The standards required for the process from production to sale within the scope of rubber are as follows. We provide testing, inspection, inspection and certification services for all of the following standards.
TSE ISO / TR 7664 Rubber - Natural and synthetic - Raw solid - General rules for storage
TS 1851 ISO 1407 Rubbers-Solvent extractable determination
TS 1966 ISO 35 Natural rubber latex - Concentrated determination of mechanical stability
TS EN 2259 Aviation series - Silicone rubber (VMQ) - 50 IRHD hardness
TS 4698 ISO 34-1 Tires and thermoplastics-Determination of tear strength section 1: With test pieces in strip, open and moon form
TS EN 13787 Elastomers for gas pressure regulators and associated safety devices in systems with inlet pressure up to 100 bar
TS ISO 4664-2 Tire - Vulcanized or thermoplastic - Determination of dynamic properties - Part 2: Pendulum torsion methods at low frequencies
TS EN 681-1 / AC Elastomeric seals - For water and drainage applications - Material specifications - Part 1: Rubber
TS EN 681-1 / T1 Elastomeric seals - Used in water and drainage applications - Material specifications - Part 1: Rubber
TS ISO 23529 Tires - General procedures for the preparation and conditioning of test pieces for physical test methods
TS ISO 7780 Raw rubber and rubber latex - Determination of manganese content - Sodium periodate photometric methodTS ISO 188Lastics - Vulcanized or thermoplastic - Accelerated aging and heat resistance tests
TS ISO 37 Tires and thermoplastics - Tensile stress - Determination of elongation properties
TS ISO 188 Tires - Vulcanized or thermoplastic - Accelerated aging and heat resistance tests
TS ISO 8013 Rubber, vulcanized - Determination of creep or shear under pressure
TS ISO 48 Rubber-Vulcanized or thermoplastic-Hardness determination (10 armor-100 armor hardness range)
TS ISO 2781 Vulcanized rubber - Determination of density
tst ISO 8013 Rubber, vulcanized - Determination of creep or shear under pressure
TS ISO 1817 Tires-Determination of the effect of liquids
TS ISO 4649 Tires - vulcanized or thermoplastic - Determination of abrasion resistance by means of a rotating cylindrical drum
TS ISO 7663 Evaluation of the vulcanization properties of halogenated isobutene-isoprene rubber (BIIR, CIIR)
TS ISO 34-2 Tires or thermoplastics - Determination of tear strength - Part 2: Small (delft) test pieces
TS ISO 7270-1 Tires - Pyrolytic gas analysis - chromatographic methods - Part 1: Identification of polymers (single polymers and mixtures)
TS ISO 7270-1 / A1 Tires - Pyrolytic gas analysis - chromatographic methods - Part 1: Identification of polymers (single polymers and mixtures)
TS ISO 7270-2 Tires - Pyrolytic gas analysis - chromatographic methods - Part 2: Determination of styrene / butadiene / isoprene ratio
TS ISO 12965 / Cor 1 Butadiene rubber - Determination of microstructure by infrared spectrometric method
TS ISO 16565 Determination of 5-Ethylidene norbornene (enb) or dicyclopentadiene (dcpd) in rubber-ethylene-propylene-diene (epdm) terpolymers
TS ISO 4666-2 Tires-Determination of temperature rise and fatigue resistance by flexometer test-Part 2: Rotary flexometer
TS ISO 4666-3 Tires-Determination of temperature rise and fatigue resistance with flexometer test-Part 3: Compression flexometer
TS ISO 4666-1 Tires - Determination of temperature rise and fatigue resistance by flexometer test - Part 1: Basic principles
TS ISO 4666-4 Tires - Determination of temperature rise and fatigue resistance by flexometer test - Part 1: Basic principles
TS ISO 2921 Vulcanized rubber - Determination of low temperature shrinkage (TR test)
TS ISO 8053 Rubber and latex - Determination of copper content - Photometric method
TS ISO 4635 Tires-Preformed joint fillers-For joints between concrete pavements on highways
TS ISO 7323 Tires - Raw and vulcanized rubber pulp - Determination of plasticity and return number - Parallel plate method
TS ISO 2230 Rubber products - Storage rules
TS ISO 1853 Conductive and damping rubber, vulcanized or thermoplastic - Measurement of resistivity
TS ISO 13226 Rubber - Standard reference elastomers (SRE) that characterize the effect of liquids on vulcanized rubbers
TS ISO 36 Determination of adhesion to rubber-vulcanized or thermoplastic-textile fabrics
TS ISO 132 Determination of rubber-vulcanized or thermoplastic-bending cracking and crack growth (de mattia)
TS ISO 7269 Tech.Corr.1 Tires - Determination of free sulfur
TS ISO 813 Determination of adhesion to a rubber-vulcanized and thermoplastic-rigid support material
TS ISO 814 Rubber-Vulcanized-Determination of adhesion to metal-Double plate method
TS EN ISO 868 Determination of stiffness of plastics and ebonite by shear hardness
TS ISO 1431-3 Tires and thermoplastics - Determination of resistance to ozone cracking part 3: Test methods for the determination of ozone concentration
TS ISO 1431-1 Tires and thermoplastics - Determination of resistance to ozone cracking part 1: Static and dynamic tensile test
TS ISO 1432 Rubber-Vulcanized or thermoplastic-Determination of tightness at low temperatures (gehman test)
TS 1852 ISO 1408 Tires-Determination of carbon black percentage-Pyrolytic and chemical decomposition methods
TS 2009-1 ISO 289-1 Rubbers-Unvulcanized-Determination by viscometer with shear disk section 1: Determination of Mooney viscosity
TS 2009-2 ISO 289-2 Rubbers-Unvulcanized-Determination by viscometer with shear disk section 2: Determination of pre-vulcanization properties
TS ISO 2303 Tires-Isoprene tire-Evaluation of vulcanization properties obtained by oil-free solution polymerization
TS ISO 2322 Styrene-Butadiene rubber (sbr) - Emulsion and solution polymerized types-Evaluation procedures
TS ISO 2454 Rubber products - Determination of zinc content - Titrimetric method with Edta
TS ISO 2475 Chloroprene rubber (cr) - General purpose types - Evaluation process
TS 2859 ISO 1827 Rubber, vulcanized or thermoplastic-Determination of the bonding strength of cutting module or rigid plates-Quadrupole cutting method
TS 3047 ISO 812 Tires - Determination of low temperature brittleness
TS ISO 3387 Determination of degree of crystallization by rubber-hardness measurements
TS 3422 ISO 2476 Rubber-Butadiene (br) - Solution polymerized types evaluation processes
TS 3436 ISO 3417 Measurement of rubber-vulcanization properties by oscillating disc curmeter
TS 3484 ISO 1658 Natural rubber - Evaluation process
TS 3872 ISO 3865 Determination methods of staining in contact with rubber-organic materials
TS 4595 ISO 815 Tire and thermoplastics - Determination of permanent crush rate under pressure at ambient, high or low temperatures
TS ISO 4658 Acrylonitrile-Butadiene-Rubber (nbr) - Evaluation process
TS ISO 4659 Styrene-Butadiene rubber (carbon black or oil added) - Evaluation process
TS ISO 4664-1 Tire - Vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guide
TS ISO 4665 Rubber - Vulcanized or thermoplastic - Resistance to climatic conditions
TS 4699 ISO 2878 Tires-Antistatic and conductive products-Determination of electrical resistances
TS 4999 ISO 4097 Rubber-Ethylene, propylene, diene (epdm) -General purpose types-Evaluation procedures
TS 5323 ISO 3384 Tires and thermoplastics-Determination of the rate of reduction of the counter-force occurring under pressure at ambient and elevated temperatures over time
TS 5515 ISO 2302 Rubber-Isobutene, isoprene
TS ISO 5945 Tire - Determination of polyisoprene content
TS ISO 6101-2 Determination of metal content by rubber-atomic absorption spectrometer-Part 2: Determination of lead content
TS ISO 6133 Rubber and plastics-Analysis of multiple peaks obtained in the determination of tear strength and adhesion strength
TS ISO 6471 Rubber, vulcanized-Determination of degree of crystallization under load
TS ISO 6505 Determination of adhesion and corrosion tendency to rubber-vulcanized or thermoplastic-metals
TS ISO 7269 Tires - Determination of free sulfur
TS 7494 ISO 5478 Determination of rubber-styrene content-Nitrolation method
TS ISO 7619-2 Tire - Vulcanized or thermoplastic - Determination of notch hardness - Part 2: Method of measurement with pocket type armor
TS 8014 ISO 6101-1 Rubber-Metal determination-Atomic absorption spectrometric method part 1: Determination of zinc
TS 8447 ISO 4650 Rubber-Infared spectrometric method
TS 8942 ISO 6528-2 Rubber-Determination of total sulfur content part 2: Sodium peroxide melting method
TS 8969 ISO 6502 Determination of vulcanization properties of rubbers with non-rotating curmeter
TS ISO 9924-1 Rubber and rubber products - Determination of the composition of vulcanizates and uncured doughs by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
TS ISO 12965 Butadiene rubber - Microstructure determination by infrared spectrometric method
TS ISO 15672 Tire and tire additives - determination of total nitrogen content using automatic analyzer