We provide professional testing, inspection, inspection and certification services with all internationally approved standards given below.
TS 1531 ISO 1629 Rubbers and latex-designations
TS 1936 ISO 1652 Rubber latex-Determination of vistosity
TS 1883 ISO 705Determination of rubber latex 5 ° c-40 ° c
TS EN ISO 9702 Plastics - Amine epoxide hardeners - Nitrogen determination - Primary, secondary and tertiary amine groups
tst ISO 11235 Rubber pulp additives - Sulfonamide accelerators - Test methods
TS EN ISO 1043-4 Plastics - Symbols and abbreviated terms section 4: Flame retardants
TS EN ISO 1043-4 Plastics-Symbols and abbreviated terms-Part 4: Flame retardants
TS ISO 6235 Determination of the raw-block polystyrene content of rubber - Ozonation method
TS EN ISO 1043-2 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
TS ISO 7780 Raw rubber and rubber latex - Determination of manganese content - Sodium periodate photometric method
TS EN 13900-6 Pigments and additives - Dispersion in plastics and methods for evaluation of dispersion - Part 6: Determination by film test
TS EN 12091 Thermal insulation materials - For buildings - Freezing - Determination of thaw resistance
TS ISO 6472 Rubber compound additives - Abbreviations
TS ISO 12000 Plastics / rubber - Polymer dispersions and rubber latexes (natural and synthetic) - Definitions and examination of test methods
TS ISO 2006-1 Synthetic rubber latex - Determination of mechanical stability - Part 1: High speed method
TS ISO 2006-2 Synthetic rubber latex - Determination of mechanical stability - Part 2: Medium speed method under load
TS ISO 7323 Tires - Raw and vulcanized rubber pulp - Determination of plasticity and return number - Parallel plate method
TS ISO 11235 Rubber pulp additives - Sulfenamide accelerators - Test methods
TS ISO 1138 Rubber pulp additives - Carbon black - Determination of sulfur
TS ISO 1138 / A1 Rubber pulp additives - Carbon black - Determination of sulfur - Clarification of decomposition temperature in 3.4.5 subheading
Plastics - Symbols and abbreviated terms section 1043: Flame retardants TS EN ISO 4-1999: 1 / A4 Plastics
TS EN ISO 1043-3 Plastics-Symbols and abbreviated terms-Part 3: Plasticizers
Biological based carbon content - Determination of biocompatible carbon content by using radiocarbon method
TS ISO 123 Rubber latex-Sampling
TS 333 ISO 125 Natural rubber latex concentrates - Determination of base
TS 335 ISO 127 Rubber, natural latex concentrate - Koh number determination
TS 336 ISO 247 Rubber - Determination of ash
TS 337 ISO 248 Rubber, raw - Determination of volatile matter
TS 360 ISO 249 Raw, natural rubber-Determination of foreign matter
TS ISO 498 Rubber latex concentrate - Preparation of dry films
TS 608 ISO 506 Natural rubber latex - Concentrate determination of the number of essential fatty acids
TS ISO 1125 Rubber dough additives - Determination of carbon black ash
TS ISO 1126 Rubber compound additives - Carbon black - Determination of heating loss
TS ISO 1147 Plastics / rubber-Polymer dispersions and synthetic rubber latexes-Freeze-Melt cycle stability test
TS ISO 1304 Rubber pulp additives - Carbon black - Determination of the number of iodine adsorption
TS ISO 1306 Rubber compound additives - Carbon black (pelleted) - Determination of bulk density
TS ISO 1409 Plastics / rubber-polymer dispersions and rubber braids (natural and synthetic)
TS ISO 1435 Rubber pulp additives - Carbon black (pelleted) - Determination of under-content
TS 1436 ISO 976Rubbers and plastics - Polymer dispersions and rubber latexes - Determination of Ph
TS ISO 1437 Rubber pulp additives - Carbon black - Determination of sieve residue
TS 1623 EN ISO 1061 (Formerly: TS 1623 ISO 1061) Plastics-Determination of free acidity of cellulose acetate without added plasticizer
TS 1757 ISO 1795 Rubber-Raw-Natural and synthetic sampling and preparation
TS 1760 ISO 1656 Rubber-Raw natural rubber and natural rubber latex-Determination of the percentage of nitrogen
TS ISO 1802 Natural rubber latex concentrate - Determination of boric acid content
TS ISO 2000 Rubber, raw natural-technical guide for specification
TS ISO 2004 Natural rubber latex concentrate-Centrifuged or creamed, ammonia-protected types
TS ISO 2005 Natural rubber latex concentrate - Determination of sediment content
TS 2610 ISO 2453 Raw rubber-Styrene butadiene-Emulsion polymerized-Determination of bound styrene content -Refractive index method
TS 2845 ISO 2008 Determination of rubber latex, styrene-Butadiene-Unsaturated volatile components
TS ISO 2930 Natural raw rubber - Determination of plasticity index (PRI)
TS ISO 3257 Tire additives - Carbon black - Method for the evaluation of styrene-butadiene tires
TS 3564 ISO 2007 Rubber, non-vulcanized-Determination of plasticization property-Rapid plastimetry method
TS ISO 3858 Rubber pulp additives - Carbon black - Determination of light transmittance of toluene extract
TS ISO 3899 Rubber-Nitrile latex-Determination of residual acrylonitrile content
TS ISO 3900 Determination of rubber-nitrile latex-bound acrylonitrile content
TS 4526 ISO 4660 Rubber, natural raw color index test
TS ISO 4656-1 Rubber pulp additives - Carbon black - Determination of the absorption number of dibutyl phthalate - Part 1: Absorptometric method
TS EN ISO 5264-2: 2011 Paper pulps - Laboratory grinding - Section 2: Pfi grinding method
TS ISO 5435 Rubber compound additives - Carbon black - Determination of tint strength
TS ISO 5794-1 Rubber dough additives-Silica, precipitated, hydrated-Part 1: Non-tire tests
TS ISO 5796 Rubber pulp additives-Natural calcium carbonate-Test methods
TS ISO 6209 Tire additives - Carbon black - Determination of extractables
TS ISO 6225-2 Natural raw rubber - Determination of castor oil content - Part 2: Determination of total ricinoleic acid content - Gas chromatography method
TS 6682 ISO 4652-1 Tires-Rubber pulp additives-Determination of carbon black specific surface area by nitrogen adsorption method-Part 1: Single point methods
TS 6684 ISO 4656-2 Tires-Rubber pulp additives-Carbon black-Determination of dibutyl phthalate absorption number-Part 2: Method using plastograph or plastic border
TS EN ISO 7327 Plastics - Hardeners and accelerators for epoxy resins - Determination of acid anhydride and free acid
TS ISO 8511 Rubber pulp additives - Carbon black - Determination of pellet size distribution
TS 8759 ISO 14898 Plastics - Aromatic isocyanates used in the production of polyurethane - Determination of acidity
TS EN ISO 9702 Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content
TS ISO 11236 Rubber pulp additives-P-Phenylenediamine (ppd) degradation inhibitors-Test methods
TS EN 12877-1 Coloring agents - Used in plastics - Determination of color stability of colorants during heat treatment - Part 1: General information
TS EN 12877-2 Coloring agents - Used in plastics - Determination of color stability of colorants against heat during processing of plastics - Part 2: Determination by injection molding
TS EN 12877-3 Coloring agents - Used in plastics - Determination of color stability of colorants against heat during processing of plastics - Part 3: Test for determination by oven
TS EN 12877-4 Coloring agents - Used in plastics - Determination of color stability of colorants against heat during processing of plastics - Part 4: Determination by double roll grinder
TS EN 13900-1 Pigments and additives - Dispersion methods and evaluation of dispersibility in plastics - Part 1: General information
TS EN 13900-2 Pigments and additives - Dispersion methods and evaluation of dispersibility in plastics - Part 2: Determination of ease of dispersion and color properties in plasticized polyvinylchloride by double roll mill
TS EN 13900-3 Pigments and additives - Dispersion methods and evaluation of dispersibility in plastics - Part 3: Determination of ease of dispersion and color properties of black and colored pigmnets in polyethylene with a double roller mill
TS EN 13900-4 Pigments and additives - Dispersion methods and evaluation of dispersibility in plastics - Part 4: Determination of ease of dispersion and color properties of white pigments by using a double roller mill in polyethylene
TS EN 13900-5 Pigments and additives - Dispersion methods and evaluation of dispersibility in plastics - Part 5: Determination by filtration test
TS EN 13925-3 Non-destructive testing - X-ray diffraction in polycrystalline and amorphous materials - Part 3: Devices 15.02.2006 83.040.30
TS EN 14469-1 Pigments and additives - Determination of coloring agents in poly (vinyl chloride) (pvc-P) with plasticizer - Part 1: Composition and preparation of main mixtures
TS EN 14469-2 Pigments and additives - Determination of colorants in poly (vinyl chloride) (pvc-P) with plasticizer - Part 2: Preparation of test specimens
TS EN 14469-3 Pigments and additives - Determination of coloring agents in poly (vinyl chloride) (pvc-P) with plasticizer - Part 3: Determination of the relative coloring power of white pigments
TS EN 14469-4 Pigments and additives - Determination of colorants in poly (vinyl chloride) (pvc-P) with plasticizer - Part 4: Determination of color flow of colorants
TS ISO 15038 Plastics - Organic-Perester cross-linking reagents for unsaturated polyester thermosetting materials - Determination of active oxygen content
TS ISO 15672 Tire and tire additives - determination of total nitrogen content using automatic analyzer
TS ISO 17710 Plastics - Polyols used in polyurethane manufacturing - Determination of unsaturation degree by microtitration
Biological based carbon content - Determination of biocompatible carbon content by using radiocarbon method
TS 8759 ISO 14898 Plastics - Aromatic isocyanates used in the production of polyurethane - Determination of acidity