182-2: 1997 / T1 (Number modification, TS 1006-2 EN ISO 182-2) Plastics are based on vinylchloride homopolymers and copolymers of pulps and products at high temperatures. : Ph method
TS 1006-3 ISO 182-3: 1997 / T1 (Number modification, TS 1006-3 EN ISO 182-3) Plastics are based on vinylchloride homopolymers and copolymers of pulps and products at high temperatures. : Conductometric method
TS 1006-4 ISO 182-4: 1997 / T1 (Number modification, TS 1006-4 EN ISO 182-4) Plastics-Vinylchloride homopolymers and copolymers based on the release of hydrogen chloride and other acidic products at high temperatures. 4: Potentiometric method
S 1065-1 ISO 11359-1 Plastics - Thermomechanical analysis (tma) - Part 1: General principles
TS 1065-2 ISO 11359-2 Plastics - Thermomechanical analysis (tma) - Part 2: Determination of linear thermal expansion coefficient and glass transition temperature
TS 1065-3 ISO 11359-3 Plastics - Thermomechanical analysis (tma) section 3: Determination of penetration temperature
TS 1066Plastics-Determination of flammability of self-supporting plastics
TS 1116 EN ISO 1158 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 1149: General principles and molding of multi-purpose rod test pieces
Plastics - Preparation of test pieces by injection molding of thermoplastic materials - Part 1149: Tensile rods
TS 1178 EN ISO 1163-1 Plastics-poly (vinyl chloride) (pvc-U) molding and extrusion materials with no plasticizer-Part 1: System and principles for marking properties
TS EN ISO 1183-2 Plastics-Non-porous plastics-Density determination methods-Part 2: Gradient density column method
TS EN ISO 1265 Plastics-Polyvinylchloride (pvc) resins-Determination of impurities and foreign particles
TS EN ISO 1269 Plastics - Vinyl chloride homopolymer and copolymer resins - Determination of volatile matter (including water)
TS ISO 1409 Plastics / rubber-polymer dispersions and rubber braids (natural and synthetic)
TS EN 1566-1 Plastic pipe systems - Used for disposal of cold and hot water in buildings - Part of chlorinated polyvinylchloride (pvc-C) 1: Pipes, fittings and system properties
TS 1621 EN ISO 585 Plastics - Non-plasticizing cellulose acetate - Determination of moisture content
TS 1622Plastics-Ash determination-Non-plasticized cellulose acetate
TS 1623 ISO 1061: 1997 / T1 (Number modification, TS 1623 EN ISO 1061) Plastics-Determination of free acidity of cellulose acetate without added plasticizer
TS EN ISO 1624Plastics - Homopolymer and copolymer resins of vinyl chloride - Aqueous screen analysis
TS EN ISO 1628-2 Plastics - Determination of polymer viscosity - In dilute solutions - Capillary viscometer method - Part 2: Polyvinyl chloride resins
TS EN ISO 1628-1 Plastics - Determination of the viscosity of polymers in dilute solutions using capillary viscometers - Part 1: General rules
TS ISO 1628-5 Determination of viscosity in dilute solutions of polymers using capillary viscometers-Part 5: Thermoplastic polyester (tp) homopolymers and copolymers
TS EN ISO 1628-3Plastics-Determination of viscosity number and limit viscosity number-Part 3: Polyethylenes and polypropylenes
TS 1677 EN ISO 308 Plastics - Phenolic molding materials - Determination of soluble substances in acetone (visible resin content of unmolded material)
tst 1678 EN ISO 604 Plastics - Determination of the change in properties vis-à-vis printing
TS 1724 ISO 1675: 1997 / T1 (Number modified, TS 1724 EN ISO 1675) Plastics liquid resins density determination-Pycnometer method
TS 1768 EN ISO 1264 Plastics-Homopolymer and copolymer resins of vinyl chloride-Determination of pH in aqueous extracts
TS EN 1778 Characteristic values for welded thermoplastic structures - Modules for thermoplastic equipment design and determination of permissible stresses
TS 1801 EN ISO 1060-1 Plastics-Homopolymer and copolymer resins of vinyl chloride-Part 1: System and principles for marking properties
TS 1853 EN ISO 1597 Plastics -Plasticizing cellulose acetate - Determination of acetic acid yield
TS 1877 EN ISO 1598 Plastics - Cellulose acetate - Determination of insoluble particles
TS EN ISO 2039-1 Plastics-Determination of hardness section 1: Ball dipping method
TS EN ISO 2114 / AC Plastics (polyester resins) - Paints and varnishes (binders) - Determination of partial acid value and total acid value
TS ISO 2115 Plastics-Polymer dispersions-Determination of white dot temperature and lowest film formation temperature
TS 2252 EN ISO 3001 Plastics-Epoxy compounds-Determination of epoxy equivalents
TS 2351 EN 1842Plastics-Thermoset molding pulp (smc-Bmc) determination of compression molding shrinkage
TS 2403 EN ISO 2554 Plastics - Unsaturated polyester resins - Determination of hydroxyl value
TS 2437 ISO 1110: 1997 / T1 (Number modification, TS 2437 EN ISO 1110) Accelerated conditioning of plastics-polyamides test pieces
TS ISO 2561 Plastics-Determination of styrene monomer residue in polystyrene by gas chromatography
TS EN ISO 2578Plastics - Time after long exposure to heat - Determination of temperature limits
TS EN ISO 2897-2 Plastics-Impact-resistant polystyrene (ps-I) molding and extrusion materials-Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 2898-2 Plastics -Plasticizing poly (vinyl chloride) (pvc-P) molding and extrusion materials-Part 2: Preparation of test specimens and determination of properties
TS 2992 ISO 800Plastics - Phenolic molding materials - Specifications
TS EN ISO 3146 + AC Plastics - Determination of melting property (melting temperature or melting range) of semi-crystalline polymers
tst 3154 EN ISO 3671 Determination of volatile matter in plastics-aminoplastic molding materials
TS 3155 EN ISO 4608 Plastics - Vinyl chloride homopolymer and copolymer resins - General purpose - Determination of plasticizer absorption at room temperature
TS 3198 EN ISO 3521 Plastics - Unsaturated polyester and epoxy resins - Determination of total volume shrinkage
TS EN ISO 3451-5 Plastics-Determination of ash part 5: Polyvinylchloride
TS EN ISO 3451-1 Plastics - Determination of ash - Part 1: General methods
TS EN ISO 3671 Determination of volatile matter in plastics-Aminoplastic molding materials
Plastics-Vinyl chloride (pvc-P) homopolymer and copolymer compounds -Plasticized-Section 4410: Indication by markings TS 2898 EN ISO 1-4410
TS 4410 ISO 2898-1: 1997 / T1 (Number modification, TS 4410 EN ISO 2898-1) Plastics - Vinyl chloride (pvc-P) homopolymer and copolymer compounds - Plasticized - Part 1: Indication by signs
TS ISO 4576 Plastics-Polymer dispersions-Determination of sieve residue (coarse particles and coagulated content)
TS EN ISO 4577 Plastics - Polypropylene and propylene copolymers - Determination of resistance to oxidation in hot air - Oven method
TS ISO 4581 Plastics-Styrene / acrylonitrile copolymers-Determination of residual acrylonitrile monomer content-Gas chromatography method
TS EN ISO 4589-2 / A1 Plastics - Determination of combustion properties by oxygen index - Part 2: Determination of ambient temperature
TS EN ISO 4597-1 Plastics-Hardeners and accelerators for epoxy resins-Part 1: Marking
TS ISO 4613-1: 1996 / T1 (Number amendment, TS EN ISO 4613-1) Plastics-Ethylene / vinyl acetate (e / vac) molding and extrusion materials-Part 1: Indication and identification with markings
Plastics-Ethylene / vinylacetate (e / vac) molding and extruding agents TS EN ISO 4613-2 / A1 section 2: Preparation of test specimens and determination of their properties
Plastics - Liquid, emulsion or dispersion polymers - Resins - Determination of viscosity using a rotary viscometer at a given shear rate
TS 6126 EN ISO 2555 (Formerly: TS 6126 ISO 2555) Plastics-Resins in liquid or emulsion or disperse form-Determination of apparent viscosity brookfield method14.04.1998
TS 6126 ISO 2555: 1998 / T1 (Number modification, TS 6126 EN ISO 2555) Plastics-Resins in liquid or emulsion or dispersed form-Determination of apparent viscosity brookfield method
TS ISO 6133 Rubber and plastics-Analysis of multiple peaks obtained in the determination of tear strength and adhesion strength
TS 6391 EN ISO 1060-2Plastics-Homopolymer and copolymer resins of vinyl chloride-Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 6401 Plastics-Vinyl chloride homopolymer and copolymer resins-Determination of vinyl chloride monomer residue-Gas chromatographic method
TS EN ISO 6402-1 Plastics - Impact-resistant, acrylonitrile / styrene (asa, aes, acs) based molding and extrusion materials (except those modified with butadiene) section 1: Indication of properties and property criteria
TS EN ISO 6402-2 Plastics - Impact resistant, acrylonitrile / styrene (asa, acs) type molding and extrusion materials - except for butadiene modified materials - Part 2: Preparation of test pieces and determination of their properties
TS EN ISO 6603-1 Plastics- Determination of the impact strength of rigid plastics - Part 1: Tool-less impact test
TS EN ISO 6603-2 Plastics- Determination of the impact strength of rigid plastics- Part 2: Instrument impact test
TS 6689 EN ISO 1599 Plastics-Cellulose acetate-Determination of viscosity loss during molding
TS ISO 6691 Thermoplastic polymers for plain bearings - Classification and designation
TS 6698 EN ISO 6186 Plastics - Determination of flowability
TS EN ISO 6721-3 Plastics- Determination of dynamic mechanical properties part 3: Bending vibration resonance curve method
TS ISO 6721-5 Plastics- Determination of dynamic mechanical properties- Part 5: Bending vibration- Resonance-free method
TS ISO 6721-6 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Resonance free method
TS ISO 6721-7 Plastics- Determination of dynamic mechanical properties- Part 7: Torsional vibration- Resonance-free method
TS ISO 6721-8 Plastics- Determination of dynamic mechanical properties- Part 8: Longitudinal vibration and shear vibration- Wave propagation method
TS ISO 6721-9 Plastics - Determination of dynamic mechanical properties - Part 9: Stress vibration - Propagation of sound waves
TS ISO 6721-10 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity - Rheometer method with parallel plate oscillator
TS EN ISO 6721-2 Plastics- Determination of dynamic mechanical properties - Part 2: Torsional pendulum method
TS EN ISO 6721-1: 2011 Plastics- Determination of dynamic mechanical properties-Part 1: General principles
Plastics - Epoxy resins - Part 6723: Display with markings TS 3673 EN ISO 1-1 Plastics
TS 6995 EN ISO 3672-1 Plastics-Unsaturated polyester resins (up-R) section 1: System for indication of properties
TS EN ISO 7327 Plastics - Hardeners and accelerators for epoxy resins - Determination of acid anhydride and free acid
TS 7639 ISO 3451-2 Plastics-Determination of ash-Part 2: Polyalkylene terephthalates
TS 7639 ISO 3451-2 Plastics-Determination of ash-Part 2: Polyalkylene terephthalates
TS 7736 EN ISO 3451-4 Plastics - Determination of ash - Part 4: Polyamides
TS EN ISO 7808 Plastics - Thermosetting molding materials - Determination of flow mass transfer
TS 7901 EN ISO 1622-2 Plastics - Polystyrene (ps) molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS 7911 EN ISO 4615 Plastics - Unsaturated polyester and epoxy resins - Determination of total chloride content
TS 8105 ISO 1628-4 Plastics-Determination of the viscosity of dilute polymer solutions using capillary viscometers-Part 4: Polycarbonate (pc) molding and extrusion materials
TS 8106-4 ISO 4892-4 Plastics-Methods of exposure to laboratory light sources-Section 4: Open-flame carbon arc lamps
Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 8257: System and principles of marking features
Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 8257: System and principles of marking features
TS ISO 8257-2 / T1 (Number modification: TS EN ISO 8257-2) Plastics - Poly (methyl methacrylate) (pmma) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 8619 Plastics - Phenolic resin powder - Determination of yield distance on glass plate
TS EN ISO 8975 Plastics-Phenolic resins-Ph determination
TS EN ISO 8985 Plastics - Ethylene / vinyl acetate copolymer (evac) - Thermoplastics - Determination of vinyl acetate content
tst EN ISO 8986-2 Plastics - Polybutene (pb) molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS EN ISO 8986-2 Plastics - Polybutene (pb) molding and extrusion materials - Part 2: Preparation of test pieces and determination of their properties
TS EN ISO 8987 Plastics - Phenolic resins - Determination of reactivity on a b-Alternating test plate
TS EN ISO 8988 Plastics - Phenolic resins - Determination of hexamethylenetetramine - Kjeldahl method and perchloric acid method
TS EN ISO 8989 Plastics-Liquid phenolic resins-Determination of water miscibility
TS 9140 EN ISO 3915 Plastics - Determination of resistivity of conductive plastics
TS EN ISO 9396 Plastics - Phenolic resins - Determination of the gelation time of resols using automatic devices
TS 9406 EN ISO 2039-2 Plastics - Determination of hardness - Part 2: Rockwell hardness
TS EN ISO 9771 plastics-Phenolic resins- Determination of pseudo adiabatic temperature rise of liquid resols cured under acidic conditions
TS EN ISO 9773 Plastics - Determination of combustion properties of vertical, thin, flexible test specimens in contact with a small flame ignition source
TS EN ISO 9773 / A1 Plastics - Determination of the combustion properties of thin, flexible test specimens in vertical position in contact with a small flame ignition source
TS EN ISO 9944 Plastics-Phenolic resins-Determination of electrical self-conductivity of resin extracts
TS EN ISO 10366-2 Plastics - Methyl methacrylate / acrylonitrile / butadiene / styrene (mabs) type molding and extrusion materials part 2: Preparation of test pieces and determination of properties
TS EN ISO 10601 Plastics - Homopolymer and copolymer resins of vinyl chloride Chapter 1: Short demonstration system and principle of properties
TS EN ISO 10724-2 Plastics - Preparation of test pieces by injection molding from thermoset powder molding mixtures - Part 2: Small plates
TS 11162-1 EN ISO 4589-1 Plastics - Determination of combustion behavior with oxygen index - Part 1: Guide
TS 11162-2 EN ISO 4589-2 Plastics - Determination of combustion properties by oxygen index - Part 2: Determination of ambient temperature
TS 11162-3 EN ISO 4589-3 Plastics - Determination of combustion properties by oxygen index - Part 3: High temperature test
TS EN ISO 11248Plastics - Thermoset molding materials - Short term performance evaluations at high temperatures
TS EN ISO 11337: 2010 Plastics - Polyamides - Determination of caprolactam and w-laurolactam by gas chromatography
TS EN ISO 11358Plastics - Thermogravimetric analysis of polymers (tg) - General principles
TS EN ISO 11402Fenolic, amino and condensation resins - Determination of free formaldehyde
TS EN ISO 11402 / AC Phenolic, amino and condensation resins - Determination of free formaldehyde content
TS EN ISO 11409 Plastics - Phenolic resins - Determination of reaction temperatures and temperatures by differential scanning colorimeter
TS 11415 EN ISO 4894-2 Plastics-Styrene / acrylonitrile (yellow) molding and extrusion materials-Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 11468 Plastics - Preparation of PVC dough for test purposes - Thawing method
TS EN ISO 11542-2 Plastics - Molding and extrusion materials - Very high molar polyethylene (pe-Uhmw) - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 11542-2 / AC Plastics - Molding and extrusion materials - Very high molar mass polyethylene (pe-Uhmw) - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 12058-1 / AC Plastics - Determination of viscosity using ball-drop viscometer - Part 1: Slope pipe method
TS EN ISO 12086-1 Plastics - Molding and extrusion materials with fluoropolymer dispersions - Part 1: System and principles of marking features
TS EN ISO 12086-2 Plastics - Fluoropolymer dispersions and molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 12086-2 / AC Plastics - Fluoropolymer dispersions and molding and extrusion materials - Part 2: Preparation of test specimens and determination of their properties
TS EN 12118 Plastic pipe systems - Determination of moisture content in thermoplastics by coulometry method
TS ISO 12992 Plastics-Determination of vertical flame spread in films and sheets
TS EN 14293 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements
TS EN 14481 Materials and materials in contact with foodstuffs - Plastics - Test methods for the determination of oil contact
TS EN ISO 14526-3 Plastics - Phenolic powder molding mixtures (pf-Pmc) - Part 3: Properties of some molding mixtures
TS EN ISO 14528-1 Plastics - Melamine - Formaldehyde powder molding mixtures (mf-Pmc) - Part 1: System and principles of marking features
TS EN ISO 14528-2 Plastics - Melamine - Formaldehyde powder molding mixtures (mf-Pmc) - Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 14528-3 Plastics - Melamine - Formaldehyde powder molding mixtures (mp-Pmc) - Part 3: Properties of some molding mixtures
TS EN ISO 14529-2 Plastics - Melamine / phenolic powder molding mixtures (mp-Pmc) - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 14530-1 Plastics - Powdered unsaturated polyester molding mixtures (up-Pmcs) - Part 1: Principles for marking system and properties
TS EN ISO 14530-2 Plastics - Powdered unsaturated polyester molding mixtures (up-Pmcs) - Part 2: Preparation of test pieces and determination of properties
TS EN ISO 14530-3 Plastics - Powdered unsaturated polyester molding mixtures (up-Pmcs) - Part 3: Properties of selected molding mixtures
TS EN ISO 14663-1 Plastics - Ethylene / vinyl alcohol (evoh) copolymer molding and extruding agents - Part 1: Principles and marking system for specifications
TS EN ISO 14663-2 Plastics- Ethylene / vinyl alcohol (evoh) copolymer molding and extrusion materials- Part 2: Preparation of test pieces and determination of their properties
TS ISO 14848 Plastics - Unsaturated polyester resins - Determination of reactivity at 130ºc
TS EN ISO 14851 (Formerly: TS ISO 14851) Determination of final aerobic biodegradability of plastic materials in aqueous media - Method for measuring oxygen demand in a closed breathing apparatus
TS ISO 14851: 2002 / T1 (Number modification, TS EN ISO 14851) Determination of the final aerobic biodegradability of plastic materials in aqueous media - Method of measuring oxygen demand in a closed breathing apparatus
TS EN ISO 14852 (Formerly: TS ISO 14852) Determination of the final aerobic biodegradability of plastic materials in water - Method of determination of released carbon dioxide
TS ISO 14852: 2002 / T1 (Number modification, TS EN ISO 14852) Determination of the final aerobic biodegradability of plastic materials in aqueous media - Method of determination of released carbon dioxide
TS EN ISO 14855-2 Determination of ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method of analysis of released carbon dioxide - Part 2: Gravimetric measurement of released carbon dioxide
TS EN ISO 14896 Plastics - Polyurethane raw materials - Determination of isocyanate
TS EN 14987 Plastics - Evaluation of plastic disposability in wastewater treatment plants - Test scheme for final acceptance and properties
TS EN 14995 Plastics - Evaluation of composition stability - Test chart and properties
TS EN ISO 15252-1 Plastics - Epoxy molding mixtures in powder form (ep-Pmc) - Part 1: Marking system and classification principles
TS EN ISO 15252-2 Plastics - Epoxy-based powder molding blends (ep-Pmcs) - Part 2: Specifications for some molding blends
Plastics - Powder epoxy molding mixtures (ep-Pmc) - Part 15252: Limit value of the properties of some molding mixtures
TS EN 15342 Plastics - Recycled plastics - Characterization of recycled components from polystyrene (ps)
TS EN 15343 Plastics - Recycled plastics - Traceability of plastic recovery, conformity assessment and recovery content
TS EN 15344 Plastics - Recycled plastics - Characterization of recycled components from polyethylene (pe)
TS EN ISO 15526-2 Plastics - Polyketon (pk) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS ISO 15853 Thermoplastic materials-Preparation of tubular test pieces for the determination of hydrostatic strength of materials used in injection molding
tst ISO 14855: 1999 Plastics - Determination of decomposition and final aerobic biodegradation under controlled digestion conditions - Method of analysis of released carbon dioxide
TS EN ISO 21627-1 Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine
TS EN ISO 21627-3 Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine
TS EN ISO 21627-2 Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine
TS EN ISO 22088-1 Plastics - Determination of resistance to environmental stress cracking - Part 1: General guide
TS EN ISO 22088-6 Plastics - Determination of resistance to environmental stress cracking (wg) - Part 6: Low tensile speed method
TS EN ISO 22088-5 Plastics - Determination of resistance to environmental stress cracking (wg) - Section 5: Deforming method under constant tensile
TS EN ISO 28941-1 Plastics-Poly (phenylene ether) (PPE) molding and extrusion materials-Part 1: Basics for short demonstration systems and features
tst EN ISO 14855-1 Plastics - Determination of degradation and final aerobic biological degradation under controlled digestion conditions - Method of analysis of released carbon dioxide
TS EN ISO 13468-1 Plastics - Determination of the total light transmittance of transparent materials - Part 1: Single beam beam device
TS 1724 EN ISO 1675 (Formerly: TS 1724 ISO 1675) Determination of density of plastics, liquid resins-Pycnometer method
TS 5773 EN ISO 13758 Liquefied petroleum gases - Determination of propane dryness - Valve freezing method
TS 3779 EN ISO 2818 Plastics - Preparation of test pieces by machining
TS EN ISO 2578Plastics - Time - Determination of temperature limits - After prolonged exposure to heat
TS EN ISO 10093 Plastics - Fire tests - Standard ignition sources
TS EN ISO 13468-2 Plastics - Determination of the total light transmittance of transparent materials - part 2: Double beam path device
TS EN 1122 Plastics - Determination of cadmium - Wet cracking method27.03.2007
TS EN ISO 10093Plastics - Fire tests - Standard ignition sources
TS ISO 10840 Plastics - Application guide for standard fire tests
TS EN ISO 1183-3 Plastics-Non-porous plastics-Density determination methods-Part 3: Gas pycnometer method
TS 1854 ISO 1875 plastics - Plasticizer-added cellulose acetate - Determination of the amount of substance that can be extracted with diethyl ether
TS 8241 ISO 8660 Plastics - Determination of permanganate absorption number of caprolactam - Spectrometric method
TS EN 14233 Food contact materials and articles - Plastics - Determination of the transition temperature in food and plastic encounter during microwave and conventional oven heating
TS EN ISO 12058-1-plastics - Determination of viscosity using ball-drop viscometer - Part 1: Slope pipe method
TS EN ISO 179-2Plastics-Determination of Charpy impact properties-Part 2: Instrument impact test
TS EN 1122 Plastics - Determination of cadmium - Wet shredding method
Plastics - Non-porous plastics - Density determination methods - Part 1183: Gradient density column method TS EN ISO 2-2 Plastics
TS EN ISO 1183-3 Plastics-Non-porous plastics-Density determination-Part 3: Gas pycnometer method
TS EN ISO 846 Plastics - Evaluation of the effect of microorganisms (technical committee stage)
TS EN ISO 4892-1 Plastics-Methods of exposure to laboratory light sources-Section 1: General rules
TS EN ISO 8256 Plastics- Determination of tensile-impact strength
TS EN ISO 13468-2 Plastics - Determination of the total light transmittance of transparent materials - Part 2: Double beam path device
TS EN ISO 22088-2 Plastics - Determination of resistance to environmental stress cracking - Part 2: Constant tensile load method
TS EN ISO 22088-3 Plastics - Determination of resistance to environmental stress cracking - Part 3: Twisted strip method
TS EN ISO 22088-4 Plastics - Determination of resistance to environmental stress cracking - Part 4: Ball or needle clamping method
TS EN ISO 12162 Thermoplastic materials - For pipes and fittings used in pressure-applied situations - Classification and marking - Total service coefficient
TS EN ISO 3251 Paints, varnishes and plastics - Determination of non-volatile matter content
TS EN ISO 4611 Plastics - Determination of the effect of hot and humid environment, sprayed water and salt mist.
TS EN ISO 178 Plastics-Determination of flexural properties
TS EN ISO 877-2 Plastics - Methods of exposure to daylight - Part 2: Leaving directly behind sunlight and window glass
TS EN ISO 877-1 Plastics - Methods of exposure to sunlight - Part 1: General rules
TS EN ISO 877-3 Plastics - Methods of exposure to sunlight - Part 3: Intensified sunlight
TS EN ISO 10927 Plastics- Determination of molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption / ionization flight / transit time mass spectrometry (maldi-Tofms)
TS EN ISO 527-2 Plastics-Determination of tensile properties-Part 2: Test conditions for molding and extrusion plastics
TS EN ISO 527-1 Plastics-Determination of tensile properties-Part 1: General principles
TS EN ISO 179-2 / A1 Plastics-Determination of Charpy impact properties-Part 2: Impact test with measuring instrument-Modification 1: Accuracy data
TS EN ISO 1043-1 Plastics-Symbols and abbreviated terms-Part 1: Main polymers and their special characteristics
TS EN ISO 1043-2 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
TS EN ISO 22007-4 Plastics-Determination of thermal conductivity and thermal diffusivity-Part 4: Laser flash method
TS EN ISO 22007-3 Plastics-Determination of thermal conductivity and thermal diffusivity-Part 3: Temperature wave analysis method
TS EN ISO 22007-1 Plastics-Determination of thermal conductivity and thermal diffusion-Part 1: General rules
TS EN ISO 1043-1 Plastics - Symbols and abbreviated terms - Part 1: Main polymers and their special characteristics
TS EN ISO 1043-2 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
tst 10979 Plastics - Ring or tubular - Determination of tensile strength - Splitting disc method
TS EN ISO 4892-2 Plastics-Methods of exposure to laboratory light sources-Section 2: Xenon arc lamp
Determination of maximum aerobic biodegradability of plastics under controlled composting conditions - Method of analysis of released carbon dioxide - Part 14855: General method (ISO 1-1: 14855) TS EN ISO 1-2012
TS EN ISO 14855-2 Determination of maximum aerobic biodegradability of plastic materials under controlled composting conditions - Method of analysis of released carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide released in laboratory-level experiment
TS EN ISO 17556Plastics - Determination of the maximum aerobic biodegradability of plastic materials in soil by measuring oxygen demand or the amount of carbon dioxide released by the respirometer
TS EN ISO 1628-1: 2009 / A1 Plastics-Determination of the fluidity of polymers in diluted solutions by capillary viscometer-Part 1: General principles
TS EN ISO 16014-5 Plastics - Determination of Molecular Mass and Average Molecular Mass Distribution of Polymers by Size Separated Chromatography - Part 5: Determination by Light Distribution Method (Turkish with English Abstract)
TS EN ISO 17556Plastics - Determination of final aerobic biodegradability in soil by measuring oxygen demand or released carbon dioxide in a respirometer
TS EN ISO 11403-2 Plastics - Collection and presentation of comparable data - Part 2: Thermal and processing properties
TS EN ISO 1183-1 Plastics - Density determination methods of nonporous plastics - Part 1: Immersion method, liquid pyknometer method and titration method
TS EN ISO 5659-2 Plastics - Smoke formation - Part 2: Determination of optical density by a single chamber test
TS EN ISO 14855-1 Plastics - Determination of degradation and final aerobic biological degradation under controlled digestion conditions - Method of analysis of released carbon dioxide
TS EN ISO 11357-3 Plastics - Differential scanning calorimetry (dsc) - Part 3: Determination of crystallization and melting enthalpy and temperature
TS EN ISO 11357-6 Plastics - Differential scanning calorimetry (dsc) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
TS EN ISO 75-1 Plastics - Determination of bending temperature under load - Part 1: General test method
TS EN ISO 75-2 Plastics- Determination of bending temperature under load- Part 2: Plastics and ebonite
TS EN ISO 180: 2000 / A2 Plastics - Determination of Izod impact strength
TS EN ISO 178: 2010 / A1 Plastics - Determination of flexural properties
TS EN ISO 15791-1 Plastics - Development and implementation of medium-sized fire tests for plastic products - Part 1: Inbound guidance
TS EN 15534-1 Composites made of cellulose-based material and thermoplastic (commonly known as wood-polymer composite (WPC) or natural fiber composites (NFC)) - Part 1: Test methods for the characteristics of the product and its components
TS EN ISO 1183-1 Plastics - Density determination methods of nonporous plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1: 2012)
TS EN ISO 11357-6 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
TS EN ISO 11357-5 Plastics - Differential scanning calorimetry (dsc) - Part 5: Determination of trend response time and temperature, reaction enthalpy and degree of conversion
TS EN ISO 11357-2 Plastics - Differential scanning calorimetry (dsc) - Part 2: Determination of glassization temperature and glassization step height
TS EN ISO 472 Plastics-Terms and recipes
TSE K 262 Paper towel and paper napkin dispensers - Acrylonitrile Butadiene Styrene (ABS) and Styrene Acrylonitrile (SAN)
TS EN 16472 Plastics - Accelerated artificial method of aging using Medium Pressure Mercury Vapor Lamps
TS EN ISO 20753 Plastics - Test specimens
TS EN ISO 6427Plastics-Determination of substances which can be extracted with organic solvents (routine methods)
TS EN ISO 10350-1 / A1 Plastics - Accumulation and presentation of comparable single note data section 1: Molding materials
TS EN ISO 11357-4 Plastics - Differential scanning calorimetry (dsc) - Part 4: Determination of specific heat capacity
TS EN ISO 11403-1 Plastics-Collection and presentation of comparable multiple data-Part 1: Mechanical properties
TS EN ISO 11403-3 Plastics - Collection and presentation of comparable multiple data - Part 3: Environmental impacts on properties
TS EN ISO 11358-1 Thermogravimetry of plastics - polymers - Part 1: General principles
TSE CEN ISO / TR 22007-5Plastic - Determination of thermal conductivity and thermal diffusivity - Part 5: interlaboratory test results of poly (methyl methacrylate) samples
TS EN ISO 3167 Plastics - Multi-purpose test pieces
TS EN 15347 Plastics - Recycled plastics - Characterization of plastic waste
TS EN ISO 527-1 Plastics - Determination of tensile properties - Part 1: General principles
TS EN ISO 527-2 Plastics-Determination of tensile properties-Part 2: Test conditions for molding and extrusion plastics
tst EN 15534-1 Composites made of cellulose-based material and thermoplastics (commonly known as wood-polymer composites (WPC) or natural fiber composites (NFC)) Section 1: Test method for characteristics of products and components
TS EN ISO 20753 Plastics - Test samples
TS EN ISO 11357-5 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction temperatures and durations, reaction enthalpy and degree of conversion
TS EN ISO 11357-2 Plastics - Differential scanning calorimetry DSC) - Part 2: Determination of glass transition temperature and glass transition step height
TS EN ISO 3167 Plastics - Multi-purpose test specimens
TS EN ISO 22007-6 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method using temperature-modulation technique for low thermal conductivity
TS EN ISO 899-2 / A1 Plastics - Determination of creep property - Part 2: Flexural strength in three-point loading - Amendment 1
TS EN ISO 899-1 / A1 Plastics - Determination of creep properties - Part 1: Tensile creep - Modified 1
TS ISO 6601 Plastics - Shear friction and wear - Determination of test parameters
TS ISO 6721-4 Plastics- Determination of dynamic mechanical properties- Part 4: Stress vibration- Non-resonance method
TS ISO 6721-5 / A1 Plastics- Determination of dynamic mechanical properties- Part 5: Bending vibration- Resonance-free method
TS ISO 6721-6 / A1 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Resonance free method
TS ISO 6721-7 / A1 Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Resonance-free method
TS ISO 6721-9 / A1 Plastics - Determination of dynamic mechanical properties - Part 9: Stress vibration - Propagation of sound waves
TS ISO 13927 Plastics - Simple determination of heat generated by conical radiant heaters and thermopile detectors
TS EN ISO 21509 Plastics and ebonite - Shore durometer verification
TS EN ISO 22007-2 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Temporary flat and heat source (hot disc) method
TS ISO 871 Plastics - Determination of ignition temperature using hot air furnace
TS EN ISO 16012 Plastics - Determination of linear dimensions of test specimens
TS EN 16795 Plastics - Method for determining the heat accumulation of flat surfaces by simulated solar radiation
TS EN ISO 11357-7 Plastics- Differential scanning calorimetry (dsc) - Part 7: Determination of crystallization kinetics
TS EN ISO 20200 Plastics - Determination of the degree of disintegration of plastic materials under conditions of decomposition simulated by laboratory scale testing
TS EN 16465 Plastics - Calibration of black standard and white standard thermometers and black panel and white panel thermometers used in natural and artificial weather conditions
TS EN ISO 4892-3 Plastics-Methods of exposure to laboratory light sources-Section 3: Fluorescent uv lamps
Plastics - Symbols and abbreviated terms - Part 1043: Main polymers and their special characteristics TS EN ISO 1-1 / A1
TS EN ISO 4892-1 Plastics-Methods of exposure to laboratory light sources-Section 1: General guide
Plastics - Symbols and abbreviated terms section 1043: Flame retardants TS EN ISO 4-1999: 1 / A4 Plastics
TS EN ISO 11357-1 Plastics - Differential scanning calorimetry (dsc) - Part 1: General principles
TS EN ISO 1043-3 Plastics-Symbols and abbreviated terms-Part 3: Plasticizers
TS EN ISO 15512 Plastics - Determination of water content
TS EN ISO 11469 Plastics - Group identification and marking of plastics
TS EN ISO 177 Plastics-Determination of plasticizer transition
tst EN ISO 179-1 Plastics - Determination of Charpy impact properties - Part 1: Impact test without impression
TS EN ISO 29664 Plastics - Artificial wind test including acid accumulation
TSE CEN ISO / TR 17801 Plastics - Standard table for reference global solar spectral radiation at sea level - Horizontal and relative air mass
TSE CEN ISO / TR 18486 Plastics - Parameters comparing the spectral radiation of the laboratory light source to the sunlight spectral radiation value of air conditioning applications
TS ISO 22196 Plastics - Measurement of antibacterial mobility on plastic surfaces25.01.2010
TS EN ISO 62 Plastics-Determination of water absorption
TS EN ISO 175: 2010 Plastics - Determination of the effects when immersed in liquid chemicals - Test methods
TS EN ISO 176 Plastics-Determination of plasticizer loss, activated carbon method
TS EN ISO 179-1 Plastics - Determination of Charpy impact properties - Part 1: Impact test without impression
TS EN ISO 179-2 Plastics-Determination of charpy impact properties-Part 2: Impact test with measuring instrument
TS EN ISO 180 Plastics - Determination of Izod impact strength
TS EN ISO 180 / A1 Plastics - Determination of Izod impact strength
TS 189 ISO 171 Plastics - Molding materials - Batch factor determination
TS 449 EN ISO 61 Plastics - Determination of apparent density of non-pourable plastic molding materials from a particular funnel
TS EN ISO 604 Plastics - Determination of the change in properties vis-à-vis printing
TS 785 EN ISO 489 Plastics - Determination of refractive index
TS EN ISO 846 Plastics - Evaluation of the effect of microorganisms
TS EN ISO 868 Determination of stiffness of plastics and ebonite by shear hardness
TS EN ISO 899-2 Plastics-Determination of creep property-Part 2: Flexural stress at three-point loading
TS EN ISO 899-1 Plastics-Determination of creep property-Part 1: Extrusion
TS 1065-1 ISO 11359-1 Plastics - Thermomechanical analysis (tma) - Part 1: General principles
TS 1065-2 ISO 11359-2 Plastics - Thermomechanical analysis (tma) - Part 2: Determination of linear thermal expansion coefficient and glass transition temperature
TS 1065-3 ISO 11359-3 Plastics - Thermomechanical analysis (tma) section 3: Determination of penetration temperature
TS EN ISO 1183-2 Plastics-Non-porous plastics-Density determination methods-Part 2: Gradient density column method
TS ISO 1409 Plastics / rubber-polymer dispersions and rubber braids (natural and synthetic)
TS EN 1566-1 Plastic pipe systems - Used for disposal of cold and hot water in buildings - Part of chlorinated polyvinylchloride (pvc-C) 1: Pipes, fittings and system properties
TS EN ISO 1628-1 Plastics - Determination of the viscosity of polymers in dilute solutions using capillary viscometers - Part 1: General rules
tst 1678 EN ISO 604 Plastics - Determination of the change in properties vis-à-vis printing
TS EN ISO 2039-1 Plastics-Determination of hardness section 1: Ball dipping method
TS ISO 2115 Plastics-Polymer dispersions-Determination of white dot temperature and lowest film formation temperature
TS EN ISO 2578 Plastics - Time after long exposure to heat - Determination of temperature limits
TS EN ISO 3451-1 Plastics - Determination of ash - Part 1: General methods
TS ISO 4576 Plastics-Polymer dispersions-Determination of sieve residue (coarse particles and coagulated content)
TS EN ISO 4589-2 / A1 Plastics - Determination of combustion properties by oxygen index - Part 2: Determination of ambient temperature
Plastics - Liquid, emulsion or dispersion polymers - Resins - Determination of viscosity using a rotary viscometer at a given shear rate
TS 6126 EN ISO 2555 (Formerly: TS 6126 ISO 2555) Plastics-Resins in liquid or emulsion or dispersed form-Determination of apparent viscosity brookfield method
TS ISO 6133 Rubber and plastics-Analysis of multiple peaks obtained in the determination of tear strength and adhesion strength
TS EN ISO 6603-1 Plastics- Determination of the impact strength of rigid plastics - Part 1: Tool-less impact test
TS EN ISO 6603-2 Plastics- Determination of the impact strength of rigid plastics- Part 2: Instrument impact test
TS 6698 EN ISO 6186 Plastics - Determination of flowability
TS EN ISO 6721-3 Plastics- Determination of dynamic mechanical properties part 3: Bending vibration resonance curve method
TS ISO 6721-5 Plastics- Determination of dynamic mechanical properties- Part 5: Bending vibration- Resonance-free method
TS ISO 6721-6 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Resonance free method
TS ISO 6721-7 Plastics- Determination of dynamic mechanical properties- Part 7: Torsional vibration- Resonance-free method
TS ISO 6721-8 Plastics- Determination of dynamic mechanical properties- Part 8: Longitudinal vibration and shear vibration- Wave propagation method
TS ISO 6721-9 Plastics - Determination of dynamic mechanical properties - Part 9: Stress vibration - Propagation of sound waves
TS ISO 6721-10 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity - Rheometer method with parallel plate oscillator
TS EN ISO 6721-2 Plastics- Determination of dynamic mechanical properties - Part 2: Torsional pendulum method
TS EN ISO 6721-1: 2011 Plastics- Determination of dynamic mechanical properties-Part 1: General principles
TS 8106-4 ISO 4892-4 Plastics-Methods of exposure to laboratory light sources-Section 4: Open-flame carbon arc lamps
TS 9140 EN ISO 3915 Plastics - Determination of resistivity of conductive plastics
TS 9406 EN ISO 2039-2 Plastics - Determination of hardness - Part 2: Rockwell hardness
TS EN ISO 9773Plastics - Determination of the combustion properties of vertical, thin, flexible test specimens in contact with a small flame ignition source
TS EN ISO 9773 / A1 Plastics - Determination of the combustion properties of thin, flexible test specimens in vertical position in contact with a small flame ignition source
TS 11162-1 EN ISO 4589-1 Plastics - Determination of combustion behavior with oxygen index - Part 1: Guide
TS 11162-2 EN ISO 4589-2 Plastics - Determination of combustion properties by oxygen index - Part 2: Determination of ambient temperature
TS 11162-3 EN ISO 4589-3 Plastics - Determination of combustion properties by oxygen index - Part 3: High temperature test
TS EN ISO 11358 Plastics - Thermogravimetric analysis of polymers (tg) - General principles
TS 11415 EN ISO 4894-2 Plastics-Styrene / acrylonitrile (yellow) molding and extrusion materials-Part 2: Preparation of test specimens and determination of their properties
TS EN ISO 12058-1 / AC Plastics - Determination of viscosity using ball-drop viscometer - Part 1: Slope pipe method
TS EN 14481 Materials and materials in contact with foodstuffs - Plastics - Test methods for the determination of oil contact
TS EN ISO 14851 (Formerly: TS ISO 14851) Determination of final aerobic biodegradability of plastic materials in aqueous media - Method for measuring oxygen demand in a closed breathing apparatus
TS ISO 14851: 2002 / T1 (Number modification, TS EN ISO 14851) Determination of final aerobic biodegradability of plastic materials in aqueous media - Method for measuring oxygen demand in a closed breathing apparatus
TS EN ISO 14852 (Formerly: TS ISO 14852) Determination of the final aerobic biodegradability of plastic materials in water - Method of determination of released carbon dioxide
TS ISO 14852: 2002 / T1 (Number modification, TS EN ISO 14852) Determination of the final aerobic biodegradability of plastic materials in aqueous media - Method of determination of released carbon dioxide
TS EN ISO 14855-2 Determination of ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method of analysis of released carbon dioxide - Part 2: Gravimetric measurement of released carbon dioxide
TS EN 14987 Plastics - Evaluation of plastic disposability in wastewater treatment plants - Test scheme for final acceptance and properties
TS EN 14995 Plastics - Evaluation of composition stability - Test chart and properties
tst ISO 14855: 1999 Plastics - Determination of decomposition and final aerobic biodegradation under controlled digestion conditions - Method of analysis of released carbon dioxide
TS EN ISO 22088-1 Plastics - Determination of resistance to environmental stress cracking - Part 1: General guide
TS EN ISO 22088-6 Plastics - Determination of resistance to environmental stress cracking (wg) - Part 6: Low tensile speed method
TS EN ISO 22088-5Plastics - Determination of resistance to environmental stress cracking (çgç) - Part 5: Method of deformation under constant tensile