Our company professionally performs the test, audit, inspection and certification of all the standards mentioned below within the framework of customer satisfaction.
TS 1398-3 EN ISO 527-3 Plastics-Determination of tensile properties-Part 3: Test conditions for films and sheets
TS 7685 ISO 4593 Plastics-Film and sheets-Thickness determination by mechanical screening
TS EN ISO 12017 Plastics poly (methyl methacrylate) - Sheets - Two and three shells - Test methods
TS EN 12575 Plastics - Thermosetting molding compounds - Determination of moisture degree of fibers in smc
TS EN ISO 14631 Impact-modified polystyrene (ps-1) extruded sheets - Properties and test methods.
TS 6905 EN ISO 14632 Polyethylene sheets (pe-Hd) - Extruded - properties and test methods
TS 8455 EN ISO 14631 Impact-resistant polystyrene (ps-I) sheets - Extruded - Specifications and test methods
TS EN ISO 7765-1 (Formerly: TS ISO 7765-1) Plastic films and sheets-Determination of impact strength by free-falling mass method-Part 1: Ladder method
TS ISO 7765-2 Plastic films and sheets-Determination of impact strength by free falling mass method-Part 2: Instrument drilling test
S EN ISO 11501 Plastics-Films and sheets-Determination of temperature change with temperature effect
TS EN 13207 Thermoplastic silage films
TS EN ISO 14616 Plastics - Heat-shrinkable films of polyethylene, ethylene copolymers and mixtures thereof - Determination of shrinkage and tensile stresses
TS ISO 11501: 2003 / T1 Plastics-Films and sheets-Determination of size change with temperature effect
TS EN ISO 7823-2 Plastics - Poly (methyl methacrylate) sheets - types, dimensions and specifications - Part 2: Extruded sheets
TS EN 10131 Cold-rolled low-carbon and high yield strength flat steel products for cold forming, uncoated and zinc or electrolytically zinc-nickel coated - Dimension and shape tolerances
TS EN 263 Sanitary ware - Cross-linked cast acrylic sheets for bath tubs and shower trays for domestic use
TS EN ISO 15015 Plastics - Extruded sheets of impact modified acrylonitrile / styrene copolymers (asa, aes, acs) - Properties and test methods
TS ISO 124 Rubber latex- Determination of total solids content
TS EN ISO 7823-2 / tst T1Plastics - Poly (methyl methacrylate) sheets - types, dimensions and specifications - Part 2: Extruded sheets
TS EN ISO 11833-1 Plastics - Non-plasticized Polyvinyl Chloride Sheets - Types, Dimensions and Specifications - Part 1: 1 mm. ' Plates Not Thicker Than
TS EN ISO 11963 Plastics - Poly carbonate sheets - Types, dimensions and specifications
TS EN ISO 15527 Plastics - Mold compression of polyethylene - Requirements and test methods
TS EN 16240 Light-emitting solid solid polycarbonate (PC) sheets for interior and exterior use on roofs, walls and ceilings-Requirements and test methods
TS EN 15752-1 Glass for buildings - One-side self-adhesive polymeric film - Part 1: Definitions and requirements
TS EN 15755-1 Glass for buildings - One side self-adhesive polymeric film - Part 1: Definitions and requirements
TS EN 1013 + A1 Transparent, single-layer, plastic-profile sheets for use in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
TS EN 15752-1 Glass for buildings - One-side self-adhesive polymeric film - Part 1: Definitions and requirements
TS EN 15755-1 Glass for buildings - One side self-adhesive polymeric film - Part 1: Definitions and requirements
TS EN 1013 + A1 Transparent, single-skinned, corrugated plastic sheets for roofing, walls and ceilings indoors and outdoors - Requirements and test methods
TS EN 16153 + A1 Polycarbonate (PC) flat sheets - Transparent - Closed corrugated (with chamber) - Used in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
TS EN ISO 6383-1 Plastics - Film and sheets - Determination of tear strength - Part 1: Pantalon type tear method
tst EN 16153 + A1 Polycarbonate (PC) flat sheets - Transparent - Closed corrugated (with chamber) - Used in roofs, walls and ceilings indoors and outdoors - Requirements and test methods
tst 2016114259 Medical waste collection bag - Polyethylene (PE)
TS EN 13206: 2017 Thermoplastic coating films-used in horticulture
tst EN 13206 Thermoplastic coating films-Used in horticulture and agriculture
TS EN 263 Sanitary ware - Cross-linked cast acrylic sheets for bath tubs and shower trays for domestic use
TS EN ISO 6179 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber coated fabrics - Determination of the velocity of volatile liquids (gravimetric technique)
TS EN ISO 6383-1 (Formerly: TS ISO 6383-1) Plastics- Film and sheets- Determination of tear strength- Part 1: Pantalon type tear method
TS EN ISO 6383-2 (Formerly: TS ISO 6383-2) Plastics- Film and sheets- Determination of tear strength- Part 2: Elmendorf method
TS ISO 6383-2: 2001 / T1 (Number amendment, TS EN ISO 6383-2) Plastics- Film and sheets- Determination of tear strength- Part 2: Elmendorf method
TS 7237 ISO 4592 Plastics-Films and sheets-Determination of length and width
TS 7663 ISO 4591 Plastics-Films and sheets-Determination of the average thickness of a sample and the average thickness and yield of a roll by gravimetric techniques (gravimetric thickness)
TS ISO 7765-1: 2003 / T1 (Number modification, TS EN ISO 7765-1) Plastic films and sheets - Determination of impact strength by free falling mass method - Part 1: Ladder method
TS EN ISO 7823-1 Plastics - Poly (methyl methacrylate) sheets - Types, dimensions and specifications - Part 1: Cast sheets
TS EN ISO 7823-3 Plastics - Thermoplastic polyester (tp) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
TS EN ISO 7823-2 Plastics - Poly (methyl methacrylate) sheets - types, dimensions and specifications - Part 2: Extruded sheets
TS EN ISO 8295 Plastics - Films and sheets - Determination of coefficient of friction
TS ISO 8296 Plastics-Films and sheets-Determination of wetting resistance
TS ISO 8570 Plastics - Film and sheets - Determination of the refraction temperature in cold
tst 10363 EN ISO 8295 Plastics - Film and sheets - Determination of coefficient of friction
TS EN ISO 11502 Plastics-Films and sheets-Determination of blocking resistance
TS EN ISO 11833-2 (Formerly: TS ISO 11833-2) Plastics - Polyvinylchloride sheets without plasticizers - Types, dimensions and specifications - Part 2: Plates of thickness less than 1mm
TS ISO 11833-2 / T1 (Number modification: TS EN ISO 11833-2) Plastics - Non-plasticized polyvinylchloride sheets - Types, dimensions and specifications - Part 2: Plates with thickness less than 1mm
TS EN 12576 Plastics - Fiber reinforced composites - Preparation of test plates for smc, bmc and dmc by pressure molding
TS EN 13655 Plastics - Thermoplastic films used as cover in horticultural and field agriculture
TS EN 14932 Plastics - Flexible thermoplastic films for wrapping packages - Specification and test methods
TS EN ISO 15013 Plastics - Extruded polypropylene (pp) sheets - Specification and test methods
TS EN ISO 15106-1 Plastics - Film and sheets - Determination of water vapor permeation rate - Part 1: Moisture detection sensor method
TS EN ISO 15106-2 Plastics - Film and sheets - Determination of water vapor permeation rate - Part 2: Infrared radiation detection sensor method
TS EN ISO 15106-3 Plastics - Film and sheets - Determination of water vapor permeation rate - Part 3: Electrolytic detection sensor method